diff --git a/translation/pofiles/zh_TW.po b/translation/pofiles/zh_TW.po index 9098f26b13..669324bc36 100644 --- a/translation/pofiles/zh_TW.po +++ b/translation/pofiles/zh_TW.po @@ -5,7 +5,7 @@ msgstr "" "Project-Id-Version: KiCad\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-04-12 11:06-0700\n" -"PO-Revision-Date: 2021-04-04 17:59+0000\n" +"PO-Revision-Date: 2021-04-15 16:43+0000\n" "Last-Translator: taotieren \n" "Language-Team: Chinese (Traditional) \n" @@ -174,7 +174,7 @@ msgstr "簡化銅層多邊形" #: 3d-viewer/3d_canvas/create_layer_items.cpp:829 msgid "Simplify holes contours" -msgstr "簡化孔輪廓" +msgstr "簡化通孔輪廓" #: 3d-viewer/3d_canvas/create_layer_items.cpp:858 msgid "Build Tech layers" @@ -182,7 +182,7 @@ msgstr "構造工藝層" #: 3d-viewer/3d_canvas/create_layer_items.cpp:1033 msgid "Build BVH for holes and vias" -msgstr "為孔和過孔構造 BVH (盲埋孔)" +msgstr "為通孔和過孔構造 BVH (盲埋孔)" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:413 msgid "Your OpenGL version is not supported. Minimum required is 1.5" @@ -248,7 +248,7 @@ msgstr "載入 OpenGL：電路板" #: 3d-viewer/3d_rendering/legacy/create_scene.cpp:481 msgid "Load OpenGL: holes and vias" -msgstr "載入 OpenGL：開孔和過孔" +msgstr "載入 OpenGL：通孔和過孔" #: 3d-viewer/3d_rendering/legacy/create_scene.cpp:547 msgid "Load OpenGL: layers" @@ -581,7 +581,7 @@ msgstr "禁用過孔" #: 3d-viewer/3d_viewer/dialogs/dialog_3D_view_option_base.cpp:219 msgid "Disable holes" -msgstr "禁用孔" +msgstr "禁用通孔" #: 3d-viewer/3d_viewer/dialogs/dialog_3D_view_option_base.cpp:229 msgid "OpenGL" @@ -934,11 +934,11 @@ msgstr "根據材質的漫反射顏色使用 CAD 顏色樣式" #: 3d-viewer/3d_viewer/tools/3d_actions.cpp:210 msgid "Toggle Through Hole 3D models" -msgstr "切換直插 3D 模型" +msgstr "切換直插通孔 3D 模型" #: 3d-viewer/3d_viewer/tools/3d_actions.cpp:210 msgid "Toggle 3D models with 'Through hole' attribute" -msgstr "切換直插元件的 3D 模型" +msgstr "切換直插元件的通孔 3D 模型" #: 3d-viewer/3d_viewer/tools/3d_actions.cpp:216 msgid "Toggle SMD 3D models" @@ -2184,15 +2184,16 @@ msgid "These items will be skipped unless you override the locks." msgstr "除非您覆蓋鎖定，否則跳過這些專案。" #: common/dialogs/dialog_locked_items_query_base.cpp:44 -#, fuzzy msgid "Remember decision for this session." -msgstr "不再排除此違規" +msgstr "記住本會話的決定。" #: common/dialogs/dialog_locked_items_query_base.cpp:45 msgid "" "Remember the option selected for the remainder of this session.\n" "This dialog will not be shown again until KiCad is restarted." msgstr "" +"記住為本會話剩餘部分所選擇的選項。\n" +"在 KiCad 重新啟動之前，這個對話方塊不會再次顯示。" #: common/dialogs/dialog_locked_items_query_base.cpp:55 msgid "Override Locks" @@ -2203,17 +2204,18 @@ msgid "" "Override locks and apply the operation on all the items selected.\n" "Any locked items will remain locked after the operation is complete." msgstr "" +"無視鎖定並對選定的所有項應用操作。