63d4d84aaa
pcbnew, router: fix a crash and some other issues related to microvias and blind/buried vias
...
- fix crash when trying to create a microvia from a internal layer (boards with > 4 layers)
- fix a bug that allowed to create a non through hole via on only one layer
- fix a bug that allowed to create a microvia on non adjacent layer pair
- when placing a via and selecting the target layer from dialog, show only allowed layers.
Fixes #9477
https://gitlab.com/kicad/code/kicad/issues/9477
2021-10-29 17:54:04 +02:00
4afb59fda0
Added feature to switch between router modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9414
2021-10-28 22:46:05 +00:00
4a9b3d9673
PNS: clear leftover vias from previous trace in DP placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9283
2021-10-27 21:58:42 -04:00
36d11f745e
Update ratsnest while dragging footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-10-25 21:45:30 +01:00
328d3d0d77
PNS: Fix rule resolution when starting from PTH
...
Have to use the routing start layer, not the first
layer of the PTH, to get the appropriate sizes
2021-10-23 22:46:31 -04:00
3b18dce911
Remove vestigal setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9444
2021-10-23 22:12:25 -04:00
2a6c73b8df
Check for hole before highlighting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9423
2021-10-19 11:25:00 -07:00
e9205a0740
Fix mistaken comparison in highlighting
...
Need to compare between elements colliding
Fixes https://gitlab.com/kicad/code/kicad/issues/9413
2021-10-18 13:38:27 -07:00
faba2b06c2
Lock track width after placing segment
...
We don't want to allow the full track width to change after placing a
segment when we are in follow-segment mode. This would require either
ripping up and re-solving the existing track or allowing potential DRC
errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/9395
2021-10-14 09:21:14 -07:00
35e90d0cf4
Allow changing router mode while routing
...
Keeps shove active even when not using to allow switching modes during
routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/9342
2021-10-12 09:55:34 -07:00
7f1247a23c
Update track width when changed
...
Tracks starting from pads should change in response to the track width
changing despite having the "follow existing track" width selected.
2021-10-12 09:55:34 -07:00
4d6b1a4e36
pns_diff_pair_placer: fix empty message when a signal of a pair is not found.
...
Fixes #9334
https://gitlab.com/kicad/code/kicad/issues/9334
2021-10-08 14:57:01 +02:00
a8ec3b58ed
Use via's real drill value for hole size
...
If the via drill is "Default" be sure to get the default value rather
than the placeholder
Fixes https://gitlab.com/kicad/code/kicad/issues/9313
2021-10-06 11:00:58 -07:00
2e120528c8
Length Tuner: Allow single meander when it fits on its own
2021-09-28 18:50:31 +01:00
71156368c9
Length Tuner: Allow controlling the side of the meander using the cursor
...
Also fixes an issue that did not allow single meanders to be placed
2021-09-28 18:50:31 +01:00
726f9ebe3d
Pcbnew: Router tool should not block drag selection when idle
...
The other drawing tools allow drag selection while idle. Also, it makes
it more obvious to the user when accidentally drag selecting while
routing than just doing nothing on a drag with the routing tool selected
and idle.
2021-09-27 16:05:13 +00:00
5f3c67bd2b
Fill in some missing GetMsgPanelItems and make some others consistent.
...
Also expunges a std::vector<MSG_PANEL_ITEM> cover type.
2021-09-27 00:23:40 +01:00
a2ad204f4b
Fix off-by-one in AssembleTuningPath
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9003
2021-09-22 20:25:22 -04:00
be799b49a8
Fix equality in dp matching
...
A single count is found when dp ends with matching char. .Right(0) will
return an empty wxString() which is still valid
Fixes https://gitlab.com/kicad/code/kicad/issues/9206
2021-09-21 19:47:15 -07:00
cf53b053a1
Improve handling of dragging around locked segments
...
Locked segments now are not modified if they weren't the start item.
If a locked segment is the start item, it is automatically unlocked.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9145
2021-09-21 22:38:53 -04:00
22a29a42cf
Generalize net DP matching
...
The requirement of 1-2 numbers following P/N or +/- was arbitrary and
not needed. We also add the _ to allowable suffixes to permit DP
matching of auto-renamed nets
2021-09-20 15:30:47 -07:00
dc1fd3d9ba
PNS test app: Add logging information for curved track routing
2021-09-20 20:35:24 +01:00
4d478d6f17
Fix ordering of initialization in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9161
2021-09-14 07:48:02 -04:00
fdfecf5932
Don't push view control settings to the previous active tool.
