/* * This file is part of the libsigrok project. * * Copyright (C) 2020 Florian Schmidt * Copyright (C) 2013 Marcus Comstedt * Copyright (C) 2013 Bert Vermeulen * Copyright (C) 2012 Joel Holdsworth * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H #define LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H #include #include #include #include "libsigrok-internal.h" #define LOG_PREFIX "kingst-la2016" #define LA2016_VID 0x77a1 #define LA2016_PID 0x01a2 #define USB_INTERFACE 0 #define USB_CONFIGURATION 1 #define LA2016_BULK_MAX 8388608 #define MAX_RENUM_DELAY_MS 3000 #define DEFAULT_TIMEOUT_MS 200 #define LA2016_THR_VOLTAGE_MIN 0.40 #define LA2016_THR_VOLTAGE_MAX 4.00 #define LA2016_NUM_SAMPLES_MIN 256 #define LA2016_NUM_SAMPLES_MAX (10UL * 1000 * 1000 * 1000) typedef struct pwm_setting_dev { uint32_t period; uint32_t duty; } pwm_setting_dev_t; typedef struct trigger_cfg { uint32_t channels; uint32_t enabled; uint32_t level; uint32_t high_or_falling; } trigger_cfg_t; typedef struct capture_info { uint32_t n_rep_packets; uint32_t n_rep_packets_before_trigger; uint32_t write_pos; } capture_info_t; #define NUM_PACKETS_IN_CHUNK 5 #define TRANSFER_PACKET_LENGTH 16 typedef struct pwm_setting { uint8_t enabled; float freq; float duty; } pwm_setting_t; struct dev_context { struct sr_context *ctx; int64_t fw_updated; pwm_setting_t pwm_setting[2]; unsigned int threshold_voltage_idx; float threshold_voltage; uint64_t cur_samplerate; uint64_t limit_samples; uint64_t capture_ratio; uint16_t cur_channels; int num_channels; uint32_t bitstream_size; /* derived stuff */ uint64_t pre_trigger_size; /* state after sampling */ int had_triggers_configured; int have_trigger; int transfer_finished; capture_info_t info; unsigned int n_transfer_packets_to_read; /* each with 5 acq packets */ unsigned int n_bytes_to_read; unsigned int n_reps_until_trigger; unsigned int reading_behind_trigger; uint64_t total_samples; uint32_t read_pos; unsigned int convbuffer_size; uint8_t *convbuffer; struct libusb_transfer *transfer; }; SR_PRIV int la2016_upload_firmware(struct sr_context *sr_ctx, libusb_device *dev, uint16_t product_id); SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi); SR_PRIV int la2016_start_acquisition(const struct sr_dev_inst *sdi); SR_PRIV int la2016_stop_acquisition(const struct sr_dev_inst *sdi); SR_PRIV int la2016_abort_acquisition(const struct sr_dev_inst *sdi); SR_PRIV int la2016_has_triggered(const struct sr_dev_inst *sdi); SR_PRIV int la2016_start_retrieval(const struct sr_dev_inst *sdi, libusb_transfer_cb_fn cb); SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi); SR_PRIV int la2016_deinit_device(const struct sr_dev_inst *sdi); #endif