Its members can be on copper layers, but the group itself isn't on any
layer.
Also fixes a bug where we were trying to clone TRIANGULATED_POLYGON::TRI
shapes as indexable sub-shapes. (The TRI only has indexes into its
parent, so cloning it will only result in segfaults down the line.)
Also fixes a bug where we weren't including copper items inside groups
when checking footprint net ties.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15021
Normally this means surrounded by forward slashes, but we also still
allow any regular expression in a netclass match to keep from breaking
existing documents.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14944
The API is needed for wxFormBuilder, and I couldn't figure out any
way around it, but we can at least reduce the risk of someone calling
it accidentally (again).
When creating a new file lock, we need to check if the containing
directory can be written, not if the file (which may not yet exist) can
be written
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14942
WindowIds aren't actually guaranteed to be unique, and we don't
perform a dynamic_cast on the result of FindWindowById() because
of linker issues....
This is an attempt to fix KICAD-39.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14928
Note that this only works where a BOARD_COMMIT or SCHEMATIC_COMMIT is used.
(BOARD_COMMIT is used almost universally in PCBNew, but SCHEMATIC_COMMIT
has very little adoption in EEschema so far.)
When editing or viewing library symbols, the files are watched for
underlying changes. If any occur, the user is either prompted to reload
(if reloading would overwrite their current edits) or the file is
silently updated to the current version on disk.
This also sets a custom assertion handler to avoid unneeded crashes when
recieving invalid SAMBA packets and turns off assertions entirely when
running in release (non-debug) mode
Don't open-code knockout text shape generation in several different
places.
Make sure triangulated knockout text gets clearance added when
specified.
Collapse duplicated footprint text item plot routine (they're no
longer any different from plotting pcb text items).
Also fixes a bug where we didn't triangulate at all when the char
count didn't warrant the likely overhead of spinning up a
thread_pool.
And fix another bug where EDA_TEXT::GetRenderCache() wasn't using
the given font.
Also reverts using the cache for drawing-sheet text. The text
items are created from scratch from the data items each time
they're drawn, so there's never an existing cache to make use of.
Instead, we now check that the item is in the view, using a very
approximate bounding box generator (because even generating a
real bounding box shows up large in profiles).
And, lastly, fixes a bug where EndPos was never considered in
DS_DATA_ITEM::IsInsidePage().
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14822
wxSingleInstanceChecker is meant for running programs, not file locking.
This implements an RAII class for file locking that stores the lock
files next to the file being locked, allowing it to be easily found and
removed. Also includes the ability to override the lock, with
information about the original owner
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14734
[ADDED]: A panel to the schematic editor that allows quick access to all
of the items connected to the currently highlighted net.
This is an initial swag at implementing a full net navigator feature. For
now it only shows the currently highlighted net nodes. The incremental
net list advanced setting must be enabled in order to use this feature due
to performance reasons. There are still some issues with saving the panel
position which will be addressed in the future.
Initial code for serializing wxAuiPaneInfo settings to and from JSON have
be implemented.
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.
Add updating of teardrops on BOARD_COMMIT::Push().
Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
Version 7 text alignment changed subtly for stroke fonts from version 6.
Additionally, the output has been different between screen and plotting,
leading to offset text in plotted output relative to the text shown on
screen.
This introduces a fudge factor in FONT::getLinePositions to correct the
offset in the plotting output relative to v6.
This also changes the SCH_PAINTER and PCB_PAINTER to correct the
relative offsets between GAL and PLOTTER classes. The source of these
offsets is atm unclear.
Fixes https://gitlab.com/kicad/code/kicad/issues/14755
Many minor tweaks were added that changed the output of the stroke font
from v5/v6. These offsets changed the gerber output expected. This
reverts the changes to something much closer to the v6 output. It is
not pixel-perfect but gets very close on most texts.
Fixes https://gitlab.com/kicad/code/kicad/issues/14609
A sheetpath is required to correctly resolve text variables.
