Use the wxWidgets official accelerator key string for WXK_BACK (this is "Back") in menuitems instead of "BkSp"
Also when reading the hotkey config file, avoid to set a hotkey to unassigned when its name is not found in list.
The default value is used.
Unassigned hotkey use <unassigned> as key name (and 0 as key code) in file.
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
Don't process zoom both in Legacy code and Modern code; one of
them will decide the zoom has already changed and do odd things.
Make sure the view is updated after zooming, otherwise you have
to move the mouse over the canvas before seeing the new zoom.
On Linux (GTK?) the accelerator key BkSp, when used in menus must be coded as "\t\b" and not "\tBkSp".
However, On Windows, it must be "\tBkSp".
Joys of multi-platform development.
This reverts the previous work-around 7d62f14dd for the RTree splitting
degeneracy that was placed prior to v5. It appears not to have worked
for all systems. In its place, we use doubles instead of floats to
calculate the bounding box when filling the RTree. This keeps maximum
volume items from overlapping with the system boundary in test cases.
Be more intelligent about sorting lib tree items. (Footprint
entries, for instance, come out of an already-sorted list.)
Don't recreate menus twice when laoding Footprint Editor.
More pervasive use of WX_FILENAME to avoid expensive calls to
wxFileName::SplitPath() and string concatenation.
For POSIX kernels do all the work on the file-system side so we
don't have to keep converting back and forth between encodings.
Cache the footprint info on disk (in the project).
Move timestamp-generation (and checking) to the filesystem so the
above will be bullet-proof.
Rewrite some wxWidgets classes for performance (see common.h).
Drop all uses of wxRAISED_BORDER and wxSUNKEN_BORDER from dialogs and
panels used in main frame windows.
Drop use of wxSP_3DSASH options on all wxSplitterWindow definitions.
Minor dialog alignment and spacing fixes.
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
Put the buttons in platform-compliant order.
Get rid of SaveMultiOptions in favour of repeated standard save
dialogs with a "Apply to all" checkbox.
Fixes: lp:1783444
* https://bugs.launchpad.net/kicad/+bug/1783444
Eagle allows for variants of components to be listed in the schematic.
This patch copies the variant data into the imported schematic item,
prefixing the alternate variant names with "VARIANT_" and keeping the
alternate values.
There's no point in having both Save Symbol and Save Library when
only one can be selected at a time.
Also cleans up a bunch of extraneous icons, and fixes a few
copy/paste errors in menus and toolbars.
* in DIALOG_EDIT_LIBRARY_TABLES::TransferDataFromWindow(), m_contentPanel->TransferDataFromWindow
* is explicitly called to update library tables.
* Before wxWidgets 3.1.x, m_contentPanel->TransferDataFromWindow is not called by wxDialog::TransferDataFromWindow()
* and explicit call is needed.
* Since wxWidgets 3.1.x, m_contentPanel->TransferDataFromWindow is called by wxDialog::TransferDataFromWindow()
* thus creating two successive calls, not supported by m_contentPanel->TransferDataFromWindow.
* The call to wxDialog::TransferDataFromWindow() was just removed, as it is useless in this dialog
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
Also brings horizontal toolbar in line with Pcbnew and Eeschema.
And updates the EDA_LIST_DIALOG to current practices.
This finishes the removal of the active library concept from the
Symbol Editor (started with the new component tree in 5.0).
Fixes: lp:1740717
* https://bugs.launchpad.net/kicad/+bug/1740717
wxDialog calls Show(false) when the dialog is about to be closed, but
KIDIALOG::Show() implementation did not forward the show parameter to
wxRichMessageDialog::Show() invocation. As the parameter was not
specified, the mentioned Show() call always used 'true' as the default
parameter, preventing the dialog from being closed.
Fixes: lp:1782999
* https://bugs.launchpad.net/kicad/+bug/1782999
Don't beep when inserting character from focused grid cell (but
before editor is opened).
Handle reference validation separately from name validation and
separately from user field value validation. The old way of setting
the fieldId on the validator wasn't working because the validator
gets copied.
Run validation when leaving cell. Don't just check for empty
(particularly for fields that CAN be empty).
Fixes: lp:1782917
* https://bugs.launchpad.net/kicad/+bug/1782917
(cherry picked from commit 79e04de)
This allows it to participate in Kiway things such as updating
language or common settings.
