Seth Hillbrand
1b8b216ac8
Bitmaps are not actually copper
...
We report bitmaps as being 'on' a copper layer because they are
associated with it but they are not actually physical parts so should
not be included in the DRC checks
Additionally, Bitmaps effective shape starts are the top left corner
rather than the center (unclear why that was there in the first place)
Fixes https://gitlab.com/kicad/code/kicad/issues/14065
2023-02-23 14:16:28 -08:00
Marek Roszko
aacc9746e3
Yeet the last of wxSize/wxPoint to stop leaking gdicmn everywhere
2023-02-18 22:57:18 -05:00
Jon Evans
f7d59f2e89
Enable properties panel in footprint editor
2023-02-17 20:35:56 -05:00
Alex
ecb28ddf1c
Prevent ghost image after canceling bitmap placement.
2023-02-17 03:53:44 +03:00
Jeff Young
978c2b074e
Negative clearance means test will be ignored, not rule.
2023-02-16 17:39:47 +00:00
Mike Williams
4b07e3e413
Common Actions: Find Previous
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8968
2023-02-14 08:21:37 -05:00
Mike Williams
3e715c99c8
Swap: take S key now that it's available
2023-02-14 07:42:06 -05:00
Jeff Young
499b58f505
ADDED: user-specified gap and linewidth for bounding hull creation.
2023-02-12 23:16:45 +00:00
Marek Roszko
4665823089
Turn on and fix MSVC compliance mode issues
...
We want /permissive- to enable debug performance improvements in MSVC 17.5+.
This flag is also default under C++20 so we'll have to deal with these compile issues anyway at some point in the future.
In particular, MSVC becomes pedantic about ternary types.
See https://learn.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance?view=msvc-170#ambiguous-conditional-operator-arguments
MSFT cites https://cplusplus.github.io/CWG/issues/1805.html
2023-02-12 16:30:37 -05:00
Jeff Young
362d85ef50
Special selection mode when in high-contrast with courtyard layer active.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13521
2023-02-11 21:11:07 +00:00
Jon Evans
b888714ed5
Don't discard temporary item being placed if placement is rejected
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13697
2023-02-11 08:40:33 -05:00
jean-pierre charras
538ee12188
Pcb editor: fix crash when trying to activate the "place anchor" tool.
...
"place anchor" tool exists only in the Fp editor. However, the hotkey
to activate this tool was also active in the board editor. Now disabled.
2023-02-09 16:29:33 +01:00
jean-pierre charras
fcefb5f86d
Re-allows selection of bitmaps not owned by a footprint.
...
It was broken by my commit f8051d95
Fixes #13747
https://gitlab.com/kicad/code/kicad/issues/13747
2023-02-02 18:09:37 +01:00
jean-pierre charras
f8051d954a
Better handling of PCB_BITMAP items in a footprint.
...
- Ensure they can be erased in the FP editor
- Ensure they cannot be selected in the PCB editor (they are not show)
Fixes #13714
https://gitlab.com/kicad/code/kicad/issues/
2023-01-31 11:16:38 +01:00
Chris Morgan
ce06171561
Convert additional sprintf to snprintf
2023-01-30 16:22:03 +00:00
Jeff Young
b1018e8eeb
Relax no-zone-commands constraint on interactive placer tools.
...
These tools are initialized with an item (via/pad/microwave) so there's
no way to tell between during-placement and idle. Besides, they don't
update the ratsnest so they probably won't fall afoul of the original bug
(https://gitlab.com/kicad/code/kicad/-/issues/12736 ).
Fixes https://gitlab.com/kicad/code/kicad/issues/13686
2023-01-28 10:42:24 +00:00
Alex
52edbf91dc
Better synchronization of various ratsnest visibility controls.
2023-01-27 10:01:12 +03:00
jean-pierre charras
b2f6c13b6a
Fp editor and Fp viewer: fix missing info on msg panel after loading a fp
...
