bba5cfe17e
fix a minor compil warning
2020-07-01 18:52:42 +02:00
8c4bfed001
Slight improvement on function names.
2020-07-01 16:57:00 +01:00
7b042f4a75
Add rectangle tool to PCBNew toolbar in favour of Aux Origin.
...
ADDED new rectangle graphics tool for PCBNew and Footprint Editor.
Also adds rectangle tool to both Footprint Editor and PCBNew Place
menus.
The Aux Origin tool can come back once we have multi-select toobar
buttons.
Also collapses an unnecessary level out of the auxOrigin and gridOrigin
settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/2246
2020-07-01 13:31:30 +01:00
e91b7cf18f
Separate the two offset strategies for PointEditor Pad editing.
...
This doesn't indicate what I think we should do with them; it will
just make whatever we decide easier to do.
2020-06-29 23:25:13 +01:00
36e94773a3
Adjustments to point-editing of pads.
...
1) Don't offset pad with no hole and no offset: move them instead.
2) Don't allow editing of locked pads in board editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/2153
2020-06-29 19:22:38 +01:00
516de9c85e
Point editor hookup for non-custom-shaped pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2153
2020-06-29 11:50:44 +01:00
65f5ebd8f2
ADDED: Persistent selection filter UI for PcbNew
2020-06-28 15:12:47 +00:00
0d4ee39f75
CHANGED: Copper zones can be on more than one layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
367fd79b5f
Don't try and second-guess the user.
...
(Especially now that polygons are useful on copper layers for custom
pad shapes.)
2020-06-27 22:08:13 +01:00
32c3ea4edd
Flags cleanup.
...
Remove extraneous use of FLAG0 from tracks cleaner (it was checked but
never set).
Fix issue in expand connections where two parts of it couldn't agree
on the same flag (BUSY vs SKIP_STRUCT), and where the second part was
clearing the flag instead of setting it.
Remove obsolete HIGHLIGHT infrastructure (we now use selection).
Remove extraneous use of BUSY flag in several places (it was never
set).
2020-06-27 17:53:04 +01:00
da2b7071b4
WYSISYG custom pad editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2153
Fixes https://gitlab.com/kicad/code/kicad/issues/2305
2020-06-27 14:37:01 +01:00
129c16cf7d
Fix unselected event not firing when clicking empty space
2020-06-26 22:00:12 -04:00
19b7755ab7
Coverted Gerbview files to version in master so hotkey_rollover repo only contains changes for the hotkey fix
2020-06-25 22:43:29 +00:00
a893d19d26
pcbnew: Allow slow ratsnest to turn off
...
Depending on where you move the selection, the slow ratsnest might turn
on. This prevents that setting from being sticky, reverting to smooth
movement.
2020-06-24 17:16:07 -07:00
e376750f62
Flatten CS_PAD_PRIMITIVE out in favour of reusing DRAWSEGMENT.
...
(In prep for the eventual replacement of DRAWSEGMENT internals with
SHAPE.)
2020-06-24 12:22:42 +01:00
1a7c270dcd
Fix invalid dereference on first highlight
...
When highlighting nets we don't save the previous net when there isn't a
previous net highlighted.
2020-06-23 20:36:05 -07:00
2ab9ceaf02
Pick up net for new zone from selection if no net is highlighted
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4706
2020-06-23 17:16:34 -04:00
d01b29ab37
Cleanup pad geometry handling.
...
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
c0175c48af
ADDED: Setting to control track mouse drag behavior
...
Default is now to perform a 45-degree drag
2020-06-21 15:39:39 -04:00
713cd4a47a
Point editor: show dragged points with a highlight
...
Take points editor colors from color theme
Also fix an issue where the edited object sometimes didn't
update when a point is dragged.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4600
2020-06-21 14:43:41 -04:00
a16c9df79c
Delete the right object in arc cleanup
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4694
2020-06-21 13:03:14 -04:00
ad69e449fe
Fix a collision name in drawing_tool.h with a msys2 header
2020-06-21 10:36:01 +02:00
b779715996
Don't whack original pad shape when converting to custom.
...
Rectangles and circles convert easily, but a chamfered rectangle
(for instance) needs more careful handling.
2020-06-19 14:10:41 +01:00
cae493fe65
More infrastructure work for shape editor.
2020-06-18 15:38:01 +01:00
eb89d1c68b
pcbnew: Minor update to ratsnest calc
...
BuildConnectivity updates the ratsnest after it completes. By compiling
the ratsnest before connectivity, we update it twice with the dirty flag
being reset after connectivity updates.
2020-06-17 19:43:11 -07:00
a7703d1207
Cleanup Graphics to parallel Cleanup Tracks & Vias.
...
This also allows for easier migration to DRAWSEGMENT::S_RECTs by
auto-converting 4 rectilinear lines to a rectangle.
2020-06-17 18:44:39 +01:00
a3cab09fb4
Make it clearer that drawSegment() can modifiy the current seg pointer.
...
This might also quiet the Coverity warning, but I've also marked it as a
false positive (as it might still mess up on the new code).
2020-06-17 18:44:39 +01:00
8c57821e9b
pcbnew: Move ratsnest items to separate folder
2020-06-16 11:15:14 -07:00
aeed8e6e2c
Finish implementation of DRAWSEGMENT::C_RECT.
...
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
2020-06-15 20:51:31 +01:00
2a334a5c59
Updates wording used in alignment submenu to make the actions clearer when icons are missing. Also reorganises the order of items in the submenu.
2020-06-15 16:49:36 +00:00
ad12c42e8b
Push grid settings dialogs down into common.
...
This also gives support for fast grid switching and a user grid
to eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/2200
2020-06-14 19:26:37 +01:00
899496baaa
pcbnew: Remove item from edit selection in favor of parent
2020-06-14 07:29:44 -07:00
491ac0256d
pcbnew: Add a number of missing handles for module zones
2020-06-14 07:23:10 -07:00
09eee84a3e
pcbnew: Handle module zone area in delete
...
Selections containing zone areas need to be handled separately by
modifying the parent rather than the item itself
Fixes https://gitlab.com/kicad/code/kicad/issues/4653
2020-06-14 07:05:14 -07:00
47ab7c78a6
Divorce GRID_HELPER from the parent frame.
...
This moves GRID_HELPER fully into the tool framework.
2020-06-13 22:44:16 +01:00
4d4d24fc61
Don't snap to arc midpoints
...
This removes the extra snap points in the arcs, ensuring the endpoint
snaps connect to the correct location on an arc.
2020-06-13 11:23:14 -07:00
f84406009b
Push a couple of layers of indirection out of grid settings.
2020-06-13 11:35:56 +01:00
a843c74529
Add new kiplatform library for platform-specific code
...
* Implement ReparentQuasiModal for OSX natively
* Implement ForceFocus of OSX natively
This change means we no longer rely on the kicad-specific functions in our osx wx fork.
2020-06-03 14:58:54 +00:00
e3c3dae776
Fix PCBnew crash when show local ratsnest and selecting a footprint with no pads
...
Fixes #4506
https://gitlab.com/kicad/code/kicad/issues/4506
2020-06-01 09:09:40 +02:00
5250215d97
Use the calculated bbox for zoomFitSelection
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4120
2020-05-29 16:38:25 -04:00
d99febba6c
Treat sketch mode module items and board items the same.
2020-05-26 23:21:38 +01:00
160981ee71
Better error reporting for DRC rule parsing.
2020-05-25 22:51:47 +01:00
ecec7192fc
Add "Select All" in schematic & layout disambiguation popup menu
...
ADDED: "Select All" in schematic editor disambiguation menu
ADDED: "Select All" in layout edtor disambiguation menu
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3877
2020-05-24 23:35:04 +00:00
e18a9d4aa3
Fix mac compile issue introduced in 66929358
2020-05-24 23:53:55 +01:00
c7daf8a8f3
ADDED: Cross-probe highlighting of bus members
...
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
2020-05-24 13:30:23 -04:00
4ecf99e7c8
Give the footprint viewer a toolbar and remove the options dialog
...
CHANGED: Cvpcb fpviewer and the pcbnew fpviewer no longer have an options dialog
ADDED: Add a side toolbar to the pcbnew footprint viewer (and the measure tool)
This also cleans up some of the settings structs in the viewers, since
it was somewhat confusing before.
Fixes https://gitlab.com/kicad/code/kicad/issues/2205
2020-05-24 11:58:33 +01:00
6692935808
Consolidate common viewer actions across cvpcb and pcbnew frames
...
