4c5567a627
Allow colliding pads in netties as well as graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6584
2020-12-05 19:44:02 +00:00
4634802a58
Formatting.
2020-12-04 19:29:04 +00:00
09bfb76545
Make sure dissallow constraints get added to rule.
...
Also improves some error reporting.
Fixes https://gitlab.com/kicad/code/kicad/issues/6566
2020-12-03 23:08:51 +00:00
dadfe03804
Reinstate 5.1 net-tie hack since "real" net-ties got pushed to 7.0.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6556
2020-11-30 16:11:15 +00:00
3a9a6e22bc
Fix issues in reporting netclasses.
...
1) make sure we get the default netclass when we want it
2) escape for HTML (particularly important for "<invalid>", but also
for reporting user rule names, netclass names, etc.)
2020-11-30 14:38:06 +00:00
3989c19c41
Don't test pad:track clearances in pad tester.
...
They've already been tested in the track tester.
Fixes https://gitlab.com/kicad/code/kicad/issues/6554
2020-11-30 14:38:06 +00:00
e09271ca0e
Fixes for hole clearance and hole-to-hole tests.
...
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
2020-11-29 23:35:23 +00:00
e4d0ffd607
Retire old SKIP_STRUCT filtering.
...
We already added the checkedPairs stuff which deals with a:b vs b:a
better, and the SKIP_STRUCT version had side-effects between the two
tests.
Fixes https://gitlab.com/kicad/code/kicad/issues/6539
2020-11-29 00:08:23 +00:00
1cae0b6c08
Make sure board edges have 0 width.
...
When we divide up a rectangle or polygon (for better RTree usage)
we need to make sure the individual segments also have their widths
zeroed out.
Fixes https://gitlab.com/kicad/code/kicad/issues/6482
2020-11-24 23:49:28 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
2f3f4c209e
Make sure DRC reports a missing board outline.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6481
2020-11-24 14:22:27 +00:00
1391774f64
Re-factor boundary/courtyard checker error handling.
...
ADDED Footprint Checker dialog to display the results in.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-21 20:57:35 +00:00
ff3bd7e72a
Fix a crash bug in DRC, and equate Margin to Edge.Cuts.
2020-11-20 21:22:27 +00:00
b123318cf6
Encourage use of full DRC for board & footprint malformed outlines.
...
It shows much more detail. Removes some nag dialogs and places
hypertext links in others.
Also fixes the auto-layer-showing to correctly show Edge.Cuts or
F.CrtYd or B.CrtYd for errors relating to them.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-20 17:24:52 +00:00
533d344e3f
Honour pad falshing when colliding with DRC RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6443
2020-11-19 23:55:14 +00:00
0d850f98cd
Cleanup.
2020-11-19 22:48:18 +00:00
6e0c58adec
Include local clearances even if no implicit rule was found.
...
The real test should be to apply it any time an explicit rule is
*not* found.
Fixes https://gitlab.com/kicad/code/kicad/issues/6426
2020-11-19 22:48:18 +00:00
bfc4afc506
Restore the 5.1 NetTie hack.
...
We really need to do first-class net ties....
Fixes https://gitlab.com/kicad/code/kicad/issues/6416
2020-11-17 20:07:21 +00:00
795e45836d
Fix assert in DRC.
2020-11-17 17:41:57 +00:00
b2d86ec7c9
Don't double-check DRC clearances (a:b and b:a).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6417
2020-11-17 16:58:39 +00:00
8c08b861ab
Cleanup some compiler and Coverity warnings
2020-11-15 21:41:38 +00:00
1ce1e493d6
A rule zone is not really a BOARD_CONNECTED_ITEM.
...
Or at least it shouldn't always be treated as one.
Fixes https://gitlab.com/kicad/code/kicad/issues/6382
2020-11-15 20:23:15 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
2eb71447e4
DRC RTree fixes.
...
1) Don't collide against hidden text
2) Don't collide in both directions (a:b & b:a)
2020-11-14 16:59:34 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
3451ac3088
PCB_MODULE_T -> PCB_FOOTPRINT_T
2020-11-13 15:16:24 +00:00
63a54d003e
More module -> footprint.
2020-11-13 15:16:24 +00:00
9106cc19bf
Yet another tranche of module -> footprint.
2020-11-13 15:16:24 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
d88eaaf477
Fix various compiler and Coverity warnings
2020-11-11 00:41:02 +00:00
81ea71fb80
More safety when fetching via sizes.
2020-11-07 18:50:30 +00:00
ae9afdd169
SNR. (Mostly for progammers, but a little for user messages.)
2020-11-02 16:20:00 +00:00
c351b3c31f
Naming conventions.
2020-11-01 14:12:35 +00:00
f600450ee6
DRC_TEST_PROVIDER_COPPER_CLEARANCES is for copper only.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6248
2020-11-01 14:12:35 +00:00
d2befca5af
Clear subshapes before using again on a different layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6248
2020-11-01 14:12:35 +00:00
7676ba6f5d
Coverity warning.
2020-11-01 14:12:35 +00:00
a9bf4bc6a6
Fix freed-memory crasher.
...
While the DRC_ENGINE is not long-lived, it's test providers are,
and must be cleared for each use.
2020-10-31 15:45:41 +00:00
115fd1d7f3
Move track-to-zone testing to RTrees.
...
Also implemente pad-to-zone testing and removes the control in the
GUI (now that it's fast).
2020-10-31 15:45:41 +00:00
1a1aef756e
Reporting "actual" incompatible with exiting after first hit.
...
But we're currently using this only as a rough collision check
anyway as it doesn't know the specific item-to-item clearance.
2020-10-31 15:45:41 +00:00
788a1e3bce
Handle footprint zones in zone collision checks.
...
Also fixes issue with progress reporter.
2020-10-31 15:45:41 +00:00
cd93dbd324
Naming cleanup.
2020-10-31 15:45:41 +00:00
8d4c9aeaac
Fix Mac-style include.
2020-10-31 15:45:41 +00:00
d5addb692c
Move a bunch of DRC tests to RTrees.
2020-10-31 15:45:41 +00:00
776ea35040
Fix copy/paste error and some formatting issues.
2020-10-27 22:46:19 +00:00
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
2e94be0855
Move geometric parts of Cleanup Tracks and Vias to RTree.