Fix also duplicate/not used code
Fixes #11404
https://gitlab.com/kicad/code/kicad/issues/11404
2023-01-25 17:47:04 +01:00
Mike Williams
b8352b07c5
PCB: Immediate mode copy should deselect if hover selecting
2023-01-19 09:45:47 -05:00
Jeff Young
f45d44a639
Don't leave temp footprints attached to a board.
2023-01-18 00:46:59 +00:00
Jeff Young
f0b2902b8c
Don't allow quit while zone filler is running.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13551
2023-01-16 16:01:45 +00:00
Jeff Young
91c5bb9175
Block user-initiated zone-fill actions, but not system ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13536
2023-01-15 19:16:36 +00:00
Jon Evans
c530bdb5a1
Rename GetSelectMenuText to GetItemDescription
...
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
Jeff Young
2cbb66d70d
Dim other pads when in pad edit mode.
2023-01-06 11:13:57 +00:00
Jon Evans
1ccd387c8d
Exit a group when selecting a component outside it
...
We had this filter in place when doing mouse selection, but not when
the selection comes from another tool event.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13398
2023-01-05 20:32:52 -05:00
Seth Hillbrand
126225866b
Don't add footprint components to PCB group
...
Footprint components are only group-able inside of the footprint editor
Fixes https://gitlab.com/kicad/code/kicad/issues/13396
2023-01-05 15:38:07 -08:00
qu1ck
7dfa100ff0
Correctly refresh the board after action plugin run and maintain
...
selection
2023-01-05 14:05:15 -08:00
Jeff Young
cbe5340d37
Allow pads in multi-select mode when nothing else would be selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13371
2023-01-05 17:02:50 +00:00
Jeff Young
67e6603699
Move updateUnits functionality to where it can be shared.
...
Also call it when adding a footprint via the chooser.
Fixes https://gitlab.com/kicad/code/kicad/issues/13340
2023-01-02 22:12:26 +00:00
jean-pierre charras
07b4f88e6b
Pcbnew: Fillet Lines tool does not set line width and layer.
...
When fillet a polygon or a rect, the resulting lines and arcs had incorrect
width and layer.
Fixes #13338
https://gitlab.com/kicad/code/kicad/issues/13338
2023-01-02 16:52:08 +01:00
Jeff Young
20f2232d4e
Adjust dimension units when placing footprints on board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13339
2023-01-02 12:39:35 +00:00
jean-pierre charras
e8114dc49a
Minor compil and Coverity warnings fixes.
2023-01-02 10:21:42 +01:00
jean-pierre charras
16fd586c41
Do not prune items/layers when copying the clipboard to the FP editor: all are allowed
...
(Some are disabled only for GUI)
Fixes #13334
https://gitlab.com/kicad/code/kicad/issues/13334
2023-01-01 13:35:05 +01:00
Jeff Young
4c63b4e061
Class name <-> file name sync.
2022-12-29 18:05:57 +00:00
Mike Williams
4bb1b4a3d2
Router: settings dialog fixes
...
Make keyboard activation of OK save settings instead of cancelling.
Also, fix the string for the shortcut so that it works (shortcut
unchanged).
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13303
2022-12-29 10:31:12 -05:00
Greg Davill
3b55f9e326
PCB Editor: Inform tools when selecting/unselecting net
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13308
2022-12-29 13:46:20 +00:00
Mike Williams
411efe6f3d
PCB Editor: Allow mouse drag of group-of-groups
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13076
2022-12-28 15:23:52 -05:00
Mike Williams
741d1e043a
PCB Editor: make Mirror menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13230
2022-12-27 14:18:47 -05:00
Jon Evans
ee0a41e3bc
Remove excess calls to SelectedItemsModified
...
We really don't want to post these events unless the *selected* items
were actually modified, since it results in a redraw of the properties
panel (which disturbs edit state and causes flicker on MSW).