Fixes: lp:1779558
* https://bugs.launchpad.net/kicad/+bug/1779558
(cherry picked from commit b3f8478)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
Hotkey options have shifted some options from context-specific to global
hotkeys. This causes conflicts with old hotkey definitions. Instead,
we keep the v5 eeschema/pcbnew hotkeys completely separate. Users can
still import their custom hotkey files from v4.
Fixes: lp:1778408
* https://bugs.launchpad.net/kicad/+bug/1778408
When staging a commit for an object that has already been modified,
there is a Clone() made for the hypothetical entry. We need to free it
if we are not storing a new entry.
When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
Paths based on DEFAULT_INSTALL_PATH do not work on Windows,
as in fact there is no default install path, as in case of Unix-based
systems. In such case, the initial paths point to mingw subdirectories
that normally do not exist on user machines.
The patch changes the initial path values to make them relative to
the executable and follow the current Windows installer scheme.
Fixes: lp:1775796
* https://bugs.launchpad.net/kicad/+bug/1775796
The origin item doesn't have a fixed size. It is constant on the screen but
changes the effective BBox size based on the zoom level.
But we can't simply set it to the maximum size as this causes a splitting degeneracy
when compiling for Debian i386. By modestly adjusting the bbox, we avoid the degeneracy
while keeping the origin visible at all zoom levels
Fixes: lp:1777379
* https://bugs.launchpad.net/kicad/+bug/1777379
During the symbol library table implementation, the legal character
tests for the footprint library table were changed and the forward
slash '/' character became illegal. This change broke editing some
users footprint library tables that already had '/' in library table
nicknames. This change split the library nickname and library item
name illegal character tests.
It happens only when the 'warp and center cursor on zoom' option is disabled.
Was created after modifying the code in EDA_DRAW_FRAME::AdjustScrollBars(),
making EDA_DRAW_FRAME::RedrawScreen2() not working very well.
(partial fix of bug 1562173)
wxGLCanvas::IsDisplaySupported() handles wxGL_{MINOR,MAJOR}_VERSION
attributes only in 3.0.4. Since 3.1.0 the attributes are apparently not
supported, so instead wxGLContext::IsOK() is used (introduced in 3.1.0).
Fixes: lp:1775995
* https://bugs.launchpad.net/kicad/+bug/1775995
There are a bunch of problems with event processing and closing
documents, etc., when enabled. See the bug report for more
info.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
Limit the bbox size of origin view item to item size. This prevents
excessive redraw.
This also side-steps a degeneracy in the RTree calculation under certain
conditions in i386 where multiple, maximum-sized items are degenerate.
Fixes: lp:1774316
* https://bugs.launchpad.net/kicad/+bug/1774316
This fixes some warnings on GCC 8.1:
warning: catching polymorphic type ‘class std::out_of_range’ by value [-Wcatch-value=]
catch( std::out_of_range )
^~~~~~~~~~~~
This fix is along the same lines as:
* ff1802d7a "Fix Coverity "Big parameter passed by value" warnings"
There are three related changes here to harden our handling of threads
in the footprint async loader.
1) Footprint async loader explicitly aborts any remaining loader threads
on exit.
2) We protect the thread join by a mutex
3) We do not pause during no-wait routines
In Cairo mode, this function uses already the alpha color value setting.
Now for low alpha values (usually they are low, as said in many GAL comments),
Cairo mode and OpenGL mode should have a similar look.
Also lock the DeleteAll call with mutext to protect threaded access.
The OpenGL contexts are removed when OPENGL_GAL class is destroyed.
Explicitly deleting all contexts prior to destroying the OPENGL_GAL
class causes an assert when the destructor tries to lock its context
prior to cleaning up OpenGL memory. In most cases, an unhandled assert
in a destructor-called function will simply exit the destructor.
Python thread cleanup will also attempt to close the context. This can
cause a race condition with multiple threads accessing/deleting the
canvas.
Fixes: lp:1774096
* https://bugs.launchpad.net/kicad/+bug/1774096
We limit the minimum zoom to Z=0.3. Minimum preset zoom level is 0.31,
so 0.3 is only reachable using the mouse wheel. Smaller than 0.18, GAL
does not display properly.
Fixes: lp:1773215
* https://bugs.launchpad.net/kicad/+bug/1773215
wxWidgets offers two dialog types: wxFileDialog and wxDirDialog, one
to select files, the other to select directories, but neither of them
handles both. DIALOG_FILE_DIR_PICKER fills that gap.
