Commit Graph

330 Commits

Author SHA1 Message Date
Jeff Young d1006138fd ADDED holeWallPlatingThickness to AdvancedCfg.
Used for zone filling and DRC hole collision testing.  Allows us to
calculate the actual hole size from the finish hole size.

Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
Jeff Young 8609180406 Add all non-shape properties to dummy hole pad.
This is required in case there are DRC Rules that are matching against
the properties.  It also allows any local clearance overrides to take
effect.

Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 15:03:09 +01:00
Jeff Young 996ea4d5f9 Performance improvements for zone filling.
Remove extraneous simplify calls.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-25 20:10:14 +01:00
Jeff Young 6d12859c14 Give up on trying to get Clipper's miter strategies to work.
Instead, make sure we remove the clearance holes and outline at
the end so that copper isn't allowed to "spill" into areas it
shouldn't be in.

Also fixes a bug where the Advance Cfg defaults weren't getting
loaded when the file didn't exist.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812

Fixes https://gitlab.com/kicad/code/kicad/issues/5306
2020-08-25 19:07:37 +01:00
Jeff Young a407befa4c Fix breakage from layer change.
We have to be careful about processing edges on the Edge_Cuts even
when we're talking about a zone on some other layer.
2020-08-13 00:18:09 +01:00
Jeff Young 393bb0fd83 Fix assert where geometry routine wasn't ready to handle layers.
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
Jeff Young 463100d67f Remove a long-standing hack to keep divots out of adjacent zones.
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
Jeff Young a6d44676b3 Move commit handling outside of ZoneFiller.
This allows us to rever the commit on a cancel.

Fixes https://gitlab.com/kicad/code/kicad/issues/5107
2020-08-12 22:20:07 +01:00
Seth Hillbrand 5fc6b74c89 ADDED: Remove unused pads
This option removes copper layers from pads and vias where they are not
connected to other board elements.  This allows the inner layers to be
more closely routed if the via landing pad is not needed.

Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
Jeff Young e5b50d90a7 Update DRC rules to new layer and disallow grammars.
Also adds support for hooking rules up to named zones.

Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
Jeff Young e14bbc7d83 Fix auto-added include. 2020-08-07 17:10:12 +01:00
Jeff Young 00e77d1ba4 Implement pad & via aprons for hatched zones.
Fixes https://gitlab.com/kicad/code/kicad/issues/2519
2020-08-07 15:15:43 +01:00
Jeff Young c30739dff3 Implement a more aggressive zone-fill-cancel.
We now unfill all zones so that the user can clearly see that
things are not in a "finished" state.

Fixes https://gitlab.com/kicad/code/kicad/issues/5035
2020-08-05 16:51:58 +01:00
Jeff Young 3cf5db3ce5 Allow cancelling of zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/5035
2020-08-04 19:53:35 +01:00
Seth Hillbrand 6900f04ee0 Change Zone extra clearance magic number to AC
Rather than keeping a magic number in the code, we set the default in
the advanced config setting and allow users/developers to modify it.
2020-07-26 07:20:24 -07:00
Jon Evans f8bfb2bc16 Fix several issues with multilayer zones
- Properly refill if layer set is modified
- Fix some threading issues with island removal
- Fix copy constructor

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4765
2020-07-01 20:51:44 -04:00
jean-pierre charras 8d18f289c7 remove a message printed only for debug/test. 2020-07-01 18:52:42 +02:00
Jon Evans 44f3cdb31e Fix a few issues with zone islands 2020-06-29 12:16:37 -04:00
Seth Hillbrand 224b41e8b1 Fix a threading segfault when filling zones
The shape cache gets reset by the zone fill algorithm.  This needs to be
cleaned before multiple threads are created and cannot be modified when
threading.

Fixes https://gitlab.com/kicad/code/kicad/issues/4723
2020-06-28 11:12:31 -07:00
Jon Evans 1d5e4f86af ADDED: Copper zone island removal is now configurable
ADDED: Zones and keepouts can now be named (for DRC)

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4392
2020-06-28 09:09:38 -04:00
Jon Evans 0d4ee39f75 CHANGED: Copper zones can be on more than one layer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
Jeff Young d01b29ab37 Cleanup pad geometry handling.
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.