Depending on currentSheet is rife with bugs.
There are many places where we do *not* want to be prepending
field names to the field values, such as netlisting,
building PDF hypertext menus, etc.
Also, Find/Replace needs to work on unresolved text, as
that's what we're going to display (and if replace nuked
your variable references you wouldn't be happy).
Also simplifies the scoring algorithm so that it only
differentiates between exact-match, match-at-start and
any-match. The rest of the position-based matching
stuff is gone, as is the knowledge of the name vs the
keywords vs the description. All that is left to the
provider of the weighted search terms array.
Provides a single-point access for modifying the schematic and symbol
elements that allows chaining updates and reverting partial changes.
Standardizes the undo hierarchy between pcb and schematic editors
As this is another layer on the existing undo/redo structure, the
initial commit does not replace all undo/redo calls currently existing.
These will be handled in a series of follow-on commits
Previously, almost all connectivity updates were full updates, meaning
that the entire connectivity graph would be rebuilt each time a change
was made to the schematic. This update modifies the update to only
correct the subgraphs that are directly affected by the change.
It uses the existing connection graph to find all affected subgraphs as
well as connections to the changes based on the visible schematic.
These elements are removed from the existing connectivity graph and
marked dirty. They then have a new connectivity graph built only around
their changes. The resulting graph is merged into the original.
Currently, this ability is behind an advanced config flag
`IncrementalConnectivity` while testing.
Fixes https://gitlab.com/kicad/code/kicad/issues/10846
Fixes https://gitlab.com/kicad/code/kicad/issues/1794
Settings should be initialized on start-up. This removes the option of
lazily loading the settings from file and instead requires all settings
needed to be loaded on KiFACE start before requesting data from the
settings object
The base class constructor expected a const string, and the other
PGPROPERTY constructors do as well, so make this const.
This was also a compile error when building against wx 3.3.
The spacemouse driver, particularly on Mac, is extremely unstable and
causes crashes even when not being used. This places the interface
behind an advanced config flag to ensure that users can affirmatively
opt-in to the potential for crashes
This reverts commit 33da9b2327 and the
following commit dc08c48f33.
C++17 changed the behavior of static class member variables that are
constexpr defined. Previously this definition/declaration split was
valid for constexpr members, but after C++17 the static constexpr member
variables are automatically inlined, so the declaration is no longer
exported in some compilers (GCC 9/10/11 seem to have problems).
An alternate way of constexpr member variables is putting the
initialization in the class definition, but we can't init a COLOR4D
object when defining the COLOR4D class.
For now, revert this change until we can figure out the proper way of
architecting these colors.
This library is meant to move non-EDA items (language extensions,
library extensions, etc.) into the lowest-level of our dependency chain.
This library should never depend on anyother non-thirdparty code in the
kicad codebase.
This fixes the initialization-order fiasco in the color initialization
sequence, which was originally fixed by making COLOR4D constexpr, but
was then reintroduced when the assert was changed to wxASSERT (wxASSERT
is not compatible with constexpr).
* Add compare method to COLOR4D object.
* Add unit test to validate COLOR4D comparison method.
* Add missing color test in text attribute comparison method.
* Add unit test for text attribute object.
* Remove unnecessary headers from text attribute header.
* Move text attribute code into separate source file.
Don't assume the dialog is mode-less and call Destroy() from within a
dialog method. This will most assuredly crash if the dialog is shown
modally or quasi-modally.
Don't leak memory for mode-less dialogs created on the stack. Make sure
when the parent frame window is closed that all mode-less dialog memory
is cleaned up. Dialogs are not child windows like controls and toolbars
so their memory does not automatically get cleaned up when the parent
window is destroyed.
Do not directly access frame parent window's pointer in dialog destructors.
Apparently the tear down order when destroying mode-less dialogs is not
guaranteed so the parent window may get deleted before the dialog causing
a crash when accessing the parent window pointer from the dialog dtor.