When starting async processes, we need to have a way to stop the process
before releasing memory. Descoping FOOTPRINT_ASYNC_LOADER while the
threads were still running could cause crashes depending on the memory
structure. To avoid this we define clear procedures for exiting a
running async processes and call these when exiting.
Fixes: lp:1772909
* https://bugs.launchpad.net/kicad/+bug/1772909
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
Remove KICAD_PTEMPLATE environment variable as it's purpose was not
clear and was often poorly defined as the path to the KiCad installed
templates.
Add a new KICAD_TEMPLATE_DIR environment variable which clearly should
be the path of the KiCad installed templates. Make this environment
variable available in the user settings in case the default is wrong
which has been the case in some instances. Use the standard search
stack to set the default system template path which has a much greater
chance of being correct.
Add a new KICAD_USER_TEMPLATE_DIR environment variable which clearly
should be the path of the user defined templates. Users most likely
were not even aware of the old default user path unless they read the
fine manual.
Set template path search stack priority as follows:
* KICAD_USER_TEMPLATE_DIR
* KICAD_TEMPLATE_DIR
* Search stack template paths
Reverse template selection dialog and project path dialog for improved
user experience.
Fixes lp:1543443
https://bugs.launchpad.net/kicad/+bug/1543443
1) hide the status popup when the dialog is brought up
2) forward events from the popup to the canvas so hotkeys work
3) make sure diff pair radius is always 100%
4) fix greyed-out Miter style label
5) make L a hotkey so it works before you start dragging
Fixes: lp:1545856
* https://bugs.launchpad.net/kicad/+bug/1545856
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
This reverts the hotkeys file format to a human readable and VCS
compatible listing by splitting individual hotkey assignments onto
separate lines instead of the single key. This unifies the hotkey format
between the application configuration and export Hotkey routines.
Both hotkey formats remain readable by the same routines.
The tools were being set as idle, whenever an event handler execution
finished (via TOOL_MANAGER::finishTool()). Such approach does not take
into account cases when a tool is active and receives an event causing
another event handler of the same tool to run. When this happend, the
tool has been incorrectly set as idle when the second handler finished
its execution.
In a particular case, invoking the router settings dialog caused the PNS
router to be incorrectly detected as inactive in
EDIT_TOOL::invokeInlineRouter(). Due to that, ROUTER_TOOL::CanInlineDrag()
requested a selection that required disambiguation menu for items
that were modified by the router, but not yet committed. After the drag
tool had finished, the disambiguation menu was eventually shown
with items existing only in the undo buffer. Removing such item lead to
track DLIST corruption, effectively erasing all tracks.
Fixes: lp:1767826
* https://bugs.launchpad.net/kicad/+bug/1767826
The opencascade patch intrusively checked against libraries but broke
some build scripts. This restores the default cmake OCE behavior that was
changed by 2bab30d9a and makes the OpenCascade search truly secondary.
Minor improvement in polygon calculation to use consecutive points
rather than casting to a full segment. Avoids division except when it
will not create a denormal.
Footprint filter provides two Regex filtering options. One for keywords
and one for footprint keywords. The footprint keywords (contained in
the symbol files) need explicit '*' at the beginning and end of the
filters to allow matching start/end. Type-in filters should search
implicitly matching any wildcard substring.
Fixes: lp:1769931
* https://bugs.launchpad.net/kicad/+bug/1769931
Recent versions of wxWidgets wxStandardPaths::GetUserConfigDir() correctly
append ".config" on Linux build which was incorrect as the current code
already appended it to the path. Add a check to see if ".config" is the
last path and append as required.
Check for XDG_CONFIG_HOME environment variable on all platforms not just
Linux.
Fixes lp:1769145
https://bugs.launchpad.net/kicad/+bug/1769145
Changes SHAPE_CONVEX to SHAPE_SIMPLE to better reflect the limitations.
Changes SHAPE_LINE_CHAIN::PointInside calculation to allow points
strictly inside a line chain
Fixes: lp:1768862
* https://bugs.launchpad.net/kicad/+bug/1768862
The only required scroll event handler is wxEVT_SCROLLWIN_THUMBTRACK,
which is responsible for dragging the scrolling sliders. One of the
remaining ones is also called when mousewheel is scrolled (MSW only) and
due to that overrides the new view setting with view settings computed
from the sliders position.
Fixes: lp:1767604
* https://bugs.launchpad.net/kicad/+bug/1767604
Footprint filters need to be able to match the start and end of strings.
