-- Prosody XMPP Server Configuration -- -- Information on configuring Prosody can be found on our -- website at http://prosody.im/doc/configure -- -- Tip: You can check that the syntax of this file is correct -- when you have finished by running: prosodyctl check config -- If there are any errors, it will let you know what and where -- they are, otherwise it will keep quiet. -- -- Good luck, and happy Jabbering! ---------- Server-wide settings ---------- -- Settings in this section apply to the whole server and are the default settings -- for any virtual hosts -- This is a (by default, empty) list of accounts that are admins -- for the server. Note that you must create the accounts separately -- (see http://prosody.im/doc/creating_accounts for info) -- Example: admins = { "user1@example.com", "user2@example.net" } admins = { } daemonize = true cross_domain_bosh = true; component_ports = { 5347 } --component_interface = "192.168.0.10" -- Enable use of libevent for better performance under high load -- For more information see: http://prosody.im/doc/libevent --use_libevent = true -- This is the list of modules Prosody will load on startup. -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too. -- Documentation on modules can be found at: http://prosody.im/doc/modules modules_enabled = { -- Generally required "roster"; -- Allow users to have a roster. Recommended ;) "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in. "tls"; -- Add support for secure TLS on c2s/s2s connections "dialback"; -- s2s dialback support "disco"; -- Service discovery "posix"; -- POSIX functionality, sends server to background, enables syslog, etc. -- Not essential, but recommended "private"; -- Private XML storage (for room bookmarks, etc.) "vcard"; -- Allow users to set vCards -- These are commented by default as they have a performance impact --"privacy"; -- Support privacy lists "compression"; -- Stream compression (requires the lua-zlib package installed) -- Nice to have "version"; -- Replies to server version requests "uptime"; -- Report how long server has been running "time"; -- Let others know the time here on this server "ping"; -- Replies to XMPP pings with pongs "pep"; -- Enables users to publish their mood, activity, playing music and more "register"; -- Allow users to register on this server using a client and change passwords -- Admin interfaces "admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands --"admin_telnet"; -- Opens telnet console interface on localhost port 5582 -- HTTP modules "bosh"; -- Enable BOSH clients, aka "Jabber over HTTP" --"http_files"; -- Serve static files from a directory over HTTP -- Other specific functionality --"groups"; -- Shared roster support --"announce"; -- Send announcement to all online users --"welcome"; -- Welcome users who register accounts --"watchregistrations"; -- Alert admins of registrations --"motd"; -- Send a message to users when they log in --"legacyauth"; -- Legacy authentication. Only used by some old clients and bots. -- jitsi "smacks"; "carbons"; "mam"; "lastactivity"; "offline"; "pubsub"; "adhoc"; "websocket"; "http_altconnect"; } -- These modules are auto-loaded, but should you want -- to disable them then uncomment them here: modules_disabled = { -- "offline"; -- Store offline messages -- "c2s"; -- Handle client connections -- "s2s"; -- Handle server-to-server connections } -- Disable account creation by default, for security -- For more information see http://prosody.im/doc/creating_accounts allow_registration = false -- These are the SSL/TLS-related settings. If you don't want -- to use SSL/TLS, you may comment or remove this ssl = { key = "/etc/prosody/certs/localhost.key"; certificate = "/etc/prosody/certs/localhost.crt"; } -- Force clients to use encrypted connections? This option will -- prevent clients from authenticating unless they are using encryption. -- c2s_require_encryption = true -- Force certificate authentication for server-to-server connections? -- This provides ideal security, but requires servers you communicate -- with to support encryption AND present valid, trusted certificates. -- NOTE: Your version of LuaSec must support certificate verification! -- For more information see http://prosody.im/doc/s2s#security -- s2s_secure_auth = false -- Many servers don't support encryption or have invalid or self-signed -- certificates. You can list domains here that will not be required to -- authenticate using certificates. They will be authenticated using DNS. --s2s_insecure_domains = { "gmail.com" } -- Even if you leave s2s_secure_auth disabled, you can still require valid -- certificates for some domains by specifying a list here. --s2s_secure_domains = { "jabber.org" } -- Required for init scripts and prosodyctl pidfile = "/var/run/prosody/prosody.pid" -- Select the authentication backend to use. The 'internal' providers -- use Prosody's configured data storage to store the authentication data. -- To allow Prosody to offer secure authentication mechanisms to clients, the -- default provider stores passwords in plaintext. If you do not trust your -- server please see http://prosody.im/doc/modules/mod_auth_internal_hashed -- for information about using the hashed backend. -- authentication = "internal_plain" authentication = "internal_hashed" -- Select the storage backend to use. By default Prosody uses flat files -- in its configured data directory, but it also supports more backends -- through modules. An "sql" backend is included by default, but requires -- additional dependencies. See http://prosody.im/doc/storage for more info. --storage = "sql" -- Default is "internal" -- For the "sql" backend, you can uncomment *one* of the below to configure: --sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename. --sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" } --sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" } -- Logging configuration -- For advanced logging see http://prosody.im/doc/logging log = { info = "/var/log/prosody/prosody.log"; -- Change 'info' to 'debug' for verbose logging error = "/var/log/prosody/prosody.err"; "*syslog"; } ----------- Virtual hosts ----------- -- You need to add a VirtualHost entry for each domain you wish Prosody to serve. -- Settings under each VirtualHost entry apply *only* to that host. --VirtualHost "localhost" VirtualHost "jitsi.example.com" -- enabled = false -- Remove this line to enable this host authentication = "anonymous" -- Assign this host a certificate for TLS, otherwise it would use the one -- set in the global section (if any). -- Note that old-style SSL on port 5223 only supports one certificate, and will always -- use the global one. ssl = { key = "/var/lib/prosody/jitsi.example.com.key"; certificate = "/var/lib/prosody/jitsi.example.com.crt"; } c2s_require_encryption = false VirtualHost "auth.jitsi.example.com" ssl = { key = "/var/lib/prosody/auth.jitsi.example.com.key"; certificate = "/var/lib/prosody/auth.jitsi.example.com.crt"; } authentication = "internal_plain" ------ Components ------ -- You can specify components to add hosts that provide special services, -- like multi-user conferences, and transports. -- For more information on components, see http://prosody.im/doc/components ---Set up a MUC (multi-user chat) room server on conference.example.com: --Component "conference.example.com" "muc" -- Set up a SOCKS5 bytestream proxy for server-proxied file transfers: --Component "proxy.example.com" "proxy65" ---Set up an external component (default component port is 5347) -- -- External components allow adding various services, such as gateways/ -- transports to other networks like ICQ, MSN and Yahoo. For more info -- see: http://prosody.im/doc/components#adding_an_external_component -- --Component "gateway.example.com" -- component_secret = "password" Component "conference.jitsi.example.com" "muc" Component "jitsi-videobridge.jitsi.example.com" component_secret = "IfGaish6"