diff --git a/translation/pofiles/ru.po b/translation/pofiles/ru.po
index 4d43074c7f..3695f23291 100644
--- a/translation/pofiles/ru.po
+++ b/translation/pofiles/ru.po
@@ -22,8 +22,8 @@ msgstr ""
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
-"n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
 "X-Generator: Weblate 4.16-dev\n"
 "X-Poedit-KeywordsList: _;_HKI\n"
 "X-Poedit-Basepath: ../../kicad\n"
@@ -7990,12 +7990,12 @@ msgid ""
 "python <script file name> <input filename> <output filename>\n"
 "```\n"
 "\n"
-"On Windows, if the desired generator script for a CSV BOM is `C:"
-"\\Users\\username\\kicad\\my_python_script.py`, the command line would be:\n"
+"On Windows, if the desired generator script for a CSV BOM is `C:\\Users"
+"\\username\\kicad\\my_python_script.py`, the command line would be:\n"
 "\n"
 "```\n"
-"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O."
-"csv\"\n"
+"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O.csv"
+"\"\n"
 "```\n"
 "\n"
 "On Linux, if the desired generator script for a CSV BOM is `/home/username/"
@@ -8070,13 +8070,12 @@ msgstr ""
 "python <имя файла скрипта> <имя входного файла> <имя выходного файла>\n"
 "```\n"
 "\n"
-"В Windows, если желаемый скрипт генератора для CSV BOM - `C:"
-"\\Users\\username\\kicad\\my_python_script.py`, командная строка будет "
-"такой:\n"
+"В Windows, если желаемый скрипт генератора для CSV BOM - `C:\\Users\\username"
+"\\kicad\\my_python_script.py`, командная строка будет такой:\n"
 "\n"
 "```\n"
-"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O."
-"csv\"\n"
+"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O.csv"
+"\"\n"
 "```\n"
 "\n"
 "В Linux, если желаемый скрипт генератора для CSV BOM - `/home/username/kicad/"
@@ -11551,9 +11550,9 @@ msgstr ""
 "библиотек. KiCad попытается переназначить существующим символам библиотеки "
 "из новой таблицы библиотек. Внесённые изменения коснуться файлов проекта и "
 "схема станет не совместимой с предыдущими версиями KiCad. Для всех файлов, "
-"подлежащих изменению, будут созданы резервные копии в каталоге "
-"\"remap_backup\", что позволит отменить внесённые изменения. Если пропустить "
-"этот шаг, придётся переопределять символы вручную."
+"подлежащих изменению, будут созданы резервные копии в каталоге \"remap_backup"
+"\", что позволит отменить внесённые изменения. Если пропустить этот шаг, "
+"придётся переопределять символы вручную."
 
 #: eeschema/dialogs/dialog_symbol_remap.cpp:208
 #, c-format
@@ -16301,8 +16300,8 @@ msgstr ""
 #: eeschema/symbol_checker.cpp:146
 #, c-format
 msgid ""
-"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
-"%s%s at location <b>(%s, %s)</b>."
+"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin %s"
+"%s at location <b>(%s, %s)</b>."
 msgstr ""
 "<b>Вывод-дубликат %s</b> %s с координатами <b>(%s, %s)</b>, конфликтует с "
 "выводом %s%s, координаты <b>(%s, %s)</b>."
@@ -16310,8 +16309,8 @@ msgstr ""
 #: eeschema/symbol_checker.cpp:159
 #, c-format
 msgid ""
-"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
-"%s%s at location <b>(%s, %s)</b> in units %s and %s."
+"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin %s"
+"%s at location <b>(%s, %s)</b> in units %s and %s."
 msgstr ""
 "<b>Вывод-дубликат %s</b> %s с координатами <b>(%s, %s)</b>, конфликтует с "
 "выводом %s%s, координаты <b>(%s, %s)</b> в частях %s и %s."
@@ -19825,8 +19824,8 @@ msgstr "Сформировать файл позиций"
 #: kicad/cli/command_export_pcb_pos.cpp:49
 msgid "Valid options: front,back,both. Gerber format only supports \"both\"."
 msgstr ""
-"Возможные варианты: front,back,both. Формат Gerber поддерживает только "
-"\"both\"."
+"Возможные варианты: front,back,both. Формат Gerber поддерживает только \"both"
+"\"."