This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
Jeff Young 39ec63c4e9 Fix some inconsistencies in clearance priorities.
Fixes https://gitlab.com/kicad/code/kicad/issues/4555
2020-05-29 13:41:45 +01:00
Jeff Young cec857c0f4 Complete hookup of zone filler to new clearance engine. 2020-05-18 19:20:46 +01:00
Jeff Young d3f017d825 DRC rules parser and engine.
Fixes https://gitlab.com/kicad/code/kicad/issues/2182

Fixes https://gitlab.com/kicad/code/kicad/issues/2116

Fixes https://gitlab.com/kicad/code/kicad/issues/1958

Fixes https://gitlab.com/kicad/code/kicad/issues/1965
2020-05-16 15:53:05 +01:00
Seth Hillbrand 8c19b4b6ae pcbnew: Adding arcs to PNS
This is allows ARCs in tracks to be synchronized with
the PNS router.  Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
jean-pierre charras 39c2c4e13b Zone filler: pads non connected in zone option: use same algo as the 5.1 branch
to calculate thermal clearance (antipad size) for pads having the same netcode
as the zone, the net clearance has no meaning
(net clearance between object of the same net is 0)
and the zone_clearance can be set to 0 (i.e. use the netclass clearance).
Therefore use the antipad clearance (thermal clearance) or the zone_clearance if bigger.
2020-02-17 18:21:49 +01:00
Ian McInerney 6b8d81e95d Add zone area to message panel
ADDED: Area of zone fill is displayed in the message panel

Fixes https://gitlab.com/kicad/code/kicad/issues/2412
2020-02-05 09:44:53 +00:00
jean-pierre charras 48ae188b15 Zone filler: fix a few issues, in Smoothed Polygons mode.
- Fix non optimal shape of solid polygons after inflate transform.
- Add a small extra clearance ((2 microns) when creating clearance areas
(especially, convert arc to polygons create small differences)
- Add a small threshold (1 micron) in drc test distances to avoid false positives
- fix a minor issue in TransformOvalToPolygon that created sometimes a not perfect shape

Fixes #3812
https://gitlab.com/kicad/code/kicad/issues/3812
2020-01-26 18:19:24 +01:00
Jeff Young d24bd5c832 Fix a couple of Coverity issues. 2020-01-12 21:07:41 +00:00
Ian McInerney 13b6028e1b Refactor all math into a new kimath library
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions

This is part of cleaning the build system for #1906.
2020-01-07 17:12:59 +00:00
Mark Roszko 19ceb11ae7 Change more enums over to scoped enums 2019-12-28 00:55:11 +00:00
Mark Roszko 11ff16be4e Switch to scoped enums 2019-12-20 14:11:39 +00:00
jean-pierre charras 02977aacfc Pcbnew: fix incorrect rotation angle unit when building thermal spokes
The new Rotate function uses radians, not deci-degrees.

Fixes #3668 | https://gitlab.com/kicad/code/kicad/issues/3668
2019-12-13 17:41:20 +01:00
Seth Hillbrand c4d853c1e8 SHAPE_LINE_CHAIN: Remove element access
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines.  To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
2019-12-12 13:54:48 +00:00
jean-pierre charras 4a75cc586c Zone filler: do not create stubs in thermal reliefs when not possible.
pad size is sometimes smaller than the zone minimal width.
So, to avoid strange and incorrect results, do not create the stubs in
thermal relief when the pad size is smaller than the zone minimal width.
2019-12-04 13:23:09 +01:00
Ross Schlaikjer 64a42ffa35 Add keepout in footprints: Starting point. 2019-10-29 11:24:30 +01:00
jean-pierre charras a18d3cca6e Pcbnew, zone filler: Ensure hatch pattern thickness bigger than zone minimal width (one micron bigger).
This margin is mandatory to avoid incorrect polygons in Gerber files:
due to the fact Gerber units can be 10 nm (and Gerbview internal unit is also 10nm), valid polygons
can be converted to non valid (self intersecting for instance) by coordinates truncation.
This is a known problem in Gerber files (not specific to Gerber format)

Fixes: lp:1847737
https://bugs.launchpad.net/kicad/+bug/1847737
2019-10-12 11:12:27 +02:00
jean-pierre charras bd34348068 Pcbnew: allows using filled polygons in zones with no outline thickness.
This option was only available if advanced config "ForceThickZones" was set.
2019-09-06 16:13:41 +02:00
Jeff Young a25368cc6b Improve spelling.
The groundwork here is thanks to kunda1.

