kicad/common/base_units.cpp

476 lines
13 KiB
C++
Raw Normal View History

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2012 CERN
* Copyright (C) 1992-2021 KiCad Developers, see AUTHORS.txt for contributors.
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
/**
* @author Wayne Stambaugh <stambaughw@gmail.com>
* @file base_units.cpp
* @brief Code to handle objects that require both schematic and board internal units.
* @note This file is an ugly hack to solve the problem of formatting the base units
* for either schematics or boards in objects that are include in both domains.
* At some point in the future. This code should be rolled back into the
* appropriate object and build with the correct internal unit formatting
* depending on the application.
*/
#include <base_units.h>
#include <string_utils.h>
#include <math/util.h> // for KiROUND
#include <macros.h>
#if defined( PCBNEW ) || defined( CVPCB ) || defined( EESCHEMA ) || defined( GERBVIEW ) || defined( PL_EDITOR )
#define IU_TO_MM( x ) ( x / IU_PER_MM )
#define IU_TO_IN( x ) ( x / IU_PER_MILS / 1000 )
#define IU_TO_MILS( x ) ( x / IU_PER_MILS )
#define MM_TO_IU( x ) ( x * IU_PER_MM )
#define IN_TO_IU( x ) ( x * IU_PER_MILS * 1000 )
#define MILS_TO_IU( x ) ( x * IU_PER_MILS )
#else
#error "Cannot resolve internal units due to no definition of EESCHEMA, CVPCB or PCBNEW."
#endif
int Mm2mils( double x )
{
return KiROUND( x * 1000. / 25.4 );
}
int Mils2mm( double x )
{
return KiROUND( x * 25.4 / 1000. );
}
double To_User_Unit( EDA_UNITS aUnit, double aValue )
{
switch( aUnit )
{
2019-12-20 14:11:39 +00:00
case EDA_UNITS::MILLIMETRES:
return IU_TO_MM( aValue );
case EDA_UNITS::MILS:
return IU_TO_MILS( aValue );
2019-12-20 14:11:39 +00:00
case EDA_UNITS::INCHES:
return IU_TO_IN( aValue );
2019-12-20 14:11:39 +00:00
case EDA_UNITS::DEGREES:
return aValue;
default:
return aValue;
}
}
/**
* Convert a value to a string using double notation.
*
* For readability, the mantissa has 0, 1, 3 or 4 digits, depending on units
* for unit = inch the mantissa has 3 digits (Eeschema) or 4 digits
* for unit = mil the mantissa has 0 digits (Eeschema) or 1 digits
* for unit = mm the mantissa has 3 digits (Eeschema) or 4 digits
* Should be used only to display info in status,
* but not in dialogs, because 4 digits only
* could truncate the actual value
*/
// A lower-precision (for readability) version of StringFromValue()
wxString MessageTextFromValue( EDA_UNITS aUnits, int aValue, bool aAddUnitLabel,
EDA_DATA_TYPE aType )
{
return MessageTextFromValue( aUnits, double( aValue ), aAddUnitLabel, aType );
}
// A lower-precision (for readability) version of StringFromValue()
wxString MessageTextFromValue( EDA_UNITS aUnits, long long int aValue, bool aAddUnitLabel,
EDA_DATA_TYPE aType )
{
return MessageTextFromValue( aUnits, double( aValue ), aAddUnitLabel, aType );
}
// A lower-precision (for readability) version of StringFromValue()
wxString MessageTextFromValue( EDA_UNITS aUnits, double aValue, bool aAddUnitLabel,
EDA_DATA_TYPE aType )
{
wxString text;
const wxChar* format;
double value = aValue;
switch( aType )
{
case EDA_DATA_TYPE::VOLUME:
value = To_User_Unit( aUnits, value );
// Fall through to continue computation
KI_FALLTHROUGH;
case EDA_DATA_TYPE::AREA:
value = To_User_Unit( aUnits, value );
// Fall through to continue computation
KI_FALLTHROUGH;
case EDA_DATA_TYPE::DISTANCE:
value = To_User_Unit( aUnits, value );
}
switch( aUnits )
{
default:
case EDA_UNITS::MILLIMETRES:
#if defined( EESCHEMA )
format = wxT( "%.2f" );
#else
format = wxT( "%.4f" );
#endif
break;
case EDA_UNITS::MILS:
#if defined( EESCHEMA )
format = wxT( "%.0f" );
#else
format = wxT( "%.2f" );
#endif
break;
case EDA_UNITS::INCHES:
#if defined( EESCHEMA )
format = wxT( "%.3f" );
#else
format = wxT( "%.4f" );
#endif
break;
case EDA_UNITS::DEGREES:
// 3 digits in mantissa should be good for rotation in degree
format = wxT( "%.3f" );
break;
case EDA_UNITS::UNSCALED:
format = wxT( "%.0f" );
break;
}
text.Printf( format, value );
if( aAddUnitLabel )
text += GetAbbreviatedUnitsLabel( aUnits, aType );
return text;
}
/**
* Convert a value to a string using double notation.
