d6f1d5da76
Start-routing list needs to be a white list, not a black list.
...
We check the collisions later in the same routine, which is where all
the black-listed objects come in.
Fixes https://gitlab.com/kicad/code/kicad/issues/12595
2022-10-07 18:18:02 +01:00
bc58480e24
Missed some other uses of m_startItem in previous commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 14:01:46 +01:00
cbb997a3b5
Use GetCurrentNets(), not m_startItem for message panel updates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 10:34:11 +01:00
40ad5b6de3
Broaden reset-sizes-after-layer-switch algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-06 15:50:22 +01:00
d8a3ba7917
Update router sizes when switching layers.
...
We may have layer-specific rules involved. Note that at some point
we also need to do something similar on every "fix route" step to
handle area-specific rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-05 16:45:42 +01:00
b4f3390626
Drill size is absolute
...
Use hole plating size for visibility only, not zone filling, routing or
DRC
2022-10-04 09:52:40 -07:00
7be05e9eb1
Make sure we have nets before grabbing the first.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12554
2022-10-01 13:50:26 +01:00
ba6afafc86
Router Tool: get rid of getNearestRatnestAnchor
...
Unused now that the PNS Router handles the actions that needed it.
2022-09-28 13:29:52 +00:00
6252840abd
PNS/Router Tool: Refactor Continue From End
2022-09-28 13:29:52 +00:00
1be0deb58f
PNS/Router Tool: Refactor Finish Route
2022-09-28 13:29:52 +00:00
b1f2273bc6
PNS: Add CurrentStart() to placers.
2022-09-28 13:29:52 +00:00
1683e552f7
Add/fix some variable initializations
2022-09-25 00:48:38 +01:00
fdb97a46c1
Don't copy items in for loops when not needed
2022-09-24 03:46:06 +01:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
1a023f5dd0
PCB Editor: (Auto)Route Selected (From Other End)
...
3x Selection-Based Routing Tools. Takes a selection of routable objects
and routes them one at a time individually, with an attempted finish, or
from the other end, depending on the action given.
2022-09-13 15:06:36 +00:00
dc20e24c4a
Route Other End: Perform Steps in one Undo Commit
2022-09-13 15:06:36 +00:00
82f8cd72a3
PNS Router IFACE: Add board commit mode control
2022-09-13 15:06:36 +00:00
cc4e34ef49
Don't sync the world twice in inline router tools.
...
Activate() already clears and syncs the world via PNS::TOOL_BASE::Reset,
so there's no need to sync in InlineDrag and InlineBreakTrack.
2022-09-10 20:49:30 +00:00
fa3e9efdce
PCB Router: return to original active layer after routing
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12313
2022-09-06 10:51:46 -04:00
68f71e4a62
PCB Router: Pressing V again can untoggle Via
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12315
2022-09-06 10:51:46 -04:00
7c83c78afe
Allow free pad usage in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11730
2022-09-06 13:59:52 +01:00
156755e9db
Allow processing of non-handled events in length tuner tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-05 10:57:07 +01:00
895a8a8dbc
Work around focus issues for status popups.
...
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-04 21:08:01 +01:00
9405817a4d
Improve contrast of status popup text on Mac.
...
Also works around an issue where GetBackgroundColor() returns black
(with a 40% alpha) on Mac.
2022-09-04 21:08:01 +01:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
c15a13963b
Fix Build error: AddLine doesn't exist anymore
2022-09-02 11:17:28 +02:00
22f96bfd11
Re-route m_last_head after routing fails
...
This should ensure the shove state gets reverted
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2022-09-02 09:41:15 +02:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
91fbb5c957
Don't prevent immediate actions while router active
...
Immediate actions that can take place are useful. We should only be
preventing immediate actions while actively routing or dragging
Fixes https://gitlab.com/kicad/code/kicad/issues/12311
2022-08-30 10:31:29 -07:00
2ff6a6aee1
Implement and enable option to not shove vias during push & shove routing
2022-08-29 17:32:39 +00:00
7baa56528a
Make sure via-gap-same-as-trace-gap gets turned off for board settings.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12236
2022-08-26 13:22:57 +01:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
f06e28b7a7
PCB: Finish Route, Route From End
...
Adds restart routing from other ratsnest' end and automatically finish
routing.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5051
2022-08-17 03:15:46 +00:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
1ce8fc1614
Ensure arcs are handled in topology
...
