2459b61aa6
Don't add second half of line and new juction to screen twice.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13129
2022-12-12 13:44:47 +00:00
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
5b2020daf5
Schematic: only delete dangling lines not created directly by the user
2022-12-01 13:13:45 -05:00
01cf6d76d8
Remove newly dangling lines when dragging
...
These lines are remnants from drag operations that should be cleaned
after commiting the new line positions
Fixes https://gitlab.com/kicad/code/kicad/issues/12870
2022-11-30 13:46:38 -08:00
7e0ba42f0e
Bug fixes for dragging labels attached to wires in orthogonal mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12677
2022-11-25 15:05:15 +00:00
bc271a8d15
Protect move tool from re-entrancy.
...
m_dragInProgress is usually sufficient, except when we haven't started
one yet. In any case, conflating the two is probably a bad idea.
Fixes https://gitlab.com/kicad/code/kicad/issues/12936
2022-11-18 17:08:38 +00:00
8dea227da7
Special cases for sheet-pin dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11949
2022-10-12 16:36:54 +01:00
3231bc5be3
Formatting and cleanup.
2022-10-12 16:36:54 +01:00
7bb0275d3c
Fix incompatibility with old rubber-band wire algo and new ortho wire drag alog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11948
2022-10-03 22:12:23 +01:00
c6284f4835
Formatting.
2022-10-03 22:12:23 +01:00
83a7ab2449
Initialize resolved status of newly created wires during drag operation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12522
2022-09-27 14:12:06 +01:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
bdffbbd43b
Handle rotation while moving from move tool.
...
This keeps us from getting CancelInteractive events in the move tool
when the EditTool runs to do the rotate.
Fixes https://gitlab.com/kicad/code/kicad/issues/12004
2022-07-22 09:31:09 +01:00
29900cad34
Add create-wire logic to labels.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11768
2022-06-10 22:38:01 +01:00
bce1fd337b
Second tool hotkey accepts action (ie: acts as click).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11729
2022-06-09 16:54:04 +01:00
bd7447cff3
Fix variable name
...
This is the top left position, not the top right.
2022-05-05 10:27:19 +00:00
653baf270c
Schematic: drag created / changed segments need junction checks
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10844
2022-04-18 17:24:02 +00:00
8dc680adbb
Implement align-to-grid for sheets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11201
2022-03-29 19:31:02 +01:00
2a726a882f
Schematic: new feature, force 45 degree lines
...
* New modes to force 45 deg angle at beginning or end of line
* Backspace will undo most recent segment added
* / will toggle posture of 90 and 45 degree lines
* Added alg::signbit for convenience
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10869
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9175
2022-03-28 16:07:23 -04:00
e51ab86225
Schematic Drag: fixes and improvements
...
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
2022-03-28 16:02:48 -04:00
05bca282f7
Re-entrancy blocker for line/wire/bus tool.
...
Also clear infobar messages after a cancelInteractive.
Fixes https://gitlab.com/kicad/code/kicad/issues/11155
2022-03-17 15:27:33 +00:00
a2772b3363
Don't crash on highight net during drag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10866
2022-02-21 13:30:15 +00:00
d0749c4e9a
Schematic: more drag undo fixes
...
Drag was not clearing IS_CHANGED status of items that were moved by the
drag, but weren't selected or created by it.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10845
2022-02-20 11:49:18 +00:00
24ac516135
Trim wires based on how many pins they intersect
...
If a wire intersects more than 2 pins from the same symbol, we don't
trim connections. If the wire intersects exactly two pins from a single
symbol, we remove the wire between the pins.
We avoided doing this before because we didn't have a good metric for
trimming vs. not. But the per-symbol calculation feels like the least
surprising option.
Fixes https://gitlab.com/kicad/code/kicad/issues/10909
Fixes https://gitlab.com/kicad/code/kicad/issues/1857
(cherry picked from commit 75a4036e45
2022-02-19 16:54:45 -08:00
97797c44b9
Schematic: added drag wires undo/redo fix
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10845
2022-02-15 19:31:17 +00:00
45a1a9a715
Replace awkward double cast with binary logic
...
The use of XOR with integers here is needed as MSVC doesn't implement
the use of std::signbit for integers and casting up to double just to
get the signbit feels wrong
2022-02-15 10:13:59 -08:00
3129f96686
Add awkward cast to double due to msvc conflict
...
https://github.com/microsoft/STL/issues/519
2022-02-14 21:43:11 -05:00
9c59c4ee12
Schematic: orthogonal drag bends should depend on move direction
...
