Eeschema (also Libedit and Libview) starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* make 2 bitmaps more visible.
* fix incorrect screen redraw when rotating a component.
* netlist : the pcbnew advanced format can be now stored (persistant option) in project config.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
* Move SCH_ITEM::Place() code into SCH_EDIT_FRAME so schematic item
objects no longer have any knowledge of the schematic frame window
or undo/redo containers.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* Add check box and flag to ignore replacing the component reference
designator field.
* Fix a resizing bug when switching between the find and replace modes of
the find/replace dialog.
* Fix replace component reference designator field bug.
* Force rebuild of search list when schematic is modified and the replace
dialog is closed.
* Prevent finding the next item when the find/replace dialog is closed.
* Respect warp mouse pointer setting when closing find/replace dialog.
* Fix duplicate mnemonic control accelerator keys in find/replace dialog.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
are hidden during find and replace.
* Replace Eeschema find code with a collector based implementation.
* Fixed a search bug when all subsequent searches of an item would ignore
the remaining valid child items when an item had more than one child
item that matched the search criteria.
* Add SCH_FIND_COLLECTOR class to find all items that meet the specified
search criteria.
* Add SCH_FIND_COLLECT0R_DATA to keep track of information for all matching
items.
* Use collector to iterate over the list of items that match the search
criteria rather than trying to start at the last matched item.
* Remove unused searching methods from sheet path and sheet path list
objects.
* Add replace and replace all functionality to Eeschema find dialog.
* Push matching methods down to EDA_ITEM class so they can be used by
other derived objects.
* Add method to EDA_ITEM to test if item supports replacing.
* Add flag to find/replace data to support replace feature.
* Disable wild card matching check box when dialog is in replace mode as
wild card replacement is not supported at this time.
* The usual Doxygen comment and coding policy fixes.
* Fix bug in hierarchical searches using sheet path pointers which are
destroyed on every search. Use human readable path as last sheet found
in test to prevent comparison of deleted pointers.
* Fix a bug in SCH_COMPONENT::Matches() that would prevent searching for
pins if the search all fields flags was not set.
* Fix a bug in SCH_COMPONENT::Matches() to use the sheet path to perform
the comparison to the correct reference designator and unit number.
* Fix wrapping in sheet path and sheet path list MatchNextItem methods.
* Push search methods down to EDA_ITEM object so advanced searching can
be performed on all items derived from EDA_ITEM.
* Add virtual method to EDA_ITEM object to test if item supports replacing
text.
* Replace switch statement magic numbers in Eeschema socket connection code
with Pcbnew for improved readability.
* Create command event handler for orienting schematic items and block.
* Remove redundant orient item and block command handler code and IDs.
* Remove redundant cancel current command event table entry.
* Remove unnecessary schematic bitmap object virtual functions.
* Set path when saving schematic sheet files to prevent assertion in
updated path and file write permission test function.
* Restore directory and file name write permission test function to it's
previous behavior to prevent unexpected save results.
* Add an assertion to verify the path is not empty to directory and file
write permission test function.
* Improve documentation for path and file write permission test function.
* Fix Doxygen link warnings.
* Create command event handler for draggining all schematic items.
* Remove redundant delete item command handler code.
* Remove unused close current tool command ID from process special
functions event handler.
* Add a rotate event handler to schematic frame object.
* Remove unique rotate item command IDs.
* Use process event instead of post event to eliminate the need to clean
up the command event client object from the heap.
* Unify find next item and next DRC error hot key commands.
* Unify move and rotate hot keys commands.
* Remove external dependency for adding suffix to reference designator
fields.
* Make schematic field get and set position methods transform coordinates
relative to the parent component object that owns them.
* Make base text class get text method virtual so derived classes can
change the base string according to their individual requirements.
* Fix a problem with default place schematic item add in last commit.
* Factor test for auto save file into base frame class.
* Added auto save feature to Eeschema for saving schematics, addresses
launchpad question 173631.
* Add auto save interval control to Eeschema options dialog.
* Fix problem with subsequent auto saves in last commit.
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
* Add general purpose user write permission test function to base
window class.