 
 #: kicad/cli/command_export_pcb_pos.cpp:53
 msgid "Valid options: ascii,csv,gerber"
@@ -19948,9 +19947,8 @@ msgid "Schematic file does not exist or is not accessible\n"
 msgstr "Файл схемы не существует или недоступен\n"
 
 #: kicad/cli/command_export_sch_pdf.cpp:38
-#, fuzzy
 msgid "Color theme to use (will default to schematic settings)"
-msgstr "Цветовая тема (по умолчанию берется из редактора плат)"
+msgstr "Цветовая тема (по умолчанию берется из редактора схем)"
 
 #: kicad/cli/command_export_sch_pdf.cpp:51
 #: kicad/cli/command_export_sch_svg.cpp:51
@@ -31720,13 +31718,13 @@ msgid ""
 "\n"
 "    (rule \"Distance between Vias of Different Nets\"\n"
 "        (constraint hole_to_hole (min 0.254mm))\n"
-"        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B."
-"Net\"))\n"
+"        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B.Net"
+"\"))\n"
 "\n"
 "    (rule \"Clearance between Pads of Different Nets\"\n"
 "        (constraint clearance (min 3.0mm))\n"
-"        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B."
-"Net\"))\n"
+"        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B.Net"
+"\"))\n"
 "\n"
 "\n"
 "    (rule \"Via Hole to Track Clearance\"\n"
@@ -32048,13 +32046,13 @@ msgstr ""
 "\n"
 "    (rule \"Distance between Vias of Different Nets\"\n"
 "        (constraint hole_to_hole (min 0.254mm))\n"
-"        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B."
-"Net\"))\n"
+"        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B.Net"
+"\"))\n"
 "\n"
 "    (rule \"Clearance between Pads of Different Nets\"\n"
 "        (constraint clearance (min 3.0mm))\n"
-"        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B."
-"Net\"))\n"
+"        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B.Net"
+"\"))\n"
 "\n"
 "\n"
 "    (rule \"Via Hole to Track Clearance\"\n"
@@ -32091,8 +32089,8 @@ msgstr ""
 "        (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
 "\n"
 "\n"
-"    # Исключить терморазгрузку на конт.пл. с параметром \"для отвода "
-"тепла\"\n"
+"    # Исключить терморазгрузку на конт.пл. с параметром \"для отвода тепла"
+"\"\n"
 "    (rule heat_sink_pad\n"
 "        (constraint zone_connection solid)\n"
 "        (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
@@ -33472,8 +33470,8 @@ msgid ""
 "This may result in different fills from previous KiCad versions which used "
 "the line thicknesses of the board boundary on the Edge Cuts layer."
 msgstr ""
-"Если перезалить зоны меди, то будет использован параметр \"Зазор у края "
-"платы\" (см. Параметры платы > Правила проектирования > Ограничения).\n"
+"Если перезалить зоны меди, то будет использован параметр \"Зазор у края платы"
+"\" (см. Параметры платы > Правила проектирования > Ограничения).\n"
 "При этом новая форма зоны может отличаться от той, что была сделана в "
 "предыдущих версиях KiCad, где в качестве зазора использовалась толщина "
 "контура платы."
@@ -41142,6 +41140,672 @@ msgstr "Схема KiCad"
 msgid "KiCad Printed Circuit Board"
 msgstr "Печатная плата KiCad"
 
+#: eeschema/sim/kibis/ibis_parser.cpp:613
+#, fuzzy
+msgid "Checking Header... "
+msgstr "Проверка заголовка..."
