c4a6a61743
Don't truncate values on import
...
Leads to off-by-one errors when converting to internal values
Fixes https://gitlab.com/kicad/code/kicad/issues/9827
2021-11-30 16:10:56 -08:00
515aed7408
Make Clone functions for NETINFO_ITEM and PCB_MARKER
2021-12-01 00:47:22 +01:00
5dcd6f89d3
Don't register DRC error on internal approximation
...
Users can set the internal approximation of curves, which will create
small errors off of ideal locations. This will cause DRC errors on some
items such as rounded rect pads when elements are routed at the minimum
ideal distance. Users could already tune this value using the Advanced
Config values but we'd rather the user not depend on that.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9833
2021-11-30 15:28:20 -08:00
3af65936c1
Don't consider heatsink, castellated or fiducial pads for THT vs SMD.
...
Also fixes a bug where the Footprint Checker's marker list wasn't cleared
correctly from the last run.
Fixes https://gitlab.com/kicad/code/kicad/issues/9821
2021-11-29 16:45:42 +00:00
3218665861
Revert "Sync action plugins every time PCB frame is created"
...
This reverts commit 69566b25b1https://gitlab.com/kicad/code/kicad/-/issues/9798
2021-11-28 16:16:14 -05:00
3886e681ae
PAD Copy CTOR: fix missing copy of m_pinType member.
2021-11-28 14:34:26 +01:00
f5246acf37
PCB_PAINTER: draw PAD do not always replace netname by "x".
...
When a pad net is edited inside the board editor, its netname is no longer
its corresponding pin netname.
Fixes #9795
https://gitlab.com/kicad/code/kicad/issues/9795
2021-11-28 14:34:26 +01:00
a746d31038
PNS: Fix loop removal outside shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9680
2021-11-27 15:21:47 -05:00
8a0f8c329f
PNS: Fix DP gateway generation when pad distance < gap
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9306
2021-11-27 14:03:19 -05:00
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
b0d7c1a810
Don't leave orphaned nets in pads after editing in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9789
2021-11-27 12:34:41 +00:00
b8b8c0d34c
dialog text properties: fix a focus issue.
...
Fixes #9792
https://gitlab.com/kicad/code/kicad/issues/9792
2021-11-27 10:08:30 +01:00
6652e5acf4
Draw pad holes when dragging.
...
Most of the time they're under the pad, but the provide needed
info when the hole is larger than the pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:09 +00:00
9547c72e73
Teach router about different keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:04 +00:00
6f0a4ccdee
Formatting.
2021-11-26 18:14:29 +00:00
69566b25b1
Sync action plugins every time PCB frame is created
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9781
2021-11-26 09:58:48 -05:00
99ec2b1801
Don't hide original object when highlight is only part of it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9772
2021-11-25 23:42:13 +00:00
da458535c4
PNS: Avoid flickering clearances on new items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:38:04 -05:00
63718323bc
PNS: Holes need to be moved with solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:31:18 -05:00
8026863d4c
Use progress reporting in more places when loading a board
...
Prevents application-not-responding events while opening large designs
2021-11-25 11:19:03 -05:00
b4342d813b
Fix SHAPE_LINE_CHAIN::Slice when end is an arc followed by a point
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9770
2021-11-25 10:05:33 -05:00
ade8fe4333
When dragging footprints pads with holes also need to be taken along.
...
Otherwise (aside from not colliding with their dragged location) we
won't update their locations and then if they happen to be the first
pad in the footprint we'll try to update the footprint's location post-
drag with the pad offset (which will be {0,0}.
This is easily reproducible with the test document in the bug in the
"fixes" statement.
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
f9e1429c60
Naming conventions.
2021-11-25 14:54:12 +00:00
5985a21b74
Offset internal items by drag amount.
...
Some tools move only preview items while keeping the real items
hidden. Those tools must use this new offset parameter.
Other tools move the real items. Those tools can ignore this
parameter (which will default to {0,0}).
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
ba6ae4fa9b
Kicad has many plugins. This one is for the pcb.
