/*
 * This file is part of the libsigrok project.
 *
 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <config.h>
#include <glib.h>
#include <glib/gstdio.h>
#include "protocol.h"

#pragma pack(push, 1)

struct version_info {
	uint8_t major;
	uint8_t minor;
};

struct cmd_start_acquisition {
	uint8_t flags;
	uint8_t sample_delay_h;
	uint8_t sample_delay_l;
};

#pragma pack(pop)

#define USB_TIMEOUT 100

static int command_get_fw_version(libusb_device_handle *devhdl,
				  struct version_info *vi)
{
	int ret;

	ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
		LIBUSB_ENDPOINT_IN, CMD_GET_FW_VERSION, 0x0000, 0x0000,
		(unsigned char *)vi, sizeof(struct version_info), USB_TIMEOUT);

	if (ret < 0) {
		sr_err("Unable to get version info: %s.",
		       libusb_error_name(ret));
		return SR_ERR;
	}

	return SR_OK;
}

static int command_get_revid_version(struct sr_dev_inst *sdi, uint8_t *revid)
{
	struct sr_usb_dev_inst *usb = sdi->conn;
	libusb_device_handle *devhdl = usb->devhdl;
	int ret;

	ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
		LIBUSB_ENDPOINT_IN, CMD_GET_REVID_VERSION, 0x0000, 0x0000,
		revid, 1, USB_TIMEOUT);

	if (ret < 0) {
		sr_err("Unable to get REVID: %s.", libusb_error_name(ret));
		return SR_ERR;
	}

	return SR_OK;
}

static int command_start_acquisition(const struct sr_dev_inst *sdi)
{
	struct dev_context *devc;
	struct sr_usb_dev_inst *usb;
	uint64_t samplerate;
	struct cmd_start_acquisition cmd;
	int delay, ret;

	devc = sdi->priv;
	usb = sdi->conn;
	samplerate = devc->cur_samplerate;

	/* Compute the sample rate. */
	if (devc->sample_wide && samplerate > MAX_16BIT_SAMPLE_RATE) {
		sr_err("Unable to sample at %" PRIu64 "Hz "
		       "when collecting 16-bit samples.", samplerate);
		return SR_ERR;
	}

	delay = 0;
	cmd.flags = cmd.sample_delay_h = cmd.sample_delay_l = 0;
	if ((SR_MHZ(48) % samplerate) == 0) {
		cmd.flags = CMD_START_FLAGS_CLK_48MHZ;
		delay = SR_MHZ(48) / samplerate - 1;
		if (delay > MAX_SAMPLE_DELAY)
			delay = 0;
	}

	if (delay == 0 && (SR_MHZ(30) % samplerate) == 0) {
		cmd.flags = CMD_START_FLAGS_CLK_30MHZ;
		delay = SR_MHZ(30) / samplerate - 1;
	}

	sr_dbg("GPIF delay = %d, clocksource = %sMHz.", delay,
		(cmd.flags & CMD_START_FLAGS_CLK_48MHZ) ? "48" : "30");

	if (delay <= 0 || delay > MAX_SAMPLE_DELAY) {
		sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
		return SR_ERR;
	}

	cmd.sample_delay_h = (delay >> 8) & 0xff;
	cmd.sample_delay_l = delay & 0xff;

	/* Select the sampling width. */
	cmd.flags |= devc->sample_wide ? CMD_START_FLAGS_SAMPLE_16BIT :
		CMD_START_FLAGS_SAMPLE_8BIT;
	/* Enable CTL2 clock. */
	cmd.flags |= (g_slist_length(devc->enabled_analog_channels) > 0) ? CMD_START_FLAGS_CLK_CTL2 : 0;