The standard wildcard filter implictly adds "*" to the start and end of
match strings, so we create a derived class that requires an explicit
"*" or "?" to match wildcards.
Fixes: lp:1751565
* https://bugs.launchpad.net/kicad/+bug/1751565
KiCad read incorrect value for window position and it's size at very
first launch, which results in invisble/inaccessible window on Mac OSX.
Set correct default values for these settings fixes this issue.
And fix a typo in comment.
Corrects an error in polyline estimation
Syncs graphics to world PNS by whole layer set rather than
individual layer at a time.
Prevents reloading of full pns TOOL_BASE during reset of tools unless
the tool is being activated.
Fixes: lp:1766626
* https://bugs.launchpad.net/kicad/+bug/1766626
It is a C-style assert causing application termination when triggered.
Certain systems display pcbnew window shrinked so much, that the canvas
size is 0x0 pixels. The only problem with that is the window needs to be
resized.
Fixes: lp:1767031
* https://bugs.launchpad.net/kicad/+bug/1767031
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
The hotkey fix committed in 53b1ec81 broke non-us keyboards. Change the
hotkey help hotkey from '?' to Ctrl+F1 to prevent the hotkey list dialog
from being shown when placing a bus wire junction in Eeschema and when
changing the track posture in Pcbnew. This is still broken in the GAL
framework.
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
wxASSERT(), contrary to assert() does not terminate the program when
triggered. As assertions in ACTION_MANAGER are not critical and should be
treated as warnings - there is no need to close the program.
Also update the rest of the symbol-chooser usage to current
specs, including examining the timestamp to see if the list
needs loading at all.
Partial fix to: lp:1760936
* https://bugs.launchpad.net/kicad/+bug/1760936
The change track posture hotkey '/' was getting interpreted as the show
hotkey list shortcut '?' on windows. This fix is temporary hack to fix
the problem which much more involved than the simple #ifdef/#endif used
to fix this issue.
Add key code tracing to help analyze key codes for future development.
This is due to the fact the same ID was used for menuitems in menubar,
and tools in toobars.
Especially, some items were not compatible due to different attributes.
Windows does not accept the same ID for 2 items inside the same frame.
It creates issues (items not shown, Asserts, ...)
Fixes issue where TestSegmentHit falsely skips segments that are
slightly off 45°. Improves speed of function by exiting on non-hits
more quickly. Simplifies function and removes magic numbers.
This is so that tools checking for a selected item won't think
the menu has been cancelled if the selection was in a submenu.
Fixes: lp:1758372
* https://bugs.launchpad.net/kicad/+bug/1758372
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
Clearing bClError flag in NumericEvaluator::parseOk() made the
expression look valid, even if the flag has been set for a previous
token. Now it is cleared before an expression is parsed and verified
after parser finishes.
Fixes: lp:1756995
* https://bugs.launchpad.net/kicad/+bug/1756995
For some DRC checks, the location of the marker is not the location
of the first item in the resulting DRC_ITEM, so centering the screen
on PointA of the DRC_ITEM can be confusing.
DIALOG_SHIM stores the dialog position, so every time it is shown, it is
displayed in the same location. This caused problems on multidisplay
setups, as dialogs could show up off the screen if the original display
has been detached in the meantime, effectively making them inaccesible
to the user.
Fixes: lp:1756623
* https://bugs.launchpad.net/kicad/+bug/1756623
- changed EAGLE_UNIT enum names from EAGLE_* to EU_*
- renamed ToNanoMeters() to ConvertToNm() and added a comment
- added ToMils() and ToNanoMeters() method
It's too expensive to fetch the timestamps when the github
server is busy. See Dick Hollenbeck's comments at the top of
github_plugin.cpp for more info.
Also adds some safety to the other caching algorithms after
seeing github_plugin's wild-west usage of the kicad_plugin.
Fixes: lp:1753143
* https://bugs.launchpad.net/kicad/+bug/1753143
Normal SetValue() call would temporarily change the displayed
value, but as soon as the text widget receives focus again, the original
expression (not evaluated) is restored.
To avoid this, the original expression is cleared in the associated
NumericEvaluator object.
Since we are going to inspect every item for these calls, we don't
need to use the RTREE search, which is expensive with high item count.
This results in ~50% improvement in layer switching time in GerbView
when working with a set of large Gerber files.
If ',' is used as decimal separator by the current locale a '.' is also accepted.
