# Seth Hillbrand <seth@kipro-pcb.com>, 2020, 2021.
# ZbeeGin <zbeegin@op.pl>, 2021.
# Axel Henriksson <axe.henriksson@gmail.com>, 2021, 2022.
# Allan Nordhøy <epost@anotheragency.no>, 2021.
# Richard Jonsson <richard_jonsson@hotmail.com>, 2021.
# Henrik Kauhanen <henrik@kauhanen.se>, 2022.
# Hanna Breisand <weblate.org@breisand.se>, 2022.
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-01-01 15:11-0800\n"
"PO-Revision-Date: 2022-12-20 15:47+0000\n"
"Last-Translator: Henrik Kauhanen <henrik@kauhanen.se>\n"
"Language-Team: Swedish <https://hosted.weblate.org/projects/kicad/master-"
"source/sv/>\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 4.15.1-dev\n"
"X-Poedit-KeywordsList: _\n"
"X-Poedit-Basepath: J:\\kicad-winbuilder-3.4\\src\\kicad\n"
"X-Poedit-SourceCharset: iso-8859-1\n"
"X-Poedit-SearchPath-0: eeschema\n"
"X-Poedit-SearchPath-1: common\n"
"X-Poedit-SearchPath-2: cvpcb\n"
"X-Poedit-SearchPath-3: kicad\n"
"X-Poedit-SearchPath-4: pcbnew\n"
#: 3d-viewer/3d_cache/3d_plugin_manager.cpp:58
msgid "All Files"
msgstr "Alla filer"
#: 3d-viewer/3d_canvas/board_adapter.cpp:312
msgid "Build board outline"
msgstr "Bygg mönsterkortes konturer"
#: 3d-viewer/3d_canvas/board_adapter.cpp:520
msgid "Create layers"
msgstr "Skapa lager"
#: 3d-viewer/3d_canvas/board_adapter.cpp:669
#: pcbnew/dialogs/dialog_footprint_checker.cpp:116
msgid "No footprint loaded."
msgstr "Inget fotavtryck laddat."
#: 3d-viewer/3d_canvas/board_adapter.cpp:685
msgid ""
"Footprint outline is missing or malformed. Run Footprint Checker for a full "
"analysis."
msgstr ""
"Fotavtryckskontur saknas eller är felformad. Kör Fotavtryckskontroll för en "
"fullständig analys."
#: 3d-viewer/3d_canvas/board_adapter.cpp:694
msgid "Board outline is missing or malformed. Run DRC for a full analysis."
msgstr ""
"Mönsterkortets kontur saknas/är felaktig. Kör DRC för en fullständig analys."
#: 3d-viewer/3d_canvas/create_layer_items.cpp:226
msgid "Create tracks and vias"
msgstr "Skapa ledare och vior"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:673
msgid "Create zones"
msgstr "Skapa zoner"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:740
msgid "Simplifying copper layers polygons"
msgstr "Förenklar polygoner av kopparlager"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:749
msgid "Simplifying polygons on F_Cu"
msgstr "Förenklar polygoner på F_Cu"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:760
msgid "Simplifying polygons on B_Cu"
msgstr "Förenklar polygoner på B_Cu"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:790
#, c-format
msgid "Simplifying %d copper layers"
msgstr "Förenklar %d kopparlager"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:830
msgid "Simplify holes contours"
msgstr "Förenklar hålkonturer"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:859
msgid "Build Tech layers"
msgstr "Bygg tekniska lager"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:898
#, c-format
msgid "Build Tech layer %d"
msgstr "Bygg tekniskt lager %d"
#: 3d-viewer/3d_canvas/create_layer_items.cpp:1058
msgid "Build BVH for holes and vias"
msgstr "Bygg omslutande volym-hierarki för hål och vior"
#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:411
msgid "Your OpenGL version is not supported. Minimum required is 1.5."
msgstr "Din OpenGL-version stöds inte. Minimumkravet är 1,5."
#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:547
#, c-format
msgid "Last render time %.0f ms"
msgstr "Senaste renderingstid %.0f ms"
#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:654
#, c-format
msgid "Net %s\tNet class %s"
msgstr "Nät %s\tNätklass %s"
#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:678
#, c-format
msgid "Pad %s\t"
msgstr "Lödyta %s\t"
#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:709
#, c-format
msgid "Rule area %s\t"
msgstr "Regelområde %s\t"
#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:711
#, c-format
msgid "Zone %s\t"
msgstr "Zon %s\t"
#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:464
msgid "Load OpenGL: board"
msgstr "Ladda OpenGL: mönsterkort"
#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:497
msgid "Load OpenGL: holes and vias"
msgstr "Ladda OpenGL: hål och vior"
#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:565
msgid "Load OpenGL: layers"
msgstr "Ladda OpenGL: lager"
#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:578
#, c-format
msgid "Load OpenGL layer %d"
msgstr "Ladda OpenGL lager %d"
#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:677
#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:791
#: pcbnew/plugins/altium/altium_pcb.cpp:1600
msgid "Loading 3D models..."
msgstr "Laddar 3D-modeller..."
#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:686
#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:949
#, c-format
msgid "Reload time %.3f s"
msgstr "Omladdningstid %.3f s"
#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:955
#: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:440
#: eeschema/sch_plugins/kicad/sch_sexpr_plugin.cpp:303
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:284
#: eeschema/symbol_library.cpp:491 pcbnew/plugins/eagle/eagle_plugin.cpp:383
#: pcbnew/plugins/fabmaster/fabmaster_plugin.cpp:75
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2372
#: pcbnew/plugins/legacy/legacy_plugin.cpp:440
#, c-format
msgid "Loading %s..."
msgstr "Läser in %s..."
#: 3d-viewer/3d_rendering/opengl/render_3d_opengl.cpp:561
#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:175
msgid "Loading..."
msgstr "Läser in..."
#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:387
msgid "Load Raytracing: board"
msgstr "Ladda Raytracing: mönsterkort"
#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:558
msgid "Load Raytracing: layers"
msgstr "Ladda Raytracing: lager"
#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:340
#, c-format
msgid "Rendering time %.3f s"
msgstr "Renderingstid %.3f s"
#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:394
#, c-format
msgid "Rendering: %.0f %%"
msgstr "Renderar: %.0f %%"
#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:842
#, fuzzy
msgid "Rendering: Post processing shader"
msgstr "Rendering: Efterbearbetar skuggning"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:50
msgid "Export Current View as PNG..."
msgstr "Exportera Aktuell Vy som PNG..."
#: 3d-viewer/3d_viewer/3d_menubar.cpp:55
msgid "Export Current View as JPEG..."
msgstr "Exportera Aktuell Vy som JPEG..."
#: 3d-viewer/3d_viewer/3d_menubar.cpp:61 common/eda_base_frame.cpp:1084
#: common/hotkey_store.cpp:76 common/tool/actions.cpp:590
#: pcbnew/footprint_viewer_frame.cpp:1133 pcbnew/pcb_base_frame.cpp:688
msgid "3D Viewer"
msgstr "3D-visare"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:69
msgid "Copy 3D Image"
msgstr "Kopiera 3D-bild"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:107
msgid "Raytracing"
msgstr "Strålföljning"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:112 common/tool/actions.cpp:626
#: cvpcb/menubar.cpp:74 eeschema/menubar.cpp:303
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:169
#: gerbview/menubar.cpp:227 kicad/menubar.cpp:202
#: pagelayout_editor/menubar.cpp:159 pcbnew/menubar_footprint_editor.cpp:242
#: pcbnew/menubar_pcb_editor.cpp:456
msgid "Preferences..."
msgstr "Inställningar..."
#: 3d-viewer/3d_viewer/3d_menubar.cpp:113 common/tool/actions.cpp:626
#: cvpcb/menubar.cpp:75 eeschema/menubar.cpp:304
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:170
#: gerbview/menubar.cpp:228 kicad/menubar.cpp:203
#: pagelayout_editor/menubar.cpp:160 pcbnew/menubar_footprint_editor.cpp:243
#: pcbnew/menubar_pcb_editor.cpp:457
msgid "Show preferences for all open tools"
msgstr "Visa inställningar för alla öppna verktyg"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:117
msgid "Reset to Default Settings"
msgstr "Återställ Standardinställningar"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:133
msgid "3D Grid"
msgstr "3D Rutnät"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:146
#: bitmap2component/bitmap2cmp_gui.cpp:236 cvpcb/menubar.cpp:87
#: eeschema/menubar.cpp:314
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:180
#: eeschema/toolbars_symbol_viewer.cpp:135 gerbview/menubar.cpp:238
#: kicad/menubar.cpp:213 pagelayout_editor/menubar.cpp:169
#: pcbnew/menubar_footprint_editor.cpp:252 pcbnew/menubar_pcb_editor.cpp:467
#: pcbnew/toolbars_footprint_viewer.cpp:193
msgid "&File"
msgstr "&Arkiv"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:147 cvpcb/menubar.cpp:88
#: eeschema/menubar.cpp:315
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:181 kicad/menubar.cpp:214
#: pagelayout_editor/menubar.cpp:170 pcbnew/menubar_footprint_editor.cpp:253
#: pcbnew/menubar_pcb_editor.cpp:468
msgid "&Edit"
msgstr "&Redigera"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:148 eeschema/menubar.cpp:316
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:182
#: eeschema/toolbars_symbol_viewer.cpp:136 gerbview/menubar.cpp:239
#: kicad/menubar.cpp:215 pagelayout_editor/menubar.cpp:171
#: pcbnew/menubar_footprint_editor.cpp:254 pcbnew/menubar_pcb_editor.cpp:469
#: pcbnew/toolbars_footprint_viewer.cpp:194
msgid "&View"
msgstr "&Visa"
#: 3d-viewer/3d_viewer/3d_menubar.cpp:149 cvpcb/menubar.cpp:89
#: gerbview/menubar.cpp:241 kicad/menubar.cpp:217
msgid "&Preferences"
msgstr "&Inställningar"
#: 3d-viewer/3d_viewer/3d_toolbar.cpp:59
#: pcbnew/widgets/appearance_controls.cpp:2728
#, c-format
msgid "Viewports (%s+Tab):"
msgstr "Visningsytor (%s+Tab):"
#: 3d-viewer/3d_viewer/3d_toolbar.cpp:68
#: pcbnew/widgets/appearance_controls.cpp:2737
msgid "Save viewport..."
msgstr "Spara visningsyta..."
#: 3d-viewer/3d_viewer/3d_toolbar.cpp:69
#: pcbnew/widgets/appearance_controls.cpp:2738
msgid "Delete viewport..."
msgstr "Ta bort visningsyta..."
#: 3d-viewer/3d_viewer/3d_toolbar.cpp:71
#, c-format
msgid ""
"Save and restore view orientation and zoom.\n"
"Use %s+Tab to activate selector.\n"
"Successive Tabs while holding %s down will cycle through viewports in the "
"popup."
msgstr ""
"Spara och återställ visningens riktning och zoom.\n"
"Använd %s+Tab för att aktivera väljare.\n"
"Följande tryck på Tab medan %s hålls ner stegar genom visningsytorna i "
"popupmenyn."
#: 3d-viewer/3d_viewer/3d_toolbar.cpp:83
msgid "Reload board"
msgstr "Ladda om mönsterkort"
#: 3d-viewer/3d_viewer/3d_toolbar.cpp:88
msgid "Copy 3D image to clipboard"
msgstr "Kopiera 3D-bild till urklipp"
#: 3d-viewer/3d_viewer/3d_toolbar.cpp:93
msgid "Render current view using Raytracing"
msgstr "Rendera aktuell vy med strålföljning"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:101
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:73
msgid "KiCad 3D Viewer"
msgstr "KiCad 3D-visare"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:522
#: pcbnew/widgets/appearance_controls.cpp:2786
msgid "Viewport name:"
msgstr "Visningsytans namn:"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:522
#: pcbnew/widgets/appearance_controls.cpp:2786
msgid "Save Viewport"
msgstr "Spara visningsyta"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:561
#: pcbnew/widgets/appearance_controls.cpp:2825
msgid "Viewports"
msgstr "Visningsytor"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:570
#: pcbnew/widgets/appearance_controls.cpp:2834
msgid "Delete Viewport"
msgstr "Radera visningsyta"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:571
#: pcbnew/widgets/appearance_controls.cpp:2835
msgid "Select viewport:"
msgstr "Välj visningsyta:"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:773
msgid "3D Image File Name"
msgstr "Filnamn för 3D-Bild"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:794
#: common/eda_base_frame.cpp:1212 common/eda_base_frame.cpp:1216
#: pcbnew/plugins/altium/altium_pcb.cpp:1669
#, c-format
msgid "Insufficient permissions to save file '%s'."
msgstr "Otillräckliga behörigheter för att spara filen '%s'."
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:795 common/confirm.cpp:148
#: common/confirm.cpp:338 common/dialogs/panel_setup_severities.cpp:43
#: eeschema/files-io.cpp:843 eeschema/files-io.cpp:916
#: kicad/import_proj.cpp:153 kicad/import_project.cpp:102 kicad/kicad.cpp:313
#: kicad/tools/kicad_manager_control.cpp:172
#: kicad/tools/kicad_manager_control.cpp:238
#: kicad/tools/kicad_manager_control.cpp:284
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:166
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:179
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:191
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:203
#: pcbnew/pcb_marker.cpp:205
msgid "Error"
msgstr "Fel"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:828
msgid "Failed to copy image to clipboard"
msgstr "Misslyckades att kopiera bild till urklipp"
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:839
msgid "Can't save file"
msgstr "Kan inte spara fil"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:43
msgid "Center pivot rotation"
msgstr "Mittpunkt för rotation"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:43
msgid "Center pivot rotation (middle mouse click)"
msgstr "Mittpunkt för rotation (mittre musklick)"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:48
msgid "Rotate X Clockwise"
msgstr "Rotera X Medurs"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:53
msgid "Rotate X Counterclockwise"
msgstr "Rotera X Moturs"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:58
msgid "Rotate Y Clockwise"
msgstr "Rotera Y Medurs"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:63
msgid "Rotate Y Counterclockwise"
msgstr "Rotera Y Moturs"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:68
msgid "Rotate Z Clockwise"
msgstr "Rotera Z Medurs"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:73
msgid "Rotate Z Counterclockwise"
msgstr "Rotera Z Moturs"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:79
msgid "Move board Left"
msgstr "Flytta mönsterkortet åt vänster"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:85
msgid "Move board Right"
msgstr "Flytta mönsterkortet åt Höger"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:91
msgid "Move board Up"
msgstr "Flytta mönsterkortet uppåt"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:97
msgid "Move board Down"
msgstr "Flytta mönsterkortet neråt"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:103
msgid "Home view"
msgstr "Hemvy"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:109
msgid "Reset view"
msgstr "Återställ vy"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:115
msgid "Flip Board"
msgstr "Vänd Mönsterkortet"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:115
msgid "Flip the board view"
msgstr "Vänd mönsterkortsvyn"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:120
msgid "Toggle orthographic projection"
msgstr "Växla ortografisk projektion"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:120
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:205
msgid "Enable/disable orthographic projection"
msgstr "Aktivera/inaktivera ortografisk projektion"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:126
msgid "View Front"
msgstr "Visa Framsida"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:132
msgid "View Back"
msgstr "Visa Baksida"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:138
msgid "View Left"
msgstr "Visa vänster sida"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:144
msgid "View Right"
msgstr "Visa höger sida"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:150
msgid "View Top"
msgstr "Visa ovansidan"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:156
msgid "View Bottom"
msgstr "Visa undersidan"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:161
msgid "No 3D Grid"
msgstr "Inget 3D-Rutnät"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:166
msgid "3D Grid 10mm"
msgstr "3D-Rutnät 10mm"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:171
msgid "3D Grid 5mm"
msgstr "3D-Rutnät 5mm"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:176
msgid "3D Grid 2.5mm"
msgstr "3D-Rutnät 2,5mm"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:181
msgid "3D Grid 1mm"
msgstr "3D-Rutnät 1mm"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:187
msgid "Render Realistic Materials"
msgstr "Rendera Realistiska Material"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:188
msgid "Use all material properties from each 3D model file"
msgstr "Använd alla materialegenskaper från varje 3D-modellfil"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:194
msgid "Render Solid Colors"
msgstr "Rendera Solida Färger"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:195
msgid "Use only the diffuse color property from model 3D model file"
msgstr "Använd endast den diffusa färgegenskapen från modell 3D-modellfilen"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:201
msgid "Render CAD Colors"
msgstr "Rendera CAD-Färger"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:202
msgid "Use a CAD color style based on the diffuse color of the material"
msgstr "Använd en CAD-färgstil baserat på materialets diffusa färg"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:208
msgid "Toggle Through Hole 3D models"
msgstr "Växla Hålmonterade 3D-modeller"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:209
msgid "Toggle 3D models for 'Through hole' type components"
msgstr "Växla visning av 3D-modeller för hålmonterade komponenter"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:215
msgid "Toggle SMD 3D models"
msgstr "Växla Ytmonterade 3D-modeller"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:216
msgid "Toggle 3D models for 'Surface mount' type components"
msgstr "Växla visning av 3D-modeller för ytmonterade komponenter"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:222
msgid "Toggle unspecified 3D models"
msgstr "Växla ospecificerade 3D-modeller"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:222
msgid "Toggle 3D models for 'unspecified' type components"
msgstr "Växla visning av 3D-modeller för komponenter av 'ospecificerad' typ"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:228
msgid "Toggle 3D models not in pos file"
msgstr "Växla visning av 3D-modeller som inte är med i positionsfilen"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:233
msgid "Show Model Bounding Boxes"
msgstr "Visa modellgränslådor"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:238
msgid "Toggle realistic mode"
msgstr "Växla realistiskt läge"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:242
msgid "Toggle board body display"
msgstr "Växla visning av mönsterkortets basmaterial"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:246
msgid "Show 3D Axis"
msgstr "Visa 3D-axel"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:251
msgid "Toggle zone display"
msgstr "Växla zonvisning"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:255
msgid "Toggle adhesive display"
msgstr "Växla visning av lim"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:255
msgid "Toggle display of adhesive layers"
msgstr "Växla visning av limlager"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:259
msgid "Toggle silkscreen display"
msgstr "Växla visning av anvisningstryck"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:259
msgid "Toggle display of silkscreen layers"
msgstr "Växla visning av lager för anvisningstryck"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:263
msgid "Toggle solder mask display"
msgstr "Växla visning av lödmask"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:263
msgid "Toggle display of solder mask layers"
msgstr "Växla visning av lödmaskslager"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:267
msgid "Toggle solder paste display"
msgstr "Växla visning av lodpasta"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:267
msgid "Toggle display of solder paste layers"
msgstr "Växla visning av lager för lodpasta"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:271
msgid "Toggle comments display"
msgstr "Växla visning av kommentarer"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:271
msgid "Toggle display of comments and drawings layers"
msgstr "Växla visning av kommentars- och ritningslager"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:275
msgid "Toggle ECO display"
msgstr "Växla visning av ECO"
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:275
msgid "Toggle display of ECO layers"
msgstr ""
"Växla visning av ECO-lager för designanteckningar (Engineering Change Order)"
#: 3d-viewer/dialogs/dialog_select_3d_model.cpp:95
#, c-format
msgid "All supported files (%s)"
msgstr "Alla filformat som stöds (%s)"
#: 3d-viewer/dialogs/dialog_select_3d_model_base.cpp:58
msgid "Available paths:"
msgstr "Tillgängliga sökvägar:"
#: 3d-viewer/dialogs/dialog_select_3d_model_base.cpp:67
#: common/dialogs/dialog_configure_paths_base.h:61
msgid "Configure Paths"
msgstr "Konfigurera sökvägar"
#: 3d-viewer/dialogs/dialog_select_3d_model_base.h:63
msgid "Select 3D Model"
msgstr "Välj 3D-Modell"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:23
msgid "Environment Colors"
msgstr "Omgivningsfärger"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:30
msgid "Background gradient start:"
msgstr "Bakgrundsgradient början:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:37
msgid "Background gradient end:"
msgstr "Bakgrundsgradient slut:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:50
msgid "Solder paste:"
msgstr "Lodpasta:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:64
msgid "Board Colors"
msgstr "Mönsterkortsfärger"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:66
msgid "Use board stackup colors"
msgstr "Använd färger från mönsterkortets lageruppbyggnad"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:69
msgid "Use colors:"
msgstr "Använd färger:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:77
msgid "Silkscreen top:"
msgstr "Anvisningstryck ovansida:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:84
msgid "Silkscreen bottom:"
msgstr "Anvisningstryck undersida:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:97
msgid "Solder mask top:"
msgstr "Lödmask ovansida:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:104
msgid "Solder mask bottom:"
msgstr "Lödmask undersida:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:117
msgid "Copper/surface finish:"
msgstr "Koppar/oxidskydd:"
#: 3d-viewer/dialogs/panel_3D_colors_base.cpp:130
msgid "Board body:"
msgstr "Basmaterial:"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:24
msgid "Board Layers"
msgstr "Mönsterkortslager"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:31
msgid "Show silkscreen layers"
msgstr "Visa lager för anvisningstryck"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:34
msgid "Clip silkscreen at solder mask edges"
msgstr "Kapa anvisningstryck vid lödmaskens kanter"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:37
msgid "Clip silkscreen at via annuli"
msgstr "Kapa anvisningstryck vid via-kragar"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:40
msgid "Show solder mask layers"
msgstr "Visa lödmasklager"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:43
msgid "Show solder paste layers"
msgstr "Visa lodpastalager"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:46
msgid "Show adhesive layers"
msgstr "Visa lager för lim"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:56
msgid "User Layers (not shown in realistic mode)"
msgstr "Användarlager (visas inte i realistiskt läge)"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:58
msgid "Show comment and drawing layers"
msgstr "Visa kommentars- och ritningslager"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:61
msgid "Show ECO layers"
msgstr "Visa ECO-lager"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:74
msgid "Render Options"
msgstr "Renderingsalternativ"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:76
msgid "Realistic mode"
msgstr "Realistiskt läge"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:79
msgid "Show board body"
msgstr "Visa basmaterial"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:82
msgid "Show filled areas in zones"
msgstr "Visa fyllda kopparytor i zoner"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:85
msgid "Use bare copper color for unplated copper"
msgstr "Använd kopparfärg för opläterad koppar"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:86
msgid "Use different colors for plated and unplated copper. (Slow)"
msgstr "Använd olika färger för pläterad och opläterad koppar. (Långsamt)"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:93
msgid "Material properties:"
msgstr "Materialegenskaper:"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:97
msgid "Realistic"
msgstr "Realistiskt"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:97
msgid "Solid colors"
msgstr "Solida färger"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:97
msgid "CAD colors"
msgstr "CAD-färger"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:110
msgid "Camera Options"
msgstr "Kamera-alternativ"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:115
msgid "Rotation increment:"
msgstr "Rotationssteg:"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:123
#: pcb_calculator/widgets/unit_selector.cpp:130
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:303
#: pcbnew/dialogs/dialog_create_array_base.cpp:259
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:151
#: pcbnew/dialogs/dialog_move_exact_base.cpp:59
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:332
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:763
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1354
#: pcbnew/dialogs/panel_edit_options_base.cpp:61
msgid "deg"
msgstr "grader"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:133
msgid "Enable animation"
msgstr "Aktivera animering"
#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:140
msgid "Animation speed:"
msgstr "Animationshastighet:"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:23
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:21
msgid "Rendering Options"
msgstr "Renderingsalternativ"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:25
msgid "Show model bounding boxes"
msgstr "Visa gränsrutor för modell"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:28
msgid "Show copper and tech layers thickness (very slow)"
msgstr "Visa tjocklek på koppar och tekniska lager (mycket långsamt)"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:31
msgid "Highlight items on rollover"
msgstr "Markera objekt under markör"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:37
msgid "Anti-aliasing:"
msgstr "Kantutjämning:"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:41
msgid "Disabled"
msgstr "Deaktiverad"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:41
msgid "2x"
msgstr "2x"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:41
msgid "4x"
msgstr "4x"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:41
msgid "8x"
msgstr "8x"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:45
msgid "3D-Viewer must be closed and re-opened to apply this setting"
msgstr ""
"3D-Viewer måste stängas och öppnas igen för att tillämpa denna inställning"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:49
msgid "Selection color:"
msgstr "Urvalsfärg:"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:63
msgid "While Moving"
msgstr "Under Rörelse"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:65
msgid "Disable anti-aliasing"
msgstr "Inaktivera kantutjämning"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:68
msgid "Disable thickness"
msgstr "Inaktivera tjocklek"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:71
msgid "Disable vias"
msgstr "Inaktivera vior"
#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:74
msgid "Disable holes"
msgstr "Inaktivera hål"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:27
msgid "Procedural textures (slow)"
msgstr "Procedurella texturer (långsamt)"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:31
msgid "Add floor (slow)"
msgstr "Lägg till golv (långsamt)"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:35
msgid "Anti-aliasing (slow)"
msgstr "Kantutjämning (långsamt)"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:39
msgid ""
"Screen space ambient occlusions and global illumination reflections (slow)"
msgstr ""
"Globala belysningsreflektioner och omgivande ocklusion för skärmutrymme "
"(långsamt)"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:54
msgid "Number of Samples"
msgstr "Antal prover"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:58
msgid "Spread Factor %"
msgstr "Spridningsfaktor %"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:62
msgid "Recursion Level"
msgstr "Rekursionsnivå"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:66
msgid "Shadows:"
msgstr "Skuggor:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:71
msgid ""
"Number of rays that will be cast, into light direction, to evaluate a shadow "
"point"
msgstr ""
"Antal strålar som kommer att kastas i ljusriktning för att utvärdera en "
"skuggpunkt"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:81
msgid "Reflections:"
msgstr "Avspeglingar:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:86
msgid "Number of rays that will be cast to evaluate a reflection point"
msgstr ""
"Antal strålar som kommer att kastas för att utvärdera en reflektionspunkt"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:94
msgid ""
"Interactions number that a ray can travel through objects. (higher number of "
"levels improve results, specially on very transparent boards)"
msgstr ""
"Interaktionsnummer som en stråle kan färdas genom föremål. (högre antal "
"nivåer förbättrar resultaten, speciellt på mycket transparenta kort)"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:98
msgid "Refractions:"
msgstr "Brytningar:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:103
msgid "Number of rays that will be cast to evaluate a refraction point"
msgstr "Antal strålar som kommer att kastas för att utvärdera en brytpunkt"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:111
msgid "Number of bounces that a ray can hit reflective objects"
msgstr "Antal studsar som en stråle kan träffa reflekterande föremål"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:125
msgid "Lights Configuration"
msgstr "Ljuskonfiguration"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:130
msgid "Ambient camera light:"
msgstr "Omgivande kameraljus:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:142
msgid "Top light:"
msgstr "Övre ljus:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:154
msgid "Bottom light:"
msgstr "Nedre ljus:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:178
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:195
msgid "Elevation (deg)"
msgstr "Elevation (grader)"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:182
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:199
msgid "Azimuth (deg)"
msgstr "Azimut (grader)"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:203
msgid "Light 1:"
msgstr "Ljus 1:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:221
msgid "Light 5:"
msgstr "Ljus 5:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:236
msgid "Light 2:"
msgstr "Ljus 2:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:254
msgid "Light 6:"
msgstr "Ljus 6:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:269
msgid "Light 3:"
msgstr "Ljus 3:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:287
msgid "Light 7:"
msgstr "Ljus 7:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:302
msgid "Light 4:"
msgstr "Ljus 4:"
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:320
msgid "Light 8:"
msgstr "Ljus 8:"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:21
#: common/dialogs/dialog_print_generic_base.cpp:56 pcbnew/pcb_bitmap.cpp:234
msgid "Scale"
msgstr "Skala"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:29
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:74
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:119
#: common/dialogs/dialog_grid_settings_base.cpp:34
#: pagelayout_editor/dialogs/properties_frame_base.cpp:247
#: pagelayout_editor/dialogs/properties_frame_base.cpp:300
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:73
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:115
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:33
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:59
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:85
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:111
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:408
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1134
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1160
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1186
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1212
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1322
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:62
#: pcbnew/microwave/microwave_polygon.cpp:145
msgid "X:"
msgstr "X:"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:39
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:84
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:129
#: common/dialogs/dialog_grid_settings_base.cpp:45
#: pagelayout_editor/dialogs/properties_frame_base.cpp:258
#: pagelayout_editor/dialogs/properties_frame_base.cpp:311
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:88
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:126
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:44
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:70
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:96
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:122
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:72
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:309
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:369
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:419
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1145
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1171
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1197
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1223
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1333
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:83
#: pcbnew/microwave/microwave_polygon.cpp:154
msgid "Y:"
msgstr "Y:"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:49
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:94
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:139
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:328
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:340
msgid "Z:"
msgstr "Z:"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:66
#: gerbview/gerber_draw_item.cpp:688 pcbnew/footprint.cpp:1060
#: pcbnew/pad.cpp:1015
msgid "Rotation"
msgstr "Rotation"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:111
msgid "Offset"
msgstr "Förskjutning"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:156
msgid "Opacity"
msgstr "Opacitet"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:165
msgid "Board Thickness"
msgstr "Mönsterkortstjocklek"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:170
#: bitmap2component/bitmap2cmp_gui.cpp:152
#: common/dialogs/dialog_grid_settings_base.cpp:41
#: common/dialogs/dialog_grid_settings_base.cpp:52
#: common/dialogs/dialog_grid_settings_base.cpp:98
#: common/dialogs/dialog_grid_settings_base.cpp:109
#: common/eda_draw_frame.cpp:619
#: eeschema/dialogs/dialog_field_properties_base.cpp:219
#: eeschema/dialogs/dialog_field_properties_base.cpp:253
#: eeschema/dialogs/dialog_field_properties_base.cpp:264
#: eeschema/dialogs/dialog_label_properties_base.cpp:254
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:53
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:168
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:177
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:220
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:108
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:147
#: eeschema/dialogs/dialog_shape_properties_base.cpp:52
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:127
#: eeschema/dialogs/dialog_text_properties_base.cpp:186
#: eeschema/dialogs/dialog_text_properties_base.cpp:226
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:27
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:40
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:54
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:100
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:114
#: pagelayout_editor/dialogs/properties_frame_base.cpp:167
#: pagelayout_editor/dialogs/properties_frame_base.cpp:178
#: pagelayout_editor/dialogs/properties_frame_base.cpp:191
#: pagelayout_editor/dialogs/properties_frame_base.cpp:204
#: pagelayout_editor/dialogs/properties_frame_base.cpp:254
#: pagelayout_editor/dialogs/properties_frame_base.cpp:265
#: pagelayout_editor/dialogs/properties_frame_base.cpp:307
#: pagelayout_editor/dialogs/properties_frame_base.cpp:318
#: pagelayout_editor/dialogs/properties_frame_base.cpp:360
#: pagelayout_editor/dialogs/properties_frame_base.cpp:426
#: pagelayout_editor/dialogs/properties_frame_base.cpp:439
#: pagelayout_editor/dialogs/properties_frame_base.cpp:483
#: pagelayout_editor/dialogs/properties_frame_base.cpp:497
#: pagelayout_editor/dialogs/properties_frame_base.cpp:511
#: pagelayout_editor/dialogs/properties_frame_base.cpp:525
#: pagelayout_editor/dialogs/properties_frame_base.cpp:560
#: pagelayout_editor/dialogs/properties_frame_base.cpp:574
#: pagelayout_editor/dialogs/properties_frame_base.cpp:588
#: pagelayout_editor/dialogs/properties_frame_base.cpp:602
#: pagelayout_editor/pl_editor_frame.cpp:737
#: pcb_calculator/widgets/unit_selector.cpp:34
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:147
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:171
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:206
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:219
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:249
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:262
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:314
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:325
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:375
#: pcbnew/dialogs/dialog_create_array_base.cpp:55
#: pcbnew/dialogs/dialog_create_array_base.cpp:66
#: pcbnew/dialogs/dialog_create_array_base.cpp:77
#: pcbnew/dialogs/dialog_create_array_base.cpp:88
#: pcbnew/dialogs/dialog_create_array_base.cpp:223
#: pcbnew/dialogs/dialog_create_array_base.cpp:234
#: pcbnew/dialogs/dialog_create_array_base.cpp:246
#: pcbnew/dialogs/dialog_export_idf_base.cpp:48
#: pcbnew/dialogs/dialog_export_step_base.cpp:65
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:67
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
#: pcbnew/dialogs/dialog_move_exact_base.cpp:31
#: pcbnew/dialogs/dialog_move_exact_base.cpp:45
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:68
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:79
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:123
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:170
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:305
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:316
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:365
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:376
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:415
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:426
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:458
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:597
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:610
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:623
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:741
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:752
#: pcbnew/dialogs/dialog_plot_base.cpp:255
#: pcbnew/dialogs/dialog_plot_base.cpp:308
#: pcbnew/dialogs/dialog_position_relative_base.cpp:74
#: pcbnew/dialogs/dialog_position_relative_base.cpp:91
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:135
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:55
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:72
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:89
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:105
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:121
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:137
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:153
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:194
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:210
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:251
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:267
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:308
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:322
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:336
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:379
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:65
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:80
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:91
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:112
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:79
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:100
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:190
#: pcbnew/teardrop/dialog_teardrop_base.cpp:79
#: pcbnew/teardrop/dialog_teardrop_base.cpp:90
#: pcbnew/teardrop/dialog_teardrop_base.cpp:183
#: pcbnew/teardrop/dialog_teardrop_base.cpp:194
#: pcbnew/teardrop/dialog_teardrop_base.cpp:287
#: pcbnew/teardrop/dialog_teardrop_base.cpp:298
msgid "mm"
msgstr "mm"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:184
#: common/dialogs/dialog_page_settings_base.cpp:120
#: eeschema/dialogs/dialog_print_using_printer.cpp:280
#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:253
msgid "Preview"
msgstr "Förhandsgranskning"
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:234
msgid "Reload board and 3D models"
msgstr "Ladda om mönsterkort och 3D-modeller"
#: bitmap2component/bitmap2cmp_gui.cpp:152
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
msgid "Inch"
msgstr "Tum"
#: bitmap2component/bitmap2cmp_gui.cpp:152
msgid "DPI"
msgstr "DPI"
#: bitmap2component/bitmap2cmp_gui.cpp:218 common/tool/actions.cpp:61
msgid "Open..."
msgstr "Öppna..."
#: bitmap2component/bitmap2cmp_gui.cpp:219
msgid "Load source image"
msgstr "Ladda källbild"
#: bitmap2component/bitmap2cmp_gui.cpp:228 common/hotkey_store.cpp:57
#: common/tool/action_menu.cpp:226 common/tool/actions.cpp:114
msgid "Quit"
msgstr "Avsluta"
#: bitmap2component/bitmap2cmp_gui.cpp:229
msgid "Quit Image Converter"
msgstr "Avsluta bildkonverterare"
#: bitmap2component/bitmap2cmp_gui.cpp:374
#: eeschema/tools/sch_drawing_tools.cpp:586
#: pagelayout_editor/pl_editor_frame.cpp:845 pcbnew/tools/drawing_tool.cpp:665
msgid "Choose Image"
msgstr "Välj Bild"
#: bitmap2component/bitmap2cmp_gui.cpp:375
#: eeschema/tools/sch_drawing_tools.cpp:587
#: pagelayout_editor/pl_editor_frame.cpp:846 pcbnew/tools/drawing_tool.cpp:666
msgid "Image Files"
msgstr "Bildfiler"
#: bitmap2component/bitmap2cmp_gui.cpp:713
msgid "Unable to export to the Clipboard"
msgstr "Det gick inte att exportera till Urklipp"
#: bitmap2component/bitmap2cmp_gui.cpp:738
msgid "Create Logo File"
msgstr "Skapa logotypfil"
#: bitmap2component/bitmap2cmp_gui.cpp:755
#: bitmap2component/bitmap2cmp_gui.cpp:791
#: bitmap2component/bitmap2cmp_gui.cpp:826
#: bitmap2component/bitmap2cmp_gui.cpp:861
#, c-format
msgid "File '%s' could not be created."
msgstr "Filen '%s' kunde inte skapas."
#: bitmap2component/bitmap2cmp_gui.cpp:775
msgid "Create PostScript File"
msgstr "Skapa PostScript-Fil"
#: bitmap2component/bitmap2cmp_gui.cpp:811
msgid "Create Symbol Library"
msgstr "Skapa Symbolbibliotek"
#: bitmap2component/bitmap2cmp_gui.cpp:846
msgid "Create Footprint Library"
msgstr "Skapa fotavtrycksbibliotek"
#: bitmap2component/bitmap2cmp_gui.cpp:884
msgid "Error allocating memory for potrace bitmap"
msgstr "Fel vid tilldelning av minne för potrace-bitmapp"
#: bitmap2component/bitmap2cmp_gui.cpp:911
#: common/widgets/wx_html_report_panel_base.cpp:41
#: eeschema/dialogs/dialog_erc_base.cpp:127 gerbview/files.cpp:399
#: gerbview/readgerb.cpp:76
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1226
#: pcbnew/dialogs/dialog_drc_base.cpp:177
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:43
msgid "Errors"
msgstr "Fel"
#: bitmap2component/bitmap2cmp_gui_base.cpp:24
msgid "Original Picture"
msgstr "Originalbild"
#: bitmap2component/bitmap2cmp_gui_base.cpp:27
msgid "Greyscale Picture"
msgstr "Bild i Gråskala"
#: bitmap2component/bitmap2cmp_gui_base.cpp:30
msgid "Black && White Picture"
msgstr "Svartvit bild"
#: bitmap2component/bitmap2cmp_gui_base.cpp:38
msgid "Image Information"
msgstr "Bildinformation"
#: bitmap2component/bitmap2cmp_gui_base.cpp:47
msgid "Image size:"
msgstr "Bildstorlek:"
#: bitmap2component/bitmap2cmp_gui_base.cpp:51
#: bitmap2component/bitmap2cmp_gui_base.cpp:55
#: bitmap2component/bitmap2cmp_gui_base.cpp:67
#: bitmap2component/bitmap2cmp_gui_base.cpp:71
#: bitmap2component/bitmap2cmp_gui_base.cpp:83
msgid "0000"
msgstr "0000"
#: bitmap2component/bitmap2cmp_gui_base.cpp:59
msgid "pixels"
msgstr "bildpunkter"
#: bitmap2component/bitmap2cmp_gui_base.cpp:63
msgid "Image PPI:"
msgstr "Bildens PPI:"
#: bitmap2component/bitmap2cmp_gui_base.cpp:75
msgid "PPI"
msgstr "PPI"
#: bitmap2component/bitmap2cmp_gui_base.cpp:79
msgid "BPP:"
msgstr "BPP:"
#: bitmap2component/bitmap2cmp_gui_base.cpp:87
msgid "bits"
msgstr "bitar"
#: bitmap2component/bitmap2cmp_gui_base.cpp:100
msgid "Load Source Image"
msgstr "Ladda källbild"
#: bitmap2component/bitmap2cmp_gui_base.cpp:107
msgid "Output Size"
msgstr "Utmatningsstorlek"
#: bitmap2component/bitmap2cmp_gui_base.cpp:109
msgid "Lock height / width ratio"
msgstr "Lås höjd/bredd-förhållande"
#: bitmap2component/bitmap2cmp_gui_base.cpp:115
#: common/dialogs/dialog_page_settings_base.cpp:34
#: pcbnew/dialogs/dialog_target_properties_base.cpp:28
msgid "Size:"
msgstr "Storlek:"
#: bitmap2component/bitmap2cmp_gui_base.cpp:119
#: bitmap2component/bitmap2cmp_gui_base.cpp:124
msgid "300"
msgstr "300"
#: bitmap2component/bitmap2cmp_gui_base.cpp:143
#: common/dialogs/dialog_print_generic_base.cpp:24
#: eeschema/dialogs/dialog_annotate_base.cpp:92
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:49
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:25
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:52
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:102
#: include/lib_table_grid.h:191
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:197
#: pcbnew/dialogs/dialog_export_svg_base.cpp:79
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:51
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:26
#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:23
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:25
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:52
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:101
#: pcbnew/teardrop/dialog_teardrop_base.cpp:376
msgid "Options"
msgstr "Inställningar"
#: bitmap2component/bitmap2cmp_gui_base.cpp:145
msgid "Black / white threshold:"
msgstr "Svart/Vit tröskelvärde:"
#: bitmap2component/bitmap2cmp_gui_base.cpp:150
msgid ""
"Adjust the level to convert the greyscale picture to a black and white "
"picture."
msgstr "Justera nivån för att konvertera gråskalebilden till en svartvit bild."
#: bitmap2component/bitmap2cmp_gui_base.cpp:154
#: gerbview/gerber_file_image.cpp:338
msgid "Negative"
msgstr "Negativ"
#: bitmap2component/bitmap2cmp_gui_base.cpp:160
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:512
msgid "Front silk screen"
msgstr "Anvisningstryck framsida"
#: bitmap2component/bitmap2cmp_gui_base.cpp:160
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:518
msgid "Front solder mask"
msgstr "Lödmask framsida"
#: bitmap2component/bitmap2cmp_gui_base.cpp:160
msgid "User layer Eco1"
msgstr "Användarlager Eco1"
#: bitmap2component/bitmap2cmp_gui_base.cpp:160
msgid "User layer Eco2"
msgstr "Användarlager Eco2"
#: bitmap2component/bitmap2cmp_gui_base.cpp:162
msgid "Board Layer for Outline"
msgstr "Mönsterkortslager för Kortkant"
#: bitmap2component/bitmap2cmp_gui_base.cpp:164
msgid ""
"Choose the board layer to place the outline.\n"
"The reference designator and value are always placed on the silk screen "
"layer (but will be marked invisible)."
msgstr ""
"Välj mönsterkortslagret för att placera konturen.\n"
"Referensbeteckningen och värdet placeras alltid på anvisningstryckslagret "
"(men kommer att markeras som osynligt)."
#: bitmap2component/bitmap2cmp_gui_base.cpp:168
msgid "Symbol (.kicad_sym file)"
msgstr "Symbol (.kicad_sym fil)"
#: bitmap2component/bitmap2cmp_gui_base.cpp:168
msgid "Footprint (.kicad_mod file)"
msgstr "Fotavtryck (.kicad_mod fil)"
#: bitmap2component/bitmap2cmp_gui_base.cpp:168
msgid "Postscript (.ps file)"
msgstr "PostScript (.ps fil)"
#: bitmap2component/bitmap2cmp_gui_base.cpp:168
msgid "Drawing Sheet (.kicad_wks file)"
msgstr "Ritningsark (.kicad_wks fil)"
#: bitmap2component/bitmap2cmp_gui_base.cpp:170
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:44
msgid "Output Format"
msgstr "Utdataformat"
#: bitmap2component/bitmap2cmp_gui_base.cpp:174
msgid "Export to File"
msgstr "Exportera till Fil"
#: bitmap2component/bitmap2cmp_gui_base.cpp:177
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:145
msgid "Export to Clipboard"
msgstr "Exportera till Urklipp"
#: bitmap2component/bitmap2cmp_gui_base.h:96
#: kicad/tools/kicad_manager_actions.cpp:110
msgid "Image Converter"
msgstr "Bildkonverterare"
#: common/common.cpp:227
#, c-format
msgid ""
"Environment variables expansion failed: missing '%c' at position %u in '%s'."
msgstr ""
"Expansion av miljövariabler misslyckades: saknar '%c' vid position %u i '%s'."
#: common/common.cpp:308
#, c-format
msgid "Cannot make path '%s' absolute with respect to '%s'."
msgstr "Kan inte göra sökvägen '%s' absolut med avseende på '%s'."
#: common/common.cpp:327
#, c-format
msgid "Output directory '%s' created."
msgstr "Utmatningskatalogen '%s' skapades."
#: common/common.cpp:336
#, c-format
msgid "Cannot create output directory '%s'."
msgstr "Det går inte att skapa utmatningskatalogen '%s'."
#: common/common.cpp:608
msgid "This operating system is not supported by KiCad and its dependencies."
msgstr ""
"Det här operativsystemet stöds inte längre av KiCad och dess beroenden."
#: common/common.cpp:610
msgid "Unsupported Operating System"
msgstr "Operativsystemet stöds inte"
#: common/common.cpp:613
msgid ""
"Any issues with KiCad on this system cannot be reported to the official "
"bugtracker."
msgstr ""
"Problem med KiCad på det här systemet kan inte rapporteras till den "
"officiella felspåraren."
#: common/confirm.cpp:75
msgid "Do not show again"
msgstr "Visa inte igen"
#: common/confirm.cpp:145
msgid "Message"
msgstr "Meddelande"
#: common/confirm.cpp:146
msgid "Question"
msgstr "Fråga"
#: common/confirm.cpp:147 common/confirm.cpp:314
#: common/dialogs/panel_setup_severities.cpp:43
#: eeschema/dialogs/dialog_plot_schematic.cpp:453
#: eeschema/dialogs/dialog_plot_schematic.cpp:466
#: eeschema/dialogs/dialog_plot_schematic.cpp:488
#: eeschema/dialogs/dialog_sim_command.cpp:282
#: eeschema/dialogs/panel_eeschema_color_settings.cpp:146
#: eeschema/files-io.cpp:407 eeschema/sheet.cpp:641
#: eeschema/symbol_editor/symbol_editor.cpp:472
#: eeschema/symbol_editor/symbol_editor.cpp:743
#: eeschema/symbol_editor/symbol_editor.cpp:1180
#: pcbnew/dialogs/dialog_export_vrml.cpp:182
#: pcbnew/import_gfx/dialog_import_gfx.cpp:270 pcbnew/pcb_marker.cpp:202
#: pcbnew/plugins/kicad/pcb_parser.cpp:920
msgid "Warning"
msgstr "Varning"
#: common/confirm.cpp:178 common/confirm.cpp:184
msgid "File Open Warning"
msgstr "Filöppningsvarning"
#: common/confirm.cpp:180 common/confirm.cpp:186
msgid "Interleaved saves may produce very unexpected results."
msgstr "Sammanflätad sparning kan orsaka mycket oväntade resultat."
#: common/confirm.cpp:182 common/confirm.cpp:187 common/confirm.cpp:251
#: common/confirm.cpp:278 common/tool/actions.cpp:121
#: eeschema/dialogs/dialog_erc.cpp:391
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1381
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:168
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:66
#: pcbnew/dialogs/dialog_drc.cpp:298 pcbnew/plugins/kicad/pcb_parser.cpp:923
#: pcbnew/router/router_tool.cpp:571
msgid "Cancel"
msgstr "Avbryt"
#: common/confirm.cpp:182 common/confirm.cpp:187
msgid "Open Anyway"
msgstr "Öppna ändå"
#: common/confirm.cpp:198 common/confirm.cpp:235
msgid "Save Changes?"
msgstr "Spara Ändringar?"
#: common/confirm.cpp:200 common/confirm.cpp:237
msgid "If you don't save, all your changes will be permanently lost."
msgstr "Om du inte sparar förloras alla dina ändringar permanent."
#: common/confirm.cpp:202 common/confirm.cpp:238 common/tool/actions.cpp:67
#: eeschema/symbol_editor/symbol_editor.cpp:550
#: eeschema/widgets/tuner_slider_base.cpp:77
#: pcbnew/footprint_libraries_utils.cpp:1059
msgid "Save"
msgstr "Spara"
#: common/confirm.cpp:202 common/confirm.cpp:238
msgid "Discard Changes"
msgstr "Ignorera Ändringar"
#: common/confirm.cpp:205 common/confirm.cpp:284
msgid "Apply to all"
msgstr "Tillämpa på alla"
#: common/confirm.cpp:250
msgid "Your current changes will be permanently lost."
msgstr "Dina nuvarande ändringar kommer att förloras permanent."
#: common/confirm.cpp:251 common/tool/actions.cpp:91
msgid "Revert"
msgstr "Återställ"
#: common/confirm.cpp:277 eeschema/dialogs/dialog_symbol_fields_table.cpp:1380
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:164
#: pcbnew/router/router_tool.cpp:571
msgid "OK"
msgstr "OK"
#: common/confirm.cpp:366
msgid "Information"
msgstr "Information"
#: common/confirm.cpp:392 eeschema/symbol_editor/symbol_editor.cpp:340
#: eeschema/symbol_editor/symbol_editor.cpp:655
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:100
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:163
#: eeschema/tools/symbol_editor_pin_tool.cpp:239 kicad/import_project.cpp:88
#: kicad/tools/kicad_manager_control.cpp:265
#: pcbnew/dialogs/dialog_export_idf.cpp:162
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:121
#: pcbnew/dialogs/dialog_track_via_properties.cpp:479
#: pcbnew/footprint_libraries_utils.cpp:477
#: pcbnew/footprint_libraries_utils.cpp:1176 pcbnew/router/router_tool.cpp:1812
#: pcbnew/router/router_tool.cpp:2392 pcbnew/zone_filler.cpp:571
msgid "Confirmation"
msgstr "Bekräftelse"
#: common/confirm.cpp:395 eeschema/lib_field.cpp:534 eeschema/lib_pin.cpp:1150
#: eeschema/sch_field.cpp:766 eeschema/sch_pin.cpp:222
#: gerbview/gerber_draw_item.cpp:695 gerbview/gerber_draw_item.cpp:696
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44
#: pcbnew/fp_text.cpp:299 pcbnew/fp_text.cpp:304 pcbnew/fp_textbox.cpp:312
#: pcbnew/pcb_text.cpp:138 pcbnew/pcb_textbox.cpp:306
#: pcbnew/tools/drawing_stackup_table_tool.cpp:456
#: pcbnew/tools/drawing_stackup_table_tool.cpp:487
#: pcbnew/tools/drawing_stackup_table_tool.cpp:495
#: pcbnew/tools/drawing_stackup_table_tool.cpp:506
msgid "Yes"
msgstr "Ja"
#: common/confirm.cpp:395 eeschema/lib_field.cpp:534 eeschema/lib_pin.cpp:1150
#: eeschema/sch_field.cpp:766 eeschema/sch_pin.cpp:222
#: gerbview/gerber_draw_item.cpp:695 gerbview/gerber_draw_item.cpp:696
#: pcbnew/fp_text.cpp:299 pcbnew/fp_text.cpp:304 pcbnew/fp_textbox.cpp:312
#: pcbnew/pcb_text.cpp:138 pcbnew/pcb_textbox.cpp:306
#: pcbnew/tools/drawing_stackup_table_tool.cpp:456
#: pcbnew/tools/drawing_stackup_table_tool.cpp:487
#: pcbnew/tools/drawing_stackup_table_tool.cpp:495
#: pcbnew/tools/drawing_stackup_table_tool.cpp:505
msgid "No"
msgstr "Nej"
#: common/dialog_about/AboutDialog_main.cpp:115
#: common/widgets/widget_hotkey_list.cpp:474
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:53
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:103
#: eeschema/sch_symbol.cpp:1635 eeschema/sch_symbol.cpp:2112
#: eeschema/symbol_editor/symbol_editor.cpp:520
#: eeschema/symbol_editor/symbol_editor.cpp:1248
#: eeschema/symbol_viewer_frame.cpp:453 include/lib_table_grid.h:192
#: kicad/pcm/dialogs/panel_package_base.cpp:57
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:43
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:53
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:102
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:40
#: pcbnew/footprint.cpp:2881 pcbnew/footprint_libraries_utils.cpp:1027
#: pcbnew/footprint_libraries_utils.cpp:1344 pcbnew/plot_board_layers.cpp:101
msgid "Description"
msgstr "Beskrivning"
#: common/dialog_about/AboutDialog_main.cpp:119
msgid ""
"The KiCad EDA Suite is a set of open source applications for the creation of "
"electronic schematics and printed circuit boards."
msgstr ""
"KiCad EDA Suite är en uppsättning applikationer med öppen källkod för "
"skapande av elektroniska kretsscheman och mönsterkort."
#: common/dialog_about/AboutDialog_main.cpp:127
msgid "KiCad on the web"
msgstr "KiCad på internet"
#: common/dialog_about/AboutDialog_main.cpp:133
msgid "The official KiCad website - "
msgstr "Den officiella KiCad-webbplatsen - "
#: common/dialog_about/AboutDialog_main.cpp:137
msgid "Developer website - "
msgstr "Webbplats för utvecklare - "
#: common/dialog_about/AboutDialog_main.cpp:142
msgid "Official KiCad library repositories - "
msgstr "Officiella arkiv för KiCad-bibliotek - "
#: common/dialog_about/AboutDialog_main.cpp:149
msgid "Bug tracker"
msgstr "Felspårare"
#: common/dialog_about/AboutDialog_main.cpp:155
msgid "Report or examine bugs - "
msgstr "Rapportera eller undersök buggar - "
#: common/dialog_about/AboutDialog_main.cpp:161
msgid "KiCad users group and community"
msgstr "KiCad-användargrupp och community"
#: common/dialog_about/AboutDialog_main.cpp:166
msgid "KiCad forum - "
msgstr "KiCad forum - "
#: common/dialog_about/AboutDialog_main.cpp:180
msgid "The complete KiCad EDA Suite is released under the"
msgstr "Hela KiCad EDA Suite släpps under"
#: common/dialog_about/AboutDialog_main.cpp:182
msgid "GNU General Public License (GPL) version 3 or any later version"
msgstr "GNU General Public License (GPL) version 3 eller någon senare version"
#: common/dialog_about/AboutDialog_main.cpp:201
msgid "Lead Development Team"
msgstr "Ledande utvecklingsteam"
#: common/dialog_about/AboutDialog_main.cpp:202
msgid "Lead Development Alumni"
msgstr "Tidigare ledande utvecklare"
#: common/dialog_about/AboutDialog_main.cpp:203
msgid "Additional Contributions By"
msgstr "Ytterligare bidrag från"
#: common/dialog_about/AboutDialog_main.cpp:883
msgid "KiCad Librarian Team"
msgstr "KiCad-biblioteksgruppen"
#: common/dialog_about/AboutDialog_main.cpp:898
msgid "3D models by"
msgstr "3D-modeller av"
#: common/dialog_about/AboutDialog_main.cpp:910
msgid "Symbols by"
msgstr "Symboler av"
#: common/dialog_about/AboutDialog_main.cpp:917
msgid "Footprints by"
msgstr "Fotavtryck av"
#: common/dialog_about/AboutDialog_main.cpp:930
msgid "Icons by"
msgstr "Ikoner av"
#: common/dialog_about/dialog_about.cpp:98
#, c-format
msgid "About %s"
msgstr "Om %s"
#: common/dialog_about/dialog_about.cpp:127
#: common/dialog_about/dialog_about_base.h:58
msgid "About"
msgstr "Om"
#: common/dialog_about/dialog_about.cpp:132
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:87
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:90
msgid "Version"
msgstr "Version"
#: common/dialog_about/dialog_about.cpp:134
msgid "Developers"
msgstr "Utvecklare"
#: common/dialog_about/dialog_about.cpp:136
msgid "Doc Writers"
msgstr "Dokumentationsskribenter"
#: common/dialog_about/dialog_about.cpp:139
msgid "Librarians"
msgstr "Bibliotekarier"
#: common/dialog_about/dialog_about.cpp:142
msgid "Artists"
msgstr "Konstnärer"
#: common/dialog_about/dialog_about.cpp:144
msgid "Translators"
msgstr "Översättare"
#: common/dialog_about/dialog_about.cpp:146
msgid "Packagers"
msgstr "Förpackare"
#: common/dialog_about/dialog_about.cpp:149
msgid "License"
msgstr "Licens"
#: common/dialog_about/dialog_about.cpp:463
msgid "Could not open clipboard to write version information."
msgstr "Kunde inte öppna urklipp för att skriva versionsinformation."
#: common/dialog_about/dialog_about.cpp:464
msgid "Clipboard Error"
msgstr "Urklippsfel"
#: common/dialog_about/dialog_about.cpp:473
msgid "Copied..."
msgstr "Kopierad ..."
#: common/dialog_about/dialog_about_base.cpp:31
msgid "App Title"
msgstr "Appens titel"
#: common/dialog_about/dialog_about_base.cpp:37
msgid "Copyright Info"
msgstr "Copyright-information"
#: common/dialog_about/dialog_about_base.cpp:41
msgid "Build Version Info"
msgstr "Byggversions-info"
#: common/dialog_about/dialog_about_base.cpp:45
msgid "Lib Version Info"
msgstr "Biblioteksversions-info"
#: common/dialog_about/dialog_about_base.cpp:58
msgid "&Copy Version Info"
msgstr "&Kopiera Versionsinformation"
#: common/dialog_about/dialog_about_base.cpp:59
msgid "Copy KiCad version info to the clipboard"
msgstr "Kopiera KiCad versionsinformation till Urklipp"
#: common/dialog_about/dialog_about_base.cpp:63
msgid "&Report Bug"
msgstr "&Rapportera fel"
#: common/dialog_about/dialog_about_base.cpp:64 common/tool/actions.cpp:679
msgid "Report a problem with KiCad"
msgstr "Rapportera ett problem med KiCad"
#: common/dialog_about/dialog_about_base.cpp:68 common/tool/actions.cpp:673
msgid "Donate"
msgstr "Donera"
#: common/dialog_about/dialog_about_base.cpp:69
#: common/tool/common_control.cpp:278
msgid "Donate to KiCad"
msgstr "Donera till KiCad"
#: common/dialog_about/dialog_about_base.cpp:94 common/dialog_shim.cpp:665
msgid "&OK"
msgstr "&OK"
#: common/dialog_shim.cpp:666
msgid "&Cancel"
msgstr "&Avbryt"
#: common/dialog_shim.cpp:667
msgid "&Yes"
msgstr "&Ja"
#: common/dialog_shim.cpp:668
msgid "&No"
msgstr "&Nej"
#: common/dialog_shim.cpp:669
msgid "&Apply"
msgstr "&Verkställ"
#: common/dialog_shim.cpp:670
msgid "&Save"
msgstr "&Spara"
#: common/dialog_shim.cpp:671 common/dialog_shim.cpp:672
#: common/eda_base_frame.cpp:478
msgid "&Help"
msgstr "&Hjälp"
#: common/dialogs/dialog_HTML_reporter_base.h:48
msgid "Report"
msgstr "Rapportera"
#: common/dialogs/dialog_assign_netclass.cpp:104
msgid "<b>Currently matching nets:</b>"
msgstr "<b>Nu motsvarande nät:</b>"
#: common/dialogs/dialog_color_picker.cpp:94
msgid "Clear Color"
msgstr "Rensa färg"
#: common/dialogs/dialog_color_picker_base.cpp:31
msgid "RGB"
msgstr "RGB"
#: common/dialogs/dialog_color_picker_base.cpp:46
msgid "Red:"
msgstr "Röd:"
#: common/dialogs/dialog_color_picker_base.cpp:50
msgid "Green:"
msgstr "Grön:"
#: common/dialogs/dialog_color_picker_base.cpp:54
msgid "Blue:"
msgstr "Blå:"
#: common/dialogs/dialog_color_picker_base.cpp:74
msgid "HSV"
msgstr "HSV"
#: common/dialogs/dialog_color_picker_base.cpp:91
msgid "Hue:"
msgstr "Nyans:"
#: common/dialogs/dialog_color_picker_base.cpp:95
msgid "Saturation:"
msgstr "Mättnad:"
#: common/dialogs/dialog_color_picker_base.cpp:114
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:29
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:96
#: pcbnew/dialogs/dialog_text_properties.cpp:92
msgid "Value:"
msgstr "Värde:"
#: common/dialogs/dialog_color_picker_base.cpp:134
#: common/dialogs/dialog_color_picker_base.h:96
msgid "Color Picker"
msgstr "Färgväljare"
#: common/dialogs/dialog_color_picker_base.cpp:154
msgid "Defined Colors"
msgstr "Förvalda Färger"
#: common/dialogs/dialog_color_picker_base.cpp:163
msgid "Opacity:"
msgstr "Opacitet:"
#: common/dialogs/dialog_color_picker_base.cpp:185
msgid "Preview (old/new):"
msgstr "Förhandsgranska (gammal/ny):"
#: common/dialogs/dialog_color_picker_base.cpp:210
msgid "Reset to Default"
msgstr "Återställ till standard"
#: common/dialogs/dialog_configure_paths.cpp:188
#: common/dialogs/dialog_configure_paths.cpp:246
msgid "Environment variable name cannot be empty."
msgstr "Miljövariabelns namn kan inte utelämnas."
#: common/dialogs/dialog_configure_paths.cpp:196
#: common/dialogs/dialog_configure_paths.cpp:248
msgid "Environment variable path cannot be empty."
msgstr "Miljövariabelns sökväg kan inte vara tom."
#: common/dialogs/dialog_configure_paths.cpp:253
msgid "3D search path alias cannot be empty."
msgstr "3D-sökvägsalias kan inte utelämnas."
#: common/dialogs/dialog_configure_paths.cpp:255
msgid "3D search path cannot be empty."
msgstr "3D-sökväg kan inte vara tom."
#: common/dialogs/dialog_configure_paths.cpp:270
msgid ""
"This path was defined externally to the running process and\n"
"will only be temporarily overwritten."
msgstr ""
"Denna sökväg definierades externt för den pågående processen och\n"
"kommer bara att skrivas över tillfälligt."
#: common/dialogs/dialog_configure_paths.cpp:272
msgid ""
"The next time KiCad is launched, any paths that have already\n"
"been defined are honored and any settings defined in the path\n"
"configuration dialog are ignored. If you did not intend for\n"
"this behavior, either rename any conflicting entries or remove\n"
"the external environment variable(s) from your system."
msgstr ""
"Nästa gång KiCad startas, kommer alla redan definierade sökvägar\n"
"att respekteras och alla inställningar definierade i sökvägs-\n"
"konfigurationsdialogen att ignoreras. Om detta beteende inte \n"
"var din avsikt behöver du antingen döpa om alla motstridiga \n"
"poster, eller ta bort de externa miljövariablerna från ditt system."
#: common/dialogs/dialog_configure_paths.cpp:290
#, c-format
msgid "The name %s is reserved, and cannot be used."
msgstr "Namnet %s är reserverat och kan inte användas."
#: common/dialogs/dialog_configure_paths.cpp:394
msgid ""
"Enter the name and value for each environment variable. Grey entries are "
"names that have been defined externally at the system or user level. "
"Environment variables defined at the system or user level take precedence "
"over the ones defined in this table. This means the values in this table "
"are ignored."
msgstr ""
"Ange namn och värde för varje miljövariabel. Grå poster är namn som har "
"definierats externt på system- eller användarnivå. Miljövariabler som "
"definierats på system- eller användarnivå har företräde framför de som "
"definieras i denna tabell. Detta innebär att värdena i denna tabell "
"ignoreras."
#: common/dialogs/dialog_configure_paths.cpp:400
msgid ""
"To ensure environment variable names are valid on all platforms, the name "
"field will only accept upper case letters, digits, and the underscore "
"characters."
msgstr ""
"För att säkerställa att miljövariabelnamn är giltiga på alla plattformar, "
"accepterar namnfältet endast versaler, siffror och understrykningstecken."
#: common/dialogs/dialog_configure_paths_base.cpp:23
msgid "Environment Variables"
msgstr "Miljövariabler"
#: common/dialogs/dialog_configure_paths_base.cpp:39
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:80
#: eeschema/dialogs/dialog_label_properties_base.cpp:86
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:121
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:89
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:58
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:60
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:774
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:55
#: eeschema/dialogs/panel_sym_lib_table.cpp:310
#: eeschema/dialogs/panel_template_fieldnames_base.cpp:43
#: eeschema/fields_grid_table.cpp:338 eeschema/lib_pin.cpp:1145
#: eeschema/sch_pin.cpp:217 eeschema/sch_symbol.cpp:1599
#: eeschema/sch_symbol.cpp:1644 eeschema/symbol_editor/symbol_editor.cpp:1220
#: eeschema/symbol_viewer_frame.cpp:451
#: eeschema/widgets/tuner_slider_base.cpp:26
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:39
#: kicad/pcm/dialogs/panel_package_base.cpp:50
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:42
#: pcbnew/dialogs/dialog_net_inspector.cpp:964
#: pcbnew/dialogs/panel_fp_lib_table.cpp:465
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:38 pcbnew/zone.cpp:589
#: pcbnew/zone.cpp:1432
msgid "Name"
msgstr "Namn"
#: common/dialogs/dialog_configure_paths_base.cpp:40
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:41
msgid "Path"
msgstr "Sökväg"
#: common/dialogs/dialog_global_lib_table_config.cpp:39
#, c-format
msgid "Configure Global %s Library Table"
msgstr "Konfigurera global %sbibliotekstabell"
#: common/dialogs/dialog_global_lib_table_config.cpp:42
#, c-format
msgid ""
"KiCad has been run for the first time using the new %s library table for\n"
"accessing libraries. In order for KiCad to access %s libraries,\n"
"you must configure your global %s library table. Please select from one\n"
"of the options below. If you are not sure which option to select, please\n"
"use the default selection."
msgstr ""
"KiCad har körts för första gången med hjälp av den nya %sbibliotekstabellen "
"för\n"
"åtkomst till bibliotek. För att KiCad ska få åtkomst till %sbibliotek,\n"
"måste du konfigurera din globala bibliotekstabell för %s. Välj bland ett\n"
"av alternativen nedan. Om du inte är säker på vilket alternativ du ska "
"välja,\n"
"använd standardvalet."
#: common/dialogs/dialog_global_lib_table_config.cpp:49
#, c-format
msgid "Copy default global %s library table (recommended)"
msgstr "Kopiera standard global bibliotektabell för %s (rekommenderas)"
#: common/dialogs/dialog_global_lib_table_config.cpp:51
#, c-format
msgid ""
"Select this option if you not sure about configuring the global %s library "
"table"
msgstr ""
"Välj det här alternativet om du inte är säker på att konfigurera den globala "
"bibliotektabellen för %s"
#: common/dialogs/dialog_global_lib_table_config.cpp:55
#, c-format
msgid "Copy custom global %s library table"
msgstr "Kopiera anpassad global bibliotektabell för %s"
#: common/dialogs/dialog_global_lib_table_config.cpp:57
#, c-format
msgid ""
"Select this option to copy a %s library table file other than the default"
msgstr ""
"Välj det här alternativet för att kopiera en annan %sbibliotekstabellfil än "
"standard"
#: common/dialogs/dialog_global_lib_table_config.cpp:61
#, c-format
msgid "Create an empty global %s library table"
msgstr "Skapa en tom global bibliotekstabell för %s"
#: common/dialogs/dialog_global_lib_table_config.cpp:63
#, c-format
msgid ""
"Select this option to define %s libraries in project specific library tables"
msgstr ""
"Välj det här alternativet för att definiera %s bibliotek i projektspecifika "
"bibliotekstabeller"
#: common/dialogs/dialog_global_lib_table_config.cpp:67
#, c-format
msgid "Select global %s library table file:"
msgstr "Välj global bibliotekstabellfil för %s:"
#: common/dialogs/dialog_global_lib_table_config_base.cpp:21
#: common/dialogs/dialog_global_lib_table_config_base.cpp:28
#: common/dialogs/dialog_global_lib_table_config_base.cpp:30
#: common/dialogs/dialog_global_lib_table_config_base.cpp:34
#: common/dialogs/dialog_global_lib_table_config_base.cpp:35
#: common/dialogs/dialog_global_lib_table_config_base.cpp:39
#: common/dialogs/dialog_global_lib_table_config_base.cpp:40
#: common/dialogs/dialog_global_lib_table_config_base.cpp:47
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:142
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:154
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:166
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:178
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:240
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:252
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:264
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:276
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:241
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:256
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:271
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:379
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:383
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:387
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:391
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:395
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:399
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:403
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:407
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:411
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:415
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:419
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:423
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:427
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:431
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:435
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:439
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:230
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:242
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:254
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:268
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:282
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:294
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:310
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:324
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:340
msgid "dummy"
msgstr "dummy"
#: common/dialogs/dialog_global_lib_table_config_base.cpp:51
msgid "Select a file"
msgstr "Välj fil"
#: common/dialogs/dialog_global_lib_table_config_base.h:56
msgid "Configure Global Library Table"
msgstr "Konfigurera global bibliotekstabell"
#: common/dialogs/dialog_grid_settings_base.cpp:26 common/tool/actions.cpp:474
msgid "Grid Origin"
msgstr "Rutnäts origo"
#: common/dialogs/dialog_grid_settings_base.cpp:63
#: common/dialogs/dialog_grid_settings_base.cpp:78
#: eeschema/dialogs/dialog_erc_base.cpp:67
#: eeschema/dialogs/dialog_erc_base.cpp:107
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:140
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:196
#: eeschema/dialogs/panel_setup_buses_base.cpp:144
#: eeschema/dialogs/panel_setup_buses_base.cpp:148
#: pcbnew/dialogs/dialog_drc_base.cpp:85 pcbnew/dialogs/dialog_drc_base.cpp:157
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:109
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:141
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:178
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:228
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:294
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:661
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:681
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:861
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:873
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:885
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:894
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:906
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:918
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:930
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:942
#: pcbnew/dialogs/panel_display_options_base.cpp:28
#: pcbnew/dialogs/panel_display_options_base.cpp:106
#: pcbnew/dialogs/panel_edit_options_base.cpp:273
#: pcbnew/dialogs/panel_edit_options_base.cpp:410
msgid "a page"
msgstr "en sida"
#: common/dialogs/dialog_grid_settings_base.cpp:67
msgid "Current Grid"
msgstr "Nuvarande Rutnät"
#: common/dialogs/dialog_grid_settings_base.cpp:83
msgid "User Defined Grid"
msgstr "Användardefinierat Rutnät"
#: common/dialogs/dialog_grid_settings_base.cpp:91
msgid "Size X:"
msgstr "Storlek X:"
#: common/dialogs/dialog_grid_settings_base.cpp:102
msgid "Size Y:"
msgstr "Storlek Y:"
#: common/dialogs/dialog_grid_settings_base.cpp:123
msgid "Fast Switching"
msgstr "Snabb Växling"
#: common/dialogs/dialog_grid_settings_base.cpp:131
msgid "Grid 1:"
msgstr "Rutnät 1:"
#: common/dialogs/dialog_grid_settings_base.cpp:142
#: common/dialogs/dialog_grid_settings_base.cpp:157
msgid "(hotkey)"
msgstr "(snabbtangent)"
#: common/dialogs/dialog_grid_settings_base.cpp:146
msgid "Grid 2:"
msgstr "Rutnät 2:"
#: common/dialogs/dialog_grid_settings_base.cpp:173 common/tool/actions.cpp:480
msgid "Reset Grid Origin"
msgstr "Återställ rutnätets origo"
#: common/dialogs/dialog_grid_settings_base.cpp:176
msgid "Reset Grid Sizes"
msgstr "Återställ rutnätsstorlekar"
#: common/dialogs/dialog_grid_settings_base.cpp:178
msgid "Resets the list of grid sizes to default values"
msgstr "Återställer listan över rutnätsstorlekar till dess standardvärden"
#: common/dialogs/dialog_grid_settings_base.h:80
msgid "Grid Settings"
msgstr "Rutnätsinställningar"
#: common/dialogs/dialog_hotkey_list.cpp:33
msgid "Hotkey List"
msgstr "Snabbtangentslista"
#: common/dialogs/dialog_locked_items_query.cpp:35
msgid "Skip Locked Items"
msgstr "Hoppa över låsta objekt"
#: common/dialogs/dialog_locked_items_query.cpp:36
msgid ""
"Remove locked items from the selection and only apply the operation to the "
"unlocked items (if any)."
msgstr ""
"Ta bort låsta objekt från urvalet och applicera operationen endast på olåsta "
"objekt (om det finns några)."
#: common/dialogs/dialog_locked_items_query_base.cpp:30
#, c-format
msgid "The selection contains %d locked items."
msgstr "Urvalet innehåller %d låsta objekt."
#: common/dialogs/dialog_locked_items_query_base.cpp:34
msgid "These items will be skipped unless you override the locks."
msgstr "Dessa objekt hoppas över om du inte åsidosätter lås."
#: common/dialogs/dialog_locked_items_query_base.cpp:44
msgid "Remember decision for this session."
msgstr "Kom ihåg valet under denna session."
#: common/dialogs/dialog_locked_items_query_base.cpp:45
msgid ""
"Remember the option selected for the remainder of this session.\n"
"This dialog will not be shown again until KiCad is restarted."
msgstr ""
"Kom ihåg valt alternativ för återstoden av sessionen.\n"
"Denna dialog visas inte igen förrän KiCad startas om."
#: common/dialogs/dialog_locked_items_query_base.cpp:55
msgid "Override Locks"
msgstr "Åsidosätt lås"
#: common/dialogs/dialog_locked_items_query_base.cpp:56
msgid ""
"Override locks and apply the operation on all the items selected.\n"
"Any locked items will remain locked after the operation is complete."
msgstr ""
"Åsidosätt lås och applicera operationen på alla valda objekt.\n"
"Alla låsta objekt förblir låsta tills operationen genomförts."
#: common/dialogs/dialog_locked_items_query_base.h:56
msgid "Locked Items"
msgstr "Låsta objekt"
#: common/dialogs/dialog_migrate_settings.cpp:32
msgid "Quit KiCad"
msgstr "Avsluta KiCad"
#: common/dialogs/dialog_migrate_settings.cpp:57
#: common/dialogs/dialog_migrate_settings_base.cpp:23
#, c-format
msgid "Welcome to KiCad %s!"
msgstr "Välkommen till KiCad %s!"
#: common/dialogs/dialog_migrate_settings.cpp:66
msgid "Import settings from a previous version (none found)"
msgstr "Importera inställningar från en tidigare version (ingen hittades)"
#: common/dialogs/dialog_migrate_settings.cpp:137
msgid "Select Settings Path"
msgstr "Välj Inställningssökväg"
#: common/dialogs/dialog_migrate_settings_base.cpp:32
msgid "How would you like to configure KiCad?"
msgstr "Hur vill du konfigurera KiCad?"
#: common/dialogs/dialog_migrate_settings_base.cpp:36
msgid "Import settings from a previous version at:"
msgstr "Importera inställningar från en tidigare version i:"
#: common/dialogs/dialog_migrate_settings_base.cpp:51
msgid "Choose a different path"
msgstr "Välj en annan sökväg"
#: common/dialogs/dialog_migrate_settings_base.cpp:58
msgid "The selected path does not contain valid KiCad settings!"
msgstr "Den valda sökvägen innehåller inte giltiga KiCad-inställningar!"
#: common/dialogs/dialog_migrate_settings_base.cpp:65
msgid "Import library configuration from previous version"
msgstr "Importera bibliotekskonfiguration från tidigare version"
#: common/dialogs/dialog_migrate_settings_base.cpp:67
msgid ""
"When checked, the symbol and footprint library tables from the previous "
"version will be imported into this version"
msgstr ""
"När markerad kommer tabellerna för symbol- och fotavtrycksbibliotek från den "
"tidigare versionen att importeras till den här versionen"
#: common/dialogs/dialog_migrate_settings_base.cpp:71
msgid "Start with default settings"
msgstr "Börja med standardinställningar"
#: common/dialogs/dialog_migrate_settings_base.h:69
msgid "Configure KiCad Settings Path"
msgstr "Konfigurera sökväg för KiCad-inställningar"
#: common/dialogs/dialog_page_settings.cpp:58
msgid "A5 148x210mm"
msgstr "A5 148x210mm"
#: common/dialogs/dialog_page_settings.cpp:59
msgid "A4 210x297mm"
msgstr "A4 210x297mm"
#: common/dialogs/dialog_page_settings.cpp:60
msgid "A3 297x420mm"
msgstr "A3 297x420mm"
#: common/dialogs/dialog_page_settings.cpp:61
msgid "A2 420x594mm"
msgstr "A2 420x594mm"
#: common/dialogs/dialog_page_settings.cpp:62
msgid "A1 594x841mm"
msgstr "A1 594x841mm"
#: common/dialogs/dialog_page_settings.cpp:63
msgid "A0 841x1189mm"
msgstr "A0 841x1189mm"
#: common/dialogs/dialog_page_settings.cpp:64
msgid "A 8.5x11in"
msgstr "A 8,5x11 tum"
#: common/dialogs/dialog_page_settings.cpp:65
msgid "B 11x17in"
msgstr "B 11x17 tum"
#: common/dialogs/dialog_page_settings.cpp:66
msgid "C 17x22in"
msgstr "C 17x22 tum"
#: common/dialogs/dialog_page_settings.cpp:67
msgid "D 22x34in"
msgstr "D 22x34 tum"
#: common/dialogs/dialog_page_settings.cpp:68
msgid "E 34x44in"
msgstr "E 34x44 tum"
#: common/dialogs/dialog_page_settings.cpp:69
msgid "USLetter 8.5x11in"
msgstr "USLetter 8,5x11 tum"
#: common/dialogs/dialog_page_settings.cpp:70
msgid "USLegal 8.5x14in"
msgstr "USLegal 8,5x14 tum"
#: common/dialogs/dialog_page_settings.cpp:71
msgid "USLedger 11x17in"
msgstr "USLedger 11x17 tum"
#: common/dialogs/dialog_page_settings.cpp:72
msgid "User (Custom)"
msgstr "Användaranpassad"
#: common/dialogs/dialog_page_settings.cpp:104
msgid "Preview Settings"
msgstr "Förhandsgranska inställningar"
#: common/dialogs/dialog_page_settings.cpp:105
msgid "Preview Paper"
msgstr "Förhandsgranska papper"
#: common/dialogs/dialog_page_settings.cpp:106
msgid "Preview Title Block Data"
msgstr "Förhandsgranska uppgifter i namnruta"
#: common/dialogs/dialog_page_settings.cpp:110
#: common/dialogs/dialog_page_settings_base.h:147
msgid "Page Settings"
msgstr "Sidinställningar"
#: common/dialogs/dialog_page_settings.cpp:111
#: common/dialogs/dialog_page_settings_base.cpp:27
msgid "Paper"
msgstr "Papper"
#: common/dialogs/dialog_page_settings.cpp:112
msgid "Title Block"
msgstr "Namnruta"
#: common/dialogs/dialog_page_settings.cpp:473
#, c-format
msgid "Drawing sheet file '%s' not found."
msgstr "Kretsschema-arks fil '%s' hittades inte."
