We do not allow non-copper routed tracks and they will break assumptions
elsewhere in the code. We drop them in the beginning so that they are
not saved.
Oblong holes (slots) use now a aperture attribute similar to round holes.
(The previous attribute "slot" is now deprecated)
However they have a specific aperture, and a comment is added in drill files for these apertures.
Prevent the symbol and footprint library table editors from substituting
the current project path (${KIPRJMOD}) when adding libraries to the global
library table. This will almost assuredly fail when opening a different
project. We still allow users to manually use ${KIPRJMOD} in global table
paths under the assumption that if they are typing this in then they most
likely understand environment variable substitution.
Fixes lp:1830694
https://bugs.launchpad.net/kicad/+bug/1830694
(cherry picked from commit 288982b15d)
Footprint library nicknames are case sensitive but the comparison for
the library tree control was case insensitive.
Also make the footprint name comparisons case sensitive as well. While
not strictly necessary, the plan is to start using the name defined in
the footprint file instead of the file name which will allow for case
sensitivity.
Fixes lp:1833701
https://bugs.launchpad.net/kicad/+bug/1833701
Non-copper zones do not have a fillet/chamfer option, so we need to
clear it before the zone tool uses the last-used option.
Fixes: lp:1833672
* https://bugs.launchpad.net/kicad/+bug/1833672
The previous commit missed a case where the number was so large that it
overflowed the integer invalidating the comparison. This protects
against that case by using floating point comparison.
This checks the movement against a maximum value that would place the
selection outside of the valid area for the footprint or board.
Fixes: lp:1833478
* https://bugs.launchpad.net/kicad/+bug/1833478
Custom pads are referenced to the anchor pad 0-point, so flipping the
polygon should be about 0 and not the flip point.
Fixes: lp:1831311
* https://bugs.launchpad.net/kicad/+bug/1831311
DIALOG_EXIT was not being laid out correctly after setting the dialog
message. Rather than fix our custom DIALOG_EXIT, wxMessageDialog and
wxRichMessageDialog were substituted as direct replacements for all
of the variants of DIALOG_EXIT. This make message dialogs appear more
consistent because wxMessageDialog uses the default platform message
dialog and wxRichMessageDialog uses the default platform rich message
dialog on windows.
Remove DIALOG_EXIT_BASE as it is no longer required.
Fixes lp:1832899
https://bugs.launchpad.net/kicad/+bug/1832899
(cherry picked from commit 3f665318f4ab5c02b7d3c29b5233a273fdac2e4e)
Create a new action in pcbnew, gerbview and the footprint viewer/
editor to display the help documentation. Disconnect the wxID_HELP
event from the window so that it no longer conflicts with the zoom
action.
Fixes: lp:1822041
* https://bugs.launchpad.net/kicad/+bug/1822041
Mouse capture end is called by some actions such as save board. This
resets the cursor image but doesn't change the current tool. Resetting
the cursor image during action prevents this.
This standardizes the import vector graphics file dialog to use the
sbSizer titles instead of bold+lines. Tooltip changes will be in the
next change as we don't change strings for bugfix releases and this
commit is targeted for 5.1.3
Fixes: lp:1823462
* https://bugs.launchpad.net/kicad/+bug/1823462
(cherry picked from commit f7550940ee)
We prevent the creation of invalid polygons by keeping the converging
lines from intersecting. This test doesn't make sense for triangular
polygons as they always intersect and we want to allow them to move
outside of the singular point.
Fixes: lp:1831481
* https://bugs.launchpad.net/kicad/+bug/1831481
Building custom targets that depend on custom commands such as our
keyword lexer requires two layers of indirection to pick up changes
properly and not overwrite the same file in parallel builds.
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
(cherry picked from commit c6af38477d)
Grid and ratsnest visibility are stored in the board file and should not
be changed without the user explicitly modifying them.
In the future, we'll move these settings out of the board file but we
shouldn't cause extra file-churn for flipped bits.
