diff --git a/change_log.txt b/change_log.txt index dd9d3b7fd0..ae821500df 100644 --- a/change_log.txt +++ b/change_log.txt @@ -5,16 +5,27 @@ Started 2007-June-11 Please add newer entries at the top, list the date and your name with email address. +2008-Mar-3 UPDATE Dick Hollenbeck +================================================================================ ++pcbnew + Completed transision to BOARD::GetLayerName() and away from ReturnPcbLayerName(). + LayerNames and LAYER_T are saved int the *.brd file and may be edited + there with a text editor until the UI is in place to edit them in PCBNEW. + To understand the strategy, see BOARD::GetLayerName() in class_board.cpp + and see WinEDA_BasePcbFrame::ReadSetup(). I will be adding "Board" menu + item to Preferences, but there is more to come before the UI gets done: + net classes. + 2008-mars-03 UPDATE Jean-Pierre Charras ================================================================================ 3d display: - Added Jonas Diemer's patch (enhanced movings from mouse and tools) + Added Jonas Diemer's patch (enhanced movings from mouse and tools) + 2008-Mar-1 UPDATE Dick Hollenbeck ================================================================================ +pcbnew - Changed ioascii.cpp to save and load board specific layer names, for DEBUG build only. I want to add class LAYER, see below. Added BOARD::SetLayerName(), BOARD::SetLayerType(), and BOARD::GetLayerType(). diff --git a/common/common.cpp b/common/common.cpp index 4310def7d2..9afbf6e90d 100644 --- a/common/common.cpp +++ b/common/common.cpp @@ -265,8 +265,6 @@ void MyFree( void* pt_mem ) } - - /**************************************************************/ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding ) /**************************************************************/ @@ -276,32 +274,11 @@ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding ) * (not internatinalized, no space) */ { - -#if 1 && defined(DEBUG) - - // Dick: this code is working fine, but we have no place to store the layer names yet. - const unsigned LAYER_LIMIT = 29; - // @todo: these layer names should be configurable on a per project basis. - // In anticipation of that enhancement, here is a different strategy for - // deriving the file names from the "configured" layer names. - // The main idea is to use a single array of names, and then remove - // spaces on the fly from the names when writing to disk. + // These are only default layer names. For PCBNEW, the copper names + // may be over-ridden in the BOARD file *.brd. - -#if 1 // my specific layer names - static const wxString layer_name_list[] = { - _( "H2 Bottom" ), _( "Power" ), _( "V2 Signal" ), _( "H1 Signal" ), - _( "Ground" ), _( "Inner L5" ), _( "Inner L6" ), _( "Inner L7" ), - _( "Inner L8" ), _( "Inner L9" ), _( "Inner L10" ), _( "Inner L11" ), - _( "Inner L12" ), _( "Inner L13" ), _( "Inner L14" ), _( "Component" ), - _( "Adhes Cop" ), _( "Adhes Cmp" ), _( "SoldP Cop" ), _( "SoldP Cmp" ), - _( "SilkS Cop" ), _( "SilkS Cmp" ), _( "Mask Cop" ), _( "Mask Cmp" ), - _( "Drawings " ), _( "Comments" ), _( "Eco1" ), _( "Eco2" ), - _( "Edges Pcb" ), _( "BAD INDEX" ), - }; -#else static const wxString layer_name_list[] = { _( "Copper " ), _( "Inner L1 " ), _( "Inner L2 " ), _( "Inner L3 " ), _( "Inner L4 " ), _( "Inner L5 " ), _( "Inner L6 " ), _( "Inner L7 " ), @@ -313,8 +290,6 @@ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding ) _( "Edges Pcb" ), _( "BAD INDEX" ), }; -#endif - if( (unsigned) layer_number > LAYER_LIMIT ) layer_number = LAYER_LIMIT; @@ -332,42 +307,6 @@ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding ) } else return *p; - -#else // long standing established code: - - static const wxString layer_name_list[] = { - _( "Copper " ), _( "Inner L1 " ), _( "Inner L2 " ), _( "Inner L3 " ), - _( "Inner L4 " ), _( "Inner L5 " ), _( "Inner L6 " ), _( "Inner L7 " ), - _( "Inner L8 " ), _( "Inner L9 " ), _( "Inner L10" ), _( "Inner L11" ), - _( "Inner L12" ), _( "Inner L13" ), _( "Inner L14" ), _( "Component" ), - _( "Adhes Cop" ), _( "Adhes Cmp" ), _( "SoldP Cop" ), _( "SoldP Cmp" ), - _( "SilkS Cop" ), _( "SilkS Cmp" ), _( "Mask Cop " ), _( "Mask Cmp " ), - _( "Drawings " ), _( "Comments " ), _( "Eco1 " ), _( "Eco2 " ), - _( "Edges Pcb" ), _( "--- " ), _( "--- " ), _( "--- " ) - }; - - - // Same as layer_name_list, without space, not internationalized - static const wxString layer_name_list_for_filename[] = { - wxT( "Copper" ), wxT( "InnerL1" ), wxT( "InnerL2" ), wxT( "InnerL3" ), - wxT( "InnerL4" ), wxT( "InnerL5" ), wxT( "InnerL6" ), wxT( "InnerL7" ), - wxT( "InnerL8" ), wxT( "InnerL9" ), wxT( "InnerL10" ), wxT( "InnerL11" ), - wxT( "InnerL12" ), wxT( "InnerL13" ), wxT( "InnerL14" ), wxT( "Component" ), - wxT( "AdhesCop" ), wxT( "AdhesCmp" ), wxT( "SoldPCop" ), wxT( "SoldPCmp" ), - wxT( "SilkSCop" ), wxT( "SilkSCmp" ), wxT( "MaskCop" ), wxT( "MaskCmp" ), - wxT( "Drawings" ), wxT( "Comments" ), wxT( "Eco1" ), wxT( "Eco2" ), - wxT( "EdgesPcb" ), wxT( "---" ), wxT( "---" ), wxT( "---" ) - }; - - - if( (unsigned) layer_number >= 31u ) - layer_number = 31; - - return omitSpacePadding ? - layer_name_list_for_filename[layer_number] : - layer_name_list[layer_number]; -#endif - } diff --git a/common/projet_config.cpp b/common/projet_config.cpp index 7f3e02a863..f991d903ac 100644 --- a/common/projet_config.cpp +++ b/common/projet_config.cpp @@ -125,8 +125,8 @@ void WinEDA_App::WriteProjectConfig( const wxString& local_config_filename, switch( pt_cfg->m_Type ) { case PARAM_INT: - #undef PTCFG - #define PTCFG ( (PARAM_CFG_INT*) pt_cfg ) + #undef PTCFG + #define PTCFG ( (PARAM_CFG_INT*) pt_cfg ) if( PTCFG->m_Pt_param == NULL ) break; @@ -319,7 +319,8 @@ bool WinEDA_App::ReadProjectConfig( const wxString& local_config_filename, { #undef PTCFG #define PTCFG ( (PARAM_CFG_DOUBLE*) pt_cfg ) - double ftmp = 0; wxString msg; + double ftmp = 0; + wxString msg; if( pt_cfg->m_Setup ) msg = m_EDA_Config->Read( pt_cfg->m_Ident, wxT( "" ) ); else diff --git a/cvpcb/cfg.cpp b/cvpcb/cfg.cpp index a416e9d979..9aaa43ee48 100644 --- a/cvpcb/cfg.cpp +++ b/cvpcb/cfg.cpp @@ -1,6 +1,6 @@ - /***************************************/ - /** cfg.cpp : configuration de CVPCB **/ - /***************************************/ +/***************************************/ +/** cfg.cpp : configuration de CVPCB **/ +/***************************************/ /* lit ou met a jour la configuration de CVPCB */ @@ -18,68 +18,76 @@ /**************************************************/ -void Read_Config( const wxString & FileName ) +void Read_Config( const wxString& FileName ) /**************************************************/ + /* lit la configuration - 1 - lit cvpcb.cnf - 2 - si non trouve lit /cvpcb.cnf - 3 - si non trouve: init des variables aux valeurs par defaut - -Remarque: - le chemin de l'executable cvpcb.exe doit etre dans BinDir -*/ + * 1 - lit cvpcb.cnf + * 2 - si non trouve lit /cvpcb.cnf + * 3 - si non trouve: init des variables aux valeurs par defaut + * + * Remarque: + * le chemin de l'executable cvpcb.exe doit etre dans BinDir + */ { -wxString FullFileName = FileName ; + wxString FullFileName = FileName; - /* Init des valeurs par defaut */ - g_LibName_List.Clear(); - g_ListName_Equ.Clear(); + /* Init des valeurs par defaut */ + g_LibName_List.Clear(); + g_ListName_Equ.Clear(); - g_EDA_Appl->ReadProjectConfig(FullFileName, - GROUP, ParamCfgList, FALSE); + g_EDA_Appl->ReadProjectConfig( FullFileName, + GROUP, ParamCfgList, FALSE ); - if ( PkgInExtBuffer.IsEmpty() ) PkgInExtBuffer = wxT(".pkg"); - if ( NetInExtBuffer.IsEmpty() ) NetInExtBuffer = wxT(".net"), + if( PkgInExtBuffer.IsEmpty() ) + PkgInExtBuffer = wxT( ".pkg" ); - /* Inits autres variables */ - SetRealLibraryPath( wxT("modules")); + if( NetInExtBuffer.IsEmpty() ) + NetInExtBuffer = wxT( ".net" ); + + /* Inits autres variables */ + SetRealLibraryPath( wxT( "modules" ) ); } /************************************************************/ -void WinEDA_CvpcbFrame::Update_Config(wxCommandEvent& event) +void WinEDA_CvpcbFrame::Update_Config( wxCommandEvent& event ) /************************************************************/ + /* fonction relai d'appel a Save_Config, - la vraie fonction de sauvegarde de la config -*/ + * la vraie fonction de sauvegarde de la config + */ { - Save_Config(this); + Save_Config( this ); } + /************************************/ -void Save_Config(wxWindow * parent) +void Save_Config( wxWindow* parent ) /************************************/ /* enregistrement de la config */ { -wxString path, FullFileName; -wxString mask( wxT("*")); - - FullFileName = FFileName; - ChangeFileNameExt( FullFileName, g_Prj_Config_Filename_ext ); + wxString path, FullFileName; - path = wxGetCwd(); - FullFileName = EDA_FileSelector(_("Save preferences"), - path, /* Chemin par defaut */ - FullFileName, /* nom fichier par defaut */ - g_Prj_Config_Filename_ext, /* extension par defaut */ - mask, /* Masque d'affichage */ - parent, - wxFD_SAVE, - TRUE - ); - if ( FullFileName.IsEmpty()) return; + wxString mask( wxT( "*" ) ); - /* ecriture de la configuration */ - g_EDA_Appl->WriteProjectConfig(FullFileName, GROUP, ParamCfgList); + FullFileName = FFileName; + ChangeFileNameExt( FullFileName, g_Prj_Config_Filename_ext ); + + path = wxGetCwd(); + FullFileName = EDA_FileSelector( _( "Save preferences" ), + path, /* Chemin par defaut */ + FullFileName, /* nom fichier par defaut */ + g_Prj_Config_Filename_ext, /* extension par defaut */ + mask, /* Masque d'affichage */ + parent, + wxFD_SAVE, + TRUE + ); + + if( FullFileName.IsEmpty() ) + return; + + /* ecriture de la configuration */ + g_EDA_Appl->WriteProjectConfig( FullFileName, GROUP, ParamCfgList ); } - diff --git a/cvpcb/displayframe.cpp b/cvpcb/displayframe.cpp index 1f36354f46..596ea2223f 100644 --- a/cvpcb/displayframe.cpp +++ b/cvpcb/displayframe.cpp @@ -51,7 +51,7 @@ WinEDA_DisplayFrame::WinEDA_DisplayFrame( wxWindow* father, WinEDA_App* parent, #endif SetTitle( title ); - m_Pcb = new BOARD( NULL, this ); + m_Pcb = new BOARD( NULL, this ); m_CurrentScreen = new PCB_SCREEN( CVPCB_DISPLAY_FRAME ); diff --git a/gerbview/gerbview.cpp b/gerbview/gerbview.cpp index d427f5629e..99dce3b786 100644 --- a/gerbview/gerbview.cpp +++ b/gerbview/gerbview.cpp @@ -55,8 +55,6 @@ bool WinEDA_App::OnInit() SetTopWindow( m_GerberFrame ); m_GerberFrame->Show( TRUE ); - m_GerberFrame->m_Pcb = new BOARD( NULL, m_GerberFrame ); - m_GerberFrame->Zoom_Automatique( TRUE ); if( argc > 1 ) diff --git a/gerbview/gerbview_config.cpp b/gerbview/gerbview_config.cpp index c1d7c5fae6..5c03631b1d 100644 --- a/gerbview/gerbview_config.cpp +++ b/gerbview/gerbview_config.cpp @@ -16,13 +16,16 @@ #include "protos.h" -/* Routines Locales */ - -/* Variables locales */ #define HOTKEY_FILENAME wxT( "gerbview" ) +/* Routines Locales */ + + +/* Variables locales */ + + /*************************************************************/ void WinEDA_GerberFrame::Process_Config( wxCommandEvent& event ) /*************************************************************/ @@ -32,7 +35,8 @@ void WinEDA_GerberFrame::Process_Config( wxCommandEvent& event ) wxString FullFileName; pos = GetPosition(); - pos.x += 20; pos.y += 20; + pos.x += 20; + pos.y += 20; switch( id ) { @@ -69,7 +73,7 @@ void WinEDA_GerberFrame::Process_Config( wxCommandEvent& event ) case ID_PREFERENCES_HOTKEY_PATH_IS_HOME: case ID_PREFERENCES_HOTKEY_PATH_IS_KICAD: - HandleHotkeyConfigMenuSelection( this, id ); + HandleHotkeyConfigMenuSelection( this, id ); break; default: diff --git a/gerbview/select_layers_to_pcb.cpp b/gerbview/select_layers_to_pcb.cpp index 0344b9f7da..5e498b2f4f 100644 --- a/gerbview/select_layers_to_pcb.cpp +++ b/gerbview/select_layers_to_pcb.cpp @@ -13,10 +13,11 @@ #include "wx/statline.h" /* Variables locales */ -#define LAYER_UNSELECTED NB_LAYERS -static int ButtonTable[32]; // Indexes buttons to Gerber layers -static int LayerLookUpTable[32]; // Indexes Gerber layers to PCB file layers -wxStaticText* layer_list[32]; // Indexes text strings to buttons +#define LAYER_UNSELECTED NB_LAYERS + +static int ButtonTable[32]; // Indexes buttons to Gerber layers +static int LayerLookUpTable[32]; // Indexes Gerber layers to PCB file layers +wxStaticText* layer_list[32]; // Indexes text strings to buttons enum swap_layer_id { ID_WINEDA_SWAPLAYERFRAME = 1800, @@ -75,12 +76,13 @@ int * InstallDialogLayerPairChoice(WinEDA_GerberFrame * parent) */ { WinEDA_SwapLayerFrame * frame = new WinEDA_SwapLayerFrame(parent); - int ii = frame->ShowModal(); - frame->Destroy(); - if( ii >= 0 ) - return LayerLookUpTable; - else - return NULL; + + int ii = frame->ShowModal(); + frame->Destroy(); + if( ii >= 0 ) + return LayerLookUpTable; + else + return NULL; } @@ -138,7 +140,6 @@ WinEDA_SwapLayerFrame::WinEDA_SwapLayerFrame(WinEDA_GerberFrame *parent) : int pcb_layer_number = 0; for( nb_items = 0, ii = 0; ii < 32; ii++ ) { - if( g_GERBER_Descr_List[ii] == NULL ) continue; @@ -353,8 +354,8 @@ void WinEDA_SwapLayerFrame::OnCancelClick(wxCommandEvent& event) void WinEDA_SwapLayerFrame::OnOkClick(wxCommandEvent& event) /*********************************************************/ { -int ii; -bool AsCmpLayer = false; + int ii; + bool AsCmpLayer = false; /* Compute the number of copper layers * this is the max layer number + 1 (if some internal layers exist) diff --git a/include/pcbstruct.h b/include/pcbstruct.h index 6c86fcd0f5..84c04d99e8 100644 --- a/include/pcbstruct.h +++ b/include/pcbstruct.h @@ -148,38 +148,6 @@ struct CHEVELU; /* Class to handle a board */ #include "class_board.h" - -/** - * Class LAYER - * holds information pertinent to a layer of a BOARD. - */ -class LAYER -{ - wxString m_Name; - LAYER_T m_Type; - int m_Color; - bool m_Visible; // ? use flags in m_Color instead ? - -public: - bool SetName( const wxString& aLayerName ); - - const wxString& GetName(); - - bool SetType( LAYER_T aLayerType ); - - LAYER_T GetType(); - - int GetColor() { return m_Color; } - - void SetColor( int aColor ) { m_Color = aColor; } - - bool IsVisible(); - - void SetVisible( bool isVisible ); -}; - - - // Class for handle current printed board design settings #define HISTORY_NUMBER 8 class EDA_BoardDesignSettings @@ -207,7 +175,9 @@ public: // Color options for screen display of the Printed Board: int m_PcbGridColor; // Grid color + int m_LayerColor[32]; // Layer colors (tracks and graphic items) + int m_ViaColor[4]; // Via color (depending on is type) int m_ModuleTextCMPColor; // Text module color for modules on the COMPONENT layer int m_ModuleTextCUColor; // Text module color for modules on the COPPER layer diff --git a/include/wxPcbStruct.h b/include/wxPcbStruct.h index 2a70b06433..98dc609d7f 100644 --- a/include/wxPcbStruct.h +++ b/include/wxPcbStruct.h @@ -74,6 +74,14 @@ public: ~WinEDA_BasePcbFrame(); + /** + * Function SetBOARD + * sets the m_Pcb member in such as way as to ensure deleting any previous + * BOARD. + * @param aBoard The BOARD to put into the frame. + */ + void SetBOARD( BOARD* aBoard ); + // General virtual void OnCloseWindow( wxCloseEvent& Event ) = 0; virtual void Process_Special_Functions( wxCommandEvent& event ) = 0; @@ -378,7 +386,7 @@ public: bool RecreateCmpFileFromBoard(); void ExportToGenCAD( wxCommandEvent& event ); - + /** * Function ExporttoSPECCTRA * will export the current BOARD to a specctra dsn file. See @@ -389,7 +397,7 @@ public: /** * Function ImportSpecctraSession - * will import a specctra *.ses file and use it to relocate MODULEs and + * will import a specctra *.ses file and use it to relocate MODULEs and * to replace all vias and tracks in an existing and loaded BOARD. * See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the * specification. @@ -398,13 +406,13 @@ public: /** * Function ImportSpecctraDesign - * will import a specctra *.dsn file and use it to replace an entire BOARD. + * will import a specctra *.dsn file and use it to replace an entire BOARD. * The new board will not have any graphics, only components, tracks and vias. * See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the * specification. */ void ImportSpecctraDesign( wxCommandEvent& event ); - + /* Fonctions specifiques */ MODULE* ListAndSelectModuleName(); void Liste_Equipot( wxCommandEvent& event ); @@ -499,12 +507,12 @@ public: - /** Function Delete_LastCreatedCorner - * Used only while creating a new zone outline - * Remove and delete the current outline segment in progress - * @return 0 if no corner in list, or corner number - */ - int Delete_LastCreatedCorner( wxDC* DC); + /** Function Delete_LastCreatedCorner + * Used only while creating a new zone outline + * Remove and delete the current outline segment in progress + * @return 0 if no corner in list, or corner number + */ + int Delete_LastCreatedCorner( wxDC* DC); /** * Function Begin_Zone @@ -517,7 +525,7 @@ public: * Function End_Zone * terminates (if no DRC error ) the zone edge creation process * @param DC = current Device Context - * @return true if Ok, false if DRC error + * @return true if Ok, false if DRC error */ bool End_Zone( wxDC* DC ); @@ -586,11 +594,11 @@ public: ZONE_CONTAINER* zone_container, int corner_id ); - /** - * Function End_Move_Zone_Corner_Or_Outlines - * Terminates a move corner in a zone outline, or a move zone outlines - * @param DC = current Device Context (can be NULL) - * @param zone_container: the given zone + /** + * Function End_Move_Zone_Corner_Or_Outlines + * Terminates a move corner in a zone outline, or a move zone outlines + * @param DC = current Device Context (can be NULL) + * @param zone_container: the given zone */ void End_Move_Zone_Corner_Or_Outlines( wxDC* DC, ZONE_CONTAINER* zone_container ); @@ -612,13 +620,13 @@ public: */ void Delete_Zone_Contour( wxDC* DC, ZONE_CONTAINER* zone_container ); - /** - * Function Start_Move_Zone_Outlines - * Initialise parametres to move an existing zone outlines. + /** + * Function Start_Move_Zone_Outlines + * Initialise parametres to move an existing zone outlines. * @param DC = current Device Context (can be NULL) - * @param zone_container: the given zone to move - */ - void Start_Move_Zone_Outlines( wxDC* DC, ZONE_CONTAINER* zone_container ); + * @param zone_container: the given zone to move + */ + void Start_Move_Zone_Outlines( wxDC* DC, ZONE_CONTAINER* zone_container ); // Target handling MIREPCB* Create_Mire( wxDC* DC ); @@ -725,7 +733,7 @@ public: int BestZoom(); // Retourne le meilleur zoom void OnSelectOptionToolbar( wxCommandEvent& event ); void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct ); - PCB_SCREEN* GetPCBScreen(){ return (PCB_SCREEN*)GetScreen(); } + PCB_SCREEN* GetPCBScreen(){ return (PCB_SCREEN*)GetScreen(); } EDA_BaseStruct* GerberGeneralLocateAndDisplay(); EDA_BaseStruct* Locate( int typeloc ); diff --git a/pcbnew/basepcbframe.cpp b/pcbnew/basepcbframe.cpp index b1f94e67f0..8c927cb11e 100644 --- a/pcbnew/basepcbframe.cpp +++ b/pcbnew/basepcbframe.cpp @@ -66,6 +66,13 @@ WinEDA_BasePcbFrame::~WinEDA_BasePcbFrame( void ) } +void WinEDA_BasePcbFrame::SetBOARD( BOARD* aBoard ) +{ + delete m_Pcb; + m_Pcb = aBoard; +} + + /**************************************/ int WinEDA_BasePcbFrame::BestZoom( void ) /**************************************/ @@ -102,7 +109,7 @@ void WinEDA_BasePcbFrame::CursorGoto( const wxPoint& aPos ) { // factored out of pcbnew/find.cpp - PCB_SCREEN* screen = (PCB_SCREEN*)GetScreen(); + PCB_SCREEN* screen = (PCB_SCREEN*)GetScreen(); wxClientDC dc( DrawPanel ); diff --git a/pcbnew/class_board.cpp b/pcbnew/class_board.cpp index cee325e969..9bdd28a455 100644 --- a/pcbnew/class_board.cpp +++ b/pcbnew/class_board.cpp @@ -38,6 +38,12 @@ BOARD::BOARD( EDA_BaseStruct* parent, WinEDA_BasePcbFrame* frame ) : m_LocalRatsnest = NULL; // pointeur liste rats local m_CurrentZoneContour = NULL; // This ZONE_CONTAINER handle the zone contour cuurently in progress // de determination des contours de zone + + for( int layer=0; layer 20 ) + return false; + + // no quote chars in the name allowed + if( aLayerName.Find( wxChar('"') ) != wxNOT_FOUND ) + return false; + + // ensure unique-ness of layer names + for( int layer=0; layer