#: common/dialogs/dialog_page_settings.cpp:707
#: common/dialogs/dialog_page_settings_base.cpp:51
msgid "Portrait"
msgstr "Porträtt"
#: common/dialogs/dialog_page_settings.cpp:709
#: common/dialogs/dialog_page_settings_base.cpp:51
msgid "Landscape"
msgstr "Landskap"
#: common/dialogs/dialog_page_settings.cpp:795
msgid "Select Drawing Sheet File"
msgstr "Välj Ritningsarksfil"
#: common/dialogs/dialog_page_settings_base.cpp:38
msgid "dummy text"
msgstr "exempeltext"
#: common/dialogs/dialog_page_settings_base.cpp:47
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:217
#: eeschema/dialogs/dialog_label_properties.cpp:171
#: eeschema/dialogs/dialog_pin_properties_base.cpp:113
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:296
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:340
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:137
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:138
#: pcbnew/dialogs/dialog_text_properties_base.cpp:230
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:179
msgid "Orientation:"
msgstr "Orientering:"
#: common/dialogs/dialog_page_settings_base.cpp:57
msgid "Custom paper size:"
msgstr "Anpassad pappersstorlek:"
#: common/dialogs/dialog_page_settings_base.cpp:69
#: pcbnew/dialogs/dialog_board_statistics.cpp:105
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:301
#: pcbnew/dialogs/dialog_text_properties_base.cpp:178
msgid "Height:"
msgstr "Höjd:"
#: common/dialogs/dialog_page_settings_base.cpp:82
msgid "Custom paper height."
msgstr "Anpassad pappershöjd."
#: common/dialogs/dialog_page_settings_base.cpp:86
#: common/dialogs/dialog_page_settings_base.cpp:107
#: common/dialogs/dialog_unit_entry_base.cpp:34
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:204
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:330
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:378
#: eeschema/dialogs/dialog_line_properties_base.cpp:39
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:39
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:80
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:281
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:297
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:310
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:323
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:336
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:396
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:410
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:425
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:122
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:133
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:282
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:295
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:311
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:253
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:266
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:282
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:145
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:198
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:215
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:233
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:40
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:51
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:66
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:77
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:92
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:103
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:118
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:129
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:168
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1141
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1152
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1167
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1178
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1193
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1204
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1219
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1230
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1244
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1267
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1329
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1340
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1505
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:87
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:116
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:127
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:140
#: pcbnew/dialogs/dialog_target_properties_base.cpp:35
#: pcbnew/dialogs/dialog_target_properties_base.cpp:46
#: pcbnew/dialogs/dialog_text_properties_base.cpp:174
#: pcbnew/dialogs/dialog_text_properties_base.cpp:187
#: pcbnew/dialogs/dialog_text_properties_base.cpp:200
#: pcbnew/dialogs/dialog_text_properties_base.cpp:213
#: pcbnew/dialogs/dialog_text_properties_base.cpp:226
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:146
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:162
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:175
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:199
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:32
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:43
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:54
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:146
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:162
msgid "unit"
msgstr "enhet"
#: common/dialogs/dialog_page_settings_base.cpp:90
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:43
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:210
#: eeschema/dialogs/dialog_line_properties_base.cpp:30
#: eeschema/dialogs/dialog_shape_properties_base.cpp:42
#: eeschema/dialogs/dialog_text_properties_base.cpp:216
#: pcbnew/dialogs/dialog_board_statistics.cpp:103
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:272
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:25
#: pcbnew/dialogs/dialog_text_properties_base.cpp:165
msgid "Width:"
msgstr "Bredd:"
#: common/dialogs/dialog_page_settings_base.cpp:103
msgid "Custom paper width."
msgstr "Anpassad pappersbredd."
#: common/dialogs/dialog_page_settings_base.cpp:114
#: common/dialogs/dialog_page_settings_base.cpp:225
#: common/dialogs/dialog_page_settings_base.cpp:237
#: common/dialogs/dialog_page_settings_base.cpp:249
#: common/dialogs/dialog_page_settings_base.cpp:261
#: common/dialogs/dialog_page_settings_base.cpp:273
#: common/dialogs/dialog_page_settings_base.cpp:285
#: common/dialogs/dialog_page_settings_base.cpp:297
#: common/dialogs/dialog_page_settings_base.cpp:309
#: common/dialogs/dialog_page_settings_base.cpp:321
#: common/dialogs/dialog_page_settings_base.cpp:333
#: common/dialogs/dialog_page_settings_base.cpp:345
#: common/dialogs/dialog_page_settings_base.cpp:357
#: common/dialogs/dialog_page_settings_base.cpp:369
msgid "Export to other sheets"
msgstr "Exportera till andra ark"
#: common/dialogs/dialog_page_settings_base.cpp:142 common/rc_item.cpp:371
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:104
#: gerbview/widgets/gerbview_layer_widget.cpp:137 pcbnew/pcb_marker.cpp:213
#: pcbnew/widgets/appearance_controls.cpp:353
msgid "Drawing Sheet"
msgstr "Ritningsark"
#: common/dialogs/dialog_page_settings_base.cpp:155
#: eeschema/dialogs/dialog_sim_model_base.cpp:38 eeschema/sch_field.cpp:262
#: pcbnew/dialogs/dialog_export_step_base.cpp:22
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:25
msgid "File:"
msgstr "Fil:"
#: common/dialogs/dialog_page_settings_base.cpp:174
msgid "Title Block Parameters"
msgstr "Parametrar för namnruta"
#: common/dialogs/dialog_page_settings_base.cpp:184
#, c-format
msgid "Number of sheets: %d"
msgstr "Antal ark: %d"
#: common/dialogs/dialog_page_settings_base.cpp:191
#, c-format
msgid "Sheet number: %d"
msgstr "Bladnummer: %d"
#: common/dialogs/dialog_page_settings_base.cpp:204
msgid "Issue Date:"
msgstr "Utgivningsdatum:"
#: common/dialogs/dialog_page_settings_base.cpp:216
msgid "<<<"
msgstr "<<<"
#: common/dialogs/dialog_page_settings_base.cpp:228
msgid "Revision:"
msgstr "Revision:"
#: common/dialogs/dialog_page_settings_base.cpp:240
#: eeschema/dialogs/dialog_export_netlist.cpp:433
msgid "Title:"
msgstr "Titel:"
#: common/dialogs/dialog_page_settings_base.cpp:252
msgid "Company:"
msgstr "Företag:"
#: common/dialogs/dialog_page_settings_base.cpp:264
msgid "Comment1:"
msgstr "Kommentar1:"
#: common/dialogs/dialog_page_settings_base.cpp:276
msgid "Comment2:"
msgstr "Kommentar2:"
#: common/dialogs/dialog_page_settings_base.cpp:288
msgid "Comment3:"
msgstr "Kommentar3:"
#: common/dialogs/dialog_page_settings_base.cpp:300
msgid "Comment4:"
msgstr "Kommentar4:"
#: common/dialogs/dialog_page_settings_base.cpp:312
msgid "Comment5:"
msgstr "Kommentar5:"
#: common/dialogs/dialog_page_settings_base.cpp:324
msgid "Comment6:"
msgstr "Kommentar6:"
#: common/dialogs/dialog_page_settings_base.cpp:336
msgid "Comment7:"
msgstr "Kommentar7:"
#: common/dialogs/dialog_page_settings_base.cpp:348
msgid "Comment8:"
msgstr "Kommentar8:"
#: common/dialogs/dialog_page_settings_base.cpp:360
msgid "Comment9:"
msgstr "Kommentar9:"
#: common/dialogs/dialog_paste_special.cpp:37
msgid ""
"Finds the next available reference designator for any designators that "
"already exist in the design."
msgstr ""
"Hittar nästa tillgängliga referensbeteckning för alla beteckningar som redan "
"finns i designen."
#: common/dialogs/dialog_paste_special.cpp:44
#, c-format
msgid "Replaces reference designators with '%s'."
msgstr "Ersätter referensbeteckningar med '%s'."
#: common/dialogs/dialog_paste_special_base.cpp:22
msgid "Assign unique reference designators to pasted symbols"
msgstr "Tilldela unika referensbeteckningar för inklistrade symboler"
#: common/dialogs/dialog_paste_special_base.cpp:22
msgid "Keep existing reference designators, even if they are duplicated"
msgstr "Behåll befintliga referensbeteckningar, även om de dupliceras"
#: common/dialogs/dialog_paste_special_base.cpp:22
msgid "Clear reference designators on all pasted symbols"
msgstr "Rensa referensbeteckningarna på alla inklistrade symboler"
#: common/dialogs/dialog_paste_special_base.cpp:24
msgid "Paste Options"
msgstr "Alternativ för Klistra in"
#: common/dialogs/dialog_paste_special_base.h:48
msgid "Paste Special"
msgstr "Klistra in special"
#: common/dialogs/dialog_print_generic.cpp:95
#: common/dialogs/dialog_print_generic.cpp:301
#: common/dialogs/dialog_print_generic_base.h:79 common/tool/actions.cpp:102
#: eeschema/dialogs/dialog_print_using_printer.cpp:144
#: eeschema/dialogs/dialog_print_using_printer_base.h:61
msgid "Print"
msgstr "Skriv ut"
#: common/dialogs/dialog_print_generic.cpp:96
#: common/dialogs/dialog_print_generic.cpp:247
#: eeschema/dialogs/dialog_print_using_printer.cpp:145
msgid "Print Preview"
msgstr "Förhandsgranskning"
#: common/dialogs/dialog_print_generic.cpp:97 common/hotkey_store.cpp:55
#: common/tool/action_menu.cpp:207 common/tool/action_menu.cpp:212
#: eeschema/dialogs/dialog_annotate.cpp:94 eeschema/dialogs/dialog_bom.cpp:136
#: eeschema/dialogs/dialog_change_symbols.cpp:157
#: eeschema/dialogs/dialog_erc.cpp:100 eeschema/dialogs/dialog_erc.cpp:429
#: eeschema/dialogs/dialog_export_netlist.cpp:275
#: eeschema/dialogs/dialog_ibis_parser_reporter.cpp:36
#: eeschema/dialogs/dialog_plot_schematic.cpp:76
#: eeschema/dialogs/dialog_print_using_printer.cpp:146
#: eeschema/dialogs/dialog_schematic_find_base.cpp:130
#: eeschema/dialogs/dialog_symbol_remap_base.cpp:33
#: eeschema/dialogs/dialog_update_from_pcb.cpp:66
#: eeschema/sim/sim_plot_frame_base.cpp:49 kicad/pcm/dialogs/dialog_pcm.cpp:159
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:72
#: pcbnew/dialogs/dialog_board_reannotate.cpp:112
#: pcbnew/dialogs/dialog_board_statistics.cpp:136
#: pcbnew/dialogs/dialog_drc.cpp:126 pcbnew/dialogs/dialog_drc.cpp:318
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:161
#: pcbnew/dialogs/dialog_export_step.cpp:123
#: pcbnew/dialogs/dialog_export_svg.cpp:94
#: pcbnew/dialogs/dialog_find_base.cpp:102
#: pcbnew/dialogs/dialog_footprint_checker.cpp:62
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:65
#: pcbnew/dialogs/dialog_gendrill.cpp:78
#: pcbnew/dialogs/dialog_import_netlist.cpp:82
#: pcbnew/dialogs/dialog_plot.cpp:181 pcbnew/dialogs/dialog_update_pcb.cpp:60
msgid "Close"
msgstr "Stäng"
#: common/dialogs/dialog_print_generic.cpp:155
msgid "Warning: Bad scale number"
msgstr "Varning: Ogiltigt värde för skala"
#: common/dialogs/dialog_print_generic.cpp:164
#, c-format
msgid ""
"Warning: Scale option set to a very large value.\n"
" Clamped to %f"
msgstr ""
"Varning: Skalalternativet är inställt på ett mycket stort värde.\n"
" Begränsat till %f"
#: common/dialogs/dialog_print_generic.cpp:172
#, c-format
msgid ""
"Warning: Scale option set to a very small value.\n"
" Clamped to %f"
msgstr ""
"Varning: Skalalternativet är inställt på ett mycket litet värde.\n"
" Begränsat till %f"
#: common/dialogs/dialog_print_generic.cpp:242
#: common/dialogs/dialog_print_generic.cpp:293
msgid "Nothing to print"
msgstr "Inget att skriva ut"
#: common/dialogs/dialog_print_generic.cpp:284
#: eeschema/dialogs/dialog_print_using_printer.cpp:318
msgid "Previous print job not yet complete."
msgstr "Tidigare utskriftsjobb ännu inte slutfört."
#: common/dialogs/dialog_print_generic.cpp:309
msgid "There was a problem printing."
msgstr "Ett problem uppstod vid utskrift."
#: common/dialogs/dialog_print_generic.cpp:351
msgid "An error occurred initializing the printer information."
msgstr "Ett fel inträffade vid initialisering av skrivarinformationen."
#: common/dialogs/dialog_print_generic_base.cpp:31
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:73
msgid "Output mode:"
msgstr "Utskriftsläge:"
#: common/dialogs/dialog_print_generic_base.cpp:35
#: common/dialogs/panel_setup_netclasses_base.cpp:54
#: eeschema/dialogs/dialog_label_properties_base.cpp:98
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:70
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:77
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:72
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:67
#: eeschema/fields_grid_table.cpp:351
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:99
#: pcbnew/dialogs/dialog_export_svg_base.cpp:81
#: pcbnew/tools/drawing_stackup_table_tool.cpp:269
msgid "Color"
msgstr "Färg"
#: common/dialogs/dialog_print_generic_base.cpp:35
#: pcbnew/dialogs/dialog_export_svg_base.cpp:81
msgid "Black and white"
msgstr "Svartvitt"
#: common/dialogs/dialog_print_generic_base.cpp:41
msgid "Print border and title block"
msgstr "Skriv ut ram och namnruta"
#: common/dialogs/dialog_print_generic_base.cpp:43
msgid "Print Frame references."
msgstr "Skriv ut Ramreferenser."
#: common/dialogs/dialog_print_generic_base.cpp:58
#: pcbnew/dialogs/dialog_plot_base.cpp:122
msgid "1:1"
msgstr "1:1"
#: common/dialogs/dialog_print_generic_base.cpp:64
msgid "Fit to page"
msgstr "Anpassa till sida"
#: common/dialogs/dialog_print_generic_base.cpp:73
msgid "Custom:"
msgstr "Anpassning:"
#: common/dialogs/dialog_print_generic_base.cpp:77
msgid "Set X scale adjust for exact scale plotting"
msgstr "Ställ in X-skala för att justera exakt skala"
#: common/dialogs/dialog_print_generic_base.cpp:96
msgid "Info text"
msgstr "Informationstext"
#: common/dialogs/dialog_print_generic_base.cpp:111
#: eeschema/dialogs/dialog_print_using_printer_base.cpp:62
msgid "Page Setup..."
msgstr "Sidinställningar..."
#: common/dialogs/dialog_text_entry_base.cpp:21
#: common/dialogs/dialog_text_entry_base.cpp:33
#: common/dialogs/dialog_unit_entry_base.cpp:22
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1535
msgid "MyLabel"
msgstr "MinEtikett"
#: common/dialogs/eda_list_dialog.cpp:47 common/widgets/lib_tree.cpp:154
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:790
#: eeschema/symbol_viewer_frame.cpp:163 eeschema/symbol_viewer_frame.cpp:178
#: kicad/pcm/dialogs/panel_packages_view.cpp:77
#: pcbnew/dialogs/dialog_copper_zones.cpp:252
#: pcbnew/footprint_viewer_frame.cpp:152 pcbnew/footprint_viewer_frame.cpp:167
msgid "Filter"
msgstr "Filtrera"
#: common/dialogs/eda_list_dialog_base.cpp:22
msgid "Items:"
msgstr "Föremål:"
#: common/dialogs/eda_reorderable_list_dialog_base.cpp:25
msgid "Available:"
msgstr "Tillgängliga:"
#: common/dialogs/eda_reorderable_list_dialog_base.cpp:40
msgid ">>"
msgstr ">>"
#: common/dialogs/eda_reorderable_list_dialog_base.cpp:43
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:71
msgid "<<"
msgstr "<<"
#: common/dialogs/eda_reorderable_list_dialog_base.cpp:52
msgid "Enabled:"
msgstr "Aktiverad:"
#: common/dialogs/eda_reorderable_list_dialog_base.cpp:65
#: eeschema/dialogs/dialog_label_properties_base.cpp:124
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:95
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:98
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:93
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:142
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:140
msgid "Move up"
msgstr "Flytta upp"
#: common/dialogs/eda_reorderable_list_dialog_base.cpp:70
#: eeschema/dialogs/dialog_label_properties_base.cpp:129
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:100
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:103
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:98
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:147
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:145
msgid "Move down"
msgstr "Flytta ner"
#: common/dialogs/eda_view_switcher_base.cpp:19
#: common/dialogs/eda_view_switcher_base.h:40
msgid "View Preset Switcher"
msgstr "Visa Förvalsväljare"
#: common/dialogs/panel_color_settings.cpp:51
msgid "Reveal Themes in Finder"
msgstr "Avslöja Teman i Finder"
#: common/dialogs/panel_color_settings.cpp:131
msgid "New theme name:"
msgstr "Nytt temanamn:"
#: common/dialogs/panel_color_settings.cpp:131
msgid "Add Color Theme"
msgstr "Lägg till Färgtema"
#: common/dialogs/panel_color_settings.cpp:143
msgid "Theme already exists!"
msgstr "Temat finns redan!"
#: common/dialogs/panel_color_settings.cpp:211
#: common/dialogs/panel_color_settings.cpp:233
msgid "New Theme..."
msgstr "Nytt Tema..."
#: common/dialogs/panel_color_settings.cpp:221
msgid "(read-only)"
msgstr "(skrivskyddad)"
#: common/dialogs/panel_color_settings.cpp:290
msgid "Copy color"
msgstr "Kopiera färg"
#: common/dialogs/panel_color_settings.cpp:293
msgid "Paste color"
msgstr "Klistra in färg"
#: common/dialogs/panel_color_settings.cpp:296
msgid "Revert to saved color"
msgstr "Återställ till sparad färg"
#: common/dialogs/panel_color_settings_base.cpp:19
#: pagelayout_editor/dialogs/panel_pl_editor_color_settings_base.cpp:21
msgid "Theme:"
msgstr "Tema:"
#: common/dialogs/panel_color_settings_base.cpp:33
msgid "Override individual item colors"
msgstr "Åsidosätt enskilda artikelfärger"
#: common/dialogs/panel_color_settings_base.cpp:34
msgid ""
"Show all items in their default color even if they have specific colors set "
"in their properties."
msgstr ""
"Visa alla objekt i standardfärg även om de har specifika färger i sina "
"egenskaper."
#: common/dialogs/panel_color_settings_base.cpp:41
msgid "Open Theme Folder"
msgstr "Öppna Temamappen"
#: common/dialogs/panel_color_settings_base.cpp:42
msgid "Open the folder containing color themes"
msgstr "Öppna mappen som innehåller färgteman"
#: common/dialogs/panel_common_settings.cpp:86
msgid "Icon scale:"
msgstr "Ikonskala:"
#: common/dialogs/panel_common_settings.cpp:96
#: common/dialogs/panel_common_settings_base.cpp:150
#: common/dialogs/panel_common_settings_base.cpp:165
#: common/dialogs/panel_mouse_settings_base.cpp:56
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:89
msgid "Automatic"
msgstr "Automatiskt"
#: common/dialogs/panel_common_settings.cpp:116
msgid ""
"Set the scale for the canvas.\n"
"\n"
"On high-DPI displays on some platforms, KiCad cannot determine the scaling "
"factor. In this case you may need to set this to a value to match your "
"system's DPI scaling. 2.0 is a common value. \n"
"\n"
"If this does not match the system DPI scaling, the canvas will not match the "
"window size and cursor position."
msgstr ""
"Ställ in skalan för duken.\n"
"\n"
"På skärmar med hög DPI på vissa plattformar kan KiCad inte bestämma "
"skalningsfaktorn. I det här fallet kan du behöva ställa in detta till ett "
"värde som matchar ditt systems DPI-skalning. 2.0 är ett vanligt värde.\n"
"\n"
"Om detta inte matchar systemets DPI-skalning, matchar duken inte "
"fönsterstorlek och markörposition."
#: common/dialogs/panel_common_settings.cpp:126
msgid ""
"Use an automatic value for the canvas scale.\n"
"\n"
"On some platforms, the automatic value is incorrect and should be set "
"manually."
msgstr ""
"Använd ett automatiskt värde för canvasskalan.\n"
"\n"
"På vissa plattformar är det automatiska värdet felaktigt och bör ställas in "
"manuellt."
#: common/dialogs/panel_common_settings.cpp:478
msgid "Executable files ("
msgstr "Körbara filer ("
#: common/dialogs/panel_common_settings.cpp:483
msgid "Select Preferred PDF Viewer"
msgstr "Välj önskad PDF-läsare"
#: common/dialogs/panel_common_settings_base.cpp:23
msgid "Antialiasing"
msgstr "Kantutjämning"
#: common/dialogs/panel_common_settings_base.cpp:32
msgid "Accelerated graphics:"
msgstr "Accelererad grafik:"
#: common/dialogs/panel_common_settings_base.cpp:36
#: common/dialogs/panel_common_settings_base.cpp:46
msgid "No Antialiasing"
msgstr "Ingen Kantutjämning"
#: common/dialogs/panel_common_settings_base.cpp:36
#: common/dialogs/panel_common_settings_base.cpp:46
msgid "Fast Antialiasing"
msgstr "Snabb Kantutjämning"
#: common/dialogs/panel_common_settings_base.cpp:36
#: common/dialogs/panel_common_settings_base.cpp:46
msgid "High Quality Antialiasing"
msgstr "Högkvalitativ Kantutjämning"
#: common/dialogs/panel_common_settings_base.cpp:42
msgid "Fallback graphics:"
msgstr "Reserv-grafik:"
#: common/dialogs/panel_common_settings_base.cpp:61
msgid "Helper Applications"
msgstr "Hjälpapplikationer"
#: common/dialogs/panel_common_settings_base.cpp:67
msgid "Text editor:"
msgstr "Textredigerare:"
#: common/dialogs/panel_common_settings_base.cpp:88
msgid "System default PDF viewer"
msgstr "Systemets standard PDF-visningsprogram"
#: common/dialogs/panel_common_settings_base.cpp:97
msgid "Other:"
msgstr "Övrigt:"
#: common/dialogs/panel_common_settings_base.cpp:114
msgid "User Interface"
msgstr "Användargränssnitt"
#: common/dialogs/panel_common_settings_base.cpp:120
msgid "Show icons in menus"
msgstr "Visa ikoner i menyer"
#: common/dialogs/panel_common_settings_base.cpp:123
msgid "Show scrollbars in editors"
msgstr "Visa rullningslister i redigerare"
#: common/dialogs/panel_common_settings_base.cpp:125
msgid "This change takes effect when relaunching the editor."
msgstr "Denna ändring verkställs när redigeraren startas om."
#: common/dialogs/panel_common_settings_base.cpp:129
msgid "Focus follows mouse between schematic and PCB editors"
msgstr "Fokus följer musen mellan kretsschema- och mönsterkortsredigerare"
#: common/dialogs/panel_common_settings_base.cpp:130
msgid ""
"If the mouse cursor is moved over the canvas of a schematic or PCB editor "
"window, that window is raised."
msgstr ""
"Om muspekaren förs över ritytan i kretsschema- eller "
"mönsterkortsredigeraren, framhävs det fönstret."
#: common/dialogs/panel_common_settings_base.cpp:134
msgid "Icon theme:"
msgstr "Ikontema:"
#: common/dialogs/panel_common_settings_base.cpp:138
msgid "Light"
msgstr "Ljus"
#: common/dialogs/panel_common_settings_base.cpp:139
msgid "Use icons designed for light window backgrounds"
msgstr "Använd ikoner framtagna för ljusa fönsterbakgrunder"
#: common/dialogs/panel_common_settings_base.cpp:144
#: gerbview/gerber_draw_item.cpp:691
msgid "Dark"
msgstr "Mörkt"
#: common/dialogs/panel_common_settings_base.cpp:145
msgid "Use icons designed for dark window backgrounds"
msgstr "Använd ikoner framtagna för mörka fönsterbakgrunder"
#: common/dialogs/panel_common_settings_base.cpp:152
msgid ""
"Automatically choose light or dark icons based on the system color theme"
msgstr ""
"Välj ljusa eller mörka ikoner automatiskt baserat på systemets färgschema"
#: common/dialogs/panel_common_settings_base.cpp:157
msgid "Canvas scale:"
msgstr "Kanvasskala:"
#: common/dialogs/panel_common_settings_base.cpp:174
msgid "Apply icon scaling to fonts"
msgstr "Tillämpa ikonskalning till typsnitt"
#: common/dialogs/panel_common_settings_base.cpp:177
msgid "(This workaround will improve some GTK HiDPI font scaling issues.)"
msgstr ""
"(Denna tillfälliga lösning förbättrar vissa GTK HiDPI-"
"typsnittsskalningsproblem.)"
#: common/dialogs/panel_common_settings_base.cpp:187
msgid "High-contrast mode dimming factor:"
msgstr "Högkontrastlägets dämpningsfaktor:"
#: common/dialogs/panel_common_settings_base.cpp:194
#: eeschema/dialogs/panel_setup_formatting_base.cpp:77
#: eeschema/dialogs/panel_setup_formatting_base.cpp:92
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:118
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:138
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:158
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:324
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:295
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:157
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:195
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:245
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:286
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:636
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:173
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:127
#: pcbnew/teardrop/dialog_teardrop_base.cpp:56
#: pcbnew/teardrop/dialog_teardrop_base.cpp:68
#: pcbnew/teardrop/dialog_teardrop_base.cpp:113
#: pcbnew/teardrop/dialog_teardrop_base.cpp:160
#: pcbnew/teardrop/dialog_teardrop_base.cpp:172
#: pcbnew/teardrop/dialog_teardrop_base.cpp:217
#: pcbnew/teardrop/dialog_teardrop_base.cpp:264
#: pcbnew/teardrop/dialog_teardrop_base.cpp:276
#: pcbnew/teardrop/dialog_teardrop_base.cpp:321
msgid "%"
msgstr "%"
#: common/dialogs/panel_common_settings_base.cpp:211
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:21
msgid "Editing"
msgstr "Redigering"
#: common/dialogs/panel_common_settings_base.cpp:213
msgid "Warp mouse to origin of moved object"
msgstr "Förflytta musen till det flyttade objektets ursprung"
#: common/dialogs/panel_common_settings_base.cpp:217
msgid "First hotkey selects tool"
msgstr "Första snabbtangenten väljer verktyg"
#: common/dialogs/panel_common_settings_base.cpp:218
msgid ""
"If not checked, hotkeys will immediately perform an action even if the "
"relevant tool was not previously selected."
msgstr ""
"Om det inte är markerat kommer snabbtangenter omedelbart att utföra en "
"åtgärd även om det aktuella verktyget inte tidigare valts."
#: common/dialogs/panel_common_settings_base.cpp:226
msgid "Session"
msgstr "Session"
#: common/dialogs/panel_common_settings_base.cpp:228
msgid "Remember open files for next project launch"
msgstr "Kom ihåg öppna filer till nästa gång projektet öppnas"
#: common/dialogs/panel_common_settings_base.cpp:230
msgid ""
"If checked, launching a project will also launch tools such as the schematic "
"and board editors with previously open files"
msgstr ""
"Om detta alternativ är markerat kommer öppnandet av ett projekt också att "
"starta verktyg som kretsschema- och mönsterkortsredigerare med tidigare "
"öppna filer"
#: common/dialogs/panel_common_settings_base.cpp:243
msgid "&Auto save:"
msgstr "Autospara:"
#: common/dialogs/panel_common_settings_base.cpp:248
msgid ""
"Delay after the first change to create a backup file of the board on disk.\n"
"If set to 0, auto backup is disabled"
msgstr ""
"Fördröj efter den första ändringen för att skapa en säkerhetskopia av "
"kretskortet.\n"
"Om värdet är 0 inaktiveras automatisk säkerhetskopiering"
#: common/dialogs/panel_common_settings_base.cpp:253
#: common/dialogs/panel_common_settings_base.cpp:330
msgid "minutes"
msgstr "minuter"
#: common/dialogs/panel_common_settings_base.cpp:257
msgid "File history size:"
msgstr "Filhistorikstorlek:"
#: common/dialogs/panel_common_settings_base.cpp:264
msgid "3D cache file duration:"
msgstr "3D-cachefils varaktighet:"
#: common/dialogs/panel_common_settings_base.cpp:269
msgid ""
"3D cache files older than this are deleted.\n"
"If set to 0, cache clearing is disabled"
msgstr ""
"3D-cachefiler som är äldre än detta raderas.\n"
"Om den är inställd på 0 är cache-rensning inaktiverad"
#: common/dialogs/panel_common_settings_base.cpp:273
msgid "days"
msgstr "dagar"
#: common/dialogs/panel_common_settings_base.cpp:286
msgid "Project Backup"
msgstr "Säkerhetskopiering av projekt"
#: common/dialogs/panel_common_settings_base.cpp:293
msgid "Automatically backup projects"
msgstr "Säkerhetskopiera projekt automatiskt"
#: common/dialogs/panel_common_settings_base.cpp:294
msgid ""
"Automatically create backup archives of the current project when saving files"
msgstr ""
"Skapa automatiskt säkerhetskopieringsarkiv för det aktuella projektet när du "
"sparar filer"
#: common/dialogs/panel_common_settings_base.cpp:298
msgid "Create backups when auto save occurs"
msgstr "Skapa säkerhetskopior när autospara sker"
#: common/dialogs/panel_common_settings_base.cpp:299
msgid ""
"Create backups when the auto save feature is enabled. If not checked, "
"backups will only be created when you manually save a file."
msgstr ""
"Skapa säkerhetskopior när funktionen för automatisk spara är aktiverad. Om "
"det inte är markerat skapas säkerhetskopior endast när du sparar en fil "
"manuellt."
#: common/dialogs/panel_common_settings_base.cpp:303
msgid "Maximum backups to keep:"
msgstr "Maximalt antal säkerhetskopior att behålla:"
#: common/dialogs/panel_common_settings_base.cpp:305
msgid "How many backup files total to keep (set to 0 for no limit)"
msgstr ""
"Hur många säkerhetskopior som totalt ska sparas (sätt till 0 för obegränsat)"
#: common/dialogs/panel_common_settings_base.cpp:312
msgid "Maximum backups per day:"
msgstr "Maximalt antal säkerhetskopior per dag:"
#: common/dialogs/panel_common_settings_base.cpp:314
msgid "How many backup files to keep each day (set to 0 for no limit)"
msgstr ""
"Hur många säkerhetskopieringsfiler som ska sparas varje dag (sätt till 0 för "
"obegränsat)"
#: common/dialogs/panel_common_settings_base.cpp:321
msgid "Minimum time between backups:"
msgstr "Minsta tid mellan säkerhetskopior:"
#: common/dialogs/panel_common_settings_base.cpp:323
msgid ""
"Number of minutes since the last backup before another will be created the "
"next time you save (set to 0 for no minimum)"
msgstr ""
"Antal minuter sedan den senaste säkerhetskopian innan en annan skapas nästa "
"gång du sparar (ställ in på 0 utan minimum)"
#: common/dialogs/panel_common_settings_base.cpp:334
msgid "Maximum total backup size:"
msgstr "Maximal säkerhetskopieringsstorlek:"
#: common/dialogs/panel_common_settings_base.cpp:336
msgid ""
"If the total size of backup files grows above this limit, old backups will "
"be deleted (set to 0 for no limit)"
msgstr ""
"Om den totala storleken på säkerhetskopieringsfilerna överstiger denna gräns "
"kommer gamla säkerhetskopior att raderas (ställ in på 0 för obegränsat)"
#: common/dialogs/panel_common_settings_base.cpp:343
msgid "MB"
msgstr "MB"
#: common/dialogs/panel_data_collection_base.cpp:20
msgid ""
"KiCad can anonymously report crashes and special event data to developers in "
"order to aid identifying critical bugs across the user base more effectively "
"and help profile functionality to guide improvements.\n"
"\n"
"To link automatic reports from the same KiCad install, a unique identifier "
"is generated that is completely random, it is only used for the purposes of "
"crash reporting. No personally identifiable information (PII) including IP "
"address is stored or connected to this identifier. You may reset this id at "
"anytime with the button provided.\n"
"\n"
"If you choose to voluntarily participate, KiCad will automatically handle "
"sending said reports when crashes or events occur. Your design files such as "
"schematic or PCB are not shared in this process."
msgstr ""
"KiCad kan rapportera krascher och data för speciella händelser anonymt till "
"utvecklare för att underlätta effektivare identifiering av kritiska buggar "
"hos användarna och hjälpa till att profilera funktionalitet för att vägleda "
"förbättringsarbetet.\n"
"\n"
"För att länka samman automatiska rapporter från en och samma KiCad-"
"installation, genereras en unik identifikation som är helt slumpmässig och "
"som endast används för kraschrapporteringsändamål. Ingen personligt "
"identifierbar information (PII) inklusive IP-adress lagras eller kopplas "
"till denna identifikation. Du kan nollställa denna identifikation "
"närsomhelst med knappen som finns tillgänglig för det.\n"
"\n"
"Om du väljer att delta frivilligt, kommer KiCad automatiskt att ta hand om "
"sändning av dessa rapporter när krascher eller särskilda händelser "
"inträffar. Dina designfiler såsom kretscchema och mönsterkort delas inte i "
"denna process."
#: common/dialogs/panel_data_collection_base.cpp:24
msgid "I agree to provide anonymous reports"
msgstr "Jag går med på att tillhandahålla anonyma rapporter"
#: common/dialogs/panel_data_collection_base.cpp:35
msgid "Reset Unique Id"
msgstr "Återställ unikt id"
#: common/dialogs/panel_hotkeys_editor.cpp:84
msgid "Type filter text"
msgstr "Skriv filtertext"
#: common/dialogs/panel_hotkeys_editor.cpp:120
msgid "Undo All Changes"
msgstr "Ångra Alla Ändringar"
#: common/dialogs/panel_hotkeys_editor.cpp:121
msgid "Undo all changes made so far in this dialog"
msgstr "Ångra alla ändringar som gjorts hittills i denna dialog"
#: common/dialogs/panel_hotkeys_editor.cpp:129
msgid "Import Hotkeys..."
msgstr "Importera Snabbtangenter..."
#: common/dialogs/panel_hotkeys_editor.cpp:130
msgid ""
"Import hotkey definitions from an external file, replacing the current values"
msgstr ""
"Importera snabbtangentdefinitioner från en extern fil och ersätt de aktuella "
"värdena"
#: common/dialogs/panel_hotkeys_editor.cpp:193
msgid "Import Hotkeys File:"
msgstr "Importera Snabbkommandofil:"
#: common/dialogs/panel_hotkeys_editor.cpp:241
msgid "| Action | Default Hotkey | Description"
msgstr "| Åtgärd | Standard Snabbtangent | Beskrivning"
#: common/dialogs/panel_image_editor.cpp:73
msgid "Incorrect scale number"
msgstr "Felaktig skalfaktor"
#: common/dialogs/panel_image_editor.cpp:83
#, c-format
msgid ""
"This scale results in an image which is too small (%.2f mm or %.1f mil)."
msgstr ""
"Denna skala resulterar i en bild som är för liten (%.2f mm eller %.1f mil)."
#: common/dialogs/panel_image_editor.cpp:94
#, c-format
msgid ""
"This scale results in an image which is very large (%.1f mm or %.2f in). Are "
"you sure?"
msgstr ""
"Denna skala resulterar i en bild som är mycket stor (%.1f mm eller %.2f "
"tum). Är du säker?"
#: common/dialogs/panel_image_editor_base.cpp:31
msgid "Grey"
msgstr "Grå"
#: common/dialogs/panel_image_editor_base.cpp:37
msgid "Image Scale:"
msgstr "Bildskala:"
#: common/dialogs/panel_mouse_settings.cpp:47
#: pcbnew/dialogs/panel_edit_options_base.cpp:221
msgid "Cmd"
msgstr "Cmd"
#: common/dialogs/panel_mouse_settings.cpp:48
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:181
#: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:43
#: pcbnew/dialogs/panel_edit_options_base.cpp:232
msgid "Option"
msgstr "Alternativ"
#: common/dialogs/panel_mouse_settings.cpp:85
msgid "Only one action can be assigned to each vertical scroll setting"
msgstr "Endast en åtgärd kan tilldelas varje vertikal rullinställning"
#: common/dialogs/panel_mouse_settings_base.cpp:18
msgid "Pan and Zoom"
msgstr "Panorera och zooma"
#: common/dialogs/panel_mouse_settings_base.cpp:25
msgid "Center and warp cursor on zoom"
msgstr "Centrera och förflytta markören vid zoom"
#: common/dialogs/panel_mouse_settings_base.cpp:26
msgid "Center the cursor on screen when zooming."
msgstr "Centrera markören på skärmen när du zoomar."
#: common/dialogs/panel_mouse_settings_base.cpp:33
msgid "Automatically pan while moving object"
msgstr "Panorera automatiskt medan objekt flyttas"
#: common/dialogs/panel_mouse_settings_base.cpp:34
msgid ""
"When drawing a track or moving an item, pan when approaching the edge of the "
"display."
msgstr ""
"När du ritar en ledare eller flyttar ett objekt, panorera när du närmar dig "
"skärmkanten."
#: common/dialogs/panel_mouse_settings_base.cpp:38
msgid "Use zoom acceleration"
msgstr "Använd zoomacceleration"
#: common/dialogs/panel_mouse_settings_base.cpp:39
msgid "Zoom faster when scrolling quickly"
msgstr "Zooma snabbare när du rullar snabbt"
#: common/dialogs/panel_mouse_settings_base.cpp:45
msgid "Zoom speed:"
msgstr "Zoomhastighet:"
#: common/dialogs/panel_mouse_settings_base.cpp:51
msgid "How far to zoom in for each rotation of the mouse wheel"
msgstr "Hur långt att zooma in för varje rotation av mushjulet"
#: common/dialogs/panel_mouse_settings_base.cpp:58
msgid "Pick the zoom speed automatically"
msgstr "Välj zoomhastighet automatiskt"
#: common/dialogs/panel_mouse_settings_base.cpp:67
msgid "Auto pan speed:"
msgstr "Automatisk panoreringshastighet:"
#: common/dialogs/panel_mouse_settings_base.cpp:72
msgid "How fast to pan when moving an object off the edge of the screen"
msgstr "Hur snabbt panorering sker när ett objekt förflyttas över skärmkanten"
#: common/dialogs/panel_mouse_settings_base.cpp:91
msgid "Drag Gestures"
msgstr "Drag-gester"
#: common/dialogs/panel_mouse_settings_base.cpp:99
msgid "Left button drag:"
msgstr "Vänsterknappsdrag:"
#: common/dialogs/panel_mouse_settings_base.cpp:103
msgid "Draw selection rectangle"
msgstr "Rita urvalsrektangel"
#: common/dialogs/panel_mouse_settings_base.cpp:103
msgid "Drag selected objects; otherwise draw selection rectangle"
msgstr "Dra markerade objekt; annars rita urvalsrektangel"
#: common/dialogs/panel_mouse_settings_base.cpp:103
msgid "Drag any object (selected or not)"
msgstr "Dra något objekt (vald eller ej)"
#: common/dialogs/panel_mouse_settings_base.cpp:112
msgid "Middle button drag:"
msgstr "Mittknappsdrag:"
#: common/dialogs/panel_mouse_settings_base.cpp:116
#: common/dialogs/panel_mouse_settings_base.cpp:129
msgid "Pan"
msgstr "Panorera"
#: common/dialogs/panel_mouse_settings_base.cpp:116
#: common/dialogs/panel_mouse_settings_base.cpp:129
#: common/tool/zoom_menu.cpp:56
msgid "Zoom"
msgstr "Zoom"
#: common/dialogs/panel_mouse_settings_base.cpp:116
#: common/dialogs/panel_mouse_settings_base.cpp:129
#: eeschema/dialogs/panel_setup_formatting_base.cpp:149
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:49
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:158
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:232
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:358
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:329
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:91
#: pcbnew/dialogs/dialog_pad_properties.cpp:941
#: pcbnew/dialogs/dialog_pad_properties.cpp:950
#: pcbnew/dialogs/dialog_pad_properties.cpp:960
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:545
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:703
#: pcbnew/dialogs/dialog_plot_base.cpp:112 pcbnew/footprint.cpp:2833
#: pcbnew/pad.cpp:1705 pcbnew/pad.cpp:1719
#: pcbnew/widgets/appearance_controls.cpp:725
#: pcbnew/widgets/appearance_controls.cpp:767
#: pcbnew/widgets/appearance_controls.cpp:2442
#: pcbnew/widgets/appearance_controls.cpp:2461 pcbnew/zone.cpp:1363
msgid "None"
msgstr "Inget"
#: common/dialogs/panel_mouse_settings_base.cpp:125
msgid "Right button drag:"
msgstr "Högerknappsdrag:"
#: common/dialogs/panel_mouse_settings_base.cpp:145
msgid "Scroll Gestures"
msgstr "Rull-gester"
#: common/dialogs/panel_mouse_settings_base.cpp:153
msgid "Vertical touchpad or scroll wheel movement:"
msgstr "Vertikal pekplatte- eller rullhjulsrörelse:"
#: common/dialogs/panel_mouse_settings_base.cpp:158
msgid "Only one action can be assigned to each column"
msgstr "Endast en åtgärd kan tilldelas varje kolumn"
#: common/dialogs/panel_mouse_settings_base.cpp:175
msgid "--"
msgstr "--"
#: common/dialogs/panel_mouse_settings_base.cpp:179
#: pcbnew/dialogs/panel_edit_options_base.cpp:149
msgid "Ctrl"
msgstr "Ctrl"
#: common/dialogs/panel_mouse_settings_base.cpp:183
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:117
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:165
#: pcbnew/dialogs/panel_edit_options_base.cpp:129
#: pcbnew/dialogs/panel_edit_options_base.cpp:201
msgid "Shift"
msgstr "Skift"
#: common/dialogs/panel_mouse_settings_base.cpp:187
msgid "Alt"
msgstr "Alt"
#: common/dialogs/panel_mouse_settings_base.cpp:191
msgid "Zoom:"
msgstr "Zoom:"
#: common/dialogs/panel_mouse_settings_base.cpp:207
msgid "Pan up/down:"
msgstr "Panorera upp/ner:"
#: common/dialogs/panel_mouse_settings_base.cpp:223
msgid "Pan left/right:"
msgstr "Panorera vänster/höger:"
#: common/dialogs/panel_mouse_settings_base.cpp:257
msgid "Pan left/right with horizontal movement"
msgstr "Panorera åt vänster/höger med horisontell rörelse"
#: common/dialogs/panel_mouse_settings_base.cpp:258
msgid ""
"Pan the canvas left and right when scrolling left to right on the touchpad"
msgstr ""
"Panorera ritytan till vänster och höger när du rullar vänster och höger på "
"pekplattan"
#: common/dialogs/panel_mouse_settings_base.cpp:268
msgid "Reset to Mouse Defaults"
msgstr "Återställ till standardvärden för Mus"
#: common/dialogs/panel_mouse_settings_base.cpp:271
msgid "Reset to Trackpad Defaults"
msgstr "Återställ till standardvärden för Pekplatta"
#: common/dialogs/panel_setup_netclasses.cpp:90 common/eda_shape.cpp:1682
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:350
#: include/stroke_params.h:72 pcbnew/dialogs/dialog_copper_zones_base.cpp:232
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:358
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:329
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:703 pcbnew/footprint.cpp:2835
#: pcbnew/pad.cpp:1721 pcbnew/zone.cpp:593 pcbnew/zone.cpp:1365
msgid "Solid"
msgstr "Heldragen"
#: common/dialogs/panel_setup_netclasses.cpp:92 common/eda_shape.cpp:1683
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:350
#: include/stroke_params.h:73
msgid "Dashed"
msgstr "Streckad"
#: common/dialogs/panel_setup_netclasses.cpp:94 common/eda_shape.cpp:1684
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:350
#: include/stroke_params.h:74
msgid "Dotted"
msgstr "Prickad"
#: common/dialogs/panel_setup_netclasses.cpp:96 common/eda_shape.cpp:1685
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:350
#: include/stroke_params.h:75
msgid "Dash-Dot"
msgstr "Punktstreckad"
#: common/dialogs/panel_setup_netclasses.cpp:98 common/eda_shape.cpp:1686
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:350
#: include/stroke_params.h:76
msgid "Dash-Dot-Dot"
msgstr "Dubbelpunktstreckad"
#: common/dialogs/panel_setup_netclasses.cpp:426
msgid "Netclass must have a name."
msgstr "Nätklassen måste ha ett namn."
#: common/dialogs/panel_setup_netclasses.cpp:435
msgid "Netclass name already in use."
msgstr "Nätklassnamnet används redan."
#: common/dialogs/panel_setup_netclasses.cpp:496
msgid "Minimum copper clearance"
msgstr "Minsta isolationsavstånd mellan kopparobjekt"
#: common/dialogs/panel_setup_netclasses.cpp:497
msgid "Minimum track width"
msgstr "Minsta ledarbredd"
#: common/dialogs/panel_setup_netclasses.cpp:498
msgid "Via pad diameter"
msgstr "Kragdiameter för via"
#: common/dialogs/panel_setup_netclasses.cpp:499
msgid "Via plated hole diameter"
msgstr "Diameter för pläterat via"
#: common/dialogs/panel_setup_netclasses.cpp:500
msgid "Microvia pad diameter"
msgstr "Kragdiameter för mikrovia"
#: common/dialogs/panel_setup_netclasses.cpp:501
msgid "Microvia plated hole diameter"
msgstr "Diameter för pläterat mikrovia"
#: common/dialogs/panel_setup_netclasses.cpp:502
msgid "Differential pair track width"
msgstr "Ledarbredd för differentialpar"
#: common/dialogs/panel_setup_netclasses.cpp:503
msgid "Differential pair gap"
msgstr "Mellanrum mellan differentialpar"
#: common/dialogs/panel_setup_netclasses.cpp:504
msgid "Schematic wire thickness"
msgstr "Trådtjocklek i schema"
#: common/dialogs/panel_setup_netclasses.cpp:505
msgid "Bus wire thickness"
msgstr "Busstrådstjocklek"
#: common/dialogs/panel_setup_netclasses.cpp:506
msgid "Schematic wire color"
msgstr "Trådfärg i schema"
#: common/dialogs/panel_setup_netclasses.cpp:507
msgid "Schematic wire line style"
msgstr "Trådars linjestil i schema"
#: common/dialogs/panel_setup_netclasses.cpp:558
msgid "The default net class is required."
msgstr "Den förvalda nätklassen krävs."
#: common/dialogs/panel_setup_netclasses.cpp:702
#, c-format
msgid "<b>Nets matching '%s':</b>"
msgstr "<b>Nät som motsvarar '%s':</b>"
#: common/dialogs/panel_setup_netclasses_base.cpp:43
#: common/dialogs/panel_setup_netclasses_base.cpp:126
#: eeschema/sch_field.cpp:890 eeschema/sch_label.cpp:188
#: pcbnew/board_connected_item.cpp:168 pcbnew/pad.cpp:1747 pcbnew/zone.cpp:1425
msgid "Net Class"
msgstr "Nätklass"
#: common/dialogs/panel_setup_netclasses_base.cpp:44
#: pcbnew/tools/board_inspection_tool.cpp:493
#: pcbnew/tools/board_inspection_tool.cpp:998
msgid "Clearance"
msgstr "Isolationsavstånd"
#: common/dialogs/panel_setup_netclasses_base.cpp:45
#: pcb_calculator/pcb_calculator_frame.cpp:92
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:228
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:104
#: pcbnew/tools/board_inspection_tool.cpp:317
#: pcbnew/tools/board_inspection_tool.cpp:1151
msgid "Track Width"
msgstr "Ledarbredd"
#: common/dialogs/panel_setup_netclasses_base.cpp:46
#: pcb_calculator/pcb_calculator_frame.cpp:90
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:108
msgid "Via Size"
msgstr "Via-storlek"
#: common/dialogs/panel_setup_netclasses_base.cpp:47
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:230
msgid "Via Hole"
msgstr "Via-hål"
#: common/dialogs/panel_setup_netclasses_base.cpp:48
msgid "uVia Size"
msgstr "uVia-storlek"
#: common/dialogs/panel_setup_netclasses_base.cpp:49
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:232
msgid "uVia Hole"
msgstr "uVia-hål"
#: common/dialogs/panel_setup_netclasses_base.cpp:50
msgid "DP Width"
msgstr "DP-bredd"
#: common/dialogs/panel_setup_netclasses_base.cpp:51
msgid "DP Gap"
msgstr "DP-gap"
#: common/dialogs/panel_setup_netclasses_base.cpp:52
msgid "Wire Thickness"
msgstr "Trådtjocklek"
#: common/dialogs/panel_setup_netclasses_base.cpp:53
msgid "Bus Thickness"
msgstr "Busstjocklek"
#: common/dialogs/panel_setup_netclasses_base.cpp:55
#: common/stroke_params.cpp:210 eeschema/sch_line.cpp:897
msgid "Line Style"
msgstr "Linjestil"
#: common/dialogs/panel_setup_netclasses_base.cpp:61 common/eda_shape.cpp:1681
#: common/pgm_base.cpp:85 common/stroke_params.cpp:199
#: common/widgets/footprint_select_widget.cpp:142
#: eeschema/dialogs/dialog_global_edit_text_and_graphics.cpp:69
#: eeschema/dialogs/dialog_junction_props.cpp:46
#: eeschema/dialogs/dialog_line_properties.cpp:56
#: eeschema/dialogs/dialog_sim_model.cpp:468
#: eeschema/dialogs/dialog_wire_bus_properties.cpp:59
#: eeschema/dialogs/panel_setup_formatting_base.cpp:149
#: eeschema/lib_field.cpp:536 eeschema/lib_text.cpp:400
#: eeschema/lib_textbox.cpp:470 eeschema/sch_field.cpp:768
#: eeschema/sch_label.cpp:882 eeschema/sch_text.cpp:504
#: eeschema/sch_textbox.cpp:449 include/stroke_params.h:80
#: pcbnew/fp_text.cpp:309 pcbnew/fp_textbox.cpp:315
#: pcbnew/pcb_dimension.cpp:329 pcbnew/pcb_text.cpp:142
#: pcbnew/pcb_textbox.cpp:309
msgid "Default"
msgstr "Förinställning"
#: common/dialogs/panel_setup_netclasses_base.cpp:86
msgid "Set color to transparent to use KiCad default color."
msgstr "Välj transparent färg för att använda KiCads standardfärg."
#: common/dialogs/panel_setup_netclasses_base.cpp:101
msgid "Netclass assignments:"
msgstr "Nätklasstilldelningar:"
#: common/dialogs/panel_setup_netclasses_base.cpp:125
msgid "Pattern"
msgstr "Mönster"
#: common/dialogs/panel_setup_severities.cpp:43
#: common/dialogs/panel_setup_severities.cpp:114 pcbnew/pcb_marker.cpp:199
msgid "Ignore"
msgstr "Ignorera"
#: common/dialogs/panel_setup_severities.cpp:114
msgid "From Pin Conflicts Map"
msgstr "Från stiftkonfliktskarta"
#: common/dialogs/panel_text_variables.cpp:121
#: common/dialogs/panel_text_variables.cpp:149
msgid "Variable name cannot be empty."
msgstr "Variabelnamn kan inte utelämnas."
#: common/dialogs/panel_text_variables_base.cpp:37
msgid "Variable Name"
msgstr "Variabelnamn"
#: common/dialogs/panel_text_variables_base.cpp:38
msgid "Text Substitution"
msgstr "Textersättning"
#: common/draw_panel_gal.cpp:318 common/draw_panel_gal.cpp:484
msgid "Could not use OpenGL, falling back to software rendering"
msgstr "Kunde inte använda OpenGL, faller tillbaka på programvarurendering"
#: common/draw_panel_gal.cpp:324 common/draw_panel_gal.cpp:491
msgid "Could not use OpenGL"
msgstr "Kunde inte använda OpenGL"
#: common/drawing_sheet/drawing_sheet_parser.cpp:925
#, c-format
msgid "Drawing sheet '%s' not found."
msgstr "Ritningsark '%s' hittades inte."
#: common/drawing_sheet/drawing_sheet_parser.cpp:935
#, c-format
msgid "Drawing sheet '%s' could not be opened."
msgstr "Ritningsark '%s' kunde inte öppnas."
#: common/drawing_sheet/drawing_sheet_parser.cpp:948
#, c-format
msgid "Drawing sheet '%s' was not fully read."
msgstr "Ritningsark '%s' lästes inte in fullständigt."
#: common/drawing_sheet/ds_data_item.cpp:369
#: common/drawing_sheet/ds_draw_item.cpp:121 common/eda_item.cpp:329
#: common/eda_item.cpp:331 common/eda_item.cpp:362 common/eda_item.cpp:383
#: common/eda_text.cpp:1032 eeschema/dialogs/panel_setup_formatting_base.cpp:47
#: eeschema/lib_field.cpp:532 eeschema/lib_text.cpp:398 eeschema/lib_text.h:55
#: eeschema/sch_field.cpp:764
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:40
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:145
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:28 pcbnew/fp_text.cpp:279
#: pcbnew/fp_text.cpp:291 pcbnew/widgets/panel_selection_filter.cpp:187
#: pcbnew/widgets/panel_selection_filter_base.cpp:33
#: pcbnew/widgets/search_handlers.cpp:237
msgid "Text"
msgstr "Text"
#: common/drawing_sheet/ds_data_item.cpp:370
#: common/drawing_sheet/ds_draw_item.cpp:113 common/eda_item.cpp:360
#: common/eda_shape.cpp:64 eeschema/pin_type.cpp:79
#: gerbview/gerber_draw_item.cpp:212
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:134
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:59
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:120
msgid "Line"
msgstr "Linje"
#: common/drawing_sheet/ds_data_item.cpp:371
#: common/drawing_sheet/ds_draw_item.cpp:117 common/eda_shape.cpp:619
#: common/eda_shape.cpp:1675
#: eeschema/dialogs/dialog_label_properties_base.cpp:176
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:161
#: pcbnew/dialogs/dialog_pad_properties.cpp:742 pcbnew/pad.cpp:1697
msgid "Rectangle"
msgstr "Rektangel"
#: common/drawing_sheet/ds_data_item.cpp:372
#: common/drawing_sheet/ds_draw_item.cpp:125
#: common/drawing_sheet/ds_draw_item.cpp:288
msgid "Imported Shape"
msgstr "Importerad form"
#: common/drawing_sheet/ds_data_item.cpp:373
#: common/drawing_sheet/ds_draw_item.cpp:129
#: common/drawing_sheet/ds_draw_item.cpp:465 common/eda_item.cpp:390
#: eeschema/dialogs/dialog_image_properties.cpp:40 eeschema/sch_bitmap.h:129
#: pcbnew/dialogs/dialog_image_properties.cpp:41 pcbnew/pcb_bitmap.h:110
msgid "Image"
msgstr "Bild"
#: common/drawing_sheet/ds_data_model_io.cpp:92
#: common/drawing_sheet/ds_data_model_io.cpp:121
msgid "Error writing drawing sheet file"
msgstr "Fel vid skrivning av ritningsarksfil"
#: common/drawing_sheet/ds_draw_item.cpp:135
msgid "First Page Only"
msgstr "Endast Första Sidan"
#: common/drawing_sheet/ds_draw_item.cpp:136
msgid "Subsequent Pages"
msgstr "Efterföljande Sidor"
#: common/drawing_sheet/ds_draw_item.cpp:137
msgid "All Pages"
msgstr "Alla Sidor"
#: common/drawing_sheet/ds_draw_item.cpp:140
msgid "First Page Option"
msgstr "Alternativ för Första Sidan"
#: common/drawing_sheet/ds_draw_item.cpp:144
msgid "Repeat Count"
msgstr "Antal Upprepningar"
#: common/drawing_sheet/ds_draw_item.cpp:148
msgid "Repeat Label Increment"
msgstr "Ökning vid Upprepade Etiketter"
#: common/drawing_sheet/ds_draw_item.cpp:154
msgid "Repeat Position Increment"
msgstr "Ökning vid Upprepad Position"
#: common/drawing_sheet/ds_draw_item.cpp:156
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:39
msgid "Comment"
msgstr "Kommentar"
#: common/drawing_sheet/ds_draw_item.cpp:193
#, c-format
msgid "Text '%s'"
msgstr "Text '%s'"
#: common/drawing_sheet/ds_draw_item.cpp:384 eeschema/lib_shape.cpp:465
#: eeschema/sch_shape.cpp:415
#, c-format
msgid "Rectangle, width %s height %s"
msgstr "Rektangel, bredd %s höjd %s"
#: common/drawing_sheet/ds_draw_item.cpp:417
#, c-format
msgid "Line, length %s"
msgstr "Linje, längd %s"
#: common/drawing_sheet/ds_draw_item.cpp:471
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:105
#: gerbview/widgets/gerbview_layer_widget.cpp:139
msgid "Page Limits"
msgstr "Sidgränser"
#: common/dsnlexer.cpp:35
msgid "clipboard"
msgstr "urklipp"
#: common/dsnlexer.cpp:329
#, c-format
msgid "Expecting %s"
msgstr "Förväntar %s"
#: common/dsnlexer.cpp:337
#, c-format
msgid "Expecting '%s'"
msgstr "Förväntar '%s'"
#: common/dsnlexer.cpp:345
#, c-format
msgid "Unexpected %s"
msgstr "Oväntat %s"
#: common/dsnlexer.cpp:353
#, c-format
msgid "%s is a duplicate"
msgstr "%s är en dubblett"
#: common/dsnlexer.cpp:361
#, c-format
msgid "Unexpected '%s'"
msgstr "Oväntat '%s'"
#: common/dsnlexer.cpp:411
#, c-format
msgid "need a number for '%s'"
msgstr "behöver ett nummer för '%s'"
#: common/dsnlexer.cpp:696 common/dsnlexer.cpp:757
msgid "Un-terminated delimited string"
msgstr "Oavslutad avgränsad sträng"
#: common/dsnlexer.cpp:718
msgid "String delimiter must be a single character of ', \", or $"
msgstr "Strängavgränsare måste bestå av enstaka tecken på ', \"eller $"
#: common/dsnlexer.cpp:840
#, c-format
msgid ""
"Invalid floating point number in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d"
msgstr ""
"Ogiltigt flyttal i\n"
"fil: '%s'\n"
"rad: %d\n"
"förskjutning: %d"
#: common/dsnlexer.cpp:849
#, c-format
msgid ""
"Missing floating point number in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d"
msgstr ""
"Flyttal saknas i\n"
"fil: '%s'\n"
"rad: %d\n"
"förskjutning: %d"
#: common/dsnlexer.cpp:874
msgid "Invalid floating point number"
msgstr "Ogiltigt flyttalsnummer"
#: common/eda_base_frame.cpp:475
msgid "&About KiCad"
msgstr "&Om KiCad"
#: common/eda_base_frame.cpp:953
#, c-format
msgid "File '%s' was not found."
msgstr "Filen '%s' hittades inte."
#: common/eda_base_frame.cpp:1004
msgid "Preferences"
msgstr "Inställningar"
#: common/eda_base_frame.cpp:1015 common/hotkey_store.cpp:71
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:20
msgid "Common"
msgstr "Gemensamt"
#: common/eda_base_frame.cpp:1016
msgid "Mouse and Touchpad"
msgstr "Mus och Pekplatta"
#: common/eda_base_frame.cpp:1017
msgid "Hotkeys"
msgstr "Kortkommandon"
#: common/eda_base_frame.cpp:1020
msgid "Data Collection"
msgstr "Datainsamling"
#: common/eda_base_frame.cpp:1036 common/tool/actions.cpp:600
#: eeschema/symbol_editor/symbol_editor.cpp:86
#: kicad/tools/kicad_manager_actions.cpp:86
msgid "Symbol Editor"
msgstr "Symbolredigerare"
#: common/eda_base_frame.cpp:1037 common/eda_base_frame.cpp:1045
#: common/eda_base_frame.cpp:1066 common/eda_base_frame.cpp:1075
#: common/eda_base_frame.cpp:1104 common/eda_base_frame.cpp:1121
msgid "Display Options"
msgstr "Visningsalternativ"
#: common/eda_base_frame.cpp:1038 common/eda_base_frame.cpp:1046
#: common/eda_base_frame.cpp:1067 common/eda_base_frame.cpp:1076
#: pcbnew/dialogs/panel_edit_options_base.cpp:24
#: pcbnew/tools/zone_filler_tool.cpp:271
msgid "Editing Options"
msgstr "Redigeringsalternativ"
#: common/eda_base_frame.cpp:1039 common/eda_base_frame.cpp:1048
#: common/eda_base_frame.cpp:1068 common/eda_base_frame.cpp:1077
#: common/eda_base_frame.cpp:1088 common/eda_base_frame.cpp:1105
#: common/eda_base_frame.cpp:1122
msgid "Colors"
msgstr "Färger"
#: common/eda_base_frame.cpp:1044 common/hotkey_store.cpp:73
#: eeschema/menubar.cpp:139 eeschema/sch_edit_frame.cpp:1432
#: kicad/tools/kicad_manager_actions.cpp:80
msgid "Schematic Editor"
msgstr "Kretsschemaredigerare"
#: common/eda_base_frame.cpp:1047
msgid "Annotation Options"
msgstr "Numreringsinställningar"
#: common/eda_base_frame.cpp:1050
#: eeschema/dialogs/dialog_schematic_setup.cpp:77
msgid "Field Name Templates"
msgstr "Fältnamnsmallar"
#: common/eda_base_frame.cpp:1065 common/tool/actions.cpp:610
#: kicad/tools/kicad_manager_actions.cpp:98 pcbnew/footprint_edit_frame.cpp:914
#: pcbnew/menubar_footprint_editor.cpp:92
msgid "Footprint Editor"
msgstr "Fotavtrycksredigerare"
#: common/eda_base_frame.cpp:1069
#: pagelayout_editor/dialogs/properties_frame_base.cpp:465
msgid "Default Values"
msgstr "Ursprungliga värden"
#: common/eda_base_frame.cpp:1074 common/hotkey_store.cpp:74
#: kicad/tools/kicad_manager_actions.cpp:92 pcbnew/menubar_pcb_editor.cpp:185
#: pcbnew/pcb_edit_frame.cpp:182 pcbnew/pcb_edit_frame.cpp:1573
#: pcbnew/tools/zone_filler_tool.cpp:272
msgid "PCB Editor"
msgstr "Mönsterkortsredigerare"
#: common/eda_base_frame.cpp:1078
msgid "Action Plugins"
msgstr "Action Plugins"
#: common/eda_base_frame.cpp:1079
msgid "Origins & Axes"
msgstr "Origo & Koordinataxlar"
#: common/eda_base_frame.cpp:1085
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:171
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:301
#: eeschema/dialogs/dialog_schematic_setup.cpp:75
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:123
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:253
#: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:18
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:213
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:87
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:255
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:226
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558
msgid "General"
msgstr "Allmänt"
#: common/eda_base_frame.cpp:1086
msgid "Realtime Renderer"
msgstr "Realtidsrenderare"
#: common/eda_base_frame.cpp:1087
msgid "Raytracing Renderer"
msgstr "Strålföljningsrenderare"
#: common/eda_base_frame.cpp:1103 common/hotkey_store.cpp:77
#: gerbview/gerbview_frame.cpp:611 gerbview/gerbview_frame.cpp:635
#: gerbview/menubar.cpp:160 kicad/tools/kicad_manager_actions.cpp:104
msgid "Gerber Viewer"
msgstr "Gerber-visare"
#: common/eda_base_frame.cpp:1106
msgid "Excellon Options"
msgstr "Excellon-inställningar"
#: common/eda_base_frame.cpp:1120 common/hotkey_store.cpp:75
#: kicad/tools/kicad_manager_actions.cpp:121 pagelayout_editor/menubar.cpp:89
#: pagelayout_editor/pl_editor_frame.cpp:550
msgid "Drawing Sheet Editor"
msgstr "Ritningsarksredigerare"
#: common/eda_base_frame.cpp:1124 kicad/pcm/dialogs/dialog_pcm.cpp:204
#: kicad/tools/kicad_manager_actions.cpp:127
msgid "Plugin and Content Manager"
msgstr "Insticksmoduls- och innehålls-hanterare"
#: common/eda_base_frame.cpp:1208
#, c-format
msgid "Insufficient permissions to folder '%s'."
msgstr "Otillräckliga behörigheter till mappen '%s'."
#: common/eda_base_frame.cpp:1246
#, c-format
msgid ""
"Well this is potentially embarrassing!\n"
"It appears that the last time you were editing\n"
"%s\n"
"KiCad exited before saving.\n"
"\n"
"Do you wish to open the auto-saved file instead?"
msgstr ""
"Hoppsan, det här kan vara pinsamt!\n"
"Det verkar som att sist du redigerade\n"
"%s\n"
"avslutades KiCad innan filen sparades.\n"
"\n"
"Vill du öppna den senast automatsparade filen istället?"
#: common/eda_base_frame.cpp:1263
msgid "The auto save file could not be renamed to the board file name."
msgstr "Kunde inte byta namn på den autosparade filen till kortets filnamn."
#: common/eda_doc.cpp:130
msgid "Documentation File"
msgstr "Dokumentationsfil"
#: common/eda_doc.cpp:140
#, c-format
msgid "Documentation file '%s' not found."
msgstr "Dokumentationsfil '%s' hittades inte."
#: common/eda_doc.cpp:183
#, c-format
msgid "Unknown MIME type for documentation file '%s'"
msgstr "Okänd MIME-typ för dokumentationsfil '%s'"
#: common/eda_draw_frame.cpp:144 common/tool/actions.cpp:497
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:27
#: pagelayout_editor/pl_editor_frame.cpp:161
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:55
#: pcbnew/dialogs/dialog_gendrill_base.cpp:106
#: pcbnew/dialogs/dialog_plot_base.cpp:350
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:89
#: pcbnew/import_gfx/dialog_import_gfx.cpp:49
msgid "Inches"
msgstr "Tum"
#: common/eda_draw_frame.cpp:150 pagelayout_editor/pl_editor_frame.cpp:164
#: pcbnew/tools/drawing_tool.cpp:297 pcbnew/tools/edit_tool_move_fct.cpp:347
#: pcbnew/tools/pcb_actions.cpp:742
msgid "Constrain to H, V, 45"
msgstr "Begränsa till H, V, 45"
#: common/eda_draw_frame.cpp:365
msgid "Edit User Grid..."
msgstr "Redigera användarnät ..."
