* Factor out PROPERTIES object from the PCB plugin code and move it into
common so it can be used by both the Pcbnew and Eeschema plugins.
* Add schematic I/O plugin manager for loading and saving schematic and
component library files.
* Add initial attempt at a parser for current schematic file format. This
parser will be infinitely more strict than the current parser which is very
forgiving in what it parses.
* Make minor changes to the base bitmap class to support the new parser.
* Add find root sheet support to sheet object to allow fetching the root
sheet from any sheet in the stack.
Libraries have been 100% case-sensitive for a while now; there is no longer a
need to keep this option around. This will change nothing except for any
stragglers still manually specifying this old option.
* Move add_directory()s in main CMakeList.txt after all find_package()
macros are run so all flags in the main CMakeList.txt are propagated
to the sub-folder CMakeList.txt files.
* Remove commented out include of config.h
* Make the link maps only build on linux as -${TO_LINKER},-cref
-${TO_LINKER},-Map=blah just gives warnings on osx w/ clang
* Make the link maps only build with flag -DKICAD_MAKE_LINK_MAPS is
defined during CMake configuration as they are highly specific.
* Moved the code for setting link maps into the main CMakeList.txt
file to avoid duplication.
* Removed -D__ASSERTMACRO__ from osx as its no longer needed
* Removed a couple of other OSX only things that wouldn't work anyway
* Moved set (BU_CHMOD_BUNDLE_ITEMS) to the main CMakeList.txt as
otherwise it would only work for the KiCad build not the other
applications
* Made KICAD_SCRIPTING_MODULES enable KICAD_SCRIPTING as currently if
you have modules enabled without the scripting base it will on build.
This could be changed to a fatal error saying you need to also enable
scripting but it seems unnecessary.
* Removed duplication of pcbnew.py install code under modules and
scripting since you can't have modules without scripting now
* Enables USE_WX_GRAPHICS_CONTEXT for OSX by default. This shouldn¡¯t be a
major change because it seems to get used on OSX behind the scenes anyway.
As a side effect, this might improve behavior with anti-aliasing because
KiCad shifts drawing by (0.5, 0.5) into the middle of the virtual pixels so
things may be less blurry. It will still build without enabling
USE_WX_GRAPHICS_CONTEXT, but the optimizations obviously won¡¯t be used.
* The optimizations currently only are effective when USE_WX_GRAPHICS_CONTEXT
is enabled and OSX. They might be also good for other platforms using
USE_WX_GRAPHICS_CONTEXT because it aggregates some drawing primitives using
paths wxGraphicsContext provides.
* It adds some #ifdefs for disabling the wxGraphicsContext stuff when
USE_WX_GRAPHICS_CONTEXT isn¡¯t enabled. If you hate #ifdefs, this also
could be dropped but then it will always check if wxGraphicsContext can be
applied.
* Update the developer road map document.
* Update the compiling KiCad from source document to reflect recent build
changes.
* Change Cairo library version to 1.8.8 to fix build issues on CentOS 6.
* Remove download and build Boost from source and all CMake boost source build
dependencies.
* Make FindCairo.cmake use pkg-config when it's available not just all
platforms except windows.
* Add version checking to FindCairo.cmake.
* Change find GML version to 0.9.5.1 which is the current version in Ubuntu
14.04 LTS.
* Update required Cairo version to 1.12.1.
* Fix broken include path in FindGLM.cmake ( credit Cirilo Bernardo ).
* Fix if()/endif() warning in FindGLM.cmake.
* Remove trailing white space in FindGLM.cmake.
* Fix bug introduced in r6363 that inadvertently made OpenMP a required
dependency instead of an optional dependency.
* Remove quiet flag for FindOpenMP to report findings.
* Bump minimum CMake revision to 2.8.12. The CMake position independent code
handling was introduced in CMake 2.8.9 but 2.8.12 is current version in
Ubuntu 14.04 LTS which is a very popular distro.
* CMake provides a simple declarative statement to enable PIC, so no compiler
dependent handling is required.
* There is also no need to tell Boost to build with -fPIC, their build system
is smart enough.
CMake 3.0 defines two new variables:
* CMAKE_CXX_VISIBILITY_PRESET and
* CMAKE_VISIBILITY_INLINES_HIDDEN
to control whether symbols not explicitly tagged for export are implicitly
exported. Because only version 3.3 and later also applies that to static
libraries when in 3.3 mode, compatibility code is added as well.
When the minimum required version is bumped to 3.3, this code becomes
obsolete and a warning is displayed that the compatibility code should be
removed as well.
footprint wizard frame: now shows messages from footprints python scripts. Especially usefull when a parameter is incorrect. Fix also an other issue (IO exception error) with some python scripts when they are usin a print command to output messages (now they use the new message window.
* Use CMake add_custom_target() to run WriteVersionHeader.cmake as a command.
* Modify WriteVersionHeader.cmake to be run as a command instead of a macro.
* Add version header creation as a CMake common library build dependency.
* Add cached CMake variable KICAD_BUILD_VERSION when build version is defined during
configuration.
* Fix CMake macro create_bzr_version_header to always update version.h file whenever a repo change
is found. Running `make rebuild_cache is no longer required.