	/* Send the control message. */
	ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
			LIBUSB_ENDPOINT_OUT, CMD_START, 0x0000, 0x0000,
			(unsigned char *)&cmd, sizeof(cmd), USB_TIMEOUT);
	if (ret < 0) {
		sr_err("Unable to send start command: %s.",
		       libusb_error_name(ret));
		return SR_ERR;
	}

	return SR_OK;
}

SR_PRIV int fx2lafw_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di)
{
	libusb_device **devlist;
	struct sr_usb_dev_inst *usb;
	struct libusb_device_descriptor des;
	struct dev_context *devc;
	struct drv_context *drvc;
	struct version_info vi;
	int ret, i, device_count;
	uint8_t revid;
	char connection_id[64];

	drvc = di->context;
	devc = sdi->priv;
	usb = sdi->conn;

	if (sdi->status == SR_ST_ACTIVE)
		/* Device is already in use. */
		return SR_ERR;

	device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
	if (device_count < 0) {
		sr_err("Failed to get device list: %s.",
		       libusb_error_name(device_count));
		return SR_ERR;
	}

	for (i = 0; i < device_count; i++) {
		libusb_get_device_descriptor(devlist[i], &des);

		if (des.idVendor != devc->profile->vid
		    || des.idProduct != devc->profile->pid)
			continue;

		if ((sdi->status == SR_ST_INITIALIZING) ||
				(sdi->status == SR_ST_INACTIVE)) {
			/*
			 * Check device by its physical USB bus/port address.
			 */
			usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
			if (strcmp(sdi->connection_id, connection_id))
				/* This is not the one. */
				continue;
		}

		if (!(ret = libusb_open(devlist[i], &usb->devhdl))) {
			if (usb->address == 0xff)
				/*
				 * First time we touch this device after FW
				 * upload, so we don't know the address yet.
				 */
				usb->address = libusb_get_device_address(devlist[i]);
		} else {
			sr_err("Failed to open device: %s.",
			       libusb_error_name(ret));
			break;
		}

		if (libusb_has_capability(LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER)) {
			if (libusb_kernel_driver_active(usb->devhdl, USB_INTERFACE) == 1) {
				if ((ret = libusb_detach_kernel_driver(usb->devhdl, USB_INTERFACE)) < 0) {
					sr_err("Failed to detach kernel driver: %s.",
						libusb_error_name(ret));
					return SR_ERR;
				}
			}
		}

		ret = command_get_fw_version(usb->devhdl, &vi);
		if (ret != SR_OK) {
			sr_err("Failed to get firmware version.");
			break;
		}

		ret = command_get_revid_version(sdi, &revid);
		if (ret != SR_OK) {
			sr_err("Failed to get REVID.");
			break;
		}

		/*
		 * Changes in major version mean incompatible/API changes, so
		 * bail out if we encounter an incompatible version.
		 * Different minor versions are OK, they should be compatible.
		 */
		if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) {
			sr_err("Expected firmware version %d.x, "
			       "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR,
			       vi.major, vi.minor);
			break;
		}

		sdi->status = SR_ST_ACTIVE;
		sr_info("Opened device on %d.%d (logical) / %s (physical), "
			"interface %d, firmware %d.%d.",
			usb->bus, usb->address, connection_id,
			USB_INTERFACE, vi.major, vi.minor);

		sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.",
			revid, (revid != 1) ? " (FX2)" : "A (FX2LP)");

		break;
	}
	libusb_free_device_list(devlist, 1);

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR;

	return SR_OK;
}

SR_PRIV struct dev_context *fx2lafw_dev_new(void)
{
	struct dev_context *devc;

	devc = g_malloc0(sizeof(struct dev_context));
	devc->profile = NULL;
	devc->fw_updated = 0;
	devc->cur_samplerate = 0;
	devc->limit_samples = 0;
	devc->capture_ratio = 0;
	devc->sample_wide = FALSE;
	devc->stl = NULL;

	return devc;
}

SR_PRIV void fx2lafw_abort_acquisition(struct dev_context *devc)
{
	int i;

	devc->acq_aborted = TRUE;

	for (i = devc->num_transfers - 1; i >= 0; i--) {
		if (devc->transfers[i])
			libusb_cancel_transfer(devc->transfers[i]);
	}
}

static void finish_acquisition(struct sr_dev_inst *sdi)
{
	struct dev_context *devc;

	devc = sdi->priv;

	std_session_send_df_end(sdi);

	usb_source_remove(sdi->session, devc->ctx);

	devc->num_transfers = 0;
	g_free(devc->transfers);

