10098b5c71
Some minor fixes and cleanup.
2015-07-03 10:42:47 +02:00
3907de0289
Modedit: fix Bug #1471020 (user grid not stored)
2015-07-03 10:15:37 +02:00
766da1e494
Code formatting.
2015-07-02 16:11:15 +02:00
f650eca784
dialogs: store inline drag mode in PNS settings dialog
2015-07-02 16:10:54 +02:00
a180f70086
router: compute (and display) DP gap dynamically when tuning length
2015-07-02 16:10:49 +02:00
0ade919a98
router: fix shortcut crash & inline dragging for inline dragging P&S
2015-07-02 16:10:07 +02:00
2fd493255d
router: compute diff pair gap on the fly when tuning the length
2015-07-02 16:10:02 +02:00
171d39c8d0
router: invoke interactive drag when dragging traces/vias in edit tool (disabled by default)
2015-07-02 16:09:56 +02:00
a86fda1d37
tools: added TOOL_SETTINGS class for storing persistent tool settings in config file (just a wrapper for wxConfigBase) router: free angle mode (mark obstacles only) & persistent settings
2015-07-02 16:09:51 +02:00
7724c581fd
router: support for non-90 degree pad orientations
2015-07-02 16:09:43 +02:00
4abcc159d2
router: don't run optimizer if head line == NULL or on shove failure
2015-07-02 16:09:38 +02:00
52e193eded
router: fixing assert
2015-07-02 16:09:32 +02:00
e6dd016cb2
router: improve rounding error handling in hull calculation
2015-07-02 16:09:29 +02:00
f96c65254c
router: allow for insertion of a via without leading trace (e.g. in the middle of already existing trace)
2015-07-02 16:09:24 +02:00
a3edd9706f
router: more robust nearest obstacle clipping
2015-07-02 16:09:16 +02:00
c48a417dcd
Pcbnew: Replace wxComboBoxes by wxChoice in auxiliary horizontal toolbar, to try to avoid issues on OSX (combo boxes not responding to mouse clicks).
2015-07-02 14:51:27 +02:00
1311f81448
Replace wxComboBoxes by wxChoice in auxiliary horizontal toolbar, to try to avoid issues on OSX.
2015-07-02 11:50:38 +02:00
1073ba1999
Fixed crash on double switching to legacy canvas on start.
2015-07-02 11:40:36 +02:00
d3e276387d
Ratsnest fix (GAL).
2015-07-02 11:25:59 +02:00
5c7f073a28
Hotkeys: try to use Cmd instead of Ctrl on Mac OSX.
2015-07-02 09:28:54 +02:00
51c0ae3480
Fixed cursor offset in GAL.
2015-07-01 03:46:42 +02:00
377942ed2a
Minor fixes.
2015-06-30 18:31:48 +02:00
b352ef9deb
Panning with keyboard (GAL).
2015-06-30 14:08:29 +02:00
30b679ae5e
Cursor control with keyboard (GAL).
2015-06-30 14:08:24 +02:00
b5ef511063
Fixed alignment to grid when there is a grid offset (GAL).
2015-06-30 14:08:03 +02:00
5ca8e0b9d6
Fixed incorrect polygon finishing in 45-degree mode (GAL).
2015-06-30 13:55:30 +02:00
3076876ef2
Dialog set grid: add error checking in dialog (min and max grid size and max offset)
2015-06-28 16:11:57 +02:00
f556161a21
Fix Pcad to kicad circle conversion.
2015-06-28 16:02:47 +02:00
7be1d32a10
Fix minor issues (included Bug #1469358 hierarchical sheet pin not redrawn after edition)
2015-06-27 11:12:32 +02:00
15857f22ca
Fixed dragging offset in eeschema after crossprobing a multipart component in pcbnew GAL canvas.
2015-06-26 17:32:48 +02:00
37db33cbca
Update cross hairshape (GAL).
2015-06-26 17:30:41 +02:00
a43a288e10
Update zones when DRC is launched (GAL).
2015-06-26 17:30:04 +02:00
ac6a90afa3
Update ratsnest after properties are changed.
2015-06-25 17:36:57 +02:00
71b3125d8e
Cleanup: remove unnecessary macros EXCHG and NEGATE. add MIRROR macro.
2015-06-26 15:41:56 +02:00
3e398ce1c6
Fix assertion in CvPcb, Eeschema, and Pcbnew when cancel is selected from save on exit dialog.
2015-06-25 15:06:51 -04:00
8699fdf12e
Pcbnew: minor Protel gerber file extension fixes.
...
* Assign file extensions .g1d, .g2d, .g3d, ... for internal copper layers.
* Assign file extension .gm1 for edge cut layer.
2015-06-24 13:59:44 -04:00
257ee806fd
Pcbnew: enhancements in algorithm to build the board outlines as polygon (with holes) in specctra.cpp. the polygonal description is used in specctra export but also in 3D viewer.
2015-06-24 18:13:25 +02:00
a8bffb862c
Fix for disappearing ratsnest lines (GAL).
2015-06-24 00:28:21 +02:00
5a4e528d6a
Correct PNS boundaries for offset pads.
2015-06-23 11:41:53 +02:00
3160553d31
Specctra export/import: fix an issue: via drill sizes were not round tripping if they were bigger than the default.
2015-06-23 10:37:54 +02:00
bf2f480b7c
Dialog exchange modules: add a fp selection from the fp viewer
...
Fix also an issue on Windows, when using the footprint viewer or the component viewer in modal mode:
Reason: these frames (when run under the Kicad manager) have the Kicad manager as parent, and were built with wxFRAME_FLOAT_ON_PARENT style.
On windows, when the frame with style wxFRAME_FLOAT_ON_PARENT is displayed its parent frame is brought to the foreground, on the top of the calling frame.
and stays displayed when closing the frame in modal mode.
This issue does not happen on unix so we use now wxSTAY_ON_TOP on Windows, and wxFRAME_FLOAT_ON_PARENT on unix to simulate a dialog called by ShowModal.
This is not perfect, but at least it works.
2015-06-22 19:21:34 +02:00
c55e729117
fp library wizard: remember last local download directory & refresh download progress dialog.
2015-06-22 14:24:40 +02:00
bea46ddde3
Fix a regression in session back-import from specctra, broken recently (The symptoms of this regression is that all tracks are moved to the front layer as they are back imported)
2015-06-19 20:01:22 +02:00
09febe745d
Remove a corner from zone outline function (GAL).
2015-06-19 17:32:33 +02:00
a988ebaabd
Zone merging (GAL).
2015-06-19 17:32:33 +02:00
39ddb3e9ae
Two new selection conditions: same net & same layer.
2015-06-19 17:32:33 +02:00
e91fdd0079
Removed redundant transition in SELECTION_TOOL.
2015-06-19 17:32:32 +02:00
8162260e80
Removed another dialog assert.
2015-06-19 17:32:32 +02:00
872a43ff92
Pcbnew: assertion work around when automatically saving an unnamed file.
2015-06-19 09:27:06 -04:00
4464032b6d
Blind vias currently user ALT-V for a hotkey. This will also open the View menu.
2015-06-19 08:32:31 -04:00
fe6cf2f5f8
3d-viewer: Fix a regression: grid was not updated ( now updated by calling CreateDrawGL_List )
2015-06-19 11:06:52 +02:00
355bd47e16
Edit microvia: fix incorrect drill size (Bug #1466653 )
...
Fix a few coverity minor warnings.
2015-06-19 10:55:37 +02:00
e211a77d8b
Pcbnew: fix ADD_APPEND option in BOARD::Add() so using version control for board files is practical.
2015-06-18 15:23:01 -04:00
4f71260319
Fix micro via size incorrect when adding it in pns router
2015-06-18 20:22:23 +02:00
a16dd894d5
Show Place & Drill origin in GAL.
2015-06-18 17:51:54 +02:00
28a270a328
Refactored grid origin point drawing (GAL).
2015-06-18 17:51:53 +02:00
2ebacfa3c2
GAL sets appropriate top layer after loading a PCB.
2015-06-18 17:51:53 +02:00
fa3d074ca4
Find command zooms in found items (GAL).
2015-06-18 17:51:52 +02:00
8964ff8922
Hotkey lists displayed after pressing the Help button (GAL).
2015-06-18 17:51:52 +02:00
f63170ca84
Tools available under toolbar buttons: delete items, highlight net, set drill/place origin (GAL).
2015-06-18 17:51:51 +02:00
057bd1b886
PICKER_TOOL - generic tool for picking a point.
2015-06-18 17:51:51 +02:00
ac10ca40f8
Net highlighting is moved to a separate TOOL_ACTION.
2015-06-18 17:51:50 +02:00
c636c4e735
Fix to closing polylines in DXF imports.
...
The DXF format polylines and lwpolylines have a 'flags' field of which bit 0 indicates if the polyline/lwpolyline is to be closed or open.
