/* * This file is part of the sigrok project. * * Copyright (C) 2010 Bert Vermeulen * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef SIGROK_SIGROK_H #define SIGROK_SIGROK_H #include #include #include #include #include #include /* * Status/error codes returned by libsigrok functions. * * All possible return codes of libsigrok functions must be listed here. * Functions should never return hardcoded numbers as status, but rather * use these #defines instead. All error codes are negative numbers. * * The error codes are globally unique in libsigrok, i.e. if one of the * libsigrok functions returns a "malloc error" it must be exactly the same * return value as used by all other functions to indicate "malloc error". * There must be no functions which indicate two different errors via the * same return code. * * Also, for compatibility reasons, no defined return codes are ever removed * or reused for different #defines later. You can only add new #defines and * return codes, but never remove or redefine existing ones. */ #define SIGROK_OK 0 /* No error */ #define SIGROK_ERR -1 /* Generic/unspecified error */ #define SIGROK_ERR_MALLOC -2 /* Malloc/calloc/realloc error */ #define SIGROK_ERR_SAMPLERATE -3 /* Incorrect samplerate */ /* Handy little macros */ #define KHZ(n) ((n) * 1000) #define MHZ(n) ((n) * 1000000) #define GHZ(n) ((n) * 1000000000) #ifndef ARRAY_SIZE #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) #endif /* Data types, used by hardware plugins for set_configuration() */ enum { T_UINT64, T_CHAR, }; enum { PROTO_RAW, }; /* (Unused) protocol decoder stack entry */ struct protocol { char *name; int id; int stackindex; }; /* * Datafeed */ /* datafeed_packet.type values */ enum { DF_HEADER, DF_END, DF_TRIGGER, DF_LOGIC8, DF_LOGIC16, DF_LOGIC24, DF_LOGIC32, DF_LOGIC48, DF_LOGIC64, }; struct datafeed_packet { uint16_t type; uint16_t length; void *payload; }; struct datafeed_header { int feed_version; struct timeval starttime; uint64_t samplerate; int protocol_id; int num_probes; }; /* * Output */ struct output { struct output_format *format; struct device *device; char *param; void *internal; }; struct output_format { char *extension; char *description; int (*init) (struct output *o); int (*data) (struct output *o, char *data_in, uint64_t length_in, char **data_out, uint64_t *length_out); int (*event) (struct output *o, int event_type, char **data_out, uint64_t *length_out); }; struct output_format **output_list(void); int filter_probes(int in_unitsize, int out_unitsize, int *probelist, char *data_in, uint64_t length_in, char **data_out, uint64_t *length_out); char *sigrok_samplerate_string(uint64_t samplerate); /*--- analyzer.c ------------------------------------------------------------*/ struct analyzer { char *name; char *filename; /* * TODO: Parameters? If so, configured plugins need another struct. * TODO: Input and output format? */ }; /*--- backend.c -------------------------------------------------------------*/ int sigrok_init(void); void sigrok_cleanup(void); /*--- datastore.c -----------------------------------------------------------*/ /* Size of a chunk in units */ #define DATASTORE_CHUNKSIZE 512000 struct datastore { /* Size in bytes of the number of units stored in this datastore */ int ds_unitsize; unsigned int num_units; GSList *chunklist; }; struct datastore *datastore_new(int unitsize); void datastore_destroy(struct datastore *ds); void datastore_put(struct datastore *ds, void *data, unsigned int length, int in_unitsize, int *probelist); /*--- debug.c ---------------------------------------------------------------*/ void hexdump(unsigned char *address, int length); /*--- device.c --------------------------------------------------------------*/ /* * This represents a generic device connected to the system. * For device-specific information, ask the plugin. The plugin_index refers * to the device index within that plugin; it may be handling more than one * device. All relevant plugin calls take a device_index parameter for this. */ struct device { /* Which plugin handles this device */ struct device_plugin *plugin; /* A plugin may handle multiple devices of the same type */ int plugin_index; /* List of struct probe* */ GSList *probes; /* Data acquired by this device, if any */ struct datastore *datastore; }; struct probe { int index; gboolean enabled; char *name; char *trigger; }; extern GSList *devices; void device_scan(void); void device_close_all(void); GSList *device_list(void); struct device *device_new(struct device_plugin *plugin, int plugin_index); void device_clear(struct device *device); void device_destroy(struct device *dev); void device_probe_clear(struct device *device, int probenum); void device_probe_add(struct device *device, char *name); struct probe *probe_find(struct device *device, int probenum); void device_probe_name(struct device *device, int probenum, char *name); void device_trigger_clear(struct device *device); void device_trigger_set(struct device *device, int probenum, char *trigger); /*--- hwplugin.c ------------------------------------------------------------*/ /* Hardware plugin capabilities */ enum { HWCAP_DUMMY, /* Used to terminate lists */ HWCAP_LOGIC_ANALYZER, HWCAP_SAMPLERATE, /* Change samplerate */ HWCAP_PROBECONFIG, /* Configure