/* * This file is part of the libsigrok project. * * Copyright (C) 2010 Sven Peter * Copyright (C) 2010 Haxx Enterprises * All rights reserved. * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ #include #include "libsigrok.h" #include "libsigrok-internal.h" #include "analyzer.h" #include "gl_usb.h" #include "protocol.h" enum { HARD_DATA_CHECK_SUM = 0x00, PASS_WORD, DEV_ID0 = 0x10, DEV_ID1, START_STATUS = 0x20, DEV_STATUS = 0x21, FREQUENCY_REG0 = 0x30, FREQUENCY_REG1, FREQUENCY_REG2, FREQUENCY_REG3, FREQUENCY_REG4, MEMORY_LENGTH, CLOCK_SOURCE, TRIGGER_STATUS0 = 0x40, TRIGGER_STATUS1, TRIGGER_STATUS2, TRIGGER_STATUS3, TRIGGER_STATUS4, TRIGGER_STATUS5, TRIGGER_STATUS6, TRIGGER_STATUS7, TRIGGER_STATUS8, TRIGGER_COUNT0 = 0x50, TRIGGER_COUNT1, TRIGGER_LEVEL0 = 0x55, TRIGGER_LEVEL1, TRIGGER_LEVEL2, TRIGGER_LEVEL3, RAMSIZE_TRIGGERBAR_ADDRESS0 = 0x60, RAMSIZE_TRIGGERBAR_ADDRESS1, RAMSIZE_TRIGGERBAR_ADDRESS2, TRIGGERBAR_ADDRESS0, TRIGGERBAR_ADDRESS1, TRIGGERBAR_ADDRESS2, DONT_CARE_TRIGGERBAR, FILTER_ENABLE = 0x70, FILTER_STATUS, ENABLE_DELAY_TIME0 = 0x7a, ENABLE_DELAY_TIME1, ENABLE_INSERT_DATA0 = 0x80, ENABLE_INSERT_DATA1, ENABLE_INSERT_DATA2, ENABLE_INSERT_DATA3, COMPRESSION_TYPE0, COMPRESSION_TYPE1, TRIGGER_ADDRESS0 = 0x90, TRIGGER_ADDRESS1, TRIGGER_ADDRESS2, NOW_ADDRESS0 = 0x96, NOW_ADDRESS1, NOW_ADDRESS2, STOP_ADDRESS0 = 0x9b, STOP_ADDRESS1, STOP_ADDRESS2, READ_RAM_STATUS = 0xa0, }; static int g_trigger_status[9] = { 0 }; static int g_trigger_count = 1; static int g_filter_status[8] = { 0 }; static int g_filter_enable = 0; static int g_freq_value = 1; static int g_freq_scale = FREQ_SCALE_MHZ; static int g_memory_size = MEMORY_SIZE_8K; static int g_ramsize_triggerbar_addr = 2 * 1024; static int g_triggerbar_addr = 0; static int g_compression = COMPRESSION_NONE; /* Maybe unk specifies an "endpoint" or "register" of sorts. */ static int analyzer_write_status(libusb_device_handle *devh, unsigned char unk, unsigned char flags) { assert(unk <= 3); return gl_reg_write(devh, START_STATUS, unk << 6 | flags); } #if 0 static int __analyzer_set_freq(libusb_device_handle *devh, int freq, int scale) { int reg0 = 0, divisor = 0, reg2 = 0; switch (scale) { case FREQ_SCALE_MHZ: /* MHz */ if (freq >= 100 && freq <= 200) { reg0 = freq * 0.1; divisor = 1; reg2 = 0; break; } if (freq >= 50 && freq < 100) { reg0 = freq * 0.2; divisor = 2; reg2 = 0; break; } if (freq >= 10 && freq < 50) { if (freq == 25) { reg0 = 25; divisor = 5; reg2 = 1; break; } else { reg0 = freq * 0.5; divisor = 5; reg2 = 1; break; } } if (freq >= 2 && freq < 10) { divisor = 5; reg0 = freq * 2; reg2 = 2; break; } if (freq == 1) { divisor = 5; reg2 = 16; reg0 = 5; break; } divisor = 5; reg0 = 5; reg2 = 64; break; case FREQ_SCALE_HZ: /* Hz */ if (freq >= 500 && freq < 1000) { reg0 = freq * 0.01; divisor = 10; reg2 = 64; break; } if (freq >= 300 && freq < 500) { reg0 = freq * 0.005 * 8; divisor = 5; reg2 = 67; break; } if (freq >= 100 && freq < 300) { reg0 = freq * 0.005 * 16; divisor = 5; reg2 = 68; break; } divisor = 5; reg0 = 5; reg2 = 64; break; case FREQ_SCALE_KHZ: /* kHz */ if (freq >= 500 && freq < 1000) { reg0 = freq * 0.01; divisor = 5; reg2 = 17; break; } if (freq >= 100 && freq < 500) { reg0 = freq * 0.05; divisor = 5; reg2 = 32; break; } if (freq >= 50 && freq < 100) { reg0 = freq * 0.1; divisor = 