This flags field is correctly read during the import but in the conversion to board segments, was previously not used.
2015-06-18 17:51:17 +02:00
1c8fd8b207
Eeschema: remove the run cvpcb menu entry from eeschema tools menu when running as stand alone.
...
Pcbnew: fixes a problem exporting to DSN where the layername for B_Cu provided to the *.DSN file was incorrect
2015-06-18 15:29:26 +02:00
6ff03b41fd
Vias, creation and editon: fix a bug in legacy mode when creating a micro-via (the drill diameter was the standard vias drill, not the micro-via drill).
...
Also in global vas edition, always set the via drill to the actual current netclass value (do not use anymore the 0 value as default), to avoid unwanted invisible drill change for existing vias when the netclass value is modified.
This is consistent with the via creation, in GAL mode
2015-06-18 15:20:32 +02:00
07d6cbaeb7
Vias, creation and editon: fix a bug in legacy mode when creating a micro-via (the drill diameter was the standard vias drill, not the micro-via drill).
...
Also in global vas edition, always set the via drill to the actual current netclass value (do not use anymore the 0 value as default), to avoid unwanted invisible drill change for existing vias when the netclass value is modified.
This is consistent with the via creation, in GAL mode
2015-06-18 15:19:30 +02:00
3a9dfe274b
Zoom to DRC error after double clicking an entry (GAL).
2015-06-18 11:35:02 +02:00
d3b31316ba
Fixed module text visibility settings (GAL).
2015-06-16 17:03:36 +02:00
12adb25a71
Fixed 'Edit in footprint editor' hotkey (GAL).
2015-06-16 15:27:59 +02:00
dd5275f6c6
Minor SELECTION_TOOL fixes.
2015-06-16 14:51:39 +02:00
b562cfb8bb
WX_HTML_REPORT_PANEL: a REPORTER widget on steroids.
2015-06-16 14:20:42 +02:00
d433a06d11
Fixed initialization for custom track/via size values (PNS). More meaningful error messages.
2015-06-15 17:54:58 +02:00
49fac351ab
Fix a few coverity warnings.
2015-06-15 16:01:43 +02:00
6d07e9a754
Fixed dialogs asserts.
2015-06-15 15:54:58 +02:00
db44fc3649
Removed debug messages from Footprint Library Wizard.
2015-06-15 14:53:40 +02:00
c70f4a0706
Pcbnew: Increase board thickness limit from 3mm to 10mm
2015-06-14 20:18:34 +02:00
dc9ebf30e5
A few minor fixes. Eeschema: add a workaround (not afix) to solve issue Bug #1464773 (Print bug with differently sized subsheets).
2015-06-14 19:58:57 +02:00
fc15404947
Fix a build issue in scripting mode (due to a no more existing method still declared in class_zone.h header)
2015-06-12 18:32:24 +02:00
eba3a55bb2
pcbnew: new zone filling algorithm using ClipperLib. Possibility to fall back to the old one
2015-06-12 17:13:18 +02:00
8b33bfc61b
Fix remaining invalid net ID bugs in board file parser.
2015-06-12 09:59:58 -04:00
0027bb14c5
Pcbnew: read netlist dialog: remove the .cmp file option. Use only the netlist to know the footprint associated to a component.
2015-06-12 14:46:41 +02:00
097c73b8eb
Fix crash when parsing a PCB file with an invalid net code.
2015-06-08 15:28:04 -04:00
8fb520249e
Use KiwayExpress messaging for CvPcb footprint assignment instead of *.cmp file.
...
* Remove global s_NetObjectslist.
* Separate out non-owning version of NETLIST_OBJECTS_LIST into NETLIST_OBJECTS.
* Fix double free pertaining to ~NETLIST_READER().
* Remove all file-io from CvPCB.
* Remove exe launcher cvpcb, retain only cvpcb.kiface, since cvpcb.kiface has no file i/o.
* Add void CVPCB_MAINFRAME::KiwayMailIn( KIWAY_EXPRESS& mail ) and teach it to use old
netlist loading code with a STRING_LINE_READER LINE_READER.
* Fix BEGIN_EVENT_TABLE( CVPCB_MAINFRAME, KIWAY_PLAYER )
2015-06-07 14:18:45 -04:00
aadcd93ab5
Removed a redundant field in RN_NODE class.
2015-06-05 17:49:01 +02:00
e86351b1b0
Fixed ratsnest for tracks with 0 length.
2015-06-05 17:49:01 +02:00
fa421f15d8
Clearer dynamic ratsnest (for moved items).
2015-06-05 17:49:00 +02:00
16db8e644b
Logical operators for ratsnest node filters.
2015-06-05 17:49:00 +02:00
6cc535f27f
Less significant changes to the ratsnest code (GAL).
2015-06-05 17:49:00 +02:00
f202e5318c
Fixed SELECTION_CONDITIONS::lessThanFunc().
2015-06-05 17:48:59 +02:00
16daa04518
Fix title capitalization in P&S router properties dialog.
2015-06-05 09:59:57 -04:00
209e630873
Disable net highlighting after loading a new board.
2015-06-04 14:54:08 +02:00
ce4b4f8221
Update ratsnest on zone refill (GAL).
2015-06-04 14:54:08 +02:00
c23adc47b7
Ratsnest algorithm distinguishes layers (GAL).
2015-06-04 14:54:08 +02:00
42215f2388
Moved GetLayerSet() to BOARD_ITEM.
2015-06-04 14:54:07 +02:00
a12ea29de8
Refactored the way zones are kept in ratsnest model (GAL).
2015-06-04 14:54:07 +02:00
a2b8ab6b41
Ratsnest fix (GAL).
2015-06-04 14:54:07 +02:00
0331d9958a
Minor optimization for ratsnest.
2015-06-04 14:54:06 +02:00
e81477704d
Make OK button default in P&S router properties dialog.
2015-06-04 08:21:30 -04:00
064e8a82e1
Fixed an assertion in arc drawing tool (GAL).
2015-06-02 20:16:55 +02:00
ba37f33bbb
Pcbnew: Use a better (i.e. more suitable to calculate clearance areas) algorithm to inflate/deflate zones outlines. It fixes bug#1459734.
...
Previously, acute angles (especially small angles) in zone outlines create incorrect shapes and sometimes strange shapes for clearance areas, when using generic algorithms.
This happens when zones outlines have "spikes", but not usually for smooth outlines.
2015-05-30 14:02:55 +02:00
2500976e31
Fix undefined MODULE dtor for auto_ptr in pcb_netlist.h which caused a memory leak. Thanks Simon Richter for finding this.
2015-05-28 20:21:38 -04:00
2db1b3adc8
Print out footprint texts placed on layers different than silkscreen.
2015-05-27 22:14:51 +02:00
cfeabde282
Grey out text in high-contrast mode.
2015-05-27 22:13:51 +02:00
89143851ba
Added missing config file for nginx.
2015-05-27 15:33:33 +02:00
1cf6979d89
Dialog BOM: update help displayed by the help button.
...
Rename dialog_footprint_wizard_list.fbp to dialog_footprint_wizard_list_base.fbp, to be consistent with other dialogs.
2015-05-27 11:35:21 +02:00
60bcbba585
Configuration file for nginx.
...
Radically improves the speed of github plugin if run on a machine near you. It acts as a cache-ing proxy server.
2015-05-26 17:12:43 +02:00
775f08b2bb
Eliminate "PAD has no layer" warning for valid pads.
2015-05-26 16:33:46 +02:00
9ebcf41b8d
Fix bug #1458188 , about zone clearance, when a zone is inside an other zone, the clearance was sometimes not right.
2015-05-23 19:12:40 +02:00
fd907a413c
Minor changes: modify a few messages in dialogs to allow a better or more easy translation of these messages (too short messages cannot be safely translated).
...
Remove no more existing special.lib from template file kicad.pro
2015-05-22 13:00:43 +02:00
84ba36fa72
Allows switching GAL or legacy mode in footprint editor (previously, the mode was inherited from the board editor, and was not modifiable without closing the footprint editor) by menu or F9, F11 and F12 keys)
2015-05-19 18:39:05 +02:00
01c9f09833
wxWidgets under OS X require wxMenuItem ids to be >0.
2015-05-18 13:48:13 +02:00
6788e31a1e
Fixed context menu crash on OS X (GAL).
2015-05-18 13:48:12 +02:00
7c59d0dcc4
Layer toggling with 'Place Via' hot key when router is
2015-05-18 13:48:11 +02:00
26ee2092af
PNS router uses the legacy canvas hot key bindings.
2015-05-18 13:48:11 +02:00
15cefcda9f
Code formatting.
2015-05-18 13:48:11 +02:00
4fe65715a2
Added trivial connection selection (GAL).
2015-05-18 13:48:10 +02:00
00cf800ce8
Pcbnew: fix false DRC violations for oval pads, minor code cleaning and translate French comments in drc_clearance_test_functions.cpp file.