Fixes: lp:1828285
* https://bugs.launchpad.net/kicad/+bug/1828285
(cherry picked from commit e7e20b85b5)
Always check the return value of PyRun_SimpleString() for errors when a
Python script is run and show an error message rather than fail silently.
Enable Python interpreter I/O redirection in debug builds so that script
string errors will be shown when PyRun_SimpleString() is called.
Do not call PyErr_Print() after a PyRun_SimpleString() call failure. It
doesn't do anything useful.
Do not call Py_Finalize() after a PyRun_SimpleString() call failure. It
seems to cause Pcbnew to crash.
(cherry picked from commit 816f6db310)
KiCad does not allow references to be numeric only. This prefixes such
references with "UNK" to note that the reference designator type is
unknown.
(cherry picked from commit a62a89eac3)
Sometimes we want to inflate a polygon without adding rounded edges.
This add the option using the jtMiter setting.
This is used in the Eagle parser to expand the Eagle zones for KiCad.
Eagle Zones are drawn on the polygon edge, so they extend out from the
outline. KiCad zones are drawn inside the polygon. We need to both
increase the zone size and decrease the minimum pen width to account for
this.
Fixes: lp:1817312
* https://bugs.launchpad.net/kicad/+bug/1817312
(cherry picked from commit 490c805319)
Eagle parsing allows pin 1 to be different from the other pins in the
package but this is set by a tag marking the pin as "first" rather than
the actual number of the pin.
Fixes: lp:1829251
* https://bugs.launchpad.net/kicad/+bug/1829251
(cherry picked from commit dbc40096db)
Some how a board object was required to fetch the line width when a
footprint is being parsed. The problem is that there is no board
defined when loading Eagle footprint libraries so there was a nullptr
segfault as a result. When there is no board defined, use the default
KiCad layer line widths.
Fixes lp:1829243
https://bugs.launchpad.net/kicad/+bug/1829243
(cherry picked from commit 97166a72f5)
This is a stop gap fix. It should be possible to use the wxFrame title
string for this but some of the frame windows have appropriated the title
string for configuration file naming purposes which is less than ideal.
Fixes lp:1825977
https://bugs.launchpad.net/kicad/+bug/1825977
(cherry picked from commit 3c4f8c1bf7)
When using "Place Text" the crosshair was freezing if cancelled before
placing text.
After the crosshair freezes, the next uses of the "Place Text" or
"Add Dimension" caused the crosshair to jump to the screen location
where the previously the crosshair was frozen.
Cancelling the "Add Dimension" caused the crosshair to jump to the
screen location where the crosshair was when cancelled on the next use
of the "Place Text" or "Add Dimension".
Fixes: lp:1822578
* https://bugs.launchpad.net/kicad/+bug/1822578
The SVG importer is an advanced config. It's not supported or
normally available in 5.1, so don't advertise in the menu.
If the advanced config is enabled, the dialog will be able
to import SVG.
This could have been "Import *Vector* Graphics" like in master,
5.1 documentation will probably still say "DXF", so keep consistent.
Fixes: lp:1821571
* https://bugs.launchpad.net/kicad/+bug/1821571
When Pcbnew's add footprint browser is run up, it constructs
the recently used list without checking for nulls.
Although the DoAddLibrary call does internally check for
null, it's easier to filter these out before placing into
the vector in the first place.
The same logic in the symbol tree is already handled in the
same way.
(cherry picked from commit 42d20cbd96)
Move repeated GAL config reading routines into GAL_DISPLAY_OPTIONS.
THe app-level config is in here already, do the same for the
common config.
This means that the configs are loaded consistently, which fixes
the symbol-chooser preview window, which previously didn't use the
same config routine as other GAL canvases.
Future work could move these functions to free functions that
act on the public interface of GAL_DISPLAY_OPTIONS to avoid
GAL_DISPLAY_OPTIONS having to know about wxConfig and wxWindow.