Also add support for units "mi", "th" and "in" as described in the documentation of pcbnew.
Fixes: lp:1751315
* https://bugs.launchpad.net/kicad/+bug/1751315
Too many external applications fail to touch the parent directory.
Also removes FP_CACHE_ITEM lastMod times and dirty flags as we've
always loaded libraries atomically anyway.
Claws back some of the performance lost by being more efficient
with cache management for sequential calls to Enumerate and then
Load.
Fixes: lp:1750936
* https://bugs.launchpad.net/kicad/+bug/1750936
Add a library selector to the save dialog. Initialize it to the
footprint's library. This way a straigh-up save will do what's
expected.
However, the user can still select the active library (or any
other library) if they really did want to move the footprint.
Fixes: lp:1750918
* https://bugs.launchpad.net/kicad/+bug/1750918
Also adds indicators in layers palette for feedback.
Also generates sized images for all indicators instead of using
scaled bitmaps (which didn't look great).
Also fixes a completely unrelated typo in a UI string.
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
This should fix a bunch of bugs with run-time generated sizes
that can grow larger than their minimums in other configurations.
Also fixes a related bug in the WX_HTML_REPORT_PANEL where the
min size was set in the wrong place.
Fixes: lp:1692442
* https://bugs.launchpad.net/kicad/+bug/1692442
Move sketch mode stuff from Display Settings to View menu.
Move Icons in Menus from View menu to General Preferences.
Move Icon Scaling from Display Settings to General Preferences.
Regroup some items in both dialogs for better comprehension.
Also fixes:
- forcing the annotation scope to "full schematic" when run
as a prerequisite to Generate Netlist.
- a long-standing bug where displaying extra items in a dialog
would mess up the height of the HTML_REPORT_PANEL (becasue
we were setting the html window's height rather than its
parent flexgrid.
- initializing the annotation radio buttons to safe values
(full schematic and keep existing)
Fixes: lp:1750062
* https://bugs.launchpad.net/kicad/+bug/1750062
All calls to {save,apply}ViewControls() have been replaced with a new
method: setActiveState(). The advantage is that setActiveState() always
saves view controls settings to the tool that set them. As long
as setActiveState() is called every time there is a tool context
switch, the changes are kept up-to-date.
Fixes: lp:1748613
* https://bugs.launchpad.net/kicad/+bug/1748613
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
It affected just started tools that did not have cursor settings
stored, so could not be reverted after the context menu is gone.
Fixes: lp:1748613
* https://bugs.launchpad.net/kicad/+bug/1748613
Smartens the cache freshness checking, and adds checksums of
constituent-directory last-mod-dates to the footprint info
list.
Also inserts the dataPtrs into the list at the same time as
the text to keep wxWidgets from measuring the width of the
text twice (yes, really). And converts the list to default-
column widths in case the wxWidgets patch is present to
greatly speed list creation (by not measuring all that text).
On my machine drops the first-load time from 4s to 2.5s and
the subsequent-load times from 2.5s to < 1s. With the
wxWidgets patch subsequent-loads become near-instantaneous.
Many had already been fixed but weren't working on Mac because
of the DIALOG_SHIM hack (now fixed). Others hadn't been updated
yet. Also includes some cleanup for elipses in buttons and
layout.
Fixes: lp:1748506
* https://bugs.launchpad.net/kicad/+bug/1748506
Apparently calling wxDC::DrawEllipse() with parameters resulting in a
circle with radius equal to 0 lead to printing problems.
Fixes: lp:1746210
* https://bugs.launchpad.net/kicad/+bug/1746210
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
The undo/redo operations are essentially the same as for
UR_CHANGED: we store both the origin marker item and a copy
of it and flip back and forth between the two. This also
required the implementation of clone() for the markers.
The ORIGIN_VIEWMARKER is moved from being a subclass of
EDA_ITEM to BOARD_ITEM to facilitate the use of a UR_CHANGE-
like implementation without having to know the internals
of the ORIGIN_VIEWMARKER.
In the command processors, the setting of the origins is
broken into two parts: one for UI-level access which includes
setting up undo, and one for low-level access which does not.
The undo/redo code itself of course uses the lower level.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
It fixes the case when a tool sets up a menu and starts its event loop
waiting exclusively for menu events. If none arrived, the tool was stuck
in the loop forever.