Now the COMMIT system is responsible for sending this event iff the
commit touches items that are selected.
Side note: UpdateMsgPanel is useless on every app except pl_editor, so
it can probably be refactored/removed at some point.
2022-12-26 20:57:58 -05:00
Jeff Young
1f3727f548
Assigning a netclass has no meaning in fp editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13267
2022-12-26 20:33:04 +00:00
Jeff Young
5dce8323e8
KIGFX::REPAINT is not enough if the item isn't in the view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11656
Fixes https://gitlab.com/kicad/code/kicad/issues/13217
2022-12-24 17:18:22 +00:00
Seth Hillbrand
1cc9792cdb
Fix snapping dist when disabling grid
...
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
2022-12-21 17:47:45 -08:00
Mike Williams
47dc2379d8
PCB: Fix issues with grab unconnected
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13232
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13233
2022-12-21 15:10:19 -05:00
Alex
75053cfc57
Remove normally unused code from Move function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13222
2022-12-21 19:06:32 +03:00
Mike Williams
5d94d2634e
PCB Editor: make locking menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5202
2022-12-21 10:34:54 -05:00
jean-pierre charras
44ab6876d9
fp editor: remove useless "Unroute Selected" from context menu.
...
Fixes #13229
https://gitlab.com/kicad/code/kicad/issues/13229
2022-12-21 13:11:51 +01:00
Mike Williams
bd24e85289
PCB: Add Copy With Reference to the Positioning Menu
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11947
2022-12-20 11:54:05 -05:00
Jeff Young
5327ea5823
Respect selectabiltiy when adding wholy-selected groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13092
2022-12-15 17:57:58 +00:00
Seth Hillbrand
279edcefdc
Don't break tracks without snap
...
If the user asks to not snap to a track, we should also prevent the
track from snapping to the via
Fixes https://gitlab.com/kicad/code/kicad/issues/13142
2022-12-14 13:51:42 -08:00
Jeff Young
9d13e419c2
Reduce compiler warnings.
2022-12-13 00:47:19 +00:00
Seth Hillbrand
4fe35d0df1
More push/pop tool issues
...
We need to pop the move tool off when it doesn't find anything to act on
so that the pushed tools under it on the stack can re-activate
Fixes https://gitlab.com/kicad/code/kicad/issues/13114
2022-12-12 12:56:35 -08:00
jean-pierre charras
96a9ec4a0c
Enhance compatibility with V6.0 for Intersheetrefs fields associated to GLOBAL labels.
...
In V6.0, the identifier is "Intersheet References" and was not immediately
seen as Intersheetrefs field.
2022-12-12 16:38:04 +01:00
Jeff Young
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
Alex
5e8227b54a
pcbnew: Support dragging arc center in "Keep endpoints" mode.
2022-12-12 13:00:44 +03:00
Alex
3eb31befed
Fix a delay when dragging arc endpoints in pcbnew.
2022-12-12 09:39:56 +03:00
Alex
da1e5a80a8
Restore removeCorner transition in PCB editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13133
2022-12-12 07:04:20 +03:00
Alex
b01d950071
Remove start pt when collinear with neighboring pts in zone/poly draw.
2022-12-10 06:21:54 +03:00
Alex
b4b25a7009
Fix Pack & Move footprints when working with groups.
2022-12-09 20:42:35 +03:00
Alex
c1f82d0c80
Canceling Move cancels Pack too in Pack & Move footprints.
2022-12-09 20:41:56 +03:00
Alex
3d2b1aaf90
Improve H/V/45 deg mode when drawing zones and polygons.
2022-12-09 19:11:56 +03:00
Mike Williams
0e75bf02fa
Selection: refactor modifier checking
2022-12-08 14:12:12 -05:00
Alex
6d513e7ecf
Expose changing arc edit mode in arc button context menu and Preferences
...
