67985510a8
Fix selecting pads of footprints in groups.
2022-10-21 17:13:24 +03:00
f95e77499b
Sim: Make exception messages slightly more verbose
2022-10-21 08:15:29 +02:00
9819fa43dd
Sim: Allow principal value in Value field to be followed by regular params
2022-10-21 08:14:13 +02:00
585fac19c6
Copy connected-only and keep-top-bottom properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12691
2022-10-21 00:05:11 +01:00
6fd195c389
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-21 00:05:11 +01:00
f9659a7e7c
Fix kicad-cli not being installed at all
2022-10-20 18:20:27 +00:00
0ae2a8483e
Debugging aid.
2022-10-20 18:37:48 +01:00
3451506d25
Slight performance improvement.
2022-10-20 18:37:48 +01:00
323c04af2c
Fix order-of-ops issue with calling collide before tesselating.
2022-10-20 18:37:48 +01:00
283dba00c3
Fix the "None" define with a hammer
...
The X.h definition of None creeps in older Linux distributions in
multiple places. Better to just force undefine it because we never need
it
2022-10-20 08:24:09 -07:00
0a2fa51d91
Clipper2: fix an incorrect compil otion on mingw
2022-10-20 11:29:31 +02:00
6aa515e2f8
board_stackup_manager: fix incorrect behavior when adding a new dielectric layer.
...
Fixes #12680
https://gitlab.com/kicad/code/kicad/issues/12680
2022-10-20 11:27:35 +02:00
d01dcc1c51
Sim: Interpret anything starting with .inc as .include
2022-10-20 05:13:32 +02:00
53fea46fed
Re-order headers to avoid X11 None def
...
X.h helpfully defines the word "None" because surely no one would ever
use that as a token, right? Right?
2022-10-19 20:04:00 -07:00
00c04e74ed
Sim QA: Test LTspice parameters and ako models of BJTs
2022-10-20 04:00:33 +02:00
662f6c7d83
Sim: Don't match newlines in model names
...
This caused errors in AKO models with no overrides.
2022-10-20 04:00:33 +02:00
7ad927671d
Sim Ltspice compat: Narrow ignoring undocumented parameters
2022-10-20 04:00:33 +02:00
5878749ed2
Sim LTspice compat: Ignore undocumented LTspice diode parameters
2022-10-20 04:00:33 +02:00
27add591ec
Add Clipper2
...
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper. The changes should be
mostly transparent.
Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.
Additionally, the inflation options are slightly different. We cannot
choose the fallback miter. The fallback miter is always square. This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.
Lastly, we currently utilize the 64-bit integer coordinates for
calculations. This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system. This may not be the case for older
systems, particularly 32-bit systems.
2022-10-19 16:25:45 -07:00
85805bdad7
Fix broken legacy file format symbol instance data import.
2022-10-19 12:23:28 -04:00
c64b4b8179
Update the formulas for Tee and Pi Attenuators
...
This makes clear that we are utilizing the voltage attenuation formula while keeping the correct formulation as it is implemented in the code
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12659
2022-10-19 15:49:09 +00:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
c4db7337d0
NETLIST_EXPORTER_SPICE: add missing switch to "C" locale (missing LOCALE_IO).
...
It breaks spice netlist in countries using a comma as floating number separator.
2022-10-19 11:50:35 +02:00
b9b5a66bfb
French translation update
2022-10-19 09:04:13 +02:00
c4fc9c1b16
Sim QA: Add tests for AKO and LTspice diodes
2022-10-19 06:56:21 +02:00
7378aaae9d
Sim: Ignore the "mfg" parameter in all models
2022-10-19 06:53:39 +02:00
952f3da53f
Sim: Only set sim command if the sheet sim command is different
2022-10-19 03:02:32 +02:00
f68df09696
Sim: Fix analysis set from GUI
2022-10-19 02:32:50 +02:00
1965411bf5
Sim: Remove the parsing exception for LTspice compat
...
Silently ignoring this may be a cure worse than disease.
2022-10-18 23:19:48 +02:00
42acabb5a9
Fix a mistake in uopamp.lib.spice
2022-10-18 22:38:49 +02:00
2a13c0af2e
Revert commented out code.
2022-10-18 16:07:14 -04:00
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
1964087960
Fix some instance-data issues in netlist exporters.
...
Also removes the final requirements for setting the current sheet so
that we no longer need to do a save/restore.
2022-10-18 17:26:34 +01:00
ae671c07e1
Commit missing uopamp.lib.spice
2022-10-18 17:38:23 +02:00
8d40bf25d6
Need to setup outline mode stuff if it's turned on late.
2022-10-18 14:41:27 +01:00
1f0fa3ef63
Fix bug in new optionally-flashed via/pad zone fill logic.
2022-10-18 14:02:47 +01:00
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
437d2c4589
Overhaul of remove-unconnected's zone filling and drawing strategies.
...
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
ebd8ebb756
Add information about CC0 license
2022-10-18 06:16:50 +02:00
e5704d7058
Update uopamp.lib.spice to be the same in all QA tests
2022-10-18 06:15:54 +02:00
6e874f4c1e
Ngspice: Preload a basically empty circuit to avoid error messages
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12481
2022-10-18 05:48:01 +02:00
9eb3854794
Bump vcpkg for patched wxpython
2022-10-17 19:49:12 -04:00
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
bd145a4904
Update metadata translation and devlist
...
Not all elements in the keyword section should be exported for
translation. Also, retire the launchpad devlist link
2022-10-17 10:53:09 -07:00
e50f6bd272
Update Translations
2022-10-17 10:06:43 -07:00
4e39316fb7
Translated using Weblate (Ukrainian)
...
Currently translated at 84.2% (6640 of 7885 strings)
Translation: KiCad EDA/master source
Translate-URL: https://hosted.weblate.org/projects/kicad/master-source/uk/
2022-10-17 19:05:24 +02:00
6104f933e9
Translated using Weblate (Ukrainian)
...
Currently translated at 84.2% (6640 of 7885 strings)
Translation: KiCad EDA/master source
Translate-URL: https://hosted.weblate.org/projects/kicad/master-source/uk/
2022-10-17 19:05:24 +02:00
4a6e336faf
Translated using Weblate (Spanish (Mexico))
...
Currently translated at 100.0% (7885 of 7885 strings)
Translation: KiCad EDA/master source
Translate-URL: https://hosted.weblate.org/projects/kicad/master-source/es_MX/
2022-10-17 19:05:23 +02:00
f89576b6ca
Translated using Weblate (Serbian)
...
Currently translated at 12.3% (971 of 7885 strings)
Translation: KiCad EDA/master source
Translate-URL: https://hosted.weblate.org/projects/kicad/master-source/sr/
2022-10-17 19:05:23 +02:00
54a50e87d0
Translated using Weblate (Danish)
...
Currently translated at 64.6% (5100 of 7885 strings)
Translation: KiCad EDA/master source
Translate-URL: https://hosted.weblate.org/projects/kicad/master-source/da/
2022-10-17 19:05:23 +02:00
Alex
Mikolaj Wielgus
Jeff Young
Mark Roszko
Seth Hillbrand
jean-pierre charras
Wayne Stambaugh
Huanyin Liu
Ivan Chuba
Stanislav Kaliuk
Ulices
___davidpr
Mads Dyrmann