* Add new CMake function for writing version.h file.
* Always use version.h file for build version string instead of meaningless hard coded date.
* Only use bzr version string when build version is not defined at configuration time for stable release
version strings.
* Minor cleanup of FindBazaar.cmake.
* Remove unnecessary version.h.cmake file.
* Remove global s_NetObjectslist.
* Separate out non-owning version of NETLIST_OBJECTS_LIST into NETLIST_OBJECTS.
* Fix double free pertaining to ~NETLIST_READER().
* Remove all file-io from CvPCB.
* Remove exe launcher cvpcb, retain only cvpcb.kiface, since cvpcb.kiface has no file i/o.
* Add void CVPCB_MAINFRAME::KiwayMailIn( KIWAY_EXPRESS& mail ) and teach it to use old
netlist loading code with a STRING_LINE_READER LINE_READER.
* Fix BEGIN_EVENT_TABLE( CVPCB_MAINFRAME, KIWAY_PLAYER )
The GCC/LLVM specific handling for adding -fvisibility options is later in
this file, so these options would only be added on the second invocation
without clearing the cache.
* Remove redundant definition of KICAD_DATA_PATH since DEFAULT_INSTALL_PATH
was already defined.
* Use DEFAULT_INSTALL_PATH as the substitution for the default environment
variable paths.
* Add option to define DEFAULT_INSTALL_PATH during CMake configuration with
fall back to CMAKE_INSTALL_PREFIX if not not defined.
* Developer note: this change is primarily for package builders where
CMAKE_INSTALL_PATH is the path where the package builder temporarily
installs the build output before creating the package. When building
packages, DEFAULT_INSTALL_PATH should be set to the path where the
package will be installed by default.
* Add support for setting python site package path to PYTHON_SITE_PACKAGE_PATH.
* Move configure_file() so WXPYTHON_VERSION is already initialized before creating
config.h (Duh!).
* Add status message to indicate the version of wxPython found.
* Add test to CMakeLists.txt to verify wxPython is installed when
KICAD_SCRIPTING_WXPYTHON=ON.
* Add test to make sure wxPython version major and minor numbers match
the version of wxWidgets found.
* Add code to set the correct version of wxPython to the python scripting
initialization code.
* Minor code simplification in Pcbnew KIFACE main window creation.
* Using a Web navigator embedded in Kicad can create security issues in Kicad.
* The web kit is not always easily available on Linux.
* There is now a tool in kicad fp lib wizard to list and select the .pretty libs available on Github Kicad repo (When the kicad plugin is selected, this tool can download and make a local copy of these libs)
However, using -D KICAD_USE_WEBKIT=ON when invoking cmake still build the embedded web viewer.
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
* Move all Windows install subfolders from ${CMAKE_INSTALL_PREFIX}/share/ to
${CMAKE_INSTALL_PREFIX}/share/kicad/.
* Remove unused define DEFAULT_FP_LIB_PATH from build configuration.
* Remove Boost target when skipping internal Boost build.
* Update INSTALL.txt to reflect install tree changes.
* Make all files generated by make_lexer() dependencies of thier respective build targets.
* Make building Boost a dependency for all libraries.
* Remove duplicate make_lexer() call for Specctra lexer files.
* Fix creation of single app bundle with respect to scripting support.
* Cleanup scripting search paths for OSX.
* Fix some small CMake bugs from previous OSX build change.
* Optimize bundle file structure to be consistent with Apple specs.
* Add helper script for compiling wxWidgets and wxPython
* Update OSX build instructions.
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
* Add version detection to FindwxWidgets.cmake
* Convert commands and macro names to lower case in FindwxWidgets.cmake.
* Use find_package_handle_standard_args() to handle version comparison.
* Update FindPackageHandleStandardArgs.cmake from CMake 3.0.2 to get the
latest bug fixes.
* Add an option to ignore building every OSX dependency from source and
use find_package() the way it is supposed to work unless the developer
specifically requests building everything from source.
Schematic component properties dialog: add 2 helper buttons to manage the chip name (name of the corresponding part in lib)
- a browse button to chose an other chip name
- a test button, to know if the part exists. If not existing, list the parts found when searching using a case insensitive comparison.
However to be compatible with old versions of Eeschema, when a search in library fails, a case insensitive search is made.
Therefore, this version should be compatible with sch files created by previous Eeschema versions compiled with KICAD_KEEPCASE = OFF
- Create KiCad road map document.
- Add road map to developer's documentation.
- A separate road map build command to CMake so the road map can be built
separately for use in websites.
- Update .bzrignore to ignore road map files generated by Doxygen.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Nick Østergaard
Cirilo Bernardo
Maciej Suminski
Tomasz Wlostowski
Wayne Stambaugh
Simon Wells
Chris Pavlina
José Ignacio Romero
jean-pierre charras
Simon Richter
Cirilo Bernardo
Bernhard Stegmaier
Cirilo Bernardo
Mark Roszko
Mario Luzeiro
Jan Dubiec
Dick Hollenbeck
Garth Corral
Brian Sidebotham
Alexander Golubev
Lorenzo Marcantonio
Marco Serantoni
Blair Bonnett