6fcb95b24e
ADDED user-defined signals.
2023-02-21 13:32:01 +00:00
f6fcae479c
Don't generate error messages fetching sim data we know isn't there.
2023-02-21 13:32:01 +00:00
b05b33a9ff
Fix a compil issue with gcc12.2 and Coverity warnings.
2023-02-21 11:54:38 +01:00
31be74b8b3
Fix a few Coverity warnings
2023-02-20 09:25:01 +01:00
d55e2049e5
Silence some warnings with static_casts
2023-02-18 23:36:50 -05:00
aacc9746e3
Yeet the last of wxSize/wxPoint to stop leaking gdicmn everywhere
2023-02-18 22:57:18 -05:00
facd50f4fd
sim - missing assignment
2023-02-18 15:36:47 +00:00
07f79208b9
Minor fixes: Coverity and compil minor warnings.
2023-02-18 13:04:43 +01:00
5482bc2905
sim - Check FindParam() results before using them
2023-02-18 12:54:55 +01:00
f5902dad28
sim - don't write dc parameter twice
2023-02-18 10:07:29 +00:00
fa0cc09917
sim - allow sources that are both AC and TRAN
2023-02-18 02:17:48 +00:00
39a1b14a0f
sim: VSIN - allow user to specify a phase
...
TD is not the same as PHASE.
TD is the delay before the source turns on.
PHASE is ... the phase
If only TD is set, the signal starts later, but the phase is still 0 when compared to the t=0 of the simulation.
2023-02-18 00:38:46 +00:00
8b1318c92f
Update associated data structures after changing trace colour.
...
Also removes likely benign but never-the-less useless grid even processing
during rebuilding of the grids.
Fixes https://gitlab.com/kicad/code/kicad/issues/13956
2023-02-17 00:47:01 +00:00
d5e50b70bb
Display a generic "Value" column label when there are no cursors.
2023-02-16 16:55:26 +00:00
f50d114b27
Push gain & phase for .probe statements in AC analysis.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13941
2023-02-16 16:14:25 +00:00
95232edd0d
Do a better job of looking for .probe commands in directives.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13941
2023-02-16 12:42:54 +00:00
d8a4f9821e
Smarten regex to accept ':' in signal names.
...
(In fact, just accept anything up to the closing paren.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13942
2023-02-16 12:20:55 +00:00
c618bb7046
Correctly netlist a voltage source with both AC and DC values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13912
2023-02-15 14:50:31 +00:00
dca1281263
Fix some typos
2023-02-14 23:47:05 +02:00
9ce18dffdd
Better startup experience for simulator.
...
Pre-load signals list (and plot panel if there is an schText simulation
command).
Also fixes a bug where the workbook was getting dirtied on open because
the events would fire after the dirty flag had been cleared.
2023-02-14 11:59:17 +00:00
df00585a55
ReadDataFields must be a separate step from Create.
...
Create() is done without execption processing, while ReadDataFields
should have exception processing.
(This also fixes a case where exception processing on ReadDataFields
was missing.)
Also fixes a bug where the pinSelect menu wasn't checked for -1 before
fetching.
Fixes https://gitlab.com/kicad/code/kicad/issues/13856
2023-02-13 12:43:25 +00:00
2cc3d8e9bc
Prevent a crash when a spice SW_I lacks two pin net names
...
Fixes KICAD-5D
2023-02-12 22:26:19 -05:00
74eb587291
Better sorting within sections (voltage, current, power).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13846
2023-02-12 23:16:45 +00:00
4665823089
Turn on and fix MSVC compliance mode issues
...
We want /permissive- to enable debug performance improvements in MSVC 17.5+.
This flag is also default under C++20 so we'll have to deal with these compile issues anyway at some point in the future.
In particular, MSVC becomes pedantic about ternary types.
See https://learn.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance?view=msvc-170#ambiguous-conditional-operator-arguments
MSFT cites https://cplusplus.github.io/CWG/issues/1805.html
2023-02-12 16:30:37 -05:00
6af3dadaee
Fix SPICE pins for BJTs and MESFETs
...
- MESFETs don't have a substrate/bulk pin
- BJTs have a substrate pin, and HICUM/VBIC have TJ
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13848
2023-02-12 21:20:02 +00:00
a22964a977
Prepend correct SPICE prefix when necessary for plotting currents.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13850
2023-02-12 21:17:45 +00:00
1e756dbdd8
Save cursor positions in sim workbook.
2023-02-12 20:40:23 +00:00
83dd06e5d1
Allow opening of workbook when simulation frame is opened.
...
This involved splitting creation of traces from setting of trace
data.
Also renamed SIM_WORKBOOK to SIM_NOTEBOOK. This class is a subclass
of wxAiuNotebook and represents the collection of simulation plot tabs.
It is NOT the same thing as a simulation workbook, which contains other
stuff such as measurements, plotted signals, colours, etc.
This also removes a bunch of "friend" declarations.
2023-02-12 20:40:23 +00:00
78746b77c6
Save trace colors and cursor value formatting in sim workbook.
2023-02-12 20:40:23 +00:00
84c72b087c
Simplify (and fix) logic for starting new simulations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13853
2023-02-12 20:40:23 +00:00
1fb2d138b4
Fix a compil issue.
