/***********************************************************/ /* wxPcbStruct.h */ /***********************************************************/ #ifndef WXPCB_STRUCT_H #define WXPCB_STRUCT_H #include "wxstruct.h" #include "base_struct.h" #ifndef PCB_INTERNAL_UNIT #define PCB_INTERNAL_UNIT 10000 #endif /* Forward declarations of classes. */ class PCB_SCREEN; class WinEDA_Toolbar; class WinEDA_ModuleEditFrame; class BOARD; class TEXTE_PCB; class MODULE; class TRACK; class SEGZONE; class SEGVIA; class D_PAD; class TEXTE_MODULE; class MIREPCB; class COTATION; class EDGE_MODULE; class WinEDA3D_DrawFrame; class DRC; class ZONE_CONTAINER; class DRAWSEGMENT; class GENERAL_COLLECTOR; class GENERAL_COLLECTORS_GUIDE; class PCB_LAYER_WIDGET; /** * @info see also class WinEDA_BasePcbFrame: Basic class for pcbnew and *gerbview */ /*****************************************************/ /* class WinEDA_PcbFrame: the main frame for Pcbnew */ /*****************************************************/ class WinEDA_PcbFrame : public WinEDA_BasePcbFrame { friend class PCB_LAYER_WIDGET; protected: PCB_LAYER_WIDGET* m_Layers; DRC* m_drc; ///< the DRC controller, see drc.cpp // we'll use lower case function names for private member functions. void createPopUpMenuForZones( ZONE_CONTAINER* edge_zone, wxMenu* aPopMenu ); void createPopUpMenuForFootprints( MODULE* aModule, wxMenu* aPopMenu ); void createPopUpMenuForFpTexts( TEXTE_MODULE* aText, wxMenu* aPopMenu ); void createPopUpMenuForFpPads( D_PAD* aPad, wxMenu* aPopMenu ); void createPopupMenuForTracks( TRACK* aTrack, wxMenu* aPopMenu ); void createPopUpMenuForTexts( TEXTE_PCB* Text, wxMenu* menu ); void createPopUpBlockMenu( wxMenu* menu ); void createPopUpMenuForMarkers( MARKER_PCB* aMarker, wxMenu* aPopMenu ); /** * Function setActiveLayer * will change the currently active layer to \a aLayer and also * update the PCB_LAYER_WIDGET. */ void setActiveLayer( int aLayer, bool doLayerWidgetUpdate = true ) { ( (PCB_SCREEN*) GetScreen() )->m_Active_Layer = aLayer; if( doLayerWidgetUpdate ) syncLayerWidget(); } /** * Function getActiveLayer * returns the active layer */ int getActiveLayer() { return ( (PCB_SCREEN*) GetScreen() )->m_Active_Layer; } /** * Function syncLayerWidget * updates the currently "selected" layer within the PCB_LAYER_WIDGET. * The currently active layer is defined by the return value of getActiveLayer(). *

* This function cannot be inline without including layer_widget.h in * here and we do not want to do that. */ void syncLayerWidget( ); /** * Function syncLayerBox * updates the currently "selected" layer within m_SelLayerBox * The currently active layer, as defined by the return value of * getActiveLayer(). And updates the colored icon in the toolbar. */ void syncLayerBox(); public: WinEDAChoiceBox* m_SelLayerBox; // a combo box to display and // select active layer WinEDAChoiceBox* m_SelTrackWidthBox; // a combo box to display and // select current track width WinEDAChoiceBox* m_SelViaSizeBox; // a combo box to display and // select current via diameter wxTextCtrl* m_ClearanceBox; // a text ctrl to display the // current tracks and vias // clearance wxTextCtrl* m_NetClassSelectedBox; // a text ctrl to display the // current NetClass bool m_TrackAndViasSizesList_Changed; bool m_show_microwave_tools; bool m_show_layer_manager_tools; public: WinEDA_PcbFrame( wxWindow* father, const wxString& title, const wxPoint& pos, const wxSize& size, long style = KICAD_DEFAULT_DRAWFRAME_STYLE ); ~WinEDA_PcbFrame(); void OnQuit( wxCommandEvent & WXUNUSED(event) ); /** Function ToPlotter * Open a dialog frame to create plot and drill files * relative to the current board */ void ToPlotter( wxCommandEvent& event ); /** function ToPrinter * Install the print dialog */ void ToPrinter( wxCommandEvent& event ); void GetKicadAbout( wxCommandEvent& event ); /** Function IsGridVisible() , virtual * @return true if the grid must be shown */ virtual bool IsGridVisible(); /** Function SetGridVisibility() , virtual * It may be overloaded by derived classes * if you want