Do not close mode-less dialogs in the parent frame's destructor. This
doesn't guarantee that the dialog(s) will be destroyed before the parent
but it may reduce some careless mode-less dialog event handling in the
future.
Moves forced-transparency setting down into VIEW_ITEM so that it can
be used to place forced-transparent objects in a different target.
This keeps EnableDepthTest() from equalizing the alpha values between
the two symbols (or two footprints).
The wxComboBox drops nicely from the top of the screen, showing the full
element list, opposed to the choice widget that centers the selection
and places the list off the top of the screen if there are many
elements. This was broke for MacOS until wx3.2
Fixes https://gitlab.com/kicad/code/kicad/issues/1866
- Avoid repetition and errors from typos
- Allow simple changes
- Simpler data type handling, the constants are wxString
(Cherry-picked from f135881bd6 in 7.0)
Old PLOTTER::Text is not (yet) removed, but it use negative text size
to mirrored text, which is not really compatible with some plotters (especially PDF).
Using TEXT_ATTRIBUTES is much easy and much better,
so PLOTTER::PlotText() is added.
Note: "old" PLOTTER::Text() is not removed yet.
The overbar function in outline fonts recursively calls the text
function which already owns the lock. To avoid this, we have an
unlocked variant that is wrapped by the exposed text function
Fixes https://gitlab.com/kicad/code/kicad/issues/14015
This is needed so Python scripts can get built-in colors using the
SETTINGS_MANAGER.GetColorSettings() member.
Otherwise calling it with a built-in name crashes.
(cherry picked from commit aee6d9d01c)
Some classes had been originally designed to be usable separate from wx,
but over time our uses of the classes have become entertwined with wx
features (e.g. colors), and various changes have also leaked wx into the
classes unguarded. So just remove the option to hide wx in those classes
to simplify the code.
ttf fonts can declare multiple language names. Many by default opt to just declare one and not tag it any particular language.
However, there are CJK languages that typically leverage this function the most. They'll tag both a "en" and a cjk lang family name in CJK characters.
To be as user friendly as possible, we need to display said fonts in the CJK languages if KiCad to set to such a locale.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14011
This adds Reset() method to KIFACE to reload global libs stored in
global static vars.
Also refactors some lib reload code in various frames to have
common MAIL_RELOAD_LIB handler.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12500
sentry KICAD-B1
https://freetype.org/freetype2/docs/reference/ft2-base_interface.html
[Since 2.5.6] In multi-threaded applications it is easiest to use one FT_Library object per thread.
In case this is too cumbersome, a single FT_Library object across threads is possible also, as long as a mutex lock is used around FT_New_Face and FT_Done_Face.
Also fixes a bug so that voltages, currents and power dissipations are
only probed if the flag is set -- this keeps ngspice from throwing an
error if you probe something twice (for instance, if you have .probe
commands in text and turn off the auto-probing).
This makes it clearer that the overrides are not inverses of each
other -- one overrides the flashing state and the other overrides
the connection state (to other zones, not to everything).
Also fixes a bug where we were failing to check the force-no-connect
for pads.
If the font face doesn't include a Bold or Italic version, we still want
to display the font as bold/italic, so we fake it with freetype.
This also prevents recurring error messages where the outline font warns
about "substitutes" within the same font family.
Also allows variants on the weight descriptor to be used without
throwing a substitution warning
Fixes https://gitlab.com/kicad/code/kicad/issues/13654
Fixes#10926
Contains the following changes:
- Adds a new ERC_SCH_PIN_CONTEXT class which is used to provide deterministic
comparison between items causing ERC violations (e.g. pins) when associated
with a SCH_SHEET_PATH context.
- Adds association of SCH_SHEET_PATHs for ERC_ITEMs and the sub-schematic items
which caused an ERC violation. This allows correct display of markers on the
sheets of interest only, and allows correct naming resolution and cross-probing
from the ERC dialog.