Prevents overlapping lines when possible.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10844
2022-02-14 22:52:34 +00:00
21b59b4b6a
Eeschema: fix bus label drag adding a line
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10822
2022-02-11 21:30:50 +00:00
a5e8575091
Eeschema: Implement orthogonal dragging
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1956
2022-02-10 18:38:40 +00:00
c6a8100d46
Schematic and symbol text boxes.
...
Also fixes some plot bugs with arcs.
Also moves polygonization of arcs (when required) in plotting code
from 5 degrees to calculated based on ARC_HIGH_DEF.
Fixes https://gitlab.com/kicad/code/kicad/issues/5017
2022-01-28 21:38:15 +00:00
3409783d9f
Break sch_text.h/.cpp into sch_text and sch_label.
...
Also moves SCH_NETCLASS_FLAG to SCH_DIRECTIVE_LABEL, and remaps Altium
harnesses from SCH_TEXT to SCH_DIRECTIVE_LABEL.
2022-01-28 21:38:15 +00:00
34e90e5045
Silence MSVC warnings about type mismatch and unused var
2022-01-01 14:41:36 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
347e03363a
Convert wxPoint/wxSize starting from EDA_RECT usages
2022-01-01 11:30:33 -05:00
889970a449
SCH_NETCLASS_FLAGs and SCH_FIELDs for labels.
...
ADDED: a new label type for netclass flags.
ADDED: the ability to define fields on labels.
2021-12-24 16:13:27 +00:00
85ab4e5886
Don't deselect wires when aligning
...
This makes undo/redo look really strange as the other elements get
aligned but the wires do not (or rather their unconnected ends do not)
Fixes https://gitlab.com/kicad/code/kicad/issues/9275
2021-11-30 16:30:28 -08:00
5750e38102
Re-enable and fix Move+Autoplace Fields
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9766
2021-11-29 20:48:16 +00:00
a224d8dd6c
Disable autoplace fields when dragging/moving.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9766
2021-11-28 19:18:08 +00:00
b572781a8a
eeschema: Update anchor position of pasted items after initial move
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9534
2021-11-06 16:03:41 +00:00
996a5b85a6
Overhaul IsJunctionNeeded logic to support all the different cases.
...
Several clients were using this with different needs. The API is
now more explicit (and there are more options under the hood).
Fixes https://gitlab.com/kicad/code/kicad/issues/9518
2021-11-04 12:57:16 +00:00
b8d193485d
Respect selection reference point when set.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8520
2021-10-18 18:09:40 +01:00
71602475eb
Allow rotate/mirror even when dragging
...
Keeps the lines connected but doesn't solve the crossed-wire mixups.
This allows common usage (mirroring labels/rotating segments) and leaves
prevention of the crossed wires to the user.
We can't really prevent crossed wires when rotating e.g. a part with
wires connected to 4 sides and users will not expect that. But we
should not disable useful features like mirroring multiple parallel
items to avoid a known impossible situation
Also provides an alternative solution to 345f506f0chttps://gitlab.com/kicad/code/kicad/issues/8403
Fixes https://gitlab.com/kicad/code/kicad/issues/8523
2021-09-23 14:47:49 -07:00
fdfecf5932
Don't push view control settings to the previous active tool.
...
See further comments in bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9147
2021-09-13 13:28:05 +01:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
a1a48a4c42
Don't allow rotation/mirroring while dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8523
2021-06-13 20:22:25 +01:00
fbc135e69f
Rename SCH_COMPONENT to SCH_SYMBOL.
2021-06-10 10:34:49 -04:00
9ffa2955b7
Fix drag of bus wire creating net wires
2021-06-03 22:29:04 -04:00
0598c82972
Terminology (use present tense for flags).
2021-05-31 12:26:44 +01:00
2a856890e6
Allow connections between sheet (pins) and symbols.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8305
2021-05-12 00:07:17 +01:00
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
b78ba12739
Don't allow activation of other tools in the middle of a move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8116
2021-05-08 20:49:51 +01:00
21d4197eab
Apply SPECIAL_CASE_LABEL_INFO architecture to one-ended-drag.
...