Fixes: lp:1831510
* https://bugs.launchpad.net/kicad/+bug/1831510
2019-08-20 19:14:05 +01:00
jean-pierre charras d208447cba Zone filler: clamp thermal stub width to the pad minimal size.
Setting stub width to a ridiculous large value (for instance 100 times the pad size) creates strange and broken shapes,
and obviously stubs cannot be built.
Ensure also the thermal shape is inside the zone boundary (because the algo adds areas this was previously possible)

Fixes: lp:1837559
https://bugs.launchpad.net/kicad/+bug/1837559
2019-07-23 20:32:38 +02:00
jean-pierre charras 164d40f235 Zone filled, non copper zones: fix missing inflate for non stroked solid areas. 2019-07-17 13:24:21 +02:00
Jeff Young 2c5876ee8c Add more control over how corners are handled when inflating polygons. 2019-07-16 16:41:21 +01:00
Jeff Young 6da11de5e0 Be more careful about thermal reliefs for pads on different layers.
Fixes: lp:1605049
* https://bugs.launchpad.net/kicad/+bug/1605049
2019-07-14 23:15:39 +01:00
Jeff Young fe188489c7 A better hack for the post-ProgressReporter-loss-of-focus issue. 2019-07-14 18:18:48 +01:00
Jeff Young 928d6c5dff Implement preserved-corners to prevent divots when filling adjacent zones.
Fixes: lp:1460787
* https://bugs.launchpad.net/kicad/+bug/1460787
2019-07-14 18:18:48 +01:00
Jeff Young 1a7cef2950 Improve performance, commenting and API of some polygon classes. 2019-07-14 10:39:38 +01:00
Jeff Young a3855cb4f2 Allow thermal spokes to be same width as minimum width.
Also some changes for readability and clarity, both in the code
and in the Feature Constraints panel.

Fixes: lp:1835674
* https://bugs.launchpad.net/kicad/+bug/1835674
2019-07-14 10:36:48 +01:00
Jeff Young 2d17d2b91f Cleanup and commenting. 2019-07-14 10:36:48 +01:00
Jeff Young 7ee6afeace Performance improvement for zone filling. 2019-07-06 00:04:54 +01:00
Jeff Young a2fe319b92 Fix bug introduced when edge-thickness adjustments were moved.
Fixes: lp:1835132
* https://bugs.launchpad.net/kicad/+bug/1835132
2019-07-03 12:12:00 +01:00
Seth Hillbrand 743c650129 Move zone refill to action
This unifies the zone refill across architecture into the tool-based
architecture.  Also provides ZONE_FILLER-based progress managment for
tools.

(cherry picked from commit be9cd98cb1)
2019-07-01 09:27:04 -07:00
Jeff Young 00cf8ba976 Fix rotated & offset pad thermal spoke geometry. 2019-06-26 00:04:35 +01:00
Jeff Young 107d206dba Back to the drawing board for zone filling.
This one doesn't cut any corners so should be "correct".  And it
turns out to be pretty fast.
2019-06-25 21:10:21 +01:00
Jeff Young d4054029cd Shrink/expand zone by minimum width only after doing all knockouts.
It's too complicated trying to keep everything smaller or larger by
half the pen width, and some things like spoke-end-detection need the
actual outline anyway.
2019-06-25 11:34:28 +01:00
Jeff Young 3784950603 Added more sophisticated checking for thermal spoke connections.
And, again, some more performance optimizations to make up for it.
2019-06-25 11:34:28 +01:00
Jeff Young 0ed26e4e33 Fix some geometry error in thermal spoke calculations.
Also introduces some performance enhancements to make up for the
extra time spent in the calculations.
2019-06-25 11:34:28 +01:00
Jeff Young e5cb8a0310 Bug fixes for rotated pad thermal spokes. 2019-06-25 11:34:28 +01:00
Jeff Young 70e6d95c7f More zone fill performance enhancements.
Knocking out unconnected spokes turns out to be very expensive, so
keep them in a list and only apply them if they're connected.
2019-06-25 11:34:28 +01:00
Jeff Young 14986d1e0e Zone fill performance enhancements.
Batch up fast operations to reduce the number of slow operations
required.
2019-06-25 11:34:28 +01:00
Jeff Young 79cd457ba7 Implement thermal spokes for custom pad shapes.
The thermal spokes are anchored at the pad anchor.  They may or may
not make sense, depending on the pad shape.  It's up to the author
to move the anchor around as necessary or to not use thermals.
2019-06-25 11:34:28 +01:00
Jeff Young 5c89e4490e Change zone fill algorithm to better handle thermal reliefs.
Thermal reliefs must not knock-out spokes of other pads, while
clearances must knock-out spokes of all pads.  Therefore we now
do all thermal reliefs, then all spokes, then all clearances.

