69858ab4c0
Remove shared wxString instance in DRC
...
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string. Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards. If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
(cherry picked from commit 5327b10064
2022-06-21 10:27:21 -07:00
f8c92e355b
Plating thickness appears on both sides of hole wall.
2022-04-04 21:51:30 +01:00
ff604cc6a3
Pull some fixes back from master.
...
Mostly wxT(), but also some performance, and some for better response
to Cancel button.
(cherry picked from commit 5c63df28e4
2022-03-18 12:49:54 -07:00
b0f8055377
Revert "Pull some fixes back from master."
...
This reverts commit 5c63df28e4
2022-03-17 16:21:37 -07:00
5c63df28e4
Pull some fixes back from master.
...
Mostly wxT(), but also some performance, and some for better response
to Cancel button.
2022-03-16 15:15:09 +00:00
856cc26d4c
Allow vias the same same-net waiver that pads have for hole clearance
...
Note that in 7.0 we have physical_hole_clearance rules to give a bit
more expressivity here.
Fixes https://gitlab.com/kicad/code/kicad/issues/9420
2021-10-18 18:09:40 +01:00
b52529521e
Replace individual LIB_* shapes with LIB_SHAPE (based on EDA_SHAPE).
...
Also moves to more capable FILL_T model that can be shared.
2021-10-15 12:45:43 +01:00
3b16c38756
Coverity issue fixes.
...
Fix Coverity issues 157138, 338547, and 338716.
2021-09-08 14:51:27 -04:00
fec34e8dd8
Get rid of an extraneous layer parameter.
...
Also adds a bit of nullptr safety.
2021-08-23 20:00:17 +01:00
d34e9e8946
Code safety.
2021-08-13 21:28:11 +01:00
f4a7565b9c
fix a compil warning
2021-08-11 08:16:26 +02:00
a208dac8d8
Convert hole clearance tests from NPTH holes to all holes.
2021-08-09 22:26:00 +01:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
00ed75b891
Fix DRC performance with multi-layer keepout zones.
...
The main issue was a parameter mismatch which caused On^2 behaviour
for zone layers.
But there are several other performance optimizations here, along
with status bar updating for zones while running the dissallow test.
Fixes https://gitlab.com/kicad/code/kicad/issues/8521
2021-06-02 14:11:43 +01:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
b65b1f8e9c
Revert NPTH commit, and add some comments.
2021-04-26 17:33:49 +01:00
e3eacafbcb
Run hole clearance tests on NPTH pads, but not copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8295
2021-04-25 17:55:43 +01:00
2cde76a191
Don't do any hole clearance testing within a single footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-11 16:03:16 +01:00
3450610977
Add ability to allow thermal vias to be implemented as pads.
...
This is mostly just for CADSTAR. Since we don't (yet) have general
purpose footprint attributes, this reuses the "net tie" hack.
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-09 14:02:13 +01:00
6d6765cdaf
Improve DRC status reporting.
...
1) Don't report on tests not run.
2) Don't cancel subsequent tests because the current test didn't
have any constraints
3) Exit a little bit quicker when cancelled
Fixes https://gitlab.com/kicad/code/kicad/issues/7724
2021-02-27 13:44:45 +00:00
4ede4e061e
More DRC performance work.
...
Push DRC zone RTrees into BOARD so that they can also be used by
insideArea.
All these caches are a bit of an encapsulation leak, but they make a
significant impact on performance.
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-27 11:45:04 +00:00
d523129929
Minor performance improvements.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 17:58:08 +00:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
8571687f51
Upgrade place via tool to new DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7358
2021-02-01 23:00:13 +00:00
23c6dbff38
Need to check track/track clearance
...
The misplaced else prevented non-track/track intersection clearances
from being reported
Fixes https://gitlab.com/kicad/code/kicad/issues/7376
2021-02-01 10:08:27 -08:00
2d8cac658e
Allow negative clearances to signal supression of DRC test.
2021-01-23 00:10:01 +00:00
da4b269783
Make sure pad local clearances get in to m_worstClearance.
2021-01-13 12:37:20 +00:00
33aa6edb01
Don't run clearance tests on unflashed NPTH pad layers.
2021-01-04 00:03:21 +00:00
018c17399d
SNR.
2021-01-01 23:17:49 +00:00
8300e17b69
Fix botched attempt to report hole violations between no-net items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6851
2020-12-26 16:24:51 +00:00
af2219ba7f
Finish implementation of hole clearance checking.
...
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
2020-12-25 22:32:19 +00:00
4c5567a627
Allow colliding pads in netties as well as graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6584
2020-12-05 19:44:02 +00:00
dadfe03804
Reinstate 5.1 net-tie hack since "real" net-ties got pushed to 7.0.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6556
2020-11-30 16:11:15 +00:00
3989c19c41
Don't test pad:track clearances in pad tester.
...
They've already been tested in the track tester.
Fixes https://gitlab.com/kicad/code/kicad/issues/6554
2020-11-30 14:38:06 +00:00
e09271ca0e
Fixes for hole clearance and hole-to-hole tests.
...
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
2020-11-29 23:35:23 +00:00
e4d0ffd607
Retire old SKIP_STRUCT filtering.
...
We already added the checkedPairs stuff which deals with a:b vs b:a
better, and the SKIP_STRUCT version had side-effects between the two
tests.
Fixes https://gitlab.com/kicad/code/kicad/issues/6539
2020-11-29 00:08:23 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
533d344e3f
Honour pad falshing when colliding with DRC RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6443
2020-11-19 23:55:14 +00:00
bfc4afc506
Restore the 5.1 NetTie hack.
...
We really need to do first-class net ties....
Fixes https://gitlab.com/kicad/code/kicad/issues/6416
2020-11-17 20:07:21 +00:00
b2d86ec7c9
Don't double-check DRC clearances (a:b and b:a).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6417
2020-11-17 16:58:39 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
ae9afdd169
SNR. (Mostly for progammers, but a little for user messages.)
2020-11-02 16:20:00 +00:00
c351b3c31f
Naming conventions.
2020-11-01 14:12:35 +00:00
Seth Hillbrand
Jeff Young
Wayne Stambaugh
jean-pierre charras
Marek Roszko
Ian McInerney