\n" +"任何鎖定的專案將在操作完成後保持鎖定。" #: common/dialogs/dialog_locked_items_query_base.cpp:60 -#, fuzzy msgid "Skip Locked Items" -msgstr "鎖定項" +msgstr "跳過鎖定項" #: common/dialogs/dialog_locked_items_query_base.cpp:61 msgid "" "Remove locked items from the selection and only apply the operation to the " "unlocked items (if any)." -msgstr "" +msgstr "從選擇中移除鎖定的專案，並只對未鎖定專案(如果有的話)進行操作。" #: common/dialogs/dialog_locked_items_query_base.h:58 msgid "Locked Items" @@ -6016,12 +6018,11 @@ msgstr "在 Web 瀏覽器中開啟“參與 KiCad”" #: common/tool/actions.cpp:631 msgid "Donate" -msgstr "" +msgstr "捐款" #: common/tool/actions.cpp:632 -#, fuzzy msgid "Open \"Donate to KiCad\" in a web browser" -msgstr "在 Web 瀏覽器中開啟“參與 KiCad”" +msgstr "在 Web 瀏覽器中開啟“向 KiCad 捐款”" #: common/tool/actions.cpp:636 msgid "Report Bug" @@ -6059,18 +6060,17 @@ msgid "Get involved with KiCad" msgstr "參與 KiCad" #: common/tool/common_control.cpp:250 -#, fuzzy, c-format +#, c-format msgid "" "Could not launch the default browser.\n" "To donate to the KiCad project, visit %s" msgstr "" "無法啟動預設瀏覽器。\n" -"有關如何幫助 KiCad 專案的資訊，請訪問 %s" +"有關如何向 KiCad 專案捐款，請訪問 %s" #: common/tool/common_control.cpp:253 -#, fuzzy msgid "Donate to KiCad" -msgstr "歡迎來到 KiCad %s！" +msgstr "向 KiCad 捐款" #: common/tool/grid_menu.cpp:93 #, c-format @@ -10576,14 +10576,12 @@ msgid "For a BJT, pin order is collector, base, emitter, substrate (optional)" msgstr "對於 BJT，引腳順序為集電極，基極，發射極，基板（可選）" #: eeschema/dialogs/dialog_spice_model.cpp:462 -#, fuzzy msgid "For a MOSFET, pin order is drain, gate, source" -msgstr "對於 MOSFET，引腳順序為漏極，柵極，源極" +msgstr "對於 MOSFET，引腳順序為 drain、gate、source" #: eeschema/dialogs/dialog_spice_model.cpp:466 -#, fuzzy msgid "For a JFET, pin order is drain, gate, source" -msgstr "對於 JFET，引腳順序為漏極，柵極，源極" +msgstr "對於 JFET，引腳順序為 drain、gate、source" #: eeschema/dialogs/dialog_spice_model.cpp:1015 msgid "Select library" @@ -12986,91 +12984,89 @@ msgid "" msgstr "輸入實現 SCH_PLUGIN::Symbol*() 函式的 Python 符號。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:250 -#, fuzzy, c-format +#, c-format msgid "Cannot open file '%s'." -msgstr "無法開啟檔案 ‘%s’" +msgstr "無法開啟檔案 '%s'。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:476 -#, fuzzy, c-format +#, c-format msgid "Unknown Record id: %d." -msgstr "未知的 DRC 錯誤碼 %d" +msgstr "未知的記錄編號： %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:596 #, c-format msgid "Pin has non-existent ownerindex %d." -msgstr "" +msgstr "引腳有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:637 #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1722 -#, fuzzy msgid "Pin has unexpected orientation." -msgstr "文字方向" +msgstr "引腳方向不符預期。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:675 -#, fuzzy msgid "Pin has unexpected electrical type." -msgstr "顯示引腳電氣型別 (&S)" +msgstr "引腳電氣型別不符預期。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:680 msgid "Pin has unexpected outer edge type." -msgstr "" +msgstr "引腳的外邊緣型別出乎意料。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:683 msgid "Pin has unexpected inner edge type." -msgstr "" +msgstr "引腳的內邊緣型別出乎意料。