/* * This file is part of the sigrok project. * * Copyright (C) 2010 Håvard Espeland , * Copyright (C) 2010 Martin Stensgård * Copyright (C) 2010 Carl Henrik Lunde * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef ASIX_SIGMA_H #define ASIX_SIGMA_H enum sigma_write_register { WRITE_CLOCK_SELECT = 0, WRITE_TRIGGER_SELECT0 = 1, WRITE_TRIGGER_SELECT1 = 2, WRITE_MODE = 3, WRITE_MEMROW = 4, WRITE_POST_TRIGGER = 5, WRITE_TRIGGER_OPTION = 6, WRITE_PIN_VIEW = 7, WRITE_TEST = 15, }; enum sigma_read_register { READ_ID = 0, READ_TRIGGER_POS_LOW = 1, READ_TRIGGER_POS_HIGH = 2, READ_TRIGGER_POS_UP = 3, READ_STOP_POS_LOW = 4, READ_STOP_POS_HIGH = 5, READ_STOP_POS_UP = 6, READ_MODE = 7, READ_PIN_CHANGE_LOW = 8, READ_PIN_CHANGE_HIGH = 9, READ_BLOCK_LAST_TS_LOW = 10, READ_BLOCK_LAST_TS_HIGH = 11, READ_PIN_VIEW = 12, READ_TEST = 15, }; #define REG_ADDR_LOW (0 << 4) #define REG_ADDR_HIGH (1 << 4) #define REG_DATA_LOW (2 << 4) #define REG_DATA_HIGH_WRITE (3 << 4) #define REG_READ_ADDR (4 << 4) #define REG_DRAM_WAIT_ACK (5 << 4) /* Bit (1 << 4) can be low or high (double buffer / cache) */ #define REG_DRAM_BLOCK (6 << 4) #define REG_DRAM_BLOCK_BEGIN (8 << 4) #define REG_DRAM_BLOCK_DATA (10 << 4) #define LEDSEL0 6 #define LEDSEL1 7 #define NEXT_REG 1 #define EVENTS_PER_CLUSTER 7 #define CHUNK_SIZE 1024 struct clockselect_50 { uint8_t async; uint8_t fraction; uint16_t disabled_probes; }; /* The effect of all these are still a bit unclear. */ struct triggerinout { uint8_t trgout_resistor_enable : 1; uint8_t trgout_resistor_pullup : 1; uint8_t reserved1 : 1; uint8_t trgout_bytrigger : 1; uint8_t trgout_byevent : 1; uint8_t trgout_bytriggerin : 1; uint8_t reserved2 : 2; /* Should be set same as the first two */ uint8_t trgout_resistor_enable2 : 1; uint8_t trgout_resistor_pullup2 : 1; uint8_t reserved3 : 1; uint8_t trgout_long : 1; uint8_t trgout_pin : 1; /* Use 1k resistor. Pullup? */ uint8_t trgin_negate : 1; uint8_t trgout_enable : 1; uint8_t trgin_enable : 1; }; struct triggerlut { /* The actual LUTs. */ uint16_t m0d[4], m1d[4], m2d[4]; uint16_t m3, m3s, m4; /* Paramters should be sent as a single register write. */ struct { uint8_t selc : 2; uint8_t selpresc : 6; uint8_t selinc : 2; uint8_t selres : 2; uint8_t sela : 2; uint8_t selb : 2; uint16_t cmpb; uint16_t cmpa; } params; }; /* Trigger configuration */ struct sigma_trigger { /* Only two probes can be used in mask. */ uint16_t risingmask; uint16_t fallingmask; /* Simple trigger support (<= 50 MHz). */ uint16_t simplemask; uint16_t simplevalue; /* TODO: Advanced trigger support (boolean expressions). */ }; /* Events for trigger operation. */ enum triggerop { OP_LEVEL = 1, OP_NOT, OP_RISE, OP_FALL, OP_RISEFALL, OP_NOTRISE, OP_NOTFALL, OP_NOTRISEFALL, }; /* Logical functions for trigger operation. */ enum triggerfunc { FUNC_AND = 1, FUNC_NAND, FUNC_OR, FUNC_NOR, FUNC_XOR, FUNC_NXOR, }; #endif