CHANGED: When using tools like the ruler, circle, arc, etc, they
display info text. If the view is flipped, the text is also flipped.
This MR fixes the flipped text and also corrects text X offset and
justification to match normal view.
CHANGED: When using tools like the ruler, circle, arc, etc, they
display info text. If the view is flipped, the text is also flipped.
This MR fixes the flipped text and also corrects text X offset and
justification to match normal view.
Iteration on a suggestion from Mikołaj Wielgus to resolve
elusive crashing issue when searching in lib tree in GTK.
GTK issues two commands when clearing (BeforeReset() and AfterReset())
BeforeReset() needs to have a valid model and cannot have selection
events during its lifetime. On MacOS and MSW, this is a NOP.
AfterReset() performs the re-association for GTK, removing the need for
the extra associate step. For MacOS and MSW, this is only the Cleared()
action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5732
Fixes https://gitlab.com/kicad/code/kicad/issues/5891
To avoid issues with broken Gerber readers use aperture macros with shapes
without rotation when more than one primitive is required.
In many gerber readers, rotation of a set of primitives is broken
(do not follow Gerber requirements)
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
This uncovered a memory corruption bug in MODULE's move operator,
several bugs in MODULE's move and copy constructors, and a bug in
BOARD's GetItem() call.
It also bumps the file format for saving/restoring groups inside
footprints.
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
Previously, init order depended on the ordering of the
tool state map, which is opaque from the point of view of
registration. This makes it challenging to make one tool's
init depend on another. With this change, registration
order defines init order.
They're only on screen when they're being used, and we don't have
a GAL available to calculate their actual extents from (since their
text scales with zoom).
Fixes https://gitlab.com/kicad/code/kicad/issues/5845
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
There were issues on OSX where the mouse being captured
by the parent toolbar would lead to seg faults, so release
the mouse on opening the palette.
Releasing the mouse then means that the mouse states become
confused, so we need to manually clear all the mouse states
when we open the popup.
Fixes https://gitlab.com/kicad/code/kicad/issues/5803
Fix compile error
Fix string format to use %ld instead to work on clang in CADSTAR Archive importers
Add virtual destructor to CONNECTION in CADSTAR_ARCHIVE_PARSER
Fixed missing tokens that weren't parsed before:
- Danglers (in NET_SCH)
- Pin numbers (in SYMBOL)
- HidePinNames in both PART and PART::DEFINITION, defaulting it to false
plotter.h contains now only a header common to all plotters.
The code does not actually change, but it allows modifying a specific plotter
without recompiling most of kicad files.
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
The infobar changes the size of the visible screen, so adding/removing
it will shift the screen center, causing the position of onscreen
objects to move up/down. This changes the sizing to pin the bottom
corner position when showing/hiding the infobar
Fixes https://gitlab.com/kicad/code/kicad/issues/5776
This changes the file format. All previous copper layers that had a user
defined name are forced back to the canonical name and the user defined
name is stored as an optional quoted string in the layer definition and
only used for UI and plotting purposes. All copper object layer names
are now the canonical name for internal file use.
ADDED: Nine new user definable non-copper layers that can be optionally
added to the board layer stack.
CHANGED: All board layers can now be renamed by the user.
CHANGED: User defined layer names can now contain space characters.
Fixes https://gitlab.com/kicad/code/kicad/issues/1969
The OpenGL missing segments (when small) are due to rounding in larger
coordinates. The GAL shader uses floats to represent int32 values for
position and distance. Thus, at larger coordinates, the smaller integer
values cannot be represented accurately. This tests for the rounding
error and, if it exists, draws a plain circle instead
Fixes https://gitlab.com/kicad/code/kicad/issues/5751
These settings objects could be created in a constructor/destructor
so we should catch the exception since those are noexcept.
Also change the settings trace to match the other kicad traces
as KICAD_SETTINGS
This exception will probably never be thrown in real life,
but the constructors are normally noexcept, so throwing
any exception from the json library causes Coverity to
have a fit.
Windows specific, because other OS do not accept user bitmaps in ckeckable menuitems
the bug was due to the same bitmap was set for each state for these menuitems.