Fixes: lp:602176
* https://bugs.launchpad.net/kicad/+bug/602176

Fixes: lp:1782957
* https://bugs.launchpad.net/kicad/+bug/1782957
2019-06-25 11:34:27 +01:00
Seth Hillbrand 251e0ca19c Minor bug fix to zones
On linux, m_brdOutlinesValid initialized to "true" which prevented
non-copper zones from filling correctly
2019-06-22 10:56:37 -07:00
jean-pierre charras c8c318510e Pcbnew, zones filler: fix a bug I introduced in my commit b1803bc. 2019-06-22 16:41:20 +02:00
jean-pierre charras b1803bcf02 Pcbnew, zones filled: fix incorrect clipping of filled areas outside the board outlines.
fix also an other minor issue: these filled areas were slightly too large.
2019-06-22 09:55:57 +02:00
jean-pierre charras e75be4074e Pcbnew: finalize the new zone filling algo (filled polygons with no thickness). 2019-06-05 18:36:20 +02:00
Seth Hillbrand 9163ac543a pcbnew: Move pads to std::deque 2019-06-01 16:23:54 -07:00
Seth Hillbrand d1877d7c1b Moving modules from DLIST to std::deque 2019-06-01 09:53:23 -07:00
Seth Hillbrand 6bcf1839b7 pcbnew: Add arc approximation setting to board
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments.  This allows the user to customize their speed vs. accuracy
tradeoff.  The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
2019-05-24 21:21:06 -07:00
jean-pierre charras ce93934f08 Pcbnew, ZONE_FILLER: fix incorrect test to remove filled areas outside the board edge cuts.
This incorrect test was only for zones with no net.
2019-05-23 20:22:03 +02:00
Seth Hillbrand ddc6079ceb Move remaining hard-coded segment counts
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
2019-05-16 08:49:55 -07:00
jean-pierre charras 4e5a94efb7 Pcbnew, non copper zones: fix 2 issues.
1 - For debug purposes, the code to fill non copper zones was disabled and the copper zone code was uses instead.
It creates issues with pad clearance areas, because a non copper zone has no clearance areas.
2 - The non copper zone dialog had no option to set the outline smoothing option.
Unfortunately, this parameter was inherited from the last edited copper zone.
And therefore the non copper zone can have a non wanted outline smoothing option.
This option is now added to the dialog.

Fixes: lp:1826952
https://bugs.launchpad.net/kicad/+bug/1826952
2019-04-30 13:16:29 +02:00
Jeff Young dae41b7460 Remove legacy segment-based zones.
Give the user the option of cancelling a file open if there are
segment zones; otherwise they're converted to polygon fills.

Fixes: lp:1823087
* https://bugs.launchpad.net/kicad/+bug/1823087
2019-04-12 20:19:23 +01:00
jean-pierre charras aa53b5508e Zone filler: fix missing calculation of filled polygons when fill mode is ZFM::SEGMENTS 2019-04-10 17:49:40 +02:00
jean-pierre charras 37ae0bf809 Pcbnew: fix a serious issue in ZONE_FILLER. 2019-04-09 11:38:18 +02:00
Jeff Young 52e3a1d7c4 Trim zone fills to board outline.
Fixes: lp:1820306
* https://bugs.launchpad.net/kicad/+bug/1820306
2019-04-08 13:10:29 +01:00
Jeff Young 1ae47b6069 Implement a copper-to-edge-clearance setting.
For legacy boards, the setting is picked up from the board outline
thickness.  If the board outline has mixed thicknesses, then the
max is used and a warning is displayed.

Fixes: lp:1797787
* https://bugs.launchpad.net/kicad/+bug/1797787
2019-04-05 22:18:44 +01:00
jean-pierre charras 7170720f3c Allow hatch pattern in filled zones
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
2019-03-31 08:21:40 +02:00
jean-pierre charras fdfe5eabfb Fix incorrect detection of filled zones changes in DRC check.
Commit 6006703798 fixed a crash but broke the filled zones changes detection.
Filled zones were always seen as not up to date due to the fact the filled areas were cleared too early.

