Use the HTML_MESSAGE_BOX window to present the warning messages rather
than wxMessageBox which would overflow the display when there were a lot
of graphic items that could not be parsed.
Fixes lp:1839565
https://bugs.launchpad.net/kicad/+bug/1839565
The INT_MAX limit for most elements makes sense only for single-segment,
straight line elements. For elements that accumulate lengths, we should
utilize the long long int (64 bits) to allow for greater lengths.
Fixes: lp:1842367
* https://bugs.launchpad.net/kicad/+bug/1842367
We use DIALOG_SHIM to display many items that should behave more like
frames with the ability to min/max/resize. This changes the default
custom dialog behavior to the frame-type.
Fixes: lp:1829950
* https://bugs.launchpad.net/kicad/+bug/1829950
The thumb size changes between system versions and (on GTK) render
managers, so hard-coded wasn't working. This gets the actual value from
the system and uses to adjust the range. Changes in the range can also
trigger the refresh.
Fixes: lp:1822617
* https://bugs.launchpad.net/kicad/+bug/1822617
Fixes: lp:1816749
* https://bugs.launchpad.net/kicad/+bug/1816749
They're now used for bus definition control characters.
Also fixes the sheet pin edit dialog to correctly escape/unescape
netnames.
Fixes: lp:1840834
* https://bugs.launchpad.net/kicad/+bug/1840834
When plotting in Eeschema, various elements may be filled with either
the foreground or background colors. The fill mode is rather unique,
requiring un-stroked pie wedges for arcs and both closed and open filled
polylines.
Fixes: lp:1840769
* https://bugs.launchpad.net/kicad/+bug/1840769
(cherry picked from commit 213547f545)
KiCad is case sensitive but we need to be consistent in displaying sort
order as case insensitive (same as file systems)
Fixes: lp:1836911
* https://bugs.launchpad.net/kicad/+bug/1836911
(cherry picked from commit ebba15fe67)
The base initialization of EDA_RECT sets a 0/0/0/0 rectangle that
prevents merging properly with valid EDA_RECT. This sets the default to
be uninitialized until the internal data are set.
This allows rapid debugging of the coroutine memory issues. It moves
the default stack size to 256 * 4096 = 2^20, which will utilize full
pages on all architectures.
1) don't ASSERT; use exceptions (which can be caught) instead.
2) clean up LIB_LOGGER so it's only used during sync
3) fix typos in wxLogMessage() calls so they produce output.
4) throw on unrecognized token in loadContent().
5) if clipboard can't be pasted as content then paste as text.
Fixes: lp:1840172
* https://bugs.launchpad.net/kicad/+bug/1840172
libcontext currently restores and saves the FPSCR register
on ppc64. This behavior is fine (though unnecessary) on the
ELFv1 ABI which designates the register as volatile, but has
been observed to cause crashes on ELFv2 systems.
The ELFv2 ABI designates the FPSCR register as Limited-access
and specifies specific conditions that must be met to clobber
it. It does not seem that a context swap function meets these
conditions (and indeed, the save/restore register example in the
ABI document does not modify FPSCR).
This patch fixes ELFv2 ABI compliance by removing the FPSCR
save/restore code in libcontext entirely. This fixes observed
crashes on the platform and should have no consequence for
ELFv1 support.
Fixes: lp:1840088
* https://bugs.launchpad.net/kicad/+bug/1840088
* Push a function into CONDITIONAL_MENU that adds the item
* Modify the tooltip for close and exit items to have the
program name
Fixes: lp:1835454
* https://bugs.launchpad.net/kicad/+bug/1835454
KICAD_STDLIB_DEBUG option generate intrusive tests and asserts, and on Windows, generate crashed not captured by GDB.
KICAD_STDLIB_LIGHT_DEBUG generate less intrusive tests and asserts.
it adds only -Wp,-D_GLIBCXX_ASSERTIONS and that generate less asserts.
Add also the new build options in dialog about.
There seems to be a bug with certain GTK setups that prevents the
submenus from getting sized correctly unless the elements are added
when the main menu is displayed.