*
* For readability, the mantissa has 3 or more digits,
* the trailing 0 are removed if the mantissa has more than 3 digits
* and some trailing 0
* This function should be used to display values in dialogs because a value
* entered in mm (for instance 2.0 mm) could need up to 8 digits mantissa
* if displayed in inch to avoid truncation or rounding made just by the printf function.
* otherwise the actual value is rounded when read from dialog and converted
* in internal units, and therefore modified.
*/
wxString StringFromValue( EDA_UNITS aUnits, double aValue, bool aAddUnitSymbol,
EDA_DATA_TYPE aType )
{
2020-06-29 16:16:37 +00:00
double value_to_print = aValue;
switch( aType )
{
case EDA_DATA_TYPE::VOLUME:
value_to_print = To_User_Unit( aUnits, value_to_print );
2020-06-29 16:16:37 +00:00
KI_FALLTHROUGH;
case EDA_DATA_TYPE::AREA:
value_to_print = To_User_Unit( aUnits, value_to_print );
2020-06-29 16:16:37 +00:00
KI_FALLTHROUGH;
case EDA_DATA_TYPE::DISTANCE:
value_to_print = To_User_Unit( aUnits, value_to_print );
2020-06-29 16:16:37 +00:00
}
char buf[50];
2013-08-03 20:20:55 +00:00
if( value_to_print != 0.0 && fabs( value_to_print ) <= 0.0001 )
{
int len = sprintf( buf, "%.10f", value_to_print );
2013-08-03 20:20:55 +00:00
while( --len > 0 && buf[len] == '0' )
buf[len] = '\0';
if( buf[len]=='.' || buf[len]==',' )
buf[len] = '\0';
else
++len;
}
else
{
if( aUnits == EDA_UNITS::MILS )
sprintf( buf, "%.7g", value_to_print );
else
sprintf( buf, "%.10g", value_to_print );
2013-08-03 20:20:55 +00:00
}
wxString stringValue( buf, wxConvUTF8 );
if( aAddUnitSymbol )
stringValue += GetAbbreviatedUnitsLabel( aUnits, aType );
return stringValue;
}
double From_User_Unit( EDA_UNITS aUnits, double aValue )
{
switch( aUnits )
{
2019-12-20 14:11:39 +00:00
case EDA_UNITS::MILLIMETRES:
return MM_TO_IU( aValue );
case EDA_UNITS::MILS:
return MILS_TO_IU( aValue );
2019-12-20 14:11:39 +00:00
case EDA_UNITS::INCHES:
return IN_TO_IU( aValue );
default:
case EDA_UNITS::DEGREES:
2019-12-20 14:11:39 +00:00
case EDA_UNITS::UNSCALED:
case EDA_UNITS::PERCENT:
return aValue;
}
}
double DoubleValueFromString( EDA_UNITS aUnits, const wxString& aTextValue, EDA_DATA_TYPE aType )
{
double dtmp = 0;
// Acquire the 'right' decimal point separator
const struct lconv* lc = localeconv();
wxChar decimal_point = lc->decimal_point[0];
wxString buf( aTextValue.Strip( wxString::both ) );
// Convert any entered decimal point separators to the 'right' one
buf.Replace( wxT( "." ), wxString( decimal_point, 1 ) );
buf.Replace( wxT( "," ), wxString( decimal_point, 1 ) );
// Find the end of the numeric part
unsigned brk_point = 0;
while( brk_point < buf.Len() )
{
wxChar ch = buf[brk_point];
if( !( (ch >= '0' && ch <= '9') || (ch == decimal_point) || (ch == '-') || (ch == '+') ) )
break;
++brk_point;
}
// Extract the numeric part
buf.Left( brk_point ).ToDouble( &dtmp );
// Check the optional unit designator (2 ch significant)
wxString unit( buf.Mid( brk_point ).Strip( wxString::leading ).Left( 2 ).Lower() );
if( aUnits == EDA_UNITS::MILLIMETRES || aUnits == EDA_UNITS::MILS
|| aUnits == EDA_UNITS::INCHES )
{
if( unit == wxT( "mm" ) )
{
aUnits = EDA_UNITS::MILLIMETRES;
}
else if( unit == wxT( "mi" ) || unit == wxT( "th" ) )
{
aUnits = EDA_UNITS::MILS;
}
else if( unit == wxT( "in" ) || unit == wxT( "\"" ) )
{
2019-12-20 14:11:39 +00:00
aUnits = EDA_UNITS::INCHES;
}
else if( unit == "oz" ) // 1 oz = 1.37 mils
{
aUnits = EDA_UNITS::MILS;
dtmp *= 1.37;
}
}
2019-12-20 14:11:39 +00:00
else if( aUnits == EDA_UNITS::DEGREES )
{
if( unit == wxT( "ra" ) ) // Radians
dtmp *= 180.0f / M_PI;
}
2020-06-29 16:16:37 +00:00