* Check user write permissions before saving project, schematic and
library files.
* Remove displaying file dialog every time the project file is saved.
* Display absolute paths for non-root sheet file in title bar.
* Remove redundant command table entry from schematic editor.
* Remove unused variables to fix GCC 4.6 warnings.
* The usual Doxygen comment and coding style policy fixes.
* Add in help menu a direct link to the new doc Getting_Started_in_KiCad.pdf, written by contributors (useful for beginners)
* Fix other very minor issues in CvPcb.
* Update howto doc about translation
* Move code from function ClearProjectDrawList() into SCH_SCREEN object
Clear() method.
* Delete eeschema/delsheet.cpp as none of the code in it is ever called.
* Move global spice and net list command line variables into SCH_EDIT_FRAME
object as priviate members and provide access methods.
* Remove unnecessary header includes from eeschema/sheet.cpp.
* Minor coding policy fixes.
* Create library collector class.
* Add clarification menu to library editor when multiple items are found
at the current position.
* Add get clarification menu text to all objects derived from LIB_ITEM.
* Add get menu bitmap for all objects derived from LIB_ITEM.
* Improve LIB_PIN bounding box calculation.
* Rename LIB_ITEM::DoGenCopy to doClone to match behavior defined in base
class EDA_ITEM.
* Minor class renaming for improved code consistency.
* Added less than operator to EDA_ITEM.
Also fix a minor zoom page issue in Libedit.
wxMSW, version 2.8.x must be patched.
Some zoom values smaller than 3 to 5 create artifacts on screen, mainly values < 1.
(corresponding to draw scale factor > 1 )
* see http://trac.wxwidgets.org/ticket/9554
This is fixed in version 2.9.x
Workaround: ( that is not a full fix, but remaining artifacts are acceptable )
edit file edit file <wxWidgets>/src/msw/dc.cpp
>> search for line
static const int VIEWPORT_EXTENT = 1000;
>> and replace by
static const int VIEWPORT_EXTENT = 10000;
CMake: add definition KICAD_TESTING_VERSION and KICAD_STABLE_VERSION.
One of these 2 options *must* be now defined (i.e. run cmake with option -DKICAD_STABLE_VERSION or -DKICAD_TESTING_VERSION
Stable and testing branches should be more easier to maintain.
* Component moves can now be undone do to incorrect virtual method declaration
in schematic component object.
* Undoing a field move now redraws the undone field properly.
* Fix bug when after aborting a field move kept displaying context menu
field items.
* Removed unused current field member variable and access methods from the
schematic edit frame object.
* Update component move code to comply with coding policy.
* Move undo item copy global variable into schematic editor frame object
member variable.
* Add helper methods for accessing the undo item copy member variable.
* Fix undetected bug when changing a text type.
* Added an exchange command to the undo/redo base class for handling undoing
a changed item type which cannot be undone by swapping out the variables.
* Revert change to common/hotkeys_basic.cpp that broke hot key behavior.
* Lots of coding policy changes while making the changes above.
* Add item clarification context menu to EESchema when multiple unresolved
items are found at the current cross hair position.
* Add collector class SCH_COLLECTOR for supporting multiple item hit testing.
* Removed bit wise masked filtering from schematic item hit testing.
* Removed all old hit testing functions and methods scattered about the
EESchema source code.
* Move terminal point test function into SCH_SCREEN object.
* Fixed bug in terminal point test when terminating a bus to a label.
* Define the < operator for sorting schematic items.
* Add area calculation method to EDA_Rect item.
* Add method for returning an item's bitmap for menu display purposes.
* Add method for returning an item's menu text for menu display purposes.
* Changed EDA_ITEMS container from boost::ptr_vector to std::vector.
* Factor coordinate string conversion code from EDA_DRAW_FRAME to function
CoordinateToString().
* Factor change schematic component orientation code out of switch statement
into separate function.
* Remove redundant command events from schematic editor hot key handler.
* Change EDA_ITEM set flag function to set flag bits using logical or
instead of assignment.
* Add clear flag function to EDA_ITEM to clear flag bit using inverted
logical and.