	/* Free the deinterlace buffers if we had them. */
	if (g_slist_length(devc->enabled_analog_channels) > 0) {
		g_free(devc->logic_buffer);
		g_free(devc->analog_buffer);
	}

	if (devc->stl) {
		soft_trigger_logic_free(devc->stl);
		devc->stl = NULL;
	}
}

static void free_transfer(struct libusb_transfer *transfer)
{
	struct sr_dev_inst *sdi;
	struct dev_context *devc;
	unsigned int i;

	sdi = transfer->user_data;
	devc = sdi->priv;

	g_free(transfer->buffer);
	transfer->buffer = NULL;
	libusb_free_transfer(transfer);

	for (i = 0; i < devc->num_transfers; i++) {
		if (devc->transfers[i] == transfer) {
			devc->transfers[i] = NULL;
			break;
		}
	}

	devc->submitted_transfers--;
	if (devc->submitted_transfers == 0)
		finish_acquisition(sdi);
}

static void resubmit_transfer(struct libusb_transfer *transfer)
{
	int ret;

	if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
		return;

	sr_err("%s: %s", __func__, libusb_error_name(ret));
	free_transfer(transfer);

}

static void mso_send_data_proc(struct sr_dev_inst *sdi,
	uint8_t *data, size_t length, size_t sample_width)
{
	size_t i;
	struct dev_context *devc;
	struct sr_datafeed_analog analog;
	struct sr_analog_encoding encoding;
	struct sr_analog_meaning meaning;
	struct sr_analog_spec spec;

	(void)sample_width;

	devc = sdi->priv;

	length /= 2;

	/* Send the logic */
	for (i = 0; i < length; i++) {
		devc->logic_buffer[i] = data[i * 2];
		/* Rescale to -10V - +10V from 0-255. */
		devc->analog_buffer[i] = (data[i * 2 + 1] - 128.0f) / 12.8f;
	};

	const struct sr_datafeed_logic logic = {
		.length = length,
		.unitsize = 1,
		.data = devc->logic_buffer
	};

	const struct sr_datafeed_packet logic_packet = {
		.type = SR_DF_LOGIC,
		.payload = &logic
	};

	sr_session_send(sdi, &logic_packet);

	sr_analog_init(&analog, &encoding, &meaning, &spec, 2);
	analog.meaning->channels = devc->enabled_analog_channels;
	analog.meaning->mq = SR_MQ_VOLTAGE;
	analog.meaning->unit = SR_UNIT_VOLT;
	analog.meaning->mqflags = 0 /* SR_MQFLAG_DC */;
	analog.num_samples = length;
	analog.data = devc->analog_buffer;

	const struct sr_datafeed_packet analog_packet = {
		.type = SR_DF_ANALOG,
		.payload = &analog
	};

	sr_session_send(sdi, &analog_packet);
}

static void la_send_data_proc(struct sr_dev_inst *sdi,
	uint8_t *data, size_t length, size_t sample_width)
{
	const struct sr_datafeed_logic logic = {
		.length = length,
		.unitsize = sample_width,
		.data = data
	};

	const struct sr_datafeed_packet packet = {
		.type = SR_DF_LOGIC,
		.payload = &logic
	};

	sr_session_send(sdi, &packet);
}

static void LIBUSB_CALL receive_transfer(struct libusb_transfer *transfer)
{
	struct sr_dev_inst *sdi;
	struct dev_context *devc;
	gboolean packet_has_error = FALSE;
	unsigned int num_samples;
	int trigger_offset, cur_sample_count, unitsize;
	int pre_trigger_samples;

	sdi = transfer->user_data;
	devc = sdi->priv;

	/*
	 * If acquisition has already ended, just free any queued up
	 * transfer that come in.
	 */
	if (devc->acq_aborted) {
		free_transfer(transfer);
		return;
	}

	sr_dbg("receive_transfer(): status %s received %d bytes.",
		libusb_error_name(transfer->status), transfer->actual_length);