...
Removes two separate O(n^2) traverses over the tracks.
Fixes https://gitlab.com/kicad/code/kicad/issues/6077
2020-10-26 18:37:59 +00:00
c092e3f8b7
Fix a few minor Coverity warnings
2020-10-26 10:46:08 +01:00
1984581c46
Remove common.h from more headers
2020-10-25 22:29:53 -04:00
45113f983b
Fix test case.
...
Silk tests were processing MODULE_Ts when they shouldn't have been.
2020-10-25 23:19:39 +00:00
2ee61f52ca
Implement correct layer handling for keepout constraints.
2020-10-25 22:47:47 +00:00
8c93fc76ae
Don't require keepout zones to be named.
...
insideArea() now takes A, B, a UUID or a zone name. (Only the UUID
is new.)
2020-10-25 21:08:09 +00:00
5b1e1075a9
Allow an easy way for DRC tests to specify compound objects or not.
2020-10-25 20:24:47 +00:00
386cefbe84
Do footprint keepouts by courtyard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6162
2020-10-25 18:17:58 +00:00
d6f91c810f
Fix a few compil and Coverity warnings.
2020-10-25 10:02:07 +01:00
e928b2d8fd
Split EDA_UNITS out from common.
2020-10-25 00:02:52 -04:00
7674d2ba91
Free allocated DRC structures when re-initializing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6147
2020-10-24 22:39:53 +01:00
66bcfb3ffc
drc_engine: Fix via type names
...
There was a mismatch between the via type names used in the DRC engine
and the via type names defined in the class_track.cpp ENUM_MAP for
VIATYPE.
This fixes the discrepancy; which was breaking microvias altogether as
the route tool also uses the DRC code to determine the correct
diameter/drill (without this patch it was incorrectly using regular
dimensions for microvias.)
2020-10-24 15:46:47 +00:00
59f3fefd17
When polygonizing arcs don't use synthesized center and angle.
...
Start, mid and end are the "real" properties and come with less
error.
Also collapses two arc polygonization routines into one.
Also fixes DRC checks to be cognizant of arc approximation error.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 23:55:45 +01:00
19bf594aa0
Remove unused point in polygon test
...
There can be only one.
2020-10-23 12:13:09 -07:00
01ce881340
Honour NOT_IN_SCHEMATIC setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6137
2020-10-23 17:27:18 +01:00
cce557b9ad
Redo the board-edge-building logic to return better error reports.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6119
2020-10-22 21:29:04 +01:00
41fd8293e8
Don't apply clearance to keepout zones.
...
Also improves the clearance and keepout reporting.
Fixes https://gitlab.com/kicad/code/kicad/issues/6118
2020-10-22 21:29:04 +01:00
9ff49277e1
Add implicit rule generation for keepout areas.
...
Also implements collision detection for SHAPE_POLY_SET.
Fixes https://gitlab.com/kicad/code/kicad/issues/6105
2020-10-22 10:41:21 +01:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
18f9f3cf0b
Add curved track support to track-to-zone DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-20 13:38:09 +01:00
8ff51d8899
Eeschema: add schematic sheet page number.
...
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
2020-10-19 14:05:45 -04:00
c5d45f8a78
Move DRC dialog to same DRC rule reporting mechanism as inspectors.
2020-10-17 20:40:05 +01:00
6e54856e67
Don't halt other tests when one test's max is reached.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6035
2020-10-17 12:13:04 +01:00
1b2168af1e
Don't throw implicit rules out after failing to compile user rules.
2020-10-16 12:44:20 +01:00
eea7957e16
Inform user of bad DRC rules when filling zones.
...
ADDED: facility for hypertext links in infobar.
Also made use of this for via constraint errors when routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5800
2020-10-16 12:44:20 +01:00
6b7749658e
Report all implicit rules for resolution reports.
2020-10-15 20:53:27 +01:00
ebd5dc81cc
Fix some more cases of malformed syntax crashing the compiler.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6016
2020-10-15 18:32:52 +01:00
5ac17288a9
Work around missing copy constructor for PCB_SHAPE.
...
Also introduces performance enhancements so that single closed shapes
for board edges don't eliminate the effectiveness of the RTree.
Fixes https://gitlab.com/kicad/code/kicad/issues/5990
2020-10-15 11:38:18 +01:00
1d93effa14
Don't build RTrees if test results will be ignored.
2020-10-14 15:56:32 +01:00
f220e83de6
Board edges have no width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5990
2020-10-14 15:56:32 +01:00
2c86363aa0
Relocate the page_layout includes to a page_layout folder
2020-10-13 20:33:33 -04:00
cb1d416e5a
Use settings keys, not error codes, for ERC/DRC reports
...
Error codes can shift around if the enum ordering is
not maintained, which is more fragile than the settings
key which should never be changed after a new code is
created.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6001
2020-10-13 18:03:07 -04:00
3fc1a0c314
Fix faulty copper-checking logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5978
2020-10-13 16:32:54 +01:00
2e6968e7eb
Board edges tester also needs to check silk text for visibility.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5989
2020-10-13 00:58:38 +01:00
83d231cd49
Fix test under msvc
2020-10-12 19:47:36 -04:00
8c4197db2a
Netclass track widths and via sizes are opts, not mins.
2020-10-13 00:34:10 +01:00
cd1a5ed6fb
Implement progress reporting for DRC RTree.
...
Also fixes a bug in silk-to-mask checking which wasn't checking
zones on the mask layer.
Also a perfomance fix for the DRC RTree to use a hash table (std::map)
instead of a std::set for keeping track of known collisions.
Fixes https://gitlab.com/kicad/code/kicad/issues/5851
2020-10-13 00:03:58 +01:00
5afae757ff
Remove silk_clearance == 0 hack now that we have implied rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5977
2020-10-12 21:13:26 +01:00
af90642440
Hook board edge clearance constraints up to zone filling.
...
Also hooks them up to the clearance resolution reporter, and makes
some general improvements to reporting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
2020-10-12 18:31:00 +01:00
32dffd27ab
Add silk clearance to board setup constraints.
2020-10-12 18:31:00 +01:00
1bcefe420a
Move compound graphics tests back out to the shared path.
2020-10-12 11:46:08 +01:00
72f6127e53
Clean up terminology so it matches the user message better.