#: common/eda_draw_frame.cpp:517
msgid "Zoom Auto"
msgstr "Zoom Auto"
#: common/eda_draw_frame.cpp:526
#, c-format
msgid "Zoom %.2f"
msgstr "Zooma %.2f"
#: common/eda_draw_frame.cpp:617 pagelayout_editor/pl_editor_frame.cpp:735
msgid "inches"
msgstr "tum"
#: common/eda_draw_frame.cpp:618
#: eeschema/dialogs/dialog_junction_props_base.cpp:34
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:110
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:239
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:250
#: eeschema/dialogs/panel_setup_formatting_base.cpp:62
#: eeschema/dialogs/panel_setup_formatting_base.cpp:118
#: eeschema/dialogs/panel_setup_formatting_base.cpp:129
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:36
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:51
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:62
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:73
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:84
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:116
#: pagelayout_editor/pl_editor_frame.cpp:736
msgid "mils"
msgstr "mils (1/1000 tum)"
#: common/eda_draw_frame.cpp:620
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:57
#: pcbnew/footprint_wizard_frame.cpp:324 pcbnew/pcb_dimension.cpp:327
msgid "Units"
msgstr "Enheter"
#: common/eda_draw_frame.cpp:1050 eeschema/dialogs/panel_sym_lib_table.cpp:504
#: pcbnew/footprint_libraries_utils.cpp:1378
msgid "Select Library"
msgstr "Välj Bibliotek"
#: common/eda_draw_frame.cpp:1050
msgid "New Library"
msgstr "Nytt Bibliotek"
#: common/eda_item.cpp:323
msgid "Screen"
msgstr "Skärm"
#: common/eda_item.cpp:325 eeschema/dialogs/dialog_symbol_fields_table.cpp:1042
#: eeschema/sch_symbol.cpp:1632 pcbnew/build_BOM_from_board.cpp:110
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:136 pcbnew/fp_shape.cpp:116
#: pcbnew/fp_text.cpp:287 pcbnew/load_select_footprint.cpp:376
#: pcbnew/pad.cpp:951 pcbnew/plot_board_layers.cpp:97
msgid "Footprint"
msgstr "Fotavtryck"
#: common/eda_item.cpp:326 pcbnew/dialogs/dialog_board_statistics.cpp:501
#: pcbnew/pad.cpp:954
msgid "Pad"
msgstr "Lödyta"
#: common/eda_item.cpp:327 common/eda_item.cpp:333 common/eda_item.cpp:382
msgid "Graphic"
msgstr "Grafik"
#: common/eda_item.cpp:328 common/eda_item.cpp:361 eeschema/sch_bitmap.cpp:205
#: pcbnew/pcb_bitmap.cpp:209
msgid "Bitmap"
msgstr "Bitmapp"
#: common/eda_item.cpp:330 common/eda_item.cpp:332 common/eda_item.cpp:363
#: common/eda_item.cpp:384 eeschema/lib_textbox.cpp:468
#: eeschema/sch_textbox.cpp:447 pcbnew/fp_textbox.cpp:306
#: pcbnew/pcb_textbox.cpp:300
msgid "Text Box"
msgstr "Textruta"
#: common/eda_item.cpp:334 common/eda_item.cpp:335 common/eda_item.cpp:336
#: common/eda_item.cpp:337 common/eda_item.cpp:344 common/eda_item.cpp:345
#: common/eda_item.cpp:346 common/eda_item.cpp:347 pcbnew/pcb_dimension.cpp:296
msgid "Dimension"
msgstr "Måttsättning"
#: common/eda_item.cpp:338 common/eda_item.cpp:348 pcbnew/pcb_dimension.cpp:962
#: pcbnew/pcb_dimension.cpp:1082
msgid "Leader"
msgstr "Ledare"
#: common/eda_item.cpp:339 common/eda_item.cpp:350
#: pcbnew/tools/board_inspection_tool.cpp:634
msgid "Zone"
msgstr "Zon"
#: common/eda_item.cpp:340 common/eda_item.cpp:341 pcbnew/pcb_track.cpp:824
msgid "Track"
msgstr "Ledare"
#: common/eda_item.cpp:342 pcbnew/dialogs/dialog_board_statistics.cpp:501
#: pcbnew/pcb_track.cpp:904
msgid "Via"
msgstr "via"
#: common/eda_item.cpp:343 common/eda_item.cpp:355 pcbnew/pcb_marker.cpp:193
msgid "Marker"
msgstr "Markör"
#: common/eda_item.cpp:349 pcbnew/pcb_target.cpp:125
msgid "Target"
msgstr "Mål"
#: common/eda_item.cpp:351
msgid "ItemList"
msgstr "Komponentlista"
#: common/eda_item.cpp:352
msgid "NetInfo"
msgstr "Nätinfo"
#: common/eda_item.cpp:353 pcbnew/pcb_group.cpp:399
#: pcbnew/tools/pcb_actions.cpp:758
msgid "Group"
msgstr "Grupp"
#: common/eda_item.cpp:356 eeschema/sch_junction.h:97
msgid "Junction"
msgstr "Knutpunkt"
#: common/eda_item.cpp:357
msgid "No-Connect Flag"
msgstr "\"Ingen anslutning\"-flagga"
#: common/eda_item.cpp:358
msgid "Wire Entry"
msgstr "Trådanslutning"
#: common/eda_item.cpp:359
msgid "Bus Entry"
msgstr "Bussanslutning"
#: common/eda_item.cpp:364
msgid "Net Label"
msgstr "Nätetikett"
#: common/eda_item.cpp:365 eeschema/sch_label.cpp:868
#: eeschema/sch_label.cpp:1237
msgid "Directive Label"
msgstr "Direktivetikett"
#: common/eda_item.cpp:366 eeschema/sch_label.cpp:869
msgid "Global Label"
msgstr "Global etikett"
#: common/eda_item.cpp:367 eeschema/sch_label.cpp:870
msgid "Hierarchical Label"
msgstr "Hierarkisk etikett"
#: common/eda_item.cpp:368 eeschema/dialogs/dialog_symbol_fields_table.cpp:766
#: eeschema/lib_field.cpp:529 eeschema/lib_field.h:78
#: eeschema/sch_label.cpp:190
msgid "Field"
msgstr "Fält"
#: common/eda_item.cpp:369 common/eda_item.cpp:381
#: eeschema/symbol_editor/symbol_editor.cpp:1245
msgid "Symbol"
msgstr "Symbol"
#: common/eda_item.cpp:370 common/eda_item.cpp:385
#: eeschema/dialogs/dialog_sim_model.cpp:554 eeschema/lib_pin.h:71
#: eeschema/sch_pin.cpp:206
msgid "Pin"
msgstr "Ben"
#: common/eda_item.cpp:371
msgid "Sheet Pin"
msgstr "Stift (Blad)"
#: common/eda_item.cpp:372 eeschema/dialogs/dialog_migrate_buses.cpp:103
#: pcbnew/tools/pcb_actions.cpp:1360
msgid "Sheet"
msgstr "Blad"
#: common/eda_item.cpp:379
msgid "SCH Screen"
msgstr "SCH-Skärm"
#: common/eda_item.cpp:386 eeschema/sch_field.cpp:761
msgid "Symbol Field"
msgstr "Symbolfält"
#: common/eda_item.cpp:388
msgid "Gerber Layout"
msgstr "Gerber-layout"
#: common/eda_item.cpp:389
msgid "Draw Item"
msgstr "Rita Komponent"
#: common/eda_shape.cpp:60
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:159
msgid "Number Box"
msgstr "Nummerruta"
#: common/eda_shape.cpp:65 pcbnew/pad.cpp:1206
msgid "Rect"
msgstr "Rätt"
#: common/eda_shape.cpp:66 common/eda_shape.cpp:616 common/eda_shape.cpp:1676
#: gerbview/gerber_draw_item.cpp:213
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:110
#: pcbnew/dialogs/dialog_pad_properties.cpp:715
#: pcbnew/dialogs/dialog_pad_properties.cpp:2162
msgid "Arc"
msgstr "Båge"
#: common/eda_shape.cpp:67 common/eda_shape.cpp:615 common/eda_shape.cpp:1677
#: eeschema/dialogs/dialog_label_properties_base.cpp:170
#: gerbview/gerber_draw_item.cpp:214
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:134
#: pcbnew/dialogs/dialog_pad_properties.cpp:725 pcbnew/pad.cpp:1204
#: pcbnew/pad.cpp:1696
msgid "Circle"
msgstr "Cirkel"
#: common/eda_shape.cpp:68
msgid "Bezier Curve"
msgstr "Bezier-kurva"
#: common/eda_shape.cpp:69 common/eda_shape.cpp:618 common/eda_shape.cpp:1678
#: pcbnew/dialogs/dialog_pad_properties.cpp:733
#: pcbnew/dialogs/dialog_pad_properties.cpp:2165
msgid "Polygon"
msgstr "Polygon"
#: common/eda_shape.cpp:617
msgid "Curve"
msgstr "Kurva"
#: common/eda_shape.cpp:619
msgid "Pad Number Box"
msgstr "Ruta för lödytenummer"
#: common/eda_shape.cpp:620 common/eda_shape.cpp:1674
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:78
#: pcbnew/dialogs/dialog_pad_properties.cpp:703
#: pcbnew/dialogs/dialog_pad_properties.cpp:2161
msgid "Segment"
msgstr "Segment"
#: common/eda_shape.cpp:621
msgid "Unrecognized"
msgstr "Okänd"
#: common/eda_shape.cpp:631 common/eda_shape.cpp:1690
#: eeschema/dialogs/dialog_label_properties_base.cpp:150
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:53
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:232
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:120
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:44
#: pcbnew/microwave/microwave_polygon.cpp:130 pcbnew/pad.cpp:1755
#: pcbnew/pcb_target.cpp:157 pcbnew/pcb_target.cpp:204
#: pcbnew/pcb_textbox.cpp:528
msgid "Shape"
msgstr "Form"
#: common/eda_shape.cpp:637 common/eda_shape.cpp:644
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:213
#: pcbnew/pcb_track.cpp:844
msgid "Radius"
msgstr "Radie"
#: common/eda_shape.cpp:642 common/eda_shape.cpp:672 common/eda_shape.cpp:1709
#: pcbnew/fp_text.cpp:307 pcbnew/fp_textbox.cpp:313 pcbnew/pcb_text.cpp:140
#: pcbnew/pcb_textbox.cpp:307
msgid "Angle"
msgstr "Vinkel"
#: common/eda_shape.cpp:648 common/eda_shape.cpp:666
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:127
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:95
#: eeschema/lib_pin.cpp:1153 eeschema/sch_pin.cpp:224
msgid "Length"
msgstr "Längd"
#: common/eda_shape.cpp:653
msgid "Points"
msgstr "Punkter"
#: common/eda_shape.cpp:657 common/eda_text.cpp:1060
#: eeschema/sch_bitmap.cpp:207 pcbnew/dialogs/dialog_board_statistics.cpp:671
#: pcbnew/dialogs/dialog_board_statistics.cpp:681
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:55
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:55
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:42
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:161
#: pcbnew/fp_text.cpp:311 pcbnew/fp_text_grid_table.cpp:102 pcbnew/pad.cpp:1002
#: pcbnew/pcb_bitmap.cpp:211 pcbnew/pcb_target.cpp:156
#: pcbnew/pcb_target.cpp:201 pcbnew/pcb_text.cpp:144 pcbnew/pcb_track.cpp:839
#: pcbnew/pcb_track.cpp:1245 pcbnew/pcb_track.cpp:1275
msgid "Width"
msgstr "Bredd"
#: common/eda_shape.cpp:660 common/eda_text.cpp:1065
#: eeschema/sch_bitmap.cpp:208 pcbnew/dialogs/dialog_board_statistics.cpp:673
#: pcbnew/dialogs/dialog_board_statistics.cpp:682
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:56
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:56
#: pcbnew/fp_text.cpp:312 pcbnew/fp_text_grid_table.cpp:103 pcbnew/pad.cpp:1003
#: pcbnew/pcb_bitmap.cpp:212 pcbnew/pcb_dimension.cpp:736
#: pcbnew/pcb_text.cpp:145
msgid "Height"
msgstr "Höjd"
#: common/eda_shape.cpp:1679
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:96
#: pcbnew/dialogs/dialog_pad_properties.cpp:709
#: pcbnew/dialogs/dialog_pad_properties.cpp:2163
msgid "Bezier"
msgstr "Bezier"
#: common/eda_shape.cpp:1693 pcbnew/pcb_textbox.cpp:529
#: pcbnew/pcb_track.cpp:1248
msgid "Start X"
msgstr "Start X"
#: common/eda_shape.cpp:1696 pcbnew/pcb_textbox.cpp:530
#: pcbnew/pcb_track.cpp:1252
msgid "Start Y"
msgstr "Start Y"
#: common/eda_shape.cpp:1699 pcbnew/pcb_textbox.cpp:531
#: pcbnew/pcb_track.cpp:1255
msgid "End X"
msgstr "Avsluta X"
#: common/eda_shape.cpp:1702 pcbnew/pcb_textbox.cpp:532
#: pcbnew/pcb_track.cpp:1258
msgid "End Y"
msgstr "Avsluta Y"
#: common/eda_shape.cpp:1706 common/stroke_params.cpp:214
#: pcbnew/pcb_textbox.cpp:533
msgid "Line Width"
msgstr "Linjebredd"
#: common/eda_shape.cpp:1719 pcbnew/dialogs/dialog_plot_base.cpp:132
msgid "Filled"
msgstr "Fylld"
#: common/eda_text.cpp:747 eeschema/lib_textbox.cpp:472
#: eeschema/sch_label.cpp:884 eeschema/sch_text.cpp:506
#: eeschema/sch_textbox.cpp:451 eeschema/symbol_editor/symbol_editor.cpp:1238
#: gerbview/gerber_file_image.cpp:338 gerbview/gerber_file_image.cpp:342
#: gerbview/gerber_file_image.cpp:345
#: pcbnew/microwave/microwave_polygon.cpp:128
#: pcbnew/widgets/appearance_controls.cpp:633
#: pcbnew/widgets/appearance_controls.cpp:1756
msgid "Normal"
msgstr "Normal"
#: common/eda_text.cpp:748 common/eda_text.cpp:1045
#: eeschema/dialogs/dialog_field_properties_base.cpp:142
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:233
#: eeschema/dialogs/dialog_label_properties_base.cpp:91
#: eeschema/dialogs/dialog_label_properties_base.cpp:212
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:63
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:106
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:89
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:105
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:65
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:60
#: eeschema/dialogs/dialog_text_properties_base.cpp:109
#: eeschema/fields_grid_table.cpp:344 eeschema/lib_textbox.cpp:472
#: eeschema/sch_label.cpp:884 eeschema/sch_text.cpp:506
#: eeschema/sch_textbox.cpp:451
#: pagelayout_editor/dialogs/properties_frame_base.cpp:97
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:58
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:58
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:288
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:205
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:127
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:48
#: pcbnew/fp_text_grid_table.cpp:105
msgid "Italic"
msgstr "Kursiv"
#: common/eda_text.cpp:749 common/eda_text.cpp:1049
#: eeschema/dialogs/dialog_field_properties_base.cpp:137
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:211
#: eeschema/dialogs/dialog_label_properties_base.cpp:92
#: eeschema/dialogs/dialog_label_properties_base.cpp:207
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:64
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:101
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:84
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:100
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:66
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:61
#: eeschema/dialogs/dialog_text_properties_base.cpp:104
#: eeschema/fields_grid_table.cpp:345 eeschema/lib_textbox.cpp:472
#: eeschema/sch_label.cpp:884 eeschema/sch_text.cpp:506
#: eeschema/sch_textbox.cpp:451
#: pagelayout_editor/dialogs/properties_frame_base.cpp:92
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:186
msgid "Bold"
msgstr "Fet"
#: common/eda_text.cpp:750
msgid "Bold+Italic"
msgstr "Fet+Kursiv"
#: common/eda_text.cpp:1015
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:221
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:261
#: eeschema/fields_grid_table.cpp:244 eeschema/fields_grid_table.cpp:584
#: eeschema/fields_grid_table.cpp:729 eeschema/lib_field.cpp:544
#: eeschema/lib_text.cpp:408 eeschema/pin_type.cpp:128
#: eeschema/sch_field.cpp:776
msgid "Left"
msgstr "Vänster"
#: common/eda_text.cpp:1016 common/eda_text.cpp:1020
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:261
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:285
#: eeschema/fields_grid_table.cpp:237 eeschema/fields_grid_table.cpp:245
#: eeschema/fields_grid_table.cpp:585 eeschema/fields_grid_table.cpp:595
#: eeschema/fields_grid_table.cpp:731 eeschema/fields_grid_table.cpp:743
#: eeschema/lib_field.cpp:545 eeschema/lib_field.cpp:554
#: eeschema/lib_text.cpp:409 eeschema/lib_text.cpp:418
#: eeschema/sch_field.cpp:777 eeschema/sch_field.cpp:786
#: gerbview/gerber_file_image.cpp:342 gerbview/gerber_file_image.cpp:345
msgid "Center"
msgstr "Centrera"
#: common/eda_text.cpp:1017
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:221
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:261
#: eeschema/fields_grid_table.cpp:246 eeschema/fields_grid_table.cpp:586
#: eeschema/fields_grid_table.cpp:733 eeschema/lib_field.cpp:546
#: eeschema/lib_text.cpp:410 eeschema/pin_type.cpp:127
#: eeschema/sch_field.cpp:778
msgid "Right"
msgstr "Höger"
#: common/eda_text.cpp:1019
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:285
#: eeschema/fields_grid_table.cpp:236 eeschema/fields_grid_table.cpp:594
#: eeschema/fields_grid_table.cpp:741 eeschema/lib_field.cpp:553
#: eeschema/lib_text.cpp:417 eeschema/sch_field.cpp:785
msgid "Top"
msgstr "Överst"
#: common/eda_text.cpp:1021
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:285
#: eeschema/fields_grid_table.cpp:238 eeschema/fields_grid_table.cpp:596
#: eeschema/fields_grid_table.cpp:745 eeschema/lib_field.cpp:555
#: eeschema/lib_text.cpp:419 eeschema/sch_field.cpp:787
msgid "Bottom"
msgstr "Nederst"
#: common/eda_text.cpp:1026
#: eeschema/dialogs/dialog_label_properties_base.cpp:94
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:124
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:92
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:66
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:68
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:63
#: eeschema/fields_grid_table.cpp:347 eeschema/lib_pin.cpp:1156
#: eeschema/sch_pin.cpp:227
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:60
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:60
#: pcbnew/footprint.cpp:2865 pcbnew/fp_text_grid_table.cpp:107
#: pcbnew/pad.cpp:1731 pcbnew/zone.cpp:1440
msgid "Orientation"
msgstr "Orientering"
#: common/eda_text.cpp:1030 eeschema/dialogs/dialog_text_properties_base.h:114
#: pcbnew/dialogs/dialog_text_properties.cpp:104
#: pcbnew/dialogs/dialog_text_properties_base.h:110 pcbnew/pcb_text.cpp:347
msgid "Text Properties"
msgstr "Textegenskaper"
#: common/eda_text.cpp:1036 pcbnew/pcb_text.cpp:362
msgid "Hyperlink"
msgstr "Hyperlänk"
#: common/eda_text.cpp:1040
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:90
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:57
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:57
#: pcbnew/fp_text.cpp:310 pcbnew/fp_text_grid_table.cpp:104
#: pcbnew/fp_textbox.cpp:316 pcbnew/pcb_text.cpp:143
msgid "Thickness"
msgstr "Tjocklek"
#: common/eda_text.cpp:1052 pcbnew/microwave/microwave_polygon.cpp:128
msgid "Mirrored"
msgstr "Spegelvänd"
#: common/eda_text.cpp:1056
#: eeschema/dialogs/dialog_field_properties_base.cpp:87
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:274
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:130
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:98
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:48
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:98
#: eeschema/dialogs/panel_template_fieldnames_base.cpp:44
#: eeschema/lib_field.cpp:534 eeschema/sch_field.cpp:766
#: eeschema/sch_pin.cpp:222 include/lib_table_grid.h:194
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:134
#: pcbnew/dialogs/dialog_text_properties_base.cpp:87
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:48
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:97 pcbnew/pcb_text.cpp:359
msgid "Visible"
msgstr "Synlig"
#: common/eda_text.cpp:1071
msgid "Horizontal Justification"
msgstr "Horisontell Justering"
#: common/eda_text.cpp:1076
msgid "Vertical Justification"
msgstr "Vertikal Justering"
#: common/env_vars.cpp:71
msgid ""
"The base path of locally installed system footprint libraries (.pretty "
"folders)."
msgstr ""
"Grundsökvägen för lokalt installerade bibliotek av systemfotavtryck (.pretty "
"folders)."
#: common/env_vars.cpp:74
msgid "The base path of system footprint 3D shapes (.3Dshapes folders)."
msgstr "Grundsökvägen för 3D-former för systemfotavtryck (.3Dshapes mappar)."
#: common/env_vars.cpp:76
msgid "The base path of the locally installed symbol libraries."
msgstr "Grundsökvägen för de lokalt installerade symbolbiblioteken."
#: common/env_vars.cpp:78
msgid "A directory containing project templates installed with KiCad."
msgstr "En katalog som innehåller projektmallar installerade med KiCad."
#: common/env_vars.cpp:80
msgid ""
"Optional. Can be defined if you want to create your own project templates "
"folder."
msgstr ""
"Frivillig. Kan definieras om du vill skapa din egen mapp för projektmallar."
#: common/env_vars.cpp:83
msgid ""
"A directory containing 3rd party plugins, libraries and other downloadable "
"content."
msgstr ""
"En katalog med tredjeparts insticksmoduler, bibliotek och annat "
"nedladdningsbart innehåll."
#: common/env_vars.cpp:86
msgid ""
"Internally defined by KiCad (cannot be edited) and is set to the absolute "
"path of the currently loaded project file. This environment variable can be "
"used to define files and paths relative to the currently loaded project. "
"For instance, ${KIPRJMOD}/libs/footprints.pretty can be defined as a folder "
"containing a project specific footprint library named footprints.pretty."
msgstr ""
"Internt definierad av KiCad (kan inte redigeras) och är inställd på den "
"absoluta sökvägen för den för närvarande laddade projektfilen. Denna "
"miljövariabel kan användas för att definiera filer och sökvägar i "
"förhållande till det för närvarande laddade projektet. Exempelvis kan $ "
"{KIPRJMOD} /libs/footprints.pretty definieras som en mapp som innehåller ett "
"projektspecifikt fotavtrycksbibliotek med namnet footprints.pretty."
#: common/env_vars.cpp:92
msgid "A directory containing system-wide scripts installed with KiCad"
msgstr ""
"En katalog som innehåller systemomfattande skript installerade med KiCad"
#: common/env_vars.cpp:94
msgid "A directory containing user-specific scripts installed with KiCad"
msgstr ""
"En katalog som innehåller användarspecifika skript installerade med KiCad"
#: common/env_vars.cpp:98
msgid "Deprecated version of KICAD_TEMPLATE_DIR."
msgstr "Föråldrad version av KICAD_TEMPLATE_DIR."
#: common/env_vars.cpp:100
msgid "Deprecated version of KICAD6_3DMODEL_DIR."
msgstr "Föråldrad version av KICAD6_3DMODEL_DIR."
#: common/env_vars.cpp:102
msgid "Deprecated version of KICAD6_FOOTPRINT_DIR."
msgstr "Föråldrad version av KICAD6_FOOTPRINT_DIR."
#: common/env_vars.cpp:104
msgid "Deprecated version of KICAD_SYMBOL_DIR."
msgstr "Föråldrad version av KICAD_SYMBOL_DIR."
#: common/exceptions.cpp:62
#, c-format
msgid "from %s : %s() line %d"
msgstr "från %s: %s () rad %d"
#: common/exceptions.cpp:76
#, c-format
msgid "%s in '%s', line %d, offset %d."
msgstr "%s i '%s', rad %d, offset %d."
#: common/exceptions.cpp:90
#, c-format
msgid "from %s : %s() line:%d"
msgstr "från %s: %s() rad:%d"
#: common/exceptions.cpp:101
#, c-format
msgid ""
"KiCad was unable to open this file because it was created with a more recent "
"version than the one you are running.\n"
"\n"
"To open it you will need to upgrade KiCad to a version dated %s or later."
msgstr ""
"KiCad kunde inte öppna den här filen eftersom den skapades med en nyare "
"version än den du kör.\n"
"\n"
"För att öppna den måste du uppgradera KiCad till en version daterad %s eller "
"senare."
#: common/exceptions.cpp:126
msgid "Full error text:"
msgstr "Hela feltexten:"
#: common/file_history.cpp:155
msgid "No Files"
msgstr "Inga Filer"
#: common/filename_resolver.cpp:453
msgid "The given path does not exist"
msgstr "Den angivna sökvägen finns inte"
#: common/filename_resolver.cpp:456
msgid "3D model search path"
msgstr "Sökväg för 3D-modell"
#: common/filename_resolver.cpp:481
msgid "Alias: "
msgstr "Alias: "
#: common/filename_resolver.cpp:484
msgid "This path:"
msgstr "Denna sökväg:"
#: common/filename_resolver.cpp:487
msgid "Existing path:"
msgstr "Befintlig sökväg:"
#: common/filename_resolver.cpp:489
msgid "Bad alias (duplicate name)"
msgstr "Dåligt alias (dubblettnamn)"
#: common/font/font.cpp:90 common/widgets/font_choice.cpp:47
#: eeschema/dialogs/dialog_field_properties_base.cpp:122
#: eeschema/dialogs/dialog_label_properties_base.cpp:193
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:71
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:69
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:85
#: eeschema/dialogs/dialog_text_properties_base.cpp:89
#: eeschema/fields_grid_table.cpp:58
#: pagelayout_editor/dialogs/properties_frame_base.cpp:154
msgid "Default Font"
msgstr "Standardtypsnitt"
#: common/font/fontconfig.cpp:118
#, c-format
msgid "Error loading font '%s'."
msgstr "Fel vid inläsning av typsnitt '%s'."
#: common/font/fontconfig.cpp:120
#, c-format
msgid "Font '%s' not found; substituting '%s'."
msgstr "Typsnitt '%s' hittades inte; ersätts med '%s'."
#: common/footprint_info.cpp:99 cvpcb/cvpcb_mainframe.cpp:978
#: eeschema/symbol_library_manager.cpp:81
#: eeschema/symbol_tree_model_adapter.cpp:105
msgid "Load Error"
msgstr "Fel vid Laddning"
#: common/footprint_info.cpp:101
msgid "Errors were encountered loading footprints:"
msgstr "Fel uppstod vid laddning av fotavtryck:"
#: common/fp_lib_table.cpp:202
#, c-format
msgid ""
"Duplicate library nickname '%s' found in footprint library table file line "
"%d."
msgstr ""
"Dubblett av bibliotekets smeknamn '%s' hittades i "
"fotavtrycksbibliotekstabellfilen, rad %d."
#: common/fp_lib_table.cpp:302
#, c-format
msgid "fp-lib-table files contain no library named '%s'."
msgstr "fp-lib-tabellfiler innehåller inget bibliotek med namnet '%s'."
#: common/fp_lib_table.cpp:529 eeschema/symbol_lib_table.cpp:572
msgid "Added by Plugin and Content Manager"
msgstr "Tillagd via insticksmoduls- och innehålls-hanteraren"
#: common/fp_lib_table.cpp:555 eeschema/symbol_lib_table.cpp:600
#, c-format
msgid "Cannot create global library table path '%s'."
msgstr "Kan inte skapa global sökväg '%s' för bibliotekstabellen."
#: common/gestfich.cpp:153
#, c-format
msgid "Command '%s' could not be found."
msgstr "Kommandot '%s' kunde inte hittas."
#: common/gestfich.cpp:170
#, c-format
msgid "Unable to find a PDF viewer for '%s'."
msgstr "Det gick inte att hitta en PDF-visare för '%s'."
#: common/gestfich.cpp:185
#, c-format
msgid "Problem while running the PDF viewer '%s'."
msgstr "Problem under körning av PDF-visaren '%s'."
#: common/gestfich.cpp:223 eeschema/eeschema.cpp:521 eeschema/eeschema.cpp:554
#: gerbview/gerbview.cpp:245 kicad/project_template.cpp:279
#: pcbnew/pcbnew.cpp:474
#, c-format
msgid "Cannot copy file '%s'."
msgstr "Kan inte kopiera filen '%s'."
#: common/grid_tricks.cpp:325 common/tool/actions.cpp:153
#: eeschema/tools/ee_actions.cpp:157 pcbnew/dialogs/panel_setup_rules.cpp:111
#: pcbnew/tools/edit_tool.cpp:1981
msgid "Cut"
msgstr "Klipp ut"
#: common/grid_tricks.cpp:326
msgid "Clear selected cells placing original contents on clipboard"
msgstr "Rensa markerade celler och placera originalinnehållet i urklipp"
#: common/grid_tricks.cpp:327 common/tool/actions.cpp:159
#: eeschema/tools/ee_actions.cpp:162 pcbnew/dialogs/panel_setup_rules.cpp:112
msgid "Copy"
msgstr "Kopiera"
#: common/grid_tricks.cpp:328
msgid "Copy selected cells to clipboard"
msgstr "Kopiera valda celler till urklipp"
#: common/grid_tricks.cpp:329 common/tool/actions.cpp:165
#: pcbnew/dialogs/panel_setup_rules.cpp:113
msgid "Paste"
msgstr "Klistra In"
#: common/grid_tricks.cpp:330
msgid "Paste clipboard cells to matrix at current cell"
msgstr "Klistra in urklippsceller i matris vid aktuell cell"
#: common/grid_tricks.cpp:331 common/tool/actions.cpp:192
#: kicad/project_tree_pane.cpp:762 pcbnew/dialogs/panel_setup_rules.cpp:114
#: pcbnew/plugins/kicad/pcb_parser.cpp:923 pcbnew/tools/edit_tool.cpp:1983
msgid "Delete"
msgstr "Radera"
#: common/grid_tricks.cpp:331
msgid "Delete selected cells"
msgstr "Radera markerade celler"
#: common/grid_tricks.cpp:332 common/tool/actions.cpp:171
#: eeschema/dialogs/dialog_change_symbols_base.cpp:105
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:68
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:47
#: pcbnew/dialogs/dialog_import_settings.cpp:49
#: pcbnew/dialogs/dialog_import_settings.cpp:97
#: pcbnew/dialogs/dialog_import_settings_base.cpp:86
#: pcbnew/dialogs/panel_setup_rules.cpp:118
msgid "Select All"
msgstr "Markera Allt"
#: common/grid_tricks.cpp:332
msgid "Select all cells"
msgstr "Markera alla celler"
#: common/hotkey_store.cpp:43
msgid "Pan Left/Right"
msgstr "Panorera Vänster/Höger"
#: common/hotkey_store.cpp:44
msgid "Pan Up/Down"
msgstr "Panorera Upp/Ner"
#: common/hotkey_store.cpp:45 eeschema/tools/ee_actions.cpp:263
msgid "Finish Drawing"
msgstr "Sluta Rita"
#: common/hotkey_store.cpp:46
msgid "Add to Selection"
msgstr "Lägg till i Markering"
#: common/hotkey_store.cpp:47 eeschema/tools/ee_actions.cpp:577
#: gerbview/tools/gerbview_actions.cpp:119 pcbnew/tools/pcb_actions.cpp:790
#: pcbnew/tools/pcb_actions.cpp:810
msgid "Highlight Net"
msgstr "Markera Net"
#: common/hotkey_store.cpp:48
msgid "Remove from Selection"
msgstr "Ta Bort från Markering"
#: common/hotkey_store.cpp:49
msgid "Ignore Grid Snaps"
msgstr "Ignorera Rutnätssnäpp"
#: common/hotkey_store.cpp:50
msgid "Ignore Other Snaps"
msgstr "Ignorera Andra Snäppen"
#: common/hotkey_store.cpp:72
msgid "Project Manager"
msgstr "Projekthanterare"
#: common/hotkey_store.cpp:152
msgid "Gestures"
msgstr "Gester"
#: common/kiway.cpp:239
#, c-format
msgid "Failed to verify kiface library '%s' signature."
msgstr "Kunde inte verifiera signatur för kiface-biblioteket '%s'."
#: common/kiway.cpp:268
#, c-format
msgid "Failed to load kiface library '%s'."
msgstr "Fel vid inläsning av kiface-biblioteket '%s'."
#: common/kiway.cpp:276
#, c-format
msgid "Could not read instance name and version from kiface library '%s'."
msgstr ""
"Det gick inte att läsa instansnamn och version från kiface-biblioteket '%s'."
#: common/kiway.cpp:309
#, c-format
msgid ""
"Fatal Installation Bug. File:\n"
"'%s'\n"
"could not be loaded\n"
msgstr ""
"Fatal Installationsbugg. Fil:\n"
"'%s'\n"
"kunde inte laddas\n"
#: common/kiway.cpp:313
msgid "It is missing.\n"
msgstr "Den saknas.\n"
#: common/kiway.cpp:315
msgid "Perhaps a shared library (.dll or .so) file is missing.\n"
msgstr "Kanske saknas ett programbibliotek (.dll eller .so).\n"
#: common/kiway.cpp:317
msgid ""
"From command line: argv[0]:\n"
"'"
msgstr ""
"Från kommandoraden: argv [0]:\n"
"'"
#: common/kiway.cpp:434 common/kiway.cpp:438 common/kiway.cpp:442
msgid "Error loading editor."
msgstr "Fel vid inläsning av redigeraren."
#: common/kiway.cpp:538
#, c-format
msgid "Unable to switch language to %s"
msgstr "Det går inte att byta språk till %s"
#: common/languages_menu.cpp:48
msgid "Set Language"
msgstr "Välj Språk"
#: common/layer_id.cpp:104 pcbnew/plugins/kicad/pcb_parser.cpp:923
msgid "Rescue"
msgstr "Rädda"
#: common/layer_id.cpp:108
msgid "Wires"
msgstr "Trådar"
#: common/layer_id.cpp:109
msgid "Buses"
msgstr "Bussar"
#: common/layer_id.cpp:110
msgid "Bus junctions"
msgstr "Bussknutpunkter"
#: common/layer_id.cpp:111
msgid "Junctions"
msgstr "Knutpunkter"
#: common/layer_id.cpp:112
msgid "Labels"
msgstr "Etiketter"
#: common/layer_id.cpp:113
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:45
msgid "Global labels"
msgstr "Globala etiketter"
#: common/layer_id.cpp:114
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:48
msgid "Hierarchical labels"
msgstr "Hierarkiska etiketter"
#: common/layer_id.cpp:115
msgid "Pin numbers"
msgstr "Stiftnummer"
#: common/layer_id.cpp:116
msgid "Pin names"
msgstr "Stiftnamn"
#: common/layer_id.cpp:117
msgid "Symbol references"
msgstr "Symbolreferenser"
#: common/layer_id.cpp:118
msgid "Symbol values"
msgstr "Symbolvärden"
#: common/layer_id.cpp:119
msgid "Symbol fields"
msgstr "Symbolfält"
#: common/layer_id.cpp:120
msgid "Sheet references"
msgstr "Ritningsarksreferenser"
#: common/layer_id.cpp:121
msgid "Net class references"
msgstr "Nätklassreferenser"
#: common/layer_id.cpp:122
msgid "Symbol body outlines"
msgstr "Symbolkroppskonturer"
#: common/layer_id.cpp:123
msgid "Symbol body fills"
msgstr "Symbolkroppsfyllningar"
#: common/layer_id.cpp:124
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:69
msgid "Schematic text && graphics"
msgstr "Kretsschemats text && grafik"
#: common/layer_id.cpp:125
msgid "Symbol private text && graphics"
msgstr "Symbolens enskilda text && grafik"
#: common/layer_id.cpp:126
msgid "Schematic text && graphics backgrounds"
msgstr "Bakgrund för text && grafik i kretsschema"
#: common/layer_id.cpp:127
msgid "Pins"
msgstr "Stift"
#: common/layer_id.cpp:128
msgid "Sheet borders"
msgstr "Arkkontur"
#: common/layer_id.cpp:129
msgid "Sheet backgrounds"
msgstr "Arkbakgrunder"
#: common/layer_id.cpp:130
msgid "Sheet names"
msgstr "Arknamn"
#: common/layer_id.cpp:131
msgid "Sheet fields"
msgstr "Arkfält"
#: common/layer_id.cpp:132
msgid "Sheet file names"
msgstr "Namn på arkfiler"
#: common/layer_id.cpp:133
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:60
msgid "Sheet pins"
msgstr "Arkstift"
#: common/layer_id.cpp:134
msgid "No-connect symbols"
msgstr "Ingen anslutning-symboler"
#: common/layer_id.cpp:135
msgid "ERC warnings"
msgstr "ERC-varningar"
#: common/layer_id.cpp:136
msgid "ERC errors"
msgstr "ERC-fel"
#: common/layer_id.cpp:137
msgid "ERC exclusions"
msgstr "ERC-undantag"
#: common/layer_id.cpp:138 common/layer_id.cpp:176
#: pcbnew/widgets/appearance_controls.cpp:351
msgid "Anchors"
msgstr "Ankare"
#: common/layer_id.cpp:139 common/layer_id.cpp:180
msgid "Helper items"
msgstr "Hjälpelement"
#: common/layer_id.cpp:140 common/layer_id.cpp:181 common/tool/grid_menu.cpp:64
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:102
#: gerbview/widgets/gerbview_layer_widget.cpp:135
#: pcbnew/widgets/appearance_controls.cpp:354
msgid "Grid"
msgstr "Rutnät"
#: common/layer_id.cpp:141
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:103
msgid "Axes"
msgstr "Axlar"
#: common/layer_id.cpp:142 common/layer_id.cpp:183
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:106
#: gerbview/widgets/gerbview_layer_widget.cpp:141
msgid "Background"
msgstr "Bakgrund"
#: common/layer_id.cpp:143 common/layer_id.cpp:179
msgid "Cursor"
msgstr "Muspekare"
#: common/layer_id.cpp:144
msgid "Hovered items"
msgstr "Svävande objekt"
#: common/layer_id.cpp:145
msgid "Highlighted items"
msgstr "Markerade objekt"
#: common/layer_id.cpp:146
msgid "Hidden items"
msgstr "Dolda objekt"
#: common/layer_id.cpp:147 common/layer_id.cpp:184
msgid "Selection highlight"
msgstr "Markering"
#: common/layer_id.cpp:148 common/layer_id.cpp:177
msgid "Drawing sheet"
msgstr "Ritningsarkets ram och namnruta"
#: common/layer_id.cpp:149 common/layer_id.cpp:178
msgid "Page limits"
msgstr "Ritningspapprets kontur"
#: common/layer_id.cpp:153
msgid "Footprints front"
msgstr "Fotavtryck fram"
#: common/layer_id.cpp:154
msgid "Footprints back"
msgstr "Fotavtryck bak"
#: common/layer_id.cpp:155
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:30
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:64
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:110
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:31
#: pcbnew/widgets/appearance_controls.cpp:341
msgid "Values"
msgstr "Värden"
#: common/layer_id.cpp:156
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:27
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:53
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:28
msgid "Reference designators"
msgstr "Referensbeteckningar"
#: common/layer_id.cpp:157
msgid "Footprint text"
msgstr "Fotavtryckstext"
#: common/layer_id.cpp:158
msgid "Hidden text"
msgstr "Dold text"
#: common/layer_id.cpp:159
msgid "SMD pads front"
msgstr "Lödytor fram"
#: common/layer_id.cpp:160
msgid "SMD pads back"
msgstr "Lödytor bak"
#: common/layer_id.cpp:161
msgid "Through-hole pads"
msgstr "Kragar"
#: common/layer_id.cpp:162
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:27
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:52
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:28
#: pcbnew/widgets/appearance_controls.cpp:332
#: pcbnew/widgets/panel_selection_filter.cpp:188
#: pcbnew/widgets/panel_selection_filter_base.cpp:37
msgid "Tracks"
msgstr "Ledare"
#: common/layer_id.cpp:163
msgid "Through vias"
msgstr "Genomgående vior"
#: common/layer_id.cpp:164
msgid "Blind/Buried vias"
msgstr "Blinda/begravda vior"
#: common/layer_id.cpp:165
msgid "Micro-vias"
msgstr "Mikrovior"
#: common/layer_id.cpp:166
msgid "Via holes"
msgstr "Viahål"
#: common/layer_id.cpp:167
msgid "Via hole walls"
msgstr "Viahålsväggar"
#: common/layer_id.cpp:168
msgid "Plated holes"
msgstr "Pläterade hål"
#: common/layer_id.cpp:169
msgid "Plated hole walls"
msgstr "Pläterade håls väggar"
#: common/layer_id.cpp:170
msgid "Non-plated holes"
msgstr "Icke-pläterade hål"
#: common/layer_id.cpp:171 pcbnew/dialogs/panel_edit_options_base.cpp:336
#: pcbnew/widgets/appearance_controls.cpp:347
#: pcbnew/widgets/appearance_controls.cpp:717
#: pcbnew/widgets/appearance_controls.cpp:2439
msgid "Ratsnest"
msgstr "Nätlinjer"
#: common/layer_id.cpp:172
msgid "DRC warnings"
msgstr "DRC-varningar"
#: common/layer_id.cpp:173
msgid "DRC errors"
msgstr "DRC-fel"
#: common/layer_id.cpp:174
msgid "DRC exclusions"
msgstr "DRC-undantag"
#: common/layer_id.cpp:175
msgid "DRC marker shadows"
msgstr "DRC-markörskuggor"
#: common/layer_id.cpp:182
msgid "Grid axes"
msgstr "Rutnätsaxlar"
#: common/layer_id.cpp:185
msgid "Locked item shadow"
msgstr "Låsta objekts skuggning"
#: common/layer_id.cpp:186
msgid "Courtyard collision shadow"
msgstr "Skuggad kollision mellan gårdsplaner"
#: common/lib_id.cpp:144
msgid "Illegal character found in logical library name"
msgstr "Olagligt tecken hittades i det logiska biblioteksnamnet"
#: common/lib_table_grid_tricks.cpp:49
msgid "Activate selected"
msgstr "Aktivera vald"
#: common/lib_table_grid_tricks.cpp:51
msgid "Deactivate selected"
msgstr "Deaktivera vald"
#: common/lib_tree_model.cpp:148
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:131
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:99
#: eeschema/dialogs/dialog_sim_model.cpp:467 eeschema/lib_item.cpp:58
#: eeschema/symbol_editor/symbol_editor.cpp:1233
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:67
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:78
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:89
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:100
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:113
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:124
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:177
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:188
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:201
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:212
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:223
msgid "Unit"
msgstr "Enhet"
#: common/libeval_compiler/libeval_compiler.cpp:569
#, c-format
msgid "Unrecognized character '%c'"
msgstr "Okänt tecken '%c'"
#: common/libeval_compiler/libeval_compiler.cpp:830
msgid "Unknown parent of function parameters"
msgstr "Okänd förälder av funktionsparametrar"
#: common/libeval_compiler/libeval_compiler.cpp:849
msgid "Unknown parent of property"
msgstr "Okänd förälder till egenskap"
#: common/libeval_compiler/libeval_compiler.cpp:872
#: common/libeval_compiler/libeval_compiler.cpp:902
#: common/libeval_compiler/libeval_compiler.cpp:976
#: common/libeval_compiler/libeval_compiler.cpp:1049
#, c-format
msgid "Unrecognized item '%s'"
msgstr "Okänt objekt '%s'"
#: common/libeval_compiler/libeval_compiler.cpp:878
#: common/libeval_compiler/libeval_compiler.cpp:981
#, c-format
msgid "Unrecognized property '%s'"
msgstr "Okänd egenskap '%s'"
#: common/libeval_compiler/libeval_compiler.cpp:915
#, c-format
msgid "Unrecognized function '%s'"
msgstr "Okänd funktion '%s'"
#: common/libeval_compiler/libeval_compiler.cpp:1008
#, c-format
msgid "Unexpected units for '%s'"
msgstr "Oväntade enheter för '%s'"
#: common/libeval_compiler/libeval_compiler.cpp:1020
#, c-format
msgid "Missing units for '%s'| (%s)"
msgstr "Saknade enheter för '%s'| (%s)"
#: common/libeval_compiler/libeval_compiler.cpp:1140
#, c-format
msgid "Type mismatch between '%s' and %lf"
msgstr "Typkonflikt mellan '%s' och %lf"
#: common/libeval_compiler/libeval_compiler.cpp:1146
#, c-format
msgid "Type mismatch between %lf and '%s'"
msgstr "Typkonflikt mellan %lf och '%s'"
#: common/pgm_base.cpp:195
msgid "No default editor found, you must choose one."
msgstr "Ingen standardredigerare hittades, du måste välja en."
#: common/pgm_base.cpp:215 common/pgm_base.cpp:217
msgid "Executable file"
msgstr "Körbar file"
#: common/pgm_base.cpp:227
msgid "Select Preferred Editor"
msgstr "Välj önskad redigerare"
#: common/pgm_base.cpp:355
msgid ""
"KiCad can anonymously report crashes and special event data to developers in "
"order to aid identifying critical bugs across the user base more effectively "
"and help profile functionality to guide improvements. \n"
"If you choose to voluntarily participate, KiCad will automatically handle "
"sending said reports when crashes or events occur. \n"
"Your design files such as schematic or PCB are not shared in this process."
msgstr ""
"KiCad kan rapportera krascher och data för speciella händelser anonymt till "
"utvecklare för att underlätta effektivare identifiering av kritiska buggar "
"hos användarna och hjälpa till att profilera funktionalitet för att vägleda "
"förbättringsarbetet.\n"
"Om du väljer att delta frivilligt, kommer KiCad automatiskt att ta hand om "
"sändning av dessa rapporter när krascher eller särskilda händelser "
"inträffar.\n"
"Dina designfiler såsom kretscchema och mönsterkort delas inte i denna "
"process."
#: common/pgm_base.cpp:362
msgid "Data collection opt in request"
msgstr "Förfrågan om deltagande i datainsamling"
#: common/pgm_base.cpp:427
msgid "Environment variable HOME is empty. Unable to continue."
msgstr "Miljövariabeln HOME är tom. Kan inte fortsätta."
#: common/pgm_base.cpp:651
msgid "This language is not supported by the operating system."
msgstr "Det här språket stöds inte av operativsystemet."
#: common/pgm_base.cpp:702 common/pgm_base.cpp:743
msgid "The KiCad language file for this language is not installed."
msgstr "KiCad-språkfilen för detta språk är inte installerad."
#: common/plotters/PDF_plotter.cpp:825
#, c-format
msgid "Page %s"
msgstr "Sida %s"
#: common/plotters/PDF_plotter.cpp:829
#, c-format
msgid "%s (Page %s)"
msgstr "%s (sida %s)"
#: common/plotters/PDF_plotter.cpp:1195
#, c-format
msgid "Show Page %s"
msgstr "Visa sida %s"
#: common/plotters/PDF_plotter.cpp:1206
#: eeschema/symbol_editor/symbol_edit_frame.cpp:805
#: eeschema/tools/sch_navigate_tool.cpp:86
#, c-format
msgid "Open %s"
msgstr "Öppna '%s'"
#: common/plugins/altium/altium_parser.cpp:55
#, c-format
msgid "Cannot open file '%s'."
msgstr "Det går inte att öppna filen '%s'."
#: common/plugins/altium/altium_parser.cpp:64
msgid "Error reading file: cannot determine length."
msgstr "Fel vid inläsning av fil: kunde inte bestämma längd."
#: common/plugins/altium/altium_parser.cpp:77
msgid "Error reading file."
msgstr "Fel vid läsning av fil."
#: common/plugins/altium/altium_parser.cpp:192
msgid ""
"Missing null byte at end of property list. Imported data might be malformed "
"or missing."
msgstr ""
"Nollbyte saknas i slutet av egenskapslistan. Importerade data kan vara "
"felaktiga eller saknas."
#: common/plugins/altium/altium_parser.cpp:313
#, c-format
msgid "Unit '%s' does not end with 'mil'."
msgstr "Enhet '%s' slutar inte med 'mil'."
#: common/plugins/altium/altium_parser.cpp:321
#, c-format
msgid "Cannot convert '%s' to double."
msgstr "Kan inte konvertera '%s' till double."
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2338
#, c-format
msgid "Cannot open file '%s'"
msgstr "Kan inte öppna filen '%s'"
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2358
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2655
msgid "File import cancelled by user."
msgstr "Filimport avbröts av användaren."
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2374
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2392
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2408
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2414
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2420
msgid "The selected file is not valid or might be corrupt!"
msgstr "Den valda filen är inte giltig eller kan vara skadad!"
#: common/plugins/cadstar/cadstar_archive_parser.cpp:2519
#, c-format
msgid "Unexpected number of points in '%s'. Found %d but expected %d."
msgstr "Oväntat antal poäng i '%s'. Hittade %d men förväntade %d."
#: common/plugins/cadstar/cadstar_archive_parser.h:40
#, c-format
msgid "Missing node '%s' in '%s'"
msgstr "Saknad nod '%s' i '%s'"
#: common/plugins/cadstar/cadstar_archive_parser.h:43
#, c-format
msgid "Unknown node '%s' in '%s'"
msgstr "Okänd nod '%s' i '%s'"
#: common/plugins/cadstar/cadstar_archive_parser.h:46
#, c-format
msgid "Missing Parameter '%s' in '%s'"
msgstr "Saknad parameter '%s' i '%s'"
#: common/plugins/cadstar/cadstar_archive_parser.h:49
#, c-format
msgid "Unknown Parameter '%s' in '%s'"
msgstr "Okänd parameter '%s' i '%s'"
#: common/plugins/cadstar/cadstar_archive_parser.h:52
#, c-format
msgid "Unable to parse '%s' in '%s'"
msgstr "Det går inte att tolka '%s' i '%s'"
#: common/plugins/eagle/eagle_parser.cpp:120
#, c-format
msgid "Invalid size %lld: too large"
msgstr "Ogiltig storlek %lld: för stor"
#: common/plugins/eagle/eagle_parser.cpp:281
#, c-format
msgid "Invalid Arc with radius %f and angle %f"
msgstr "Ogiltig båge med radie %f och vinkel %f"
#: common/project.cpp:351 common/project.cpp:356 pcbnew/pcb_base_frame.cpp:199
msgid "Error loading project footprint library table."
msgstr "Fel vid inläsning av bibliotekstabellen för projektets fotavtryck."
#: common/project/net_settings.cpp:61 pcbnew/board.cpp:108
msgid "This is the default net class."
msgstr "Detta är standardnätklassen."
#: common/project/project_archiver.cpp:52 kicad/pcm/pcm_task_manager.cpp:330
msgid "Could not open archive file."
msgstr "Kunde inte öppna arkivfilen."
#: common/project/project_archiver.cpp:61 kicad/pcm/pcm_task_manager.cpp:338
msgid "Invalid archive file format."
msgstr "Ogiltigt arkivfilformat."
#: common/project/project_archiver.cpp:72
#, c-format
msgid "Extracting file '%s'."
msgstr "Extraherar fil '%s'."
#: common/project/project_archiver.cpp:95 kicad/pcm/pcm_task_manager.cpp:250
#: kicad/pcm/pcm_task_manager.cpp:295
msgid "Error extracting file!"
msgstr "Fel vid extrahering av fil!"
#: common/project/project_archiver.cpp:155 eeschema/dialogs/dialog_erc.cpp:954
#: eeschema/netlist_exporters/netlist_exporter_cadstar.cpp:48
#: eeschema/netlist_exporters/netlist_exporter_orcadpcb2.cpp:52
#: eeschema/sch_plotter.cpp:165 eeschema/sch_plotter.cpp:376
#: eeschema/sch_plotter.cpp:520 eeschema/sch_plotter.cpp:731
#: eeschema/sch_plotter.cpp:903 gerbview/export_to_pcbnew.cpp:68
#: pagelayout_editor/files.cpp:212 pcbnew/build_BOM_from_board.cpp:101
#: pcbnew/dialogs/dialog_board_statistics.cpp:656
#: pcbnew/dialogs/dialog_drc.cpp:874 pcbnew/dialogs/dialog_export_idf.cpp:223
#: pcbnew/dialogs/dialog_export_svg.cpp:315
#: pcbnew/dialogs/dialog_export_vrml.cpp:266
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:297
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:318
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:426
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:472
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:574
#: pcbnew/dialogs/dialog_gendrill.cpp:482 pcbnew/dialogs/dialog_plot.cpp:1120
#: pcbnew/exporters/export_footprint_associations.cpp:83
#: pcbnew/exporters/export_gencad.cpp:257
#: pcbnew/exporters/gendrill_Excellon_writer.cpp:117
#: pcbnew/exporters/gendrill_file_writer_base.cpp:336
#: pcbnew/exporters/gendrill_gerber_writer.cpp:101
#: pcbnew/exporters/gerber_jobfile_writer.cpp:153
#, c-format
msgid "Failed to create file '%s'."
msgstr "Det gick inte att skapa filen '%s'."
#: common/project/project_archiver.cpp:201
#, c-format
msgid "Archived file '%s'."
msgstr "Arkiverade filen '%s'."
#: common/project/project_archiver.cpp:211
#, c-format
msgid "Failed to archive file '%s'."
msgstr "Kunde inte arkivera filen '%s'."
#: common/project/project_archiver.cpp:237
#, c-format
msgid "Zip archive '%s' created (%s uncompressed, %s compressed)."
msgstr "Zip-arkiv '%s' skapat (%s okomprimerat, %s komprimerat)."
#: common/rc_item.cpp:350
msgid "Excluded warning: "
msgstr "Undantagen varning: "
#: common/rc_item.cpp:352
msgid "Excluded error: "
msgstr "Undantaget fel: "
#: common/rc_item.cpp:356
msgid "Warning: "
msgstr "Varning: "
#: common/rc_item.cpp:360
msgid "Error: "
msgstr "Fel: "
#: common/richio.cpp:175
#, c-format
msgid "Unable to open %s for reading."
msgstr "Kunde inte öppna %s för läsning."
#: common/richio.cpp:226 common/richio.cpp:324
msgid "Maximum line length exceeded"
msgstr "Maximal radlängd överskriden"
#: common/richio.cpp:289
msgid "Line length exceeded"
msgstr "Radens längd överskriden"
#: common/richio.cpp:573
msgid "OUTPUTSTREAM_OUTPUTFORMATTER write error"
msgstr "OUTPUTSTREAM_OUTPUTFORMATTER skrivfel"
#: common/settings/color_settings.cpp:330
msgid "(Footprints)"
msgstr "(Fotavtryck)"
#: common/settings/color_settings.cpp:382
#: pagelayout_editor/dialogs/panel_pl_editor_color_settings.cpp:78
msgid "KiCad Default"
msgstr "KiCad Standard"
#: common/settings/color_settings.cpp:387
msgid "KiCad Classic"
msgstr "KiCad Klassisk"
#: common/template_fieldnames.cpp:59
#, c-format
msgid "Field%d"
msgstr "Fält%d"
#: common/tool/action_menu.cpp:208 common/tool/action_menu.cpp:213
#, c-format
msgid "Close %s"
msgstr "Stäng %s"
#: common/tool/action_menu.cpp:227
#, c-format
msgid "Quit %s"
msgstr "Avsluta %s"
#: common/tool/actions.cpp:43
msgid "New..."
msgstr "Ny..."
#: common/tool/actions.cpp:43
msgid "Create a new document in the editor"
msgstr "Skapa ett nytt dokument i redigeraren"
#: common/tool/actions.cpp:49 eeschema/symbol_editor/symbol_editor.cpp:560
#: pcbnew/footprint_libraries_utils.cpp:1073
msgid "New Library..."
msgstr "Nytt Bibliotek..."
#: common/tool/actions.cpp:49
msgid "Create a new library folder"
msgstr "Skapa en ny biblioteksmapp"
#: common/tool/actions.cpp:55
msgid "Add Library..."
msgstr "Lägg till Bibliotek..."
#: common/tool/actions.cpp:55
msgid "Add an existing library folder"
msgstr "Lägg till en befintlig biblioteksmapp"
#: common/tool/actions.cpp:61
msgid "Open existing document"
msgstr "Öppna befintligt dokument"
#: common/tool/actions.cpp:67
msgid "Save changes"
msgstr "Spara ändringar"
#: common/tool/actions.cpp:73 eeschema/tools/ee_actions.cpp:147
msgid "Save As..."
msgstr "Spara Som..."
#: common/tool/actions.cpp:73
msgid "Save current document to another location"
msgstr "Spara aktuellt dokument till en annan plats"
#: common/tool/actions.cpp:79
msgid "Save a Copy..."
msgstr "Spara en kopia..."
#: common/tool/actions.cpp:79
msgid "Save a copy of the current document to another location"
msgstr "Spara en kopia av det aktuella dokumentet till en annan plats"
#: common/tool/actions.cpp:85
msgid "Save All"
msgstr "Spara Alla"
#: common/tool/actions.cpp:85
msgid "Save all changes"
msgstr "Spara alla ändringar"
#: common/tool/actions.cpp:91
msgid "Throw away changes"
msgstr "Kasta bort förändringar"
#: common/tool/actions.cpp:96
msgid "Page Settings..."
msgstr "Sidinställningar..."
#: common/tool/actions.cpp:96
msgid "Settings for paper size and title block info"
msgstr "Inställningar för pappersstorlek och information i namnruta"
#: common/tool/actions.cpp:102
msgid "Print..."
msgstr "Skriv ut..."
#: common/tool/actions.cpp:108
msgid "Plot..."
msgstr "Plotta..."
#: common/tool/actions.cpp:108 pcbnew/dialogs/dialog_plot.cpp:179
#: pcbnew/dialogs/dialog_plot_base.h:155
msgid "Plot"
msgstr "Plotta"
#: common/tool/actions.cpp:114
msgid "Close the current editor"
msgstr "Stäng den aktuella redigeraren"
#: common/tool/actions.cpp:121
msgid "Cancel current tool"
msgstr "Avbryt nuvarande verktyg"
#: common/tool/actions.cpp:127
msgid "Show Context Menu"
msgstr "Visa Kontextmeny"
#: common/tool/actions.cpp:127
msgid "Perform the right-mouse-button action"
msgstr "Utför höger musknappsåtgärd"
#: common/tool/actions.cpp:136 pcbnew/dialogs/panel_setup_rules.cpp:106
msgid "Undo"
msgstr "Ångra"
#: common/tool/actions.cpp:136
msgid "Undo last edit"
msgstr "Ångra den senaste redigeringen"
#: common/tool/actions.cpp:147 pcbnew/dialogs/panel_setup_rules.cpp:107
msgid "Redo"
msgstr "Upprepa"
#: common/tool/actions.cpp:147
msgid "Redo last edit"
msgstr "Gör om den senaste redigeringen"
#: common/tool/actions.cpp:153
msgid "Cut selected item(s) to clipboard"
msgstr "Klipp ut markerade objekt till urklipp"
#: common/tool/actions.cpp:159
msgid "Copy selected item(s) to clipboard"
msgstr "Kopiera markerade objekt till urklipp"
#: common/tool/actions.cpp:165
msgid "Paste item(s) from clipboard"
msgstr "Klistra in objekt från urklipp"
#: common/tool/actions.cpp:171
msgid "Select all items on screen"
msgstr "Välj alla objekt på skärmen"
#: common/tool/actions.cpp:175
msgid "Paste Special..."
msgstr "Klistra in Special..."
#: common/tool/actions.cpp:175
msgid "Paste item(s) from clipboard with annotation options"
msgstr "Klistra in objekt från urklipp med numreringsalternativ"
#: common/tool/actions.cpp:181
msgid "Duplicate"
msgstr "Duplicera"
#: common/tool/actions.cpp:181
msgid "Duplicates the selected item(s)"
msgstr "Duplicerar markerade objekt"
#: common/tool/actions.cpp:192
msgid "Deletes selected item(s)"
msgstr "Raderar markerade objekt"
#: common/tool/actions.cpp:197
msgid "Interactive Delete Tool"
msgstr "Interaktivt Raderingsverktyg"
#: common/tool/actions.cpp:197
msgid "Delete clicked items"
msgstr "Radera objekt med klickning"
#: common/tool/actions.cpp:204
msgid "Cycle arc editing mode"
msgstr "Växla redigeringsläge för båge"
#: common/tool/actions.cpp:205
msgid "Switch to a different method of editing arcs"
msgstr "Byt till en annan metod att redigera bågar"
#: common/tool/actions.cpp:210
msgid "Show Search Panel"
msgstr "Visa dialogruta för sökning"
#: common/tool/actions.cpp:210
msgid "Show/hide the search panel"
msgstr "Visa / dölj dialogruta för sökning"
#: common/tool/actions.cpp:216 eeschema/dialogs/dialog_schematic_find.cpp:33
#: eeschema/dialogs/dialog_schematic_find_base.h:81
#: pcbnew/dialogs/dialog_find.cpp:56
msgid "Find"
msgstr "Sök"
#: common/tool/actions.cpp:216
msgid "Find text"
msgstr "Hitta text"
#: common/tool/actions.cpp:222 eeschema/dialogs/dialog_schematic_find.cpp:44
msgid "Find and Replace"
msgstr "Sök och Ersätt"
#: common/tool/actions.cpp:222
msgid "Find and replace text"
msgstr "Sök och ersätt text"
#: common/tool/actions.cpp:228 pcbnew/dialogs/dialog_find_base.cpp:91
msgid "Find Next"
msgstr "Hitta Nästa"
#: common/tool/actions.cpp:228
msgid "Find next match"
msgstr "Hitta nästa träff"
#: common/tool/actions.cpp:234
msgid "Find Next Marker"
msgstr "Hitta Nästa Markör"
#: common/tool/actions.cpp:240
msgid "Replace and Find Next"
msgstr "Byt Ut och Hitta Nästa"
#: common/tool/actions.cpp:240
msgid "Replace current match and find next"
msgstr "Ersätt aktuell matchning och hitta nästa"
#: common/tool/actions.cpp:246
msgid "Replace All"
msgstr "Ersätt Alla"
#: common/tool/actions.cpp:246
msgid "Replace all matches"
msgstr "Ersätt alla träffar"
#: common/tool/actions.cpp:257
msgid "Previous Marker"
msgstr "Föregående Markör"
#: common/tool/actions.cpp:257
msgid "Go to previous marker in Checker window"
msgstr "Gå till föregående markör i Kontrollfönstret"
#: common/tool/actions.cpp:263
msgid "Next Marker"
msgstr "Nästa Markör"
#: common/tool/actions.cpp:263
msgid "Go to next marker in Checker window"
msgstr "Gå till nästa markör i Kontrollfönstret"
#: common/tool/actions.cpp:269
msgid "Exclude Marker"
msgstr "Exkludera Markör"
#: common/tool/actions.cpp:269
msgid "Mark current violation in Checker window as an exclusion"
msgstr "Markera aktuell överträdelse i Kontrollfönstret som ett undantag"
#: common/tool/actions.cpp:281 kicad/pcm/dialogs/dialog_pcm_base.cpp:131
msgid "Refresh"
msgstr "Uppdatera"
#: common/tool/actions.cpp:292
msgid "Zoom to Fit"
msgstr "Zooma för att Passa"
#: common/tool/actions.cpp:297
msgid "Zoom to Objects"
msgstr "Zooma till objekt"
#: common/tool/actions.cpp:308
msgid "Zoom In at Cursor"
msgstr "Zooma In vid Markören"
#: common/tool/actions.cpp:319
msgid "Zoom Out at Cursor"
msgstr "Zooma Ut vid Markören"
#: common/tool/actions.cpp:325 common/widgets/mathplot.cpp:1678
#: eeschema/sim/sim_plot_frame_base.cpp:87
#: pcbnew/dialogs/panel_setup_rules.cpp:122
msgid "Zoom In"
msgstr "Zooma In"
#: common/tool/actions.cpp:331 common/widgets/mathplot.cpp:1679
#: eeschema/sim/sim_plot_frame_base.cpp:91
#: pcbnew/dialogs/panel_setup_rules.cpp:123
msgid "Zoom Out"
msgstr "Zooma Ut"
#: common/tool/actions.cpp:337 common/widgets/mathplot.cpp:1676
msgid "Center on Cursor"
msgstr "Centrera på markören"
#: common/tool/actions.cpp:343
msgid "Zoom to Selection"
msgstr "Zooma till Markering"
#: common/tool/actions.cpp:356
msgid "Cursor Up"
msgstr "Markör Upp"
#: common/tool/actions.cpp:362
msgid "Cursor Down"
msgstr "Markör Ner"
#: common/tool/actions.cpp:368
msgid "Cursor Left"
msgstr "Markör Vänster"
#: common/tool/actions.cpp:374
msgid "Cursor Right"
msgstr "Markör Höger"
#: common/tool/actions.cpp:381
msgid "Cursor Up Fast"
msgstr "Markör Snabbt Upp"
#: common/tool/actions.cpp:387
msgid "Cursor Down Fast"
msgstr "Markör Snabbt Ner"
#: common/tool/actions.cpp:393
msgid "Cursor Left Fast"
msgstr "Markör Snabbt Vänster"
#: common/tool/actions.cpp:399
msgid "Cursor Right Fast"
msgstr "Markör Snabbt Höger"
#: common/tool/actions.cpp:405
msgid "Click"
msgstr "Klicka"
#: common/tool/actions.cpp:405
msgid "Performs left mouse button click"
msgstr "Utför klick med vänster musknapp"
#: common/tool/actions.cpp:411
msgid "Double-click"
msgstr "Dubbelklicka"
#: common/tool/actions.cpp:411
msgid "Performs left mouse button double-click"
msgstr "Utför dubbelklick med vänster musknapp"
#: common/tool/actions.cpp:419
msgid "Pin Library"
msgstr "Stift-bibliotek"
#: common/tool/actions.cpp:420
msgid "Keep the library at the top of the list"
msgstr "Behåll biblioteket på toppen av listan"
#: common/tool/actions.cpp:424
msgid "Unpin Library"
msgstr "Lossa Biblioteket"
#: common/tool/actions.cpp:425
msgid "No longer keep the library at the top of the list"
msgstr "Behåll inte biblioteket på toppen av listan"
#: common/tool/actions.cpp:430
msgid "Pan Up"
msgstr "Panorera Uppåt"
#: common/tool/actions.cpp:436
msgid "Pan Down"
msgstr "Panorera Nedåt"
#: common/tool/actions.cpp:442
msgid "Pan Left"
msgstr "Panorera till Vänster"
#: common/tool/actions.cpp:448
msgid "Pan Right"
msgstr "Panorera till Höger"
#: common/tool/actions.cpp:455
msgid "Switch to Fast Grid 1"
msgstr "Byt till Snabbrutnät 1"
#: common/tool/actions.cpp:460
msgid "Switch to Fast Grid 2"
msgstr "Byt till Snabbrutnät 2"
#: common/tool/actions.cpp:465
msgid "Switch to Next Grid"
msgstr "Byt till Nästa Rutnät"
#: common/tool/actions.cpp:469
msgid "Switch to Previous Grid"
msgstr "Byt till Föregående Rutnät"
#: common/tool/actions.cpp:474
msgid "Set the grid origin point"
msgstr "Ange rutnätets origo"
#: common/tool/actions.cpp:487
msgid "Show Grid"
msgstr "Visa Rutnät"
#: common/tool/actions.cpp:487
msgid "Display background grid in the edit window"
msgstr "Visa rutnät i redigeringsfönstrets bakgrund"
#: common/tool/actions.cpp:492
msgid "Grid Properties..."
msgstr "Rutnätsegenskaper..."
#: common/tool/actions.cpp:492
msgid "Set grid dimensions"
msgstr "Ange rutnätets delning"
#: common/tool/actions.cpp:497
msgid "Use inches"
msgstr "Använd tum"
#: common/tool/actions.cpp:502
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/dialog_export_idf_base.cpp:102
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:89
#: pcbnew/import_gfx/dialog_import_gfx.cpp:51
msgid "Mils"
msgstr "Mils (1/1000 tum)"
#: common/tool/actions.cpp:502
msgid "Use mils"
msgstr "Använd mils"
#: common/tool/actions.cpp:507
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/dialog_export_idf_base.cpp:102
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:55
#: pcbnew/dialogs/dialog_gendrill_base.cpp:106
#: pcbnew/dialogs/dialog_plot_base.cpp:350
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:89
#: pcbnew/import_gfx/dialog_import_gfx.cpp:50
msgid "Millimeters"
msgstr "Millimeter"
#: common/tool/actions.cpp:507
msgid "Use millimeters"
msgstr "Använd millimeter"
#: common/tool/actions.cpp:518 common/widgets/lib_tree.cpp:700
msgid "Select Columns"
msgstr "Välj kolumner"
#: common/tool/actions.cpp:523
msgid "Switch units"
msgstr "Växla måttenhet"
#: common/tool/actions.cpp:523
msgid "Switch between imperial and metric units"
msgstr "Växla mellan brittiska och metriska måttenheter"
#: common/tool/actions.cpp:528
msgid "Polar Coordinates"
msgstr "Polära Koordinater"
#: common/tool/actions.cpp:528
msgid "Switch between polar and cartesian coordinate systems"
msgstr "Växla mellan polärt och kartesiskt koordinatsystem"
#: common/tool/actions.cpp:534
msgid "Reset Local Coordinates"
msgstr "Återställ Lokala Koordinater"
#: common/tool/actions.cpp:540
msgid "Always Show Cursor"
msgstr "Visa Alltid Markören"
#: common/tool/actions.cpp:540
msgid "Display crosshairs even in selection tool"
msgstr "Visa hårkors även i markeringsverktyget"
#: common/tool/actions.cpp:545
msgid "Full-Window Crosshairs"
msgstr "Korshår över Hela Fönstret"
#: common/tool/actions.cpp:545
msgid "Switch display of full-window crosshairs"
msgstr "Växla visning av hårkors i hela fönstret"
#: common/tool/actions.cpp:551
msgid "Inactive Layer View Mode"
msgstr "Visningsläge för inaktiva lager"
#: common/tool/actions.cpp:552
msgid "Toggle inactive layers between normal and dimmed"
msgstr "Växla inaktiva lager mellan normalt och nedtonat"
#: common/tool/actions.cpp:558
msgid "Inactive Layer View Mode (3-state)"
msgstr "Visningsläge för inaktiva lager (3-läge)"
#: common/tool/actions.cpp:559
msgid "Cycle inactive layers between normal, dimmed, and hidden"
msgstr "Växla inaktiva lager mellan normala, nedtonade och dolda"
#: common/tool/actions.cpp:564
msgid "Draw Bounding Boxes"
msgstr "Rita avgränsningsbox"
#: common/tool/actions.cpp:569
msgid "Select item(s)"
msgstr "Välj objekt"
#: common/tool/actions.cpp:576
msgid "Measure Tool"
msgstr "Mätverktyg"
#: common/tool/actions.cpp:576
msgid "Interactively measure distance between points"
msgstr "Mät avståndet mellan punkter interaktivt"
#: common/tool/actions.cpp:590
msgid "Show 3D viewer window"
msgstr "Visa 3D-visningsfönster"
#: common/tool/actions.cpp:595 eeschema/symbol_viewer_frame.cpp:106
#: eeschema/symbol_viewer_frame.cpp:1172
msgid "Symbol Library Browser"
msgstr "Bläddrare för Symbolbibliotek"
#: common/tool/actions.cpp:595
msgid "Browse symbol libraries"
msgstr "Bläddra bland symbolbibliotek"
#: common/tool/actions.cpp:600
msgid "Create, delete and edit symbols"
msgstr "Skapa, ta bort och redigera symboler"
#: common/tool/actions.cpp:605 pcbnew/footprint_viewer_frame.cpp:114
#: pcbnew/footprint_viewer_frame.cpp:1186
msgid "Footprint Library Browser"
msgstr "Fotavtrycksbiblioteksläsaren"
#: common/tool/actions.cpp:605
msgid "Browse footprint libraries"
msgstr "Bläddra i fotavtrycksbibliotek"
#: common/tool/actions.cpp:610
msgid "Create, delete and edit footprints"
msgstr "Skapa, ta bort och redigera fotavtryck"
#: common/tool/actions.cpp:616
msgid "Update PCB from Schematic..."
msgstr "Uppdatera Mönsterkort från Schema..."
#: common/tool/actions.cpp:616
msgid "Update PCB with changes made to schematic"
msgstr "Uppdatera mönsterkort med ändringar som gjorts i schemat"
#: common/tool/actions.cpp:621
msgid "Update Schematic from PCB..."
msgstr "Uppdatera Schema från Mönsterkort..."
#: common/tool/actions.cpp:621
msgid "Update schematic with changes made to PCB"
msgstr "Uppdatera schema med ändringar gjorda på mönsterkort"
#: common/tool/actions.cpp:631
#: pcbnew/dialogs/panel_fp_properties_3d_model_base.cpp:69
msgid "Configure Paths..."
msgstr "Konfigurera Sökvägar..."
#: common/tool/actions.cpp:631
msgid "Edit path configuration environment variables"
msgstr "Redigera miljövariabler för sökvägskonfiguration"
#: common/tool/actions.cpp:636
msgid "Manage Symbol Libraries..."
msgstr "Hantera Symbolbibliotek..."
#: common/tool/actions.cpp:637
msgid "Edit the global and project symbol library lists"
msgstr "Redigera listorna över globala och projektspecifika symbolbibliotek"
#: common/tool/actions.cpp:642
msgid "Manage Footprint Libraries..."
msgstr "Hantera fotavtrycksbibliotek..."
#: common/tool/actions.cpp:643
msgid "Edit the global and project footprint library lists"
msgstr ""
"Redigera listorna över globala och projektspecifika bibliotek för fotavtryck"
#: common/tool/actions.cpp:648
msgid "Getting Started with KiCad"
msgstr "Kom igång med KiCad"
#: common/tool/actions.cpp:649
msgid "Open \"Getting Started in KiCad\" guide for beginners"
msgstr "Öppna \"Kom igång med KiCad\"-guiden för nybörjare"
#: common/tool/actions.cpp:654
#: pagelayout_editor/dialogs/properties_frame_base.cpp:35
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:187
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:136
msgid "Help"
msgstr "Hjälp"
#: common/tool/actions.cpp:655
msgid "Open product documentation in a web browser"
msgstr "Öppna produktdokumentation i en webbläsare"
#: common/tool/actions.cpp:661
msgid "List Hotkeys..."
msgstr "Lista Snabbtangenter ..."
#: common/tool/actions.cpp:662
msgid "Displays current hotkeys table and corresponding commands"
msgstr "Visar aktuell snabbtangenttabell och motsvarande kommandon"
#: common/tool/actions.cpp:667
msgid "Get Involved"
msgstr "Engagera Dig"
#: common/tool/actions.cpp:668
msgid "Open \"Contribute to KiCad\" in a web browser"
msgstr "Öppna \"Bidra till KiCad\" i en webbläsare"
#: common/tool/actions.cpp:674
msgid "Open \"Donate to KiCad\" in a web browser"
msgstr "Öppna \"Donera till KiCad\" i en webbläsare"
#: common/tool/actions.cpp:678
msgid "Report Bug"
msgstr "Rapportera fel"
#: common/tool/common_control.cpp:210
#, c-format
msgid ""
"Help file '%s' or\n"
"'%s' could not be found.\n"
"Do you want to access the KiCad online help?"
msgstr ""
"Hjälpfil '%s' eller\n"
"'%s' kunde inte hittas.\n"
"Vill du öppna KiCads online-hjälp?"
#: common/tool/common_control.cpp:213 common/tool/common_control.cpp:233
msgid "File Not Found"
msgstr "Filen Hittades Inte"
#: common/tool/common_control.cpp:230
#, c-format
msgid ""
"Help file '%s' could not be found.\n"
"Do you want to access the KiCad online help?"
msgstr ""
"Hjälpfilen '%s' kunde inte hittas.\n"
"Vill du öppna KiCads online-hjälp?"
#: common/tool/common_control.cpp:260
#, c-format
msgid ""
"Could not launch the default browser.\n"
"For information on how to help the KiCad project, visit %s"
msgstr ""
"Det gick inte att starta standardwebbläsaren.\n"
"Besök %s för information om hur du hjälper KiCad-projektet."
#: common/tool/common_control.cpp:263
msgid "Get involved with KiCad"
msgstr "Bli engagerad i KiCad"
#: common/tool/common_control.cpp:275
#, c-format
msgid ""
"Could not launch the default browser.\n"
"To donate to the KiCad project, visit %s"
msgstr ""
"Kunde inte starta standardwebbläsaren.\n"
"För att donera till KiCad-projektet, besök %s"
#: common/tool/grid_menu.cpp:100
#, c-format
msgid "Grid: %s (%s)"
msgstr "Rutnät: %s (%s)"
#: common/tool/grid_menu.cpp:112
#, c-format
msgid "User grid: %s (%s)"
msgstr "Användarrutnät: %s (%s)"
#: common/tool/selection_tool.cpp:294
msgid "Select &All\tA"
msgstr "Välj & Alla\tA"
#: common/tool/selection_tool.cpp:297
msgid "&Expand Selection\tE"
msgstr "& Expandera val E"
#: common/tool/zoom_menu.cpp:67
#, c-format
msgid "Zoom: %.2f"
msgstr "Zoom: %.2f"
#: common/validators.cpp:250
#, c-format
msgid "Incorrect value: %s"
msgstr "Felaktigt värde: %s"
#: common/validators.cpp:294
msgid "Entry contains trailing white space."
msgstr "Posten innehåller efterföljande blanksteg."
#: common/validators.cpp:298
msgid "Entry contains leading white space."
msgstr "Posten innehåller inledande blanksteg."
#: common/validators.cpp:302
#, c-format
msgid "'%s' is not a valid library identifier format."
msgstr "'%s' är inte ett giltigt format för biblioteksidentifierare."
#: common/validators.cpp:309
msgid "Library Identifier Validation Error"
msgstr "Valideringsfel för Biblioteksidentifierare"
#: common/validators.cpp:356
msgid "Invalid signal name"
msgstr "Ogiltigt signalnamn"
#: common/validators.cpp:367
msgid "Signal names cannot contain CR or LF characters"
msgstr "Signalnamn får inte innehålla radbrytningstecken"
#: common/validators.cpp:370
msgid "Signal names cannot contain spaces"
msgstr "Signalnamn får inte innehålla blanksteg"
#: common/view/view.cpp:537
msgid "Mirroring for Y axis is not supported yet"
msgstr "Spegelvändning av Y-axeln stöds inte än"
#: common/widgets/font_choice.cpp:58
msgid "<not found>"
msgstr "<hittades inte>"
#: common/widgets/footprint_preview_widget.cpp:103
msgid "Footprint not found."
msgstr "Fotavtryck hittades inte."
#: common/widgets/footprint_select_widget.cpp:141
msgid "No default footprint"
msgstr "Inget standardfotavtryck"
#: common/widgets/gal_options_panel.cpp:86
msgid "Accelerated graphics"
msgstr "Accelererad grafik"
#: common/widgets/gal_options_panel.cpp:86
msgid "Fallback graphics"
msgstr "Reserv-grafik"
#: common/widgets/gal_options_panel.cpp:87
msgid "Rendering Engine"
msgstr "Renderingsmotor"
#: common/widgets/gal_options_panel.cpp:91
msgid "Hardware-accelerated graphics (recommended)"
msgstr "Hårdvaruaccelererad grafik (rekommenderas)"
#: common/widgets/gal_options_panel.cpp:92
msgid ""
"Software graphics (for computers which do not support KiCad's hardware "
"acceleration requirements)"
msgstr ""
"Programvarugrafik (för datorer som inte stöder KiCads krav på "
"hårdvaruacceleration)"
#: common/widgets/gal_options_panel.cpp:104
msgid "Grid Options"
msgstr "Alternativ för Rutnät"
#: common/widgets/gal_options_panel.cpp:109
msgid "Dots"
msgstr "Prickar"
#: common/widgets/gal_options_panel.cpp:110
msgid "Lines"
msgstr "Linjer"
#: common/widgets/gal_options_panel.cpp:111
msgid "Small crosses"
msgstr "Små kors"
#: common/widgets/gal_options_panel.cpp:115
msgid "Grid Style"
msgstr "Stil på Rutnät"
#: common/widgets/gal_options_panel.cpp:127
msgid "Grid thickness:"
msgstr "Tjocklek på rutnät:"
#: common/widgets/gal_options_panel.cpp:138
#: common/widgets/gal_options_panel.cpp:154
#: common/widgets/gal_options_panel.cpp:172
msgid "px"
msgstr "px"
#: common/widgets/gal_options_panel.cpp:143
msgid "Min grid spacing:"
msgstr "Minsta rutavstånd:"
#: common/widgets/gal_options_panel.cpp:159
msgid "Snap to Grid:"
msgstr "Fäst mot Rutnät:"
#: common/widgets/gal_options_panel.cpp:163
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:357
#: pcbnew/dialogs/panel_edit_options_base.cpp:293
#: pcbnew/dialogs/panel_edit_options_base.cpp:307
#: pcbnew/dialogs/panel_edit_options_base.cpp:321
msgid "Always"
msgstr "Alltid"
#: common/widgets/gal_options_panel.cpp:163
msgid "When grid shown"
msgstr "När rutnät visas"
#: common/widgets/gal_options_panel.cpp:163
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:357
#: pcbnew/dialogs/panel_edit_options_base.cpp:293
#: pcbnew/dialogs/panel_edit_options_base.cpp:307
#: pcbnew/dialogs/panel_edit_options_base.cpp:321
msgid "Never"
msgstr "Aldrig"
#: common/widgets/gal_options_panel.cpp:189
msgid "Cursor Options"
msgstr "Alternativ för Markör"
#: common/widgets/gal_options_panel.cpp:195
msgid "Small crosshair"
msgstr "Litet hårkors"
#: common/widgets/gal_options_panel.cpp:196
msgid "Full window crosshair"
msgstr "Hårkors över hela fönstret"
#: common/widgets/gal_options_panel.cpp:201
msgid "Cursor Shape"
msgstr "Markörens Utseende"
#: common/widgets/gal_options_panel.cpp:206
msgid "Cursor shape for drawing, placement and movement tools"
msgstr "Markörens utseende för ritning, placering och förflyttningsverktyg"
#: common/widgets/gal_options_panel.cpp:209
msgid "Always show crosshairs"
msgstr "Visa alltid hårkors"
#: common/widgets/grid_text_button_helpers.cpp:407
msgid "Select a File"
msgstr "Välj en Fil"
#: common/widgets/grid_text_button_helpers.cpp:439
msgid "Select Path"
msgstr "Välj sökväg"
#: common/widgets/lib_tree.cpp:289
msgid "recent searches"
msgstr "senaste sökningar"
#: common/widgets/mathplot.cpp:1676
msgid "Center plot view to this position"
msgstr "Centrera plottvy till denna position"
#: common/widgets/mathplot.cpp:1677 eeschema/sim/sim_plot_frame_base.cpp:95
msgid "Fit on Screen"
msgstr "Passa på Skärmen"
#: common/widgets/mathplot.cpp:1677
msgid "Set plot view to show all items"
msgstr "Ange plottvy till att visa alla objekt"
#: common/widgets/mathplot.cpp:1678
msgid "Zoom in plot view."
msgstr "Zooma in plottvy."
#: common/widgets/mathplot.cpp:1679
msgid "Zoom out plot view."
msgstr "Zooma ut plottvy."
#: common/widgets/net_selector.cpp:58 gerbview/gerber_draw_item.cpp:717
#: pcbnew/dialogs/dialog_copper_zones.cpp:397
#: pcbnew/dialogs/dialog_copper_zones.cpp:806
msgid "<no net>"
msgstr "<inget nät>"
#: common/widgets/net_selector.cpp:59
msgid "<create net>"
msgstr "<skapa nät>"
#: common/widgets/net_selector.cpp:84
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:748
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:791
msgid "Filter:"
msgstr "Filter:"
#: common/widgets/paged_dialog.cpp:69 common/widgets/paged_dialog.cpp:328
#: eeschema/dialogs/dialog_bom_base.cpp:117
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:236
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:290
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:455
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:365
msgid "Reset to Defaults"
msgstr "Återställ till standardinställningar"
#: common/widgets/paged_dialog.cpp:320
#, c-format
msgid "Reset %s to Defaults"
msgstr "Återställ %s till standardinställningar"
#: common/widgets/properties_panel.cpp:69
#: common/widgets/properties_panel.cpp:147
msgid "No objects selected"
msgstr "Inga objekt valda"
#: common/widgets/properties_panel.cpp:161
#, c-format
msgid "%d objects selected"
msgstr "%d objekt valda"
#: common/widgets/properties_panel.cpp:287
msgid "Basic Properties"
msgstr "Grundläggande egenskaper"
#: common/widgets/unit_binder.cpp:318
#, c-format
msgid "%s must be at least %s."
msgstr "%s måste vara minst %s."
#: common/widgets/unit_binder.cpp:334
#, c-format
msgid "%s must be less than %s."
msgstr "%s måste vara mindre än %s."
#: common/widgets/widget_hotkey_list.cpp:98
msgid "Press a new hotkey, or press Esc to cancel..."
msgstr "Tryck på en ny snabbtangent eller tryck på Esc för att avbryta..."
#: common/widgets/widget_hotkey_list.cpp:105
msgid "Command:"
msgstr "Kommando:"
#: common/widgets/widget_hotkey_list.cpp:113
msgid "Current key:"
msgstr "Aktuell tangent:"
#: common/widgets/widget_hotkey_list.cpp:145
msgid "Set Hotkey"
msgstr "Ange Snabbtangent"
#: common/widgets/widget_hotkey_list.cpp:351
#, c-format
msgid "'%s' is a reserved hotkey in KiCad and cannot be assigned."
msgstr "'%s' är en reserverad snabbtangent i KiCad och kan inte tilldelas."