Fixes: lp:1824524
* https://bugs.launchpad.net/kicad/+bug/1824524
(cherry picked from commit ab2281d26f)
Previously, the GAL_DISPLAY_OPTIONS object in FOOTPRINT_PREVIEW_PANEL::New
was passed by reference in the ctor, down to EDA_DRAW_PANEL_GAL, which stored
it as a reference. The object in New() then goes out of scope, so the
referencing panel outlives the options.
Fix this by making a copy in a std::unique_ptr of the options, and giving
ownership to the panel.
There is another issue here: when the Pcbnew options are copies, the
OBSERVABLE subscriber list is copied too. This means if the panel called
NotifyChanged() on the options, Pcbnew would get updates, even though a copy
of the options changed. However, the panel doesn't change the options or
notify, so it's OK for now.
(cherry picked from commit 17e88d0944)
The 3D viewer also uses OpenGL, so it also needs to
adjust based on DPI scale factors.
This patch moves the 3D viewer common config code solely
within the 3D viewer, and adds handling of the DPI scale. This
also avoids duplicated logic in PCB_BASE_FRAME::CommonSettingsChanged.
For now, as EDA_3D_VIEWER is not included in the Kiway settings
dispatch, still manually invoke the settings update from
PCB_BASE_FRAME.
The PANEL_3D_PREV gets a similar function to read the config, but
it doesn't have a listener for the update, so it's set just once
at dialog init, just like the existing pan settings.
Fixes: lp:1823681
* https://bugs.launchpad.net/kicad/+bug/1823681
(cherry picked from commit 124dd5e59a)
This behavior existed in 5.0.x but did not properly exit the edit tool
in 5.1. This removes stops the edit tool when we begin dragging a track
using the interactive router.
Fixes: lp:1820312
* https://bugs.launchpad.net/kicad/+bug/1820312
(cherry picked from commit c8118e3ce4)
When removing a point from the polygon, the vertex is removed before it
is tested for validity. If it fails validation, the edit is reverted
and the point count doesn't change, so the view update only modifies the
existing points. But the revert may also have changed the shared
pointer to the point array, invalidating the view's copy.
Fixes: lp:1821909
* https://bugs.launchpad.net/kicad/+bug/1821909
(cherry picked from commit 940aef77af)
There is a circular dependency between the GRAPHICS_IMPORTER object and
the GRAPHICS_IMPORT_PLUGIN object which makes sharing the settings in
the GRAPHICS_IMPORTER unwieldy. This fix is a ugly hack that resolves
the issue. The underlying issue will require some major refactoring.
Fixes lp:1821234
https://bugs.launchpad.net/kicad/+bug/1821234
(cherry picked from commit 120ab06db4)
Improve padding, spacing and alignment of dialog layout.
Fix title capitalization.
Make file dialog wildcard string translatable.
Remove fixed initial dialog size to allow sizers to work their magic.
Replace OK button event handler with TransferDataFromWindow.
Remember last line width units between dialog instances and sessions.
Save configuration file settings in a separate group and remove GfxImport
prefix from the entry names.
Add fencing to dialog header file to prevent nested includes.
Fixes lp:1822568
https://bugs.launchpad.net/kicad/+bug/1822568
(cherry picked from commit d2cb0ca75f)
This inserts a translation map in the layer names so that the old stable
files with Italian/French layer names get updated to the standard
English layer names (instead of not opening).
Fixes: lp:1370575
* https://bugs.launchpad.net/kicad/+bug/1370575
(cherry picked from commit 6f4d1345f3)
Save/restore default netclass.
Read layers back in with correct syntax ('.' between keyword and layer name).
Write layers to project file.
Read/write layer enablement bits.
Don't set solder paste margin min to 0 (most of them are negative).
Fixes: lp:1811990
* https://bugs.launchpad.net/kicad/+bug/1811990
Tab through the grid vertically, then horizontally, as the fields
are laid out with "related" fields (like the co-ords) vertically.
Also neaten headers.
Fixes: lp:1821887
* https://bugs.launchpad.net/kicad/+bug/1821887
(cherry picked from commit d6b8e9e037)
Commit 6006703798 fixed a crash but broke the filled zones changes detection.