...
See further comments in bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9147
2021-09-13 13:28:05 +01:00
092cdc0bb5
Move 45° limit to hotkey
...
This assigns the "Tab" key to a general pcbnew 45° limitation. Limit
can be enabled/disabled using context menu as well.
Removed the user preference for 45° limitation on graphic lines as that
is overlapping with the general limitation, which is not an editing
preference so much as a temporary adjustment to tool action.
Related to https://gitlab.com/kicad/code/kicad/-/issues/8490
2021-09-05 13:42:51 -07:00
a03b6f6fc9
router: use tail start point when saving the FIXED_TAIL
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8771
2021-08-25 00:36:34 +02:00
4c17b7ab46
WALKAROUND::Route Check if path is empty before stepping
...
singleStep expects a path with at least one point.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9020
2021-08-24 20:17:19 +01:00
09ea630d8e
Don't log a potentially invalidated item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9006
2021-08-21 12:24:41 -04:00
aa67abb681
PNS::NODE Use PointCount instead of calculating segment index manually
...
There is no need to manually calculate the segment index - we know
that the last point that was added is the start point of the segment.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8945
2021-08-13 19:09:33 +01:00
0120c5fa4b
PNS Length Tuning: Recover original arc tracks after tuning
2021-08-09 21:10:33 +01:00
e91218b876
PNS: don't mark holes only if there's also a solid violation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8874
2021-08-08 15:41:39 -04:00
fa82fcb809
Router tool: ensure a internal layer exists when placing a microvia.
...
Fix also a minor compil warning.
Fixes #8931
https://gitlab.com/kicad/code/kicad/issues/8931
2021-08-07 20:29:49 +02:00
c51b1dad72
Generalize infobar MESSAGE_TYPE handling and use for DRC errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8782
2021-08-01 21:51:39 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
e61b1f03b8
PNS: Discard duplicate tracks in FixRoute
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8737
2021-07-13 21:13:40 -04:00
ff2e470a6e
Remove virtual items from clearance calculations
...
Extends 3ea970f8c9https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 16:10:36 -07:00
3ea970f8c9
Don't add virtual items to the display
...
By definition virtual vias should only exist in the backend, not
affecting users
Fixes https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 15:52:41 -07:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
2bd735b631
A little more safety in setting the router idle mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8765
2021-07-09 10:26:12 +01:00
00f1b609c4
PNS: Don't run fanout cleanup when manually forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8724
2021-07-08 19:56:42 -04:00
65c7958293
Coverity issue fixes.
...
Issues #331869 , #331875 , #332203 , #332159 , #332171 , #332180 , and #332648 .
2021-07-08 08:33:08 -04:00
edc2be9018
Update width status when user choice changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-07 21:26:21 -04:00
4207165c26
Fix PNS deleting too many segments
...
Don't exit the loop pre-emptively. Need to update lastLink.
2021-07-07 19:54:19 +01:00
cda26bd57b
SHAPE_LINE_CHAIN::NextShape instead of explicitly calculating indices
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8738
2021-07-07 19:46:47 +01:00
81fa40d659
Code style: Fix missing space
2021-07-05 20:39:42 +01:00
04ff8cde5e
Drag & Fillet Tracks: Ignore mouse up / click events until move / drag
...
Ensures that any click/mouse up events generated after clicking "OK"
in the "Override locks" dialog are ignored.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-07-05 20:29:25 +01:00
e0146f73b9
PNS: Pick up complete lines between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7614
2021-07-03 20:00:54 -04:00
91ea4a0569
PNS: Pick up segments directly between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7601
2021-07-03 19:50:04 -04:00
3f73d8c2b5
SHAPE_LINE_CHAIN::Area() should always be positive
...
The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
2021-07-03 19:37:50 +00:00
c3051ba48a
Refactor SHAPE_LINE_CHAIN to allow two shapes per point
...
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2021-07-03 19:37:50 +00:00
252bf76452
Fix off-by-one in AssembleTuningPath
2021-07-03 14:37:52 -04:00
3c59e452d6
PNS: Set tuned path correctly in skew tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8708
2021-07-03 14:06:30 -04:00
277bf2b719
Add feedback showing current router state to the message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-03 13:21:51 -04:00
400f4ae506
Code cleanup.