2015-05-17 12:58:23 +02:00
77249d9b2d
Minor fixes: remove a few useless includes and move a few others to the right file. Remove a few coverity warnings about not initialized members.
...
Minor bug fix: Zone duplicate zone in legacy mode: duplicate a zone to the same layer (and therefore the same location) is no more allowed.
2015-05-15 14:49:11 +02:00
4f3337f5ed
Fix hot keys for adjusting grid size (GAL).
2015-05-12 12:03:39 +02:00
37b0868376
Pcbnew: fix minor issues about fast grid switching, and next/previous grid selection from hotkeys. (GAL mode still has an issue)
2015-05-12 11:05:36 +02:00
4ebe471420
Minor fixes in add zone and duplicate zone (legacy mode)
2015-05-10 21:10:10 +02:00
e2c7e6bf02
onrightclick.cpp: remove useless wxClientDC, which was used only the hide/show (to the same location) the on-grid cursor during the creation of the popup menu (perhaps a trace of legacy code).
...
Minor changes in pcb_calculator GUI messages to make easier translation of these messages.
Cosmetic enhancements for 2 icons
2015-05-09 10:37:50 +02:00
e3700cae91
Enable/disable (depending on the display mode) menus which are usable only in GAL mode (and have no action in legacy mode)
2015-05-08 10:58:59 +02:00
7eaceffd35
Fixed weird handling of 'Find' action.
2015-05-05 20:39:42 +02:00
da75c52665
Hot keys settings are synchronized between GAL & legacy
2015-05-05 20:39:42 +02:00
99e5228948
Moved the list of TOOL_ACTIONs to ACTION_MANAGER.
2015-05-05 20:39:41 +02:00
425ddb92a7
Cosmetic enhancements in dialogs and menus
2015-05-03 20:43:07 +02:00
04ffd0a4ac
i18n pcbnew GAL popup menu entries
2015-05-03 17:53:44 +02:00
d41bc31c49
Fix bug #1447905 (very minor bug, in fact). Fix a few minor coding style issues.
...
Fix 2 coverity warnings.
2015-05-03 08:31:14 +02:00
2047d87317
Minor fixes (Bug #1414328 and Bug #1440312 ). Remove translatable attribute in a debug message.
...
tools/edit_tool.cpp: remove limitation (GAL mode) to delete the last pad in a footprint (a footprint can have 0 pad, for instance a logo)
2015-05-01 17:01:09 +02:00
5a02b91e5f
Fix some issues created by rev 5632:
...
* Use only double to store zoom levels in class BASE_SCREEN (int type is not working for eeschema or page layout editor) (this fix Bug #1450551 , Assertion failed on wxRound() when zooming)
* Fix crash in all apps but Pcbnew when a grid or a zoom was selected from the popup menu.
* Modify default hotkeys for Next Grid and Previous Grid: the initial key was a dead key, not suitable as hotkey. the 'N' and Shift N keys are used instead (with a change for unfill zone hotkey)
* Modify code in EDA_DRAW_FRAME::SetNextGrid() and EDA_DRAW_FRAME::SetPreviousGrid() to make them compatible with other editors than the board editor.
2015-05-01 11:31:23 +02:00
81ea3ce408
Missing files.
2015-04-30 11:08:18 +02:00
872259981a
CONDITIONAL_MENU supports separators and ordering.
2015-04-30 10:46:08 +02:00
958046ddb2
Moved SELECTION_TOOL context menu to a separate class.
2015-04-30 10:46:08 +02:00
9ef9b7b8e1
Preliminary selection mode for SELECTION_TOOL.
2015-04-30 10:46:07 +02:00
b8295b6af8
Code formatting.
2015-04-30 10:46:07 +02:00
d18ed945c9
Do not run OpenMP loops when there is no data to
2015-04-30 10:46:06 +02:00
787415c2aa
Updating the user grid size on change in GAL.
2015-04-30 10:46:06 +02:00
3e46f2233a
Corrected "Zoom Auto" in GAL with empty board.
2015-04-30 10:46:06 +02:00
6379d80636
Zoom & grid menus for GAL canvases.
2015-04-30 10:46:05 +02:00
06b978b829
Refactored CONTEXT_MENU, added handler for updating.
2015-04-30 10:46:05 +02:00
dfb0443b67
Refactoring library dependencies.
2015-04-30 10:46:05 +02:00
10a4b64005
More icons for context menus.
2015-04-30 10:46:04 +02:00
025d4cf23a
Alternative way of handling grid settings in GAL.
2015-04-30 10:46:04 +02:00
4be876a13a
Expandable CONTEXT_MENUs (GAL). Minor CONTEXT_MENU
2015-04-30 10:46:04 +02:00
946b9d1933
setTransitions() are called automatically for tools.
2015-04-30 10:46:03 +02:00
c4888afbcc
Refactored the way GAL handles zoom settings.
2015-04-30 10:46:02 +02:00
557bb43dd2
Moved TOOL_MANAGER & TOOL_DISPATCHER to EDA_DRAW_FRAME.
2015-04-30 10:46:02 +02:00
5c984aa069
Parametrized TOOL_ACTIONs.
2015-04-30 10:46:01 +02:00
699c76ccea
Rework on EXCELLON_WRITER class, to allow gerber and drill files creation from a python script.
...
added the example gen_gerber_and_drill_files_board.py in demos, which shows how to do that.
Fix a Printf format issue (shown in Debug mode) in Libedit (%d used for a size_t, changed in %zu)
2015-04-29 17:37:37 +02:00
569c2be354
Minor fixes: dialog rescue: make strings translatable. Remove a few coverity warnings (not initialized members). Very minor other changes.
2015-04-28 17:07:36 +02:00
c74f7b1a3d
Add missing dependency to build python wappers.
2015-04-27 21:27:59 +02:00
9da39717ae
Add a python script example in demo folder to create various plot files from a board. Fix also some issues in plot controller helper class.
...
Important note: from a python script one cannot plot the palge layout, because the page layout template file is not stored in the board file, but it is part of the project.
Because when using a python script, the project is not loaded, the page layout template is not known.
Trying to plot it crashes the script.
2015-04-27 20:02:27 +02:00
665f346a03
Arcs in modules and board were rendered incorrectly on vrml export (bug 1448192).
2015-04-27 10:55:08 +02:00
3084c0aa0b
Eeschema: add missing rotate and mirror sheet in sheet context menu (these transforms were possible in block commands, but not from the sheet menu).
...
Fix a i18n issue in field names when loading a component, if the language was changed during a session, and kicad not restarted (see Bug #1448654 ).
However changing the language needs restarting kicad, in order to have all messages or menus translated.
2015-04-26 18:32:16 +02:00
ad9ec412f5
UI consistency and assertion fixes.
...
* Use "Close" in the file menu of every main frame window instead of the
mismatch of the terms "Close", "Exit", and "Quit".
* Change the terminology in the Pcbnew graphic text edit dialog to match the
module text edit dialog.
* Improve the layout of the Pcbnew graphic text dialog.
* Fix some wxPrintf parameter type assertions for 64 bit time_t.
* Fix all (at least I think I got all of them) duplicate menu accelerator
characters.
2015-04-23 15:43:45 -04:00
20dfe9ca29
Minor fixes: dialog_create_array.* files: clean code ( remove useless declarations and functions ).
...
fix a few coverity warnings about not initialized members in ctors.
2015-04-22 18:39:49 +02:00
e637493e04
Github plugin: Do not hard code https as the URI scheme for GITHUB_PLUGIN.
...
Use whatever comes from the lib_path in the fp-lib-table, thus opening up the same plugin for alternative generic servers.
2015-04-22 14:02:18 +02:00
584f35e6d4
Minor fix in a long message.
2015-04-21 17:53:51 +02:00
ea6b03cd5f
footprint wizard python plugins management: Fix a memory leak. Remove useless and outdated code, and add a minor enhancement.
...
Make a string translatable in a pcbnew info dialog.
2015-04-21 17:42:30 +02:00
53b8a8ca96
Pcbnew: add the board thickness setup in dialog_layers_setup.cpp (mainly for the 3D viewer)
2015-04-20 18:48:31 +02:00
4e210a2d05
ModEdit: fix a refresh issue after deleting a pad (depending on the position of the pad, the pad was sometimes not immediately undrawn).
...
Fix a few coverity wanings (not initialized members in ctors)
2015-04-20 16:59:25 +02:00
016eef39e4
Dialog layers setup: cosmetic enhancements (fix a very minor issue on Windows). Remove a not used and outdated file.
2015-04-19 13:09:35 +02:00
dcdf9066b9
Better handling of disabled layers when editing a footprint (value, ref) from the board editor (avoid the "illegal layer" message box when possible).
2015-04-17 12:24:35 +02:00
d281d86eee
Fixed undo/redo display refresh for miras & dimensions (GAL).