2023-02-12 09:16:42 +01:00
9d3a3d705d
ADDED simulation measurements.
2023-02-11 21:11:07 +00:00
e5176ff4d6
ADDED power dissipation plotting and cursors.
...
Also fixes a bug so that voltages, currents and power dissipations are
only probed if the flag is set -- this keeps ngspice from throwing an
error if you probe something twice (for instance, if you have .probe
commands in text and turn off the auto-probing).
2023-02-11 21:11:07 +00:00
bc108023b3
ADDED operating point overlay for SCH_EDIT_FRAME.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11253
2023-02-11 21:11:07 +00:00
2a5bb71fbd
ADDED operating point text variables for labels and symbols.
...
ADDED formatting for cursors and operationg points
Also fixes a bunch of bugs to make the new cursors work with .ac sims.
Fixes https://gitlab.com/kicad/code/kicad/issues/11253
Fixes https://gitlab.com/kicad/code/kicad/issues/6965
2023-02-11 21:11:07 +00:00
b3ffbd6258
Don't include unconnected nets in signals list.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4961
2023-02-11 21:11:07 +00:00
39d35a8bec
Better cursor feedback for plot window.
2023-02-11 21:11:07 +00:00
9a99106981
Cleanup.
2023-02-11 21:11:07 +00:00
f0bd25b397
ADDED use-settable simulation trace colors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2536
2023-02-11 21:11:07 +00:00
09822c7f18
ADDED direct access to signals & cursors.
...
ADDED differential cursors.
Fixes https://gitlab.com/kicad/code/kicad/issues/4447
Fixes https://gitlab.com/kicad/code/kicad/issues/6221
2023-02-11 21:11:07 +00:00
6bc89ee180
Don't disable run when there's no command: just ask for a command.
2023-02-11 21:11:07 +00:00
7d7a48070e
Separate error messages when sim model and project paths are the same.
2023-02-11 21:11:07 +00:00
a1a1a49729
On-the-fly language updates for simulator window.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13357
2023-02-11 21:11:07 +00:00
b000d68def
Move simulator to tool framework.
2023-02-11 21:11:07 +00:00
946e0a4b98
ADDED support for e-series based tuning.
2023-02-11 21:11:07 +00:00
81a55c42a1
Fix unintentional string change in IBIS parser.
2023-02-11 02:19:06 +03:00
3d23d0e16a
Fix compatibility with wxWidgets 3.0.5
...
Fixes #13808
https://gitlab.com/kicad/code/kicad/issues/13808
2023-02-07 21:09:03 +01:00
4065e413ea
Ibis parser: do not report activity when there are no errors.
...
The dialog to add a library expects no message when there are no error.
Fixes #13794
https://gitlab.com/kicad/code/kicad/issues/13794
2023-02-06 12:55:52 +01:00
d1f6ba77e8
Better error reporting, and don't infer models with library references.
2023-02-04 20:55:52 +00:00
56a1cdb4dc
Allow a limited set of un-braced expressions in SPICE model values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13768
2023-02-04 19:49:48 +00:00
e8397a33bb
Refrain from copying SPICE_INFO.
2023-02-04 00:05:50 +00:00
a51dc8c9de
HiSIM_HV MOSFET models are *not* the default type
...
The ngspice manual does not indicate that there is any default
model type. This change ensures we get a `level=xy` written out to the
.model line when we select a HiSIM_HV model.
2023-02-04 00:03:25 +00:00
5abe1a201b
spice: generate .model lines for all device types
...
- generate .model lines in spice netlist for all device types that need
one
- add "level=<n>" to .model line for non-default model levels. This is
necessary to allow more sophisticated models to be used, and some
devices *always* need a level specified (e.g. JFETs)
- add "version=<n>" to .model line for models that have multiple
versions available (AFAIK only affects HiSIM_HV MOSFET models)
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13775
2023-02-04 00:03:25 +00:00
41c4ee2245
ngspice requires J prefix for JFETs in netlist
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13774
2023-02-04 00:03:25 +00:00
ed5fb2769f
Allow more characters (in particular '_') in code model names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13769
2023-02-03 23:49:53 +00:00
8b03c093f9
Move potentiometer pin model to r0, wiper, r1, and remove flipping code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13741
2023-02-02 16:22:13 +00:00
ab0c4dd292
Must do pin swap in model pins, not item pins.
...
Item pins might not be in the same order.
Fixes https://gitlab.com/kicad/code/kicad/issues/13741
2023-02-02 12:44:55 +00:00
b4a75cd1d5
Write out a diode .model for built-in diodes.
2023-02-01 12:36:27 +00:00
123467c8dd
Don't throw up debug message when signal is deleted.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13711
2023-01-30 21:32:18 +00:00
c939b1ef76
Followed-by-3-digits doesn't guarantee a thousands separator.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13708
2023-01-30 21:22:48 +00:00
4e50c5313d
More safety for array access.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13583
2023-01-24 00:07:40 +00:00
00f93db2ff
Convert wide chars before reading model
...