Fixes#5622https://gitlab.com/kicad/code/kicad/issues/5622
Also improves the SNR and consistency of the menu item text. For
instance, a position is rarely useful, while relative sizes can be.
Also removes some unnecessary repitition, such as "Graphic Rectangle"
when "Rectangle" communicates the necessary information.
CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
The previous fix (d4461f6) removed all vars before re-add them.
Clear all vars created issues with externally defined variables (the internal
initial value was lost)
Now only old, no longer existing, vars are deleted.
Fix also a potential issue related to non ASCII7 in last stored path.
When updating common environment variables list, the initial list was never
deleted. Therefore one could not remove an existing var.
The common environment variables list is now deleted before updating.
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
Loading speed fixed by changing the way CADSTAR_ARCHIVE_PARSER::InsertAttributeAtEnd works (we now have a new attribute in each node to keep track of how many attributes there are). Now loads a 30,000 line file in 10seconds instead of 25 minutes!
Better fix than a0df876d
For new users, if this folder does not exist, saving colors does not work,
because if this folder does not exist, it is not created.
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
Also moves to WX_GRID to get rid of some wxGrid bugs, and moves the
provision of attrs to the GRID_TABLE (as those applied to the grid
are ignored when a table is specified).
Fixes https://gitlab.com/kicad/code/kicad/issues/5260
For instance, we get things like high-contrast-mode from the pad
dialog when rendering a pad preview, but we want the colours from the
parent PCB_BASE_FRAME.
The stepping is in a static event handler, so it is called
after the dynamic handler and so the dynamic handler must
allow the event to continue processing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5319
windowClosing() calls Destroy() when the wxCloseEvent has no veto.
This is fine for usual EDA_BASE_FRAME frames, but not for frames shown in modal mode.
In modal mode, windowClosing() should not call Destroy(), because the calling frame
expects the instance not deleted after closing.
(the caller has to call Destroy() only once the frame can be actually deleted)
LayerName() can now be called to get the default, translatable name
for any board layer. LSET::Name() is used for the untranslated
names required for parsing board files.
We use the LIBID for board files to locate the correct library for the
footprint. Once exported, the footprint should be associated with the
library that contains it, if any.
Fixes https://gitlab.com/kicad/code/kicad/issues/5400
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
For now, much of KiCad depends on Prj() working, so when we
are asked to unload a project, immediately load the null project
so that nothing breaks.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5374
This commit applies display origin transforms to all Pcbnew
dialog classes that use UNIT_BINDER for their formatting:
* DIALOG_CREATE_ARRAY
* DIALOG_FOOTPRINT_BOARD_EDITOR
* DIALOG_GRAPHIC_ITEM_PROPERTIES
* DIALOG_GRID_SETTINGS
* DIALOG_MOVE_EXACT
* DIALOG_PAD_PROPERTIES
* DIALOG_POSITION_RELATIVE
* DIALOG_TEXT_PROPERTIES
* DIALOG_TRACK_VIA_PROPERTIES
This commit adds the PCB_ORIGIN_TRANSFORMS class, which is derived
from the ORIGIN_TRANSFORMS class, and provides a set of templated
functions to convert PCB coordinates between internal representation
and display representation. It extends the ORIGIN_TRANSFORMS class
to understand the three user-selectable display origins and the
coordinate direction display options.
This commit modifies the UNIT_BINDER class to invoke the ORIGIN_TRANSFORMS
methods to support Display Origin Transforms.
The EDA_DRAW_FRAME class is modified to instantiate an ORIGIN_TRANSFORMS
object providing null transforms. A function is provided to allow the
UNIT_BINDER to find the ORIGIN_TRANSFORMS object in an overrideable manner.
This commit adds the ORIGIN_TRANSFORMS class to support Display Origin
Transforms in all KiCad applications.
Functions are provided to perform four basic types of origin coordinate
transforms:
* Transform a relative coordinate from internal to display form
* Transform a relative coordinate from display to internal form
* Transform an absolute coordinate from internal to display form
* Transform an absolute coordinate from display to internal form
These functions are supported for data types "int", "long long int",
and "double". The default implementations for all but "int" simply
return their input unchanged; the implementation for "int" invokes
the implementation for "long long int".