ZONE_CONTAINERS; // @todo: switch to boost::ptr_vector, and change ~BOARD() ZONE_CONTAINERS m_ZoneDescriptorList; ///< edge zone descriptors, owned by pointer + LAYER m_Layer[NB_COPPER_LAYERS]; + public: WinEDA_BasePcbFrame* m_PcbFrame; // Window de visualisation EDA_Rect m_BoundaryBox; // Board size and position @@ -294,6 +331,7 @@ public: return wxT( "BOARD" ); } + #if defined(DEBUG) /** * Function Show diff --git a/pcbnew/class_drawsegment.cpp b/pcbnew/class_drawsegment.cpp index ce9e272865..4862090f43 100644 --- a/pcbnew/class_drawsegment.cpp +++ b/pcbnew/class_drawsegment.cpp @@ -150,6 +150,9 @@ void DRAWSEGMENT::Display_Infos( WinEDA_DrawFrame* frame ) int itype; wxString msg; + BOARD* board = (BOARD*) m_Parent; + wxASSERT( board ); + frame->MsgPanel->EraseMsgBox(); itype = m_Type & 0x0F; @@ -173,7 +176,7 @@ void DRAWSEGMENT::Display_Infos( WinEDA_DrawFrame* frame ) Affiche_1_Parametre( frame, -1, wxEmptyString, _( "Segment" ), RED ); Affiche_1_Parametre( frame, 48, _( "Layer" ), - ReturnPcbLayerName( m_Layer ), BROWN ); + board->GetLayerName( m_Layer ), BROWN ); valeur_param( (unsigned) m_Width, msg ); Affiche_1_Parametre( frame, 60, _( "Width" ), msg, DARKCYAN ); diff --git a/pcbnew/class_module.cpp b/pcbnew/class_module.cpp index ffbc3d6e50..e4c6d27692 100644 --- a/pcbnew/class_module.cpp +++ b/pcbnew/class_module.cpp @@ -1135,15 +1135,6 @@ bool MODULE::HitTest( const wxPoint& refPos ) if( m_BoundaryBox.Inside( spot_cX, spot_cY ) ) return true; -/* no - // The GENERAL_COLLECTOR needs these two tests in order to find a MODULE - // when the user clicks on its text. Keep these 2, needed in OnRightClick(). - if( m_Reference->HitTest( refPos ) ) - return true; - - if( m_Value->HitTest( refPos ) ) - return true; -*/ return false; } @@ -1173,6 +1164,25 @@ bool MODULE::HitTest( EDA_Rect& refArea ) } +D_PAD* MODULE::FindPadByName( const wxString& aPadName ) const +{ + wxString buf; + + for( D_PAD* pad = m_Pads; pad; pad = pad->Next() ) + { + pad->ReturnStringPadName( buf ); +#if 1 + if( buf.CmpNoCase( aPadName ) == 0 ) // why case insensitive? +#else + if( buf == aPadName ) +#endif + return pad; + } + + return NULL; +} + + // see class_module.h SEARCH_RESULT MODULE::Visit( INSPECTOR* inspector, const void* testData, const KICAD_T scanTypes[] ) diff --git a/pcbnew/class_module.h b/pcbnew/class_module.h index b1e46ced8d..1fb01a38ce 100644 --- a/pcbnew/class_module.h +++ b/pcbnew/class_module.h @@ -65,7 +65,7 @@ public: unsigned long m_Link; // variable temporaire ( pour editions, ...) long m_LastEdit_Time; // Date de la derniere modification du module (gestion de librairies) - wxString m_Path; + wxString m_Path; wxString m_Doc; // Texte de description du module wxString m_KeyWord; // Liste des mots cles relatifs au module @@ -197,6 +197,17 @@ public: return m_Value->m_Text; } + + /** + * Function FindPadByName + * returns a D_PAD* with a matching name. Note that names may not be + * unique, depending on how the foot print was created. + * @param + * @return D_PAD* - The first matching name is returned, or NULL if not found. + */ + D_PAD* FindPadByName( const wxString& aPadName ) const; + + /** * Function Visit * should be re-implemented for each derived class in order to handle diff --git a/pcbnew/class_pcb_text.cpp b/pcbnew/class_pcb_text.cpp index ac7fa95e90..e9a69c5643 100644 --- a/pcbnew/class_pcb_text.cpp +++ b/pcbnew/class_pcb_text.cpp @@ -119,26 +119,26 @@ bool TEXTE_PCB::Save( FILE* aFile ) const if( m_Text.IsEmpty() ) return true; - + bool rc = false; - + if( fprintf( aFile, "$TEXTPCB\n" ) != sizeof("$TEXTPCB\n")-1 ) goto out; - + fprintf( aFile, "Te \"%s\"\n", CONV_TO_UTF8( m_Text ) ); fprintf( aFile, "Po %d %d %d %d %d %d\n", m_Pos.x, m_Pos.y, m_Size.x, m_Size.y, m_Width, m_Orient ); fprintf( aFile, "De %d %d %lX %d\n", m_Layer, m_Miroir, m_TimeStamp, 0 ); - + if( fprintf( aFile, "$EndTEXTPCB\n" ) != sizeof("$EndTEXTPCB\n")-1 ) goto out; - + rc = true; -out: +out: return rc; } - - + + /**********************************************************************/ @@ -167,15 +167,18 @@ void TEXTE_PCB::Display_Infos( WinEDA_DrawFrame* frame ) { wxString msg; + BOARD* board = (BOARD*) m_Parent; + wxASSERT( board ); + frame->MsgPanel->EraseMsgBox(); if( m_Parent && m_Parent->Type() == TYPECOTATION ) Affiche_1_Parametre( frame, 1, _( "COTATION" ), m_Text, DARKGREEN ); else Affiche_1_Parametre( frame, 1, _( "PCB Text" ), m_Text, DARKGREEN ); - + Affiche_1_Parametre( frame, 28, _( "Layer" ), - ReturnPcbLayerName( m_Layer ), + board->GetLayerName( m_Layer ), g_DesignSettings.m_LayerColor[m_Layer] & MASKCOLOR ); Affiche_1_Parametre( frame, 36, _( "Mirror" ), wxEmptyString, GREEN ); @@ -203,7 +206,7 @@ void TEXTE_PCB::Display_Infos( WinEDA_DrawFrame* frame ) /** * Function Show * is used to output the object tree, currently for debugging only. - * @param nestLevel An aid to prettier tree indenting, and is the level + * @param nestLevel An aid to prettier tree indenting, and is the level * of nesting of this object within the overall tree. * @param os The ostream& to output to. */ @@ -211,8 +214,8 @@ void TEXTE_PCB::Show( int nestLevel, std::ostream& os ) { // for now, make it look like XML: NestedSpace( nestLevel, os ) << '<' << GetClass().Lower().mb_str() << - " string=\"" << m_Text.mb_str() << "\"/>\n"; - + " string=\"" << m_Text.mb_str() << "\"/>\n"; + // NestedSpace( nestLevel, os ) << "\n"; } diff --git a/pcbnew/class_text_mod.cpp b/pcbnew/class_text_mod.cpp index c84115c561..f4b2e1d8bf 100644 --- a/pcbnew/class_text_mod.cpp +++ b/pcbnew/class_text_mod.cpp @@ -41,21 +41,21 @@ TEXTE_MODULE::TEXTE_MODULE( MODULE* parent, int text_type ) : m_Orient = 0; /* en 1/10 degre */ m_Miroir = 1; // Mode normal (pas de miroir) m_Unused = 0; - + SetLayer( SILKSCREEN_N_CMP ); if( Module && (Module->Type() == TYPEMODULE) ) { m_Pos = Module->m_Pos; int moduleLayer = Module->GetLayer(); - + if( moduleLayer == COPPER_LAYER_N ) SetLayer( SILKSCREEN_N_CU ); else if( moduleLayer == CMP_N ) SetLayer( SILKSCREEN_N_CMP ); - else + else SetLayer( moduleLayer ); - + if( moduleLayer == SILKSCREEN_N_CU || moduleLayer == ADHESIVE_N_CU || moduleLayer == COPPER_LAYER_N ) @@ -75,20 +75,20 @@ bool TEXTE_MODULE::Save( FILE* aFile ) const { MODULE* parent = (MODULE*) GetParent(); int orient = m_Orient; - + if( parent ) orient += parent->m_Orient; - + int ret = fprintf( aFile, "T%d %d %d %d %d %d %d %c %c %d \"%.16s\"\n", m_Type, m_Pos0.x, m_Pos0.y, m_Size.y, m_Size.x, - orient, + orient, m_Width, m_Miroir ? 'N' : 'M', m_NoShow ? 'I' : 'V', GetLayer(), CONV_TO_UTF8( m_Text ) ); - + return (ret > 20); } @@ -209,11 +209,11 @@ bool TEXTE_MODULE::HitTest( const wxPoint& posref ) /* le point de reference est tourn�de - angle * pour se ramener a un rectangle de reference horizontal */ - mX = posref.x - m_Pos.x; + mX = posref.x - m_Pos.x; mY = posref.y - m_Pos.y; - + RotatePoint( &mX, &mY, -angle ); - + /* le point de reference est-il dans ce rectangle */ if( ( abs( mX ) <= abs( dx ) ) && ( abs( mY ) <= abs( dy ) ) ) { @@ -257,7 +257,7 @@ void TEXTE_MODULE::Draw( WinEDA_DrawPanel* panel, wxDC* DC, wxPoint offset, int orient = GetDrawRotation(); miroir = m_Miroir & 1; // = 0 si vu en miroir width = m_Width; - + if( (frame->m_DisplayModText == FILAIRE) || ( (width / zoom) < L_MIN_DESSIN ) ) width = 0; else if( frame->m_DisplayModText == SKETCH ) @@ -281,7 +281,7 @@ void TEXTE_MODULE::Draw( WinEDA_DrawPanel* panel, wxDC* DC, wxPoint offset, int if( Module && Module->GetLayer() == COPPER_LAYER_N ) color = g_ModuleTextCUColor; - + else if( Module && Module->GetLayer() == CMP_N ) color = g_ModuleTextCMPColor; @@ -290,7 +290,7 @@ void TEXTE_MODULE::Draw( WinEDA_DrawPanel* panel, wxDC* DC, wxPoint offset, int if( m_NoShow ) color = g_ModuleTextNOVColor; - + if( (color & ITEM_NOT_SHOW) != 0 ) return; @@ -330,20 +330,25 @@ int TEXTE_MODULE::GetDrawRotation() } -// see class_text_mod.h -void TEXTE_MODULE::Display_Infos( WinEDA_DrawFrame* frame ) +// see class_text_mod.h +void TEXTE_MODULE::Display_Infos( WinEDA_DrawFrame* frame ) { wxString msg, Line; int ii; - + MODULE* module = (MODULE*) m_Parent; - + + wxASSERT( module ); + if( !module ) return; - static const wxString text_type_msg[3] = { + BOARD* board = (BOARD*) module->m_Parent; + wxASSERT( board ); + + static const wxString text_type_msg[3] = { _( "Ref." ), _( "Value" ), _( "Text" ) }; - + frame->MsgPanel->EraseMsgBox(); Line = module->m_Reference->m_Text; @@ -352,10 +357,10 @@ void TEXTE_MODULE::Display_Infos( WinEDA_DrawFrame* frame ) Line = m_Text; Affiche_1_Parametre( frame, 10, _( "Text" ), Line, YELLOW ); - ii = m_Type; + ii = m_Type; if( ii > 2 ) ii = 2; - + Affiche_1_Parametre( frame, 20, _( "Type" ), text_type_msg[ii], DARKGREEN ); Affiche_1_Parametre( frame, 25, _( "Display" ), wxEmptyString, DARKGREEN ); @@ -366,7 +371,7 @@ void TEXTE_MODULE::Display_Infos( WinEDA_DrawFrame* frame ) ii = m_Layer; if( ii < NB_LAYERS ) - Affiche_1_Parametre( frame, 28, _( "Layer" ), ReturnPcbLayerName( ii ), DARKGREEN ); + Affiche_1_Parametre( frame, 28, _( "Layer" ), board->GetLayerName( ii ), DARKGREEN ); else { msg.Printf( wxT( "%d" ), ii ); @@ -376,7 +381,7 @@ void TEXTE_MODULE::Display_Infos( WinEDA_DrawFrame* frame ) msg = wxT( " Yes" ); if( m_Miroir & 1 ) msg = wxT( " No" ); - + Affiche_1_Parametre( frame, 36, _( "Mirror" ), msg, DARKGREEN ); msg.Printf( wxT( "%.1f" ), (float) m_Orient / 10 ); @@ -402,27 +407,27 @@ bool TEXTE_MODULE::IsOnLayer( int aLayer ) const /* test the parent, which is a MODULE */ if( aLayer == GetParent()->GetLayer() ) return true; - + if( aLayer == COPPER_LAYER_N ) { if( m_Layer==ADHESIVE_N_CU || m_Layer==SILKSCREEN_N_CU ) return true; } - + else if( aLayer == CMP_N ) { if( m_Layer==ADHESIVE_N_CMP || m_Layer==SILKSCREEN_N_CMP ) return true; } - + return false; } - + /* see class_text_mod.h bool TEXTE_MODULE::IsOnOneOfTheseLayers( int aLayerMask ) const { - + } */ @@ -431,7 +436,7 @@ bool TEXTE_MODULE::IsOnOneOfTheseLayers( int aLayerMask ) const /** * Function Show * is used to output the object tree, currently for debugging only. - * @param nestLevel An aid to prettier tree indenting, and is the level + * @param nestLevel An aid to prettier tree indenting, and is the level * of nesting of this object within the overall tree. * @param os The ostream& to output to. */ @@ -439,8 +444,8 @@ void TEXTE_MODULE::Show( int nestLevel, std::ostream& os ) { // for now, make it look like XML: NestedSpace( nestLevel, os ) << '<' << GetClass().Lower().mb_str() << - " string=\"" << m_Text.mb_str() << "\"/>\n"; - + " string=\"" << m_Text.mb_str() << "\"/>\n"; + // NestedSpace( nestLevel, os ) << "\n"; } #endif diff --git a/pcbnew/class_zone.cpp b/pcbnew/class_zone.cpp index 89733c475f..aca818adf5 100644 --- a/pcbnew/class_zone.cpp +++ b/pcbnew/class_zone.cpp @@ -248,7 +248,7 @@ void ZONE_CONTAINER::Draw( WinEDA_DrawPanel* panel, wxDC* DC, const wxPoint& off if( DC == NULL ) return; - wxPoint seg_start, seg_end; + wxPoint seg_start, seg_end; int curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer; int color = g_DesignSettings.m_LayerColor[m_Layer]; @@ -319,9 +319,9 @@ void ZONE_CONTAINER::DrawWhileCreateOutline( WinEDA_DrawPanel* panel, wxDC* DC, * @param draw_mode = draw mode: OR, XOR .. */ { - int current_gr_mode = draw_mode; - bool is_close_segment = false; - wxPoint seg_start, seg_end; + int current_gr_mode = draw_mode; + bool is_close_segment = false; + wxPoint seg_start, seg_end; if( DC == NULL ) return; @@ -339,7 +339,7 @@ void ZONE_CONTAINER::DrawWhileCreateOutline( WinEDA_DrawPanel* panel, wxDC* DC, // draw the lines - wxPoint start_contour_pos = GetCornerPosition(0); + wxPoint start_contour_pos = GetCornerPosition(0); for( int ic = 0; ic < GetNumCorners(); ic++ ) { int xi = GetCornerPosition(ic).x; @@ -347,27 +347,27 @@ void ZONE_CONTAINER::DrawWhileCreateOutline( WinEDA_DrawPanel* panel, wxDC* DC, int xf, yf; if( m_Poly->corner[ic].end_contour == FALSE && ic < GetNumCorners() - 1 ) { - is_close_segment = false; + is_close_segment = false; xf = GetCornerPosition(ic + 1).x; yf = GetCornerPosition(ic + 1).y; - if ( (m_Poly->corner[ic + 1].end_contour) || (ic == GetNumCorners() - 2) ) - current_gr_mode = GR_XOR; - else - current_gr_mode = draw_mode; + if ( (m_Poly->corner[ic + 1].end_contour) || (ic == GetNumCorners() - 2) ) + current_gr_mode = GR_XOR; + else + current_gr_mode = draw_mode; } else { - is_close_segment = true; - current_gr_mode = GR_XOR; + is_close_segment = true; + current_gr_mode = GR_XOR; xf = start_contour_pos.x; yf = start_contour_pos.y; start_contour_pos = GetCornerPosition(ic + 1); } - GRSetDrawMode( DC, current_gr_mode ); - if ( is_close_segment ) - GRLine( &panel->m_ClipBox, DC, xi, yi, xf, yf, 0, WHITE ); - else - GRLine( &panel->m_ClipBox, DC, xi, yi, xf, yf, 0, color ); + GRSetDrawMode( DC, current_gr_mode ); + if ( is_close_segment ) + GRLine( &panel->m_ClipBox, DC, xi, yi, xf, yf, 0, WHITE ); + else + GRLine( &panel->m_ClipBox, DC, xi, yi, xf, yf, 0, color ); } } @@ -514,6 +514,10 @@ void ZONE_CONTAINER::Display_Infos( WinEDA_DrawFrame* frame ) wxString msg; int text_pos; + BOARD* board = (BOARD*) m_Parent; + + wxASSERT( board ); + frame->MsgPanel->EraseMsgBox(); msg = _( "Zone Outline" ); @@ -551,7 +555,7 @@ void ZONE_CONTAINER::Display_Infos( WinEDA_DrawFrame* frame ) Affiche_1_Parametre( frame, text_pos, _( "NetCode" ), msg, RED ); text_pos += 8; - msg = ReturnPcbLayerName( m_Layer ); + msg = board->GetLayerName( m_Layer ); Affiche_1_Parametre( frame, text_pos, _( "Layer" ), msg, BROWN ); text_pos += 8; @@ -588,19 +592,19 @@ void ZONE_CONTAINER::Move( const wxPoint& offset ) */ void ZONE_CONTAINER::MoveEdge( const wxPoint& offset ) { - int ii = m_CornerSelection; + int ii = m_CornerSelection; - // Move the start point of the selected edge: + // Move the start point of the selected edge: SetCornerPosition(ii, GetCornerPosition(ii) + offset); - // Move the end point of the selected edge: - if ( m_Poly->corner[ii].end_contour || ii == GetNumCorners() - 1) - { - int icont = m_Poly->GetContour( ii ); - ii = m_Poly->GetContourStart( icont ); - } - else - ii++; + // Move the end point of the selected edge: + if ( m_Poly->corner[ii].end_contour || ii == GetNumCorners() - 1) + { + int icont = m_Poly->GetContour( ii ); + ii = m_Poly->GetContourStart( icont ); + } + else + ii++; SetCornerPosition(ii, GetCornerPosition(ii) + offset); m_Poly->Hatch(); diff --git a/pcbnew/classpcb.cpp b/pcbnew/classpcb.cpp index d8e81befcf..6882523bf7 100644 --- a/pcbnew/classpcb.cpp +++ b/pcbnew/classpcb.cpp @@ -156,6 +156,7 @@ EDA_BoardDesignSettings::EDA_BoardDesignSettings() m_MicroViaDrill = 50; // micro via drill (for the entire board) m_CurrentMicroViaSize = 150; // Current micro via size m_MicroViasAllowed = false; // true to allow micro vias + for( ii = 0; ii < HISTORY_NUMBER; ii++ ) { m_TrackWidthHistory[ii] = 0; // Last HISTORY_NUMBER used track widths @@ -171,6 +172,7 @@ EDA_BoardDesignSettings::EDA_BoardDesignSettings() m_MaskMargin = 150; // Solder mask margin /* Color options for screen display of the Printed Board: */ m_PcbGridColor = DARKGRAY; // Grid color + for( ii = 0; ii < 32; ii++ ) m_LayerColor[ii] = default_layer_color[ii]; @@ -179,6 +181,7 @@ EDA_BoardDesignSettings::EDA_BoardDesignSettings() m_ViaColor[VIA_MICROVIA] = CYAN; m_ViaColor[VIA_BLIND_BURIED] = BROWN; m_ViaColor[VIA_THROUGH] = WHITE; + m_ModuleTextCMPColor = LIGHTGRAY; // Text module color for modules on the COMPONENT layer m_ModuleTextCUColor = MAGENTA; // Text module color for modules on the COPPER layer m_ModuleTextNOVColor = DARKGRAY; // Text module color for "invisible" texts (must be BLACK if really not displayed) diff --git a/pcbnew/cotation.cpp b/pcbnew/cotation.cpp index c5dae505e2..11c718c32b 100644 --- a/pcbnew/cotation.cpp +++ b/pcbnew/cotation.cpp @@ -22,12 +22,12 @@ static int status_cotation; /* = 0 : pas de cotation en cours /* * Les routines generent une cotation de la forme * - cote usuelle: - * + * | | | dist | |<---------->| | | - * + * */ #define MAX_CHAR 40 /* longueur maxi de la cotation */ @@ -135,10 +135,10 @@ WinEDA_CotationPropertiesFrame::WinEDA_CotationPropertiesFrame( WinEDA_PcbFrame* m_SelLayerBox = new WinEDAChoiceBox( this, ID_TEXTPCB_SELECT_LAYER, wxDefaultPosition, wxDefaultSize ); LeftBoxSizer->Add( m_SelLayerBox, 0, wxGROW | wxLEFT | wxRIGHT | wxBOTTOM, 5 ); - int ii; - for( ii = FIRST_NO_COPPER_LAYER; ii < NB_LAYERS; ii++ ) + + for( int layer = FIRST_NO_COPPER_LAYER; layerAppend( ReturnPcbLayerName( ii ) ); + m_SelLayerBox->Append( parent->m_Pcb->GetLayerName( layer ) ); } m_SelLayerBox->SetSelection( Cotation->GetLayer() - FIRST_NO_COPPER_LAYER ); @@ -174,8 +174,8 @@ void WinEDA_CotationPropertiesFrame::OnOkClick( wxCommandEvent& event ) CurrentCotation->m_Text->m_Width = CurrentCotation->m_Width = m_TxtWidthCtrl->GetValue(); CurrentCotation->m_Text->m_Miroir = (m_Mirror->GetSelection() == 0) ? 1 : 0; - - CurrentCotation->SetLayer( m_SelLayerBox->GetChoice() + FIRST_NO_COPPER_LAYER ); + + CurrentCotation->SetLayer( m_SelLayerBox->GetChoice() + FIRST_NO_COPPER_LAYER ); CurrentCotation->m_Text->SetLayer( m_SelLayerBox->GetChoice() + FIRST_NO_COPPER_LAYER ); CurrentCotation->m_Text->CreateDrawData(); @@ -213,7 +213,7 @@ static void Exit_EditCotation( WinEDA_DrawPanel* Panel, wxDC* DC ) status_cotation = 0; Panel->ManageCurseur = NULL; Panel->ForceCloseManageCurseur = NULL; - ((WinEDA_PcbFrame*)Panel->m_Parent)->SetCurItem(NULL); + ((WinEDA_PcbFrame*)Panel->m_Parent)->SetCurItem(NULL); } diff --git a/pcbnew/cross-probing.cpp b/pcbnew/cross-probing.cpp index 799b260475..241ed18f6f 100644 --- a/pcbnew/cross-probing.cpp +++ b/pcbnew/cross-probing.cpp @@ -48,7 +48,7 @@ void RemoteCommand( const char* cmdline ) { modName = CONV_FROM_UTF8( text ); - module = ReturnModule( frame->m_Pcb, modName ); + module = frame->m_Pcb->FindModuleByReference( modName ); if( module ) msg.Printf( _( "%s found" ), modName.GetData() ); @@ -86,9 +86,9 @@ void RemoteCommand( const char* cmdline ) modName = CONV_FROM_UTF8( text ); - module = ReturnModule( frame->m_Pcb, modName ); + module = frame->m_Pcb->FindModuleByReference( modName ); if( module ) - pad = ReturnPad( module, pinName ); + pad = module->FindPadByName( pinName ); if( pad ) netcode = pad->GetNet(); diff --git a/pcbnew/dialog_zones_by_polygon.cpp b/pcbnew/dialog_zones_by_polygon.cpp index 1001f547cb..1d802e16c5 100644 --- a/pcbnew/dialog_zones_by_polygon.cpp +++ b/pcbnew/dialog_zones_by_polygon.cpp @@ -68,7 +68,7 @@ WinEDA_ZoneFrame::WinEDA_ZoneFrame() WinEDA_ZoneFrame::WinEDA_ZoneFrame( WinEDA_PcbFrame* parent, - ZONE_CONTAINER * zone_container, + ZONE_CONTAINER * zone_container, wxWindowID id, const wxString& caption, const wxPoint& pos, @@ -76,14 +76,14 @@ WinEDA_ZoneFrame::WinEDA_ZoneFrame( WinEDA_PcbFrame* parent, long style ) { m_Parent = parent; - m_Zone_Container = zone_container; - if( m_Parent->m_Parent->m_EDA_Config ) + m_Zone_Container = zone_container; + if( m_Parent->m_Parent->m_EDA_Config ) { m_NetSorting = m_Parent->m_Parent->m_EDA_Config->Read( ZONE_NET_SORT_OPTION_KEY, (long) BOARD::PAD_CNT_SORT ); - } + } Create( parent, id, caption, pos, size, style ); - SetReturnCode(ZONE_ABORT); // Will be changed on buttons click + SetReturnCode(ZONE_ABORT); // Will be changed on buttons click } @@ -110,7 +110,7 @@ bool WinEDA_ZoneFrame::Create( wxWindow* parent, m_ListNetNameSelection = NULL; m_LayerSelectionCtrl = NULL; ////@end WinEDA_ZoneFrame member initialisation - + ////@begin WinEDA_ZoneFrame creation SetExtraStyle(wxWS_EX_BLOCK_EVENTS); wxDialog::Create( parent, id, caption, pos, size, style ); @@ -133,6 +133,8 @@ bool WinEDA_ZoneFrame::Create( wxWindow* parent, void WinEDA_ZoneFrame::CreateControls() { + BOARD* board = m_Parent->m_Pcb; + SetFont( *g_DialogFont ); ////@begin WinEDA_ZoneFrame content construction @@ -244,8 +246,8 @@ void WinEDA_ZoneFrame::CreateControls() m_NetSortingOption->SetValidator( wxGenericValidator(& m_NetSorting) ); ////@end WinEDA_ZoneFrame content construction - // Initialise options - wxString title = _( "Zone clearance value:" ) + ReturnUnitSymbol( g_UnitMetric ); + // Initialise options + wxString title = _( "Zone clearance value:" ) + ReturnUnitSymbol( g_UnitMetric ); m_ClearanceValueTitle->SetLabel( title ); title = _( "Grid :" ) + ReturnUnitSymbol( g_UnitMetric );; @@ -280,89 +282,97 @@ void WinEDA_ZoneFrame::CreateControls() { case ZONE_CONTAINER::PAD_NOT_IN_ZONE: // Pads are not covered m_FillOpt->SetSelection( 2 ); - break; - case ZONE_CONTAINER::THERMAL_PAD: // Use thermal relief for pads + break; + case ZONE_CONTAINER::THERMAL_PAD: // Use thermal relief for pads m_FillOpt->SetSelection( 1 ); - break; - case ZONE_CONTAINER::PAD_IN_ZONE: // pads are covered by copper + break; + case ZONE_CONTAINER::PAD_IN_ZONE: // pads are covered by copper m_FillOpt->SetSelection( 0 ); - break; - } + break; + } - if ( m_Zone_Container ) - s_Zone_Hatching = m_Zone_Container->m_Poly->GetHatchStyle(); - else + if ( m_Zone_Container ) + s_Zone_Hatching = m_Zone_Container->m_Poly->GetHatchStyle(); + else s_Zone_Hatching = m_Parent->m_Parent->m_EDA_Config->Read( ZONE_NET_OUTLINES_HATCH_OPTION_KEY, - (long) CPolyLine::DIAGONAL_EDGE ); + (long) CPolyLine::DIAGONAL_EDGE ); switch( s_Zone_Hatching ) { - case CPolyLine::NO_HATCH: - m_OutlineAppearanceCtrl->SetSelection(0); - break; + case CPolyLine::NO_HATCH: + m_OutlineAppearanceCtrl->SetSelection(0); + break; - case CPolyLine::DIAGONAL_EDGE: - m_OutlineAppearanceCtrl->SetSelection(1); - break; + case CPolyLine::DIAGONAL_EDGE: + m_OutlineAppearanceCtrl->SetSelection(1); + break; - case CPolyLine::DIAGONAL_FULL: - m_OutlineAppearanceCtrl->SetSelection(2); - break; - } + case CPolyLine::DIAGONAL_FULL: + m_OutlineAppearanceCtrl->SetSelection(2); + break; + } - int layer_cnt = g_DesignSettings.m_CopperLayerCount; - for( int ii = 0; ii < g_DesignSettings.m_CopperLayerCount; ii++ ) + int layer_cnt = board->GetCopperLayerCount(); + for( int ii = 0; ii < board->GetCopperLayerCount(); ii++ ) { wxString msg; int layer_number = COPPER_LAYER_N; + if( layer_cnt == 0 || ii < layer_cnt - 1 ) layer_number = ii; - else if( ii == layer_cnt - 1 ) + else if( ii == layer_cnt - 1 ) layer_number = LAYER_CMP_N; + m_LayerId[ii] = layer_number; - msg = ReturnPcbLayerName( layer_number ).Trim(); + + msg = board->GetLayerName( layer_number ).Trim(); m_LayerSelectionCtrl->InsertItems( 1, &msg, ii ); - if ( m_Zone_Container ) - { - if( m_Zone_Container->GetLayer() == layer_number ) - m_LayerSelectionCtrl->SetSelection( ii ); - } - else - { - if( ((PCB_SCREEN*)(m_Parent->GetScreen()))->m_Active_Layer == layer_number ) - m_LayerSelectionCtrl->SetSelection( ii ); - } + + if( m_Zone_Container ) + { + if( m_Zone_Container->GetLayer() == layer_number ) + m_LayerSelectionCtrl->SetSelection( ii ); + } + else + { + if( ((PCB_SCREEN*)(m_Parent->GetScreen()))->m_Active_Layer == layer_number ) + m_LayerSelectionCtrl->SetSelection( ii ); + } } - m_NetSortingOption->SetSelection(m_NetSorting == BOARD::ALPHA_SORT ? 