The PEGTL parser used by KiCad for SPICE models only handles ASCII
characters. Despite the docs stating that you can, in theory, parse a
UTF-8 character by reading the base string, in pratice this does not
work as the UTF-8 string is represented by unsigned chars and the PEGTL
string is based on signed char.
To work around this, we need to convert micro and mu to the ASCII 'u'
equivalent
Fixes https://gitlab.com/kicad/code/kicad/issues/13642
2023-01-23 15:23:41 -08:00
542719c753
Add "all" mode to HSPICE emulation.
2023-01-21 19:32:25 +00:00
4d7ddf619a
Remove unused var and cleanup
2023-01-20 13:26:11 -08:00
f7ebaf1bab
Add compatibility mode for netlist code.
...
(The non-A compatibility modes only run on included files.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13589
2023-01-20 18:06:17 +00:00
ee3e285393
Correctly parent simulator netlist error dialogs.
2023-01-19 07:59:30 -05:00
0e778f17db
Add context menu for simulation cursors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13580
2023-01-19 12:50:21 +00:00
959e20f52c
A fall-back model for FOO should supply FOO's pin names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13589
2023-01-19 12:14:50 +00:00
1df81b10e6
Explicitly convert std::string to wxString
...
In wxWidgets STL builds the compiler has multiple, ambigous choices
for converting - both arguments to std::string first, or just the
first to wxString.
Fixes #13432 .
2023-01-14 22:58:54 +00:00
4c5a344629
Allow editing of raw SPICE models through code tab.
2023-01-14 02:43:34 +00:00
098d2b30a2
Support for simulation options in workbook and simulation command dlg.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13524
Fixes https://gitlab.com/kicad/code/kicad/issues/13523
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
2023-01-14 00:21:45 +00:00
e7e2085b2a
Allow vector param values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
2023-01-13 21:59:06 +00:00
7fbad183db
Gracefully handle Quit when simulator window is open.
2023-01-13 16:35:45 +00:00
4391fc7a7a
Don't be annoying about refusing to create traces when there's no data.
2023-01-13 16:35:45 +00:00
52163c7b31
Hold off on one-library-per-SIM_LIB_MGR. It's too risky for 7.0.
2023-01-12 16:29:51 +00:00
d839f11d49
Rip out parsing of SPICE libraries for netlisting.
...
We only need to parse the libraries for the Sim Model Editor dialog
(so that we can determine the models to put in the popup). Doing it
for netlisting just opens us up to incorrectly parsing the SPICE, and
returns no value.
This also means that a SIM_LIB_MGR manages a single library, and
never multiple libraries.
This also allows the tidying-up of some error reporting structures to
better inform the user what went wrong.
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
2023-01-12 14:51:03 +00:00
c43050b91b
Remove safety around reading default parameter from Value field.
...
This should be OK now because we should be writing out all parameters
now (even if they're default value).
But perhaps more to the point, if we have the safety in there then
we miss cases where we really can't parse the model (value of "{VCC}")
and we need to fall back to a raw spice model.
Fixes https://gitlab.com/kicad/code/kicad/issues/13444
2023-01-09 15:24:45 +00:00
d65cf1b457
Check parameters before assuming we can handle the model.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13444
2023-01-08 18:00:22 +00:00
4d7642a26c
Add number of pulses parameter to pulsed voltage/current sources.
...
Also don't suppress writing "0" valued parameters.
Fixes https://gitlab.com/kicad/code/kicad/issues/13401
Fixes https://gitlab.com/kicad/code/kicad/issues/13402
2023-01-06 13:45:56 +00:00
7af718f1a5
Don't use std::string for things with wxString APIs.
...
It's too bug-prone.
Fixes https://gitlab.com/kicad/code/kicad/issues/13380
2023-01-05 14:16:39 +00:00
cbe6cd3048
Don't move local vars
...
Copy ellision allows optimization if we don't explicitly move a local
variable in the return
2023-01-03 10:20:18 -08:00
baa13b885f
Don't add Sim.Params unless it contains data, and update sallen key demo.
2023-01-03 17:20:23 +00:00
9583b28063
Fix store-in-value bugs.
...
1) Always honour the dialog checkbox value.
2) Don't expect the absence of the primary parameter in Sim.Params to
mean that Value stores it. It might be the default parameter value.
3) Update spiceTypeInfo when matching legacy data to an internal model.
4) Initialize the store-in-value checkbox depending on whether or not
we found the primary parameter in the Value field.
2023-01-03 17:20:23 +00:00
9b9795a87d
Reduce reliance on exception processing -- it's waay too bugy at present.
...
This moves some stuff to REPORTER APIs. Moving more stuff would be good,
but it probably too high-risk at present. We'll wait for 8.0 for that....
Fixes https://gitlab.com/kicad/code/kicad/issues/13359
2023-01-03 17:20:23 +00:00
fdc8f9c59d
Fix accidental deletion in "TEXT_ATTRIBUTES" commit.
2023-01-03 01:23:18 +00:00
7f35323416
Re-enable sim model ERC testing.
2023-01-03 00:59:14 +00:00
277cd73204
TEXT_ATTRIBUTES doesn't hold the position.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13350
2023-01-02 17:36:21 +00:00
e8114dc49a
Minor compil and Coverity warnings fixes.