- Adds a new ERC_TREE_MODEL class, derived from RC_TREE_MODEL, which correctly
resolves component references across heirarchical sheets using the associated
SCH_SHEET_PATHs. This allows sheet-specific component references to be displayed
correctly in the ERC results tree.
- Updates SCH_MARKER to only draw sheet-specific markers on the sheet causing
an ERC violation.
- Increments the schematic file version.
- When loading a schematic with legacy ERC exclusions, discards those of type
ERCE_PIN_TO_PIN_WARNING, ERCE_PIN_TO_PIN_ERROR, ERCE_HIERACHICAL_LABEL, and
ERCE_DIFFERENT_UNIT_NET as there is no safe way to automatically infer the
information which is now stored with these exclusions (sheet paths for error
location and related items). Requiring users to (once) re-add exclusions is
preferable to silently incorrectly matching new ERC issues to legacy exclusions.
If KiCad does not detect an environmental variable set for the old
library table variables AND the library table being opened references
the unset env var, we will dynamically update the env var to the new
value
Fixes https://gitlab.com/kicad/code/kicad/issues/13464
The pressure relief valve was not useful for common work patterns as it
forced the recalculation on many common actions such as bus expansion.
This caused it to actually feel slower than with the pressure relief
valve off.
For most schematics, realtime is now fast enough to not need the valve
and for those that are extremely complex, removing the valve helps this
run more predictably
EDA_ITEMs are responsible for giving their parent a crack at it if
they failed to resolve it. This recurses all the way up to the schematic/
board, and then to the project.
Cross-reference handling is also move to the EDA_ITEMs. It must be done
before bubbling up so that we don't end up in loops. (The aDepth parameter
will break the loop, but without having done anything useful.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
In particular, record which children caused a parent footprint to be
added to the commit so we can determine if they have intersecting
bounding boxes and/or layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13512
We block events when a modal window is active. But detecting when the
modal window is closed is harder on GTK than just counting modal closes
because the modal flag can sometimes be unset before the wxEVT_SHOW
event fires. Instead, we track the stack of modal windows opened and
close the window and subsequent windows when the object pointer matches
Fixes https://gitlab.com/kicad/code/kicad/issues/13372
We shouldn't include the kicad_build_info.h outside of the wrapper
build_info.h. Also adds an error directive to prevent re-introduction
of define dependencies
Also improves some terminology for english-speakers.
Also substitues [] vector access (which creates empty elements) over
at() (which throws if the item is not found).
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
The search field on the Symbol Editor is focused when its window
is first opened. Similar behavior has been implemented in the search
field of the Footprint Editor with this change.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13100
As of wxWidgets 3.2, the wxWidgets event handler runs code after the
the client event handler that depends on the menu still existing.
Because there are potentially many paths to call ReCreateMenuBar from
within a menu event handler, let's just wrap this action in a CallAfter
to make sure it happens after the wx handler call completes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13149
Check for already loaded schematics in the current sheet path as well
as the current project root sheet path to prevent multiple loads of
shared schematic. This bug was causing shared sheets to be loaded more
than once which caused instance data to get separated by each copy rather
than saved in one copy of the schematic which would result in all instance
data being lost except the last saved copy of the schematic. This bug has
been around forever and may be the cause of some unexplained schematic
instance data corruption issues. This bug does not apply when opening
the full project.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11076
Some of these are due to moving to wxWidgets 3.2, but I'm not sure
all of them are. In particular, the need for CallAfter() in the
search pane's selection handler is probably just a wxWidgets bug on
Mac (the control lies about the current selection inside the event
handler).
Also sets better column widths in the search pane.
Also removes a bunch of std::string stuff from the file handling in the
simulator. All our file handling, env variable expansion, project path,
etc. stuff is wxString based, and jumping through std::string in between
just makes it more complex and increases the potential bug surface.
Also fixes a bug where you'd get two error messages when a spice model
library wasn't found.