	/* Save incoming transfer before reusing the transfer struct. */
	unitsize = devc->sample_wide ? 2 : 1;
	cur_sample_count = transfer->actual_length / unitsize;

	switch (transfer->status) {
	case LIBUSB_TRANSFER_NO_DEVICE:
		fx2lafw_abort_acquisition(devc);
		free_transfer(transfer);
		return;
	case LIBUSB_TRANSFER_COMPLETED:
	case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
		break;
	default:
		packet_has_error = TRUE;
		break;
	}

	if (transfer->actual_length == 0 || packet_has_error) {
		devc->empty_transfer_count++;
		if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
			/*
			 * The FX2 gave up. End the acquisition, the frontend
			 * will work out that the samplecount is short.
			 */
			fx2lafw_abort_acquisition(devc);
			free_transfer(transfer);
		} else {
			resubmit_transfer(transfer);
		}
		return;
	} else {
		devc->empty_transfer_count = 0;
	}
	if (devc->trigger_fired) {
		if (!devc->limit_samples || devc->sent_samples < devc->limit_samples) {
			/* Send the incoming transfer to the session bus. */
			if (devc->limit_samples && devc->sent_samples + cur_sample_count > devc->limit_samples)
				num_samples = devc->limit_samples - devc->sent_samples;
			else
				num_samples = cur_sample_count;

			devc->send_data_proc(sdi, (uint8_t *)transfer->buffer,
				num_samples * unitsize, unitsize);
			devc->sent_samples += num_samples;
		}
	} else {
		trigger_offset = soft_trigger_logic_check(devc->stl,
			transfer->buffer, transfer->actual_length, &pre_trigger_samples);
		if (trigger_offset > -1) {
			devc->sent_samples += pre_trigger_samples;
			num_samples = cur_sample_count - trigger_offset;
			if (devc->limit_samples &&
					num_samples > devc->limit_samples - devc->sent_samples)
				num_samples = devc->limit_samples - devc->sent_samples;

			devc->send_data_proc(sdi, (uint8_t *)transfer->buffer
					+ trigger_offset * unitsize,
					num_samples * unitsize, unitsize);
			devc->sent_samples += num_samples;

			devc->trigger_fired = TRUE;
		}
	}

	if (devc->limit_samples && devc->sent_samples >= devc->limit_samples) {
		fx2lafw_abort_acquisition(devc);
		free_transfer(transfer);
	} else
		resubmit_transfer(transfer);
}

static int configure_channels(const struct sr_dev_inst *sdi)
{
	struct dev_context *devc;
	const GSList *l;
	int p;
	struct sr_channel *ch;
	uint32_t channel_mask = 0, num_analog = 0;

	devc = sdi->priv;

	g_slist_free(devc->enabled_analog_channels);
	devc->enabled_analog_channels = NULL;

	for (l = sdi->channels, p = 0; l; l = l->next, p++) {
		ch = l->data;
		if ((p <= NUM_CHANNELS) && (ch->type == SR_CHANNEL_ANALOG)
				&& (ch->enabled)) {
			num_analog++;
			devc->enabled_analog_channels =
			    g_slist_append(devc->enabled_analog_channels, ch);
		} else {
			channel_mask |= ch->enabled << p;
		}
	}

	/*
	 * Use wide sampling if either any of the LA channels 8..15 is enabled,
	 * and/or at least one analog channel is enabled.
	 */
	devc->sample_wide = channel_mask > 0xff || num_analog > 0;

	return SR_OK;
}

static unsigned int to_bytes_per_ms(unsigned int samplerate)
{
	return samplerate / 1000;
}

static size_t get_buffer_size(struct dev_context *devc)
{
	size_t s;

	/*
	 * The buffer should be large enough to hold 10ms of data and
	 * a multiple of 512.
	 */
	s = 10 * to_bytes_per_ms(devc->cur_samplerate);
	return (s + 511) & ~511;
}

static unsigned int get_number_of_transfers(struct dev_context *devc)
{
	unsigned int n;

	/* Total buffer size should be able to hold about 500ms of data. */
	n = (500 * to_bytes_per_ms(devc->cur_samplerate) /
		get_buffer_size(devc));

	if (n > NUM_SIMUL_TRANSFERS)
		return NUM_SIMUL_TRANSFERS;

	return n;
}

static unsigned int get_timeout(struct dev_context *devc)
{
	size_t total_size;
	unsigned int timeout;

	total_size = get_buffer_size(devc) *
			get_number_of_transfers(devc);
	timeout = total_size / to_bytes_per_ms(devc->cur_samplerate);
	return timeout + timeout / 4; /* Leave a headroom of 25% percent. */
}

static int receive_data(int fd, int revents, void *cb_data)
{
	struct timeval tv;
	struct drv_context *drvc;