to store/retrieve the grid visiblity in configuration. * @param aVisible = true if the grid must be shown */ virtual void SetGridVisibility(bool aVisible); /** Function GetGridColor() , virtual * @return the color of the grid */ virtual int GetGridColor(); /** Function SetGridColor() , virtual * @param aColor = the new color of the grid */ virtual void SetGridColor(int aColor); // Configurations: void InstallConfigFrame( const wxPoint& pos ); void Process_Config( wxCommandEvent& event ); void Update_config( wxWindow* displayframe ); /** Function Read_Config * Read the project configuration file * @param projectFileName = the config filename * if not found use kicad.pro * if not found : initialize default values * @return true if the current config is modified, false if no change */ bool Read_Config( const wxString& projectFileName ); void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct ); bool OnHotkeyDeleteItem( wxDC* DC, EDA_BaseStruct* DrawStruct ); void OnCloseWindow( wxCloseEvent& Event ); void Process_Special_Functions( wxCommandEvent& event ); void Tracks_and_Vias_Size_Event( wxCommandEvent& event ); void ProcessMuWaveFunctions( wxCommandEvent& event ); void MuWaveCommand( wxDC* DC, const wxPoint& MousePos ); void RedrawActiveWindow( wxDC* DC, bool EraseBg ); void ReCreateHToolbar(); void ReCreateAuxiliaryToolbar(); void ReCreateVToolbar(); void ReCreateAuxVToolbar(); void ReCreateOptToolbar(); void ReCreateMenuBar(); WinEDAChoiceBox* ReCreateLayerBox( WinEDA_Toolbar* parent ); /** * Function IsElementVisible * tests whether a given element category is visible. Keep this as an * inline function. * @param aPCB_VISIBLE is from the enum by the same name * @return bool - true if the element is visible. * @see enum PCB_VISIBLE */ bool IsElementVisible( int aPCB_VISIBLE ) { return GetBoard()->IsElementVisible( aPCB_VISIBLE ); } /** * Function SetElementVisibility * changes the visibility of an element category * @param aPCB_VISIBLE is from the enum by the same name * @param aNewState = The new visibility state of the element category * @see enum PCB_VISIBLE */ void SetElementVisibility( int aPCB_VISIBLE, bool aNewState ); /** * Function SetVisibleAlls * Set the status of all visible element categories and layers to VISIBLE */ void SetVisibleAlls( ); /** * Function ReFillLayerWidget * changes out all the layers in m_Layers and may be called upon * loading a new BOARD. */ void ReFillLayerWidget(); void Show3D_Frame( wxCommandEvent& event ); void GeneralControle( wxDC* DC, wxPoint Mouse ); /** function ShowDesignRulesEditor * Display the Design Rules Editor. */ void ShowDesignRulesEditor( wxCommandEvent& event ); /* toolbars update UI functions: */ void PrepareLayerIndicator(); /** * Function AuxiliaryToolBar_Update_UI * update the displayed values on auxiliary horizontal toolbar * (track width, via sizes, clearance ... */ void AuxiliaryToolBar_Update_UI(); /** * Function AuxiliaryToolBar_DesignRules_Update_UI * update the displayed values: track width, via sizes, clearance * used when a new netclass is selected */ void AuxiliaryToolBar_DesignRules_Update_UI(); /* mouse functions events: */ void OnLeftClick( wxDC* DC, const wxPoint& MousePos ); void OnLeftDClick( wxDC* DC, const wxPoint& MousePos ); /** * Function OnRightClick * populates a popup menu with the choices appropriate for the current *context. * The caller will add the ZOOM menu choices afterwards. * @param aMousePos The current mouse position * @param aPopMenu The menu to add to. */ bool OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu ); void OnSelectOptionToolbar( wxCommandEvent& event ); void ToolOnRightClick( wxCommandEvent& event ); /** Function SaveCopyInUndoList. * Creates a new entry in undo list of commands. * add a picker to handle aItemToCopy * @param aItemToCopy = the board item modified by the command to undo * @param aTypeCommand = command type (see enum UndoRedoOpType) * @param aTransformPoint = the reference point of the transformation, for *commands like move */ virtual void