Fixes: lp:1835460
* https://bugs.launchpad.net/kicad/+bug/1835460
Also rewrites the PCBNew Find dialog to make use of the above, including:
1) searching in user-defined footprint fields
2) searching in pcb text
3) a history list in the search popup
4) case sensitive searching
5) word sensitive searching
6) the ability to turn wildcard searching on/off
7) better placement of the result when the dialog obscures part of the
window
Fixes: lp:1838006
* https://bugs.launchpad.net/kicad/+bug/1838006
This fixes the last suffix that was missed by 168fa09f5. The schematic
backup files should have the suffix .sch-bak to distinguish from
.kicad_pcb-bak or other backups.
(cherry picked from commit b6fe4ff637)
Previously, for instance after modifying preferences or language,
they were rebuilt but the tools state was not set due to a missing call to SyncToolbars() after rebuilding.
- fix an issue when trying to enter a scale < 1.0: such a scale starts by 0, that was rejected by the filter)
- automatic clamp to user scale limits, to avoid many warnings to users.
- if the user scale is out of bounds, warn the user before trying to print, not when opening the dialog.
On wxWidgets 3.1 they are called recursively but not on on wxWidgets 3.0.
We call now TransferDataToWindow and TransferDataFromWindow only once,
but ensure it is called for all pages.
Fixes: lp:1836901
https://bugs.launchpad.net/kicad/+bug/1836901
1) Intermediate states might be self-intersecting, and we shouldn't
be policing our users on what order to do things in
2) The polygon might already be self-intersecting, at which point we're
preventing the user from fixing it.
Also includes better const management for SHAPE_POLY_SET API.
Fixes: lp:1833831
* https://bugs.launchpad.net/kicad/+bug/1833831
m_toolMgr->ProcessEvent() returns false when a ESC key is handled. It should return true.
So we force the handled flag to true for a ESC key event to avoid skipping this event.
Otherwise the ESC key event is handled twice.
At the beginning of tool dispatcher, the ProcessEvent did not return the fact a key event was captured or not.
Now this is the case, and the old char event filtering was no longer correctly working,
and some events were not fired, especially on Windows.
I'm not sure these are necessary but I got a crash when checking one
as a boolean instead of calling is_initialized(). Sadly, my debugger
doesn't like boost, so I didn't get much more info.
For items defined by 2 point, the ending point coordinates are rounded to the near integer,
but the starting point coordinates were just truncated instead of being rounding,
creating sometimes an error for horizontal or vertical lines.
Fixes: lp:1835211
https://bugs.launchpad.net/kicad/+bug/1835211
This changes make_lexer() so that it no longer generates a custom target
but instead attaches the generated files to an existing one (so the first
argument now is the name of an existing library or executable, and it needs
to come after the add_library/add_executable call).
The generated source is no longer listed in the project sources, as it is
added by the function. The files are generated in the build tree rather
than the source tree, and the directory is added to the include path for
the respective project as well as exported to projects linking against it.
Generated files in subdirectories are somewhat supported, but need to be
referenced with the same name as they were generated (i.e. including the
subdirectory name).
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
Fixes: lp:1832357
* https://bugs.launchpad.net/kicad/+bug/1832357
Fixes: lp:1833851
* https://bugs.launchpad.net/kicad/+bug/1833851
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
In .gbrjob file, one can specify the thickness and color of some layers.
Currently, there is no way to enter these parameters.
This commit prepare a better support of .gbrjob files.
While wxWidgets has Navigate() and NavigateIn(), they're not compiled
on GTK because it supposedly has native TAB control. Of course its
native TAB control won't get you out of a grid, so that leaves us in
a bit of a pinch. This implements a poor-man's Navigate() which will
at least get us out of the grid.
Fixes: lp:1810569
* https://bugs.launchpad.net/kicad/+bug/1810569
It was calculating the bounding box twice (and failing to honour
the accuracy parameter on the bounding box test).
Worse, constructing the bounding box is about the same speed as
the rigorous test, so it never improves things.
Oblong holes (slots) use now a aperture attribute similar to round holes.
(The previous attribute "slot" is now deprecated)
However they have a specific aperture, and a comment is added in drill files for these apertures.
In singletop mode, all frames show the "Quit" option in the file menu
and will quit on Ctrl-Q. When launched from the main KiCad interface,
sub-programs show the "Close" option instead and will close with Ctrl-W.