The up to date detection is also optimized: the old filled polygons are no longer stored.
Instead of, the MD5_HASH is calculated and stored before clearing the filled polygons.
2019-03-21 15:27:05 +01:00
jean-pierre charras 353d9d7c9e Pcbnew, Zone refill: avoid useless refilling, when zone parameters are not modified.
Previously, in many cases the selected zone was refilled on exit selection, even if the zone was not modified.
This is annoying, because the zone fill can be really time consuming, and cannot be called without a good reason.
Now the refilling is made only if a zone parameter is actually modified.
2019-03-14 17:33:25 +01:00
Seth Hillbrand 6006703798 pcbnew: Remove fills prior to updates
Removing existing fills will prevent re-drawing invalid polygons before
they are ready.  This seems to happen on Macs more easily due to redraw
timing.

Fixes: lp:1819553
* https://bugs.launchpad.net/kicad/+bug/1819553
2019-03-11 16:25:43 -07:00
jean-pierre charras b9944e2c06 Thermal reliefs: fix a corner case that wrongly removes a stub in a thermal shape.
This was due to the stub removal tests if a stub end is outside a solid area to remove it.
There is a corner case: is the stub end is exactly on a solid area outline extra segment
created by Fracture() used in calculations.

The stub removal tests are now made before fracturing.

Fixes: lp:1819317
https://bugs.launchpad.net/kicad/+bug/1819317
2019-03-10 19:14:53 +01:00
jean-pierre charras 2768b3ddbe Pcbnew: fix check zone fills before plotting doesn't test no net zones.
Fixes: lp:1817797
https://bugs.launchpad.net/kicad/+bug/1817797
2019-02-27 11:27:18 +01:00
jean-pierre charras 9cac0a38cc DIALOG_GRAPHIC_ITEM_PROPERTIES: better tooltip.
minor other code enhancement (does not create any actual change)
2019-01-19 12:35:35 +01:00
Seth Hillbrand 6b75f589e9 pcbnew: Do not remove islands from no-net zones
No net zones, by definition, do not connect to any other element.
Therefore, the entire net is an island and should not be removed by the
knockout section

Fixes: lp:1811239
* https://bugs.launchpad.net/kicad/+bug/1811239
2019-01-10 16:17:37 -08:00
Seth Hillbrand 12e0e72107 pcbnew: Don't knock out thermals for non-conn zone
Non-connected zones are, by definition, not connected, therefore, we
should not knock out thermal reliefs under any case

Fixes: lp:1810989
* https://bugs.launchpad.net/kicad/+bug/1810989
2019-01-08 14:24:28 -08:00
Seth Hillbrand 25f8b1ce72 pcbnew: Update multiple zone segments
Where we can get away with lower segment counts (localizing an anchor),
we keep the low-def 16 segment count.  Intermediate values and values
that are visible to the user are set to high definition.  Most are
simply hints to the inflation correction but where they show, the user
show see smooth lines.
2019-01-03 17:34:59 -08:00
Seth Hillbrand 847f6ab4b3 Spelling fix HIGHT->HIGH 2019-01-03 17:10:27 -08:00
Seth Hillbrand 064303e238 pcbnew: Move zone-knockout to default high def
Most rounding operations have been shifted to an absolute error
calculation and the ability to adjust zone segment counts has been
removed in 5.1.  The remaining elements that use fixed segment counts
are either 18 (DRC) or 32 (plotting).  This aligns the punchout segment
count with the higher (32) definition value
2019-01-03 17:09:56 -08:00
Seth Hillbrand 55f2a79957 pcbnew: locking connectivity using RAII
Rather than depend on proper unlocking for each exit, we move the
connectivity lock mutex into an RAII-type configuration that
automatically unlocks on exit.
2018-12-20 11:04:08 -08:00
Jeff Young f69ea8b4a2 Don't cut invisible module text out of zones.
Fixes: lp:1808651
* https://bugs.launchpad.net/kicad/+bug/1808651
2018-12-15 20:15:19 +00:00
Jeff Young dd9a001077 Turn off bugfix for lp:1797787 for 5.1.
This allows people to continue to use the edge-width as a proxy
for board edge clearance until we implement board edge clearance
as a real feature.