Use the connection-independent `Anchor()` function to get connection
points for either arcs or segments in topology. This allows the
ratsnest to be correctly drawn between nets with arcs
Fixes https://gitlab.com/kicad/code/kicad/issues/12205
2022-08-12 20:07:28 -07:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
76b9e25143
Cleanup unused code
2022-08-02 08:33:59 -07:00
e0b3f6c258
PNS: Handle via-in-pad distances when tuning
...
Tuning with a via in pad, the via isn't a part of the full line. But we
still need to account for the line length distance of the
starting/ending vias. To do this, we simply measure the height from
the ending track to the ending pad and starting track to starting pad
(cherry picked from commit 82e8e38054
2022-08-01 20:25:17 -07:00
17fdb7c6a8
Prevent drag index from exceeding full line count
...
Simplification removes segments, so we might lose our valid index.
Ideally, we would simplify during the assembly or pass the input index
to the simplify routine to maintain the proper value.
Fixes https://gitlab.com/kicad/code/kicad/issues/12137
(cherry picked from commit 6c617d84ca
2022-08-01 08:58:28 -07:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
e558893851
router: use actual snap point position for routability checks of a segment instead of the segment endpoint(s).
...
Explanation:
- place a long segment A with something violating the rules close to its endpoint
- try to start routing in the 2/3 of the length of A (on the obstacle side)
- bummer - the router picks the nearest endpoint of A for the collision check (even though we don't care about this collision since we want to route far away from it)
2022-07-21 16:30:28 +02:00
a9a5136c1c
Always allow blind/buried/micro vias
...
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
2022-07-12 19:47:31 -07:00
3d1d432c5e
PCB Editor: re-add missing color to dynamic ratsnest
2022-07-12 19:36:51 -04:00
664bf1382d
PNS: Fix IsLineCorner logic
...
Handle segment width test in the case of locked segs
Fix logic failure where vias on path cause crash
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11990
(cherry picked from commit 2512375988
2022-07-12 02:49:24 +00:00
e122dc38bd
Add context menu item for clearing net highlighting.
...
In selection tools, drawing tools, router tool, line_wire_bus tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/11920
2022-07-10 17:15:20 -06:00
b8479bf6f1
Handle severity ignore rules in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11609
2022-07-09 11:24:47 -06:00
0cb5abd7f7
Fix highlight on route again
...
Added a clarifying comment that will hopefully keep the required code
block in place
2022-07-08 20:14:46 -07:00
3111b7679d
router: bring back the snap-to-hull behaviour in Mark Obstacles mode
2022-07-03 23:59:27 +02:00
f48ed79039
Rely on DRC rules when items might overlap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-29 13:43:44 -06:00
833dc70bff
Add edge-exclusions to router (for castellated pads).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-27 15:16:37 -06:00
f5fe1d5462
router: another attempt at improving 'kink' robustness of the hull generator
2022-06-09 20:51:21 +02:00
56df462474
router: fix SegmentHull() corner case when it 'chamfers' more than the clearance permits (corner case for 0-length segments, which we use
...
for representing holes)
2022-06-09 00:33:08 +02:00
990281a897
router: use either copper or hole clearance, whichever is larger, when checking track -> hole collisions
2022-06-09 00:31:47 +02:00
4192c0a709
router: move IsFlashedOnLayer to the IFACE_BASE class so that it can be used in the debugger tool
2022-06-09 00:30:57 +02:00
bcfe12ce47
router: improvements in robustness of SegmentHull()
...
- ensure the 'chamfer' radius and clearance is rounded before computing the actual hull vertices
- for small, non-45 degree line segments (present in many boards), generate a slightly larger but still axis-aligned 45 degree hull instead of following exactly the segment direction
2022-06-08 14:28:31 +02:00
e90ab055b9
router: remove unused LINE::Is45Degree()
2022-06-08 14:28:31 +02:00
30fb298ed3
PNS: Re-enable hole clearance for non-flashed pads/vias
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11098
2022-06-07 19:49:38 -04:00
23596812b6
PNS: Implement HoleHull for VIA
2022-06-07 19:49:38 -04:00
9f38fa43cd
Fix some minor compil and Coverity warnings.
2022-06-05 11:44:49 +02:00
3747369aaa
PNS: Remove offsets from hull generation
...