Filled zones were always seen as not up to date due to the fact the filled areas were cleared too early.
The up to date detection is also optimized: the old filled polygons are no longer stored.
Instead of, the MD5_HASH is calculated and stored before clearing the filled polygons.
Autosave was not working correctly, partly due to different
implementations in eeschema and pcbnew and partly due to a mistaken
refactor at some point during v5 development. This unifies the expected
autosave prefix to _autosave- for both pcbnew and eeschema. It also
unifies the expected suffix for the backup files to -bak.
Fixes: lp:1820433
* https://bugs.launchpad.net/kicad/+bug/1820433
(cherry picked from commit 078320e2fb)
The bounding box calculation needs to be fast and is threaded in many
places in pcbnew. We cannot invalidate items (the function is const but
this wasn't caught at compile-time for some reason) when getting the
bbox. This shouldn't be an issue as the m_BezierPoints is rebuilt each
time the curve is updated, so rebuilding during the bbox seems extra.
Fixes: lp:1819984
* https://bugs.launchpad.net/kicad/+bug/1819984
(cherry picked from commit ec24981cc8)
Previously, refilling a zone after edition was made silently,
thus creating not understandable but very noticeable freeze time for complex zones.
(cherry picked from commit 3692c511d0)
Removing existing fills will prevent re-drawing invalid polygons before
they are ready. This seems to happen on Macs more easily due to redraw
timing.
Fixes: lp:1819553
* https://bugs.launchpad.net/kicad/+bug/1819553
(cherry picked from commit 6006703798)
This was due to the stub removal tests if a stub end is outside a solid area to remove it.
There is a corner case: is the stub end is exactly on a solid area outline extra segment
created by Fracture() used in calculations.
The stub removal tests are now made before fracturing.
Fixes: lp:1819317
https://bugs.launchpad.net/kicad/+bug/1819317
(cherry picked from commit b9944e2c06)
The module refdes always increment by one. This is problematic
for two reasons:
* It doesn't work when more than one FP is selected (say you have
C1 and C2, you get C1, C2, C2, C3)
* It messes with simple panellisations
The 5.0.x behaviour is to not renumber in Pcbnew, so revert to
that behaviour.
Better refdes incrementation can come post 5.1, as this will need
new strings and UI.
Fixes: lp:1819106
* https://bugs.launchpad.net/kicad/+bug/1819106
Disable the text update event for the orientation cutom value field before
updating it when the radio buttons are selected. This allows to use the
conventional EVT_TEXT handler, rather than KEYDOWN, which has two effects:
* Tabbing though the dialog no longer sets custom orientation
* Click-driven clipboard actions trigger the update correctly.
Introduce a helper function in validators.h to assist in updating
validated fields without triggering further events.
Fixes: lp:1819006
* https://bugs.launchpad.net/kicad/+bug/1819006
When checking for closed outlines, we generate a board area using the
pcb structure. We now also check for overlapping outlines due to
lp:1818163 However, the DRC maintained its previous outline before
generating the new one, causing an overlap error.
This regenerates the board outline from zero for each DRC run.
Fixes: lp:1819012
* https://bugs.launchpad.net/kicad/+bug/1819012
pcbnew refreshes the viewItem for the worksheet multiple times. This
requires setting the filename to get parameters displayed on the
worksheet correctly.
Fixes: lp:1819000
* https://bugs.launchpad.net/kicad/+bug/1819000
Depending on thermal reliefs size, the polygons could be self intersecting,
and these self intersecting polygons are unexpected in zone calculations.
Other fix: the width of thermal stubs is clamped to the size of pads.
Previously, a bug in clamping calculations prevents constraining thermal stubs width.
Fixes: lp:1818752
https://bugs.launchpad.net/kicad/+bug/1818752
Set the focus to some control in the copper zone, non-copper zone, and
keep out zone dialogs required for the default button action to work
properly. This only seem to affect windows dialogs.