2015-04-17 12:15:07 +02:00
4daf9039db
Eeschema: Fix a very old bug relative to the tool to load power parts:
...
Previously, only the lib named "power" was used (and therefore power parts defined in other libs not shown).
Now, all power parts can be loaded from any library.
Also, when loading power parts from the chose component dialog or the lib viewer, libs and parts are filtered: only power parts and libs containing power parts are listed.
Hotkeys: move a few global strings in the files where ther are actually used (and make them local.) and code cleaning.
Fix a few other minor issues.
2015-04-16 17:26:51 +02:00
d40ea8adcb
3D viewer: fix issues with transparencies in some models (material issues in VRML2 parser)
...
Fix some issues in filling zones normals.
Fix an issue with some models that have materials but didn't defined the diffuse color.
Workaround for Bug #1443431 .
Implement some missing "code logic" for pervertexperface normals.
Remove some not used functions.
Calculate normals using double type.
2015-04-16 09:43:27 +02:00
79af0c454d
2 very minor fixes.
2015-04-14 17:57:07 +02:00
19347b1243
3D viewer: minor fixes. Use our class REPORTER to show warning messages and activity info when building the 3D board view. Add a few comments in sources.
...
Very minor other fixes.
2015-04-14 17:12:35 +02:00
c519eea12b
3D viewer: fix (the fix is not perfect) a minor issue in zone rendering: copper thickness was not good when the option 'Show Holes in Zones" was OFF, and "Show Copper Thickness" ON.
...
Fix a few coverity minor warnings.
2015-04-12 19:44:46 +02:00
cec0a956bd
bugfix: pcbnew segfaults after adding footprint directly from editor
2015-04-11 23:41:22 +02:00
3fc45fb74f
Fix bug where user defined grid change does not update in GAL canvas. (fixes lp:146098)
2015-04-10 19:43:15 -04:00
148ba4302e
Make tab order more sensible for DIALOG_PCB_TEXT_PROPERTIES.
2015-04-10 19:28:25 -04:00
d545c698fb
3D vrml export: fix for bug #1441734
2015-04-10 09:30:21 +02:00
44d6595c6a
Fix swapped M and N in create array dialog string.
2015-04-09 19:41:08 -04:00
ec17455d35
board_items_to_polygon_shape_transform.cpp: remove full duplicate code between DRAWSEGMENT and EDGE_MODULE, and fix incorrect conversion of DRAWSEGMENT polygon type to its polygonal shape.
...
Gerbview: better info from X2 filefunction attribute displayed in layer manager about copper layers
2015-04-09 20:53:36 +02:00
0d77a8600d
Pcbnew: always save the line width of footprint graphic edges in files, to allow width = 0 in polygon outlines.
...
(should not change anything currently for all existing footprints).
2015-04-08 15:45:34 +02:00
0f7e358030
3D viewer: fix a bug introduced in rev 5579s. Remove a few useless wxBusyCursor. Minor other fixes.
2015-04-08 14:50:36 +02:00
78d9e7b789
bugfix: pcbnew crashes when selected component is removed in OpenGL canvas
2015-04-07 18:31:37 +02:00
17297babe7
Eeschema: extend max number of units per package to 52 and clean code to easily extend this value upto 26x26 (but 52 is a reasonable max value).
...
Fix a few minor coverity warnings.
Add about_dialog typo fix from Nick Østergaard
2015-04-07 13:52:29 +02:00
886a8521a4
Comments typos fixed.
2015-04-06 21:50:12 +02:00
7d5ad2785a
Make translatable 'Routing Options...' entry
2015-04-05 18:01:50 +02:00
a7af3346e0
Enable 'Via Gap' setting when respective checkbox is selected.
2015-04-05 16:58:19 +02:00
f25f465d4c
Make strings translatable in Create Array dialog (and a minor cosmetic enhancement).
...
Modview: fix issue about mouse on wrong monitor when starting Modview.
2015-04-05 11:52:41 +02:00
5d55fa018e
Translate Selection tool "Select..." entry.
2015-04-04 21:57:38 +02:00
cbf487c598
Pcbnew: duplicate and create array: popup menus in legacy mode: remove these options for a few items which cannot be (safely) duplicated (pads in board editor, and a few others )
...
Modedit, GAL mode: fix a crash when a duplicated area includes the ref or value fields.
Add missing bitmap for pad enumerate.
fix bad flag for Portuguese language.
Fix a few typo in messages.
2015-04-03 21:10:09 +02:00
4def0958a5
Fix some coverity warnings. Fix typo and errors in comments. Very minor other fixes.
2015-04-03 11:13:06 +02:00
be785d554b
Update GAL ratsnest on canvas switch.
2015-04-02 22:45:19 +02:00
b1cd83c197
Icons in GAL context menus.
2015-04-02 16:09:48 +02:00
6083f3b011
Internationalization of GAL dialogs & menus.
2015-04-02 16:09:26 +02:00
be839aca29
Fixed Footprint Library Wizard for builds with GIthub plugin disabled.
2015-04-02 13:31:29 +02:00
bbbb84e6c2
Fix a few minor coverity warnings.
...
Fix minor 3D viewer issues (includling change number of segments and its optimization to draw pad holes.)
Fix Bug #1439132 (track and via list on toolbar not always refresh after loading a board).
Remove useless tool in Modedit.
2015-04-02 13:18:19 +02:00
589dd442f5
Clippy returns home.
2015-04-02 09:18:45 +02:00
8be73ad05a
KiCad assistant.
2015-03-31 23:45:02 +02:00
c9a917eef1
3d viewer: fix a few warning coverity (and a potential bug). fp libs wizard: make it internationalized, and replace an untranslatable string created by grouping 3 strings by one translatable string.
2015-03-31 13:14:21 +02:00
bfb700c79b
Removed the remaining lines related to WebViewer. Undone reduced number of layer in VIEW.
2015-03-30 22:40:29 +02:00
09f2af3c42
Fixed invisible tracks in PNS.
2015-03-30 21:49:30 +02:00
7f1ea9e54d
New Footprint Library Wizard.
2015-03-30 18:42:39 +02:00
9e8719d3ff
Fixed overlapping segment endings in OpenGL view.
2015-03-30 14:09:56 +02:00
45d0448bb9
Add path (environment variable) configuration dialog.
...
* Create new dialog to edit environment variables.
* Add helper class ENV_VAR_ITEM to manage environment variable values and
if they were defined externally.
* A path configuration dialog access to KiCad, CvPcb, Pcbnew, and Footprint Editor
window menus.
* Add validator for environment variables.
2015-03-29 17:22:53 -04:00
26990213db
3ED viewer: added more support for the VRML2 parser
2015-03-28 17:16:40 +01:00
ec4d74c984
Minor 3D viewer improvements (fixes lp:1406680).
...
* Make OK button the default action in the 3D viewer option dialog per UI
policy.
* Fix standard button sizer padding in 3D viewer options dialog.
* Let sizers do their job by using default size for 3D viewer options
dialog.
* Set 3D viewer hot key to Alt+3 in all parent windows where 3D viewer is
accessible.
* Minor code cleaning and coding policy fixes.
2015-03-26 15:04:52 -04:00
45808deb47
Minor fix: Gerber X2 attribute: remove one attribute (TF .GerberVersion, now no more in use) I added in my recent changes relative to the new J5 gerber version attributes.
2015-03-26 19:57:19 +01:00
bb50e141f4
Pcbnew: Force visibility of items which have no option in dialogs to controle this visibility, when reading the .kicad_brd file.
...
these options are used in GAL mode, but the usercannot control this visibility. So if the board file does not have these visibility flags set, the GAL never show them.
Fix also a compil warning.
2015-03-26 14:20:11 +01:00
85bc2ae015
Rework on Gerber plot functions: add X2 attributes in J5 version. Minor code cleaning.
2015-03-25 14:07:05 +01:00
0b7fd874a0
Fixed printing issues under Linux.
2015-03-25 10:55:00 +01:00
ec8bf0c13a
Library configuration menu naming improvements.
...
* Add footprint and drop table from the Pcbnew footprint library table menu
entry to make it clear to new users.
* Add component to the Eeschema library configuration menu entry.
2015-03-23 11:44:19 -04:00
74154480de
Eeschema enhancements: Option to annotate keeping multi-unit parts grouped and friendlier warning for modifying power values.
2015-03-23 12:45:31 +01:00
9c43d6f22b
Very minor fixes: 3D viewer: remove artifacts with NPTH pads having the save size as their hole. Kicad: remove duplicate submenu in menubar. remove a minor coverity warning
2015-03-23 09:28:12 +01:00
0e03fbff07
Make hotkey string info translatable in dialogs. These strings are now prefixed by _HKI , which can be used by translation tools to extract them.