2021-11-25 12:56:46 +00:00
6ecdbbb1da
Remove some duplicate work when loading a board
2021-11-24 22:04:16 -05:00
06f206104d
Pcbnew: fix chamfered rectangular pad definitions in GenCAD exporter.
...
The pad comparison function was never updated when chamfered rectangular
and custom pads were added so if more that one variant of either of those
pad types existed in a design, only the first one would get generated and
assign to every pad of that type.
The custom pad primitive comparison has not be implemented so the exported
designs may be broken for custom pads.
2021-11-24 12:54:44 -05:00
c0fdac2774
DIALOG_TRACK_VIA_PROPERTIES: Do not use wxcombobox selection as temporary variable.
...
Fixes #9746
https://gitlab.com/kicad/code/kicad/issues/9746
2021-11-24 17:36:10 +01:00
b6ea9afb4f
DIALOG_PAD_PROPERTIES: fix 2 issues: missing initial value for roundrect corner radius
...
and missing resize pad display panel (minor cosmetic issue).
Fixes #9755
https://gitlab.com/kicad/code/kicad/issues/9755
Fixes #9703
https://gitlab.com/kicad/code/kicad/issues/9703
2021-11-24 09:44:13 +01:00
f97c7c78c8
Connect ruler tool with axes preferences
...
Adds "UpdatePreferences" action that is called when the preferences are
updated, allowing running tools to act on changes that may affect them
Fixes https://gitlab.com/kicad/code/kicad/issues/9737
2021-11-23 12:52:21 -08:00
1c3e1df3ca
Not all holes are round.
...
We currently only need this to work for vias as we're a long way
from being able to support it for pads, so just check the hole
shape.
Fixes https://gitlab.com/kicad/code/kicad/issues/9735
2021-11-23 14:36:05 +00:00
e56e61ffb5
router: fix typo in the DP tuning fix patch
2021-11-23 00:21:38 +01:00
126563c839
Fix initilization project / ordering
...
We cannot resolve the Canvas type without the canvas being initialized.
But saving settings sometimes requests canvas access. This protects the
calls against failure by checking for canvas before saving
canvas-specific settings
Fixes https://gitlab.com/kicad/code/kicad/issues/9729
2021-11-22 11:47:42 -08:00
5060c73625
Reject broken footprint files
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9721
2021-11-22 16:48:05 +01:00
89228e1ebe
router: increase parallelity detection threshold for AssembleDiffPair()
...
Partially fixes the misrecognized diff pairs issue.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8567
2021-11-22 01:35:12 +01:00
8777ce3d4e
TEMP_SELECTED is in m_flags, not m_status.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 23:52:45 +00:00
e60386f028
router: disable 'limit corner count' optimization for via dragging
...
It seems to be completely preventing optimization instead of preventing over-optimization in case the head is a dragged via.
To be investigated in more details in V7.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
ccf9a72078
router: fix ghost dots issue in router preview items
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
3f2d86adec
Make OpenGL default for all apps
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9699
2021-11-21 12:33:07 -08:00
bbafce6ab3
PNS: Don't clip the line in the middle of an arc - just start again
...
In shove mode, returning an empty line results in keeping the current
head, which should be okay for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2021-11-21 19:53:03 +00:00
4e0ad07eb0
PNS::Shove Add margin when generating hulls for arc segments
...
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
There is still a case where if the shover does not find a solution,
we try clipping the arc and it still collides.
2021-11-21 17:13:21 +00:00
90157db537
PCB_PARSER: add timeout for of 100 ms for refreshing the progress window.
...
The previously used line number threshold was causing (on some systems) severe slowdown in loading
due to relatively long redraw time of the progress bar window.
2021-11-21 17:33:59 +01:00
b1878fcc54
ClipVertexRange: fix fallout of NextShape API change
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9711
2021-11-21 11:03:22 -05:00
302c5ab537
Fix an issue created by commit 9e3362d1.
...
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
cf1d5f5724
Teach selectConnectedTracks() about layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 13:53:43 +00:00
229706b48a
Formatting.