2020-10-12 00:14:32 +01:00
8e70381be3
Don't try and infer optimum widths for board minimums.
...
It doesn't work well with sorting the implicit rules by clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-11 17:17:21 +01:00
af28ef9d56
Add silk clearance checking to Resolve Clearances...
...
Also fixes a bug in order of RTrees in silk collision checker.
2020-10-11 14:18:11 +01:00
42eecdfd3a
Collapse silk constraints down to one.
...
Also updates the rule syntax help and code-completion with a bunch
of diff-pair and other stuff that hadn't been updated yet.
2020-10-11 13:19:23 +01:00
bcebb19665
Add implied diffpair netclass rules.
2020-10-11 13:19:23 +01:00
22cde88ba9
Allow chamfering/filleting of zone/board edge intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
2020-10-10 23:09:43 +01:00
04c4012ee6
Make track/via sizes UI more predictable and compatible with DRC.
...
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules. They're also now dependent
on the layer being routed as well as the start object.
Also make the controls adjust to each other better. For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-10 19:32:30 +01:00
fdeb340d21
Defensive code against missing nets.
...
Also adds net re-parenting code to Repair Board.
Fixes https://gitlab.com/kicad/code/kicad/issues/5935
2020-10-10 16:54:19 +01:00
90baed7e82
Fix typo of transposed semi-colon and comma.
...
Also eases translation of strings while we're here.
Fixes https://gitlab.com/kicad/code/kicad/issues/5933
2020-10-10 12:25:22 +01:00
1fc94c7a2d
Fix printf arg mismatch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5933
2020-10-09 13:57:49 +01:00
0c7630f8b4
Get rid of wxWidgets assert.
2020-10-09 00:31:29 +01:00
4f2e574f4b
Move IsADiffPair to drc_engine.cpp for now.
...
Otherwise we have to include drc_test_provider_diff_pair_coupling.cpp
in CVPCB, which isn't ideal either.
I'll let Tom figure out the best plan going forward, but this should
at least get things compiling/linking again.
2020-10-09 00:05:22 +01:00
6550e01318
Sort synthetic netclass rules by min clearance.
...
This way when 'A' and 'B' have different netclasses the largest will
fire (rather than just a random one of the two).
Fixes https://gitlab.com/kicad/code/kicad/issues/5926
2020-10-08 23:41:27 +01:00
b5fa523a11
PCB_EXPR_EVALUATOR: added isDiffPair() API method
2020-10-09 00:01:26 +02:00
5c2c66dd07
drc: sane default rules for via diameters/diff pair widths/diff pair gaps (required by the P&S)
2020-10-09 00:01:26 +02:00
8a7fc7e970
drc: more robust segment pair detection, still issues with approximated arc corners though...
2020-10-07 16:36:37 +02:00
719363fa4a
Factor out class MINOPTMAX<> into a separate header
2020-10-07 16:36:37 +02:00
f620f8bdd3
Report silk/edge collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5854
2020-10-06 13:20:52 +01:00
0751965b2b
Be more responsive to user cancel.
2020-10-05 22:31:52 +01:00
5705859e9e
Remove accidental debug code.
2020-10-05 12:27:21 +01:00
37906511f5
Class renaming.
...
DRAWSEGMENT -> PCB_SHAPE
EDGE_MODULE -> FP_SHAPE
TEXTE_PCB -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
7a4900b8dc
PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T
...
Also updated footprint text and zone types for consistencey.
2020-10-04 16:49:04 +01:00
85c6cebd77
Rework silk-to-pad checker to handle all solder mask clipping of silk.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5851
2020-10-04 13:21:01 +01:00
36ceb8075e
Fix logic bug in DRC RTree handler.
...
Return value from visitor is whether or not to keep searching, not
whether or not there was a collision.
2020-10-04 13:21:01 +01:00
44580acee2
Clean up some compiler warnings.
2020-10-03 22:55:34 +01:00
400c15b8eb
Add mils to units, remove useMils variables
2020-10-03 20:06:56 +00:00
3144bab36f
final cleanup about removing useless include
2020-10-03 16:40:36 +02:00
0b23cb7dbb
more cleanup about removing useless include
2020-10-03 15:26:03 +02:00
bea5914726
Make sure all DRC paths check for via/pad being flashed on layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5830
2020-10-03 14:20:19 +01:00
e76736b7bf
Fix a few Coverity warnings
2020-10-03 12:47:41 +02:00
5ef1dc17ad
drc: ignore silk2pad/silk2silk violations for hidden text objects
2020-10-02 21:06:52 +02:00
ca8aca6faa
drc: implement DRC_RTREE::CheckColliding
2020-10-02 21:06:52 +02:00
8eb9d34aad
drc: silk to silk clerance test should not report errors for hidden text
2020-10-01 18:55:53 +02:00
aee16efe32
drc: LVS test should not throw an error if running in no-project mode
2020-10-01 18:55:53 +02:00
f702da95c7
Minor code cleanup, step2: remove more useless include.
...
fix also a minor compil warning
2020-10-01 15:39:47 +02:00
3f8c9d49f8
Revert "Code cleanup: remove useless wx/wx.h include inside a few files."
...
due to compil issue on Linux
This reverts commit cffccc3970
2020-09-30 20:47:20 +02:00
cffccc3970
Code cleanup: remove useless wx/wx.h include inside a few files.
...
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
2020-09-30 20:03:27 +02:00
bf3cb0b1d0
Standardize pad type enums
2020-09-30 08:38:35 -07:00
d3f8f2b81e
Remove confusion between pad->IsOnLayer and pad->IsPadOnLayer
2020-09-30 11:50:51 +01:00
ab033327c7
Limit checks need to be done at start, not end.
...
(We also use the limit checks to ignore violations.)
Fixes https://gitlab.com/kicad/code/kicad/issues/5831
2020-09-29 21:23:26 +01:00
2cf303bb09
Test against pad hole cylinder when pad is not on layer.
2020-09-29 18:18:19 +01:00
66454ec895
Don't do hole-to-pad clearance testing on compound pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5822
2020-09-29 14:11:32 +01:00
bf67648562
Support optional location reporting in SHAPE collisions.
...
Also fixes a few bugs in the collision routines.