2023-01-02 10:21:42 +01:00
62f0843579
Fix grammar error in warning string.
2022-12-31 18:54:36 +00:00
55b8f0bc00
Gracefully fall back to raw spice when we can't parse the data.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13329
2022-12-31 18:52:26 +00:00
77b361a077
Add reference material to SPICE model pin assignment tab.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13309
2022-12-31 18:52:26 +00:00
5deee405da
Fill in built-in-model-type (which might not be the same as initial spice type).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13324
2022-12-31 01:07:46 +00:00
62bec69d8c
Migrate field text attrs from legacy fields.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13323
2022-12-30 23:41:46 +00:00
d50b3550af
Signals header is repetitive.
2022-12-28 10:40:23 +00:00
ef6001bfe6
Use consistent terminology: opposite of Add is Remove.
...
Note: violating string freeze because this change should ease translation,
not make it harder.
2022-12-28 10:40:23 +00:00
e11d39b0f2
If magnitude or phase is specified, don't add both.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13202
2022-12-28 10:40:23 +00:00
3767716f20
Menu IDs of 0 don't work on Mac.
2022-12-28 10:40:23 +00:00
572c10b2c4
If we don't recognize a var then it's an error, not 0.0.
2022-12-27 13:50:44 +00:00
39a23fa9bc
Only eval numeric properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13201
2022-12-27 13:50:44 +00:00
80f3abe082
Event safety.
...
Sentry crash probably happens when an update title event fires either
too early or too late to have a simulator or simulator settings.
Sentry issue https://sentry.io/organizations/kicad/issues/3669444623/events/fce0179f7d5e4ff3a7dbb0d90a0570b4/
2022-12-26 20:33:04 +00:00
424cdf6699
Overflow safety.
...
Sentry issue https://sentry.io/organizations/kicad/issues/3419671947/events/11212297e66c47c7af7144b5f075e88c/
2022-12-26 20:33:04 +00:00
bf1c4e7bcd
Allow translation of simulation error messages.
2022-12-24 11:30:56 +00:00
6f44468385
Fix more lifetime issues in simulator tuning.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13257
2022-12-23 22:03:24 +00:00
981254543a
Allow line-continuations in name=value parameters.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13255
2022-12-23 20:05:16 +00:00
8069e5d5d6
Fix sim bug running a command the first time when no command in doc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11366
2022-12-23 18:21:26 +00:00
bfd3b40672
Bug fixes for tuning.
...
1) Don't save SCH_ITEM pointers in long-lived structures. Use KIIDs
instead.
2) Use the correct sheet for the referenced item, not the current sheet.
2022-12-23 17:40:36 +00:00
604d7a72d6
Fix bug in tuning when value is stored in Value field.
2022-12-23 17:40:36 +00:00
3f49fa5361
Don't write sim.params for library model unless we actually have overrides.
2022-12-23 12:46:18 +00:00
cd7be966c0
Fix typo when un-escaping parameter name.
2022-12-23 12:46:18 +00:00
7f60b87d1d
Implement fallback models for SPICE .lib models that we can't parse.
2022-12-22 22:35:09 +00:00
7abfa46531
Inferred sim value improvements, and a unit test for them.
2022-12-21 17:03:49 +00:00
e64852c833
Clearer naming.
2022-12-21 17:03:46 +00:00
e7e3f3bced
SIM_MODEL code simplification.
...
1) Reduce API surface.
2) Prefer for(int) loops when what we're looking for is the index of
the item to be found
3) Move "_" escape processing to SIM_MODEL_NGSPICE (which is the only
model which uses the escape mechanism)
2022-12-21 17:01:58 +00:00
8e4911bba2
Simulation: make a few errors thrown from PEGTL a bit more understandable.
2022-12-20 18:54:14 +01:00
8db015bc0f
Accept thousands separators in inferred values.
2022-12-19 20:05:54 +00:00
58ce0bb804
Simulation bug fixes.
...
1) Use C-locale when converting output of parsers to strings.
2) InferSimModel() must run on local copy of fields, not the fields in
the symbol (which might be different if they've already been edited in
the Symbol Properties Dialog, for instance).
3) InferSimModel() should accept a deviceType already set to RLC.
4) Don't output trailing decimal separators if there's no fraction.
2022-12-19 18:14:13 +00:00
cbb70f0da1
Formatting and CLang-Tidy warning reduction.
2022-12-19 13:51:49 +00:00
a3a2e2e5b1
Update demos and legacy qa files SpiceMapping -> Spice_Node_Sequence.
...
Also removes migration in the code as it will no longer be needed.
2022-12-19 12:04:53 +00:00
04f50ce687
Generate default pinMap from symbol's pins when we don't know SIM_MODEL's pins.
2022-12-19 11:40:52 +00:00
df8eb59854
Don't use SPICE_MODEL_SUBCKT::CreatePins to crate a default pinMap.
...
(It creates a fully-unconnected map on the premise that it's easier
to add a pinMap than to edit one. This is probably no longer true
now that you don't have to un-assign a pin before re-assigning it.)
2022-12-19 11:40:52 +00:00
1ce6cd6d4d
Naming clarity.