Also fixes a bug where you'd get a spice model library not found error
when the text field was empty.
Also fixes a bug where we'd try to absolutize a path starting with an
unresolved text or environment variable. If the path starts with a
variable it's probably absolute, and tacking on the project path in the
error message just obfuscates things.
Fixes https://gitlab.com/kicad/code/kicad/issues/13082
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
The hard coded value was too small for certain calculations. Better to
have a configurable value that is initially set to our error level to
allow for deviations that don't meet the visibility test for spikes.
These have become more apparent with Clipper2
The properties editors are global but the frame that they reference is
not static, so we need to be able to update the frame reference when
restarting pcb editor from the main window. This updates the frame,
being careful to remove the signalling when closing pcbnew but keeping
the instance of the editor in place.
Fixes https://gitlab.com/kicad/code/kicad/issues/12297
The modifier keys on the keyboard control the motion spacing (Ctrl) and
shouldn't be confused with the modifier key used to disable grid
snapping when moving with the mouse (also Ctrl)
Fixes https://gitlab.com/kicad/code/kicad/issues/13027
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper. The changes should be
mostly transparent.
Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.
Additionally, the inflation options are slightly different. We cannot
choose the fallback miter. The fallback miter is always square. This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.
Lastly, we currently utilize the 64-bit integer coordinates for
calculations. This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system. This may not be the case for older
systems, particularly 32-bit systems.
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
Oh dear, there was a bunch going on here. Firstly the move from int
to long long int for ValueFromString() means that we were no longer
catching overflows (as we were C-style casting it back to int in many
places). But even when the overflow is caught, it would run in to
wxWidgets' empty string bug while trying to log it.
Fixes https://gitlab.com/kicad/code/kicad/issues/12577
Keeping a function reference is only in scope when the call is
immediately executed, not when it enters its own event loop.
This commit also excises one more onUpdateUI call as it is not needed
Fixes https://gitlab.com/kicad/code/kicad/issues/12395
Using arc angles to plot an arc is really error prone due to different
options between plotters, and angles defined in Kicad, using this version of
arc plotting from Kicad is no longer allowed in Kicad code.
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
1) Push a VAR onto the stack, not a resolved value
2) Don't collapse a PCB_LAYER_VALUE to a VALUE during processing
3) Make sure we run overloaded operators from the correct side
Fixes https://gitlab.com/kicad/code/kicad/issues/12437
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
We used to use the bold setting, but since PCBNew allows you to
directly define the width you end up with settings in between normal
and bold that get clamped to the normal max.
Fixes https://gitlab.com/kicad/code/kicad/issues/12367
CHANGED: Symbol chooser search now considers custom symbol fields
Visible columns can be controlled in database libraries.
In standard KiCad libraries, we show columns for all custom fields for now.
Customizable column visibility will be added in the future.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11946
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
Pinned packages don't affect available update notification and will not
be updated with "Update All" button. Manual update is still possible but
will trigger a confirmation dialog.
Since single-row queries are performed rapid-fire during certain actions like
stepping through the symbol browser, there is high value in caching them for
a small amount of time. The default cache parameters will keep results for
10 seconds, which errs on the side of getting fresh data from the database
on most user interactions.
Since EDA_TEXT is a base class, we can just force the child classes to pass the correct iu scaled size
ALLOW_BOLD_THICKNESS removed because it's a pre-custom font holdover
Mike Williams
Jeff Young
Jon Evans
Alex Shvartzkop
Marek Roszko
Seth Hillbrand
Roberto Fernandez Bautista
jean-pierre charras
Wayne Stambaugh
Ian McInerney
qu1ck
Ian McInerney
Nimish Telang
Salvador E. Tropea
Johannes Pfister
kliment
JamesJCode
Gary Kim
Tanay Gupta
Mikolaj Wielgus
Bevan Weiss
Tomasz Wlostowski
Scott Hanson
lulu731
aris-kimi