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:805 #, c-format msgid "Label has non-existent ownerindex %d." -msgstr "" +msgstr "標籤有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:841 #, c-format msgid "Bezier has %d control points. At least 2 are expected." -msgstr "" +msgstr "貝塞爾曲線有 %d 個控制點。預期至少2 個。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:899 #, c-format msgid "Bezier has non-existent ownerindex %d." -msgstr "" +msgstr "貝塞爾曲線有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:984 #, c-format msgid "Polyline has non-existent ownerindex %d." -msgstr "" +msgstr "多段線有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1046 #, c-format msgid "Polygon has non-existent ownerindex %d." -msgstr "" +msgstr "多邊形有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1128 #, c-format msgid "Rounded rectangle has non-existent ownerindex %d." -msgstr "" +msgstr "圓角矩形有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1166 msgid "Arc drawing is not possible for now on schematic." -msgstr "" +msgstr "當前不可能在原理圖上畫圓弧。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1175 #, c-format msgid "Arc has non-existent ownerindex %d." -msgstr "" +msgstr "圓弧有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1236 #, c-format msgid "Line has non-existent ownerindex %d." -msgstr "" +msgstr "線段有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1308 #, c-format msgid "Rectangle has non-existent ownerindex %d." -msgstr "" +msgstr "矩形有不存在的所有者索引 %d。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1613 msgid "Power Port has unknown style, use bar instead." -msgstr "" +msgstr "電源埠有未知的型別，使用條。" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1655 #, c-format @@ -13080,7 +13076,7 @@ msgstr "電源符號建立名為 '%s' 的全域性標籤" #: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2156 #, c-format msgid "Designator has non-existent ownerindex %d." -msgstr "" +msgstr "指示符有未知的所有者型別 %d。" #: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:71 #: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:64 @@ -13243,16 +13239,16 @@ msgid "Unable to read file \"%s\"" msgstr "無法讀取檔案 \"%s\"" #: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:1161 -#, fuzzy, c-format +#, c-format msgid "" "Error parsing Eagle file. Could not find '%s' instance but it is referenced " "in the schematic." -msgstr "解析 Eagle 檔案時出錯。 找不到 \"%s\" 例項, 但在原理圖中引用了它。" +msgstr "解析 Eagle 檔案時出錯。 找不到 '%s' 例項, 但在原理圖中引用了它。" #: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:1192 -#, fuzzy, c-format +#, c-format msgid "Could not find '%s' in the imported library." -msgstr "在匯入的庫中找不到 %s" +msgstr "在匯入的庫中找不到 '%s' 。" #: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:2311 #: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:2349 @@ -13874,7 +13870,6 @@ msgid "Syntax Help" msgstr "語法幫助" #: eeschema/sch_text_help_md.h:2 -#, fuzzy msgid "" "\n" " \n" @@ -14046,8 +14041,8 @@ msgstr "" "samp>
 