2021-07-02 15:54:26 +01:00
780a8a5154
Fix another place disallowing internal microvias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8716
2021-07-02 15:54:26 +01:00
740b028180
pns_line_placer: do not constraint the 45deg of current segment in free angle mode.
...
Fixes #8691
https://gitlab.com/kicad/code/kicad/issues/8691
2021-07-01 16:38:31 +02:00
04b71f5167
Meander minimum spacing can be equal to track width + minimum clearance
...
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
2021-06-29 19:30:01 +01:00
e402563087
Don't recalculate meander spacing. Use constrained value instead.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1776
2021-06-29 19:30:01 +01:00
c159500101
Remove nags and make Sel Layer and add via commands uniform.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8686
2021-06-28 19:17:01 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
a7eb611744
Fix leftover vias in shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8597
2021-06-23 22:13:35 -04:00
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
75ce97e260
Fix the last cause of duplicate segments when completing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-07 20:34:09 -04:00
d4edc70f65
Remove magic numbers where possible
...
Constant scales will be pre-calculated during compilation, so we can
leave the actual formula in place without penalty
2021-06-07 13:56:31 -07:00
49c5130123
PNS: Implement final cleanup pass for redundant colinear segs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-06 21:52:35 -04:00
3c6b98a0d5
PNS: preserve auto-detected track width when changing via sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8046
2021-06-06 20:18:09 -04:00
99710aba48
PNS: use slightly less greedy algo to reset the mouse trail
2021-06-06 19:47:52 -04:00
6cb8154ec0
PNS: Remove code that broke width changes during placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8334
2021-06-06 19:21:52 -04:00
6789dac20b
PNS: Keep most recent good placement around for a rainy day
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8562
2021-06-06 18:56:33 -04:00
c9bc45f7ed
PNS: Limit the maximum walkaround distance factor
...
The constant chosen is somewhat arbitrary and may need
further tuning or a more complex algorithm, but in general
this will prevent churning when solutions can't be found or
a solution can be found but it is unrealistic (going around
the entire board)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 16:03:03 -04:00
d32b9c1c25
Use debug group for line placer debug
2021-06-06 15:44:53 -04:00
f5185f6927
Revert part of the anti-churn change, it causes bad side-effects
...
Further performance tuning could be useful but the part that
remains helps the most when hugging in large designs
2021-06-06 15:44:53 -04:00
8377ebb0e1
Fix msvc warnings
2021-06-06 15:30:31 -04:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
5349f47f95
PNS: Prevent walkaround churn in unsolvable situations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 14:57:52 -04:00
3475d0cebd
PNS: Grab start item based on clearance if no direct hits found
...
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
17da050e69
Improve walkaround results when last point is inside the hull
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8563
2021-06-06 12:55:32 -04:00
be61bf29dd
Use more accurate hull shapes for round solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8561
2021-06-06 09:53:51 -04:00
b610b905fc
Cleanup track.h includes
2021-06-06 09:06:55 -04:00
3b7480c1c1
PNS: Invalidate start/end items after finishing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8555
2021-06-06 08:52:39 -04:00
ab04e24f9a
router: rhMarkObstacles should return a correct error status
...
Long story short: a few days ago I fixed error handling in routeStep(), so it actually started to recognize the wrong error status returned
by rhMarkObstacles() and think that the trace is always incorrect.
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8557
2021-06-04 23:58:56 +02:00
00791e1e37
Fix compile issues on clangd.
2021-06-03 23:41:06 +01:00
1c1ba25ffd
Use char_str instead of c_str in previous commit
2021-06-03 18:13:35 -04:00
daf510344f
Fix build error due to pns changes
2021-06-03 18:05:48 -04:00
63fc7a1908
router: support for drag/walkaround/shove for joints between lines of different widths.
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/1773
2021-06-03 22:44:53 +02:00
af26eab5fb
router: even more debug in SHOVE
2021-06-03 22:44:53 +02:00
a744857267
router: fix array out-of-bound error in HullIntersection()
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8538
2021-06-03 22:44:53 +02:00
3e98c44636
router: LOGGER now stores UUIDs, not pointers to BOARD_ITEMs.
...