2015-03-22 15:04:09 +01:00
0350290499
Fix Bug #1426675 (Undo and cancel commands don't have effect for Duplicate operation in legacy mode)
2015-03-22 10:42:41 +01:00
6e8a8a6b25
Fix some coverity warnings (mainly not initialized members)
2015-03-21 10:06:04 +01:00
834b31b491
Plot pdf: fix issue when a 0 sized text is plotted (files are broken): now 0 sized texts are ignored.
...
pcbnew: remove a false error message when undoing a change on a text, or some other board items (graphic items for instance)
2015-03-18 20:50:42 +01:00
eef494d9c5
Pcbnew: Fix an Incorrect save-on-quit in pcbnew with unamed board
2015-03-17 08:34:02 +01:00
115cb2d647
Try to fix Bug #1431765 (Pcbnew crashes in GAL when entering 3d display when a board outline is not closed)
...
This change modify the way warning messages are displayed: now the are displayed outside a paint event.
2015-03-16 18:39:35 +01:00
900ecbae9d
Fix for cancellation of duplicate in GAL mode.
2015-03-16 10:25:40 +01:00
5c26381963
Pcbnew: Fix Bug #1432370 (Solder mask cutouts extended by "Zone min thickness value")
2015-03-15 16:11:14 +01:00
797ff5eeb7
Better icons for diff pair routine menus
2015-03-15 15:22:37 +01:00
efe5658a9b
Fix bug Bug #1432165 (fp lib table dialog editor not shown on XFCE and Unity)
...
Cvpcb: Shows a better message when a netlist is not found.
2015-03-14 17:47:25 +01:00
f743b98844
Try to fix Bug #1431391 (Unable to edit pins in Schematic library editor). It happens on XFCE, but also on Unity. This fix works on Unity. (it is due to the fact the dialog is not raised, for an unknown reason, and this bug depend on the way Eeschema and Libedit are run).
...
Add Ctrl+E hotkey in eeschema to edit a component with Libedit (similar to pcbnew Ctrl+E hotkey)
As usual, fix a few minor coverity warnings
2015-03-14 12:50:39 +01:00
adf2fc830e
Pcbnew, legacy mode: add Hotkey for editing module with module editor (Ctrl-E)
2015-03-14 08:43:36 +01:00
cbb0e2ad35
Rework on 3D viewer. Fix some issues, some optimizations and better rendering.
2015-03-13 20:27:25 +01:00
9004ed8801
Remove a few coverity warnings. Fix some comments which were incorrect, due to the changes in code. Remove not compiled code (kept as comments), now outdated or useless
...
legacy plugin: better compatibility with old brd files (current track width and current vias size, stored in SETUP section, were not read from file and incorrectly set)
2015-03-13 17:48:42 +01:00
2427b40271
Fix Bug #1431423 (pcbnew: edited 3d model filename is not saved).
...
Eechema, libedit, pin dialog editor: show pin texts in pin preview canvas.
2015-03-12 18:43:39 +01:00
aeddbb51ff
router: respect NPTH holes too
2015-03-11 23:48:53 +01:00
e9bc7b58cc
Snap cursor to pad center when moving (GAL footprint editor).
2015-03-11 18:06:44 +01:00
b3b791961a
coverity common folder fixes (mainly not initialized members).
2015-03-11 17:04:20 +01:00
f16e083ecf
Fix minor bug #1429990 (3D viewer shows hidden footprint graphic texts ). Fix minor coverity warnings (not initialized members and dead code)
2015-03-11 14:59:43 +01:00
b6c5b291a2
Coverity fixes.
2015-03-11 14:17:43 +01:00
c586d9735e
Eeschema: fix bug #142970 (broken append sheet function)
...
Fix a few minor coverity warnings.
2015-03-10 19:31:21 +01:00
035b231b62
Refinement for fix in 5497.
2015-03-10 18:31:23 +01:00
2ecb72da84
Fixed disappearing selected items when switching between GAL canvases.
2015-03-10 17:05:38 +01:00
26f20fbb00
Moved "Place Target" and "Place Module" tools from DRAWING_TOOL to PCB_EDITOR_CONTROL (to avoid placing modules in the footprint editor).
2015-03-10 16:58:26 +01:00
721949b50e
Fix memory leak in pns_node and pns_line_placer. Fix coverity uninitialized warnings.
2015-03-10 15:38:27 +01:00
97e4a3897c
Minor fix to ratsnest algorithm (GAL).
2015-03-10 15:02:27 +01:00
c160a7de17
Capturing cursor in drawing tools (GAL).
2015-03-10 14:43:14 +01:00
cc72e585f0
Fixed segfault in arc drawing tool (GAL footprint editor).
2015-03-10 14:32:40 +01:00
56b692ae3e
"Select net/connection" (GAL).
2015-03-10 09:36:04 +01:00
190af5d95b
Added functions to resolve connectivity queries in ratsnest (GAL).
2015-03-09 13:41:34 +01:00
e6a10faab7
FIxed a few clang warnings.
2015-03-09 11:06:54 +01:00
c9b9ccd2b6
Fix issue #1429665 (eeschema doesn't recognize .sch file when the LIBS section is empty. But the section is not used, just a comment, therefore can be empty).
...
Very minor other fixes.
2015-03-09 10:25:39 +01:00
086ff54ef0
Fix minor issues: plot svg did not handle dashed lines.
...
Eeschema now uses dashed lines for graphic lines (to be consistent with plot functions and toolbal icon).
Fix an old bug in some envionments which warp the mouse on a bad monitor when opening eeschema, pcbnew and some other windows, only noticeable guys who are lucky enough to have more than one monitor.
2015-03-06 18:46:04 +01:00
c3e3ff3682
Minot fixes: Minor coding style issues fix (tab -> spaces). Add missing GetClass to all classes derived from EDA_ITEM. Make debug method Show() only compiled in debug mode.
2015-03-06 09:58:32 +01:00
435ca8a7dd
router: fix tuning status popup & incorrect length display
2015-03-05 10:02:29 +01:00
504c8bf286
router: fix segfault on misnamed DP complementary net
2015-03-05 10:01:54 +01:00
6a016742c9
Fix a typo.
2015-03-04 21:08:57 +01:00
d13912c26a
Fix bug in gEDA footprint library parser and OpenSSL version CMake file. (fixes lp:1427917)
...
* Fixed incorrect parameter ordering in gEDA footprint library parser
which read drill diameter, pad clearance and solder mask clearance.
* Fix FindOpenSSL.cmake version detect bug which was exposed by OpenSSL
version 1.0.2.
2015-03-04 14:46:06 -05:00
8cc70d4468
Refinement to the previous commit.
2015-03-04 20:22:33 +01:00
63ae839489
Fix for uninitialized length tuning status popup.
2015-03-04 20:08:30 +01:00
a550ff84db
Fix some coverity and cppcheck warnings (most are very minor issues: not initialized members and initialized but not used variables)
2015-03-04 10:26:00 +01:00
5f1c9060ac
P&S router: fix unguarded boost optional derefernce. (fixes lp:1427880)
2015-03-03 20:16:14 -05:00
b580ef70c5
Fix segfault in P&S router.
2015-03-03 15:58:36 -05:00
7977ac5421
Fix double free in P&S router causing KiCad to segfault. (fixes lp:1427803)
2015-03-03 15:07:56 -05:00
c7d04c3d08
Code cleaning: Remove EDA_BASE_FRAME::m_FrameName member which is a duplicate of wxFrame name.
2015-03-03 15:53:47 +01:00
9716165d06
Merged the differential pair router & track length tuning tool.
2015-03-03 13:41:43 +01:00
a6bd3314e4
Fixed warnings.
2015-03-03 12:59:26 +01:00
161b360297
Fixed frozen cursor (GAL).
2015-03-03 11:55:23 +01:00
0dd9efd9db
Merged the differential pair router & length tuning tool.
2015-03-03 11:50:50 +01:00
385d3648d6
router: removed some printfs()
2015-03-03 10:36:44 +01:00
2804d2e566
Add hotkeys to Kicad manager, and some rework on hotkeys management.
2015-03-02 18:29:18 +01:00
fe40567426
router: shove now respects diff pair gap
2015-03-02 17:21:04 +01:00
bf3128c683
router: fix syntax error in PNS_LOGGER output files
2015-03-02 17:20:48 +01:00
399ab4baa4
Footprint editor: set the default footprint text size to 1 mm. Minor cleaning code. Very minor other fixes.
2015-03-02 16:59:03 +01:00
4bab8dde65
Fix some minor coverity warnings. Fix a bug in pcad2kicad plugin. Scripting: map BASE_SET. Rename some python bom scripts with better names. Fix erroneous comments and add comments
2015-03-02 09:28:49 +01:00
25b9a42ea3
More Coverity scan error fix goodness.
2015-02-28 15:50:35 -05:00
873e0740e8
Fix bug in footrpint editor when creating circular arrays. (fixes lp:1424331)
2015-02-28 12:39:05 -05:00
2101324691
Fix wxGTK scrollbar assertion in Pcbnew layer setup dialog.