2022-12-19 01:51:24 +00:00
7433322778
Handle a couple more legacy formats found in legacy_sallen_key demo.
2022-12-19 01:47:23 +00:00
b06c245b8f
Don't double-add DC parameters.
...
(Remember that DC's inlineTypeString used to be "".)
2022-12-19 01:19:55 +00:00
7192c565b8
Add simple VI model inference.
2022-12-18 22:54:12 +00:00
a9acb2e215
Fix incorrect format in a wxString::Format()
2022-12-18 20:30:15 +01:00
8324c0b0cc
Fix event order bugs in Sim Model Editor dialog.
...
onParamGridChanged was firing before CommitPendingChanges which meant
the edited value didn't get saved if the editor was still open when
OK was clicked.
2022-12-17 22:33:00 +00:00
321de57d7c
Bug fixes for simulator.
...
1) Finish removing pin-count based APIs. We need to know the pin names
as well, not just the count.
2) Fix a bug in the regexp for SPICE functions to allow both lowercase
and uppercase function names
3) Move CreatePins() overrides to the new API so that we get pins on
raw SPICE models.
Fixes https://gitlab.com/kicad/code/kicad/issues/13190
2022-12-17 20:29:24 +00:00
6b70c679cf
Migrate more V6 SPICE syntax to V7.
...
Also fixes various bugs if symbols contained non-indexed pin numbers.
We really need to know the actual pin names when creating models, rather
than just assuming 1, 2... etc.
Fixes https://gitlab.com/kicad/code/kicad/issues/13183
2022-12-17 15:23:51 +00:00
dba3c589d0
More bug fixes for escaped model parameters.
...
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....
Fixes https://gitlab.com/kicad/code/kicad/issues/13179
2022-12-16 16:34:41 +00:00
08a8a20794
Sort pins in numeric order before attempting to match to SPICE model.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13164
2022-12-16 14:18:44 +00:00
24786fe0e9
Fix multi-unit symbol bugs.
...
1) SPICE pins need to include all units
2) Already-seen-unit-x needs to be reset when getting netlist again.
Fixes https://gitlab.com/kicad/code/kicad/issues/13164
2022-12-16 13:57:46 +00:00
6d5a9153ab
Move resolve function to general usage
...
Libraries are created multiple times, so we need to resolve the library
locations each time
Fixes https://gitlab.com/kicad/code/kicad/issues/13083
2022-12-15 15:34:48 -08:00
a41f27a022
Silence Coverity.
2022-12-15 18:14:19 +00:00
bb7682f913
Resolve using env/project if lib isn't found
...
Relative include commands resolve in the following order:
1. local to the file from which they are included
2. local to the project
3. local to the SPICE_LIB_DIR directory
Fixes https://gitlab.com/kicad/code/kicad/issues/13083
2022-12-15 09:41:25 -08:00
f0a8182532
Update for wx3.0 compatibility
2022-12-14 16:41:52 -08:00
b2e512bfab
We must infer a pinMap when inferring other fields for RLC passives.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13162
2022-12-14 23:23:41 +00:00
a2ba9137b8
Use only first letter of prefix for RLC primary value name.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13162
2022-12-14 23:23:41 +00:00
10a3d57193
Add sim_lib callback to resolve embeded libs
...
Also teach parser to look for include directives in libraries
We get KiCad variable resolution in include pathnames for free.
Fixes https://gitlab.com/kicad/code/kicad/issues/13083
2022-12-14 13:31:41 -08:00
cdcf875ec0
sim_model: Fix another not handled exception that fully freeze Eeschema.
...
Can happens with schematics with old sim parameter syntax.
Fix also another crash in sim_model.
2022-12-14 17:47:20 +01:00
ce6378fed3
Use symbol pin names for left-hand-side of auto-generated pinMaps.
2022-12-14 15:13:29 +00:00
6abdfc76da
Replace 1:1 pin map on legacy conversion now that we can accept indexes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13152
2022-12-14 14:22:35 +00:00
77998d7c51
Better fix for not selecting all of netlist.
2022-12-14 14:13:25 +00:00
13d9b061ee
Don't select all of netlist when showing it in simulator.
2022-12-14 13:36:29 +00:00
e41b0775db
Fix a bug with underscores being appended to spice param names.
2022-12-14 13:36:29 +00:00
50ccc4e6da
Fix issue converting legacy SPICE models.
...
1) if a legacy model references a library then we need to see if said
libraray exists and read model from it if so
2) legacy node ordering is by index, not pin name
3) we can't auto-generate a pin map when we don't know the pin names,
so don't try
2022-12-14 13:36:28 +00:00
bbdb30135e
sim_model: Fix a not handled exception that fully freeze Eeschema.
...
Can happens with schematics with old sim parameter syntax.
2022-12-13 11:15:02 +01:00
ca5c0e2ac5
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13137
2022-12-12 14:42:45 +00:00
419fe236ad
Fix logic error in parsing sim command, and DC source types in dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9064
2022-12-11 23:12:55 +00:00
b2498f5673
Coding standards & formatting.