We've been doing this for some time to wires that are attached to
the moving block (and therefore have the other end anchored). However
we also need to apply it when dragging a single end of a wire.
Fixes https://gitlab.com/kicad/code/kicad/issues/7807
2021-04-07 14:40:07 +01:00
30a073c2bb
Cleanup.
2021-04-07 14:40:07 +01:00
2b86b34124
Eeschema: split out SCH_SHEET_PIN declarations into separate header.
2021-04-06 17:15:49 -04:00
14e73d24dc
Naming conventions.
2021-03-29 11:46:05 +01:00
cf4cbea8a1
Use a more robust storage of items added to drag.
...
We kept having various issues of the pointer list going stale. This
will prevent all permutations of that.
Also while I was in there I fixed the double-move thing (see bug
number).
Fixes https://gitlab.com/kicad/code/kicad/issues/7910
2021-03-22 13:51:10 +00:00
573dd36515
Handle <delete> in move and drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7924
2021-03-15 14:23:54 +00:00
068e85c567
Reset moved flag after completing move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7818
2021-03-10 16:00:28 +00:00
8be3ff5a0a
Perform a slightly more aggressive cleanup.
...
Also removes the functionality that selects the newly-added item as
we don't do that with any of the other drawing tools.
Fixes https://gitlab.com/kicad/code/kicad/issues/7833
2021-03-09 21:42:35 +00:00
1786ae8773
Eeschema: use symbol nomenclature for object file naming.
2021-02-24 08:48:02 -05:00
57e043e0e6
Don't allow moving markers. Do allow excluding them.
2021-02-19 19:07:45 +00:00
02c7fcdc84
Fix BreakWire tool
...
Adds ability to start new commit to eeschema, allowing all
AddItemsToUndoList to always append without foreknowledge. Keeps newly
split wires on the tool until placed
Fixes https://gitlab.com/kicad/code/kicad/issues/7512
2021-02-12 17:17:12 -08:00
b07c8110c8
Follow grid snapping when moving
2021-02-02 20:23:12 -08:00
b576ccef61
Don't double-up tools on tool stack.
...
Also make sure move tool gets cancelled by other tools being
activated.
Fixes https://gitlab.com/kicad/code/kicad/issues/7259
2021-01-26 10:56:19 +00:00
d770284fa2
Add a bus instead of a wire for bus junctions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7231
2021-01-23 17:04:44 +00:00
dc65166ee7
Implement algin-to-grid for fields.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6530
2021-01-03 22:39:58 +00:00
c16dda4027
Make sure added wires (from junctions) don't get left selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6852
2020-12-27 13:17:03 +00:00
c0e5e8eeee
Formatting.
2020-12-27 13:17:03 +00:00
22a6b36257
Don't allow dbl-click to leak through to other tools.
...
This only applies if the tool doesn't handle properties (which also
handles double-click events).
Fixes https://gitlab.com/kicad/code/kicad/issues/6735
2020-12-14 22:15:43 +00:00
a19028a396
Hook up EE_GRID_HELPER to some more tools.
...
Also implements EE_GRID_HELPER layers so that connectable things
snap to connectable things and graphics snap to graphics.
Fixes https://gitlab.com/kicad/code/kicad/issues/5641
2020-12-03 15:16:34 +00:00
43fe228367
Hook up a bit more of the EE_GRID_HELPER.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5985
2020-12-02 23:18:33 +00:00
8c5c902fa3
Re-write IntersheetRefs on top of SCH_FIELDs and textVars.
...
1) Generalize SCH_ITEM owners (SCH_COMPONENT, SCH_SHEET, and now
SCH_GLOBALLABEL)
2) Generalize hypertext items
3) Use SCH_FIELD autoplace infrastructure for placing intersheet
references
4) Use textVar infrastructure for buildin intersheet references.
As an important side-effect this also fixes the undo issues with
intersheet refs.
2020-11-17 16:05:49 +00:00
91ba002da7
Make sure move machinery gets initialized if we're going to use it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6293
2020-11-06 12:21:31 +00:00
9065908859
Update SCH_SCREEN's RTree when moving items.
...
Or when modifying geometric shape/properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/5922
2020-10-30 15:26:07 +00:00
6ce803b77c
Push/pop move tool even when there's nothing to move.
...
This keeps other tools from having the special-case an empty move.