Fixes lp:1818397
https://bugs.launchpad.net/kicad/+bug/1818397
wxWidgets has several bugs that result in cell editors being closed
right after they're opened. There are two wxWidgets hacks to
partially address this: the SetInSetFocus() hack, and a slow-click
hack. We used to try and work-around these bugs ourselves for
single-click access, but this changelist moves those over to
wxWidget's slow-click hack.
Fixes: lp:1817965
* https://bugs.launchpad.net/kicad/+bug/1817965
Added checks to StrCmpNum() function in common/sting.cpp to prevent
iterating past the end of the sting. Also removed length of string
parameter since it did not seem to be used anywhere.
Fixes lp:1818157
https://bugs.launchpad.net/kicad/+bug/1818157
* fp editor: ensure axis are drawn after switching the backend
* DIALOG_PNS_SETTINGS: ensure violate DRC option is correctly enabled/disable when opening the dialog.
Violating the DRC cannot happen in shove or walk around mode as we use
the DRC to calculate these actions. The tooltip explains this as well
but we need to explicitly disable the checkbox to prevent users from
thinking that they can complete DRC violating tracks in other modes.
Introduce a shortcut method to set tab ordering and use it in
the dialogs that override the tab traversal orders:
* Eeschema sheet properties
* Pcbnew Move exact
* Pcbnew Move relative
Also set some initial focus fields in the same dialogs.
Tidy a few includes.
Fixes: lp:1816009
* https://bugs.launchpad.net/kicad/+bug/1816009
Includes Edit Text and Graphics Properties and Edit Track and Via
Properties. It's also no longer board-specific as it turns out the
board timestamp is always 0 anyway.
When moving user user units out of the global, we missed that Python
calls were using it. This re-adds a function to retrieve user units
allowing the python scripts to show users dialogs in their preferred
units.
The default hot key definition for toggle high contrast mode was 'H'.
On windows, the menu accelerator handler code was grabbing the character
so it would not appear in the filter text control. This is expected
because the windows wxWidgets code hooks this at the application level
so that once a menu accelerator key is found, all further event handling
for that key stops. Changing the hot key definition to 'Ctrl+H' resolves
the issue.
Fixes lp:1803556
https://bugs.launchpad.net/kicad/+bug/1803556
The best size was calculated from a default size.
This default size (calculated by wxWidgets) was fully broken with some texts in a few languages.
So now this best size does not use this default size.
Fixes: lp:1816315
https://bugs.launchpad.net/kicad/+bug/1816315
gal: pixel alignment for Cairo.
gal: pixel alignment for OpenGL
Cleanup of pixel alignment patches
gal/opengl: more pixel alignment patches:
- works on Retina displays now
- pixel alignment for circles
- correct 1-pixel strokes
- fixed unfinished 1-pixel line ends
GAL: Restore antialiasing options in Cairo
GAL: Fix arc drawing
Removes DrawArcSegment, which drew arcs whose edge was optionally
stroked (a feature that we did not use). Fixes Cairo arc drawing issue
where arcs were not visible in pcbnew.
gal: further cleanup
gal: removed unused shader parameter
Auto-selecting of the first grid element is performed in the footprint
editor to facility rapid editing. Rapid editing of the 3d-model fields
is not as useful and requires multiple esc-keys to cancel. This limits
the auto-edit to only the reference tab.
Fixes: lp:1815456
* https://bugs.launchpad.net/kicad/+bug/1815456
Highlight connections is meant to show the copper connections on a
board. We remove the non-copper pads from our selection when attempting
to source the net for highlighting.
Fixes: lp:1815898
* https://bugs.launchpad.net/kicad/+bug/1815898
Items that are located at the edge of or outside of integer limits will
not be shown on screen as they don't fit in the VIEW RTree. This
prevents them from being edited and can corrupt data output. Instead,
we place them at the largest value that is representable on the RTree
(INT_MAX/SQRT(2)). This allows the user to correctly utilize DRC as
well as interact with and remove the offending items.