SaveCopyInUndoList( BOARD_ITEM* aItemToCopy, UndoRedoOpType aTypeCommand, const wxPoint& aTransformPoint = wxPoint( 0, 0 ) ); /** Function SaveCopyInUndoList (overloaded). * Creates a new entry in undo list of commands. * add a list of pickers to handle a list of items * @param aItemsList = the list of items modified by the command to undo * @param aTypeCommand = command type (see enum UndoRedoOpType) * @param aTransformPoint = the reference point of the transformation, for *commands like move */ virtual void SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList, UndoRedoOpType aTypeCommand, const wxPoint& aTransformPoint = wxPoint( 0, 0 ) ); /** Function PutDataInPreviousState() * Used in undo or redo command. * Put data pointed by List in the previous state, i.e. the state memorized * by List * @param aList = a PICKED_ITEMS_LIST pointer to the list of items to * undo/redo * @param aRedoCommand = a bool: true for redo, false for undo * @param aRebuildRatsnet = a bool: true to rebuild ratsnet (normal use), * false * to just retrieve las state (used in abort commands that do not need to * rebuild ratsnest) */ void PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand, bool aRebuildRatsnet = true ); /** Function GetBoardFromRedoList * Redo the last edition: * - Save the current board in Undo list * - Get an old version of the board from Redo list * @return none */ void GetBoardFromRedoList( wxCommandEvent& event ); /** Function GetBoardFromUndoList * Undo the last edition: * - Save the current board in Redo list * - Get an old version of the board from Undo list * @return none */ void GetBoardFromUndoList( wxCommandEvent& event ); /* Block operations: */ int ReturnBlockCommand( int key ); void HandleBlockPlace( wxDC* DC ); int HandleBlockEnd( wxDC* DC ); /** * Function Block_SelectItems * Uses GetScreen()->m_BlockLocate * select items within the selected block. * selected items are put in the pick list * @param none */ void Block_SelectItems(); /** * Function Block_Delete * deletes all items within the selected block. * @param none */ void Block_Delete(); /** * Function Block_Rotate * Rotate all items within the selected block. * The rotation center is the center of the block * @param none */ void Block_Rotate(); /** * Function Block_Flip * Flip items within the selected block. * The flip center is the center of the block * @param none */ void Block_Flip(); /** * Function Block_Move * move all items within the selected block. * New location is determined by the current offset from the selected *block's original location. * @param none */ void Block_Move(); /** * Function Block_Mirror_X * mirrors all items within the currently selected block in the X axis. * @param none */ void Block_Mirror_X(); /** * Function Block_Duplicate * Duplicate all items within the selected block. * New location is determined by the current offset from the selected * block's original location. * @param none */ void Block_Duplicate(); void SetToolbars(); void Process_Settings( wxCommandEvent& event ); void InstallPcbOptionsFrame( int id ); void InstallDisplayOptionsDialog( wxCommandEvent& aEvent ); void InstallPcbGlobalDeleteFrame( const wxPoint& pos ); void GenModulesPosition( wxCommandEvent& event ); void GenModuleReport( wxCommandEvent& event ); void InstallDrillFrame( wxCommandEvent& event ); void ToPostProcess( wxCommandEvent& event ); void OnFileHistory( wxCommandEvent& event ); void Files_io( wxCommandEvent& event ); bool LoadOnePcbFile( const wxString& FileName, bool Append ); /** * Function ReadPcbFile * reads a board file .brd * @param Append if 0: a previously loaded board is deleted before loading * the file else all items of the board file are added to the * existing board */ int ReadPcbFile( FILE* File, bool Append ); bool SavePcbFile( const wxString& FileName ); int SavePcbFormatAscii( FILE* File ); bool WriteGeneralDescrPcb( FILE* File ); // BOARD handling /** function Clear_Pcb() * delete all and reinitialize the current board * @param aQuery = true to prompt user for confirmation, false to * initialize