diff --git a/pcbnew/tools/board_inspection_tool.cpp b/pcbnew/tools/board_inspection_tool.cpp index f3da5547b9..2afe46b83d 100644 --- a/pcbnew/tools/board_inspection_tool.cpp +++ b/pcbnew/tools/board_inspection_tool.cpp @@ -378,7 +378,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR constraint = drcEngine.EvalRules( CONNECTION_WIDTH_CONSTRAINT, a, b, layer, r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved min connection width constraint: %s." ), + r->Report( wxString::Format( _( "Resolved min connection width: %s." ), reportMin( m_frame, constraint ) ) ); break; @@ -415,7 +415,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR case DRCE_DRILL_OUT_OF_RANGE: case DRCE_MICROVIA_DRILL_OUT_OF_RANGE: r = dialog->AddHTMLPage( _( "Hole Size" ) ); - reportHeader( _( "Hole diameter resolution for:" ), a, r ); + reportHeader( _( "Hole size resolution for:" ), a, r ); if( compileError ) reportCompileError( r ); @@ -423,7 +423,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR constraint = drcEngine.EvalRules( HOLE_SIZE_CONSTRAINT, a, b, layer, r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved diameter constraints: min %s; max %s." ), + r->Report( wxString::Format( _( "Resolved hole size constraints: min %s; max %s." ), reportMin( m_frame, constraint ), reportMax( m_frame, constraint ) ) ); break; @@ -447,7 +447,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR clearanceStr = m_frame->StringFromValue( clearance, true ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), clearanceStr ) ); + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), clearanceStr ) ); } r->Report( "" ); @@ -467,14 +467,14 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR else { r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), clearanceStr ) ); + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), clearanceStr ) ); } break; case DRCE_DRILLED_HOLES_TOO_CLOSE: r = dialog->AddHTMLPage( _( "Hole to Hole" ) ); - reportHeader( _( "Hole to hole clearance resolution for:" ), a, b, r ); + reportHeader( _( "Hole-to-hole clearance resolution for:" ), a, b, r ); if( compileError ) reportCompileError( r ); @@ -484,7 +484,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR clearanceStr = m_frame->StringFromValue( clearance, true ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), clearanceStr ) ); + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), clearanceStr ) ); break; case DRCE_EDGE_CLEARANCE: @@ -499,7 +499,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR clearanceStr = m_frame->StringFromValue( clearance, true ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), clearanceStr ) ); + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), clearanceStr ) ); break; case DRCE_CLEARANCE: @@ -550,7 +550,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR clearanceStr = m_frame->StringFromValue( clearance, true ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), clearanceStr ) ); + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), clearanceStr ) ); } r->Report( "" ); @@ -570,7 +570,7 @@ void BOARD_INSPECTION_TOOL::InspectDRCError( const std::shared_ptr& aDR else { r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), clearanceStr ) ); + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), clearanceStr ) ); } break; @@ -729,7 +729,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) { r->Report( "" ); r->Report( "" ); - reportHeader( _( "Thermal relief gap resolution for:" ), a, b, layer, r ); + reportHeader( _( "Thermal-relief gap resolution for:" ), a, b, layer, r ); constraint = drcEngine.EvalRules( THERMAL_RELIEF_GAP_CONSTRAINT, pad, zone, layer, r ); int gap = constraint.m_Value.Min(); @@ -743,7 +743,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) r->Report( "" ); r->Report( "" ); - reportHeader( _( "Spoke width resolution for:" ), a, b, layer, r ); + reportHeader( _( "Thermal-relief spoke width resolution for:" ), a, b, layer, r ); constraint = drcEngine.EvalRules( THERMAL_SPOKE_WIDTH_CONSTRAINT, pad, zone, layer, r ); int width = constraint.m_Value.Opt(); @@ -752,12 +752,12 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved thermal relief spoke width: %s." ), + r->Report( wxString::Format( _( "Resolved spoke width: %s." ), m_frame->StringFromValue( width, true ) ) ); r->Report( "" ); r->Report( "" ); - reportHeader( _( "Spoke count resolution for:" ), a, b, layer, r ); + reportHeader( _( "Thermal-relief min spoke count resolution for:" ), a, b, layer, r ); constraint = drcEngine.EvalRules( MIN_RESOLVED_SPOKES_CONSTRAINT, pad, zone, layer, r ); int minSpokes = constraint.m_Value.Min(); @@ -766,7 +766,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved min thermal relief spoke count: %d." ), + r->Report( wxString::Format( _( "Resolved min spoke count: %d." ), minSpokes ) ); std::shared_ptr connectivity = pad->GetBoard()->GetConnectivity(); @@ -816,7 +816,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); } else @@ -830,7 +830,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) // Report a 0 clearance for solid connections r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( 0, true ) ) ); } @@ -849,7 +849,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) if( ac && bc && ac->GetNetCode() > 0 && ac->GetNetCode() == bc->GetNetCode() ) { // Same