	(void)fd;
	(void)revents;

	drvc = (struct drv_context *)cb_data;

	tv.tv_sec = tv.tv_usec = 0;
	libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);

	return TRUE;
}

static int start_transfers(const struct sr_dev_inst *sdi)
{
	struct dev_context *devc;
	struct sr_usb_dev_inst *usb;
	struct sr_trigger *trigger;
	struct libusb_transfer *transfer;
	unsigned int i, num_transfers;
	int timeout, ret;
	unsigned char *buf;
	size_t size;

	devc = sdi->priv;
	usb = sdi->conn;

	devc->sent_samples = 0;
	devc->acq_aborted = FALSE;
	devc->empty_transfer_count = 0;

	if ((trigger = sr_session_trigger_get(sdi->session))) {
		int pre_trigger_samples = 0;
		if (devc->limit_samples > 0)
			pre_trigger_samples = devc->capture_ratio * devc->limit_samples/100;
		devc->stl = soft_trigger_logic_new(sdi, trigger, pre_trigger_samples);
		if (!devc->stl)
			return SR_ERR_MALLOC;
		devc->trigger_fired = FALSE;
	} else
		devc->trigger_fired = TRUE;

	num_transfers = get_number_of_transfers(devc);

	size = get_buffer_size(devc);
	devc->submitted_transfers = 0;

	devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
	if (!devc->transfers) {
		sr_err("USB transfers malloc failed.");
		return SR_ERR_MALLOC;
	}

	timeout = get_timeout(devc);
	devc->num_transfers = num_transfers;
	for (i = 0; i < num_transfers; i++) {
		if (!(buf = g_try_malloc(size))) {
			sr_err("USB transfer buffer malloc failed.");
			return SR_ERR_MALLOC;
		}
		transfer = libusb_alloc_transfer(0);
		libusb_fill_bulk_transfer(transfer, usb->devhdl,
				2 | LIBUSB_ENDPOINT_IN, buf, size,
				receive_transfer, (void *)sdi, timeout);
		sr_info("submitting transfer: %d", i);
		if ((ret = libusb_submit_transfer(transfer)) != 0) {
			sr_err("Failed to submit transfer: %s.",
			       libusb_error_name(ret));
			libusb_free_transfer(transfer);
			g_free(buf);
			fx2lafw_abort_acquisition(devc);
			return SR_ERR;
		}
		devc->transfers[i] = transfer;
		devc->submitted_transfers++;
	}

	/*
	 * If this device has analog channels and at least one of them is
	 * enabled, use mso_send_data_proc() to properly handle the analog
	 * data. Otherwise use la_send_data_proc().
	 */
	if (g_slist_length(devc->enabled_analog_channels) > 0)
		devc->send_data_proc = mso_send_data_proc;
	else
		devc->send_data_proc = la_send_data_proc;

	std_session_send_df_header(sdi);

	return SR_OK;
}

SR_PRIV int fx2lafw_start_acquisition(const struct sr_dev_inst *sdi)
{
	struct sr_dev_driver *di;
	struct drv_context *drvc;
	struct dev_context *devc;
	int timeout, ret;
	size_t size;

	di = sdi->driver;
	drvc = di->context;
	devc = sdi->priv;

	devc->ctx = drvc->sr_ctx;
	devc->sent_samples = 0;
	devc->empty_transfer_count = 0;
	devc->acq_aborted = FALSE;

	if (configure_channels(sdi) != SR_OK) {
		sr_err("Failed to configure channels.");
		return SR_ERR;
	}

	timeout = get_timeout(devc);
	usb_source_add(sdi->session, devc->ctx, timeout, receive_data, drvc);

	size = get_buffer_size(devc);
	/* Prepare for analog sampling. */
	if (g_slist_length(devc->enabled_analog_channels) > 0) {
		/* We need a buffer half the size of a transfer. */
		devc->logic_buffer = g_try_malloc(size / 2);
		devc->analog_buffer = g_try_malloc(
			sizeof(float) * size / 2);
	}
	start_transfers(sdi);
	if ((ret = command_start_acquisition(sdi)) != SR_OK) {
		fx2lafw_abort_acquisition(devc);
		return ret;
	}

	return SR_OK;
}