2020-09-28 23:28:33 +01:00
09ab269770
Support for 'L' in DRC expression language.
...
Also make layer testing work again against both canonical names and
user names.
2020-09-27 21:33:37 +01:00
c5c6b97c8b
drc: fixed warnings in length matcher
2020-09-27 17:51:16 +02:00
fbb669aa75
drc: diff pair test provider reports gap & max uncoupled length violations.
2020-09-27 17:50:57 +02:00
8e9a39e17c
drc: fix incorrect DRCE_LAST
2020-09-27 17:50:24 +02:00
5874373a0c
drc: unfinished version of diff pair gap/coupled length test
2020-09-27 16:45:46 +02:00
9b4504e73f
drc: report from-to paths for length matched signals
2020-09-27 16:45:46 +02:00
adf7d3260d
drc: parse diff pair constranits
2020-09-27 16:45:46 +02:00
cb2dfcde83
drc: error codes for diff-pair related stuff
2020-09-27 16:45:46 +02:00
bd0bd5b84b
drc: support for skew & via_count constraints. Length test now generates a length report
2020-09-27 16:45:46 +02:00
f38147c201
drc: add support for via_count constraint to the parser
2020-09-27 16:45:46 +02:00
2258c861c9
drc: initial version of matched trace lengths test provider
2020-09-27 16:45:46 +02:00
2bacfe8202
drc: use R-Tree intersection for silk clearance tests
2020-09-27 16:45:46 +02:00
b215361b30
drc: default constraints for silk2pad, silk2silk
2020-09-27 16:45:46 +02:00
26e7dc6e14
drc: added length/skew constraint types
2020-09-27 16:45:46 +02:00
abe354773f
drc: initial version of tree intersection (QueryCollidingPairs)
2020-09-27 16:45:46 +02:00
8405793e57
drc: add error codes for length/skew/via count violations
2020-09-27 16:45:46 +02:00
201a630740
drc: extend drc-rules file format with length and skew tokens
2020-09-27 16:45:46 +02:00
6578a76b72
drc: first R-tree based test (silk to pad clearance)
2020-09-27 16:45:46 +02:00
43404d4577
drc: be more verbose when skipping LVS due to lack of schematic netlist
2020-09-27 16:45:46 +02:00
f5af17e1ba
Fix file somehow left out of last commit.
2020-09-23 17:51:48 +01:00
6dae769944
Progress reporting for connectivity tests.
...
Also makes via annulus terminology more consistent.
2020-09-23 16:28:00 +01:00
6d18f20093
ADDED constraints reporter for diagnosing constraints.
...
Also fixes an issue with via type property and makes property
comparisons in rule case-insensitive.
Fixes https://gitlab.com/kicad/code/kicad/issues/5754
2020-09-23 01:14:35 +01:00
9efc91c107
fix 2 minor compil warnings and make a sentence more easily translatable
2020-09-22 16:56:55 +02:00
18e17abd6a
Rename "Keepout" to "Rule Area"
...
These objects can now be used in advanced DRC rules and
not just for keeping things out. Also remove the restriction
that at least one of the "basic" keepout rules must be set,
so that these areas can be used for more advanced rules.
2020-09-21 23:55:02 -04:00
408cd20294
drc: Test all zone layers for intersection
...
Zones can span multiple layers so we need to test each explicitly.
Fixes https://gitlab.com/kicad/code/kicad/issues/5750
2020-09-21 20:40:50 -07:00
1b77c4c270
Mention rule priority system in Syntax Help and Clearance Report.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5647
2020-09-21 11:59:27 +01:00
89dcc46898
Coverity cleanup and remove unused variables
2020-09-20 02:20:41 +01:00
db5de738ae
Apply rules commutatively.
2020-09-19 18:48:11 +01:00
d402d93487
Implement shape routines for DIMENSION_Ts.
...
This allows them to participate in DRC and PNS.
Fixes https://gitlab.com/kicad/code/kicad/issues/5712
2020-09-19 14:16:00 +01:00
67b5d24995
Support ESC & Cancel for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5698
2020-09-18 22:14:00 +01:00
73fc00ee69
Collapse VIA_TOO_SMALL and MICROVIA_TOO_SMALL into VIA_DIAMETER.
...
We'll also check too large in future....
2020-09-18 16:50:41 +01:00
90b147a914
Add DRC_ITEM definition for DRC_VIA_DIAMETER.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5695
2020-09-18 13:32:44 +01:00
a53f3899d4
Initialize variables properly
2020-09-18 11:17:37 +01:00
7b2a111a1c
Implicit rules go first so that other rules will take priority.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5687
2020-09-17 20:13:39 +01:00
0f3d2147aa
Performance enhancements for DRC.
2020-09-17 20:13:39 +01:00
8e530db633
Reporting must be kept inside the REPORT macro.
...
Reporting is run on a single clearance where performance doesn't
matter much. Doing the string building during a DRC, however, kills
performance.
2020-09-17 20:13:39 +01:00
a3d65a2b43
Smoother progress reporting for DRC checks.
...
Also moves Messages tab out to an overlay, and restores the longer
messages now that messages are no longer a textbox in the upper right.
2020-09-17 20:13:39 +01:00
2b43ffd12d
Better error reporting; better nullptr safety.
...
Also clears the marker lists before running a DRC, and sets
the drcRun flags afterwards so that the notebook tab counts
get updated.
Fixes https://gitlab.com/kicad/code/kicad/issues/5659
2020-09-16 22:14:41 +01:00
ce3819abf8
Remove redundant clearances from DRC dialog. Fold progress bar in.
2020-09-16 16:06:29 +01:00
c0f83b30d3
Minor reformatting and performance improvement.
2020-09-16 16:04:28 +01:00
b993a29695
drc: fix heap overflow
2020-09-16 13:45:12 +02:00
e137d61b29
Fix typo
2020-09-16 11:46:16 +02:00
c4b66e7cd3
drc/drc_test_provider: Fix a crash due to code change, at least on Windows.
...
The new code has not a lot of change, and is a bit cleaner.
2020-09-16 11:46:16 +02:00
652a59b781
Fix null pointer use
2020-09-16 09:21:39 +02:00
75ffce1a0b
ADDED: Leader dimension object
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5555
2020-09-15 23:37:38 -04:00
b4229d9a3e
Fix testcase crash when progressReporter was null.