* Factor change schematic text type code out of switch statement into
a single function call.
* Schematic text orientation function renaming improvements.
* Lots of small coding policy changes to updated files.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Schematic editor cancel current tool command now use a single command
ID that is used everywhere the event is generated.
* Moved cancel current tool code from Process_Special_Functions to a
separate event handler.
* Add idle check method to block select object.
* Add block active check to base screen object.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
* Use Boost pointer container for sheet hierarchy object.
* Add test for modification in sheet hierarchy list object.
* Add method to clear modification flag in sheet hierarchy list object.
* Improve Doxygen comments for sheet hierarchy list object.
* Remove redundant definitions in prototypes header file.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
* Rename sch_item files to sch_junction.
* Make global variable g_ItemToRepeat a private member of SCH_EDIT_FRAME
object.
* Encapsulate SCH_SCREEN reference count member.
* Move schematic select block from global variable to SCH_EDIT_FRAME.
* Remove redundant schematic drawing code for eeredraw.cpp.
* Move block select code into SCH_SCREEN object.
* Simpilify block item select code.
* Fix bug in SCH_LINE selection state test.
* Add test to schematic objects for connectability.
* Make copy block items function a private method in SCH_EDIT_FRAME.
* Fix bug that prevented component from being replaced in library when
the component root name was changed.
* Fix drawing bug when changing text or field item string while move in
progress.
* Fix drawing bug when rotating text item while move in progress.
* Prevent undo or redo when editing a component draw item.
* Fix assert bug when replacing component in library when the component
root name was changed.
* Fix bug in field editor caused by new root alias implementation that
prevented any field from being changed.
* Fix minor spacing issues with EESchema find dialog.
* Deprecate remaining internal linked list code from component library
objects.
* Rename pin object files to match new library object file naming
scheme.
* Move LIB_TEXT object definition into it's own header file.
* Use C++ map in component library instead of boost::ptr_vector.
* Drop Boost pointer containers for standard C++ containers.
* Moved duplicate name user interface elements from library object to
library editor.
* Added code to support direct addition and replacement of component
alias objects into libraries.
* Removed temporary strings used to add and remove alias objects.
* Libraries only store alias objects, components now accessed thru alias.
* Simplify library API for adding, removing, and replacing components.
* Updated edit component in library dialog and library editor to reflect
component library object changes.
* Fixed bug in library viewer when displaying alias name.
* Made a few header files compile stand alone per the new coding policy.
* Remove some dead code and the usual code formatting fixes.
inches and mm, the industry is crazy enough to force us with mixed
design. For example I routinely use imperial units for track size and
clearance, but drilling is strictly a metric issue...
So I added a little parser to recognize a suffix specification in the
unit text boxes... so you can put in things like:
1in (1 inch)
1" (idem)
25th (25 thou)
25mi (25 mils, the same)
6mm (6 mm, obviously)
The rules are: spaces between the number and the unit are accepted, only
the first two letters are significant.
As a bonus, it also recognize the period (.) as a decimal point
substituting it with the correct locale character (there was a wishlist
for it, IIRC). Most useful for number pad fans :D
* Fix a minor problem with wxFileDialog to open a file that no longer
exists in PCBNew.
* Make GerbView open file behavior the same as PCBNew.
* Remove redundant PCB file wild card definition.
* Add open file refactor task to the todo list.
* Fix some minor code formatting issues.
* Replaced find dialog with wxFormBuilder version.
* New find dialog is modeless, supports more advanced search features,
remembers it's last position, size, search history, and search settings,
and implements initial support for replacing.
* Added Shift+F5 hot key to search for next DRC marker. F5 now just
repeats previous search.
* Minor cosmetic enhancements to label edit dialog.
* Remove tab from grid size text printf to fix toolbar grid combobox
display in wxGTK.
* Updated my TODO list items.
* Implement code to allow wxDC to handle coordinate conversions between
device and drawing units.
* Add build settings to enable wxGCDC for wxGraphicsContext testing.
* Remove wxAUI conditional build cruft as it is now required to build
Kicad.