Fixes https://gitlab.com/kicad/code/kicad/issues/6048
2020-10-18 12:08:15 +01:00
b2e9f6987d
Split base_struct into eda_item and eda_rect
2020-10-13 21:24:50 -04:00
fd874d8345
Check to see if isolating junction is part of the drag or not.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
2020-10-13 13:52:49 +01:00
0efe073dec
Add wires between selected wires and unselected junctions when dragging.
...
Also fixes a bug where the auto-start-wire stuff was messing up the seleciton
when the selection tool wasn't at the top of the tool stack.
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
2020-10-12 11:46:08 +01:00
fc93a04751
eeschema: iref: use GetParentLabel instead of GetParent
2020-10-09 02:37:51 +00:00
d9485129c8
Implement more context specific cursors using both stock and custom cursors.
2020-10-08 00:50:28 +00:00
44580acee2
Clean up some compiler warnings.
2020-10-03 22:55:34 +01:00
2fc49045d1
ADDED: eeschema: Add intersheets references function
...
Add a new function to place intersheets references next to
global labels.
2020-10-01 20:39:32 +00:00
d468618411
Don't eat commands that aren't ours in SCH_MOVE_TOOL.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5692
2020-09-18 16:45:41 +01:00
c8879d9034
Eeschema: Check if user wants to warp mouse to origin of moved object
...
CHANGED: When moving a footprint, Eeschema was always warping the mouse
when moving an item regardless of the state of the "Warp mouse to
origin of moved object" checkbox. This MR now honors the state of the
checkbox when moving schematic items.
NOTE: Issue 5279 originally only mentioned Pcbnew, but after the fix
for Pcbnew was submitted, a user pointed out it also happened in
Eeschema. Becuase of this, there are two MRs that "fix" the same issue.
Fixes https://gitlab.com/kicad/code/kicad/issues/5279
2020-09-18 02:49:59 +00:00
471f81742f
ADDED: Align to Grid function in Eeschema
...
Adds tool option to align selected elements to the current grid.
Fixes https://gitlab.com/kicad/code/kicad/issues/5481
2020-09-17 12:27:43 -07:00
23a9df8a59
ADDED: Allow Eeschema dragging graphical corners
...
This separates the two options (drag/move) into different actions. Drag
will drag all graphical lines connected. Move will disconnect the
graphical lines when moving.
2020-09-11 09:31:38 -07:00
f493e270ea
ADDED: Menu option to enable/disable snap to grid
...
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
62433736bc
Snap Eeschema moves to nearest anchor
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3803
2020-09-09 10:48:15 -07:00
4026904cc4
Make grid snapping depend on grid visibility
...
Turning the grid view on enables snapping to the grid. Turning it off
removes the snap and allows free draw
2020-09-09 10:18:15 -07:00
173b4ff588
Add snapping to eeschema
...
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
02a5d47de9
Avoid passing references in EESchema
...
This returns the connection list by value. This allows easier Python
use
Also renames m_End() to GetEnd()
2020-09-08 06:29:27 -07:00
1082402b33
Convert UNDO_REDO_T to an enum class
2020-08-26 18:04:32 +00:00
1138c32bf3
Don't pass Cancel event where there was a specific action cancelled.
...
For instance, if during a move the user hits ESC they only want the
move cancelled, not (for instance) the selection dropped.
Fixes https://gitlab.com/kicad/code/kicad/issues/5356
2020-08-25 12:54:40 +01:00
3674064b9e
Fix double msgpanel refresh and use the new moved event
2020-08-18 13:11:48 +00:00
7340c97ef9
Undo for schematic-wide operations.
...
Editing value/footprint fields of multi-unit components.
Find/Change.
Annotation.
Back annotation.
Fixes https://gitlab.com/kicad/code/kicad/issues/2122
Fixes https://gitlab.com/kicad/code/kicad/issues/4869
Fixes https://gitlab.com/kicad/code/kicad/issues/3933
Fixes https://gitlab.com/kicad/code/kicad/issues/4871
Fixes https://gitlab.com/kicad/code/kicad/issues/3899
2020-07-13 12:32:17 +01:00
Jeff Young
Mike Williams
Seth Hillbrand
Simon Richter
Marek Roszko
dsa-t
Roberto Fernandez Bautista
Wayne Stambaugh
Jon Evans
Franck Jullien
Franck Jullien
PJM