The expectation is that the different KiCad applications will create
derived classes from this base class and override the functions as
needed. Protected template functions are provided for the standard
translations to maintain consistency within the derived classes.
A subsheet may have more than one instance of a hier label,
but it's generally a mistake if there is no matching hier label
for a port on the parent sheet.
This is harder to do today now that we don't have manual tool
for placing hier ports, but it's still possible if you place
ports but then rename the label on the subsheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3468
We probably don't need it, but some code attempts to dereference
it so safer to have one then to start checking everywhere for
dereferences.
Fixes https://gitlab.com/kicad/code/kicad/issues/5353
Display warning infobar in the board/schematic setup when no project
is loaded, since most of the settings in those dialogs are saved in
the project and not in the board/schematic file.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4868
Short net names are not unique; full names with paths must be used.
Added a grid cell renderer that does the escaping, to make it easier
to display net names in grid cells.
Once you unescape a net name, you can't go back to the escaped form
because you can't assume which `/` should be {slash} and which `/`
Because of this, we cannot use Unescape/Escape on the data model in
the netclass setup panel, and instead do the Unescape in the view.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5331
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
Cairo Polyline and Polygon draw functions share a common routine. While
Polygons must have 3 points to allow triangulation, a polyline (like our
text) need only have 2
This resolves a crash when passing an empty polygon and alerts debug
users to possible generation cases when bad polygons are created.
Thanks for Frans Zellman
(https://gitlab.com/kicad/code/kicad/-/merge_requests/365) for
identifying the issue.
This freeze/thaw is different than the update locker freeze/thaw,
and is needed to prevent crashes due to accessing invalid (already
freed) data on GTK.
Fixes https://gitlab.com/kicad/code/kicad/issues/5289
The tree model adapter appears to have update issues when modifying the
scores while it _might_ get updated. This moves the lock higher and
removes the extraneous Freeze/Thaw call.
Unfortunately, this only exposes an additional issue in the tool handler
but this will hopefully be easier to debug.
Fixes https://gitlab.com/kicad/code/kicad/issues/5206
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
Flags != language See http://www.flagsarenotlanguages.com We now use
local, untranslated language names for all languages.
Languages that have not been updated in >5 years and have less than 15%
of available strings translated have been removed from the menu options.
If a translator steps up to update the .po files, we can re-add them
This leaves the decision to check/enable menu items to the main UI
conditions, and only the menu has control over showing/hiding the menu
items. Also rip out a special case for the preferenes item that isn't
needed on OSX anymore since all the main menus have been moved to
ACTION_MENUs now.
CHANGED: Don't run the hotkey if the action's UI elements aren't enabled
This makes it so the action can't be run from either the hotkey or the
UI if its enabling conditions are not met.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
EDA_ITEM is a child of VIEW_ITEM, so a static_cast is not appropriate,
since in some cases it could be called with a non-EDA_ITEM argument.
This was triggering an ASAN heap-buffer-overflow in GerbView.
The variables in the common settings struct are only updated on
save, so Python must use the ones from Pgm to get its values.
This does lead to the observation that Python's changes to the
variables do affect KiCad (they can break resolvers). So apparently
it can mess with us but we can't mess with it easily.
Also, improve the environment variable tracing infrastructure to capture
more changes.
Just setting the text field is not guaranteed to fire
a text event, so we must forcefully call the regenerate
function to ensure the preselect is handled.
Fixes https://gitlab.com/kicad/code/kicad/issues/4105
Jeff Young
jean-pierre charras
Marek Roszko
PJM
Jon Evans
Seth Hillbrand
Michael Kavanagh
Ian McInerney
Tomasz Wlostowski
Wayne Stambaugh
Mikolaj Wielgus
Roberto Fernandez Bautista
Simon Richter
qu1ck
Dominik Wernberger
Mario Luzeiro
Fabien Corona
Reece R. Pollack
Thomas Pointhuber
Qbort