+
+#: pcbnew/dialogs/panel_setup_rules_help_md.h:2
+#, fuzzy
+msgid ""
+"### Top-level Clauses\n"
+"\n"
+"    (version <number>)\n"
+"\n"
+"    (rule <rule_name> <rule_clause> ...)\n"
+"\n"
+"\n"
+"<br>\n"
+"\n"
+"### Rule Clauses\n"
+"\n"
+"    (constraint <constraint_type> ...)\n"
+"\n"
+"    (condition \"<expression>\")\n"
+"\n"
+"    (layer \"<layer_name>\")\n"
+"\n"
+"    (severity <severity_name>)\n"
+"\n"
+"\n"
+"<br>\n"
+"\n"
+"### Constraint Types\n"
+"\n"
+" * annular\\_width\n"
+" * assertion\n"
+" * clearance\n"
+" * connection\\_width\n"
+" * courtyard_clearance\n"
+" * diff\\_pair\\_gap\n"
+" * diff\\_pair\\_uncoupled\n"
+" * disallow\n"
+" * edge\\_clearance\n"
+" * length\n"
+" * hole\\_clearance\n"
+" * hole\\_size\n"
+" * min\\_resolved\\_spokes\n"
+" * physical\\_clearance\n"
+" * physical\\_hole\\_clearance\n"
+" * silk\\_clearance\n"
+" * skew\n"
+" * text\\_height\n"
+" * text\\_thickness\n"
+" * thermal\\_relief\\_gap\n"
+" * thermal\\_spoke\\_width\n"
+" * track\\_width\n"
+" * via\\_count\n"
+" * via\\_diameter\n"
+" * zone\\_connection\n"
+"\n"
+"Note: `clearance` and `hole_clearance` rules are not run against items of "
+"the same net; `physical_clearance` and `physical_hole_clearance` rules are.\n"
+"<br><br>\n"
+"\n"
+"### Items\n"
+"\n"
+" * `A` &nbsp;&nbsp; _the first (or only) item under test_\n"
+" * `B` &nbsp;&nbsp; _the second item under test (for binary tests)_\n"
+" * `L` &nbsp;&nbsp; _the layer currently under test_\n"
+"\n"
+"<br>\n"
+"\n"
+"### Item Types\n"
+"\n"
+" * buried\\_via\n"
+" * graphic\n"
+" * hole\n"
+" * micro\\_via\n"
+" * pad\n"
+" * text\n"
+" * track\n"
+" * via\n"
+" * zone\n"
+"\n"
+"<br>\n"
+"\n"
+"### Zone Connections\n"
+"\n"
+" * solid\n"
+" * thermal\\_reliefs\n"
+" * none\n"
+"\n"
+"<br>\n"
+"\n"
+"### Severity Names\n"
+"\n"
+" * warning\n"
+" * error\n"
+" * exclusion\n"
+" * ignore\n"
+"\n"
+"<br>\n"
+"\n"
+"### Examples\n"
+"\n"
+"    (version 1)\n"
+"\n"
+"    (rule HV\n"
+"       (constraint clearance (min 1.5mm))\n"
+"       (condition \"A.NetClass == 'HV'\"))\n"
+"\n"
+"\n"
+"    (rule HV\n"
+"       (layer outer)\n"
+"       (constraint clearance (min 1.5mm))\n"
+"       (condition \"A.NetClass == 'HV'\"))\n"
+"\n"
+"\n"
+"    (rule HV_HV\n"
+"       # wider clearance between HV tracks\n"
+"       (constraint clearance (min \"1.5mm + 2.0mm\"))\n"
+"       (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n"
+"\n"
+"\n"
+"    (rule HV_unshielded\n"
+"       (constraint clearance (min 2mm))\n"
+"       (condition \"A.NetClass == 'HV' && !A.enclosedByArea('Shield*')\"))\n"
+"\n"
+"\n"
+"    (rule heavy_thermals\n"
+"       (constraint thermal_spoke_width (min 0.5mm))\n"
+"       (condition \"A.NetClass == 'HV'\"))\n"
+"<br><br>\n"
+"\n"
+"### Notes\n"
+"\n"
+"Version clause must be the first clause.  It indicates the syntax version of "
+"the file so that \n"
+"future rules parsers can perform automatic updates.  It should be\n"
+"set to \"1\".\n"
+"\n"
+"Rules should be ordered by specificity.  Later rules take\n"
+"precedence over earlier rules; once a matching rule is found\n"
+"no further rules will be checked.\n"
+"\n"
+"Use Ctrl+/ to comment or uncomment line(s).\n"
+"<br><br><br>\n"
+"\n"
+"### Expression functions\n"
+"\n"
+"All function parameters support simple wildcards (`*` and `?`).\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsCourtyard('<footprint_refdes>')\n"
+"True if any part of `A` lies within the given footprint's principal "
+"courtyard.\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsFrontCourtyard('<footprint_refdes>')\n"