2021-11-21 13:53:43 +00:00
c40e921cb3
router: remeber to make a shove lockpoint when placing a lone via
...
Note to self: works around a possible bug in CommitPlacement()/RewindToLastLockedNode()
fixes: https://gitlab.com/kicad/code/kicad/-/issues/9695
2021-11-21 00:18:20 +01:00
c1703212dc
"Document" properties go in File menu; Edit menu is for item props.
2021-11-20 22:44:43 +00:00
9e3362d14c
Snap mouse point before picking startItem.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9700
2021-11-20 13:44:16 +00:00
1f4858c314
Show holes in router preview items for vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9658
2021-11-20 12:21:24 +00:00
766a09c338
Remove autocomplete when we lose focus
...
Prevents the excess dropdown from persisting over windows
Fixes https://gitlab.com/kicad/code/kicad/issues/9651
2021-11-19 17:24:16 -08:00
7529eb1812
SWIG out connected item vector for use
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8566
2021-11-19 13:39:06 -08:00
c01649fc6e
Make it easier to open legacy files.
2021-11-19 13:36:14 +00:00
d76c6bc884
Add NewBoard API to allow standalone BOARD creation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9687
2021-11-18 21:43:05 -05:00
c5ddb8de26
Hide confusing lowercase version of GetCenter from SWIG
2021-11-18 21:21:22 -05:00
1d2fd6d271
Change persistent 45° state to only drawing
...
Move/edit points have a lossy state that holds only for the time in
which the tool is active. It reverts back to non-constrained after
completion of the move/point edit
Fixes https://gitlab.com/kicad/code/kicad/issues/9574
2021-11-17 15:38:28 -08:00
e57ef66971
Fix build error with wxWidgets 3.0.
2021-11-17 12:28:23 -05:00
ffae6c8f56
Fix hole table grow issue.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9666
2021-11-17 12:49:53 +00:00
a699cccaaf
Fix two string issues
...
Comp -> Compatible
Update string reference to changed string
2021-11-16 10:38:56 -08:00
ed478f5ec0
Revert to ERROR_INSIDE for complex pad shape hulls in PNS
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9544
2021-11-15 19:15:05 -05:00
a4e9beeeac
Coverity issue fix.
2021-11-15 14:02:28 -05:00
ab2eae6f48
Implement a more nuanced firstFocus for Track & Via Properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9645
2021-11-15 13:02:41 +00:00
9d587e3e6e
Import Eagle rects, polys and circles with 0 width as filled.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9639
2021-11-14 23:50:05 +00:00
66d9e7073f
More discrete borders for Kicad mgr, PCM and appearances panels.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9616
2021-11-14 15:01:44 +00:00
591fbf6383
altium: use arc angle to determine winding direction
2021-11-14 14:45:07 +01:00
80c5b1efb1
File formatting improvements and fixes.
...
Symbol library IDs included the library nickname which is incorrect
and meaningless since it will be overwritten by the symbol library
table code. This is not a file format change as there are no behavioral
differences.
2021-11-13 12:57:18 -05:00
53f5d616aa
Coverity issue fixes.
2021-11-13 11:38:31 -05:00
eb3d8dbcc8
DIALOG_FOOTPRINT_PROPERTIES: fix an issue when a layer selector widget is selected.
...
When resisting the dialog, the widget was not moved.
Fixes #9617
https://gitlab.com/kicad/code/kicad/issues/9617
2021-11-13 11:12:08 +01:00
2c870acaac
Fix arc exporting to GenCAD.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9597
2021-11-12 18:07:31 +00:00
381da21609
Don't inc/dec to netclass track width value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9622
2021-11-12 17:50:34 +00:00
879254abff
Remove track min width from the status bar.
...
It presents an over-simplified picture. Better to use Inspect >
Constraints Resolution....
Fixes https://gitlab.com/kicad/code/kicad/issues/9623
2021-11-12 17:31:50 +00:00
fd6a75b779
Do not call TransformToPoly for negative sized PADs
2021-11-12 15:40:08 +00:00
b46b27fe8c
Altium import: Avoid illegal filenames when writing embedded 3D models
2021-11-12 14:49:22 +00:00
a9b4465703
Altium import: Use UTF16 string table for PCB texts
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7948
2021-11-12 14:49:22 +00:00
992fc83870
Pcbnew: fix GenCAD exporter bug.