0 : 1 ); - wxString NetNameFilter; - if( m_Parent->m_Parent->m_EDA_Config ) + m_NetSortingOption->SetSelection(m_NetSorting == BOARD::ALPHA_SORT ? 0 : 1 ); + + wxString NetNameFilter; + if( m_Parent->m_Parent->m_EDA_Config ) { - NetNameFilter = m_Parent->m_Parent->m_EDA_Config->Read( ZONE_NET_FILTER_STRING_KEY, wxT("N_0*") ); - } - m_NetNameFilter->SetValue(NetNameFilter); + NetNameFilter = m_Parent->m_Parent->m_EDA_Config->Read( ZONE_NET_FILTER_STRING_KEY, wxT("N_0*") ); + } + + m_NetNameFilter->SetValue(NetNameFilter); wxArrayString ListNetName; m_Parent->m_Pcb->ReturnSortedNetnamesList( ListNetName, - m_NetSorting == 0 ? BOARD::ALPHA_SORT : BOARD::PAD_CNT_SORT ); - if ( m_NetSorting != 0 ) - { - wxString Filter = m_NetNameFilter->GetValue(); - for (unsigned ii = 0; ii < ListNetName.GetCount(); ii ++ ) - { - if ( ListNetName[ii].Matches(Filter.GetData() ) ) - { - ListNetName. RemoveAt(ii); - ii--; - } - } - } - + m_NetSorting == 0 ? BOARD::ALPHA_SORT : BOARD::PAD_CNT_SORT ); + + if ( m_NetSorting != 0 ) + { + wxString Filter = m_NetNameFilter->GetValue(); + for( unsigned ii = 0; ii < ListNetName.GetCount(); ii++ ) + { + if( ListNetName[ii].Matches(Filter.GetData() ) ) + { + ListNetName. RemoveAt(ii); + ii--; + } + } + } + m_ListNetNameSelection->InsertItems( ListNetName, 0 ); // Select net: - int net_select = g_HightLigth_NetCode; - if ( m_Zone_Container ) - net_select = m_Zone_Container->GetNet(); + int net_select = g_HightLigth_NetCode; + if( m_Zone_Container ) + net_select = m_Zone_Container->GetNet(); + if( net_select > 0 ) { EQUIPOT* equipot = m_Parent->m_Pcb->FindNet( net_select ); @@ -468,8 +478,8 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors) if( m_Parent->m_Parent->m_EDA_Config ) { - m_Parent->m_Parent->m_EDA_Config->Write( ZONE_NET_OUTLINES_HATCH_OPTION_KEY, (long)s_Zone_Hatching); - } + m_Parent->m_Parent->m_EDA_Config->Write( ZONE_NET_OUTLINES_HATCH_OPTION_KEY, (long)s_Zone_Hatching); + } switch( m_GridCtrl->GetSelection() ) { @@ -481,7 +491,7 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors) g_GridRoutingSize = 50; break; - default: + default: case 2: g_GridRoutingSize = 100; break; @@ -521,7 +531,7 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors) /* Search net_code for this net */ EQUIPOT* net; s_NetcodeSelection = 0; - for( net = m_Parent->m_Pcb->m_Equipots; net; net = net->Next() ) + for( net = m_Parent->m_Pcb->m_Equipots; net; net = net->Next() ) { if( net->m_Netname == net_name ) { @@ -529,8 +539,8 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors) break; } } - - return true; + + return true; } @@ -541,29 +551,28 @@ bool WinEDA_ZoneFrame::AcceptOptions(bool aPromptForErrors) void WinEDA_ZoneFrame::OnNetSortingOptionSelected( wxCommandEvent& event ) { wxArrayString ListNetName; - m_NetSorting = m_NetSortingOption->GetSelection(); + m_NetSorting = m_NetSortingOption->GetSelection(); m_Parent->m_Pcb->ReturnSortedNetnamesList( ListNetName, - m_NetSorting == 0 ? BOARD::ALPHA_SORT : BOARD::PAD_CNT_SORT ); - if ( m_NetSorting != 0 ) - { - wxString Filter = m_NetNameFilter->GetValue(); - for (unsigned ii = 0; ii < ListNetName.GetCount(); ii ++ ) - { - if ( ListNetName[ii].Matches(Filter.GetData() ) ) - { - ListNetName. RemoveAt(ii); - ii--; - } - } - } - m_ListNetNameSelection->Clear(); + m_NetSorting == 0 ? BOARD::ALPHA_SORT : BOARD::PAD_CNT_SORT ); + if ( m_NetSorting != 0 ) + { + wxString Filter = m_NetNameFilter->GetValue(); + for (unsigned ii = 0; ii < ListNetName.GetCount(); ii ++ ) + { + if ( ListNetName[ii].Matches(Filter.GetData() ) ) + { + ListNetName. RemoveAt(ii); + ii--; + } + } + } + m_ListNetNameSelection->Clear(); m_ListNetNameSelection->InsertItems( ListNetName, 0 ); if( m_Parent->m_Parent->m_EDA_Config ) { m_Parent->m_Parent->m_EDA_Config->Write( ZONE_NET_SORT_OPTION_KEY, (long) m_NetSorting ); m_Parent->m_Parent->m_EDA_Config->Write( ZONE_NET_FILTER_STRING_KEY, m_NetNameFilter->GetValue() ); - } - + } } @@ -573,7 +582,7 @@ void WinEDA_ZoneFrame::OnNetSortingOptionSelected( wxCommandEvent& event ) void WinEDA_ZoneFrame::OnOkClick( wxCommandEvent& event ) { - if ( AcceptOptions(true) ) - EndModal( ZONE_OK ); + if ( AcceptOptions(true) ) + EndModal( ZONE_OK ); } diff --git a/pcbnew/editedge.cpp b/pcbnew/editedge.cpp index 97be6bdf0c..fdc190cfdf 100644 --- a/pcbnew/editedge.cpp +++ b/pcbnew/editedge.cpp @@ -174,7 +174,7 @@ void WinEDA_PcbFrame::Delete_Drawings_All_Layer( DRAWSEGMENT* Segment, wxDC* DC return; } - wxString msg = _( "Delete Layer " ) + ReturnPcbLayerName( layer ); + wxString msg = _( "Delete Layer " ) + m_Pcb->GetLayerName( layer ); if( !IsOK( this, msg ) ) return; diff --git a/pcbnew/initpcb.cpp b/pcbnew/initpcb.cpp index f7bb1ed804..ad3d47aa7f 100644 --- a/pcbnew/initpcb.cpp +++ b/pcbnew/initpcb.cpp @@ -127,26 +127,9 @@ bool WinEDA_BasePcbFrame::Clear_Pcb( bool query ) } } - /* Suppression des listes chainees */ - m_Pcb->m_Equipots->DeleteStructList(); - m_Pcb->m_Equipots = NULL; - - m_Pcb->m_Drawings->DeleteStructList(); - m_Pcb->m_Drawings = NULL; - - m_Pcb->m_Modules->DeleteStructList(); - m_Pcb->m_Modules = NULL; - - m_Pcb->m_Track->DeleteStructList(); - m_Pcb->m_Track = NULL; - m_Pcb->m_NbSegmTrack = 0; - - m_Pcb->m_Zone->DeleteStructList(); - m_Pcb->m_Zone = NULL; - m_Pcb->m_NbSegmZone = 0; - - m_Pcb->DeleteMARKERs(); - m_Pcb->DeleteZONEOutlines(); + // delete the old BOARD and create a new BOARD so that the default + // layer names are put into the BOARD. + SetBOARD( new BOARD( NULL, this ) ); for( ; g_UnDeleteStackPtr != 0; ) { @@ -159,30 +142,6 @@ bool WinEDA_BasePcbFrame::Clear_Pcb( bool query ) memset( buf_work, 0, BUFMEMSIZE ); adr_lowmem = adr_max = buf_work; - if( m_Pcb->m_Pads ) - { - MyFree( m_Pcb->m_Pads ); - m_Pcb->m_Pads = NULL; - } - if( m_Pcb->m_Ratsnest ) - MyFree( m_Pcb->m_Ratsnest ); - if( m_Pcb->m_LocalRatsnest ) - MyFree( m_Pcb->m_LocalRatsnest ); - m_Pcb->m_Ratsnest = NULL; - m_Pcb->m_LocalRatsnest = NULL; - - /* remise a 0 ou a une valeur initiale des variables de la structure */ - m_Pcb->m_BoundaryBox.SetOrigin( wxPoint( 0, 0 ) ); - m_Pcb->m_BoundaryBox.SetSize( wxSize( 0, 0 ) ); - m_Pcb->m_Status_Pcb = 0; - m_Pcb->m_NbLoclinks = 0; - m_Pcb->m_NbLinks = 0; - m_Pcb->m_NbPads = 0; - m_Pcb->m_NbNets = 0; - m_Pcb->m_NbNodes = 0; - m_Pcb->m_NbNoconnect = 0; - m_Pcb->m_NbSegmTrack = 0; - m_Pcb->m_NbSegmZone = 0; SetCurItem( NULL ); /* Init parametres de gestion */ @@ -219,8 +178,8 @@ void WinEDA_PcbFrame::Erase_Zones( bool query ) m_Pcb->m_Zone = NULL; m_Pcb->m_NbSegmZone = 0; } - - m_Pcb->DeleteZONEOutlines(); + + m_Pcb->DeleteZONEOutlines(); GetScreen()->SetModify(); } @@ -291,10 +250,10 @@ void WinEDA_PcbFrame::Erase_Pistes( wxDC * DC, int masque_type, bool query ) for( pt_segm = m_Pcb->m_Track; pt_segm != NULL; pt_segm = (TRACK*) PtNext ) { PtNext = (TRACK*) pt_segm->Pnext; - + if( pt_segm->GetState( SEGM_FIXE | SEGM_AR ) & masque_type ) continue; - + pt_segm->DeleteStructure(); } diff --git a/pcbnew/ioascii.cpp b/pcbnew/ioascii.cpp index f0ef418dc5..543b10a40f 100644 --- a/pcbnew/ioascii.cpp +++ b/pcbnew/ioascii.cpp @@ -308,11 +308,25 @@ int WinEDA_BasePcbFrame::ReadSetup( FILE* File, int* LineNum ) if( strncmp( Line, "Layer[", LAYERKEYZ ) == 0 ) { - const char* cp = Line + LAYERKEYZ; + // parse: + // Layer[n] "a Layer name" + + char* cp = Line + LAYERKEYZ; int layer = atoi(cp); - wxString layerName = CONV_FROM_UTF8( data ); - m_Pcb->SetLayerName( layer, layerName ); + if( data ) + { + wxString layerName = CONV_FROM_UTF8( data ); + m_Pcb->SetLayerName( layer, layerName ); + + data = strtok( NULL, " " ); + + if( data ) + { + LAYER_T type = LAYER::ParseType( data ); + m_Pcb->SetLayerType( layer, type ); + } + } continue; } @@ -500,13 +514,9 @@ int WinEDA_BasePcbFrame::ReadSetup( FILE* File, int* LineNum ) #ifdef PCBNEW -/***************************************************************/ -static int WriteSetup( FILE* aFile, WinEDA_BasePcbFrame* aFrame -#if defined(DEBUG) - , BOARD* aBoard -#endif - ) -/***************************************************************/ +/******************************************************************************/ +static int WriteSetup( FILE* aFile, WinEDA_BasePcbFrame* aFrame, BOARD* aBoard ) +/******************************************************************************/ { char text[1024]; int ii, jj; @@ -533,18 +543,14 @@ static int WriteSetup( FILE* aFile, WinEDA_BasePcbFrame* aFrame fprintf( aFile, "ZoneGridSize %d\n", g_GridRoutingSize ); - -#if defined(DEBUG) fprintf( aFile, "Layers %d\n", aBoard->GetCopperLayerCount() ); for( int layer=0; layerGetCopperLayerCount(); ++layer ) { - fprintf( aFile, "Layer[%d] %s\n", layer, CONV_TO_UTF8( aBoard->GetLayerName(layer) ) ); + fprintf( aFile, "Layer[%d] %s %s\n", layer, + CONV_TO_UTF8( aBoard->GetLayerName(layer) ), + LAYER::ShowType( aBoard->GetLayerType( layer ) ) ); } -#else - fprintf( aFile, "Layers %d\n", g_DesignSettings.m_CopperLayerCount ); -#endif - fprintf( aFile, "TrackWidth %d\n", g_DesignSettings.m_CurrentTrackWidth ); for( ii = 0; ii < HISTORY_NUMBER; ii++ ) { @@ -1057,11 +1063,7 @@ int WinEDA_PcbFrame::SavePcbFormatAscii( FILE* aFile ) WriteGeneralDescrPcb( aFile ); WriteSheetDescr( m_CurrentScreen, aFile ); - WriteSetup( aFile, this -#if defined(DEBUG) - , m_Pcb -#endif - ); + WriteSetup( aFile, this, m_Pcb ); rc = m_Pcb->Save( aFile ); diff --git a/pcbnew/locate.cpp b/pcbnew/locate.cpp index c55fb19a29..2cf28412fd 100644 --- a/pcbnew/locate.cpp +++ b/pcbnew/locate.cpp @@ -10,15 +10,15 @@ #include "protos.h" - + /** * Function RefPos * returns the reference position, coming from either the mouse position or the - * the cursor position, based on whether the typeloc has the CURSEUR_OFF_GRILLE + * the cursor position, based on whether the typeloc has the CURSEUR_OFF_GRILLE * flag ORed in or not. * @param typeloc int with possible CURSEUR_OFF_GRILLE bit on. - * @return wxPoint - The reference point, either the mouse position or + * @return wxPoint - The reference point, either the mouse position or * the cursor position. */ wxPoint inline RefPos( int typeloc ) @@ -27,55 +27,6 @@ wxPoint inline RefPos( int typeloc ) } -/*************************************************************/ -MODULE* ReturnModule( BOARD* pcb, const wxString& reference ) -/*************************************************************/ - -/* - * Recherche d'un module par sa reference - * Retourne: - * un pointeur sur le module - * Null si pas localis� - */ -{ - MODULE* Module = pcb->m_Modules; - - for( ; Module != NULL; Module = (MODULE*) Module->Pnext ) - { - if( reference.CmpNoCase( Module->m_Reference->m_Text ) == 0 ) - return Module; - } - - return NULL; -} - - -/********************************************************/ -D_PAD* ReturnPad( MODULE* module, const wxString& name ) -/********************************************************/ - -/* Recherche d'un pad par son nom, pour le module Module - */ -{ - D_PAD* pt_pad; - wxString buf; - - if( module == NULL ) - return NULL; - - pt_pad = module->m_Pads; - - for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext ) - { - pt_pad->ReturnStringPadName( buf ); - if( buf.CmpNoCase( name ) == 0 ) - return pt_pad; - } - - return NULL; -} - - /*******************************************************************/ TRACK* Locate_Via( BOARD* Pcb, const wxPoint& pos, int layer ) /*******************************************************************/ @@ -156,7 +107,7 @@ D_PAD* Locate_Pad_Connecte( BOARD* Pcb, TRACK* ptr_piste, int extr ) wxPoint ref_pos; int masque_layer = g_TabOneLayerMask[ptr_piste->GetLayer()]; - + if( extr == START ) { ref_pos = ptr_piste->m_Start; @@ -165,7 +116,7 @@ D_PAD* Locate_Pad_Connecte( BOARD* Pcb, TRACK* ptr_piste, int extr ) { ref_pos = ptr_piste->m_End; } - + for( MODULE* module = Pcb->m_Modules; module; module = module->Next() ) { ptr_pad = Locate_Pads( module, ref_pos, masque_layer ); @@ -192,7 +143,7 @@ D_PAD* Locate_Pad_Connecte( BOARD* Pcb, TRACK* ptr_piste, int extr ) * pointeur sur la description de la pastille si localisation * pointeur NULL si pastille non trouvee * num_empr = numero d'empreinte du pad - * + * * la priorit� est donn�e a la couche active */ @@ -210,7 +161,7 @@ D_PAD* Locate_Any_Pad( BOARD* Pcb, const wxPoint& ref_pos, bool OnlyCurrentLayer for( MODULE* module=Pcb->m_Modules; module; module = module->Next() ) { D_PAD* pt_pad; - + /* First: Search a pad on the active layer: */ if( ( pt_pad = Locate_Pads( module, ref_pos, layer_mask ) ) != NULL ) return pt_pad; @@ -272,7 +223,7 @@ D_PAD* Locate_Pads( MODULE* module, const wxPoint& ref_pos, int masque_layer ) * The current mouse or cursor coordinates are grabbed from the active window * to performe hit-testing. * distance is calculated via manhattan distance from the center of the bounding rectangle - * to the cursor postition. + * to the cursor postition. * * @param Pcb The BOARD to search within. * @param typeloc Flag bits, tuning the search, see pcbnew.h @@ -313,26 +264,26 @@ MODULE* Locate_Prefered_Module( BOARD* Pcb, int typeloc ) else if( layer==ADHESIVE_N_CMP || layer==SILKSCREEN_N_CMP ) layer = CMP_N; - + /* Localisation: test des dimensions minimales, choix du meilleur candidat */ /* calcul des dimensions du cadre :*/ - int offx = pt_module->m_BoundaryBox.m_Size.x/2 + - pt_module->m_BoundaryBox.m_Pos.x + - pt_module->m_Pos.x; - int offy = pt_module->m_BoundaryBox.m_Size.y/2 - + pt_module->m_BoundaryBox.m_Pos.y - + pt_module->m_Pos.y; - //off x & offy point to the middle of the box. - int dist = abs(ref_pos.x - offx) + abs(ref_pos.y - offy); - lx = pt_module->m_BoundaryBox.GetWidth(); - ly = pt_module->m_BoundaryBox.GetHeight(); - //int dist = MIN(lx, ly); // to pick the smallest module (kinda screwy with same-sized modules -- this is bad!) - + int offx = pt_module->m_BoundaryBox.m_Size.x/2 + + pt_module->m_BoundaryBox.m_Pos.x + + pt_module->m_Pos.x; + int offy = pt_module->m_BoundaryBox.m_Size.y/2 + + pt_module->m_BoundaryBox.m_Pos.y + + pt_module->m_Pos.y; + //off x & offy point to the middle of the box. + int dist = abs(ref_pos.x - offx) + abs(ref_pos.y - offy); + lx = pt_module->m_BoundaryBox.GetWidth(); + ly = pt_module->m_BoundaryBox.GetHeight(); + //int dist = MIN(lx, ly); // to pick the smallest module (kinda screwy with same-sized modules -- this is bad!) + if( ( (PCB_SCREEN*) ActiveScreen )->m_Active_Layer == layer ){ if( dist <= min_dim ){ /* meilleure empreinte localisee sur couche active */ - module = pt_module; + module = pt_module; min_dim = dist; } } @@ -370,17 +321,17 @@ Currently in test (currently rasnest algos work only if p1 == p2) */ { #if 0 // Do not change it: does not work -{ +{ int dist; - dist = abs(p1.x - p2.x) + abs (p1.y - p2.y); - dist *= 7; - dist /= 10; - if ( dist < max_dist ) return true; + dist = abs(p1.x - p2.x) + abs (p1.y - p2.y); + dist *= 7; + dist /= 10; + if ( dist < max_dist ) return true; } #else - if ( p1 == p2 ) return true; + if ( p1 == p2 ) return true; #endif - return false; + return false; } /**************************************************************/ @@ -392,7 +343,7 @@ TRACK* Locate_Piste_Connectee( TRACK* PtRefSegm, TRACK* pt_base, * if extr == START, the starting track segment PtRefSegm is used to locate a connected segment * if extr == END, the ending track segment PtRefSegm is used * The test connection consider only end track segments - * + * * Search is made from pt_base to pt_lim (in the track linked list) * if pt_lim == NULL, the search is made from pt_base to the end of list * @@ -406,12 +357,12 @@ TRACK* Locate_Piste_Connectee( TRACK* PtRefSegm, TRACK* pt_base, * @param extr = START or END = end of ref track segment to use in tests */ { - #define NEIGHTBOUR_COUNT_MAX 50 + #define NEIGHTBOUR_COUNT_MAX 50 TRACK* PtSegmB, * PtSegmN; int Reflayer; wxPoint pos_ref; int ii; - int max_dist; + int max_dist; if( extr == START ) pos_ref = PtRefSegm->m_Start; @@ -435,8 +386,8 @@ TRACK* Locate_Piste_Connectee( TRACK* PtRefSegm, TRACK* pt_base, if( PtSegmN == PtRefSegm ) goto suite; - /* max_dist is the max distance between 2 tack ends which ensure a copper continuty */ - max_dist = (PtSegmN->m_Width + PtRefSegm->m_Width)/2; + /* max_dist is the max distance between 2 tack ends which ensure a copper continuty */ + max_dist = (PtSegmN->m_Width + PtRefSegm->m_Width)/2; if( IsPointsAreNear(pos_ref, PtSegmN->m_Start, max_dist) ) { /* Test des couches */ @@ -463,7 +414,7 @@ suite: if( PtSegmB == PtRefSegm ) goto suite1; - max_dist = (PtSegmB->m_Width + PtRefSegm->m_Width)/2; + max_dist = (PtSegmB->m_Width + PtRefSegm->m_Width)/2; if( IsPointsAreNear(pos_ref, PtSegmB->m_Start, max_dist) ) { /* Test des couches */ @@ -503,7 +454,7 @@ suite1: } - max_dist = (PtSegmN->m_Width + PtRefSegm->m_Width)/2; + max_dist = (PtSegmN->m_Width + PtRefSegm->m_Width)/2; if( IsPointsAreNear(pos_ref,PtSegmN->m_Start, max_dist) ) { /* Test des couches */ @@ -534,7 +485,7 @@ suite1: * 1 - routine de localisation du segment de piste pointe par la souris. * 2 - routine de localisation du segment de piste pointe par le point * ref_pos.x , ref_pos.y.r - * + * * La recherche commence a l'adresse start_adresse */ @@ -552,7 +503,7 @@ TRACK* Locate_Pistes( TRACK* start_adresse, const wxPoint& ref_pos, int MasqueLa { if( Track->GetState( BUSY | DELETED ) ) continue; - + if( (g_DesignSettings.m_LayerColor[Track->GetLayer()] & ITEM_NOT_SHOW) ) continue; @@ -566,12 +517,12 @@ TRACK* Locate_Pistes( TRACK* start_adresse, const wxPoint& ref_pos, int MasqueLa if( MasqueLayer != -1 ) if( (g_TabOneLayerMask[Track->GetLayer()] & MasqueLayer) == 0 ) continue; /* Segments sur couches differentes */ - + if( Track->HitTest( ref_pos ) ) return Track; } } - + return NULL; } @@ -587,9 +538,9 @@ TRACK* Locate_Pistes( TRACK* start_adresse, const wxPoint& ref_pos, int MasqueLa * 1 - routine de localisation du segment de zone pointe par la souris. * 2 - routine de localisation du segment de zone pointe par le point * ref_pos.x , ref_pos.y.r - * + * * Si layer == -1 , le tst de la couche n'est pas fait - * + * * La recherche commence a l'adresse start_adresse */ TRACK* Locate_Zone( TRACK* start_adresse, int layer, int typeloc ) @@ -606,7 +557,7 @@ TRACK* Locate_Zone( TRACK* start_adresse, const wxPoint& ref_pos, int layer ) { if( (layer != -1) && (Zone->GetLayer() != layer) ) continue; - + if( Zone->HitTest( ref_pos ) ) return Zone; } @@ -624,7 +575,7 @@ D_PAD* Fast_Locate_Pad_Connecte( BOARD* Pcb, const wxPoint& ref_pos, int masque_ * sur la couche indiquee par masque_layer (bit a bit) * ( extremite de piste ) * La liste des pads doit deja exister. - * + * * retourne : * NULL si pas de pad localise. * pointeur sur la structure descr_pad correspondante si pad trouve @@ -673,14 +624,14 @@ TRACK* Fast_Locate_Piste( TRACK* start_adr, TRACK* end_adr, if( PtSegm->GetState( DELETED | BUSY ) == 0 ) { if( ref_pos == PtSegm->m_Start ) - { + { /* Test des couches */ if( MaskLayer & PtSegm->ReturnMaskLayer() ) return PtSegm; } if( ref_pos == PtSegm->m_End ) - { + { /* Test des couches */ if( MaskLayer & PtSegm->ReturnMaskLayer() ) return PtSegm; @@ -715,7 +666,7 @@ TRACK* Fast_Locate_Via( TRACK* start_adr, TRACK* end_adr, if( pos == PtSegm->m_Start ) { if( PtSegm->GetState( BUSY | DELETED ) == 0 ) - { + { /* Test des couches */ if( MaskLayer & PtSegm->ReturnMaskLayer() ) return PtSegm; diff --git a/pcbnew/pcbframe.cpp b/pcbnew/pcbframe.cpp index 95451cbd4e..1943da15e5 100644 --- a/pcbnew/pcbframe.cpp +++ b/pcbnew/pcbframe.cpp @@ -20,33 +20,33 @@ BEGIN_EVENT_TABLE( WinEDA_PcbFrame, WinEDA_BasePcbFrame ) - COMMON_EVENTS_DRAWFRAME + COMMON_EVENTS_DRAWFRAME EVT_SOCKET( ID_EDA_SOCKET_EVENT_SERV, WinEDA_PcbFrame::OnSockRequestServer ) EVT_SOCKET( ID_EDA_SOCKET_EVENT, WinEDA_PcbFrame::OnSockRequest ) - + EVT_KICAD_CHOICEBOX( ID_ON_ZOOM_SELECT, WinEDA_PcbFrame::OnSelectZoom ) EVT_KICAD_CHOICEBOX( ID_ON_GRID_SELECT, WinEDA_PcbFrame::OnSelectGrid ) - + EVT_CLOSE( WinEDA_PcbFrame::OnCloseWindow ) EVT_SIZE( WinEDA_PcbFrame::OnSize ) - + EVT_TOOL_RANGE( ID_ZOOM_IN_BUTT, ID_ZOOM_PAGE_BUTT, WinEDA_PcbFrame::Process_Zoom ) - + EVT_TOOL( ID_LOAD_FILE, WinEDA_PcbFrame::Files_io ) EVT_TOOL( ID_MENU_READ_LAST_SAVED_VERSION_BOARD, WinEDA_PcbFrame::Files_io ) EVT_TOOL( ID_MENU_RECOVER_BOARD, WinEDA_PcbFrame::Files_io ) EVT_TOOL( ID_NEW_BOARD, WinEDA_PcbFrame::Files_io ) EVT_TOOL( ID_SAVE_BOARD, WinEDA_PcbFrame::Files_io ) EVT_TOOL( ID_OPEN_MODULE_EDITOR, WinEDA_PcbFrame::Process_Special_Functions ) - + EVT_MENU_RANGE( ID_PREFERENCES_FONT_INFOSCREEN, ID_PREFERENCES_FONT_END, WinEDA_DrawFrame::ProcessFontPreferences ) - + // Menu Files: - + EVT_MENU( ID_MAIN_MENUBAR, WinEDA_PcbFrame::Process_Special_Functions ) - + EVT_MENU( ID_MENU_LOAD_FILE, WinEDA_PcbFrame::Files_io ) EVT_MENU( ID_MENU_NEW_BOARD, WinEDA_PcbFrame::Files_io ) EVT_MENU( ID_MENU_SAVE_BOARD, WinEDA_PcbFrame::Files_io ) @@ -55,22 +55,22 @@ BEGIN_EVENT_TABLE( WinEDA_PcbFrame, WinEDA_BasePcbFrame ) EVT_MENU( ID_GEN_PLOT, WinEDA_PcbFrame::ToPlotter ) EVT_MENU_RANGE( ID_LOAD_FILE_1, ID_LOAD_FILE_10, WinEDA_PcbFrame::Files_io ) - + EVT_MENU( ID_GEN_EXPORT_SPECCTRA, WinEDA_PcbFrame::ExportToSpecctra ) EVT_MENU( ID_GEN_EXPORT_FILE_GENCADFORMAT, WinEDA_PcbFrame::ExportToGenCAD ) EVT_MENU( ID_GEN_EXPORT_FILE_MODULE_REPORT, WinEDA_PcbFrame::GenModuleReport ) - + EVT_MENU( ID_GEN_IMPORT_SPECCTRA_SESSION, WinEDA_PcbFrame::ImportSpecctraSession ) EVT_MENU( ID_GEN_IMPORT_SPECCTRA_DESIGN, WinEDA_PcbFrame::ImportSpecctraDesign ) EVT_MENU( ID_MENU_ARCHIVE_NEW_MODULES, WinEDA_PcbFrame::Process_Special_Functions ) EVT_MENU( ID_MENU_ARCHIVE_ALL_MODULES, WinEDA_PcbFrame::Process_Special_Functions ) - + EVT_MENU( ID_EXIT, WinEDA_PcbFrame::Process_Special_Functions ) - + // menu Config - EVT_MENU_RANGE(ID_CONFIG_AND_PREFERENCES_START, ID_CONFIG_AND_PREFERENCES_END, - WinEDA_PcbFrame::Process_Config) + EVT_MENU_RANGE(ID_CONFIG_AND_PREFERENCES_START, ID_CONFIG_AND_PREFERENCES_END, + WinEDA_PcbFrame::Process_Config) EVT_MENU( ID_COLORS_SETUP, WinEDA_PcbFrame::Process_Config ) EVT_MENU( ID_OPTIONS_SETUP, WinEDA_PcbFrame::Process_Config ) @@ -81,29 +81,29 @@ BEGIN_EVENT_TABLE( WinEDA_PcbFrame, WinEDA_BasePcbFrame ) EVT_MENU( ID_CONFIG_SAVE, WinEDA_PcbFrame::Process_Config ) EVT_MENU( ID_CONFIG_READ, WinEDA_PcbFrame::Process_Config ) - EVT_MENU( ID_PCB_USER_GRID_SETUP, WinEDA_PcbFrame::Process_Special_Functions ) - + EVT_MENU( ID_PCB_USER_GRID_SETUP, WinEDA_PcbFrame::Process_Special_Functions ) + EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, WinEDA_DrawFrame::SetLanguage ) - + // menu Postprocess EVT_MENU( ID_PCB_GEN_POS_MODULES_FILE, WinEDA_PcbFrame::GenModulesPosition ) EVT_MENU( ID_PCB_GEN_DRILL_FILE, WinEDA_PcbFrame::InstallDrillFrame ) EVT_MENU( ID_PCB_GEN_CMP_FILE, WinEDA_PcbFrame::Files_io ) - + // menu Miscellaneous EVT_MENU( ID_MENU_LIST_NETS, WinEDA_PcbFrame::Liste_Equipot ) EVT_MENU( ID_PCB_GLOBAL_DELETE, WinEDA_PcbFrame::Process_Special_Functions ) EVT_MENU( ID_MENU_PCB_CLEAN, WinEDA_PcbFrame::Process_Special_Functions ) EVT_MENU( ID_MENU_PCB_SWAP_LAYERS, WinEDA_PcbFrame::Process_Special_Functions ) - + // Menu Help EVT_MENU( ID_GENERAL_HELP, WinEDA_DrawFrame::GetKicadHelp ) EVT_MENU( ID_KICAD_ABOUT, WinEDA_DrawFrame::GetKicadAbout ) - + // Menu 3D Frame EVT_MENU( ID_MENU_PCB_SHOW_3D_FRAME, WinEDA_PcbFrame::Show3D_Frame ) - + // Horizontal toolbar EVT_TOOL( ID_TO_LIBRARY, WinEDA_PcbFrame::Process_Special_Functions ) EVT_TOOL( ID_SHEET_SET, WinEDA_DrawFrame::Process_PageSettings ) @@ -126,11 +126,11 @@ BEGIN_EVENT_TABLE( WinEDA_PcbFrame, WinEDA_BasePcbFrame ) WinEDA_PcbFrame::Process_Special_Functions ) EVT_TOOL( ID_TOOLBARH_PCB_AUTOPLACE, WinEDA_PcbFrame::AutoPlace ) EVT_TOOL( ID_TOOLBARH_PCB_AUTOROUTE, WinEDA_PcbFrame::AutoPlace ) - + // Option toolbar EVT_TOOL_RANGE( ID_TB_OPTIONS_START, ID_TB_OPTIONS_END, WinEDA_PcbFrame::OnSelectOptionToolbar ) - + // Vertical toolbar: EVT_TOOL( ID_NO_SELECT_BUTT, WinEDA_PcbFrame::Process_Special_Functions ) EVT_TOOL( ID_PCB_HIGHLIGHT_BUTT, WinEDA_PcbFrame::Process_Special_Functions ) @@ -146,24 +146,24 @@ BEGIN_EVENT_TABLE( WinEDA_PcbFrame, WinEDA_BasePcbFrame ) EVT_TOOL( ID_PCB_DELETE_ITEM_BUTT, WinEDA_PcbFrame::Process_Special_Functions ) EVT_TOOL( ID_PCB_SHOW_1_RATSNEST_BUTT, WinEDA_PcbFrame::Process_Special_Functions ) EVT_TOOL( ID_PCB_PLACE_OFFSET_COORD_BUTT, WinEDA_PcbFrame::Process_Special_Functions ) - + EVT_TOOL_RANGE( ID_PCB_MUWAVE_START_CMD, ID_PCB_MUWAVE_END_CMD, WinEDA_PcbFrame::ProcessMuWaveFunctions ) - + EVT_TOOL_RCLICKED( ID_TRACK_BUTT, WinEDA_PcbFrame::ToolOnRightClick ) EVT_TOOL_RCLICKED( ID_PCB_CIRCLE_BUTT, WinEDA_PcbFrame::ToolOnRightClick ) EVT_TOOL_RCLICKED( ID_PCB_ARC_BUTT, WinEDA_PcbFrame::ToolOnRightClick ) EVT_TOOL_RCLICKED( ID_TEXT_COMMENT_BUTT, WinEDA_PcbFrame::ToolOnRightClick ) EVT_TOOL_RCLICKED( ID_LINE_COMMENT_BUTT, WinEDA_PcbFrame::ToolOnRightClick ) EVT_TOOL_RCLICKED( ID_PCB_COTATION_BUTT, WinEDA_PcbFrame::ToolOnRightClick ) - + EVT_MENU_RANGE( ID_POPUP_PCB_AUTOPLACE_START_RANGE, ID_POPUP_PCB_AUTOPLACE_END_RANGE, WinEDA_PcbFrame::AutoPlace ) - + EVT_MENU_RANGE( ID_POPUP_PCB_START_RANGE, ID_POPUP_PCB_END_RANGE, WinEDA_PcbFrame::Process_Special_Functions ) - + // Annulation de commande en cours EVT_MENU_RANGE( ID_POPUP_GENERAL_START_RANGE, ID_POPUP_GENERAL_END_RANGE, WinEDA_PcbFrame::Process_Special_Functions ) @@ -183,7 +183,7 @@ END_EVENT_TABLE() WinEDA_PcbFrame::WinEDA_PcbFrame( wxWindow* father, WinEDA_App* parent, const wxString& title, const wxPoint& pos, const wxSize& size, - long style) : + long style) : WinEDA_BasePcbFrame( father, parent, PCB_FRAME, title, pos, size, style ) { m_FrameName = wxT( "PcbFrame" ); @@ -200,7 +200,9 @@ WinEDA_PcbFrame::WinEDA_PcbFrame( wxWindow* father, WinEDA_App* parent, m_SelViaSizeBox_Changed = FALSE; m_drc = new DRC( this ); // these 2 objects point to each other - + + SetBOARD( new BOARD( NULL, this ) ); + m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill; m_DisplayPadFill = DisplayOpt.DisplayPadFill; m_DisplayPadNum = DisplayOpt.DisplayPadNum; @@ -221,7 +223,7 @@ WinEDA_PcbFrame::WinEDA_PcbFrame( wxWindow* father, WinEDA_App* parent, if( m_Parent && m_Parent->m_EDA_Config ) { long SizeX, SizeY; - + if( m_Parent->m_EDA_Config->Read( wxT( "PcbEditGrid_X" ), &SizeX ) && m_Parent->m_EDA_Config->Read( wxT( "PcbEditGrid_Y" ), &SizeY ) ) { @@ -247,6 +249,7 @@ WinEDA_PcbFrame::~WinEDA_PcbFrame() m_Parent->m_PcbFrame = NULL; m_CurrentScreen = ScreenPcb; delete m_drc; + delete m_Pcb; } @@ -382,7 +385,7 @@ void WinEDA_PcbFrame::SetToolbars() DisplayOpt.DisplayPolarCood ); m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_POLAR_COORD, DisplayOpt.DisplayPolarCood ? - _( "Polar Coords not show" ) : + _( "Polar Coords not show" ) : _( "Display Polar Coords" ) ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_GRID, @@ -396,27 +399,27 @@ void WinEDA_PcbFrame::SetToolbars() m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_RATSNEST, g_Show_Ratsnest ); m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_RATSNEST, - g_Show_Ratsnest ? + g_Show_Ratsnest ? _( "General ratsnest not show" ) : _( "Show General ratsnest" ) ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_MODULE_RATSNEST, g_Show_Module_Ratsnest ); m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_RATSNEST, - g_Show_Module_Ratsnest ? - _( "Module ratsnest not show" ) : + g_Show_Module_Ratsnest ? + _( "Module ratsnest not show" ) : _( "Show Module ratsnest" ) ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_AUTO_DEL_TRACK, g_AutoDeleteOldTrack ); - + m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_AUTO_DEL_TRACK, g_AutoDeleteOldTrack ? - _( "Disable Auto Delete old Track" ) : + _( "Disable Auto Delete old Track" ) : _( "Enable Auto Delete old Track" ) ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_ZONES, DisplayOpt.DisplayZones ); - + m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_ZONES, DisplayOpt.DisplayZones ? _( "Do not Show Zones" ) : _( "Show Zones" ) ); @@ -431,7 +434,7 @@ void WinEDA_PcbFrame::SetToolbars() m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_TRACKS_SKETCH, !m_DisplayPcbTrackFill ); m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_TRACKS_SKETCH, - m_DisplayPcbTrackFill ? + m_DisplayPcbTrackFill ? _( "Show Tracks Sketch mode" ) : _( "Show Tracks filled mode" ) ); @@ -453,12 +456,12 @@ void WinEDA_PcbFrame::SetToolbars() m_SelTrackWidthBox_Changed = FALSE; m_SelTrackWidthBox->Clear(); wxString format = _( "Track" ); - + if( g_UnitMetric == INCHES ) format += wxT( " %.1f" ); else format += wxT( " %.3f" ); - + for( ii = 0; ii < HISTORY_NUMBER; ii++ ) { if( g_DesignSettings.m_TrackWidthHistory[ii] == 0 ) @@ -471,9 +474,9 @@ void WinEDA_PcbFrame::SetToolbars() msg.Printf( format.GetData(), value * 1000 ); else msg.Printf( format.GetData(), value ); - + m_SelTrackWidthBox->Append( msg ); - + if( g_DesignSettings.m_TrackWidthHistory[ii] == g_DesignSettings.m_CurrentTrackWidth ) m_SelTrackWidthBox->SetSelection( ii ); @@ -485,17 +488,17 @@ void WinEDA_PcbFrame::SetToolbars() m_SelViaSizeBox_Changed = FALSE; m_SelViaSizeBox->Clear(); wxString format = _( "Via" ); - + if( g_UnitMetric == INCHES ) format += wxT( " %.1f" ); else format += wxT( " %.3f" ); - + for( ii = 0; ii < HISTORY_NUMBER; ii++ ) { if( g_DesignSettings.m_ViaSizeHistory[ii] == 0 ) break; // Fin de liste - + double value = To_User_Unit( g_UnitMetric, g_DesignSettings.m_ViaSizeHistory[ii], PCB_INTERNAL_UNIT ); @@ -504,7 +507,7 @@ void WinEDA_PcbFrame::SetToolbars() msg.Printf( format.GetData(), value * 1000 ); else msg.Printf( format.GetData(), value ); - + m_SelViaSizeBox->Append( msg ); if( g_DesignSettings.m_ViaSizeHistory[ii] == g_DesignSettings.m_CurrentViaSize ) m_SelViaSizeBox->SetSelection( ii ); @@ -516,7 +519,7 @@ void WinEDA_PcbFrame::SetToolbars() int old_choice = m_SelZoomBox->GetChoice(); int new_choice = 1; int zoom; - + for( jj = 1, zoom = 1; zoom <= m_ZoomMaxValue; zoom <<= 1, jj++ ) { if( m_CurrentScreen && (m_CurrentScreen->GetZoom() == zoom) ) @@ -531,7 +534,7 @@ void WinEDA_PcbFrame::SetToolbars() if( m_SelGridBox && m_CurrentScreen ) { int kk = m_SelGridBox->GetChoice(); - + for( ii = 0; g_GridList[ii].x > 0; ii++ ) { if( !m_CurrentScreen->m_UserGridIsON diff --git a/pcbnew/pcbnew.cpp b/pcbnew/pcbnew.cpp index b992dbc1f5..bda296217f 100644 --- a/pcbnew/pcbnew.cpp +++ b/pcbnew/pcbnew.cpp @@ -75,7 +75,6 @@ bool WinEDA_App::OnInit() wxString Title = g_Main_Title + wxT( " " ) + GetBuildVersion(); m_PcbFrame->SetTitle( Title ); ActiveScreen = ScreenPcb; - m_PcbFrame->m_Pcb = new BOARD( NULL, m_PcbFrame ); SetTopWindow( m_PcbFrame ); m_PcbFrame->Show( TRUE ); diff --git a/pcbnew/pcbplot.cpp b/pcbnew/pcbplot.cpp index d71503a27d..09210ceb4c 100644 --- a/pcbnew/pcbplot.cpp +++ b/pcbnew/pcbplot.cpp @@ -1,6 +1,6 @@ - /***********************/ - /* fichier pcbplot.cpp */ - /***********************/ +/***********************/ +/* fichier pcbplot.cpp */ +/***********************/ #include "fctsys.h" #include "gr_basic.h" @@ -14,101 +14,101 @@ #include "protos.h" -#define PLOT_DEFAULT_MARGE 300 // mils +#define PLOT_DEFAULT_MARGE 300 // mils /* Keywords to r/w options in config */ -#define EDGELAYER_GERBER_OPT_KEY wxT("EdgeLayerGerberOpt") -#define PLOT_XFINESCALE_ADJ_KEY wxT("PlotXFineScaleAdj") -#define PLOT_YFINESCALE_ADJ_KEY wxT("PlotYFineScaleAdj") +#define EDGELAYER_GERBER_OPT_KEY wxT( "EdgeLayerGerberOpt" ) +#define PLOT_XFINESCALE_ADJ_KEY wxT( "PlotXFineScaleAdj" ) +#define PLOT_YFINESCALE_ADJ_KEY wxT( "PlotYFineScaleAdj" ) // variables locale : static long s_SelectedLayers = CUIVRE_LAYER | CMP_LAYER | - SILKSCREEN_LAYER_CMP | SILKSCREEN_LAYER_CU; + SILKSCREEN_LAYER_CMP | SILKSCREEN_LAYER_CU; static bool s_PlotOriginIsAuxAxis = FALSE; // Routines Locales -enum id_plotps -{ - ID_CLOSE_PLOT = 8020, - ID_DRILL_SHAPE_OPT, - ID_SCALE_OPT, - ID_ROTATE_OPT, - ID_MIROR_OPT, - ID_EXEC_PLOT, - ID_PLOT_MODE_OPT, - ID_MASKVIA_OPT, - ID_PLOT_CENTRE_OPT, - ID_SEL_PLOT_FORMAT, - ID_SEL_GERBER_FORMAT, - ID_SAVE_OPT_PLOT, - ID_EXCLUDE_EDGES_PCB, - ID_PRINT_REF, - ID_PRINT_VALUE, - ID_PRINT_MODULE_TEXTS, - ID_FORCE_PRINT_INVISIBLE_TEXT, - ID_PRINT_PAD_ON_SILKSCREEN, - ID_FORCE_PRINT_PAD, - ID_CREATE_DRILL_FILE, - ID_SEL_PLOT_OFFSET_OPTION +enum id_plotps { + ID_CLOSE_PLOT = 8020, + ID_DRILL_SHAPE_OPT, + ID_SCALE_OPT, + ID_ROTATE_OPT, + ID_MIROR_OPT, + ID_EXEC_PLOT, + ID_PLOT_MODE_OPT, + ID_MASKVIA_OPT, + ID_PLOT_CENTRE_OPT, + ID_SEL_PLOT_FORMAT, + ID_SEL_GERBER_FORMAT, + ID_SAVE_OPT_PLOT, + ID_EXCLUDE_EDGES_PCB, + ID_PRINT_REF, + ID_PRINT_VALUE, + ID_PRINT_MODULE_TEXTS, + ID_FORCE_PRINT_INVISIBLE_TEXT, + ID_PRINT_PAD_ON_SILKSCREEN, + ID_FORCE_PRINT_PAD, + ID_CREATE_DRILL_FILE, + ID_SEL_PLOT_OFFSET_OPTION }; - /*******************************/ - /* Dialog box for plot control */ - /*******************************/ +/*******************************/ +/* Dialog box for plot control */ +/*******************************/ -class WinEDA_PlotFrame: public wxDialog +class WinEDA_PlotFrame : public wxDialog { public: - WinEDA_BasePcbFrame * m_Parent; - wxButton * m_MergePlotButton; - wxCheckBox * m_BoxSelecLayer[32]; - wxRadioBox * m_PlotFormatOpt; - wxRadioBox * m_Choice_Plot_Offset; - wxRadioBox * m_Drill_Shape_Opt; - wxRadioBox * m_Scale_Opt; - wxRadioBox * m_PlotModeOpt; - wxCheckBox * m_PlotMirorOpt; - wxCheckBox * m_PlotNoViaOnMaskOpt; - wxCheckBox * m_HPGL_PlotCenter_Opt; - wxCheckBox * m_Exclude_Edges_Pcb; - wxCheckBox * m_Plot_Sheet_Ref; - wxCheckBox * m_Plot_Invisible_Text; - wxCheckBox * m_Plot_Text_Value; - wxCheckBox * m_Plot_Text_Ref; - wxCheckBox * m_Plot_Text_Div; - wxCheckBox * m_Plot_Pads_on_Silkscreen; - wxCheckBox * m_Force_Plot_Pads; - wxCheckBox * m_Plot_PS_Negative; - WinEDA_ValueCtrl * m_GerbSpotSizeMinOpt; - WinEDA_ValueCtrl * m_LinesWidth; - WinEDA_ValueCtrl * m_HPGLPenSizeOpt; - WinEDA_ValueCtrl * m_HPGLPenSpeedOpt; - WinEDA_ValueCtrl * m_HPGLPenOverlayOpt; - WinEDA_DFloatValueCtrl * m_FineAdjustXscaleOpt, * m_FineAdjustYscaleOpt; - double m_XScaleAdjust, m_YScaleAdjust; - int m_PlotFormat; + WinEDA_BasePcbFrame* m_Parent; + wxButton* m_MergePlotButton; + wxCheckBox* m_BoxSelecLayer[32]; + wxRadioBox* m_PlotFormatOpt; + wxRadioBox* m_Choice_Plot_Offset; + wxRadioBox* m_Drill_Shape_Opt; + wxRadioBox* m_Scale_Opt; + wxRadioBox* m_PlotModeOpt; + wxCheckBox* m_PlotMirorOpt; + wxCheckBox* m_PlotNoViaOnMaskOpt; + wxCheckBox* m_HPGL_PlotCenter_Opt; + wxCheckBox* m_Exclude_Edges_Pcb; + wxCheckBox* m_Plot_Sheet_Ref; + wxCheckBox* m_Plot_Invisible_Text; + wxCheckBox* m_Plot_Text_Value; + wxCheckBox* m_Plot_Text_Ref; + wxCheckBox* m_Plot_Text_Div; + wxCheckBox* m_Plot_Pads_on_Silkscreen; + wxCheckBox* m_Force_Plot_Pads; + wxCheckBox* m_Plot_PS_Negative; + WinEDA_ValueCtrl* m_GerbSpotSizeMinOpt; + WinEDA_ValueCtrl* m_LinesWidth; + WinEDA_ValueCtrl* m_HPGLPenSizeOpt; + WinEDA_ValueCtrl* m_HPGLPenSpeedOpt; + WinEDA_ValueCtrl* m_HPGLPenOverlayOpt; + WinEDA_DFloatValueCtrl* m_FineAdjustXscaleOpt, * m_FineAdjustYscaleOpt; + double m_XScaleAdjust, m_YScaleAdjust; + int m_PlotFormat; public: - WinEDA_PlotFrame(WinEDA_BasePcbFrame * parent); + WinEDA_PlotFrame( WinEDA_BasePcbFrame * parent ); private: - void Plot(wxCommandEvent & event); - void OnQuit(wxCommandEvent & event); - void OnClose(wxCloseEvent & event); - void SetCommands(wxCommandEvent & event); - void SaveOptPlot(wxCommandEvent & event); - void CreateDrillFile(wxCommandEvent & event); - DECLARE_EVENT_TABLE() + void Plot( wxCommandEvent& event ); + void OnQuit( wxCommandEvent& event ); + void OnClose( wxCloseEvent& event ); + void SetCommands( wxCommandEvent& event ); + void SaveOptPlot( wxCommandEvent& event ); + void CreateDrillFile( wxCommandEvent& event ); + + DECLARE_EVENT_TABLE() }; -BEGIN_EVENT_TABLE(WinEDA_PlotFrame, wxDialog) - EVT_CLOSE(WinEDA_PlotFrame::OnClose) - EVT_BUTTON(ID_CLOSE_PLOT, WinEDA_PlotFrame::OnQuit) - EVT_BUTTON(ID_EXEC_PLOT, WinEDA_PlotFrame::Plot) - EVT_BUTTON(ID_SAVE_OPT_PLOT, WinEDA_PlotFrame::SaveOptPlot) - EVT_BUTTON(ID_CREATE_DRILL_FILE, WinEDA_PlotFrame::CreateDrillFile) - EVT_RADIOBOX(ID_SEL_PLOT_FORMAT, WinEDA_PlotFrame::SetCommands) +BEGIN_EVENT_TABLE( WinEDA_PlotFrame, wxDialog ) + EVT_CLOSE( WinEDA_PlotFrame::OnClose ) + EVT_BUTTON( ID_CLOSE_PLOT, WinEDA_PlotFrame::OnQuit ) + EVT_BUTTON( ID_EXEC_PLOT, WinEDA_PlotFrame::Plot ) + EVT_BUTTON( ID_SAVE_OPT_PLOT, WinEDA_PlotFrame::SaveOptPlot ) + EVT_BUTTON( ID_CREATE_DRILL_FILE, WinEDA_PlotFrame::CreateDrillFile ) + EVT_RADIOBOX( ID_SEL_PLOT_FORMAT, WinEDA_PlotFrame::SetCommands ) END_EVENT_TABLE() @@ -116,507 +116,573 @@ const int UNITS_MILS = 1000; /********************************************************************/ -WinEDA_PlotFrame::WinEDA_PlotFrame(WinEDA_BasePcbFrame * parent): - wxDialog(parent, -1, _("Plot"), - wxPoint(-1,-1), wxDefaultSize, - wxDEFAULT_DIALOG_STYLE) +WinEDA_PlotFrame::WinEDA_PlotFrame( WinEDA_BasePcbFrame* parent ) : + wxDialog( parent, -1, _( "Plot" ), + wxPoint( -1, -1 ), wxDefaultSize, + wxDEFAULT_DIALOG_STYLE ) /********************************************************************/ { -wxButton * Button; -int ii; + wxButton* Button; + int ii; - m_Parent = parent; - SetFont(*g_DialogFont); - Centre(); - m_PlotFormat = format_plot; - m_Plot_Sheet_Ref = NULL; + m_Parent = parent; - wxBoxSizer * MainBoxSizer = new wxBoxSizer(wxHORIZONTAL); - SetSizer(MainBoxSizer); - wxBoxSizer * RightBoxSizer = new wxBoxSizer(wxVERTICAL); - wxBoxSizer * MidRightBoxSizer = new wxBoxSizer(wxVERTICAL); - wxBoxSizer * MidLeftBoxSizer = new wxBoxSizer(wxVERTICAL); - wxBoxSizer * LeftBoxSizer = new wxBoxSizer(wxVERTICAL); - MainBoxSizer->Add(LeftBoxSizer, 0, wxGROW|wxALL, 