#: common/widgets/widget_hotkey_list.cpp:402
msgid "Edit..."
msgstr "Redigera..."
#: common/widgets/widget_hotkey_list.cpp:403
msgid "Undo Changes"
msgstr "Ångra Ändringar"
#: common/widgets/widget_hotkey_list.cpp:404
msgid "Clear Assigned Hotkey"
msgstr "Rensa Tilldelad Snabbtangent"
#: common/widgets/widget_hotkey_list.cpp:405
msgid "Restore Default"
msgstr "Återställ Standard"
#: common/widgets/widget_hotkey_list.cpp:441
#, c-format
msgid ""
"'%s' is already assigned to '%s' in section '%s'. Are you sure you want to "
"change its assignment?"
msgstr ""
"'%s' har redan tilldelats '%s' i avsnitt '%s'. Är du säker på att du vill "
"ändra tilldelningen?"
#: common/widgets/widget_hotkey_list.cpp:447
msgid "Confirm change"
msgstr "Bekräfta ändring"
#: common/widgets/widget_hotkey_list.cpp:467
msgid "Command"
msgstr "Kommando"
#: common/widgets/widget_hotkey_list.cpp:470
msgid "(double-click to edit)"
msgstr "(dubbelklicka för att redigera)"
#: common/widgets/widget_hotkey_list.cpp:473
msgid "Hotkey"
msgstr "Snabbtangent"
#: common/widgets/wx_html_report_panel.cpp:192
#: common/widgets/wx_html_report_panel.cpp:213
#: common/widgets/wx_html_report_panel.cpp:242
msgid "Error:"
msgstr "Fel:"
#: common/widgets/wx_html_report_panel.cpp:196
#: common/widgets/wx_html_report_panel.cpp:217
#: common/widgets/wx_html_report_panel.cpp:243
msgid "Warning:"
msgstr "Varning:"
#: common/widgets/wx_html_report_panel.cpp:244
msgid "Info:"
msgstr "Info:"
#: common/widgets/wx_html_report_panel.cpp:368
#: eeschema/dialogs/dialog_erc.cpp:930 pcbnew/dialogs/dialog_drc.cpp:850
msgid "Save Report to File"
msgstr "Spara Rapport till Fil"
#: common/widgets/wx_html_report_panel.cpp:385
#, c-format
msgid "Cannot write report to file '%s'."
msgstr "Kan inte skriva rapporten till filen '%s'."
#: common/widgets/wx_html_report_panel.cpp:387
msgid "File save error"
msgstr "Fel vid sparandet av fil"
#: common/widgets/wx_html_report_panel_base.cpp:16
msgid "Output Messages"
msgstr "Utmatningsmeddelanden"
#: common/widgets/wx_html_report_panel_base.cpp:30
#: eeschema/dialogs/dialog_erc_base.cpp:117
#: pcbnew/dialogs/dialog_drc_base.cpp:167
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:32
msgid "Show:"
msgstr "Visa:"
#: common/widgets/wx_html_report_panel_base.cpp:34
#: eeschema/dialogs/dialog_erc_base.cpp:121 eeschema/lib_item.cpp:54
#: pcbnew/dialogs/dialog_board_reannotate.cpp:85
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:174
#: pcbnew/dialogs/dialog_drc_base.cpp:171
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:36
#: pcbnew/widgets/appearance_controls.cpp:709
#: pcbnew/widgets/appearance_controls.cpp:751
#: pcbnew/widgets/appearance_controls.cpp:2436
#: pcbnew/widgets/appearance_controls.cpp:2455
msgid "All"
msgstr "Alla"
#: common/widgets/wx_html_report_panel_base.cpp:50
#: eeschema/dialogs/dialog_erc_base.cpp:133
#: pcbnew/dialogs/dialog_drc_base.cpp:183
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:49
msgid "Warnings"
msgstr "Varningar"
#: common/widgets/wx_html_report_panel_base.cpp:59
msgid "Actions"
msgstr "Handlingar"
#: common/widgets/wx_html_report_panel_base.cpp:65
msgid "Infos"
msgstr "Information"
#: common/widgets/wx_html_report_panel_base.cpp:71
#: eeschema/dialogs/dialog_erc_base.cpp:148
#: pcbnew/dialogs/dialog_drc_base.cpp:198
msgid "Save..."
msgstr "Spara..."
#: common/wildcards_and_files_ext.cpp:201
msgid "All files"
msgstr "Alla filer"
#: common/wildcards_and_files_ext.cpp:207
msgid "KiCad drawing symbol files"
msgstr "KiCad-ritningssymbolfiler"
#: common/wildcards_and_files_ext.cpp:213
msgid "KiCad symbol library files"
msgstr "KiCad-symbolbiblioteksfiler"
#: common/wildcards_and_files_ext.cpp:220
msgid "KiCad legacy symbol library files"
msgstr "Äldre KiCad symbolbiblioteksfiler"
#: common/wildcards_and_files_ext.cpp:226
msgid "KiCad database library files"
msgstr "KiCad databas-biblioteksfiler"
#: common/wildcards_and_files_ext.cpp:233
msgid "All KiCad symbol library files"
msgstr "Alla KiCad-symbolbiblioteksfiler"
#: common/wildcards_and_files_ext.cpp:242
msgid "KiCad project files"
msgstr "KiCad projektfiler"
#: common/wildcards_and_files_ext.cpp:248
msgid "KiCad legacy project files"
msgstr "KiCad äldre projektfiler"
#: common/wildcards_and_files_ext.cpp:255
msgid "All KiCad project files"
msgstr "Alla KiCad-projektfiler"
#: common/wildcards_and_files_ext.cpp:262
msgid "All KiCad schematic files"
msgstr "Alla KiCad-schemafiler"
#: common/wildcards_and_files_ext.cpp:269
msgid "KiCad legacy schematic files"
msgstr "KiCad äldre versioners kretsschemafiler"
#: common/wildcards_and_files_ext.cpp:276
msgid "KiCad s-expression schematic files"
msgstr "KiCad s-expression kretsschemafiler"
#: common/wildcards_and_files_ext.cpp:283
msgid "Altium schematic files"
msgstr "Altium kretsschemafiler"
#: common/wildcards_and_files_ext.cpp:289
msgid "CADSTAR Schematic Archive files"
msgstr "CADSTAR kretsschema-arkivfiler"
#: common/wildcards_and_files_ext.cpp:295
msgid "CADSTAR Archive files"
msgstr "CADSTAR Arkivfiler"
#: common/wildcards_and_files_ext.cpp:301
msgid "Eagle XML schematic files"
msgstr "Eagle XML kretsschemafiler"
#: common/wildcards_and_files_ext.cpp:307
msgid "Eagle XML files"
msgstr "Eagle XML-filer"
#: common/wildcards_and_files_ext.cpp:313
msgid "OrcadPCB2 netlist files"
msgstr "OrcadPCB2 nätlistefiler"
#: common/wildcards_and_files_ext.cpp:320
msgid "KiCad netlist files"
msgstr "KiCad netlist-filer"
#: common/wildcards_and_files_ext.cpp:326
#: common/wildcards_and_files_ext.cpp:367
msgid "KiCad printed circuit board files"
msgstr "KiCad-kretskortfiler"
#: common/wildcards_and_files_ext.cpp:332
msgid "Eagle ver. 6.x XML PCB files"
msgstr "Eagle ver. 6.x XML PCB-filer"
#: common/wildcards_and_files_ext.cpp:337
msgid "CADSTAR PCB Archive files"
msgstr "CADSTAR PCB-arkivfiler"
#: common/wildcards_and_files_ext.cpp:342
msgid "P-Cad 200x ASCII PCB files"
msgstr "P-Cad 200x ASCII PCB-filer"
#: common/wildcards_and_files_ext.cpp:347
msgid "Altium Designer PCB files"
msgstr "Altium Designer PCB-filer"
#: common/wildcards_and_files_ext.cpp:352
msgid "Altium Circuit Studio PCB files"
msgstr "Altium Circuit Studio PCB-filer"
#: common/wildcards_and_files_ext.cpp:357
msgid "Altium Circuit Maker PCB files"
msgstr "Altium Circuit Maker PCB-filer"
#: common/wildcards_and_files_ext.cpp:362
msgid "Fabmaster PCB files"
msgstr "Fabmaster PCB-filer"
#: common/wildcards_and_files_ext.cpp:374
msgid "KiCad footprint files"
msgstr "KiCad footprint-filer"
#: common/wildcards_and_files_ext.cpp:381
msgid "KiCad footprint library paths"
msgstr "KiCad fotavtryck biblioteksökvägar"
#: common/wildcards_and_files_ext.cpp:388
msgid "Legacy footprint library files"
msgstr "Äldre biblioteksfiler för fotavtryck"
#: common/wildcards_and_files_ext.cpp:394
msgid "Altium PCB footprint library files"
msgstr "Altium biblioteksfiler för mönsterkortsfotavtryck"
#: common/wildcards_and_files_ext.cpp:400
msgid "Eagle ver. 6.x XML library files"
msgstr "Eagle ver. 6.x XML-biblioteksfiler"
#: common/wildcards_and_files_ext.cpp:406
msgid "Geda PCB footprint library files"
msgstr "Geda PCB-fotavtryck biblioteksfiler"
#: common/wildcards_and_files_ext.cpp:412
msgid "Drawing sheet files"
msgstr "Ritningsarksfiler"
#: common/wildcards_and_files_ext.cpp:420
msgid "KiCad symbol footprint link files"
msgstr "KiCad symbol fotavtryck länkfiler"
#: common/wildcards_and_files_ext.cpp:428 gerbview/files.cpp:70
msgid "Drill files"
msgstr "Borr-filer"
#: common/wildcards_and_files_ext.cpp:435
msgid "SVG files"
msgstr "SVG-filer"
#: common/wildcards_and_files_ext.cpp:441
msgid "HTML files"
msgstr "HTML-filer"
#: common/wildcards_and_files_ext.cpp:447
msgid "CSV Files"
msgstr "CSV-filer"
#: common/wildcards_and_files_ext.cpp:453
msgid "Portable document format files"
msgstr "Portable Document Format (PDF)-filer"
#: common/wildcards_and_files_ext.cpp:459
msgid "PostScript files"
msgstr "PostScript-filer"
#: common/wildcards_and_files_ext.cpp:465
msgid "Report files"
msgstr "Rapport-filer"
#: common/wildcards_and_files_ext.cpp:471
msgid "Component placement files"
msgstr "Komponentplaceringsfiler"
#: common/wildcards_and_files_ext.cpp:477
msgid "VRML and X3D files"
msgstr "VRML- och X3D-filer"
#: common/wildcards_and_files_ext.cpp:483
msgid "IDFv3 footprint files"
msgstr "IDFv3-fotavtrycksfiler"
#: common/wildcards_and_files_ext.cpp:489
msgid "Text files"
msgstr "Textfiler"
#: common/wildcards_and_files_ext.cpp:495
msgid "Legacy footprint export files"
msgstr "Äldre exportfiler för fotavtryck"
#: common/wildcards_and_files_ext.cpp:501
msgid "Electrical rule check file"
msgstr "Elektrisk regelkontroll-fil"
#: common/wildcards_and_files_ext.cpp:507
msgid "Spice library file"
msgstr "Spice biblioteksfil"
#: common/wildcards_and_files_ext.cpp:513
msgid "SPICE netlist file"
msgstr "SPICE netlist-fil"
#: common/wildcards_and_files_ext.cpp:519
msgid "CadStar netlist file"
msgstr "CadStar netlist-fil"
#: common/wildcards_and_files_ext.cpp:525
msgid "Symbol footprint association files"
msgstr "Associationsfiler för symbolfotavtryck"
#: common/wildcards_and_files_ext.cpp:531
msgid "Zip file"
msgstr "Zip-fil"
#: common/wildcards_and_files_ext.cpp:537
msgid "GenCAD 1.4 board files"
msgstr "GenCAD 1.4 kort-filer"
#: common/wildcards_and_files_ext.cpp:543
msgid "DXF Files"
msgstr "DXF-filer"
#: common/wildcards_and_files_ext.cpp:549
#: resources/linux/mime/kicad-gerbers.xml.in:22
msgid "Gerber job file"
msgstr "Gerber-jobbfil"
#: common/wildcards_and_files_ext.cpp:555
msgid "Specctra DSN file"
msgstr "Specctra DSN-fil"
#: common/wildcards_and_files_ext.cpp:562
msgid "Specctra Session file"
msgstr "Specctra Session-fil"
#: common/wildcards_and_files_ext.cpp:569
msgid "IPC-D-356 Test Files"
msgstr "IPC-D-356 Testfiler"
#: common/wildcards_and_files_ext.cpp:576
msgid "Workbook file"
msgstr "Arbetsboksfil"
#: common/wildcards_and_files_ext.cpp:583
msgid "PNG file"
msgstr "PNG-fil"
#: common/wildcards_and_files_ext.cpp:589
msgid "Jpeg file"
msgstr "Jpeg-fil"
#: common/wildcards_and_files_ext.cpp:595
msgid "Hotkey file"
msgstr "Snabbtangentsfil"
#: cvpcb/auto_associate.cpp:108
#, c-format
msgid "Equivalence file '%s' could not be found."
msgstr "Ekvivalensfilen '%s' kunde inte hittas."
#: cvpcb/auto_associate.cpp:128
#, c-format
msgid "Error opening equivalence file '%s'."
msgstr "Kunde inte öppna ekvivalensfilen '%s'."
#: cvpcb/auto_associate.cpp:180
msgid "Equivalence File Load Error"
msgstr "Fel Vid Laddning av Ekvivalensfil"
#: cvpcb/auto_associate.cpp:187
#, c-format
msgid "%lu footprint/symbol equivalences found."
msgstr "%lu fotavtryck/symbolekvivalenter hittade."
#: cvpcb/auto_associate.cpp:263
#, c-format
msgid ""
"Component %s: footprint %s not found in any of the project footprint "
"libraries."
msgstr ""
"Komponent %s: fotavtryck %s hittades inte i något av projektets "
"fotavtrycksbibliotek."
#: cvpcb/auto_associate.cpp:308
msgid "CvPcb Warning"
msgstr "CvPcb Varning"
#: cvpcb/cvpcb.cpp:174
msgid ""
"You have run CvPcb for the first time using the new footprint library table "
"method for finding footprints.\n"
"CvPcb has either copied the default table or created an empty table in your "
"home folder.\n"
"You must first configure the library table to include all footprint "
"libraries not included with KiCad.\n"
"See the \"Footprint Library Table\" section of the CvPcb documentation for "
"more information."
msgstr ""
"Du har kört CvPcb för första gången med den nya fotavtrycksbibliotekstabell-"
"metoden för att hitta fotavtryck i biblioteket.\n"
"CvPcb har antingen kopierat standardtabellen eller skapat en tom tabell i "
"din hemmapp.\n"
"Du måste först konfigurera bibliotekstabellen så att den innehåller alla "
"fotavtrycksbibliotek som inte ingår i KiCad.\n"
"Se avsnittet \"Footprint Library Table\" i CvPcb-dokumentationen för mer "
"information."
#: cvpcb/cvpcb.cpp:187
msgid ""
"An error occurred attempting to load the global footprint library table."
msgstr ""
"Ett fel inträffade när den globala fotavtrycksbibliotekstabellen skulle "
"läsas in."
#: cvpcb/cvpcb_mainframe.cpp:67 cvpcb/menubar.cpp:51
msgid "Assign Footprints"
msgstr "Tilldela Fotavtryck"
#: cvpcb/cvpcb_mainframe.cpp:111 pcbnew/dialogs/panel_fp_lib_table.cpp:1092
msgid "Footprint Libraries"
msgstr "Fotavtrycksbibliotek"
#: cvpcb/cvpcb_mainframe.cpp:115
msgid "Symbol : Footprint Assignments"
msgstr "Symbol: Fotavtryckstilldelningar"
#: cvpcb/cvpcb_mainframe.cpp:118
msgid "Filtered Footprints"
msgstr "Filtrerade Fotavtryck"
#: cvpcb/cvpcb_mainframe.cpp:152
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:130
msgid "Apply, Save Schematic && Continue"
msgstr "Verkställ, Spara Schemat && Fortsätt"
#: cvpcb/cvpcb_mainframe.cpp:224
msgid "Symbol to footprint changes are unsaved"
msgstr "Ändringar av symbol till fotavtryck är inte sparade"
#: cvpcb/cvpcb_mainframe.cpp:405
msgid "Symbol to Footprint links have been modified. Save changes?"
msgstr "Symbol till Fotavtryckslänkar har ändrats. Spara ändringar?"
#: cvpcb/cvpcb_mainframe.cpp:633 cvpcb/tools/cvpcb_association_tool.cpp:208
#, c-format
msgid "'%s' is not a valid footprint."
msgstr "'%s' är inte ett giltigt fotavtryck."
#: cvpcb/cvpcb_mainframe.cpp:796 eeschema/generate_alias_info.cpp:39
#: eeschema/sch_symbol.cpp:1636 eeschema/sch_symbol.cpp:2116
#: eeschema/symbol_editor/symbol_editor.cpp:1249
#: eeschema/symbol_viewer_frame.cpp:454 pcbnew/footprint.cpp:2884
#: pcbnew/generate_footprint_info.cpp:37 pcbnew/plot_board_layers.cpp:105
msgid "Keywords"
msgstr "Nyckelord"
#: cvpcb/cvpcb_mainframe.cpp:812
msgid "Pin Count"
msgstr "Stiftantal"
#: cvpcb/cvpcb_mainframe.cpp:825 eeschema/sch_base_frame.cpp:576
#: eeschema/sch_symbol.cpp:1619 eeschema/sch_symbol.cpp:1623
#: eeschema/sch_symbol.cpp:1653 pcbnew/tools/pcb_control.cpp:1361
msgid "Library"
msgstr "Bibliotek"
#: cvpcb/cvpcb_mainframe.cpp:838
msgid "Search Text"
msgstr "Söktext"
#: cvpcb/cvpcb_mainframe.cpp:842
msgid "No Filtering"
msgstr "Ingen Filtrering"
#: cvpcb/cvpcb_mainframe.cpp:844
#, c-format
msgid "Filtered by %s"
msgstr "Filtrerad efter %s"
#: cvpcb/cvpcb_mainframe.cpp:858
#, c-format
msgid "Description: %s; Keywords: %s"
msgstr "Beskrivning: %s; Nyckelord: %s"
#: cvpcb/cvpcb_mainframe.cpp:890
#, c-format
msgid "Library location: %s"
msgstr "Biblioteksplats: %s"
#: cvpcb/cvpcb_mainframe.cpp:892
msgid "Library location: unknown"
msgstr "Biblioteksplats: okänd"
#: cvpcb/cvpcb_mainframe.cpp:905
msgid ""
"No PCB footprint libraries are listed in the current footprint library table."
msgstr ""
"Inga PCB-fotavtrycksbibliotek listas i den aktuella tabellen för "
"fotavtrycksbibliotek."
#: cvpcb/cvpcb_mainframe.cpp:906
msgid "Configuration Error"
msgstr "Inställningsfel"
#: cvpcb/cvpcb_mainframe.cpp:910 pcbnew/footprint_edit_frame.cpp:939
#: pcbnew/load_select_footprint.cpp:225
msgid "Loading Footprint Libraries"
msgstr "Laddar Fotavtrycksbibliotek"
#: cvpcb/cvpcb_mainframe.cpp:976
#, c-format
msgid ""
"Error loading schematic.\n"
"%s"
msgstr ""
"Fel vid inläsning av schema.\n"
"%s"
#: cvpcb/dialogs/dialog_config_equfiles.cpp:51
#, c-format
msgid "Project file: '%s'"
msgstr "Projektfil: '%s'"
#: cvpcb/dialogs/dialog_config_equfiles.cpp:103
#: eeschema/dialogs/dialog_bom.cpp:448
#: gerbview/tools/gerbview_inspection_tool.cpp:185
#: kicad/project_tree_pane.cpp:781
msgid "No text editor selected in KiCad. Please choose one."
msgstr "Ingen textredigerare vald i KiCad. Vänligen välj en."
#: cvpcb/dialogs/dialog_config_equfiles.cpp:244
msgid "Footprint Association File"
msgstr "Footprint Association-fil"
#: cvpcb/dialogs/dialog_config_equfiles.cpp:288
#, c-format
msgid "File '%s' already exists in list."
msgstr "Filen '%s' finns redan i listan."
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:20
msgid "Symbol Footprint Association Files (.equ)"
msgstr "Symbol Fotavtryck Association-filer (.equ)"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:36
#: eeschema/sch_base_frame.cpp:284 pcbnew/footprint_libraries_utils.cpp:532
msgid "Add"
msgstr "Lägg till"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:39
msgid "Remove"
msgstr "Ta bort"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:42
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:63
msgid "Move Up"
msgstr "Flytta upp"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:45
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:68
msgid "Move Down"
msgstr "Flytta ner"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:48
msgid "Edit File"
msgstr "Redigera fil"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:63
msgid "Available environment variables for relative paths:"
msgstr "Tillgängliga miljövariabler för relativa sökvägar:"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:81
#: eeschema/dialogs/dialog_label_properties_base.cpp:87
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:59
#: eeschema/dialogs/dialog_rescue_each.cpp:134
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:61
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1041
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:56
#: eeschema/dialogs/panel_sym_lib_table.cpp:311
#: eeschema/fields_grid_table.cpp:339 eeschema/sch_symbol.cpp:1598
#: eeschema/sch_symbol.cpp:1643
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:70
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:70
#: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:44
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:64
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:54
#: pcbnew/dialogs/panel_fp_lib_table.cpp:466 pcbnew/footprint.cpp:2874
#: pcbnew/footprint_wizard_frame.cpp:323 pcbnew/fp_text.cpp:279
#: pcbnew/fp_text_grid_table.cpp:121 pcbnew/pcb_dimension.cpp:306
#: pcbnew/plot_board_layers.cpp:90
msgid "Value"
msgstr "Värde"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:99
#: pcbnew/dialogs/dialog_gendrill_base.cpp:98
msgid "Absolute"
msgstr "Absolut"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:99
msgid "Relative"
msgstr "Relativ"
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:101
msgid "Path Type"
msgstr "Sökvägstyp"
#: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:37
msgid "Ref"
msgstr "Ref"
#: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:38
msgid "Schematic assignment"
msgstr "Schematilldelning"
#: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:41
msgid "Cmp file assignment"
msgstr "Cmp-filtilldelning"
#: cvpcb/dialogs/fp_conflict_assignment_selector_base.cpp:19
msgid ""
"Footprint assignments from schematic netlist and symbol footprint "
"association file (.cmp) are conflicting.\n"
"\n"
"Please choose the assignment."
msgstr ""
"Fotavtryckstilldelningar från kretsschemats nätlista och symbol-fotavtrycks "
"associationsfil (.cmp) är motstridiga.\n"
"\n"
"Vänligen välj tilldelning."
#: cvpcb/dialogs/fp_conflict_assignment_selector_base.h:53
msgid "Footprint Assignment Conflicts"
msgstr "Konflikter vid Tilldelning av Fotavtryck"
#: cvpcb/display_footprints_frame.cpp:72
#: pcbnew/toolbars_footprint_viewer.cpp:176
msgid "Footprint Viewer"
msgstr "Fotavtrycksvisare"
#: cvpcb/display_footprints_frame.cpp:325
#: pcbnew/toolbars_footprint_viewer.cpp:107
msgid "Automatic Zoom on footprint change"
msgstr "Zooma automatiskt vid byte av fotavtryck"
#: cvpcb/display_footprints_frame.cpp:413
#, c-format
msgid "Footprint ID '%s' is not valid."
msgstr "Fotavtryck-ID '%s' är inte giltigt."
#: cvpcb/display_footprints_frame.cpp:428
#, c-format
msgid "Library '%s' is not in the footprint library table."
msgstr "Bibliotek '%s' finns inte i tabellen för fotavtrycksbiblioteket."
#: cvpcb/display_footprints_frame.cpp:437
#: cvpcb/display_footprints_frame.cpp:462
#, c-format
msgid "Footprint '%s' not found."
msgstr "Fotavtryck '%s' hittades inte."
#: cvpcb/display_footprints_frame.cpp:492 pcbnew/footprint.cpp:1063
#, c-format
msgid "Footprint: %s"
msgstr "Fotavtryck: %s"
#: cvpcb/display_footprints_frame.cpp:523
#, c-format
msgid "Lib: %s"
msgstr "Lib: %s"
#: cvpcb/readwrite_dlgs.cpp:119
msgid ""
"Some of the assigned footprints are legacy entries with no library names. "
"Would you like KiCad to attempt to convert them to the new required LIB_ID "
"format? (If you answer no, then these assignments will be cleared and you "
"will need to re-assign them manually.)"
msgstr ""
"Några av de tilldelade fotavtrycken är äldre poster utan biblioteksnamn. "
"Vill du att Kicad ska försöka konvertera dem till det nya obligatoriska "
"LIB_ID-formatet? (Svarar du nej raderas dessa tilldelningar och du måste "
"tilldela dem manuellt.)"
#: cvpcb/readwrite_dlgs.cpp:148
#, c-format
msgid "Component '%s' footprint '%s' <b>not found</b> in any library.\n"
msgstr ""
"Komponenten '%s' fotavtryck '%s' hittades <b>inte</b> i något bibliotek.\n"
#: cvpcb/readwrite_dlgs.cpp:155
#, c-format
msgid "Component '%s' footprint '%s' was found in <b>multiple</b> libraries.\n"
msgstr "Komponent '%s' footprint '%s' hittades i <b>flera</b> bibliotek.\n"
#: cvpcb/readwrite_dlgs.cpp:168
msgid "First check your footprint library table entries."
msgstr "Kontrollera först dina poster i fotavtrycksbibliotekstabellen."
#: cvpcb/readwrite_dlgs.cpp:170
msgid "Problematic Footprint Library Tables"
msgstr "Problematiska tabeller för fotavtrycksbibliotek"
#: cvpcb/readwrite_dlgs.cpp:178
msgid ""
"The following errors occurred attempting to convert the footprint "
"assignments:\n"
"\n"
msgstr ""
"Följande fel inträffade vid försök att konvertera "
"fotavtryckstilldelningarna:\n"
"\n"
#: cvpcb/readwrite_dlgs.cpp:181
msgid ""
"\n"
"You will need to reassign them manually if you want them to be updated "
"correctly the next time you import the netlist in Pcbnew."
msgstr ""
"\n"
"Du måste tilldela dem om manuellt om du vill att de ska uppdateras korrekt "
"nästa gång du importerar nätlistan i Pcbnew."
#: cvpcb/readwrite_dlgs.cpp:307
msgid "Schematic saved"
msgstr "Schema sparat"
#: cvpcb/toolbars_cvpcb.cpp:70
msgid "Footprint Filters:"
msgstr "Fotavtrycksfilter:"
#: cvpcb/tools/cvpcb_actions.cpp:52
msgid "View selected footprint"
msgstr "Visa valt fotavtryck"
#: cvpcb/tools/cvpcb_actions.cpp:53
msgid "View the selected footprint in the footprint viewer"
msgstr "Visa det valda fotavtrycket i fotavtrycksvisaren"
#: cvpcb/tools/cvpcb_actions.cpp:60
msgid "Manage Footprint Association Files"
msgstr "Hantera Fotavtryck Association-filer"
#: cvpcb/tools/cvpcb_actions.cpp:61
msgid ""
"Configure footprint association file (.equ) list. These files are used to "
"automatically assign footprint names from symbol values."
msgstr ""
"Konfigurera lista över fotavtryckassociationsfil (.equ). Dessa filer används "
"för att automatiskt tilldela fotavtrycksnamn från symbolvärden."
#: cvpcb/tools/cvpcb_actions.cpp:67
msgid "Save to Schematic"
msgstr "Spara till Schema"
#: cvpcb/tools/cvpcb_actions.cpp:68
msgid "Save footprint associations in schematic symbol footprint fields"
msgstr ""
"Spara fotavtrycksassociationer i fälten för fotavtryck i kretsschemasymboler"
#: cvpcb/tools/cvpcb_actions.cpp:74
msgid "Save to Schematic and File"
msgstr "Spara till kretsschema och fil"
#: cvpcb/tools/cvpcb_actions.cpp:75
msgid ""
"Save footprint associations in schematic symbol footprint fields and "
"schematic files"
msgstr ""
"Spara fotavtrycksassociationer i kretsschemasymbolernas fält för fotavtryck "
"och i kretsschemafiler"
#: cvpcb/tools/cvpcb_actions.cpp:98
msgid "Select next unassigned symbol"
msgstr "Välj nästa otilldelade symbol"
#: cvpcb/tools/cvpcb_actions.cpp:99
msgid "Select next symbol with no footprint assignment"
msgstr "Välj nästa symbol som inte tilldelats fotavtryck"
#: cvpcb/tools/cvpcb_actions.cpp:105
msgid "Select previous unassigned symbol"
msgstr "Välj föregående otilldelad symbol"
#: cvpcb/tools/cvpcb_actions.cpp:106
msgid "Select previous symbol with no footprint assignment"
msgstr "Välj föregående symbol utan tilldelning av fotavtryck"
#: cvpcb/tools/cvpcb_actions.cpp:115
msgid "Assign footprint"
msgstr "Tilldela fotavtryck"
#: cvpcb/tools/cvpcb_actions.cpp:116
msgid "Assign footprint to selected symbols"
msgstr "Tilldela fotavtryck till valda symboler"
#: cvpcb/tools/cvpcb_actions.cpp:121
msgid "Automatically assign footprints"
msgstr "Tilldela automatiskt fotavtryck"
#: cvpcb/tools/cvpcb_actions.cpp:122
msgid "Perform automatic footprint assignment"
msgstr "Utför automatisk tilldelning av fotavtryck"
#: cvpcb/tools/cvpcb_actions.cpp:128
msgid "Delete association"
msgstr "Ta bort association"
#: cvpcb/tools/cvpcb_actions.cpp:129
msgid "Delete selected footprint associations"
msgstr "Ta bort valda fotavtrycksassociationer"
#: cvpcb/tools/cvpcb_actions.cpp:134 cvpcb/tools/cvpcb_actions.cpp:135
msgid "Delete all footprint associations"
msgstr "Ta bort alla fotavtrycksassociationer"
#: cvpcb/tools/cvpcb_actions.cpp:142
msgid "Use symbol footprint filters"
msgstr "Använd symbolfotavtrycksfilter"
#: cvpcb/tools/cvpcb_actions.cpp:143
msgid "Filter footprint list by footprint filters defined in the symbol"
msgstr ""
"Filtrera fotavtryckslistan efter fotavtrycksfilter definierade i symbolen"
#: cvpcb/tools/cvpcb_actions.cpp:149
msgid "Filter by pin count"
msgstr "Filtrera efter antal stift"
#: cvpcb/tools/cvpcb_actions.cpp:150
msgid "Filter footprint list by pin count"
msgstr "Filtrera fotavtryckslistan efter antal stift"
#: cvpcb/tools/cvpcb_actions.cpp:156
msgid "Filter by library"
msgstr "Filtrera efter bibliotek"
#: cvpcb/tools/cvpcb_actions.cpp:157
msgid "Filter footprint list by library"
msgstr "Filtrera fotavtryckslistan efter bibliotek"
#: cvpcb/tools/cvpcb_association_tool.cpp:255
msgid "Delete all associations?"
msgstr "Radera alla associationer?"
#: eeschema/annotate.cpp:265
#, c-format
msgid "%d duplicate time stamps were found and replaced."
msgstr "%d dubbla tidsstämplar hittades och ersattes."
#: eeschema/annotate.cpp:378
#, c-format
msgid "Updated %s (unit %s) from %s to %s."
msgstr "Uppdaterade %s (enhet %s) från %s till %s."
#: eeschema/annotate.cpp:386
#, c-format
msgid "Updated %s from %s to %s."
msgstr "Uppdaterade %s från %s till %s."
#: eeschema/annotate.cpp:396
#, c-format
msgid "Annotated %s (unit %s) as %s."
msgstr "Numrerade %s (enhet %s) som %s."
#: eeschema/annotate.cpp:403
#, c-format
msgid "Annotated %s as %s."
msgstr "Numrerade %s som %s."
#: eeschema/annotate.cpp:420
msgid "Annotation complete."
msgstr "Annotering slutförd."
#: eeschema/bom_plugins.cpp:46
#, c-format
msgid ""
"Script file:\n"
"%s\n"
"not found. Script not available."
msgstr ""
"Skriptfil:\n"
"%s\n"
"hittades inte. Skriptet är inte tillgängligt."
#: eeschema/component_references_lister.cpp:688
#, c-format
msgid "Item not annotated: %s%s (unit %d)"
msgstr "Komponent inte numrerad: %s%s (enhet %d)"
#: eeschema/component_references_lister.cpp:695
#, c-format
msgid "Item not annotated: %s%s"
msgstr "Komponent inte numrerad: %s%s"
#: eeschema/component_references_lister.cpp:713
#, c-format
msgid "Error: symbol %s%s%s (unit %d) exceeds units defined (%d)"
msgstr "Fel: symbol %s%s%s (enhet %d) överskrider definierade enheter (%d)"
#: eeschema/component_references_lister.cpp:752
#, c-format
msgid "Duplicate items %s%s%s\n"
msgstr "Dubbla objekt %s%s%s\n"
#: eeschema/component_references_lister.cpp:777
#, c-format
msgid "Differing unit counts for item %s%s%s and %s%s%s\n"
msgstr "Olika antal enheter för objekt %s%s%s och %s%s%s\n"
#: eeschema/component_references_lister.cpp:793
#, c-format
msgid "Different values for %s%d%s (%s) and %s%d%s (%s)"
msgstr "Olika värden för %s%d%s (%s) och %s%d%s (%s)"
#: eeschema/connection_graph.cpp:2482 eeschema/connection_graph.cpp:2515
#, c-format
msgid ""
"Both %s and %s are attached to the same items; %s will be used in the netlist"
msgstr ""
"Både %s och %s är kopplade till samma objekt; %s kommer att användas i "
"nätlistan"
#: eeschema/connection_graph.cpp:2784
#, c-format
msgid ""
"Net %s is graphically connected to bus %s but is not a member of that bus"
msgstr "Nät %s är grafiskt anslutet till buss %s men ingår inte i den bussen"
#: eeschema/connection_graph.cpp:3266
#, c-format
msgid "Sheet pin %s has no matching hierarchical label inside the sheet"
msgstr "Arkstift %s har ingen matchande hierarkisk etikett inuti bladet"
#: eeschema/connection_graph.cpp:3283
#, c-format
msgid "Hierarchical label %s has no matching sheet pin in the parent sheet"
msgstr "Hierarkisk etikett %s har inget matchande arkstift i föräldra-arket"
#: eeschema/cross-probing.cpp:164
#, c-format
msgid "%s pin %s found"
msgstr "%s stift %s hittades"
#: eeschema/cross-probing.cpp:166
#, c-format
msgid "%s found but pin %s not found"
msgstr "%s hittades men stift %s hittades inte"
#: eeschema/cross-probing.cpp:170
#, c-format
msgid "%s found"
msgstr "%s hittades"
#: eeschema/cross-probing.cpp:175 eeschema/sim/sim_plot_frame.cpp:604
#: eeschema/sim/sim_plot_frame.cpp:922 eeschema/widgets/tuner_slider.cpp:52
#, c-format
msgid "%s not found"
msgstr "%s hittades inte"
#: eeschema/cross-probing.cpp:216
msgid "Selected net:"
msgstr "Valt nät:"
#: eeschema/dialogs/dialog_annotate.cpp:90
msgid "Annotation Messages:"
msgstr "Annotationsmeddelanden:"
#: eeschema/dialogs/dialog_annotate.cpp:93
msgid "Annotate"
msgstr "Numrera"
#: eeschema/dialogs/dialog_annotate_base.cpp:40
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:25
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:26
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:25
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:27
#: pcbnew/teardrop/dialog_teardrop_base.cpp:347
msgid "Scope"
msgstr "Omfattning"
#: eeschema/dialogs/dialog_annotate_base.cpp:42
msgid "Entire schematic"
msgstr "Hela schemat"
#: eeschema/dialogs/dialog_annotate_base.cpp:45
msgid "Current sheet only"
msgstr "Endast nuvarande blad"
#: eeschema/dialogs/dialog_annotate_base.cpp:48
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:82
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:184
msgid "Selection"
msgstr "Markering"
#: eeschema/dialogs/dialog_annotate_base.cpp:51
msgid "Recurse into subsheets"
msgstr "Gå rekursivt in i underark"
#: eeschema/dialogs/dialog_annotate_base.cpp:58
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:35
msgid "Order"
msgstr "Ordning"
#: eeschema/dialogs/dialog_annotate_base.cpp:63
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:40
msgid "Sort symbols by &X position"
msgstr "Sortera symboler efter &X-position"
#: eeschema/dialogs/dialog_annotate_base.cpp:75
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:52
msgid "Sort symbols by &Y position"
msgstr "Sortera symboler efter &Y-position"
#: eeschema/dialogs/dialog_annotate_base.cpp:90
msgid "Keep existing annotations"
msgstr "Behåll befintliga annoteringar"
#: eeschema/dialogs/dialog_annotate_base.cpp:90
msgid "Reset existing annotations"
msgstr "Återställ befintliga annoteringar"
#: eeschema/dialogs/dialog_annotate_base.cpp:97
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:72
msgid "Numbering"
msgstr "Numrering"
#: eeschema/dialogs/dialog_annotate_base.cpp:104
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:79
msgid "Use first free number after:"
msgstr "Använd första lediga numret efter:"
#: eeschema/dialogs/dialog_annotate_base.cpp:110
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:85
msgid "First free after sheet number X 100"
msgstr "Första lediga efter bladnummer X 100"
#: eeschema/dialogs/dialog_annotate_base.cpp:113
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:88
msgid "First free after sheet number X 1000"
msgstr "Första lediga efter bladnummer X 1000"
#: eeschema/dialogs/dialog_annotate_base.cpp:136
msgid "Clear Annotation"
msgstr "Rensa Annotering"
#: eeschema/dialogs/dialog_annotate_base.h:85
msgid "Annotate Schematic"
msgstr "Numrera komponenter i kretsschema"
#: eeschema/dialogs/dialog_bom.cpp:135
msgid "Generate"
msgstr "Generera"
#: eeschema/dialogs/dialog_bom.cpp:217
msgid "(file missing)"
msgstr "(fil saknas)"
#: eeschema/dialogs/dialog_bom.cpp:294
#, c-format
msgid "The selected BOM generator script %s could not be found."
msgstr ""
"Det valda skriptet %s för generering av komponentlista kunde inte hittas."
#: eeschema/dialogs/dialog_bom.cpp:299
#, c-format
msgid ""
"\n"
"\n"
"Searched:\n"
"\t%s\n"
"\t%s"
msgstr ""
"\n"
"\n"
"Sökte:\n"
"\t%s\n"
"\t%s"
#: eeschema/dialogs/dialog_bom.cpp:345
msgid "Generating BOM requires a fully annotated schematic."
msgstr ""
"För att generera en komponentlista krävs ett fullständigt numrerat schema."
#: eeschema/dialogs/dialog_bom.cpp:382 eeschema/dialogs/dialog_bom_base.cpp:45
msgid "Generator nickname:"
msgstr "Generator smeknamn:"
#: eeschema/dialogs/dialog_bom.cpp:382
msgid "Add Generator"
msgstr "Lägg till generator"
#: eeschema/dialogs/dialog_bom.cpp:391
#, c-format
msgid "Nickname '%s' already in use."
msgstr "Smeknamn '%s' används redan."
#: eeschema/dialogs/dialog_bom.cpp:420
#: eeschema/dialogs/dialog_export_netlist.cpp:751
msgid "Generator File"
msgstr "Generatorfil"
#: eeschema/dialogs/dialog_bom.cpp:439
msgid "Generator file name not found."
msgstr "Generatorfilens namn hittades inte."
#: eeschema/dialogs/dialog_bom.cpp:460
msgid "Bill of Materials Generation Help"
msgstr "Hjälp för generering av materialförteckning"
#: eeschema/dialogs/dialog_bom_base.cpp:27
msgid "BOM generator scripts:"
msgstr "Skript för att generera komponentlista:"
#: eeschema/dialogs/dialog_bom_base.cpp:71
msgid "Add a new BOM generator and its command line to the list"
msgstr "Lägg till en ny komponentlistegenerator och dess kommandorad i listan"
#: eeschema/dialogs/dialog_bom_base.cpp:76
msgid "Edit the script file in the text editor"
msgstr "Redigera skriptfilen i textredigeraren"
#: eeschema/dialogs/dialog_bom_base.cpp:84
msgid "Remove the current generator script from list"
msgstr "Ta bort det aktuella generatorskriptet från listan"
#: eeschema/dialogs/dialog_bom_base.cpp:94
msgid "Command line running the generator:"
msgstr "Kommandorad som kör generatorn:"
#: eeschema/dialogs/dialog_bom_base.cpp:103
msgid "Show console window"
msgstr "Visa konsolfönster"
#: eeschema/dialogs/dialog_bom_base.cpp:104
msgid ""
"By default, command line runs with hidden console window and output is "
"redirected to the info display.\n"
"Set this option to show the window of the running command."
msgstr ""
"Som standard körs kommandoraden med dolt konsolfönster och utdata "
"omdirigeras till informationsdisplayen.\n"
"Välj det här alternativet för att visa fönstret för det körande kommandot."
#: eeschema/dialogs/dialog_bom_base.cpp:118
msgid "Reset the list of BOM generator scripts to the default settings"
msgstr ""
"Återställ listan över skript som genererar komponentlista till "
"standardinställningarna"
#: eeschema/dialogs/dialog_bom_base.h:83
msgid "Bill of Materials"
msgstr "Komponentlista"
#: eeschema/dialogs/dialog_bom_help_md.h:2
msgid ""
"# 1. Summary\n"
"\n"
"The Bill of Materials tool creates a BOM which lists all of the components "
"in the design.\n"
"\n"
"The tool uses an external script to generate a BOM in the desired output "
"format. Choosing a different script changes how the BOM is formatted.\n"
"\n"
"Generating a BOM is described in more detail in the Schematic Editor "
"manual.\n"
"\n"
"# 2. Usage\n"
"\n"
"Select a generator script in the **BOM generator scripts** list. Details for "
"the selected generator are shown on the right of the dialog.\n"
"\n"
"Clicking the **Generate** button creates a BOM file with the selected "
"generator.\n"
"\n"
"The default settings present several generator script options, although some "
"additional scripts are installed with KiCad and can be added to the list "
"with the **+** button.\n"
"\n"
"**Note:** On Windows, there is an additional option **Show console window**. "
"When this option is unchecked, BOM generators run in a hidden console window "
"and any output is redirected and printed in the dialog. When this option is "
"checked, BOM generators run in a visisble console window.\n"
"\n"
"# 3. Custom generators and command lines\n"
"\n"
"Internally, KiCad creates an intermediate netlist file in XML format that "
"contains information about all of the components in the design. A BOM "
"generator script converts the intermediate netlist file to the desired "
"output format. KiCad runs the BOM generator scripts according to the command "
"line entered at the bottom of the BOM dialog.\n"
"\n"
"The command line format accepts parameters for filenames. Each formatting "
"parameter is replaced with a project-specific path or filename. The "
"supported formatting parameters are:\n"
"\n"
" * `%I`: absolute path and filename of the intermediate netlist file, which "
"is the input to the BOM generator\n"
" * `%O`: absolute path and filename of the output BOM file (without file "
"extension)\n"
" * `%B`: base filename of the output BOM file (without file extension)\n"
" * `%P`: absolute path of the project directory, without trailing slash\n"
"\n"
"**Note:** the `%O` output file parameter does not include a file extension. "
"KiCad will attempt to add an appropriate extension to the command line "
"automatically, but an extension may need to be added by hand.\n"
"\n"
"Python is the recommended tool for BOM generator scripts, but other tools "
"can also be used.\n"
"\n"
"## Example command lines for Python scripts\n"
"\n"
"The command line format for a Python script is of the form:\n"
"\n"
"```\n"
"python <script file name> <input filename> <output filename>\n"
"```\n"
"\n"
"On Windows, if the desired generator script for a CSV BOM is `C:"
"\\Users\\username\\kicad\\my_python_script.py`, the command line would be:\n"
"\n"
"```\n"
"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O."
"csv\"\n"
"```\n"
"\n"
"On Linux, if the desired generator script for a CSV BOM is `/home/username/"
"kicad/my_python_script.py`, the command line would be:\n"
"\n"
"```\n"
"python /home/username/kicad/my_python_script.py \"%I\" \"%O.csv\"\n"
"```\n"
"\n"
"Double quotes (`\"`) around the arguments are recommended in case filenames "
"contain spaces or special characters.\n"
msgstr ""
"# 1. Sammanfattning\n"
"\n"
"Verktyget komponentlista skapar en komponentlista som innehåller "
"konstruktionens samtliga komponenter.\n"
"\n"
"Verktyget använder ett externt skript för att generera komponentlistan i det "
"önskade formatet. Val av ett annat skript ändrar komponentlistans "
"formattering.\n"
"\n"
"Kretsschemaredigerarens manual ger mer detaljerad information om generering "
"av komponentlista.\n"
"\n"
"# 2. Användning\n"
"\n"
"Välj ett skript för generering i listan av **skript för generering av "
"komponentlista**. Detaljinformation om det valda skriptet visas på "
"dialogrutans högra sida.\n"
"\n"
"Klick på knappen **Generera** skapar en komponentlistefil med hjälp av det "
"valda skriptet.\n"
"\n"
"Förinställningarna visar flera skript för generering av komponentlista, men "
"några ytterligare skript installeras med KiCad och kan läggas till i listan "
"med hjälp av **+** knappen.\n"
"\n"
"**Notera:** I Windows finns en ytterligare option **Visa kommandofönster**. "
"När denna option inte är markerad, körs komponentlisteskriptet i ett dolt "
"kommandofönster och all utmatning leds om och skrivs ut i dialogrutan. När "
"denna option är markerad körs komponentlisteskriptet i ett synligt "
"kommandofönster.\n"
"\n"
"# 3. Anpassade genereringsskript och kommandorader\n"
"\n"
"KiCad skapar internt en intermediär nätlistefil i XML-format, som innehåller "
"information om alla konstruktionens komponenter. Ett skript för generering "
"av komponentlista konverterar den intermediära nätlistefilen till det "
"önskade utmatningsformatet. KiCad kör skriptet för generering av "
"komponentlistan enligt den kommandorad som matats in i nedre delen av "
"dialogrutan för komponentlista.\n"
"\n"
"Kommandoradsformatet accepterar parametrar för filnamn. Varje "
"formatteringsparameter ersätts med en projektspecifik sökväg eller filnamn. "
"Formatteringsparametrarna som stöds är:\n"
"\n"
" * `%I`: absolut sökväg och filnamn för den intermediära nätlistefilen, som "
"utgör inmatning till komponentlistegeneratorn\n"
" * `%O`: absolut sökväg och filnamn för den utmatade komponentlistefilen "
"(utan filnamnstillägg)\n"
" * `%B`: grundfilnamn för den utmatade komponentlistefilen (utan "
"filnamnstillägg)\n"
" * `%P`: absolut sökväg för projektbiblioteket, utan avslutande snedstreck\n"
"\n"
"**Notera:** utmatningsfilparametern `%O` inkluderar inte ett "
"filnamnstillägg. KiCad försöker lägga till ett lämpligt filnamnstillägg till "
"kommandoraden automatiskt, men det kan också läggas till manuellt.\n"
"\n"
"Python är det rekommenderade verktyget för komponentlistegeneratorskript, "
"men andra verktyg kan också användas.\n"
"\n"
"## Example på kommandorader för Python-skript\n"
"\n"
"Kommandoradsformatet för ett Python-skript har formen:\n"
"\n"
"```\n"
"python <skriptets filnamn> <inmatningsfilnamn> <utmatningsfilnamn>\n"
"```\n"
"\n"
"Om det önskade skriptet för att generera en CSV-komponentlista i Windows är: "
"`C:\\Users\\username\\kicad\\my_python_script.py`, skulle kommandoraden "
"vara:\n"
"\n"
"```\n"
"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O."
"csv\"\n"
"```\n"
"\n"
"Om det önskade skriptet för att generera en CSV-komponentlista i Linux är: `/"
"home/username/kicad/my_python_script.py`, skulle kommandoraden vara:\n"
"\n"
"```\n"
"python /home/username/kicad/my_python_script.py \"%I\" \"%O.csv\"\n"
"```\n"
"\n"
"Dubbla citattecken (`\"`) rekommenderas kring de filnamn som innehåller "
"mellanslag eller specialtecken.\n"
#: eeschema/dialogs/dialog_change_symbols.cpp:66
msgid "Change all symbols in schematic"
msgstr "Ändra alla symboler i schemat"
#: eeschema/dialogs/dialog_change_symbols.cpp:67
msgid "Change Symbols"
msgstr "Ändra Symboler"
#: eeschema/dialogs/dialog_change_symbols.cpp:76
msgid "Change selected symbol(s)"
msgstr "Ändra vald symbol(er)"
#: eeschema/dialogs/dialog_change_symbols.cpp:93
msgid "Change symbols matching reference designator:"
msgstr "Ändra symboler som matchar referensbeteckning:"
#: eeschema/dialogs/dialog_change_symbols.cpp:94
msgid "Change symbols matching value:"
msgstr "Ändra symboler som matchar värdet:"
#: eeschema/dialogs/dialog_change_symbols.cpp:95
msgid "Change symbols matching library identifier:"
msgstr "Ändra symboler som matchar biblioteksidentifieraren:"
#: eeschema/dialogs/dialog_change_symbols.cpp:132
msgid "Update Fields"
msgstr "Uppdatera Fält"
#: eeschema/dialogs/dialog_change_symbols.cpp:133
msgid "Remove fields if not in new symbol"
msgstr "Ta bort fält om de saknas i den nya symbolen"
#: eeschema/dialogs/dialog_change_symbols.cpp:134
msgid "Reset fields if empty in new symbol"
msgstr "Återställ fält om de är tomma i ny symbol"
#: eeschema/dialogs/dialog_change_symbols.cpp:135
msgid "Update field text"
msgstr "Uppdatera fälttext"
#: eeschema/dialogs/dialog_change_symbols.cpp:136
msgid "Update field visibilities"
msgstr "Uppdatera fältets synlighet"
#: eeschema/dialogs/dialog_change_symbols.cpp:137
msgid "Update field sizes and styles"
msgstr "Uppdatera fältstorlekar och stilar"
#: eeschema/dialogs/dialog_change_symbols.cpp:138
msgid "Update field positions"
msgstr "Uppdatera fältpositioner"
#: eeschema/dialogs/dialog_change_symbols.cpp:139
msgid "Update symbol attributes"
msgstr "Uppdatera symbolattribut"
#: eeschema/dialogs/dialog_change_symbols.cpp:154
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:158
msgid "Change"
msgstr "Ändra"
#: eeschema/dialogs/dialog_change_symbols.cpp:154
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:44
#: kicad/pcm/dialogs/dialog_pcm.cpp:105 kicad/pcm/dialogs/panel_package.cpp:62
#: kicad/pcm/dialogs/panel_package.cpp:113
#: kicad/pcm/dialogs/panel_package.cpp:138
#: kicad/pcm/dialogs/panel_package.cpp:146
#: kicad/pcm/dialogs/panel_package_base.cpp:70
#: kicad/pcm/dialogs/panel_packages_view.cpp:706
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:158
msgid "Update"
msgstr "Uppdatera"
#: eeschema/dialogs/dialog_change_symbols.cpp:532
#, c-format
msgid "Update symbol %s from '%s' to '%s'"
msgstr "Uppdatera symbol %s från '%s' till '%s'"
#: eeschema/dialogs/dialog_change_symbols.cpp:539
#, c-format
msgid "Update symbols %s from '%s' to '%s'"
msgstr "Uppdatera symboler %s från '%s' till '%s'"
#: eeschema/dialogs/dialog_change_symbols.cpp:549
#, c-format
msgid "Change symbol %s from '%s' to '%s'"
msgstr "Byt symbol %s från '%s' till '%s'"
#: eeschema/dialogs/dialog_change_symbols.cpp:556
#, c-format
msgid "Change symbols %s from '%s' to '%s'"
msgstr "Byt symboler %s från '%s' till '%s'"
#: eeschema/dialogs/dialog_change_symbols.cpp:567
msgid "*** symbol not found ***"
msgstr "*** symbol hittades inte ***"
#: eeschema/dialogs/dialog_change_symbols.cpp:576
msgid "*** new symbol has too few units ***"
msgstr "*** ny symbol har för få enheter ***"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:27
msgid "Update all symbols in schematic"
msgstr "Uppdatera alla symboler i schemat"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:30
msgid "Update selected symbol(s)"
msgstr "Uppdatera vald symbol(er)"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:33
msgid "Update symbols matching reference designator:"
msgstr "Uppdatera symboler som matchar referensbeteckning:"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:39
msgid "Update symbols matching value:"
msgstr "Uppdatera symboler som matchar värdet:"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:45
msgid "Update symbols matching library identifier:"
msgstr "Uppdatera symboler som matchar biblioteksidentifieraren:"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:72
msgid "New library identifier:"
msgstr "Ny biblioteksidentifierare:"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:94
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:36
msgid "Update/reset Fields"
msgstr "Uppdatera/Återställ Fält"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:108
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:50
msgid "Select None"
msgstr "Avmarkera"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:117
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:59
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:94
msgid "Update Options"
msgstr "Uppdateringsalternativ"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:119
msgid "Remove fields if not in library symbol"
msgstr "Ta bort fält om de inte finns i bibliotekssymbolen"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:120
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:62
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:97
msgid "Removes fields that do not occur in the original library symbols"
msgstr "Tar bort fält som inte förekommer i originalbibliotekets symboler"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:124
msgid "Reset fields if empty in library symbol"
msgstr "Återställ fält om de är tomma i bibliotekssymbolen"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:130
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:72
msgid "Update/reset field text"
msgstr "Uppdatera/återställ fälttext"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:133
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:75
msgid "Update/reset field visibilities"
msgstr "Uppdatera/återställ fältsynlighet"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:136
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:78
msgid "Update/reset field sizes and styles"
msgstr "Uppdatera/återställ fältstorlekar och stilar"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:139
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:81
msgid "Update/reset field positions"
msgstr "Uppdatera/återställ fältpositioner"
#: eeschema/dialogs/dialog_change_symbols_base.cpp:145
msgid "Update/reset symbol attributes"
msgstr "Uppdatera/återställ symbolattribut"
#: eeschema/dialogs/dialog_change_symbols_base.h:100
msgid "Update Symbols from Library"
msgstr "Uppdatera Symboler från Biblioteket"
#: eeschema/dialogs/dialog_choose_symbol.cpp:154
#: pcbnew/dialogs/dialog_choose_footprint.cpp:95
msgid "Select with Browser"
msgstr "Välj med Bläddraren"
#: eeschema/dialogs/dialog_choose_symbol.cpp:158
msgid "Place repeated copies"
msgstr "Placera upprepade kopior"
#: eeschema/dialogs/dialog_choose_symbol.cpp:159
msgid "Keep the symbol selected for subsequent clicks."
msgstr "Håll symbolen vald för efterföljande klick."
#: eeschema/dialogs/dialog_choose_symbol.cpp:161
msgid "Place all units"
msgstr "Placera alla enheter"
#: eeschema/dialogs/dialog_choose_symbol.cpp:162
msgid "Sequentially place all units of the symbol."
msgstr "Placera alla enheter i symbolen sekventiellt."
#: eeschema/dialogs/dialog_choose_symbol.cpp:412
#: eeschema/dialogs/dialog_choose_symbol.cpp:471
#: eeschema/generate_alias_info.cpp:81 eeschema/sch_base_frame.cpp:77
#: eeschema/symbol_editor/symbol_editor.cpp:202
#: eeschema/widgets/symbol_preview_widget.cpp:184
#, c-format
msgid "Error loading symbol %s from library '%s'."
msgstr "Fel vid inläsning av symbolen %s från biblioteket '%s'."
#: eeschema/dialogs/dialog_choose_symbol.cpp:435
msgid "No footprint specified"
msgstr "Inget fotavtryck specificerat"
#: eeschema/dialogs/dialog_choose_symbol.cpp:448
msgid "Invalid footprint specified"
msgstr "Ogiltigt fotavtryck specificerat"
#: eeschema/dialogs/dialog_choose_symbol.cpp:532
#: eeschema/tools/symbol_editor_control.cpp:292
msgid "No symbol selected"
msgstr "Ingen symbol vald"
#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:545
#, c-format
msgid "Symbol library identifier %s is not valid."
msgstr "Symbolbibliotekets identifierare %s är inte giltig."
#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:642
#, c-format
msgid "Available Candidates for %s "
msgstr "Tillgängliga kandidater för %s "
#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:646
#, c-format
msgid "Candidates count %d "
msgstr "Antal kandidater %d "
#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:657
#, c-format
msgid "%u link(s) mapped, %u not found"
msgstr "%u länk(ar) kartlagda, %u hittades inte"
#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:663
#, c-format
msgid "All %u link(s) resolved"
msgstr "Alla %u länk(ar) har lösts"
#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:694
msgid "Invalid symbol library identifier"
msgstr "Ogiltig symbolbiblioteksidentifierare"
#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:745
#, c-format
msgid ""
"Error loading symbol %s from library %s.\n"
"\n"
"%s"
msgstr ""
"Fel vid inläsning av symbol %s från biblioteket %s.\n"
"\n"
"%s"
#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:37
#: eeschema/dialogs/panel_setup_formatting_base.cpp:103
#: eeschema/sch_symbol.cpp:2124
msgid "Symbols"
msgstr "Symboler"
#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:38
msgid "Current Library Reference"
msgstr "Aktuell biblioteksreferens"
#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:39
msgid "New Library Reference"
msgstr "Ny biblioteksreferens"
#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:58
msgid "Map Orphans"
msgstr "Kartlägg föräldralösa/lösryckta"
#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:59
msgid ""
"If some symbols are orphaned (the linked symbol is not found anywhere),\n"
"try to find a candidate having the same name in one of loaded symbol "
"libraries."
msgstr ""
"Om vissa komponenter är föräldralösa (den länkade symbolen finns "
"ingenstans),\n"
"försök hitta en kandidat med samma namn i ett av de laddade "
"symbolbiblioteken."
#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:63
msgid "Update symbol fields from new library"
msgstr "Uppdatera symbolfält från nytt bibliotek"
#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:64
msgid ""
"Replace current symbols fields by fields from the new library.\n"
"Warning: fields \"Value\" and \"Footprints\" will be therefore replaced."
msgstr ""
"Ersätt nuvarande symbolfält med fält från det nya biblioteket.\n"
"Varning: fälten \"Värde\" och \"Fotavtryck\" kommer därför att ersättas."
#: eeschema/dialogs/dialog_edit_symbols_libid_base.h:57
msgid "Symbol Library References"
msgstr "Symbolbiblioteksreferenser"
#: eeschema/dialogs/dialog_erc.cpp:99
msgid "Run ERC"
msgstr "Kör ERC"
#: eeschema/dialogs/dialog_erc.cpp:151
msgid "Show Annotation dialog"
msgstr "Visa dialogrutan Annotering"
#: eeschema/dialogs/dialog_erc.cpp:164
msgid "Schematic is not fully annotated. ERC results will be incomplete."
msgstr ""
"Schemat är inte fullständigt numrerat. ERC-resultaten kommer att vara "
"ofullständiga."
#: eeschema/dialogs/dialog_erc.cpp:299
msgid "Delete exclusions too?"
msgstr "Radera undantag också?"
#: eeschema/dialogs/dialog_erc.cpp:299 eeschema/dialogs/dialog_erc_base.cpp:168
#: pcbnew/dialogs/dialog_drc.cpp:1133 pcbnew/dialogs/dialog_drc_base.cpp:215
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:82
msgid "Delete All Markers"
msgstr "Ta Bort Alla Markörer"
#: eeschema/dialogs/dialog_erc.cpp:301
msgid "Errors and Warnings Only"
msgstr "Endast Fel och Varningar"
#: eeschema/dialogs/dialog_erc.cpp:301
msgid "Errors, Warnings and Exclusions"
msgstr "Fel, Varningar och Undantag"
#: eeschema/dialogs/dialog_erc.cpp:417
#, c-format
msgid "%d symbol(s) require annotation.<br><br>"
msgstr "%d symbol(er) kräver annotering.<br><br>"
#: eeschema/dialogs/dialog_erc.cpp:421
msgid "-------- ERC cancelled by user.<br><br>"
msgstr "-------- ERC avbröts av användaren.<br><br>"
#: eeschema/dialogs/dialog_erc.cpp:423 pcbnew/dialogs/dialog_drc.cpp:312
msgid "Done.<br><br>"
msgstr "Klart.<br><br>"
#: eeschema/dialogs/dialog_erc.cpp:473
msgid "Checking sheet names..."
msgstr "Kontrollerar arknamn..."
#: eeschema/dialogs/dialog_erc.cpp:479
msgid "Checking bus conflicts..."
msgstr "Kontrollerar busskonflikter..."
#: eeschema/dialogs/dialog_erc.cpp:484
msgid "Checking conflicts..."
msgstr "Kontrollerar konflikter ..."
#: eeschema/dialogs/dialog_erc.cpp:488
msgid "Checking units..."
msgstr "Kontrollerar enheter..."
#: eeschema/dialogs/dialog_erc.cpp:493
#: pcbnew/drc/drc_test_provider_footprint_checks.cpp:69
msgid "Checking footprints..."
msgstr "Kontrollerar fotavtryck..."
#: eeschema/dialogs/dialog_erc.cpp:505
msgid "Checking pins..."
msgstr "Kontrollerar stift ..."
#: eeschema/dialogs/dialog_erc.cpp:522
msgid "Checking labels..."
msgstr "Kontrollerar etiketter ..."
#: eeschema/dialogs/dialog_erc.cpp:528
msgid "Checking for unresolved variables..."
msgstr "Söker efter olösta variabler ..."
#: eeschema/dialogs/dialog_erc.cpp:534
msgid "Checking SPICE models..."
msgstr "Kontrollerar SPICE-modeller..."
#: eeschema/dialogs/dialog_erc.cpp:540
msgid "Checking no connect pins for connections..."
msgstr "Kontrollerar ingen anslutning-stift för anslutningar ..."
#: eeschema/dialogs/dialog_erc.cpp:546
msgid "Checking for library symbol issues..."
msgstr "Kontrollerar problem med bibliotekssymboler..."
#: eeschema/dialogs/dialog_erc.cpp:552
msgid "Checking for off grid pins and wires..."
msgstr "Kontrollerar om stift eller ledningar missar rutnätet..."
#: eeschema/dialogs/dialog_erc.cpp:634 pcbnew/dialogs/dialog_drc.cpp:565
msgid "errors"
msgstr "fel"
#: eeschema/dialogs/dialog_erc.cpp:635 pcbnew/dialogs/dialog_drc.cpp:566
msgid "warnings"
msgstr "varningar"
#: eeschema/dialogs/dialog_erc.cpp:636 pcbnew/dialogs/dialog_drc.cpp:567
msgid "appropriate"
msgstr "lämplig"
#: eeschema/dialogs/dialog_erc.cpp:641 pcbnew/dialogs/dialog_drc.cpp:572
msgid "Remove exclusion for this violation"
msgstr "Ta bort undantag för denna överträdelse"
#: eeschema/dialogs/dialog_erc.cpp:642 pcbnew/dialogs/dialog_drc.cpp:573
#, c-format
msgid "It will be placed back in the %s list"
msgstr "Den kommer att placeras tillbaka i %s -listan"
#: eeschema/dialogs/dialog_erc.cpp:646 pcbnew/dialogs/dialog_drc.cpp:584
msgid "Exclude this violation"
msgstr "Undanta denna överträdelse"
#: eeschema/dialogs/dialog_erc.cpp:647 pcbnew/dialogs/dialog_drc.cpp:585
#, c-format
msgid "It will be excluded from the %s list"
msgstr "Det kommer att uteslutas från %s -listan"
#: eeschema/dialogs/dialog_erc.cpp:659 pcbnew/dialogs/dialog_drc.cpp:619
#, c-format
msgid "Change severity to Error for all '%s' violations"
msgstr "Ändra allvarlighetsgraden till Fel för alla överträdelser av '%s'"
#: eeschema/dialogs/dialog_erc.cpp:661 eeschema/dialogs/dialog_erc.cpp:667
#: pcbnew/dialogs/dialog_drc.cpp:621 pcbnew/dialogs/dialog_drc.cpp:628
msgid "Violation severities can also be edited in the Board Setup... dialog"
msgstr ""
"Överträdelsens allvarlighetsgrad kan också redigeras i dialogrutan "
"\"Mönsterkortsinställningar...\""
#: eeschema/dialogs/dialog_erc.cpp:665 pcbnew/dialogs/dialog_drc.cpp:626
#, c-format
msgid "Change severity to Warning for all '%s' violations"
msgstr "Ändra allvarlighetsgrad till Varning för alla överträdelser av '%s'"
#: eeschema/dialogs/dialog_erc.cpp:670 pcbnew/dialogs/dialog_drc.cpp:632
#, c-format
msgid "Ignore all '%s' violations"
msgstr "Ignorera alla överträdelser av '%s'"
#: eeschema/dialogs/dialog_erc.cpp:671 pcbnew/dialogs/dialog_drc.cpp:634
msgid "Violations will not be checked or reported"
msgstr "Överträdelser kommer inte att kontrolleras eller rapporteras"
#: eeschema/dialogs/dialog_erc.cpp:678
msgid "Edit pin-to-pin conflict map..."
msgstr "Redigera konfliktkartan för stift till stift..."
#: eeschema/dialogs/dialog_erc.cpp:682 pcbnew/dialogs/dialog_drc.cpp:639
msgid "Edit violation severities..."
msgstr "Redigera allvarlighetsgraden för överträdelser..."
#: eeschema/dialogs/dialog_erc.cpp:683 eeschema/dialogs/dialog_erc.cpp:876
msgid "Open the Schematic Setup... dialog"
msgstr "Öppna dialogrutan \"Kretsschemainställningar...\""
#: eeschema/dialogs/dialog_erc.cpp:775
#: eeschema/dialogs/dialog_schematic_setup.cpp:81
msgid "Pin Conflicts Map"
msgstr "Stiftkonfliktskarta"
#: eeschema/dialogs/dialog_erc.cpp:779 eeschema/dialogs/dialog_erc.cpp:881
#: eeschema/dialogs/dialog_schematic_setup.cpp:80
#: pcbnew/dialogs/dialog_board_setup.cpp:114 pcbnew/dialogs/dialog_drc.cpp:802
#: pcbnew/dialogs/dialog_drc.cpp:817
msgid "Violation Severity"
msgstr "Överträdelsens allvarlighetsgrad"
#: eeschema/dialogs/dialog_erc.cpp:876
msgid "Edit ignored violations..."
msgstr "Ändra ignorerade regelöverträdelser..."
#: eeschema/dialogs/dialog_erc.cpp:949 pcbnew/dialogs/dialog_gendrill.cpp:487
#, c-format
msgid "Report file '%s' created."
msgstr "Rapportfil %s skapad."
#: eeschema/dialogs/dialog_erc.cpp:967
#, c-format
msgid "ERC report (%s, Encoding UTF8)\n"
msgstr "ERC-rapport (%s, Kodning UTF8)\n"
#: eeschema/dialogs/dialog_erc.cpp:982
#, c-format
msgid ""
"\n"
"***** Sheet %s\n"
msgstr ""
"\n"
"***** Ark %s\n"
#: eeschema/dialogs/dialog_erc.cpp:1006
#, c-format
msgid ""
"\n"
" ** ERC messages: %d Errors %d Warnings %d\n"
msgstr ""
"\n"
" ** ERC-meddelanden: %d Fel %d Varningar %d\n"
#: eeschema/dialogs/dialog_erc_base.cpp:59
#: pcbnew/dialogs/dialog_drc_base.cpp:77
msgid "Tests Running..."
msgstr "Tester som körs ..."
#: eeschema/dialogs/dialog_erc_base.cpp:78
#: pcbnew/dialogs/dialog_drc_base.cpp:99
msgid "Click on items to highlight them on the board."
msgstr "Klicka på objekt för att markera dem på tavlan."
#: eeschema/dialogs/dialog_erc_base.cpp:87
#: pcbnew/dialogs/dialog_drc_base.cpp:107
#, c-format
msgid "Violations (%s)"
msgstr "Överträdelser (%s)"
#: eeschema/dialogs/dialog_erc_base.cpp:99
#: pcbnew/dialogs/dialog_drc_base.cpp:149
#, c-format
msgid "Ignored Tests (%s)"
msgstr "Ignorerade test (%s)"
#: eeschema/dialogs/dialog_erc_base.cpp:139
#: pcbnew/dialogs/dialog_drc_base.cpp:189
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:55
msgid "Exclusions"
msgstr "Uteslutning"
#: eeschema/dialogs/dialog_erc_base.cpp:165
#: pcbnew/dialogs/dialog_drc_base.cpp:212
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:79
msgid "Delete Marker"
msgstr "Ta bort markör"
#: eeschema/dialogs/dialog_erc_base.h:100 eeschema/tools/ee_actions.cpp:45
msgid "Electrical Rules Checker"
msgstr "Kontrollera elektriska regler"
#: eeschema/dialogs/dialog_export_netlist.cpp:274
#: eeschema/dialogs/dialog_export_netlist_base.h:73
msgid "Export Netlist"
msgstr "Exportera nätlista"
#: eeschema/dialogs/dialog_export_netlist.cpp:317
#: eeschema/sim/sim_plot_frame.cpp:468
msgid "Simulator requires a fully annotated schematic."
msgstr "Simulatorn kräver ett fullständigt numrerat schema."
#: eeschema/dialogs/dialog_export_netlist.cpp:345
#: eeschema/dialogs/dialog_export_netlist.cpp:392
msgid "Use current sheet as root"
msgstr "Använd aktuellt ark som rot"
#: eeschema/dialogs/dialog_export_netlist.cpp:346
#: eeschema/dialogs/dialog_export_netlist.cpp:393
msgid "Export netlist only for the current sheet"
msgstr "Exportera nätlista endast för aktuellt ark"
#: eeschema/dialogs/dialog_export_netlist.cpp:351
msgid "Save all voltages"
msgstr "Spara alla spänningar"
#: eeschema/dialogs/dialog_export_netlist.cpp:352
msgid "Write a directive to save all voltages (.save all)"
msgstr "Skriv ett direktiv för att spara alla spänningar (.save all)"
#: eeschema/dialogs/dialog_export_netlist.cpp:357
msgid "Save all currents"
msgstr "Spara alla strömmar"
#: eeschema/dialogs/dialog_export_netlist.cpp:358
msgid "Write a directive to save all currents (.probe alli)"
msgstr "Skriv ett direktiv för att spara alla strömmar (.probe alli)"
#: eeschema/dialogs/dialog_export_netlist.cpp:364
msgid "External simulator command:"
msgstr "Externt simulatorkommando:"
#: eeschema/dialogs/dialog_export_netlist.cpp:365
msgid ""
"Enter the command line to run spice\n"
"Usually <path to spice binary> %I\n"
"%I will be replaced by the actual spice netlist name"
msgstr ""
"Ange kommandoraden för att köra Spice\n"
"Vanligtvis <sökväg till Spice-binär> %I\n"
"%I kommer att ersättas med det faktiska namnet på Spice-nätlistan"
#: eeschema/dialogs/dialog_export_netlist.cpp:379
msgid "Create Netlist and Run Simulator Command"
msgstr "Skapa nätlista och kör simulatorkommando"
#: eeschema/dialogs/dialog_export_netlist.cpp:443
msgid "Netlist command:"
msgstr "Netlist-kommando:"
#: eeschema/dialogs/dialog_export_netlist.cpp:487
msgid "Save Netlist File"
msgstr "Spara Netlist-fil"
#: eeschema/dialogs/dialog_export_netlist.cpp:535
#, c-format
msgid "%s Export"
msgstr "%s Exportera"
#: eeschema/dialogs/dialog_export_netlist.cpp:564
#: eeschema/netlist_exporters/netlist_generator.cpp:55
msgid "Exporting netlist requires a fully annotated schematic."
msgstr "Export av nätlistan kräver ett fullständigt numrerat schema."
#: eeschema/dialogs/dialog_export_netlist.cpp:694
msgid "This plugin already exists."
msgstr "Det här pluginet finns redan."
#: eeschema/dialogs/dialog_export_netlist.cpp:727
msgid "You must provide a netlist generator command string"
msgstr "Du måste tillhandahålla en kommandosträng för nätliste-generatorn"
#: eeschema/dialogs/dialog_export_netlist.cpp:733
msgid "You must provide a netlist generator title"
msgstr "Du måste tillhandahålla en titel till netläste-generatorn"
#: eeschema/dialogs/dialog_export_netlist_base.cpp:52
msgid "Add Generator..."
msgstr "Lägg till generator ..."
#: eeschema/dialogs/dialog_export_netlist_base.cpp:55
msgid "Remove Generator"
msgstr "Ta bort generatorn"
#: eeschema/dialogs/dialog_export_netlist_base.cpp:96
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:32
#: eeschema/symbol_editor/symbol_editor.cpp:554
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:27
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:31
#: pcbnew/footprint_libraries_utils.cpp:1063
msgid "Name:"
msgstr "Namn:"
#: eeschema/dialogs/dialog_export_netlist_base.cpp:103
msgid "Command line to run the generator:"
msgstr "Kommandorad för att köra generatorn:"
#: eeschema/dialogs/dialog_export_netlist_base.cpp:118
msgid "Browse Generators..."
msgstr "Bläddra i generatorer ..."
#: eeschema/dialogs/dialog_export_netlist_base.h:112
msgid "Script Generator Properties"
msgstr "Skriptgeneratoregenskaper"
#: eeschema/dialogs/dialog_field_properties.cpp:190
msgid "Power symbol value field text cannot be changed."
msgstr "Fälttexten för kraftsymbolens värde kan inte ändras."
#: eeschema/dialogs/dialog_field_properties.cpp:362
msgid "Illegal reference designator value!"
msgstr "Olagligt referensbeteckningsvärde!"
#: eeschema/dialogs/dialog_field_properties.cpp:370
msgid "Value may not be empty."
msgstr "Värdet kan inte utelämnas."
#: eeschema/dialogs/dialog_field_properties.cpp:503
msgid "Sheet filename can only be modified in Sheet Properties dialog."
msgstr "Bladets filnamn kan bara modifieras i dialogrutan för bladegenskaper."