...
The chamfered rectangle pad coordinate export was in the absolute board
position instead of relative to the footprint origin which GenCAD expects.
This fixes KSC ticket #413 .
2021-11-11 17:31:52 -05:00
8ec3ce99ae
PNS: Update shover when autocompleting on item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9598
2021-11-10 18:17:56 -05:00
13f081549c
CADSTAR PCB: Use all User layers when mapping documentation layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9577
2021-11-10 21:47:22 +00:00
ad2e780a2c
CADSTAR PCB: Correctly load pads with holes
...
If the THROUGH_HOLE attribute isn't set, it just means that the pads
are only present on one side of the board, but there can still be a
plated / non-plated hole.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9579
2021-11-10 21:21:32 +00:00
f6c160eb50
Apply a big hammer for python script refreshing.
...
While not ideal, this should tide us over until we have a commit
architecture for python scripts.
Fixes https://gitlab.com/kicad/code/kicad/issues/7065
2021-11-09 18:47:47 -05:00
0dcbfa2b69
Always use UUIDs for implicit keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9580
2021-11-09 17:57:47 +00:00
c0a6014114
Save actual control values; GetOriginalText is only for eval.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9575
2021-11-09 13:53:03 +00:00
0631c8fc74
Fix logic bug when updating circular pad points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9576
2021-11-09 13:14:24 +00:00
18d9f6e323
Reduce auto.
2021-11-09 13:14:24 +00:00
59807d8d26
A better solution to discarding pending shove operations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9553
2021-11-09 00:00:54 -05:00
0234ae3003
Add CloneFrom API for BOARD_DESIGN_SETTINGS in SWIG
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6885
2021-11-08 23:01:24 -05:00
75d75799f7
Move to getters/setters for aux and grid origin
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8836
2021-11-08 22:36:40 -05:00
6cc6f06a9a
Millimetres -> Millimeters
2021-11-08 15:56:51 -08:00
6569337d27
Haching -> Hatching
2021-11-08 15:56:51 -08:00
2f1a3827cf
Solder paster -> Solder paste
2021-11-08 15:56:51 -08:00
6af031be05
Use double-quotes for rule expressions.
...
The Mac double-quote bug is now fixed and strings inside expressions
are single quoted making single-quoting the entire expression pretty
hard to visually parse.
2021-11-08 20:53:59 +00:00
b1e8241ebe
Update pin type as well as function from existing when updating fp.
2021-11-08 20:53:59 +00:00
d0014a307d
Reduce the artificial gravity for selecting vias by a bit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9563
2021-11-08 20:53:59 +00:00
81fc7c71d1
Handle blind/buried vias in Eagle import
...
Don't sanitize layers before setting type
Fixes https://gitlab.com/kicad/code/kicad/issues/9557
2021-11-08 12:46:54 -08:00
7fd669b6a8
Use green soldermask and white silkcreen when unspecified
...
Also - unspecify colour of soldermask by default
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9538
2021-11-07 15:35:14 +00:00
dbad85d405
Remove instances of "auto".
2021-11-07 14:12:44 +00:00
97e9348ee1
Fix typo "verical" -> "vertical"
2021-11-06 20:39:19 +00:00
8f0b61715b
Fix tooltip about Edge.Cuts (not) being plotted on all layers, remove period
2021-11-05 23:38:14 +00:00
6aa7602c32
CADSTAR PCB: Reverse anticlockwise arcs before adding to the chain
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9533
2021-11-05 17:13:02 +00:00
8314251fa1
CADSTAR PCB: Force white silkscreen and green soldermask
...
We don't know the actual colour from the design, but this is the most
common used in the industry.
2021-11-05 17:13:02 +00:00
93e163b98d
Do not replace delimiter " by ' inside a command string.
...