Fixes: lp:1815642
* https://bugs.launchpad.net/kicad/+bug/1815642
The parent window was always the board edit frame,
but this is incorrect when this dialog is called from the Plot dialog.
Fixes: lp:1815530
https://bugs.launchpad.net/kicad/+bug/1815530
When adding colors to length tuner, we depend on the window background
color, which can be set by the user, resulting in an unreadable text.
This uses the HSL conversion to detect which shade it should use for the
coloring.
Also adds test cases for round-trip HSL and HSV conversion
Fixes: lp:1814530
* https://bugs.launchpad.net/kicad/+bug/1814530
Update 3D model panel on initial dialog load to reflect the current
visibility state of the 3D model.
Fix a few minor footprint properties dialog spacing issues.
Fixes lp:1815184
https://bugs.launchpad.net/kicad/+bug/1815184
Fix wxGrid column minimal widths on Windows in dialogs (just fixing the size is not enough).
WX_GRID::GetVisibleWidth(): make width bigger for labels, because they usually use a bold font.
(However, the fix is just a workaround: a better code is welcome)
Using the normal command, oval holes are "drilled" by a route command.
Some board houses do not accept this normal command.
In this case, the drill dialog allows using an other Excellon drill command (a slotted hole).
Note also some board houses do not understand this alternate command!
GTK does not handle enlarged text layouts automatically, so we need to
get the screen size before choosing the correct grid width for the
dialog
Fixes: lp:1788495
* https://bugs.launchpad.net/kicad/+bug/1788495
When doing a global edit of the tracks and vias, we need to allow for
the possibility that the track size doesn't change and that this is
explicitly allowed without DRC error.
The using the "first available" numbering option, force an
artifical linear numbering scheme starting at '1'.
Start the pad name provider at the 0'th pad index.
Also adds a few related tests and adjusts tests affected by
this change to reflect that the offset still applies.
This can be expanded in future to be more general by skipping
pad (which would allow a custom start and numbering scheme
while still avoiding duplication), but for now,
this does what the UI says and avoids string changes in 5.1rc.
Fixes: lp:1814918
* https://bugs.launchpad.net/kicad/+bug/1814918
Fixes: lp:1814917
* https://bugs.launchpad.net/kicad/+bug/1814917
* Make LIB_TABLE_BASE::GetCount() return unsigned. This is more
consistent with the behaviour of STL containers (especially the
boost::ptr_vector this is really accessing). Sadly
wxGridTableBase() forces an int, so a cast is still required
at the WX interface.
* Make LIB_TABLE_BASE::At() return a reference. First, this is more
consistent with normal STL indexing operator[]'s, and secondly, it
allows an idiomatic const index method (so you can access const
LIB_TABLE_ROWs from a const LIB_TABLE_BASE).
The motivation is to allow use of this class and LIB_TABLE_ROW
in a test program, where the LIB_TABLE_BASE is const.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
In countries using a comma as floating point separator, the --min-distance="0.0100 mm" was passed as --min-distance="0,0100 mm"
This is incorrect and broke the command line.
Fixes: lp:1814559
https://bugs.launchpad.net/kicad/+bug/1814559
Circles and Squares are handled correctly. Octagons are converted to
circles. Pad 1 is identified by the "1" string in the Eagle name.
Fixes: lp:1784126
* https://bugs.launchpad.net/kicad/+bug/1784126
Fixes and issue where forces were calculated using the current track
width even in differential placer mode where the tracks are specified by
the differential pair width.
Fixes: lp:1814480
* https://bugs.launchpad.net/kicad/+bug/1814480
When creating new lib table rows, the pointer becomes managed by the new
table through the boost::ptr_vector. The row is non-copyable, however,
so we lose the reference as soon as it goes out of scope. Creating a
clone provides a new pointer that is moved into the table on creation.
Fixes: lp:1792456
* https://bugs.launchpad.net/kicad/+bug/1792456
Choosing the drag origin should not be dependent on the snap settings in
pcbnew. Snap settings are sensible when you are designating a target
only. Additionally, when dragging a module, we do not want the
footprint's pads to be used as targets for snapping.