Fixes: lp:1797787
* https://bugs.launchpad.net/kicad/+bug/1797787
2018-12-08 17:09:41 +00:00
Jeff Young bcc8c64256 Consider edge cuts items to have zero width when filling zones.
Fixes: lp:1797787
* https://bugs.launchpad.net/kicad/+bug/1797787
2018-11-14 23:45:32 +00:00
Seth Hillbrand 1f25fcd3d6 pcbnew: Shift zone filler to std::async 2018-11-06 09:28:12 -08:00
Seth Hillbrand 4460313104 pcbnew: Separating connectivity to subdir 2018-10-12 16:31:09 -07:00
Seth Hillbrand 10d348999e pcbnew: Fix minor counting issue
The evaluation of count_if resulted in a 0 or 1, leading to segment zone
fills always running on single processor and the progress bar showing
incorrect status.  Likely infrequently hit as only affected segment
fills.
2018-10-09 05:37:48 -07:00
Seth Hillbrand 969e85daa3 pcbnew: Standardize zone fills threading
This is a boyscouting commit to standardize the threading of zone fills.
We do not need to join threads after their completion, instead we simply
allow them to clean up their memory without blocking the user.  This
also sets the maximum number of threads that may be created to the
number of zones being filled.  More than this will only leave un-used
threads being created and immediately killed.

We also include the connectivity search as a phase in the fill progress
reporter.  This was the case before but did not utilize the correct
maxsize, leading to stalled progress bar.
2018-09-21 12:44:20 -07:00
Seth Hillbrand 47fac8a259 Removing some unused code 2018-09-20 12:52:53 -07:00
Jeff Young c90a3efea2 Change KIDIALOG hashing algorithm to __FILE__ + __LINE__.
Using Title + Message wasn't working for all the dialogs which
did substitutions in the message (which was a lot of them).

Fixes: lp:1789348
* https://bugs.launchpad.net/kicad/+bug/1789348
2018-08-29 23:38:23 +01:00
jean-pierre charras d9d005190a Zone filler: fix a recent bug that forgot items on edge_cut when filling a copper zone.
Fixes: lp:1789067
https://bugs.launchpad.net/kicad/+bug/
2018-08-28 09:49:11 +02:00
Jeff Young 0e3919e7aa Fix DRC & zone filling for copper text in footprints.
Also improves handling of copper edges in footprints and of text
and track locations in DRC markers.

Also adds DRC for tracks & zones.

Fixes: lp:1762474
* https://bugs.launchpad.net/kicad/+bug/1762474

Fixes: lp:1788268
* https://bugs.launchpad.net/kicad/+bug/1788268
2018-08-24 10:56:13 +01:00
Jeff Young 99db5cb543 Allow for reduced nagging with wider use of KIDIALOG.
(cherry picked from commit c2dd5df)
2018-07-17 15:13:53 +01:00
Seth Hillbrand ee34aab07a Async hardening
There are three related changes here to harden our handling of threads
in the footprint async loader.

1) Footprint async loader explicitly aborts any remaining loader threads
on exit.

2) We protect the thread join by a mutex

3) We do not pause during no-wait routines
2018-06-04 15:08:40 -07:00
jean-pierre charras e57cd291ff class BOARD: rename m_Zone to m_SegZoneDeprecated to avoid mistakes in code.
m_Zone is a fully deprecated list of SEG_ZONE items (similar to TRACK), used to fill copper zones in *very old* boards.
it is even unlikely there are still boards that use them.
So it should be removed one day.
2018-05-13 08:39:36 +02:00
Jeff Young a31017bc9c Check zone fills before plotting.
Also adds a "Draft Plot" button for those who wish to sidestep
zone checking (which can be slow).

Fixes: lp:1712579
* https://bugs.launchpad.net/kicad/+bug/1712579
2018-05-05 23:40:40 +01:00
Maciej Suminski 684f085ac5 Coverity fixes
CIDs:
dereference before null check:
175439 @ drc.cpp

uninitalized field:
175435 @ point_editor.cpp
174162 @ zone_filler.cpp
163188 @ footprint_info_impl.cpp