Fixes #9528
https://gitlab.com/kicad/code/kicad/issues/9528
2021-11-05 13:24:38 +01:00
792a8dca9d
Fix errant wxassert about expand and center align
2021-11-04 22:55:40 -04:00
393c84e67a
Fix sketch mode rendering of beziers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9522
2021-11-04 12:57:16 +00:00
cf6b18ec7e
Remove escaped double-quotes
...
For some reason, escaped double quotes in wxString::Format cause issues
on Mac. We can replace them with single quotes in most places without
loss of clarity
2021-11-03 17:03:14 -07:00
b022b314a4
Account for pad hole is BBox
...
The bounding box is used for hit testing. If the hole is arbitrarily
larger than the pad, we need to allow the user to properly select it
2021-11-03 14:33:44 -07:00
ffd1139cfe
Make sure a pad is at least as big as its hole in the RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9516
2021-11-03 18:53:26 +00:00
762cd5a32f
Add PLACE_FILE_EXPORTER to swig to call in python
2021-11-03 16:32:05 +00:00
6b432e895a
DIALOG_COPPER_ZONE_BASE: fix incorrect max value of zone priority.
2021-11-03 11:49:38 +01:00
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
522359ccbf
Improve comments.
2021-11-02 20:07:34 +00:00
3c78bf4ef8
One active point at a time.
2021-11-01 16:17:33 +00:00
f4cd57f815
Reserve production strings
2021-11-01 07:14:38 -07:00
153594b9ea
PNS: Actually implement the AbortRouting API
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9425
2021-10-31 16:06:57 -04:00
22ba640c2b
Remove locking from footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9496
2021-10-31 16:33:03 +00:00
e3ef101ec9
Add missing view controls for FP Editor Appearance Manager.
2021-10-31 16:33:03 +00:00
b2db24f275
CADSTAR PCB: Don't invert Text Angle for mirrored text
...
It matches the original cadstar when we don't invert
2021-10-30 18:14:23 +01:00
d4537b6f53
Coverity issue fix.
...
Remove uninitialized member variable as it was unused rather than
initialize it which would have made Coverity happy.
2021-10-30 11:52:06 -04:00
5f8e0ef1e0
Patch up arc hit-testing and printing for 6.0
...
This could use another look when we're not so near release. We
really shouldn't need to special case eeWinding vs. not eeWinding.
Fixes https://gitlab.com/kicad/code/kicad/issues/9491
2021-10-30 15:10:07 +01:00
08700e3522
Router: show corner style in message panel
2021-10-30 09:08:52 -04:00
08bf28b95d
Fix disabling free-angle mode
2021-10-30 09:08:35 -04:00
e6c3027531
Action string typo fixes
2021-10-30 08:47:36 -04:00
48be569a29
DIALOG_PAD_PROPERTIES: use our UNIT_BINDER to manage pad rotation and remove
...
the wxFloatingPointValidator (that has also issues with fp separator).
Try to fix a bug related to pad rotation in some locales (see bug 9331).
2021-10-30 12:39:33 +02:00
08938463f1
Fix off-by-one error in via sizes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9486
2021-10-29 20:45:42 +01:00
ffddefc532
Minor dialog layout improvements.
2021-10-29 15:29:49 -04:00
63d4d84aaa
pcbnew, router: fix a crash and some other issues related to microvias and blind/buried vias
...
- fix crash when trying to create a microvia from a internal layer (boards with > 4 layers)
- fix a bug that allowed to create a non through hole via on only one layer
- fix a bug that allowed to create a microvia on non adjacent layer pair
- when placing a via and selecting the target layer from dialog, show only allowed layers.
Fixes #9477
https://gitlab.com/kicad/code/kicad/issues/9477
2021-10-29 17:54:04 +02:00
71b07b59c5
Pcbnew: Added "All Items" clear/set to "Filter Selection" dialog
2021-10-29 09:56:14 +00:00
c47e5ce577
Improve clearance outline tooltip.
2021-10-29 00:17:06 +01:00
1abd45ac15
Report nets on pads.