2022-12-11 23:12:55 +00:00
bdf13ade7a
Fix a compil issue on linux, round 2
2022-12-11 20:43:10 +01:00
32995a31c6
Fix a compil issue
2022-12-11 20:19:56 +01:00
5c53daadb0
Mostly coding standards, but also quote codemodel names before passing to spice.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12687
2022-12-11 18:42:57 +00:00
9c129ed03f
More dialog adjustments for wx 3.2. Also renames files to match dialog.
2022-12-11 15:49:29 +00:00
56aae7a147
Reduce compiler warnings.
2022-12-11 13:39:59 +00:00
3581a9773f
Move simulator settings disposal earlier so it happens before parent.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12370
2022-12-11 01:32:20 +00:00
be8f99e8fe
Another fix to avoid conflict names issues with mingw + pegtl.
...
Fixes #13118
https://gitlab.com/kicad/code/kicad/issues/13118
2022-12-10 14:28:05 +01:00
e74654a20f
Minor fix to avoid conflict names issues with mingw + pegtl.
2022-12-10 08:21:35 +01:00
1599490197
Formatting.
2022-12-09 22:25:14 +00:00
1baec20cf6
Handle SPICE <-> SI conversions in inferred models.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13112
2022-12-09 22:02:52 +00:00
60c937186a
When migrating simulation models update value to a reference.
2022-12-09 20:24:25 +00:00
05b9836f60
Remove ugly hack of passing SCH_SYMBOL as parent of LIB_FIELD array.
...
Also adds simulation model inference to Symbol Editor's Simulation Model
Editor, and adds write-back from both Simulation Model Editors to their
parent Symbol Fields Editor dialogs.
Fixes https://gitlab.com/kicad/code/kicad/issues/12505
2022-12-09 20:24:25 +00:00
3ae404f764
Move model inference to SIM_MODEL so it can also be used for behavioral models.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12505
2022-12-09 20:24:25 +00:00
8931e55dd2
Templatize MigrateSimModel() so it can be used on LIB_SYMBOLs as well.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13080
2022-12-08 23:57:43 +00:00
e8980e9024
Centralize SPICE lib path resolution and support SPICE_LIB_DIR.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13081
2022-12-08 23:57:42 +00:00
bb6544914e
Bring simulator file menu commands more in line with rest of Kicad.
2022-12-08 23:57:42 +00:00
5251ea6f27
Prevent crash on exit due to simulator settings being double freed
2022-12-07 21:04:49 -05:00
b15913bd53
Support env variables in spice library paths.
...
Also removes a bunch of std::string stuff from the file handling in the
simulator. All our file handling, env variable expansion, project path,
etc. stuff is wxString based, and jumping through std::string in between
just makes it more complex and increases the potential bug surface.
Also fixes a bug where you'd get two error messages when a spice model
library wasn't found.
Also fixes a bug where you'd get a spice model library not found error
when the text field was empty.
Also fixes a bug where we'd try to absolutize a path starting with an
unresolved text or environment variable. If the path starts with a
variable it's probably absolute, and tacking on the project path in the
error message just obfuscates things.
Fixes https://gitlab.com/kicad/code/kicad/issues/13082
2022-12-07 15:07:25 +00:00
4872dd7238
Don't put empty lines in the workbook.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12299
2022-12-07 11:39:47 +00:00
69448afb47
Don't run simulation twice when the sim command is overridden.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12731
2022-12-07 01:34:56 +00:00
3836ec481f
Add fixups for legacy syntax used during 7.0 development.
2022-12-06 16:01:18 +00:00
39ad7c8205
Formatting and Kicad naming conventions.
2022-12-06 16:01:18 +00:00
38906397d2
Move V6->V7 sim model migration from sheets to screens.
...
Also moves passive RLC inference out from migration to just-in-time
creation for the simulator or netlisting.
Also fixes a version guard mismatch because the spice migration was
done inside UpdateSymbolInstances (which has its own version guard).
Also changed UpdateSymbolInstances to UpdateSymbolInstanceData so
someone else in the future doesn't think it's a general-purpose symbol
instance updater.
2022-12-06 16:01:18 +00:00
f8e0a272c0
Remove a bunch of 'auto'.
2022-12-06 16:01:18 +00:00
4c76082f77
"Sim Params/Settings" -> "Sim Command"
...
The window only really sets the simulation command.
In the future, we might want a simulation setting window with things such as SPICE optimizations.
2022-12-05 23:12:04 +00:00
8e4cd1e1a6
Check for sheet directive changes when running simulations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10486
2022-12-05 20:03:42 +00:00
7e1fecaf2e
Formatting.
2022-12-05 20:03:42 +00:00
b7d41e0e56
Update simulator with NUMERIC_EVAL, decimal separator processing, etc.
...
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
2022-12-05 12:40:29 +00:00
1855885d1e
Gracefully handle spice models not recognized by KiCad.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12689
2022-12-04 21:06:35 +00:00
f29f0c5c0a
Don't push a model that didn't load.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12689
2022-12-04 21:06:35 +00:00
672927e183
Clearer error message.
2022-12-04 21:06:35 +00:00
bed22272e5
Supply default values for random uniform voltage sources.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12861
2022-12-04 21:06:35 +00:00
8ab8a48657
fix order of includes to avoid conflicts with a Windows header.
