/* * This file is part of the libsigrok project. * * Copyright (C) 2014 Daniel Elstner * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef LIBSIGROK_HARDWARE_SYSCLK_LWLA_PROTOCOL_H #define LIBSIGROK_HARDWARE_SYSCLK_LWLA_PROTOCOL_H #define LOG_PREFIX "sysclk-lwla" #include #include #include #include #include #define VENDOR_NAME "SysClk" /* Maximum configurable sample count limit. * Due to compression, there is no meaningful hardware limit the driver * could report. So this value is less than 2^64-1 for no reason other * than to safeguard against integer overflows. */ #define MAX_LIMIT_SAMPLES (UINT64_C(1000) * 1000 * 1000 * 1000) /* Maximum configurable acquisition time limit. * Due to compression, there is no hardware limit that would be meaningful * in practice. However, the LWLA1016 reports the elapsed time as a 32-bit * value, so keep this below 2^32. */ #define MAX_LIMIT_MSEC (1000 * 1000 * 1000) struct acquisition_state; /* USB vendor and product IDs. */ enum { USB_VID_SYSCLK = 0x2961, USB_PID_LWLA1016 = 0x6688, USB_PID_LWLA1034 = 0x6689, }; /* USB device characteristics. */ enum { USB_CONFIG = 1, USB_INTERFACE = 0, USB_TIMEOUT_MS = 3000, }; /** USB device end points. */ enum usb_endpoint { EP_COMMAND = 2, EP_CONFIG = 4, EP_REPLY = 6 | LIBUSB_ENDPOINT_IN }; /** LWLA1034 clock sources. */ enum clock_source { CLOCK_INTERNAL = 0, CLOCK_EXT_CLK, }; /** LWLA1034 trigger sources. */ enum trigger_source { TRIGGER_CHANNELS = 0, TRIGGER_EXT_TRG, }; /** Edge choices for the LWLA1034 external clock and trigger inputs. */ enum signal_edge { EDGE_POSITIVE = 0, EDGE_NEGATIVE, }; /* Common indicator for no or unknown FPGA config. */ enum { FPGA_NOCONF = -1, }; /** Acquisition protocol states. */ enum protocol_state { /* idle states */ STATE_IDLE = 0, STATE_STATUS_WAIT, /* device command states */ STATE_START_CAPTURE, STATE_STOP_CAPTURE, STATE_READ_PREPARE, STATE_READ_FINISH, /* command followed by response */ STATE_EXPECT_RESPONSE = 1 << 3, STATE_STATUS_REQUEST = STATE_EXPECT_RESPONSE, STATE_LENGTH_REQUEST, STATE_READ_REQUEST, }; /** Private, per-device-instance driver context. */ struct dev_context { uint64_t samplerate; /* requested samplerate */ uint64_t limit_msec; /* requested capture duration in ms */ uint64_t limit_samples; /* requested capture length in samples */ uint64_t channel_mask; /* bit mask of enabled channels */ uint64_t trigger_mask; /* trigger enable mask */ uint64_t trigger_edge_mask; /* trigger type mask */ uint64_t trigger_values; /* trigger level/slope bits */ const struct model_info *model; /* device model descriptor */ struct acquisition_state *acquisition; /* running capture state */ int active_fpga_config; /* FPGA configuration index */ enum protocol_state state; /* async protocol state */ gboolean cancel_requested; /* stop after current transfer */ gboolean transfer_error; /* error during device communication */ gboolean cfg_rle; /* RLE compression setting */ enum clock_source cfg_clock_source; /* clock source setting */ enum signal_edge cfg_clock_edge; /* ext clock edge setting */ enum trigger_source cfg_trigger_source; /* trigger source setting */ enum signal_edge cfg_trigger_slope; /* ext trigger slope setting */ }; /** LWLA model descriptor. */ struct model_info { char name[12]; int num_channels; unsigned int num_devopts; uint32_t devopts[8]; unsigned int num_samplerates; uint64_t samplerates[20]; int (*apply_fpga_config)(const struct sr_dev_inst *sdi); int (*device_init_check)(const struct sr_dev_inst *sdi); int (*setup_acquisition)(const struct sr_dev_inst *sdi); int (*prepare_request)(const struct sr_dev_inst *sdi); int (*handle_response)(const struct sr_dev_inst *sdi); }; SR_PRIV const struct model_info lwla1016_info; SR_PRIV const struct model_info lwla1034_info; SR_PRIV int lwla_start_acquisition(const struct sr_dev_inst *sdi); #endif