2015-02-28 11:48:39 -05:00
d6c6b4debb
Fix some coverity warnings (mainly not initialized vars).
2015-02-27 15:33:13 +01:00
30acc07e11
Default path fixes and remove old to find 3D model path code.
...
* Fix default KISYSMOD/KISYS3DMOD (#ifdef typo) for OSX builds.
* Remove setting KIGITHUB from kicad/pcbnew Info.plist in favor of hardcoded default
setting for OSX builds.
* Remove now unneeded Set3DShapesDefaultPath() and other small things.
2015-02-27 08:34:02 -05:00
3f015705ac
working on shove fix for DPs
2015-02-26 16:34:10 +01:00
10d67ffbd9
Fix some coverity warnings (not initialized members). Add comments. Better (more informative) title in dialog to download .pretty libs.
2015-02-26 11:33:15 +01:00
dbdadbf519
Fix someminor coverity warning, and one bug found by coverity in drill report files : buried holes were not properly counted and listed.
2015-02-25 20:43:37 +01:00
ede0daf9db
lib_dxf: Update to version 0.5.13 (previous: 0.5.11) due to a bug (memory leak) fixed in 0.5.13, which has also more comments, and try to fix most of coverity warnings (not initialized class members).
...
These members are now initialized, which also fix some other more serious coverity issues.
2015-02-24 10:07:40 +01:00
feb14fa37d
pcbnew, place file: Fix a minor bug in side identification: a comment in file header was generated with always "top side" id even when the bottom side file was created. Fix also a minor coverity warning (no bug)
2015-02-23 14:03:20 +01:00
1e6c8cf88f
Enable file extension filters on OSX file dialog.
2015-02-22 17:48:33 -05:00
4c6ca81f2c
More Coverity scan error fixes.
2015-02-22 16:25:29 -05:00
7e80e7207c
Pcbnew, Footprint place file: use standard keywords "top" and "bottom" as board side identifiers instead of external copper layers names, which have no meaning in this fabrication file
2015-02-22 16:42:13 +01:00
0975e3e5bd
Move exact dialog: make all messages translatable. Fix minor issues (some can be Windows specific). Remove useless declarations. Fix coding style issues
...
Fix minor warnings from cppcheck.
2015-02-22 15:43:44 +01:00
c1978b3242
Pcbnew: fix crash when undoing a move exact pad in board editor.
...
Fix also very minor warnings detected by cppcheck.
2015-02-22 10:39:58 +01:00
014905e7db
bugfix: pad enumerator skips pads if mouse cursor is moved too fast (GAL module editor).
2015-02-21 21:16:28 +01:00
de03accdb1
Coverity report fixes.
2015-02-21 14:58:39 +01:00
3918d3f0b2
Eeschema code cleanup and coverity fixes.
2015-02-21 09:11:58 +01:00
d1d1e2b58a
Lots of Coverity scan error fixes.
2015-02-20 19:41:10 -05:00
bd5d468251
Pcbnew: fix bug #142348 (airwire does not always appear after deleting a track). Very minor other fixes.
2015-02-20 20:04:32 +01:00
3e9bb6b887
SELECTION::GetCenter() returns VECTOR2I instead of wxPoint.
2015-02-20 11:40:36 +01:00
c2bd2491f1
Added asserts in spots where DEGREES are not handled.
2015-02-19 16:03:45 +01:00
84517d0e79
BOARD::DuplicateAndAddItem() handles vias too.
2015-02-19 14:55:46 +01:00
f7a32e839e
Moved UndoInhibit related functions from TOOL_MANAGER to EDIT_TOOL.
2015-02-19 14:53:31 +01:00
aafdfd015e
Disabled 'Duplicate' & 'Create array' for pads in the layout editor.
2015-02-18 20:30:14 +01:00
9bed4814a3
Ratsnest update in 'Create array' tool (GAL).
2015-02-18 20:29:52 +01:00
f06690c8d3
Merged lp:~john-j-beard/kicad/moveexact.
2015-02-18 20:27:00 +01:00
4fb9bce354
Code formatting.
2015-02-18 17:53:46 +01:00
63d3c835cb
Pcbnew: refinement to Bug #1422093 fix.
2015-02-18 10:13:17 +01:00
112adccbcb
router: differential pairs & length tuning support
2015-02-18 01:29:54 +01:00
e5deafb4bb
bulk improvements for selection and edit tools (GAL) disambiguatin heuristics and smarter grid alignment
2015-02-18 01:10:20 +01:00
a46a92f918
new IDs for diff pair & length tuning tools
2015-02-18 01:06:14 +01:00
9f0b02268b
tools: moved tools registration outside pcbframe.cpp
2015-02-18 01:04:47 +01:00
4da839f30f
groundwork for invoking module editor on selected footprint in GAL mode
2015-02-18 01:01:02 +01:00
da9fc84421
improved module locking: lock pads only/lock whole module mode added
2015-02-18 00:58:14 +01:00
5d78a007cc
added ClassOf() for DRAWSEGMENTs, PADs and PCB_TEXTs
2015-02-18 00:53:57 +01:00
0879b457ac
undo should work on pads too (GAL view)
2015-02-18 00:51:40 +01:00
6312f8386a
Temporary fix a crash I created in rev 5427, when erasing all modules on a board and read the netlist. Will be fully fixed later.
...
Very minor fixes: remove duplicate #define in vrml_v2_modelparser.cpp, and "undo" a very minor change I made in class_board.cpp when I tried to fix a Pcbnew crash.
2015-02-17 21:32:49 +01:00
f4d5e349bf
Fix a bunch of Coverity scan "unhandled exception" errors.
2015-02-17 13:47:21 -05:00
39497b109e
Pcbnew: fix Bug #1422093 (pcbnew crashes after editing a footprint cominng from the board with the fp editor and saving it on a librray and trying to load it to the board)
...
Some other very minor fixes.
2015-02-17 17:32:47 +01:00
dcdaee4c63
Pcbnew IDF and VRML exporter Coverity scan error fixes.
2015-02-17 09:56:45 -05:00
f2edf02b35
Coverity error fixes.
...
* Fix unitialized variable in MSG_PANEL_ITEM default ctor.
* Fix a bunch of uncaught exception issues.
* Fix a memory leak in the NETLIST_READER::GetNetlistReader() when an
an attempt to read an invalid net list file occurs.
2015-02-15 19:04:48 -05:00
b0ad779ee4
Calming down the Coverity report.
2015-02-15 23:21:52 +01:00
1e2af7fed1
Add GetLayerID method to BOARD.
...
This method is added for scripting purposes, to be able to query
specific board layer names thru a board object.
If no board specific layer name is found, it will fallback to
standard layer names.
2015-02-15 14:31:47 +01:00
b1ace1607b
Reworked GAL switching.
...
Now OpenGL can report its problems instead of shutting down the application.
2015-02-15 02:18:35 +01:00
b19010ff8b
Cross-probing pcbnew<->eeschema (GAL).
2015-02-14 21:52:22 +01:00
bb861b81b2
Missing comments in the PLACEMENT_TOOL class.
2015-02-14 21:49:06 +01:00
902d0e3f1f
Tools are processing const TOOL_EVENT& (Tool Framework).
2015-02-14 21:28:47 +01:00
69553d6fa3
wxPython find and version loading fixes. (fixes lp:1408060)
...
* Add test to CMakeLists.txt to verify wxPython is installed when
KICAD_SCRIPTING_WXPYTHON=ON.
* Add test to make sure wxPython version major and minor numbers match
the version of wxWidgets found.
* Add code to set the correct version of wxPython to the python scripting
initialization code.
* Minor code simplification in Pcbnew KIFACE main window creation.
2015-02-14 19:23:54 -05:00
1a74913063
Minor fixes: fix issue Bug #1420910 (Linux specific).
...
Rename eeschema/dialogs/dialog_sch_find.fbp to dialog_schematic_find_base.fbp, to be consistent with other dialogs.
Pcbnew run from the project manager: add menu Save Copy As..., which is the same command as Save As ... in stand alone mode, but with the constraints of a project (no cwd change, no board filename change, and keep project settings)
2015-02-14 13:43:11 +01:00
d7f96d37a4
Add Fit() call to move exact and create array dialogs
2015-02-12 03:22:24 +00:00
8c6313ac1a
Extend arrays and duplicate to pcbnew (GAL and legacy), covering modules, text, lines, tracks, dimensions and targets.
...
Text arrays can now use "%s" as a placeholder to be substituted with the array index.
Also expand menu options for move exact, arrays and duplicate.
Minor fixes for arrays - use proper unit parsing, add numbering start for circular arrays
Add circle radius indicator to array dialogue
2015-02-12 03:22:24 +00:00
3c5f3f7049
Add create array tool
2015-02-12 03:22:24 +00:00
4f3672da4d
Add "move exact" and "duplicate" tools to pcbnew
2015-02-12 03:22:24 +00:00
74e83e924a
Pcbnew: Fix Bug #1420074 (Crash when a footprint is added to the board (or edited) from the footprint editor, if a new pad was added, because the net info of the new pad is broken in this case)
2015-02-11 11:10:53 +01:00
698bd331c4
Dialog enum pads: fix incorrect use of sizers.