In this mode, Ctrl-Q will instruct the main program to exit.
Fixes: lp:1779938
* https://bugs.launchpad.net/kicad/+bug/1779938
A few files snuck in with CRLF for the line endings. These make it hard
to look at diffs as every line appears to have changed. This commit
makes only line ending changes, so can be ignored
Now that our tool framework handles the hotkeys, we need to skip the
passed handling work-around for actions that are already handled in the
event.
Fixes: lp:1832604
* https://bugs.launchpad.net/kicad/+bug/1832604
Use the wxTextValidator style flag to allow the user to clear the library
identifier string. Use wxTextValidator::SetStyle( wxFILTER_EMPTY ) to
prevent empty library identifier strings which is the current behavior.
This handles images with transparent colors by mapping the transparent
color to white. This only works when plotted into the background.
(cherry picked from commit b32439a694)
Also changes the presentation of the string when the checkbox appears
so that the "Changes will be lost" warning isn't hidden by the turndown.
This last part may require conditional compilation as it's undocumented.
Lastly, regularizes the Unsaved Changes strings between the apps.
Especially, small round rect pads have a ugly shape because the number of segments is
small and the 90 deg arcs are not very well approximated.
The minimal seg count for 90 deg arcs is now 4 (16 segm/circle) for pads.
Fixes: lp:1833005
https://bugs.launchpad.net/kicad/+bug/1833005
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
DIALOG_EXIT was not being laid out correctly after setting the dialog
message. Rather than fix our custom DIALOG_EXIT, wxMessageDialog and
wxRichMessageDialog were substituted as direct replacements for all
of the variants of DIALOG_EXIT. This make message dialogs appear more
consistent because wxMessageDialog uses the default platform message
dialog and wxRichMessageDialog uses the default platform rich message
dialog on windows.
Remove DIALOG_EXIT_BASE as it is no longer required.
Fixes lp:1832899
https://bugs.launchpad.net/kicad/+bug/1832899
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
Re-arranging the stack will invalidate the iterator that is removed and
inserted (begin()). Because this is not a threaded operation, we can
only do it to ourselves, so check that the operation isn't a NOP before
performing.
Fixes: lp:1832930
* https://bugs.launchpad.net/kicad/+bug/1832930
Delete the copy ctor and assignment operator to start with, but
even then the separate apps each have their own statically allocated
copy of the common actions. So we need to update all of them, which
also means having the kicad manager frame's set of actions on hand).
This changelist also adds a Clear Hotkey Assignment function since
the hotkeys set is now likely to be sparse with respect to the
actions.
eeschema cpp files consume generated header files that have targets in
the common directory, so no dependencies get created from eeschema. We
add the dependencies in common to force the setting through libraries.
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
* rename WS_DRAW_ITEM_POLYGON to WS_DRAW_ITEM_POLYPOLYGONS (better name)
* use SHAPE_POLY_SET instead of std::vector(<wxPoint> to manage the set of polygons.
It also remove duplicate code related to HitTest and bounding box.
* fix HitTest and WS_DRAW_ITEM_POLYGON highlight.
These options were used to support the legacy canvas when drawing on
MacOS and GTK3. With the move to 100% GAL, they are extraneous. This
moves all DC over to "COPY" as we only use this for printing support in
Eeschema at the moment, so there is a single draw command (no erasing)
for the canvas.
When we assign a string to the wxFilename, it takes the last section as
the filename (unless there is a trailing '/'). So on Linux, we got
/home/user for the Documents dir and /home/ was the directory while
'user' was the filename. Appending directories 'kicad/templates' made
the final directory '/home/kicad/templates'. Forcing this to be a
directory restores correct behavior.
(cherry picked from commit 0ee38653f7)
Two issues:
* Unassigned hotkeys were being passed to WX in the menu strings as
"<unassigned>". WX doesn't recognise this, and prints debug each time.
Unassigned hotkeys are no longer rare or naughty, so we shouldn't provoke
debug spew. Suppress by not appending hotkey strings for actions with 0
(i.e. unassigned) hotkey IDs.
* The zone cutout tool uses GR_KB_SHIFT, not MD_SHIFT. This causes
"unknown hotkey" spew from WX.