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
2020-05-24 11:58:33 +01:00
f2e003147e
ADDED: Enable color themes for PcbNew printing
2020-05-16 13:19:43 -04:00
1d914133c9
Pcbnew, context menu: move createArray,moveExact,positionRelative in a submenu
2020-05-16 16:09:00 +02:00
c805b52c39
Tool pad enumerate: show it only in footprint editor.
...
In board editor, its use makes no sense, and crash Pcbnew.
2020-05-16 15:52:47 +02:00
935cab160b
A bit of defensive code for an unreproducible bug.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4376
2020-05-09 14:14:38 +01:00
19dc1f8b69
Make sure text gets drawn after placing even if the mouse isn't moved.
2020-05-09 14:14:38 +01:00
8418ac34bc
Allow fp text to be group selected in HC mode
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2259
2020-05-07 21:57:37 +00:00
889b6cb1b1
Clean up some commenting and rename MODULE_EDITOR_TOOLs to match filename.
2020-05-03 20:56:32 +01:00
56946f4db1
Fix pad name increment to use last edited pad.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1882
2020-05-03 08:59:51 +01:00
199bb2ffb0
Add hittesting for worksheets in Pcbnew and Eeschema.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4282
2020-05-03 00:07:38 +01:00
fec0c235d9
Hook up Footprint Text Line Mode action to handler.
2020-04-27 00:24:57 +01:00
e05f36f9a7
Convert graphic polygons on CrtYd layers to lines
...
Same restriction as Edge_Cuts, due to their intended purpose polygons
don't make sense.
2020-04-26 18:51:47 +00:00
99dcadf7e6
Introduce new KI_FALLTHROUGH macro
...
Annotate purposeful fallthroughs in switch statements with the
KI_FALLTHROUGH macro.
2020-04-25 00:44:09 +01:00
f649204c04
Allow graphic polygons/keepouts to be closed automatically
...
ADDED: Auto close option for graphic polygons/keepouts/cutouts
ADDED: Delete last point option for graphic polygons/keepouts/cutouts
Fixes https://gitlab.com/kicad/code/kicad/issues/2350
2020-04-24 18:35:43 +01:00
1535c83b88
Lay some groundwork for adding distances to DRC errors.
...
modified: eeschema/lib_rectangle.cpp
2020-04-24 14:46:22 +01:00
825d202480
Fix some strings to help translation.
...
Remove translation mark for strings used in debug, or strings
that cannot be translated (for instance because they are char strings
instead of wide char strings)
2020-04-23 07:40:19 +02:00
b22ff26688
Rename List Nets to Net Inspector to better reflect function
2020-04-21 20:24:27 -04:00
f113370e1e
Edit worksheet properties when no other selection is available.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4044
2020-04-21 21:17:59 +01:00
80e40b862c
destroy window when list nets dialog is closed
...
avoid potential performance issues when the dialog is still listening to
the board updates and refreshing its data and view structures.
it seems useful to keep the settings of the dialog across dialog
open-close cycles.
2020-04-21 13:23:56 +00:00
980f4a1f6a
make select net dialog non-modal
...
also make sure to call BOARD::HighLightON before/after calling
BOARD::SetHighLightNet
2020-04-21 13:23:56 +00:00
137fe48d88
rewrite select net dialog
2020-04-21 13:23:56 +00:00
e3aec20f82
move PCB_INSPECTION_TOOL::ListNets into pcb_inspection_tool.cpp, split out dialog_select_net_from_list.h
2020-04-21 13:23:56 +00:00
7db355e34a
ADDED: TOOL_ACTION for switching PNS router mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2249
2020-04-19 22:44:05 +00:00
cb708aaadb
Fix some memory leaks.
2020-04-16 21:57:07 +01:00
9c8941e040
Remove a bunch of globals.
2020-04-16 17:34:46 +01:00
5aac36dba9
New enum for trace selection mode
...
This avoids giving KICAD_T another meaning, which is especially messy here
as "select up to the next via" is encoded as SCH_JUNCTION_T, which belongs
to eeschema.
Also, document what is happening.
2020-04-15 11:17:51 +00:00
37a4dd927b
Allow deletion of zone cutout areas
...
ADDED: Ability to delete zone cutout areas
Fixes https://gitlab.com/kicad/code/kicad/issues/4188
2020-04-14 17:57:47 +01:00
6e800bddae
Rationalize penWidth processing as first step in removing some globals.
2020-04-13 20:58:13 +01:00
e016b629d3
Be smarter about determining if there are modules in the selection list.
...
The old algorithm would delete modules if another module was in the
list, which was not the intention.
Fixes https://gitlab.com/kicad/code/kicad/issues/4175
2020-04-09 00:06:17 +01:00
25fb2595c8
Fix fully broken selection of items of the same sheet, in pcbnew and from eeschema.
...
Previously, the full UUID path used to select footprints was full broken.
2020-04-02 14:21:09 +02:00
0d79ada3ec
Show the pencil cursor when placing an item, but it isn't created yet
2020-04-01 18:24:58 +01:00
4b647ba6b1
Refactor microwave parts into the microwave tool
2020-04-01 18:24:31 +01:00
4990d1e7b2
Variable substitution framework.
...
This implements editing of variables and moving SCH_FIELDs,
TEXTE_MODULEs, TEXTE_PCB and worksheet items over to the new
framework.
2020-03-30 14:15:59 +01:00
204f2cd580
Reference -> reference designator.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4012
2020-03-17 16:09:25 +00:00
3b97993daf
Another attempt to fix offset issues when pasting board items to ModEdit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4032
2020-03-16 18:45:55 +00:00
78a7c7dfe0
Zones: fix a crash when adding a zone cutout to a zone having already holes.
...
Fixes #4039
https://gitlab.com/kicad/code/kicad/issues/4039
2020-03-12 14:42:32 +01:00
51b9944667
Fix pasting of items from board to Footprint Editor.
...
In particular, map the netlist info to the orphaned item, and
adjust the position of module graphic items to no longer be
module-relative.
Fixes https://gitlab.com/kicad/code/kicad/issues/4032
2020-03-10 23:07:01 +00:00
12088f240d
Fix a couple crashes with small canvases
...
The canvas size is not guaranteed to be strictly > 0, so we need to
enforce a minimum returned size before dividing by it or passing to GAL
initialization
2020-03-04 14:33:42 -06:00
85c2e0d23a
Add user-defined severities, exclusions and colors to DRC markers.
...
Exclusions are currently persisted in the project file.
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-04 00:39:28 +00:00
a8dea9274f
modify behavior of position relative tool
...
CHANGED: The reset buttons now set the X or Y offset to the current
offset from the reference position. Selecting individual pads as the reference item is now also possible.
2020-03-02 20:55:06 +00:00
4525a17076
router: backspace key to undo last fixed segment(s)
2020-02-27 22:02:56 +01:00
cdad62022b
Bug fix for double-click in DRC dialog.
...
Also better clean-up of highlighting in board editor window.
2020-02-25 12:18:24 +00:00
8c19b4b6ae
pcbnew: Adding arcs to PNS
...
This is allows ARCs in tracks to be synchronized with
the PNS router. Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
ea025a35e5
Change KUUID to KIID.
2020-02-21 22:20:42 +00:00
e8e3b4f11e
Rename UUID to KUUID to fix MSVC build
...
Also add another newly-required boost flag
2020-02-20 22:07:17 -05:00
129042f8a6
Convert timestamps to UUIDs.
2020-02-20 21:29:52 +00:00
e59a3d981e
Implement a new settings framework across all of KiCad
...
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
625249322e
Pcbnew: regroup drc files to the already existing drc folder.
2020-02-19 10:31:32 +01:00
2017389f2d
Pinning for library trees in FPEditor and SymbolEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2288
2020-02-14 00:10:40 +00:00
8b7d4c2a55
Put tool graphics back on the stack
...
Now that the tool framework gracefully shutdowns the tools, graphics
can be created on the stack inside a tool function.
This reverts commit f6881ce3de
2020-02-05 22:23:44 +00:00
b1240b5b1e
Gracefully shutdown tools when frames are closed
...
If the tools are not gracefully exited, then the stack variables are
never destroyed, so variable lifetime issues can occur.