+"True if any part of `A` lies within the given footprint's front courtyard.\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsBackCourtyard('<footprint_refdes>')\n"
+"True if any part of `A` lies within the given footprint's back courtyard.\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsArea('<zone_name>')\n"
+"True if any part of `A` lies within the given zone's outline.\n"
+"<br><br>\n"
+"\n"
+"    A.enclosedByArea('<zone_name>')\n"
+"True if all of `A` lies within the given zone's outline.  \n"
+"\n"
+"NB: this is potentially a more expensive call than `intersectsArea()`.  Use "
+"`intersectsArea()` \n"
+"where possible.\n"
+"<br><br>\n"
+"\n"
+"    A.isPlated()\n"
+"True if `A` has a hole which is plated.\n"
+"<br><br>\n"
+"\n"
+"    A.inDiffPair('<net_name>')\n"
+"True if `A` has a net that is part of the specified differential pair.\n"
+"`<net_name>` is the base name of the differential pair.  For example, "
+"`inDiffPair('/CLK')`\n"
+"matches items in the `/CLK_P` and `/CLK_N` nets.\n"
+"<br><br>\n"
+"\n"
+"    AB.isCoupledDiffPair()\n"
+"True if `A` and `B` are members of the same diff pair.\n"
+"<br><br>\n"
+"\n"
+"    A.memberOf('<group_name>')\n"
+"True if `A` is a member of the given group. Includes nested membership.\n"
+"<br><br>\n"
+"\n"
+"    A.existsOnLayer('<layer_name>')\n"
+"True if `A` exists on the given layer.  The layer name can be\n"
+"either the name assigned in Board Setup > Board Editor Layers or\n"
+"the canonical name (ie: `F.Cu`).\n"
+"\n"
+"NB: this returns true if `A` is on the given layer, independently\n"
+"of whether or not the rule is being evaluated for that layer.\n"
+"For the latter use a `(layer \"layer_name\")` clause in the rule.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideCourtyard('<footprint_refdes>') !!!\n"
+"Deprecated; use `intersectsCourtyard()` instead.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideFrontCourtyard('<footprint_refdes>') !!!\n"
+"Deprecated; use `intersectsFrontCourtyard()` instead.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideBackCourtyard('<footprint_refdes>') !!!\n"
+"Deprecated; use `intersectsBackCourtyard()` instead.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideArea('<zone_name>') !!!\n"
+"Deprecated; use `intersectsArea()` instead.\n"
+"<br><br><br>\n"
+"\n"
+"### More Examples\n"
+"\n"
+"    (rule \"copper keepout\"\n"
+"       (constraint disallow track via zone)\n"
+"       (condition \"A.intersectsArea('zone3')\"))\n"
+"\n"
+"\n"
+"    (rule \"BGA neckdown\"\n"
+"       (constraint track_width (min 0.2mm) (opt 0.25mm))\n"
+"       (constraint clearance (min 0.05mm) (opt 0.08mm))\n"
+"       (condition \"A.intersectsCourtyard('U3')\"))\n"
+"\n"
+"\n"
+"    # prevent silk over tented vias\n"
+"    (rule silk_over_via\n"
+"       (constraint silk_clearance (min 0.2mm))\n"
+"       (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n"
+"\n"
+"\n"
+"    (rule \"Distance between Vias of Different Nets\"\n"
+"        (constraint hole_to_hole (min 0.254mm))\n"
+"        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B.Net"
+"\"))\n"
+"\n"
+"    (rule \"Clearance between Pads of Different Nets\"\n"
+"        (constraint clearance (min 3.0mm))\n"
+"        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B.Net"
+"\"))\n"
+"\n"
+"\n"
+"    (rule \"Via Hole to Track Clearance\"\n"
+"        (constraint hole_clearance (min 0.254mm))\n"
+"        (condition \"A.Type == 'Via' && B.Type == 'Track'\"))\n"
+"\n"
+"    (rule \"Pad to Track Clearance\"\n"
+"        (constraint clearance (min 0.2mm))\n"
+"        (condition \"A.Type == 'Pad' && B.Type == 'Track'\"))\n"