Ctrl+Space can still be used to cycle through modes.
Fixes https://gitlab.com/kicad/code/kicad/issues/5412
2022-12-05 21:28:16 +03:00
Graham Keeth
ef83d01455
Minor string changes: "eeschema" / "pcbnew" in tooltips, and power port terminology
2022-12-04 14:29:57 +00:00
Jeff Young
96819f6c01
Better cache invalidation for text objects with references.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13059
2022-12-04 11:51:44 +00:00
Jon Evans
0bc06d506c
Properties: reselect after canceled move
2022-12-02 21:40:21 -05:00
jean-pierre charras
93c631af44
drawing_stackup_table_tool: fix incorrect color of dielectric sublayers.
...
when a dielectric has sublayers, the printed color was always the main layer color.
2022-12-02 10:41:20 +01:00
Jeff Young
20791c99ac
Allow conversion of single track segments and vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 17:15:29 +00:00
Jeff Young
6befa1c57e
A bit of cleanup to recent convert tool changes.
2022-12-01 14:53:13 +00:00
Jeff Young
4d8e73a630
Allow tracks as input to bounding hull generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 14:53:13 +00:00
Seth Hillbrand
b31349b679
Get consistent point for gfx import
...
TopLeftItem() should always return same element for our import
Fixes https://gitlab.com/kicad/code/kicad/issues/13041
2022-11-30 12:25:34 -08:00
Seth Hillbrand
cf33f33899
Standardize placement tool modifiers
...
PlaceImage, PlaceImportedGraphics and PlaceText need to handle the grid
and hotpoint snapping as well as the modifiers to disable them
2022-11-30 10:57:42 -08:00
Jeff Young
3c4c4e5166
Remove shortened debug time from zone refill message.
...
Also adds a time-out for it.
2022-11-30 17:38:02 +00:00
Jeff Young
074c087c21
Allow disabling of grid snapping while placing imported image.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13040
2022-11-30 14:38:22 +00:00
Jeff Young
98ab078905
Remember conversion strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13043
2022-11-30 14:29:16 +00:00
Mike Williams
17bb57cc73
PCB: fix stale ratsnest between moves in Move Individually
2022-11-30 09:11:37 -05:00
Jeff Young
8dbd6fee00
Go back to smaller chaining epsilon.
...
Using a large epsilon here to allow for sloppy drawing can cause
the algorithm to miss very short segments in a converted bezier.
So use an epsilon only large enough to cover for rouding errors in
the conversion.
Fixes https://gitlab.com/kicad/code/kicad/issues/12951
2022-11-30 13:26:45 +00:00
Jeff Young
19eab62516
More safety around ratsnest state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
Jeff Young
9fa8b9e49f
Fix memory leak and re-code non-memory-leak so Coverity can understand it.
2022-11-30 13:00:20 +00:00
Alex
8c468dcffc
Use ecoords for distance comparison in PCB grid helper.
...
Fixes a bug where a cursor would jump to a far location while hovering
over some 45-degree tracks.
2022-11-30 08:18:19 +03:00
Jon Evans
41ca2789a6
Get rid of shadowing warning
2022-11-29 18:12:39 -05:00
Jeff Young
abd818a426
Update msgpanel after entering or exiting group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13031
2022-11-29 21:33:04 +00:00
Jeff Young
31eb91e9e5
Infobar for slow zone auto-refill.
2022-11-29 21:09:16 +00:00
Jeff Young
b6bd74d822
Replace single zone fill under "draft" terminology.
...
Also sets Autofill Zones to default to on.
2022-11-29 18:13:36 +00:00
Mike Williams
ad6ef35c9f
PCB: Add skip action to Move Individually
2022-11-29 15:42:03 +00:00
Jeff Young
b2177718a1
Tighten up refresh logic for net & netclass references.
...