Fixes https://gitlab.com/kicad/code/kicad/issues/1753
2020-02-05 22:23:24 +00:00
d8cd48aa7f
Allow duplication of module texts from board editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3829
2020-02-05 22:21:16 +00:00
34e5b76c5f
Add virtual constructors to some classes that should have them
...
This is more for safety from undefined deletion behavior than
anything else (it also silences the Clang -Wnon-virtual-dtor warning).
2020-02-05 22:19:14 +00:00
e94f356ad5
pcbnew: Correct stop condition for expand
...
Typo in selection tool caused expansion past vias.
2020-02-05 14:14:50 -06:00
fbeb0709ef
Formatting cleanup.
2020-02-03 19:35:48 +00:00
f1b1c91961
Be a little more friendly towards SMD footprints.
...
Increase the coverage ratio a bit so that footprints that still
have 10% of their area available for selection won't bring up the
disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/3721
2020-02-03 19:35:48 +00:00
d02c0da3ab
Remove preferred layer disambiguation for multiple modules.
...
The preferred list isn't actually in use anymore at this point, so
it currently has no effect other than to mess things up since we
aren't keeping track of which modules have been rejected when we
check the module count.
Fixes https://gitlab.com/kicad/code/kicad/issues/3721
2020-02-03 19:35:48 +00:00
89dfee9ebe
Employ an accuracy when hittesting (particularly for lines).
...
Also fixes a bug where the parent module was being hit-tested
for its children.
Fixes https://gitlab.com/kicad/code/kicad/issues/3750
2020-02-03 15:08:01 +00:00
fd0728becf
Fix an other crash similar to f6881ce3.
2020-01-31 16:41:47 +01:00
f6881ce3de
Fix crash after calling EDIT_TOOL::pickCopyReferencePoint()
...
An instance of STATUS_TEXT_POPUP was created on the stack.
But it crashes pcbnew when closing the current main frame,
perhaps due to stack switching in coroutines.
It is now created on the heap.
2020-01-31 16:08:18 +01:00
3d0b3a51f3
Eeschema: Adding back annotation
...
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
2020-01-29 16:33:57 +00:00
48ae188b15
Zone filler: fix a few issues, in Smoothed Polygons mode.
...
- Fix non optimal shape of solid polygons after inflate transform.
- Add a small extra clearance ((2 microns) when creating clearance areas
(especially, convert arc to polygons create small differences)
- Add a small threshold (1 micron) in drc test distances to avoid false positives
- fix a minor issue in TransformOvalToPolygon that created sometimes a not perfect shape
Fixes #3812
https://gitlab.com/kicad/code/kicad/issues/3812
2020-01-26 18:19:24 +01:00
d12e8479f2
Pcbnew: fix crash when trying to select the previous copper layer.
...
The function that calculates the previous layer id was using a illegal value
in some cases.
Fixes #3805
https://gitlab.com/kicad/code/kicad/issues/3805
2020-01-24 10:13:18 +01:00
7c296fbcb7
GRID_HELPER: Provide alignment axes from snap points
...
ADDED: alignment lines from item snap points
Alignment lines are shown when moving the cursor horizontally or
vertically from a possible snap point.
2020-01-18 20:43:40 -08:00
9df2cfb328
More uninitialized variables.
2020-01-13 20:16:40 +00:00
91d1508c16
Fix some Coverity identified issues.
2020-01-13 20:16:40 +00:00
34bc0a4e96
pcbnew_control: Replace C casts with C++ casting
2020-01-13 14:19:44 +00:00
e2853862e5
Cleanup redundant type casting
2020-01-13 14:00:45 +00:00
8fc434be19
Formatting change for dynamic cast tests
2020-01-13 01:48:57 +00:00
94f8aafec5
Fix missing variable initialization.
2020-01-13 00:18:49 +00:00
8d0f31f6f4
Clean a bunch of legacy code out of the Filter Selection dialog.
2020-01-12 20:53:56 +00:00
127c66285b
Rename old DIALOG_BLOCK_OPTIONS to DIALOG_FILTER_SELECTION....
...
... which is what it has done for some time now.
2020-01-12 20:30:58 +00:00
7c28c3838a
Comment-only changes
...
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
e03281a9ae
Allow exclusive-or selections on OSX.
2020-01-10 22:32:49 +00:00
16026e75cf
pcbnew: Don't compare across containers
...
std:: defines cross-container comparison as invalid and is not
guaranteed to work. This breaks the comparison out into separate
steps, each for the separate containers.
2020-01-07 16:03:32 -08:00
13b6028e1b
Refactor all math into a new kimath library
...
* Split up the thirdparty code into the thirdparty folder (#3637 )
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906 .
2020-01-07 17:12:59 +00:00
5d46e721e5
pcbnew: Cleanup includes of pcbnew_id.h
...
* Remove unused IDs from the enum
* Remove the include statements from files that no longer need it
2020-01-03 15:39:05 +00:00
496f3d49e4
pcbnew: When using '+' and '-' hotkeys, skip non-visible layers
...
CHANGED: pcbnew: When using '+' and '-' hotkeys, skip non-visible layers
Fixes https://gitlab.com/kicad/code/kicad/issues/3443
2019-12-29 23:37:25 +00:00
19ceb11ae7
Change more enums over to scoped enums
2019-12-28 00:55:11 +00:00
a12b803af5
Add missing option to show footprint texts in fill or sketch (line) mode.
...
This option is settable in stable version, but not in master.
So, this option set from the stable version could be modified in master version.
2019-12-23 18:11:45 +01:00
11ff16be4e
Switch to scoped enums
2019-12-20 14:11:39 +00:00
cc185e4b8a
Pcbnew: fix crash when deleting pads in the board editor
...
Fixes # |3684 https://gitlab.com/kicad/code/kicad/issues/3684
2019-12-17 13:56:17 +01:00
6bc8005d60
Pcbnew: fix strange behavior when editing board setup, if a zone is currently selected.
...
The zone was silently deleted.
Fixes #3673 | https://gitlab.com/kicad/code/kicad/issues/3673
2019-12-16 12:44:53 +01:00
d40019210f
Allow undo during a drag.
2019-12-15 21:33:58 +00:00
1f07505b27
Fix long-standing issue with arrow keys moving in both axes.
2019-12-15 14:29:47 +00:00
d14950c3f8
Pcbnew: Add missing options to show graphics in fill or sketch mode.
...
These options where settable in stable version, but not in master.
So, the options set from the stable version cannot be modified in master version.
2019-12-15 13:56:26 +01:00
c4d853c1e8
SHAPE_LINE_CHAIN: Remove element access
...
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
2019-12-12 13:54:48 +00:00
6983c56cf8
Use const references where possible
...
This avoids copy cost on local vars where we only read.
2019-12-05 14:40:22 -08:00
a2edf9c442
Unified update to C++14 std::make_unique
...
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
2019-12-05 10:43:55 -08:00
a9da0c6ecf
Update local coords when editing EDGE_MODULEs.
...
Fixes: lp:1853726
* https://bugs.launchpad.net/kicad/+bug/1853726
2019-12-02 20:01:44 +00:00
c186e7d391
Cosmetic and usability enhancements.
...
- Better menu texts
- do not show pad edit options in board editor,
when they are used only in the footprint editor.
2019-11-26 19:53:00 +01:00
c34dfc4230
fix a minor compil warning
2019-11-23 18:36:40 +01:00
13df645af9
Fold down select/expand connection/copper to a single action.
...
Fixes: lp:1832902
* https://bugs.launchpad.net/kicad/+bug/1832902
2019-11-22 19:30:36 +00:00
523de87b45
Re-implement copper selection algorithms.
...
Fixes: lp:1832902
* https://bugs.launchpad.net/kicad/+bug/1832902
2019-11-22 19:30:36 +00:00
6f2cbe5982
Pcbnew: housekeeping: move netlist code to netlist_reader sub directory.
2019-11-17 13:58:38 +01:00
490bc2874f
Clean up board commit a bit.
...
This change makes it so that we don't run the event loop inside
the commit. It's not clear this is an issue, but it seems safer
not to.
Fixes: lp:1852589
* https://bugs.launchpad.net/kicad/+bug/1852589
2019-11-16 22:32:52 +00:00
6625d0721e
Implement Get/Set display options
...
The pointer passing for display options is deprecated. This removes the
excess casting as the EDA_FRAME didn't need the base call with no value.
All requests for display options are now returned const and are updated
with a Set() routine after modification.
In Gerbview, this resolves an issue where the display options were not
stored because it was receiving the NULL from EDA_FRAME.