Return the EDA_DRAW_FRAME class back to common, whence it came (before it was
duplicated into legacy_wx and legacy_gal). Now there is only one
implementation (the GAL one), it doesn't need to be in a separate library.
This simplifies the dependencies for common lib users.
This mixes the de-emphasized layers into the background color rather
than merely a black color. This also keeps some of the original layer
color.
Fixes: lp:1831316
* https://bugs.launchpad.net/kicad/+bug/1831316
It was due to a angle normalization between -360 and 360 degrees.
So, in arcs, if the start angle and end angle diff is n*360 deg,
this normalization gives start angle = end angle.
The fix forces end angle = start angle+360deg in this case.
Fixes: lp:1832096
https://bugs.launchpad.net/kicad/+bug/1832096
We prevent the creation of invalid polygons by keeping the converging
lines from intersecting. This test doesn't make sense for triangular
polygons as they always intersect and we want to allow them to move
outside of the singular point.
Fixes: lp:1831481
* https://bugs.launchpad.net/kicad/+bug/1831481
(cherry picked from commit 966173c129)
Building custom targets that depend on custom commands such as our
keyword lexer requires two layers of indirection to pick up changes
properly and not overwrite the same file in parallel builds.
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
The action menu handler was capturing too many menuitem events.
Only context menuitem highlight events and some popup menu events need to be captured
Any id < 0 (like automatically assigned menuitem id) is no longer captured.
Fixes: lp:1831669
https://bugs.launchpad.net/kicad/+bug/1831669
Due to an interaction with old (<1.59) versions of Boost, the ostream
operator<< for wxPoint and wxSize is requried to use
BOOST_CHECK_EQUAL_COLLECTIONS (the print_log_value<T> function is not
used by this macro until 1.59).
Because these functions are available in Debug builds, unit tests that
use such functions will break when compiled as Release or
RelWithDebugInfo.
The change here is to not disable these functions in Release builds.
Also, the functions are moved to common.h, to go with other generic
WX "polyfill" functions. Although they might be commonly used by the
EDA_ITEM::Show functions, they are not specifically related to that
class.
Fixes: lp:1830612
* https://bugs.launchpad.net/kicad/+bug/1830612
This fixes multiple issues when importing Eagle V6 files.
Crashes occured when arcs of 0-length were found and when parts were
referenced in the schematic that were not found in the library. This
could happen if the library and schematic were different cases.
Fixes: lp:1830564
* https://bugs.launchpad.net/kicad/+bug/1830564
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments. This allows the user to customize their speed vs. accuracy
tradeoff. The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
The source bitmap was copied to the new created item.
However, for Checkable menu-items, when setting a bitmap, our standard check bitmap is also added.
This is unwanted when the source bitmap is the wxNullBitmap (bitmap sizes are different)
The bitmap pointer is not checked at copy construct. This is
an instant segfault if you copy an empty bitmap.
Fix the constructor and remove the expected test failure, from the
previous commit.
This corrects an issue with fill segments-per-circle and moves the error
to segmetns calculation down in a number of functions to expose the
single value for approximation
Sometimes we want to inflate a polygon without adding rounded edges.
This add the option using the jtMiter setting.
This is used in the Eagle parser to expand the Eagle zones for KiCad.
Eagle Zones are drawn on the polygon edge, so they extend out from the
outline. KiCad zones are drawn inside the polygon. We need to both
increase the zone size and decrease the minimum pen width to account for
this.
Fixes: lp:1817312
* https://bugs.launchpad.net/kicad/+bug/1817312
This commit redirected too many menuitem IDs to the tool manager.
Only some context menu items have to be redirected, not all inside ACTION_EVENT events.
This hack is not perfect. It needs a better handling of ACTION_EVENT handling.
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
Add the N/Shift+N hotkeys to the eeschema hotkey file.
Also adjust the COMMON_TOOLS::GridNext/Prev to work when
the screen's grid definitions do not have consecutive command
IDs (they do not in eeschema).
This is related to lp:1811018 (but doesn't constitute a fix).