2022-12-03 10:59:46 +01:00
bd235048f9
sim GUI: remove "Adjust value" checkbox.
...
We had a change in notation and this checkbox became useless.
2022-12-03 08:28:43 +00:00
6e45987005
fix build warning
2022-12-01 20:33:51 +00:00
f38c5d8cd0
Sim: Add virtual destructor to SIM_SERDE
2022-12-01 17:18:55 +01:00
4ec7ea376e
Sim Ibis: Minor code style changes
2022-12-01 17:13:37 +01:00
0f09172902
Eeschema: ibis_parser - Fix undefined behavior due to pointer aliasing in isNumberNA
2022-12-01 15:44:38 +00:00
d2adcdfde0
Sim: Add "number of bits" parameter to KIBIS PRBS model and some more fixes
...
The other fixes:
- PRBS's `m_bits` should be an integer.
- Fix some references to outdated parameter names.
2022-12-01 09:19:41 +01:00
7d207c5d2f
Sim Ibis: Change some strings for consistency
2022-11-30 17:38:09 +01:00
e39c0b20ea
Sim: Universally initialize enum parameters with their default values
2022-11-30 12:45:59 +01:00
39cd9f8980
Sim: Fix Sim.Params field generation logic
...
Don't generate the first parameter (e.g. for KIBIS it was 'vcc=""') when
it is empty in models without primary value.
2022-11-30 12:45:58 +01:00
f3aff63726
Fix minor compil warnings
2022-11-29 20:05:58 +01:00
ab6caca384
Sim: Remove duplicate parameters
2022-11-29 15:02:45 +01:00
b025b103de
Sim Model Editor: Make the VBIC model the first BJT model to select
2022-11-29 10:13:20 +01:00
8143522371
Sim: Fix VDMOS model parsing
2022-11-29 09:48:01 +01:00
6510afe699
Ibis: Show the parser log if the parser fails
2022-11-28 17:46:42 +00:00
20ea191f66
Sim: Fix model param vs. instance param duplicates in diode model
2022-11-28 08:00:49 +01:00
7b1a460649
Sim: Fix unhandled MODEL_TYPE in SIM_MODEL_NGSPICE
2022-11-28 07:59:24 +01:00
d836fbaaaa
Sim: Add VBIC model support
...
Update generate_sim_model_ngspice_data.bash a little, but it's still
outdated.
2022-11-28 04:45:36 +01:00
bbcb0c04fc
Sim: Don't crash when parsing unknown model in a Spice file
2022-11-27 08:59:54 +01:00
71d194071b
Sim: Allow Numparam expressions in models inside subckts
...
Global-level numparam expressions are not properly supported yet.
Fixes https://gitlab.com/kicad/code/kicad/issues/12953
2022-11-27 06:32:17 +01:00
0b5814f98f
Sim: Allow .subckt parameter lists without "params:"
...
And fix .subckt parameter list parsing, because it was broken.
Fixes https://gitlab.com/kicad/code/kicad/issues/12779
2022-11-26 10:24:11 +01:00
6f630f7054
Sim: Make library path textbox editable
...
Load the library from the path if enter is pressed or focus is lost if
the library exists. If a library under the same path as previously is
to be loaded this way, don't do anything.
Fixes https://gitlab.com/kicad/code/kicad/issues/12970
2022-11-26 03:55:20 +01:00
acc760dc25
Sim: Fix generation of Sim.Pins field in multipart models
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12372
2022-11-26 01:34:10 +01:00
6d5cc9e606
Sim: Sort the generated Sim.Pins by symbol pin numbers
...
They were sorted by model pin numbers, which weren't the keys in the
key=value pairs generated into Sim.Pins.
2022-11-26 01:34:10 +01:00
a65b35107d
Sim: Make Sim.Pins have key-value pairs instead of a sequence
...
Moreover, upgrade models on schematic load instead of on model load
2022-11-25 05:38:21 +01:00
226dc9de78
Ibis: Don't create unnecessary B source
2022-11-22 21:09:08 +00:00
5d4b323009
Ibis : correct net name for device generation
2022-11-22 21:08:26 +00:00
b0b8a8dd67
Fix the order of some includes to avoid a conflict with a Windows header
2022-11-22 07:33:14 +01:00
23480cdee3
Sim: Make empty Sim.Params mean storing primary value in Value
2022-11-22 07:09:52 +01:00
1550a1e3a4
Sim Model Editor: Add "Save {} in Value field as "{}"" checkbox
2022-11-22 07:09:52 +01:00
d63eac9778
Sim: s/SIM_MODEL_MUTUAL_INDUCTOR/SIM_MODEL_L_MUTUAL/
2022-11-21 05:01:12 +01:00
e9fe59a28c
Sim: Rename the missed Sim_* fields to Sim.*
2022-11-21 03:33:11 +01:00
6969362813
Sim Model Editor: Don't provide library-only models as builtins
2022-11-20 22:07:39 +01:00
8498630876
Ibis: correctly load QA files up to v2.1
2022-11-20 19:10:46 +00:00
59501dfa15
Sim: Rename Ibis_* fields to Sim.Ibis.*
2022-11-20 03:53:10 +01:00
059ca8fc48
Sim: Rename Sim_* fields to Sim.*
2022-11-20 03:37:54 +01:00
9b6f7d5db7
Sim Model Editor: Use SIM_LIB_MGR class to manage library models
2022-11-19 01:55:38 +01:00
21ae2dd1c0
Sim Model Editor: Initialize all IBIS models as IBIS devices
2022-11-19 01:55:38 +01:00
e09e521162
Remove GUI calls from netlisting.