5; reg2 = 33; break; } if (freq >= 10 && freq < 50) { if (freq == 25) { reg0 = 25; divisor = 5; reg2 = 49; break; } reg0 = freq * 0.5; divisor = 5; reg2 = 48; break; } if (freq >= 2 && freq < 10) { divisor = 5; reg0 = freq * 2; reg2 = 50; break; } divisor = 5; reg0 = 5; reg2 = 64; break; default: divisor = 5; reg0 = 5; reg2 = 64; break; } sr_dbg("Setting samplerate regs (freq=%d, scale=%d): " "reg0: %d, reg1: %d, reg2: %d, reg3: %d.", freq, scale, divisor, reg0, 0x02, reg2); if (gl_reg_write(devh, FREQUENCY_REG0, divisor) < 0) return -1; /* Divisor maybe? */ if (gl_reg_write(devh, FREQUENCY_REG1, reg0) < 0) return -1; /* 10 / 0.2 */ if (gl_reg_write(devh, FREQUENCY_REG2, 0x02) < 0) return -1; /* Always 2 */ if (gl_reg_write(devh, FREQUENCY_REG4, reg2) < 0) return -1; return 0; } #endif /* * It seems that ... * FREQUENCT_REG0 - division factor (?) * FREQUENCT_REG1 - multiplication factor (?) * FREQUENCT_REG4 - clock selection (?) * * clock selection * 0 10MHz 16 1MHz 32 100kHz 48 10kHz 64 1kHz * 1 5MHz 17 500kHz 33 50kHz 49 5kHz 65 500Hz * 2 2.5MHz . . 50 2.5kHz 66 250Hz * . . . . 67 125Hz * . . . . 68 62.5Hz */ static int __analyzer_set_freq(libusb_device_handle *devh, int freq, int scale) { struct freq_factor { int freq; int scale; int sel; int div; int mul; }; static const struct freq_factor f[] = { { 200, FREQ_SCALE_MHZ, 0, 1, 20 }, { 150, FREQ_SCALE_MHZ, 0, 1, 15 }, { 100, FREQ_SCALE_MHZ, 0, 1, 10 }, { 80, FREQ_SCALE_MHZ, 0, 2, 16 }, { 50, FREQ_SCALE_MHZ, 0, 2, 10 }, { 25, FREQ_SCALE_MHZ, 1, 5, 25 }, { 10, FREQ_SCALE_MHZ, 1, 5, 10 }, { 1, FREQ_SCALE_MHZ, 16, 5, 5 }, { 800, FREQ_SCALE_KHZ, 17, 5, 8 }, { 400, FREQ_SCALE_KHZ, 32, 5, 20 }, { 200, FREQ_SCALE_KHZ, 32, 5, 10 }, { 100, FREQ_SCALE_KHZ, 32, 5, 5 }, { 50, FREQ_SCALE_KHZ, 33, 5, 5 }, { 25, FREQ_SCALE_KHZ, 49, 5, 25 }, { 5, FREQ_SCALE_KHZ, 50, 5, 10 }, { 1, FREQ_SCALE_KHZ, 64, 5, 5 }, { 500, FREQ_SCALE_HZ, 64, 10, 5 }, { 100, FREQ_SCALE_HZ, 68, 5, 8 }, { 0, 0, 0, 0, 0 } }; int i; for (i = 0; f[i].freq; i++) { if (scale == f[i].scale && freq == f[i].freq) break; } if (!f[i].freq) return -1; sr_dbg("Setting samplerate regs (freq=%d, scale=%d): " "reg0: %d, reg1: %d, reg2: %d, reg3: %d.", freq, scale, f[i].div, f[i].mul, 0x02, f[i].sel); if (gl_reg_write(devh, FREQUENCY_REG0, f[i].div) < 0) return -1; if (gl_reg_write(devh, FREQUENCY_REG1, f[i].mul) < 0) return -1; if (gl_reg_write(devh, FREQUENCY_REG2, 0x02) < 0) return -1; if (gl_reg_write(devh, FREQUENCY_REG4, f[i].sel) < 0) return -1; return 0; } static void __analyzer_set_ramsize_trigger_address(libusb_device_handle *devh, unsigned int address) { gl_reg_write(devh, RAMSIZE_TRIGGERBAR_ADDRESS0, (address >> 0) & 0xFF); gl_reg_write(devh, RAMSIZE_TRIGGERBAR_ADDRESS1, (address >> 8) & 0xFF); gl_reg_write(devh, RAMSIZE_TRIGGERBAR_ADDRESS2, (address >> 16) & 0xFF); } static void __analyzer_set_triggerbar_address(libusb_device_handle *devh, unsigned int address) { gl_reg_write(devh, TRIGGERBAR_ADDRESS0, (address >> 0) & 0xFF); gl_reg_write(devh, TRIGGERBAR_ADDRESS1, (address >> 8) & 0xFF); gl_reg_write(devh, TRIGGERBAR_ADDRESS2, (address >> 16) & 0xFF); } static void __analyzer_set_compression(libusb_device_handle *devh, unsigned int type) { gl_reg_write(devh, COMPRESSION_TYPE0, (type >> 0) & 0xFF); gl_reg_write(devh, COMPRESSION_TYPE1, (type >> 8) & 