silently */ bool Clear_Pcb( bool aQuery ); // Drc control /* function GetDrcController * @return the DRC controller */ DRC* GetDrcController() { return m_drc; } /** * Function RecreateBOMFileFromBoard * Recreates a .cmp file from the current loaded board * this is the same as created by cvpcb. * can be used if this file is lost */ void RecreateCmpFileFromBoard( wxCommandEvent& aEvent ); /** * Function RecreateBOMFileFromBoard * Creates a BOM file from the current loaded board */ void RecreateBOMFileFromBoard( wxCommandEvent& aEvent ); void ExportToGenCAD( wxCommandEvent& event ); /** * Function ExporttoSPECCTRA * will export the current BOARD to a specctra dsn file. See * See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the * specification. */ void ExportToSpecctra( wxCommandEvent& event ); /** * Function ImportSpecctraSession * will import a specctra *.ses file and use it to relocate MODULEs and * to replace all vias and tracks in an existing and loaded BOARD. * See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the * specification. */ void ImportSpecctraSession( wxCommandEvent& event ); /** * Function ImportSpecctraDesign * will import a specctra *.dsn file and use it to replace an entire BOARD. * The new board will not have any graphics, only components, tracks and * vias. * See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the * specification. */ void ImportSpecctraDesign( wxCommandEvent& event ); /** * Function Access_to_External_Tool * Run an external tool (like freeroute ) */ void Access_to_External_Tool( wxCommandEvent& event ); MODULE* ListAndSelectModuleName(); /** Function ListNetsAndSelect * called by a command event * displays the sorted list of nets in a dialog frame * If a net is selected, it is highlighted */ void ListNetsAndSelect( wxCommandEvent& event ); void Swap_Layers( wxCommandEvent& event ); void Install_Test_DRC_Frame( wxDC* DC ); // Handling texts on the board void Rotate_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC ); TEXTE_PCB* Create_Texte_Pcb( wxDC* DC ); void Delete_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC ); void StartMoveTextePcb( TEXTE_PCB* TextePcb, wxDC* DC ); void Place_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC ); void InstallTextPCBOptionsFrame( TEXTE_PCB* TextPCB, wxDC* DC ); // Graphic Segments type DRAWSEGMENT void Start_Move_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC ); void Place_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC ); void InstallGraphicItemPropertiesDialog( DRAWSEGMENT* aItem, wxDC* aDC ); // Footprint edition (see also WinEDA_BasePcbFrame) void InstallModuleOptionsFrame( MODULE* Module, wxDC* DC ); void StartMove_Module( MODULE* module, wxDC* DC ); bool Delete_Module( MODULE* module, wxDC* DC, bool aAskBeforeDeleting ); void Change_Side_Module( MODULE* Module, wxDC* DC ); void InstallExchangeModuleFrame( MODULE* ExchangeModuleModule ); /** function Exchange_Module * Replaces OldModule by NewModule, using OldModule settings: * position, orientation, pad netnames ...) * OldModule is deleted or put in undo list. * @param aOldModule = footprint to replace * @param aNewModule = footprint to put * @param aUndoPickList = the undo list used to save OldModule. If null, * OldModule is deleted */ void Exchange_Module( MODULE* aOldModule, MODULE* aNewModule, PICKED_ITEMS_LIST* aUndoPickList ); // loading modules: see WinEDA_BasePcbFrame // Board handling void RemoveStruct( BOARD_ITEM* Item, wxDC* DC ); // Highlight functions: int Select_High_Light( wxDC* DC ); void High_Light( wxDC* DC ); // Track and via edition: void Via_Edit_Control( wxCommandEvent& event ); /* Return true if a microvia can be put on board * A microvia is a small via restricted to 2 near neighbor layers * because its is hole is made by laser which can penetrate only one layer * It is mainly used to connect BGA to the first inner layer * And it is allowed from an external layer to the first inner layer */ bool IsMicroViaAcceptable( void ); /** * Function Other_Layer_Route * operates in one of two