+"\n"
+"\n"
+"    (rule \"clearance-to-1mm-cutout\"\n"
+"        (constraint clearance (min 0.8mm))\n"
+"        (condition \"A.Layer == 'Edge.Cuts' && A.Thickness == 1.0mm\"))\n"
+"\n"
+"\n"
+"    (rule \"Max Drill Hole Size Mechanical\"\n"
+"        (constraint hole_size (max 6.3mm))\n"
+"        (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n"
+"\n"
+"    (rule \"Max Drill Hole Size PTH\"\n"
+"        (constraint hole_size (max 6.35mm))\n"
+"        (condition \"A.Pad_Type == 'Through-hole'\"))\n"
+"\n"
+"\n"
+"    # Specify an optimal gap for a particular diff-pair\n"
+"    (rule \"dp clock gap\"\n"
+"        (constraint diff_pair_gap (opt \"0.8mm\"))\n"
+"        (condition \"A.inDiffPair('/CLK')\"))\n"
+"\n"
+"    # Specify a larger clearance around any diff-pair\n"
+"    (rule \"dp clearance\"\n"
+"        (constraint clearance (min \"1.5mm\"))\n"
+"        (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
+"\n"
+"\n"
+"    # Don't use thermal reliefs on heatsink pads\n"
+"    (rule heat_sink_pad\n"
+"        (constraint zone_connection solid)\n"
+"        (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
+"\n"
+"    # Require all four thermal relief spokes to connect to parent zone\n"
+"    (rule fully_spoked_pads\n"
+"        (constraint min_resolved_spokes 4))\n"
+"\n"
+"    # Set thermal relief gap & spoke width for all zones\n"
+"    (rule defined_relief\n"
+"        (constraint thermal_relief_gap (min 10mil))\n"
+"        (constraint thermal_spoke_width (min 12mil)))\n"
+"\n"
+"    # Override thermal relief gap & spoke width for GND and PWR zones\n"
+"    (rule defined_relief_pwr\n"
+"        (constraint thermal_relief_gap (min 10mil))\n"
+"        (constraint thermal_spoke_width (min 12mil))\n"
+"        (condition \"A.Name == 'zone_GND' || A.Name == 'zone_PWR'\"))\n"
+"\n"
+"\n"
+"    # Prevent solder wicking from SMD pads\n"
+"    (rule holes_in_pads\n"
+"        (constraint physical_hole_clearance (min 0.2mm))\n"
+"        (condition \"B.Pad_Type == 'SMD'\"))\n"
+"\n"
+"    # Disallow solder mask margin overrides\n"
+"    (rule \"disallow solder mask margin overrides\"\n"
+"        (constraint assertion \"A.Soldermask_Margin_Override == 0mm\")\n"
+"        (condition \"A.Type == 'Pad'\"))\n"
+"\n"
+"\n"
+"    # Enforce a mechanical clearance between components and board edge\n"
+"    (rule front_mechanical_board_edge_clearance\n"
+"        (layer \"F.Courtyard\")\n"
+"        (constraint physical_clearance (min 3mm))\n"
+"        (condition \"B.Layer == 'Edge.Cuts'\"))\n"
+"\n"
+"\n"
+"    # Check current-carrying capacity\n"
+"    (rule high-current\n"
+"        (constraint track_width (min 1.0mm))\n"
+"        (constraint connection_width (min 0.8mm))\n"
+"        (condition \"A.NetClass == 'Power'\"))\n"
+"\n"
+"### Documentation\n"
+"\n"
+"For the full documentation see [https://docs.kicad.org](https://docs.kicad."
+"org/GetMajorMinorVersion/pcbnew/#custom_design_rules)."
+msgstr ""
+"### Определения верхнего уровня\n"
+"\n"
+"    (version <number>)\n"
+"\n"
+"    (rule <rule_name> <rule_clause> ...)\n"
+"\n"
+"\n"
+"<br><br>\n"
+"\n"
+"### Определения правил\n"
+"\n"
+"    (constraint <constraint_type> ...)\n"
+"\n"
+"    (condition \"<expression>\")\n"
+"\n"
+"    (layer \"<layer_name>\")\n"
+"\n"
+"    (severity <severity_name>)\n"
+"\n"
+"\n"
+"<br><br>\n"
+"\n"
+"### Типы ограничений\n"
+"\n"
+" * annular\\_width\n"
+" * assertion\n"
+" * clearance\n"
+" * connection\\_width\n"
+" * courtyard_clearance\n"
+" * diff\\_pair\\_gap\n"
+" * diff\\_pair\\_uncoupled\n"
+" * disallow\n"
+" * edge\\_clearance\n"