Also tightens it up a bit for text variables which can reference things
like netnames and netclasses, but also board settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/13032
2022-11-29 15:18:36 +00:00
Jeff Young
8165fc6c44
Give up trying to infer what kind of polygon the user wants.
...
In many instances there are 3 valid answers: mimic linewidths, use
centerlines, and build a bounding hull.
Fixes https://gitlab.com/kicad/code/kicad/issues/12950
2022-11-28 22:12:53 +00:00
Mike Williams
4a4fab78a3
PCB: allow swap while moving
2022-11-28 14:16:08 -05:00
Mike Williams
3042633f4a
PCB: block unroute and move individually when already moving
2022-11-28 14:16:08 -05:00
Jon Evans
64f315c649
Move properties panel to widgets with the other AUI panels
2022-11-27 22:40:23 -05:00
Jeff Young
ec9c6a8053
Separate creation of polygons for open and closed shapes.
...
This allows us to create a bounding hull from an open shape-line-chain,
which is useful for defining milled slots.
2022-11-27 18:29:41 +00:00
Jon Evans
8c7691fbc3
Harmonize on "Manager" for now, since we use that in the docs
2022-11-25 09:13:23 -05:00
Jon Evans
bbea5b3fbc
Save and restore properties and search panel sizes
2022-11-25 09:11:30 -05:00
Seth Hillbrand
47d86e5d9e
Don't crash when canceling graphics import
...
Grouped graphics need to have their group removed from the preview
before deleting the elements to avoid reading freed memory when
redrawing
2022-11-23 16:21:06 -08:00
Jeff Young
8b1ffca7fa
Better reporting of nets and netclasses.
2022-11-22 14:54:08 +00:00
Jeff Young
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
Jeff Young
226529235c
Mostly const safety, but also performance opt. by avoiding shared_ptr overhead.
2022-11-22 12:21:30 +00:00
Seth Hillbrand
3b31955d98
Get hit test in group members
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12957
2022-11-21 09:28:49 -08:00
Seth Hillbrand
01138a2e19
Fix fillet action for lines
...
Generalize fillet action behavior to all straight lines in pcbnew
Fixes https://gitlab.com/kicad/code/kicad/issues/4742
2022-11-21 07:01:14 -08:00
Jeff Young
c1510f07d8
Fix some issues with group bounding boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
Jeff Young
0120df014e
Give group the right parent when pasting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12954
2022-11-20 22:52:06 +00:00
Alex
12a55f20d3
Fix a mistake in grip margin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12952
2022-11-21 00:25:19 +05:00
Alex
dd2f19ca5f
Allow router cursor snapping to points on the arc.
...
Also don't disable grid snapping when holding Shift over arcs.
2022-11-20 16:56:25 +05:00
Alex
110bc6abd1
Fix router cursor glitching on H/V track segments.
...
Also don't disable grid snapping when holding Shift over tracks.
2022-11-20 16:56:25 +05:00
Alex
38fd1c9985
pcbnew: Improve performance when something is selected.
2022-11-19 01:53:30 +05:00
Jeff Young
c409646aad
Update message panel after rebuilding connectivity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10122
2022-11-18 15:29:16 +00:00
Jeff Young
bba6d503d4
Don't keep value of user or grid anchors between invocations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12065
2022-11-17 00:51:52 +00:00
Jeff Young
cefc5268ab
Allow pads in selection and filter them for free-pads later.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12912
2022-11-16 18:37:40 +00:00
Jeff Young
9724f6e736
Don't allow zone filling during other editing operations.
...
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.
Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
jean-pierre charras
f51db4e093
Fix some Coverity and compil warnings.
2022-11-14 09:02:40 +01:00
Jeff Young
9d8fdd8d53
Fire selection events from SelectAll().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12896
2022-11-13 22:59:21 +00:00
Jeff Young
7089e99f4b
Integrate move individually into move algo so other commands don't choke.
...
Also adds commands to cancel and finish move individually.