...
(And it helps if the DRC tester you're trying to test is actually
in the make file.)
2020-09-15 22:25:12 +01:00
6a7266d589
Only update DRC progress reporter if the reporter exists
...
The DRC engine might not have a reporter when run headless
2020-09-15 21:18:58 +01:00
b6a8e165c3
Don't allow schematic/pcb DRC tests when in standalone mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5635
2020-09-15 21:14:11 +01:00
e2e229da96
Finish exorcising the old DRC system.
...
This moves the various BOARD_ITEM calls to the new system, and make
the DRC_ENGINE long-lived so that it can field those queries.
2020-09-15 20:15:46 +01:00
aa7e021bfc
Remove translated null strings
...
Also improves translatability by separating clauses
2020-09-15 08:35:09 -07:00
665212341d
Cleanup (consistent naming, 100-char line width, message precision).
2020-09-15 12:07:31 +01:00
514da2f886
Move DRC dialog to new DRC engine.
2020-09-14 22:39:36 +01:00
52d9a47d5b
Fix endless loop in drc
...
Need to allow looping to negative when decrementing
2020-09-14 12:25:25 -07:00
ff0a728753
Fix a few I18N issues.
2020-09-14 10:02:07 +02:00
748bee1bc7
Hook up netclasses and board minimums to new DRC engine.
...
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
2020-09-13 17:08:24 +01:00
d47d119d5f
Compile layer test into CONSTRAINT_WITH_CONDITIONS.
...
Also processes constraints in correct order for priority (reversed)
and removes multiple-expression-conditions for a single constraint
(which is not supported in the grammar).
2020-09-13 17:08:24 +01:00
8420fcc33b
Cleanup.
2020-09-13 17:08:24 +01:00
5d9301d394
Adjust isErrorLimitExceeded so it can be used for severity==IGNORE.
2020-09-13 17:08:24 +01:00
1aa38b8f82
drc_rule.cpp: avoid crash with a incorrect (broken or too old?) drc_rule file.
...
The crash was due to a null pointer not tested.
2020-09-12 11:26:53 +02:00
5be887a60f
Iron out some wrinkles in the DRC migration.
2020-09-12 01:57:37 +01:00
8ac7288696
Fix a crash bug loading DRC rules.
...
Also moves the clearance report to the new DRC engine.
2020-09-12 00:46:55 +01:00
ce2937a399
Move rest of DRC tests to kicad.
2020-09-11 23:14:12 +01:00
5424d6fa09
Move new clearance tests into kicad.
2020-09-11 21:26:57 +01:00
965a32077d
Fix compile error
2020-09-11 08:40:36 -07:00
cc86630f11
Start pulling new DRC engine into Kicad.
2020-09-11 16:04:11 +01:00
6b4a6f4d3e
Restore min seg limit for rounded-corner pads.
...
It suffered from a cacophony of errors, starting with an errant
comment that made it later look like a bug. Sigh.
2020-09-11 14:41:45 +01:00
e2bc7557cc
Clean up arc/circle polygonization.
...
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
2020-09-11 11:23:49 +01:00
fc1665ff28
ADDED Clearance Inspector.
2020-09-10 20:58:38 +01:00
e782794f96
Flesh out object properties and DRC Rule syntax help.
2020-09-05 17:44:59 +01:00
f1f8f746f4
Also resolve worksheet textVar refs in DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5506
2020-09-04 21:55:10 +01:00
ec576b5dfa
DRC checks need to be done on current layer.
...
Don't be fooled by the name "segment". It might be a via which is
on multiple layers....
Fixes https://gitlab.com/kicad/code/kicad/issues/5503
2020-09-04 15:05:03 +01:00
007580c4b8
ADDED pad:pin checks for DRC "Test footprints against schematic".
2020-09-04 14:07:42 +01:00
d1006138fd
ADDED holeWallPlatingThickness to AdvancedCfg.
...
Used for zone filling and DRC hole collision testing. Allows us to
calculate the actual hole size from the finish hole size.
Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
38e9217d54
Consolidate all DRC epsilon/threshold values to a single advancedCfg setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5464
2020-09-03 15:03:09 +01:00
9a8dd6312b
Fix formatting.
2020-09-03 15:03:09 +01:00
4e885990b8
Don't keepout a keepout's own footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5371
2020-08-28 11:05:58 +01:00
aa84bd6283
Use the right sign when dealing with the clearance epsilon.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5313
2020-08-22 20:03:46 +01:00
f95651841e
Report all extra footprints, even if they're duplicates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5303
2020-08-22 16:20:18 +01:00
93ef18d775
Fix typo where two footprint warning messages were transposed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5303
2020-08-22 16:20:18 +01:00
ade7f529b8
Switch shared_ptr creation to using make_shared
2020-08-16 12:37:50 +01:00
ec5040aff5
Fix missing 'else' and EOF processing, both of which cause crashes.
2020-08-14 22:11:04 +01:00
519bc80394
Replace error reporting in DRC rule compiler.
2020-08-13 18:47:41 +01:00
e907e43bd9
pcbnew/drc: post-rebase fixes
2020-08-13 14:50:59 +02:00
d937fadd6f
Migrate RC_ITEM to use shared_ptr
2020-08-13 14:50:59 +02:00
0c9d08249f
Fix crash where dummy edge doesn't have a valid parent.
2020-08-13 00:07:59 +01:00
393bb0fd83
Fix assert where geometry routine wasn't ready to handle layers.
...
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
463100d67f
Remove a long-standing hack to keep divots out of adjacent zones.
...
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
2c8d20207e
Allow micro-via to begin/end in middle layers
...
Microvias can be drilled through adjacent layer pairs, not just F_Cu and
B_Cu
2020-08-10 03:27:27 +00:00
41edf5c5bf
Updating DRC to handle vias with differing layers
2020-08-10 03:27:27 +00:00
5fc6b74c89
ADDED: Remove unused pads
...
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
9b3ff5af47
Fix a few I18N issues.
...
Especially keywords should not be included in translated strings.
2020-08-09 20:38:35 +02:00
c6e388db14
Implement an app progress indicator in the taskbar
...
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
2020-08-09 10:55:00 +00:00
02bf5d27df
Fix crash when a DRC rule specifies an empty zone as a keepout.