2015-02-10 11:38:22 +01:00
80f6a4f2a0
Pcbnew: fix ver minor issues. ModEdit: fix issue in GAL mode: when importing a footprint from the footprint wizard, the new footprint was not shown.
2015-02-10 09:35:17 +01:00
07db7c8d29
Prevent Pcbnew edit graphics property dialog from excepting zero length objects. (fixes lp:1392117)
2015-02-06 16:49:40 -05:00
d52436aed8
Pcbnew: fix Bug #1418135 (scrollbars never shown in design rules dialog, in netclasses grid list, which prevent to use many netclasses). Also fix very minor other issues.
2015-02-06 11:54:55 +01:00
4265fa60bd
Pcbnew - plot dialog: fix Bug #1417435 (Gerber(and some others) plot mode is fixed as”sketch” instead of "filled" )
2015-02-03 11:35:46 +01:00
5eb7b41fba
Dialogs edit footprint in module editor and edit footprint in board editor: add button to edit the selected 3D shape filename.
...
Dialog edit component in library editor: add button to edit the selected footprint filter.
2015-02-02 17:43:34 +01:00
b1cd42cf08
Pcbnew: simplify draw code in default canvas and plot functions by removing the plot LINE option, which is not existing in all plotters, not existing in opengl/cairo canvas, and not usefull in default canvas.
2015-02-02 09:06:39 +01:00
3c343b415a
Fix the minor bug 1016924 ( Unhandled event id 6263 in pcbnew ). Remove duplicate code.
2015-02-01 08:19:31 +01:00
8412f2ad4e
ModEdit: add a settings menu option(and the corresponding dialog) to set default values used when creating a footprint or add graphic items to a footprint being edited.
...
These settings are now not common to the board editor, because the footprint editor can be run outside the board editor.
download_boost.cmake: ignore .htm* files when installing boost. They are not used, and often have a very very long (and stupid) name which sometimes creates issues.
2015-01-30 19:42:46 +01:00
789bb9663c
bugfix: Find does not work in high contrast mode in GAL.
2015-01-29 18:23:54 +01:00
b556fb2324
Class BOARD: Rename an overloaded method named SetLayer with the better name SetLayerDescr, and comment it. It also remove some warnings when compiled with option -Woverloaded-virtual
2015-01-29 17:01:48 +01:00
ba6e2ffbcf
Footprint Editor: New footprint creation: change defaults for ref and value texts: now Ref text is REF** and Value text is the footprint name. Also Value is put on fab layer (front)
...
muonde.cpp: cleanup this very old code, and fix not working code.
2015-01-28 11:00:48 +01:00
2a4d0bad60
Fix minor aesthetic issues in dialogs (these minor issues (overlapping widgets) exit only with some Windows managers like KDE)
2015-01-27 08:34:19 +01:00
2647fdfd89
Fixed context submenus event handlers (GAL/Windows).
2015-01-25 19:11:02 +01:00
5447bb5914
bugfix: Pcbnew (Windows) crashes using selection tool in OpenGL or Cairo
2015-01-25 19:08:52 +01:00
f0a52644ea
Pcbnew: fix Bug #1413701 (Segfault on highlight "unconnected" net 0 in Pcbnew ). Also, remove now useless code and other very minor fixes.
2015-01-23 12:24:32 +01:00
ca065833ea
Remove EDA_DRAW_FRAME::IsActive() and replace with wxFrame::IsActive().
2015-01-22 08:42:24 -05:00
ebb967c46f
Pcbnew: fix issues and potential issues when reading board files and mainly old board files, and enhance the DRC tests and Delete Single Pad Net option when reading a netlist:
...
* Delete Single Pad Net option does not delete the net if a zone use this net (i.e. is attached to this pad).
* pcb_parser accept now negative netcodes in zones (can happen with old files, which previously could crash Pcbnew)
* pcb_parser accept now files with incorrect or missing net count (can happen with old files, which previously could crash Pcbnew)
* if a zone has a non-existent net name it now keep this net name, and DRC detect it (previously, the net name was lost, and the DRC did not tected this issue).
* Drc test: now detect a "dead" net, i.e. a net with 0 pads, but still used by a zone. It happens easily after a schematic modification, when a net disappears or is renamed.
2015-01-22 13:06:34 +01:00
59f497978a
Pcbnew, layers manager: Fix an annoying bug I added in rev 5359, in Render options: in Board editor many render options were not displayed (similar fp editor mode).
...
Now fixed.
2015-01-20 08:01:32 +01:00
d4e04dcc97
Fix bugs detected by Cppcheck.
2015-01-19 20:03:50 +01:00
79e2a41469
Pcbnew: Fix potential bug in DRAG_SEGM_PICKER (a variable type bool was used as int. type is now int). Minor code cleanup.
2015-01-19 09:23:10 +01:00
8876fdf4af
Misc minor fixes (Fix some minor compil warnings).
2015-01-18 12:49:32 +01:00
ac539b9578
Minor and very minors fixes: move -DKICAD_USE_WEBKIT definition to the main CMakeLists.txt. Remove duplicate semi-colon at end of some lines.
2015-01-17 09:01:16 +01:00
92a8f8f19c
Support for zone cut-outs in the point editor (GAL).
2015-01-16 16:44:42 +01:00
c27b2fbf4c
Fix issues in fp lib table wizard
2015-01-16 09:10:23 +01:00
0b1a6fd7c3
More work on fp lib table wizard: add a button to import the full list of .pretty libs on github.
...
* if the current select plugin is the github plugin, one can select some of these libraries and add them to the table
* if the current select plugin is the kicad plugin, one can select some of these libraries and download them to make alocal copy.
They can added to the table after they are downloaded.
2015-01-15 21:01:53 +01:00
b269128b8c
Fixes issues with IDF file I/O on Windows (the famous 'ascii vs. binary' issue) and the reported problem of partial paths when KISYS3DMOD is specified.
2015-01-13 11:47:07 +01:00
0b6d1bbcf7
Minor dialog improvements.
...
* Make generate button the default in Eeschema netlist dialog.
* Fix spacing issues in export IDF dialog.
* Make OK button the default in export IDF dialog.
* Remove unnecessary end dialog code from export IDF dialog.
* Improve resizing of export IDF dialog.
2015-01-12 14:25:20 -05:00
0cb7c3dc7d
ModEdit: fix incorrect size of the toolbar grid size combo box
2015-01-10 12:08:12 +01:00
9cfb97d8b4
Add hight contrast option in Modedit. In hight contrast mode, solder masks and solder paste are shown.
...
this option was possible only by modifying the way display options are managed.
before these changes, display options were a global DISPLAY_OPTIONS class instance.
Now each EDA_DRAW_FRAME(and derivated classes) includes its own DISPLAY_OPTIONS class instance.
As a consequence, some duplicate display option variables in these classes have been removed, because there were just duplicate variables of the DISPLAY_OPTIONS class instance.
2015-01-10 11:27:49 +01:00
7d8df0425f
Modedit: now shows a specific layers manager, which allows user to select the technical layer which is used when adding a new graphic text or outline to the current footprint.
...
Please, note the layer manager was already available in GAL mode, but is was the same as tne board editor, which is not good.
Now:
- In default mode or GAL mode, the look is the same.
- Only suitable technical layers (i.e. paired layers) are selectable from the layers manager (for special purposes, some other layers can be used, via the graphic items properties dialog)
2015-01-07 20:07:15 +01:00
678a763481
Pcbnew: better display of tracks/vias/grid in toolbar. All: modify the zoom value shown in toolbar or status bar (roughly now zoom 1.0 is near the 1:1 scale, on a 22 inches Monitor). Fix also many other minor and very minor issues
2015-01-06 08:38:58 +01:00
f5059ec4c2
Fix duplicate text in IDF header export. (fixes lp:1407336)
2015-01-05 16:51:47 -05:00
a2129fcd39
Minor toolbar and menu coherence fixes.
...
* Change Read to Load in Pcbnew and Eeschema preference menus.
* Make electrical rules check status bar message the same for both the menu
and toolbar entries.
2015-01-05 16:01:35 -05:00
ad74a9a191
Pcbnew: better display of tracks/vias/grid sizes in toolbar
2015-01-05 14:20:04 +01:00
036a7cd8ed
Fix a typo error in wizard lib.
2015-01-04 12:50:12 +01:00
6a19315557
Fix compat with swig 3.03
2015-01-04 08:19:04 +01:00
846b2ae24e
Fix Bug #1381287 (CvPCB ignores the footprint filter field on aliased components)
2015-01-02 08:52:29 +01:00
9aa4fb6955
Cvpcb: force project name in stand alone mode, to allow access to project fp lib table. In project mode: disable the read netlist option (the netlist is read when Cvpcb is started by eeschema)
...