Fixes https://gitlab.com/kicad/code/kicad/issues/12750
Fixes https://gitlab.com/kicad/code/kicad/issues/12749
2022-11-13 13:18:42 +00:00
jean-pierre charras
248181e62d
Fix Coverity and compil warnings.
2022-11-12 16:02:24 +01:00
Jeff Young
d9987e9569
Orig_items will have been invalidated by Revert.
...
Don't use it to rebuild the selection. Use the board_item flags instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/12882
2022-11-11 22:57:38 +00:00
Jeff Young
138f835672
Retire group bbox cache.
...
It's too hard to maintain when changes to other items (the groups
members) affect it.
2022-11-11 20:31:31 +00:00
Jeff Young
3fc727bb91
Clear selection before deleting objects during conversion.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12879
2022-11-11 17:53:01 +00:00
Jeff Young
03ba14c6d3
Tighten lifecycle management of parent group pointers.
...
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
Alex
0b4fc8f50d
Fix bugs in PCB arc editing.
2022-11-11 15:00:36 +05:00
Alex
46d4861187
Use the 45-degree limit button to apply alternative constraint.
2022-11-11 15:00:36 +05:00
Alex
8b0f3f1ee7
Set keeping the center as the default arc editing mode.
2022-11-11 15:00:36 +05:00
Jeff Young
3f63f9fc57
Don't prune inner layers of through-hole parts.
...
For historical reasons we've always included ALL inner layers in these
items and changing that has uncovered several latent bugs. Rather
than find all the rest this late in the game, I went back to storing
all inner layers, even those the board doesn't currently have.
Fixes https://gitlab.com/kicad/code/kicad/issues/12863
2022-11-09 15:58:14 +00:00
Jeff Young
4066850f37
Use event point to determine if we're still in draggable item.
2022-11-09 13:09:01 +00:00
Seth Hillbrand
056f45cd70
Fixup most intersecting polygon points
...
Remaining is the intersecting complex pad, so this keeps the error
message when drawing
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-08 16:05:04 -08:00
Jeff Young
2cfe78170c
Honour selection filter when picking move anchors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12773
2022-11-08 16:27:18 +00:00
jean-pierre charras
cb3d215b6a
Fix compil and Coverity warnings.
2022-11-08 11:53:13 +01:00
Jeff Young
be8bbcaac3
Send Selected event even if the result is an empty selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12849
2022-11-07 19:47:51 +00:00
Jeff Young
b5f62da5d9
Respect synthetic layer visibility when selecting footprint texts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12850
2022-11-07 19:26:14 +00:00
Jeff Young
ae741b93e6
Resore push/pop-less PickerTool.
...
(Functionality was accidentallly lost when we removed the opt command
strings.)
2022-11-07 19:11:12 +00:00
dsa-t
0b3ecdd968
Revert "Fix handling of self-intersecting polygons"
...
This reverts commit ed309e20da
2022-11-07 09:41:56 +00:00
Jon Evans
dd94b2d3a7
Rename PROPERTIES to STRING_UTF8_MAP for clarity
...
This class has nothing to do with the properties system
2022-11-06 11:51:52 -05:00
Jeff Young
bb618f2d55
Update pointEditor after cancelled move.
2022-11-05 16:50:54 +00:00
Seth Hillbrand
8bc9d456c3
Fix area selection calculation
...
area was a double value for comparison of large numbers. But the
promotion from int happened after the multiplication (and overflow) for
large images
Fixes https://gitlab.com/kicad/code/kicad/issues/12821
2022-11-03 11:46:40 -07:00
Seth Hillbrand
ed309e20da
Fix handling of self-intersecting polygons
...