* Fix scroll increment size regression to prevent jumping around the
zoom center position.
* Add find GDI+ cmake module for building on WXMSW when wxGraphicsContext
is enabled.
* Fix debug asserts when passing NULL pointers to wxAuiPaneInfo.
* Fix Kicad main window sash sizer bug when using wxAui.
* Remove specctra_test from Visual Studio builds to prevent build errors.
* Add WIN32 to layer widget test so it will build properly on Visual Studio.
* Fixed compiler conversion warnings in PCBNew.
* Fixed worksheet print scaling in PCBNew.
* Minor code renaming.
* Replace schematic editor options dialog with wxFormBuilder version.
* Fix ugly wxGTK sizer hack in pin properties dialog.
* Set dialog minimum size after initial fit to prevent dialog controls
from being obscured when resizing.
* Move bitmaps in annotate dialog for cleaner control alignment.
* Complete comment translation for all EESchema source files.
* Complete comment translation for all 3D viewer source files.
* Rename class class_hierarchical_PIN_sheet to SCH_SHEET_PIN.
* Rename class DrawSheetStruct to SCH_SHEET.
* Tool tip capitalization fixes.
* Uncrustify and spell check comments and strings in all modified source
files.
* Component library objects renamed for improved readability.
* Fields now move when selected in library editor.
* Add copy constructor to all library draw and library component objects.
* Added copy constructor to EDA_BaseStruct.
* Delete base screen in WinEDA_DrawFrame destructor to prevent potential memory leak.
* Fixed memory access bug when replacing and adding a component to library.
* Moved library component block manipulation code into component object.
* Removed all of the global variables used by the library editor main window object.
* The usual code cleaning and refactoring.
* Split out application specific command IDs to prevent unnecessary rebuilding.
* Eliminate duplicate menu and tool bar command IDs.
* Split component library editor and viewer definitions to separate header files.
* More component library and document file merge code.
* A bunch of minor string readability and consistency fixes.
* Added modified version of FindwxWidgets.cmake to prevent manifest build and link errors
with VC8.
* Fixed ambiguous math function ( sqrt, atan, cos, etc. ) call errors when building
with MSVC.
* Moved bitmap copy bitmap source file destination to the build path to prevent source
tree pollution and library rebuilds when building on different platforms.
* Created separate SVN version header.
* Add true config.h for platform dependency checks.
* Add dependency check cmake module.
* Remove some leftover hand crafted make files.
* Remove non-cmake build instructions from COMPILING.txt.
* Fix split _() strings causing Visual C++ compiler error.
* Fix lots of compiler warnings.
* Change project file parameter container from wxArray to boost::vector_ptr.
* Removed lots of redundant header definitions.
* Fixed green_xpm redefinition in ercgreen.xpm.
* Remove some dead code and unnecessary class methods.
* All: remove all remaining occurrences of g_DialogFont and dialog font menu handers.
* All: remove all remaining non-standard fonts and button text colors from common dialogs.
* PCBNew: remove all non-standard fonts and button text colors from dialogs.
* PCBNew: update project library and path dialog to match changes to CVPCB version.
* EESchema: update project library and path dialog to match changes to CVPCB version.
* EESchema: save vertical/horizontal line direction setting between sessions.
* All - add wxList implementation for dynamic declaration of application settings.
* EESchema: remove non-standard fonts and dialog button text colors from all UI controls.
* EESchema: update project file and application settings from static to dynamic method.
* EESchema: save and restore show hidden pins state between sessions.
* EESchema: global variable reductions.
* EESchema: use EVT_UPDATE_UI instead of SetToolbars() to set control states.
* EESchema: remove unused DialogBlocks BOM dialog project file.
* GerbView: remove non-standard fonts and dialog button text colors from all UI controls.
* GerbView: fix infinite loop when parsing RS274X aperture definitions with whitespace.
* GerbView: add file name to export to PCBNew select layer dialog.
jean-pierre charras
Lorenzo Marcantonio
Wayne Stambaugh
Alexander Zakamaldin
Dick Hollenbeck
Hauptmech
Andrey Fedorushkov
Jerry Jacobs
viknn