Dialog fp lib table editor: now shows the table full filenames, to help users.
2015-01-01 16:46:11 +01:00
6ba5e40669
Fix a minor issue in fp lib wizard.
...
Remove a duplicate code for dialog select dir list.
2015-01-01 12:37:23 +01:00
605a9bb5f2
Page layout selection: fix Bug #1405972 , and add minor enhancement in page layout selection dialog (the new layout is shown after selection).
...
When the filename is not absolute, the page layout file is now searched first in project folder, and then in kicad template folder, if not found in project.
2014-12-31 13:31:19 +01:00
de8ae428fd
Minor fixes (typo in messages)
2014-12-30 18:15:46 +01:00
fcbce8b60e
Add KIGITHUB definition for stand alone version of Pcbnew on OSX
2014-12-28 17:07:15 -05:00
0ceb90dfe1
Fix bug in IDF exporter when circles and arcs have zero radius. (fixes lp:1371656)
2014-12-28 10:09:35 -05:00
a5972e7b48
Fixed crash on toggling the pad outline display mode in CvPcb.
2014-12-26 18:07:45 +01:00
bc230f7650
Code cleaning: move class PAGE_INFO from common.h to class_page_info.h;
...
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
2014-12-23 14:01:59 +01:00
21cc8e0dc0
Freeroute dialog: remove freeroute access via java web start, because freeroutecanot be run now via java web start.
...
freeroute.jarcan be run by Kicad, as long freeroute.jar is found by Kicad (for instance if it is in kicad bin folder)
2014-12-22 17:58:43 +01:00
e4a74213e4
Add wizard to fp lib dialog to easily add entries to this table.
2014-12-21 15:13:14 +01:00
05073c15ed
Add option to VRML Export for Plain PCB (patch from Cirilo Bernardo)
2014-12-20 17:13:51 +01:00
41e044c0b4
Handle arcs in board outline in Eagle pluging.
2014-12-19 17:02:02 -05:00
bb7a74f58f
Pcbnew: fix Bug #1404191 (Zone filling fails when a zone inside having the same net and a highter priority exists, which is allowed to manage different fill parameters )
2014-12-19 20:09:53 +01:00
6deb3823d7
Aesthetic enhancements ( use few svg icons from Konstantin Baranowskiy).
...
Allows use of modifier shift key with letters A ... Z in hot keys (including hot key editor). Thanks to John Bird, who helped me with his patch.
2014-12-18 19:53:19 +01:00
d83eb11aa6
Minor fixes. Remove unused icon. Add 3 new icons. Change one icon (3 icons are from Konstantin Baranowskiy)
2014-12-11 13:00:59 +01:00
1df31338a3
Shortcut for fill all and unfill all zones for GAL.
2014-12-08 23:41:47 +01:00
de4e688b83
Imporve hot key name description. (fixes lp:1066193)
2014-12-07 14:10:12 -05:00
33f39fc282
Fix Eagle footprint library import of arcs. (fixes lp:1399745)
2014-12-07 12:07:05 -05:00
e373850d26
Add remove fill and fill all zones hot keys.
2014-12-06 16:21:13 -05:00
0e996cac9e
Pcbnew: fix Bug #1395594 (pcbplotparams parser sensitive to formatting)
...
Looked like a minor issue, but was due to a more serious bug, when using 2 different DSN_LEXERS which were not synchronized.
The fix is not perfect, but unfortunately, the parser used to read the PCB_PLOT_PARAMS in .kicad_pcb files is also used in legacy board file reader.
Therefore it is better than write 2 parser functions, one for legacy files, the other for the .kicad_pcb files, which make the same thing.
2014-12-04 20:15:26 +01:00
f3765a32d8
Fix minor issues. Fix some outdated and broken BOM python scripts. Add info in BOM python scripts.
...
BOM dialog: remove a not very useful button, and merge its function with an other (not perfect, need more work)
Add message box to show info added in BOM python scripts (See scripts/bom-in-python/README-bom.txt about this info)
2014-12-03 17:22:06 +01:00
479af2a7a8
Pcbnew, export Solder masks in Gerber Format: fix not working export when the solder mask minimal width is not 0 (the exported shapes were the same as if the vule = 0) with boost version >= 1.56
...
This is due to the fact the boost::pylygon function resize ( a inflate/deflate function) used for calculations does not work with boost version >= 1.56.
Use Clipper inflate/deflate function instead. It is faster and works fine.
2014-12-01 15:54:33 +01:00
25a801ed8a
Modify usage of Inflate/deflate polygon in zone calculations, in order to be compatible with boost::polygon >= 1.56
...
Some code cleanup.
2014-11-30 18:07:02 +01:00
4bba4b875d
Pcbnew: Allows trapezoidal pads in zones.
2014-11-29 13:58:34 +01:00
e6ff6af7b3
Fixed typo.
2014-11-27 11:51:16 +01:00
0daa1fa67e
Missing fixes for the revision 5301.
2014-11-27 11:47:17 +01:00
6c4808bd49
pns: Non-copper pads are not treated as obstacles.
2014-11-26 15:46:47 +01:00
03f7003c00
pcbnew: Unconnected items share the same NETINFO_ITEM, even if on different boards.
2014-11-24 16:34:47 +01:00
0c1a87ca56
selection_tool: Added SelectItem and UnselectItem actions.
2014-11-21 11:50:13 +01:00
823623acb8
selection_tool: Renamed deselect* to unselect* for naming consistency.
2014-11-21 11:49:54 +01:00
62e2537e73
selection_tool: Renamed selectSingle to selectCursor.
2014-11-21 11:49:28 +01:00
1e5fa54d1a
Try to fix an issue on Ubuntu/Unity for some dialogs which are not displayed. Adding GetSizer()->Fit( this ) after last dialog "geometry" change (size for instance) or Raise() if the window is not a dialog fix it.
...
Partial fix. There are few cases where the frame is still not displayed.
Looks like a Unity issue, not a Kicad issue.
2014-11-19 20:13:10 +01:00
149a04f331
Fix crash in footprint editor when SMD pad diameter is zero. (fixes lp:1378917)
2014-11-19 13:39:02 -05:00
8a1c8a91f4
More fixes on Ubuntu/Unity for dialogs which are not displayed.
2014-11-19 18:13:55 +01:00
1ebaf1371a
Fix remark 1 in Bug #1393277 (the option "use absolute paths" acts reversed: ticked exports relative paths, unticked exports absolute paths)
2014-11-17 14:55:26 +01:00
1dc5178095
Message panel consistency improvements and coding policy fixes.
...
* Make title capitalization consistant.
* Replace some instances of module with footprint.
* Use angle instead of orientation where appropriate.
* Remove abbreviations where it made sense.
* Coding policy fixes.
2014-11-15 14:06:05 -05:00
5729ee7ea5
Compile warning fixes and minor code policy fixes.
2014-11-15 08:43:23 -05:00
71e5fb13e6
Segment message panel infromation improvements.
...
* Make "Drawing" string translatable.
* Add segment length to message panel.
* Add segment angle to message panel.
2014-11-15 08:09:59 -05:00
9245b90392
Code formatting.
2014-11-14 20:19:00 +01:00
4e280f065f
P&S router: fixed shove force propagation incorrect issues causing improper via dragging.
2014-11-14 19:17:52 +01:00
4e67de5c15
P&S router bugfixes
...
- fixed walkaround bug causing unwanted overlap/clearance violation when the first segment of trace being laid intersects the obstacle's hull at the same point twice (ie. goes in, turns around and goes out).
- fixed placer bug not splitting the start segment after toggling via placement or changing trace width
2014-11-14 19:17:01 +01:00
80adf9d85b
router: multiple changes
...
- re-worked PNS_LINE_PLACER and PNS_ROUTER classes a bit, removing duplicate class members
- cleaned up Andrew's blind/buried via fixes
- fixed 'custom via width' dialog bug updating the width even when closed/cancelled
- fixed incorrect radius of drawn microvias
2014-11-14 19:15:58 +01:00
32eb568ec4
Pcbnew place track menu entry hot key text fix.
2014-11-14 11:09:07 -05:00
unknown
jean-pierre charras
Maciej Suminski
Tomasz Wlostowski
Jonathan Jara-Almonte
Mathias Grimmberger
Eldar Khayrullin
unknown
Jon Neal
Marco Hess
Chris Pavlina
unknown
J. Morio Sakaguchi
unknown
Henner Zeller
Wayne Stambaugh
Simon Schubert
unknown
unknown
unknown
Nick Østergaard
Mikhail Karpenko
Sven D.
https://launchpad.net/~john-j-beard
John Beard
unknown
Blair Bonnett
Bernhard Stegmaier
Miguel Angel Ajo
unknown
Fat-Zer
Paul LeoNerd Evens
Camille