d47bd3a04d
Rewrite broken collision routine SHAPE_ARC::Collide( SEG& aSeg )
2021-11-15 14:04:37 +00:00
cb7e57fb43
CIRCLE::IntersectLine fix incorrect algorithm documentation comments
2021-11-15 14:04:37 +00:00
0c3da0f072
Implement true arc collisions for arcs inside a SHAPE_LINE_CHAIN
2021-11-15 14:04:37 +00:00
f5fc9fa11f
Another auto proxy tweak
2021-11-13 21:23:32 -05:00
73f40b11ee
Some more cleanup
2021-11-11 23:58:34 -05:00
009bb7f033
Add missing WinHttpOpen to resolve pac proxies
2021-11-11 22:56:45 -05:00
b20317ca84
Some minor cleanup of the proxy detect
2021-11-11 22:47:21 -05:00
e2926f69a5
Add support to fetch windows proxy config for use with curl
...
Fix https://gitlab.com/kicad/code/kicad/-/issues/9594
2021-11-11 09:30:10 -05:00
d66487c383
Make sure RTree bounding box is at least as big as hole.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9526
2021-11-05 14:29:10 +00:00
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
29c3601061
SHAPE_POLY_SET: add FullPointCount(), mainly for statistics and debug.
2021-10-24 15:06:24 +02:00
9b9e379aa0
Overhaul arc internal model to not over-specify information.
2021-10-15 12:45:43 +01:00
9e557d84c6
Ensure appended arcs are valid arcs (start, mid, end cannot be collinear)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9380
2021-10-13 18:58:21 +01:00
4b8ca18bf7
Remove unfinished code for handling arcs in SHAPE_POLY_SET::booleanOp
...
Boolean Ops on polygons with arcs are not supported (the only exception
is Simplify)
Also fix a bug in SHAPE_LINE_CHAIN::splitArc that resulted in an
exception
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9380
2021-10-13 18:29:32 +01:00
c1e6fdfb47
Polygon triangulation: Check for broken remainders
...
If the last three points of a tesselation are concave, we will never be
able to triangulate them. They were likely formed from a bad polygon,
so we will drop the triangle and return completed
Fixes https://gitlab.com/kicad/code/kicad/issues/9380
2021-10-12 12:14:42 -07:00
52bbfb9109
Remove dependency of dot size on linear mils
...
Changes a dot to be a square pixel (linewidth x linewidth). This allows
the removal of IU dependencies and ensures that a dot is always visible
on screen. Also makes sure that cairo is setting the current linewidth
during its stroke routines
Fixes https://gitlab.com/kicad/code/kicad/issues/9362
2021-10-10 09:40:26 -07:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
e2368b733c
Allow selection of NPTH pads with zero copper size
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9249
2021-09-26 18:17:50 -04:00
4abee7c2eb
Fix SHAPE_LINE_CHAIN::Split when inserting a point on an arc
...
Ensure the arc is split into two at the point specified.
Partly fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
Additional work required to ensure that the shove state is preserved.
2021-09-26 15:15:51 +01:00
46949abe4a
Don't scroll to highlight an object already visible.
2021-09-25 15:31:52 +01:00
28bd734313
Prevent invalid paths in fracture
...
We are not always sure of the path validity in fracture. Nominally, the
Clipper Simplify routine should remove invalid parts but in the case
where it doesn't, we need to recover gracefully, even if the output
polygon is not valid.
Fixes https://gitlab.com/kicad/code/kicad/issues/9199
2021-09-21 10:49:39 -07:00
7a993c0211
Add support mode for dark mode to SCINTILLA_TRICKS.
...
Also removes the return value from the BITMAP_STORE's themeChanged
method as it will provide the wrong answer for the second frame it's
called on.
Also hooked up ACTION_TOOLBAR, the app launcher, and the project tree
to the wx event for system color changes so they change on the fly.