* https://bugs.launchpad.net/kicad/+bug/1811018
Remove the axis numbering code from ARRAY_OPTIONS
and place in a new class, ARRAY_AXIS. This keeps
the logic for the array item numbering separate from
the logic for the array item geometry.
This simplifies the logic in the ARRAY_OPTIONS class, which
no longer has to deal with the numbering of each axis.
Replace INCREMENTAL_TEXT_CTRL with wxSpinCtrlDouble because it looks
and works better.
Remove INCREMENTAL_TEXT_CTRL header and source files because the only
place they were used was in GAL_OPTIONS_PANEL.
Note that the comment in line 142 where the scale factor was set had the
correct value to indicate metric (1) but in the actual boilerplate, we
set imperial (0). This has been around for 6-8 years, so it would seem
DXF is not our most popular export.
Note, I initially tried to use '1' to specify metric units but this was
not handled by DXF readers (QCAM, Inkscape). Instead, scaling the page
units to inches properly seems to work.
The default is meant to be "Save" but "Discard" was selected due to ID
ordering on creation. Setting the focus before setting the default
makes the "Save" option the highlighted option that can be selected
immediately by pressing enter.
When drawing an arc, show a guide circle that indicates the
radius of the arc at the current cursor. This can be useful
as a guide for seeing where the arc will reach once the radius
is fixed by the second click.
Fixes lp:1796158
* https://bugs.launchpad.net/kicad/+bug/1796158
This is a stop gap fix. It should be possible to use the wxFrame title
string for this but some of the frame windows have appropriated the title
string for configuration file naming purposes which is less than ideal.
Fixes lp:1825977
https://bugs.launchpad.net/kicad/+bug/1825977
Provide a toolkit-agnostic interface for "busy indicators", which
allows the 3D viewer to show a busy cursor, without the canvases
having to to know how a wxCursore works.
The motivation here is to decouple the 3D renderers from the WX
GUI system, as they can then be used when when there is not an
active window (e.g. for offscreen rendering).
Otherwise, attempting to use a wxBusyCursor without a GUI
available is an instant segfault.
Prevent user from pasting text with carriage return and/or line feed
characters in field value edit control in the schematic symbol and symbol
library properties dialogs.
Make all objects derived from GRID_CELL_TEXT_BUTTON use validators
correctly.
Add validators to FIELDS_GRID_TABLE object for field values other than
the mandatory fields.
Create a validator to check that a string is a valid LIB_ID.
Fixes lp:1828214
https://bugs.launchpad.net/kicad/+bug/1828214
This is mainly the solder paste layer that shows this issue.
This is due to the fact SHAPE_POLY_SET::Inflate does not work fine with polygons with linked holes.
SHAPE_POLY_SET::InflateWithLinkedHoles it added to fix this issue.
Fixes: lp:1828287
https://bugs.launchpad.net/kicad/+bug/1828287
Commit e10c01aaf didn't work when touchpad panning was enabled.
This commit changes it to only discard horizontal wheel events
when in "scroll mode" rather than "pan mode".
Based on a patch by Adrian Scripcă <benishor@gmail.com>.
Follow-up to fix: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
Modern mice feature horizontal scrolling capabilities and those end
up being treated by KiCad as regular scroll events causing confusion
among users.
The fix works by discarding the handling of wheel events other than
the ones for the vertical axis.
Fixes: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
Force the symbol library links whenever the symbol library table has been
modified. This will use the cache as a fallback when a library has been
removed that contains links in the schematic rather than display.
Fix the SCH_COMPONENT symbol resolver when falling back to the cache. The
resolver was using the LIB_ID ':' notation which was failing. Replacing
':' with '_' fixed this issue. This was also an issue when generating the
symbol message panel information.
Convert wxLogDebug to wxLogTrace in symbol resolver code path. Add new
trace type KICAD_SYM_RESOLVE.
Fixes lp:1821606
https://bugs.launchpad.net/kicad/+bug/1821606
There is a rendering bug in GTK3, which appears to be
an upstream GTK issue.
This can be worked around by, when filtering, ensuring the
*parent* item of the selected item is visible. This will
not cause the selected item to not be visible, as the selected
item will be the first shown child. So it will be visible, as long
as the list box is greater than a single row high, which it will be
in all practical scenarios.