~~\n" " \n" " \n" +"samp>
動齒條
   
" +"CLK
 
~\n" " \n" " \n" " \n" @@ -14055,7 +14050,7 @@ msgstr "" " \n" " \n" " \n" -" \n" +" \n" " \n" " \n" " \n" @@ -14068,8 +14063,8 @@ msgstr "" " \n" " \n" " \n" -" \n" +" \n" " \n" " \n" " \n" @@ -14084,9 +14079,9 @@ msgstr "" " \n" " \n" " \n" -" \n" -" \n" +" \n" +" \n" " \n" " \n" " \n" @@ -14102,9 +14097,9 @@ msgstr "" " \n" " \n" " \n" -"\t\t\n" -"\t\t\n" -"\t\t\n" +" \n" +" \n" +" \n" " \n" " \n" " \n" @@ -14136,9 +14131,9 @@ msgstr "" " \n" " \n" " \n" +"        " +"         
" +"MEM.D1, MEM.D2, MEM.LATCH\n" " \n" "
       
overbar
   
CLK
 
~

 
${variable}		 
變數值		 
variable_value
 
${REVISION}
 
${refdes:field}		 
field_value of symbol refdes		 
field_value of symbol " +"refdes
 
${R3:VALUE}
匯流排定義          " -"   Resultant Nets           " +";  合成網
 
prefix[m..n]
 
{net1 net2 ...}		 
net1, net2, ...		 
{net1 net2 ...}		 
net1, net2, ...
 