Caused occasional crashes when saving the debug event log, as some of the BOARD_ITEMS could have been deleted before SaveLog call.
2021-06-03 22:44:53 +02:00
e5e588ebba
router: temporarily export LINE::Walkaround() debug global variables
2021-06-03 22:44:53 +02:00
70ed5c1ae8
router: introduce concept of 'virtual' vias as a base for shoving/dragging joints of lines of different widths.
2021-06-03 22:44:53 +02:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
247da631f9
Revert "Fix typo and clean up leftover tracks"
...
This reverts commit ed66c0f14d1a102f03c0https://gitlab.com/kicad/code/kicad/-/issues/8526
2021-06-01 11:18:00 -04:00
1a102f03c0
Clean up co-linear tracks after finishing routing
...
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
2021-05-31 17:36:38 -04:00
382dca4e6f
Fix uninitialized member warnings
...
Based on PVS Studio report
2021-05-30 20:01:01 -04:00
67f0bbc6d7
router: fixed crash in HullIntersection() when the path has 0 or 1 points.
...
fixes: 8515
2021-05-31 00:20:32 +02:00
614787caae
router: clear head line geometry if current head routing failed + small improvement to follow-mouse optimization.
...
Also added a lot of verbosity for the pns-log-viewer tool.
Fixes: 8511
2021-05-31 00:18:42 +02:00
dfd80e077c
router: fix another corner case in LINE::Walkaround() (duplicated vertex triggered by feeding a closed loop as the input path)
...
fixes: 1775
2021-05-31 00:17:12 +02:00
0da85ded2f
PNS: Fix diff pair handling of microvias as start items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8514
2021-05-30 15:51:28 -04:00
fcb89b99a3
router: walkaround algo should not copy the previous via position when the current iteration via placement fails.
...
fixes: 7827
2021-05-30 00:35:58 +02:00
af2e163890
router: annotate source locations of WALKAROUND debug items
2021-05-30 00:35:54 +02:00
3eb5a484e1
PNS: Don't clip tuning paths to pads on other layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8504
2021-05-29 15:52:44 -04:00
28f17c3ae6
PNS: Prevent wrong clearance being cached for new diff pairs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8377
2021-05-29 13:31:17 -04:00
85ca85652d
Do not add debug items to view if debug flag isn't enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
bd59da3642
PNS: Local min distance has a minimum points requirement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
ebd957b08e
router: rework router's debugging infrastructure to be more compatibile with the 'qa/pns/pns-log-viewer' tool.
...
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
2021-05-29 00:13:24 +02:00
132eb53a40
router: clean some debug clutter
2021-05-29 00:13:24 +02:00
b3caa3c4d4
router: fix ordering of colliding hulls in NODE::NearestObstacle()
...
Replaced the generic SHAPE_LINE_CHAIN::Intersect() with PNS::HullIntersection() which correctly rejects
'non-penetrating' intersections.
2021-05-29 00:13:24 +02:00
e66bbfd1ec
router: improve the feel of the walkaround algorithm
...
Makes walkaround more 'huggy' - the trace being routed sticks to obstacles
instead of jumping around in uncontrollable way.
2021-05-29 00:13:24 +02:00
8148b5d81f
router: improvements in LINE::Walkaround()
...
- Fix walk failure if the input path starts on the hull boundary
(happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
destination point lies inside the hull of a colliding primitive.
2021-05-29 00:13:24 +02:00
d2ec3fc4ed
router: P&S-specific hull/line interection function that correctly rejects segments/vertices that only touch the hull polygons without penetrating them
2021-05-29 00:13:24 +02:00
8c4361bbc6
router: adapt to new SHAPE_LINE_CHAIN::INTERSECTIONS structure
2021-05-29 00:13:24 +02:00
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
4c69a74505
Force layers visible when routing on them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8432
2021-05-16 11:18:31 +01:00
75f49ba1b6
Add length tuner settings to toolbar context menu
2021-05-12 02:34:52 +00:00
bc6b9b527a
Allow stackup height to be excluded from length calculations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
2021-05-10 22:11:58 -04:00
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
1a45d9474b
Don't show commands that cancel routing when routing is in progress
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8363
2021-05-08 14:55:02 -04:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
e20562b09b
Some cleanup
2021-05-01 10:37:20 -04:00
21fde9b629
enum class PCB_SHAPE_TYPE_T
2021-04-30 22:36:12 -04:00
a433451bd8
router: 'root line' tracking in the SHOVE algorithm. See comments for detailed explanation.