2019-11-07 08:26:44 -08:00
19c643b29a
pcbnew: Prevent extra selection
...
We want to avoid selecting items that are disabled in the item list.
Our standard method is in the GetViewLOD() that performs both size and
visibility. This extends the check to module text and via.
Fixes: lp:1851133
* https://bugs.launchpad.net/kicad/+bug/1851133
2019-11-05 12:24:29 -08:00
1c153c55c0
Add default units and precision for new dimension objects.
...
Fixes: lp:1846376
* https://bugs.launchpad.net/kicad/+bug/1846376
2019-11-05 17:22:51 +00:00
872826085a
Filter PCBNew contents when pasting into Footprint Editor.
...
Fixes: lp:1850724
* https://bugs.launchpad.net/kicad/+bug/1850724
2019-11-05 17:22:51 +00:00
48c8ac9663
Added new action for "Change Track Width".
...
Default out-of-the-box is no hotkey. Removed all the preference stuff.
Note that the new implementation is a little different: the old one only
operated on a selection with a single item where the new one operates on
all selected items. So if you want the whole track do a 'U' before the 'W'
(or whatever you have Change Track Width assigned to).
Fixes: lp:1844023
* https://bugs.launchpad.net/kicad/+bug/1844023
2019-11-05 17:22:51 +00:00
dc5e8aa609
pcbnew: Performance improvement on moving items
...
This adjusts the fix for 1813038 to focus on the duplicate ghost,
preventing the need to unselect/reselect in every cycle. This improves
large move speeds substantially
2019-11-01 10:00:38 -07:00
868ff5bb2c
Right click gets a new object if the mouse has moved
...
Right click is a pointing operation combined with a request for the
context menu. We need to highlight the user's intended object when they
have moved their mouse to a new element instead of showing the context
menu for the selected object.
However, in cases where the selection is difficult to make, it is
sometimes helpful to select the item first, then right-click. In these
cases, we keep the selection where the mouse remains inside the selected
object's bounding box.
2019-10-29 16:11:06 -07:00
bc5dcf182f
keepout in footprint: fix some crashes and issues. Create a specific type (PCB_MODULE_ZONE_AREA_T) for zones in footprint. The new class (MODULE_ZONE_CONTAINER) is the same as ZONE_CONTAINER, but the type ID is PCB_MODULE_ZONE_AREA_T instead of PCB_ZONE_AREA_T.
...
This is mandatory because these zones must be handled differently in many functions.
2019-10-29 11:24:57 +01:00
64a42ffa35
Add keepout in footprints: Starting point.
2019-10-29 11:24:30 +01:00
39241dc0ff
Footprint browser: Handle frame calls
...
The frame() call requires an edit frame but the browser is derived from
PCB_BASE_FRAME.
Fixes: lp:1849962
* https://bugs.launchpad.net/kicad/+bug/1849962
2019-10-26 08:27:27 -07:00
bae50fab9f
pcbnew: Fix 45° snapping polygons
...
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.
This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
2019-10-24 16:01:14 -07:00
4813eb12e6
DIALOG_POSITION_RELATIVE: fix some issues: wxWidgets alerts and unit selection not taken in account after the first run.
...
Fixes: lp:1849231
https://bugs.launchpad.net/kicad/+bug/1849231
2019-10-22 14:09:11 +02:00
8f1c1cf298
pcbnew: Don't limit editing of the polygons
...
45 deg contraints are not saved per polygon, so don't limit per polygon.
The constraint is only enforced during creation.
Fixes: lp:1847722
* https://bugs.launchpad.net/kicad/+bug/1847722
Fixes: lp:1846029
* https://bugs.launchpad.net/kicad/+bug/1846029
2019-10-20 09:29:42 -07:00
2e1af66a2b
pcbnew: Commit polygon points to new constrained zone
...
Adds leader points if they are not already existing in the zone
Fixes: lp:1846028
* https://bugs.launchpad.net/kicad/+bug/1846028
2019-10-20 09:29:35 -07:00
e73e7bdc23
Process via size inc/dec commands while running via tool.
...
Fixes: lp:1846320
* https://bugs.launchpad.net/kicad/+bug/1846320
2019-10-17 20:17:26 +01:00
0995433601
Map nets (if possible) from clipboard to destination.
...
Fixes: lp:1795057
* https://bugs.launchpad.net/kicad/+bug/1795057
2019-10-17 18:04:07 +01:00
cecfeea947
pcbnew: Remove snapping to hidden items
...
Items and layers that are hidden in the view should not be used as snap
points. This happens in multiple locations:
1) Grid Helper for normal tools
2) TOOL_BASE::snapToItem for router
Resolves KiPro Issue #116
Fixes: lp:1833128
* https://bugs.launchpad.net/kicad/+bug/1833128
2019-10-10 09:37:25 -07:00
0aa5424511
pcbnew: Switch over some drawing tools to use PrimeTool
...
Before, if the tools were activated from the context menu,
they would start drawing where the menu item was selected
instead of where the menu was opened.
2019-10-03 19:04:36 +01:00
b58df5e777
Flip Start0 etc. when in ModEdit.
...
ModEdit and PCBNew use Start0/End0/etc. differently so care must
be taken when flipping.
Fixes: lp:1845402
* https://bugs.launchpad.net/kicad/+bug/1845402
2019-10-01 11:02:52 +01:00
4bf2b6a9f7
Performance enhancements for cross-probing.
...
While found when profiling cross-probing, many of these will also
improve other things.
2019-09-27 19:58:16 +01:00
072ea9a33e
Pcbnew: flip command: when flipping only one item, flip it around its anchor instead of its bounding box.
...
This is the behavior of previous 5.1 version.
Using the bounding box has advantages, but unfortunately in many cases the footprint position is moved.
If a lot of flip commands are made on the same footprint, it is moved far from its initial position.
2019-09-17 10:06:39 +02:00
7dc9beaf11
Add type filter to push pad properties.
...
Fixes: lp:1827820
* https://bugs.launchpad.net/kicad/+bug/1827820
2019-09-08 23:50:36 +01:00
44a1cf9f1b
Implement quiet-mode for selection clearing.
...
Also adds comments for exising quiet-mode calls.
Fixes: lp:1843177
* https://bugs.launchpad.net/kicad/+bug/1843177
2019-09-08 19:45:35 +01:00
10c25a2290
Update frame type enum to match current class names.
2019-09-06 23:38:20 +01:00
6688e80131
Update description in footprint tree when it's edited.
...
Also implements a more useful message panel for Footprint Editor.
Fixes: lp:1842660
* https://bugs.launchpad.net/kicad/+bug/1842660
2019-09-04 17:19:25 +01:00
720de6bae1
Cleanup.
2019-09-03 17:16:27 +01:00
9a6c534e60
Another try at the duplicate-then-move ghosting bug.
...
Fixes: lp:1813038
* https://bugs.launchpad.net/kicad/+bug/1813038
2019-09-03 16:51:00 +01:00
4c9e4c947c
Fix for move-after-duplicate only needs the extra update once.
...
This version will be quite a bit more performant.
Fixes: lp:1813038
* https://bugs.launchpad.net/kicad/+bug/1813038
2019-09-02 20:46:06 +01:00
315a99e0fe
Use Move() instead of SetPosition() so that the second pt gets updated too.
...
Fixes: lp:1841989
* https://bugs.launchpad.net/kicad/+bug/1841989
2019-08-30 23:32:17 +01:00
79d062aefc
Don't allow selection dragging when a picker tool is running.
...
Fixes: lp:1841691
* https://bugs.launchpad.net/kicad/+bug/1841691
2019-08-30 10:33:34 +01:00
d2cd659471
Be better about cleaning up mouse capture.
...
Fixes: lp:1841996
* https://bugs.launchpad.net/kicad/+bug/1841996
2019-08-29 23:56:16 +01:00
359cf384de
Import graphics is a one-shot, not a tool.
...
Fixes: lp:1841975
* https://bugs.launchpad.net/kicad/+bug/1841975
2019-08-29 23:56:16 +01:00
64c012c175
modedit: Enable snapping on anchors
...
The selection of footprint anchor should obey normal snapping paradigm.
2019-08-28 10:38:27 -07:00
a5a237ac32
Improve readability of flag checking.
2019-08-27 19:23:07 +01:00
b3615b36bb
pcbnew: Retain 45° constraint
...
This also finishes the polygon with 45° lines when chosen as a create
option.