logically dead code:
155146 @ pcb_editor_control.cpp
2018-05-04 14:06:08 +02:00
Jeff Young e84e5606c9 Fix compiler warning. 2018-04-17 15:06:38 +01:00
Jeff Young f83ebb316e Don't refill if zone fills aren't out-of-date. 2018-04-09 17:04:51 +01:00
Jeff Young 05dae96275 Move zone out-of-date check to the right place.
Fixes: lp:1760097
* https://bugs.launchpad.net/kicad/+bug/1760097
2018-04-09 15:09:47 +01:00
Jeff Young d54a252eaa Check zone fills for being out-of-date during DRC. 2018-04-09 11:05:14 +01:00
Jeff Young fbf10e941b Switch zone fillets to absolute-error algorithm.
And some general cleanup to related constants, etc.
2018-03-23 12:46:17 +00:00
jean-pierre charras d52491c715 Custom pads: allows solid connection to zones.
The 2 options are now: no connection and solid connection
2018-03-11 20:39:29 +01:00
jean-pierre charras 51fe063524 Circle to polygon conversion: a few enhancements:
* Remove duplicate code
* fix incorrect formulas is some places
* add comments
2018-03-09 13:28:47 +01:00
Seth Hillbrand 218f66a08b Fix sign comparison warning 2018-03-05 09:20:19 -08:00
Jeff Young c77d13292b Reinstate multi-threading in zone filler. 2018-03-03 17:41:53 +00:00
Jon Evans 8c1847f7ab Don't allow ZONE_FILLER::Fill to run more than once at a time 2018-02-23 09:43:23 -05:00
jean-pierre charras 4012aa70da Fix a few minor Coverity warnings 2018-02-15 10:16:17 +01:00
Jeff Young f68bf33cd3 Implement progress reporter for cvpcb footprint loading.
Fixes: lp:1676910
* https://bugs.launchpad.net/kicad/+bug/1676910
2018-02-13 20:21:38 -05:00
Maciej Suminski 86566fc142 Fix a hang-up during zone filling
On OpenMP single core systems only the first thread launched. It means
that only the UI updating thread was running, without the one
responsible for actual computation. It is fixed by enforcing at least
two threads.
2018-02-09 14:26:06 +01:00
jean-pierre charras 81642dddd1 Track polygon clearance: use the new TransformOvalClearanceToPolygon function, to avoid underestimation of clearance areas.
(issue already found for oval pads)
Add some comments.
2018-01-21 11:32:37 +01:00
jean-pierre charras 67a152ee8d zone filler: fix incorrect calculation of segments when filling zones with segments.
The calculation was made too early, before removing insulated islands.
Note: filling zones with segments is an old option, not very useful:
using only polygons has never created issues in gerber files.
2018-01-14 09:51:32 +01:00
Jon Evans 47b8b6dc6a Fix typo causing isolated thermal removal to not work
Fixes: lp:1741265
* https://bugs.launchpad.net/kicad/+bug/1741265
2018-01-06 16:55:02 +01:00
jean-pierre charras 2398d5ef8b DIALOG_EDIT_COMPONENTS_LIBID: enhancement in orphan automatic remap:
add dialog to choose the right candidate when more than one is found
2017-12-16 14:50:37 +01:00
Tomasz Włostowski 75b21d010b pcbnew: more thread (and nested wx event loop) safety for the zone filling/connectivity algo 2017-12-14 23:49:46 +01:00
Tomasz Włostowski eed924fe45 Fixed zone filling crash & thermal stubs inconsistency
Fixes: lp:1737557
* https://bugs.launchpad.net/kicad/+bug/1737557
Fixes: lp:1737542
* https://bugs.launchpad.net/kicad/+bug/1737542
Fixes: lp:1737541
* https://bugs.launchpad.net/kicad/+bug/1737541
2017-12-14 01:29:08 +01:00
Maciej Suminski f19aed9d5c Workaround for OSX freeze when filling zones in GAL
More details:
https://lists.launchpad.net/kicad-developers/msg32306.html
2017-12-11 10:39:58 +01:00
jean-pierre charras cdad02336d fix minor compil warnings 2017-12-05 18:02:53 +01:00
Tomasz Włostowski 7ad436c7aa pcbnew: now PROGRESS_REPORTER should work in multi-threaded context under Windows... 2017-12-05 14:54:57 +01:00
Tomasz Włostowski f34b86d39e pcbnew: made zone filling algorithm thread-safe.
- moved zone filling algo outside ZONE_CONTAINER class
- const'ified methods that don't need to modify zone's properties
- cleanup: m_FillMode -> enum
2017-12-05 14:54:57 +01:00
Tomasz Włostowski fdd5023aee pcbnew: factored out ZONE_FILLER to a separate file 2017-12-05 14:54:57 +01:00