- When the Kicad manager is iconized, all other child frames are iconized (normal wxWidgets behavior)
- For viewer frames in modal mode, there is a more annoying issue: they have the wxFLOAT_ON_PARENT frame style on unix, and wxSTAY_ON_TOP on Windows.
wxFLOAT_ON_PARENT frame style is incorrect (although on most WM it works) because the parent frame (Kicad manager Frame) is not the caller. It is usually a main editor frame.
It does not work on Windows (wx STAY_ON_TOP is used).
* Now each editor frame has a null parent.
Therefore iconizing the Kicad manager frame does not iconize other frames.
* Viewer frames have null parent in normal mode and the caller parent in modal mode (therefore wxFLOAT_ON_PARENT frame style is always and correctly used)
* References to opened/closed main frames are no more managed by the (complicated) kicad code. Instead of, a non critical and more easy to understand code just uses FindWindowByName to know if a main window exists or not.
These changes do not fix all issues about Kicad frames brought to the foreground or the background, but it fixes a few issues, and AFAIK do not add other issues.
* fix minor coding style issues.
* remove unused member in modview_frame.
* use different frame names in ctor of modview_frame and viewlib_frame depending on the fact they are built modal or not modal (allowing identifications when calling wxFindWindowByName)
* change questionnable code in class_libentry.cpp.
* remove unused code in class_treeproject_item.cpp
Fix minor 3D viewer issues (includling change number of segments and its optimization to draw pad holes.)
Fix Bug #1439132 (track and via list on toolbar not always refresh after loading a board).
Remove useless tool in Modedit.
Very minor fixes: remove duplicate #define in vrml_v2_modelparser.cpp, and "undo" a very minor change I made in class_board.cpp when I tried to fix a Pcbnew crash.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
*) Implement a framework for "Data Load On Demand".
*) Implement FP_LIB_TABLE* PROJECT::PcbFootprintLibs(), which is the first
prototype.
This allows the project specific footprint tables to be part of the Module Editor
when invoked from Eeschema.
*) Eeschema can now show the footprint editor.
*) Eeschema can now invoke the footprint picker from the library part field editor.
*) KIWAY_PLAYER::ShowModal() takes aResultantFocusWindow that tells what window
to give the focus to. Required since frames are often near the top of the
hierarchy and they are invoked by a peer, not a parent.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
(for instance, when a footprint from the currently edited board is loaded in the footprint editor, and when the board is cleared or reloaded)
In footprint editor, the net names are no more shown od modifiable (becuase the footprint editor does not know anything about net names.
This change should allow the changes planned in pcbnew.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
To use multiple working threads. This entailed adding KiCad typedefs:
*) Add typedefs for MUTEX and MUTLOCK which mask the actual choices for the project.
*) Add FOOTPRINT_LIST::DisplayErrors( wxWindow* ) which is a single strategy for
showing aggregated load errors. Although what's there is only scaffolding
and needs a volunteer who knows HTML pretty well.
*) Ensure all callers of ReadFootprintFiles() use the new DisplayErrors() function.
*) Push utf8.cpp and utf8.h into common library for open use.
pass into an HTML rendering panel and otherwise look goofey.
*) Implement BOARD::Move() can call it from EAGLE_PLUGIN::Load().
*) When USE_FP_LIB_TABLE, tolerate blank nicknames in FPIDs coming from eeschema.
See the switch for this in pcbnew/netlist.cpp as ALLOW_PARTIAL_FPID.
*) Add an assert and a try catch block to figure out that View does not
like some eagle pcb board. bitset::set() is getting a -1 value and firing
an exception.
*) Set environment variable KISYSMOD before loading FP_LIB_TABLE so that
FP_LIB_TABLE::ROW::SetFullURI() can do substitution up front.
*) De-emphasize the lib path in some of the footprint frames but keep it
so the footprint editor can export a current library to another.
You can even export a GITHUB library to a pretty library for local
installation.
*) Start the PLUGIN options editor.
*) Enhance cursor positioning in DIALOG_FP_LIB_TABLE.
Dick Hollenbeck
Michael Steinberg
jean-pierre charras
Wayne Stambaugh
Maciej Suminski
Tomasz Włostowski
Marco Ciampa
Mark Roszko