Fixes: lp:1744915
* https://bugs.launchpad.net/kicad/+bug/1744915
The fix for this is a crude hack. The assertion is caused by the fact
that KICAD_MANAGER_FRAME is not a KIWAY_PLAYER. The only way to fix
this correctly is to derive KICAD_MANAGER_FRAME from KIWAY_PLAYER so
the window ordering can be corrected and the dialog can be called using
ShowQuasiModal().
Fixes lp:1744228
https://bugs.launchpad.net/kicad/+bug/1744228
Three interrelated issues:
1) Implement an undo/redo type for renames so that we know to delete
the old lib entry and add a new lib entry
2) When doing so (for the undo/redo OR the original edit), we must
make a copy of the 'original' LIB_PART which is used for revert, and
hand it to the new lib entry
3) When comparing a modified component tree item with the current item
we must also check for aliases.
Fixes: lp:1743857
* https://bugs.launchpad.net/kicad/+bug/1743857
Fixes: lp:1744371
* https://bugs.launchpad.net/kicad/+bug/1744371
Fixes: lp:1744373
* https://bugs.launchpad.net/kicad/+bug/1744373
This fixes the layer comboboxes, the copper zones properties
dialog, and the differental-pair icon in the htoolbar.
Fixes: lp:1741049
* https://bugs.launchpad.net/kicad/+bug/1741049
Gal mode: graphic cross-air cursor moved on items when clicking on & DRC error, like in legacy mode.
Make popup menu shown when right clicking on a DRC error item working.
OSX activates windows before telling the application, so there's
no good way to implement wxWidgets window enable/disable. This
patch keeps the quasi-modal dialog and its parent windows order
in the z-list fixed, and re-activates the quasi-modal dialog
whenever the OS activates the parent window.
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
Fixes: lp:1738875
This patch saves hotkeys to default file when a hotkeys file is
imported, so they remain persistent in future sessions.
Also, a few minor tidy ups (e.g. c++11 nullptr) internal to
common/hotkeys_basic.cpp.
- Add helper methods for DPI-independent sizes
- Make splitter sashes visible on macOS
- Remove SetSizeInChars() - wx has a built-in way that I missed
- DIALOG_CHOOSE_COMPONENT: DPI-indep splitter sizes
- DIALOG_RESCUE_EACH: DPI-indep default size and sensible HTML window
size
- COMPONENT_TREE: DPI-indep sizing
- DIALOG_FP_LIB_TABLE, DIALOG_SYMBOL_LIB_TABLE
If the client tool indicates it isn't happy for us to continue
(because, for instance, the user has cancelled the Zone Properties
dialog), then make sure we don't capture the mouse.
Fixes: lp: 1740780
* https://bugs.launchpad.net/kicad/+bug/1740780
The Windows drive specifier C: was being interpreted as a valid URL by
wxURI which was performing a URL comparison instead of a file comparison
which always failed in LIB_TABLE_BASE::FindRowByURI(). Change test for
URI to search string for "://" to determine if the comparison should be
a URI (string) comparison or a file (wxFileName) comparison.
Don't run final rescue unless the user performs the remapping.
Move the OSX dialog fix ups later so they come after some wxWindow
deferred processing.
Also provides a facility for doing a selectAll in each text field
so that tabbing between text fields behaves correctly.
Fixes: lp:1599157
* https://bugs.launchpad.net/kicad/+bug/1599157
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the common, 3D viewer, CvPcb, and Eeschema code paths.
Updated the use of component to symbol.
Replace all instances of "component" and "part" with "symbol" when
referring to schematic and library symbols.
Replace all instances of "component" with "footprint" when referring to
board and library footprints.
Minor dialog layout fixes to some of the dialogs impacted by the UI
string changes.
Remove redundant sizers from environment variable dialog.
Improve sizers and layout spacing of environment variable and environ-
ment variable edit dialogs.
Remove path from dialog box titles since environment variables are not
limited to file paths.
Improved help messages for both environment variable and environment
variable edit dialogs.
Restore highlighting of externally defined environment variables.
The remapping utility would create a new project specific library when a
symbolic link pointed to a library already defined in the symbol library
table. Now the comparison checks to see if the library path and file
name are actually a symbolic link if the file names are not the same when
the symbol library table entry is a file name rather than a URL. URLs
are simple string comparisons.
Disable the remap button after the remapping completed.
Remove some commented out code from the edit symbol in schematic dialog.