ways. If argument track is NULL, then swap the * active layer between m_Route_Layer_TOP and m_Route_Layer_BOTTOM. If a * track is in progress (track is not NULL), and if DRC allows it, place * a via on the end of the current track, and then swap the current active * layer and start a new segment on the new layer. * @param track A TRACK* to append the via to or NULL. * @param DC A device context to draw on. * @return bool - true if the operation was successful, else false such as * the case where DRC would not allow a via. */ bool Other_Layer_Route( TRACK* track, wxDC* DC ); void Affiche_PadsNoConnect( wxDC* DC ); void Affiche_Status_Net( wxDC* DC ); TRACK* Delete_Segment( wxDC* DC, TRACK* Track ); void Delete_Track( wxDC* DC, TRACK* Track ); void Delete_net( wxDC* DC, TRACK* Track ); void Remove_One_Track( wxDC* DC, TRACK* pt_segm ); /** function Reset_All_Tracks_And_Vias_To_Netclass_Values * Reset all tracks width and/or vias diameters and drill * to their default Netclass value * @param aTrack : bool true to modify tracks * @param aVia : bool true to modify vias */ bool Reset_All_Tracks_And_Vias_To_Netclass_Values( bool aTrack, bool aVia ); /** function Change_Net_Tracks_And_Vias_Sizes * Reset all tracks width and vias diameters and drill * to their default Netclass value or current values * @param aNetcode : the netcode of the net to edit * @param aUseNetclassValue : bool. True to use netclass values, false to * use current values */ bool Change_Net_Tracks_And_Vias_Sizes( int aNetcode, bool aUseNetclassValue ); /** Function Edit_Track_Width * Modify a full track width (using DRC control). * a full track is the set of track segments between 2 ends: pads or a * point that has more than 2 segments ends connected * @param DC = the curred device context (can be NULL) * @param aTrackSegment = a segment or via on the track to change */ void Edit_Track_Width( wxDC* DC, TRACK* Track ); /** Function Edit_TrackSegm_Width * Modify one track segment width or one via diameter (using DRC control). * @param DC = the current device context (can be NULL) * @param aTrackItem = the track segment or via to modify */ void Edit_TrackSegm_Width( wxDC* DC, TRACK* segm ); TRACK* Begin_Route( TRACK* track, wxDC* DC ); void End_Route( TRACK* track, wxDC* DC ); void ExChange_Track_Layer( TRACK* pt_segm, wxDC* DC ); void Attribut_Segment( TRACK* track, wxDC* DC, bool Flag_On ); void Attribut_Track( TRACK* track, wxDC* DC, bool Flag_On ); void Attribut_net( wxDC* DC, int net_code, bool Flag_On ); void Start_MoveOneNodeOrSegment( TRACK* track, wxDC* DC, int command ); bool PlaceDraggedOrMovedTrackSegment( TRACK* Track, wxDC* DC ); bool MergeCollinearTracks( TRACK* track, wxDC* DC, int end ); void Start_DragTrackSegmentAndKeepSlope( TRACK* track, wxDC* DC ); void SwitchLayer( wxDC* DC, int layer ); bool Add_45_degrees_Segment( wxDC* DC ); bool Genere_Pad_Connexion( wxDC* DC, int layer ); /** function EraseRedundantTrack * Called after creating a track * Remove (if exists) the old track that have the same starting and the * same ending point as the new created track * (this is the redunding track) * @param aDC = the current device context (can be NULL) * @param aNewTrack = the new created track (a pointer to a segment of the * track list) * @param aNewTrackSegmentsCount = number of segments in this new track * @param aItemsListPicker = the list picker to use for an undo command * (can be NULL) */ int EraseRedundantTrack( wxDC* aDC, TRACK* aNewTrack, int aNewTrackSegmentsCount, PICKED_ITEMS_LIST* aItemsListPicker ); /** Function SetTrackSegmentWidth * Modify one track segment width or one via diameter (using DRC control). * Basic routine used by other routines when editing tracks or vias * @param aTrackItem = the track segment or via to modify * @param aItemsListPicker = the list picker to use for an undo command * (can be NULL) * @param aUseNetclassValue = true to use NetClass value, false to use * current designSettings value * @return true if done, false if no not change (because DRC error) */ bool