Fixes https://gitlab.com/kicad/code/kicad/issues/6026
2021-09-14 00:18:50 +01:00
f64abcba36
Restore BBoxCache usage for zone fill performance.
2021-09-09 16:43:47 +01:00
3b7f5a3db7
Remove the native cursor for moving on Windows to avoid visual conflicts
...
Fix #8801
2021-09-04 18:27:02 -04:00
ed39b33d74
Fix edge case in CIRCLE::Intersect that caused a divide-by-zero crash
...
Also add some additional test cases.
2021-08-25 19:11:19 +01:00
80355f04a9
Fix SHAPE_LINE_CHAIN::Replace at end of chain
2021-08-13 16:59:45 -04:00
d9cf939ba1
SHAPE_LINE_CHAIN::Replace Don't call front() or back() if empty
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8949
2021-08-12 16:32:06 +01:00
ab3564f12d
Fix formatting in prior commit
2021-08-11 17:40:23 +01:00
22df01183d
Fix edge cases in CIRCLE::Intersect that were causing KiROUND overflow
2021-08-11 17:31:27 +01:00
11fc74920c
Fix infinite loop in SHAPE_LINE_CHAIN::Slice
...
Was resulting in infinite loop due to wrong calculation
in NextShape.
2021-08-09 21:10:33 +01:00
ae87dc686a
Fix SHAPE_LINE_CHAIN::NearestPoint when aAllowInternalShapePoints=false
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8770
2021-08-08 20:58:20 +01:00
1edb96cc5b
Fix SHAPE_LINE_CHAIN::Slice(), splitting arcs when required
2021-08-08 19:09:54 +01:00
eaf8eb284a
Add true arc-to-polyline collisions
2021-08-05 17:45:12 +01:00
dd65ce9523
Simplify & move new arc collision code into Kimath library
...
Don't need to check intersections with the circle, just fix the
calculated "projected" point from the end points.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8234
2021-08-05 17:45:12 +01:00
b6be10f05c
Fix CIRCLE::Intersect( const SEG& aSeg ) and add unit tests
2021-08-05 17:45:12 +01:00
318435aedb
Add more test cases: simulate zone fill around arc + diff pair meander
2021-08-05 17:45:11 +01:00
b6664eecf2
arc: fix incorrect arc center calculation for angle < 0 or > 180 deg
2021-08-05 18:15:55 +02:00
c00f4ed5d2
Add regression tests for track cleaner.
2021-08-03 16:17:18 +01:00
3a833debea
ShapeToPolygon: implement negative inflation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8859
2021-07-28 10:37:56 +00:00
369d813a32
Pass std::string by reference instead of on the stack where applicable.
2021-07-27 13:30:05 -04:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
4760480f40
Quiet compiler warnings.
2021-07-22 13:03:17 +01:00
937e4b1d8c
ShapeToPoly: Fix outline/arc intersection for large expansions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8820
Adds shortcut code path for 90deg corners
Segments are now actually symetrical
Refactored and commented the code
2021-07-22 11:53:08 +00:00
bf80b9c04c
Last of the NULL expunging.
2021-07-20 10:32:22 -04:00
4c457b5ed3
More NULL expunging.
2021-07-18 14:31:55 -04:00
25e9d17722
Fix a boost compatibility with old boost versions.
...
(replace boost::optional::has_value() by its definition is_initialized())
2021-07-16 14:01:26 +02:00
8b3ccab0a3
Implement explicit polygon construction for most pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8650
2021-07-13 14:51:58 +00:00
54b6f51633
DSN export: export RECT and ARC shapes (on silkscreen layer) from footprints
...
Also export arc track segments as lines. (Freerouter does not support QARCs)
Fixes #8769
https://gitlab.com/kicad/code/kicad/issues/8769
2021-07-11 18:15:40 +02:00
ec64e8ad5b
TransformRingToPolygon(): fix incorrect approximation of the hole.