Fixes lp:1738634
https://bugs.launchpad.net/kicad/+bug/1738634
In theory there should be no polygons with empty outline, but as you see
there was at least one leading to a crash.
Fixes: lp:1739455
* https://bugs.launchpad.net/kicad/+bug/1739455
Don't apply missing-mouse-up logic to mouse-down events. The
logic depends on mouse-state, and the OS-synthesized mouse-up
and mouse-down events from a tap don't contain any state.
Fixes: lp:1737010
* https://bugs.launchpad.net/kicad/+bug/1737010
The polygon drawing routing in the OpenGL-GAL did
not plot polygons which are "closed", i.e. have a segment
from their last point to their first point, correctly.
That segment was omitted.
This commit fixes this bug.
The OSX implementation needs to be poked to update the
brightening / unbrightening during running of the
disambiguation menu. (FWIW, now that I've finally seen
it in action, it's a REALLY cool feature.)
Fixes: lp:1715440
* https://bugs.launchpad.net/kicad/+bug/1715440
The OPENGL_GAL::drawPolygon function and all functions using it
did not respect the isFillEnabled member set by
GAL::SetIsFill. This is fixed by this patch.
There were two problems in the triangulation caching
of SHAPE_POLY_SET:
First there was a double free:
While SHAPE_POLY_SET implements the copy constructor,
it did not implement the operator=, which resulted
in the default operator= being generated by the
compiler. The default operator= copied the member
m_triangulatedPolys, which is a std::vector of pointers.
So after operator= execution, there are two SHAPE_POLY_SET
having pointers to the same TRIANGULATED_POLYGONs, each
of them deleting them in their destructors. This led
to segfaults, because calling
TransformShapeWithClearanceToPolygon on a Zone
uses operator= to copy the contained SHAPE_POLY_SET.
The new SHAPE_POLY_SET then went out of scope and
deleted the cached triangulation within the Zone.
This first problem is fixed by implementing operator=
for SHAPE_POLY_SET.
Second, there was a memory leak: Calling
"CacheTriangulation" on a SHAPE_POLY_SET,
then changing the polygon and then calling
"CacheTriangulation" again led to
leaking the
triangulations generated in the first call.
This second problem is fixed by holding
the cached triangulations in a unique_ptr.
Moved the code handling text overbars to a single function
(ProcessOverbars()) to replace similar pieces of code trying to do the
same thing.
Fixes: lp:1735906
* https://bugs.launchpad.net/kicad/+bug/1735906
This target seems to only create empty makefiles, tested on linux. And I
can not find any references to it in any of the current CMakeLists. Lets
remove it.
Remove developer email addresses as requested on the developers mailing
list.
Update source contributor list.
Add place holders for symbol and footprint library contributors.
Remove unnecessary wxT() macros.
LAYER_NON_PLATED to LAYER_NON_PLATEDHOLES
LAYER_PADS_HOLES to LAYER_PADS_PLATEDHOLES
LAYER_PADS to LAYER_PADS_TH
and add comments and fix a render issue in gal mode for non plated holes.
Change action message color from "darkgreen" to "dark green" as the
former does not exist on windows and results in debug log warnings.
Change the information color from "grey" to "dark grey" for improved
contrast with the white backgrounds. This may need to configurable
on systems where the HTML window has a dark background color.
Don't translate HTML formatting strings.
Change the legacy schematic plugin to preserve illegal LIB_ID characters
when load schematics prior to version 4.
Check for illegal LIB_ID symbol names during project rescue. Rename and
rescue any symbols with illegal LIB_ID names.
Add static methods to LIB_ID object for testing for and fixing names
with illegal characters so there is uniform code for doing so.
Update the Eagle plugin symbol loader to fix symbol names using the new
LIB_ID fix illegal names method.
Fixes lp:1732236
https://bugs.launchpad.net/kicad/+bug/1732236
The NormalizePath() function always added a trailing separator when
normalizing environment variables. Now it checks an environment
variable for a trailing separator and only adds one if it doesn't
already exist.
May be a partial fix for:
Fixes lp:1733217
https://bugs.launchpad.net/kicad/+bug/1733217
Raise() invokes SetFocus() on Windows OS, leading to an API error
(check wxWindowMSW::SetFocus() in wxWidgets/src/msw/window.cpp as
of wxWidgets 3.0.2). In certain cases it leads to a crash.
SEARCH_STACK is a deprecated method for getting the list of paths where
one could look for a file. Instead it tries the project path and
environmental variables.