SetTrackSegmentWidth( TRACK* aTrackItem, PICKED_ITEMS_LIST* aItemsListPicker, bool aUseNetclassValue ); // zone handling /** Function Delete_Zone_Fill * Remove the zone filling which include the segment aZone, or the zone * which have the given time stamp. A zone is a group of segments which * have the same TimeStamp * @param aZone = zone segment within the zone to delete. Can be NULL * @param aTimestamp = Timestamp for the zone to delete, used if aZone == * NULL */ void Delete_Zone_Fill( SEGZONE* Track, long aTimestamp = 0 ); /** Function Delete_LastCreatedCorner * Used only while creating a new zone outline * Remove and delete the current outline segment in progress * @return 0 if no corner in list, or corner number */ int Delete_LastCreatedCorner( wxDC* DC ); /** * Function Begin_Zone * initiates a zone edge creation process, * or terminates the current zone edge and creates a new zone edge stub */ int Begin_Zone( wxDC* DC ); /** * Function End_Zone * terminates (if no DRC error ) the zone edge creation process * @param DC = current Device Context * @return true if Ok, false if DRC error */ bool End_Zone( wxDC* DC ); /** Function Fill_Zone() * Calculate the zone filling for the outline zone_container * The zone outline is a frontier, and can be complex (with holes) * The filling starts from starting points like pads, tracks. * If exists the old filling is removed * @param zone_container = zone to fill * @param verbose = true to show error messages * @return error level (0 = no error) */ int Fill_Zone( ZONE_CONTAINER* zone_container, bool verbose = TRUE ); /** Function Fill_All_Zones() * Fill all zones on the board * The old fillings are removed * @param verbose = true to show error messages * @return error level (0 = no error) */ int Fill_All_Zones( bool verbose = TRUE ); /** * Function Add_Zone_Cutout * Add a cutout zone to a given zone outline * @param DC = current Device Context * @param zone_container = parent zone outline */ void Add_Zone_Cutout( wxDC* DC, ZONE_CONTAINER* zone_container ); /** * Function Add_Similar_Zone * Add a zone to a given zone outline. * if the zones are overlapping they will be merged * @param DC = current Device Context * @param zone_container = parent zone outline */ void Add_Similar_Zone( wxDC* DC, ZONE_CONTAINER* zone_container ); /** * Function Edit_Zone_Params * Edit params (layer, clearance, ...) for a zone outline */ void Edit_Zone_Params( wxDC* DC, ZONE_CONTAINER* zone_container ); /** * Function Start_Move_Zone_Corner * Prepares a move corner in a zone outline, * called from a move corner command (IsNewCorner = false), * or a create new cornet command (IsNewCorner = true ) */ void Start_Move_Zone_Corner( wxDC* DC, ZONE_CONTAINER* zone_container, int corner_id, bool IsNewCorner ); /** * Function Start_Move_Zone_Corner * Prepares a drag edge in an existing zone outline, */ void Start_Move_Zone_Drag_Outline_Edge( wxDC* DC, ZONE_CONTAINER* zone_container, int corner_id ); /** * Function End_Move_Zone_Corner_Or_Outlines * Terminates a move corner in a zone outline, or a move zone outlines * @param DC = current Device Context (can be NULL) * @param zone_container: the given zone */ void End_Move_Zone_Corner_Or_Outlines( wxDC* DC, ZONE_CONTAINER* zone_container ); /** * Function End_Move_Zone_Corner_Or_Outlines * Remove the currently selected corner in a zone outline * the .m_CornerSelection is used as corner selection */ void Remove_Zone_Corner( wxDC* DC, ZONE_CONTAINER* zone_container ); /** Function Delete_Zone * Remove the zone which include the segment aZone, or the zone which have * the given time stamp. A zone is a group of segments which have the * same TimeStamp * @param DC = current Device Context (can be NULL) * @param zone_container = zone to modify * the member .m_CornerSelection is used to find the outline to remove. * if the outline is the main outline, all the zone is removed * otherwise, the hole is deleted */ void Delete_Zone_Contour( wxDC* DC, ZONE_CONTAINER* zone_container ); /** * Function Start_Move_Zone_Outlines * Initialize parameters to move