/* * This file is part of the libsigrok project. * * Copyright (C) 2010 Sven Peter * Copyright (C) 2010 Haxx Enterprises * All rights reserved. * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef LIBSIGROK_HARDWARE_ZEROPLUS_LOGIC_CUBE_ANALYZER_H #define LIBSIGROK_HARDWARE_ZEROPLUS_LOGIC_CUBE_ANALYZER_H #include #include "libsigrok.h" #define STATUS_FLAG_NONE 0x00 #define STATUS_FLAG_RESET 0x01 #define STATUS_FLAG_INIT 0x02 #define STATUS_FLAG_GO 0x04 #define STATUS_FLAG_PAUSE 0x08 #define STATUS_FLAG_READ 0x10 #define STATUS_FLAG_20 0x20 /* In bytes */ #define MEMORY_SIZE_8K 0x00 #define MEMORY_SIZE_64K 0x01 #define MEMORY_SIZE_128K 0x02 #define MEMORY_SIZE_256K 0x03 #define MEMORY_SIZE_512K 0x04 #define MEMORY_SIZE_1M 0x05 #define MEMORY_SIZE_2M 0x06 #define MEMORY_SIZE_4M 0x07 #define MEMORY_SIZE_8M 0x08 #define STATUS_BUSY 0x01 /* WTF / ??? */ #define STATUS_READY 0x02 #define STATUS_BUTTON_PRESSED 0x04 #define CHANNEL_A 0x1000 #define CHANNEL_B 0x2000 #define CHANNEL_C 0x3000 #define CHANNEL_D 0x4000 #define FREQ_SCALE_HZ 0 #define FREQ_SCALE_KHZ 1 #define FREQ_SCALE_MHZ 2 #define FILTER_HIGH 0 #define FILTER_LOW 1 #define COMPRESSION_NONE 0x0001 #define COMPRESSION_ENABLE 0x8001 #define COMPRESSION_DOUBLE 0x8002 SR_PRIV void analyzer_set_freq(int freq, int scale); SR_PRIV void analyzer_set_ramsize_trigger_address(unsigned int address); SR_PRIV void analyzer_set_triggerbar_address(unsigned int address); SR_PRIV unsigned int analyzer_get_ramsize_trigger_address(void ); SR_PRIV unsigned int analyzer_get_triggerbar_address(void); SR_PRIV void analyzer_set_compression(unsigned int type); SR_PRIV void analyzer_set_memory_size(unsigned int size); SR_PRIV int analyzer_add_triggers(const struct sr_dev_inst *sdi); SR_PRIV void analyzer_set_trigger_count(int count); SR_PRIV void analyzer_add_filter(int channel, int type); SR_PRIV void analyzer_set_voltage_threshold(int thresh); SR_PRIV unsigned int analyzer_read_status(libusb_device_handle *devh); SR_PRIV unsigned int analyzer_read_id(libusb_device_handle *devh); SR_PRIV unsigned int analyzer_get_stop_address(libusb_device_handle *devh); SR_PRIV unsigned int analyzer_get_now_address(libusb_device_handle *devh); SR_PRIV unsigned int analyzer_get_trigger_address(libusb_device_handle *devh); SR_PRIV int analyzer_decompress(void *input, unsigned int input_len, void *output, unsigned int output_len); SR_PRIV void analyzer_reset(libusb_device_handle *devh); SR_PRIV void analyzer_initialize(libusb_device_handle *devh); SR_PRIV void analyzer_wait(libusb_device_handle *devh, int set, int unset); SR_PRIV void analyzer_read_start(libusb_device_handle *devh); SR_PRIV int analyzer_read_data(libusb_device_handle *devh, void *buffer, unsigned int size); SR_PRIV void analyzer_read_stop(libusb_device_handle *devh); SR_PRIV void analyzer_start(libusb_device_handle *devh); SR_PRIV void analyzer_configure(libusb_device_handle *devh); SR_PRIV void analyzer_wait_button(libusb_device_handle *devh); SR_PRIV void analyzer_wait_data(libusb_device_handle *devh); #endif