+" * length\n"
+" * hole\\_clearance\n"
+" * hole\\_size\n"
+" * min\\_resolved\\_spokes\n"
+" * physical\\_clearance\n"
+" * physical\\_hole\\_clearance\n"
+" * silk\\_clearance\n"
+" * skew\n"
+" * text\\_height\n"
+" * text\\_thickness\n"
+" * thermal\\_relief\\_gap\n"
+" * thermal\\_spoke\\_width\n"
+" * track\\_width\n"
+" * via\\_count\n"
+" * via\\_diameter\n"
+" * zone\\_connection\n"
+"\n"
+"Примечание: правила `clearance` и `hole_clearance` не применяются к "
+"элементам одной цепи; `physical_clearance` и `physical_hole_clearance` "
+"применяются.\n"
+"<br><br>\n"
+"\n"
+"### Элементы\n"
+"\n"
+" * `A` &nbsp;&nbsp; _первый (или единственный) тестируемый элемент_\n"
+" * `B` &nbsp;&nbsp; _второй тестируемый элемент (для бинарных тестов)_\n"
+" * `L` &nbsp;&nbsp; _текущий тестируемый слой_.\n"
+"\n"
+"<br>\n"
+"\n"
+"### Типы элементов\n"
+"\n"
+" * buried\\_via\n"
+" * graphic\n"
+" * hole\n"
+" * micro\\_via\n"
+" * pad\n"
+" * text\n"
+" * track\n"
+" * via\n"
+" * zone\n"
+"\n"
+"<br>\n"
+"\n"
+"### Соединения с зонами\n"
+"\n"
+" * solid\n"
+" * thermal\\_reliefs\n"
+" * none\n"
+"\n"
+"<br>\n"
+"\n"
+"### Виды серьезности\n"
+"\n"
+" * warning\n"
+" * error\n"
+" * exclusion\n"
+" * ignore\n"
+"\n"
+"<br>\n"
+"\n"
+"### Примеры\n"
+"\n"
+"    (version 1)\n"
+"\n"
+"    (rule HV\n"
+"       (constraint clearance (min 1.5mm))\n"
+"       (condition \"A.NetClass == 'HV'\"))\n"
+"\n"
+"\n"
+"    (rule HV\n"
+"       (layer outer)\n"
+"       (constraint clearance (min 1.5mm))\n"
+"       (condition \"A.NetClass == 'HV'\"))\n"
+"\n"
+"\n"
+"    (rule HV_HV\n"
+"       # больший зазор между высоковольтными дорожками\n"
+"       (constraint clearance (min \"1.5mm + 2.0mm\"))\n"
+"       (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n"
+"\n"
+"\n"
+"    (rule HV_unshielded\n"
+"       (constraint clearance (min 2mm))\n"
+"       (condition \"A.NetClass == 'HV' && !A.enclosedByArea('Shield*')\"))\n"
+"\n"
+"\n"
+"    (rule heavy_thermals\n"
+"       (constraint thermal_spoke_width (min 0.5mm))\n"
+"       (condition \"A.NetClass == 'HV'\"))\n"
+"<br><br>\n"
+"\n"
+"### Примечания\n"
+"\n"
+"Определение версии должно быть первым. Этим обозначается версия синтаксиса "
+"файла, так что\n"
+"будущие подпрограммы разбора правил смогут применять автоматическое "
+"обновление. Её следует\n"
+"устанавливать равной \"1\".\n"
+"\n"
+"Правила должны следовать в определённом порядке. Более поздние правила\n"
+"имеют преимущество над более ранними.\n"
+"Как только подходящее правило найдено, остальные правила не проверяются.\n"
+"\n"
+"Используйте Ctrl+/ для комментирования строк.\n"
+"<br><br><br>\n"
+"\n"
+"### Функции\n"
+"\n"
+"Параметры всех функций поддерживают простые шаблоны (`*` и `?`).\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsCourtyard('<обозначения_посад.мест>')\n"
+"Истина если любая часть `A` лежит в главной области установки указанных "
+"посад.мест.\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsFrontCourtyard('<обозначения_посад.мест>')\n"
+"Истина если любая часть `A` лежит в области установки указанных посад.мест. "
+"сверху.\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsBackCourtyard('<обозначения_посад.мест>')\n"
+"Истина если любая часть `A` лежит в области установки указанных посад.мест. "
+"снизу.\n"
+"<br><br>\n"
+"\n"
+"    A.intersectsArea('<имя_зоны>')\n"
+"Истина если любая часть `A` лежит внутри контура указанной зоны.\n"
+"<br><br>\n"
+"\n"
+"    A.enclosedByArea('<zone_name>')\n"
+"Истина если вся `A` лежит внутри контура указанной зоны.\n"
+"\n"
+"Обратите внимание: это потенциально более дорогой вызов, чем "