an existing zone outlines. * @param DC = current Device Context (can be NULL) * @param zone_container: the given zone to move */ void Start_Move_Zone_Outlines( wxDC* DC, ZONE_CONTAINER* zone_container ); // Target handling MIREPCB* Create_Mire( wxDC* DC ); void Delete_Mire( MIREPCB* MirePcb, wxDC* DC ); void StartMove_Mire( MIREPCB* MirePcb, wxDC* DC ); void Place_Mire( MIREPCB* MirePcb, wxDC* DC ); void InstallMireOptionsFrame( MIREPCB* MirePcb, wxDC* DC, const wxPoint& pos ); // Graphic segments type DRAWSEGMENT handling: DRAWSEGMENT* Begin_DrawSegment( DRAWSEGMENT* Segment, int shape, wxDC* DC ); void End_Edge( DRAWSEGMENT* Segment, wxDC* DC ); void Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC ); void Delete_Drawings_All_Layer( int aLayer ); // Dimension handling: void Install_Edit_Cotation( COTATION* Cotation, wxDC* DC, const wxPoint& pos ); COTATION* Begin_Cotation( COTATION* Cotation, wxDC* DC ); void Delete_Cotation( COTATION* Cotation, wxDC* DC ); // netlist handling: void InstallNetlistFrame( wxDC* DC, const wxPoint& pos ); // Autoplacement: void AutoPlace( wxCommandEvent& event ); /** function OnOrientFootprints * install the dialog box for the common Orient Footprints */ void OnOrientFootprints( void ); /** function ReOrientModules * Set the orientation of footprints * @param ModuleMask = mask (wildcard allowed) selection * @param Orient = new orientation * @param include_fixe = true to orient locked footprints */ void ReOrientModules( const wxString& ModuleMask, int Orient, bool include_fixe ); void FixeModule( MODULE* Module, bool Fixe ); void AutoMoveModulesOnPcb( bool PlaceModulesHorsPcb ); bool SetBoardBoundaryBoxFromEdgesOnly(); void AutoPlaceModule( MODULE* Module, int place_mode, wxDC* DC ); int RecherchePlacementModule( MODULE* Module, wxDC* DC ); void GenModuleOnBoard( MODULE* Module ); float Compute_Ratsnest_PlaceModule( wxDC* DC ); int GenPlaceBoard(); void DrawInfoPlace( wxDC* DC ); // Autorouting: int Solve( wxDC* DC, int two_sides ); void Reset_Noroutable( wxDC* DC ); void Autoroute( wxDC* DC, int mode ); void ReadAutoroutedTracks( wxDC* DC ); void GlobalRoute( wxDC* DC ); void Show_1_Ratsnest( EDA_BaseStruct* item, wxDC* DC ); void Clean_Pcb( wxDC* DC ); void InstallFindFrame( const wxPoint& pos, wxDC* DC ); /** * Function SendMessageToEESCHEMA * sends a message to the schematic editor so that it may move its cursor * to a part with the same reference as the objectToSync * @param objectToSync The object whose reference is used to synchronize * eeschema. */ void SendMessageToEESCHEMA( BOARD_ITEM* objectToSync ); /* Micro waves functions */ void Edit_Gap( wxDC* DC, MODULE* Module ); MODULE* Create_MuWaveBasicShape( const wxString& name, int pad_count ); MODULE* Create_MuWaveComponent( int shape_type ); MODULE* Create_MuWavePolygonShape(); void Begin_Self( wxDC* DC ); MODULE* Genere_Self( wxDC* DC ); /** * Load applications settings specific to the PCBNew. * * This overrides the base class WinEDA_BasePcbFrame::LoadSettings() to * handle settings specific common to the PCB layout application. It * calls down to the base class to load settings common to all PCB type * drawing frames. Please put your application settings for PCBNew here * to avoid having application settings loaded all over the place. */ virtual void LoadSettings(); /** * Save applications settings common to PCB draw frame objects. * * This overrides the base class WinEDA_BasePcbFrame::SaveSettings() to * save settings specific to the PCB layout application main window. It * calls down to the base class to save settings common to all PCB type * drawing frames. Please put your application settings for PCBNew here * to avoid having application settings saved all over the place. */ virtual void SaveSettings(); DECLARE_EVENT_TABLE() }; /*********************************************************/ /* class WinEDA_ModuleEditFrame: public WinEDA_DrawFrame */ /* Class for the footprint editor */ /*********************************************************/ class WinEDA_ModuleEditFrame : public