This is likely an old workaround to numerical precision issues
in the DRC system that no longer exist. Removing this is necessary
for "exact" hull generation to produce walkaround results that
look nice (paths falling exactly on the grid lines)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 5d4e2aa595
2022-06-04 00:04:03 -04:00
9a2950cca1
PNS: Use exact hulls for walkaround path generation
...
When we generate hulls, by default we subtract the clearance epsilon
to prevent false collisions in the router that wouldn't be flagged
by DRC. However, we need to use the actual hull with no epsilon
when generating hulls for pathfinding in the walkaround system.
Without this change, it is possible for the walkaround to generate
a valid-seeming path that results in a DRC violation, for example
when dragging a drag against a board edge.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10536
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11365
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 2a91ba35c1
2022-06-04 00:04:03 -04:00
c8b93c39b6
router: remove some old cruft from the WALKAROUND class
2022-06-03 23:28:41 +02:00
0bd7f603a3
router: consider mouse drag event a valid route start/end event
...
L-clicks during routing operation while the mouse is moving (even slightly) were ignored, which was annoying to some users (myself included). Now the router
always fixes the track upon mouse click.
2022-06-03 23:28:41 +02:00
eaee610fd9
router: save project settings together with the debug log
2022-06-03 23:28:41 +02:00
f73acbb206
router: derive VIA class from LINKED_ITEM interface
2022-06-03 23:28:41 +02:00
cab08f859a
router: cluster extraction should only consider objects that are touching (instead of checking clearance)
2022-06-03 23:28:41 +02:00
297c60923e
router: return routing status from ROUTER::Move()
2022-06-03 23:28:41 +02:00
54f4f765b9
router: NODE|ITEM::QueryColliding() now can override clearance
...
Needed for clustering algorithm (to be committed later... ;-)
2022-06-03 23:28:41 +02:00
aca9cce5d5
router: more verbose debug messages for the debugger tool
2022-06-03 23:28:41 +02:00
2a0accd184
router: shove algorithm now considers cases where a small via sits 'inside' a fanout of wide (width > via diameter) segments.
...
The shove algorithm can't move the loose track ends. It always needs a via. In case of wide segments stitched with
a small via, the collision search finds only colliding segments and does not consider the via. This leads to frequent shove falilures
or 'choppy' behaviour when the head line only slightly overlaps with an end of a thick trace. This patch attempts at improving this behaviour
by considering the 'tiny via in wide segment' case explicitly.
2022-06-03 23:28:41 +02:00
08647bf035
router: temporarily disable via hole clearance check in the shove algorithm.
...
- needs refinements and additional checks for corner cases.
- disabled also to facilitate debugging of other shove bugs
2022-06-03 23:28:40 +02:00
8cb65a8a13
router: default values for LOGGER::Log()
2022-06-03 23:28:40 +02:00
752ba2ed76
router: log via toggle events
2022-06-03 23:28:40 +02:00
a4ad47cd08
router: use SHAPEs and PNS::ITEMs only in the ROUTER_PREVIEW_ITEM
2022-06-03 23:28:40 +02:00
b08280d00c
router: enable Hole Clearance rule only in Mark Obstacles mode
...
(it will be brought back to Walk/Shove modes as soon as all the underlying issues are fixed)
2022-06-03 23:28:40 +02:00
40593930d0
PNS: Fix off-by-one in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10919
(cherry picked from commit 8d8f96b094
2022-06-01 21:13:05 +00:00
6fd14ac945
[PNS] Fix invalid assumption in IsLineCorner
...
(cherry picked from commit a4aa447b95
2022-05-31 20:24:54 -04:00
9470bd15a1
PNS: Fix skew calculation with pad-to-die specified
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11710
(cherry picked from commit 53dbd3bb02
2022-05-31 20:24:54 -04:00
f2fc78f380
Don't copy modifiers to prime events.
...
The modifiers go with the hotkey, not with the action.
Fixes https://gitlab.com/kicad/code/kicad/issues/11618
2022-05-16 13:51:40 +01:00
a54bbfe12b
Honour prime-event-location when starting router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11239
2022-03-29 13:44:40 +01:00
7b2d9dfc0c
Fix some Coverity uninitialized scalar variable issues.
2022-03-24 13:17:07 -04:00
4225f92573
Slight improvements to via drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
ec5b7a57ec
Consistency in via dimensions terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11024
2022-03-03 22:40:18 +00:00
adace996f4
qa/pns: refactored the P&S debug tool:
...