5); - MainBoxSizer->Add(MidLeftBoxSizer, 0, wxGROW|wxALL, 5); - MainBoxSizer->Add(MidRightBoxSizer, 0, wxGROW|wxALL, 5); - MainBoxSizer->Add(RightBoxSizer, 0, wxGROW|wxALL, 5); + BOARD* board = parent->m_Pcb; - wxBoxSizer * LayersBoxSizer = new wxBoxSizer(wxHORIZONTAL); - LeftBoxSizer->Add(LayersBoxSizer, 0, wxGROW|wxALL, 5); + SetFont( *g_DialogFont ); + Centre(); -wxString fmtmsg[4] = { wxT("HPGL"), wxT("Gerber"), wxT("Postscript"), wxT("Postscript A4") }; - m_PlotFormatOpt = new wxRadioBox(this, ID_SEL_PLOT_FORMAT, - _("Plot Format"), wxDefaultPosition, wxSize(-1,-1), - 4, fmtmsg, 1, wxRA_SPECIFY_COLS); - MidRightBoxSizer->Add(m_PlotFormatOpt, 0, wxGROW|wxALL, 5); - switch ( m_PlotFormat ) - { - case PLOT_FORMAT_HPGL: - m_PlotFormatOpt->SetSelection(0); - break; + m_PlotFormat = format_plot; + m_Plot_Sheet_Ref = NULL; - case PLOT_FORMAT_GERBER: - m_PlotFormatOpt->SetSelection(1); - break; + wxBoxSizer* MainBoxSizer = new wxBoxSizer( wxHORIZONTAL ); - default: // ( PLOT_FORMAT_POST or PLOT_FORMAT_POST_A4 ) - // As m_PlotFormat is never set to a value of PLOT_FORMAT_POST_A4, - // use the value of g_ForcePlotPS_On_A4 to determine whether the - // "Postscript" or "Postscipt A4" radiobutton had been selected - // previously (and thus which button should be reselected now). - if( g_ForcePlotPS_On_A4 ) - m_PlotFormatOpt->SetSelection(3); - else - m_PlotFormatOpt->SetSelection(2); - break; - } + SetSizer( MainBoxSizer ); + wxBoxSizer* RightBoxSizer = new wxBoxSizer( wxVERTICAL ); - // Creation des menus d'option du format GERBER - m_GerbSpotSizeMinOpt = new WinEDA_ValueCtrl(this, _("Spot min"), - spot_mini, g_UnitMetric, MidRightBoxSizer, UNITS_MILS); + wxBoxSizer* MidRightBoxSizer = new wxBoxSizer( wxVERTICAL ); - // Creation des menus d'option du format HPGL - m_HPGLPenSizeOpt = new WinEDA_ValueCtrl(this, _("Pen Size"), - g_HPGL_Pen_Diam, g_UnitMetric, MidRightBoxSizer, UNITS_MILS); + wxBoxSizer* MidLeftBoxSizer = new wxBoxSizer( wxVERTICAL ); - // unites standards = cm pour vitesse plume en HPGL - m_HPGLPenSpeedOpt = new WinEDA_ValueCtrl(this, _("Pen Speed (cm/s)"), - g_HPGL_Pen_Speed, CENTIMETRE, MidRightBoxSizer, 1); - m_HPGLPenSpeedOpt->SetToolTip(_("Set pen speed in cm/s")); + wxBoxSizer* LeftBoxSizer = new wxBoxSizer( wxVERTICAL ); - m_HPGLPenOverlayOpt = new WinEDA_ValueCtrl(this, _("Pen Ovr"), - g_HPGL_Pen_Recouvrement, g_UnitMetric, MidRightBoxSizer, UNITS_MILS); - m_HPGLPenOverlayOpt->SetToolTip(_("Set plot overlay for filling")); + MainBoxSizer->Add( LeftBoxSizer, 0, wxGROW | wxALL, 5 ); + MainBoxSizer->Add( MidLeftBoxSizer, 0, wxGROW | wxALL, 5 ); + MainBoxSizer->Add( MidRightBoxSizer, 0, wxGROW | wxALL, 5 ); + MainBoxSizer->Add( RightBoxSizer, 0, wxGROW | wxALL, 5 ); - m_LinesWidth = new WinEDA_ValueCtrl(this, _("Lines Width"), - g_PlotLine_Width, g_UnitMetric, MidRightBoxSizer, PCB_INTERNAL_UNIT); - m_LinesWidth->SetToolTip(_("Set width for lines in Line plot mode")); + wxBoxSizer* LayersBoxSizer = new wxBoxSizer( wxHORIZONTAL ); - // Create the right column commands -wxString choice_plot_offset_msg[] = - {_("Absolute"), _("Auxiliary axis")}; - m_Choice_Plot_Offset = new wxRadioBox(this, ID_SEL_PLOT_OFFSET_OPTION, - _("Plot Origin"), - wxDefaultPosition,wxSize(-1,-1), - 2,choice_plot_offset_msg,1,wxRA_SPECIFY_COLS); - if( s_PlotOriginIsAuxAxis ) - m_Choice_Plot_Offset->SetSelection(1); - RightBoxSizer->Add(m_Choice_Plot_Offset, 0, wxGROW|wxALL, 5); - /* Add a spacer for a better look */ - RightBoxSizer->Add(5, 5, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 20); + LeftBoxSizer->Add( LayersBoxSizer, 0, wxGROW | wxALL, 5 ); - /* Create the command buttons */ - Button = new wxButton(this, ID_EXEC_PLOT, _("Plot")); - Button->SetForegroundColour(*wxRED); - RightBoxSizer->Add(Button, 0, wxGROW|wxALL, 5); + static const wxString fmtmsg[4] = { + wxT( "HPGL" ), wxT( "Gerber" ), wxT( "Postscript" ), wxT( "Postscript A4" ) + }; - Button = new wxButton(this, ID_CLOSE_PLOT, _("Close")); - Button->SetForegroundColour(*wxBLUE); - RightBoxSizer->Add(Button, 0, wxGROW|wxALL, 5); + m_PlotFormatOpt = new wxRadioBox( this, ID_SEL_PLOT_FORMAT, + _( "Plot Format" ), wxDefaultPosition, wxSize( -1, -1 ), + 4, fmtmsg, 1, wxRA_SPECIFY_COLS ); - Button = new wxButton(this, ID_SAVE_OPT_PLOT, _("Save options")); - Button->SetForegroundColour(wxColour(0,80,0) ); - RightBoxSizer->Add(Button, 0, wxGROW|wxALL, 5); + MidRightBoxSizer->Add( m_PlotFormatOpt, 0, wxGROW | wxALL, 5 ); - Button = new wxButton(this, ID_CREATE_DRILL_FILE, _("Create Drill File")); - Button->SetForegroundColour(wxColour(0,80,80) ); - RightBoxSizer->Add(Button, 0, wxGROW|wxALL, 5); + switch( m_PlotFormat ) + { + case PLOT_FORMAT_HPGL: + m_PlotFormatOpt->SetSelection( 0 ); + break; - // Create scale adjust option - m_XScaleAdjust = m_YScaleAdjust = 1.0; - if( m_Parent->m_Parent->m_EDA_Config ) - { - m_Parent->m_Parent->m_EDA_Config->Read( EDGELAYER_GERBER_OPT_KEY, &g_Exclude_Edges_Pcb); - m_Parent->m_Parent->m_EDA_Config->Read( PLOT_XFINESCALE_ADJ_KEY, &m_XScaleAdjust); - m_Parent->m_Parent->m_EDA_Config->Read( PLOT_XFINESCALE_ADJ_KEY, &m_YScaleAdjust); - } - m_FineAdjustXscaleOpt = new WinEDA_DFloatValueCtrl(this, _("X Scale Adjust"), m_XScaleAdjust, RightBoxSizer); - m_FineAdjustXscaleOpt->SetToolTip(_("Set X scale adjust for exact scale plotting")); - m_FineAdjustYscaleOpt = new WinEDA_DFloatValueCtrl(this, _("Y Scale Adjust"), m_YScaleAdjust, RightBoxSizer); - m_FineAdjustYscaleOpt->SetToolTip(_("Set Y scale adjust for exact scale plotting")); + case PLOT_FORMAT_GERBER: + m_PlotFormatOpt->SetSelection( 1 ); + break; - m_Plot_PS_Negative = new wxCheckBox(this, -1, _("Plot Negative") ); - m_Plot_PS_Negative->SetValue(g_Plot_PS_Negative); - RightBoxSizer->Add(m_Plot_PS_Negative, 0, wxGROW|wxALL, 5); + default: // ( PLOT_FORMAT_POST or PLOT_FORMAT_POST_A4 ) + // As m_PlotFormat is never set to a value of PLOT_FORMAT_POST_A4, + // use the value of g_ForcePlotPS_On_A4 to determine whether the + // "Postscript" or "Postscipt A4" radiobutton had been selected + // previously (and thus which button should be reselected now). + if( g_ForcePlotPS_On_A4 ) + m_PlotFormatOpt->SetSelection( 3 ); + else + m_PlotFormatOpt->SetSelection( 2 ); + break; + } - // Creation de la liste des layers - int mask = 1; - wxBoxSizer * OneColonLayerBoxSizer = new wxBoxSizer(wxVERTICAL); - LayersBoxSizer->Add(OneColonLayerBoxSizer, 0, wxGROW|wxALL, 5); - for ( ii = 0; ii < NB_LAYERS; ii++, mask <<= 1 ) - { - if( ii == 16 ) - { - OneColonLayerBoxSizer = new wxBoxSizer(wxVERTICAL); - LayersBoxSizer->Add(OneColonLayerBoxSizer, 0, wxGROW|wxALL, 5); - } + // Creation des menus d'option du format GERBER + m_GerbSpotSizeMinOpt = new WinEDA_ValueCtrl( this, _( "Spot min" ), + spot_mini, g_UnitMetric, MidRightBoxSizer, + UNITS_MILS ); - m_BoxSelecLayer[ii] = new wxCheckBox(this, -1, ReturnPcbLayerName(ii)); - if( mask & s_SelectedLayers ) - m_BoxSelecLayer[ii]->SetValue(true); - OneColonLayerBoxSizer->Add(m_BoxSelecLayer[ii], 0, wxGROW|wxALL, 1); - } + // Creation des menus d'option du format HPGL + m_HPGLPenSizeOpt = new WinEDA_ValueCtrl( this, _( "Pen Size" ), + g_HPGL_Pen_Diam, g_UnitMetric, MidRightBoxSizer, + UNITS_MILS ); - // Option for excluding contents of "Edges Pcb" layer - - m_Exclude_Edges_Pcb = new wxCheckBox(this, - ID_EXCLUDE_EDGES_PCB, _("Exclude Edges Pcb Layer") ); - m_Exclude_Edges_Pcb->SetValue(g_Exclude_Edges_Pcb); - m_Exclude_Edges_Pcb->SetToolTip( - _("Exclude contents of Edges Pcb layer from all other layers") ); - LeftBoxSizer->Add(m_Exclude_Edges_Pcb, 0, wxGROW|wxALL, 1); + // unites standards = cm pour vitesse plume en HPGL + m_HPGLPenSpeedOpt = new WinEDA_ValueCtrl( this, _( "Pen Speed (cm/s)" ), + g_HPGL_Pen_Speed, CENTIMETRE, MidRightBoxSizer, + 1 ); - // Option d'impression du cartouche: - if( m_Parent->m_Print_Sheet_Ref ) - { - m_Plot_Sheet_Ref = new wxCheckBox(this, ID_PRINT_REF, _("Print Sheet Ref") ); - m_Plot_Sheet_Ref->SetValue(Plot_Sheet_Ref); - LeftBoxSizer->Add(m_Plot_Sheet_Ref, 0, wxGROW|wxALL, 1); - } - else - Plot_Sheet_Ref = false; + m_HPGLPenSpeedOpt->SetToolTip( _( "Set pen speed in cm/s" ) ); - // Option d'impression des pads sur toutes les couches - m_Plot_Pads_on_Silkscreen = new wxCheckBox(this, - ID_PRINT_PAD_ON_SILKSCREEN, _("Print Pads on Silkscreen") ); - m_Plot_Pads_on_Silkscreen->SetValue(PlotPadsOnSilkLayer); - m_Plot_Pads_on_Silkscreen->SetToolTip( - _("Enable/disable print/plot pads on Silkscreen layers") ); - LeftBoxSizer->Add(m_Plot_Pads_on_Silkscreen, 0, wxGROW|wxALL, 1); + m_HPGLPenOverlayOpt = new WinEDA_ValueCtrl( this, _( "Pen Ovr" ), + g_HPGL_Pen_Recouvrement, g_UnitMetric, + MidRightBoxSizer, UNITS_MILS ); - m_Force_Plot_Pads = new wxCheckBox(this, ID_FORCE_PRINT_PAD, - _("Always Print Pads") ); - m_Force_Plot_Pads->SetValue(Plot_Pads_All_Layers); - m_Force_Plot_Pads->SetToolTip(_("Force print/plot pads on ALL layers") ); - LeftBoxSizer->Add(m_Force_Plot_Pads, 0, wxGROW|wxALL, 1); + m_HPGLPenOverlayOpt->SetToolTip( _( "Set plot overlay for filling" ) ); - // Options d'impression des textes modules - m_Plot_Text_Value = new wxCheckBox(this, ID_PRINT_VALUE, _("Print Module Value") ); - m_Plot_Text_Value->SetValue(Sel_Texte_Valeur); - m_Plot_Text_Value->SetToolTip( - _("Enable/disable print/plot module value on Silkscreen layers") ); - LeftBoxSizer->Add(m_Plot_Text_Value, 0, wxGROW|wxALL, 1); + m_LinesWidth = new WinEDA_ValueCtrl( this, _( "Lines Width" ), + g_PlotLine_Width, g_UnitMetric, MidRightBoxSizer, + PCB_INTERNAL_UNIT ); - m_Plot_Text_Ref = new wxCheckBox(this, ID_PRINT_REF, _("Print Module Reference")); - m_Plot_Text_Ref->SetValue(Sel_Texte_Reference); - m_Plot_Text_Ref->SetToolTip( - _("Enable/disable print/plot module reference on Silkscreen layers") ); - LeftBoxSizer->Add(m_Plot_Text_Ref, 0, wxGROW|wxALL, 1); + m_LinesWidth->SetToolTip( _( "Set width for lines in Line plot mode" ) ); - m_Plot_Text_Div = new wxCheckBox(this, ID_PRINT_MODULE_TEXTS, - _("Print other Module texts") ); - m_Plot_Text_Div->SetValue(Sel_Texte_Divers); - m_Plot_Text_Div->SetToolTip( - _("Enable/disable print/plot module field texts on Silkscreen layers") ); - LeftBoxSizer->Add(m_Plot_Text_Div, 0, wxGROW|wxALL, 1); + // Create the right column commands + static const wxString choice_plot_offset_msg[] = + { _( "Absolute" ), _( "Auxiliary axis" ) }; - m_Plot_Invisible_Text = new wxCheckBox(this, - ID_FORCE_PRINT_INVISIBLE_TEXT, _("Force Print Invisible Texts") ); - m_Plot_Invisible_Text->SetValue(Sel_Texte_Invisible); - m_Plot_Invisible_Text->SetToolTip( - _("Force print/plot module invisible texts on Silkscreen layers") ); - LeftBoxSizer->Add(m_Plot_Invisible_Text, 0, wxGROW|wxALL, 1); + m_Choice_Plot_Offset = new wxRadioBox( this, ID_SEL_PLOT_OFFSET_OPTION, + _( "Plot Origin" ), + wxDefaultPosition, wxSize( -1, -1 ), + 2, choice_plot_offset_msg, 1, wxRA_SPECIFY_COLS ); + + if( s_PlotOriginIsAuxAxis ) + m_Choice_Plot_Offset->SetSelection( 1 ); + RightBoxSizer->Add( m_Choice_Plot_Offset, 0, wxGROW | wxALL, 5 ); + /* Add a spacer for a better look */ + RightBoxSizer->Add( 5, 5, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 20 ); + + /* Create the command buttons */ + Button = new wxButton( this, ID_EXEC_PLOT, _( "Plot" ) ); + + Button->SetForegroundColour( *wxRED ); + RightBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 ); + + Button = new wxButton( this, ID_CLOSE_PLOT, _( "Close" ) ); + + Button->SetForegroundColour( *wxBLUE ); + RightBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 ); + + Button = new wxButton( this, ID_SAVE_OPT_PLOT, _( "Save options" ) ); + + Button->SetForegroundColour( wxColour( 0, 80, 0 ) ); + RightBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 ); + + Button = new wxButton( this, ID_CREATE_DRILL_FILE, _( "Create Drill File" ) ); + + Button->SetForegroundColour( wxColour( 0, 80, 80 ) ); + RightBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 ); + + // Create scale adjust option + m_XScaleAdjust = m_YScaleAdjust = 1.0; + if( m_Parent->m_Parent->m_EDA_Config ) + { + m_Parent->m_Parent->m_EDA_Config->Read( EDGELAYER_GERBER_OPT_KEY, &g_Exclude_Edges_Pcb ); + m_Parent->m_Parent->m_EDA_Config->Read( PLOT_XFINESCALE_ADJ_KEY, &m_XScaleAdjust ); + m_Parent->m_Parent->m_EDA_Config->Read( PLOT_XFINESCALE_ADJ_KEY, &m_YScaleAdjust ); + } + m_FineAdjustXscaleOpt = new WinEDA_DFloatValueCtrl( this, _( + "X Scale Adjust" ), m_XScaleAdjust, + RightBoxSizer ); + + m_FineAdjustXscaleOpt->SetToolTip( _( "Set X scale adjust for exact scale plotting" ) ); + m_FineAdjustYscaleOpt = new WinEDA_DFloatValueCtrl( this, _( + "Y Scale Adjust" ), m_YScaleAdjust, + RightBoxSizer ); + + m_FineAdjustYscaleOpt->SetToolTip( _( "Set Y scale adjust for exact scale plotting" ) ); + + m_Plot_PS_Negative = new wxCheckBox( this, -1, _( "Plot Negative" ) ); + + m_Plot_PS_Negative->SetValue( g_Plot_PS_Negative ); + RightBoxSizer->Add( m_Plot_PS_Negative, 0, wxGROW | wxALL, 5 ); + + // Creation de la liste des layers + int mask = 1; + wxBoxSizer* OneColonLayerBoxSizer = new wxBoxSizer( wxVERTICAL ); + + LayersBoxSizer->Add( OneColonLayerBoxSizer, 0, wxGROW | wxALL, 5 ); + + for( ii = 0; ii < NB_LAYERS; ii++, mask <<= 1 ) + { + if( ii == 16 ) + { + OneColonLayerBoxSizer = new wxBoxSizer( wxVERTICAL ); + + LayersBoxSizer->Add( OneColonLayerBoxSizer, 0, wxGROW | wxALL, 5 ); + } + + m_BoxSelecLayer[ii] = new wxCheckBox( this, -1, board->GetLayerName (ii) ); + + if( mask & s_SelectedLayers ) + m_BoxSelecLayer[ii]->SetValue( true ); + OneColonLayerBoxSizer->Add( m_BoxSelecLayer[ii], 0, wxGROW | wxALL, 1 ); + } + + // Option for excluding contents of "Edges Pcb" layer + + m_Exclude_Edges_Pcb = new wxCheckBox( this, + ID_EXCLUDE_EDGES_PCB, _( "Exclude Edges Pcb Layer" ) ); + + m_Exclude_Edges_Pcb->SetValue( g_Exclude_Edges_Pcb ); + m_Exclude_Edges_Pcb->SetToolTip( + _( "Exclude contents of Edges Pcb layer from all other layers" ) ); + LeftBoxSizer->Add( m_Exclude_Edges_Pcb, 0, wxGROW | wxALL, 1 ); + + // Option d'impression du cartouche: + if( m_Parent->m_Print_Sheet_Ref ) + { + m_Plot_Sheet_Ref = new wxCheckBox( this, ID_PRINT_REF, _( "Print Sheet Ref" ) ); + + m_Plot_Sheet_Ref->SetValue( Plot_Sheet_Ref ); + LeftBoxSizer->Add( m_Plot_Sheet_Ref, 0, wxGROW | wxALL, 1 ); + } + else + Plot_Sheet_Ref = false; + + // Option d'impression des pads sur toutes les couches + m_Plot_Pads_on_Silkscreen = new wxCheckBox( this, + ID_PRINT_PAD_ON_SILKSCREEN, _( + "Print Pads on Silkscreen" ) ); + + m_Plot_Pads_on_Silkscreen->SetValue( PlotPadsOnSilkLayer ); + m_Plot_Pads_on_Silkscreen->SetToolTip( + _( "Enable/disable print/plot pads on Silkscreen layers" ) ); + LeftBoxSizer->Add( m_Plot_Pads_on_Silkscreen, 0, wxGROW | wxALL, 1 ); + + m_Force_Plot_Pads = new wxCheckBox( this, ID_FORCE_PRINT_PAD, + _( "Always Print Pads" ) ); + + m_Force_Plot_Pads->SetValue( Plot_Pads_All_Layers ); + m_Force_Plot_Pads->SetToolTip( _( "Force print/plot pads on ALL layers" ) ); + LeftBoxSizer->Add( m_Force_Plot_Pads, 0, wxGROW | wxALL, 1 ); + + // Options d'impression des textes modules + m_Plot_Text_Value = new wxCheckBox( this, ID_PRINT_VALUE, _( "Print Module Value" ) ); + + m_Plot_Text_Value->SetValue( Sel_Texte_Valeur ); + m_Plot_Text_Value->SetToolTip( + _( "Enable/disable print/plot module value on Silkscreen layers" ) ); + LeftBoxSizer->Add( m_Plot_Text_Value, 0, wxGROW | wxALL, 1 ); + + m_Plot_Text_Ref = new wxCheckBox( this, ID_PRINT_REF, _( "Print Module Reference" ) ); + + m_Plot_Text_Ref->SetValue( Sel_Texte_Reference ); + m_Plot_Text_Ref->SetToolTip( + _( "Enable/disable print/plot module reference on Silkscreen layers" ) ); + LeftBoxSizer->Add( m_Plot_Text_Ref, 0, wxGROW | wxALL, 1 ); + + m_Plot_Text_Div = new wxCheckBox( this, ID_PRINT_MODULE_TEXTS, + _( "Print other Module texts" ) ); + + m_Plot_Text_Div->SetValue( Sel_Texte_Divers ); + m_Plot_Text_Div->SetToolTip( + _( "Enable/disable print/plot module field texts on Silkscreen layers" ) ); + LeftBoxSizer->Add( m_Plot_Text_Div, 0, wxGROW | wxALL, 1 ); + + m_Plot_Invisible_Text = new wxCheckBox( this, + ID_FORCE_PRINT_INVISIBLE_TEXT, _( + "Force Print Invisible Texts" ) ); + + m_Plot_Invisible_Text->SetValue( Sel_Texte_Invisible ); + m_Plot_Invisible_Text->SetToolTip( + _( "Force print/plot module invisible texts on Silkscreen layers" ) ); + LeftBoxSizer->Add( m_Plot_Invisible_Text, 0, wxGROW | wxALL, 1 ); -wxString drillmsg[3] = { _("No Drill mark"), _("Small mark"), _("Real Drill") }; - m_Drill_Shape_Opt = new wxRadioBox(this, ID_DRILL_SHAPE_OPT, - _("Pads Drill Opt"), wxDefaultPosition, wxSize(-1,-1), - 3, drillmsg, 1, wxRA_SPECIFY_COLS); - m_Drill_Shape_Opt->SetSelection(g_DrillShapeOpt); - MidLeftBoxSizer->Add(m_Drill_Shape_Opt, 0, wxGROW|wxALL, 5); + static const wxString drillmsg[3] = { _( "No Drill mark" ), _( "Small mark" ), _( "Real Drill" ) }; + m_Drill_Shape_Opt = new wxRadioBox( this, ID_DRILL_SHAPE_OPT, + _( "Pads Drill Opt" ), wxDefaultPosition, wxSize( -1, -1 ), + 3, drillmsg, 1, wxRA_SPECIFY_COLS ); -wxString scalemsg[5] = - { _("Auto scale"), _("Scale 1"), _("Scale 1.5"), _("Scale 2"), _("Scale 3") }; - m_Scale_Opt = new wxRadioBox(this, ID_SCALE_OPT, - _("Scale Opt"), wxDefaultPosition, wxSize(-1,-1), - 5, scalemsg, 1, wxRA_SPECIFY_COLS); - m_Scale_Opt->SetSelection(g_PlotScaleOpt); - MidLeftBoxSizer->Add(m_Scale_Opt, 0, wxGROW|wxALL, 5); + m_Drill_Shape_Opt->SetSelection( g_DrillShapeOpt ); + MidLeftBoxSizer->Add( m_Drill_Shape_Opt, 0, wxGROW | wxALL, 5 ); -wxString list_opt3[3] = {_("Line"), _("Filled"), _("Sketch") }; - m_PlotModeOpt = new wxRadioBox(this, ID_PLOT_MODE_OPT, _("Plot Mode"), - wxDefaultPosition, wxDefaultSize, - 3, list_opt3, 1); - m_PlotModeOpt->SetSelection(Plot_Mode); - MidLeftBoxSizer->Add(m_PlotModeOpt, 0, wxGROW|wxALL, 5); + static const wxString scalemsg[5] = + { _( "Auto scale" ), _( "Scale 1" ), _( "Scale 1.5" ), _( "Scale 2" ), _( "Scale 3" ) }; - m_PlotMirorOpt = new wxCheckBox(this, ID_MIROR_OPT, - _("Plot Mirror")); - m_PlotMirorOpt->SetValue(Plot_Set_MIROIR); - MidLeftBoxSizer->Add(m_PlotMirorOpt, 0, wxGROW|wxALL, 5); + m_Scale_Opt = new wxRadioBox( this, ID_SCALE_OPT, + _( "Scale Opt" ), wxDefaultPosition, wxSize( -1, -1 ), + 5, scalemsg, 1, wxRA_SPECIFY_COLS ); - m_PlotNoViaOnMaskOpt = new wxCheckBox(this, ID_MASKVIA_OPT, - _("Vias on Mask")); - m_PlotNoViaOnMaskOpt->SetValue(g_DrawViaOnMaskLayer); - m_PlotNoViaOnMaskOpt->SetToolTip( - _("Print/plot vias on mask layers. They are in this case not protected") ); - MidLeftBoxSizer->Add(m_PlotNoViaOnMaskOpt, 0, wxGROW|wxALL, 5); + m_Scale_Opt->SetSelection( g_PlotScaleOpt ); + MidLeftBoxSizer->Add( m_Scale_Opt, 0, wxGROW | wxALL, 5 ); - m_HPGL_PlotCenter_Opt = new wxCheckBox(this, ID_PLOT_CENTRE_OPT, - _("Org = Centre")); - m_HPGL_PlotCenter_Opt->SetValue(HPGL_Org_Centre); - m_HPGL_PlotCenter_Opt->SetToolTip(_("Draw origin ( 0,0 ) in sheet center") ); - MidLeftBoxSizer->Add(m_HPGL_PlotCenter_Opt, 0, wxGROW|wxALL, 5); - // Mise a jour des activations des menus: -wxCommandEvent event; - SetCommands(event); + static const wxString list_opt3[3] = { _( "Line" ), _( "Filled" ), _( "Sketch" ) }; + m_PlotModeOpt = new wxRadioBox( this, ID_PLOT_MODE_OPT, _( "Plot Mode" ), + wxDefaultPosition, wxDefaultSize, + 3, list_opt3, 1 ); - GetSizer()->Fit(this); - GetSizer()->SetSizeHints(this); + m_PlotModeOpt->SetSelection( Plot_Mode ); + MidLeftBoxSizer->Add( m_PlotModeOpt, 0, wxGROW | wxALL, 5 ); + + m_PlotMirorOpt = new wxCheckBox( this, ID_MIROR_OPT, + _( "Plot Mirror" ) ); + + m_PlotMirorOpt->SetValue( Plot_Set_MIROIR ); + MidLeftBoxSizer->Add( m_PlotMirorOpt, 0, wxGROW | wxALL, 5 ); + + m_PlotNoViaOnMaskOpt = new wxCheckBox( this, ID_MASKVIA_OPT, + _( "Vias on Mask" ) ); + + m_PlotNoViaOnMaskOpt->SetValue( g_DrawViaOnMaskLayer ); + m_PlotNoViaOnMaskOpt->SetToolTip( + _( "Print/plot vias on mask layers. They are in this case not protected" ) ); + MidLeftBoxSizer->Add( m_PlotNoViaOnMaskOpt, 0, wxGROW | wxALL, 5 ); + + m_HPGL_PlotCenter_Opt = new wxCheckBox( this, ID_PLOT_CENTRE_OPT, + _( "Org = Centre" ) ); + + m_HPGL_PlotCenter_Opt->SetValue( HPGL_Org_Centre ); + m_HPGL_PlotCenter_Opt->SetToolTip( _( "Draw origin ( 0,0 ) in sheet center" ) ); + MidLeftBoxSizer->Add( m_HPGL_PlotCenter_Opt, 