{SCL SDA}		 
MEM{D_{[1..2]} ~LATCH}		         " -"           " -"      
MEM.D1, MEM.D2, MEM.LATCH
\n" @@ -15108,9 +15103,8 @@ msgstr "符號 \"%s\" 儲存到庫中 \"%s\"" #: eeschema/symbol_editor/symbol_library_manager.cpp:96 #: eeschema/symbol_tree_model_adapter.cpp:104 -#, fuzzy msgid "Errors were encountered loading symbols:" -msgstr "載入封裝時出現錯誤：" +msgstr "載入符號時出現錯誤：" #: eeschema/symbol_editor/symbol_library_manager.cpp:166 #, c-format @@ -19028,7 +19022,7 @@ msgstr "傳輸線路" #: pcb_calculator/dialogs/pcb_calculator_frame_base.cpp:1152 msgid "Finished hole diameter (D):" -msgstr "成品孔直徑 (D)：" +msgstr "成品通孔直徑 (D)：" #: pcb_calculator/dialogs/pcb_calculator_frame_base.cpp:1166 msgid "Plating thickness (T):" @@ -19056,7 +19050,7 @@ msgstr "間隙孔直徑：" #: pcb_calculator/dialogs/pcb_calculator_frame_base.cpp:1208 msgid "Diameter of clearance hole in ground plane(s)" -msgstr "地平面過孔直徑" +msgstr "地平面通孔直徑" #: pcb_calculator/dialogs/pcb_calculator_frame_base.cpp:1220 msgid "Z0:" @@ -20173,9 +20167,9 @@ msgstr "介電層" #: pcbnew/board_stackup_manager/panel_board_stackup.cpp:433 #: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1171 #: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1386 -#, fuzzy, c-format +#, c-format msgid "Custom (%s)" -msgstr "自定義" +msgstr "自定義 (%s)" #: pcbnew/board_stackup_manager/panel_board_stackup.cpp:633 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:155 @@ -22780,9 +22774,8 @@ msgid "Footprint Checker" msgstr "封裝檢查器" #: pcbnew/dialogs/dialog_footprint_properties.cpp:331 -#, fuzzy msgid "Footprint can be freely moved and oriented on the canvas." -msgstr "元件可以自由移動和自動放置，但其焊盤不能被選擇或編輯。" +msgstr "封裝可以在畫布上被自由移動和更改方向。" #: pcbnew/dialogs/dialog_footprint_properties.cpp:333 msgid "" @@ -22854,7 +22847,6 @@ msgstr "側面：" #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:195 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:135 -#, fuzzy msgid "Unlock footprint" msgstr "解鎖封裝" @@ -25592,16 +25584,15 @@ msgid "Suggest track finish" msgstr "建議佈線完成" #: pcbnew/dialogs/dialog_pns_settings_base.cpp:86 -#, fuzzy msgid "Optimize entire track being dragged" -msgstr "最佳化正在拖動的佈線" +msgstr "最佳化整個正被拖動的佈線" #: pcbnew/dialogs/dialog_pns_settings_base.cpp:87 msgid "" "When enabled, the entire portion of the track that is visible on the screen " "will be optimized and re-routed when a segment is dragged. When disabled, " "only the area near the segment being dragged will be optimized." -msgstr "" +msgstr "啟用後，當一段線路被拖動時，螢幕上可見的整個導線部分將被最佳化和重排路徑。禁用後，將只最佳化被拖動部分附近的區域。" #: pcbnew/dialogs/dialog_pns_settings_base.cpp:91 msgid "Use mouse path to set track posture" @@ -26186,15 +26177,14 @@ msgid "Highlight nets when they are highlighted in the schematic editor" msgstr "當網路在原理圖編輯器中高亮顯示時將其高亮顯示" #: pcbnew/dialogs/panel_display_options_base.cpp:90 -#, fuzzy msgid "Refresh 3D view automatically" -msgstr "自動調整" +msgstr "自動重新整理 3D 檢視" #: pcbnew/dialogs/panel_display_options_base.cpp:91 msgid "" "When enabled, edits to the board will cause the 3D view to refresh (may be " "slow with larger boards)" -msgstr "" +msgstr "啟用後，對電路板的編輯將造成 3D 檢視重新整理 (較大的電路板完成重新整理可能會需要不少時間）" #: pcbnew/dialogs/panel_edit_options_base.cpp:29 msgid "Magnetic pads" @@ -26218,23 +26208,21 @@ msgid "" msgstr "繪製圖形線時，強制水平、垂直或 45 度。" #: pcbnew/dialogs/panel_edit_options_base.cpp:58 -#, fuzzy msgid "Step for &rotate commands:" -msgstr "重做最後一個命令" +msgstr "&旋轉命令的步驟：" #: pcbnew/dialogs/panel_edit_options_base.cpp:63 msgid "Set increment (in degrees) for context menu and hotkey rotation." msgstr "設定上下文選單和熱鍵旋轉的增量（以度為單位）。" #: pcbnew/dialogs/panel_edit_options_base.cpp:75 -#, fuzzy msgid "Allow free pads" -msgstr "允許的功能" +msgstr "允許自由焊盤" #: pcbnew/dialogs/panel_edit_options_base.cpp:76 msgid "" "If checked, pads can be moved with respect to the rest of the footprint." -msgstr "" +msgstr "若選中，焊盤可相對於封裝的其他部分進行移動。" #: pcbnew/dialogs/panel_edit_options_base.cpp:102 #: pcbnew/dialogs/panel_edit_options_base.cpp:183 @@ -26545,13 +26533,10 @@ msgid "Mimic legacy behavior" msgstr "模仿舊行為" #: pcbnew/dialogs/panel_setup_constraints_base.cpp:110 -#, fuzzy msgid "" "Produces a slightly smoother outline at the expense of performance, some " "export fidelity issues, and overly aggressive higher-priority zone knockouts." -msgstr "" -"以犧牲效能、一些匯出保真度問題和過於激進的高優先順序覆銅挖空為代價，生成稍微" -"平滑的輪廓。" +msgstr "以犧牲效能、一些匯出保真度問題和過於激進的高優先順序區域挖空為代價，生成稍微平滑的輪廓。" #: pcbnew/dialogs/panel_setup_constraints_base.cpp:114 msgid "Smoothed polygons (best performance)" @@ -27539,6 +27524,206 @@ msgid "" " (constraint clearance (min \"1.5mm\"))\n" " (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n" msgstr "" +"### Top-level Clauses\n" +"\n" +" (version )\n" +"\n" +" (rule ...)\n" +"\n" +"\n" +"