2021-04-27 14:13:16 +02:00
3a8744d054
router: introduce concept of a root lines in the OPTIMIZER.
...
By 'root lines' we mean the oldest traceable ancestor of each track moved by the router
(i.e. after shoving for a while, the root of each shoved line is it's latest non-shoved version).
With this we can teach the OPTIMIZER more tricks, such as the LIMIT_CORNER_COUNT constraint. It ensures
the results of the optimization will not be less cornery than the original line, reducing the feeling
of the optimizer being too intrusive.
2021-04-27 14:13:16 +02:00
76f8861e6e
router: revert Seth's arc adjustment in StartDragging().
...
Fixes picking the last segment instead of the last vertex to drag (when one is requested).
I didn't notice any behaviour change of the dragger wrs to arcs.
2021-04-27 14:13:16 +02:00
e27733587d
Fix 2 minor Coverity warnings.
2021-04-23 19:57:36 +02:00
075bd788eb
Remove unused OBSTACLE_VISITOR::m_extraClearance
2021-04-23 01:53:09 +00:00
ecd9bf696e
Be consistent about using nullptr instead of 0
...
0 can be too easily overloaded into an int, so ensure we use nullptr
when we mean pointers.
2021-04-22 22:20:34 +01:00
cf47d665ea
PNS: Dragged line needs to retain width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8246
2021-04-22 09:04:41 -04:00
9b1890606d
PNS: Do not allow resolved optimal values to go below board minimums
2021-04-21 22:43:26 -04:00
cbd7d698a9
Fix diff pair error message suffix suggestions
...
We accept diff pairs that end in N/P, no underscore required
2021-04-20 21:08:34 -04:00
2535daf661
PNS: Account for via stack height in diff pair length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
2021-04-20 19:31:10 -04:00
dd828bd964
PNS: Bring back original Highlight Collisions behavior
...
From discussion with Tom, Jeff, and Wayne, it appears as though
we all agreed that Highlight Collisions should behave like it
did in 5.1, which is to say, always just highlight collisions,
never prevent them. The Allow DRC Violations checkbox just
controls whether or not you can fix/commit the head line if it
has violations; you are not prevented from moving the head
line to violating positions in any case.
Right now, there does not seem to be much demand for a separate
"Stop at First Obstacle" mode since Walkaround basically does that
but better, but we agreed that if there is demand for it in the
future, it should be implemented as a new router mode rather than
a behavior of Highlight Collisions mode controlled by the Allow
DRC Violations checkbox.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7828
2021-04-18 21:01:07 -04:00
4538d78828
router: fix via shoving regression.
2021-04-19 00:43:30 +02:00
57de83897a
router: VIA SetDrill() and SetPosition() must update the hole shape too.
2021-04-19 00:43:15 +02:00
ec6995697d
PNS: even more free performance
...
If this doesn't work, we have bigger problems
2021-04-18 09:50:06 -04:00
6425ad4118
PNS: Fix propagateDpHeadForces obstacle calculation
...
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want. I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.
Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
2021-04-17 22:37:30 -04:00
5974446523
PNS: Let's make the r-tree work for us
...
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever. This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs. If we really trusted
it, we could set this just to worstClearance. Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
2021-04-17 21:37:11 -04:00
1d7e5a0443
Fix merge error that prevented a previous change from working
2021-04-14 23:30:16 -04:00
268d570941
PNS: keep last valid diff pair trace as current state
...
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
2021-04-14 23:21:10 -04:00
c829dba88e
PNS: Reduce minimum distance to start turn in diff pair placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
2021-04-14 23:21:10 -04:00
cac4d70154
PNS: Respect fix-all in diff pair placer
2021-04-14 23:21:10 -04:00
296a9df530
PNS: Pick up diff pair starting width from continuation track
2021-04-12 23:10:15 -04:00
jean-pierre charras
Electro707
Jon Evans
Jeff Young
Seth Hillbrand
Roberto Fernandez Bautista
Mike Williams
Tomasz Wlostowski
Wayne Stambaugh
luz paz
luz paz
Marek Roszko
Ian McInerney
david-beinder
Jonathan Haas