*) Implement a framework for "Data Load On Demand".
*) Implement FP_LIB_TABLE* PROJECT::PcbFootprintLibs(), which is the first
prototype.
This allows the project specific footprint tables to be part of the Module Editor
when invoked from Eeschema.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
(for instance, when a footprint from the currently edited board is loaded in the footprint editor, and when the board is cleared or reloaded)
In footprint editor, the net names are no more shown od modifiable (becuase the footprint editor does not know anything about net names.
This change should allow the changes planned in pcbnew.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
comment for GITHUB_PLUGIN which should flow into Doxygen output.
*) Rewrote:
PCB_BASE_FRAME::Save_Module_In_Library(): now uses fp-lib-table and PROPERTIES.
PCB_EDIT_FRAME::ArchiveModulesOnBoard(): now can archive to any writable library type.
PCB_BASE_FRAME::SelectLibrary(): is now generic for selecting a library, not just the active library.
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
*) Set environment variable KISYSMOD before loading FP_LIB_TABLE so that
FP_LIB_TABLE::ROW::SetFullURI() can do substitution up front.
*) De-emphasize the lib path in some of the footprint frames but keep it
so the footprint editor can export a current library to another.
You can even export a GITHUB library to a pretty library for local
installation.
*) Start the PLUGIN options editor.
*) Enhance cursor positioning in DIALOG_FP_LIB_TABLE.
* Add save table and set project path environment variable code to
FP_LIB_TABLE object.
* Add code to Pcbnew and CvPcb to set project path environment variable.
* Create empty footprint table in Pcbnew when new board created.
* Save current project specific footprint library table to path on file save
as or empty project path.
* Fix a bug in Pcbnew in file save function that would silently overwrite
an existing board file.
* Disable selecting the current library in the module editor when there are
no libraries defined.
* Catch exceptions and report errors when writing footprint library tables.
* Fix Boost build CMakeFile to fix bug when bootstrapping a Boost build in
MSys.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* Add footprint library table loading to footprint editor.
* Overload FOOTPRINT_INFO::ReadFootprintFiles() to read footprints from the
footprint library tables.
* Fix a bug in FP_LIB_TABLE::IsEmpty() when the table has a fallback table.
* Add code to FOOTPRINT_EDIT_FRAME to use footprint library tables.
* Add an optional build time version of PCB_EDIT_FRAME::loadFootprints() to
populate netlist footprints from footprint library table.
* Remove adding footprints to board whenever GetModuleLibrary() is called and
move loading locally as required.
* Add missing source file license comments and coding policy fixes.
* Encapsulate most of the MODULE class.
* Start encapsulating the DIMENSION class.
* Lay some groundwork for EDA_TEXT encapsulation.
* Move cleverly hidden MODULE functions into class_module.cpp.
* Use std::swap to exchange TEXTE_PCB values for undo/redo.
* Remove unused members from MODULE class.
* The usual coding policy and documentation fixes.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
their type, by using the more abstract PLUGIN::Footprint*() functions.
This is an intermediate phase only, other changes will be necessary as library table support comes in.
Encapsulate usage of library path searching, since that will go away as library table support comes in.
Add FOOTPRINT_EDIT_FRAME::{get,set}LibPath() and FOOTPRINT_EDIT_FRAME::{get,set}LibNickName() functions
to provide this encapsulation.
* Add footprint methods to PCB_IO.
* Add FP_CACHE and FP_CACHE_ITEM for handling new footprint library design.
* Add code to save legacy libraries in new format.
* Change behavior of BOARD_ITEM::GetLayerName() to return the default layer
name when the item does not have a BOARD as a parent.
* Minor changes to the module output formatter when writing to module library
files (no BOARD as parent).
* Add new (and some that I forgot along the way) CMake flags to
EDA_BASE_FRAME::CopyVersionInfoToClipboard().
* Add -Wno-narrowing to GCC flags to stop GCC 4.7 from complaining about
a conversion from int to unsigned in the Boost polygon library.
* Add INPUT_STREAM_READER to richio.cpp to allow using any object derived
from wxInputStream as a LINE_READER (needs to be validated).