This is done on all platforms, as it has a beneficial side-effect:
the parent library of the selection is naturally shown to the
user, so they don't need to scroll up to see what library their
current filter selection was in.
Fixes: lp:1804400
* https://bugs.launchpad.net/kicad/+bug/1804400
This allows a const BITMAP_BASE to expose const image
data. This is currently done with const_casts, which is
"OK", only as long as the source image is not declared
const, in which case it's undefined behaviour.
Also immediately dereference the pointer to a reference
if it's not checked to make the non-null requirements
explicit at the point of access.
Both versions of EDA_DRAW_FRAME::isBusy have a useless const_cast.
GetScreen() const returns a non-const SCH_SCREEN already, it doesn't
need to be cast, and it's stored in const SCH_SCREEN anyway.
This is useful when working on code paths that rely on KiWay
communications, since you can run and debug the kicad application
without needing to run an install task first.
In OpenSSL 1.1.0 and newer, the locking callback macros do nothing.
This causes unused warnings for the static function lock_callback.
Ignore this function on newer OpenSSL builds, but keep
the infrastructure for now.
When OpenSSL's min version is 1.1 or greater, all the locking
infrastructure can be removed.
Prevent a divide-by-zero bug in SHAPE_ARC::ConvertToPolyline.
When the radius is zero, just use the initial angle (it makes
no different anyway, the result is the centre point, which is
the start point.
The wire image undo/redo option required special handling and was only
used in a single location. Replacing with single change handling
reduces the code complexity
Move repeated GAL config reading routines into GAL_DISPLAY_OPTIONS.
THe app-level config is in here already, do the same for the
common config.
This means that the configs are loaded consistently, which fixes
the symbol-chooser preview window, which previously didn't use the
same config routine as other GAL canvases.
Future work could move these functions to free functions that
act on the public interface of GAL_DISPLAY_OPTIONS to avoid
GAL_DISPLAY_OPTIONS having to know about wxConfig and wxWindow.
Fixes: lp:1824524
* https://bugs.launchpad.net/kicad/+bug/1824524
Hash collisions reduce the speed of unordered maps by increasing the
comparison time of underlying values. This implements the inverse
golden ration offset into the x value to ensure that consecutive points
are far from each other in the map.
This allows setting the config dir at build time, providing packagers a
method of controlling where the configuration files are placed.
Fixes: lp:1780601
* https://bugs.launchpad.net/kicad/+bug/1780601
On some platforms like MSVC, NaN prints as "-nan(ind)". This
is a bit needlessly ugly, so print "NaN" on all platforms
consistently.
This fixes a test failure on MSVC.
This allows us to make the various netlist and pcb update routines
more atomic and less reliant on carefully sequenced asynchronous
messages.
This is also a prelude to adding support for footprint testing
without a netlist.
Both Cairo and OpenGL had issues (different, though) with circles that are
thicker in line width than they have radius. This corrects the OpenGL
implementation (radius is calculated to the outer edge) as well as Cairo
(line width needs to be clamped to twice the radius)
Fixes: lp:1822765
* https://bugs.launchpad.net/kicad/+bug/1822765
Statically constructing wxCursors as used for the probe
and tune cursors crashes the qa_eagle_plugin test
instantly.
Fix this by introducing a new class CURSOR_STORE,
which allows to abstract the platform wierdness of wxCursors
and allow the simulator to laziliy init its own cursors
at runtime.
This code isn't properly tested, as these cursors are never
actually used. However, it does allow the eeschema unit test
to run.
Fixes: lp:1781191
* https://bugs.launchpad.net/kicad/+bug/1781191
Bus upgrades: core new connectivity code
Bus upgrades: eeschema integration and modifications
Bus upgrades: eeschema dialogs
Bus upgrades: netlist export
Bus upgrades: file format changes
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
Introduced by 416e64a334. The code
appears to have been stepped on purpose but this would be incorrect for
most applications. There remains a good deal of cleanup in mathplot
available for the motivated dev.
Fixes: lp:1810311
* https://bugs.launchpad.net/kicad/+bug/1810311
wxPlatformInfo::Get() causes a linker error on Msys2.
Fix this by making common link wx explicitly, rather
than implicity via it's dependencies, which cause
wrong-order linker command lines on windows.