#: eeschema/dialogs/dialog_field_properties.cpp:676
#: eeschema/dialogs/dialog_label_properties.cpp:468
msgid ""
"Intersheet reference visibility is controlled globally from Schematic Setup "
"> General > Formatting"
msgstr ""
"Synligheten för referenser mellan ark styrs globalt från "
"Kretsschemainställningar > Allmänt > Formatering"
#: eeschema/dialogs/dialog_field_properties_base.cpp:32
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:32
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:27
#: eeschema/dialogs/dialog_text_properties_base.cpp:36
#: pcbnew/dialogs/dialog_text_properties.cpp:93
#: pcbnew/dialogs/dialog_text_properties_base.cpp:26
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:26
msgid "Text:"
msgstr "Text:"
#: eeschema/dialogs/dialog_field_properties_base.cpp:77
#, c-format
msgid "(%s)"
msgstr "(%s)"
#: eeschema/dialogs/dialog_field_properties_base.cpp:93
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:298
msgid "Show field name"
msgstr "Visa fältnamn"
#: eeschema/dialogs/dialog_field_properties_base.cpp:95
msgid "Show the field name in addtion to its value"
msgstr "Visa fältets namn i tillägg till dess värde"
#: eeschema/dialogs/dialog_field_properties_base.cpp:102
msgid "Allow autoplacement"
msgstr "Tillåt automatisk placering"
#: eeschema/dialogs/dialog_field_properties_base.cpp:105
msgid "Allow automatic placement of this field in the schematic"
msgstr "Tillåt automatisk placering av detta fält i kretsschemat"
#: eeschema/dialogs/dialog_field_properties_base.cpp:118
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:170
#: eeschema/dialogs/dialog_label_properties_base.cpp:189
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:67
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:65
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:81
#: eeschema/dialogs/dialog_text_properties_base.cpp:85
#: pagelayout_editor/dialogs/properties_frame_base.cpp:150
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:218
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:170
#: pcbnew/dialogs/dialog_text_properties_base.cpp:111
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:83
msgid "Font:"
msgstr "Typsnitt:"
#: eeschema/dialogs/dialog_field_properties_base.cpp:122
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:174
#: eeschema/dialogs/dialog_label_properties_base.cpp:193
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:71
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:69
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:85
#: eeschema/dialogs/dialog_text_properties_base.cpp:89
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:37
#: pagelayout_editor/dialogs/properties_frame_base.cpp:154
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:222
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:174
#: pcbnew/dialogs/dialog_text_properties_base.cpp:115
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:87
msgid "KiCad Font"
msgstr "KiCad-typsnitt"
#: eeschema/dialogs/dialog_field_properties_base.cpp:152
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:116
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:99
#: eeschema/dialogs/dialog_text_properties_base.cpp:119
#: eeschema/sch_label.cpp:894 eeschema/sch_text.cpp:516
msgid "Align left"
msgstr "Vänsterjusterat"
#: eeschema/dialogs/dialog_field_properties_base.cpp:157
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:121
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:104
#: eeschema/dialogs/dialog_text_properties_base.cpp:124
msgid "Align horizontal center"
msgstr "Horisontellt centrerat"
#: eeschema/dialogs/dialog_field_properties_base.cpp:162
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:126
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:109
#: eeschema/dialogs/dialog_text_properties_base.cpp:129
#: eeschema/sch_label.cpp:892 eeschema/sch_text.cpp:514
msgid "Align right"
msgstr "Högerjusterat"
#: eeschema/dialogs/dialog_field_properties_base.cpp:172
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:136
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:119
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:124
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:129
#: eeschema/dialogs/dialog_text_properties_base.cpp:139
#: eeschema/sch_label.cpp:895 eeschema/sch_text.cpp:517
msgid "Align top"
msgstr "Vertikal justering längst upp"
#: eeschema/dialogs/dialog_field_properties_base.cpp:177
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:141
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:144
#: eeschema/dialogs/dialog_text_properties_base.cpp:144
msgid "Align vertical center"
msgstr "Vertikalt centrerat"
#: eeschema/dialogs/dialog_field_properties_base.cpp:182
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:146
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:139
#: eeschema/dialogs/dialog_text_properties_base.cpp:149
#: eeschema/sch_label.cpp:893 eeschema/sch_text.cpp:515
msgid "Align bottom"
msgstr "Vertikal justering längst ned"
#: eeschema/dialogs/dialog_field_properties_base.cpp:192
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:86
#: eeschema/dialogs/dialog_text_properties_base.cpp:159
msgid "Horizontal text"
msgstr "Horisontell text"
#: eeschema/dialogs/dialog_field_properties_base.cpp:197
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:91
#: eeschema/dialogs/dialog_text_properties_base.cpp:164
msgid "Vertical text"
msgstr "Vertikal text"
#: eeschema/dialogs/dialog_field_properties_base.cpp:209
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:195
#: eeschema/dialogs/dialog_label_properties_base.cpp:244
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:158
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:167
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:117
#: eeschema/dialogs/dialog_text_properties_base.cpp:176
msgid "Text size:"
msgstr "Textstorlek:"
#: eeschema/dialogs/dialog_field_properties_base.cpp:223
#: eeschema/dialogs/dialog_junction_props_base.cpp:38
#: eeschema/dialogs/dialog_label_properties_base.cpp:258
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:57
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:172
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:181
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:224
#: eeschema/dialogs/dialog_line_properties_base.cpp:45
#: eeschema/dialogs/dialog_shape_properties_base.cpp:56
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:131
#: eeschema/dialogs/dialog_text_properties_base.cpp:190
#: eeschema/dialogs/dialog_text_properties_base.cpp:230
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:45
msgid "Color:"
msgstr "Färg:"
#: eeschema/dialogs/dialog_field_properties_base.cpp:246
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:288
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:61
#: pcbnew/dialogs/dialog_text_properties_base.cpp:204
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:170
msgid "Position X:"
msgstr "Position X:"
#: eeschema/dialogs/dialog_field_properties_base.cpp:257
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:314
#: pcbnew/dialogs/dialog_text_properties_base.cpp:217
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:181
msgid "Position Y:"
msgstr "Position Y:"
#: eeschema/dialogs/dialog_field_properties_base.cpp:268
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:198
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:288
msgid "Common to all units"
msgstr "Gemensamt för alla enheter"
#: eeschema/dialogs/dialog_field_properties_base.cpp:271
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:201
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:291
msgid "Common to all body styles"
msgstr "Gemensamt för alla kroppsstilar"
#: eeschema/dialogs/dialog_field_properties_base.h:102
#: eeschema/dialogs/dialog_lib_text_properties_base.h:90
msgid "Text Item Properties"
msgstr "Egenskaper för textobjekt"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:33
msgid "Other symbol fields"
msgstr "Andra symbolfält"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:39
msgid "Wires && wire labels"
msgstr "Ledningar && ledningsetiketter"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:42
msgid "Buses && bus labels"
msgstr "Bussar && buss etiketter"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:54
msgid "Sheet titles"
msgstr "Arktitlar"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:57
msgid "Other sheet fields"
msgstr "Andra arkfält"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:63
msgid "Sheet borders && backgrounds"
msgstr "Arkgränser && bakgrunder"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:76
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:53
msgid "Filters"
msgstr "Filter"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:84
msgid "Filter other symbol fields by name:"
msgstr "Filtrera andra symbolfält efter namn:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:96
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:73
msgid "Filter items by parent reference designator:"
msgstr "Filtrera objekt efter överordnad referensbeteckning:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:104
msgid "Filter items by parent symbol library id:"
msgstr "Filtrera objekt efter överordnat symbolbiblioteks-id:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:110
msgid "Filter items by parent symbol type:"
msgstr "Filtrera objekt efter överordnad symboltyp:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:113
msgid "Non-power symbols"
msgstr "Icke-kraftsymboler"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:113
msgid "Power symbols"
msgstr "Kraftsymbol"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:125
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:51
msgid "Filter items by net:"
msgstr "Filtrera objekt efter nät:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:137
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:85
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:77
msgid "Only include selected items"
msgstr "Inkludera bara valda objekt"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:156
msgid "Set To"
msgstr "Satt till"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:186
msgid "Text color:"
msgstr "Textfärg:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:221
#: eeschema/pin_type.cpp:129
msgid "Up"
msgstr "Upp"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:221
#: eeschema/pin_type.cpp:130
msgid "Down"
msgstr "Ner"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:221
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:261
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:285
#: include/widgets/ui_common.h:43
msgid "-- leave unchanged --"
msgstr "- lämna oförändrat -"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:257
msgid "H Align:"
msgstr "H Rikta in:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:267
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:277
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:291
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:301
msgid "(fields only)"
msgstr "(endast fält)"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:281
msgid "V Align:"
msgstr "V Justera:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:323
#: pagelayout_editor/dialogs/properties_frame_base.cpp:353
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:161
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1257
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1498
msgid "Line width:"
msgstr "Linjebredd:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:337
msgid "Line color:"
msgstr "Linjefärg:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:346
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:172
msgid "Line style:"
msgstr "Stil för linje:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:362
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:265
#: eeschema/dialogs/dialog_shape_properties_base.cpp:94
#: eeschema/dialogs/dialog_text_properties_base.cpp:268
msgid "Fill color:"
msgstr "Fyllningsfärg:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:371
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:71
msgid "Junction size:"
msgstr "Knutpunktsstorlek:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:385
msgid "Junction color:"
msgstr "Knutpunktsfärg:"
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.h:125
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.h:102
msgid "Edit Text and Graphic Properties"
msgstr "Redigera text- och grafiska egenskaper"
#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:31
msgid "symbol"
msgstr "symbol"
#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:60
#, c-format
msgid ""
"Error creating symbol library table '%s'.\n"
"%s"
msgstr ""
"Fel vid skapande av bibliotekstabell '%s'.\n"
"%s"
#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:74
msgid "Please select a symbol library table file."
msgstr "Välj en symbolbibliotekstabellfil."
#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:83
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:82
#: pcbnew/footprint_libraries_utils.cpp:257
#, c-format
msgid "File '%s' not found."
msgstr "Filen %s fanns ej."
#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:96
#, c-format
msgid ""
"Error reading symbol library table '%s'.\n"
"%s"
msgstr ""
"Fel vid inläsning av symbolbibliotekstabell '%s'.\n"
"%s"
#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:108
#, c-format
msgid "Cannot create global library table '%s'."
msgstr "Kan inte skapa global bibliotekstabell '%s'."
#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:116
#, c-format
msgid "Error copying global symbol library table '%s' to '%s'."
msgstr "Det går inte att kopiera global symbolbibliotekstabell '%s' till '%s'."
#: eeschema/dialogs/dialog_ibis_parser_reporter.cpp:31
msgid "Ibis parser log"
msgstr "Ibis-tolkningslogg"
#: eeschema/dialogs/dialog_ibis_parser_reporter_base.h:46
msgid "Ibis parser"
msgstr "Ibis-tolk"
#: eeschema/dialogs/dialog_junction_props_base.cpp:27
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:46
#: pcbnew/dialogs/dialog_pad_properties.cpp:1695
#: pcbnew/dialogs/dialog_pad_properties.cpp:1707
msgid "Diameter:"
msgstr "Diameter:"
#: eeschema/dialogs/dialog_junction_props_base.cpp:61
msgid "Set diameter to 0 to use schematic's junction dot size."
msgstr "Sätt diametern till 0 för att använda kretsschemats knutpunktsstorlek."
#: eeschema/dialogs/dialog_junction_props_base.cpp:65
#: eeschema/dialogs/dialog_line_properties_base.cpp:83
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:94
msgid "Clear color to use Schematic Editor colors."
msgstr "Rensa färg för att använda kretsschemaredigerarens färger."
#: eeschema/dialogs/dialog_junction_props_base.h:59
msgid "Junction Properties"
msgstr "Knutpunktens egenskaper"
#: eeschema/dialogs/dialog_label_properties.cpp:95
msgid "Pin length:"
msgstr "Stiftlängd:"
#: eeschema/dialogs/dialog_label_properties.cpp:100
msgid "Global Label Properties"
msgstr "Globala etikettegenskaper"
#: eeschema/dialogs/dialog_label_properties.cpp:101
msgid "Hierarchical Label Properties"
msgstr "Egenskaper för hierarkiska etiketter"
#: eeschema/dialogs/dialog_label_properties.cpp:102
#: eeschema/dialogs/dialog_label_properties_base.h:118
msgid "Label Properties"
msgstr "Etikettegenskaper"
#: eeschema/dialogs/dialog_label_properties.cpp:103
msgid "Directive Label Properties"
msgstr "Egenskaper för direktivetiketter"
#: eeschema/dialogs/dialog_label_properties.cpp:104
msgid "Hierarchical Sheet Pin Properties"
msgstr "Hierarkiska arks stiftegenskaper"
#: eeschema/dialogs/dialog_label_properties.cpp:446
msgid "Label can not be empty."
msgstr "Etikett kan inte utelämnas."
#: eeschema/dialogs/dialog_label_properties.cpp:651
msgid "The first field is mandatory."
msgstr "Det första fältet är obligatoriskt."
#: eeschema/dialogs/dialog_label_properties_base.cpp:31
#: eeschema/dialogs/dialog_label_properties_base.cpp:40
msgid "Label:"
msgstr "Etikett:"
#: eeschema/dialogs/dialog_label_properties_base.cpp:33
msgid "Enter the text to be used within the schematic"
msgstr "Ange texten som ska användas i schemat"
#: eeschema/dialogs/dialog_label_properties_base.cpp:50
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:159
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:42
#: eeschema/dialogs/dialog_text_properties_base.cpp:77
#: pcbnew/dialogs/panel_setup_rules_base.cpp:33
msgid "Syntax help"
msgstr "Syntaxhjälp"
#: eeschema/dialogs/dialog_label_properties_base.cpp:51
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:160
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:43
#: eeschema/dialogs/dialog_text_properties_base.cpp:78
#: pcbnew/dialogs/panel_setup_rules_base.cpp:34
msgid "Show syntax help window"
msgstr "Visa syntaxhjälpsfönster"
#: eeschema/dialogs/dialog_label_properties_base.cpp:59
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:31
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:33
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:28
msgid "Fields"
msgstr "Fält"
#: eeschema/dialogs/dialog_label_properties_base.cpp:88
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:60
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:62
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:767
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:57
#: eeschema/fields_grid_table.cpp:340
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:54
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:54
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:53
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:46
#: pcbnew/dialogs/panel_fp_properties_3d_model_base.cpp:36
#: pcbnew/fp_text_grid_table.cpp:101
msgid "Show"
msgstr "Visa"
#: eeschema/dialogs/dialog_label_properties_base.cpp:89
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:61
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:63
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:58
#: eeschema/fields_grid_table.cpp:342
msgid "H Align"
msgstr "H justering"
#: eeschema/dialogs/dialog_label_properties_base.cpp:90
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:62
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:64
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:59
#: eeschema/fields_grid_table.cpp:343
msgid "V Align"
msgstr "V justering"
#: eeschema/dialogs/dialog_label_properties_base.cpp:93
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:65
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:67
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:62
#: eeschema/fields_grid_table.cpp:346 eeschema/lib_field.cpp:540
#: eeschema/lib_text.cpp:404 eeschema/lib_textbox.cpp:476
#: eeschema/sch_field.cpp:772 eeschema/sch_label.cpp:888
#: eeschema/sch_text.cpp:510 eeschema/sch_textbox.cpp:455
#: pcbnew/tools/board_inspection_tool.cpp:1230
msgid "Text Size"
msgstr "Textstorlek"
#: eeschema/dialogs/dialog_label_properties_base.cpp:95
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:128
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:96
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:67
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:69
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:64
#: eeschema/fields_grid_table.cpp:348
msgid "X Position"
msgstr "X-position"
#: eeschema/dialogs/dialog_label_properties_base.cpp:96
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:129
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:97
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:68
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:70
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:65
#: eeschema/fields_grid_table.cpp:349
msgid "Y Position"
msgstr "Y-position"
#: eeschema/dialogs/dialog_label_properties_base.cpp:97
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:69
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:71
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:66
#: eeschema/fields_grid_table.cpp:350 eeschema/lib_field.cpp:536
#: eeschema/lib_text.cpp:400 eeschema/lib_textbox.cpp:470
#: eeschema/sch_field.cpp:768 eeschema/sch_label.cpp:882
#: eeschema/sch_text.cpp:504 eeschema/sch_textbox.cpp:449
#: pcbnew/fp_text.cpp:309 pcbnew/fp_textbox.cpp:315
#: pcbnew/pcb_dimension.cpp:329 pcbnew/pcb_text.cpp:142
#: pcbnew/pcb_textbox.cpp:309
msgid "Font"
msgstr "Typsnitt"
#: eeschema/dialogs/dialog_label_properties_base.cpp:119
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:90
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:93
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:88
msgid "Add field"
msgstr "Lägg till fält"
#: eeschema/dialogs/dialog_label_properties_base.cpp:137
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:108
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:111
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:106
msgid "Delete field"
msgstr "Ta bort fält"
#: eeschema/dialogs/dialog_label_properties_base.cpp:152
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:55
#: eeschema/pin_type.cpp:52 eeschema/pin_type.cpp:244
#: eeschema/sch_label.cpp:145
msgid "Input"
msgstr "Indata"
#: eeschema/dialogs/dialog_label_properties_base.cpp:155
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:58
#: eeschema/pin_type.cpp:53 eeschema/pin_type.cpp:245
#: eeschema/sch_label.cpp:146
msgid "Output"
msgstr "Utdata"
#: eeschema/dialogs/dialog_label_properties_base.cpp:158
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:61
#: eeschema/pin_type.cpp:54 eeschema/pin_type.cpp:246
#: eeschema/sch_label.cpp:147
msgid "Bidirectional"
msgstr "Dubbelriktad"
#: eeschema/dialogs/dialog_label_properties_base.cpp:161
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:64
#: eeschema/pin_type.cpp:55 eeschema/pin_type.cpp:247
msgid "Tri-state"
msgstr "Tretillstånds"
#: eeschema/dialogs/dialog_label_properties_base.cpp:164
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:67
#: eeschema/pin_type.cpp:56 eeschema/pin_type.cpp:248
#: eeschema/sch_label.cpp:149
msgid "Passive"
msgstr "Passiv"
#: eeschema/dialogs/dialog_label_properties_base.cpp:167
msgid "Dot"
msgstr "Punkt"
#: eeschema/dialogs/dialog_label_properties_base.cpp:173
msgid "Diamond"
msgstr "Diamant"
#: eeschema/dialogs/dialog_label_properties_base.cpp:183
#: eeschema/dialogs/dialog_schematic_setup.cpp:76
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:74
#: pcbnew/dialogs/dialog_board_setup.cpp:106
msgid "Formatting"
msgstr "Formatering"
#: eeschema/dialogs/dialog_label_properties_base.cpp:233
#: pcbnew/dialogs/dialog_plot_base.cpp:122
msgid "Auto"
msgstr "Auto"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:44
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:45
msgid "ALL"
msgstr "ALLA"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:46
msgid "Standard"
msgstr "Standard"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:47
msgid "Alternate"
msgstr "Alternativ"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:119
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:87
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:38
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:231
msgid "Count"
msgstr "Antal"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:120
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:88
#: eeschema/dialogs/dialog_symbol_properties.cpp:159 eeschema/lib_pin.cpp:1146
#: eeschema/sch_pin.cpp:218
msgid "Number"
msgstr "Siffra"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:122
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:90
#: eeschema/dialogs/dialog_pin_properties.cpp:54
#: eeschema/dialogs/dialog_pin_properties_base.cpp:213
#: eeschema/dialogs/dialog_symbol_properties.cpp:162
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:281
msgid "Electrical Type"
msgstr "Elektrisk typ"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:123
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:91
#: eeschema/dialogs/dialog_pin_properties.cpp:55
#: eeschema/dialogs/dialog_pin_properties_base.cpp:214
#: eeschema/dialogs/dialog_symbol_properties.cpp:163
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:282
msgid "Graphic Style"
msgstr "Grafisk stil"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:125
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:93
msgid "Number Text Size"
msgstr "Nummertextstorlek"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:126
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:94
msgid "Name Text Size"
msgstr "Namn Textstorlek"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:132
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:100
#, fuzzy
msgid "De Morgan"
msgstr "De Morgan-standard"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:826
#: eeschema/dialogs/dialog_lib_shape_properties.cpp:72
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:95
#: eeschema/dialogs/dialog_lib_text_properties.cpp:108
msgid "Read Only"
msgstr "Enbart läsrättighet"
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:1164
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1462
msgid "Save changes?"
msgstr "Vill du spara ändringarna?"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:26
msgid "Pin numbers:"
msgstr "Stiftnummer:"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:30
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:41
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:52
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:151
#: pcbnew/dialogs/dialog_create_array_base.cpp:74
#: pcbnew/dialogs/dialog_create_array_base.cpp:85
#: pcbnew/dialogs/dialog_create_array_base.cpp:220
#: pcbnew/dialogs/dialog_create_array_base.cpp:231
#: pcbnew/dialogs/dialog_create_array_base.cpp:242
#: pcbnew/dialogs/dialog_create_array_base.cpp:254
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/dialog_export_idf_base.cpp:64
#: pcbnew/dialogs/dialog_export_idf_base.cpp:85
#: pcbnew/dialogs/dialog_export_step_base.cpp:75
#: pcbnew/dialogs/dialog_export_step_base.cpp:90
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:77
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:92
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:141
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:142
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:250
#: pcbnew/dialogs/dialog_gendrill_base.cpp:155
#: pcbnew/dialogs/dialog_gendrill_base.cpp:163
#: pcbnew/dialogs/dialog_gendrill_base.cpp:171
#: pcbnew/dialogs/dialog_gendrill_base.cpp:179
#: pcbnew/dialogs/dialog_gendrill_base.cpp:187
#: pcbnew/dialogs/dialog_move_exact_base.cpp:28
#: pcbnew/dialogs/dialog_move_exact_base.cpp:42
#: pcbnew/dialogs/dialog_move_exact_base.cpp:56
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:324
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:325
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1502
#: pcbnew/dialogs/dialog_position_relative_base.cpp:71
#: pcbnew/dialogs/dialog_position_relative_base.cpp:88
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:131
msgid "0"
msgstr "0"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:37
msgid "Pin count:"
msgstr "Antal stift:"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:48
msgid "Duplicate pins:"
msgstr "Duplicera stift:"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:137
msgid "Group by name"
msgstr "Gruppera efter namn"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:140
msgid "Group Selected"
msgstr "Grupp vald"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:151
msgid "Filter by unit:"
msgstr "Filtrera efter enhet:"
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.h:82
msgid "Pin Table"
msgstr "Stifttabell"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:33
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:128
msgid "Symbol name:"
msgstr "Symbolnamn:"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:35
msgid ""
"The symbol name in library and also the default\n"
"symbol value when loaded in the schematic."
msgstr ""
"Detta är symbolnamnet i biblioteket,\n"
"och även standardkomponentvärdet när det laddas i schemat."
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:42
msgid "Derive from existing symbol:"
msgstr "Hämta från befintlig symbol:"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:46
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:84
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:251
#: eeschema/dialogs/dialog_line_properties_base.cpp:66
#: eeschema/dialogs/dialog_shape_properties_base.cpp:83
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:66
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:176
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:207
msgid "Combo!"
msgstr "Kombination!"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:47
msgid ""
"Select symbol in the current library as parent symbol.\n"
"\n"
"This was previously known as an alias. Do not select\n"
"an existing symbol to create a new root symbol."
msgstr ""
"Välj symbol i det aktuella biblioteket som överordnad symbol.\n"
"\n"
"Detta var tidigare känt som ett alias. Välj inte\n"
"en befintlig symbol för att skapa en ny rotsymbol."
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:51
msgid "Default reference designator:"
msgstr "Standardreferensbeteckning:"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:55
msgid "U"
msgstr "U"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:58
msgid "Number of units per package:"
msgstr "Antal enheter per paket:"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:71
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:188
msgid "All units are interchangeable"
msgstr "Alla enheter är utbytbara"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:72
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:189
msgid ""
"Check this option when all symbol units are identical except\n"
"for pin numbers."
msgstr ""
"Markera detta alternativ när alla symbolenheter är identiska förutom\n"
"gällande stiftnummer."
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:76
msgid "Create symbol with alternate body style (De Morgan)"
msgstr "Skapa symbol med alternativ kroppsstil (De Morgan)"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:79
msgid "Create symbol as power symbol"
msgstr "Skapa symbol som kraftsymbol"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:82
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:282
msgid "Exclude from schematic bill of materials"
msgstr "Uteslut från kretsschemats materialförteckning"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:85
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:285
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:211
msgid "Exclude from board"
msgstr "Uteslut från mönsterkort"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:103
msgid "Pin name position offset:"
msgstr "Förskjutning av pin-namn position:"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:120
msgid "Show pin number text"
msgstr "Visa textnummer"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:124
msgid "Show pin name text"
msgstr "Visa text för pin-namn"
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:128
msgid "Pin name inside"
msgstr "Fäst namn inuti"
#: eeschema/dialogs/dialog_lib_new_symbol_base.h:74
msgid "New Symbol"
msgstr "Ny symbol"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:40
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:207
#: eeschema/dialogs/dialog_shape_properties_base.cpp:39
#: eeschema/dialogs/dialog_text_properties_base.cpp:213
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:150
msgid "Border"
msgstr "Ram"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:80
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:247
#: eeschema/dialogs/dialog_line_properties_base.cpp:62
#: eeschema/dialogs/dialog_shape_properties_base.cpp:79
#: eeschema/dialogs/dialog_text_properties_base.cpp:253
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:62
msgid "Style:"
msgstr "Stil:"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:89
msgid "Set border width to 0 to use schematic's default symbol line width."
msgstr ""
"Sätt kantlinjebredden till 0 för att använda kretsschemats förinställda "
"linjebredd för symboler."
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:103
#: pcbnew/zone.cpp:1435
msgid "Fill Style"
msgstr "Fyll stil"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:110
msgid "Do not fill"
msgstr "Fyll inte"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:113
msgid "Fill with body outline color"
msgstr "Fyll med kroppens kontureringsfärg"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:116
msgid "Fill with body background color"
msgstr "Fyll med kroppsbakgrundsfärg"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:119
msgid "Fill with:"
msgstr "Fyllning:"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:140
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:195
msgid "Private to Symbol Editor"
msgstr "Privat för Symbolredigeraren"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:143
#: eeschema/dialogs/dialog_pin_properties_base.cpp:154
msgid "Common to all &units in symbol"
msgstr "Gemensamt för alla & enheter i symbol"
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:149
#: eeschema/dialogs/dialog_pin_properties_base.cpp:157
msgid "Common to all body &styles (De Morgan)"
msgstr "Gemensamt för alla symbolvarianter (De Morgan)"
#: eeschema/dialogs/dialog_lib_shape_properties_base.h:88
msgid "Drawing Properties"
msgstr "Ritningsegenskaper"
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:284
#: eeschema/dialogs/dialog_symbol_properties.cpp:667
msgid "References must start with a letter."
msgstr "Referenser måste börja med en bokstav."
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:304
#: eeschema/dialogs/dialog_sheet_properties.cpp:217
#: eeschema/dialogs/dialog_symbol_properties.cpp:684
msgid "Fields must have a name."
msgstr "Fält måste ha ett namn."
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:321
msgid "Derived symbol must have a parent selected"
msgstr "Härledd symbolen måste ha en vald överordnad symbol"
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:333
msgid "Delete extra units from symbol?"
msgstr "Radera extra enheter från symbolen?"
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:339
msgid "Delete alternate body style (De Morgan) from symbol?"
msgstr "Radera alternativ kroppsstil (De Morgan) från symbol?"
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:366
#: eeschema/tools/symbol_editor_control.cpp:345
#, c-format
msgid "Symbol name '%s' already in use in library '%s'."
msgstr "Symbolnamn '%s' används redan i bibliotek '%s'."
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:488
#, c-format
msgid "The name '%s' is already in use."
msgstr "Namnet '%s' används redan."
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:571
#: eeschema/dialogs/dialog_sheet_properties.cpp:745
#: eeschema/dialogs/dialog_symbol_properties.cpp:976
#, c-format
msgid "The first %d fields are mandatory."
msgstr "De första %d fälten är obligatoriska."
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:748
msgid "Add Footprint Filter"
msgstr "Lägg till Footprint Filter"
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:791
msgid "Edit Footprint Filter"
msgstr "Redigera filter för fotavtryck"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:136
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:115
msgid "Description:"
msgstr "Beskrivning:"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:143
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:122
msgid "Keywords:"
msgstr "Nyckelord:"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:150
msgid "Derive from symbol:"
msgstr "Hämta från symbol:"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:154
msgid "<None>"
msgstr "<None>"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:155
msgid ""
"Select symbol to derive this symbol from or select\n"
"<None> for root symbol.\n"
"\n"
"Derived symbols were formerly referred to as aliases.\n"
"This is no longer the case and all symbols are either\n"
"derived from another symbols or they stand alone as\n"
"root symbols."
msgstr ""
"Välj symbol för att härleda denna symbol från eller välj\n"
"<Ingen> för rotsymbol.\n"
"\n"
"Avledda symboler kallades tidigare alias.\n"
"Detta är inte längre fallet och alla symboler är det heller\n"
"härledda från andra symboler eller de står ensamma som\n"
"rot symboler."
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:176
msgid "Number of Units:"
msgstr "Antal enheter:"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:178
msgid "Enter the number of units for a symbol that contains more than one unit"
msgstr "Ange antalet enheter för en symbol som innehåller mer än en enhet"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:196
msgid "Has alternate body style (De Morgan)"
msgstr "Har alternativ symbol (De Morgan)"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:197
msgid "Check this option if the symbol has an alternate body style (De Morgan)"
msgstr ""
"Markera det här alternativet om symbolen har en alternativ kroppsstil (De "
"Morgan)"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:204
msgid "Define as power symbol"
msgstr "Definiera som kraftsymbol"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:205
msgid ""
"Setting this option makes the symbol in question appear in the\n"
"\"add power symbol\" dialog. It will lock the value text to protect it\n"
"from editing in the schematic. The symbol will not be included in\n"
"the BOM and cannot be assigned a footprint."
msgstr ""
"Om du ställer in detta alternativ visas symbolen i fråga i dialogrutan \n"
"\"lägg till strömförsörjningssybol\". Det låser värdetexten för att skydda "
"den\n"
"från redigering i kretsschemaredigeraren. Symbolen ingår inte i\n"
"komponentlistan och kan inte tilldelas ett fotavtryck."
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:219
msgid "Pin Text Options"
msgstr "Fäst textalternativ"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:221
msgid "Show pin number"
msgstr "Visa stiftnummer"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:223
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:177
msgid "Show or hide pin numbers"
msgstr "Visa eller dölj stiftnummer"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:227
msgid "Show pin name"
msgstr "Visa stiftnamn"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:229
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:183
msgid "Show or hide pin names"
msgstr "Visa eller dölj stiftnamn"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:236
msgid "Place pin names inside"
msgstr "Placera stiftnamn inuti"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:238
msgid ""
"Check this option to have pin names inside the body and pin number outside.\n"
"If not checked pins names and pins numbers are outside."
msgstr ""
"Markera det här alternativet för att ha stiftnamn inuti symbolkroppen och "
"stiftnummer utanför.\n"
"Om inte markerat är både stiftnamn och stiftnummer är utanför."
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:245
msgid "Position offset:"
msgstr "Positionsförskjutning:"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:247
msgid "Margin between the pin name position and the symbol body."
msgstr "Marginal mellan pin-namnets position och symbolkroppen."
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:254
#: eeschema/dialogs/dialog_pin_properties_base.cpp:120
#: eeschema/dialogs/dialog_pin_properties_base.cpp:124
#: eeschema/dialogs/dialog_pin_properties_base.cpp:128
#: eeschema/dialogs/dialog_pin_properties_base.cpp:132
#: eeschema/dialogs/dialog_pin_properties_base.cpp:136
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:137
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:72
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:83
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:104
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:156
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:167
#: pcbnew/microwave/microwave_polygon.cpp:147
#: pcbnew/microwave/microwave_polygon.cpp:156
msgid "units"
msgstr "enheter"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:274
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:197
msgid "Attributes"
msgstr "Attributer"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:276
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:199
msgid "Exclude from simulation"
msgstr "Exkludera från simulering"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:309
msgid "Footprint filters:"
msgstr "Fotavtrycksfilter:"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:311
msgid ""
"A list of footprints names that can be used for this symbol.\n"
"Footprints names can used wildcards like sm* to allow all footprints names "
"starting by sm."
msgstr ""
"En lista av fotavtrycksnamn som kan användas för denna symbol.\n"
"Jokertecken kan användas, som t.ex. sm* för att tillåta alla fotavtrycksnamn "
"som börjar med sm."
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:322
msgid "Add footprint filter"
msgstr "Lägg till Footprint Filter"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:327
msgid "Edit footprint filter"
msgstr "Redigera filter för fotavtryck"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:335
msgid "Delete footprint filter"
msgstr "Ta bort filter för fotavtryck"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:349
msgid "Footprint Filters"
msgstr "Fotavtrycksfilter"
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:362
msgid "Edit Simulation Model..."
msgstr "Redigera simulationsmodell..."
#: eeschema/dialogs/dialog_lib_symbol_properties_base.h:118
msgid "Library Symbol Properties"
msgstr "Biblioteksegenskaper"
#: eeschema/dialogs/dialog_lib_text_properties.cpp:217
#: eeschema/dialogs/dialog_text_properties.cpp:487
msgid "Text can not be empty."
msgstr "Text kan inte utelämnas."
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:259
#: eeschema/dialogs/dialog_text_properties_base.cpp:262
msgid "Background fill"
msgstr "Bakgrundsfyllning"
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:285
msgid "Private to symbol editor"
msgstr "Privat för symbolredigeraren"
#: eeschema/dialogs/dialog_lib_textbox_properties_base.h:108
#: eeschema/dialogs/dialog_text_properties.cpp:60
#: pcbnew/dialogs/dialog_textbox_properties_base.h:103
msgid "Text Box Properties"
msgstr "Egenskaper för textruta"
#: eeschema/dialogs/dialog_line_properties_base.cpp:79
msgid "Set width to 0 to use schematic's default line width."
msgstr ""
"Sätt bredden till 0 för att använda kretsschemats förinställda linjebredd."
#: eeschema/dialogs/dialog_line_properties_base.h:68
msgid "Line Properties"
msgstr "Linjeegenskaper"
#: eeschema/dialogs/dialog_migrate_buses.cpp:104
msgid "Conflicting Labels"
msgstr "Motstridiga etiketter"
#: eeschema/dialogs/dialog_migrate_buses.cpp:105
msgid "New Label"
msgstr "Ny etikett"
#: eeschema/dialogs/dialog_migrate_buses.cpp:106
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:94
#: pcbnew/dialogs/dialog_find_base.cpp:118 pcbnew/fp_text.cpp:297
#: pcbnew/fp_textbox.cpp:309 pcbnew/pad.cpp:970 pcbnew/pcb_dimension.cpp:363
#: pcbnew/pcb_group.cpp:403 pcbnew/pcb_shape.cpp:307 pcbnew/pcb_text.cpp:134
#: pcbnew/pcb_textbox.cpp:303 pcbnew/pcb_track.cpp:953 pcbnew/zone.cpp:569
msgid "Status"
msgstr "Status"
#: eeschema/dialogs/dialog_migrate_buses.cpp:214
msgid "Updated"
msgstr "Uppdaterad"
#: eeschema/dialogs/dialog_migrate_buses_base.cpp:19
msgid ""
"This schematic has one or more buses with more than one label.\n"
"This was allowed in previous KiCad versions but is no longer permitted."
msgstr ""
"Denna schemat har en eller flera bussar med mer än en etikett.\n"
"Detta var tillåtet i tidigare KiCad-versioner men är inte längre tillåtet."
#: eeschema/dialogs/dialog_migrate_buses_base.cpp:23
msgid ""
"Please select a new name for each of the buses below.\n"
"A name has been suggested for you based on the labels attached to the bus."
msgstr ""
"Välj ett nytt namn för var och en av bussarna nedan.\n"
"Ett namn har föreslagits för dig baserat på etiketterna som är fästa vid "
"bussen."
#: eeschema/dialogs/dialog_migrate_buses_base.cpp:32
msgid "Proposed new name:"
msgstr "Föreslaget nytt namn:"
#: eeschema/dialogs/dialog_migrate_buses_base.cpp:45
msgid "Accept Name"
msgstr "Acceptera namn"
#: eeschema/dialogs/dialog_migrate_buses_base.h:53
msgid "Migrate Buses"
msgstr "Migrera bussar"
#: eeschema/dialogs/dialog_pin_properties.cpp:53
#: eeschema/dialogs/dialog_pin_properties_base.cpp:212
msgid "Alternate Pin Name"
msgstr "Alternativt pin-namn"
#: eeschema/dialogs/dialog_pin_properties.cpp:203
#: eeschema/dialogs/dialog_symbol_properties.cpp:346
msgid "Alternate pin assignments are not available for De Morgan symbols."
msgstr ""
"Alternativa stifttilldelningar är inte tillgängliga för De Morgan-symboler."
#: eeschema/dialogs/dialog_pin_properties.cpp:280
msgid "Exit sync pins mode"
msgstr "Gå ur läge för synkroniserade stift"
#: eeschema/dialogs/dialog_pin_properties.cpp:295
msgid ""
"Synchronized pins mode is enabled.\n"
"Similar pins will be edited regardless of this option."
msgstr ""
"Redigeringsläge för synkroniserade stift är aktiverat.\n"
"Lika stift kommer modifieras utan hänsyn till denna inställning."
#: eeschema/dialogs/dialog_pin_properties.cpp:300
msgid "If checked, this pin will exist in all units."
msgstr "Om vald kommer denna pin finnas i alla enheter."
#: eeschema/dialogs/dialog_pin_properties.cpp:304
msgid "This symbol only has one unit. This control has no effect."
msgstr "Denna symbol har endast en enhet. Denna kontroll har ingen verkan."
#: eeschema/dialogs/dialog_pin_properties.cpp:325
msgid "Alternate pin definitions must have a name."
msgstr "Alternativa stiftdefinitioner måste ha ett namn."
#: eeschema/dialogs/dialog_pin_properties.cpp:345
#, c-format
msgid ""
"This pin is not on a %d mils grid which will make it difficult to connect to "
"in the schematic.\n"
"Do you wish to continue?"
msgstr ""
"Detta stift är inte placerat på ett %d mils rutnät, vilket kommer att göra "
"det svårt att ansluta till i schemat.\n"
"Vill du fortsätta?"
#: eeschema/dialogs/dialog_pin_properties.cpp:439
msgid "Synchronized Pins Mode."
msgstr "Redigeringsläge för synkroniserade stift."
#: eeschema/dialogs/dialog_pin_properties.cpp:441
msgid "Synchronized Pins Mode. New pin will be added to all units."
msgstr "Läge för synkroniserade stift. Nya stift läggs till i alla enheter."
#: eeschema/dialogs/dialog_pin_properties.cpp:443
msgid "Synchronized Pins Mode. Matching pins in other units will be updated."
msgstr ""
"Läge för synkroniserade stift. Matchande stift i andra enheter kommer att "
"uppdateras."
#: eeschema/dialogs/dialog_pin_properties_base.cpp:44
msgid "Pin &name:"
msgstr "Pin & namn:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:51
msgid "Pin num&ber:"
msgstr "Pin-nummer:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:53
msgid "Pin number: 1 to 4 ASCII letters and/or digits"
msgstr "Stiftnummer: 1 till 4 ASCII-bokstäver och / eller siffror"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:60
msgid "&X position:"
msgstr "& X-position:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:69
msgid "&Y position:"
msgstr "& Y-position:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:76
msgid "&Pin length:"
msgstr "&Stiftlängd:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:83
msgid "N&ame text size:"
msgstr "N & ame textstorlek:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:90
msgid "Number text si&ze:"
msgstr "Nummertext si & ze:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:97
msgid "Electrical type:"
msgstr "Elektrisk typ:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:99
msgid "Used by the ERC."
msgstr "Används av ERC."
#: eeschema/dialogs/dialog_pin_properties_base.cpp:106
msgid "Graphic style:"
msgstr "Grafisk stil:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:163
msgid "&Visible"
msgstr "&Synlig"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:170
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:192
msgid "Preview:"
msgstr "Förhandsvisning:"
#: eeschema/dialogs/dialog_pin_properties_base.cpp:188
msgid "Alternate pin definitions"
msgstr "Alternativa stiftdefinitioner"
#: eeschema/dialogs/dialog_pin_properties_base.h:105
msgid "Pin Properties"
msgstr "Fästegenskaper"
#: eeschema/dialogs/dialog_plot_schematic.cpp:74
msgid "Plot All Pages"
msgstr "Plotta alla sidor"
#: eeschema/dialogs/dialog_plot_schematic.cpp:75
msgid "Plot Current Page"
msgstr "Plotta aktuell sida"
#: eeschema/dialogs/dialog_plot_schematic.cpp:178
#: pcbnew/dialogs/dialog_export_svg.cpp:203
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:200
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:552
#: pcbnew/dialogs/dialog_gendrill.cpp:301 pcbnew/dialogs/dialog_plot.cpp:515
msgid "Select Output Directory"
msgstr "Välj katalog för utdata"
#: eeschema/dialogs/dialog_plot_schematic.cpp:195
#: pcbnew/dialogs/dialog_gendrill.cpp:310 pcbnew/dialogs/dialog_plot.cpp:532
#, c-format
msgid ""
"Do you want to use a path relative to\n"
"'%s'?"
msgstr ""
"Vill du använda en sökväg i relativ till\n"
"'%s'?"
#: eeschema/dialogs/dialog_plot_schematic.cpp:197
#: pcbnew/dialogs/dialog_export_svg.cpp:210
#: pcbnew/dialogs/dialog_export_svg.cpp:222
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:207
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:217
#: pcbnew/dialogs/dialog_gendrill.cpp:312
#: pcbnew/dialogs/dialog_gendrill.cpp:321 pcbnew/dialogs/dialog_plot.cpp:534
msgid "Plot Output Directory"
msgstr "Utmatningskatalog för plottfiler"
#: eeschema/dialogs/dialog_plot_schematic.cpp:240
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:60
msgid "Schematic size"
msgstr "Kretsschemats storlek"
#: eeschema/dialogs/dialog_plot_schematic.cpp:246
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:76
msgid "A5"
msgstr "A5"
#: eeschema/dialogs/dialog_plot_schematic.cpp:247
#: eeschema/dialogs/dialog_plot_schematic.cpp:262
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:60
msgid "A4"
msgstr "A4"
#: eeschema/dialogs/dialog_plot_schematic.cpp:248
msgid "A3"
msgstr "A3"
#: eeschema/dialogs/dialog_plot_schematic.cpp:249
msgid "A2"
msgstr "A2"
#: eeschema/dialogs/dialog_plot_schematic.cpp:250
msgid "A1"
msgstr "A1"
#: eeschema/dialogs/dialog_plot_schematic.cpp:251
msgid "A0"
msgstr "A0"
#: eeschema/dialogs/dialog_plot_schematic.cpp:252
#: eeschema/dialogs/dialog_plot_schematic.cpp:263
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:60
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:145
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:186
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:99
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:38
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:120
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:286
msgid "A"
msgstr "A"
#: eeschema/dialogs/dialog_plot_schematic.cpp:253
msgid "B"
msgstr "B"
#: eeschema/dialogs/dialog_plot_schematic.cpp:254
msgid "C"
msgstr "C"
#: eeschema/dialogs/dialog_plot_schematic.cpp:255
msgid "D"
msgstr "D"
#: eeschema/dialogs/dialog_plot_schematic.cpp:256
msgid "E"
msgstr "E"
#: eeschema/dialogs/dialog_plot_schematic.cpp:411
#, c-format
msgid "Falling back to user path '%s'."
msgstr "Faller tillbaka på användardefinierad sökväg '%s'."
#: eeschema/dialogs/dialog_plot_schematic.cpp:439
#: eeschema/dialogs/dialog_plot_schematic.cpp:477
#, c-format
msgid "Cannot normalize path '%s%s'."
msgstr "Kunde inte normalisera sökväg '%s%s'."
#: eeschema/dialogs/dialog_plot_schematic.cpp:464
msgid "No project or path defined for the current schematic."
msgstr "Inget projekt eller sökväg definierad för det aktuella schemat."
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:25
#: pcbnew/dialogs/dialog_export_svg_base.cpp:25
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:27
#: pcbnew/dialogs/dialog_plot_base.cpp:37
msgid "Output directory:"
msgstr "Katalog för utdata:"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:30
msgid ""
"Target directory for plot files. Can be absolute or relative to the "
"schematic main file location."
msgstr ""
"Målkatalog för plotfiler. Kan vara absolut eller relativt platsen för "
"kretsschemats huvudfil."
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "Postscript"
msgstr "Postscript"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "PDF"
msgstr "PDF"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "SVG"
msgstr "SVG"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "DXF"
msgstr "DXF"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "HPGL"
msgstr "HPGL"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:56
msgid "Page size:"
msgstr "Sidstorlek:"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:66
msgid "Plot drawing sheet"
msgstr "Plotta ritningsarket"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:68
msgid "Plot the drawing sheet border and title block"
msgstr "Plotta ritningsarkets ram och namnruta"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:77
msgid "Black and White"
msgstr "Svartvitt"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:83
msgid "Plot background color"
msgstr "Plotta bakgrundsfärg"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:84
msgid "Plot the background color if the output format supports it"
msgstr "Plotta bakgrundsfärgen om utdataformatet stöder den"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:88
msgid "Color theme:"
msgstr "Färgtema:"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:95
msgid "Select the color theme to use for plotting"
msgstr "Välj det färgtema som ska användas för plottning"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:99
#: eeschema/dialogs/panel_setup_formatting_base.cpp:111
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:183
msgid "Default line width:"
msgstr "Standardradbredd:"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:104
msgid ""
"Selection of the default pen thickness used to draw items, when their "
"thickness is set to 0."
msgstr ""
"Val av standardtjocklek för pennor som används för att rita objekt när deras "
"tjocklek är inställd på 0."
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:123
#: pcbnew/dialogs/dialog_plot_base.cpp:246
msgid "HPGL Options"
msgstr "HPGL-alternativ"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:130
msgid "Position and units:"
msgstr "Position och enhet:"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:134
msgid "Bottom left, plotter units"
msgstr "Nedre vänster, plotter-enheter"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:134
msgid "Centered, plotter units"
msgstr "Centrerad, plotter-enheter"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:134
msgid "Page fit, user units"
msgstr "Sidpassning, användarenheter"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:134
msgid "Content fit, user units"
msgstr "Innehållspassning, användarenheter"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:140
msgid "Pen width:"
msgstr "Pennans bredd:"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:159
msgid "Other options"
msgstr "Övriga alternativ"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:161
msgid "Open file after plot"
msgstr "Öppna fil efter plottning"
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:163
msgid "Open output file with associated application after successful plot"
msgstr "Öppna skapad fil med associerad applikation efter lyckad plottning"
#: eeschema/dialogs/dialog_plot_schematic_base.h:89
msgid "Plot Schematic Options"
msgstr "Alternativ för plottning av kretsschema"
#: eeschema/dialogs/dialog_print_using_printer.cpp:333
msgid "Print Schematic"
msgstr "Skriv ut kretsschema"
#: eeschema/dialogs/dialog_print_using_printer.cpp:340
msgid "An error occurred attempting to print the schematic."
msgstr "Ett fel inträffade vid försök att skriva ut kretsschemat."
#: eeschema/dialogs/dialog_print_using_printer.cpp:365
#, c-format
msgid "Print page %d"
msgstr "Skriv ut sida %d"
#: eeschema/dialogs/dialog_print_using_printer_base.cpp:22
msgid "Print sheet &reference and title block"
msgstr "Skriv ut arkets &referensram och namnruta"
#: eeschema/dialogs/dialog_print_using_printer_base.cpp:24
msgid "Print (or not) the Frame references."
msgstr "Skriv ut (eller inte) ramreferenserna."
#: eeschema/dialogs/dialog_print_using_printer_base.cpp:28
msgid "Print in &black and white only"
msgstr "Skriv ut endast i &svartvitt"
#: eeschema/dialogs/dialog_print_using_printer_base.cpp:32
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:209
msgid "Print background color"
msgstr "Skriv ut bakgrundsfärg"
#: eeschema/dialogs/dialog_print_using_printer_base.cpp:35
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:214
msgid "Use a different color theme for printing:"
msgstr "Använd ett annat färgtema för utskrift:"
#: eeschema/dialogs/dialog_rescue_each.cpp:101
msgid ""
"This schematic was made using older symbol libraries which may break the "
"schematic. Some symbols may need to be linked to a different symbol name. "
"Some symbols may need to be \"rescued\" (copied and renamed) into a new "
"library.\n"
"\n"
"The following changes are recommended to update the project."
msgstr ""
"Detta kretsschema skapades med ett äldre symbolbibliotek som kan bryta "
"kretsschemat. Vissa symboler kan behöva kopplas till ett annat symbolnamn. "
"Vissa symboler kan behöva \"räddas\" (kopieras och byta namn) till ett nytt "
"bibliotek.\n"
"\n"
"Följande ändringar rekommenderas för att uppdatera projektet."
#: eeschema/dialogs/dialog_rescue_each.cpp:108
msgid "Accept"
msgstr "Acceptera"
#: eeschema/dialogs/dialog_rescue_each.cpp:122
msgid "Symbol Name"
msgstr "Symbolnamn"
#: eeschema/dialogs/dialog_rescue_each.cpp:126
msgid "Action Taken"
msgstr "Åtgärder som vidtagits"
#: eeschema/dialogs/dialog_rescue_each.cpp:130
#: eeschema/dialogs/dialog_sim_model_base.cpp:252
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1040
#: eeschema/sch_symbol.cpp:1597 eeschema/sch_symbol.cpp:1641
#: pcbnew/footprint.cpp:2871 pcbnew/fp_text.cpp:279
msgid "Reference"
msgstr "Referens"
#: eeschema/dialogs/dialog_rescue_each.cpp:150
#: eeschema/dialogs/dialog_rescue_each.cpp:300
msgid "Rescue Symbols"
msgstr "Rädda symboler"
#: eeschema/dialogs/dialog_rescue_each.cpp:151
msgid "Skip Symbol Rescue"
msgstr "Hoppa över att rädda symboler"
#: eeschema/dialogs/dialog_rescue_each.cpp:233
#, c-format
msgid "Instances of this symbol (%d items):"
msgstr "Exempel på denna symbol (%d artiklar):"
#: eeschema/dialogs/dialog_rescue_each.cpp:296
msgid ""
"Stop showing this tool?\n"
"No changes will be made.\n"
"\n"
"This setting can be changed from the \"Symbol Libraries\" dialog,\n"
"and the tool can be activated manually from the \"Tools\" menu."
msgstr ""
"Sluta visa det här verktyget?\n"
"Inga ändringar kommer att göras.\n"
"\n"
"Denna inställning kan ändras från dialogrutan \"Symbolbibliotek\",\n"
"och verktyget kan aktiveras manuellt från menyn \"Verktyg\"."
#: eeschema/dialogs/dialog_rescue_each_base.cpp:28
msgid "Symbols to update:"
msgstr "Symboler som ska uppdateras:"
#: eeschema/dialogs/dialog_rescue_each_base.cpp:37
msgid "Instances of this symbol:"
msgstr "Exempel på denna symbol:"
#: eeschema/dialogs/dialog_rescue_each_base.cpp:55
msgid "Cached Symbol:"
msgstr "Cachad symbol:"
#: eeschema/dialogs/dialog_rescue_each_base.cpp:78
msgid "Library Symbol:"
msgstr "Bibliotekssymbol:"
#: eeschema/dialogs/dialog_rescue_each_base.cpp:104
msgid "Never Show Again"
msgstr "Visa aldrig igen"
#: eeschema/dialogs/dialog_rescue_each_base.h:67
#: eeschema/project_rescue.cpp:589 eeschema/project_rescue.cpp:604
msgid "Project Rescue Helper"
msgstr "Projekträddningsassistent"
#: eeschema/dialogs/dialog_sch_import_settings.cpp:44
#: eeschema/dialogs/dialog_sch_import_settings_base.h:63
#: pcbnew/dialogs/dialog_import_settings.cpp:53
#: pcbnew/dialogs/dialog_import_settings_base.h:69
msgid "Import Settings"
msgstr "Importinställningar"
#: eeschema/dialogs/dialog_sch_import_settings.cpp:60
#: pcbnew/dialogs/dialog_import_settings.cpp:114
msgid "Import Settings From"
msgstr "Importera inställningar från"
#: eeschema/dialogs/dialog_sch_import_settings.cpp:72
#: pcbnew/dialogs/dialog_import_settings.cpp:126
msgid "File not found."
msgstr "Filen hittades inte."
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:24
#: pcbnew/dialogs/dialog_import_settings_base.cpp:24
msgid "Import from:"
msgstr "Importera från:"
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:29
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:32
#: pcbnew/dialogs/dialog_import_settings_base.cpp:29
#: pcbnew/dialogs/dialog_plot_base.cpp:42
msgid ""
"Target directory for plot files. Can be absolute or relative to the board "
"file location."
msgstr ""
"Målkatalog för plotfiler. Kan vara absolut eller relativt till "
"mönsterkortsfilens sökväg."
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:44
#: pcbnew/dialogs/dialog_import_settings_base.cpp:47
msgid "Import:"
msgstr "Importera:"
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:48
msgid "Formatting preferences"
msgstr "Formateringsinställningar"
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:51
msgid "Field name templates"
msgstr "Fältnamnsmallar"
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:54
msgid "Pin conflict map"
msgstr "Stiftkonfliktskarta"
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:57
#: pcbnew/dialogs/dialog_import_settings_base.cpp:72
msgid "Violation severities"
msgstr "Överträdelsens allvarlighetsgrad"
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:60
#: pcbnew/dialogs/dialog_import_settings_base.cpp:69
msgid "Net classes"
msgstr "Nätklasser"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:31
msgid "&Search for:"
msgstr "&Söka efter:"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:36
#: pcbnew/dialogs/dialog_find_base.cpp:33
msgid "Text with optional wildcards"
msgstr "Text med valfria jokertecken"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:41
msgid "Replace &with:"
msgstr "Ersätt med:"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:52
msgid "Direction:"
msgstr "Vägvisning:"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:61
msgid "F&orward"
msgstr "Fram"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:66
msgid "&Backward"
msgstr "&Bakåt"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:82
msgid "&Match case"
msgstr "Skilj p? versaler/gemena"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:85
#: pcbnew/dialogs/dialog_find_base.cpp:46
msgid "Words"
msgstr "Ord"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:89
#: pcbnew/dialogs/dialog_find_base.cpp:49
msgid "Wildcards"
msgstr "Jokertecken"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:92
msgid "Search pin &names and numbers"
msgstr "Sök efter pin & namn och nummer"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:95
msgid "Search hidden fields"
msgstr "Sök dolda fält"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:98
msgid "Search the current &sheet only"
msgstr "Sök bara i det aktuella & arket"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:101
msgid "Replace matches in reference designators"
msgstr "Ersätt matchningar i referensbeteckningar"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:115
msgid "&Find"
msgstr "&Sök"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:120
msgid "&Replace"
msgstr "&Ersätt"
#: eeschema/dialogs/dialog_schematic_find_base.cpp:125
msgid "Replace &All"
msgstr "Ersätt Alla"
#: eeschema/dialogs/dialog_schematic_setup.cpp:41
msgid "Schematic Setup"
msgstr "Kretsschema-inställningar"
#: eeschema/dialogs/dialog_schematic_setup.cpp:42
msgid "Import Settings from Another Project..."
msgstr "Importera inställningar från ett annat projekt ..."
#: eeschema/dialogs/dialog_schematic_setup.cpp:79
msgid "Electrical Rules"
msgstr "Elektriska regler"
#: eeschema/dialogs/dialog_schematic_setup.cpp:83
#: eeschema/sch_base_frame.cpp:276
#: pcbnew/dialogs/dialog_board_statistics.cpp:663
#: pcbnew/footprint_libraries_utils.cpp:524
msgid "Project"
msgstr "Projekt"
#: eeschema/dialogs/dialog_schematic_setup.cpp:84
#: pcbnew/dialogs/dialog_board_setup.cpp:112
#: pcbnew/widgets/appearance_controls.cpp:512
#: pcbnew/widgets/appearance_controls.cpp:2319
#: pcbnew/widgets/appearance_controls_base.cpp:118
msgid "Net Classes"
msgstr "Nätklasser"
#: eeschema/dialogs/dialog_schematic_setup.cpp:85
msgid "Bus Alias Definitions"
msgstr "Bussaliasdefinitioner"
#: eeschema/dialogs/dialog_schematic_setup.cpp:86
#: pcbnew/dialogs/dialog_board_setup.cpp:107
msgid "Text Variables"
msgstr "Textvariabler"
#: eeschema/dialogs/dialog_schematic_setup.cpp:97
msgid "Project is missing or read-only. Settings will not be editable."
msgstr ""
"Projektet saknas eller är skrivskyddat. Inställningar kommer inte kunna "
"ändras."
#: eeschema/dialogs/dialog_schematic_setup.cpp:134
#, c-format
msgid ""
"Error importing settings from project:\n"
"Project file %s could not be loaded."
msgstr ""
"Fel vid import av inställningar från projekt:\n"
"Projektfilen %s kunde inte laddas."
#: eeschema/dialogs/dialog_shape_properties.cpp:58
#: eeschema/dialogs/dialog_sheet_properties.cpp:78
#: eeschema/dialogs/dialog_text_properties.cpp:74
msgid "Note: individual item colors overridden in Preferences."
msgstr "Obs! Individuella objektfärger åsidosätts i inställningar."
#: eeschema/dialogs/dialog_shape_properties_base.cpp:88
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:158
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1274
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1509
msgid "Filled shape"
msgstr "Fylld form"
#: eeschema/dialogs/dialog_shape_properties_base.cpp:122
msgid "Set border width to 0 to use schematic's default line width."
msgstr ""
"Sätt kantlinjebredden till 0 för att använda kretsschemats förinställda "
"linjebredd."
#: eeschema/dialogs/dialog_shape_properties_base.cpp:126
msgid "Clear colors to use Schematic Editor colors."
msgstr "Välj transparent för att använda kretsschemaredigerarens färger."
#: eeschema/dialogs/dialog_shape_properties_base.h:79
#, c-format
msgid "%s Properties"
msgstr "%s-egenskaper"
#: eeschema/dialogs/dialog_sheet_pin_properties_base.h:86
msgid "Sheet Pin Properties"
msgstr "Egenskaper för arksnålar"
#: eeschema/dialogs/dialog_sheet_properties.cpp:272
msgid "A sheet must have a valid file name."
msgstr "Ett ark måste ha ett giltigt filnamn."
#: eeschema/dialogs/dialog_sheet_properties.cpp:282
msgid "Sheet file must have a '.kicad_sch' extension."
msgstr "Arkfilen måste ha ett \".kicad_sch\" -tillägg."
#: eeschema/dialogs/dialog_sheet_properties.cpp:316
msgid "Use relative path for sheet file?"
msgstr "Använd relativ sökväg för bladfil?"
#: eeschema/dialogs/dialog_sheet_properties.cpp:317
msgid "Sheet File Path"
msgstr "Bladfilssökväg"
#: eeschema/dialogs/dialog_sheet_properties.cpp:320
msgid ""
"Using relative hierarchical sheet file name paths improves schematic "
"portability across systems and platforms. Using absolute paths can result "
"in portability issues."
msgstr ""
"Användandet av relativa sökvägar för hierarkiska ark förbättrar portabilitet "
"över olika system och plattformar. Användandet av absoluta sökvägar kan "
"orsaka portabilitetsproblem."
#: eeschema/dialogs/dialog_sheet_properties.cpp:324
msgid "Use Relative Path"
msgstr "Använd relativ sökväg"
#: eeschema/dialogs/dialog_sheet_properties.cpp:325
msgid "Use Absolute Path"
msgstr "Använd absolut sökväg"
#: eeschema/dialogs/dialog_sheet_properties.cpp:356
msgid "Untitled Sheet"
msgstr "Namnlöst blad"
#: eeschema/dialogs/dialog_sheet_properties.cpp:382
msgid "Note: item colors are overridden in the current color theme."
msgstr "Obs! Objektfärger åsidosätts i det aktuella färgtemat."
#: eeschema/dialogs/dialog_sheet_properties.cpp:384
#, c-format
msgid ""
"To see individual item colors uncheck '%s'\n"
"in Preferences > Eeschema > Colors."
msgstr ""
"Avmarkera '%s' för att se enskilda artikelfärger.\n"
"i Inställningar> Eeschema> Färger."
#: eeschema/dialogs/dialog_sheet_properties.cpp:426
#, c-format
msgid "The file '%s' does not appear to be a valid schematic file."
msgstr "Filen '%s' verkar inte vara en giltig kretsschemafil."
#: eeschema/dialogs/dialog_sheet_properties.cpp:428
msgid "Invalid Schematic File"
msgstr "Ogiltig kretsschemafil"
#: eeschema/dialogs/dialog_sheet_properties.cpp:449
#, c-format
msgid ""
"Cannot normalize new sheet schematic file path:\n"
"'%s'\n"
"against parent sheet schematic file path:\n"
"'%s'."
msgstr ""
"Kunde inte normalisera den nya schemabladssökvägen:\n"
"'%s'\n"
"gentemot det överordnade schemabladets sökväg:\n"
"'%s'."
#: eeschema/dialogs/dialog_sheet_properties.cpp:491
#: kicad/tools/kicad_manager_control.cpp:659
#, c-format
msgid "'%s' already exists."
msgstr "'%s' finns redan."
#: eeschema/dialogs/dialog_sheet_properties.cpp:494
#, c-format
msgid "Link '%s' to this file?"
msgstr "Länka '%s' till den här filen?"
#: eeschema/dialogs/dialog_sheet_properties.cpp:534
#, c-format
msgid "Change '%s' link from '%s' to '%s'?"
msgstr "Ändra '%s' länk från '%s' till '%s'?"
#: eeschema/dialogs/dialog_sheet_properties.cpp:539
#: eeschema/dialogs/dialog_sheet_properties.cpp:556
msgid "This action cannot be undone."
msgstr "Denna åtgärd kan inte ångras."
#: eeschema/dialogs/dialog_sheet_properties.cpp:551
#, c-format
msgid "Create new file '%s' with contents of '%s'?"
msgstr "Skapa ny fil '%s' med innehållet i '%s'?"
#: eeschema/dialogs/dialog_sheet_properties.cpp:589
#, c-format
msgid "Error occurred saving schematic file '%s'."
msgstr "Ett fel uppstod när kretsschemafilen '%s' skulle sparas."
#: eeschema/dialogs/dialog_sheet_properties.cpp:593
#, c-format
msgid "Failed to save schematic '%s'"
msgstr "Det gick inte att spara schemat '%s'"
#: eeschema/dialogs/dialog_sheet_properties.cpp:679
msgid "A sheet must have a name."
msgstr "Ett ark måste ha ett namn."
#: eeschema/dialogs/dialog_sheet_properties.cpp:687
msgid "A sheet must have a file specified."
msgstr "Ett ark måste ha en fil specificerad."
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:128
#: eeschema/lib_field.cpp:538 eeschema/lib_pin.cpp:1148
#: eeschema/lib_pin.cpp:1150 eeschema/lib_text.cpp:402
#: eeschema/lib_textbox.cpp:474 eeschema/sch_field.cpp:770
#: eeschema/sch_label.cpp:886 eeschema/sch_pin.cpp:220
#: eeschema/sch_text.cpp:508 eeschema/sch_textbox.cpp:453
#: pcbnew/teardrop/dialog_teardrop_base.cpp:122
#: pcbnew/teardrop/dialog_teardrop_base.cpp:226
#: pcbnew/teardrop/dialog_teardrop_base.cpp:330
msgid "Style"
msgstr "Stil"
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:130
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:192
msgid "Border width:"
msgstr "Kantbredd:"
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:144
msgid "Border color:"
msgstr "Kantfärg:"
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:157
msgid "Background fill:"
msgstr "Bakgrundsfyllning:"
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:178
msgid "Page number:"
msgstr "Sida nummer:"
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:196
msgid "Hierarchical path:"
msgstr "Hierarkisk sökväg:"
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:200
msgid "path"
msgstr "sökväg"
#: eeschema/dialogs/dialog_sheet_properties_base.h:85
msgid "Sheet Properties"
msgstr "Arkegenskaper"
#: eeschema/dialogs/dialog_signal_list.h:45 eeschema/sch_plotter.cpp:547
msgid "Done"
msgstr "Färdig"
#: eeschema/dialogs/dialog_signal_list_base.cpp:27
msgid "Add signal by name:"
msgstr "Lägg till signal efter namn:"
#: eeschema/dialogs/dialog_signal_list_base.h:50
#: eeschema/sim/sim_plot_frame.cpp:161
msgid "Add Signals"
msgstr "Lägg till Signal"
#: eeschema/dialogs/dialog_sim_command.cpp:116
msgid "You need to select DC source"
msgstr "Du måste välja DC-källa"
#: eeschema/dialogs/dialog_sim_command.cpp:220
msgid "Source 1 and Source 2 must be different"
msgstr "Källa 1 och källa 2 måste vara olika"
#: eeschema/dialogs/dialog_sim_command.cpp:282
msgid "No valid simulation is configured."
msgstr "Ingen giltig simulering är konfigurerad."
#: eeschema/dialogs/dialog_sim_command.cpp:285
msgid ""
"A valid simulation can be configured by selecting a simulation tab, setting "
"the simulation parameters and clicking the OK button with the tab selected."
msgstr ""
"En giltig simulering kan konfigureras genom att välja en simuleringsflik, "
"ställa in simuleringsparametrar och klicka på OK-knappen med fliken vald."
#: eeschema/dialogs/dialog_sim_command.cpp:289
msgid "Exit Without Valid Simulation"
msgstr "Avsluta utan giltig simulering"
#: eeschema/dialogs/dialog_sim_command.cpp:290
msgid "Configure Valid Simulation"
msgstr "Konfigurera giltig simulering"
#: eeschema/dialogs/dialog_sim_command.cpp:587
#: eeschema/dialogs/dialog_sim_command_base.cpp:141
#: eeschema/dialogs/dialog_sim_command_base.cpp:152
#: eeschema/dialogs/dialog_sim_command_base.cpp:163
#: eeschema/dialogs/dialog_sim_command_base.cpp:172
#: eeschema/dialogs/dialog_sim_command_base.cpp:183
#: eeschema/dialogs/dialog_sim_command_base.cpp:192
msgid "Volts"
msgstr "Volt"
#: eeschema/dialogs/dialog_sim_command.cpp:588
msgid "Amperes"
msgstr "Ampere"
#: eeschema/dialogs/dialog_sim_command.cpp:589
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:72
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:85
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:125
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:136
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:147
msgid "Ohms"
msgstr "Ohm"
#: eeschema/dialogs/dialog_sim_command_base.cpp:24
#: eeschema/dialogs/dialog_sim_command_base.cpp:265
msgid "Decade"
msgstr "Dekad"
#: eeschema/dialogs/dialog_sim_command_base.cpp:24
#: eeschema/dialogs/dialog_sim_command_base.cpp:265
msgid "Octave"
msgstr "Oktav"
#: eeschema/dialogs/dialog_sim_command_base.cpp:24
#: eeschema/dialogs/dialog_sim_command_base.cpp:265
msgid "Linear"
msgstr "Linjär"
#: eeschema/dialogs/dialog_sim_command_base.cpp:26
#: eeschema/dialogs/dialog_sim_command_base.cpp:267
msgid "Frequency scale"
msgstr "Frekvensskala"
#: eeschema/dialogs/dialog_sim_command_base.cpp:37
msgid "Number of points per decade:"
msgstr "Antal punkter per dekad:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:47
msgid "Start frequency:"
msgstr "Startfrekvens:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:56
#: eeschema/dialogs/dialog_sim_command_base.cpp:67
msgid "Hertz"
msgstr "Hertz"
#: eeschema/dialogs/dialog_sim_command_base.cpp:60
msgid "Stop frequency:"
msgstr "Stoppfrekvens:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:81
msgid "AC"
msgstr "AC"
#: eeschema/dialogs/dialog_sim_command_base.cpp:91
msgid "Source 2"
msgstr "Källa 2"
#: eeschema/dialogs/dialog_sim_command_base.cpp:96
#: eeschema/dialogs/dialog_sim_command_base.cpp:102
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:176
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:192
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:170
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:268
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:246
#: pcb_calculator/widgets/unit_selector.cpp:256
msgid "V"
msgstr "V"
#: eeschema/dialogs/dialog_sim_command_base.cpp:96
#: eeschema/dialogs/dialog_sim_command_base.cpp:102
msgid "I"
msgstr "I"
#: eeschema/dialogs/dialog_sim_command_base.cpp:96
#: eeschema/dialogs/dialog_sim_command_base.cpp:102
msgid "R"
msgstr "R"
#: eeschema/dialogs/dialog_sim_command_base.cpp:96
#: eeschema/dialogs/dialog_sim_command_base.cpp:102
msgid "TEMP"
msgstr "TEMP"
#: eeschema/dialogs/dialog_sim_command_base.cpp:108
msgid "Source:"
msgstr "Källa:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:112
msgid "Sweep type:"
msgstr "Sveptyp:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:116
msgid "Source 1"
msgstr "Källa 1"
#: eeschema/dialogs/dialog_sim_command_base.cpp:132
msgid "Starting value:"
msgstr "Startvärde:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:156
msgid "Final value:"
msgstr "Slutvärde:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:176
msgid "Increment step:"
msgstr "Ökningssteg:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:202
msgid "Swap sources"
msgstr "Byt källor"
#: eeschema/dialogs/dialog_sim_command_base.cpp:211
msgid "DC Transfer"
msgstr "DC-överföring"
#: eeschema/dialogs/dialog_sim_command_base.cpp:213
#: eeschema/sim/spice_simulator.cpp:69
msgid "Distortion"
msgstr "Förvrängning"
#: eeschema/dialogs/dialog_sim_command_base.cpp:228
msgid "Measured node"
msgstr "Uppmätt nod"
#: eeschema/dialogs/dialog_sim_command_base.cpp:238
msgid "Reference node"
msgstr "Referensnod"
#: eeschema/dialogs/dialog_sim_command_base.cpp:245
msgid "(optional; default GND)"
msgstr "(valfritt; standard GND)"
#: eeschema/dialogs/dialog_sim_command_base.cpp:249
msgid "Noise source"
msgstr "Bullerkälla"
#: eeschema/dialogs/dialog_sim_command_base.cpp:279
msgid "Number of points"
msgstr "Antal poäng"
#: eeschema/dialogs/dialog_sim_command_base.cpp:286
msgid "Start frequency [Hz]"
msgstr "Startfrekvens [Hz]"
#: eeschema/dialogs/dialog_sim_command_base.cpp:293
msgid "Stop frequency [Hz]"
msgstr "Stoppfrekvens [Hz]"
#: eeschema/dialogs/dialog_sim_command_base.cpp:310
#: eeschema/sim/spice_simulator.cpp:72
msgid "Noise"
msgstr "Ljud"
#: eeschema/dialogs/dialog_sim_command_base.cpp:318
msgid "This tab has no settings"
msgstr "Den här fliken har inga inställningar"
#: eeschema/dialogs/dialog_sim_command_base.cpp:329
#: eeschema/sim/spice_simulator.cpp:57
msgid "Operating Point"
msgstr "Driftpunkt"
#: eeschema/dialogs/dialog_sim_command_base.cpp:333
msgid "Pole-Zero"
msgstr "Pol-nollställen"
#: eeschema/dialogs/dialog_sim_command_base.cpp:337
#: eeschema/sim/spice_simulator.cpp:78
msgid "Sensitivity"
msgstr "Känslighet"
#: eeschema/dialogs/dialog_sim_command_base.cpp:341
msgid "Transfer Function"
msgstr "Överföringsfunktion"
#: eeschema/dialogs/dialog_sim_command_base.cpp:351
msgid "Time step:"
msgstr "Tidssteg:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:360
#: eeschema/dialogs/dialog_sim_command_base.cpp:374
#: eeschema/dialogs/dialog_sim_command_base.cpp:388
msgid "seconds"
msgstr "sekunder"
#: eeschema/dialogs/dialog_sim_command_base.cpp:367
msgid "Final time:"
msgstr "Sista gången:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:381
msgid "Initial time:"
msgstr "Starttid:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:392
msgid "(optional; default 0)"
msgstr "(valfritt; standard 0)"
#: eeschema/dialogs/dialog_sim_command_base.cpp:403
#: eeschema/sim/spice_simulator.cpp:66
msgid "Transient"
msgstr "Övergående"
#: eeschema/dialogs/dialog_sim_command_base.cpp:408
msgid "Spice directives:"
msgstr "Spice-direktiv:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:417
msgid "Load directives from schematic"
msgstr "Ladda riktlinjer från kretsschemat"
#: eeschema/dialogs/dialog_sim_command_base.cpp:424 pcbnew/pad.cpp:1702
msgid "Custom"
msgstr "Skräddarsydd"
#: eeschema/dialogs/dialog_sim_command_base.cpp:431
msgid "Add full path for .include library directives"
msgstr "Lägg till hela sökvägen för. Inkludera biblioteksdirektiv"
#: eeschema/dialogs/dialog_sim_command_base.cpp:438
msgid "Compatibility mode:"
msgstr "Kompatibilitetsläge:"
#: eeschema/dialogs/dialog_sim_command_base.cpp:442
msgid "User configuration"
msgstr "Användarkonfiguration"
#: eeschema/dialogs/dialog_sim_command_base.cpp:442
msgid "Spice"
msgstr "Spice"
#: eeschema/dialogs/dialog_sim_command_base.cpp:442
msgid "PSpice"
msgstr "PSpice"
#: eeschema/dialogs/dialog_sim_command_base.cpp:442
msgid "LTSpice"
msgstr "LTSpice"
#: eeschema/dialogs/dialog_sim_command_base.cpp:442
msgid "PSpice and LTSpice"
msgstr "PSpice och LTSpice"
#: eeschema/dialogs/dialog_sim_command_base.cpp:442
msgid "HSpice"
msgstr "HSpice"
#: eeschema/dialogs/dialog_sim_command_base.h:139
msgid "Simulation Command"
msgstr "Simuleringskommando"
#: eeschema/dialogs/dialog_sim_model.cpp:186
#, c-format
msgid "No model named '%s' in library."
msgstr "Ingen modell med namnet '%s' finns i biblioteket."
#: eeschema/dialogs/dialog_sim_model.cpp:269
msgid "Failed to read simulation model from fields."
msgstr "Det gick inte att läsa in simulationsmodell från fält."
#: eeschema/dialogs/dialog_sim_model.cpp:380
msgid "Component:"
msgstr "Komponent:"
#: eeschema/dialogs/dialog_sim_model.cpp:380
#: eeschema/dialogs/dialog_sim_model_base.cpp:54
#: eeschema/dialogs/dialog_sim_model_base.cpp:82
msgid "Model:"
msgstr "Modell:"
#: eeschema/dialogs/dialog_sim_model.cpp:441
#, c-format
msgid "Save parameter '%s (%s)' in Value field"
msgstr "Spara parameter '%s (%s)' i värde-fältet"
#: eeschema/dialogs/dialog_sim_model.cpp:449
msgid "Save primary parameter in Value field"
msgstr "Spara primär parameter i värde-fältet"
#: eeschema/dialogs/dialog_sim_model.cpp:466
#: pcbnew/footprint_wizard_frame.cpp:322
msgid "Parameter"
msgstr "Parameter"
#: eeschema/dialogs/dialog_sim_model.cpp:469 eeschema/lib_item.cpp:51
#: eeschema/lib_pin.cpp:1147 eeschema/sch_label.cpp:880
#: eeschema/sch_pin.cpp:206 eeschema/sch_pin.cpp:219
#: eeschema/symbol_editor/symbol_editor.cpp:1247
#: gerbview/gerber_draw_item.cpp:634
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:37
#: pagelayout_editor/dialogs/properties_frame_base.cpp:29
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:78
#: pcbnew/fp_text.cpp:294 pcbnew/pcb_marker.cpp:193 pcbnew/pcb_shape.cpp:304
#: pcbnew/pcb_track.cpp:833 pcbnew/pcb_track.cpp:907
#: pcbnew/tools/drawing_stackup_table_tool.cpp:249 pcbnew/zone.cpp:527
msgid "Type"
msgstr "Typ"
#: eeschema/dialogs/dialog_sim_model.cpp:587
#: eeschema/dialogs/dialog_sim_model.cpp:630
msgid "Not Connected"
msgstr "Ingen anslutning"
#: eeschema/dialogs/dialog_sim_model.cpp:1063
msgid "Browse Models"
msgstr "Bläddra bland modeller"
#: eeschema/dialogs/dialog_sim_model_base.cpp:30
msgid "SPICE model from file (*.lib, *.sub or *.ibs)"
msgstr "SPICE-modell från fil (*.lib, *.sub eller *.ibs)"
#: eeschema/dialogs/dialog_sim_model_base.cpp:66
msgid "Pin:"
msgstr "Stift:"
#: eeschema/dialogs/dialog_sim_model_base.cpp:77
msgid "Differential"
msgstr "Differentiell"
#: eeschema/dialogs/dialog_sim_model_base.cpp:101
msgid "Built-in SPICE model"
msgstr "Inbyggd SPICE-modell"
#: eeschema/dialogs/dialog_sim_model_base.cpp:110
msgid "Device:"
msgstr "Enhet:"
#: eeschema/dialogs/dialog_sim_model_base.cpp:119
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:27
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:48
msgid "Type:"
msgstr "Typ:"
#: eeschema/dialogs/dialog_sim_model_base.cpp:146
msgid "Page"
msgstr "Sida"
#: eeschema/dialogs/dialog_sim_model_base.cpp:153
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:42
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:23
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:23
#: pcbnew/footprint_wizard_frame.cpp:191
msgid "Parameters"
msgstr "Parametrar"
#: eeschema/dialogs/dialog_sim_model_base.cpp:200
msgid "Code"
msgstr "Kod"
#: eeschema/dialogs/dialog_sim_model_base.cpp:204
msgid "Save {} in Value field as \"{}\""
msgstr "Spara {} i värdefält som \"{}\""
#: eeschema/dialogs/dialog_sim_model_base.cpp:217
msgid "Model"
msgstr "Modell"
#: eeschema/dialogs/dialog_sim_model_base.cpp:236
msgid "Symbol Pin"
msgstr "Symbolstift"
#: eeschema/dialogs/dialog_sim_model_base.cpp:237
msgid "Model Pin"
msgstr "Modellstift"
#: eeschema/dialogs/dialog_sim_model_base.cpp:298
msgid "Pin Assignments"
msgstr "Stifttilldelningar"
#: eeschema/dialogs/dialog_sim_model_base.h:121
msgid "Simulation Model Editor"
msgstr "Simualtionsmodellredigerare"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:86
#: eeschema/fields_grid_table.cpp:863
msgid "Select Footprint..."
msgstr "Välj fotavtryck ..."
