2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
- Converted the Next/Prev C casts to static casts and removed the type
unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
1. block created from-left-to-right selects only 100%inside selection objects (as it now does)
2.block created from-right-to-left selects all overlapping objects inside selection
From the patch sent by mathieulj (mathieulj), and some fixes and code cleaning.
* Use FPID instead of wxString in MODULE object.
* Use FPID instead of wxString when loading and saving files.
* Use FPID in COMPONENT object.
* Add wxString helper functions and comparison operators to FPID.
* Add fp_lib token to pcb and netlist file formats.
* Add code to load and save FPIDs to pcb file format.
* Fix segfault when deleting invalid footprint library tables in Pcbnew
in non footprint library table build.
* Fix bug when counting the number of mod files in
EDA_APP::SetFootprintLibTablePath();
This is limited to round tripping the lines of commented text in the
loading and saving to disk through PCBIO::Format() and PCBIO::Parse().
No editing of the comments is given.
* All items shapes are converted to polygons.
* Polygons are merged layer by layer (for calculation time reasons,zones are not merged)
* for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas).
* the look is better, mainly when displaying the copper thickness
* solder and paste layers are now shown in 3D viewer.
* the code was seriously cleaned (but still needs to be enhanced).
* Note this is a work in progress which needs refinements.
* Create separate NETLIST object to hold contents of netlist files.
* Read entire netlist and footprint link files before making applying
changes to board.
* Add BOARD::ReplaceNetlist() function to eliminate the calls between the
NETLIST_READER, PCB_EDIT_FRAME, and BOARD objects.
* Change placement of new components below the center of the current board
or in the center of the page if the BOARD is empty.
* Add dry run option to netlist dialog to print changes to message control
without making changes.
* Add button to netlist dialog to allow saving contents of message control
to a file.
* Eliminate the need to compile netlist_reader_*.cpp in both CvPcb and Pcbnew.
* Add netlist_reader_*.cpp to the pcbcommon library.
* Remove redundant load component link file code from CvPcb.
* Modify CvPcb new to work with the new NETLIST_READER object.
* Add compare() function and < and == operators to FPID object.
* Add REPORTER class to hide an underlying string writing implementation for
use in low level objects. Thank you Dick for the idea.
* Lots of minor coding policy, Doxygen comment, and missing license fixes.
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Encapsulate most of the MODULE class.
* Start encapsulating the DIMENSION class.
* Lay some groundwork for EDA_TEXT encapsulation.
* Move cleverly hidden MODULE functions into class_module.cpp.
* Use std::swap to exchange TEXTE_PCB values for undo/redo.
* Remove unused members from MODULE class.
* The usual coding policy and documentation fixes.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
and therefore tracks are now dragged when a end point is inside a pad, not necessary on the pad position.
However, drag functions still need more cleanup.
* Add s-expression file parser object and keyword files.
* Fix minor issues with s-expression file formatting.
* Fix a minor bug the zone container fill state parsing in the legacy plugin.
* Move EDA_TEXT visibility definition to eda_text.h.
* Add minor BOARD_ITEM object improvements to support s-expression file
parser.
fix a compil warning.
CvPcb: fix regressions :
Shows now a void field instead of the dummy footprint name $nonane (whenthere is no footprint selected in netlist).
The active footprint selection changes only if a new component is selected from the component file,
and does not change just when the next component is automatically selected, after a footprint selection.
Speed up delete association and auto associe.
* Move board item object Format() functions into PCB_IO object.
* Change file format to use layer names instead of numbers.
* Change file extension to kicad_pcb.
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
Maciej Suminski
Dick Hollenbeck
Tomasz Wlostowski
Lorenzo Marcantonio
jean-pierre charras
Wayne Stambaugh
Miguel Angel Ajo
Marco Mattila