/* * This file is part of the libsigrok project. * * Copyright (C) 2013 Marc Schink * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H #define LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H #include #include #include #include #include "libsigrok.h" #include "libsigrok-internal.h" #define LOG_PREFIX "ikalogic-scanalogic2" #define VENDOR_NAME "IKALOGIC" #define MODEL_NAME "Scanalogic-2" #define USB_VID_PID "20a0.4123" #define USB_INTERFACE 0 #define USB_TIMEOUT 5000 #define USB_REQUEST_TYPE_IN (LIBUSB_REQUEST_TYPE_CLASS | \ LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_IN) #define USB_REQUEST_TYPE_OUT (LIBUSB_REQUEST_TYPE_CLASS | \ LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_OUT) #define USB_HID_GET_REPORT 0x01 #define USB_HID_SET_REPORT 0x09 #define USB_HID_REPORT_TYPE_FEATURE 0x300 #define NUM_SAMPLERATES 11 #define NUM_CHANNELS 4 #define TRIGGER_TYPES "rfc" /* * Number of sample bytes and samples the device can acquire. Note that the * vendor software can acquire 32736 sample bytes only but the device is capable * to acquire up to 32766 sample bytes. */ #define MAX_DEV_SAMPLE_BYTES 32766 #define MAX_DEV_SAMPLES (MAX_INT_SAMPLE_BYTES * 8) /* Number of sample bytes and samples the driver can acquire. */ #define MAX_SAMPLE_BYTES (MAX_DEV_SAMPLE_BYTES - 1) #define MAX_SAMPLES (MAX_SAMPLE_BYTES * 8) /* Maximum time that the trigger can be delayed in milliseconds. */ #define MAX_AFTER_TRIGGER_DELAY 65000 #define PACKET_LENGTH 128 /* Number of sample bytes per packet where a sample byte contains 8 samples. */ #define PACKET_NUM_SAMPLE_BYTES 124 /* Number of samples per packet. */ #define PACKET_NUM_SAMPLES (PACKET_NUM_SAMPLE_BYTES * 8) #define DEFAULT_SAMPLERATE SR_KHZ(1.25) /* * Time interval between the last status of available data received and the * moment when the next status request will be sent in microseconds. */ #define WAIT_DATA_READY_INTERVAL 1500000 #define CMD_SAMPLE 0x01 #define CMD_RESET 0x02 #define CMD_IDLE 0x07 #define CMD_INFO 0x0a #define TRIGGER_CHANNEL_ALL 0x00 #define TRIGGER_CHANNEL_0 0x01 #define TRIGGER_CHANNEL_1 0x02 #define TRIGGER_CHANNEL_2 0x03 #define TRIGGER_TYPE_NEGEDGE 0x00 #define TRIGGER_TYPE_POSEDGE 0x01 #define TRIGGER_TYPE_ANYEDGE 0x02 #define TRIGGER_TYPE_NONE 0x03 #define STATUS_DATA_READY 0x60 #define STATUS_WAITING_FOR_TRIGGER 0x61 #define STATUS_SAMPLING 0x62 #define STATUS_DEVICE_READY 0x63 struct device_info { /* Serial number of the device. */ uint32_t serial; /* Major version of the firmware. */ uint8_t fw_ver_major; /* Minor version of the firmware. */ uint8_t fw_ver_minor; }; enum { STATE_IDLE = 0, STATE_SAMPLE, STATE_WAIT_DATA_READY, STATE_RECEIVE_DATA, STATE_RESET_AND_IDLE, STATE_WAIT_DEVICE_READY }; /** Private, per-device-instance driver context. */ struct dev_context { /* Current selected samplerate. */ uint64_t samplerate; /* Device specific identifier for the current samplerate. */ uint8_t samplerate_id; /* Current sampling limit. */ uint64_t limit_samples; /* Calculated number of pre-trigger samples. */ uint64_t pre_trigger_samples; /* Number of pre- and post-trigger sample bytes to acquire. */ uint16_t pre_trigger_bytes; uint16_t post_trigger_bytes; /* Device specific settings for the trigger. */ uint8_t trigger_channel; uint8_t trigger_type; unsigned int capture_ratio; /* Time that the trigger will be delayed in milliseconds. */ uint16_t after_trigger_delay; void *cb_data; /* Array to provide an index based access to all channels. */ const struct sr_channel *channels[NUM_CHANNELS]; struct libusb_transfer *xfer_in, *xfer_out; /* * Buffer to store setup and payload data for incoming and outgoing * transfers. */ uint8_t xfer_buf_in[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH]; uint8_t xfer_buf_out[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH]; /* Pointers to the payload of incoming and outgoing transfers. */ uint8_t *xfer_data_in, *xfer_data_out; /* Current state of the state machine */ unsigned int state; /* Next state of the state machine. */ unsigned int next_state; /* * Locking variable to ensure that no status about available data will * be requested until the last status was received. */ gboolean wait_data_ready_locked; /* * Time when the last response about the status of available data was * received. */ int64_t wait_data_ready_time; /* * Indicates that stopping of the acquisition is currently in progress. */ gboolean stopping_in_progress; /* * Buffer which contains the samples received from the device for each * channel except the last one. The samples of the last channel will be * processed directly after they will be received. */ uint8_t sample_buffer[NUM_CHANNELS - 1][MAX_DEV_SAMPLE_BYTES]; /* Expected number of sample packets for each channel. */ uint16_t num_sample_packets; /* Number of samples already processed. */ uint64_t samples_processed; /* Sample packet number that is currently processed. */ uint16_t sample_packet; /* Channel number that is currently processed. */ uint8_t channel; /* Number of enabled channels. */ unsigned int num_enabled_channels; /* Array to provide a sequential access to all enabled channel indices. */ uint8_t channel_map[NUM_CHANNELS]; /* Indicates whether a transfer failed. */ gboolean transfer_error; }; SR_PRIV int ikalogic_scanalogic2_receive_data(int fd, int revents, void *cb_data); SR_PRIV void sl2_receive_transfer_in(struct libusb_transfer *transfer); SR_PRIV void sl2_receive_transfer_out(struct libusb_transfer *transfer); SR_PRIV int sl2_set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate); SR_PRIV int sl2_set_limit_samples(const struct sr_dev_inst *sdi, uint64_t limit_samples); SR_PRIV void sl2_configure_trigger(const struct sr_dev_inst *sdi); SR_PRIV int sl2_set_capture_ratio(const struct sr_dev_inst *sdi, uint64_t capture_ratio); SR_PRIV int sl2_set_after_trigger_delay(const struct sr_dev_inst *sdi, uint64_t after_trigger_delay); SR_PRIV void sl2_calculate_trigger_samples(const struct sr_dev_inst *sdi); SR_PRIV int sl2_get_device_info(struct sr_usb_dev_inst usb, struct device_info *dev_info); SR_PRIV int sl2_transfer_in(libusb_device_handle *dev_handle, uint8_t *data); SR_PRIV int sl2_transfer_out(libusb_device_handle *dev_handle, uint8_t *data); #endif