nets.... - r->Report( _( "Items belong to the same net. Clearance is 0." ) ); + r->Report( _( "Items belong to the same net. Min clearance is 0." ) ); } else { @@ -864,7 +864,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) if( constraint.IsNull() ) { - r->Report( _( "Clearance is 0." ) ); + r->Report( _( "Min clearance is 0." ) ); } else if( clearance < 0 ) { @@ -874,7 +874,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) } else { - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); } } @@ -892,7 +892,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) && bc->GetNetname() == coupledNet ) { r = dialog->AddHTMLPage( _( "Diff Pair" ) ); - reportHeader( _( "Diff pair gap resolution for:" ), ac, bc, active, r ); + reportHeader( _( "Diff-pair gap resolution for:" ), ac, bc, active, r ); constraint = drcEngine.EvalRules( DIFF_PAIR_GAP_CONSTRAINT, ac, bc, active, r ); @@ -905,7 +905,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) r->Report( "" ); r->Report( "" ); r->Report( "" ); - reportHeader( _( "Diff pair max uncoupled length resolution for:" ), ac, bc, + reportHeader( _( "Diff-pair max uncoupled length resolution for:" ), ac, bc, active, r ); if( !drcEngine.HasRulesForConstraintType( DIFF_PAIR_MAX_UNCOUPLED_CONSTRAINT ) ) @@ -973,7 +973,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) if( !warning.IsEmpty() ) r->Report( warning ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); r->Flush(); @@ -997,7 +997,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); r->Flush(); @@ -1041,7 +1041,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); r->Flush(); @@ -1061,7 +1061,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) r->Report( "" ); } - reportHeader( _( "Hole to hole clearance resolution for:" ), a, b, r ); + reportHeader( _( "Hole-to-hole clearance resolution for:" ), a, b, r ); constraint = drcEngine.EvalRules( HOLE_TO_HOLE_CONSTRAINT, a, b, UNDEFINED_LAYER, r ); clearance = constraint.m_Value.Min(); @@ -1070,7 +1070,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); r->Flush(); @@ -1109,7 +1109,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); r->Flush(); @@ -1138,7 +1138,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) else { r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); } @@ -1204,7 +1204,7 @@ int BOARD_INSPECTION_TOOL::InspectClearance( const TOOL_EVENT& aEvent ) else { r->Report( "" ); - r->Report( wxString::Format( _( "Resolved clearance: %s." ), + r->Report( wxString::Format( _( "Resolved min clearance: %s." ), m_frame->StringFromValue( clearance, true ) ) ); } } @@ -1262,7 +1262,7 @@ int BOARD_INSPECTION_TOOL::InspectConstraints( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Width constraints: min %s; opt %s; max %s." ), + r->Report( wxString::Format( _( "Resolved width constraints: min %s; opt %s; max %s." ), reportMin( m_frame, constraint ), reportOpt( m_frame, constraint ), reportMax( m_frame, constraint ) ) ); @@ -1282,7 +1282,7 @@ int BOARD_INSPECTION_TOOL::InspectConstraints( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Diameter constraints: min %s; opt %s; max %s." ), + r->Report( wxString::Format( _( "Resolved diameter constraints: min %s; opt %s; max %s." ), reportMin( m_frame, constraint ), reportOpt( m_frame, constraint ), reportMax( m_frame, constraint ) ) ); @@ -1299,7 +1299,7 @@ int BOARD_INSPECTION_TOOL::InspectConstraints( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Annular width constraints: min %s; opt %s; max %s." ), + r->Report( wxString::Format( _( "Resolved annular width constraints: min %s; opt %s; max %s." ), reportMin( m_frame, constraint ), reportOpt( m_frame, constraint ), reportMax( m_frame, constraint ) ) ); @@ -1311,7 +1311,7 @@ int BOARD_INSPECTION_TOOL::InspectConstraints( const TOOL_EVENT& aEvent ) || item->Type() == PCB_VIA_T ) { r = dialog->AddHTMLPage( _( "Hole Size" ) ); - reportHeader( _( "Hole diameter resolution for:" ), item, r ); + reportHeader( _( "Hole size resolution for:" ), item, r ); // PADSTACKS TODO: once we have padstacks we'll need to run this per-layer.... constraint = EVAL_RULES( HOLE_SIZE_CONSTRAINT, item, nullptr, UNDEFINED_LAYER, r ); @@ -1320,7 +1320,7 @@ int BOARD_INSPECTION_TOOL::InspectConstraints( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Diameter constraints: min %s; opt %s; max %s." ), + r->Report( wxString::Format( _( "Resolved hole size constraints: min %s; opt %s; max %s." ), reportMin( m_frame, constraint ), reportOpt( m_frame, constraint ), reportMax( m_frame, constraint ) ) ); @@ -1339,7 +1339,7 @@ int BOARD_INSPECTION_TOOL::InspectConstraints( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Text height constraints: min %s; opt %s; max %s." ), + r->Report( wxString::Format( _( "Resolved height constraints: min %s; opt %s; max %s." ), reportMin( m_frame, constraint ), reportOpt( m_frame, constraint ), reportMax( m_frame, constraint ) ) ); @@ -1355,7 +1355,7 @@ int BOARD_INSPECTION_TOOL::InspectConstraints( const TOOL_EVENT& aEvent ) reportCompileError( r ); r->Report( "" ); - r->Report( wxString::Format( _( "Text thickness constraints: min %s; opt %s; max %s." ), + r->Report( wxString::Format( _( "Resolved thickness constraints: min %s; opt %s; max %s." ), reportMin( m_frame, constraint ), reportOpt( m_frame, constraint ), reportMax( m_frame, constraint ) ) );