Fixes: lp:1833673
* https://bugs.launchpad.net/kicad/+bug/1833673
(cherry picked from commit fccce265aa
2019-08-26 14:36:23 -07:00
03da721030
Move events to wxFormBuilder and fix the missing hookup.
...
Fixes: lp:1841361
* https://bugs.launchpad.net/kicad/+bug/1841361
2019-08-25 20:48:47 +01:00
2622f875ee
Simplify the pad tool menus a bit.
2019-08-24 17:13:35 +01:00
8576668eba
pcbnew: Snap items to grouped layers
...
When moving a group of items, the allowed snapping layers should be each
layer in the group, not just the first item's LSET.
Fixes: lp:1830164
* https://bugs.launchpad.net/kicad/+bug/1830164
2019-08-21 12:32:13 -07:00
aaa44b7348
Honor the {0, 0} reference on the clipboard.
...
Fixes: lp:1840819
* https://bugs.launchpad.net/kicad/+bug/1840819
2019-08-20 19:57:36 +01:00
a25368cc6b
Improve spelling.
...
The groundwork here is thanks to kunda1.
Fixes: lp:1831510
* https://bugs.launchpad.net/kicad/+bug/1831510
2019-08-20 19:14:05 +01:00
b219fbc3d2
Implement undo/redo for lock/unlock/toggle lock.
...
Fixes: lp:1840770
* https://bugs.launchpad.net/kicad/+bug/1840770
2019-08-20 16:39:40 +01:00
1bfefc61ea
Allow mouse drag to initiate a router drag if over a track or via.
...
Fixes: lp:1840694
* https://bugs.launchpad.net/kicad/+bug/1840694
2019-08-19 21:09:44 +01:00
959a4bdded
pcbnew: Don't stack same tool handler
...
The Get and place tool used to live in selection tool and could activate
the edit tool by stacking calls. Now that it is itself in the edit
tool, we cannot stack another call to the edit tool that runs
immediately, instead we allow the GetAndPlace to finish before beginning
the next tool (Move)
2019-08-14 17:12:00 -07:00
045f5f6a61
Move some functions out of SELECTION_TOOL that don't really belong there.
2019-08-13 13:29:18 +01:00
dd938b02df
New move tool doesn't require GetAndPlace to jump through hoops.
...
And at least one of those hoops leaves the cursor forced.
Fixes: lp:1839877
* https://bugs.launchpad.net/kicad/+bug/1839877
2019-08-13 10:01:47 +01:00
f3f0a6899f
Invoke move by ACTION; the EDIT_TOOL does lots of other stuff too.
...
Fixes: lp:1839877
* https://bugs.launchpad.net/kicad/+bug/1839877
2019-08-12 22:21:09 +01:00
3bf24fae7a
Set selection reference point to top-left item.
...
Fixes: lp:1771016
* https://bugs.launchpad.net/kicad/+bug/1771016
2019-08-12 22:21:09 +01:00
cc0bd9a171
Even out PCB_EDITOR_CONTROL and PCB_INSPECTION_TOOL.
2019-08-12 22:21:09 +01:00
79b2ff7551
Refactor deleteTool ACTION removing duplicates
2019-08-12 13:49:55 -04:00
c836cc9cf8
Don't use activate to move as the edit tool must activate for other ops.
...
Fixes: lp:1839534
* https://bugs.launchpad.net/kicad/+bug/1839534
2019-08-10 11:58:05 +01:00
c60118b6a4
Ativate delete tool so it can display the selection clarification menu when needed.
...
Fixes: lp:1835371
* https://bugs.launchpad.net/kicad/+bug/1835371
2019-08-03 22:17:31 -06:00
01e78b04c6
Save last-used-paths in export dialogs.
...
Also fixes the export GenCAD dialog so that browse correctly updates
the textbox.
Fixes: lp:1793761
* https://bugs.launchpad.net/kicad/+bug/1793761
2019-08-02 21:03:48 -06:00
b8a03be869
Flip block around center instead of first item's anchor.
...
Fixes: lp:1789775
* https://bugs.launchpad.net/kicad/+bug/1789775
2019-08-02 16:07:25 -06:00
3f28a1d1cb
Cleanup after cancelled add text dialog.
...
Fixes: lp:1838452
* https://bugs.launchpad.net/kicad/+bug/1838452
2019-07-31 23:10:13 -06:00
987642eb8c
Apply selectable logic to delete tool.
...
Fixes: lp:1838191
* https://bugs.launchpad.net/kicad/+bug/1838191
2019-07-28 12:31:18 -06:00
5347c2ad3d
Clear selection when running drawing tools.
...
Fixes: lp:1837796
* https://bugs.launchpad.net/kicad/+bug/1837796
2019-07-26 23:38:37 -06:00
7314acf053
Renaming.
2019-07-26 13:19:17 -06:00
77334628c4
Change default tool behaviour to skip unhandled events.
...
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
2019-07-26 12:21:24 -06:00
815602d1af
Fix missing AF_ACTIVATE flags on some tools.
...
Fixes: lp:1813659
* https://bugs.launchpad.net/kicad/+bug/1813659
2019-07-26 12:21:24 -06:00
460b03372d
Implement preference for immediate actions.
...
Also pushes prefer-selection-to-dragging to common.
2019-07-25 20:41:22 -06:00
30c724e858
Pcbnew: Mark some strings translatable in menu and/or hotkey list.
2019-07-23 11:53:55 +02:00
1808d8bd40
Add hole-to-hole-minimum checking to via placement.
...
Courtesy of Frank Severinsen.
Fixes: lp:1833214
* https://bugs.launchpad.net/kicad/+bug/1833214
2019-07-21 21:21:11 -06:00
2ca379b281
Copy ratsnest flags when exchanging modules.
...
Fixes: lp:1834214
* https://bugs.launchpad.net/kicad/+bug/1834214
2019-07-21 19:49:13 -06:00
b858fa38c4
Fix crash bugs in picker tools.
2019-07-21 19:06:06 -06:00
bb290abe91
added board statistics dialog, which shows info for production and assembly
2019-07-20 14:39:08 -06:00
d746ba892d
Make sure the postion relative tool gets activated when used.
...
Fixes: lp:1836978
* https://bugs.launchpad.net/kicad/+bug/1836978
2019-07-19 20:14:40 -06:00
02eb1d2c62
Don't try and run drawing tools in ModEdit with no module selected.
...
Fixes: lp:1836673
* https://bugs.launchpad.net/kicad/+bug/1836673
2019-07-19 15:29:10 -06:00
0b08e4dcd2
Deactivate other tools when running one based on a PICKER.
...
In particular, if the last one was a PICKER tool, then we're going
to assert on "click-handler-already-set".
Fixes: lp:1836673
* https://bugs.launchpad.net/kicad/+bug/1836673
2019-07-19 15:29:10 -06:00
b4fc78fc0d
kicad_plugin.cpp: fix incorrect detection of existing footprints in PCB_IO::FootprintExists(), when fp names contain a point.
...
Fixes: lp:1837221
https://bugs.launchpad.net/kicad/+bug/1837221
2019-07-19 18:16:07 +02:00
3de00eef5f
Cleanup.
2019-07-17 21:45:43 +01:00
d67c2d13c7
Fix re-entrancy problem in cross-probing.
...
Fixes: lp:1836940
* https://bugs.launchpad.net/kicad/+bug/1836940
Fixes: lp:1836937
* https://bugs.launchpad.net/kicad/+bug/1836937
2019-07-17 21:35:28 +01:00
7c1049d86b
Fix event-loop issue with some pickers.
...
RunAction returns immediately even when called with "run now" flag.
Fixes: lp:1836905
* https://bugs.launchpad.net/kicad/+bug/1836905
2019-07-17 21:35:28 +01:00
ba7ad7ddf4
Fix bug with PCBNEW_PICKER_TOOL not doing a push/pop.
...
PICKER_TOOL got updated but PCBNEW_PICKER_TOOL didn't.
2019-07-16 20:25:25 +01:00
e816a0c29d
Push Eeschema & PLEditor PICKER_TOOLs down into common.
...
Also implements a more robust push/pop tool strategy for pickers.
2019-07-16 00:44:01 +01:00
58ca5b71a9
A more robust fix for 36f1d023f0.
...