We allow temporary self-intersection but before committing, we reduce
the polygon to a single outline (optionally with holes)
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-01 13:09:11 -07:00
Seth Hillbrand
c7c4439027
Allow bezier->line/poly conversion
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12778
2022-10-31 12:48:53 -07:00
Jeff Young
3b3e6de515
Disable mirror commands when a single footprint is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12752
2022-10-28 19:20:24 +01:00
Wayne Stambaugh
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
Jon Evans
960c92634f
Improve logic of Position Relative tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12672
(cherry picked from commit 2d2912c23d
)
2022-10-24 18:47:38 -04:00
Jeff Young
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
Jeff Young
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
Jeff Young
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
Jeff Young
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
Wayne Stambaugh
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
Jeff Young
46752499df
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
2022-10-17 13:21:07 +01:00
Jeff Young
e9f8454a67
No DRC engine in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-16 18:39:37 +01:00
Jeff Young
4af98827fd
Revert change for 11299, and update removed-pad items after zone fills.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
Seth Hillbrand
697056fa7e
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
2022-10-14 16:15:06 -07:00
Jeff Young
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
Jeff Young
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
Jeff Young
8f1b4a9c03
Include cleanup.
2022-10-13 23:15:41 +01:00
Jeff Young
8b9cbd5805
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
2022-10-13 00:07:30 +01:00
jean-pierre charras
d0d625dcb5
BOARD_INSPECTION_TOOL::LocalRatsnestTool(): set a suitable cursor when activated.
2022-10-12 15:56:41 +02:00
Jeff Young
83310659fd
Basic geometry: R != D.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 19:18:37 +01:00
Jeff Young
8470b178cd
Use actual pad shapes or built outline instead of effective shpaes for anchors.
...
The effective shapes don't work very well in the custom pad or rounded
rectangle cases, and they're somewhat slower in some of the other cases.
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 18:11:32 +01:00
Jeff Young
79dabdd484
Fix typo.
2022-10-07 23:52:47 +01:00
Jeff Young
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
Alex
165654f114
Expose Switch Arc Posture in context menu.
2022-10-07 08:28:13 +03:00
Alex
d26b59a0bf
Improve arc construction using angles from arc geometry manager.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11713
2022-10-07 06:51:00 +03:00
Alex
22917860ef
Move Enter Group for easier access.
2022-10-07 03:03:33 +03:00
aris-kimi
f818f3a445
Fix footprint rule and zone area anchors
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12575
2022-10-06 15:29:18 +00:00
Jeff Young
436d75e7f9
Try to reconcile SELECTION and BRIGHTENED use of overlay.
...
For some reason the overlay doesn't get redrawn during the PCBNew
selection disambiguation menu, so we need to not hide BRIGHTENED
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/12547
2022-10-04 17:01:56 +01:00
Jeff Young
524a43f95e
Don't select footprints on the wrong side if not visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12483
2022-10-04 13:22:06 +01:00
Jeff Young
ba630971af
Possible fix for move/esc/esc crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12553
2022-09-30 23:05:55 +01:00
Jeff Young
6a6ef9b1f4
Bring adding-to-group and hiding in sync.
2022-09-30 16:45:00 +01:00
Mike Williams
c1da59b560
Swap: disallow swapping tracks / wires
...
Also fix missed shortcut change for S -> Shift-S
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12538
2022-09-29 17:04:43 -04:00
Jeff Young
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
Seth Hillbrand
9894acea76
Spelling
2022-09-28 17:09:43 -07:00
Alex
4095172259
ADDED: Pack and Move Footprints, improved footprint spread algorithm.
2022-09-28 13:37:23 +00:00
Jeff Young
3a7068b346
Iterate on a copy of the selection since we're going to delete from it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12484
2022-09-27 23:54:19 +01:00
Mike Williams
700edb95e3
PCB Actions: Grab Unconnected
...
Grabs the nearest unconnected item for each selected footprint/pad.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1986
2022-09-26 16:17:41 -04:00
Mike Williams
f4a3062684
PCB: Select Unconnected
...
Selects the all unconnected items for each selected routable item.