Fixes: lp:1814402
* https://bugs.launchpad.net/kicad/+bug/1814402
When the user cancels the footprint load, we should assume they are
canceling the placement of a new footprint. This also adds sanity check
when populating the list
Fixes: lp:1814181
* https://bugs.launchpad.net/kicad/+bug/1814181
It was a regression from 5.02 version.
The block of new footprints to place has now its reference point (the point that is on the graphic cursor) fixed.
This is the first footprint loaded from the list.
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
This is not logic specific to MODULE. Breaking it out to
kicad_string.h acheives:
* Slimming of the MODULE interface
* Enables reuse of the function
* Enables testing of the function
Also add a test under qa_common for this function.
The CONFIG_SAVE_RESTORE_WINDOW class does not need to be tied
to the array dialog, put it in common/widgets.
Also do a refactor and tidy-up of the the class, use a union for (slightly)
better type-safety and syntax (a variant would be better but that's C++17).
Also enable integral field save/restore from text boxes.
Fully initialise the CREATE_ARRAY_DIALOG_ENTRIES object,
and use these values for the dialog on first open. Currently,
the initial values aren't all initialised, and none are used, as the
valid flag is not set. This means there are poor defaults in some
fields.
Also more declarations and defintions of CREATE_ARRAY_DIALOG_ENTRIES
to the .cpp, as these do not need to be exposed in the header,
even privately.
The original item is part of the array, so give it a number
and put it in the right place (all current array tools have
a null transform for the first item, but it's not part of the
contract. For example, a circular array with an angle offset
might want to move the first point).
The numbering axis priority (h then v or v then h), and alternate
reversing are not actually numbering parameters, they are part of
the geometry of the array (the items are physically in different
orders).
So enable these options, even when numbering is disabled.
Also fix broken logic about when numbering scheme is enabled
(it still applies even if the numbering offset is fixed.)
The current module cannot be queried for existing pads as we
add them (because we never commit, until we finish the whole array).
Instead, pre-gather the names and check as we add, skipping any existing
names.
Note: this will not prevent arrays becoming "mis-ordered", but there
is not a lot we can do to prevent all possible errors.
Fixes: 1808706
* https://bugs.launchpad.net/kicad/+bug/1808706
The same principle could be used to skip existing ref-des'es on PCBs.
The geometry and numbering logic is separate to the dialog, and
can be separated for clearer logic and better testability.
Moreover, refactor it to avoid any dependency on pcbnew
classes, so it can be move to common for potential re-use in
eeschema and friends in future.
Also convert all wxPoint logic in these classes to VECTOR2I and
fix some function visibilities.
Add some unit tests of the ARRAY_OPTIONS geometry and numbering.
Snap/Grid modifier follow preferences from 05483a06c6. Brings Shift/Alt
modifiers into alignment with drawing tools. Shift modifier still
conflicts when choosing end item with the complete track click-modifier.
This will be addressed in v6 with a larger preference setting.
Snapping to item options were partially disconnected when unifying
framework. This re-attaches the options and adds the additional option
for graphical items.
Fixes: lp:1801377
* https://bugs.launchpad.net/kicad/+bug/1801377
kicad2step has a tolerance level that sets whether two points are at the
same location or not. This allows KiCad to access these levels to some
degree, permitting a looser interpretation of a closed board outline.
The selection for interactive drag uses cursor position off grid to
choose the element for dragging. We pass the same value into the start
dragging routine to choose the correct end of the element.
Fixes: lp:1813665
* https://bugs.launchpad.net/kicad/+bug/1813665
Rather than selecting an arbitrary track to snap, we select the closest
track to our point, allowing the via to be placed along the full track
length.
Fixes: lp:1813324
* https://bugs.launchpad.net/kicad/+bug/1813324
Some microwave inductor lengths cause invalid outputs
for the calculations, which causes jagged outputs.