- factored out 'business' code from the UI code
- moved to the new DEBUG_DECORATOR interface
- UI-less log file and log player classes as a step towards P&S unit tests
2022-03-03 01:02:00 +01:00
45f7cf9571
router: rework the DEBUG_DECORATOR a bit:
...
- support for dumping complete PNS::ITEMs and generic SHAPEs
- support for log nesting levels
- wxT-ized strings
- more verbose output where needed
2022-03-03 01:02:00 +01:00
4d6c2e4868
Update end item before moving on track/via change
...
The move even dereferences m_enditem for logging and perhaps other
actions. We need to ensure that the end item has not been invalidated
before taking this action
Fixes https://gitlab.com/kicad/code/kicad/issues/10732
(cherry picked from commit 901c330478
2022-03-02 09:23:15 -08:00
639fdb915a
Implement real layer test for visibility.
2022-02-24 21:32:43 +00:00
f076d07e9e
Fix asserts.
2022-02-24 18:16:45 +00:00
f18aae679c
Use router to update message panel when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10068
2022-02-20 16:50:30 +00:00
a2ca8cf413
Improve SNR.
2022-02-12 18:38:11 +00:00
8dcc933fc3
Don't use bounding box cache during insideArea.
...
For starters we can't rely on it having been updated, but we also
cache the entire result so there's no huge cost-savings anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-02-12 18:38:11 +00:00
0a5ddb8d40
Add some vector reservations
2022-02-05 21:12:29 -05:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
92dc06ac9d
Don't convert KIID on the fly
...
Converting to string on save prevent unneeded ops
(cherry picked from commit 901685f01b
2022-02-03 10:35:31 -08:00
803675195d
Be more diligent in preventing drag line errors
...
They can happen even when there are no collisions, so we need to reset
the 'ok' flag before using the line again.
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 833ce19221
2022-01-31 16:13:53 -08:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
ad84b62b63
Prevent multiple single-point line solutions
...
Suggested by @rivimey, we test the case where both lines return singular
point lines and prevent them leaking into our drag solution
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 38a4894d92
2022-01-29 07:07:29 -08:00
7277fd6218
Don't allow degenerate lines in dragger
...
If walkaround returns an invalid line, don't consider it for a track
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 8ae304dcca
2022-01-28 15:19:06 -08:00
441e5fd486
router: don't reject non-45 degree lines in the LINE_PLACER
2022-01-22 00:28:11 +01:00
ce28525172
router: include arc approximation tollerance in arc hull clearance calculation
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/10470
2022-01-22 00:28:11 +01:00
14006495d5
Angle cleanup.
2022-01-20 22:35:41 +00:00
e61144d45a
Finish with EDA_ANGLE.
2022-01-16 21:15:40 +00:00
e84c574830
Some more EDA_ANGLE cleanup.
2022-01-16 19:16:18 +00:00
1539fa5af2
Move SHAPE_ARC to EDA_ANGLE.
2022-01-16 01:19:45 +00:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
eac1936303
PNS: Do not clear layer pairs when importing new sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10225
(cherry picked from commit 20bbf9b179
2022-01-13 20:38:08 -05:00
3011ae1d51
PNS: Do not allow smart pads when in 90-degree mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10386
(cherry picked from commit cf4d46b24d
2022-01-13 20:38:01 -05:00
79fe0bf456
router: use VIA::PushoutForce() for via push force calculation in the shove algorithm
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10317
2022-01-13 00:43:27 +01:00
4d0a317e3d
router: fix via force propagation for vias where hole clearance > copper clearance
2022-01-13 00:42:50 +01:00
eb58d7e44c
Text glyph caches and bug fixes.
...
1) Unify metrics between stroke and outline fonts
2) Unify handling of rotation and mirroring
3) Bug fixes in collision handling
4) Use of VECTOR2I (instead of VECTOR2D) for world-coordinates
5) Generate outline font overbar with rounded ends and fix rotation
bugs
6) Generate wxEVT_CHOICE events from FONT_CHOICE::SetFontSelection
7) Change text-item PNS SOLIDs to use compound shapes
2022-01-08 16:47:45 +00:00
72340fcee2
Implement router and DRC collisions for outline fonts.
2022-01-08 16:47:45 +00:00
60c0891c5f
Exit router and invoke edit tool when attempting to drag an arc track
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10208
(cherry picked from commit 45182febaf
2022-01-02 16:10:50 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
f744ddd11d
Fix copy-paste error in PNS mouse trail tracer
...