All: press ctrl+shift key when moving the mouse allows the graphic cursor to be moved outside the grid.
(useful to place graphic objects, texts in any position, regardless the current grid)
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
* Fix bug in PCBNEW dialog_pad_properties.cpp that I introduced several days ago.
The m_Master_Pad stuff is stored in the PCB_EDIT_FRAME's BOARD_DESIGN_SETTINGS,
not in the FOOTPRINT_EDIT_FRAME's BOARD_DESIGN_SETTINGS (i.e. not stored in
the module editor's dummy BOARD). Now we properly initialize the
DIALOG_PAD_PROPERTIES::m_Pad_Master reference to the correct master pad
dope, instead of to the dummy module BOARD's master pad, which is not used.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
* Use version of DateAndTime that returns a wxString and delete the
version that takes a char* as it is no longer required.
* Merge StrNumICmp() and StrLenNumICmp() into StrLenNumCmp() to create a
single function for comparing strings with integers and remove a lot
of duplicate code.
* Remove unused strupper from string.cpp.
* Use wxArrayString for sorting the EDA_LIST_DIALOG contents.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Move various locate functions into the appropriate board item object.
* Unified best zoom for all frames derived from PCB_BASE_FRAME.
* Remove track.cpp as it is no longer needed.
* Dead code removal.
* Remove scary frame window pointer member from board item objects.
* Add draw bounding box to gerber draw item for debugging purposes.
* Check user write permissions before saving project, board, and footprint
library files.
* Append read only to file name and path in title bar when the user
does not have write privileges.
* Rename class WinEDA_ModuleEditFrame to FOOTPRINT_EDIT_FRAME.
* Lot's of Doxygen comment and coding style policy fixes.
* Raise 3D frame in PCB editor and module editor instead of displaying a message
dialog indicating that the 3D viewer is already open.
* Raise 3D viewer and module viewer in CVPCB to mimic the behavior changed in
PCBNew.
* Set focus to OpenGL canvas when creating 3D viewer so mouse wheel events
are handled on Windows without having to click on the canvas.
* Rename 3D viewer frame class from WinEDA3D_DrawFrame to EDA_3D_FRAME.
* The usual smattering of coding policy fixes.
* Fix grid select box update bug on context menu.
* Fix via size and track width select box update bugs.
* Fix layer pair indicator button update bug.
* Fix auto track width tool bar control enable bug.
* Fix via size and track width select status bug in context menu.
* Fix layer select box and layer control widget select bug when current
layer is removed.
* Add virtual function to notify objects derived from EDA_DRAW_FRAME that
the units setting has changed.
* Coding policy class naming fixes.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
inches and mm, the industry is crazy enough to force us with mixed
design. For example I routinely use imperial units for track size and
clearance, but drilling is strictly a metric issue...
So I added a little parser to recognize a suffix specification in the
unit text boxes... so you can put in things like:
1in (1 inch)
1" (idem)
25th (25 thou)
25mi (25 mils, the same)
6mm (6 mm, obviously)
The rules are: spaces between the number and the unit are accepted, only
the first two letters are significant.
As a bonus, it also recognize the period (.) as a decimal point
substituting it with the correct locale character (there was a wishlist
for it, IIRC). Most useful for number pad fans :D
* Make USE_WX_ZOOM clipping routine actually clip rather than just test
if line needs drawn.
* Clean up as many USE_WX_ZOOM #ifdefs as possible.
* Minor coordinate rounding improvements.
* Minor scrolling and panning improvements.
* Remove unused KicadGraphicContext object code.
* Implement code to allow wxDC to handle coordinate conversions between
device and drawing units.
* Add build settings to enable wxGCDC for wxGraphicsContext testing.
* Remove wxAUI conditional build cruft as it is now required to build
Kicad.
* Fix scroll increment size regression to prevent jumping around the
zoom center position.
* Add find GDI+ cmake module for building on WXMSW when wxGraphicsContext
is enabled.
Dick Hollenbeck
jean-pierre charras
Orson
Wayne Stambaugh
Jacobo Aragunde Perez
Miguel Angel Ajo
Hauptmech
Marco Mattila
Marco Serantoni
stambaughw