WinEDA_BasePcbFrame { public: MODULE* CurrentModule; wxString m_CurrentLib; public: WinEDA_ModuleEditFrame( wxWindow* father, const wxString& title, const wxPoint& pos, const wxSize& size, long style = KICAD_DEFAULT_DRAWFRAME_STYLE ); ~WinEDA_ModuleEditFrame(); void InstallOptionsFrame( const wxPoint& pos ); void OnCloseWindow( wxCloseEvent& Event ); void Process_Special_Functions( wxCommandEvent& event ); void RedrawActiveWindow( wxDC* DC, bool EraseBg ); void ReCreateHToolbar(); void ReCreateVToolbar(); void ReCreateOptToolbar(); void ReCreateAuxiliaryToolbar(); void OnLeftClick( wxDC* DC, const wxPoint& MousePos ); void OnLeftDClick( wxDC* DC, const wxPoint& MousePos ); bool OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu ); void SetToolbars(); void ReCreateMenuBar(); void ToolOnRightClick( wxCommandEvent& event ); void OnSelectOptionToolbar( wxCommandEvent& event ); void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct ); void Show3D_Frame( wxCommandEvent& event ); void GeneralControle( wxDC* DC, wxPoint Mouse ); void LoadModuleFromBoard( wxCommandEvent& event ); /** function ToPrinter * Install the print dialog */ void ToPrinter( wxCommandEvent& event ); // BOARD handling /** function Clear_Pcb() * delete all and reinitialize the current board * @param aQuery = true to prompt user for confirmation, false to * initialize silently */ bool Clear_Pcb( bool aQuery ); /* handlers for block commands */ int ReturnBlockCommand( int key ); virtual void HandleBlockPlace( wxDC* DC ); virtual int HandleBlockEnd( wxDC* DC ); BOARD_ITEM* ModeditLocateAndDisplay( int aHotKeyCode = 0 ); /* Undo and redo functions */ public: /** Function SaveCopyInUndoList. * Creates a new entry in undo list of commands. * add a picker to handle aItemToCopy * @param aItem = the board item modified by the command to undo * @param aTypeCommand = command type (see enum UndoRedoOpType) * @param aTransformPoint = the reference point of the transformation, for * commands like move */ virtual void SaveCopyInUndoList( BOARD_ITEM* aItem, UndoRedoOpType aTypeCommand, const wxPoint& aTransformPoint = wxPoint( 0, 0 ) ); /** Function SaveCopyInUndoList (overloaded). * Creates a new entry in undo list of commands. * add a list of pickers to handle a list of items * @param aItemsList = the list of items modified by the command to undo * @param aTypeCommand = command type (see enum UndoRedoOpType) * @param aTransformPoint = the reference point of the transformation, for * commands like move */ virtual void SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList, UndoRedoOpType aTypeCommand, const wxPoint& aTransformPoint = wxPoint( 0, 0 ) ); private: void GetComponentFromUndoList( wxCommandEvent& event ); void GetComponentFromRedoList( wxCommandEvent& event ); public: // Footprint edition void Place_Ancre( MODULE* module ); void RemoveStruct( EDA_BaseStruct* Item ); void Transform( MODULE* module, int transform ); // loading Footprint MODULE* Import_Module( wxDC* DC ); void Export_Module( MODULE* ptmod, bool createlib ); void Load_Module_From_BOARD( MODULE* Module ); // functions to edit footprint edges /** * Function Edit_Edge_Width * changes the width of module perimeter lines, EDGE_MODULEs. * @param ModuleSegmentWidth (global) = new width * @param Edge = edge to edit, or NULL. If Edge == NULL change * the width of all the footprint's edges * @param DC = current Device Context */ void Edit_Edge_Width( EDGE_MODULE* Edge ); void Edit_Edge_Layer( EDGE_MODULE* Edge ); void Delete_Edge_Module( EDGE_MODULE* Edge ); EDGE_MODULE* Begin_Edge_Module( EDGE_MODULE* Edge, wxDC* DC, int type_edge ); void End_Edge_Module( EDGE_MODULE* Edge, wxDC* DC ); void Enter_Edge_Width( EDGE_MODULE* Edge, wxDC* DC ); void Start_Move_EdgeMod( EDGE_MODULE* drawitem, wxDC* DC ); void Place_EdgeMod( EDGE_MODULE* drawitem, wxDC* DC ); // handlers for libraries: void Delete_Module_In_Library( const wxString& libname ); int Create_Librairie( const wxString& LibName ); void Select_Active_Library(); DECLARE_EVENT_TABLE() }; #endif /* WXPCB_STRUCT_H */