2020-08-08 16:25:30 +01:00
db501c2002
Fix issue with doing DRC on a multi-layer zone.
...
Testing for an intersection of layers between the zone and the
item (track in this case) isn't enough: we need to test for the
presence of the item on each layer of the zone.
Fixes https://gitlab.com/kicad/code/kicad/issues/5102
2020-08-07 22:40:18 +01:00
1671c3356d
Fix typo where "continue" got put on wrong side of closing brace.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5100
2020-08-07 22:40:18 +01:00
e5b50d90a7
Update DRC rules to new layer and disallow grammars.
...
Also adds support for hooking rules up to named zones.
Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
f27661fa39
Be more flexible with user input; more multibyte safety.
2020-08-06 19:38:06 +01:00
9c9fdb2569
More performant (and more correct) deletion of DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5057
2020-08-04 11:45:07 +01:00
c56599ab07
Allow ERC/DRC markers to be deleted without deleting exclusions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4953
2020-08-02 22:45:48 +01:00
6d319e5bf7
Both pads must have nets to be shorting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5047
2020-08-02 17:05:13 +01:00
fdb23d1a2d
Add DRC check for items (pads for now) shorting two nets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4955
2020-07-30 21:42:23 +01:00
577c1be391
Report all DRC rule errors, not just the first.
2020-07-30 14:27:42 +01:00
5a1b1c544a
Add layer to rule grammar.
2020-07-30 14:27:42 +01:00
89a953e039
Migrated GetEffectiveShape(s) to SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
0fecb5f277
Be more explicit about string/character conversions.
...
This *may* fix the bug where a layer name isn't displayed correctly
in the error dialog. But probably not.
2020-07-28 20:44:40 +01:00
bf445c1a95
Performance enhancements.
...
1) cache pad polygon outlines
huge improvement in connectivity performance and a decent
improvement in DRC performance
2) don't pre-allocate CONTEXT stack
significant improvement in DRC rule performance
2) don't keep re-encoding strings
decent improvement in DRC rule performance
2020-07-25 13:03:33 +01:00
f97c50bfde
Give excluded DRC items their own layer.
...
(And fix a bug with the new mulit-layer zones and rule-based keepouts
at the same time which prevented me from testing it.)
Fixes https://gitlab.com/kicad/code/kicad/issues/4954
2020-07-24 01:28:25 +01:00
6529e339a9
Don't store context in the uCode. (It's not thread-safe.)
...
Although it does give some pretty funny results when filling zones.
2020-07-23 22:21:13 +01:00
a6b6084a60
Add preflighting for DRC rule function calls.
2020-07-22 14:33:32 +01:00
c52df811ae
Add expression eval to constraint min/max/opt values.
...
Also adds error reporting for above.
2020-07-21 23:43:10 +01:00
095937563b
Hook libeval compiler up to rule parser
...
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
2020-07-20 22:11:53 +01:00
998c216487
Remove some nag tests which keep you from doing a DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4845
2020-07-09 16:22:59 +01:00
5226d6b4df
libcommon build: add NGSPICE_INCLUDE_DIR in include list (similar to Eeschema build).
...
Useful when ngspice is build by the developer in a specific folder.
Fix also an other minor compil warning.
Fixes #4851
https://gitlab.com/kicad/code/kicad/issues/4851
2020-07-09 08:46:59 +02:00
d85a707385
Move rest of DRC to SHAPE collision architecture.
2020-07-06 20:00:50 +01:00
2a1550d1d2
Don't crash when failing to deserialize old exclusions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4820
2020-07-06 12:53:55 -04:00
0d8c6d43a8
fix minor I18N issues.
2020-07-06 13:47:42 +02:00
8ffa86a63f
get it to compile after rebase
2020-07-05 22:44:38 +02:00
8bb442ac37
pcbnew: try to compile 'old' DRC alongside the new prototype
2020-07-05 22:44:38 +02:00
12b4a55ae8
Port Eeschema to new project settings
...
DRC/ERC error serialization changed to use explicit tokens
Old stored severities and ignored errors are discarded
2020-07-02 22:08:54 -04:00
c0aa6965de
Migrate PcbNew project settings to new framework
...
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
2020-07-02 22:08:54 -04:00
441dfa30f0
Return individual custom pad shapes instead of a SHAPE_POLY_SET.
...
Also implements an optional pointer to return the actual distance
from all the SHAPE collision routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/4774
2020-07-02 17:09:15 +01:00
424d551054
Cache pad bounding boxes for performance.
...
Also allows us to return to a LOD test for pad numbers which treats
round and square pads the same.
2020-07-01 16:57:00 +01:00
40a72d9530
Add SH_RECT handling to 3D shape conversion.
...
Also add some debugging for not-implemented shape cases in other
places to catch simmilar issues in future.
Fixes https://gitlab.com/kicad/code/kicad/issues/4757
2020-06-30 18:32:31 +01:00
42296d7eb9
fix issues in DRC and fill zone, related to recent changes in code.
...
Note also: the actual clearance between 2 pads when < minimal clearance
is incorrectly calculated.
2020-06-30 12:59:26 +02:00
0d4ee39f75
CHANGED: Copper zones can be on more than one layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
d01b29ab37
Cleanup pad geometry handling.
...
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
c57c21f577
Pad bounding radius is from pad centre, NOT shape centre.
2020-06-22 20:36:54 +01:00
7877e4083e
Don't match to an unknown layer.
2020-06-20 14:34:53 +01:00
32738862b8
Fix build error in linux
2020-06-18 09:52:04 -07:00
76d1b8bfa1
Make sure selectors match against user layer names.
...
Also allows for user specification of units in rule constraints.
2020-06-18 15:38:01 +01:00
a7703d1207
Cleanup Graphics to parallel Cleanup Tracks & Vias.
...
This also allows for easier migration to DRAWSEGMENT::S_RECTs by
auto-converting 4 rectilinear lines to a rectangle.
2020-06-17 18:44:39 +01:00
aeed8e6e2c
Finish implementation of DRAWSEGMENT::C_RECT.
...
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
2020-06-15 20:51:31 +01:00
d7d877241a
More explicit type conversion to attempt to fix GCC compile issue.
2020-06-10 13:41:45 +01:00
4138c8554c
Parse DRC rules when closing Board Setup dialog.