2021-10-29 00:17:06 +01:00
4afb59fda0
Added feature to switch between router modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9414
2021-10-28 22:46:05 +00:00
1dbe8442b1
fp editor: fix crash (null pointer) when trying to drag an item.
...
(there is no roter tool in fp editor)
Fixes #9476
https://gitlab.com/kicad/code/kicad/issues/9476
2021-10-28 11:51:04 +02:00
4a9b3d9673
PNS: clear leftover vias from previous trace in DP placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9283
2021-10-27 21:58:42 -04:00
e9661161d2
Fix missing member variable in swap().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9470
2021-10-27 21:57:20 +01:00
54be0da33d
Pcbnew: minor plot dialog improvements.
2021-10-27 11:36:43 -04:00
4fe025909d
Fix centered rotated text in Pcbnew Eagle importer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9466
2021-10-27 14:38:42 +01:00
e12f9a194d
Fix Eagle arc importing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9466
2021-10-27 02:36:43 +01:00
0c99c99e12
Do not assign priorities to rule areas
...
As noted by @jeffyoung, we shouldn't set priorities to rule areas as
this can expose unexpected issues
Related to https://gitlab.com/kicad/code/kicad/-/issues/7776
2021-10-26 11:16:04 -07:00
5b9519da6c
Fix arc formatting in Fabmaster import.
2021-10-26 17:52:10 +01:00
341b0a5652
Don't depend on a keepout zone having no priority.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7776
2021-10-26 17:20:09 +01:00
c13ff9cec9
Formatting.
2021-10-26 17:19:30 +01:00
f724fe7eff
Move bbox padding to RTrees so it doesn't interfere with hittesting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9361
2021-10-26 13:46:30 +01:00
1f7fd436a2
Move board object polygon code into the object source files.
...
Having the board object polygon code all defined in a separate file made
finding the polygon code for an object difficult to find.
2021-10-25 17:42:11 -04:00
a79a221257
Array creator tool: Add option to assign unique reference designators
...
ADDED: Option to assign unique reference designators to footprints
created with the array tool [pcbnew]
CHANGED: Array creator dialog no longer displays pad numbering properties
when in the board editor. [pcbnew]
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2354
2021-10-25 22:38:49 +01:00
36d11f745e
Update ratsnest while dragging footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-10-25 21:45:30 +01:00
7812dc1a67
Fix hard-coded limit to dp choice
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9459
2021-10-25 10:45:59 -07:00
ea4e06124e
Edit library footprint command
...
Provides missing PCB_ACTION for the edit library footprint command. This is
needed for python control of the command
Fixes https://gitlab.com/kicad/code/kicad/issues/9454
2021-10-25 09:25:37 -07:00
bba742b804
pcbnew: support vertex line start/end width to correctly import certain DXF files
2021-10-25 17:39:09 +02:00
df47c1c4e9
pcbnew: use doubles to pass line widths in the DXF importer as they are expressed in DXF's units and can case severe rounding errors when passed as ints
2021-10-25 17:36:04 +02:00
8a3bc3fe4d
Don't translate empty strings
...
The _( "" ) msgid is reserved in gettext, so we need to avoid it in code
2021-10-25 06:24:06 -07:00
5475303ec2
Allow loading secondary boards from Python
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9271
2021-10-24 14:06:38 -04:00
d202b78dc4
Fix disable warnings to be compatible
...
GCC and Clang both support the short mnemonic `-w` to disable warnings,
so use that to be compatible
Fixes https://gitlab.com/kicad/code/kicad/issues/9446
2021-10-24 07:30:39 -07:00
c9d858eaf5
Add status bar message for constraint mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9282
2021-10-24 14:04:12 +01:00
Seth Hillbrand
Mikolaj Wielgus
Jeff Young
Jon Evans
jean-pierre charras
Wayne Stambaugh
Tomasz Wlostowski
Simon Schaak
Roberto Fernandez Bautista
Thomas Pointhuber
david-beinder
Mark Hämmerling
Marek Roszko
Asuki Kono
Johannes Pfister
Peter Montgomery
Electro707