2022-11-18 15:29:16 +00:00
0f4cc2450d
Sim Model Editor: Don't throw an error on opening a NONE model
2022-11-18 09:06:55 +01:00
e7c43ca20a
Sim: Remove inference from Reference and Value
2022-11-18 08:39:15 +01:00
b9ac486000
simulator: remove unused includes, and reorder a few includes to fix conflicts
...
Conflicts happen only on msys2 with wxWidgets 3.0. But this minor reorder
allows me to test Kicad compilation with "old" wxWidgets, used on Linux.
2022-11-16 10:09:54 +01:00
ce3362ee12
Sim: Don't write inherited model params to symbol fields
2022-11-12 23:50:11 +01:00
d66d810edc
Sim Model Editor: Use SIM_LIB_MGR to store instance models
2022-11-12 23:27:22 +01:00
7c9f3981ef
Revert "Reorder includes is some simulator files to fix issues on msys2 (no code change)"
...
This reverts commit 78e45fa1b9
2022-11-12 20:47:36 +01:00
78e45fa1b9
Reorder includes is some simulator files to fix issues on msys2 (no code change)
...
Due to pegtl.hpp included in some files, reordering include fix some conflicts:
wxWidgets files must be included before pegtl.hpp, to compile with wxWidgets 3.0
I sometimes use wxWidgets 3.0 for debugging purposes.
2022-11-12 19:54:26 +01:00
0d42003247
Sim: Create missing SIM_MODEL factories in SIM_LIB_MGR
2022-11-12 18:20:56 +01:00
0d78ca8b1a
Ibis: GUI fixes
2022-11-12 14:39:36 +00:00
fef6eaa8ba
Sim Model Editor: Don't use shared_ptr to hack around lifetimes
2022-11-12 03:15:27 +01:00
95b6cc80f5
Sim: PULSE source y2 param is "Pulsed value", not "Initial value"
2022-11-11 05:19:53 +01:00
f33cd3e383
Sim: Remove vestiges of (de)serialization from SIM_MODEL
2022-11-11 05:17:26 +01:00
490069c5e6
Move (de)serialization of models into fields to new SIM_SERDE class
2022-11-11 03:08:32 +01:00
ffd578ef70
Ibis parser: fix a collision name with a windows header (msys2 specific)
...
This is recurrent conflict. (fixed by changing INPUT to INPUT_SDT).
2022-11-08 17:35:57 +01:00
ece752d5a2
Move annotation error reporting to preflight before simulation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9220
2022-11-08 12:13:15 +00:00
5af506777c
Formatting and wxT
2022-11-08 12:13:15 +00:00
e8762da4f4
Revert "Support for variable references in SPICE models."
...
This reverts commit 95ebfeeed1672ce650a9
2022-11-07 19:37:40 +01:00
95ebfeeed1
Support for variable references in SPICE models.
...
Also fixes a couple of bugs where sheet instance data wasn't being
handled correctly.
2022-11-07 10:57:34 +00:00
c279a2e696
Hotfix build when KICAD_SPICE=OFF
2022-11-02 11:03:09 +05:00
9eef638f0b
Don't validate on keystrokes.
...
KiCad policy is to validate on focus-loss so that you can make changes
which have intermediate states that are not valid.
2022-10-31 14:09:30 +00:00
5eca8dd8de
Undo hardcoding swapping of diode pins
...
Revert commits d1e2acd370b4d1aacff508fb
2022-10-30 11:01:59 +01:00
50d2237f06
command_export_pcb_dxf.cpp: switch to "C" locale before exporting the file
...
Fix also a minor Coverity warning
2022-10-29 09:45:45 +02:00
d1e2acd3d8
Sim: Reverse Cathode and Anode strings in diode model data
2022-10-28 15:16:34 +02:00
70b4d1aac8
Commit sim_model_diode.{cpp,h}
2022-10-28 14:29:32 +02:00
cff508fb3b
Sim: Reverse diode model pin order to match diode symbols
2022-10-28 14:01:09 +02:00
20ffb7d334
Sim: Don't throw exception for certain garbage characters in Value field
2022-10-27 06:42:43 +02:00
a9a2cc3e84
Enhance readability of Simulation Model dialog.
2022-10-27 00:01:38 +01:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
aa0e3666d1
Sim: Skip param name when writing primary param in model's Value field
2022-10-26 09:03:02 +02:00
01c69f1066
Sim: Swap pins instead of inverting position variable in potentiometers
2022-10-26 03:57:53 +02:00
Jeff Young
jean-pierre charras
Marek Roszko
Fabien Corona
aris-kimi
Graham Keeth
Alex
Seth Hillbrand
Wayne Stambaugh
Stefan Brüns
Jon Evans
Mikolaj Wielgus
kliment