This one also handles when the events get out-of-order due to them
starting out in the Simulation window and not getting dispatched until
the mouse goes over the Schematic window.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
Fixes: lp:1836544
* https://bugs.launchpad.net/kicad/+bug/1836544
2019-07-15 14:15:24 +01:00
a3c74051c2
Allow edits to self-intersecting polygons.
...
1) Intermediate states might be self-intersecting, and we shouldn't
be policing our users on what order to do things in
2) The polygon might already be self-intersecting, at which point we're
preventing the user from fixing it.
Also includes better const management for SHAPE_POLY_SET API.
Fixes: lp:1833831
* https://bugs.launchpad.net/kicad/+bug/1833831
2019-07-14 18:18:48 +01:00
fe188489c7
A better hack for the post-ProgressReporter-loss-of-focus issue.
2019-07-14 18:18:48 +01:00
928d6c5dff
Implement preserved-corners to prevent divots when filling adjacent zones.
...
Fixes: lp:1460787
* https://bugs.launchpad.net/kicad/+bug/1460787
2019-07-14 18:18:48 +01:00
560fda70a2
Update position before first mouse-move-event.
...
Fixes: lp:1780426
* https://bugs.launchpad.net/kicad/+bug/1780426
2019-07-14 10:39:38 +01:00
1dbaa89f95
Fix a bug in tool activation/deactivation and another illegal static_cast.
...
Fixes: lp:1836419
* https://bugs.launchpad.net/kicad/+bug/1836419
2019-07-14 10:39:38 +01:00
37af3adffb
Add preference for flip axis.
...
Fixes: lp:1836267
* https://bugs.launchpad.net/kicad/+bug/1836267
2019-07-14 10:36:48 +01:00
2d17d2b91f
Cleanup and commenting.
2019-07-14 10:36:48 +01:00
f2f2b4bcf9
Explode/Combine in terms of visible elements
...
When generating a complex pad, this allows the user to combine with a
rotated pad and explode rotated pads without needing to rotate elements
to 0 orientation first.
Fixes: lp:1808137
* https://bugs.launchpad.net/kicad/+bug/1808137
2019-07-12 16:55:41 -07:00
c86b4928a7
Fix assert in footprint editor
...
PCB_EDIT_FRAME does not return for footprint editor. The
PCB_EDIT_BASE_FRAME is needed for common fns between pcbnew and modedit
2019-07-12 13:34:30 -07:00
ecc5fc9894
Cleanup.
2019-07-10 01:38:02 +01:00
13d61e4b2b
Cleanup.
2019-07-10 01:14:21 +01:00
483dc24e87
Homogenize selection tools around our HIG.
...
In particular make addative and exclusive-or selections work the
same way.
Also give Highlight Net a hotkey now that it can't use ctrl-click
anymore.
2019-07-09 21:59:46 +01:00
b0b9c5ab63
Fix copy/paste error.
2019-07-09 16:54:02 +01:00
36f1d023f0
Make sure Push/PopTool() go in the right order.
...
Because the pickers are called with an Activate()/Wait() pair, any
usurping tool gets in between the picker handling the cancel (due
to activation) and the picker client doing a PopTool(). The new
tool is therefore pushed before the old tool is popped.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
2019-07-09 15:03:23 +01:00
3a8f32c380
Convert ShowEEschema to an ACTION so it can get a hotkey assignment.
...
Fixes: lp:1686010
* https://bugs.launchpad.net/kicad/+bug/1686010
2019-07-09 00:43:41 +01:00
b8013648d2
Change behaviour of increase/decrease track width & via size when there's a selection.
...
They now modifiy the selection if it contains only tracks and/or vias,
and modify the current widths/sizes otherwise.
Fixes: lp:1814908
* https://bugs.launchpad.net/kicad/+bug/1814908
2019-07-08 22:18:25 +01:00
183687c69e
Cleanup and a big hack to prevent keyboard focus loss.
...
Fixes: lp:1810993
* https://bugs.launchpad.net/kicad/+bug/1810993
2019-07-08 20:45:42 +01:00
772dff7a01
Removed post-page-settings ZoomFitToScreen() calls.
...
Fixes: lp:1834608
* https://bugs.launchpad.net/kicad/+bug/1834608
2019-07-08 00:06:28 +01:00
a11f3a0b80
Make <esc> unhighlight nets, but only after all tools have been cleared.
...
Also moves the Highlight Net hotkey from activating the tool to just doing
a one-shot highlight.
Fixes: lp:1835658
* https://bugs.launchpad.net/kicad/+bug/1835658
2019-07-08 00:02:25 +01:00
986392d88e
Update item at start of drag to erase original location.
...
Fixes: lp:1813038
* https://bugs.launchpad.net/kicad/+bug/1813038
2019-07-07 22:30:18 +01:00
a833aeeacb
Pcbnew: cosmetic enhancement: add missing icons to 2 menuitems in "Route" menu
2019-07-07 18:12:04 +02:00
70ca02537d
Don't split track when via is placed at one of its ends.
...
Zero-length tracks are just a pain.
Fixes: lp:1813077
* https://bugs.launchpad.net/kicad/+bug/1813077
2019-07-06 22:54:31 +01:00
a991625f56
Don't refill zone from external change.
...
We may later add an Automatic Zone Fill option which would restore
this, but for now I'm turning it off to see if it fixes the crash
bug.
Fixes: lp:1834718
* https://bugs.launchpad.net/kicad/+bug/1834718
2019-07-06 22:38:25 +01:00
174c276883
Expose TrackWidthNext/Prev and ViaSizeNext/Prev in hotkey list.
...
Fixes: lp:1835616
* https://bugs.launchpad.net/kicad/+bug/1835616
2019-07-06 20:47:39 +01:00
50f6844e71
Move Zone Display hotkey because Z is already in use (reset grid origin).
...
Fixes: lp:1835471
* https://bugs.launchpad.net/kicad/+bug/1835471
2019-07-06 00:04:54 +01:00
f20335cefe
Apply fix from 5.1 branch.
...
Fixes: lp:1834111
* https://bugs.launchpad.net/kicad/+bug/1834111
2019-07-05 14:45:15 +01:00
a9c66e15ea
Common-ize EE_ACTIONS::refreshPreview and use it after cursor actions.
...
Fixes: lp:1818667
* https://bugs.launchpad.net/kicad/+bug/1818667
2019-07-05 14:45:15 +01:00
bcd48d4bc2
Use common actions where possible.
2019-07-05 14:45:15 +01:00
becd6a6f9d
Microwave tools: better tooltips
2019-07-04 11:28:41 +02:00
1548dcfe8d
Fix typo in Pad Enumeration tool.
...
Fixes: lp:1831950
* https://bugs.launchpad.net/kicad/+bug/1831950
2019-07-03 18:53:13 +01:00
0eed5175cc
Fix crash in Pcbnew drawing tools.
...
Couple of typos: return !cancelled instead of cancel, and some breaks
on the wrong side of the braces.
Fixes: lp:1835172
* https://bugs.launchpad.net/kicad/+bug/1835172
2019-07-03 11:44:30 +01:00
d03041b565
Cleanup.
2019-07-02 21:36:42 +01:00
9460f207f5
Fix misc build warnings
...
This removes unused static function in page layout editor, unused
variable in pcb_painter and restors the gcc unitialized fix for
pcbnew's drawing_tool.
2019-07-02 10:32:49 -07:00
da71a51029
Cleanup.
2019-07-02 00:48:05 +01:00
faa730dfb1
Fix highlight bug.
...
Fixes: lp:1834960
* https://bugs.launchpad.net/kicad/+bug/1834960
2019-07-01 22:15:25 +01:00
9effd24f3a
Allow move tool to run on top of other tools.
...
Fixes: lp:1784480
* https://bugs.launchpad.net/kicad/+bug/1784480
2019-07-01 22:15:25 +01:00
ad26ece8d4
Add Global Edit Text and Graphics Properties to Eeschema.
...
Fixes: lp:1801150
* https://bugs.launchpad.net/kicad/+bug/1801150
2019-07-01 22:15:25 +01:00
743c650129
Move zone refill to action
...
This unifies the zone refill across architecture into the tool-based
architecture. Also provides ZONE_FILLER-based progress managment for
tools.
(cherry picked from commit be9cd98cb1
2019-07-01 09:27:04 -07:00
a498d7e9c5
Try out a new arc-editing paradigm for LibEdit.
...
This is based on the notion that in Kicad the start and end-points
are far more important (as they usually connect to other segments)
than the center is.