\n" +"\n" +"### Rule Clauses\n" +"\n" +" (constraint ...)\n" +"\n" +" (condition \"\")\n" +"\n" +" (layer \"\")\n" +"\n" +"\n" +"

\n" +"\n" +"### Constraint Types\n" +"\n" +" * annular_width\n" +" * clearance\n" +" * courtyard_clearance\n" +" * diff\\_pair\\_gap\n" +" * diff\\_pair\\_uncoupled\n" +" * disallow\n" +" * edge_clearance\n" +" * length\n" +" * hole\n" +" * hole_clearance\n" +" * silk_clearance\n" +" * skew\n" +" * track_width\n" +" * via_count\n" +"\n" +"\n" +"

\n" +"\n" +"### Item Types\n" +"\n" +" * buried_via\n" +" * graphic\n" +" * hole\n" +" * micro_via\n" +" * pad\n" +" * text\n" +" * track\n" +" * via\n" +" * zone\n" +"\n" +"
\n" +"\n" +"### Examples\n" +"\n" +" (rule HV\n" +" (constraint clearance (min 1.5mm))\n" +" (condition \"A.NetClass == 'HV'\"))\n" +"\n" +"\n" +" (rule HV\n" +" (layer outer)\n" +" (constraint clearance (min 1.5mm))\n" +" (condition \"A.NetClass == 'HV'\"))\n" +"\n" +"\n" +" (rule HV_HV\n" +" # wider clearance between HV tracks\n" +" (constraint clearance (min \"1.5mm + 2.0mm\"))\n" +" (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n" +"\n" +"\n" +" (rule HV_unshielded\n" +" (constraint clearance (min 2mm))\n" +" (condition \"A.NetClass == 'HV' && !A.insideArea('Shield*')\"))\n" +"

\n" +"\n" +"### Notes\n" +"\n" +"Version clause must be the first clause.\n" +"\n" +"Rules should be ordered by specificity. Later rules take\n" +"precedence over earlier rules; once a matching rule is found\n" +"no further rules will be checked.\n" +"\n" +"Use Ctrl+/ to comment or uncomment line(s).\n" +"


\n" +"\n" +"### Expression functions\n" +"\n" +"All function parameters support simple wildcards (`*` and `?`).\n" +"

\n" +"\n" +" A.insideCourtyard('')\n" +"True if any part of `A` lies within the given footprint's principal " +"courtyard.\n" +"

\n" +"\n" +" A.insideFrontCourtyard('')\n" +"True if any part of `A` lies within the given footprint's front courtyard.\n" +"

\n" +"\n" +" A.insideBackCourtyard('')\n" +"True if any part of `A` lies within the given footprint's back courtyard.\n" +"

\n" +"\n" +" A.insideArea('')\n" +"True if any part of `A` lies within the given zone's outline.\n" +"

\n" +"\n" +" A.isPlated()\n" +"True if `A` has a hole which is plated.\n" +"

\n" +"\n" +" A.inDiffPair('')\n" +"True if `A` has net that is part of the specified differential pair.\n" +"`` is the base name of the differential pair. For example, " +"`inDiffPair('CLK')`\n" +"matches items in the `CLK_P` and `CLK_N` nets.\n" +"

\n" +"\n" +" AB.isCoupledDiffPair()\n" +"True if `A` and `B` are members of the same diff pair.\n" +"

\n" +"\n" +" A.memberOf('')\n" +"True if `A` is a member of the given group. Includes nested membership.\n" +"

\n" +"\n" +" A.existsOnLayer('')\n" +"True if `A` exists on the given layer. The layer name can be\n" +"either the name assigned in Board Setup > Board Editor Layers or\n" +"the canonical name (ie: `F.Cu`).\n" +"\n" +"NB: this returns true if `A` is on the given layer, independently\n" +"of whether or not the rule is being evaluated for that layer.\n" +"For the latter use a `(layer \"layer_name\")` clause in the rule.\n" +"