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:87
#: eeschema/fields_grid_table.cpp:864
msgid "Browse for footprint"
msgstr "Bläddra efter fotavtryck"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:92
#: eeschema/fields_grid_table.cpp:869 eeschema/tools/ee_actions.cpp:61
msgid "Show Datasheet"
msgstr "Visa datablad"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:93
#: eeschema/fields_grid_table.cpp:870
msgid "Show datasheet in browser"
msgstr "Visa datablad i webbläsaren"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:130
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1205
msgid "The Reference column cannot be hidden."
msgstr "Referenskolumnen kan inte döljas."
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:252
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:266
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:667
msgid "Qty"
msgstr "Antal"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:769
msgid "Group By"
msgstr "Gruppera efter"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1043
#: eeschema/symbol_editor/symbol_editor.cpp:1250
msgid "Datasheet"
msgstr "Datablad"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1065
msgid "New field name:"
msgstr "Nytt fältnamn:"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1065
msgid "Add Field"
msgstr "Lägg till fält"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1074
msgid "Field must have a name."
msgstr "Fältet måste ha ett namn."
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1082
#: eeschema/dialogs/dialog_symbol_properties.cpp:904
#, c-format
msgid "Field name '%s' already in use."
msgstr "Fältnamnet '%s' används redan."
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1120
#, c-format
msgid "Are you sure you want to remove the field '%s'?"
msgstr "Är du säker på att du vill ta bort fältet '%s'?"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1379
msgid "Unsaved data"
msgstr "Data som ej sparats"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1380
msgid "Changes are unsaved. Export unsaved data?"
msgstr "Ändringar har inte sparats. Exportera data som ej sparats?"
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1390
msgid "Save as CSV"
msgstr "Spara som CSV"
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:34
msgid "Add Field..."
msgstr "Lägg till fält ..."
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:37
msgid "Remove Field..."
msgstr "Ta bort fält..."
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:67
msgid "Group symbols"
msgstr "Gruppera symboler"
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:69
msgid "Group symbols together based on common properties"
msgstr "Dela in symboler i grupper baserat på deras gemensamma egenskaper"
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:127
msgid "Export as CSV..."
msgstr "Exportera som CSV ..."
#: eeschema/dialogs/dialog_symbol_fields_table_base.h:88
msgid "Symbol Fields Table"
msgstr "Symbolfältstabell"
#: eeschema/dialogs/dialog_symbol_properties.cpp:160
msgid "Base Name"
msgstr "Basnamn"
#: eeschema/dialogs/dialog_symbol_properties.cpp:161
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:280
msgid "Alternate Assignment"
msgstr "Alternativ uppgift"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:131
msgid "Unit:"
msgstr "Enhet:"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:142
msgid "Alternate symbol (De Morgan)"
msgstr "Alternativ symbol (De Morgan)"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:143
msgid ""
"Use the alternate shape of this symbol.\n"
"For gates, this is the \"De Morgan\" conversion"
msgstr ""
"Använd den alternativa formen på denna symbol.\n"
"För portar är detta \"De Morgan\" -omvandlingen"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:147
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:352
#: pcbnew/dialogs/dialog_create_array_base.cpp:250
#: pcbnew/dialogs/dialog_move_exact.cpp:207
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:116
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:320
#: pcbnew/dialogs/dialog_position_relative.cpp:160
msgid "Angle:"
msgstr "Vinkel:"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:151
msgid "+90"
msgstr "+90"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:151
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:144
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:327
msgid "-90"
msgstr "-90"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:151
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:145
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:328
msgid "180"
msgstr "180"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:157
msgid "Mirror:"
msgstr "Spegelvänd:"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:161
msgid "Not mirrored"
msgstr "Inte spegelvänd"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:161
msgid "Around X axis"
msgstr "Runt X-axeln"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:161
msgid "Around Y axis"
msgstr "Runt Y-axeln"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:175
msgid "Show pin numbers"
msgstr "Visa stiftnummer"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:181
msgid "Show pin names"
msgstr "Visa stiftnamn"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:206
msgid "Exclude from bill of materials"
msgstr "Uteslut från materialförteckningen"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:207
msgid ""
"This is useful for adding symbols for board footprints such as fiducials\n"
"and logos that you do not want to appear in the bill of materials export"
msgstr ""
"Det här är användbart för att lägga till symboler kopplade till fotavtryck "
"på mönsterkortet som man inte vill få\n"
"med i komponentlistan för bestyckning (BOM), till exempel referenspunkter "
"(siktmärken) och logotyper"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:212
msgid ""
"This is useful for adding symbols that only get exported to the bill of "
"materials but\n"
"not required to layout the board such as mechanical fasteners and enclosures"
msgstr ""
"Detta är användbart för att lägga till symboler som bara exporteras till "
"materiallistan men\n"
"inte behöver placeras på mönsterkortet, såsom mekaniska fästelement och "
"kapslingar"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:216
msgid "Do not populate"
msgstr "Monteras ej"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:228
msgid "Update Symbol from Library..."
msgstr "Uppdatera symbol från bibliotek ..."
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:231
#: eeschema/tools/ee_actions.cpp:471
msgid "Change Symbol..."
msgstr "Ändra symbol ..."
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:234
msgid "Edit Symbol..."
msgstr "Redigera symbol ..."
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:240
#: eeschema/tools/ee_actions.cpp:601
msgid "Edit Library Symbol..."
msgstr "Redigera bibliotekssymbol ..."
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:278
msgid "Pin Number"
msgstr "Pinkod"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:279
msgid "Base Pin Name"
msgstr "Basstiftets namn"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:306
msgid "Alternate Pin Assignments"
msgstr "Alternativa stifttilldelningar"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:316
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:384
msgid "Library link:"
msgstr "Bibliotekslänk:"
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:331
msgid "Simulation Model..."
msgstr "Simulationsmodell..."
#: eeschema/dialogs/dialog_symbol_properties_base.h:111
msgid "Symbol Properties"
msgstr "Symbolegenskaper"
#: eeschema/dialogs/dialog_symbol_remap.cpp:59
#, c-format
msgid ""
"Remapping is not possible because you have insufficient privileges to the "
"project folder '%s'."
msgstr ""
"Det är inte möjligt att mappa om eftersom du inte har skrivbehörighet till "
"projektmappen '%s'."
#: eeschema/dialogs/dialog_symbol_remap.cpp:68
msgid ""
"This schematic currently uses the project symbol library list look up method "
"for loading library symbols. KiCad will attempt to map the existing symbols "
"to use the new symbol library table. Remapping will change some project "
"files and schematics may not be compatible with older versions of KiCad. "
"All files that are changed will be backed up to the \"remap_backup\" folder "
"in the project folder should you need to revert any changes. If you choose "
"to skip this step, you will be responsible for manually remapping the "
"symbols."
msgstr ""
"Detta kretsschema använder för närvarande projektets symbolbibliotekslista "
"som uppslagsmetod för att ladda bibliotekssymboler. KiCad kommer att försöka "
"mappa de befintliga symbolerna för att använda den nya "
"symbolbibliotekstabellen. Om mappning ändrar vissa projektfiler och "
"kretsscheman är kanske inte kompatibla med äldre versioner av KiCad. Alla "
"filer som ändras säkerhetskopieras till mappen \"remap_backup\" i "
"projektmappen om du skulle behöva återställa alla ändringar. Om du väljer "
"att hoppa över det här steget är du ansvarig för att manuellt mappa om "
"symbolerna."
#: eeschema/dialogs/dialog_symbol_remap.cpp:208
#, c-format
msgid "Adding library '%s', file '%s' to project symbol library table."
msgstr ""
"Lägger till bibliotek '%s', fil '%s' till projektets symbolbibliotekstabell."
#: eeschema/dialogs/dialog_symbol_remap.cpp:217
#: eeschema/dialogs/panel_sym_lib_table.cpp:774
#, c-format
msgid "Library '%s' not found."
msgstr "Biblioteket '%s' hittades inte."
#: eeschema/dialogs/dialog_symbol_remap.cpp:234
#, c-format
msgid ""
"Error writing project symbol library table.\n"
" %s"
msgstr ""
"Fel vid skrivning av projektets symbolbibliotekstabell.\n"
" %s"
#: eeschema/dialogs/dialog_symbol_remap.cpp:238
msgid "Created project symbol library table.\n"
msgstr "Skapat projektsymbols biblioteksbord.\n"
#: eeschema/dialogs/dialog_symbol_remap.cpp:263
#, c-format
msgid "No symbol %s found in symbol library table."
msgstr "Ingen symbol '%s' hittades i symbolbibliotekstabellen."
#: eeschema/dialogs/dialog_symbol_remap.cpp:269
#, c-format
msgid "Symbol %s mapped to symbol library '%s'."
msgstr "Symbolen '%s' mappad till symbolbiblioteket '%s'."
#: eeschema/dialogs/dialog_symbol_remap.cpp:278
msgid "Symbol library table mapping complete!"
msgstr "Kartläggning av symbolbibliotekstabell komplett!"
#: eeschema/dialogs/dialog_symbol_remap.cpp:348
#, c-format
msgid "Cannot create project remap back up folder '%s'."
msgstr ""
"Det gick inte att skapa säkerhetskopieringsmappen '%s' för projektmapp."
#: eeschema/dialogs/dialog_symbol_remap.cpp:351
#: eeschema/dialogs/dialog_symbol_remap.cpp:503
msgid "Backup Error"
msgstr "Säkerhetskopieringsfel"
#: eeschema/dialogs/dialog_symbol_remap.cpp:353
#: eeschema/dialogs/dialog_symbol_remap.cpp:507
msgid "Continue with Rescue"
msgstr "Fortsätt med Rescue"
#: eeschema/dialogs/dialog_symbol_remap.cpp:354
#: eeschema/dialogs/dialog_symbol_remap.cpp:508
msgid "Abort Rescue"
msgstr "Avbryt räddning"
#: eeschema/dialogs/dialog_symbol_remap.cpp:374
#: eeschema/dialogs/dialog_symbol_remap.cpp:409
#: eeschema/dialogs/dialog_symbol_remap.cpp:434
#: eeschema/dialogs/dialog_symbol_remap.cpp:455
#: eeschema/dialogs/dialog_symbol_remap.cpp:471
#: eeschema/dialogs/dialog_symbol_remap.cpp:487
#, c-format
msgid "Backing up file '%s' to '%s'."
msgstr "Säkerhetskopierar fil '%s' till '%s'."
#: eeschema/dialogs/dialog_symbol_remap.cpp:382
#: eeschema/dialogs/dialog_symbol_remap.cpp:424
#: eeschema/dialogs/dialog_symbol_remap.cpp:442
#: eeschema/dialogs/dialog_symbol_remap.cpp:463
#: eeschema/dialogs/dialog_symbol_remap.cpp:479
#: eeschema/dialogs/dialog_symbol_remap.cpp:495
#, c-format
msgid "Failed to back up file '%s'.\n"
msgstr "Det gick inte att säkerhetskopiera filen '%s'.\n"
#: eeschema/dialogs/dialog_symbol_remap.cpp:416
#, c-format
msgid "Failed to create backup folder '%s'.\n"
msgstr "Det gick inte att skapa säkerhetskopieringsmappen '%s'.\n"
#: eeschema/dialogs/dialog_symbol_remap.cpp:502
msgid "Some of the project files could not be backed up."
msgstr "Vissa av projektfilerna kunde inte säkerhetskopieras."
#: eeschema/dialogs/dialog_symbol_remap_base.cpp:30
#: eeschema/dialogs/dialog_symbol_remap_base.h:54
msgid "Remap Symbols"
msgstr "Remap-symboler"
#: eeschema/dialogs/dialog_text_properties.cpp:157 eeschema/schematic.cpp:299
msgid "<root sheet>"
msgstr "<rotark>"
#: eeschema/dialogs/dialog_text_properties.cpp:160
#, c-format
msgid "Page %s (%s)"
msgstr "Sida %s (%s)"
#: eeschema/dialogs/dialog_text_properties.cpp:493
msgid ""
"Invalid hyperlink destination. Please enter either a valid URL (e.g. file:// "
"or http(s)://) or \"#<page number>\" to create a hyperlink to a page in this "
"schematic."
msgstr ""
"Ogiltig destination för hyperlänk. Vänligen mata in endera en giltig URL (t."
"ex. file:// eller http(s):// eller \"#<sidnummer>\" för att skapa en "
"hyperlänk till en sida i detta kretsschema."
#: eeschema/dialogs/dialog_text_properties_base.cpp:288
msgid "Link:"
msgstr "Länk:"
#: eeschema/dialogs/dialog_text_properties_base.cpp:290
msgid "Make this text item a clickable hyperlink"
msgstr "Gör detta textobjekt till en klickbar hyperlänk"
#: eeschema/dialogs/dialog_update_from_pcb.cpp:43
#: pcbnew/dialogs/dialog_import_netlist.cpp:77
#: pcbnew/dialogs/dialog_update_pcb.cpp:49
msgid "Changes To Be Applied"
msgstr "Ändringar att verkställa"
#: eeschema/dialogs/dialog_update_from_pcb.cpp:65
msgid "Update Schematic"
msgstr "Uppdatera Kretsschemat"
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:32
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:27
msgid ""
"Re-link footprints to schematic symbols based on their reference designators"
msgstr ""
"Länka om fotavtryck till kretsschemasymboler baserat på deras "
"referensbeteckning"
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:33
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:28
msgid ""
"Normally footprints are linked to their symbols via their Unique IDs. "
"Select this option only if you want to reset the footprint linkages based on "
"their reference designators."
msgstr ""
"Normalt är fotavtryck länkade till deras symboler via deras unika ID. Välj "
"det här alternativet endast om du vill återställa fotavtryckslänkarna "
"baserat på deras referensbeteckning."
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:55
msgid "Update references of symbols that have been changed in the PCB editor."
msgstr ""
"Uppdatera referenser för symboler som har ändrats i mönsterkortsredigeraren."
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:59
msgid "Footprint assignments"
msgstr "Fotavtrycksuppdrag"
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:60
msgid ""
"Update footprint associations of symbols whose footprints have been replaced "
"with different footprints in PCB."
msgstr ""
"Uppdatera fotavtrycksassociationer för symboler vars fotavtryck har ersatts "
"med andra fotavtryck i mönsterkortet."
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:65
msgid "Update symbols values that have been replaced in the PCB editor."
msgstr "Uppdatera symbolvärden som har ersatts i mönsterkortsredigeraren."
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:69
msgid "Net names"
msgstr "Nätnamn"
#: eeschema/dialogs/dialog_update_from_pcb_base.h:55
msgid "Update Schematic from PCB"
msgstr "Uppdatera kretsschema från mönsterkort"
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:21
msgid "Parent symbol:"
msgstr "Överordnad symbol:"
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:61
msgid "Remove fields if not in parent symbol"
msgstr "Ta bort fält som inte finns i överordnad symbol"
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:66
msgid "Reset fields if empty in parent symbol"
msgstr "Återställ fält som är tomma i överordnad symbol"
#: eeschema/dialogs/dialog_update_symbol_fields_base.h:68
msgid "Update Symbol Fields"
msgstr "Uppdatera symbolfält"
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:30
msgid "Wire/bus width:"
msgstr "Linjebredd för ledning/buss:"
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:90
msgid "Set width to 0 to use netclass's wire/bus widths."
msgstr ""
"Sätt bredden till 0 för att använda nätklassens linjebredd för ledning/buss."
#: eeschema/dialogs/dialog_wire_bus_properties_base.h:71
msgid "Wire & Bus Properties"
msgstr "Lednings- och bussegenskaper"
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:21
msgid "Symbol Annotation"
msgstr "Symbolnumrering"
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:23
msgid "Automatically annotate symbols"
msgstr "Numrera symboler automatiskt"
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:27
msgid "Recursively annotate subsheets"
msgstr "Numrera referensbeteckningar i underark rekursivt"
#: eeschema/dialogs/panel_eeschema_color_settings.cpp:142
msgid ""
"Some items have the same color as the background\n"
"and they will not be seen on the screen. Are you\n"
"sure you want to use these colors?"
msgstr ""
"Vissa objekt har samma färg som bakgrunden\n"
"och de kommer inte att ses på skärmen. Är du\n"
"är du säker på att du vill använda dessa färger?"
#: eeschema/dialogs/panel_eeschema_color_settings.cpp:201
msgid "(symbol editor only)"
msgstr "(endast symbolredigerare)"
#: eeschema/dialogs/panel_eeschema_color_settings.cpp:247
#: pcbnew/dialogs/panel_pcbnew_color_settings.cpp:484
msgid "Color Preview"
msgstr "Förhandsgranska färg"
#: eeschema/dialogs/panel_eeschema_color_settings.cpp:436
msgid "/path/to/sheet"
msgstr "/ sökväg / till / ark"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:28
#: pcbnew/footprint_edit_frame.cpp:227 pcbnew/footprint_edit_frame.cpp:834
#: pcbnew/pcb_edit_frame.cpp:288 pcbnew/pcb_edit_frame.cpp:1479
msgid "Appearance"
msgstr "Utseende"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:33
msgid "Default font:"
msgstr "Standardtypsnitt:"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:46
msgid "S&how hidden pins"
msgstr "Visa dolda stift"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:49
msgid "Show hidden fields"
msgstr "Visa dolda fält"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:52
msgid "Show ERC errors"
msgstr "Visa ERC-fel"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:55
msgid "Show ERC warnings"
msgstr "Visa ERC-varningar"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:58
msgid "Show ERC exclusions"
msgstr "Visa ERC-undantag"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:61
msgid "Show page limi&ts"
msgstr "Visa sidgränser"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:69
msgid "Selection && Highlighting"
msgstr "Val && markering"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:71
msgid "Draw selected child items"
msgstr "Rita utvalda underordnade objekt"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:74
msgid "Fill selected shapes"
msgstr "Fyll i valda former"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:83
msgid "Selection thickness:"
msgstr "Linjebredd för urval:"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:91
msgid "(selection color can be edited in the \"Colors\" page)"
msgstr "(markeringens färg kan redigeras på sidan \"Färger\")"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:95
msgid "Highlight thickness:"
msgstr "Framhävningstjocklek:"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:110
#: pcbnew/dialogs/panel_display_options_base.cpp:70
msgid "Cross-probing"
msgstr "Korsreferenser"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:112
msgid "Highlight symbols when footprints selected"
msgstr "Framhäv symboler när fotavtryck väljs"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:114
msgid "Highlight symbols corresponding to selected footprints"
msgstr "Framhäver symboler som motsvarar valda fotavtryck"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:118
#: pcbnew/dialogs/panel_display_options_base.cpp:78
msgid "Center view on cross-probed items"
msgstr "Centrera vy på korsrefererade objekt"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:120
msgid "Ensures that cross-probed symbols are visible in the current view"
msgstr "Säkerställer att korsprobade symboler är synliga i den aktuella vyn"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:124
#: pcbnew/dialogs/panel_display_options_base.cpp:84
msgid "Zoom to fit cross-probed items"
msgstr "Zooma för att passa korsrefererade objekt"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:128
#: pcbnew/dialogs/panel_display_options_base.cpp:88
msgid "Highlight cross-probed nets"
msgstr "Markera korsrefererade nät"
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:130
msgid "Highlight nets when they are highlighted in the PCB editor"
msgstr "Markera nät när de är markerade i mönsterkortsredigeraren"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:23
msgid "Line Drawing Mode:"
msgstr "Linjeritningsläge:"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:27
msgid "Free Angle"
msgstr "Fri vinkel"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:27
msgid "90 deg Angle"
msgstr "90 graders vinkel"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:27
msgid "45 deg Angle"
msgstr "45 graders vinkel"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:33
msgid "Mouse drag performs Drag (G) operation"
msgstr "Musdragning utför dragoperation (G)"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:34
msgid "If unchecked, mouse drag will perform move (M) operation"
msgstr "Om det inte är markerat kommer musdragningen att utföra flyttning (M)"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:38
msgid "Automatically start wires on unconnected pins"
msgstr "Starta automatiskt ledare på okopplade stift"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:39
msgid ""
"When enabled, you can start wiring by clicking on unconnected pins even when "
"the wire tool is not active"
msgstr ""
"När aktiverat, kan du starta ledningar genom att klicka på okopplade stift "
"även när trådverktyget inte är aktivt"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:43
#: pcbnew/dialogs/panel_edit_options_base.cpp:383
msgid "<ESC> clears net highlighting"
msgstr "<ESC> rensar nätmarkering"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:44
msgid ""
"First <ESC> in selection tool clears selection, next clears net highlighting"
msgstr ""
"Första <ESC> i urvalsverktyget rensar urvalet, nästa rensar nätmarkering"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:52
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:21
msgid "Defaults for New Objects"
msgstr "Standardvärden för nya objekt"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:57
msgid "Sheet border:"
msgstr "Arkgräns:"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:66
msgid "Sheet background:"
msgstr "Ark bakgrund:"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:84
msgid "Clicking on a pin selects the symbol"
msgstr "Genom att klicka på ett stift markeras symbolen"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:85
msgid ""
"In schematic editor:\n"
"If enabled, clicking on a pin select the parent symbol.\n"
"If disabled, clicking on a pin select only the pin."
msgstr ""
"I kretsschemaredigerare:\n"
"Om aktiverat, väljs överordnad symbol vid klick på ett stift.\n"
"Om inaktiverat, väljer klick på ett stift bara det stiftet."
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:95
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:143
#: pcbnew/dialogs/panel_edit_options_base.cpp:93
#: pcbnew/dialogs/panel_edit_options_base.cpp:165
msgid "Left Click Mouse Commands"
msgstr "Muskommandon för vänsterklick"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:97
#: pcbnew/dialogs/panel_edit_options_base.cpp:95
msgid ""
"Left click (and drag) actions depend on 2 modifier keys:\n"
"Shift and Ctrl."
msgstr ""
"Åtgärder vid vänsterklick (och dra) beror på två modifieringstangenter:\n"
"Skift och Ctrl."
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:109
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:157
#: pcbnew/dialogs/panel_edit_options_base.cpp:119
#: pcbnew/dialogs/panel_edit_options_base.cpp:191
msgid "Long Click"
msgstr "Långklick"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:113
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:161
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:185
#: pcbnew/dialogs/panel_edit_options_base.cpp:124
#: pcbnew/dialogs/panel_edit_options_base.cpp:196
#: pcbnew/dialogs/panel_edit_options_base.cpp:237
msgid "Clarify selection from menu."
msgstr "Förtydliga urvalet från menyn."
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:121
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:169
#: pcbnew/dialogs/panel_edit_options_base.cpp:134
#: pcbnew/dialogs/panel_edit_options_base.cpp:206
msgid "Add item(s) to selection."
msgstr "Lägg till objekt i urvalet."
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:125
#: pcbnew/dialogs/panel_edit_options_base.cpp:139
msgid "Ctrl+Shift"
msgstr "Ctrl + Skift"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:129
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:177
#: pcbnew/dialogs/panel_edit_options_base.cpp:144
#: pcbnew/dialogs/panel_edit_options_base.cpp:216
msgid "Remove item(s) from selection."
msgstr "Ta bort objekt från markeringen."
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:145
#: pcbnew/dialogs/panel_edit_options_base.cpp:167
msgid ""
"Left click (and drag) actions depend on 3 modifier keys:\n"
"Option, Shift and Cmd."
msgstr ""
"Åtgärder vid vänsterklick (och dra) beror på tre modifieringstangenter:\n"
"Alt, Skift och Cmd."
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:173
#: pcbnew/dialogs/panel_edit_options_base.cpp:211
msgid "Shift+Cmd"
msgstr "Skift + Cmd"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:207
msgid "Symbol Field Automatic Placement"
msgstr "Automatisk placering av symbolfält"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:209
msgid "A&utomatically place symbol fields"
msgstr "Autoplacera symbolfält"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:212
msgid "A&llow field autoplace to change justification"
msgstr "Tillåt autoplacering av fält att ändra justering"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:215
msgid "Al&ways align autoplaced fields to the 50 mil grid"
msgstr "Anpassar alltid autoplacerade fält till 50 mil rutnätet"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:222
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:98
msgid "Repeated Items"
msgstr "Upprepade objekt"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:232
msgid "&Horizontal pitch:"
msgstr "&Horisontell förskjutning:"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:243
msgid "&Vertical pitch:"
msgstr "&Vertikal förskjutning:"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:254
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:120
msgid "Label increment:"
msgstr "Steg för referensbeteckning:"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:271
msgid "Dialog Preferences"
msgstr "Dialoginställningar"
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:273
msgid "Show footprint previews in Symbol Chooser"
msgstr "Visa förhandsgranskningar av fotavtryck i Symbolväljare"
#: eeschema/dialogs/panel_setup_buses.cpp:266
#, c-format
msgid "Alias name '%s' already in use."
msgstr "Täcknamnet (alias) '%s' används redan."
#: eeschema/dialogs/panel_setup_buses.cpp:290
msgid "Member net/alias name cannot be empty."
msgstr "Medlemsnät / täcknamn (alias) kan inte lämnas tomt."
#: eeschema/dialogs/panel_setup_buses_base.cpp:24
msgid "Bus definitions:"
msgstr "Bussdefinitioner:"
#: eeschema/dialogs/panel_setup_buses_base.cpp:41
msgid "Alias"
msgstr "Alias"
#: eeschema/dialogs/panel_setup_buses_base.cpp:73
msgid "(source)"
msgstr "(källa)"
#: eeschema/dialogs/panel_setup_buses_base.cpp:91
#, c-format
msgid "Members of '%s':"
msgstr "Medlemmar för '%s':"
#: eeschema/dialogs/panel_setup_buses_base.cpp:108
msgid "Net / Nested Bus Name"
msgstr "Namn för nät / nästlad buss"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:25
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:28
#: pcbnew/dialogs/panel_display_options_base.cpp:35
msgid "Annotations"
msgstr "Anteckningar"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:30
msgid "Symbol unit notation:"
msgstr "Symbolenhet notation:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid ".A"
msgstr ".A"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "-A"
msgstr "-A"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "_A"
msgstr "_A"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid ".1"
msgstr ".1"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "-1"
msgstr "-1"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "_1"
msgstr "_1"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:55
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:44
msgid "Default text size:"
msgstr "Standardtextstorlek:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:66
msgid "Label offset ratio:"
msgstr "Proportionell förskjutning av etikett:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:68
#: eeschema/dialogs/panel_setup_formatting_base.cpp:73
msgid ""
"Percentage of the text size to offset labels above (or below) a wire, bus, "
"or pin"
msgstr ""
"Textens avstånd över (eller under) tråd, buss eller stift, i procent av "
"textstorleken"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:81
msgid "Global label margin:"
msgstr "Marginal för globala etiketter:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:83
#: eeschema/dialogs/panel_setup_formatting_base.cpp:88
msgid "Percentage of the text size to use as space around a global label"
msgstr ""
"Utrymme runt texten i en global etikett, angivet i procent av textstorleken"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:122
msgid "Pin symbol size:"
msgstr "Stiftsymbolens storlek:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:140
#: eeschema/erc_item.cpp:41
msgid "Connections"
msgstr "Anslutningar"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:145
msgid "Junction dot size:"
msgstr "Knutpunktens storlek:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:149
msgid "Smallest"
msgstr "Minsta"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:149
#: pcbnew/dialogs/dialog_plot_base.cpp:112
msgid "Small"
msgstr "Liten"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:149
msgid "Large"
msgstr "Stor"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:149
msgid "Largest"
msgstr "Största"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:168
msgid "Inter-sheet References"
msgstr "Referenser mellan ark"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:170
msgid "Show inter-sheet references"
msgstr "Visa referenser mellan ark"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:176
msgid "Show own page reference"
msgstr "Visa egen sidreferens"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:180
msgid "Standard (1,2,3)"
msgstr "Standard (1,2,3)"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:184
msgid "Abbreviated (1..3)"
msgstr "Förkortad (1..3)"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:193
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:130
msgid "Prefix:"
msgstr "Prefix:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:197
msgid "["
msgstr "["
#: eeschema/dialogs/panel_setup_formatting_base.cpp:202
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:155
msgid "Suffix:"
msgstr "Ändelse:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:206
msgid "]"
msgstr "]"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:221
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:21
msgid "Dashed Lines"
msgstr "Streckade linjer"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:228
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:28
msgid "Dash length:"
msgstr "Strecklängd:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:235
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:35
msgid "Gap length:"
msgstr "Mellanrum:"
#: eeschema/dialogs/panel_setup_formatting_base.cpp:245
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:45
msgid "Dash and dot lengths are ratios of the line width."
msgstr "Streck- och punktlängder är multiplar av linjebredden."
#: eeschema/dialogs/panel_setup_pinmap.cpp:169
msgid "No error or warning"
msgstr "Inget fel eller varning"
#: eeschema/dialogs/panel_setup_pinmap.cpp:174
msgid "Generate warning"
msgstr "Skapa varning"
#: eeschema/dialogs/panel_setup_pinmap.cpp:179
msgid "Generate error"
msgstr "Skapa fel"
#: eeschema/dialogs/panel_setup_pinmap_base.cpp:24
msgid "Pin to Pin Connections"
msgstr "Stift-till-stift-anslutningar"
#: eeschema/dialogs/panel_sym_color_settings_base.cpp:22
#: pagelayout_editor/dialogs/panel_pl_editor_color_settings_base.cpp:18
msgid "Color Theme"
msgstr "Färgtema"
#: eeschema/dialogs/panel_sym_color_settings_base.cpp:25
msgid "Use schematic editor color theme"
msgstr "Använd kretsschemaredigerarens färgtema"
#: eeschema/dialogs/panel_sym_color_settings_base.cpp:31
msgid "Use theme:"
msgstr "Använd tema:"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:29
msgid "&Default line width:"
msgstr "& Standardradbredd:"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:40
msgid ""
"Set to 0 to allow symbols to inherit their line widths from\n"
"their parent Schematic"
msgstr ""
"Sätt till 0 för att låta symboler ärva linjebredd från\n"
"föräldraschemat"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:55
msgid "D&efault pin length:"
msgstr "S&tandard stiftlängd:"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:66
msgid "De&fault pin number size:"
msgstr "Standardstorlek för stiftnummer:"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:77
msgid "Def&ault pin name size:"
msgstr "Standardstorlek för stiftnamn:"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:91
msgid "Show pin &electrical type"
msgstr "Visa &elektrisk typ för stift"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:106
msgid "&Pitch of repeated pins:"
msgstr "&Förskjutning för upprepade stift:"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:110
msgid "100"
msgstr "100"
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:110
msgid "50"
msgstr "50"
#: eeschema/dialogs/panel_sym_lib_table.cpp:356
#: pcbnew/dialogs/panel_fp_lib_table.cpp:545
msgid "A library table row nickname and path cells are empty."
msgstr "Smeknamn- och sökvägsceller är tomma i en bibliotekstabellsrad."
#: eeschema/dialogs/panel_sym_lib_table.cpp:358
#: pcbnew/dialogs/panel_fp_lib_table.cpp:547
msgid "A library table row nickname cell is empty."
msgstr "Smeknamnscellen är tom i en bibliotekstabellsrad."
#: eeschema/dialogs/panel_sym_lib_table.cpp:360
#: pcbnew/dialogs/panel_fp_lib_table.cpp:549
msgid "A library table row path cell is empty."
msgstr "Sökvägscellen är tom i en bibliotekstabellsrad."
#: eeschema/dialogs/panel_sym_lib_table.cpp:362
#: pcbnew/dialogs/panel_fp_lib_table.cpp:551
msgid "Invalid Row Definition"
msgstr "Ogiltig raddefinition"
#: eeschema/dialogs/panel_sym_lib_table.cpp:364
#: pcbnew/dialogs/panel_fp_lib_table.cpp:553
msgid ""
"Empty cells will result in all rows that are invalid to be removed from the "
"table."
msgstr ""
"Tomma celler kommer resultera i att alla rader som är ogiltiga tas bort från "
"tabellen."
#: eeschema/dialogs/panel_sym_lib_table.cpp:366
#: pcbnew/dialogs/panel_fp_lib_table.cpp:555
msgid "Remove Invalid Cells"
msgstr "Ta bort ogiltiga celler"
#: eeschema/dialogs/panel_sym_lib_table.cpp:367
#: pcbnew/dialogs/panel_fp_lib_table.cpp:556
msgid "Cancel Table Update"
msgstr "Avbryt uppdatering av tabell"
#: eeschema/dialogs/panel_sym_lib_table.cpp:380
#, c-format
msgid "Illegal character '%c' in nickname '%s'"
msgstr "Olaglig karaktär '%c' i smeknamn '%s'"
#: eeschema/dialogs/panel_sym_lib_table.cpp:391
#: eeschema/dialogs/panel_sym_lib_table.cpp:432
#: pcbnew/dialogs/panel_fp_lib_table.cpp:580
#: pcbnew/dialogs/panel_fp_lib_table.cpp:622
msgid "Library Nickname Error"
msgstr "Fel i bibliotekets smeknamn"
#: eeschema/dialogs/panel_sym_lib_table.cpp:421
#: pcbnew/dialogs/panel_fp_lib_table.cpp:610
#, c-format
msgid "Multiple libraries cannot share the same nickname ('%s')."
msgstr "Flera bibliotek kan inte dela samma smeknamn ('%s')."
#: eeschema/dialogs/panel_sym_lib_table.cpp:468 eeschema/symbol_library.cpp:534
#, c-format
msgid "Symbol library '%s' failed to load."
msgstr "Symbolbiblioteket '%s' kunde inte laddas."
#: eeschema/dialogs/panel_sym_lib_table.cpp:471
msgid "Error Loading Library"
msgstr "Fel vid inläsning av bibliotek"
#: eeschema/dialogs/panel_sym_lib_table.cpp:518
msgid "Warning: Duplicate Nickname"
msgstr "Varning: Dubblett smeknamn"
#: eeschema/dialogs/panel_sym_lib_table.cpp:519
#: pcbnew/dialogs/panel_fp_lib_table.cpp:905
#, c-format
msgid "A library nicknamed '%s' already exists."
msgstr "Ett bibliotek med smeknamnet \"%s\" finns redan."
#: eeschema/dialogs/panel_sym_lib_table.cpp:520
#: pcbnew/dialogs/panel_fp_lib_table.cpp:906
msgid "One of the nicknames will need to be changed after adding this library."
msgstr "Ett av smeknamnen måste ändras när du har lagt till detta bibliotek."
#: eeschema/dialogs/panel_sym_lib_table.cpp:538 eeschema/sch_base_frame.cpp:283
#: pcbnew/dialogs/panel_fp_lib_table.cpp:921
#: pcbnew/footprint_libraries_utils.cpp:531 pcbnew/tools/pcb_actions.cpp:355
msgid "Skip"
msgstr "Hoppa över"
#: eeschema/dialogs/panel_sym_lib_table.cpp:538
#: pcbnew/dialogs/panel_fp_lib_table.cpp:921
msgid "Add Anyway"
msgstr "Lägg till ändå"
#: eeschema/dialogs/panel_sym_lib_table.cpp:742
msgid ""
"Select one or more rows containing libraries in Legacy format (*.lib) to "
"save as current KiCad format (*.kicad_sym)."
msgstr ""
"Välj en eller flera tabellrader som innehåller äldre bibliotek för att spara "
"som aktuellt format (*.kicad_sym)."
#: eeschema/dialogs/panel_sym_lib_table.cpp:750
#, c-format
msgid ""
"Save '%s' as current KiCad format (*.kicad_sym) and replace legacy entry in "
"table?"
msgstr ""
"Spara '%s' som aktuellt format (*.kicad_sym) och ersätta äldre post i "
"tabellen?"
#: eeschema/dialogs/panel_sym_lib_table.cpp:756
#, c-format
msgid ""
"Save %d Legacy format libraries as current KiCad format (*.kicad_sym) and "
"replace legacy entries in table?"
msgstr ""
"Spara %d äldre bibliotek som aktuellt format (*.kicad_sym) och ersätta äldre "
"poster i tabellen?"
#: eeschema/dialogs/panel_sym_lib_table.cpp:784
#: pcbnew/dialogs/dialog_export_step.cpp:354
#, c-format
msgid "File '%s' already exists. Do you want overwrite this file?"
msgstr "Filen %s finns redan. Vill du skriva över den här filen?"
#: eeschema/dialogs/panel_sym_lib_table.cpp:787
msgid "Migrate Library"
msgstr "Migrera enskilt bibliotek"
#: eeschema/dialogs/panel_sym_lib_table.cpp:811 eeschema/libarch.cpp:153
#: eeschema/libarch.cpp:159
#, c-format
msgid "Failed to save symbol library file '%s'."
msgstr "Det gick inte att skapa symbolbiblioteksfil '%s'."
#: eeschema/dialogs/panel_sym_lib_table.cpp:1042
msgid ""
"Modifications have been made to one or more symbol libraries.\n"
"Changes must be saved or discarded before the symbol library table can be "
"modified."
msgstr ""
"Ändringar har gjorts i ett eller flera symbolbibliotek.\n"
"Ändringar måste sparas eller kasseras innan symbolbibliotekstabellen kan "
"ändras."
#: eeschema/dialogs/panel_sym_lib_table.cpp:1056
msgid "Symbol Libraries"
msgstr "Symbolbibliotek"
#: eeschema/dialogs/panel_sym_lib_table.cpp:1078
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1113
#, c-format
msgid ""
"Error saving global library table:\n"
"\n"
"%s"
msgstr ""
"Fel vid sparar global bibliotektabell:\n"
"\n"
"%s"
#: eeschema/dialogs/panel_sym_lib_table.cpp:1079
#: eeschema/dialogs/panel_sym_lib_table.cpp:1092
#: eeschema/sch_base_frame.cpp:230 eeschema/sch_base_frame.cpp:247
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1503
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1555
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1114
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1127
msgid "File Save Error"
msgstr "Filsparningsfel"
#: eeschema/dialogs/panel_sym_lib_table.cpp:1091
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1126
#, c-format
msgid ""
"Error saving project-specific library table:\n"
"\n"
"%s"
msgstr ""
"Fel vid sparande av projektspecifik bibliotektabell:\n"
"\n"
"%s"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:21
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:21
msgid "Libraries by Scope"
msgstr "Bibliotek efter omfattning"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:47
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:97
#: include/lib_table_grid.h:193 pcbnew/dialogs/panel_fp_lib_table_base.cpp:47
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:96
msgid "Active"
msgstr "Aktiv"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:49
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:99
#: eeschema/symbol_editor/symbol_editor.cpp:519 include/lib_table_grid.h:186
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:49
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:98
#: pcbnew/footprint_libraries_utils.cpp:1026
#: pcbnew/footprint_libraries_utils.cpp:1343
msgid "Nickname"
msgstr "Smeknamn"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:50
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:100
#: include/lib_table_grid.h:187 pcbnew/dialogs/panel_fp_lib_table_base.cpp:50
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:99
msgid "Library Path"
msgstr "Bibliotekssökväg"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:51
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:101
#: include/lib_table_grid.h:190 pcbnew/dialogs/panel_fp_lib_table_base.cpp:51
msgid "Library Format"
msgstr "Biblioteksformat"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:73
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:72
msgid "Global Libraries"
msgstr "Globala bibliotek"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:124
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:121
msgid "Project Specific Libraries"
msgstr "Projektspecifika bibliotek"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:132
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:130
msgid "Add empty row to table"
msgstr "Lägg till tom rad i tabellen"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:137
msgid "Add existing library to table"
msgstr "Lägg till befintligt bibliotek i tabellen"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:155
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:153
msgid "Remove library from table"
msgstr "Ta bort biblioteket från bordet"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:162
msgid "Migrate Libraries"
msgstr "Migrera flera bibliotek"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:172
msgid "Path Substitutions:"
msgstr "Substitut för Sökvägar:"
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:201
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:196
msgid "This is a read-only table which shows pertinent environment variables."
msgstr "Detta är en skrivskyddad tabell som visar relevanta miljövariabler."
#: eeschema/dialogs/panel_template_fieldnames.cpp:41
msgid "Project field name templates:"
msgstr "Projektfältnamnsmallar:"
#: eeschema/dialogs/panel_template_fieldnames.cpp:47
msgid "Global field name templates:"
msgstr "Globala mallar för fältnamn:"
#: eeschema/dialogs/panel_template_fieldnames.cpp:109
msgid "Untitled Field"
msgstr "Namnlöst fält"
#: eeschema/dialogs/panel_template_fieldnames_base.cpp:24
msgid "Field name templates:"
msgstr "Fältnamnsmallar:"
#: eeschema/dialogs/panel_template_fieldnames_base.cpp:45
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:40
msgid "URL"
msgstr "URL"
#: eeschema/eeschema.cpp:366
msgid ""
"An error occurred attempting to load the global symbol library table.\n"
"Please edit this global symbol library table in Preferences menu."
msgstr ""
"Ett fel uppstod vid försök att ladda den globala symbolbibliotekstabellen.\n"
"Redigera denna globala symbolbibliotekstabell i inställningsmenyn."
#: eeschema/eeschema.cpp:428
#, c-format
msgid ""
"Cannot copy file '%s' as it will be overwritten by the new root sheet file."
msgstr ""
"Kan inte kopiera fil '%s' eftersom den kommer att skrivas över av det nya "
"rotarkets fil."
#: eeschema/eeschema_config.cpp:73 pcbnew/pcbnew_config.cpp:55
msgid "Error loading drawing sheet."
msgstr "Fel vid inläsning av ritningsark."
#: eeschema/eeschema_config.cpp:269 eeschema/sheet.cpp:333
#, c-format
msgid "Error loading the symbol library table '%s'."
msgstr "Fel vid inläsning av symbolbibliotekstabellen '%s'."
#: eeschema/eeschema_jobs_handler.cpp:114
#: eeschema/eeschema_jobs_handler.cpp:150
#: eeschema/eeschema_jobs_handler.cpp:186
#: eeschema/eeschema_jobs_handler.cpp:281
msgid "Failed to load schematic file\n"
msgstr "Det gick inte att läsa in kretsschemafil \"%s\"\n"
#: eeschema/eeschema_jobs_handler.cpp:197
#: eeschema/eeschema_jobs_handler.cpp:296
msgid ""
"Warning: schematic has annotation errors, please use the schematic editor to "
"fix them\n"
msgstr ""
"Varning: Kretsschemat har fel i numreringen, vänligen använd "
"kretsschemaredigeraren för att rätta dem\n"
#: eeschema/eeschema_jobs_handler.cpp:206
#: eeschema/eeschema_jobs_handler.cpp:306
msgid "Warning: duplicate sheet names.\n"
msgstr "Varning: dubblett av arknamn.\n"
#: eeschema/eeschema_jobs_handler.cpp:248
msgid "Unknown netlist format.\n"
msgstr "Okänt format för nätlista.\n"
#: eeschema/eeschema_jobs_handler.cpp:355
#, c-format
msgid "Plotting symbol '%s' unit %d to '%s'\n"
msgstr "Plottar symbol '%s' enhet %d till '%s'\n"
#: eeschema/eeschema_jobs_handler.cpp:361
#, c-format
msgid "Plotting symbol '%s' to '%s'\n"
msgstr "Plottar symbol '%s' till '%s'\n"
#: eeschema/eeschema_jobs_handler.cpp:385
#, c-format
msgid "Unable to open destination '%s'"
msgstr "Det går inte att öppna mål '%s'"
#: eeschema/eeschema_jobs_handler.cpp:435
#: eeschema/eeschema_jobs_handler.cpp:495 pcbnew/pcbnew_jobs_handler.cpp:599
#: pcbnew/pcbnew_jobs_handler.cpp:660
msgid "Unable to load library\n"
msgstr "Det gick inte att läsa in bibliotek\n"
#: eeschema/eeschema_jobs_handler.cpp:446
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:121
msgid "There is no symbol selected to save."
msgstr "Det finns ingen symbol valt att spara."
#: eeschema/eeschema_jobs_handler.cpp:503 pcbnew/pcbnew_jobs_handler.cpp:585
msgid "Output path must not conflict with existing path\n"
msgstr "Utmatningssökvägen får inte vara i konflikt med existerande sökväg\n"
#: eeschema/eeschema_jobs_handler.cpp:513
msgid "Saving symbol library in updated format\n"
msgstr "Sparar symbolbibliotek i uppdaterat format\n"
#: eeschema/eeschema_jobs_handler.cpp:527 pcbnew/pcbnew_jobs_handler.cpp:628
msgid "Unable to save library\n"
msgstr "Kunde inte spara bibliotek\n"
#: eeschema/eeschema_jobs_handler.cpp:533
msgid "Symbol library was not updated\n"
msgstr "Symbolbiblioteket uppdaterades inte\n"
#: eeschema/erc.cpp:67 eeschema/erc.cpp:84
msgid "Input Pin"
msgstr "Ingångsstift"
#: eeschema/erc.cpp:68 eeschema/erc.cpp:85
msgid "Output Pin"
msgstr "Utgångsstift"
#: eeschema/erc.cpp:69 eeschema/erc.cpp:86
msgid "Bidirectional Pin"
msgstr "Dubbelriktat stift"
#: eeschema/erc.cpp:70 eeschema/erc.cpp:87
msgid "Tri-State Pin"
msgstr "Tretillståndsutgång"
#: eeschema/erc.cpp:71 eeschema/erc.cpp:88
msgid "Passive Pin"
msgstr "Passivt stift"
#: eeschema/erc.cpp:72 eeschema/erc.cpp:89
msgid "Free Pin"
msgstr "Fritt sitft"
#: eeschema/erc.cpp:73 eeschema/erc.cpp:90
msgid "Unspecified Pin"
msgstr "Ospecificerat stift"
#: eeschema/erc.cpp:74 eeschema/erc.cpp:91
msgid "Power Input Pin"
msgstr "Strömingångsstift"
#: eeschema/erc.cpp:75 eeschema/erc.cpp:92
msgid "Power Output Pin"
msgstr "Strömförsörjningsutgång"
#: eeschema/erc.cpp:76 eeschema/erc.cpp:93
msgid "Open Collector"
msgstr "Öppen kollektor"
#: eeschema/erc.cpp:77 eeschema/erc.cpp:94
msgid "Open Emitter"
msgstr "Öppen emitter"
#: eeschema/erc.cpp:78 eeschema/erc.cpp:95
msgid "No Connection"
msgstr "Ingen förbindelse"
#: eeschema/erc.cpp:288
msgid "Unresolved text variable in drawing sheet"
msgstr "Oupplöst textvariabel i ritningsarket"
#: eeschema/erc.cpp:325
#, c-format
msgid "Bus alias %s has conflicting definitions on %s and %s"
msgstr "Bussalias %s har motstridiga definitioner på %s och %s"
#: eeschema/erc.cpp:394
#, c-format
msgid "Different footprints assigned to %s and %s"
msgstr "%s och %s har tilldelats olika fotavtryck"
#: eeschema/erc.cpp:484
#, c-format
msgid "Symbol %s has unplaced units %s"
msgstr "Symbolen %s har icke utplacerade enheter %s"
#: eeschema/erc.cpp:532
#, c-format
msgid "Symbol %s has input power pins in units %s that are not placed."
msgstr ""
"Symbolen %s har inkommande strömförsörjningsstift %s som inte placerats ut."
#: eeschema/erc.cpp:538
#, c-format
msgid "Symbol %s has input pins in units %s that are not placed."
msgstr "Symbolen %s har ingångsstift i enheter %s som inte är utplacerade."
#: eeschema/erc.cpp:544
#, c-format
msgid "Symbol %s has bidirectional pins in units %s that are not placed."
msgstr "Symbolen %s har tvåvägs stift i enheter %s som inte placerats ut."
#: eeschema/erc.cpp:583
msgid "Pins with 'no connection' type are connected"
msgstr "Stift med typ \"ingen anslutning\" är anslutna"
#: eeschema/erc.cpp:708
#, c-format
msgid "Pins of type %s and %s are connected"
msgstr "Stift av typ %s och %s är anslutna"
#: eeschema/erc.cpp:778
#, c-format
msgid "Pin %s is connected to both %s and %s"
msgstr "Stift %s är anslutet till både %s och %s"
#: eeschema/erc.cpp:880
#, c-format
msgid "The current configuration does not include the library '%s'"
msgstr "Den aktuella konfigurationen inkluderar inte biblioteket '%s'"
#: eeschema/erc.cpp:891
#, c-format
msgid "The library '%s' is not enabled in the current configuration"
msgstr "Biblioteket '%s' är inte aktiverat i den aktuella konfigurationen"
#: eeschema/erc.cpp:906
#, c-format
msgid "Symbol '%s' not found in symbol library '%s'"
msgstr "Symbol '%s' hittades inte i bibliotek '%s'"
#: eeschema/erc.cpp:922
#, c-format
msgid "Symbol '%s' has been modified in library '%s'"
msgstr "Symbol '%s' hittades inte i bibliotek '%s'"
#: eeschema/erc_item.cpp:42
msgid "Conflicts"
msgstr "Konflikter"
#: eeschema/erc_item.cpp:43 pcbnew/dialogs/panel_edit_options_base.cpp:381
#: pcbnew/drc/drc_item.cpp:50
msgid "Miscellaneous"
msgstr "Diverse"
#: eeschema/erc_item.cpp:46
msgid "Duplicate sheet names within a given sheet"
msgstr "Duplikat av arknamn inom ett visst ark"
#: eeschema/erc_item.cpp:50
msgid "Symbol pin or wire end off grid"
msgstr "Symbolstifteller ledarända ej på rutnätet"
#: eeschema/erc_item.cpp:54
msgid "Pin not connected"
msgstr "Stiftet är inte anslutet"
#: eeschema/erc_item.cpp:58
msgid "Input pin not driven by any Output pins"
msgstr "Ingångsstiftet drivs inte av något utgångsstift"
#: eeschema/erc_item.cpp:62
msgid "Input Power pin not driven by any Output Power pins"
msgstr ""
"Strömförsörjnings-ingångsstift drivs inte av något strömförsörjnings-"
"utgångsstift"
#: eeschema/erc_item.cpp:66 eeschema/erc_item.cpp:70
msgid "Conflict problem between pins"
msgstr "Konflikt mellan stift"
#: eeschema/erc_item.cpp:74
msgid "Mismatch between hierarchical labels and sheet pins"
msgstr "Hierarkiska etiketter och arkstift överensstämmer inte"
#: eeschema/erc_item.cpp:78
msgid "A pin with a \"no connection\" flag is connected"
msgstr "Ett stift flaggat med \"ingen anslutning\" är anslutet"
#: eeschema/erc_item.cpp:82
msgid "Unconnected \"no connection\" flag"
msgstr "Oansluten \"ingen anslutning\"-flagga"
#: eeschema/erc_item.cpp:86
msgid "Label not connected to anything"
msgstr "Etiketten är inte ansluten till någonting"
#: eeschema/erc_item.cpp:90
msgid "Global label not connected anywhere else in the schematic"
msgstr "Global etikett inte ansluten någon annanstans i schemat"
#: eeschema/erc_item.cpp:94
msgid "Labels are similar (lower/upper case difference only)"
msgstr "Etiketterna liknar varandra (endast små och stora bokstäver skiljer)"
#: eeschema/erc_item.cpp:98
msgid "Different footprint assigned in another unit of the symbol"
msgstr ""
"Ett annat fotavtryck har tilldelats i en annan enhet tillhörande samma symbol"
#: eeschema/erc_item.cpp:102
msgid "Different net assigned to a shared pin in another unit of the symbol"
msgstr ""
"Ett delat stift har tilldelats ett annat nät i en av symbolens andra enheter"
#: eeschema/erc_item.cpp:106
msgid "Conflict between bus alias definitions across schematic sheets"
msgstr "Konflikt mellan bussaliasdefinitioner mellan kretsschema-ark"
#: eeschema/erc_item.cpp:110
msgid "More than one name given to this bus or net"
msgstr "Bussen eller nätet har tilldelats mer än ett namn"
#: eeschema/erc_item.cpp:114
msgid "Conflicting netclass assignments"
msgstr "Motstridiga nätklasstilldelningar"
#: eeschema/erc_item.cpp:118
msgid "Net is graphically connected to a bus but not a bus member"
msgstr "Nät är grafiskt anslutet till en buss men tillhör inte den bussen"
#: eeschema/erc_item.cpp:122
msgid "Label attached to bus item does not describe a bus"
msgstr "Etiketten som är fäst vid bussobjektet beskriver inte en buss"
#: eeschema/erc_item.cpp:126
msgid "Buses are graphically connected but share no bus members"
msgstr "Bussar är grafiskt anslutna men delar inga bussmedlemmar"
#: eeschema/erc_item.cpp:130
msgid "Invalid connection between bus and net items"
msgstr "Ogiltig anslutning mellan buss- och nätobjekt"
#: eeschema/erc_item.cpp:134 pcbnew/drc/drc_item.cpp:193
msgid "Unresolved text variable"
msgstr "Oupplöst textvariabel"
#: eeschema/erc_item.cpp:138
msgid "SPICE model issue"
msgstr "SPICE-modellproblem"
#: eeschema/erc_item.cpp:142
msgid "Wires not connected to anything"
msgstr "Ledningar som inte är anslutna till någonting"
#: eeschema/erc_item.cpp:146
msgid "Library symbol issue"
msgstr "Problem med bibliotekssymbol"
#: eeschema/erc_item.cpp:150
msgid "Symbol is not annotated"
msgstr "Symbolen är inte numrerad"
#: eeschema/erc_item.cpp:154
msgid "Symbol has more units than are defined"
msgstr "Symbolen har fler enheter än som är definierade"
#: eeschema/erc_item.cpp:158
msgid "Symbol has units that are not placed"
msgstr "Symbolen har icke utplacerade enheter"
#: eeschema/erc_item.cpp:162
msgid "Symbol has input pins that are not placed"
msgstr "Symbolen har ingångsstift som inte är utplacerade"
#: eeschema/erc_item.cpp:166
msgid "Symbol has bidirectional pins that are not placed"
msgstr "Symbolen har tvåvägs stift som inte är utplacerade"
#: eeschema/erc_item.cpp:170
msgid "Symbol has power input pins that are not placed"
msgstr "Symbolen har inkommande strömförsörjningsstift som inte är utplacerade"
#: eeschema/erc_item.cpp:174
msgid "Units of same symbol have different values"
msgstr "Enheter tillhörande samma symbol har olika värden"
#: eeschema/erc_item.cpp:178
msgid "Duplicate reference designators"
msgstr "Dubbla referensbeteckningar"
#: eeschema/erc_item.cpp:182
msgid "Bus Entry needed"
msgstr "Bussanslutning behövs"
#: eeschema/fields_grid_table.cpp:221 eeschema/files-io.cpp:812
#: eeschema/tools/sch_editor_control.cpp:110
msgid "Schematic Files"
msgstr "Kretsschemafiler"
#: eeschema/fields_grid_table.cpp:252 eeschema/fields_grid_table.cpp:612
#: eeschema/fields_grid_table.cpp:766
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:131
msgid "Horizontal"
msgstr "Horisontell"
#: eeschema/fields_grid_table.cpp:253 eeschema/fields_grid_table.cpp:614
#: eeschema/fields_grid_table.cpp:768
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:131
msgid "Vertical"
msgstr "Vertikalt"
#: eeschema/fields_grid_table.cpp:341
msgid "Show Name"
msgstr "Visa namn"
#: eeschema/fields_grid_table.cpp:352
msgid "Allow Autoplacement"
msgstr "Tillåt automatisk placering"
#: eeschema/files-io.cpp:101 eeschema/files-io.cpp:1210
#, c-format
msgid "Schematic '%s' is already open."
msgstr "Schema '%s' är redan öppen."
#: eeschema/files-io.cpp:123
#, c-format
msgid "Schematic '%s' does not exist. Do you wish to create it?"
msgstr "Schema '%s' finns inte. Vill du skapa den?"
#: eeschema/files-io.cpp:141
msgid "Creating Schematic"
msgstr "Skapar schema"
#: eeschema/files-io.cpp:142
msgid "Loading Schematic"
msgstr "Laddar schema"
#: eeschema/files-io.cpp:202
msgid "Schematic file changes are unsaved"
msgstr "Kretsschemat innehåller ändringar som ännu inte sparats till fil"
#: eeschema/files-io.cpp:242
msgid ""
"The entire schematic could not be loaded. Errors occurred attempting to "
"load hierarchical sheets."
msgstr ""
"Hela schemat kunde inte laddas. Fel uppstod vid inläsning av hierarkiska ark."
#: eeschema/files-io.cpp:249 eeschema/files-io.cpp:257
#: eeschema/files-io.cpp:1285 eeschema/sheet.cpp:161
#, c-format
msgid "Error loading schematic '%s'."
msgstr "Fel vid inläsning av schema '%s'."
#: eeschema/files-io.cpp:265
#, c-format
msgid "Memory exhausted loading schematic '%s'."
msgstr "Slut på minne vid inläsning av schema '%s'."
#: eeschema/files-io.cpp:284 eeschema/files-io.cpp:1288
#: eeschema/files-io.cpp:1302 eeschema/sheet.cpp:164
#, c-format
msgid "Failed to load '%s'."
msgstr "Det gick inte att ladda '%s'."
#: eeschema/files-io.cpp:297
msgid ""
"An error was found when loading the schematic that has been automatically "
"fixed. Please save the schematic to repair the broken file or it may not be "
"usable with other versions of KiCad."
msgstr ""
"Ett fel hittades vid laddning av schemat som har fixats automatiskt. Spara "
"schemat för att reparera den trasiga filen, annars kan den inte användas med "
"andra versioner av KiCad."
#: eeschema/files-io.cpp:361
msgid "Illegal entry found in project file symbol library list."
msgstr "Olaglig post hittades i bibliotekslistan för projektfilsymboler."
#: eeschema/files-io.cpp:362
msgid "Project Load Warning"
msgstr "Varning för projektbelastning"
#: eeschema/files-io.cpp:365
msgid ""
"Symbol libraries defined in the project file symbol library list are no "
"longer supported and will be removed.\n"
"\n"
"This may cause broken symbol library links under certain conditions."
msgstr ""
"Symbolbibliotek som definierats i projektfilens symbolbibliotekslista stöds "
"inte längre och kommer att tas bort.\n"
"\n"
"Detta kan orsaka trasiga symbolbibliotekslänkar under vissa förhållanden."
#: eeschema/files-io.cpp:369
msgid "Do not show this dialog again."
msgstr "Visa inte denna dialog igen."
#: eeschema/files-io.cpp:398
#, c-format
msgid "The project symbol library cache file '%s' was not found."
msgstr "Projektets symbolbibliotekscache '%s' kunde inte hittas."
#: eeschema/files-io.cpp:400
msgid ""
"This can result in a broken schematic under certain conditions. If the "
"schematic does not have any missing symbols upon opening, save it "
"immediately before making any changes to prevent data loss. If there are "
"missing symbols, either manual recovery of the schematic or recovery of the "
"symbol cache library file and reloading the schematic is required."
msgstr ""
"Detta kan resultera i ett trasigt kretsschema under vissa förhållanden. Om "
"kretsschemat inte saknar några symboler vid öppning, spara det direkt utan "
"att göra några ändringar för att förhindra dataförlust. Om kretsschemat "
"saknar symboler krävs antingen manuell återhämtning av kretsschemat, eller "
"återhämtning av det cachade symbolbiblioteket och därefter omladdning av "
"kretsschemat."
#: eeschema/files-io.cpp:411
msgid "Load Without Cache File"
msgstr "Ladda utan cache-fil"
#: eeschema/files-io.cpp:412
msgid "Abort"
msgstr "Avbryt"
#: eeschema/files-io.cpp:427 eeschema/files-io.cpp:444
#: pagelayout_editor/files.cpp:258 pcbnew/files.cpp:835
msgid ""
"This file was created by an older version of KiCad. It will be converted to "
"the new format when saved."
msgstr ""
"Den här filen skapades av en äldre version av KiCad. Den kommer att "
"konverteras till det nya formatet när den sparas."
#: eeschema/files-io.cpp:512
msgid "Schematic is read only."
msgstr "Schemat är skrivskyddat."
#: eeschema/files-io.cpp:537
msgid "Insert Schematic"
msgstr "Importera schema"
#: eeschema/files-io.cpp:569
msgid ""
"This operation cannot be undone.\n"
"\n"
"Do you want to save the current document before proceeding?"
msgstr ""
"Denna åtgärd kan inte ångras.\n"
"\n"
"Vill du spara det aktuella dokumentet innan du fortsätter?"
#: eeschema/files-io.cpp:615 pcbnew/files.cpp:170
#: pcbnew/import_gfx/dialog_import_gfx.cpp:191
msgid "All supported formats|"
msgstr "Alla format som stöds"
#: eeschema/files-io.cpp:617
msgid "Import Schematic"
msgstr "Importera schemat"
#: eeschema/files-io.cpp:656
#, c-format
msgid "Unexpected file extension: '%s'."
msgstr "Oväntat filnamnstillägg: '%s'."
#: eeschema/files-io.cpp:709
#, c-format
msgid ""
"Error saving schematic file '%s'.\n"
"%s"
msgstr ""
"Kunde inte spara schemafil '%s'.\n"
"%s"
#: eeschema/files-io.cpp:714 pcbnew/files.cpp:1081
#, c-format
msgid "Failed to create temporary file '%s'."
msgstr "Det gick inte att skapa temporär fil '%s'."
#: eeschema/files-io.cpp:731
#, c-format
msgid ""
"Error saving schematic file '%s'.\n"
"Failed to rename temporary file '%s'."
msgstr ""
"Fel vid sparning av schemafil '%s'.\n"
"Det gick inte att byta namn på tillfällig fil '%s'."
#: eeschema/files-io.cpp:737 pcbnew/files.cpp:1099
#, c-format
msgid "Failed to rename temporary file '%s'."
msgstr "Det gick inte att byta namn på temporär fil '%s'."
#: eeschema/files-io.cpp:760 pagelayout_editor/files.cpp:185
#: pcbnew/files.cpp:1132
#, c-format
msgid "File '%s' saved."
msgstr "Filen '%s' sparades."
#: eeschema/files-io.cpp:765
msgid "File write operation failed."
msgstr "Filskrivningen misslyckades."
#: eeschema/files-io.cpp:839 eeschema/files-io.cpp:912
#: kicad/tools/kicad_manager_control.cpp:117
#: kicad/tools/kicad_manager_control.cpp:225
#, c-format
msgid ""
"Folder '%s' could not be created.\n"
"\n"
"Make sure you have write permissions and try again."
msgstr ""
"Katalogen '%s' kunde inte skapas.\n"
"\n"
"Se till att du har skrivbehörighet och försök igen."
#: eeschema/files-io.cpp:986
msgid "Saving will overwrite existing files."
msgstr ""
"Om du sparar projektet i det nya filformatet skrivs befintliga filer över."
#: eeschema/files-io.cpp:987
msgid "Save Warning"
msgstr "Sparningsvarning"
#: eeschema/files-io.cpp:990
msgid ""
"The following files will be overwritten:\n"
"\n"
msgstr ""
"Följande filer kommer skrivas över:\n"
"\n"
#: eeschema/files-io.cpp:991
msgid "Overwrite Files"
msgstr "Skriv över filerna"
#: eeschema/files-io.cpp:992
msgid "Abort Project Save"
msgstr "Avbryt projekt Spara"
#: eeschema/files-io.cpp:1220
msgid "Importing Schematic"
msgstr "Importerar schema"
#: eeschema/files-io.cpp:1298
#, c-format
msgid "Unhandled exception occurred loading schematic '%s'."
msgstr "Ohanterat undantag inträffade vid inläsning av kretsschema '%s'."
#: eeschema/files-io.cpp:1332
msgid "The current schematic has been modified. Save changes?"
msgstr "Den aktuella schemat har modifierats. Spara ändringar?"
#: eeschema/files-io.cpp:1418
msgid ""
"Well this is potentially embarrassing!\n"
"It appears that the last time you were editing one or more of the schematic "
"files\n"
"were not saved properly. Do you wish to restore the last saved edits you "
"made?"
msgstr ""
"Hoppsan, det här är pinsamt!\n"
"Det verkar som att schemafile(n/rna) inte sparades korrekt senaste gången du "
"ändrade den/dem.\n"
"Vill du återställa de senast sparade ändringarna du gjort?"
#: eeschema/files-io.cpp:1429
#, c-format
msgid ""
"The file '%s` could not be opened.\n"
"Manual recovery of automatically saved files is required."
msgstr ""
"Filen '%s' kunde inte öppnas.\n"
"Manuell återhämtning av automatiskt sparade filer krävs."
#: eeschema/files-io.cpp:1480
msgid "The following automatically saved file(s) could not be restored\n"
msgstr "Följande automatiskt sparad(e) fil(er) kunde inte återställas.\n"
#: eeschema/files-io.cpp:1485
msgid "Manual recovery will be required to restore the file(s) above."
msgstr "Manuell återhämtning krävs för att återställa ovanstående fil(er)."
#: eeschema/files-io.cpp:1505
msgid "The following automatically saved file(s) could not be removed\n"
msgstr "Följande automatiskt sparad(e) fil(er) kunde inte tas bort\n"
#: eeschema/files-io.cpp:1510
msgid "Manual removal will be required for the file(s) above."
msgstr "Manuell borttagning krävs för ovanstående fil(er)."
#: eeschema/files-io.cpp:1521
#, c-format
msgid ""
"The automatic save master file\n"
"'%s'\n"
"could not be deleted."
msgstr ""
"Huvudfilen för automatisk sparning\n"
"'%s'\n"
"kunde inte tas bort."
#: eeschema/files-io.cpp:1529
msgid ""
"This file must be manually removed or the auto save feature will be\n"
"shown every time the schematic editor is launched."
msgstr ""
"Denna fil måste tas bort manuellt, annars kommer autospar-\n"
"funktionen visas varje gång kretsschemaredigeraren startas."
#: eeschema/generate_alias_info.cpp:37 eeschema/sch_symbol.cpp:1615
msgid "Derived from"
msgstr "Härledd från"
#: eeschema/generate_alias_info.cpp:121 eeschema/sim/spice_simulator.cpp:85
#: kicad/pcm/pcm.cpp:798 pcbnew/footprint.cpp:1023 pcbnew/zone.cpp:595
msgid "Unknown"
msgstr "Okänd"
#: eeschema/lib_field.cpp:549 eeschema/lib_text.cpp:413
#: eeschema/sch_field.cpp:781
msgid "H Justification"
msgstr "Horisontell justering"
#: eeschema/lib_field.cpp:558 eeschema/lib_text.cpp:422
#: eeschema/sch_field.cpp:790
msgid "V Justification"
msgstr "Vertikal justering"
#: eeschema/lib_item.cpp:61 eeschema/sch_pin.cpp:209
msgid "no"
msgstr "nej"
#: eeschema/lib_item.cpp:63 eeschema/sch_pin.cpp:211
msgid "yes"
msgstr "ja"
#: eeschema/lib_item.cpp:67 eeschema/sch_pin.cpp:215
msgid "Converted"
msgstr "Konverterad"
#: eeschema/lib_item.cpp:70
msgid "Private"
msgstr "Privat"
#: eeschema/lib_pin.cpp:1161 pcbnew/dialogs/dialog_pad_properties_base.cpp:1456
msgid "Pos X"
msgstr "Position X"
#: eeschema/lib_pin.cpp:1162 pcbnew/dialogs/dialog_pad_properties_base.cpp:1457
msgid "Pos Y"
msgstr "Position Y"
#: eeschema/lib_pin.cpp:1331
#, c-format
msgid "Pin %s [%s, %s, %s]"
msgstr "Stift %s [%s, %s, %s]"
#: eeschema/lib_pin.cpp:1339
#, c-format
msgid "Pin %s [%s, %s]"
msgstr "Stift %s [%s, %s]"
#: eeschema/lib_pin.cpp:1349
#, c-format
msgid "Hidden pin %s [%s, %s, %s]"
msgstr "Gömt stift %s [%s, %s, %s]"
#: eeschema/lib_pin.cpp:1357
#, c-format
msgid "Hidden pin %s [%s, %s]"
msgstr "Gömt stift %s [%s, %s]"
#: eeschema/lib_shape.cpp:457 eeschema/sch_shape.cpp:407
#, c-format
msgid "Arc, radius %s"
msgstr "Båge, radie %s"
#: eeschema/lib_shape.cpp:461 eeschema/sch_shape.cpp:411
#, c-format
msgid "Circle, radius %s"
msgstr "Cirkel, radie %s"
#: eeschema/lib_shape.cpp:470 eeschema/sch_shape.cpp:420
#, c-format
msgid "Polyline, %d points"
msgstr "Polyline, %d poäng"
#: eeschema/lib_shape.cpp:474 eeschema/sch_shape.cpp:424
#, c-format
msgid "Bezier Curve, %d points"
msgstr "Bezierkurva, %d punkter"
#: eeschema/lib_symbol.cpp:407 eeschema/sch_symbol.cpp:432
#: eeschema/tools/sch_edit_tool.cpp:115
#, c-format
msgid "Unit %s"
msgstr "Enhet %s"
#: eeschema/lib_text.cpp:453 eeschema/sch_text.cpp:403
#, c-format
msgid "Graphic Text '%s'"
msgstr "Grafisk text '%s'"
#: eeschema/lib_textbox.cpp:369 eeschema/sch_textbox.cpp:372
msgid "Graphic Text Box"
msgstr "Grafisk textruta"
#: eeschema/lib_textbox.cpp:472 eeschema/sch_label.cpp:884
#: eeschema/sch_text.cpp:506 eeschema/sch_textbox.cpp:451
msgid "Bold Italic"
msgstr "Fet kursiv"
#: eeschema/lib_textbox.cpp:478 eeschema/sch_textbox.cpp:457
#: pcbnew/fp_textbox.cpp:321 pcbnew/pcb_textbox.cpp:314
msgid "Box Width"
msgstr "Textrutans bredd"
#: eeschema/lib_textbox.cpp:481 eeschema/sch_textbox.cpp:460
#: pcbnew/fp_textbox.cpp:324 pcbnew/pcb_textbox.cpp:317
msgid "Box Height"
msgstr "Textrutans höjd"
#: eeschema/libarch.cpp:101
#, c-format
msgid "Failed to add symbol %s to library file '%s'."
msgstr "Det gick inte att lägga till symbolen '%s' till biblioteksfilen '%s'."
#: eeschema/libarch.cpp:110
msgid "Unexpected exception occurred."
msgstr "Ett oväntat undantag inträffade."
#: eeschema/libarch.cpp:125
#, c-format
msgid "Symbol %s not found in any library or cache."
msgstr "Symbol %s hittades inte i något bibliotek eller cache."
#: eeschema/libarch.cpp:141
#, c-format
msgid "Errors occurred creating symbol library %s."
msgstr "Fel uppstod när symbolbiblioteket %s skapades."
#: eeschema/menubar.cpp:72 kicad/menubar.cpp:74
#: pagelayout_editor/menubar.cpp:64 pcbnew/menubar_pcb_editor.cpp:74
msgid "Open Recent"
msgstr "Öppna senaste"
#: eeschema/menubar.cpp:73 include/file_history.h:54
#: pagelayout_editor/menubar.cpp:65 pcbnew/menubar_pcb_editor.cpp:75
msgid "Clear Recent Files"
msgstr "Rensa senaste filer"
#: eeschema/menubar.cpp:98
msgid "Insert Schematic Sheet Content..."
msgstr "Lägg till innehåll från kretsschema-ark..."
#: eeschema/menubar.cpp:99
msgid ""
"Append schematic sheet content from another project to the current sheet"
msgstr ""
"Lägg till innehåll från ett kretsschema-ark i ett annat projekt, till det "
"aktuella arket"
#: eeschema/menubar.cpp:107 pcbnew/menubar_footprint_editor.cpp:65
#: pcbnew/menubar_pcb_editor.cpp:112
msgid "Import"
msgstr "Importera"
#: eeschema/menubar.cpp:109
msgid "Non-KiCad Schematic..."
msgstr "Icke-KiCad-schema..."
#: eeschema/menubar.cpp:110
msgid ""
"Replace current schematic sheet with one imported from another application"
msgstr ""
"Ersätt det aktuella kretsschema-arket med ett importerat från ett annat "
"program"
#: eeschema/menubar.cpp:114
msgid "Footprint Assignments..."
msgstr "Fotavtryckstilldelningar..."
#: eeschema/menubar.cpp:120 eeschema/symbol_editor/menubar_symbol_editor.cpp:68
#: pcbnew/dialogs/dialog_export_step.cpp:124
#: pcbnew/dialogs/dialog_export_svg.cpp:93
#: pcbnew/menubar_footprint_editor.cpp:74 pcbnew/menubar_pcb_editor.cpp:127
msgid "Export"
msgstr "Exportera"
#: eeschema/menubar.cpp:122
msgid "Drawing to Clipboard"
msgstr "Ritning till urklipp"
#: eeschema/menubar.cpp:123 pcbnew/menubar_pcb_editor.cpp:115
#: pcbnew/pcb_edit_frame.cpp:207
msgid "Netlist..."
msgstr "Nätlista..."
#: eeschema/menubar.cpp:125
msgid "Symbols to Library..."
msgstr "Symboler till bibliotek..."
#: eeschema/menubar.cpp:127
msgid "Symbols to New Library..."
msgstr "Symboler till nytt bibliotek..."
#: eeschema/menubar.cpp:195
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:124
#: gerbview/menubar.cpp:188 pagelayout_editor/menubar.cpp:119
#: pcbnew/menubar_footprint_editor.cpp:138 pcbnew/menubar_pcb_editor.cpp:248
msgid "&Units"
msgstr "&Enheter"
#: eeschema/menubar.cpp:317
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:183
#: pagelayout_editor/menubar.cpp:172 pcbnew/menubar_footprint_editor.cpp:255
#: pcbnew/menubar_pcb_editor.cpp:470
msgid "&Place"
msgstr "&Placera"
#: eeschema/menubar.cpp:318
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:184
#: pagelayout_editor/menubar.cpp:173 pcbnew/menubar_footprint_editor.cpp:256
#: pcbnew/menubar_pcb_editor.cpp:472
msgid "&Inspect"
msgstr "&Inspektera"
#: eeschema/menubar.cpp:319 gerbview/menubar.cpp:240 kicad/menubar.cpp:216
#: pcbnew/menubar_footprint_editor.cpp:257 pcbnew/menubar_pcb_editor.cpp:473
msgid "&Tools"
msgstr "&Verktyg"
#: eeschema/menubar.cpp:320
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:185
#: pagelayout_editor/menubar.cpp:174 pcbnew/menubar_footprint_editor.cpp:258
#: pcbnew/menubar_pcb_editor.cpp:474
msgid "P&references"
msgstr "&Inställningar"
#: eeschema/netlist_exporters/netlist_exporter_spice.cpp:95
#, c-format
msgid "Failed to generate a name for '%s': exceeded UINT64_MAX"
msgstr "Misslyckades att skapa namn för '%s': överskred UINT64_MAX"
#: eeschema/netlist_exporters/netlist_exporter_spice.cpp:274
#, c-format
msgid ""
"Error reading simulation model from symbol '%s':\n"
"%s"
msgstr ""
"Fel vid inläsning av simulationsmodell från symbol '%s':\n"
"%s"
#: eeschema/netlist_exporters/netlist_exporter_spice.cpp:408
#, c-format
msgid ""
"Error reading simulation model library '%s':\n"
"%s"
msgstr ""
"Fel vid inläsning av simulationsmodellbibliotek '%s':\n"
"%s"
#: eeschema/netlist_exporters/netlist_exporter_spice.cpp:467
#, c-format
msgid "Could not open file '%s' to write IBIS model"
msgstr "Kunde inte öppna fil '%s' för att skriva IBIS-modell"
#: eeschema/netlist_exporters/netlist_exporter_spice.cpp:518
#, c-format
msgid "Could not find library file '%s'"
msgstr "Kunde inte hitta biblioteksfilen '%s'"
#: eeschema/netlist_exporters/netlist_generator.cpp:145
#, c-format
msgid "Command error. Return code %d."
msgstr "Kommandofel. Returkod %d."
#: eeschema/netlist_exporters/netlist_generator.cpp:150
msgid "Success."
msgstr "Slutförd."
#: eeschema/netlist_exporters/netlist_generator.cpp:197
msgid "Error: duplicate sheet names. Continue?"
msgstr "Fel: duplikat av arknamn. Fortsätta?"
#: eeschema/picksymbol.cpp:169 pcbnew/load_select_footprint.cpp:256
msgid "Recently Used"
msgstr "Nyligen använd"
#: eeschema/picksymbol.cpp:192
#, c-format
msgid "Choose Power Symbol (%d items loaded)"
msgstr "Välj Power Symbol (%d föremål laddade)"
#: eeschema/picksymbol.cpp:194 eeschema/symbol_viewer_frame.cpp:1012
#, c-format
msgid "Choose Symbol (%d items loaded)"
msgstr "Välj symbol (%d föremål laddade)"
#: eeschema/picksymbol.cpp:289
#, c-format
msgid "No alternate body style found for symbol '%s' in library '%s'."
msgstr ""
"Ingen alternativ kroppsstil hittades för symbolen '%s' i biblioteket '%s'."