2019-06-29 16:10:58 +01:00
981072598b
Overhaul cursor code for new tool/action framework.
...
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
2019-06-27 22:37:11 +01:00
2f23aa9556
Implement a more robust tool stacking architecture.
...
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
2019-06-27 17:01:31 +01:00
e175eb25b8
Fix bug with accidental modification of legacy hotkey name.
2019-06-27 11:29:05 +01:00
fa84babefe
Re-implement sch->pcb cross-probing using net highlighting architecture.
...
Fixes: lp:1827853
* https://bugs.launchpad.net/kicad/+bug/1827853
2019-06-26 21:54:03 +01:00
e785c140b9
Eradicate globals for PCB_GENERAL_SETTINGS.
...
Fixes: lp:1832896
* https://bugs.launchpad.net/kicad/+bug/1832896
2019-06-26 21:54:03 +01:00
4eaba20cd3
Real-time highlighting for Pcbnew and ModEdit delete tools.
2019-06-25 21:10:21 +01:00
7ce38ee6f8
Performance enhancements to zone filling & track DRC.
...
Significant improvement in fetch time for item clearances. On large
boards with lots of nets, maybe 10% faster zone fills and about
2x speedup on track-to-track DRC.
2019-06-25 11:34:28 +01:00
f9702aab87
Immediate actions for PlEditor, PcbNew, etc.
2019-06-25 11:34:28 +01:00
a19c668891
Add tooltip for local ratsnest tool.
2019-06-25 11:34:27 +01:00
f70ab6203b
Make all inner layers available for hotkey assignments.
...
Fixes: lp:1787073
* https://bugs.launchpad.net/kicad/+bug/1787073
2019-06-25 11:34:27 +01:00
ba7cf09ad5
Add zone display mode toggle action.
...
Fixes: lp:1759574
* https://bugs.launchpad.net/kicad/+bug/1759574
2019-06-25 11:34:27 +01:00
4a18f9db3a
pcbnew: Enforce maximum movement in Move Exact
...
This checks the movement against a maximum value that would place the
selection outside of the valid area for the footprint or board.
Fixes: lp:1833478
* https://bugs.launchpad.net/kicad/+bug/1833478
(cherry picked from commit 845833e8fd
2019-06-20 06:40:33 -07:00
c8f254ff92
Don't deselect on activate event; only cancel events.
...
Fixes: lp:1833268
* https://bugs.launchpad.net/kicad/+bug/1833268
2019-06-19 00:19:45 +01:00
aaa7661b94
Check that there's something selected in the tree before exporting.
...
Fixes: lp:1833295
* https://bugs.launchpad.net/kicad/+bug/1833295
2019-06-18 21:50:53 +01:00
dcbd897a95
Push/pop tools even when selected from the toolbar.
2019-06-18 20:24:15 +01:00
7dd247f1dc
Make better use of TOOL_EVENT parameters.
2019-06-18 20:24:15 +01:00
7cfe19d9fd
Cleanup.
2019-06-17 22:15:20 +01:00
1f35ec5521
Beware of copying events and losing the m_passEvent flag.
...
Fixes: lp:1833031
* https://bugs.launchpad.net/kicad/+bug/1833031
2019-06-17 14:44:39 +01:00
5d7739a662
Handle '&'s in menu labels.
...
Fixes: lp:1832904
* https://bugs.launchpad.net/kicad/+bug/1832904
2019-06-17 10:45:23 +01:00
e6d5110ccf
Implement I18N for ACTIONs.
...
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
2019-06-17 10:45:23 +01:00
e4fbd003e0
Make m_passEvent event-specific rather than global.
...
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
2019-06-16 12:06:49 +01:00
6d335f2a82
While Seth fixed the main issue, repeated Activate() calls probably still aren't a good idea.
...
(The main issue was addressed here: 552815d48617c08a6ec29f22c7ecdf1906988e11.)
2019-06-16 11:03:56 +01:00
0f4bdbd184
Tighten down the POINT_EDITORs a bit more.
2019-06-16 01:33:39 +01:00
945eaceb91
Try and keep POINT_EDITOR and SELECTION_TOOL from fighting with drawing tool.
...
Set the IS_NEW flags so the POINT_EDITOR doesn't try an poke its head
in, and apply the EE_SELECTION_TOOL hack for mouse clicks leaking
through to the underlying tools.
Fixes: lp:1832911
* https://bugs.launchpad.net/kicad/+bug/1832911
2019-06-15 20:43:52 +01:00
19aba615c2
Remove selection condition from conditional menu separators.
...
We don't allow duplicate separators anyway so all they really do
is complicate the code.
2019-06-15 20:43:51 +01:00
5610261dce
Immediate-action hotkeys (and context menu actions) for eeschema.
2019-06-15 20:43:51 +01:00
77643fe9b6
pcbnew: Restore select items filter
...
This restores the distinction between selecting tracks and selecting
items in the expand call. It does not yet fully address lp:1832902
2019-06-15 10:08:36 -07:00
2dd82cbca7
Revert the ClearIfOutside logic.
...
This workflow needs better indicators before it will be anything but
confusing.
Fixes: lp:1832714
* https://bugs.launchpad.net/kicad/+bug/1832714
2019-06-14 20:10:04 -07:00
8f84c3ec4f
Grid rid of GetCanvas/GetGalCanvas distinction now that there's only gal.
2019-06-13 19:58:37 +01:00
f0cd7a5fd9
Clean up duplicted Find action processing.
2019-06-13 15:51:32 +01:00
ce1f35a1be
Cleanup some left-over vestiages of the legacy canvas architecture.
2019-06-13 15:51:32 +01:00
df08f9921f
Make place drill origin and place grid origin one-shot commands.
...
Fixes: lp:1751747
* https://bugs.launchpad.net/kicad/+bug/1751747
2019-06-13 15:51:32 +01:00
ae8daee83c
Don't let point editor interrupt other operations.
...
Fixes: lp:1832416
* https://bugs.launchpad.net/kicad/+bug/1832416
2019-06-13 15:51:32 +01:00
daad58e511
pcbnew: Add option to show ratsnest while moving
...
Re-works ratsnest display options in the configuration parameters rather
than the board file. Moves ratsnest options to central preferences
location.
Fixes: lp:1826440
* https://bugs.launchpad.net/kicad/+bug/1826440
Fixes: lp:1821183
* https://bugs.launchpad.net/kicad/+bug/1821183
2019-06-12 17:36:02 -07:00
0571ff6ce2
pcbnew: Centralize selection clearing
...
Also adds check for items before getting BBox.
Fixes: lp:1832601
* https://bugs.launchpad.net/kicad/+bug/1832601
2019-06-12 09:06:23 -07:00
e691704a82
pcbnew: Edit when cursor in in selection
...
Prevents certain edit tools from handling the action unless the cursor
remains inside the selection bounding box.
For now this is a UX test but the behavior may be expanded into Eeschema
as well.
Fixes: lp:1827242
* https://bugs.launchpad.net/kicad/+bug/1827242
2019-06-12 05:28:48 -07:00
2348537769
Add a command to toggle between last two highlighted nets.
2019-06-12 12:43:12 +01:00
60b98a8b4f
Suppress non-Mac warning
...
The return variable is unused, so passing the pointer to a null lambda
drops the warning without incurring compile penalty.
2019-06-11 10:12:00 -07:00
32052d953f
pcbnew: Fix STL blunder when deleting
...
Deleting objects from a container will invalidate the iterator that
contains the object. Correct deleting requires capturing the iterator
returned by the erase function.
Fixes: lp:1832331
* https://bugs.launchpad.net/kicad/+bug/1832331
2019-06-11 10:12:00 -07:00
7726b039b2
Re-jigger standard submenus so they both link AND work.
2019-06-11 18:03:16 +01:00
9625cea57f
Fix hotkey debug spew
...
Two issues:
* Unassigned hotkeys were being passed to WX in the menu strings as
"<unassigned>". WX doesn't recognise this, and prints debug each time.
Unassigned hotkeys are no longer rare or naughty, so we shouldn't provoke
debug spew. Suppress by not appending hotkey strings for actions with 0
(i.e. unassigned) hotkey IDs.
* The zone cutout tool uses GR_KB_SHIFT, not MD_SHIFT. This causes
"unknown hotkey" spew from WX.
2019-06-11 14:40:57 +01:00
b36f982272
Fix typo introduced in DLIST erradication.
...