+"`intersectsArea()`.  \n"
+"Используйте `intersectsArea()` там, где это возможно.\n"
+"<br><br>\n"
+"\n"
+"    A.isPlated()\n"
+"Истина если `A` имеет металлизированные отверстия.\n"
+"<br><br>\n"
+"\n"
+"    A.inDiffPair('<имя_цепи>')\n"
+"Истина если `A` имеет цепь, которая является частью указанной диф.пары.\n"
+"`<имя_цепи>` - это база имени диф.пары. Например, `inDiffPair('/CLK')`\n"
+"соответствует цепям `/CLK_P` и `/CLK_N`.\n"
+"<br><br>\n"
+"\n"
+"    AB.isCoupledDiffPair()\n"
+"Истина если `A` и `B` являются членами одной диф.пары.\n"
+"<br><br>\n"
+"\n"
+"    A.memberOf('<имя_группы>')\n"
+"Истина если `A` является членом указанной группы (включая вложенные "
+"группы).\n"
+"<br><br>\n"
+"\n"
+"    A.existsOnLayer('<имя_слоя>')\n"
+"Истина если `A` существует на указанном слое. Имя слоя может быть как\n"
+"наименованием, указанным в Параметры платы > Слои редактора, так и\n"
+"стандартным именем (например, `F.Cu`).\n"
+"\n"
+"Обратите внимание: эта функция вернёт истину если `A` лежит на указанном "
+"слое,\n"
+"независимо от того может ли правило быть применено к этому слою.\n"
+"В таком случае лучше использовать определение `(layer \"имя_слоя\")` для "
+"правила.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideCourtyard('<footprint_refdes>') !!!\n"
+"Устарело; используйте `intersectsCourtyard()`.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideFrontCourtyard('<footprint_refdes>') !!!\n"
+"Устарело; используйте `intersectsFrontCourtyard()`.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideBackCourtyard('<footprint_refdes>') !!!\n"
+"Устарело; используйте `intersectsBackCourtyard()`.\n"
+"<br><br>\n"
+"\n"
+"    !!! A.insideArea('<zone_name>') !!!\n"
+"Устарело; используйте `intersectsArea()`.\n"
+"<br><br><br>\n"
+"\n"
+"### Ещё примеры\n"
+"\n"
+"    (rule \"copper keepout\"\n"
+"       (constraint disallow track via zone)\n"
+"       (condition \"A.intersectsArea('zone3')\"))\n"
+"\n"
+"\n"
+"    (rule \"BGA neckdown\"\n"
+"       (constraint track_width (min 0.2mm) (opt 0.25mm))\n"
+"       (constraint clearance (min 0.05mm) (opt 0.08mm))\n"
+"       (condition \"A.intersectsCourtyard('U3')\"))\n"
+"\n"
+"\n"
+"    # Исключить шёлкографию из перех.отв. покрытых паяльной маской\n"
+"    (rule silk_over_via\n"
+"       (constraint silk_clearance (min 0.2mm))\n"
+"       (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n"
+"\n"
+"\n"
+"    (rule \"Distance between Vias of Different Nets\"\n"
+"        (constraint hole_to_hole (min 0.254mm))\n"
+"        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B.Net"
+"\"))\n"
+"\n"
+"    (rule \"Clearance between Pads of Different Nets\"\n"
+"        (constraint clearance (min 3.0mm))\n"
+"        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B.Net"
+"\"))\n"
+"\n"
+"\n"
+"    (rule \"Via Hole to Track Clearance\"\n"
+"        (constraint hole_clearance (min 0.254mm))\n"
+"        (condition \"A.Type == 'Via' && B.Type == 'Track'\"))\n"
+"\n"
+"    (rule \"Pad to Track Clearance\"\n"
+"        (constraint clearance (min 0.2mm))\n"
+"        (condition \"A.Type == 'Pad' && B.Type == 'Track'\"))\n"
+"\n"
+"\n"
+"    (rule \"clearance-to-1mm-cutout\"\n"
+"        (constraint clearance (min 0.8mm))\n"
+"        (condition \"A.Layer == 'Edge.Cuts' && A.Thickness == 1.0mm\"))\n"
+"\n"
+"\n"
+"    (rule \"Max Drill Hole Size Mechanical\"\n"
+"        (constraint hole_size (max 6.3mm))\n"
+"        (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n"
+"\n"
+"    (rule \"Max Drill Hole Size PTH\"\n"
+"        (constraint hole_size (max 6.35mm))\n"