2020-06-10 12:03:37 +01:00
f4d8c30f9a
Tighten DRC epsilon value until we decide what to do about it.
2020-06-04 18:28:48 +01:00
36d197d8b6
Increase pad clearance test epsilon to polygonization max error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4604
2020-06-03 18:47:19 +01:00
d2cd4de280
Allow rules to operate on hole when hole-to-track testing.
2020-06-03 12:11:50 +01:00
6d5b6c8b81
A bit more refactoring to get code out of the DRC tool.
2020-05-29 22:06:48 +01:00
39ec63c4e9
Fix some inconsistencies in clearance priorities.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4555
2020-05-29 13:41:45 +01:00
9f2be3714f
Add unresolved variable testing for worksheet items.
2020-05-28 17:36:22 +01:00
e61185775f
Implement testCopperDrawItem() for POLYGON draw items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4549
2020-05-26 23:48:21 +01:00
1db799d841
Implement "disallow" rules and integrate with keepout settings.
2020-05-25 22:51:47 +01:00
c415130de9
Improve parse error messages.
2020-05-25 22:51:47 +01:00
160981ee71
Better error reporting for DRC rule parsing.
2020-05-25 22:51:47 +01:00
416d82727f
Redo DRC rules to get ready for new system.
2020-05-25 22:51:47 +01:00
9a08ee2778
Add a 1nm tolerance to prevent rotated pad roundoff errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4139
2020-05-22 18:04:29 +01:00
0a9adaef73
Don't use bboxes for non-cartesian-rotated pad collision testing.
2020-05-22 14:12:56 +01:00
69f121d907
Another attempt to get DRC and status bar to share message content.
2020-05-22 14:12:56 +01:00
4f14769ce1
Use both pads when calculating pad-to-pad clearance.
2020-05-21 21:26:36 +01:00
a5b53a623d
Update status bar with clearance & rule sources.
2020-05-21 21:26:30 +01:00
98be50883d
Fix bug in single-item layer matching.
2020-05-21 11:25:39 +01:00
89c46e6834
Fix typo in DRC check of rule-based track-width.
2020-05-19 21:17:49 +01:00
f4d7c323f5
Coverity fixes
2020-05-18 22:58:28 -04:00
7d537e83ea
Match layers only if both items are on the given layer.
2020-05-18 22:37:37 +01:00
ae9662c5cd
Fix some unitialized variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4477
Fixes https://gitlab.com/kicad/code/kicad/issues/4473
2020-05-18 21:30:38 +01:00
d046f165de
Fix board outline issues.
...
1) Don't try and do board-edge clearance checking against a
synthetic polygon constructed because we didn't find any edges.
2) Check pads against board edge.
3) Don't report vias as "Track too close to board edge".
2020-05-18 21:11:01 +01:00
cec857c0f4
Complete hookup of zone filler to new clearance engine.
2020-05-18 19:20:46 +01:00
05855a5a1c
Performance enhancements for DRC.
2020-05-18 13:38:17 +01:00
8dc6f8e82b
Allow empty rules files.
2020-05-17 15:49:02 +01:00
75b139c7b4
Move hole testing to DRC client and improve performance.
2020-05-17 15:49:02 +01:00
3656297f99
Add a simple editor for DRC rules.
2020-05-16 23:30:30 +01:00
5b07889347
Better error messages for rule parsing.
2020-05-16 20:53:49 +01:00
d3f017d825
DRC rules parser and engine.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2182
Fixes https://gitlab.com/kicad/code/kicad/issues/2116
Fixes https://gitlab.com/kicad/code/kicad/issues/1958
Fixes https://gitlab.com/kicad/code/kicad/issues/1965
2020-05-16 15:53:05 +01:00
13493437d0
Add hole-inside-courtyard DRC checks.
...
One for NPTH and one for PTH; both default to "ignore".
Fixes https://gitlab.com/kicad/code/kicad/issues/3434
2020-05-14 22:02:47 +01:00
aedc624340
Add DRC checks for dangling vias and tracks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1999
2020-05-14 22:02:47 +01:00
74ee143d45
Add via annulus minimum.
2020-05-11 22:56:09 +01:00
2568c168a2
Silence Coverity warning.
2020-05-09 14:14:38 +01:00
8efa8af8cc
Add persistence of DRC error severities.
2020-05-07 17:51:27 +01:00
0f8c7ffd11
Add pad keepout and footprint keepout areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2365
2020-05-07 17:51:27 +01:00
e0da677d4d
Add min clearance to DRC; rename Min Via Drill to Min Through Hole.
...
Also fixes a crash bug when ignoring a DRC violoation with multiple
markers.
Fixes https://gitlab.com/kicad/code/kicad/issues/2528
2020-05-04 22:08:36 +01:00
e39d145d72
Add DRC tests for minimum drill size (based on min via size).
2020-05-04 22:08:36 +01:00
fd991db0a9
Forgot last commit.
2020-05-01 21:10:36 +01:00
9954484dfd
Don't show source in violation "name".
2020-05-01 18:49:42 +01:00
058108dd6d
There are 3 courtyard DRC checks, not 2.
2020-05-01 18:49:42 +01:00
4a60b8a776
Improve DRC error reporting and fix some bugs.
2020-05-01 18:49:42 +01:00
068874a626
Add clearance source for zone-to-zone clearance violations.
2020-05-01 18:49:42 +01:00
bba2fa3028
Fix bug with doubling the pad corner radius twice.
2020-05-01 18:49:42 +01:00
dfe4a00d43
Add distance reporting for copper item DRC tests.
...
Also adds some performance improvements.
2020-05-01 18:49:42 +01:00
0c20c0b4af
Fix broken hole-to-track test.
2020-05-01 18:49:42 +01:00
874f13e29e
Fix some issues with rotated oval pads.
2020-05-01 18:49:42 +01:00
5c8d712a56
Fix some issues with rotated rectangular pads.
2020-05-01 18:49:42 +01:00
1280a4d2f3
Add pre-flighting to DRC checks for performance.
2020-05-01 18:49:42 +01:00
c955f45728
Fix compile error on gcc.
2020-05-01 18:49:42 +01:00
f7e518dbc6
Add clearance sources to some DRC violation reports.
2020-05-01 18:49:42 +01:00
a56191b658
Add distances to a bunch of DRC violation reports.