And also fix indentation of control flow.
2021-12-31 00:04:11 +00:00
0e9cfd0af2
Add missing initialization values to variables
...
Flagged by Coverity.
2021-12-30 23:42:06 +00:00
5e4a704155
Remove some more duplicated preferences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10112
2021-12-26 13:37:28 +00:00
2538ad16aa
Handle router collisions with filled shapes.
2021-12-24 21:10:28 +00:00
ed79f6e511
Clean up some TODOs.
2021-12-24 21:10:28 +00:00
9ee28ea8f5
Flatten out some more preferences.
2021-12-24 15:43:20 +00:00
57af990066
router: fix layer switch issue when starting a track on via without fixed segments
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9915
2021-12-16 00:55:17 +01:00
956ac871c3
PCB Editor: changes to track width overrides starting track width
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
2021-12-15 23:32:48 +00:00
97c2627de6
router: added missing case items (fixes regression in component dragging)
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10010
2021-12-15 23:18:55 +01:00
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
2ae3a83b54
router: fix use-after-free crash in single trace shove routing when m_endItem's owning NODE is erased by the springback algorithm.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9994
2021-12-15 01:33:05 +01:00
b291d6c810
Fix success conditions in DP placer
...
The placer can sometimes generate segments that are not quite parallel.
Use a different tolerance for ApproxParallel to account for this.
Also set a minimum score for placement judging so that any placement
that doesn't violate DRC can be placed.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9948
2021-12-12 13:05:38 -05:00
6d0d4e0db9
Pcbnew, router tool: ensure switching layer by + or - works when starting routing.
...
Fixes #9936
https://gitlab.com/kicad/code/kicad/issues/9936
2021-12-11 09:54:03 +01:00
77fbb495f2
Highlight net during inline drag
...
Keep consistent UX between inline drag and drag started in the router
tool itself by highlighting the net being dragged
Fixes https://gitlab.com/kicad/code/kicad/issues/9919
2021-12-09 09:28:43 -08:00
95087c6de5
Fix clearance outlines for router head.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9885
2021-12-06 15:51:53 +00:00
5ba215c8ea
Use actual width when previewing PNS lines
2021-12-05 13:41:39 -05:00
7de9e48b57
PNS: Fix tuning calculations through locked segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9727
2021-12-05 13:35:28 -05:00
5cb2641142
Fix nullptr dereference in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9844
2021-12-02 13:20:44 +00:00
a596a1f2e2
ROUTER_TOOL needs to handle pads not handled by router itself.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9839
2021-12-01 22:25:02 +00:00
3c0b10b022
Don't use approximated shapes for router hulls.
...
We only do 45-degree routing anyway so we might as well build an
octagonal-based hull from the get-go.
Fixes https://gitlab.com/kicad/code/kicad/issues/7672
Fixes https://gitlab.com/kicad/code/kicad/issues/9544
Fixes https://gitlab.com/kicad/code/kicad/issues/9833
2021-12-01 19:44:30 +00:00
09ed60feb3
Don't make inferences about object type based on shape.
2021-12-01 19:44:30 +00:00
63560ecd7b
Remove RM_Smart state from router tool
...
It was never fully implemented and there was no way to switch into this
route mode.
2021-12-01 09:52:37 +00:00
a746d31038
PNS: Fix loop removal outside shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9680
2021-11-27 15:21:47 -05:00
8a0f8c329f
PNS: Fix DP gateway generation when pad distance < gap
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9306
2021-11-27 14:03:19 -05:00
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
6652e5acf4
Draw pad holes when dragging.
...
Most of the time they're under the pad, but the provide needed
info when the hole is larger than the pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:09 +00:00
9547c72e73
Teach router about different keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:04 +00:00
99ec2b1801
Don't hide original object when highlight is only part of it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9772
2021-11-25 23:42:13 +00:00
da458535c4
PNS: Avoid flickering clearances on new items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:38:04 -05:00
63718323bc
PNS: Holes need to be moved with solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:31:18 -05:00
b4342d813b
Fix SHAPE_LINE_CHAIN::Slice when end is an arc followed by a point
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9770
2021-11-25 10:05:33 -05:00
ade8fe4333
When dragging footprints pads with holes also need to be taken along.
...