#: eeschema/pin_numbers.cpp:124 pcbnew/zones.h:65
msgid "none"
msgstr "Ingen"
#: eeschema/pin_type.cpp:57 eeschema/pin_type.cpp:249
msgid "Free"
msgstr "Fri"
#: eeschema/pin_type.cpp:58 eeschema/pin_type.cpp:250
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:186
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:193
msgid "Unspecified"
msgstr "Inte angiven"
#: eeschema/pin_type.cpp:59 eeschema/pin_type.cpp:251
msgid "Power input"
msgstr "Strömingång"
#: eeschema/pin_type.cpp:60 eeschema/pin_type.cpp:252
msgid "Power output"
msgstr "Strömutgång"
#: eeschema/pin_type.cpp:61 eeschema/pin_type.cpp:253
msgid "Open collector"
msgstr "Öppen kollektor"
#: eeschema/pin_type.cpp:62 eeschema/pin_type.cpp:254
msgid "Open emitter"
msgstr "Öppen emitter"
#: eeschema/pin_type.cpp:63 eeschema/pin_type.cpp:255
msgid "Unconnected"
msgstr "Oanslutna"
#: eeschema/pin_type.cpp:80
msgid "Inverted"
msgstr "Inverterad"
#: eeschema/pin_type.cpp:81
msgid "Clock"
msgstr "Klocka"
#: eeschema/pin_type.cpp:82
msgid "Inverted clock"
msgstr "Inverterad klocka"
#: eeschema/pin_type.cpp:83
msgid "Input low"
msgstr "Ingången låg"
#: eeschema/pin_type.cpp:84
msgid "Clock low"
msgstr "Klockan är låg"
#: eeschema/pin_type.cpp:85
msgid "Output low"
msgstr "Output låg"
#: eeschema/pin_type.cpp:86
msgid "Falling edge clock"
msgstr "Fallande kantklocka"
#: eeschema/pin_type.cpp:87
msgid "NonLogic"
msgstr "IckeLogisk"
#: eeschema/project_rescue.cpp:196
#, c-format
msgid "Rename %s to %s"
msgstr "Byt namn %s till %s"
#: eeschema/project_rescue.cpp:311 eeschema/project_rescue.cpp:482
#, c-format
msgid ""
"Cannot rescue symbol %s which is not available in any library or the cache."
msgstr ""
"Det går inte att rädda symbolen %s som inte finns i något bibliotek eller "
"cache."
#: eeschema/project_rescue.cpp:314 eeschema/project_rescue.cpp:488
#, c-format
msgid "Rescue symbol %s found only in cache library to %s."
msgstr "Räddningssymbol %s hittades endast i cachebiblioteket till %s."
#: eeschema/project_rescue.cpp:317 eeschema/project_rescue.cpp:494
#, c-format
msgid "Rescue modified symbol %s to %s"
msgstr "Räddningsmodifierad symbol %s till %s"
#: eeschema/project_rescue.cpp:588
msgid "This project has nothing to rescue."
msgstr "Detta projekt har inget att rädda."
#: eeschema/project_rescue.cpp:603
msgid "No symbols were rescued."
msgstr "Inga symboler räddades."
#: eeschema/project_rescue.cpp:711
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:192
#, c-format
msgid "Failed to create symbol library file '%s'."
msgstr "Det gick inte att skapa symbolbiblioteksfil '%s'."
#: eeschema/project_rescue.cpp:864
#, c-format
msgid "Failed to save rescue library %s."
msgstr "Det gick inte att spara räddningsbiblioteket %s."
#: eeschema/project_rescue.cpp:887
msgid "Error occurred saving project specific symbol library table."
msgstr ""
"Ett fel inträffade när projektspecifik symbolbibliotekstabell sparades."
#: eeschema/project_sch_specific.cpp:109 pcbnew/board_connected_item.cpp:128
msgid "Not Found"
msgstr "Inte Funnen"
#: eeschema/project_sch_specific.cpp:111
msgid "The following libraries were not found:"
msgstr "Följande bibliotek hittades inte:"
#: eeschema/sch_base_frame.cpp:229
#, c-format
msgid ""
"Error saving global symbol library table:\n"
"%s"
msgstr ""
"Fel vid sparar global bibliotektabell:\n"
"%s"
#: eeschema/sch_base_frame.cpp:245
#, c-format
msgid ""
"Error saving project-specific symbol library table:\n"
"%s"
msgstr ""
"Fel vid sparande av projektspecifik bibliotektabell:\n"
"%s"
#: eeschema/sch_base_frame.cpp:264 pcbnew/footprint_libraries_utils.cpp:512
msgid "Add the library to the global library table?"
msgstr "Lägg till biblioteket i den globala bibliotektabellen?"
#: eeschema/sch_base_frame.cpp:265 pcbnew/footprint_libraries_utils.cpp:513
msgid "Add To Global Library Table"
msgstr "Lägg till i den globala bibliotektabellen"
#: eeschema/sch_base_frame.cpp:275 pcbnew/footprint_libraries_utils.cpp:523
msgid "Global"
msgstr "Global"
#: eeschema/sch_base_frame.cpp:278 pcbnew/footprint_libraries_utils.cpp:526
msgid "Choose the Library Table to add the library to:"
msgstr "Välj bibliotektabellen för att lägga till biblioteket i:"
#: eeschema/sch_base_frame.cpp:279 pcbnew/footprint_libraries_utils.cpp:527
msgid "Add To Library Table"
msgstr "Lägg till i bibliotektabellen"
#: eeschema/sch_base_frame.cpp:570
msgid "No symbol libraries are loaded."
msgstr "Inga symbolbibliotek har laddats."
#: eeschema/sch_base_frame.cpp:615
msgid "Select Symbol Library"
msgstr "Välj Symbolbibliotek"
#: eeschema/sch_bus_entry.cpp:418
msgid "Bus to Wire Entry"
msgstr "Buss till Wire Entry"
#: eeschema/sch_bus_entry.cpp:424
msgid "Bus to Bus Entry"
msgstr "Buss till busspost"
#: eeschema/sch_bus_entry.cpp:496 eeschema/sch_line.cpp:887
msgid "Wire"
msgstr "Tråd"
#: eeschema/sch_bus_entry.cpp:497 eeschema/sch_line.cpp:888
msgid "Bus"
msgstr "Buss"
#: eeschema/sch_bus_entry.cpp:500
msgid "Bus Entry Type"
msgstr "Bussposttyp"
#: eeschema/sch_bus_entry.cpp:512 eeschema/sch_label.cpp:912
#: eeschema/sch_line.cpp:912 pcbnew/pad.cpp:966 pcbnew/pcb_track.cpp:935
#: pcbnew/tools/pcb_control.cpp:1537 pcbnew/zone.cpp:557
msgid "Resolved Netclass"
msgstr "Fastställd nätklass"
#: eeschema/sch_connection.cpp:410
msgid "Connection Name"
msgstr "Anslutningens namn"
#: eeschema/sch_connection.cpp:414 eeschema/sch_connection.cpp:423
#, c-format
msgid "Bus Alias %s Members"
msgstr "Bussalias %s Medlemmar"
#: eeschema/sch_edit_frame.cpp:126
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:63
msgid "KiCad Schematic Editor"
msgstr "KiCads kretsschemaredigerare"
#: eeschema/sch_edit_frame.cpp:178 eeschema/sch_edit_frame.cpp:1589
msgid "Schematic Hierarchy"
msgstr "Kretsschemahierarki"
#: eeschema/sch_edit_frame.cpp:269
msgid "New schematic file is unsaved"
msgstr "Nytt kretsschema har innehåll som ännu inte sparats till fil"
#: eeschema/sch_edit_frame.cpp:792 eeschema/sim/sim_plot_frame.cpp:1675
#: eeschema/symbol_editor/symbol_edit_frame.cpp:539
#: eeschema/symbol_editor/symbol_editor.cpp:1153
#: pagelayout_editor/pl_editor_frame.cpp:381
#: pcbnew/footprint_edit_frame.cpp:687 pcbnew/footprint_edit_frame.cpp:727
#: pcbnew/pcb_edit_frame.cpp:1057
#, c-format
msgid "Save changes to '%s' before closing?"
msgstr "Spara ändringar i '%s' innan stängning?"
#: eeschema/sch_edit_frame.cpp:962
msgid ""
"Cannot update the PCB, because the Schematic Editor is opened in stand-alone "
"mode. In order to create/update PCBs from schematics, launch the KiCad shell "
"and create a project."
msgstr ""
"Det går inte att uppdatera mönsterkortet eftersom kretsschemaredigeraren är "
"öppnad i fristående läge. För att skapa/uppdatera mönsterkort från "
"kretsschema, starta Kicad-projekthanteraren och skapa ett projekt."
#: eeschema/sch_edit_frame.cpp:1095 eeschema/sch_plotter.cpp:1026
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:36
msgid "Schematic"
msgstr "Schema"
#: eeschema/sch_edit_frame.cpp:1112
msgid "New Schematic"
msgstr "Nytt schema"
#: eeschema/sch_edit_frame.cpp:1124
#, c-format
msgid "Schematic file '%s' already exists."
msgstr "Schemafil '%s' finns redan."
#: eeschema/sch_edit_frame.cpp:1145
msgid "Open Schematic"
msgstr "Öppna schema"
#: eeschema/sch_edit_frame.cpp:1214
msgid "Assigning footprints requires a fully annotated schematic."
msgstr "Tilldelning av fotavtryck kräver ett fullständigt numrerat schema."
#: eeschema/sch_edit_frame.cpp:1239
msgid "Could not open CvPcb"
msgstr "Det gick inte att öppna CvPcb"
#: eeschema/sch_edit_frame.cpp:1422 eeschema/sim/sim_plot_frame.cpp:346
#: kicad/kicad_manager_frame.cpp:774 pcbnew/footprint_edit_frame.cpp:898
#: pcbnew/pcb_edit_frame.cpp:1568
msgid "[Read Only]"
msgstr "[Skrivskyddad]"
#: eeschema/sch_edit_frame.cpp:1425 eeschema/sim/sim_plot_frame.cpp:349
#: pcbnew/footprint_edit_frame.cpp:907 pcbnew/pcb_edit_frame.cpp:1571
msgid "[Unsaved]"
msgstr "[Osparat]"
#: eeschema/sch_edit_frame.cpp:1429
msgid "[no schematic loaded]"
msgstr "[inget schema laddat]"
#: eeschema/sch_edit_frame.cpp:1612
#, c-format
msgid "Highlighted net: %s"
msgstr "Markerat nät: %s"
#: eeschema/sch_field.cpp:809
#, c-format
msgid "Go to Page %s (%s)"
msgstr "Gå till Sida %s (%s)"
#: eeschema/sch_field.cpp:815
msgid "Back to Previous Selected Sheet"
msgstr "Tillbaka till tidigare valt ark"
#: eeschema/sch_field.cpp:892 eeschema/sch_label.cpp:186
msgid "Sheet References"
msgstr "Arkreferenser"
#: eeschema/sch_io_mgr.cpp:36 pcbnew/io_mgr.cpp:42
#, c-format
msgid "Plugin \"%s\" does not implement the \"%s\" function."
msgstr "Plugin \"%s\" implementerar inte funktionen \"%s\"."
#: eeschema/sch_io_mgr.cpp:37 pcbnew/io_mgr.cpp:43
#, c-format
msgid "Plugin type \"%s\" is not found."
msgstr "Plugin-typen \"%s\" hittades inte."
#: eeschema/sch_io_mgr.cpp:95
#, c-format
msgid "Unknown SCH_FILE_T value: %d"
msgstr "Okänt SCH_FILE_T-värde: %d"
#: eeschema/sch_label.cpp:148
msgid "Tri-State"
msgstr "Tretillstånds"
#: eeschema/sch_label.cpp:867
msgid "Label"
msgstr "Etikett"
#: eeschema/sch_label.cpp:871
msgid "Hierarchical Sheet Pin"
msgstr "Hierarkiskt arkstift"
#: eeschema/sch_label.cpp:899 eeschema/sch_text.cpp:521
msgid "Justification"
msgstr "Justering"
#: eeschema/sch_label.cpp:962 eeschema/sch_line.cpp:851
#: pcbnew/board_connected_item.cpp:166
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:39
#: pcbnew/dialogs/dialog_net_inspector.cpp:963 pcbnew/pad.cpp:964
#: pcbnew/pad.cpp:1745 pcbnew/pcb_track.cpp:933
#: pcbnew/tools/pcb_control.cpp:1534
#: pcbnew/widgets/pcb_properties_panel.cpp:194 pcbnew/zone.cpp:555
#: pcbnew/zone.cpp:1423
msgid "Net"
msgstr "Nät"
#: eeschema/sch_label.cpp:964 eeschema/sch_line.cpp:855
msgid "Resolved netclass"
msgstr "Fastställd nätklass"
#: eeschema/sch_label.cpp:979
msgid "Hierarchical Labels"
msgstr "Hierarkiska etiketter"
#: eeschema/sch_label.cpp:1064
#, c-format
msgid "Label '%s'"
msgstr "Etikett '%s'"
#: eeschema/sch_label.cpp:1241
#, c-format
msgid "Directive Label [%s %s]"
msgstr "Direktivetikett [%s %s]"
#: eeschema/sch_label.cpp:1517
#, c-format
msgid "Global Label '%s'"
msgstr "Global etikett '%s'"
#: eeschema/sch_label.cpp:1650
#, c-format
msgid "Hierarchical Label '%s'"
msgstr "Hierarkisk etikett '%s'"
#: eeschema/sch_label.cpp:1667 pcbnew/dialogs/panel_setup_rules.cpp:662
msgid "Syntax Help"
msgstr "Syntax Hjälp"
#: eeschema/sch_line.cpp:701
#, c-format
msgid "Vertical Wire, length %s"
msgstr "Vertikal tråd, längd %s"
#: eeschema/sch_line.cpp:702
#, c-format
msgid "Vertical Bus, length %s"
msgstr "Vertikal buss, längd %s"
#: eeschema/sch_line.cpp:703
#, c-format
msgid "Vertical Graphic Line, length %s"
msgstr "Vertikal grafisk linje, längd %s"
#: eeschema/sch_line.cpp:710
#, c-format
msgid "Horizontal Wire, length %s"
msgstr "Horisontell tråd, längd %s"
#: eeschema/sch_line.cpp:711
#, c-format
msgid "Horizontal Bus, length %s"
msgstr "Horisontell buss, längd %s"
#: eeschema/sch_line.cpp:712
#, c-format
msgid "Horizontal Graphic Line, length %s"
msgstr "Horisontell grafisk linje, längd %s"
#: eeschema/sch_line.cpp:719
#, c-format
msgid "Wire, length %s"
msgstr "Tråd, längd %s"
#: eeschema/sch_line.cpp:720
#, c-format
msgid "Bus, length %s"
msgstr "Buss, längd %s"
#: eeschema/sch_line.cpp:721
#, c-format
msgid "Graphic Line, length %s"
msgstr "Grafisk linje, längd %s"
#: eeschema/sch_line.cpp:889
msgid "Graphical"
msgstr "Grafiskt"
#: eeschema/sch_line.cpp:892
msgid "Line Type"
msgstr "Linjetyp"
#: eeschema/sch_line.cpp:897
msgid "from netclass"
msgstr "från nätklass"
#: eeschema/sch_marker.cpp:190
msgid "Electrical Rule Check Error"
msgstr "Fel under elektronikkontroll"
#: eeschema/sch_marker.h:99
msgid "ERC Marker"
msgstr "ERC-markör"
#: eeschema/sch_no_connect.h:97
msgid "No Connect"
msgstr "Ingen anslutning"
#: eeschema/sch_plotter.cpp:175 eeschema/widgets/hierarchy_pane.cpp:316
msgid "Root"
msgstr "Rot"
#: eeschema/sch_plotter.cpp:206 pcbnew/pcbnew_jobs_handler.cpp:322
#, c-format
msgid "Plotted to '%s'.\n"
msgstr "Plottade till '%s'.\n"
#: eeschema/sch_plotter.cpp:208 eeschema/sch_plotter.cpp:393
#: eeschema/sch_plotter.cpp:748 eeschema/sch_plotter.cpp:929
#: kicad/pcm/pcm_task_manager.cpp:629
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:162
#: pcbnew/dialogs/dialog_plot.cpp:1137
#: pcbnew/exporters/gendrill_Excellon_writer.cpp:153
#: pcbnew/exporters/gendrill_gerber_writer.cpp:124
msgid "Done."
msgstr "Färdig."
#: eeschema/sch_plotter.cpp:367 eeschema/sch_plotter.cpp:528
#: eeschema/sch_plotter.cpp:723 eeschema/sch_plotter.cpp:895
#: pcbnew/dialogs/dialog_plot.cpp:1115
#, c-format
msgid "Plotted to '%s'."
msgstr "Plottade till '%s'."
#: eeschema/sch_plotter.cpp:1034
#, c-format
msgid "Failed to write plot files to folder '%s'."
msgstr "Det gick inte att skriva plot-filer till mappen '%s'."
#: eeschema/sch_plugin.cpp:138
msgid "Enable <b>debug</b> logging for Symbol*() functions in this SCH_PLUGIN."
msgstr ""
"Aktivera <b> debug </b> -loggning för Symbol * () -funktioner i denna "
"SCH_PLUGIN."
#: eeschema/sch_plugin.cpp:142
msgid "Regular expression <b>symbol name</b> filter."
msgstr "Regeluttryck <b> filter för symbolnamn </b>."
#: eeschema/sch_plugin.cpp:146 pcbnew/plugin.cpp:155
msgid ""
"Enable transaction logging. The mere presence of this option turns on the "
"logging, no need to set a Value."
msgstr ""
"Aktivera transaktionsloggning. Enbart närvaron av detta alternativ aktiverar "
"loggning, inget behov av att ställa in ett värde."
#: eeschema/sch_plugin.cpp:151 pcbnew/plugin.cpp:160
msgid "User name for <b>login</b> to some special library server."
msgstr ""
"Användarnamn för <b> inloggning </b> till någon speciell biblioteksserver."
#: eeschema/sch_plugin.cpp:155 pcbnew/plugin.cpp:163
msgid "Password for <b>login</b> to some special library server."
msgstr "Lösenord för <b> inloggning </b> till någon speciell biblioteksserver."
#: eeschema/sch_plugin.cpp:163
msgid ""
"Enter the python symbol which implements the SCH_PLUGIN::Symbol*() functions."
msgstr ""
"Ange pythonsymbolen som implementerar SCH_PLUGIN :: Symbol * () -"
"funktionerna."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:374
#, c-format
msgid ""
"The file name for sheet %s is undefined, this is probably an Altium signal "
"harness that got converted to a sheet."
msgstr ""
"Filnamnet för ark %s är inte definierat; detta är förmodligen en Altium "
"signalkabelstam som blivit konverterad till ett ark."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:440
#, c-format
msgid "Storage file not fully parsed (%d bytes remaining)."
msgstr "Lagringsfilen ofullständigt inläst (%d bytes återstår)."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:500
#, c-format
msgid "Unknown or unexpected record ID %d found inside \"Additional\" section."
msgstr "Okänt eller oväntat post-ID %d funnet i avsnittet \"Additional\"."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:573
msgid "Record 'IEEE_SYMBOL' not handled."
msgstr "Post 'IEEE_SYMBOL' hanterades inte."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:598
msgid "Record 'PIECHART' not handled."
msgstr "Post 'PIECHART' hanterades inte."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:717
msgid "Compile mask not currently supported."
msgstr "Kompilering av mask stöds för närvarande inte."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:724
#, c-format
msgid "Unknown or unexpected record id %d found inside \"FileHeader\" section."
msgstr "Okänt eller oväntat post-ID %d funnet i avsnittet \"FileHeader\"."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:824
#, c-format
msgid "Symbol \"%s\" in sheet \"%s\" at index %d replaced with symbol \"%s\"."
msgstr "Symbol \"%s\" i ark \"%s\" vid index %d ersatt med symbol \"%s\"."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:928
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2404
msgid "Pin has unexpected orientation."
msgstr "Stift har en oväntad orientering."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:975
msgid "Pin has unexpected electrical type."
msgstr "Stift har en oväntad elektrisk typ."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:980
msgid "Pin has unexpected outer edge type."
msgstr "Stift har oväntad yttre-kant-typ."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:983
msgid "Pin has unexpected inner edge type."
msgstr "Stift har oväntad inre-kant-typ."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1272
#, c-format
msgid "Bezier has %d control points. At least 2 are expected."
msgstr "Bezier har %d kontrollpunkter. Åtminstone 2 förväntas."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1675
#, c-format
msgid "Unsupported ellipse was not imported at (X = %d; Y = %d)."
msgstr "Ellips som ej stöds importerades inte vid (X = %d; Y = %d)."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:1935
#, c-format
msgid ""
"Altium's harness connector (%s) was imported as a hierarchical sheet. Please "
"review the imported schematic."
msgstr ""
"Altiums kontakt för kabelstam (%s) importerades som hierarkiskt ark. "
"Vänligen kontrollera det importerade kretsschemat."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2291
msgid "Power Port with unknown style imported as 'Bar' type."
msgstr "Strömförsörjningsport med okänd stil har importerats som typ 'Bar'."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2332
#, c-format
msgid "Power symbol creates a global label with name '%s'"
msgstr "Power-symbolen skapar en global etikett med namnet '%s'"
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2468
#, c-format
msgid ""
"Altium's harness port (%s) was imported as a text box. Please review the "
"imported schematic."
msgstr ""
"Altiums kabelstamsport (%s) importerades som textruta. Vänligen kontrollera "
"det importerade kretsschemat."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2525
#, c-format
msgid "Port %s has no connections."
msgstr "Port %s har inga anslutningar."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2739
#, c-format
msgid "Embedded file %s not found in storage."
msgstr "Inbäddad fil %s hittades inte i lagring."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2756
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2775
#, c-format
msgid "Error reading image %s."
msgstr "Fel vid inläsning av bild %s."
#: eeschema/sch_plugins/altium/sch_altium_plugin.cpp:2768
#, c-format
msgid "File not found %s."
msgstr "Fil hittades inte %s."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:76
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:74
#, c-format
msgid ""
"The design is too large and cannot be imported into KiCad. \n"
"Please reduce the maximum design size in CADSTAR by navigating to: \n"
"Design Tab -> Properties -> Design Options -> Maximum Design Size. \n"
"Current Design size: %.2f, %.2f millimeters. \n"
"Maximum permitted design size: %.2f, %.2f millimeters.\n"
msgstr ""
"Designen är för stor och kan inte importeras till KiCad.\n"
"Minska den maximala designstorleken i CADSTAR genom att navigera till:\n"
"Fliken Design -> Egenskaper -> Designalternativ -> Maximal designstorlek.\n"
"Nuvarande designstorlek: %.2f, %.2f millimeter.\n"
"Högsta tillåtna designstorlek: %.2f, %.2f millimeter.\n"
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:130
#, c-format
msgid ""
"The CADSTAR design contains variants which has no KiCad equivalent. Only the "
"master variant ('%s') was loaded."
msgstr ""
"CADSTAR-designen innehåller varianter som inte har någon KiCad-motsvarighet. "
"Endast huvudvarianten ('%s') laddades."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:139
msgid ""
"The CADSTAR design contains grouped items which has no KiCad equivalent. Any "
"grouped items have been ungrouped."
msgstr ""
"CADSTAR-designen innehåller grupperade föremål som inte har någon KiCad-"
"motsvarighet. Alla grupperade objekt har avgrupperats."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:146
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:161
msgid ""
"The CADSTAR design contains re-use blocks which has no KiCad equivalent. The "
"re-use block information has been discarded during the import."
msgstr ""
"CADSTAR-designen innehåller återanvändningsblock som inte har någon KiCad-"
"motsvarighet. Informationen om återanvändningsblock har kasserats under "
"importen."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:260
msgid ""
"CADSTAR fonts are different to the ones in KiCad. This will likely result in "
"alignment issues. Please review the imported text elements carefully and "
"correct manually if required."
msgstr ""
"CADSTAR-fonter skiljer sig från KiCads fonter. Detta kommer troligen att "
"orsaka justeringsproblem. Vänligen kontrollera de importerade textelementen "
"noggrant och korrigera manuellt om nödvändigt."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:265
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:170
msgid ""
"The CADSTAR design has been imported successfully.\n"
"Please review the import errors and warnings (if any)."
msgstr ""
"CADSTAR-designen har importerats framgångsrikt.\n"
"Granska importfel och varningar (om sådana finns)."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:318
msgid "The CADSTAR schematic might be corrupt: there is no root sheet."
msgstr "CADSTAR-schemat kan vara korrupt: det finns inget rotark."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:392
#, c-format
msgid ""
"Part definition '%s' references symbol '%s' (alternate '%s') which could not "
"be found in the symbol library. The part has not been loaded into the KiCad "
"library."
msgstr ""
"Deldefinition '%s' hänvisar till symbol '%s' (alternativ '%s') som inte "
"kunde hittas i symbolbiblioteket. Delen har inte laddats in i KiCad-"
"biblioteket."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:423
#, c-format
msgid ""
"Part definition '%s' has an incomplete definition (no symbol definitions are "
"associated with it). The part has not been loaded into the KiCad library."
msgstr ""
"Deldefinition '%s' har en ofullständig definition (inga symboldefinitioner "
"är associerade med den). Delen har inte laddats till KiCad-biblioteket."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:454
#, c-format
msgid ""
"Symbol '%s' references part '%s' which could not be found in the library. "
"The symbol was not loaded"
msgstr ""
"Symbolen '%s' refererar till delen '%s' som inte kunde hittas i biblioteket. "
"Symbolen laddades inte"
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:561
#, c-format
msgid ""
"Symbol ID '%s' references library symbol '%s' which could not be found in "
"the library. Did you export all items of the design?"
msgstr ""
"Symbol-ID '%s' refererar till biblioteksymbolen '%s' som inte hittades i "
"biblioteket. Exporterade du alla objekt i designen?"
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:571
#, c-format
msgid ""
"Symbol ID '%s' is a signal reference or global signal but it has too many "
"pins. The expected number of pins is 1 but %d were found."
msgstr ""
"Symbol-ID '%s' är en signalreferens eller global signal men den har för "
"många stift. Det förväntade antalet stift är 1 men %d hittades."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:703
#, c-format
msgid ""
"Symbol ID '%s' is of an unknown type. It is neither a symbol or a net "
"power / symbol. The symbol was not loaded."
msgstr ""
"Symbol-ID '%s' är av okänd typ. Det är varken en symbol eller en nät-/"
"spänningssymbol. Symbolen laddades inte."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:719
#, c-format
msgid ""
"Symbol '%s' is scaled in the original CADSTAR schematic but this is not "
"supported in KiCad. When the symbol is reloaded from the library, it will "
"revert to the original 1:1 scale."
msgstr ""
"Symbolen '%s' skalas i det ursprungliga CADSTAR-schemat, men detta stöds "
"inte i KiCad. När symbolen laddas om från biblioteket kommer den återgå till "
"den ursprungliga 1:1 storleken."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:1193
#, c-format
msgid ""
"Documentation Symbol '%s' refers to symbol definition ID '%s' which does not "
"exist in the library. The symbol was not loaded."
msgstr ""
"Dokumentationssymbol '%s' avser symboldefinition ID '%s' som inte finns i "
"biblioteket. Symbolen laddades inte."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:1302
msgid "Text Variables could not be set as there is no project attached."
msgstr ""
"Textvariabler kunde inte ställas in eftersom det inte finns något projekt "
"bifogat."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:1756
#, c-format
msgid ""
"Symbol '%s' is rotated by an angle of %.1f degrees in the original CADSTAR "
"design but KiCad only supports rotation angles multiples of 90 degrees. The "
"connecting wires will need manual fixing."
msgstr ""
"Symbolen '%s' roteras med en vinkel på %.1f grader i den ursprungliga "
"CADSTAR-designen men KiCad stöder endast rotationsvinklar multiplar på 90 "
"grader. De anslutande ledarna behöver fixas manuellt."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:1770
#, c-format
msgid ""
"Symbol '%s' references sheet ID '%s' which does not exist in the design. The "
"symbol was not loaded."
msgstr ""
"Symbolen '%s' referensblad ID '%s' som inte finns i designen. Symbolen "
"laddades inte."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:1907
#, c-format
msgid ""
"Net %s references unknown net element %s. The net was not properly loaded "
"and may require manual fixing."
msgstr ""
"Net %s refererar till okänt nätelement %s. Nätet var inte korrekt laddat och "
"kan kräva manuell fixering."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:2216
#, c-format
msgid ""
"The block ID %s (Block name: '%s') is drawn on sheet '%s' but is not linked "
"to another sheet in the design. KiCad requires all sheet symbols to be "
"associated to a sheet, so the block was not loaded."
msgstr ""
"Block-ID %s (blocknamn: '%s') ritas på ark '%s' men är inte länkat till ett "
"annat ark i designen. KiCad kräver att alla arksymboler är associerade till "
"ett ark, så blocket laddades inte."
#: eeschema/sch_plugins/cadstar/cadstar_sch_archive_loader.cpp:2241
#, c-format
msgid ""
"The CADSTAR schematic might be corrupt: Block %s references a child sheet "
"but has no Figure defined."
msgstr ""
"CADSTAR-schemat kan vara korrupt: Block %s refererar till ett underordnat "
"ark men har ingen figur definierad."
#: eeschema/sch_plugins/database/sch_database_plugin.cpp:80
#, c-format
msgid "Error reading database table %s: %s"
msgstr "Fel vid inläsning av databastabell %s: %s"
#: eeschema/sch_plugins/database/sch_database_plugin.cpp:218
#, c-format
msgid "Could not load database library: settings file %s missing or invalid"
msgstr ""
"Kunde inte läsa in databasbibliotek: inställningsfil %s saknas eller är "
"ogiltig"
#: eeschema/sch_plugins/database/sch_database_plugin.cpp:281
#, c-format
msgid "Could not load database library: could not connect to database %s (%s)"
msgstr ""
"Kunde inte läsa in databasbibliotek: kunde inte ansluta till databas %s (%s)"
#: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:452
#: pcbnew/plugins/eagle/eagle_plugin.cpp:3184
#, c-format
msgid "Unable to read file '%s'."
msgstr "Kunde inte läsa fil '%s'."
#: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:1320
#, c-format
msgid ""
"Error parsing Eagle file. Could not find '%s' instance but it is referenced "
"in the schematic."
msgstr ""
"Fel vid inläsning av Eagle-fil. Kunde inte hitta '%s'-instans som refereras "
"i schemat."
#: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:1351
#, c-format
msgid "Could not find '%s' in the imported library."
msgstr "Kunde inte hitta '%s' i det importerade biblioteket."
#: eeschema/sch_plugins/kicad/sch_sexpr_lib_plugin_cache.cpp:54
#: eeschema/sch_plugins/legacy/sch_legacy_lib_plugin_cache.cpp:70
#, c-format
msgid "Library file '%s' not found."
msgstr "Biblioteksfilen '%s' hittades inte."
#: eeschema/sch_plugins/kicad/sch_sexpr_lib_plugin_cache.cpp:516
#: eeschema/sch_plugins/legacy/sch_legacy_lib_plugin_cache.cpp:1816
#, c-format
msgid "library %s does not contain a symbol named %s"
msgstr "bibliotek %s innehåller inte en symbol som heter %s"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:188
msgid "Invalid symbol name"
msgstr "Ogiltigt symbolnamn"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:202
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:2616
#, c-format
msgid "Symbol %s contains invalid character '%c'"
msgstr "Symbol '%s' innehåller ogiltigt tecken '%c'"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:209
msgid "Invalid library identifier"
msgstr "Ogiltig biblioteksidentifierare"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:265
msgid "Invalid parent symbol name"
msgstr "Ogiltigt namn på överordnad symbol"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:274
#, c-format
msgid "No parent for extended symbol %s"
msgstr "Ingen förälder för utökad symbol %s"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:289
msgid "Invalid symbol unit name"
msgstr "Ogiltigt symbolenhetsnamn"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:297
#, c-format
msgid "Invalid symbol unit name prefix %s"
msgstr "Ogiltigt prefix '%s' för symbolenhetsnamn"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:307
#, c-format
msgid "Invalid symbol unit name suffix %s"
msgstr "Ogiltigt suffix '%s' för symbolenhetsnamn"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:313
#, c-format
msgid "Invalid symbol unit number %s"
msgstr "Ogiltigt symbolenhetsnummer %s"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:321
#, c-format
msgid "Invalid symbol convert number %s"
msgstr "Ogiltigt symbolkonverteringsnummer %s"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:654
#, c-format
msgid "Invalid hyperlink url '%s'"
msgstr "Ogiltig URL i hyperlänk '%s'"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:743
msgid "Invalid pin names definition"
msgstr "Ogiltig definition på stiftnamn"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:764
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1926
msgid "Invalid property name"
msgstr "Ogiltigt namn på egenskap"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:772
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1934
msgid "Empty property name"
msgstr "Tomt egenskapsnamn"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:793
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1942
msgid "Invalid property value"
msgstr "Ogiltigt värde på egenskap"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1380
msgid "Invalid pin name"
msgstr "Ogiltigt stiftnamn"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1418
msgid "Invalid pin number"
msgstr "Ogiltigt stiftnummer"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1455
msgid "Invalid alternate pin name"
msgstr "Ogiltigt namn på alternativt stift"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1630
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1690
msgid "Invalid text string"
msgstr "Ogiltig textsträng"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1774
msgid "Invalid page type"
msgstr "Ogiltig sidtyp"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:1901
msgid "Invalid title block comment number"
msgstr "Ogiltigt kommentarsnummer i namnruta"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:2033
msgid "Invalid sheet pin name"
msgstr "Ogiltigt namn på arkstift"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:2041
msgid "Empty sheet pin name"
msgstr "Tomt namn på arkstift"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:2591
msgid "Invalid symbol library name"
msgstr "Ogiltigt namn på symbolbibliotek"
#: eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp:2622
msgid "Invalid symbol library ID"
msgstr "Ogiltigt ID på symbolbibliotek"
#: eeschema/sch_plugins/kicad/sch_sexpr_plugin.cpp:212
#, c-format
msgid ""
"Could not load sheet '%s' because it already appears as a direct ancestor in "
"the schematic hierarchy."
msgstr ""
"Kunde inte läsa in ark '%s' eftersom det redan förekommer som direkt "
"förälder i kretsschemahierarkin."
#: eeschema/sch_plugins/kicad/sch_sexpr_plugin.cpp:1519
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:2170
#, c-format
msgid "Symbol library '%s' already exists."
msgstr "Biblioteket '%s' finns redan."
#: eeschema/sch_plugins/kicad/sch_sexpr_plugin.cpp:1545
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:2196
#, c-format
msgid "Symbol library '%s' cannot be deleted."
msgstr "biblioteket '%s' kan inte raderas."
#: eeschema/sch_plugins/legacy/sch_legacy_lib_plugin_cache.cpp:84
msgid "Unexpected end of file."
msgstr "Oväntat slut på filen."
#: eeschema/sch_plugins/legacy/sch_legacy_lib_plugin_cache.cpp:170
#, c-format
msgid "Insufficient permissions to read library '%s'."
msgstr "Otillräckliga behörigheter för att läsa biblioteket '%s'."
#: eeschema/sch_plugins/legacy/sch_legacy_lib_plugin_cache.cpp:179
msgid "symbol document library file is empty"
msgstr "symboldokumentets biblioteksfil är tom"
#: eeschema/sch_plugins/legacy/sch_legacy_lib_plugin_cache.cpp:550
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:593
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:78
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:107
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:139
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:171
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:198
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:211
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:244
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:257
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:276
msgid "unexpected end of line"
msgstr "oväntade slutet av raden"
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:370
#, c-format
msgid "'%s' does not appear to be an Eeschema file."
msgstr "'%s' verkar inte vara en Eeschema-fil."
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:400
msgid "Missing 'EELAYER END'"
msgstr "EELAYER END saknas"
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:448
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:720
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:730
msgid "unexpected end of file"
msgstr "oväntat slutet på filen"
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:683
msgid "Unexpected end of file"
msgstr "Oväntat slut på filen"
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:1041
msgid "expected 'Italics' or '~'"
msgstr "förväntade 'kursiv' eller '~'"
#: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:1304
msgid "symbol field text attributes must be 3 characters wide"
msgstr "komponentfälts textattribut måste vara 3 tecken breda"
#: eeschema/sch_plugins/legacy/sch_legacy_plugin_helpers.cpp:222
msgid "expected unquoted string"
msgstr "förväntad ociterad sträng"
#: eeschema/sch_screen.cpp:881 eeschema/sch_screen.cpp:973
#, c-format
msgid "Setting schematic symbol '%s %s' library identifier to '%s'."
msgstr "Biblioteksidentifierare för kretsschemasymbol '%s %s' sätts till '%s'."
#: eeschema/sch_screen.cpp:897
#, c-format
msgid ""
"Schematic symbol reference '%s' library identifier is not valid. Unable to "
"link library symbol."
msgstr ""
"Biblioteksidentifierare för kretsschemasymbol med referens '%s' är ogiltig. "
"Kunde inte länka bibliotekssymbolen."
#: eeschema/sch_screen.cpp:913
#, c-format
msgid ""
"Symbol library '%s' not found and no fallback cache library available. "
"Unable to link library symbol."
msgstr ""
"Symbolbiblioteket '%s' hittades inte och inget reservcache-bibliotek "
"tillgängligt. Det går inte att länka bibliotekssymbolen."
#: eeschema/sch_screen.cpp:932
#, c-format
msgid "I/O error %s resolving library symbol %s"
msgstr "I / O-fel %s löser biblioteksymbol %s"
#: eeschema/sch_screen.cpp:952
#, c-format
msgid "Falling back to cache to set symbol '%s:%s' link '%s'."
msgstr "Återgår till cache för att ställa in symbolen '%s: %s' länk '%s'."
#: eeschema/sch_screen.cpp:984
#, c-format
msgid "No library symbol found for schematic symbol '%s %s'."
msgstr "Ingen biblioteksymbol hittades för kretsschemasymbol '%s %s'."
#: eeschema/sch_sheet.cpp:783
msgid "Sheet Name"
msgstr "Arknamn"
#: eeschema/sch_sheet.cpp:790
msgid "Hierarchical Path"
msgstr "Hierarkisk sökväg"
#: eeschema/sch_sheet.cpp:793
msgid "File Name"
msgstr "Filnamn"
#: eeschema/sch_sheet.cpp:1039
#, c-format
msgid "Hierarchical Sheet %s"
msgstr "Hierarkiskt ark %s"
#: eeschema/sch_sheet_path.cpp:57 include/board_item.h:356
msgid "(Deleted Item)"
msgstr "(Borttaget objekt)"
#: eeschema/sch_sheet_pin.cpp:330
#, c-format
msgid "Hierarchical Sheet Pin %s"
msgstr "Hierarkiskt arkstift %s"
#: eeschema/sch_symbol.cpp:1212
msgid "Excluded from BOM"
msgstr "Uteslut från komponentlistan"
#: eeschema/sch_symbol.cpp:1217
msgid "Excluded from board"
msgstr "Uteslut från mönsterkort"
#: eeschema/sch_symbol.cpp:1222
msgid "DNP"
msgstr "Monteras ej"
#: eeschema/sch_symbol.cpp:1593
msgid "Power symbol"
msgstr "Kraftsymbol"
#: eeschema/sch_symbol.cpp:1603
msgid "flags"
msgstr "flaggor"
#: eeschema/sch_symbol.cpp:1608
msgid "Missing parent"
msgstr "Saknad förälder"
#: eeschema/sch_symbol.cpp:1623
msgid "Undefined!!!"
msgstr "Odefinierad!!!"
#: eeschema/sch_symbol.cpp:1630
msgid "<Unknown>"
msgstr "<Okänd>"
#: eeschema/sch_symbol.cpp:1649
msgid "No library defined!"
msgstr "Inget bibliotek definierat!"
#: eeschema/sch_symbol.cpp:1651
#, c-format
msgid "Symbol not found in %s!"
msgstr "Symbol hittades inte i %s!"
#: eeschema/sch_symbol.cpp:1840
#, c-format
msgid "Symbol %s [%s]"
msgstr "Symbol %s [%s]"
#: eeschema/sch_text.cpp:502
msgid "Graphic Text"
msgstr "Grafisk text"
#: eeschema/sch_text_help_md.h:2
msgid ""
"<table>\n"
" <tr>\n"
" <th>Markup</th>\n"
" <th></th>\n"
" <th>Result</th>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>^{superscript}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><sup>superscript</sup> </samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>Driver Board^{Rev A}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>Driver Board<sup>Rev A</sup></samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>_{subscript}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><sub>subscript</sub> </samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>D_{0} - D_{15}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>D<sub>0</sub> - D<sub>15</sub></samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>~{overbar}</samp><br> <br><samp>~{CLK}</"
"samp></td>\n"
" <td></td>\n"
" <td> <samp><u> </u></"
"samp><br> <samp>overbar</samp><br> <samp><u> </u></"
"samp><br> <samp>CLK</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${variable}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><i>variable_value</i></samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${REVISION}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>2020.1</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${refdes:field}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><i>field_value</i> of symbol <i>refdes</i></"
"samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${R3:VALUE}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>150K</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <th>Bus Definition</th>\n"
" <th> "
" </th>\n"
" <th>Resultant Nets</th>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>prefix[m..n]</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>prefixm to prefixn</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>D[0..7]</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>D0, D1, D2, D3, D4, D5, D6, D7</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>{net1 net2 ...}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>net1, net2, ...</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>{SCL SDA}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>SCL, SDA</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>prefix{net1 net2 ...}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>prefix.net1, prefix.net2, ...</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>USB1{D+ D-}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>USB1.D+, USB1.D-</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>MEM{D[1..2] LATCH}</samp></td>\n"
" <td></td>\n"
" <td> <br> <samp>MEM.D1, MEM.D2, MEM.LATCH</samp> </td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>MEM{D_{[1..2]} ~{LATCH}}</samp></td>\n"
" <td></td>\n"
" <td> <samp> <sub> </sub> "
" <sub> </sub> "
" <u> </u></samp><br> <samp>MEM.D<sub>1</"
"sub>, MEM.D<sub>2</sub>, MEM.LATCH</samp> </td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
"</table>\n"
"<p></p>\n"
"<p></p>\n"
"<i>Note that markup has precedence over bus definitions.</i>\n"
"\n"
msgstr ""
"<table>\n"
" <tr>\n"
" <th>Markup</th>\n"
" <th></th>\n"
" <th>Resultat</th>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>^{superscript}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><sup>superscript</sup> </samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>Driverkort^{Rev A}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>Driverkort<sup>Rev A</sup></samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>_{subscript}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><sub>subscript</sub> </samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>D_{0} - D_{15}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>D<sub>0</sub> - D<sub>15</sub></samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>~{överbalk}</samp><br> <br><samp>~{CLK}</"
"samp></td>\n"
" <td></td>\n"
" <td> <samp><u> </u></"
"samp><br> <samp>överbalk</samp><br> <samp><u> </u></"
"samp><br> <samp>CLK</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${variable}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><i>variable_value</i></samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${REVISION}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>2020.1</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${refdes:field}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp><i>field_value</i> av symbol <i>refdes</i></"
"samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>${R3:VALUE}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>150K</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <th>Buss definition</th>\n"
" <th> "
" </th>\n"
" <th>Resulterande nät</th>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>prefix[m..n]</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>prefixm till prefixn</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>D[0..7]</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>D0, D1, D2, D3, D4, D5, D6, D7</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>{net1 net2 ...}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>net1, net2, ...</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>{SCL SDA}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>SCL, SDA</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>prefix{net1 net2 ...}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>prefix.net1, prefix.net2, ...</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>USB1{D+ D-}</samp></td>\n"
" <td></td>\n"
" <td> <br><samp>USB1.D+, USB1.D-</samp></td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>MEM{D[1..2] LATCH}</samp></td>\n"
" <td></td>\n"
" <td> <br> <samp>MEM.D1, MEM.D2, MEM.LATCH</samp> </td>\n"
" </tr>\n"
" <tr>\n"
" <td> <br><samp>MEM{D_{[1..2]} ~{LATCH}}</samp></td>\n"
" <td></td>\n"
" <td> <samp> <sub> </sub> "
" <sub> </sub> "
" <u> </u></samp><br> <samp>MEM.D<sub>1</"
"sub>, MEM.D<sub>2</sub>, MEM.LATCH</samp> </td>\n"
" </tr>\n"
" <tr>\n"
" <td><br></td>\n"
" </tr>\n"
"</table>\n"
"<p></p>\n"
"<p></p>\n"
"<i>OBS: markup har företräde över bussdefinitioner.</i>\n"
"\n"
#: eeschema/sch_validators.cpp:102
#, c-format
msgid "The reference designator cannot contain %s character(s)."
msgstr "Referensbeteckningen kan inte innehålla %s tecken."
#: eeschema/sch_validators.cpp:106
#, c-format
msgid "The value field cannot contain %s character(s)."
msgstr "Värdefältet kan inte innehålla %s tecken."
#: eeschema/sch_validators.cpp:110
#, c-format
msgid "The footprint field cannot contain %s character(s)."
msgstr "Fotavtryckfältet får inte innehålla %s tecken."
#: eeschema/sch_validators.cpp:114
#, c-format
msgid "The datasheet field cannot contain %s character(s)."
msgstr "Databladsfältet kan inte innehålla %s tecken."
#: eeschema/sch_validators.cpp:118
#, c-format
msgid "The sheet name cannot contain %s character(s)."
msgstr "Arknamnet får inte innehålla %s tecken."
#: eeschema/sch_validators.cpp:122
#, c-format
msgid "The sheet filename cannot contain %s character(s)."
msgstr "Arkets filnamn får inte innehålla %s tecken."
#: eeschema/sch_validators.cpp:126
#, c-format
msgid "The field cannot contain %s character(s)."
msgstr "Fältet får inte innehålla %s tecken."
#: eeschema/sch_validators.cpp:138
msgid "The name of the field cannot be empty."
msgstr "Fältets namn kan inte utelämnas."
#: eeschema/sch_validators.cpp:140
msgid "The value of the field cannot be empty."
msgstr "Fältets värde kan inte utelämnas."
#: eeschema/sch_validators.cpp:151
msgid "carriage return"
msgstr "vagnretur"
#: eeschema/sch_validators.cpp:153
msgid "line feed"
msgstr "radmatning"
#: eeschema/sch_validators.cpp:155
msgid "tab"
msgstr "flik"
#: eeschema/sch_validators.cpp:157
msgid "space"
msgstr "blanksteg"
#: eeschema/sch_validators.cpp:171
msgid " or "
msgstr " eller "
#: eeschema/sch_validators.cpp:176
msgid ", or "
msgstr ", eller "
#: eeschema/sch_validators.cpp:189
msgid "The reference designator cannot contain text variable references"
msgstr "Referensbeteckningen kan inte innehålla referenser för textvariabler"
#: eeschema/sch_validators.cpp:196
msgid "Field Validation Error"
msgstr "Fel i fältvalidering"
#: eeschema/sch_validators.cpp:226
msgid "Signal name contains '{' and '}' but is not a valid bus name"
msgstr "Signalnamn innehåller '{' och '}' men är inte ett giltigt bussnamn"
#: eeschema/sch_validators.cpp:231
msgid "Signal name contains '[' or ']' but is not a valid bus name."
msgstr "Signalnamn innehåller '[' eller ']' men är inte ett giltigt bussnamn."
#: eeschema/sheet.cpp:63
#, c-format
msgid ""
"The sheet changes cannot be made because the destination sheet already has "
"the sheet '%s' or one of its subsheets as a parent somewhere in the "
"schematic hierarchy."
msgstr ""
"Arkändringarna kan inte genomföras eftersom destinationsarket redan har ark "
"'%s' eller ett av dess underark som förälder någonstans i "
"kretsschemahierarkin."
#: eeschema/sheet.cpp:84
#, c-format
msgid ""
"The schematic '%s' has not had its symbol library links remapped to the "
"symbol library table. The project this schematic belongs to must first be "
"remapped before it can be imported into the current project."
msgstr ""
"Kretsschemat '%s' har inte fått sina symbolbibliotekslänkar omlagda till "
"symbolbibliotekstabellen. Det projekt som detta kretsschema tillhör måste "
"först ombildas innan det kan importeras till det aktuella projektet."
#: eeschema/sheet.cpp:146
msgid ""
"The entire schematic could not be loaded. Errors occurred attempting to "
"load hierarchical sheet schematics."
msgstr ""
"Hela kretsschemat kunde inte laddas. Fel uppstod när du försökte läsa in "
"hierarkiska kretsschema-ark."
#: eeschema/sheet.cpp:149
msgid "Schematic Load Error"
msgstr "Fel vid öppning av kretsschema"
#: eeschema/sheet.cpp:152
msgid "Use partial schematic"
msgstr "Använd partiellt kretsschema"
#: eeschema/sheet.cpp:231
msgid "Continue Load"
msgstr "Fortsätt ladda"
#: eeschema/sheet.cpp:232
msgid "Cancel Load"
msgstr "Avbryt belastning"
#: eeschema/sheet.cpp:241
msgid ""
"There hierarchical sheets in the loaded schematic file from an older file "
"version resulting in missing symbol instance data. This will result in all "
"of the symbols in the loaded schematic to use either the default instance "
"setting or fall back to the library symbol settings. Loading the project "
"that uses this schematic file and saving to the lastest file version will "
"resolve this issue.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"Det öppnade kretsschemat innehåller hierarkiska ark från en äldre filversion "
"som orsakar saknade data för symbolinstanser. Det resulterar i att alla "
"symboler i det öppnade kretsschemat använder antingen förinställningar för "
"instanser eller faller tillbaka på bibliotekets symbolinställningar. "
"Problemet kan lösas genom att öppna det projekt som använder detta "
"kretsschema och spara som senaste filversion.\n"
"\n"
"Vill du fortsätta?"
#: eeschema/sheet.cpp:248 eeschema/sheet.cpp:276 eeschema/sheet.cpp:317
#: eeschema/sheet.cpp:366 eeschema/sheet.cpp:427
msgid "Continue Load Schematic"
msgstr "Fortsätt ladda schemat"
#: eeschema/sheet.cpp:272
msgid ""
"There are library names in the selected schematic that are missing from the "
"current project library table. This may result in broken symbol library "
"references for the loaded schematic.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"Det finns biblioteksnamn i det valda kretsschemat som saknas i den nuvarande "
"projektbibliotekstabellen. Detta kan resultera i brutna "
"symbolbibliotekslänkar för det laddade schemat. \n"
"\n"
"Vill du fortsätta?"
#: eeschema/sheet.cpp:313
msgid ""
"The selected file was created as part of a different project. Linking the "
"file to this project may result in missing or incorrect symbol library "
"references.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"Den valda filen skapades som del av ett annat projekt. Länkning av filen "
"till detta projekt kan orsaka saknade eller inkorrekta "
"symbolbiblioteksreferenser.\n"
"\n"
"Vill du fortsätta?"
#: eeschema/sheet.cpp:362
msgid ""
"There are symbol library names in the selected schematic that are missing "
"from the selected schematic project library table. This may result in "
"broken symbol library references.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"Det finns symbolbiblioteksnamn i det valda kretsschemat som saknas i den "
"valda projektbibliotekstabellen för kretsschemat. Detta kan resultera i "
"brutna symbolbibliotekslänkar.\n"
"\n"
"Vill du fortsätta?"
#: eeschema/sheet.cpp:423
msgid ""
"A duplicate library name that references a different library exists in the "
"current library table. This conflict cannot be resolved and may result in "
"broken symbol library references.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"Ett duplicerat biblioteksnamn som refererar till ett annat bibliotek finns i "
"den aktuella bibliotektabellen. Denna konflikt kan inte lösas och kan leda "
"till brutna symbolbibliotekslänkar.\n"
"\n"
"Vill du fortsätta?"
#: eeschema/sheet.cpp:634
#, c-format
msgid ""
"The file name '%s' can cause issues with an existing file name\n"
"already defined in the schematic on systems that support case\n"
"insensitive file names. This will cause issues if you copy this\n"
"project to an operating system that supports case insensitive file\n"
"names.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"Filnamnet '%s' kan orsaka problem med ett befintligt filnamn\n"
"som redan definierats i schemat för system som stöder\n"
"skiftlägesokänsliga filnamn. Detta kommer att orsaka problem \n"
"om du kopierar detta projekt till ett operativsystem som stöder \n"
"skiftlägesokänsliga filnamn.\n"
"\n"
"Vill du fortsätta?"
#: eeschema/sheet.cpp:643
msgid "Do not show this message again."
msgstr "Visa inte detta meddelande igen."
#: eeschema/sheet.cpp:644
msgid "Create New Sheet"
msgstr "Skapa nytt ark"
#: eeschema/sheet.cpp:645
msgid "Discard New Sheet"
msgstr "Kasta nytt ark"
#: eeschema/sim/kibis/ibis_parser.cpp:66 eeschema/sim/kibis/ibis_parser.cpp:95
#: eeschema/sim/kibis/ibis_parser.cpp:118
msgid "Dimension of matrices should be >= 1."
msgstr "Matrisernas dimension skall vara >= 1."
#: eeschema/sim/kibis/ibis_parser.cpp:72
msgid "Bandwidth of banded matrices should be >= 1."
msgstr "Bandbredd för bandmatriser skall vara >= 1."
#: eeschema/sim/kibis/ibis_parser.cpp:80 eeschema/sim/kibis/ibis_parser.cpp:103
#: eeschema/sim/kibis/ibis_parser.cpp:126
msgid "There are NaN elements in a matrix."
msgstr "Det finns element i en matris som är NaN."
#: eeschema/sim/kibis/ibis_parser.cpp:161
msgid "Invalid R_pkg value."
msgstr "Ogiltigt R_pkg-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:166
msgid "Invalid L_pkg value."
msgstr "Ogiltigt L_pkg-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:171
msgid "Invalid C_pkg value."
msgstr "Ogiltigt C_pkg-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:185
msgid "Checking pin "
msgstr "Kontrollerar stift "
#: eeschema/sim/kibis/ibis_parser.cpp:190
msgid "Pin name cannot be empty."
msgstr "Stiftnamnet kan inte utelämnas."
#: eeschema/sim/kibis/ibis_parser.cpp:195
msgid "Signal name cannot be empty."
msgstr "Signalnamn kan inte utelämnas."
#: eeschema/sim/kibis/ibis_parser.cpp:200
msgid "Model name cannot be empty."
msgstr "Modellnamnet kan inte utelämnas."
#: eeschema/sim/kibis/ibis_parser.cpp:205
msgid "Rpin is not valid."
msgstr "Rpin är inte giltigt."
#: eeschema/sim/kibis/ibis_parser.cpp:210
msgid "Lpin is not valid."
msgstr "Lpin är inte giltigt."
#: eeschema/sim/kibis/ibis_parser.cpp:215
msgid "Cpin is not valid."
msgstr "Cpin är inte giltigt."
#: eeschema/sim/kibis/ibis_parser.cpp:229
msgid "Component name cannot be empty."
msgstr "Komponentnamnet kan inte utelämnas."
#: eeschema/sim/kibis/ibis_parser.cpp:234
msgid "Checking component "
msgstr "Kontrollerar komponent "
#: eeschema/sim/kibis/ibis_parser.cpp:239
msgid "Component: manufacturer cannot be empty."
msgstr "Komponent: tillverkare kan inte utelämnas."
#: eeschema/sim/kibis/ibis_parser.cpp:245
msgid "Component: Invalid Package."
msgstr "Komponent: Ogiltig kapslingstyp."
#: eeschema/sim/kibis/ibis_parser.cpp:251
msgid "Component: no pin"
msgstr "Komponent: inget stift"
#: eeschema/sim/kibis/ibis_parser.cpp:348
msgid "Cannot interpolate the current based on this IV table."
msgstr "Kan inte interpolera strömmen baserat på denna IV-tabell."
#: eeschema/sim/kibis/ibis_parser.cpp:366
msgid "There is a Nan voltage in an IV table"
msgstr "Det finns ett spänningsvärde i en IV-tabell som är NaN (ej nummer)"
#: eeschema/sim/kibis/ibis_parser.cpp:373
msgid "There is an invalid current in an IV table"
msgstr "Det finns ett ogiltigt strömvärde i en IV-tabell"
#: eeschema/sim/kibis/ibis_parser.cpp:416
msgid "Invalid R_load."
msgstr "Ogiltigt R_load."
#: eeschema/sim/kibis/ibis_parser.cpp:420
msgid "Invalid falling dv/dt."
msgstr "Ogiltigt fallande dv/dt."
#: eeschema/sim/kibis/ibis_parser.cpp:425
msgid "Invalid rising dv/dt."
msgstr "Ogiltigt stigande dv/dt."
#: eeschema/sim/kibis/ibis_parser.cpp:440
msgid "Model name cannot be empty"
msgstr "Modellnamnet kan inte utelämnas"
#: eeschema/sim/kibis/ibis_parser.cpp:445
msgid "Checking model "
msgstr "Kontrollerar modell "
#: eeschema/sim/kibis/ibis_parser.cpp:450
msgid "Undefined model type"
msgstr "Odefinierad modelltyp"
#: eeschema/sim/kibis/ibis_parser.cpp:456
msgid "Invalid Vinh value."
msgstr "Ogiltigt Vinh-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:461
msgid "Invalid Vinl value."
msgstr "Ogiltigt Vinl-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:466
msgid "Invalid R_ref value."
msgstr "Ogiltigt R_ref-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:471
msgid "Invalid C_ref value."
msgstr "Ogiltigt C_ref-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:476
msgid "invalid V_ref value."
msgstr "Ogiltigt V_ref-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:481
msgid "Invalid V_meas value."
msgstr "Ogiltigt V_meas-värde."
#: eeschema/sim/kibis/ibis_parser.cpp:486
msgid "C_comp is invalid."
msgstr "C_comp är ogiltigt."
#: eeschema/sim/kibis/ibis_parser.cpp:491
msgid "Temperature Range is invalid."
msgstr "Temperaturområde är ogiltigt."
#: eeschema/sim/kibis/ibis_parser.cpp:516
msgid "Voltage Range is invalid."
msgstr "Spänningsintervall är ogiltigt."
#: eeschema/sim/kibis/ibis_parser.cpp:522
msgid "Invalid pulldown."
msgstr "Ogiltig pull-down."
#: eeschema/sim/kibis/ibis_parser.cpp:527
msgid "Invalid pullup."
msgstr "Ogiltig pull-up."
#: eeschema/sim/kibis/ibis_parser.cpp:532
msgid "Invalid POWER clamp."
msgstr "Ogiltig POWER clamp."
#: eeschema/sim/kibis/ibis_parser.cpp:537
msgid "Invalid GND clamp."
msgstr "Ogiltig GND clamp."
#: eeschema/sim/kibis/ibis_parser.cpp:546
msgid "Invalid Ramp"
msgstr "Ogiltig ramp"
#: eeschema/sim/kibis/ibis_parser.cpp:556
msgid "Checking Header..."
msgstr "Kontrollerar header..."
#: eeschema/sim/kibis/ibis_parser.cpp:560
msgid "Missing [IBIS Ver]"
msgstr "Saknad [IBIS Ver]"
#: eeschema/sim/kibis/ibis_parser.cpp:566
msgid "The parser does not handle this IBIS version"
msgstr "Tolken kan inte hanera denna IBIS-version"
#: eeschema/sim/kibis/ibis_parser.cpp:572
msgid "Missing [File Rev]"
msgstr "Saknad [File Rev]"
#: eeschema/sim/kibis/ibis_parser.cpp:578
msgid "Missing [File Name]"
msgstr "Saknat [File Name]"
#: eeschema/sim/kibis/ibis_parser.cpp:601
msgid "Package model name cannot be empty."
msgstr "Kapslingsmodellnamnet kan inte vara tomt."
#: eeschema/sim/kibis/ibis_parser.cpp:606
msgid "Checking package model "
msgstr "Kontrollerar kapslingsmodell "
#: eeschema/sim/kibis/ibis_parser.cpp:611
msgid "Manufacturer cannot be empty."
msgstr "Tillverkare kan inte utelämnas."
#: eeschema/sim/kibis/ibis_parser.cpp:617
msgid "OEM cannot be empty."
msgstr "OEM kan inte utelämnas."
#: eeschema/sim/kibis/ibis_parser.cpp:623
msgid "Negative number of pins."
msgstr "Negativt antal stift."
#: eeschema/sim/kibis/ibis_parser.cpp:637
msgid "Empty pin number"
msgstr "Tomt stiftnummer"
#: eeschema/sim/kibis/ibis_parser.cpp:645
msgid "Resistance matrix is incorrect"
msgstr "Resistansmatrisen är felaktig"
#: eeschema/sim/kibis/ibis_parser.cpp:653
msgid "Capacitance matrix is undefined"
msgstr "Kapacitansmatrisen är odefinierad"
#: eeschema/sim/kibis/ibis_parser.cpp:659
msgid "Capacitance matrix is incorrect"
msgstr "Kapacitansmatrisen är felaktig"
#: eeschema/sim/kibis/ibis_parser.cpp:665
msgid "Capacitance matrix is nullptr"
msgstr "Kapacitansmatrisen är nullptr"
#: eeschema/sim/kibis/ibis_parser.cpp:673
msgid "Inductance matrix is undefined"
msgstr "Induktansmatrisen är odefinierad"
#: eeschema/sim/kibis/ibis_parser.cpp:679
msgid "Inductance matrix is incorrect"
msgstr "Induktansmatrisen är felaktig"
#: eeschema/sim/kibis/ibis_parser.cpp:685
msgid "Inductance matrix is nullptr"
msgstr "Induktansmatrisen är nullptr"
#: eeschema/sim/kibis/ibis_parser.cpp:701
msgid "Cannot open file "
msgstr "Kan inte öppna filen "
#: eeschema/sim/kibis/ibis_parser.cpp:707
msgid "Reading file "
msgstr "Läser in fil "
#: eeschema/sim/kibis/ibis_parser.cpp:729
msgid "Unexpected end of file. Missing [END] ?"
msgstr "Oväntat slut på filen. Saknat [END] ?"
#: eeschema/sim/kibis/ibis_parser.cpp:741
msgid "Error on line "
msgstr "Fel på rad "
#: eeschema/sim/kibis/ibis_parser.cpp:769
msgid "A line did not end properly."
msgstr "En rad slutade inte korrekt."
#: eeschema/sim/kibis/ibis_parser.cpp:905
#: eeschema/sim/kibis/ibis_parser.cpp:922
msgid "Line exceeds maximum length."
msgstr "Raden överstiger maximal längd."
#: eeschema/sim/kibis/ibis_parser.cpp:948
msgid "Failed to read a double."
msgstr "Det gick inte att läsa en double."
#: eeschema/sim/kibis/ibis_parser.cpp:954
#: eeschema/sim/kibis/ibis_parser.cpp:998
msgid "Failed to read a word."
msgstr "Det gick inte att läsa ett ord."
#: eeschema/sim/kibis/ibis_parser.cpp:991
msgid "Number is not an integer"
msgstr "Numret är inte en integer"
#: eeschema/sim/kibis/ibis_parser.cpp:1035
msgid "Unable to read string, input is empty."
msgstr "Kunde inte läsa sträng, inmatningen är tom."
#: eeschema/sim/kibis/ibis_parser.cpp:1085
msgid "New comment character is invalid."
msgstr "Nytt kommentarstecken är ogiltigt."
#: eeschema/sim/kibis/ibis_parser.cpp:1098
msgid "Invalid syntax. Should be |_char or &_char, etc..."
msgstr "Felaktigt syntax. Skall vara |_char eller &_char, etc..."
#: eeschema/sim/kibis/ibis_parser.cpp:1109
msgid "No extra argument was expected"
msgstr "Inget extra argument förväntades"
#: eeschema/sim/kibis/ibis_parser.cpp:1261
msgid "Unknown keyword in "
msgstr "Okänt nyckelord i "
#: eeschema/sim/kibis/ibis_parser.cpp:1261
msgid " context: "
msgstr " kontext: "
#: eeschema/sim/kibis/ibis_parser.cpp:1327
msgid "Invalid ramp data"
msgstr "Ogiltigt rampdata"
#: eeschema/sim/kibis/ibis_parser.cpp:1411
msgid "Cannot specify a bandwidth for that kind of matrix"
msgstr "Kan inte specificera en bandbredd för den typen av matris"
#: eeschema/sim/kibis/ibis_parser.cpp:1430
msgid "Invalid row in matrix"
msgstr "Ogiltig rad i matris"
#: eeschema/sim/kibis/ibis_parser.cpp:1460
msgid "Too much data for this matrix row."
msgstr "För mycket data för denna matrisrad."
#: eeschema/sim/kibis/ibis_parser.cpp:1468
msgid "Too much data for this matrix."
msgstr "För mycket data för denna matris."
#: eeschema/sim/kibis/ibis_parser.cpp:1473
#: eeschema/sim/kibis/ibis_parser.cpp:1506
msgid "Can't read a matrix element"
msgstr "Kan inte läsa ett matriselement"
#: eeschema/sim/kibis/ibis_parser.cpp:1511
msgid "Can't read a matrix index"
msgstr "Kan inte läsa ett matrisindex"
#: eeschema/sim/kibis/ibis_parser.cpp:1579
msgid "Unknown matrix type"
msgstr "Okänd matristyp"
#: eeschema/sim/kibis/ibis_parser.cpp:1587
msgid "Missing matrix type"
msgstr "Saknad matristyp"
#: eeschema/sim/kibis/ibis_parser.cpp:1593
msgid " Matrix is already init. But m_continue was not set ( internal error )"
msgstr ""
" Matrisen är redan initialiserad, men m_continue blev inte satt ( internt "
"fel )"
#: eeschema/sim/kibis/ibis_parser.cpp:1619
msgid "Tried to read a row from an undefined matrix"
msgstr "Försökte läsa en rad från en odefinierad matris"
#: eeschema/sim/kibis/ibis_parser.cpp:1625
msgid "matrix pointer is null"
msgstr "matrispekare är null"
#: eeschema/sim/kibis/ibis_parser.cpp:1774
msgid "Typ-Min-Max Values requires at least Typ."
msgstr "Typ-Min-Max-värden kräver åtminstone Typ."
#: eeschema/sim/kibis/ibis_parser.cpp:1867
msgid "Unknown Model_type "
msgstr "Okänd Model_type "
#: eeschema/sim/kibis/ibis_parser.cpp:1874
msgid "Internal Error while reading model_type"
msgstr "Internt fel vid läsning av model_type"
#: eeschema/sim/kibis/ibis_parser.cpp:1889
msgid "Unknown Enable: "
msgstr "Okänt Enable: "
#: eeschema/sim/kibis/ibis_parser.cpp:1896
#: eeschema/sim/kibis/ibis_parser.cpp:1918
msgid "Internal Error while reading Enable"
msgstr "Internt fel vid läsning av Enable"
#: eeschema/sim/kibis/ibis_parser.cpp:1911
msgid "Unknown polarity "
msgstr "Okänd polaritet "
#: eeschema/sim/kibis/ibis_parser.cpp:1948
msgid "Continued reading a model that did not begin. ( internal error )"
msgstr "Fortsatte att läsa en modell som inte började. ( internt fel )"
#: eeschema/sim/kibis/ibis_parser.cpp:2115
msgid "A [Package] line requires exactly 4 elements."
msgstr "En [Paket] rad behöver exakt 4 element."
#: eeschema/sim/kibis/ibis_parser.cpp:2168
msgid "Invalid pin entry: 6 values from a table with only 3."
msgstr "Ogiltigt stiftfält: 6 värden från en tabell med endast 3."
#: eeschema/sim/kibis/ibis_parser.cpp:2178
msgid "Can't read a R, L or C value for a pin."
msgstr "Kan inte läsa ett R, L eller C-värde för ett stift."
#: eeschema/sim/kibis/ibis_parser.cpp:2201
msgid "Invalid field name in [Pin]"
msgstr "Ogiltigt fältnamn i [Pin]"
#: eeschema/sim/kibis/ibis_parser.cpp:2208
msgid "Missing argument in [Pin]"
msgstr "Saknat argument i [Pin]"
#: eeschema/sim/kibis/ibis_parser.cpp:2243
msgid "Wrong number of columns for pin mapping."
msgstr "Fel antal kolumner för stiftmappning."
#: eeschema/sim/kibis/ibis_parser.cpp:2283
msgid "Incorrect diff pin name"
msgstr "Felaktigt differentialstiftnamn"
#: eeschema/sim/kibis/ibis_parser.cpp:2288
msgid "Incorrect inv_pin name"
msgstr "Felaktigt inv_pin namn"
#: eeschema/sim/kibis/ibis_parser.cpp:2368
msgid "Unknown waveform type"
msgstr "Okänd vågformstyp"
#: eeschema/sim/kibis/ibis_parser.cpp:2379
msgid "Internal error detected, a waveform should exist"
msgstr "Internt fel detekterat, en vågform borde existera"
#: eeschema/sim/kibis/ibis_parser.cpp:2444
msgid "Internal error: Bad parser context."
msgstr "Internt fel: Felaktigt tolk-kontext."
#: eeschema/sim/kibis/ibis_parser.cpp:2481
msgid "Missing keyword."
msgstr "Saknat nyckelord."
#: eeschema/sim/kibis/kibis.cpp:454
msgid "waveform has less than two points"
msgstr "vågform nar mindre än två punkter"
#: eeschema/sim/kibis/kibis.cpp:675 eeschema/sim/kibis/kibis.cpp:740
msgid "Cannot remove temporary output file"
msgstr "Kan inte ta bort temporär utmatningsfil"
#: eeschema/sim/kibis/kibis.cpp:726
msgid "Error while reading temporary file"
msgstr "Fel vid läsning av temporär fil"
#: eeschema/sim/kibis/kibis.cpp:735
msgid "Error while creating temporary output file"
msgstr "Det gick inte att skapa temporär utmatningsfil"
#: eeschema/sim/kibis/kibis.cpp:774
msgid ""
"Kibis does not support DUT values yet. https://ibis.org/summits/nov16a/chen."
"pdf"
msgstr ""
"Kibis stöder inte ännu DUT-värden. https://ibis.org/summits/nov16a/chen.pdf"
#: eeschema/sim/kibis/kibis.cpp:877
msgid "Model has only one waveform pair, reduced accuracy"
msgstr "Modellen har endast ett vågformspar, reducerad noggrannhet"
#: eeschema/sim/kibis/kibis.cpp:897 eeschema/sim/kibis/kibis.cpp:1102
msgid "Driver needs at least a pullup or a pulldown"
msgstr "Utgången kräver åtminstone en pull-up eller en pull-down"
#: eeschema/sim/kibis/kibis.cpp:1085 eeschema/sim/kibis/kibis.cpp:1094
msgid ""
"There are two waveform pairs, but only one transistor. More equations than "
"unknowns."
msgstr ""
"Det finns två vågformspar, men endast en transistor. Fler ekvationer än "
"okända."
#: eeschema/sim/kibis/kibis.cpp:1202
msgid "Model has no waveform pair, using [Ramp] instead, poor accuracy"
msgstr ""
"Modellen saknar vågformspar, använder [Ramp] istället, dålig noggrannhet"
#: eeschema/sim/kibis/kibis.cpp:1215
msgid "Model has more than 2 waveform pairs, using the first two."
msgstr "Modellen har fler än 2 vågformspar, använder de två första."
#: eeschema/sim/kibis/kibis.cpp:1253
msgid "Invalid model type for a driver."
msgstr "Ogiltig modelltyp för en drivutgång."
#: eeschema/sim/kibis/kibis.cpp:1305
msgid "Invalid model type for a device"
msgstr "Ogiltig modelltyp för en komponent"
#: eeschema/sim/kibis/kibis.cpp:1525 eeschema/sim/kibis/kibis.cpp:1571
msgid "Number of cycles should be greater than 0."
msgstr "Antalet cykler skall vara större än 0."
#: eeschema/sim/kibis/kibis.cpp:1531 eeschema/sim/kibis/kibis.cpp:1577
msgid "ON time should be greater than 0."
msgstr "TILL-tid skall vara större än 0."
#: eeschema/sim/kibis/kibis.cpp:1537 eeschema/sim/kibis/kibis.cpp:1583
msgid "OFF time should be greater than 0."
msgstr "FRÅN-tid skall vara större än 0."
#: eeschema/sim/kibis/kibis.cpp:1545
msgid "Rising edge is longer than on time."
msgstr "Stigtiden är längre än till-tiden."
#: eeschema/sim/kibis/kibis.cpp:1554
msgid "Falling edge is longer than off time."
msgstr "Falltiden är längre än från-tiden."
#: eeschema/sim/kibis/kibis.cpp:1591
msgid "Rising edge is longer than ON time."
msgstr "Stigtiden är längre än TILL-tiden."
#: eeschema/sim/kibis/kibis.cpp:1599
msgid "Falling edge is longer than OFF time."
msgstr "Falltiden är längre än FRÅN-tiden."
#: eeschema/sim/kibis/kibis.cpp:1613 eeschema/sim/kibis/kibis.cpp:1644
msgid "Bitrate should be greater than 0."
msgstr "Bithastigheten skall vara större än 0."
#: eeschema/sim/kibis/kibis.cpp:1619 eeschema/sim/kibis/kibis.cpp:1650
msgid "Number of bits should be greater than 0."
msgstr "Antalet bitar skall vara större än 0."