switch( aType )
{
case EDA_DATA_TYPE::VOLUME:
dtmp = From_User_Unit( aUnits, dtmp );
2020-06-29 16:16:37 +00:00
KI_FALLTHROUGH;
case EDA_DATA_TYPE::AREA:
dtmp = From_User_Unit( aUnits, dtmp );
2020-06-29 16:16:37 +00:00
KI_FALLTHROUGH;
case EDA_DATA_TYPE::DISTANCE:
dtmp = From_User_Unit( aUnits, dtmp );
2020-06-29 16:16:37 +00:00
}
2020-06-29 16:16:37 +00:00
return dtmp;
}
void FetchUnitsFromString( const wxString& aTextValue, EDA_UNITS& aUnits )
{
wxString buf( aTextValue.Strip( wxString::both ) );
unsigned brk_point = 0;
while( brk_point < buf.Len() )
{
wxChar c = buf[brk_point];
if( !( (c >= '0' && c <='9') || (c == '.') || (c == ',') || (c == '-') || (c == '+') ) )
break;
++brk_point;
}
// Check the unit designator (2 ch significant)
wxString unit( buf.Mid( brk_point ).Strip( wxString::leading ).Left( 2 ).Lower() );
if( unit == wxT( "mm" ) )
2019-12-20 14:11:39 +00:00
aUnits = EDA_UNITS::MILLIMETRES;
else if( unit == wxT( "mi" ) || unit == wxT( "th" ) ) // "mils" or "thou"
aUnits = EDA_UNITS::MILS;
else if( unit == wxT( "in" ) || unit == wxT( "\"" ) )
2019-12-20 14:11:39 +00:00
aUnits = EDA_UNITS::INCHES;
else if( unit == wxT( "de" ) || unit == wxT( "ra" ) ) // "deg" or "rad"
2019-12-20 14:11:39 +00:00
aUnits = EDA_UNITS::DEGREES;
}
long long int ValueFromString( EDA_UNITS aUnits, const wxString& aTextValue, EDA_DATA_TYPE aType )
{
double value = DoubleValueFromString( aUnits, aTextValue, aType );
return KiROUND<double, long long int>( value );
}
wxString GetAbbreviatedUnitsLabel( EDA_UNITS aUnits, EDA_DATA_TYPE aType )
{
wxString label;
switch( aUnits )
{
case EDA_UNITS::MILLIMETRES: label = wxT( " mm" ); break;
case EDA_UNITS::DEGREES: label = wxT( "°" ); break;
case EDA_UNITS::MILS: label = wxT( " mils" ); break;
case EDA_UNITS::INCHES: label = wxT( " in" ); break;
case EDA_UNITS::PERCENT: label = wxT( "%" ); break;
case EDA_UNITS::UNSCALED: break;
default: UNIMPLEMENTED_FOR( "Unknown units" ); break;
}
switch( aType )
{
case EDA_DATA_TYPE::VOLUME: label += wxT( "³" ); break;
case EDA_DATA_TYPE::AREA: label += wxT( "²" ); break;
case EDA_DATA_TYPE::DISTANCE: break;
default: UNIMPLEMENTED_FOR( "Unknown measurement" ); break;
}
return label;
}
std::string FormatInternalUnits( int aValue )
{
char buf[50];
double engUnits = aValue;
int len;
engUnits /= IU_PER_MM;
if( engUnits != 0.0 && fabs( engUnits ) <= 0.0001 )
{
len = snprintf( buf, sizeof(buf), "%.10f", engUnits );
// Make sure snprintf() didn't fail and the locale numeric separator is correct.
wxCHECK( len >= 0 && len < 50 && strchr( buf, ',' ) == nullptr, std::string( "" ) );
while( --len > 0 && buf[len] == '0' )
buf[len] = '\0';
if( buf[len] == '.' )
buf[len] = '\0';
else
++len;
}
else
{
len = snprintf( buf, sizeof(buf), "%.10g", engUnits );
// Make sure snprintf() didn't fail and the locale numeric separator is correct.
wxCHECK( len >= 0 && len < 50 && strchr( buf, ',' ) == nullptr , std::string( "" ) );
}
return std::string( buf, len );
}
2022-01-14 15:34:41 +00:00
std::string FormatAngle( const EDA_ANGLE& aAngle )
{
char temp[50];
int len;
2022-01-14 15:34:41 +00:00
len = snprintf( temp, sizeof(temp), "%.10g", aAngle.AsDegrees() );
return std::string( temp, len );
}
std::string FormatInternalUnits( const wxPoint& aPoint )
{
return FormatInternalUnits( aPoint.x ) + " " + FormatInternalUnits( aPoint.y );
}
std::string FormatInternalUnits( const VECTOR2I& aPoint )
{
return FormatInternalUnits( aPoint.x ) + " " + FormatInternalUnits( aPoint.y );
}
std::string FormatInternalUnits( const wxSize& aSize )
{
return FormatInternalUnits( aSize.GetWidth() ) + " " + FormatInternalUnits( aSize.GetHeight() );
}