Otherwise (aside from not colliding with their dragged location) we
won't update their locations and then if they happen to be the first
pad in the footprint we'll try to update the footprint's location post-
drag with the pad offset (which will be {0,0}.
This is easily reproducible with the test document in the bug in the
"fixes" statement.
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
f9e1429c60
Naming conventions.
2021-11-25 14:54:12 +00:00
5985a21b74
Offset internal items by drag amount.
...
Some tools move only preview items while keeping the real items
hidden. Those tools must use this new offset parameter.
Other tools move the real items. Those tools can ignore this
parameter (which will default to {0,0}).
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
ba6ae4fa9b
Kicad has many plugins. This one is for the pcb.
2021-11-25 12:56:46 +00:00
1c3e1df3ca
Not all holes are round.
...
We currently only need this to work for vias as we're a long way
from being able to support it for pads, so just check the hole
shape.
Fixes https://gitlab.com/kicad/code/kicad/issues/9735
2021-11-23 14:36:05 +00:00
e56e61ffb5
router: fix typo in the DP tuning fix patch
2021-11-23 00:21:38 +01:00
89228e1ebe
router: increase parallelity detection threshold for AssembleDiffPair()
...
Partially fixes the misrecognized diff pairs issue.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8567
2021-11-22 01:35:12 +01:00
e60386f028
router: disable 'limit corner count' optimization for via dragging
...
It seems to be completely preventing optimization instead of preventing over-optimization in case the head is a dragged via.
To be investigated in more details in V7.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
ccf9a72078
router: fix ghost dots issue in router preview items
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
bbafce6ab3
PNS: Don't clip the line in the middle of an arc - just start again
...
In shove mode, returning an empty line results in keeping the current
head, which should be okay for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2021-11-21 19:53:03 +00:00
4e0ad07eb0
PNS::Shove Add margin when generating hulls for arc segments
...
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
There is still a case where if the shover does not find a solution,
we try clipping the arc and it still collides.
2021-11-21 17:13:21 +00:00
b1878fcc54
ClipVertexRange: fix fallout of NextShape API change
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9711
2021-11-21 11:03:22 -05:00
302c5ab537
Fix an issue created by commit 9e3362d1.
...
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
c40e921cb3
router: remeber to make a shove lockpoint when placing a lone via
...
Note to self: works around a possible bug in CommitPlacement()/RewindToLastLockedNode()
fixes: https://gitlab.com/kicad/code/kicad/-/issues/9695
2021-11-21 00:18:20 +01:00
9e3362d14c
Snap mouse point before picking startItem.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9700
2021-11-20 13:44:16 +00:00
1f4858c314
Show holes in router preview items for vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9658
2021-11-20 12:21:24 +00:00
ed478f5ec0
Revert to ERROR_INSIDE for complex pad shape hulls in PNS
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9544
2021-11-15 19:15:05 -05:00
8ec3ce99ae
PNS: Update shover when autocompleting on item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9598
2021-11-10 18:17:56 -05:00
59807d8d26
A better solution to discarding pending shove operations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9553
2021-11-09 00:00:54 -05:00
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
153594b9ea
PNS: Actually implement the AbortRouting API
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9425
2021-10-31 16:06:57 -04:00
08700e3522
Router: show corner style in message panel
2021-10-30 09:08:52 -04:00
e6c3027531
Action string typo fixes
2021-10-30 08:47:36 -04:00
63d4d84aaa
pcbnew, router: fix a crash and some other issues related to microvias and blind/buried vias
...
- fix crash when trying to create a microvia from a internal layer (boards with > 4 layers)
- fix a bug that allowed to create a non through hole via on only one layer
- fix a bug that allowed to create a microvia on non adjacent layer pair
- when placing a via and selecting the target layer from dialog, show only allowed layers.
Fixes #9477
https://gitlab.com/kicad/code/kicad/issues/9477
2021-10-29 17:54:04 +02:00
4afb59fda0
Added feature to switch between router modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9414
2021-10-28 22:46:05 +00:00
4a9b3d9673
PNS: clear leftover vias from previous trace in DP placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9283
2021-10-27 21:58:42 -04:00
36d11f745e
Update ratsnest while dragging footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-10-25 21:45:30 +01:00
328d3d0d77
PNS: Fix rule resolution when starting from PTH
...