+"        (condition \"A.Pad_Type == 'Through-hole'\"))\n"
+"\n"
+"\n"
+"    # Задать особый зазор для отдельной диф.пары\n"
+"    (rule \"dp clock gap\"\n"
+"        (constraint diff_pair_gap (opt \"0.8mm\"))\n"
+"        (condition \"A.inDiffPair('/CLK')\"))\n"
+"\n"
+"    # Задать больший зазор между слоями меди и всеми диф.парами\n"
+"    (rule \"dp clearance\"\n"
+"        (constraint clearance (min \"1.5mm\"))\n"
+"        (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
+"\n"
+"\n"
+"    # Исключить терморазгрузку на конт.пл. с параметром \"для отвода тепла"
+"\"\n"
+"    (rule heat_sink_pad\n"
+"        (constraint zone_connection solid)\n"
+"        (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
+"\n"
+"    # Требовать подключения всех четырех мостиков терморазгрузки к "
+"родительской зоне\n"
+"    (rule fully_spoked_pads\n"
+"        (constraint min_resolved_spokes 4))\n"
+"\n"
+"    # Установить зазор и ширину мостиков терморазгрузки для всех зон\n"
+"    (rule defined_relief\n"
+"        (constraint thermal_relief_gap (min 10mil))\n"
+"        (constraint thermal_spoke_width (min 12mil)))\n"
+"\n"
+"    # Переопределить зазор и ширину мостиков терморазгрузки для зон "
+"'zone_GND' и 'zone_PWR'\n"
+"    (rule defined_relief_pwr\n"
+"        (constraint thermal_relief_gap (min 10mil))\n"
+"        (constraint thermal_spoke_width (min 12mil))\n"
+"        (condition \"A.Name == 'zone_GND' || A.Name == 'zone_PWR'\"))\n"
+"\n"
+"\n"
+"    # Предотвращать стекание припоя из SMD конт.пл. в отверстия\n"
+"    (rule holes_in_pads\n"
+"        (constraint physical_hole_clearance (min 0.2mm))\n"
+"        (condition \"B.Pad_Type == 'SMD'\"))\n"
+"\n"
+"    # Запретить переопределение отступа паяльной маски у конт.пл.\n"
+"    (rule \"disallow solder mask margin overrides\"\n"
+"        (constraint assertion \"A.Soldermask_Margin_Override == 0mm\")\n"
+"        (condition \"A.Type == 'Pad'\"))\n"
+"\n"
+"\n"
+"    # Обеспечить механический зазор между компонентами и контуром платы\n"
+"    (rule front_mechanical_board_edge_clearance\n"
+"        (layer \"F.Courtyard\")\n"
+"        (constraint physical_clearance (min 3mm))\n"
+"        (condition \"B.Layer == 'Edge.Cuts'\"))\n"
+"\n"
+"\n"
+"    # Проверка на токовую нагрузку\n"
+"    (rule high-current\n"
+"        (constraint track_width (min 1.0mm))\n"
+"        (constraint connection_width (min 0.8mm))\n"
+"        (condition \"A.NetClass == 'Power'\"))"
+
 #~ msgid "Reading file "
 #~ msgstr "Чтение файла "
 
@@ -41524,8 +42188,8 @@ msgstr "Печатная плата KiCad"
 #~ "\n"
 #~ "On Linux:\n"
 #~ "```\n"
-#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py "
-#~ "\"%I\" \"%O.csv\"\n"
+#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py \"%I"
+#~ "\" \"%O.csv\"\n"
 #~ "```\n"
 #~ msgstr ""
 #~ "# 1 - Полное руководство\n"
@@ -41713,8 +42377,8 @@ msgstr "Печатная плата KiCad"
 #~ "\n"
 #~ "Для Linux:\n"
 #~ "```\n"
-#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py "
-#~ "\"%I\" \"%O.csv\"\n"
+#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py \"%I"
+#~ "\" \"%O.csv\"\n"
 #~ "```\n"
 
 #, c-format
@@ -47524,8 +48188,8 @@ msgstr "Печатная плата KiCad"
 #~ msgstr "Использовать сенсорную панель для панорамирования"
 
 #~ msgid ""
-#~ "Enable touchpad-friendly controls (pan with scroll action, zoom with "
-#~ "Ctrl+scroll)."
+#~ "Enable touchpad-friendly controls (pan with scroll action, zoom with Ctrl"
+#~ "+scroll)."
 #~ msgstr ""
 #~ "Сделать управление с помощью сенсорной панели более удобным "
 #~ "(панорамирование прокруткой, масштабирование Ctrl+прокрутка)."