Fixes: lp:1832030
* https://bugs.launchpad.net/kicad/+bug/1832030
2019-06-11 01:00:43 +01:00
6623ab91a8
Fix issue with picker tool activation.
2019-06-11 00:25:38 +01:00
e9017ce0b1
Update status bar when selected items are modified.
...
Fixes: lp:1831801
* https://bugs.launchpad.net/kicad/+bug/1831801
2019-06-10 23:46:01 +01:00
31ee95c683
Reconcile tool and menu for Enumerate Pads.
...
Fixes: lp:1831950
* https://bugs.launchpad.net/kicad/+bug/1831950
2019-06-10 23:46:01 +01:00
bb96255a03
Fix dangerous static_cast-ing to wrong type.
2019-06-10 23:46:01 +01:00
1f6a5c92d7
Make sure placement menu has a pointer back to its tool.
...
Fixes: lp:1831730
* https://bugs.launchpad.net/kicad/+bug/1831730
2019-06-10 23:46:01 +01:00
5e49517781
Move hotkeys to ACTION architecture.
2019-06-10 23:46:00 +01:00
765606012f
Convert separate-compilation of selection.cpp to polymorphism.
2019-06-10 23:46:00 +01:00
e606587ff6
Move remaining Symbol Tree ctx menu cmds to ACTIONS.
...
Also moves the various Player instantiators down into COMMON_TOOLS
for better sharing.
2019-06-10 23:46:00 +01:00
81c5ba257b
pcbnew: Ensure cursor remains set during tool activity
...
Mouse capture end is called by some actions such as save board. This
resets the cursor image but doesn't change the current tool. Resetting
the cursor image during action prevents this.
(cherry picked from commit 35e87128f5https://bugs.launchpad.net/kicad/+bug/1831888
2019-06-08 10:25:24 -07:00
f1f26a9197
drc_clearance_test_functions.cpp: remove a stupid "optimization code" that creates broken tests (sorry to be rude)
...
Fixes: lp:1831776
https://bugs.launchpad.net/kicad/+bug/1831776
2019-06-06 13:13:37 +02:00
6fab7cc025
Remove a bunch of ugly mutex hacks now that we don't use wxString's UTF8 mode anymore.
2019-06-05 21:23:41 +01:00
2d40425e4d
Move footprint & symbol tree context menus to tool infrastructure.
...
Fixes: lp:1831692
* https://bugs.launchpad.net/kicad/+bug/1831692
2019-06-05 20:16:48 +01:00
15241b7fcf
ACTION-ize toolbar/palette control.
2019-06-04 22:31:42 +01:00
1222f3cc72
ACTION-ize fab outputs.
2019-06-04 22:31:42 +01:00
1ea5b04e22
More ACTIONS work. Nearly done now.
2019-06-04 22:31:42 +01:00
4e11dcfa31
Better error reporting for board edge collisions.
2019-06-04 13:56:54 +01:00
fbfbb64387
A bit of cleanup of stale DRC code.
2019-06-04 13:56:54 +01:00
1bf04d1722
More ACTIONs work.
2019-06-04 00:51:16 +01:00
584ed9e204
Add files accidentally left out of last commit.
2019-06-04 00:51:16 +01:00
59a01789ff
Show board info in status bar when seleciton isn't a single object.
...
Fixes: lp:1831402
* https://bugs.launchpad.net/kicad/+bug/1831402
2019-06-03 21:52:59 +01:00
3912c7407f
Move global commands to ACTIONs.
...
Also fixes a crash bug opening Edit Tracks and Vias dialog.
2019-06-03 21:08:30 +01:00
568c8c336b
Move DRC control to a tool; move assorted commands to ACTIONS.
2019-06-03 21:08:30 +01:00
9f1e2e34b7
Move some dupicated tools to common tools.
2019-06-03 21:08:30 +01:00
be54f357eb
Better tooltip, more easy to translate
2019-06-03 18:27:17 +02:00
95ab0b1813
pcbnew: Hide dynamic ratsnest after canceling edit
...
The dynamic ratsnest is shown while moving items but this needs to be
hidden after cancelling. Previously this was handled by the
SelectionClear event but we've changed this to (correctly) keep the
previous selection when canceling.
Fixes: lp:1831350
* https://bugs.launchpad.net/kicad/+bug/1831350
2019-06-02 20:25:02 -07:00
1f30d0c803
pcbnew: remove the last dlist components from pcbnew
2019-06-02 20:06:11 -07:00
99756efea5
Use GetFirstModule() for call that can be NULL
2019-06-02 20:06:11 -07:00
cbea5149cb
pcbnew: Cleanup context menu ordering
2019-06-02 21:10:56 +01:00
da4fe27447
More ACTIONS work.
2019-06-02 21:10:56 +01:00
33773bad4d
Yet more command conversions to ACTIONs.
2019-06-02 21:10:56 +01:00
6ac273264d
Move Show3DViewer to common action.
2019-06-02 16:21:44 +01:00
208a8553a5
pcbnew: Add context menu to measure tool
...
Fixes: lp:1831063
* https://bugs.launchpad.net/kicad/+bug/1831063
2019-06-02 07:55:29 -07:00
6a45446496
pcbnew: Remove the last dlist from modules/pcbnew
2019-06-01 20:55:32 -07:00
9163ac543a
pcbnew: Move pads to std::deque
2019-06-01 16:23:54 -07:00
888c01d11b
pcbnew: Move tracks to std::deque
2019-06-01 09:53:23 -07:00
d1877d7c1b
Moving modules from DLIST to std::deque
2019-06-01 09:53:23 -07:00
961b22d603
pcbnew: Changing drawings from dlist to std::deque
2019-06-01 09:51:57 -07:00
f67df4bf11
Collapse ARRAY_CREATOR into single class now that legacy instance is gone.
...
Also removes AllowLegacyCanvas ADVANCED_CONFIG option.
2019-06-01 16:29:12 +01:00
c1298570cb
Remove legacy routing options.
2019-06-01 16:29:12 +01:00
7553cc2651
Clean up some dangling legacy odds and ends.
2019-06-01 01:17:46 +01:00
30ad8e9369
Pcbnew, file menu: fix missing initialization of Append Board menuitem
2019-05-31 18:28:31 +02:00
d0926cce58
PcbNew: prevent crash in point editor if selection gets invalidated
2019-05-29 21:27:59 -04:00
1e9da7f57b
Remove CurItem() architecture and legacy routers and drawing code.
2019-05-29 00:26:30 +01:00
0260b32125
Push resetLocalCoords down into COMMON_TOOLS.
...
Fixes: lp:1830693
* https://bugs.launchpad.net/kicad/+bug/1830693
2019-05-29 00:26:29 +01:00
6936effaa7
Implement undo for Page Settings in PlEditor, Eeschema and PCBNew.
...
Fixes: lp:1820059
* https://bugs.launchpad.net/kicad/+bug/1820059
2019-05-27 11:58:55 +01:00
638ac3838c
PcbNew: Fix layer alpha overrides being overwritten by color changes
...
Fixes: lp:1827518
* https://bugs.launchpad.net/kicad/+bug/1827518
(cherry picked from commit cb3edf2607
2019-05-26 20:20:53 -04:00
568d4e2b19
Avoid including id.h in a lot of files that do not use it.
2019-05-26 08:14:25 +02:00
85f984ccd9
Add point-editor activation for immediate-mode drawing.
2019-05-24 19:49:09 +01:00
323bb0f8e1
Moving PageLayout editor to GAL canvas and modern toolset.
2019-05-24 19:49:09 +01:00
75cea18f07
Pcbnew, toolbars: fix incorrect icons
2019-05-23 11:07:55 +02:00
67cc2aac2e
Rework Eeschema find/replace for modern toolset.
...
Fixes: lp:1827274
* https://bugs.launchpad.net/kicad/+bug/1827274
Fixes: lp:1827240
* https://bugs.launchpad.net/kicad/+bug/1827240
2019-05-22 21:48:04 +01:00
b90b454ada
Remove legacy block operations.
2019-05-18 00:21:49 +01:00
jean-pierre charras
Jeff Young
Jon Evans
Peter Montgomery
Seth Hillbrand
Eli
Ian McInerney
Mikołaj Wielgus
Michael Kavanagh
Oleg Endo
Simon Richter
Andrew Downing
Tomasz Wlostowski
Alexander Shuklin
Fabien Corona
Mark Roszko
Seth Hillbrand
Ross Schlaikjer
Alexander
John Beard