Have to use the routing start layer, not the first
layer of the PTH, to get the appropriate sizes
2021-10-23 22:46:31 -04:00
3b18dce911
Remove vestigal setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9444
2021-10-23 22:12:25 -04:00
2a6c73b8df
Check for hole before highlighting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9423
2021-10-19 11:25:00 -07:00
e9205a0740
Fix mistaken comparison in highlighting
...
Need to compare between elements colliding
Fixes https://gitlab.com/kicad/code/kicad/issues/9413
2021-10-18 13:38:27 -07:00
faba2b06c2
Lock track width after placing segment
...
We don't want to allow the full track width to change after placing a
segment when we are in follow-segment mode. This would require either
ripping up and re-solving the existing track or allowing potential DRC
errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/9395
2021-10-14 09:21:14 -07:00
35e90d0cf4
Allow changing router mode while routing
...
Keeps shove active even when not using to allow switching modes during
routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/9342
2021-10-12 09:55:34 -07:00
7f1247a23c
Update track width when changed
...
Tracks starting from pads should change in response to the track width
changing despite having the "follow existing track" width selected.
2021-10-12 09:55:34 -07:00
4d6b1a4e36
pns_diff_pair_placer: fix empty message when a signal of a pair is not found.
...
Fixes #9334
https://gitlab.com/kicad/code/kicad/issues/9334
2021-10-08 14:57:01 +02:00
a8ec3b58ed
Use via's real drill value for hole size
...
If the via drill is "Default" be sure to get the default value rather
than the placeholder
Fixes https://gitlab.com/kicad/code/kicad/issues/9313
2021-10-06 11:00:58 -07:00
2e120528c8
Length Tuner: Allow single meander when it fits on its own
2021-09-28 18:50:31 +01:00
71156368c9
Length Tuner: Allow controlling the side of the meander using the cursor
...
Also fixes an issue that did not allow single meanders to be placed
2021-09-28 18:50:31 +01:00
726f9ebe3d
Pcbnew: Router tool should not block drag selection when idle
...
The other drawing tools allow drag selection while idle. Also, it makes
it more obvious to the user when accidentally drag selecting while
routing than just doing nothing on a drag with the routing tool selected
and idle.
2021-09-27 16:05:13 +00:00
5f3c67bd2b
Fill in some missing GetMsgPanelItems and make some others consistent.
...
Also expunges a std::vector<MSG_PANEL_ITEM> cover type.
2021-09-27 00:23:40 +01:00
a2ad204f4b
Fix off-by-one in AssembleTuningPath
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9003
2021-09-22 20:25:22 -04:00
be799b49a8
Fix equality in dp matching
...
A single count is found when dp ends with matching char. .Right(0) will
return an empty wxString() which is still valid
Fixes https://gitlab.com/kicad/code/kicad/issues/9206
2021-09-21 19:47:15 -07:00
cf53b053a1
Improve handling of dragging around locked segments
...
Locked segments now are not modified if they weren't the start item.
If a locked segment is the start item, it is automatically unlocked.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9145
2021-09-21 22:38:53 -04:00
22a29a42cf
Generalize net DP matching
...
The requirement of 1-2 numbers following P/N or +/- was arbitrary and
not needed. We also add the _ to allowable suffixes to permit DP
matching of auto-renamed nets
2021-09-20 15:30:47 -07:00
dc1fd3d9ba
PNS test app: Add logging information for curved track routing
2021-09-20 20:35:24 +01:00
4d478d6f17
Fix ordering of initialization in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9161
2021-09-14 07:48:02 -04:00
fdfecf5932
Don't push view control settings to the previous active tool.
...
See further comments in bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9147
2021-09-13 13:28:05 +01:00
092cdc0bb5
Move 45° limit to hotkey
...
This assigns the "Tab" key to a general pcbnew 45° limitation. Limit
can be enabled/disabled using context menu as well.
Removed the user preference for 45° limitation on graphic lines as that
is overlapping with the general limitation, which is not an editing
preference so much as a temporary adjustment to tool action.
Related to https://gitlab.com/kicad/code/kicad/-/issues/8490
2021-09-05 13:42:51 -07:00
Jeff Young
Seth Hillbrand
Mike Williams
Ian McInerney
Mark Roszko
Alex
Roberto Fernandez Bautista
Stefan Hamminga
Tomasz Wlostowski
Jon Evans
jean-pierre charras
Wayne Stambaugh
Johannes Pfister
Electro707