0, wxGROW | wxALL, 5 ); + + // Mise a jour des activations des menus: + wxCommandEvent event; + SetCommands( event ); + + GetSizer()->Fit( this ); + GetSizer()->SetSizeHints( this ); } /***************************************************************/ -void WinEDA_PlotFrame::OnQuit(wxCommandEvent& WXUNUSED(event)) +void WinEDA_PlotFrame::OnQuit( wxCommandEvent& WXUNUSED (event) ) /***************************************************************/ /* Called by the close button */ { - Close(true); // true is to force the frame to close + Close( true ); // true is to force the frame to close } /****************************************************/ -void WinEDA_PlotFrame::OnClose(wxCloseEvent & event) +void WinEDA_PlotFrame::OnClose( wxCloseEvent& event ) /****************************************************/ /* Called when WinEDA_PlotFrame is closed */ { - EndModal(0); + EndModal( 0 ); } /*********************************************************/ -void WinEDA_PlotFrame::CreateDrillFile(wxCommandEvent & event) +void WinEDA_PlotFrame::CreateDrillFile( wxCommandEvent& event ) /*********************************************************/ /* Create the board drill file used with gerber documents */ { - ((WinEDA_PcbFrame * )m_Parent)->InstallDrillFrame(event); + ( (WinEDA_PcbFrame*) m_Parent )->InstallDrillFrame( event ); } /*********************************************************/ -void WinEDA_PlotFrame::SetCommands(wxCommandEvent & event) +void WinEDA_PlotFrame::SetCommands( wxCommandEvent& event ) /*********************************************************/ /* active ou désactive les différents menus d'option selon le standard choisi */ { -int format; -int format_list[] = - {PLOT_FORMAT_HPGL, PLOT_FORMAT_GERBER, PLOT_FORMAT_POST, PLOT_FORMAT_POST_A4 - }; + int format; - format = format_list[m_PlotFormatOpt->GetSelection()]; + static const int format_list[] = { + PLOT_FORMAT_HPGL, PLOT_FORMAT_GERBER, + PLOT_FORMAT_POST, PLOT_FORMAT_POST_A4 + }; - switch( format ) - { - case PLOT_FORMAT_POST_A4: - case PLOT_FORMAT_POST: - default: - m_Drill_Shape_Opt->Enable(true); - m_PlotModeOpt->Enable(true); - m_PlotMirorOpt->Enable(true); - m_GerbSpotSizeMinOpt->Enable(false); - m_Choice_Plot_Offset->Enable(false); - m_LinesWidth->Enable(true); - m_HPGLPenSizeOpt->Enable(false); - m_HPGLPenSpeedOpt->Enable(false); - m_HPGLPenOverlayOpt->Enable(false); - m_HPGL_PlotCenter_Opt->Enable(false); - m_Exclude_Edges_Pcb->Enable(false); - m_Plot_Sheet_Ref->Enable(true); - m_Scale_Opt->Enable(true); - m_FineAdjustXscaleOpt->Enable(true); - m_FineAdjustYscaleOpt->Enable(true); - m_PlotFormat = PLOT_FORMAT_POST; - g_ForcePlotPS_On_A4 = (format == PLOT_FORMAT_POST_A4); - m_Plot_PS_Negative->Enable(true); - break; + format = format_list[m_PlotFormatOpt->GetSelection()]; - case PLOT_FORMAT_GERBER: - m_Drill_Shape_Opt->Enable(false); - m_PlotModeOpt->Enable(false); - m_PlotMirorOpt->Enable(false); - m_GerbSpotSizeMinOpt->Enable(true); - m_Choice_Plot_Offset->Enable(true); - m_LinesWidth->Enable(true); - m_HPGLPenSizeOpt->Enable(false); - m_HPGLPenSpeedOpt->Enable(false); - m_HPGLPenOverlayOpt->Enable(false); - m_HPGL_PlotCenter_Opt->Enable(false); - m_Exclude_Edges_Pcb->Enable(true); - m_Plot_Sheet_Ref->Enable(false); - m_Scale_Opt->Enable(false); - m_FineAdjustXscaleOpt->Enable(false); - m_FineAdjustYscaleOpt->Enable(false); - m_PlotFormat = PLOT_FORMAT_GERBER; - m_Plot_PS_Negative->Enable(false); - break; + switch( format ) + { + case PLOT_FORMAT_POST_A4: + case PLOT_FORMAT_POST: + default: + m_Drill_Shape_Opt->Enable( true ); + m_PlotModeOpt->Enable( true ); + m_PlotMirorOpt->Enable( true ); + m_GerbSpotSizeMinOpt->Enable( false ); + m_Choice_Plot_Offset->Enable( false ); + m_LinesWidth->Enable( true ); + m_HPGLPenSizeOpt->Enable( false ); + m_HPGLPenSpeedOpt->Enable( false ); + m_HPGLPenOverlayOpt->Enable( false ); + m_HPGL_PlotCenter_Opt->Enable( false ); + m_Exclude_Edges_Pcb->Enable( false ); + m_Plot_Sheet_Ref->Enable( true ); + m_Scale_Opt->Enable( true ); + m_FineAdjustXscaleOpt->Enable( true ); + m_FineAdjustYscaleOpt->Enable( true ); + m_PlotFormat = PLOT_FORMAT_POST; + g_ForcePlotPS_On_A4 = (format == PLOT_FORMAT_POST_A4); + m_Plot_PS_Negative->Enable( true ); + break; - case PLOT_FORMAT_HPGL: - m_PlotMirorOpt->Enable(true); - m_Drill_Shape_Opt->Enable(false); - m_PlotModeOpt->Enable(true); - m_GerbSpotSizeMinOpt->Enable(false); - m_Choice_Plot_Offset->Enable(false); - m_LinesWidth->Enable(false); - m_HPGLPenSizeOpt->Enable(true); - m_HPGLPenSpeedOpt->Enable(true); - m_HPGLPenOverlayOpt->Enable(true); - m_HPGL_PlotCenter_Opt->Enable(true); - m_Exclude_Edges_Pcb->Enable(false); - m_Plot_Sheet_Ref->Enable(true); - m_Scale_Opt->Enable(true); - m_FineAdjustXscaleOpt->Enable(false); - m_FineAdjustYscaleOpt->Enable(false); - m_PlotFormat = PLOT_FORMAT_HPGL; - m_Plot_PS_Negative->Enable(false); - break; - } - format_plot = m_PlotFormat; + case PLOT_FORMAT_GERBER: + m_Drill_Shape_Opt->Enable( false ); + m_PlotModeOpt->Enable( false ); + m_PlotMirorOpt->Enable( false ); + m_GerbSpotSizeMinOpt->Enable( true ); + m_Choice_Plot_Offset->Enable( true ); + m_LinesWidth->Enable( true ); + m_HPGLPenSizeOpt->Enable( false ); + m_HPGLPenSpeedOpt->Enable( false ); + m_HPGLPenOverlayOpt->Enable( false ); + m_HPGL_PlotCenter_Opt->Enable( false ); + m_Exclude_Edges_Pcb->Enable( true ); + m_Plot_Sheet_Ref->Enable( false ); + m_Scale_Opt->Enable( false ); + m_FineAdjustXscaleOpt->Enable( false ); + m_FineAdjustYscaleOpt->Enable( false ); + m_PlotFormat = PLOT_FORMAT_GERBER; + m_Plot_PS_Negative->Enable( false ); + break; + + case PLOT_FORMAT_HPGL: + m_PlotMirorOpt->Enable( true ); + m_Drill_Shape_Opt->Enable( false ); + m_PlotModeOpt->Enable( true ); + m_GerbSpotSizeMinOpt->Enable( false ); + m_Choice_Plot_Offset->Enable( false ); + m_LinesWidth->Enable( false ); + m_HPGLPenSizeOpt->Enable( true ); + m_HPGLPenSpeedOpt->Enable( true ); + m_HPGLPenOverlayOpt->Enable( true ); + m_HPGL_PlotCenter_Opt->Enable( true ); + m_Exclude_Edges_Pcb->Enable( false ); + m_Plot_Sheet_Ref->Enable( true ); + m_Scale_Opt->Enable( true ); + m_FineAdjustXscaleOpt->Enable( false ); + m_FineAdjustYscaleOpt->Enable( false ); + m_PlotFormat = PLOT_FORMAT_HPGL; + m_Plot_PS_Negative->Enable( false ); + break; + } + + format_plot = m_PlotFormat; } /*********************************************************/ -void WinEDA_PlotFrame::SaveOptPlot(wxCommandEvent & event) +void WinEDA_PlotFrame::SaveOptPlot( wxCommandEvent& event ) /*********************************************************/ { - g_Exclude_Edges_Pcb = m_Exclude_Edges_Pcb->GetValue(); + g_Exclude_Edges_Pcb = m_Exclude_Edges_Pcb->GetValue(); - if( m_Plot_Sheet_Ref ) - Plot_Sheet_Ref = m_Plot_Sheet_Ref->GetValue(); + if( m_Plot_Sheet_Ref ) + Plot_Sheet_Ref = m_Plot_Sheet_Ref->GetValue(); - PlotPadsOnSilkLayer = m_Plot_Pads_on_Silkscreen->GetValue(); - Plot_Pads_All_Layers = m_Force_Plot_Pads->GetValue(); + PlotPadsOnSilkLayer = m_Plot_Pads_on_Silkscreen->GetValue(); + Plot_Pads_All_Layers = m_Force_Plot_Pads->GetValue(); - s_PlotOriginIsAuxAxis = (m_Choice_Plot_Offset->GetSelection() == 0) ? FALSE : TRUE; + s_PlotOriginIsAuxAxis = (m_Choice_Plot_Offset->GetSelection() == 0) ? FALSE : TRUE; - Sel_Texte_Valeur = m_Plot_Text_Value->GetValue(); - Sel_Texte_Reference = m_Plot_Text_Ref->GetValue(); - Sel_Texte_Divers = m_Plot_Text_Div->GetValue(); - Sel_Texte_Invisible = m_Plot_Invisible_Text->GetValue(); + Sel_Texte_Valeur = m_Plot_Text_Value->GetValue(); + Sel_Texte_Reference = m_Plot_Text_Ref->GetValue(); + Sel_Texte_Divers = m_Plot_Text_Div->GetValue(); + Sel_Texte_Invisible = m_Plot_Invisible_Text->GetValue(); - g_PlotScaleOpt = m_Scale_Opt->GetSelection(); - g_DrillShapeOpt = m_Drill_Shape_Opt->GetSelection(); - Plot_Set_MIROIR = m_PlotMirorOpt->GetValue(); - if( Plot_Set_MIROIR ) - g_PlotOrient = PLOT_MIROIR; - else - g_PlotOrient = 0; - Plot_Mode = m_PlotModeOpt->GetSelection(); - g_DrawViaOnMaskLayer = m_PlotNoViaOnMaskOpt->GetValue(); - spot_mini = m_GerbSpotSizeMinOpt->GetValue(); - g_HPGL_Pen_Diam = m_HPGLPenSizeOpt->GetValue(); - g_HPGL_Pen_Speed = m_HPGLPenSpeedOpt->GetValue(); - g_HPGL_Pen_Recouvrement = m_HPGLPenOverlayOpt->GetValue(); - HPGL_Org_Centre = m_HPGL_PlotCenter_Opt->GetValue(); - g_PlotLine_Width = m_LinesWidth->GetValue(); + g_PlotScaleOpt = m_Scale_Opt->GetSelection(); + g_DrillShapeOpt = m_Drill_Shape_Opt->GetSelection(); + Plot_Set_MIROIR = m_PlotMirorOpt->GetValue(); + if( Plot_Set_MIROIR ) + g_PlotOrient = PLOT_MIROIR; + else + g_PlotOrient = 0; + Plot_Mode = m_PlotModeOpt->GetSelection(); + g_DrawViaOnMaskLayer = m_PlotNoViaOnMaskOpt->GetValue(); + spot_mini = m_GerbSpotSizeMinOpt->GetValue(); + g_HPGL_Pen_Diam = m_HPGLPenSizeOpt->GetValue(); + g_HPGL_Pen_Speed = m_HPGLPenSpeedOpt->GetValue(); + g_HPGL_Pen_Recouvrement = m_HPGLPenOverlayOpt->GetValue(); + HPGL_Org_Centre = m_HPGL_PlotCenter_Opt->GetValue(); + g_PlotLine_Width = m_LinesWidth->GetValue(); - m_XScaleAdjust = m_FineAdjustXscaleOpt->GetValue(); - m_YScaleAdjust = m_FineAdjustYscaleOpt->GetValue(); + m_XScaleAdjust = m_FineAdjustXscaleOpt->GetValue(); + m_YScaleAdjust = m_FineAdjustYscaleOpt->GetValue(); - if( m_Parent->m_Parent->m_EDA_Config ) - { - m_Parent->m_Parent->m_EDA_Config->Write( EDGELAYER_GERBER_OPT_KEY, g_Exclude_Edges_Pcb); - m_Parent->m_Parent->m_EDA_Config->Write( PLOT_XFINESCALE_ADJ_KEY, m_XScaleAdjust); - m_Parent->m_Parent->m_EDA_Config->Write( PLOT_YFINESCALE_ADJ_KEY, m_YScaleAdjust); - } + if( m_Parent->m_Parent->m_EDA_Config ) + { + m_Parent->m_Parent->m_EDA_Config->Write( EDGELAYER_GERBER_OPT_KEY, g_Exclude_Edges_Pcb ); + m_Parent->m_Parent->m_EDA_Config->Write( PLOT_XFINESCALE_ADJ_KEY, m_XScaleAdjust ); + m_Parent->m_Parent->m_EDA_Config->Write( PLOT_YFINESCALE_ADJ_KEY, m_YScaleAdjust ); + } - g_Plot_PS_Negative = m_Plot_PS_Negative->GetValue(); + g_Plot_PS_Negative = m_Plot_PS_Negative->GetValue(); } /***************************************************/ -void WinEDA_PlotFrame::Plot(wxCommandEvent & event) +void WinEDA_PlotFrame::Plot( wxCommandEvent& event ) /***************************************************/ { -int layer_to_plot; -wxString FullFileName, BaseFileName; -wxString ext; + int layer_to_plot; + wxString FullFileName, BaseFileName; + wxString ext; - SaveOptPlot(event); + BOARD* board = m_Parent->m_Pcb; - switch( g_PlotScaleOpt ) - { - default: - Scale_X = Scale_Y = 1; - break; + SaveOptPlot( event ); - case 2: - Scale_X = Scale_Y = 1.5; - break; + switch( g_PlotScaleOpt ) + { + default: + Scale_X = Scale_Y = 1; + break; - case 3: - Scale_X = Scale_Y = 2; - break; + case 2: + Scale_X = Scale_Y = 1.5; + break; - case 4: - Scale_X = Scale_Y = 3; - break; - } + case 3: + Scale_X = Scale_Y = 2; + break; - Scale_X *= m_XScaleAdjust; - Scale_Y *= m_YScaleAdjust; + case 4: + Scale_X = Scale_Y = 3; + break; + } - BaseFileName = m_Parent->GetScreen()->m_FileName; - ChangeFileNameExt( BaseFileName, wxT("-") ); + Scale_X *= m_XScaleAdjust; + Scale_Y *= m_YScaleAdjust; - switch( m_PlotFormat) - { - case PLOT_FORMAT_POST: - ext = wxT(".ps"); - break; + BaseFileName = m_Parent->GetScreen()->m_FileName; + ChangeFileNameExt( BaseFileName, wxT( "-" ) ); - case PLOT_FORMAT_GERBER: - ext = wxT(".pho"); - break; + switch( m_PlotFormat ) + { + case PLOT_FORMAT_POST: + ext = wxT( ".ps" ); + break; - case PLOT_FORMAT_HPGL: - ext = wxT(".plt"); - break; - } + case PLOT_FORMAT_GERBER: + ext = wxT( ".pho" ); + break; - int mask = 1; - s_SelectedLayers = 0; + case PLOT_FORMAT_HPGL: + ext = wxT( ".plt" ); + break; + } - for( layer_to_plot = 0; layer_to_plot < NB_LAYERS; layer_to_plot++, mask <<= 1 ) - { - if( m_BoxSelecLayer[layer_to_plot]->GetValue() ) - { - s_SelectedLayers |= mask; - // Calcul du nom du fichier - FullFileName = BaseFileName + ReturnPcbLayerName(layer_to_plot, true) + ext; - switch ( m_PlotFormat) - { - case PLOT_FORMAT_POST: - m_Parent->Genere_PS(FullFileName, layer_to_plot); - break; + int mask = 1; + s_SelectedLayers = 0; - case PLOT_FORMAT_GERBER: - m_Parent->Genere_GERBER(FullFileName, layer_to_plot, s_PlotOriginIsAuxAxis); - break; + for( layer_to_plot = 0; layer_to_plot < NB_LAYERS; layer_to_plot++, mask <<= 1 ) + { + if( m_BoxSelecLayer[layer_to_plot]->GetValue() ) + { + s_SelectedLayers |= mask; + + // Calcul du nom du fichier + FullFileName = BaseFileName + board->GetLayerName( layer_to_plot ) + ext; + + switch( m_PlotFormat ) + { + case PLOT_FORMAT_POST: + m_Parent->Genere_PS( FullFileName, layer_to_plot ); + break; + + case PLOT_FORMAT_GERBER: + m_Parent->Genere_GERBER( FullFileName, layer_to_plot, s_PlotOriginIsAuxAxis ); + break; + + case PLOT_FORMAT_HPGL: + m_Parent->Genere_HPGL( FullFileName, layer_to_plot ); + break; + } + } + } - case PLOT_FORMAT_HPGL: - m_Parent->Genere_HPGL(FullFileName, layer_to_plot); - break; - } - } - } // Close(true); } /**************************************************************/ -void WinEDA_BasePcbFrame::ToPlotter(wxCommandEvent& event) +void WinEDA_BasePcbFrame::ToPlotter( wxCommandEvent& event ) /***************************************************************/ { - WinEDA_PlotFrame * frame = new WinEDA_PlotFrame(this); - frame->ShowModal(); frame->Destroy(); -} + WinEDA_PlotFrame* frame = new WinEDA_PlotFrame( this ); + frame->ShowModal(); frame->Destroy(); +} diff --git a/pcbnew/pcbtexte.cpp b/pcbnew/pcbtexte.cpp index 8c9fa37660..3fd8794ba1 100644 --- a/pcbnew/pcbtexte.cpp +++ b/pcbnew/pcbtexte.cpp @@ -89,9 +89,12 @@ WinEDA_TextPCBPropertiesFrame::WinEDA_TextPCBPropertiesFrame( WinEDA_PcbFrame* p DIALOG_STYLE ) /************************************************************************************/ { - wxButton* Button; + wxButton* Button; + BOARD* board = parent->m_Pcb; m_Parent = parent; + + SetFont( *g_DialogFont ); m_DC = DC; Centre(); @@ -139,16 +142,17 @@ WinEDA_TextPCBPropertiesFrame::WinEDA_TextPCBPropertiesFrame( WinEDA_PcbFrame* p wxDefaultPosition, wxDefaultSize ); MiddleBoxSizer->Add( m_SelLayerBox, 0, wxGROW | wxALL, 5 ); - int ii; - for( ii = 0; ii < NB_LAYERS; ii++ ) + for( int layer=0; layerAppend( ReturnPcbLayerName( ii ) ); + m_SelLayerBox->Append( board->GetLayerName( layer ) ); } m_SelLayerBox->SetSelection( TextPCB->GetLayer() ); - wxString orient_msg[4] = { wxT( "0" ), wxT( "90" ), wxT( "180" ), wxT( "-90" ) }; + static const wxString orient_msg[4] = { + wxT( "0" ), wxT( "90" ), wxT( "180" ), wxT( "-90" ) }; + m_Orient = new wxRadioBox( this, -1, _( "Orientation" ), wxDefaultPosition, wxSize( -1, -1 ), 4, orient_msg, 1, wxRA_SPECIFY_COLS ); diff --git a/pcbnew/protos.h b/pcbnew/protos.h index cefaec5dfd..290062ba4e 100644 --- a/pcbnew/protos.h +++ b/pcbnew/protos.h @@ -71,12 +71,8 @@ void Trace_Pads_Only( WinEDA_DrawPanel* panel, wxDC* DC, MODULE* Module, int ox, /* LOCATE.CPP : */ /****************/ -MODULE* ReturnModule( BOARD* Pcb, const wxString& name ); - /* Recherche d'une empreinte par son nom */ -D_PAD* ReturnPad( MODULE* Module, const wxString& name ); - /* Recherche d'un pad par son nom, pour le module Module */ TRACK* Locate_Via( BOARD* Pcb, const wxPoint& pos, int layer = -1 ); @@ -417,7 +413,7 @@ MODULE* ListAndSelectModuleName( COMMAND* Cmd ); /*****************/ /* SET_COLOR.CPP */ /*****************/ -void DisplayColorSetupFrame( WinEDA_DrawFrame* parent, +void DisplayColorSetupFrame( WinEDA_PcbFrame* parent, const wxPoint& framepos ); diff --git a/pcbnew/sel_layer.cpp b/pcbnew/sel_layer.cpp index 1819558530..2993ef40fe 100644 --- a/pcbnew/sel_layer.cpp +++ b/pcbnew/sel_layer.cpp @@ -40,15 +40,15 @@ public: private: void Sel_Layer( wxCommandEvent& event ); - void OnCancelClick( wxCommandEvent& event ); + void OnCancelClick( wxCommandEvent& event ); DECLARE_EVENT_TABLE() }; /* Table des evenements pour WinEDA_SelLayerFrame */ BEGIN_EVENT_TABLE( WinEDA_SelLayerFrame, wxDialog ) - EVT_BUTTON( wxID_OK, WinEDA_SelLayerFrame::Sel_Layer ) - EVT_BUTTON( wxID_CANCEL, WinEDA_SelLayerFrame::OnCancelClick ) + EVT_BUTTON( wxID_OK, WinEDA_SelLayerFrame::Sel_Layer ) + EVT_BUTTON( wxID_CANCEL, WinEDA_SelLayerFrame::OnCancelClick ) EVT_RADIOBOX( ID_LAYER_SELECT, WinEDA_SelLayerFrame::Sel_Layer ) END_EVENT_TABLE() @@ -101,6 +101,7 @@ WinEDA_SelLayerFrame::WinEDA_SelLayerFrame( WinEDA_BasePcbFrame* parent, * to the right of that radiobox. */ { + BOARD* board = parent->m_Pcb; wxButton* Button; int ii; wxString LayerList[NB_LAYERS + 1]; // One extra element for "(Deselect)" radiobutton @@ -123,7 +124,7 @@ WinEDA_SelLayerFrame::WinEDA_SelLayerFrame( WinEDA_BasePcbFrame* parent, if( (max_layer >= 0) && (max_layer < ii) ) break; - LayerList[LayerCount] = ReturnPcbLayerName( ii ); + LayerList[LayerCount] = board->GetLayerName( ii ); if( ii == default_layer ) LayerSelect = LayerCount; @@ -207,8 +208,8 @@ public: ~WinEDA_SelLayerPairFrame() { }; private: - void OnOkClick( wxCommandEvent& event ); - void OnCancelClick( wxCommandEvent& event ); + void OnOkClick( wxCommandEvent& event ); + void OnCancelClick( wxCommandEvent& event ); DECLARE_EVENT_TABLE() }; @@ -216,8 +217,8 @@ private: /* Table des evenements pour WinEDA_SelLayerPairFrame */ BEGIN_EVENT_TABLE( WinEDA_SelLayerPairFrame, wxDialog ) - EVT_BUTTON( wxID_OK, WinEDA_SelLayerPairFrame::OnOkClick ) - EVT_BUTTON( wxID_CANCEL, WinEDA_SelLayerPairFrame::OnCancelClick ) + EVT_BUTTON( wxID_OK, WinEDA_SelLayerPairFrame::OnOkClick ) + EVT_BUTTON( wxID_CANCEL, WinEDA_SelLayerPairFrame::OnCancelClick ) END_EVENT_TABLE() @@ -249,8 +250,8 @@ void WinEDA_BasePcbFrame::SelectLayerPair() DrawPanel->MouseToCursorSchema(); SetToolbars(); - // if user changed colors and we are in high contrast mode, then redraw - // because the PAD_SMD pads may change color. + // if user changed colors and we are in high contrast mode, then redraw + // because the PAD_SMD pads may change color. if( result >= 0 && DisplayOpt.ContrastModeDisplay ) { ReDrawPanel(); @@ -264,6 +265,7 @@ WinEDA_SelLayerPairFrame::WinEDA_SelLayerPairFrame( WinEDA_BasePcbFrame* parent wxSize( 470, 250 ), DIALOG_STYLE ) /*******************************************************************************/ { + BOARD* board = parent->m_Pcb; wxButton* Button; int ii, LayerCount; wxString LayerList[NB_COPPER_LAYERS]; @@ -281,7 +283,7 @@ WinEDA_SelLayerPairFrame::WinEDA_SelLayerPairFrame( WinEDA_BasePcbFrame* parent m_LayerId[ii] = 0; if( (g_TabOneLayerMask[ii] & Masque_Layer) ) { - LayerList[LayerCount] = ReturnPcbLayerName( ii ); + LayerList[LayerCount] = board->GetLayerName( ii ); if( ii == screen->m_Route_Layer_TOP ) LayerTopSelect = LayerCount; if( ii == screen->m_Route_Layer_BOTTOM ) diff --git a/pcbnew/set_color.cpp b/pcbnew/set_color.cpp index 330625c9ed..2be4950d7b 100644 --- a/pcbnew/set_color.cpp +++ b/pcbnew/set_color.cpp @@ -51,7 +51,7 @@ END_EVENT_TABLE() /*****************************************************/ -void DisplayColorSetupFrame( WinEDA_DrawFrame* parent, +void DisplayColorSetupFrame( WinEDA_PcbFrame* parent, const wxPoint& framepos ) /*****************************************************/ { @@ -72,7 +72,7 @@ WinEDA_SetColorsFrame::WinEDA_SetColorsFrame() // Standard Constructor -WinEDA_SetColorsFrame::WinEDA_SetColorsFrame( WinEDA_DrawFrame* parent, +WinEDA_SetColorsFrame::WinEDA_SetColorsFrame( WinEDA_PcbFrame* parent, const wxPoint& framepos ) { m_Parent = parent; @@ -225,7 +225,7 @@ void WinEDA_SetColorsFrame::CreateControls() if( laytool_list[lyr]->m_Title == wxT( "*" ) ) msg = g_ViaType_Name[laytool_list[lyr]->m_LayerNumber]; else - msg = ReturnPcbLayerName( laytool_list[lyr]->m_LayerNumber ); + msg = m_Parent->m_Pcb->GetLayerName( laytool_list[lyr]->m_LayerNumber ); } else msg = wxGetTranslation( laytool_list[lyr]->m_Title.GetData() ); diff --git a/pcbnew/set_color.h b/pcbnew/set_color.h index 2801eaacca..8b74acf611 100644 --- a/pcbnew/set_color.h +++ b/pcbnew/set_color.h @@ -492,7 +492,7 @@ static ColorButton* laytool_list[] = { &VIA_THROUGH_Butt, &VIA_BLIND_BURIED_Butt, - &MICRO_VIA_Butt, + &MICRO_VIA_Butt, &Ratsnest_Butt, &Pad_Cu_Butt, &Pad_Cmp_Butt, @@ -526,7 +526,7 @@ private: DECLARE_DYNAMIC_CLASS( WinEDA_SetColorsFrame ) DECLARE_EVENT_TABLE() - WinEDA_DrawFrame* m_Parent; + WinEDA_PcbFrame* m_Parent; wxBoxSizer* OuterBoxSizer; wxBoxSizer* MainBoxSizer; wxFlexGridSizer* FlexColumnBoxSizer; @@ -566,7 +566,7 @@ private: public: // Constructors and destructor WinEDA_SetColorsFrame(); - WinEDA_SetColorsFrame( WinEDA_DrawFrame* parent, const wxPoint& framepos ); + WinEDA_SetColorsFrame( WinEDA_PcbFrame* parent, const wxPoint& framepos ); ~WinEDA_SetColorsFrame(); }; diff --git a/pcbnew/specctra_export.cpp b/pcbnew/specctra_export.cpp index cc847ddb69..329bb89fa7 100644 --- a/pcbnew/specctra_export.cpp +++ b/pcbnew/specctra_export.cpp @@ -826,6 +826,17 @@ void SPECCTRA_DB::FromBOARD( BOARD* aBoard ) throw( IOError ) layer->name = layerIds[pcbNdx]; + DSN_T layerType; + switch( aBoard->GetLayerType( pcbLayer2kicad[pcbNdx] ) ) + { + default: + case LT_SIGNAL: layerType = T_signal; break; + case LT_POWER: layerType = T_power; break; + case LT_MIXED: layerType = T_mixed; break; + } + + layer->layer_type = layerType; + layer->properties.push_back( PROPERTY() ); PROPERTY* property = &layer->properties.back(); property->name = "index"; diff --git a/pcbnew/swap_layers.cpp b/pcbnew/swap_layers.cpp index 7e57c7c8e3..cc75facf31 100644 --- a/pcbnew/swap_layers.cpp +++ b/pcbnew/swap_layers.cpp @@ -71,6 +71,8 @@ WinEDA_SwapLayerFrame::WinEDA_SwapLayerFrame( WinEDA_BasePcbFrame* parent ) : wxDefaultSize, wxDEFAULT_DIALOG_STYLE|MAYBE_RESIZE_BORDER ) /*************************************************************************/ { + BOARD* board = parent->m_Pcb; + OuterBoxSizer = NULL; MainBoxSizer = NULL; FlexColumnBoxSizer = NULL; @@ -154,7 +156,8 @@ WinEDA_SwapLayerFrame::WinEDA_SwapLayerFrame( WinEDA_BasePcbFrame* parent ) : } // Provide a text string to identify this layer (with trailing spaces within that string being purged) - label = new wxStaticText( this, wxID_STATIC, ReturnPcbLayerName( ii ).Trim(), wxDefaultPosition, wxDefaultSize, wxALIGN_RIGHT ); + label = new wxStaticText( this, wxID_STATIC, board->GetLayerName( ii ), + wxDefaultPosition, wxDefaultSize, wxALIGN_RIGHT ); FlexColumnBoxSizer->Add(label, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxLEFT|wxBOTTOM, 5); // Provide a button for this layer (which will invoke a child dialog box) @@ -177,11 +180,11 @@ WinEDA_SwapLayerFrame::WinEDA_SwapLayerFrame( WinEDA_BasePcbFrame* parent ) : // strings to be truncated after different layers are selected.) if( ii == 0 ) { - text = new wxStaticText( this, item_ID, ReturnPcbLayerName( 0 ), wxDefaultPosition, wxDefaultSize, 0 ); + text = new wxStaticText( this, item_ID, board->GetLayerName( 0 ), wxDefaultPosition, wxDefaultSize, 0 ); goodSize = text->GetSize(); for( int jj = 1; jj < NB_LAYERS; jj++ ) { - text->SetLabel( ReturnPcbLayerName( jj ) ); + text->SetLabel( board->GetLayerName( jj ) ); if( goodSize.x < text->GetSize().x ) goodSize.x = text->GetSize().x; } @@ -252,7 +255,7 @@ void WinEDA_SwapLayerFrame::Sel_Layer( wxCommandEvent& event ) if( (jj < 0) || (jj > NB_LAYERS) ) jj = LAYER_NO_CHANGE; // (Defaults to "No Change".) jj = m_Parent->SelectLayer( jj, -1, -1, true ); - + if( (jj < 0) || (jj > NB_LAYERS) ) return; @@ -280,7 +283,7 @@ void WinEDA_SwapLayerFrame::Sel_Layer( wxCommandEvent& event ) } else { - layer_list[ii]->SetLabel( ReturnPcbLayerName( jj ) ); + layer_list[ii]->SetLabel( m_Parent->m_Pcb->GetLayerName( jj ) ); // Change the text color to fushia (to highlight // that this layer *is* being swapped) layer_list[ii]->SetForegroundColour( wxColour(255, 0, 128) ); diff --git a/pcbnew/tool_pcb.cpp b/pcbnew/tool_pcb.cpp index 8f1be721ba..a8cdd1f61e 100644 --- a/pcbnew/tool_pcb.cpp +++ b/pcbnew/tool_pcb.cpp @@ -691,7 +691,7 @@ WinEDAChoiceBox* WinEDA_PcbFrame::ReCreateLayerBox( WinEDA_Toolbar* parent ) if( (g_TabOneLayerMask[ii] & Masque_Layer) ) { - wxString msg = ReturnPcbLayerName( ii, false ); + wxString msg = m_Pcb->GetLayerName( ii ); msg = AddHotkeyName( msg, s_Board_Editor_Hokeys_Descr, HK_SwitchLayer[ii] ); m_SelLayerBox->Append( msg ); m_SelLayerBox->SetClientData( jj, (void*) ii ); diff --git a/share/wxprint.cpp b/share/wxprint.cpp index 0d742a83e4..52ceeb863f 100644 --- a/share/wxprint.cpp +++ b/share/wxprint.cpp @@ -51,11 +51,11 @@ #ifdef PCBNEW #include "pcbnew.h" -extern float Scale_X, Scale_Y; -static long s_SelectedLayers = CUIVRE_LAYER | CMP_LAYER | - SILKSCREEN_LAYER_CMP | SILKSCREEN_LAYER_CU; +extern float Scale_X, Scale_Y; +static long s_SelectedLayers = CUIVRE_LAYER | CMP_LAYER | + SILKSCREEN_LAYER_CMP | SILKSCREEN_LAYER_CU; static double s_ScaleList[] = - { 0, 0.5, 0.7, 0.999, 1.0, 1.4, 2.0, 3.0, 4.0 }; +{ 0, 0.5, 0.7, 0.999, 1.0, 1.4, 2.0, 3.0, 4.0 }; #endif #include "protos.h" @@ -70,91 +70,97 @@ static double s_ScaleList[] = #define WIDTH_MIN_VALUE 1 // static print data and page setup data, to remember settings during the session -static wxPrintData * g_PrintData; +static wxPrintData* g_PrintData; // Variables locales -static int s_PrintPenMinWidth = 6; /* Minimum pen width (in internal units) for printing */ +static int s_PrintPenMinWidth = 6; /* Minimum pen width (in internal units) for printing */ -static int s_PrintMaskLayer; -static int s_OptionPrintPage = 0; -static int s_Print_Black_and_White = TRUE; -static int s_Scale_Select = 3; // default selected scale = ScaleList[3] = 1 -static bool s_PrintMirror; -static bool s_Print_Sheet_Ref = TRUE; +static int s_PrintMaskLayer; +static int s_OptionPrintPage = 0; +static int s_Print_Black_and_White = TRUE; +static int s_Scale_Select = 3; // default selected scale = ScaleList[3] = 1 +static bool s_PrintMirror; +static bool s_Print_Sheet_Ref = TRUE; - /****************************************************************/ - /* frame de Preparation de l'impression (options, selections... */ - /****************************************************************/ +/****************************************************************/ +/* frame de Preparation de l'impression (options, selections... */ +/****************************************************************/ #include "dialog_print.cpp" - /***************************/ - /* Gestion de l'impression */ - /***************************/ +/***************************/ +/* Gestion de l'impression */ +/***************************/ -class EDA_Printout: public wxPrintout +class EDA_Printout : public wxPrintout { public: - bool m_Print_Sheet_Ref; + bool m_Print_Sheet_Ref; public: - WinEDA_DrawFrame * m_Parent; - WinEDA_PrintFrame * m_PrintFrame; + WinEDA_DrawFrame* m_Parent; + WinEDA_PrintFrame* m_PrintFrame; - EDA_Printout(WinEDA_PrintFrame * print_frame, WinEDA_DrawFrame * parent, const wxString & title, bool print_ref): - wxPrintout(title) - { - m_PrintFrame = print_frame; - m_Parent = parent; - s_PrintMaskLayer = 0xFFFFFFFF; - m_Print_Sheet_Ref = print_ref; - } + EDA_Printout( WinEDA_PrintFrame * print_frame, + WinEDA_DrawFrame * parent, + const wxString &title, + bool print_ref ) : + wxPrintout( title ) { + m_PrintFrame = print_frame; + m_Parent = parent; + s_PrintMaskLayer = 0xFFFFFFFF; + m_Print_Sheet_Ref = print_ref; + } - bool OnPrintPage(int page); - bool HasPage(int page); - bool OnBeginDocument(int startPage, int endPage); - void GetPageInfo(int *minPage, int *maxPage, int *selPageFrom, int *selPageTo); + bool OnPrintPage( int page ); + bool HasPage( int page ); + bool OnBeginDocument( int startPage, int endPage ); + void GetPageInfo( int* minPage, int* maxPage, int* selPageFrom, int* selPageTo ); - void DrawPage(); + void DrawPage(); }; /*******************************************************/ -void WinEDA_DrawFrame::ToPrinter(wxCommandEvent& event) +void WinEDA_DrawFrame::ToPrinter( wxCommandEvent& event ) /*******************************************************/ + /* Prepare les structures de donn�es de gestion de l'impression -et affiche la fenetre de dialogue de gestion de l'impression des feuilles -*/ + * et affiche la fenetre de dialogue de gestion de l'impression des feuilles + */ { -wxPoint pos = GetPosition(); -bool PrinterError = FALSE; + wxPoint pos = GetPosition(); + bool PrinterError = FALSE; - // Stop the pending comand (if any...) - if( DrawPanel->ManageCurseur && DrawPanel->ForceCloseManageCurseur ) - { - wxClientDC dc(DrawPanel); - DrawPanel->PrepareDC(dc); - DrawPanel->ForceCloseManageCurseur(DrawPanel, &dc); - } - SetToolID(0, wxCURSOR_ARROW,wxEmptyString); + // Stop the pending comand (if any...) + if( DrawPanel->ManageCurseur && DrawPanel->ForceCloseManageCurseur ) + { + wxClientDC dc( DrawPanel ); - if ( g_PrintData == NULL ) // First print - { + DrawPanel->PrepareDC( dc ); + DrawPanel->ForceCloseManageCurseur( DrawPanel, &dc ); + } + SetToolID( 0, wxCURSOR_ARROW, wxEmptyString ); + + if( g_PrintData == NULL ) // First print + { g_PrintData = new wxPrintData(); - if ( ! g_PrintData->Ok() ) - { + + if( !g_PrintData->Ok() ) + { PrinterError = TRUE; - DisplayError( this, _("Error Init Printer info") ); - } - g_PrintData->SetQuality(wxPRINT_QUALITY_HIGH); // Default resolution = HIGHT; - g_PrintData->SetOrientation(DEFAULT_ORIENTATION_PAPER); - } + DisplayError( this, _( "Error Init Printer info" ) ); + } + g_PrintData->SetQuality( wxPRINT_QUALITY_HIGH ); // Default resolution = HIGHT; + g_PrintData->SetOrientation( DEFAULT_ORIENTATION_PAPER ); + } - pos.x += 10; pos.y += 10; - WinEDA_PrintFrame * frame = new WinEDA_PrintFrame(this); - frame->ShowModal(); frame->Destroy(); + pos.x += 10; pos.y += 10; + WinEDA_PrintFrame* frame = new WinEDA_PrintFrame( this ); + + frame->ShowModal(); frame->Destroy(); #ifdef EESCHEMA - g_PrintFillMask = 0; + g_PrintFillMask = 0; #endif } @@ -164,594 +170,641 @@ void WinEDA_PrintFrame::SetOthersDatas() /*******************************************/ { #ifndef PCBNEW - m_Print_Mirror->Enable(false); + m_Print_Mirror->Enable( false ); #endif - m_FineAdjustXscaleOpt->SetToolTip(_("Set X scale adjust for exact scale plotting")); - m_FineAdjustYscaleOpt->SetToolTip(_("Set Y scale adjust for exact scale plotting")); - if ( s_Print_Black_and_White ) m_ColorOption->SetSelection(1); + m_FineAdjustXscaleOpt->SetToolTip( _( "Set X scale adjust for exact scale plotting" ) ); + m_FineAdjustYscaleOpt->SetToolTip( _( "Set Y scale adjust for exact scale plotting" ) ); + if( s_Print_Black_and_White ) + m_ColorOption->SetSelection( 1 ); #ifdef PCBNEW - m_PagesOptionEeschema->Show(false); - m_PagesOption = m_PagesOptionPcb; - /* Create layer list */ - int mask = 1, ii; - for ( ii = 0; ii < NB_LAYERS; ii++, mask <<= 1 ) - { - m_BoxSelecLayer[ii] = new wxCheckBox(this, -1, - ReturnPcbLayerName(ii)); - if ( mask & s_SelectedLayers) m_BoxSelecLayer[ii]->SetValue(TRUE); - if ( ii < 16 ) - m_CopperLayersBoxSizer->Add(m_BoxSelecLayer[ii], - wxGROW|wxLEFT|wxRIGHT|wxTOP|wxADJUST_MINSIZE); - else - m_TechLayersBoxSizer->Add(m_BoxSelecLayer[ii], - wxGROW|wxLEFT|wxRIGHT|wxTOP|wxADJUST_MINSIZE); - } - // Read the scale adjust option - if ( m_Parent->m_Parent->m_EDA_Config ) - { - m_Parent->m_Parent->m_EDA_Config->Read( wxT("PrintXFineScaleAdj"), &m_XScaleAdjust); - m_Parent->m_Parent->m_EDA_Config->Read( wxT("PrintYFineScaleAdj"), &m_YScaleAdjust); - m_Parent->m_Parent->m_EDA_Config->Read( wxT("PrintScale"), &s_Scale_Select); - } + m_PagesOptionEeschema->Show( false ); + m_PagesOption = m_PagesOptionPcb; - m_ScaleOption->SetSelection(s_Scale_Select); + /* Create layer list */ + int mask = 1, ii; + for( ii = 0; ii < NB_LAYERS; ii++, mask <<= 1 ) + { + m_BoxSelecLayer[ii] = new wxCheckBox( this, -1, +#if defined(PCBNEW) + ((WinEDA_PcbFrame*)m_Parent)->m_Pcb->GetLayerName(ii) ); +#else + ReturnLayerName( ii ) ); +#endif - // Create scale adjust option - wxString msg; - msg.Printf(wxT("%lf"), m_XScaleAdjust); - m_FineAdjustXscaleOpt->SetValue(msg); - msg.Printf(wxT("%lf"), m_YScaleAdjust); - m_FineAdjustYscaleOpt->SetValue(msg); + if( mask & s_SelectedLayers ) + m_BoxSelecLayer[ii]->SetValue( TRUE ); + if( ii < 16 ) + m_CopperLayersBoxSizer->Add( m_BoxSelecLayer[ii], + wxGROW | wxLEFT | wxRIGHT | wxTOP | wxADJUST_MINSIZE ); + else + m_TechLayersBoxSizer->Add( m_BoxSelecLayer[ii], + wxGROW | wxLEFT | wxRIGHT | wxTOP | wxADJUST_MINSIZE ); + } + + // Read the scale adjust option + if( m_Parent->m_Parent->m_EDA_Config ) + { + m_Parent->m_Parent->m_EDA_Config->Read( wxT( "PrintXFineScaleAdj" ), &m_XScaleAdjust ); + m_Parent->m_Parent->m_EDA_Config->Read( wxT( "PrintYFineScaleAdj" ), &m_YScaleAdjust ); + m_Parent->m_Parent->m_EDA_Config->Read( wxT( "PrintScale" ), &s_Scale_Select ); + } + + m_ScaleOption->SetSelection( s_Scale_Select ); + + // Create scale adjust option + wxString msg; + msg.Printf( wxT( "%lf" ), m_XScaleAdjust ); + m_FineAdjustXscaleOpt->SetValue( msg ); + msg.Printf( wxT( "%lf" ), m_YScaleAdjust ); + m_FineAdjustYscaleOpt->SetValue( msg ); #else - m_PagesOption = m_PagesOptionEeschema; - m_PagesOptionPcb->Show(false); - m_ScaleOption->Show(false); - m_FineAdjustXscaleTitle->Show(false); - m_FineAdjustXscaleOpt->Show(false); - m_FineAdjustYscaleTitle->Show(false); - m_FineAdjustYscaleOpt->Show(false); + m_PagesOption = m_PagesOptionEeschema; + m_PagesOptionPcb->Show( false ); + m_ScaleOption->Show( false ); + m_FineAdjustXscaleTitle->Show( false ); + m_FineAdjustXscaleOpt->Show( false ); + m_FineAdjustYscaleTitle->Show( false ); + m_FineAdjustYscaleOpt->Show( false ); #endif } + /**********************************************************/ int WinEDA_PrintFrame::SetLayerMaskFromListSelection() /**********************************************************/ { -int page_count; + int page_count; - s_PrintMaskLayer = 0; + s_PrintMaskLayer = 0; #ifdef PCBNEW -int ii; - for ( ii = 0, page_count = 0; ii < NB_LAYERS; ii++ ) - { - if ( m_BoxSelecLayer[ii]->IsChecked() ) - { - page_count++; - s_PrintMaskLayer |= 1 << ii; - } - } + int ii; + for( ii = 0, page_count = 0; ii < NB_LAYERS; ii++ ) + { + if( m_BoxSelecLayer[ii]->IsChecked() ) + { + page_count++; + s_PrintMaskLayer |= 1 << ii; + } + } + #else - page_count = 1; + page_count = 1; #endif - return page_count; + return page_count; } + /************************************************************/ -void WinEDA_PrintFrame::SetColorOrBlack(wxCommandEvent& event) +void WinEDA_PrintFrame::SetColorOrBlack( wxCommandEvent& event ) /************************************************************/ { - s_Print_Black_and_White = m_ColorOption->GetSelection(); + s_Print_Black_and_White = m_ColorOption->GetSelection(); } + /****************************************************/ -void WinEDA_PrintFrame::OnClosePrintDialog() +void WinEDA_PrintFrame::OnClosePrintDialog() /****************************************************/ + /* called when WinEDA_PrintFrame is closed -*/ + */ { - wxConfig * Config = m_Parent->m_Parent->m_EDA_Config; - if ( Config ) - { - Config->Write(wxT("PrintPenWidth"), s_PrintPenMinWidth); - } + wxConfig* Config = m_Parent->m_Parent->m_EDA_Config; - if ( m_FineAdjustXscaleOpt ) - m_FineAdjustXscaleOpt->GetValue().ToDouble(&m_XScaleAdjust); - if ( m_FineAdjustYscaleOpt ) - m_FineAdjustYscaleOpt->GetValue().ToDouble(&m_YScaleAdjust); - SetPenWidth(); + if( Config ) + { + Config->Write( wxT( "PrintPenWidth" ), s_PrintPenMinWidth ); + } + + if( m_FineAdjustXscaleOpt ) + m_FineAdjustXscaleOpt->GetValue().ToDouble( &m_XScaleAdjust ); + if( m_FineAdjustYscaleOpt ) + m_FineAdjustYscaleOpt->GetValue().ToDouble( &m_YScaleAdjust ); + SetPenWidth(); #ifdef PCBNEW - if ( Config ) - { - Config->Write(wxT("PrintXFineScaleAdj"), m_XScaleAdjust); - Config->Write(wxT("PrintYFineScaleAdj"), m_YScaleAdjust); - Config->Write(wxT("PrintScale"), s_Scale_Select); - } + if( Config ) + { + Config->Write( wxT( "PrintXFineScaleAdj" ), m_XScaleAdjust ); + Config->Write( wxT( "PrintYFineScaleAdj" ), m_YScaleAdjust ); + Config->Write( wxT( "PrintScale" ), s_Scale_Select ); + } #endif - EndModal(0); + EndModal( 0 ); } /************************************************/ wxString WinEDA_PrintFrame::BuildPrintTitle() /************************************************/ -/* return a valid filename to create a print file -*/ -{ -wxString name, ext; - wxFileName::SplitPath(m_Parent->GetScreen()->m_FileName, - (wxString*) NULL, & name, & ext); - name += wxT("-") + ext; - return name; +/* return a valid filename to create a print file + */ +{ + wxString name, ext; + + wxFileName::SplitPath( m_Parent->GetScreen()->m_FileName, + (wxString*) NULL, &name, &ext ); + name += wxT( "-" ) + ext; + return name; } + /******************************************************/ -void WinEDA_PrintFrame::SetScale(wxCommandEvent& event) +void WinEDA_PrintFrame::SetScale( wxCommandEvent& event ) /******************************************************/ { #ifdef PCBNEW - s_Scale_Select = m_ScaleOption->GetSelection(); - Scale_X = Scale_Y = s_ScaleList[s_Scale_Select]; - if ( m_FineAdjustXscaleOpt ) - m_FineAdjustXscaleOpt->GetValue().ToDouble(&m_XScaleAdjust); - if ( m_FineAdjustYscaleOpt ) - m_FineAdjustYscaleOpt->GetValue().ToDouble(&m_YScaleAdjust); - Scale_X *= m_XScaleAdjust; - Scale_Y *= m_YScaleAdjust; + s_Scale_Select = m_ScaleOption->GetSelection(); + Scale_X = Scale_Y = s_ScaleList[s_Scale_Select]; + if( m_FineAdjustXscaleOpt ) + m_FineAdjustXscaleOpt->GetValue().ToDouble( &m_XScaleAdjust ); + if( m_FineAdjustYscaleOpt ) + m_FineAdjustYscaleOpt->GetValue().ToDouble( &m_YScaleAdjust ); + Scale_X *= m_XScaleAdjust; + Scale_Y *= m_YScaleAdjust; #endif } + /****************************************/ void WinEDA_PrintFrame::SetPenWidth() /****************************************/ + /* Get the new pen width value, and verify min et max value - NOTE: s_PrintPenMinWidth is in internal units -*/ + * NOTE: s_PrintPenMinWidth is in internal units + */ { - s_PrintPenMinWidth = m_DialogPenWidth->GetValue(); - if ( s_PrintPenMinWidth > WIDTH_MAX_VALUE ) - { - s_PrintPenMinWidth = WIDTH_MAX_VALUE; - } - if ( s_PrintPenMinWidth < WIDTH_MIN_VALUE ) - { - s_PrintPenMinWidth = WIDTH_MIN_VALUE; - } - m_DialogPenWidth->SetValue(s_PrintPenMinWidth); + s_PrintPenMinWidth = m_DialogPenWidth->GetValue(); + if( s_PrintPenMinWidth > WIDTH_MAX_VALUE ) + { + s_PrintPenMinWidth = WIDTH_MAX_VALUE; + } + if( s_PrintPenMinWidth < WIDTH_MIN_VALUE ) + { + s_PrintPenMinWidth = WIDTH_MIN_VALUE; + } + m_DialogPenWidth->SetValue( s_PrintPenMinWidth ); } /**********************************************************/ -void WinEDA_PrintFrame::OnPrintSetup(wxCommandEvent& event) +void WinEDA_PrintFrame::OnPrintSetup( wxCommandEvent& event ) /**********************************************************/ + /* Open a dialog box for printer setup (printer options, page size ...) -*/ + */ { - wxPrintDialogData printDialogData(*g_PrintData); - if ( printDialogData.Ok() ) - { - wxPrintDialog printerDialog(this, & printDialogData); - printerDialog.ShowModal(); + wxPrintDialogData printDialogData( * g_PrintData ); - * g_PrintData = printerDialog.GetPrintDialogData().GetPrintData(); - } - else DisplayError(this, _("Printer Problem!") ); + if( printDialogData.Ok() ) + { + wxPrintDialog printerDialog( this,& printDialogData ); + + printerDialog.ShowModal(); + + *g_PrintData = printerDialog.GetPrintDialogData().GetPrintData(); + } + else + DisplayError( this, _( "Printer Problem!" ) ); } /************************************************************/ -void WinEDA_PrintFrame::OnPrintPreview(wxCommandEvent& event) +void WinEDA_PrintFrame::OnPrintPreview( wxCommandEvent& event ) /************************************************************/ + /* Open and display a previewer frame for printing -*/ + */ { -wxSize WSize; -wxPoint WPos; -int x, y; -bool print_ref = TRUE; + wxSize WSize; + wxPoint WPos; + int x, y; + bool print_ref = TRUE; - SetScale(event); - SetPenWidth(); + SetScale( event ); + SetPenWidth(); - if ( m_PagesOption ) - s_OptionPrintPage = m_PagesOption->GetSelection(); + if( m_PagesOption ) + s_OptionPrintPage = m_PagesOption->GetSelection(); - if ( (m_Print_Sheet_Ref == NULL) || (m_Print_Sheet_Ref->GetValue() == FALSE) ) - print_ref = FALSE; + if( (m_Print_Sheet_Ref == NULL) || (m_Print_Sheet_Ref->GetValue() == FALSE) ) + print_ref = FALSE; - // Pass two printout objects: for preview, and possible printing. -wxString title = BuildPrintTitle(); - wxPrintPreview *preview = - new wxPrintPreview(new EDA_Printout(this, m_Parent, title, print_ref), - new EDA_Printout(this, m_Parent, title, print_ref), g_PrintData); - if ( preview == NULL ) - { - DisplayError(this, _("There was a problem previewing")); - return; - } + // Pass two printout objects: for preview, and possible printing. + wxString title = BuildPrintTitle(); + wxPrintPreview* preview = + new wxPrintPreview( new EDA_Printout (this, m_Parent, title, print_ref), + new EDA_Printout (this, m_Parent, title, print_ref), g_PrintData ); + + if( preview == NULL ) + { + DisplayError( this, _( "There was a problem previewing" ) ); + return; + } #ifdef PCBNEW - if ( s_OptionPrintPage ) SetLayerMaskFromListSelection(); + if( s_OptionPrintPage ) + SetLayerMaskFromListSelection(); #endif - m_Parent->GetPosition(&x, &y); - WPos.x = x + 4; - WPos.y = y + 25; + m_Parent->GetPosition( &x, &y ); + WPos.x = x + 4; + WPos.y = y + 25; - WSize = m_Parent->GetSize(); - WSize.x -= 3; - WSize.y += 6; + WSize = m_Parent->GetSize(); + WSize.x -= 3; + WSize.y += 6; - wxPreviewFrame *frame = new wxPreviewFrame(preview, this, - title, WPos, WSize); - frame->Initialize(); - frame->Show(TRUE); + wxPreviewFrame* frame = new wxPreviewFrame( preview, this, + title, WPos, WSize ); + + frame->Initialize(); + frame->Show( TRUE ); } /**********************************************************/ -void WinEDA_PrintFrame::EDA_PrintPage(wxCommandEvent& event) +void WinEDA_PrintFrame::EDA_PrintPage( wxCommandEvent& event ) /**********************************************************/ + /* Called on activate "Print CURRENT" button -*/ + */ { -bool print_ref = TRUE; + bool print_ref = TRUE; - SetScale(event); + SetScale( event ); - s_OptionPrintPage = 0; - if ( m_PagesOption ) - s_OptionPrintPage = m_PagesOption->GetSelection(); + s_OptionPrintPage = 0; + if( m_PagesOption ) + s_OptionPrintPage = m_PagesOption->GetSelection(); - if ( (m_Print_Sheet_Ref == NULL) || (m_Print_Sheet_Ref->GetValue() == FALSE) ) - print_ref = FALSE; + if( (m_Print_Sheet_Ref == NULL) || (m_Print_Sheet_Ref->GetValue() == FALSE) ) + print_ref = FALSE; #ifdef PCBNEW - if ( s_OptionPrintPage ) SetLayerMaskFromListSelection(); + if( s_OptionPrintPage ) + SetLayerMaskFromListSelection(); #endif - SetPenWidth(); + SetPenWidth(); - wxPrintDialogData printDialogData( * g_PrintData); + wxPrintDialogData printDialogData( * g_PrintData ); - wxPrinter printer(& printDialogData); + wxPrinter printer(& printDialogData ); -wxString title = BuildPrintTitle(); - EDA_Printout printout(this, m_Parent, title, print_ref); + wxString title = BuildPrintTitle(); + EDA_Printout printout( this, m_Parent, title, print_ref ); #ifndef __WINDOWS__ - wxDC * dc = printout.GetDC(); - ((wxPostScriptDC*)dc)->SetResolution(600); // Postscript DC resolution is 600 ppi + wxDC* dc = printout.GetDC(); + ( (wxPostScriptDC*) dc )->SetResolution( 600 ); // Postscript DC resolution is 600 ppi #endif - if (!printer.Print(this, &printout, TRUE)) - { - if (wxPrinter::GetLastError() == wxPRINTER_ERROR) - DisplayError(this, _("There was a problem printing") ); + if( !printer.Print( this, &printout, TRUE ) ) + { + if( wxPrinter::GetLastError() == wxPRINTER_ERROR ) + DisplayError( this, _( "There was a problem printing" ) ); return; - } - else - { - * g_PrintData = printer.GetPrintDialogData().GetPrintData(); - } + } + else + { + *g_PrintData = printer.GetPrintDialogData().GetPrintData(); + } } - /***************************************/ -bool EDA_Printout::OnPrintPage(int page) +bool EDA_Printout::OnPrintPage( int page ) /***************************************/ { -wxString msg; + wxString msg; - msg.Printf(_("Print page %d"), page); - m_Parent->Affiche_Message(msg); + msg.Printf( _( "Print page %d" ), page ); + m_Parent->Affiche_Message( msg ); #ifdef EESCHEMA -BASE_SCREEN * screen = m_Parent->GetScreen(); -BASE_SCREEN *oldscreen = screen; + BASE_SCREEN* screen = m_Parent->GetScreen(); + BASE_SCREEN* oldscreen = screen; - if( s_OptionPrintPage == 1 ) - { - EDA_ScreenList ScreenList; - screen = ScreenList.GetScreen(page -1); - } + if( s_OptionPrintPage == 1 ) + { + EDA_ScreenList ScreenList; + screen = ScreenList.GetScreen( page - 1 ); + } - if (screen == NULL) return FALSE; - ActiveScreen = (SCH_SCREEN*) screen; - DrawPage(); - ActiveScreen = (SCH_SCREEN*) oldscreen; + if( screen == NULL ) + return FALSE; + ActiveScreen = (SCH_SCREEN*) screen; + DrawPage(); + ActiveScreen = (SCH_SCREEN*) oldscreen; #endif #ifdef PCBNEW - if ( (m_Parent->m_Ident == PCB_FRAME) || (m_Parent->m_Ident == GERBER_FRAME) ) - { - m_PrintFrame->SetLayerMaskFromListSelection(); - if ( s_OptionPrintPage == 0 ) - { - // compute layer mask from page number - int ii, jj, mask = 1; - for ( ii = 0, jj = 0; ii < NB_LAYERS; ii++) - { - if ( s_PrintMaskLayer & mask ) jj++; - if ( jj == page ) - { - s_PrintMaskLayer = mask; - break; - } - mask <<= 1; - } - if ( ii == NB_LAYERS ) return FALSE; - } - } - DrawPage(); + if( (m_Parent->m_Ident == PCB_FRAME) || (m_Parent->m_Ident == GERBER_FRAME) ) + { + m_PrintFrame->SetLayerMaskFromListSelection(); + if( s_OptionPrintPage == 0 ) + { + // compute layer mask from page number + int ii, jj, mask = 1; + for( ii = 0, jj = 0; ii < NB_LAYERS; ii++ ) + { + if( s_PrintMaskLayer & mask ) + jj++; + if( jj == page ) + { + s_PrintMaskLayer = mask; + break; + } + mask <<= 1; + } + + if( ii == NB_LAYERS ) + return FALSE; + } + } + DrawPage(); #endif - return TRUE; + return TRUE; } + /*********************************************************/ -void EDA_Printout::GetPageInfo(int *minPage, int *maxPage, - int *selPageFrom, int *selPageTo) +void EDA_Printout::GetPageInfo( int* minPage, int* maxPage, + int* selPageFrom, int* selPageTo ) /*********************************************************/ { -int ii = 1; - *minPage = 1; - *selPageFrom = 1; + int ii = 1; + + *minPage = 1; + *selPageFrom = 1; #ifdef EESCHEMA - if( s_OptionPrintPage == 1 ) - { - EDA_ScreenList ScreenList; - ii = ScreenList.GetCount(); - } + if( s_OptionPrintPage == 1 ) + { + EDA_ScreenList ScreenList; + ii = ScreenList.GetCount(); + } #endif #ifdef PCBNEW - switch( s_OptionPrintPage ) - { - case 0 :ii = m_PrintFrame->SetLayerMaskFromListSelection(); - break; - case 1: - ii = 1; - break; - } + switch( s_OptionPrintPage ) + { + case 0: + ii = m_PrintFrame->SetLayerMaskFromListSelection(); + break; + + case 1: + ii = 1; + break; + } + #endif - *maxPage = ii; - *selPageTo = ii; + *maxPage = ii; + *selPageTo = ii; } /**************************************/ -bool EDA_Printout::HasPage(int pageNum) +bool EDA_Printout::HasPage( int pageNum ) /**************************************/ { #ifdef EESCHEMA -int PageCount; + int PageCount; - EDA_ScreenList ScreenList; - PageCount = ScreenList.GetCount(); - if( PageCount >= pageNum ) return TRUE; + EDA_ScreenList ScreenList; + PageCount = ScreenList.GetCount(); + if( PageCount >= pageNum ) + return TRUE; - return FALSE; + return FALSE; #endif #ifdef PCBNEW - return TRUE; + return TRUE; #endif } + /*************************************************************/ -bool EDA_Printout::OnBeginDocument(int startPage, int endPage) +bool EDA_Printout::OnBeginDocument( int startPage, int endPage ) /*************************************************************/ { - if (!wxPrintout::OnBeginDocument(startPage, endPage)) - return FALSE; + if( !wxPrintout::OnBeginDocument( startPage, endPage ) ) + return FALSE; - return TRUE; + return TRUE; } + /********************************/ void EDA_Printout::DrawPage() /********************************/ + /* - This is the real print function: print the active screen -*/ + * This is the real print function: print the active screen + */ { -int tmpzoom; -wxPoint tmp_startvisu; -wxSize PageSize_in_mm; -wxSize SheetSize; // Page size in internal units -wxSize PlotAreaSize; // plot area size in pixels -double scaleX, scaleY, scale; -wxPoint old_org; -wxPoint DrawOffset; // Offset de trace -double userscale; -int DrawZoom = 1; -wxDC * dc = GetDC(); - - s_PrintMirror = m_PrintFrame->m_Print_Mirror->GetValue(); - - wxBusyCursor dummy; + int tmpzoom; + wxPoint tmp_startvisu; + wxSize PageSize_in_mm; + wxSize SheetSize; // Page size in internal units + wxSize PlotAreaSize; // plot area size in pixels + double scaleX, scaleY, scale; + wxPoint old_org; + wxPoint DrawOffset; // Offset de trace + double userscale; + int DrawZoom = 1; + wxDC* dc = GetDC(); - GetPageSizeMM(&PageSize_in_mm.x, &PageSize_in_mm.y); + s_PrintMirror = m_PrintFrame->m_Print_Mirror->GetValue(); - /* Save old draw scale and draw offset */ - tmp_startvisu = ActiveScreen->m_StartVisu; - tmpzoom = ActiveScreen->GetZoom(); - old_org = ActiveScreen->m_DrawOrg; - /* Change draw scale and offset to draw the whole page */ - ActiveScreen->SetZoom(DrawZoom); - ActiveScreen->m_DrawOrg.x = ActiveScreen->m_DrawOrg.y = 0; - ActiveScreen->m_StartVisu.x = ActiveScreen->m_StartVisu.y = 0; + wxBusyCursor dummy; - SheetSize = ActiveScreen->m_CurrentSheetDesc->m_Size; // size in 1/1000 inch - SheetSize.x *= m_Parent->m_InternalUnits / 1000; - SheetSize.y *= m_Parent->m_InternalUnits / 1000; // size in pixels + GetPageSizeMM( &PageSize_in_mm.x, &PageSize_in_mm.y ); - // Get the size of the DC in pixels - dc->GetSize(&PlotAreaSize.x, &PlotAreaSize.y); + /* Save old draw scale and draw offset */ + tmp_startvisu = ActiveScreen->m_StartVisu; + tmpzoom = ActiveScreen->GetZoom(); + old_org = ActiveScreen->m_DrawOrg; + /* Change draw scale and offset to draw the whole page */ + ActiveScreen->SetZoom( DrawZoom ); + ActiveScreen->m_DrawOrg.x = ActiveScreen->m_DrawOrg.y = 0; + ActiveScreen->m_StartVisu.x = ActiveScreen->m_StartVisu.y = 0; + + SheetSize = ActiveScreen->m_CurrentSheetDesc->m_Size; // size in 1/1000 inch + SheetSize.x *= m_Parent->m_InternalUnits / 1000; + SheetSize.y *= m_Parent->m_InternalUnits / 1000; // size in pixels + + // Get the size of the DC in pixels + dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y ); #ifdef PCBNEW - WinEDA_BasePcbFrame * pcbframe = (WinEDA_BasePcbFrame*) m_Parent; - pcbframe->m_Pcb->ComputeBoundaryBox(); - /* Compute the PCB size in internal units*/ - userscale = s_ScaleList[s_Scale_Select]; - if (userscale == 0) // fit in page - { - int extra_margin = 8000; // Margin = 8000/2 units pcb = 0,4 inch - SheetSize.x = pcbframe->m_Pcb->m_BoundaryBox.GetWidth() + extra_margin; - SheetSize.y = pcbframe->m_Pcb->m_BoundaryBox.GetHeight() + extra_margin; - userscale = 0.99; - } + WinEDA_BasePcbFrame* pcbframe = (WinEDA_BasePcbFrame*) m_Parent; + pcbframe->m_Pcb->ComputeBoundaryBox(); + /* Compute the PCB size in internal units*/ + userscale = s_ScaleList[s_Scale_Select]; + if( userscale == 0 ) // fit in page + { + int extra_margin = 8000; // Margin = 8000/2 units pcb = 0,4 inch + SheetSize.x = pcbframe->m_Pcb->m_BoundaryBox.GetWidth() + extra_margin; + SheetSize.y = pcbframe->m_Pcb->m_BoundaryBox.GetHeight() + extra_margin; + userscale = 0.99; + } - if ( (s_ScaleList[s_Scale_Select] > 1.0) || // scale > 1 -> Recadrage - (s_ScaleList[s_Scale_Select] == 0) ) // fit in page - { - DrawOffset.x += pcbframe->m_Pcb->m_BoundaryBox.Centre().x; - DrawOffset.y += pcbframe->m_Pcb->m_BoundaryBox.Centre().y; - } + if( (s_ScaleList[s_Scale_Select] > 1.0) // scale > 1 -> Recadrage + || (s_ScaleList[s_Scale_Select] == 0) ) // fit in page + { + DrawOffset.x += pcbframe->m_Pcb->m_BoundaryBox.Centre().x; + DrawOffset.y += pcbframe->m_Pcb->m_BoundaryBox.Centre().y; + } #else - userscale = 1; + userscale = 1; #endif - // Calculate a suitable scaling factor - scaleX = (double)SheetSize.x / PlotAreaSize.x; - scaleY = (double)SheetSize.y / PlotAreaSize.y; - scale = wxMax(scaleX,scaleY) / userscale; // Use x or y scaling factor, whichever fits on the DC + // Calculate a suitable scaling factor + scaleX = (double) SheetSize.x / PlotAreaSize.x; + scaleY = (double) SheetSize.y / PlotAreaSize.y; + scale = wxMax( scaleX, scaleY ) / userscale; // Use x or y scaling factor, whichever fits on the DC - // ajust the real draw scale + // ajust the real draw scale #ifdef PCBNEW -double accurate_Xscale, accurate_Yscale; - dc->SetUserScale(DrawZoom / scale * m_PrintFrame->m_XScaleAdjust, - DrawZoom / scale * m_PrintFrame->m_YScaleAdjust); - // Compute Accurate scale 1 - { - int w, h; - GetPPIPrinter(&w, &h); - accurate_Xscale = ((double)(DrawZoom * w))/ PCB_INTERNAL_UNIT; - accurate_Yscale = ((double)(DrawZoom * h))/ PCB_INTERNAL_UNIT; - if ( IsPreview() ) // Scale must take in account the DC size in Preview - { - // Get the size of the DC in pixels - dc->GetSize(&PlotAreaSize.x, &PlotAreaSize.y); - GetPageSizePixels(&w, &h); - accurate_Xscale *= PlotAreaSize.x; accurate_Xscale /= w; - accurate_Yscale *= PlotAreaSize.y; accurate_Yscale /= h; - } - accurate_Xscale *= m_PrintFrame->m_XScaleAdjust; - accurate_Yscale *= m_PrintFrame->m_YScaleAdjust; - } + double accurate_Xscale, accurate_Yscale; + dc->SetUserScale( DrawZoom / scale * m_PrintFrame->m_XScaleAdjust, + DrawZoom / scale * m_PrintFrame->m_YScaleAdjust ); + + // Compute Accurate scale 1 + { + int w, h; + GetPPIPrinter( &w, &h ); + accurate_Xscale = ( (double) (DrawZoom * w) ) / PCB_INTERNAL_UNIT; + accurate_Yscale = ( (double) (DrawZoom * h) ) / PCB_INTERNAL_UNIT; + if( IsPreview() ) // Scale must take in account the DC size in Preview + { + // Get the size of the DC in pixels + dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y ); + GetPageSizePixels( &w, &h ); + accurate_Xscale *= PlotAreaSize.x; accurate_Xscale /= w; + accurate_Yscale *= PlotAreaSize.y; accurate_Yscale /= h; + } + accurate_Xscale *= m_PrintFrame->m_XScaleAdjust; + accurate_Yscale *= m_PrintFrame->m_YScaleAdjust; + } #else - dc->SetUserScale(DrawZoom / scale, DrawZoom / scale); + dc->SetUserScale( DrawZoom / scale, DrawZoom / scale ); #endif #ifdef PCBNEW - if ( (s_ScaleList[s_Scale_Select] > 1.0) || // scale > 1 -> Recadrage - (s_ScaleList[s_Scale_Select] == 0) ) // fit in page - { - DrawOffset.x -= (int)( (PlotAreaSize.x/2) * scale); - DrawOffset.y -= (int)( (PlotAreaSize.y/3) * scale); - } - DrawOffset.x += (int)( (SheetSize.x/2) * (m_PrintFrame->m_XScaleAdjust -1.0)); - DrawOffset.y += (int)( (SheetSize.y/2) * (m_PrintFrame->m_YScaleAdjust -1.0)); + if( (s_ScaleList[s_Scale_Select] > 1.0) // scale > 1 -> Recadrage + || (s_ScaleList[s_Scale_Select] == 0) ) // fit in page + { + DrawOffset.x -= (int) ( (PlotAreaSize.x / 2) * scale ); + DrawOffset.y -= (int) ( (PlotAreaSize.y / 3) * scale ); + } + DrawOffset.x += (int) ( (SheetSize.x / 2) * (m_PrintFrame->m_XScaleAdjust - 1.0) ); + DrawOffset.y += (int) ( (SheetSize.y / 2) * (m_PrintFrame->m_YScaleAdjust - 1.0) ); #endif - ActiveScreen->m_DrawOrg = DrawOffset; + ActiveScreen->m_DrawOrg = DrawOffset; - GRResetPenAndBrush(dc); - if( s_Print_Black_and_White ) GRForceBlackPen(TRUE); + GRResetPenAndBrush( dc ); + if( s_Print_Black_and_White ) + GRForceBlackPen( TRUE ); #ifdef EESCHEMA - /* set Pen min width */ -double ftmp, xdcscale, ydcscale; - // s_PrintPenMinWidth is in internal units ( 1/1000 inch), and must be converted in pixels - ftmp = (float)s_PrintPenMinWidth * 25.4 / EESCHEMA_INTERNAL_UNIT; // ftmp est en mm - ftmp *= (float)PlotAreaSize.x / PageSize_in_mm.x; /* ftmp is in pixels */ - /* because the pen size will be scaled by the dc scale, we modify the size - in order to keep the requested value */ - dc->GetUserScale(&xdcscale, &ydcscale); - ftmp /= xdcscale; - SetPenMinWidth((int)round(ftmp)); + /* set Pen min width */ + double ftmp, xdcscale, ydcscale; + + // s_PrintPenMinWidth is in internal units ( 1/1000 inch), and must be converted in pixels + ftmp = (float) s_PrintPenMinWidth * 25.4 / EESCHEMA_INTERNAL_UNIT; // ftmp est en mm + ftmp *= (float) PlotAreaSize.x / PageSize_in_mm.x; /* ftmp is in pixels */ + + /* because the pen size will be scaled by the dc scale, we modify the size + * in order to keep the requested value */ + dc->GetUserScale( &xdcscale, &ydcscale ); + ftmp /= xdcscale; + SetPenMinWidth( (int) round( ftmp ) ); #else - SetPenMinWidth(1); // min width = 1 pixel + SetPenMinWidth( 1 ); // min width = 1 pixel #endif -WinEDA_DrawPanel * panel = m_Parent->DrawPanel; -EDA_Rect tmp = panel->m_ClipBox; + WinEDA_DrawPanel* panel = m_Parent->DrawPanel; + EDA_Rect tmp = panel->m_ClipBox; - panel->m_ClipBox.SetOrigin(wxPoint(0,0)); - panel->m_ClipBox.SetSize(wxSize(0x7FFFFF0, 0x7FFFFF0)); + panel->m_ClipBox.SetOrigin( wxPoint( 0, 0 ) ); + panel->m_ClipBox.SetSize( wxSize( 0x7FFFFF0, 0x7FFFFF0 ) ); - g_IsPrinting = TRUE; + g_IsPrinting = TRUE; #ifdef EESCHEMA - if( s_Print_Black_and_White ) - g_PrintFillMask = FILLED_WITH_BG_BODYCOLOR; + if( s_Print_Black_and_White ) + g_PrintFillMask = FILLED_WITH_BG_BODYCOLOR; #endif #ifdef PCBNEW - if ( m_Print_Sheet_Ref ) - m_Parent->TraceWorkSheet( dc, ActiveScreen, 0); + if( m_Print_Sheet_Ref ) + m_Parent->TraceWorkSheet( dc, ActiveScreen, 0 ); - if ( userscale == 1.0 ) // Draw the Sheet refs at optimum scale, and board at 1.0 scale - { - m_Print_Sheet_Ref = FALSE; - dc->SetUserScale( accurate_Yscale, accurate_Yscale); - } + if( userscale == 1.0 ) // Draw the Sheet refs at optimum scale, and board at 1.0 scale + { + m_Print_Sheet_Ref = FALSE; + dc->SetUserScale( accurate_Yscale, accurate_Yscale ); + } - if ( s_PrintMirror ) - { // To plot mirror, we revere the y axis, and modify the plot y origin - double sx, sy; - - dc->GetUserScale(&sx, &sy); - dc->SetAxisOrientation(TRUE, TRUE); - if ( userscale < 1.0 ) sy /= userscale; - /* Plot offset y is moved by the y plot area size in order to have - the old draw area in the new draw area, because the draw origin has not moved - (this is the upper left corner) but the Y axis is reversed, therefore the plotting area - is the y coordinate values from - PlotAreaSize.y to 0 */ - int ysize = (int)( PlotAreaSize.y / sy ); - DrawOffset.y += ysize; - /* in order to keep the board position in the sheet - (when user scale <= 1) the y offset in moved by the distance between - the middle of the page and the middle of the board - This is equivalent to put the mirror axis to the board centre - for scales > 1, the DrawOffset was already computed to have the board centre - to the middle of the page. - */ - wxPoint pcb_centre = pcbframe->m_Pcb->m_BoundaryBox.Centre(); - if ( userscale <= 1.0 ) - DrawOffset.y += pcb_centre.y - (ysize/2); - ActiveScreen->m_DrawOrg = DrawOffset; - panel->m_ClipBox.SetOrigin(wxPoint(-0x7FFFFF,-0x7FFFFF)); - } + if( s_PrintMirror ) + { // To plot mirror, we revere the y axis, and modify the plot y origin + double sx, sy; - panel->PrintPage(dc, 0, s_PrintMaskLayer); + dc->GetUserScale( &sx, &sy ); + dc->SetAxisOrientation( TRUE, TRUE ); + if( userscale < 1.0 ) + sy /= userscale; + + /* Plot offset y is moved by the y plot area size in order to have + * the old draw area in the new draw area, because the draw origin has not moved + * (this is the upper left corner) but the Y axis is reversed, therefore the plotting area + * is the y coordinate values from - PlotAreaSize.y to 0 */ + int ysize = (int) ( PlotAreaSize.y / sy ); + DrawOffset.y += ysize; + + /* in order to keep the board position in the sheet + * (when user scale <= 1) the y offset in moved by the distance between + * the middle of the page and the middle of the board + * This is equivalent to put the mirror axis to the board centre + * for scales > 1, the DrawOffset was already computed to have the board centre + * to the middle of the page. + */ + wxPoint pcb_centre = pcbframe->m_Pcb->m_BoundaryBox.Centre(); + if( userscale <= 1.0 ) + DrawOffset.y += pcb_centre.y - (ysize / 2); + ActiveScreen->m_DrawOrg = DrawOffset; + panel->m_ClipBox.SetOrigin( wxPoint( -0x7FFFFF, -0x7FFFFF ) ); + } + + panel->PrintPage( dc, 0, s_PrintMaskLayer ); #else - panel->PrintPage(dc, m_Print_Sheet_Ref, s_PrintMaskLayer); + panel->PrintPage( dc, m_Print_Sheet_Ref, s_PrintMaskLayer ); #endif #ifdef EESCHEMA - g_PrintFillMask = 0; + g_PrintFillMask = 0; #endif - g_IsPrinting = FALSE; - panel->m_ClipBox = tmp; + g_IsPrinting = FALSE; + panel->m_ClipBox = tmp; - SetPenMinWidth(1); - GRForceBlackPen(FALSE); + SetPenMinWidth( 1 ); + GRForceBlackPen( FALSE ); - ActiveScreen->m_StartVisu = tmp_startvisu; - ActiveScreen->m_DrawOrg = old_org; - ActiveScreen->SetZoom(tmpzoom); + ActiveScreen->m_StartVisu = tmp_startvisu; + ActiveScreen->m_DrawOrg = old_org; + ActiveScreen->SetZoom( tmpzoom ); } -