\n" +"\n" +"### More Examples\n" +"\n" +" (rule \"copper keepout\"\n" +" (constraint disallow track via zone)\n" +" (condition \"A.insideArea('zone3')\"))\n" +"\n" +"\n" +" (rule \"BGA neckdown\"\n" +" (constraint track_width (min 0.2mm) (opt 0.25mm))\n" +" (constraint clearance (min 0.05mm) (opt 0.08mm))\n" +" (condition \"A.insideCourtyard('U3')\"))\n" +"\n" +"\n" +" # prevent silk over tented vias\n" +" (rule silk_over_via\n" +" (constraint silk_clearance (min 0.2mm))\n" +" (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n" +"\n" +"\n" +" (rule \"Distance between Vias of Different Nets\" \n" +" (constraint hole_to_hole (min 0.254mm))\n" +" (condition \"A.Type =='Via' && B.Type =='Via' && A.Net != B.Net\"))\n" +"\n" +" (rule \"Clearance between Pads of Different Nets\" \n" +" (constraint clearance (min 3.0mm))\n" +" (condition \"A.Type =='Pad' && B.Type =='Pad' && A.Net != B.Net\"))\n" +"\n" +"\n" +" (rule \"Via Hole to Track Clearance\" \n" +" (constraint hole_clearance (min 0.254mm))\n" +" (condition \"A.Type =='Via' && B.Type =='Track'\"))\n" +" \n" +" (rule \"Pad to Track Clearance\" \n" +" (constraint clearance (min 0.2mm))\n" +" (condition \"A.Type =='Pad' && B.Type =='Track'\"))\n" +"\n" +"\n" +" (rule \"clearance-to-1mm-cutout\"\n" +" (constraint clearance (min 0.8mm))\n" +" (condition \"A.Layer=='Edge.Cuts' && A.Thickness == 1.0mm\"))\n" +"\n" +"\n" +" (rule \"Max Drill Hole Size Mechanical\" \n" +" (constraint hole (max 6.3mm))\n" +" (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n" +" \n" +" (rule \"Max Drill Hole Size PTH\" \n" +" (constraint hole (max 6.35mm))\n" +" (condition \"A.Pad_Type == 'Through-hole'\"))\n" +"\n" +"\n" +" # Specify an optimal gap for a particular diff-pair\n" +" (rule \"dp clock gap\"\n" +" (constraint diff_pair_gap (opt \"0.8mm\"))\n" +" (condition \"A.inDiffPair('CLK') && AB.isCoupledDiffPair()\"))\n" +"\n" +" # Specify a larger clearance around any diff-pair\n" +" (rule \"dp clearance\"\n" +" (constraint clearance (min \"1.5mm\"))\n" +" (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n" #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:74 msgid "Default properties for new dimension objects:" @@ -28514,9 +28699,9 @@ msgid "The current PCB has been modified. Save changes?" msgstr "當前 PCB 已被修改。是否儲存更改？" #: pcbnew/files.cpp:598 -#, fuzzy, c-format +#, c-format msgid "PCB '%s' does not exist. Do you wish to create it?" -msgstr "PCB \"%s\" 不存在，你想建立它嗎？" +msgstr "PCB '%s' 不存在，你想建立它嗎？" #: pcbnew/files.cpp:807 #, c-format @@ -28536,18 +28721,18 @@ msgid "No access rights to write to file \"%s\"" msgstr "沒有許可權寫入檔案 \"%s\"" #: pcbnew/files.cpp:989 pcbnew/files.cpp:1091 -#, fuzzy, c-format +#, c-format msgid "" "Error saving board file '%s'.\n" "%s" msgstr "" -"儲存電路板檔案 \"%s\" 錯誤。\n" +"儲存電路板檔案 '%s' 出錯。