2020-05-01 18:49:42 +01:00
99dcadf7e6
Introduce new KI_FALLTHROUGH macro
...
Annotate purposeful fallthroughs in switch statements with the
KI_FALLTHROUGH macro.
2020-04-25 00:44:09 +01:00
32db9eb0f1
Add some distances to a few DRC errors.
2020-04-24 22:17:45 +01:00
3f9b3e505e
Add some virtual destructors
2020-04-24 18:24:39 +01:00
1535c83b88
Lay some groundwork for adding distances to DRC errors.
...
modified: eeschema/lib_rectangle.cpp
2020-04-24 14:46:22 +01:00
9c8941e040
Remove a bunch of globals.
2020-04-16 17:34:46 +01:00
6e800bddae
Rationalize penWidth processing as first step in removing some globals.
2020-04-13 20:58:13 +01:00
41b5872f12
Add ERC & DRC checks for unresolved variables.
2020-03-30 14:15:59 +01:00
64d217edda
drc.h: replace a list of #define by an enum.
...
Due to changes in code, the reason for using #define does not exist
since a long time.
2020-03-18 10:19:46 +01:00
cee973dc04
Move ERC error reporting over to the new framework.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-16 11:06:15 +00:00
61704cb508
Initialize missing variable
2020-03-11 15:24:08 -07:00
fbd01f2f7d
DRC_TREE_MODEL: Fix incorrect display of DRC errors on linux+wxGTK 3.0
...
Fixes #4038
https://gitlab.com/kicad/code/kicad/issues/4038
2020-03-11 10:46:08 +01:00
f079c41118
Prevent the board setup dialog from opening when DRC is open
...
The board setup dialog controls DRC error visibility, so the
two dialogs shouldn't be open at the same time to prevent
data contention.
Follow-up to https://gitlab.com/kicad/code/kicad/-/issues/4023
2020-03-08 15:55:14 +00:00
1e4ae5d526
Bug fix for DRC tree view on MSW.
2020-03-07 18:52:30 +00:00
44b8bb8f60
Fix a bug when deleting DRC markers from their child items.
2020-03-06 16:23:44 +00:00
d20f36511f
Fix issue with severities not get initialised in DRC_TREE_MODELs.
2020-03-04 21:52:30 +00:00
0894674869
Save severities settings in the DRC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3978
2020-03-04 21:52:30 +00:00
b7cd0c54c2
Fix compil issues, especially on Windows:
...
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
2020-03-04 10:48:18 +01:00
85c2e0d23a
Add user-defined severities, exclusions and colors to DRC markers.
...
Exclusions are currently persisted in the project file.
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-04 00:39:28 +00:00
3860ab9f0c
Fix issue returning pointers to items inside std::vector.
...
(When the vector is re-allocated your pointers become bogus.)
2020-02-27 22:00:51 +00:00
82ae9db262
Another variation on the wxDataViewCtrl issue....
2020-02-26 17:56:47 +00:00
a2234b348d
Another attempt to work around wxDataViewCtrl bug on GTK.
2020-02-26 17:35:10 +00:00
4c563b541e
Another attempt to get GTK wxDataViewCtrl to reload properly.
2020-02-26 14:41:12 +00:00
7c6f7e6b01
Try some undocumented wxWidgets call to fix DRC.
2020-02-25 18:26:42 +00:00
0614bbc663
Silence a couple of compiler warnings.
2020-02-25 18:26:42 +00:00
4e0cb3c1ad
Another attempt at fixing Linux issue.
...
Note that I have no Linux machine, so this is shooting in the dark....
2020-02-25 13:51:59 +00:00
4b380f0dc3
Fix compile issue on Linux & crash issue on Windows.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3937
2020-02-25 12:28:05 +00:00
a4837f7d32
Move DRC dialogs to wxDataView.
...
This allows for hierarchy and better selection handling.
2020-02-24 23:19:17 +00:00
c5077aeb97
Move weak-reference stuff to UUIDs.
2020-02-24 23:19:17 +00:00
625249322e
Pcbnew: regroup drc files to the already existing drc folder.
2020-02-19 10:31:32 +01:00
fbeb0709ef
Formatting cleanup.
2020-02-03 19:35:48 +00:00
7c28c3838a
Comment-only changes
...
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
11ff16be4e
Switch to scoped enums
2019-12-20 14:11:39 +00:00
c4d853c1e8
SHAPE_LINE_CHAIN: Remove element access
...
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
2019-12-12 13:54:48 +00:00
fbfbb64387
A bit of cleanup of stale DRC code.
2019-06-04 13:56:54 +01:00
568c8c336b
Move DRC control to a tool; move assorted commands to ACTIONS.
2019-06-03 21:08:30 +01:00
d1877d7c1b
Moving modules from DLIST to std::deque
2019-06-01 09:53:23 -07:00
40309a17ef
pcbnew: Check exact overlapping polygons
...
Checks for polygon collisions in the outline when the polygon contains
two or more segments that exactly overlap. This also places the DRC
marker at the location where the collision happens.
Fixes: lp:1818163
* https://bugs.launchpad.net/kicad/+bug/1818163
Fixes: lp:1818218
* https://bugs.launchpad.net/kicad/+bug/1818218
2019-03-01 09:38:33 -08:00
8297ab24e4
DRC: Break out courtyard overlap function
...
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
2019-01-23 13:27:52 -05:00
e6edc1b670
DRC: Make the marker factory a separate class
...
This separates the "newMarker" functions from the DRC class. These
are moved to a new class, DRC_MARKER_FACTORY, which is now responsible for
constructing suitable markers from BOARD_ITEMS.
The reasons for this are:
1) Allow DRC related functions to access theese functions without having
to bake these functions into the main DRC class.
2) Thereby simplify the DRC class interface
3) As DRC_MARKER is now a small class with public interfaces, it's
possible to put unit tests on these functions.
The motivation here is to allow to start to split out pieces of DRC
into separate classes.
2019-01-23 13:27:52 -05:00
Jeff Young
Ian McInerney
Werni
jean-pierre charras
Marek Roszko
David Shah
Seth Hillbrand
Wayne Stambaugh
Jon Evans
Tomasz Wlostowski
Mikolaj Wielgus
Seth Hillbrand
John Beard