* If the request length is such that four arcs and no straight
segments is too long
* If the length is such that an N-turn coil is too short, but
an N+1-turn coil is too long. This can happen when the coil
count is small.
This patch doesn't fix the underlying geometric issue here - fixing
the first requires a numerical method, and fixing the second probably
needs an iterative approach. Both of these could benefit from
a refactor.
However, this patch does prevent the tools producing invalid outputs,
which can sometimes be quite subtle mistakes if the "jags" are small.
Fixes: lp:1792119
* https://bugs.launchpad.net/kicad/+bug/1792119
Phoenix doesn't have the same initialization as wxpython3 and so the
namespace doesn't get the wxApp() initialized to the existing instance.
In python, this is worked around by starting a new wxApp.
Unfortunately, this appears to overwrite the existing global instance
variable. The issue _appears_ to be in Phoenix but for now we work
around it by saving and resetting the instance pointer in the main app.
The downside is that Python likely won't be able to respond to events
from C++
Fixes: lp:1809913
* https://bugs.launchpad.net/kicad/+bug/1809913
In the past, the ZONE_CONTAINER::GetPosition() member
returned a reference to a wxPoint, in accordance with the
BOARD_ITEM interface. This meant that ZONE_CONTAINER had
to reinterpret_cast a VECTOR2I (its internal position data) to wxPoint,
which was possible only due to fortunate memory layout.
This interface was changed to return wxPoints by value in
commit a4528988ca, and the normal (wxPoint) cast was used instead.
Thus, we can now also remove the dire warnings and static_asserts
used to ensure the now-unused old method was correct.
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
This separates the "newMarker" functions from the DRC class. These
are moved to a new class, DRC_MARKER_FACTORY, which is now responsible for
constructing suitable markers from BOARD_ITEMS.
The reasons for this are:
1) Allow DRC related functions to access theese functions without having
to bake these functions into the main DRC class.
2) Thereby simplify the DRC class interface
3) As DRC_MARKER is now a small class with public interfaces, it's
possible to put unit tests on these functions.
The motivation here is to allow to start to split out pieces of DRC
into separate classes.
Prior to placing the via, we check if the resulting via will pass too
close to different nets on different layers.
Fixes: lp:1718827
* https://bugs.launchpad.net/kicad/+bug/1718827
Previously, when the 3D viewer is opened, each board edition creates a 3D view refresh, that usually takes a bit of time.
Now the refresh is postponed until the 3D viewer has the focus.
When creating the zone cutout, we delete the old zone and add a new one
with each cutout. This requires resetting the source zone and clearing
our previous selection if we would like to continue using the cutout
tool on the new zone.
Fixes: lp:1812339
* https://bugs.launchpad.net/kicad/+bug/1812339
Plotting mask layers, we expand by a minimum width before performing a
boolean add of the separate regions. The boolean add has a separation
condition that includes equality. Since we are looking for the
complement of the mask, we would like the equality applied to the other
side. Removing a unit value provides the separation.
Fixes: lp:1698457
* https://bugs.launchpad.net/kicad/+bug/1698457
When loading an existing file, a missing value in the soldermask min
width value should not be interpreted as a default value but rather as a
0 value. This corrects an issue introduced by 4d709d2392
When prompting for a new footprint library, we need to treat the input
as a file for creation rather than a directory for selection.
Otherwise, users cannot specify the name of their new footprint library
independently of the existing directory names.
Fixes: lp:1812135
* https://bugs.launchpad.net/kicad/+bug/1812135
There is some odd interaction in the default copy constructor for
TOOL_EVENT using boost::optional under gcc. Avoid this by explicitly
constructing the event needed for cut
Fixes: lp:1812848
* https://bugs.launchpad.net/kicad/+bug/1812848
Seth Hillbrand
Wayne Stambaugh
jean-pierre charras
Jeff Young
Ian McInerney
Steven A. Falco
Seppe Stas
Jon Evans
Michael Kavanagh
Martin McNamara
John Beard
Tomasz Włostowski
Thomas Pointhuber