2021-07-06 13:59:05 +02:00
72435c78af
Fix out of bounds crash in SHAPE_LINE_CHAIN::splitArc
...
Check that the index references a point that is part of an arc
2021-07-05 20:29:24 +01:00
515669284a
convert_basic_shapes_to_polygon: some enhancements:
...
- allows setting a minimal seg count for circles and rounded end segments.
- When using ERROR_OUTSIDE, ensure the arc correction is the actual value
needed by the segment count, not the max value allowed
2021-07-05 17:46:02 +02:00
3103ff9aa3
Fix display of filled polygons with arcs in the outline
2021-07-04 12:10:59 -04:00
ddc20dadc0
Formatting and spelling tweaks
2021-07-03 15:43:40 -04:00
cee5920d5c
Remove dead code (SHAPE_LINE_CHAIN::DetectArcs)
2021-07-03 19:37:50 +00:00
778c64de88
Implement ClearArcs() and check curved polys don't get a booleanOp
...
We cannot (yet) support passing several curved outlines through clipper.
In these cases, the caller should ClearArcs() before processing.
2021-07-03 19:37:50 +00:00
260a9d0540
Use ZFillFunction to modify arcs post clipper (does not fully work yet)
...
Added a unit test to verify union and intersection of polygons result
in desired results: subject + clip - intersect == union
2021-07-03 19:37:50 +00:00
437e2783fb
Use Clipper Z value to detect arcs post clipper
2021-07-03 19:37:50 +00:00
a9a8aa8243
SHAPE_LINE_CHAIN splitArc on Insert, Remove and Replace
...
This ensures that the arc shapes remain correct after removing
a point belonging to an arc or inserting a point in the middle
of an arc.
Simplify implementation of Replace( ..., aP ). Now a Remove
operation followed by an Insert operation.
Improve QA test for SHAPE_LINE_CHAIN Append, Insert and Replace
Implement SHAPE_LINE_CHAIN::splitArc to break up an arc into two
Implement SHAPE_ARC::ConstructFromStartEndCenter and add qa test
2021-07-03 19:37:50 +00:00
3f73d8c2b5
SHAPE_LINE_CHAIN::Area() should always be positive
...
The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
2021-07-03 19:37:50 +00:00
c3051ba48a
Refactor SHAPE_LINE_CHAIN to allow two shapes per point
...
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2021-07-03 19:37:50 +00:00
c1361ae173
SHAPE_POLY_SET: Detect arcs after boolean operations
2021-07-03 19:37:50 +00:00
3ee8b4825c
Implement SHAPE_LINE_CHAIN::DetectArcs and add qa test
2021-07-03 19:37:50 +00:00
14c3d9055e
Add CIRCLE::Contains( VECTOR2I aP ) and add unit tests
2021-07-03 19:37:50 +00:00
a28d9f17e8
WIP
2021-07-03 19:37:50 +00:00
8521deb38d
De-scope ClipperLib namespace
2021-07-03 19:37:50 +00:00
6c224156f5
Adding conversion from points to arcs
...
Allows detection of arcs from segments in a SHAPE_LINE_CHAIN, converting
them to SHAPE_ARCs in the chain
2021-07-03 19:37:50 +00:00
5b2be906b8
Removing CLIPPER poly support
2021-07-03 19:37:50 +00:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
507a88524a
KiCad internal library header file housekeeping.
2021-07-01 13:46:38 -04:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
bcb5618315
Fix incorrect calculation in TransformCircleToPolygon(), only noticeable
...
when the allowed aError is (unusually) large.
2021-06-28 18:51:37 +02:00
fa49b54f93
Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
...
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
310adedf85
Add GetCircleToSegmentError() to geometry/geometry_utils.
...
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
3c81403424
Refinements in Arc to Polygon transform: slightly better shapes of arc ends.
...
Note also the transform is still not good: the same parameters are applied
to convert inner arc, outer arc and middle arc of a thick arc to segments.