First, add automatic detection of toolkit DPI scaling options. For now, this
is, in order,
* Check the GDK_SCALE option under GTK+ (users can set this to force the scaling)
* Check the value from WX's GetContentScalingFactor(). This will start to work
correctly from WX 3.1 and GTK+ 3.10.
Then, add a user-settable override in the main prefs panel, next to the icon
scaling. This is independent of the icon scaling options.
DPI handling is performed in a standalone class, so they can be shared between
the prefs UI and the OpenGL backend easily. Also means Cairo could use the same
interface in future.
Also adjust the OpenGL grid drawing code to use the computed scale factor,
which avoids over-thick grids in scaled environments (the user can manually
thicken the grid if wanted).
Fixes: lp:1797308
* https://bugs.launchpad.net/kicad/+bug/1797308
Autosave was not working correctly, partly due to different
implementations in eeschema and pcbnew and partly due to a mistaken
refactor at some point during v5 development. This unifies the expected
autosave prefix to _autosave- for both pcbnew and eeschema. It also
unifies the expected suffix for the backup files to -bak.
Fixes: lp:1820433
* https://bugs.launchpad.net/kicad/+bug/1820433
Allows 0 to 4 chamfered corners, not only one.
A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
Disable the text update event for the orientation cutom value field before
updating it when the radio buttons are selected. This allows to use the
conventional EVT_TEXT handler, rather than KEYDOWN, which has two effects:
* Tabbing though the dialog no longer sets custom orientation
* Click-driven clipboard actions trigger the update correctly.
Introduce a helper function in validators.h to assist in updating
validated fields without triggering further events.
Fixes: lp:1819006
* https://bugs.launchpad.net/kicad/+bug/1819006
wxWidgets has several bugs that result in cell editors being closed
right after they're opened. There are two wxWidgets hacks to
partially address this: the SetInSetFocus() hack, and a slow-click
hack. We used to try and work-around these bugs ourselves for
single-click access, but this changelist moves those over to
wxWidget's slow-click hack.
Fixes: lp:1817965
* https://bugs.launchpad.net/kicad/+bug/1817965
The folder button handler works will for footprint libraries but we
needed a specific class for the schematic libraries as well.
Fixes: lp:1818346
* https://bugs.launchpad.net/kicad/+bug/1818346
Added checks to StrCmpNum() function in common/sting.cpp to prevent
iterating past the end of the sting. Also removed length of string
parameter since it did not seem to be used anywhere.
Fixes lp:1818157
https://bugs.launchpad.net/kicad/+bug/1818157
The cancel action was set for the escape key when editing the fields in
a dialog. But when the action is a button, we need to ensure that the
escape id is set to ANY for processing.
Fixes: lp:1818056
* https://bugs.launchpad.net/kicad/+bug/1818056
For unknown reasons, GTK3 may send resize events when editing grid
fields. This can cause the grid editor to exit, losing the focus and
overwritting the characters at the next input.
We avoid this by filtering the size events when the size doesn't change.
Fixes: lp:1817810
* https://bugs.launchpad.net/kicad/+bug/1817810
Wayland is not yet compatible with wxWidgets (or rather the other way
around). Until this happens, we must force the x11 compositor while
running. Under wayland, this will map to the wayland-x11 compatibility
layer.
Fixes: lp:1816637
* https://bugs.launchpad.net/kicad/+bug/1816637
For BUTTON_ROW_PANEL::BTN_DEF_LIST, the button definition does not need to be
passed by value, by non-const reference avoids copies and this addresses the
Coverity warnings: 184130, 184134, 184140, 184167.
Also use a unique_ptr to clarify ownership sementics when handing widget
over to WX.
In Symbol editor, axis are always shown. However after switching the backend, axis were no longer drawn.
In Cairo engine, fix a bug preventing axis to be shown.
Jeff Young
Seth Hillbrand
Wayne Stambaugh
jean-pierre charras
Ian McInerney
Simon Schubert
Shawn Anastasio
Michael Kavanagh
Stefan Hamminga
Tomasz Wlostowski
Simon Richter
Thomas Figueroa
Steven A. Falco
John Beard
Jon Evans
Adrian Scripca