\n" "%s" #: pcbnew/files.cpp:994 -#, fuzzy, c-format +#, c-format msgid "Failed to create temporary file '%s'." -msgstr "無法建立臨時檔案 \"%s\"" +msgstr "未能建立臨時檔案 '%s'。" #: pcbnew/files.cpp:1007 #, c-format @@ -28559,14 +28744,14 @@ msgstr "" "重新命名臨時檔案 \"%s\" 失敗" #: pcbnew/files.cpp:1046 -#, fuzzy, c-format +#, c-format msgid "File '%s' saved." -msgstr "檔案 \"%s\" 已儲存。" +msgstr "檔案 '%s' 已儲存。" #: pcbnew/files.cpp:1072 -#, fuzzy, c-format +#, c-format msgid "No access rights to write to file '%s'." -msgstr "沒有許可權寫入檔案 \"%s\"" +msgstr "沒有許可權寫入檔案 '%s'。" #: pcbnew/files.cpp:1129 #, c-format @@ -30688,7 +30873,7 @@ msgid "Ignoring a text since Eagle layer '%s' (%d) was not mapped" msgstr "忽略文字，因為 Eagle 圖層 '%s' (%d) 未對映" #: pcbnew/plugins/eagle/eagle_plugin.cpp:1920 -#, fuzzy, c-format +#, c-format msgid "Ignoring a rectangle since Eagle layer '%s' (%d) was not mapped" msgstr "忽略矩形，因為 Eagle 圖層 '%s' (%d) 未對映" @@ -32180,7 +32365,7 @@ msgstr "特殊工具" #: pcbnew/tools/edit_tool.cpp:336 #, c-format msgid "Unable to resize arc tracks %.1f degrees or greater." -msgstr "" +msgstr "無法將圓弧導線角度調整 %.1f 度或更多。" #: pcbnew/tools/edit_tool.cpp:652 msgid "Drag Arc Track" @@ -34088,21 +34273,18 @@ msgid "Layer Display Options" msgstr "圖層顯示選項" #: pcbnew/widgets/appearance_controls.cpp:575 -#, fuzzy msgid "Inactive layers:" msgstr "非活動圖層：" #: pcbnew/widgets/appearance_controls.cpp:587 -#, fuzzy msgid "Inactive layers will be shown in full color" -msgstr "非活動圖層將顯示全綵色" +msgstr "非活動圖層將以全綵色顯示" #: pcbnew/widgets/appearance_controls.cpp:591 msgid "Dim" msgstr "暗顯" #: pcbnew/widgets/appearance_controls.cpp:593 -#, fuzzy msgid "Inactive layers will be dimmed" msgstr "非活動圖層將變暗" @@ -34111,7 +34293,6 @@ msgid "Hide" msgstr "隱藏" #: pcbnew/widgets/appearance_controls.cpp:599 -#, fuzzy msgid "Inactive layers will be hidden" msgstr "非活動圖層將被隱藏" @@ -34164,7 +34345,6 @@ msgid "Ratsnest lines are shown to items on visible layers" msgstr "飛線線顯示為可見圖層上的專案" #: pcbnew/widgets/appearance_controls.cpp:831 -#, fuzzy msgid "Set Net Color" msgstr "設定網路顏色" @@ -34175,18 +34355,17 @@ msgstr "高亮 %s" #: pcbnew/widgets/appearance_controls.cpp:836 #: pcbnew/widgets/appearance_controls.cpp:2150 -#, fuzzy, c-format +#, c-format msgid "Select Tracks and Vias in %s" -msgstr "選擇 %s 中的佈線和過孔" +msgstr "選擇 %s 中的導線和過孔" #: pcbnew/widgets/appearance_controls.cpp:839 #: pcbnew/widgets/appearance_controls.cpp:2154 -#, fuzzy, c-format +#, c-format msgid "Unselect Tracks and Vias in %s" -msgstr "在 %s 中取消選擇佈線和過孔" +msgstr "取消選擇 %s 中的導線和過孔" #: pcbnew/widgets/appearance_controls.cpp:847 -#, fuzzy msgid "Hide All Other Nets" msgstr "隱藏所有其他網路" @@ -34201,10 +34380,9 @@ msgid "Click to show ratsnest for %s" msgstr "單擊以顯示 %s 的飛線" #: pcbnew/widgets/appearance_controls.cpp:887 -#, fuzzy msgid "" "Double click (or middle click) to change color; right click for more actions" -msgstr "雙擊或中鍵更改顏色，右鍵單擊選單" +msgstr "雙擊(或中鍵單擊)更改顏色，右鍵單擊檢視更多操作" #: pcbnew/widgets/appearance_controls.cpp:1389 msgid "Double click or middle click for color change, right click for menu" @@ -34383,22 +34561,19 @@ msgid "Show or hide ratsnest for nets in %s" msgstr "顯示或隱藏 %s 中的網路飛線" #: pcbnew/widgets/appearance_controls.cpp:2142 -#, fuzzy msgid "Set Netclass Color" msgstr "設定網路類顏色" #: pcbnew/widgets/appearance_controls.cpp:2147 -#, fuzzy, c-format +#, c-format msgid "Highlight Nets in %s" msgstr "高亮 %s 中的網路" #: pcbnew/widgets/appearance_controls.cpp:2161 -#, fuzzy msgid "Show All Netclasses" msgstr "顯示所有網路類" #: pcbnew/widgets/appearance_controls.cpp:2164 -#, fuzzy msgid "Hide All Other Netclasses" msgstr "隱藏所有其他網路類"