But these parameters depend on arc radius (or circle radius) value.
2021-06-26 14:20:55 +02:00
31d7a0a8d1
TransformArcToPolygon(): slightly better approximation of arc.
...
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
1d6ad4a52a
SHAPE_ARC::ConvertToPolyline(): fix ugly approximation for some arcs.
...
Arcs with small radius can be approximated with very few segments.
However, if the thickness is large, relative to the radius, the approximation
must be based on the external radius, not the arc radius.
The difference can be significant.
This is especially noticeable for these graphic arcs in filled zones.
2021-06-23 18:30:02 +02:00
0ff1f6f69c
Try to fix a include order (Windows only, to fix aCI/CD error)
2021-06-16 20:04:32 +02:00
aeb479b46f
Fix an issue with pythons scripts running outside Kicad (Windows specific).
...
When running a python script is run from a console, outside Kicad, a wxWidgets
alert was always show (even in release mode)
This is due to calling wxStandardPaths::Get() with no wxApp open( i.e. wxTheApp == O)
The fix uses a dummy wxApp in this case.
2021-06-16 10:18:39 +02:00
a04d6401c1
Transform arcs more accurately
...
Segment approximation for arcs leaves small "indents" where the rounded
edges of two segments don't quite meet.
This gives closer approximation by calculating the inner and outer joint
points based on the radius, eliminating the indents.
2021-06-11 14:26:38 -07:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
053bd66650
Fix localization of OS unsupported message, disallow bug reports from W7
2021-06-09 19:01:54 +00:00
ffa87e69c6
Remove/replace some stdint.h includes
2021-06-08 21:17:57 -04:00
69d7a23e1c
Start cleaning out wx/wx.h in cpp files
2021-06-07 18:20:47 -04:00
f923649801
If NSError contains recovery suggestion string, append it to error message as it was until now. However, if recovery string is NIL, do not append it at all.
...
This MR fixes the "error message\n\n(null)".
2021-06-06 14:24:08 +00:00
53a75a4961
Fix actual-clearance handling in arc collision routines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8407
2021-06-03 18:33:59 +01:00
976e756b02
Formatting.
2021-06-03 18:33:59 +01:00
059f79dfdb
Re-remove KiROUND from header
...
Moves routines requiring KiROUND (and util.h by extension) to the cpp
file
2021-06-03 08:44:17 -07:00
29783f125b
Eliminate one wxRect constructor in BOX2
...
The only usage auto converted to BOX2D anyway...
2021-06-03 01:27:15 -04:00
cf1c75ecd4
Handle rounding errors in seg length calculation
...
SQRT needs to be passed through KiROUND before returning otherwise,
truncation errrors will accumulate between routing and DRC
Fixes https://gitlab.com/kicad/code/kicad/issues/8541
2021-06-02 16:42:35 -07:00
c294d28275
Split POLY_GRID_PARTITION to a cpp file
...
Not entirely a lightweight class
2021-06-02 18:31:30 -04:00
13abb9f947
Shift some seg functions to the cpp file
2021-06-02 18:31:30 -04:00
b6de4da686
Fix compatibility with wxWidgets 3.0.x
...
Fixes #8533
https://gitlab.com/kicad/code/kicad/issues/8533
2021-06-02 10:02:20 +02:00
0b4a680dbb
Hotglue wxLogDebug into math/util.h without the global include
2021-06-02 00:26:16 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
46d746c9da
Performance optimizations.
2021-06-01 23:11:54 +01:00
2d8264124d
geometry: SHAPE_LINE_CHAIN::PathLength() now can accept the maximum index of the segment to calculate the length to
2021-05-29 00:13:24 +02:00
Roberto Fernandez Bautista
Marek Roszko
Jeff Young
Johannes Pfister
jean-pierre charras
Seth Hillbrand
Jon Evans
david-beinder
Wayne Stambaugh
luz paz
Michal Schulz
Tomasz Wlostowski