0xFF); } static void __analyzer_set_trigger_count(libusb_device_handle *devh, unsigned int count) { gl_reg_write(devh, TRIGGER_COUNT0, (count >> 0) & 0xFF); gl_reg_write(devh, TRIGGER_COUNT1, (count >> 8) & 0xFF); } static void analyzer_write_enable_insert_data(libusb_device_handle *devh) { gl_reg_write(devh, ENABLE_INSERT_DATA0, 0x12); gl_reg_write(devh, ENABLE_INSERT_DATA1, 0x34); gl_reg_write(devh, ENABLE_INSERT_DATA2, 0x56); gl_reg_write(devh, ENABLE_INSERT_DATA3, 0x78); } static void analyzer_set_filter(libusb_device_handle *devh) { int i; gl_reg_write(devh, FILTER_ENABLE, g_filter_enable); for (i = 0; i < 8; i++) gl_reg_write(devh, FILTER_STATUS + i, g_filter_status[i]); } SR_PRIV void analyzer_reset(libusb_device_handle *devh) { analyzer_write_status(devh, 3, STATUS_FLAG_NONE); // reset device analyzer_write_status(devh, 3, STATUS_FLAG_RESET); // reset device } SR_PRIV void analyzer_initialize(libusb_device_handle *devh) { analyzer_write_status(devh, 1, STATUS_FLAG_NONE); analyzer_write_status(devh, 1, STATUS_FLAG_INIT); analyzer_write_status(devh, 1, STATUS_FLAG_NONE); } SR_PRIV void analyzer_wait(libusb_device_handle *devh, int set, int unset) { int status; while (1) { status = gl_reg_read(devh, DEV_STATUS); if ((!set || (status & set)) && ((status & unset) == 0)) return; } } SR_PRIV void analyzer_read_start(libusb_device_handle *devh) { int i; analyzer_write_status(devh, 3, STATUS_FLAG_20 | STATUS_FLAG_READ); for (i = 0; i < 8; i++) (void)gl_reg_read(devh, READ_RAM_STATUS); } SR_PRIV int analyzer_read_data(libusb_device_handle *devh, void *buffer, unsigned int size) { return gl_read_bulk(devh, buffer, size); } SR_PRIV void analyzer_read_stop(libusb_device_handle *devh) { analyzer_write_status(devh, 3, STATUS_FLAG_20); analyzer_write_status(devh, 3, STATUS_FLAG_NONE); } SR_PRIV void analyzer_start(libusb_device_handle *devh) { analyzer_write_status(devh, 1, STATUS_FLAG_NONE); analyzer_write_status(devh, 1, STATUS_FLAG_INIT); analyzer_write_status(devh, 1, STATUS_FLAG_NONE); analyzer_write_status(devh, 1, STATUS_FLAG_GO); } SR_PRIV void analyzer_configure(libusb_device_handle *devh) { int i; /* Write_Start_Status */ analyzer_write_status(devh, 1, STATUS_FLAG_RESET); analyzer_write_status(devh, 1, STATUS_FLAG_NONE); /* Start_Config_Outside_Device ? */ analyzer_write_status(devh, 1, STATUS_FLAG_INIT); analyzer_write_status(devh, 1, STATUS_FLAG_NONE); /* SetData_To_Frequence_Reg */ __analyzer_set_freq(devh, g_freq_value, g_freq_scale); /* SetMemory_Length */ gl_reg_write(devh, MEMORY_LENGTH, g_memory_size); /* Sele_Inside_Outside_Clock */ gl_reg_write(devh, CLOCK_SOURCE, 0x03); /* Set_Trigger_Status */ for (i = 0; i < 9; i++) gl_reg_write(devh, TRIGGER_STATUS0 + i, g_trigger_status[i]); __analyzer_set_trigger_count(devh, g_trigger_count); /* Set_Trigger_Level */ gl_reg_write(devh, TRIGGER_LEVEL0, 0x31); gl_reg_write(devh, TRIGGER_LEVEL1, 0x31); gl_reg_write(devh, TRIGGER_LEVEL2, 0x31); gl_reg_write(devh, TRIGGER_LEVEL3, 0x31); /* Size of actual memory >> 2 */ __analyzer_set_ramsize_trigger_address(devh, g_ramsize_triggerbar_addr); __analyzer_set_triggerbar_address(devh, g_triggerbar_addr); /* Set_Dont_Care_TriggerBar */ if (g_triggerbar_addr) gl_reg_write(devh, DONT_CARE_TRIGGERBAR, 0x00); else gl_reg_write(devh, DONT_CARE_TRIGGERBAR, 0x01); /* Enable_Status */ analyzer_set_filter(devh); /* Set_Enable_Delay_Time */ gl_reg_write(devh, 0x7a, 0x00); gl_reg_write(devh, 0x7b, 0x00); analyzer_write_enable_insert_data(devh); __analyzer_set_compression(devh, g_compression); } SR_PRIV void analyzer_add_trigger(int channel, int type) { switch (type) { case TRIGGER_HIGH: g_trigger_status[channel / 4] |= 1 << (channel % 4 * 2); break; case TRIGGER_LOW: g_trigger_status[channel / 4] |= 2 << (channel % 4 * 2); break; #if 0 case TRIGGER_POSEDGE: g_trigger_status[8] = 0x40 | channel; break; case TRIGGER_NEGEDGE: g_trigger_status[8] = 0x80 | channel; break; case TRIGGER_ANYEDGE: g_trigger_status[8] = 0xc0 | channel; break; #endif default: break; } } SR_PRIV void analyzer_add_filter(int channel, int type) { int i; if (type != FILTER_HIGH && type != FILTER_LOW) return; if ((channel & 0xf) >= 8) return; if (channel & CHANNEL_A) i = 0; else if (channel & CHANNEL_B) i = 2; else if (channel & CHANNEL_C) i = 4; else if (channel & CHANNEL_D) i = 6; else return; if ((channel & 0xf) >= 4) { i++; channel -= 4; } g_filter_status[i] |= 1 << ((2 * channel) + (type == FILTER_LOW ? 1 : 0)); g_filter_enable = 1; } SR_PRIV void analyzer_set_trigger_count(int count) { g_trigger_count = count; } SR_PRIV void analyzer_set_freq(int freq, int scale) { g_freq_value = freq; g_freq_scale = scale; } SR_PRIV void analyzer_set_memory_size(unsigned int size) { g_memory_size = size; } SR_PRIV void analyzer_set_ramsize_trigger_address(unsigned int address) { g_ramsize_triggerbar_addr = address; } SR_PRIV void analyzer_set_triggerbar_address(unsigned int address) { g_triggerbar_addr = address; } SR_PRIV unsigned int analyzer_read_status(libusb_device_handle *devh) { return gl_reg_read(devh, DEV_STATUS); } SR_PRIV unsigned int analyzer_read_id(libusb_device_handle *devh) { return gl_reg_read(devh, DEV_ID1) << 8 | gl_reg_read(devh, DEV_ID0); } SR_PRIV unsigned int analyzer_get_stop_address(libusb_device_handle *devh) { return gl_reg_read(devh, STOP_ADDRESS2) << 16 | gl_reg_read(devh, STOP_ADDRESS1) << 8 | gl_reg_read(devh, STOP_ADDRESS0); } SR_PRIV unsigned int analyzer_get_now_address(libusb_device_handle *devh) { return gl_reg_read(devh, NOW_ADDRESS2) << 16 | gl_reg_read(devh, NOW_ADDRESS1) << 8 | gl_reg_read(devh, NOW_ADDRESS0); } SR_PRIV unsigned int analyzer_get_trigger_address(libusb_device_handle *devh) { return gl_reg_read(devh, TRIGGER_ADDRESS2) << 16 | gl_reg_read(devh, TRIGGER_ADDRESS1) << 8 | gl_reg_read(devh, TRIGGER_ADDRESS0); } SR_PRIV void analyzer_set_compression(unsigned int type) { g_compression = type; } SR_PRIV void analyzer_wait_button(libusb_device_handle *devh) { analyzer_wait(devh, STATUS_BUTTON_PRESSED, 0); } SR_PRIV void analyzer_wait_data(libusb_device_handle *devh) { analyzer_wait(devh, 0, STATUS_BUSY); } SR_PRIV int analyzer_decompress(void *input, unsigned int input_len, void *output, unsigned int output_len) { unsigned char *in = input; unsigned char *out = output; unsigned int A, B, C, count; unsigned int written = 0; while (input_len > 0) { A = *in++; B = *in++; C = *in++; count = (*in++) + 1; if (count > output_len) count = output_len; output_len -= count; written += count; while (count--) { *out++ = A; *out++ = B; *out++ = C; *out++ = 0; /* Channel D */ } input_len -= 4; if (output_len == 0) break; } return written; }