probe mask */ HWCAP_CAPTURE_RATIO, /* Set pre-trigger / post-trigger ratio */ HWCAP_LIMIT_MSEC, /* Set a time limit for sample acquisition */ HWCAP_LIMIT_SAMPLES, /* Set a limit on number of samples */ }; struct hwcap_option { int capability; int type; char *description; char *shortname; }; struct sigrok_device_instance { int index; int status; int instance_type; char *vendor; char *model; char *version; union { struct usb_device_instance *usb; struct serial_device_instance *serial; }; }; /* sigrok_device_instance types */ enum { USB_INSTANCE, SERIAL_INSTANCE, }; struct usb_device_instance { uint8_t bus; uint8_t address; struct libusb_device_handle *devhdl; }; struct serial_device_instance { char *port; int fd; }; /* Device instance status */ enum { ST_NOT_FOUND, /* Found, but still booting */ ST_INITIALIZING, /* Live, but not in use */ ST_INACTIVE, /* Actively in use in a session */ ST_ACTIVE, }; /* * TODO: This sucks, you just kinda have to "know" the returned type. * TODO: Need a DI to return the number of trigger stages supported. */ /* Device info IDs */ enum { /* struct sigrok_device_instance for this specific device */ DI_INSTANCE, /* The number of probes connected to this device */ DI_NUM_PROBES, /* Samplerates supported by this device, (struct samplerates) */ DI_SAMPLERATES, /* Types of trigger supported, out of "01crf" (char *) */ DI_TRIGGER_TYPES, /* The currently set samplerate in Hz (uint64_t) */ DI_CUR_SAMPLERATE, }; /* * A device supports either a range of samplerates with steps of a given * granularity, or is limited to a set of defined samplerates. Use either * step or list, but not both. */ struct samplerates { uint64_t low; uint64_t high; uint64_t step; uint64_t *list; }; struct device_plugin { /* Plugin-specific */ char *name; int api_version; int (*init) (char *deviceinfo); void (*cleanup) (void); /* Device-specific */ int (*open) (int device_index); void (*close) (int device_index); void *(*get_device_info) (int device_index, int device_info_id); int (*get_status) (int device_index); int *(*get_capabilities) (void); int (*set_configuration) (int device_index, int capability, void *value); int (*start_acquisition) (int device_index, gpointer session_device_id); void (*stop_acquisition) (int device_index, gpointer session_device_id); }; struct gsource_fd { GSource source; GPollFD gpfd; /* Not really using this */ GSource *timeout_source; }; typedef int (*receive_data_callback) (int fd, int revents, void *user_data); int load_hwplugins(void); GSList *list_hwplugins(void); /* Generic device instances */ struct sigrok_device_instance *sigrok_device_instance_new(int index, int status, char *vendor, char *model, char *version); struct sigrok_device_instance *get_sigrok_device_instance( GSList *device_instances, int device_index); void sigrok_device_instance_free(struct sigrok_device_instance *sdi); /* USB-specific instances */ struct usb_device_instance *usb_device_instance_new(uint8_t bus, uint8_t address, struct libusb_device_handle *hdl); void usb_device_instance_free(struct usb_device_instance *usb); /* Serial-specific instances */ struct serial_device_instance *serial_device_instance_new(char *port, int fd); void serial_device_instance_free(struct serial_device_instance *serial); int find_hwcap(int *capabilities, int hwcap); struct hwcap_option *find_hwcap_option(int hwcap); void source_remove(int fd); void source_add(int fd, int events, int timeout, receive_data_callback rcv_cb, void *user_data); /*--- session.c -------------------------------------------------------------*/ typedef void (*source_callback_remove) (int fd); typedef void (*source_callback_add) (int fd, int events, int timeout, receive_data_callback callback, void *user_data); typedef void (*datafeed_callback) (struct device *device, struct datafeed_packet *packet); struct session { /* List of struct device* */ GSList *devices; /* List of struct analyzer* */ GSList *analyzers; /* Datafeed callbacks */ GSList *datafeed_callbacks; GTimeVal starttime; }; /* Session setup */ struct session *session_load(const char *filename); struct session *session_new(void); void session_destroy(void); void session_device_clear(void); int session_device_add(struct device *device); /* Protocol analyzers setup */ void session_pa_clear(void); void session_pa_add(struct analyzer *pa); /* Datafeed setup */ void session_datafeed_callback_clear(void); void session_datafeed_callback_add(datafeed_callback callback); /* Session control */ int session_start(void); void session_stop(void); void session_bus(struct device *device, struct datafeed_packet *packet); void make_metadata(char *filename); int session_save(char *filename); /*--- hwcommon.c ------------------------------------------------------------*/ int ezusb_reset(struct libusb_device_handle *hdl, int set_clear); int ezusb_install_firmware(libusb_device_handle *hdl, char *filename); int ezusb_upload_firmware(libusb_device *dev, int configuration, const char *filename); GSList *list_serial_ports(void); int serial_open(const char *pathname, int flags); int serial_close(int fd); void *serial_backup_params(int fd); void serial_restore_params(int fd, void *backup); int serial_set_params(int fd, int speed, int bits, int parity, int stopbits, int flowcontrol); #endif