2022-09-26 16:17:41 -04:00
Mike Williams
e66393c4dd
PCB Tools: Move Individually
...
Allows moving a selection of components one by one.
2022-09-26 16:17:41 -04:00
Marek Roszko
2490ad1458
Fix search panel not remembering visibility
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12494
2022-09-25 11:56:41 -04:00
Marek Roszko
59d62f7df1
Untangle some includes
2022-09-25 11:37:06 -04:00
Jeff Young
7e71dc084c
Implement Mirror H/V for tracks and vias.
...
While not that often useful, it's really annoying that it doesn't work
when you *do* find a use-case for it.
Fixes https://gitlab.com/kicad/code/kicad/issues/6853
2022-09-24 19:55:48 +01:00
Jeff Young
328cc27020
Add pad-recombining to FPEditor's Cleanup Graphics.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12487
2022-09-24 19:34:06 +01:00
jean-pierre charras
28f836ab5c
Fix overzealous string replacement
2022-09-23 10:56:58 +02:00
Jeff Young
897135a4f0
Support mirroring on the board too.
...
Also fixes a few bugs in FP item mirroring.
Fixes https://gitlab.com/kicad/code/kicad/issues/2168
2022-09-22 15:05:58 +01:00
Jeff Young
8eb68ee472
Add pin/unpin context menu to Symbol Chooser and Footprint Chooser.
...
Also moves some more code down into common so it can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12384
2022-09-21 14:45:12 +01:00
Jeff Young
513fc872bb
Support both X and Y mirroring in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12409
2022-09-21 00:16:27 +01:00
Seth Hillbrand
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
Jeff Young
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
jean-pierre charras
5990595619
When adding a bitmap, do not clone it during moving.
...
Cloning is not necessary, and is memory consuming.
2022-09-19 17:41:47 +02:00
Mike Williams
ca0c9f12e0
PCB Editor: Unroute Footprint
...
Also works on selected pads.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1955
2022-09-19 10:37:10 -04:00
Mike Williams
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
Jeff Young
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
Jeff Young
1566bd8b14
Make sure a collector has a guide before handing it to a client filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12460
2022-09-18 18:14:47 +01:00
Marek Roszko
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
Marek Roszko
66e8931405
Remove IU_PER_MM thats standalone
2022-09-16 21:09:27 -04:00
Marek Roszko
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
Marek Roszko
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
Jeff Young
107f409106
Use router's connectivity algorithm, not CONNECTIVITY_DATA's.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-16 22:49:20 +01:00
Jeff Young
d9f75556bd
Fix old copy/paste error (from 2017, believe it or not).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11487
2022-09-16 11:25:27 +01:00
Mark Roszko
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
Jeff Young
ce9adeaf51
Don't set FreeVia when we can't find a net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12421
2022-09-15 23:16:08 +01:00
lulu731
0180bcf90a
ADDED: Implement Drag and Drop
...
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
2022-09-14 22:28:09 +00:00
Jeff Young
2d3b8d6393
Fix logic around Select All inside an entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12411
2022-09-14 12:24:51 +01:00
Jeff Young
281b9d405a
ADDED ability to specify where pad number (& net name) go on custom shaped pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6627
2022-09-14 11:37:20 +01:00
Jeff Young
f91487aa36
Don't overwrite titleblock and pageinfo when appending board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11650
2022-09-14 11:37:20 +01:00
Mark Roszko
f304e2d4f6
ADDED: Search/inspect pane
2022-09-14 02:59:57 +00:00
Mike Williams
1a023f5dd0
PCB Editor: (Auto)Route Selected (From Other End)
...
3x Selection-Based Routing Tools. Takes a selection of routable objects
and routes them one at a time individually, with an attempted finish, or
from the other end, depending on the action given.
2022-09-13 15:06:36 +00:00
Jeff Young
0a5ca5b485
Display crosshairs in picker tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10183
2022-09-13 01:40:43 +01:00