#: eeschema/sim/kibis/kibis.cpp:1631
msgid "Bitrate is too high for rising / falling edges"
msgstr "Bithastigheten är för hög för stigande / fallande flanker"
#: eeschema/sim/kibis/kibis.cpp:1658
msgid "Bitrate could be too high for rising / falling edges"
msgstr "Bithastigheten kan vara för hög för stigande / fallande flanker"
#: eeschema/sim/sim_lib_mgr.cpp:73
#, c-format
msgid "Simulation model library not found at '%s' or '%s'"
msgstr "Simulationsmodellbibliotek hittades inte på '%s' eller '%s'"
#: eeschema/sim/sim_lib_mgr.cpp:287
#, c-format
msgid "Error loading simulation model library '%s': %s"
msgstr "Fel vid inläsning av simulationsmodellbibliotek '%s': %s"
#: eeschema/sim/sim_lib_mgr.cpp:294
#, c-format
msgid "Error loading simulation model: no '%s' field"
msgstr "Fel vid inläsning av simulationsmodell: inget '%s'-fält"
#: eeschema/sim/sim_lib_mgr.cpp:302
#, c-format
msgid ""
"Error loading simulation model: could not find base model '%s' in library "
"'%s'"
msgstr ""
"Fel vid inläsning av simulationsmodell: kunde inte hitta grundmodell '%s' i "
"biblioteket '%s'"
#: eeschema/sim/sim_model.cpp:724
#, c-format
msgid "Could not find a pin named '%s' in simulation model of type '%s'"
msgstr "Kunde inte hitta stift med namn '%s' i simulationsmodell av typ '%s'"
#: eeschema/sim/sim_model.cpp:814
#, c-format
msgid "Could not find a parameter named '%s' in simulation model of type '%s'"
msgstr ""
"Kunde inte hitta parameter med namn '%s' i simulationsmodell av typ '%s'"
#: eeschema/sim/sim_model.h:465
#, c-format
msgid ""
"Simulation model type must be the same as of its base class: '%s', but is "
"'%s'"
msgstr ""
"Simulationsmodellens typ måste vara samma som dess grundklass: '%s', men är "
"'%s'"
#: eeschema/sim/sim_model_kibis.cpp:76
#, c-format
msgid "Invalid IBIS file '%s'"
msgstr "Ogiltig IBIS-fil '%s'"
#: eeschema/sim/sim_model_kibis.cpp:81
#, c-format
msgid "Could not find IBIS component '%s'"
msgstr "Kunde inte hitta IBIS-komponent '%s'"
#: eeschema/sim/sim_model_kibis.cpp:87
#, c-format
msgid "Invalid IBIS component '%s'"
msgstr "Ogiltig IBIS-komponent '%s'"
#: eeschema/sim/sim_model_kibis.cpp:91
#, c-format
msgid "Could not find IBIS pin '%s' in component '%s'"
msgstr "Kunde inte hitta IBIS-stift '%s' i komponent '%s'"
#: eeschema/sim/sim_model_kibis.cpp:98
#, c-format
msgid "Invalid IBIS pin '%s' in component '%s'"
msgstr "Ogiltigt IBIS-stift '%s' i komponent '%s'"
#: eeschema/sim/sim_model_kibis.cpp:106
#, c-format
msgid "Could not find IBIS model '%s'"
msgstr "Kunde inte hitta IBIS-modell '%s'"
#: eeschema/sim/sim_model_kibis.cpp:109
#, c-format
msgid "Invalid IBIS model '%s'"
msgstr "Ogiltig IBIS-modell '%s'"
#: eeschema/sim/sim_model_kibis.cpp:340
msgid "Power supply"
msgstr "Strömförsörjning"
#: eeschema/sim/sim_model_kibis.cpp:350
msgid "Parasitic pin resistance"
msgstr "Stiftets parasitiska resistans"
#: eeschema/sim/sim_model_kibis.cpp:360
msgid "Parasitic pin inductance"
msgstr "Stiftets parasitiska induktans"
#: eeschema/sim/sim_model_kibis.cpp:370
msgid "Parasitic pin capacitance"
msgstr "Stiftets parasitiska kapacitans"
#: eeschema/sim/sim_model_kibis.cpp:414
msgid "DC Value"
msgstr "DC-värde"
#: eeschema/sim/sim_model_kibis.cpp:432
msgid "ON time"
msgstr "TILL-tid"
#: eeschema/sim/sim_model_kibis.cpp:440
msgid "OFF time"
msgstr "FRÅN-tid"
#: eeschema/sim/sim_model_kibis.cpp:448 eeschema/sim/sim_model_kibis.cpp:481
msgid "Delay"
msgstr "Fördröjning"
#: eeschema/sim/sim_model_kibis.cpp:456
msgid "Number of cycles"
msgstr "Antal cykler"
#: eeschema/sim/sim_model_kibis.cpp:473
msgid "Bitrate"
msgstr "Bithastighet"
#: eeschema/sim/sim_model_kibis.cpp:489
msgid "Number of bits"
msgstr "Antal bitar"
#: eeschema/sim/sim_panel_base.cpp:92
#, fuzzy
msgid ""
"Simulation provided no plots. Please refer to console window for results."
msgstr "Denna simulering ger inga diagram. Se konsolfönstret för resultat"
#: eeschema/sim/sim_plot_frame.cpp:159
msgid "Run/Stop Simulation"
msgstr "Kör / stoppa simulering"
#: eeschema/sim/sim_plot_frame.cpp:160 eeschema/sim/sim_plot_frame_base.cpp:55
msgid "Run Simulation"
msgstr "Kör simulering"
#: eeschema/sim/sim_plot_frame.cpp:162
msgid "Add signals to plot"
msgstr "Lägg till signaler för att plotta"
#: eeschema/sim/sim_plot_frame.cpp:163
msgid "Probe"
msgstr "Sond"
#: eeschema/sim/sim_plot_frame.cpp:164
msgid "Probe signals on the schematic"
msgstr "Probsignaler på schemat"
#: eeschema/sim/sim_plot_frame.cpp:165 eeschema/sim/sim_plot_frame_base.cpp:242
msgid "Tune"
msgstr "Ställa in"
#: eeschema/sim/sim_plot_frame.cpp:166
msgid "Tune component values"
msgstr "Ställ in komponentvärden"
#: eeschema/sim/sim_plot_frame.cpp:167
msgid "Sim Command"
msgstr "Simulationskommando"
#: eeschema/sim/sim_plot_frame.cpp:168
msgid "Simulation command and settings"
msgstr "Simuleringskommando och -inställningar"
#: eeschema/sim/sim_plot_frame.cpp:351 eeschema/sim/sim_plot_frame_base.h:129
msgid "Spice Simulator"
msgstr "Spice-simulator"
#: eeschema/sim/sim_plot_frame.cpp:471 eeschema/sim/sim_plot_frame.cpp:1491
msgid ""
"Errors during netlist generation; simulation aborted.\n"
"\n"
msgstr ""
"Det uppstod fel vid generering av nätlista; simulationen avbröts.\n"
"\n"
#: eeschema/sim/sim_plot_frame.cpp:488
msgid ""
"Schematic sheet simulation command directive has changed. Do you wish to "
"update the Simulation Command?"
msgstr ""
"Kretsschemaarkets simulationskommandodirektiv har ändrats. Vill du "
"uppdatera simulationskommandot?"
#: eeschema/sim/sim_plot_frame.cpp:511 eeschema/sim/sim_plot_frame.cpp:1904
msgid "Another simulation is already running."
msgstr "En annan simulation körs redan."
#: eeschema/sim/sim_plot_frame.cpp:539
#, c-format
msgid "Plot%u - "
msgstr "Plotta%u - "
#: eeschema/sim/sim_plot_frame.cpp:603 eeschema/sim/sim_plot_frame.cpp:615
#: eeschema/sim/sim_plot_frame.cpp:940
msgid "Could not apply tuned value(s):"
msgstr ""
#: eeschema/sim/sim_plot_frame.cpp:616 eeschema/sim/sim_plot_frame.cpp:930
#, fuzzy, c-format
msgid "%s is not tunable"
msgstr "Katalogen \"%s\" är inte skrivbar."
#: eeschema/sim/sim_plot_frame.cpp:659
msgid "Error: simulation type not defined!\n"
msgstr "Fel: simuleringstyp har inte definierats!\n"
#: eeschema/sim/sim_plot_frame.cpp:665
msgid "Error: simulation type doesn't support plotting!\n"
msgstr "Fel: simuleringstyp stöder inte plottning!\n"
#: eeschema/sim/sim_plot_frame.cpp:737
msgid " (mag)"
msgstr " (magnitud)"
#: eeschema/sim/sim_plot_frame.cpp:739
msgid " (phase)"
msgstr " (fas)"
#: eeschema/sim/sim_plot_frame.cpp:851 eeschema/sim/sim_plot_frame.cpp:1722
msgid "Signal"
msgstr "Signal"
#: eeschema/sim/sim_plot_frame.cpp:1125
msgid "noname"
msgstr "namnlös"
#: eeschema/sim/sim_plot_frame.cpp:1174
msgid "Open simulation workbook"
msgstr "Öppna simuleringsarbetsbok"
#: eeschema/sim/sim_plot_frame.cpp:1203
msgid "Save Simulation Workbook As"
msgstr "Spara simuleringsarbetsbok som"
#: eeschema/sim/sim_plot_frame.cpp:1219
msgid "Save Plot as Image"
msgstr "Spara plot som bild"
#: eeschema/sim/sim_plot_frame.cpp:1236
msgid "Save Plot Data"
msgstr "Spara plotdata"
#: eeschema/sim/sim_plot_frame.cpp:1546
msgid "You need to run plot-providing simulation first."
msgstr "Du måste köra plot-tillhandahållande simulering först."
#: eeschema/sim/sim_plot_frame.cpp:1605
#, fuzzy
msgid "SPICE Netlist"
msgstr "SPICE netlist-fil"
#: eeschema/sim/sim_plot_frame.cpp:1672
msgid "Save changes to workbook?"
msgstr "Spara ändringar till arbetsboken?"
#: eeschema/sim/sim_plot_frame.cpp:1834
msgid ""
"\n"
"\n"
"Simulation results:\n"
"\n"
msgstr ""
"\n"
"\n"
"Simuleringsresultat:\n"
"\n"
#: eeschema/sim/sim_plot_frame.cpp:1925
#, fuzzy
msgid "Remove Signal"
msgstr "Dölj signal"
#: eeschema/sim/sim_plot_frame.cpp:1925
#, fuzzy
msgid "Remove the signal from the plot"
msgstr "Radera signalen från plot-skärmen"
#: eeschema/sim/sim_plot_frame.cpp:1933
msgid "Hide Cursor"
msgstr "Dölj markören"
#: eeschema/sim/sim_plot_frame.cpp:1935
msgid "Show Cursor"
msgstr "Visa markören"
#: eeschema/sim/sim_plot_frame_base.cpp:19
msgid "New Plot"
msgstr "Ny plot"
#: eeschema/sim/sim_plot_frame_base.cpp:25
msgid "Open Workbook..."
msgstr "Öppna arbetsbok..."
#: eeschema/sim/sim_plot_frame_base.cpp:29
msgid "Save Workbook"
msgstr "Spara arbetsbok"
#: eeschema/sim/sim_plot_frame_base.cpp:33
msgid "Save Workbook As..."
msgstr "Spara arbetsbok som..."
#: eeschema/sim/sim_plot_frame_base.cpp:39
msgid "Export Current Plot as PNG..."
msgstr "Exportera aktuell plott som PNG..."
#: eeschema/sim/sim_plot_frame_base.cpp:43
msgid "Export Current Plot as CSV..."
msgstr "Exportera aktuell plott som CSV..."
#: eeschema/sim/sim_plot_frame_base.cpp:52
msgid "File"
msgstr "Fil"
#: eeschema/sim/sim_plot_frame_base.cpp:61
msgid "Add Signals..."
msgstr "Lägg till signaler ..."
#: eeschema/sim/sim_plot_frame_base.cpp:65
msgid "Probe from schematics"
msgstr "Sond från scheman"
#: eeschema/sim/sim_plot_frame_base.cpp:69
msgid "Tune Component Value"
msgstr "Ställa in komponentvärde"
#: eeschema/sim/sim_plot_frame_base.cpp:75
msgid "Show SPICE Netlist..."
msgstr "Visa SPICE-nätlista..."
#: eeschema/sim/sim_plot_frame_base.cpp:75
msgid "Shows current simulation's netlist. Useful for debugging SPICE errors."
msgstr ""
"Visar aktuell simulerings netlista. Användbar för felsökning av SPICE-fel."
#: eeschema/sim/sim_plot_frame_base.cpp:80
msgid "Settings..."
msgstr "Inställningar..."
#: eeschema/sim/sim_plot_frame_base.cpp:83
msgid "Simulation"
msgstr "Simulering"
#: eeschema/sim/sim_plot_frame_base.cpp:101
msgid "Show &Grid"
msgstr "Visa stö&drutor"
#: eeschema/sim/sim_plot_frame_base.cpp:105
msgid "Show &Legend"
msgstr "Show & Legend"
#: eeschema/sim/sim_plot_frame_base.cpp:111
msgid "Dotted Current/Phase"
msgstr "Prickad ström / fas"
#: eeschema/sim/sim_plot_frame_base.cpp:115
msgid "White Background"
msgstr "Vit bakgrund"
#: eeschema/sim/sim_plot_frame_base.cpp:118
msgid "View"
msgstr "Visa"
#: eeschema/sim/sim_plot_frame_base.cpp:197
msgid "Signals"
msgstr "Signaler"
#: eeschema/sim/sim_plot_frame_base.cpp:225
msgid "Cursors"
msgstr "Markörer"
#: eeschema/sim/sim_plot_panel.cpp:351 eeschema/sim/sim_plot_panel.cpp:362
#: pcb_calculator/transline_ident.cpp:108
msgid "Frequency"
msgstr "Frekvens"
#: eeschema/sim/sim_plot_panel.cpp:352
msgid "Gain"
msgstr "Förstärkning"
#: eeschema/sim/sim_plot_panel.cpp:353
msgid "Phase"
msgstr "Fas"
#: eeschema/sim/sim_plot_panel.cpp:363
msgid "noise [(V or A)^2/Hz]"
msgstr "brus [(V eller A) ^ 2 / Hz]"
#: eeschema/sim/sim_plot_panel.cpp:367
msgid "Time"
msgstr "Tid"
#: eeschema/sim/sim_plot_panel.cpp:368
msgid "Voltage"
msgstr "Spänning"
#: eeschema/sim/sim_plot_panel.cpp:369 eeschema/sim/sim_plot_panel.cpp:442
msgid "Current"
msgstr "Nuvarande"
#: eeschema/sim/sim_plot_panel.cpp:424
msgid "Voltage (swept)"
msgstr "Spänning (svept)"
#: eeschema/sim/sim_plot_panel.cpp:428
msgid "Current (swept)"
msgstr "Ström (svept)"
#: eeschema/sim/sim_plot_panel.cpp:432
msgid "Resistance (swept)"
msgstr "Motstånd (svept)"
#: eeschema/sim/sim_plot_panel.cpp:436
msgid "Temperature (swept)"
msgstr "Temperatur (svept)"
#: eeschema/sim/sim_plot_panel.cpp:441
msgid "Voltage (measured)"
msgstr "Spänning (uppmätt)"
#: eeschema/sim/sim_value.cpp:386
msgid "Unknown SIM_VALUE type"
msgstr "Okänd SIM_VALUE typ"
#: eeschema/sim/spice_model_parser.cpp:84
#: eeschema/sim/spice_model_parser.cpp:186
#, c-format
msgid "Could not find model '%s' to copy for \"A Kind Of\" model '%s'"
msgstr "Kunde inte hitta modell '%s' att kopiera till \"en slags\" modell '%s'"
#: eeschema/sim/spice_simulator.cpp:63
msgid "DC Sweep"
msgstr "DC-svep"
#: eeschema/sim/spice_simulator.cpp:75
msgid "Pole-zero"
msgstr "Pol-nollställe"
#: eeschema/sim/spice_simulator.cpp:81
msgid "Transfer function"
msgstr "Överföringsfunktion"
#: eeschema/sim/spice_simulator.cpp:85
msgid "UNKNOWN!"
msgstr "OKÄND!"
#: eeschema/sim/spice_value.cpp:42
msgid "Spice value cannot be empty"
msgstr "Spice-värdet kan inte vara tomt"
#: eeschema/sim/spice_value.cpp:47
msgid "Invalid Spice value string"
msgstr "Ogiltig Spice-värdesträng"
#: eeschema/sim/spice_value.cpp:80
msgid "Invalid unit prefix"
msgstr "Ogiltigt enhetsprefix"
#: eeschema/sim/spice_value.cpp:259
msgid "Please, fill required fields"
msgstr "Vänligen fyll i obligatoriska fält"
#: eeschema/sim/spice_value.cpp:277
#, c-format
msgid "'%s' is not a valid Spice value."
msgstr "'%s' är inte ett giltigt Spice-värde."
#: eeschema/symbol_async_loader.cpp:108
#, c-format
msgid "Loading library %s..."
msgstr "Laddar bibliotek %s..."
#: eeschema/symbol_async_loader.cpp:122
#, c-format
msgid ""
"Error loading symbol library %s.\n"
"\n"
"%s\n"
msgstr ""
"Fel vid inläsning av symbolbibliotek %s.\n"
"\n"
"%s\n"
#: eeschema/symbol_checker.cpp:61
#, c-format
msgid ""
"<b>Warning: reference prefix</b><br>prefix ending by '%s' can create issues "
"if saved in a symbol library"
msgstr ""
"<b>Varning: referensprefix</b><br>prefix som slutar med '%s' kan orsaka "
"problem om de sparas i ett symbolbibliotek"
#: eeschema/symbol_checker.cpp:113
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%.3f, %.3f)</b> conflicts with "
"pin %s%s at location <b>(%.3f, %.3f)</b> of converted."
msgstr ""
"<b> Dubbelt stift %s</b> %s på plats <b> (%.3f, %.3f) </b> strider mot stift "
"%s%s på plats <b> ( %.3f, %.3f) </b> av konverterad."
#: eeschema/symbol_checker.cpp:127
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%.3f, %.3f)</b> conflicts with "
"pin %s%s at location <b>(%.3f, %.3f)</b> in units %s and %s of converted."
msgstr ""
"<b> Dubblettstift %s </b> %s på plats <b> (%.3f, %.3f) </b> är i konflikt "
"med stift %s%s på plats <b> ( %.3f, %.3f) </b> i enheter %s och %s av "
"konverterad."
#: eeschema/symbol_checker.cpp:146
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
"%s%s at location <b>(%s, %s)</b>."
msgstr ""
"<b>Dublettstift %s</b> %s\" på plats <b>(%s, %s)</b> strider mot stift %s%s "
"på plats <b> ( %s, %s)</b>."
#: eeschema/symbol_checker.cpp:159
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
"%s%s at location <b>(%s, %s)</b> in units %s and %s."
msgstr ""
"<b>Dubblettstift %s</b> %s\" på plats <b>(%s, %s)</b> är i konflikt med "
"stift %s%s på plats <b> ( %s, %s)</b> i enheter %s och %s."
#: eeschema/symbol_checker.cpp:187
msgid "<b>A Power Symbol should have only one unit</b><br><br>"
msgstr ""
"<b>En strömförsörjningssymbol skall ha en och endast en enhet</b><br><br>"
#: eeschema/symbol_checker.cpp:193
msgid "<b>A Power Symbol should have no convert option</b><br><br>"
msgstr ""
"<b>En strömförsörjningssymbol skall inte ha optionen \"konvertera\"</"
"b><br><br>"
#: eeschema/symbol_checker.cpp:199
msgid "<b>A Power Symbol should have only one pin</b><br><br>"
msgstr "<b>En strömförsörjningssymbol skall ha endast ett stift</b><br><br>"
#: eeschema/symbol_checker.cpp:208
msgid ""
"<b>Suspicious Power Symbol</b><br>Only a input or output power pin has "
"meaning<br><br>"
msgstr ""
"<b>Tvivelaktig strömförsörjningssymbol</b><br>Endast ingång eller utgång är "
"meningsfullt för ett strömförsörjningsstift<br><br>"
#: eeschema/symbol_checker.cpp:215
msgid ""
"<b>Suspicious Power Symbol</b><br>Only invisible input power pins are "
"automatically connected<br><br>"
msgstr ""
"<b>Tvivelaktig strömförsörjningssymbol</b><br>Endast gömda "
"strömförsörjningsstift av ingångstyp ansluts automatiskt<br><br>"
#: eeschema/symbol_checker.cpp:240
#, c-format
msgid ""
"Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b> of converted."
msgstr ""
"Info: <b>Gömt strömförsörjningsstift %s</b> %s på plats <b>(%s, %s)</b> av "
"konverterad."
#: eeschema/symbol_checker.cpp:249
#, c-format
msgid ""
"Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b> in unit %c "
"of converted."
msgstr ""
"Info: <b>Gömt strömförsörjningsstift %s</b> %s på plats <b>(%s, %s)</b> i "
"enhet %c av konverterad."
#: eeschema/symbol_checker.cpp:262
#, c-format
msgid "Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b>."
msgstr ""
"Info: <b>Gömt strömförsörjningsstift %s</b> %s på plats <b>(%s, %s)</b>."
#: eeschema/symbol_checker.cpp:270
#, c-format
msgid ""
"Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b> in unit %c."
msgstr ""
"Info: <b>Gömt strömförsörjningsstift %s</b> %s på plats <b>(%s, %s)</b> i "
"enhet %c."
#: eeschema/symbol_checker.cpp:281
msgid ""
"(Hidden power pins will drive their pin names on to any connected nets.)"
msgstr ""
"(Dolda strömförsörjningsstift kommer att tilldela sina stiftnamn till alla "
"anslutna nät.)"
#: eeschema/symbol_checker.cpp:294
#, c-format
msgid "<b>Off grid pin %s</b> %s at location <b>(%s, %s)</b> of converted."
msgstr ""
"<b>Stift %s utanför rutnät </b> %s på plats <b> (%s, %s) </b> av konverterad."
#: eeschema/symbol_checker.cpp:303
#, c-format
msgid ""
"<b>Off grid pin %s</b> %s at location <b>(%.3s, %.3s)</b> in unit %c of "
"converted."
msgstr ""
"<b> Stift %s utanför rutnät</b> %s på plats <b> (%.3s, %.3s) </b> i symbol "
"%c av konverterad."
#: eeschema/symbol_checker.cpp:316
#, c-format
msgid "<b>Off grid pin %s</b> %s at location <b>(%s, %s)</b>."
msgstr "<b> Stift %s utanför rutnät</b> %s på plats <b> (%s, %s) </b>."
#: eeschema/symbol_checker.cpp:324
#, c-format
msgid "<b>Off grid pin %s</b> %s at location <b>(%s, %s)</b> in unit %c."
msgstr ""
"<b> Stift %s utanför rutnät </b> %s på plats <b> (%s, %s) </b> i symbol %c."
#: eeschema/symbol_editor/lib_logger.cpp:64
msgid ""
"Not all symbol libraries could be loaded. Use the Manage Symbol\n"
"Libraries dialog to adjust paths and add or remove libraries."
msgstr ""
"Inte alla symbolbibliotek kunde laddas. Använd dialogrutan Hantera "
"symbolbibliotek\n"
"för att justera sökvägar och lägga till eller ta bort bibliotek."
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:70
msgid "Symbol..."
msgstr "Symbol..."
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:71
msgid "View as PNG..."
msgstr "Aktuell vy som PNG..."
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:72
msgid "Symbol as SVG..."
msgstr "Symbol som SVG..."
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:79
#: eeschema/symbol_editor/symbol_edit_frame.cpp:100
msgid "Library Editor"
msgstr "Biblioteksredigerare"
#: eeschema/symbol_editor/symbol_edit_frame.cpp:114
msgid "KiCad Symbol Editor"
msgstr "KiCad Symbolredigerare"
#: eeschema/symbol_editor/symbol_edit_frame.cpp:137
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1025
#: eeschema/symbol_library.cpp:475 eeschema/symbol_tree_model_adapter.cpp:71
msgid "Loading Symbol Libraries"
msgstr "Laddar symbolbibliotek"
#: eeschema/symbol_editor/symbol_edit_frame.cpp:191
#: pcbnew/footprint_edit_frame.cpp:218 pcbnew/footprint_edit_frame.cpp:830
msgid "Libraries"
msgstr "Bibliotek"
#: eeschema/symbol_editor/symbol_edit_frame.cpp:247
msgid "Library changes are unsaved"
msgstr "Biblioteksändringar sparas inte"
#: eeschema/symbol_editor/symbol_edit_frame.cpp:258
msgid "Symbol library loading was cancelled by user."
msgstr "Inläsning av symbolbibliotek avbröts av användaren."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:771
#, c-format
msgid ""
"Editing symbol %s from schematic. Saving will update the schematic only."
msgstr ""
"Redigerar symbol %s från kretsschemat. Att spara uppdaterar endast "
"kretsschemat."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:780
msgid "Manage symbol libraries"
msgstr "Hantera symbolbibliotek"
#: eeschema/symbol_editor/symbol_edit_frame.cpp:791
msgid ""
"Symbols in legacy libraries are not editable. Use Manage Symbol Libraries "
"to migrate to current format."
msgstr ""
"Symboler i äldre bibliotek kan inte redigeras. Använd Manage Symbol "
"Libraries för att migrera till aktuellt format."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:801
#, c-format
msgid "Symbol %s is derived from %s. Symbol graphics will not be editable."
msgstr "Symbol %s härrör från %s. Symbolgrafik kan inte redigeras."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:881
#: eeschema/symbol_editor/symbol_edit_frame.cpp:932
#: eeschema/tools/sch_editor_control.cpp:790
#, c-format
msgid "Library '%s' already exists."
msgstr "Biblioteket '%s' finns redan."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:889
#, c-format
msgid ""
"Could not create the library file '%s'.\n"
"Make sure you have write permissions and try again."
msgstr ""
"Det gick inte att skapa biblioteksfilen '%s'.\n"
"Kontrollera skrivbehörighet och försök igen."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:900
#: eeschema/symbol_editor/symbol_edit_frame.cpp:938
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:213
msgid "Could not open the library file."
msgstr "Det gick inte att öppna biblioteksfilen."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1031
#, c-format
msgid "Loading library '%s'..."
msgstr "Laddar bibliotek '%s'..."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1125
#, c-format
msgid "Failed to save backup to '%s'."
msgstr "Det gick inte att spara backup till '%s'."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1296
#: eeschema/symbol_viewer_frame.cpp:478
#, c-format
msgid ""
"The current configuration does not include the library '%s'.\n"
"Use Manage Symbol Libraries to edit the configuration."
msgstr ""
"Den aktuella konfigurationen inkluderar inte biblioteket '%s'.\n"
"Använd Manage Symbol Libraries för att redigera konfigurationen."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1299
#: eeschema/symbol_viewer_frame.cpp:481
msgid "Library not found in symbol library table."
msgstr "Biblioteket hittades inte i symbolbibliotektabellen."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1307
#: eeschema/symbol_viewer_frame.cpp:485
#, c-format
msgid ""
"The library '%s' is not enabled in the current configuration.\n"
"Use Manage Symbol Libraries to edit the configuration."
msgstr ""
"Biblioteket '%s' är inte aktiverat i den aktuella konfigurationen.\n"
"Använd Manage Symbol Libraries för att redigera konfigurationen."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1310
#: eeschema/symbol_viewer_frame.cpp:488
msgid "Symbol library not enabled."
msgstr "Symbolbiblioteket är inte aktiverat."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1500
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1552
msgid "Error saving global library table."
msgstr "Fel vid sparande av global bibliotekstabell."
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1501
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1553
msgid "Error saving project library table."
msgstr "Fel vid sparande av projektspecifik bibliotektabell."
#: eeschema/symbol_editor/symbol_editor.cpp:69
msgid "[from schematic]"
msgstr "[från schema]"
#: eeschema/symbol_editor/symbol_editor.cpp:79
msgid "[Read Only Library]"
msgstr "[Skrivskyddat bibliotek]"
#: eeschema/symbol_editor/symbol_editor.cpp:83
msgid "[no symbol loaded]"
msgstr "[ingen symbol laddad]"
#: eeschema/symbol_editor/symbol_editor.cpp:115
#: eeschema/symbol_editor/symbol_editor.cpp:448
#: eeschema/tools/symbol_editor_control.cpp:651
msgid "No schematic currently open."
msgstr "Inget schema är för närvarande öppet."
#: eeschema/symbol_editor/symbol_editor.cpp:155
#: eeschema/symbol_editor/symbol_editor.cpp:972
msgid "The current symbol has been modified. Save changes?"
msgstr "Den aktuella symbolen har ändrats. Spara ändringar?"
#: eeschema/symbol_editor/symbol_editor.cpp:324
msgid "This new symbol has no name and cannot be created."
msgstr "Denna nya symbol har inget namn och kan inte skapas."
#: eeschema/symbol_editor/symbol_editor.cpp:336
#, c-format
msgid "Symbol '%s' already exists in library '%s'."
msgstr "Symbol '%s' finns redan i bibliotek '%s'."
#: eeschema/symbol_editor/symbol_editor.cpp:341
#: eeschema/symbol_editor/symbol_editor.cpp:656
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:101
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:164
#: kicad/tools/kicad_manager_control.cpp:268
#: pcbnew/dialogs/dialog_export_idf.cpp:163
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:122
#: pcbnew/footprint_libraries_utils.cpp:478
#: pcbnew/footprint_libraries_utils.cpp:1177
msgid "Overwrite"
msgstr "Skriv över"
#: eeschema/symbol_editor/symbol_editor.cpp:468
#: eeschema/symbol_editor/symbol_editor.cpp:1175
#: eeschema/tools/symbol_editor_control.cpp:187
#: eeschema/tools/symbol_editor_control.cpp:259
#: eeschema/tools/symbol_editor_control.cpp:301
#, c-format
msgid "Symbol library '%s' is not writable."
msgstr "Kan inte skriva till symbolbibliotek '%s'."
#: eeschema/symbol_editor/symbol_editor.cpp:470
#: eeschema/symbol_editor/symbol_editor.cpp:1176
msgid "You must save to a different location."
msgstr "Du måste spara till en annan plats."
#: eeschema/symbol_editor/symbol_editor.cpp:546
msgid "Save Symbol As"
msgstr "Spara symbol som"
#: eeschema/symbol_editor/symbol_editor.cpp:549
#: pcbnew/footprint_libraries_utils.cpp:1058
msgid "Save in library:"
msgstr "Spara i biblioteket:"
#: eeschema/symbol_editor/symbol_editor.cpp:623
msgid "No library specified. Symbol could not be saved."
msgstr "Inget bibliotek specificerat. Symbolen kunde inte sparas."
#: eeschema/symbol_editor/symbol_editor.cpp:632
msgid ""
"Derived symbols must be saved in the same library as their parent symbol."
msgstr ""
"Härledda symboler måste sparas i samma bibliotek som deras överordnade "
"symbol."
#: eeschema/symbol_editor/symbol_editor.cpp:651
#, c-format
msgid "Symbol '%s' already exists in library '%s'"
msgstr "Symbolen %s finns redan i biblioteket %s"
#: eeschema/symbol_editor/symbol_editor.cpp:685
#, c-format
msgid "Symbol name '%s' already in use."
msgstr "Symbolnamnet '%s' används redan."
#: eeschema/symbol_editor/symbol_editor.cpp:723
#, c-format
msgid ""
"The symbol '%s' has been modified.\n"
"Do you want to remove it from the library?"
msgstr ""
"Symbolen '%s' har ändrats.\n"
"Vill du ta bort den från biblioteket?"
#: eeschema/symbol_editor/symbol_editor.cpp:735
#, c-format
msgid ""
"The symbol %s is used to derive other symbols.\n"
"Deleting this symbol will delete all of the symbols derived from it.\n"
"\n"
"Do you wish to delete this symbol and all of its derivatives?"
msgstr ""
"Symbolen %s används för att härleda andra symboler.\n"
"Om du tar bort denna symbol raderas alla symboler som härrör från den.\n"
"\n"
"Vill du ta bort den här symbolen och alla dess derivat?"
#: eeschema/symbol_editor/symbol_editor.cpp:740
#: eeschema/tools/ee_actions.cpp:152
msgid "Delete Symbol"
msgstr "Radera symbol"
#: eeschema/symbol_editor/symbol_editor.cpp:741
msgid "Keep Symbol"
msgstr "Håll symbol"
#: eeschema/symbol_editor/symbol_editor.cpp:908 pcbnew/files.cpp:362
#: pcbnew/footprint_libraries_utils.cpp:1205
#, c-format
msgid "Revert '%s' to last version saved?"
msgstr "Återställ '%s' till den senast sparade versionen ?"
#: eeschema/symbol_editor/symbol_editor.cpp:986
#, c-format
msgid "Symbol %s not found in library '%s'."
msgstr "Symbol '%s' hittades inte i bibliotek '%s'."
#: eeschema/symbol_editor/symbol_editor.cpp:1014
msgid "No library specified."
msgstr "Inget bibliotek specificerat."
#: eeschema/symbol_editor/symbol_editor.cpp:1033
#, c-format
msgid "Save Library '%s' As..."
msgstr "Spara bibliotek '%s' som..."
#: eeschema/symbol_editor/symbol_editor.cpp:1082
#, c-format
msgid "Failed to save changes to symbol library file '%s'."
msgstr "Det gick inte att spara ändringarna i symbolbiblioteksfilen '%s'."
#: eeschema/symbol_editor/symbol_editor.cpp:1084
msgid "Error Saving Library"
msgstr "Fel under sparning av bibliotek"
#: eeschema/symbol_editor/symbol_editor.cpp:1126
#, c-format
msgid "Symbol library file '%s' saved."
msgstr "Symbolbiblioteksfilen '%s' sparad."
#: eeschema/symbol_editor/symbol_editor.cpp:1226
msgid "Undefined!"
msgstr "Odefinierad!"
#: eeschema/symbol_editor/symbol_editor.cpp:1227
#: eeschema/symbol_viewer_frame.cpp:452 pcbnew/fp_shape.cpp:430
#: pcbnew/fp_text.cpp:526 pcbnew/fp_textbox.cpp:533 pcbnew/pad.cpp:1759
msgid "Parent"
msgstr "Förälder"
#: eeschema/symbol_editor/symbol_editor.cpp:1236
#: pcbnew/plugins/kicad/pcb_parser.cpp:5647
#: pcbnew/plugins/kicad/pcb_parser.cpp:5687
msgid "Convert"
msgstr "Konvertera"
#: eeschema/symbol_editor/symbol_editor.cpp:1240
msgid "Body"
msgstr "Kropp"
#: eeschema/symbol_editor/symbol_editor.cpp:1243
msgid "Power Symbol"
msgstr "Power-symbol"
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:54
msgid "Import Symbol"
msgstr "Importera symbol"
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:79
#, c-format
msgid "Cannot import symbol library '%s'."
msgstr "Kunde inte importera symbolbiblioteket '%s'."
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:86
#, c-format
msgid "Symbol library file '%s' is empty."
msgstr "Symbolbiblioteksfilen '%s' är tom."
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:98
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:159
#, c-format
msgid "Symbol %s already exists in library '%s'."
msgstr "Symbol %s finns redan i biblioteket '%s'."
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:130
msgid "Export Symbol"
msgstr "Exportera symbol"
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:151
#, c-format
msgid "Error occurred attempting to load symbol library file '%s'."
msgstr "Fel uppstod när symbolbiblioteksfilen '%s' skulle laddas."
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:174
#, c-format
msgid "Insufficient permissions to save library '%s'."
msgstr "Otillräckliga behörigheter för att spara biblioteket '%s'."
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:194
#, c-format
msgid "Error creating symbol library '%s'."
msgstr "Fel vid skapande av symbolbibliotek '%s'."
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:201
#, c-format
msgid "Symbol %s saved to library '%s'."
msgstr "Symbol %s sparad i biblioteket '%s'."
#: eeschema/symbol_lib_table.cpp:252
#, c-format
msgid ""
"Duplicate library nickname '%s' found in symbol library table file line %d"
msgstr ""
"Dubblett av bibliotekssmeknamn '%s' hittades i symbolbibliotekets fil, rad %d"
#: eeschema/symbol_library.cpp:556 eeschema/symbol_tree_model_adapter.cpp:214
#, c-format
msgid "Error loading symbol library '%s'."
msgstr "Fel vid inläsning av symbolbibliotek '%s'."
#: eeschema/symbol_library_manager.cpp:83
#: eeschema/symbol_tree_model_adapter.cpp:107
msgid "Errors loading symbols:"
msgstr "Fel vid inläsning av symboler:"
#: eeschema/symbol_library_manager.cpp:153
#, c-format
msgid "Library '%s' not found in the Symbol Library Table."
msgstr "Biblioteket '%s' hittades inte i symbolbibliotekstabellen."
#: eeschema/symbol_library_manager.cpp:404
msgid "Symbol not found."
msgstr "Symbolen hittades inte."
#: eeschema/symbol_library_manager.cpp:435
#, c-format
msgid "Error loading symbol %s from library '%s'. (%s)"
msgstr "Fel vid inläsning av symbol %s från biblioteket '%s'. (%s)"
#: eeschema/symbol_library_manager.cpp:622
#, c-format
msgid "Cannot load symbol '%s' from library '%s'."
msgstr "Kunde inte ladda symbol '%s' från bibliotek '%s'."
#: eeschema/symbol_library_manager.cpp:775
#, c-format
msgid "Cannot enumerate library '%s'."
msgstr "Det går inte att räkna upp biblioteket '%s'."
#: eeschema/symbol_library_manager.cpp:965
#: eeschema/symbol_library_manager.cpp:1066
#, c-format
msgid "Error saving symbol %s to library '%s'."
msgstr "Fel inträffade vid sparning av symbol %s i bibliotek '%s'."
#: eeschema/symbol_tree_synchronizing_adapter.cpp:268
msgid "(failed to load)"
msgstr "(misslyckades att ladda)"
#: eeschema/symbol_viewer_frame.cpp:120
msgid "KiCad Symbol Library Viewer"
msgstr "KiCad symbolbiblioteksvisare"
#: eeschema/symbol_viewer_frame.cpp:180
msgid ""
"Filter on symbol name, keywords, description and pin count.\n"
"Search terms are separated by spaces. All search terms must match.\n"
"A term which is a number will also match against the pin count."
msgstr ""
"Filtrera på fotavtrycksnamn, nyckelord, beskrivning och antal stift.\n"
"Söktermer är åtskilda av mellanslag. Alla söktermer måste matcha.\n"
"En term som är ett nummer kommer också att matcha mot antalet stift."
#: eeschema/symbol_viewer_frame.cpp:1170 pcbnew/footprint_viewer_frame.cpp:1178
#: pcbnew/footprint_viewer_frame.cpp:1183
msgid "[no library selected]"
msgstr "[inget bibliotek valt]"
#: eeschema/toolbars_symbol_viewer.cpp:51
msgid "Choose symbol"
msgstr "Välj symbol"
#: eeschema/toolbars_symbol_viewer.cpp:55
msgid "Display previous symbol"
msgstr "Visa föregående symbol"
#: eeschema/toolbars_symbol_viewer.cpp:59
msgid "Display next symbol"
msgstr "Visa nästa symbol"
#: eeschema/toolbars_symbol_viewer.cpp:112
msgid "Symbol Viewer"
msgstr "Symbolvisare"
#: eeschema/tools/assign_footprints.cpp:212
msgid "Load Symbol Footprint Link File"
msgstr "Laddningsfil Footprint Link File"
#: eeschema/tools/assign_footprints.cpp:223
msgid "Keep existing footprint field visibility"
msgstr "Behåll befintlig sikt för fotavtryck"
#: eeschema/tools/assign_footprints.cpp:224
msgid "Show all footprint fields"
msgstr "Visa alla fotavtrycksfält"
#: eeschema/tools/assign_footprints.cpp:225
msgid "Hide all footprint fields"
msgstr "Dölj alla fotavtrycksfält"
#: eeschema/tools/assign_footprints.cpp:227
msgid "Select the footprint field visibility setting."
msgstr "Välj inställningen för synlighet för fotavtryck."
#: eeschema/tools/assign_footprints.cpp:228
msgid "Change Visibility"
msgstr "Ändra synlighet"
#: eeschema/tools/assign_footprints.cpp:238
#, c-format
msgid "Failed to open symbol-footprint link file '%s'."
msgstr "Kunde inte öppna symbol-fotavtryck-länkfil '%s'."
#: eeschema/tools/backannotate.cpp:73
msgid "Select at least one property to back annotate."
msgstr "Välj minst en egenskap att överföra till kretsschemat (back-annotate)."
#: eeschema/tools/backannotate.cpp:97
msgid ""
"Cannot fetch PCB netlist because eeschema is opened in stand-alone mode.\n"
"You must launch the KiCad project manager and create a project."
msgstr ""
"Det går inte att hämta mönsterkortets nätlista eftersom "
"kretsschemaredigeraren öppnats i fristående läge.\n"
"Du måste starta KiCad-projekthanteraren och skapa ett projekt."
#: eeschema/tools/backannotate.cpp:164
#, c-format
msgid "Footprint '%s' has no assigned symbol."
msgstr "Fotavtryck '%s' har ingen tilldelad symbol."
#: eeschema/tools/backannotate.cpp:196
#, c-format
msgid "Footprints '%s' and '%s' linked to same symbol."
msgstr "Fotavtryck '%s' och '%s' länkade till samma symbol."
#: eeschema/tools/backannotate.cpp:261
#, c-format
msgid "Cannot find symbol for footprint '%s'."
msgstr "Det går inte att hitta symbolen för fotavtryck '%s'."
#: eeschema/tools/backannotate.cpp:290
#, c-format
msgid ""
"Footprint '%s' is not present on PCB. Corresponding symbols in schematic "
"must be manually deleted (if desired)."
msgstr ""
"Footprint '%s' finns inte på PCB. Motsvarande symboler i schemat måste "
"raderas manuellt (om så önskas)."
#: eeschema/tools/backannotate.cpp:303
msgid "Re-linking footprints requires a fully annotated schematic."
msgstr "Återlänkning av fotavtryck kräver ett fullständigt numrerat schema."
#: eeschema/tools/backannotate.cpp:306
msgid "Footprint re-linking cancelled by user."
msgstr "Återlänkning av fotavtryck avbröts av användaren."
#: eeschema/tools/backannotate.cpp:329
#, c-format
msgid "Change '%s' reference designator to '%s'."
msgstr "Ändra '%s' referensbeteckning till '%s'."
#: eeschema/tools/backannotate.cpp:346
#, c-format
msgid "Change %s footprint assignment from '%s' to '%s'."
msgstr "Ändra %s fotavtryckstilldelning från '%s' till '%s'."
#: eeschema/tools/backannotate.cpp:364
#, c-format
msgid "Change %s value from '%s' to '%s'."
msgstr "Ändra %s -värdet från '%s' till '%s'."
#: eeschema/tools/backannotate.cpp:389
#, c-format
msgid "Cannot find %s pin '%s'."
msgstr "Det går inte att hitta %s stift '%s'."
#: eeschema/tools/backannotate.cpp:532
#, c-format
msgid "Change %s pin %s net label from '%s' to '%s'."
msgstr "Byt %s stift %s nätetikett från '%s' till '%s'."
#: eeschema/tools/backannotate.cpp:557
#, c-format
msgid "Net %s cannot be changed to %s because it is driven by a power pin."
msgstr ""
"Nät %s kunde inte ändras till %s eftersom det drivs av ett "
"strömförsörjningsstift."
#: eeschema/tools/backannotate.cpp:566
#, c-format
msgid "Add label '%s' to %s pin %s net."
msgstr "Lägg till etiketten '%s' till %s pin %s net."
#: eeschema/tools/ee_actions.cpp:45
msgid "Perform electrical rules check"
msgstr "Utför elektriska regler"
#: eeschema/tools/ee_actions.cpp:50
msgid "Symbol Checker"
msgstr "Symbolkontroll"
#: eeschema/tools/ee_actions.cpp:50
msgid "Show the symbol checker window"
msgstr "Visa symbolkontrollfönstret"
#: eeschema/tools/ee_actions.cpp:55
msgid "Simulator..."
msgstr "Simulator..."
#: eeschema/tools/ee_actions.cpp:55
msgid "Simulate circuit in SPICE"
msgstr "Simulera krets i SPICE"
#: eeschema/tools/ee_actions.cpp:61
msgid "Opens the datasheet in a browser"
msgstr "Öppna databladet i en webbläsare"
#: eeschema/tools/ee_actions.cpp:69 pcbnew/tools/pcb_actions.cpp:1246
msgid "Create Corner"
msgstr "Skapa hörn"
#: eeschema/tools/ee_actions.cpp:69 pcbnew/tools/pcb_actions.cpp:1246
msgid "Create a corner"
msgstr "Skapa ett hörn"
#: eeschema/tools/ee_actions.cpp:74 pcbnew/tools/pcb_actions.cpp:1251
msgid "Remove Corner"
msgstr "Ta bort hörnet"
#: eeschema/tools/ee_actions.cpp:74 pcbnew/tools/pcb_actions.cpp:1251
msgid "Remove corner"
msgstr "Ta bort hörnet"
#: eeschema/tools/ee_actions.cpp:87
msgid "Select Node"
msgstr "Välj Node"
#: eeschema/tools/ee_actions.cpp:87
msgid "Select a connection item under the cursor"
msgstr "Välj ett anslutningsobjekt under markören"
#: eeschema/tools/ee_actions.cpp:92
msgid "Select Connection"
msgstr "Välj Anslutning"
#: eeschema/tools/ee_actions.cpp:92
msgid "Select a complete connection"
msgstr "Välj en fullständig anslutning"
#: eeschema/tools/ee_actions.cpp:122
msgid "Save Library As..."
msgstr "Spara bibliotek som ..."
#: eeschema/tools/ee_actions.cpp:122
msgid "Save the current library to a new file."
msgstr "Spara det aktuella biblioteket i en ny fil."
#: eeschema/tools/ee_actions.cpp:127
msgid "New Symbol..."
msgstr "Ny symbol ..."
#: eeschema/tools/ee_actions.cpp:127
msgid "Create a new symbol"
msgstr "Skapa en ny symbol"
#: eeschema/tools/ee_actions.cpp:132
msgid "Edit Symbol"
msgstr "Redigera symbol"
#: eeschema/tools/ee_actions.cpp:132
msgid "Show selected symbol on editor canvas"
msgstr "Visa vald symbol på redigerarens rityta"
#: eeschema/tools/ee_actions.cpp:137
msgid "Duplicate Symbol"
msgstr "Duplicera symbol"
#: eeschema/tools/ee_actions.cpp:137
msgid "Make a copy of the selected symbol"
msgstr "Gör en kopia av den valda symbolen"
#: eeschema/tools/ee_actions.cpp:142
msgid "Rename Symbol..."
msgstr "Byt namn på symbol..."
#: eeschema/tools/ee_actions.cpp:142
msgid "Rename the selected symbol"
msgstr "Byt namn på vald symbol"
#: eeschema/tools/ee_actions.cpp:147
msgid "Save the current symbol to a different library."
msgstr "Spara den aktuella symbolen i ett annat bibliotek."
#: eeschema/tools/ee_actions.cpp:152
msgid "Remove the selected symbol from its library"
msgstr "Ta bort den valda symbolen från biblioteket"
#: eeschema/tools/ee_actions.cpp:167
msgid "Paste Symbol"
msgstr "Klistra in symbol"
#: eeschema/tools/ee_actions.cpp:172
msgid "Import Symbol..."
msgstr "Importera symbol ..."
#: eeschema/tools/ee_actions.cpp:172
msgid "Import a symbol to the current library"
msgstr "Importera en symbol till det aktuella biblioteket"
#: eeschema/tools/ee_actions.cpp:177
msgid "Export..."
msgstr "Exportera..."
#: eeschema/tools/ee_actions.cpp:177
msgid "Export a symbol to a new library file"
msgstr "Exportera en symbol till en ny biblioteksfil"
#: eeschema/tools/ee_actions.cpp:182
msgid "Update Symbol Fields..."
msgstr "Uppdatera symbolfält..."
#: eeschema/tools/ee_actions.cpp:182
msgid "Update symbol to match changes made in parent symbol"
msgstr ""
"Uppdatera symbolen för att inkludera alla ändringar gjorda i dess "
"överordnade symbol"
#: eeschema/tools/ee_actions.cpp:186
msgid "Set Unit Display Name..."
msgstr "Sätt enhetens visningsnamn..."
#: eeschema/tools/ee_actions.cpp:187
msgid "Set the display name for a unit"
msgstr "Ge enheten ett visningsnamn"
#: eeschema/tools/ee_actions.cpp:191
msgid "Add Symbol to Schematic"
msgstr "Lägg till symbol i kretsschemat"
#: eeschema/tools/ee_actions.cpp:196
msgid "Show Pin Electrical Types"
msgstr "Visa elektriska typer för stift"
#: eeschema/tools/ee_actions.cpp:196
msgid "Annotate pins with their electrical types"
msgstr "Märk upp stift med deras elektriska typer"
#: eeschema/tools/ee_actions.cpp:201
msgid "Show Pin Numbers"
msgstr "Visa stiftnummer"
#: eeschema/tools/ee_actions.cpp:201
msgid "Annotate pins with their numbers"
msgstr "Märk upp stift med deras nummer"
#: eeschema/tools/ee_actions.cpp:206
msgid "Show Symbol Tree"
msgstr "Visa symbolträd"
#: eeschema/tools/ee_actions.cpp:211
msgid "Hide Symbol Tree"
msgstr "Göm symbolträd"
#: eeschema/tools/ee_actions.cpp:216
msgid "Export View as PNG..."
msgstr "Exportera vy som PNG ..."
#: eeschema/tools/ee_actions.cpp:216
msgid "Create PNG file from the current view"
msgstr "Skapa en PNG-fil från den aktuella vyn"
#: eeschema/tools/ee_actions.cpp:221
msgid "Export Symbol as SVG..."
msgstr "Exportera symbol som SVG ..."
#: eeschema/tools/ee_actions.cpp:221
msgid "Create SVG file from the current symbol"
msgstr "Skapa SVG-fil från den aktuella symbolen"
#: eeschema/tools/ee_actions.cpp:226
#, fuzzy
msgid "Synchronized Pins Mode"
msgstr "Redigeringsläge för synkroniserade stift"
#: eeschema/tools/ee_actions.cpp:227
msgid ""
"Synchronized Pins Mode\n"
"When enabled propagates all changes (except pin numbers) to other units.\n"
"Enabled by default for multiunit parts with interchangeable units."
msgstr ""
"Redigeringsläge för synkroniserade stift\n"
"När det är aktiverat fortplantas alla ändringar (utom stiftnummer) till "
"andra enheter.\n"
"Aktiverat som standard för komponenter innehållande flera sinsemellan "
"utbytbara enheter."
#: eeschema/tools/ee_actions.cpp:238
msgid "Add Pin"
msgstr "Lägg till pinne"
#: eeschema/tools/ee_actions.cpp:238
msgid "Add a pin"
msgstr "Lägg till ett stift"
#: eeschema/tools/ee_actions.cpp:243 eeschema/tools/ee_actions.cpp:353
#: pagelayout_editor/tools/pl_actions.cpp:54 pcbnew/tools/pcb_actions.cpp:128
msgid "Add Text"
msgstr "Lägg till text"
#: eeschema/tools/ee_actions.cpp:243 pagelayout_editor/tools/pl_actions.cpp:54
#: pcbnew/tools/pcb_actions.cpp:128
msgid "Add a text item"
msgstr "Lägg till ett textobjekt"
#: eeschema/tools/ee_actions.cpp:248 eeschema/tools/ee_actions.cpp:358
#: pcbnew/tools/pcb_actions.cpp:133
msgid "Add Text Box"
msgstr "Lägg till textruta"
#: eeschema/tools/ee_actions.cpp:248
msgid "Add a text box item"
msgstr "Lägg till ett textruteobjekt"
#: eeschema/tools/ee_actions.cpp:253 eeschema/tools/ee_actions.cpp:845
msgid "Add Lines"
msgstr "Lägg till linjer"
#: eeschema/tools/ee_actions.cpp:253 eeschema/tools/ee_actions.cpp:845
msgid "Add connected graphic lines"
msgstr "Lägg till anslutna grafiska linjer"
#: eeschema/tools/ee_actions.cpp:258
msgid "Move Symbol Anchor"
msgstr "Flytta symbolankare"
#: eeschema/tools/ee_actions.cpp:258
msgid "Specify a new location for the symbol anchor"
msgstr "Ange en ny plats för symbolankaren"
#: eeschema/tools/ee_actions.cpp:263
msgid "Finish drawing shape"
msgstr "Avsluta ritningsformen"
#: eeschema/tools/ee_actions.cpp:270
msgid "Push Pin Length"
msgstr "Push Pin Längd"
#: eeschema/tools/ee_actions.cpp:270
msgid "Copy pin length to other pins in symbol"
msgstr "Kopiera stiftlängd till andra stift i symbol"
#: eeschema/tools/ee_actions.cpp:275
msgid "Push Pin Name Size"
msgstr "Push Pin Namn Storlek"
#: eeschema/tools/ee_actions.cpp:275
msgid "Copy pin name size to other pins in symbol"
msgstr "Kopiera stiftnamnsstorlek till andra stift i symbol"
#: eeschema/tools/ee_actions.cpp:280
msgid "Push Pin Number Size"
msgstr "Tryckstiftsnummerstorlek"
#: eeschema/tools/ee_actions.cpp:280
msgid "Copy pin number size to other pins in symbol"
msgstr "Kopiera storlek på stiftnummer till andra stift i symbol"
#: eeschema/tools/ee_actions.cpp:289
msgid "Add Symbol"
msgstr "Lägg till symbol"
#: eeschema/tools/ee_actions.cpp:289
msgid "Add a symbol"
msgstr "Lägg till en symbol"
#: eeschema/tools/ee_actions.cpp:295
msgid "Add Power"
msgstr "Lägg till strömkälla"
#: eeschema/tools/ee_actions.cpp:295
msgid "Add a power symbol"
msgstr "Lägg till en strömförsörjningssymbol"
#: eeschema/tools/ee_actions.cpp:301
msgid "Add No Connect Flag"
msgstr "Lägg till Ingen anslutningsflagga"
#: eeschema/tools/ee_actions.cpp:301
msgid "Add a no-connection flag"
msgstr "Lägg till en flagga utan anslutning"
#: eeschema/tools/ee_actions.cpp:307
msgid "Add Junction"
msgstr "Lägg till korsning"
#: eeschema/tools/ee_actions.cpp:307
msgid "Add a junction"
msgstr "Lägg till en korsning"
#: eeschema/tools/ee_actions.cpp:313
msgid "Add Wire to Bus Entry"
msgstr "Lägg till tråd till busspost"
#: eeschema/tools/ee_actions.cpp:313
msgid "Add a wire entry to a bus"
msgstr "Lägg till en trådpost i en buss"
#: eeschema/tools/ee_actions.cpp:319
msgid "Add Label"
msgstr "Lägg till etikett"
#: eeschema/tools/ee_actions.cpp:319
msgid "Add a net label"
msgstr "Lägg till en nätetikett"
#: eeschema/tools/ee_actions.cpp:324
msgid "Add Net Class Directive"
msgstr "Lägg till direktiv för Nätklass"
#: eeschema/tools/ee_actions.cpp:324
msgid "Add a net class directive label"
msgstr "Lägg till en etikett med direktiv för nätklass"
#: eeschema/tools/ee_actions.cpp:330
msgid "Add Hierarchical Label"
msgstr "Lägg till hierarkisk etikett"
#: eeschema/tools/ee_actions.cpp:330
msgid "Add a hierarchical label"
msgstr "Lägg till en hierarkisk etikett"
#: eeschema/tools/ee_actions.cpp:336
msgid "Add Sheet"
msgstr "Lägg till ark"
#: eeschema/tools/ee_actions.cpp:336
msgid "Add a hierarchical sheet"
msgstr "Lägg till ett hierarkiskt ark"
#: eeschema/tools/ee_actions.cpp:341
msgid "Import Sheet Pin"
msgstr "Importera stift"
#: eeschema/tools/ee_actions.cpp:341
msgid "Import a hierarchical sheet pin"
msgstr "Importera ett hierarkisk arkstift"
#: eeschema/tools/ee_actions.cpp:347
msgid "Add Global Label"
msgstr "Lägg till global etikett"
#: eeschema/tools/ee_actions.cpp:347
msgid "Add a global label"
msgstr "Lägg till en global etikett"
#: eeschema/tools/ee_actions.cpp:353
msgid "Add text"
msgstr "Lägg till text"
#: eeschema/tools/ee_actions.cpp:358
msgid "Add a text box"
msgstr "Lägg till ett textruteobjekt"
#: eeschema/tools/ee_actions.cpp:363 pagelayout_editor/tools/pl_actions.cpp:49
msgid "Add Rectangle"
msgstr "Lägg till rektangel"
#: eeschema/tools/ee_actions.cpp:363 pagelayout_editor/tools/pl_actions.cpp:49
msgid "Add a rectangle"
msgstr "Lägg till en rektangel"
#: eeschema/tools/ee_actions.cpp:368
msgid "Add Circle"
msgstr "Lägg till cirkel"
#: eeschema/tools/ee_actions.cpp:368
msgid "Add a circle"
msgstr "Lägg till en cirkel"
#: eeschema/tools/ee_actions.cpp:373
msgid "Add Arc"
msgstr "Lägg till båge"
#: eeschema/tools/ee_actions.cpp:373
msgid "Add an arc"
msgstr "Lägg till en båge"
#: eeschema/tools/ee_actions.cpp:378 pcbnew/tools/pcb_actions.cpp:122
msgid "Add Image"
msgstr "Infoga bilder"
#: eeschema/tools/ee_actions.cpp:378 pcbnew/tools/pcb_actions.cpp:122
msgid "Add bitmap image"
msgstr "Lägg till bitmappsbild"
#: eeschema/tools/ee_actions.cpp:383
msgid "Finish Sheet"
msgstr "Slutför ark"
#: eeschema/tools/ee_actions.cpp:383
msgid "Finish drawing sheet"
msgstr "Avsluta ritningsarket"
#: eeschema/tools/ee_actions.cpp:396
msgid "Repeat Last Item"
msgstr "Upprepa sista artikeln"
#: eeschema/tools/ee_actions.cpp:396
msgid "Duplicates the last drawn item"
msgstr "Kopierar det senast ritade objektet"
#: eeschema/tools/ee_actions.cpp:400 pcbnew/tools/pcb_actions.cpp:314
msgid "Rotate Clockwise"
msgstr "Rotera Medurs"
#: eeschema/tools/ee_actions.cpp:400 pcbnew/tools/pcb_actions.cpp:314
msgid "Rotates selected item(s) clockwise"
msgstr "Rotera valda objekt medurs"
#: eeschema/tools/ee_actions.cpp:406 pcbnew/tools/pcb_actions.cpp:320
msgid "Rotate Counterclockwise"
msgstr "Rotera motsols"
#: eeschema/tools/ee_actions.cpp:406
msgid "Rotates selected item(s) counter-clockwise"
msgstr "Rotera valda objekt moturs"
#: eeschema/tools/ee_actions.cpp:412 pcbnew/tools/pcb_actions.cpp:336
msgid "Mirror Vertically"
msgstr "Spegelvänd vertikalt"
#: eeschema/tools/ee_actions.cpp:412
msgid "Flips selected item(s) from top to bottom"
msgstr "Vänd markerade objekt från topp till botten"
#: eeschema/tools/ee_actions.cpp:418 pcbnew/tools/pcb_actions.cpp:331
msgid "Mirror Horizontally"
msgstr "Spegelvänd horisontellt"
#: eeschema/tools/ee_actions.cpp:418
msgid "Flips selected item(s) from left to right"
msgstr "Vänd markerade objekt från vänster till höger"
#: eeschema/tools/ee_actions.cpp:424 pcbnew/tools/edit_tool_move_fct.cpp:183
#: pcbnew/tools/pcb_actions.cpp:342
msgid "Swap"
msgstr "Byt plats"
#: eeschema/tools/ee_actions.cpp:424 pcbnew/tools/pcb_actions.cpp:342
msgid "Swaps selected items' positions"
msgstr "Byter plats på de valda objektens positioner"
#: eeschema/tools/ee_actions.cpp:430 pcbnew/tools/pcb_actions.cpp:379
msgid "Properties..."
msgstr "Egenskaper..."
#: eeschema/tools/ee_actions.cpp:430 pcbnew/tools/pcb_actions.cpp:379
msgid "Displays item properties dialog"
msgstr "Visar dialogrutan för objektegenskaper"
#: eeschema/tools/ee_actions.cpp:436
msgid "Edit Reference Designator..."
msgstr "Redigera referensbeteckning ..."
#: eeschema/tools/ee_actions.cpp:436
msgid "Displays reference designator dialog"
msgstr "Visar dialogbok för referensbeteckning"
#: eeschema/tools/ee_actions.cpp:442
msgid "Edit Value..."
msgstr "Redigera värde ..."
#: eeschema/tools/ee_actions.cpp:442
msgid "Displays value field dialog"
msgstr "Visar dialogrutan för värdefält"
#: eeschema/tools/ee_actions.cpp:448
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:230
msgid "Edit Footprint..."
msgstr "Redigera fotavtryck ..."
#: eeschema/tools/ee_actions.cpp:448
msgid "Displays footprint field dialog"
msgstr "Visar dialogrutan för fotavtrycksfält"
#: eeschema/tools/ee_actions.cpp:454
msgid "Autoplace Fields"
msgstr "Autoplacera fält"
#: eeschema/tools/ee_actions.cpp:454
msgid "Runs the automatic placement algorithm on the symbol or sheet's fields"
msgstr ""
"Kör den automatiska placeringsalgoritmen på symbolens eller arkets fält"
#: eeschema/tools/ee_actions.cpp:459
msgid "Change Symbols..."
msgstr "Ändra symboler..."
#: eeschema/tools/ee_actions.cpp:460
msgid "Assign different symbols from the library"
msgstr "Tilldela olika symboler från biblioteket"
#: eeschema/tools/ee_actions.cpp:465
msgid "Update Symbols from Library..."
msgstr "Uppdatera symboler från biblioteket ..."
#: eeschema/tools/ee_actions.cpp:466
msgid "Update symbols to include any changes from the library"
msgstr "Uppdatera symboler för att inkludera alla ändringar från biblioteket"
#: eeschema/tools/ee_actions.cpp:472
msgid "Assign a different symbol from the library"
msgstr "Tilldela en annan symbol från biblioteket"
#: eeschema/tools/ee_actions.cpp:477
msgid "Update Symbol..."
msgstr "Uppdateringssymbol ..."
#: eeschema/tools/ee_actions.cpp:478
msgid "Update symbol to include any changes from the library"
msgstr "Uppdatera symbol för att inkludera alla ändringar från biblioteket"
#: eeschema/tools/ee_actions.cpp:483 pcbnew/tools/pcb_actions.cpp:709
msgid "Assign Netclass..."
msgstr "Tilldela nätklass ..."
#: eeschema/tools/ee_actions.cpp:483 pcbnew/tools/pcb_actions.cpp:709
msgid "Assign a netclass to nets matching a pattern"
msgstr "Tilldela en nätklass till nät som matchar vissa villkor"
#: eeschema/tools/ee_actions.cpp:488
msgid "De Morgan Conversion"
msgstr "De Morgan-omvandling"
#: eeschema/tools/ee_actions.cpp:488
msgid "Switch between De Morgan representations"
msgstr "Växla mellan De Morgan-representationer"
#: eeschema/tools/ee_actions.cpp:493
msgid "De Morgan Standard"
msgstr "De Morgan-standard"
#: eeschema/tools/ee_actions.cpp:493
msgid "Switch to standard De Morgan representation"
msgstr "Byt till standard De Morgan-representation"
#: eeschema/tools/ee_actions.cpp:498
msgid "De Morgan Alternate"
msgstr "De Morgan alternativ"
#: eeschema/tools/ee_actions.cpp:498
msgid "Switch to alternate De Morgan representation"
msgstr "Byt till alternativ De Morgan-representation"
#: eeschema/tools/ee_actions.cpp:503
msgid "Change to Label"
msgstr "Byt till etikett"
#: eeschema/tools/ee_actions.cpp:503
msgid "Change existing item to a label"
msgstr "Ändra befintligt objekt till en etikett"
#: eeschema/tools/ee_actions.cpp:508
msgid "Change to Directive Label"
msgstr "Byt till direktivetikett"
#: eeschema/tools/ee_actions.cpp:508
msgid "Change existing item to a directive label"
msgstr "Ändra befintligt objekt till en direktivetikett"
#: eeschema/tools/ee_actions.cpp:513
msgid "Change to Hierarchical Label"
msgstr "Byt till hierarkisk etikett"
#: eeschema/tools/ee_actions.cpp:513
msgid "Change existing item to a hierarchical label"
msgstr "Ändra befintligt objekt till en hierarkisk etikett"
#: eeschema/tools/ee_actions.cpp:518
msgid "Change to Global Label"
msgstr "Byt till Global Label"
#: eeschema/tools/ee_actions.cpp:518
msgid "Change existing item to a global label"
msgstr "Ändra befintligt objekt till en global etikett"
#: eeschema/tools/ee_actions.cpp:523
msgid "Change to Text"
msgstr "Ändra till text"
#: eeschema/tools/ee_actions.cpp:523
msgid "Change existing item to a text comment"
msgstr "Ändra befintligt objekt till en textkommentar"
#: eeschema/tools/ee_actions.cpp:528
msgid "Change to Text Box"
msgstr "Byt till textruta"
#: eeschema/tools/ee_actions.cpp:528
msgid "Change existing item to a text box"
msgstr "Ändra befintligt objekt till en textruta"
#: eeschema/tools/ee_actions.cpp:533
msgid "Cleanup Sheet Pins"
msgstr "Rensa upp arknålar"
#: eeschema/tools/ee_actions.cpp:533
msgid "Delete unreferenced sheet pins"
msgstr "Ta bort arksnålar utan referenser"
#: eeschema/tools/ee_actions.cpp:537 pcbnew/tools/pcb_actions.cpp:504
msgid "Edit Text & Graphics Properties..."
msgstr "Redigera text- och grafikegenskaper ..."
#: eeschema/tools/ee_actions.cpp:538
msgid "Edit text and graphics properties globally across schematic"
msgstr "Redigera text- och grafikegenskaper över hela schemat"
#: eeschema/tools/ee_actions.cpp:543
msgid "Symbol Properties..."
msgstr "Symbolegenskaper..."
#: eeschema/tools/ee_actions.cpp:543
msgid "Displays symbol properties dialog"
msgstr "Visa dialogrutan symbolegenskaper"
#: eeschema/tools/ee_actions.cpp:548
msgid "Pin Table..."
msgstr "Stifttabell..."
#: eeschema/tools/ee_actions.cpp:548
msgid "Displays pin table for bulk editing of pins"
msgstr "Visar stifttabell för massredigering av stift"
#: eeschema/tools/ee_actions.cpp:553
#, fuzzy
msgid "Break"
msgstr "Bryt buss"
#: eeschema/tools/ee_actions.cpp:553
#, fuzzy
msgid "Divide into connected segments"
msgstr "Via är inte ansluten"
#: eeschema/tools/ee_actions.cpp:558
msgid "Slice"
msgstr ""
#: eeschema/tools/ee_actions.cpp:558
#, fuzzy
msgid "Divide into unconnected segments"
msgstr "Via är inte ansluten"
#: eeschema/tools/ee_actions.cpp:568
msgid "Add a simulator probe"
msgstr "Lägg till en simulatorprob"
#: eeschema/tools/ee_actions.cpp:572
msgid "Select a value to be tuned"
msgstr "Välj ett värde som ska ställas in"
#: eeschema/tools/ee_actions.cpp:577 pcbnew/tools/pcb_actions.cpp:790
msgid "Highlight net under cursor"
msgstr "Markera nätet under markören"
#: eeschema/tools/ee_actions.cpp:582 pcbnew/tools/pcb_actions.cpp:800
msgid "Clear Net Highlighting"
msgstr "Rensa nätmarkering"
#: eeschema/tools/ee_actions.cpp:582 pcbnew/tools/pcb_actions.cpp:800
msgid "Clear any existing net highlighting"
msgstr "Rensa all befintlig nätmarkering"
#: eeschema/tools/ee_actions.cpp:589
msgid "Highlight Nets"
msgstr "Markera Net"
#: eeschema/tools/ee_actions.cpp:589
msgid "Highlight wires and pins of a net"
msgstr "Markera trådar och stift i ett nät"
#: eeschema/tools/ee_actions.cpp:595
msgid "Edit with Symbol Editor"
msgstr "Redigera med Symbolredigeraren"
#: eeschema/tools/ee_actions.cpp:595
msgid "Open the selected symbol in the Symbol Editor"
msgstr "Öppna den valda symbolen i symbolredigeraren"
#: eeschema/tools/ee_actions.cpp:601
msgid "Open the library symbol in the Symbol Editor"
msgstr "Öppna bibliotekssymbolen i symbolredigeraren"
#: eeschema/tools/ee_actions.cpp:606
msgid "Edit Symbol Fields..."
msgstr "Redigera symbolfält ..."
#: eeschema/tools/ee_actions.cpp:606
msgid "Bulk-edit fields of all symbols in schematic"
msgstr "Massredigera fält för alla symboler i kretsschemat"
#: eeschema/tools/ee_actions.cpp:611
msgid "Edit Symbol Library Links..."
msgstr "Redigera symbolbibliotekslänkar ..."
#: eeschema/tools/ee_actions.cpp:611
msgid "Edit links between schematic and library symbols"
msgstr "Redigera länkar mellan kretsschema- och bibliotekssymboler"
#: eeschema/tools/ee_actions.cpp:616
msgid "Assign Footprints..."
msgstr "Tilldela fotavtryck..."
#: eeschema/tools/ee_actions.cpp:616
msgid "Run footprint assignment tool"
msgstr "Kör tilldelningsverktyg för fotavtryck"
#: eeschema/tools/ee_actions.cpp:621
msgid "Import Footprint Assignments..."
msgstr "Importera tilldelningar av fotavtryck ..."
#: eeschema/tools/ee_actions.cpp:622
msgid ""
"Import symbol footprint assignments from .cmp file created by board editor"
msgstr ""
"Importera symbolernas fotavtryckstilldelningar från .cmp-fil skapad av "
"mönsterkortsredigeraren"
#: eeschema/tools/ee_actions.cpp:627
msgid "Annotate Schematic..."
msgstr "Numrera komponenter i kretsschemat..."
#: eeschema/tools/ee_actions.cpp:627
msgid "Fill in schematic symbol reference designators"
msgstr "Fyll i referensbeteckningar för kretsschemats symboler"
#: eeschema/tools/ee_actions.cpp:632
msgid "Schematic Setup..."
msgstr "Kretsschemainställningar..."
#: eeschema/tools/ee_actions.cpp:633
msgid "Edit schematic setup including annotation styles and electrical rules"
msgstr ""
"Redigera inställningar för kretsschemat inklusive numreringssstilar och "
"elektriska regler"
#: eeschema/tools/ee_actions.cpp:638
msgid "Edit Sheet Page Number..."
msgstr "Ändra bladets sidnummer..."
#: eeschema/tools/ee_actions.cpp:639
msgid "Edit the page number of the current or selected sheet"
msgstr "Redigera sidnumret för det aktuella eller valda arket"
#: eeschema/tools/ee_actions.cpp:643
msgid "Rescue Symbols..."
msgstr "Rädda symboler ..."
#: eeschema/tools/ee_actions.cpp:644
msgid "Find old symbols in project and rename/rescue them"
msgstr "Hitta gamla symboler i projektet och byt namn på / rädda dem"
#: eeschema/tools/ee_actions.cpp:649
msgid "Remap Legacy Library Symbols..."
msgstr "Remap Legacy Library Symbols ..."
#: eeschema/tools/ee_actions.cpp:650
msgid ""
"Remap library symbol references in legacy schematics to the symbol library "
"table"
msgstr ""
"Omforma bibliotekssymbolreferenser i äldre kretsscheman till "
"symbolbibliotekstabellen"
#: eeschema/tools/ee_actions.cpp:655
msgid "Export Drawing to Clipboard"
msgstr "Exportera ritning till Urklipp"
#: eeschema/tools/ee_actions.cpp:655
msgid "Export drawing of current sheet to clipboard"
msgstr "Exportera ritning av aktuellt ark till Urklipp"
#: eeschema/tools/ee_actions.cpp:660
msgid "Switch to PCB Editor"
msgstr "Byt till mönsterkortsredigeraren"
#: eeschema/tools/ee_actions.cpp:660
msgid "Open PCB in board editor"
msgstr "Öppna mönsterkort i mönsterkortsredigeraren"
#: eeschema/tools/ee_actions.cpp:665
msgid "Export Netlist..."
msgstr "Exportera nätlista..."
#: eeschema/tools/ee_actions.cpp:665
msgid "Export file containing netlist in one of several formats"
msgstr "Exportera fil som innehåller nätlista i ett av flera format"
#: eeschema/tools/ee_actions.cpp:670
msgid "Generate BOM..."
msgstr "Skapa komponentlista..."
#: eeschema/tools/ee_actions.cpp:670
msgid "Generate a bill of materials for the current schematic"
msgstr "Skapa en materialförteckning för det aktuella schemat"
#: eeschema/tools/ee_actions.cpp:675
msgid "Export Symbols to Library..."
msgstr "Exportera symboler till bibliotek..."
#: eeschema/tools/ee_actions.cpp:676
msgid ""
"Add symbols used in schematic to an existing symbol library\n"
"(does not remove other symbols from this library)"
msgstr ""
"Lägg till symboler som används i kretsschemat till ett befintligt "
"symbolbibliotek\n"
"(tar inte bort andra symboler från detta bibliotek)"
#: eeschema/tools/ee_actions.cpp:682
msgid "Export Symbols to New Library..."
msgstr "Exportera symboler till nytt bibliotek..."
#: eeschema/tools/ee_actions.cpp:683
msgid ""
"Create a new symbol library using the symbols used in the schematic\n"
"(if the library already exists it will be replaced)"
msgstr ""
"Skapa ett nytt symbolbibliotek med de symboler som används i kretsschemat\n"
"(om biblioteket redan finns kommer det att skrivas över)"
#: eeschema/tools/ee_actions.cpp:689
msgid "Select on PCB"
msgstr "Välj på mönsterkort"
#: eeschema/tools/ee_actions.cpp:690
msgid "Select corresponding items in PCB editor"
msgstr "Markera motsvarande objekt i mönsterkortsredigeraren"
#: eeschema/tools/ee_actions.cpp:695
msgid "Show Hidden Pins"
msgstr "Visa dolda stift"
#: eeschema/tools/ee_actions.cpp:695
msgid "Toggle display of hidden pins"
msgstr "Växla visning av dolda stift"
#: eeschema/tools/ee_actions.cpp:700
msgid "Show Hidden Fields"
msgstr "Visa dolda fält"
#: eeschema/tools/ee_actions.cpp:700
msgid "Toggle display of hidden text fields"
msgstr "Växla visning av dolda textfält"
#: eeschema/tools/ee_actions.cpp:704
msgid "Show ERC Warnings"
msgstr "Visa ERC-varningar"
#: eeschema/tools/ee_actions.cpp:704
msgid "Show markers for electrical rules checker warnings"
msgstr "Visa markörer för varningar från kontroll av elektriska regler"
#: eeschema/tools/ee_actions.cpp:708
msgid "Show ERC Errors"
msgstr "Visa ERC-fel"
#: eeschema/tools/ee_actions.cpp:708
msgid "Show markers for electrical rules checker errors"
msgstr "Visa markörer för fel från kontroll av elektriska regler"
#: eeschema/tools/ee_actions.cpp:712
msgid "Show ERC Exclusions"
msgstr "Visa ERC-undantag"
#: eeschema/tools/ee_actions.cpp:713
msgid "Show markers for excluded electrical rules checker violations"
msgstr ""
"Visa markörer för undantagna överträdelser från kontroll av elektriska regler"
#: eeschema/tools/ee_actions.cpp:717 eeschema/tools/ee_actions.cpp:722
#: eeschema/tools/ee_actions.cpp:728 eeschema/tools/ee_actions.cpp:734
msgid "Line Mode for Wires and Buses"
msgstr "Linjeläge för ledare och bussar"
#: eeschema/tools/ee_actions.cpp:717
msgid "Draw and drag at any angle"
msgstr "Rita och dra i valfri vinkel"
#: eeschema/tools/ee_actions.cpp:723
msgid "Constrain drawing and dragging to horizontal or vertical motions"
msgstr "Begränsa ritning och dragning till horisontella och vertikala rörelser"
#: eeschema/tools/ee_actions.cpp:729
msgid ""
"Constrain drawing and dragging to horizontal, vertical, or 45-degree angle "
"motions"
msgstr ""
"Begränsa ritning och dragning till rörelse horisontellt, vertikalt eller i "
"45 graders vinkel"
#: eeschema/tools/ee_actions.cpp:734
msgid "Switch to next line mode"
msgstr "Byt till nästa linjeläge"
#: eeschema/tools/ee_actions.cpp:739
msgid "Annotate Automatically"
msgstr "Numrera automatiskt"
#: eeschema/tools/ee_actions.cpp:739
msgid "Toggle automatic annotation of new parts symbols"
msgstr "Växla automatisk numrering av nya komponentsymboler"
#: eeschema/tools/ee_actions.cpp:744
msgid "Repair Schematic"
msgstr "Reparera schema"
#: eeschema/tools/ee_actions.cpp:745
msgid "Run various diagnostics and attempt to repair schematic"
msgstr "Kör olika diagnostikrutiner och försök att reparera schemat"
#: eeschema/tools/ee_actions.cpp:751 pcbnew/tools/pcb_actions.cpp:855
msgid "Scripting Console"
msgstr "Skriptkonsol"
#: eeschema/tools/ee_actions.cpp:751 pcbnew/tools/pcb_actions.cpp:855
msgid "Show the Python scripting console"
msgstr "Visa Python-skriptkonsolen"
#: eeschema/tools/ee_actions.cpp:758
msgid "Change Sheet"
msgstr "Byt ark"
#: eeschema/tools/ee_actions.cpp:758
msgid "Change to provided sheet's contents in the schematic editor"
msgstr "Byt till det valda arkets innehåll i kretsschemaredigeraren"
#: eeschema/tools/ee_actions.cpp:763
msgid "Enter Sheet"
msgstr "Ange ark"
#: eeschema/tools/ee_actions.cpp:763
msgid "Display the selected sheet's contents in the schematic editor"
msgstr "Visa det valda arkets innehåll i kretsschemaredigeraren"
#: eeschema/tools/ee_actions.cpp:769
msgid "Leave Sheet"
msgstr "Lämna arket"
#: eeschema/tools/ee_actions.cpp:769
msgid "Display the parent sheet in the schematic editor"
msgstr "Visa det överordnade arket i kretsschemaredigeraren"
#: eeschema/tools/ee_actions.cpp:774
msgid "Navigate Up"
msgstr "Gå uppåt"
#: eeschema/tools/ee_actions.cpp:774
msgid "Navigate up one sheet in the hierarchy"
msgstr "Gå upp ett ark i hierarkin"
#: eeschema/tools/ee_actions.cpp:780
msgid "Navigate Back"
msgstr "Gå tillbaka"
#: eeschema/tools/ee_actions.cpp:780
msgid "Move forward in sheet navigation history"
msgstr "Gå framåt ett ark i historiken"
#: eeschema/tools/ee_actions.cpp:786
msgid "Navigate Forward"
msgstr "Gå framåt"
#: eeschema/tools/ee_actions.cpp:786
msgid "Move backward in sheet navigation history"
msgstr "Gå bakåt ett ark i historiken"
#: eeschema/tools/ee_actions.cpp:792
msgid "Previous Sheet"
msgstr "Föregående ark"
#: eeschema/tools/ee_actions.cpp:792
msgid "Move to previous sheet by number"
msgstr "Flytta till föregående ark enligt numrering"
#: eeschema/tools/ee_actions.cpp:798
msgid "Next Sheet"
msgstr "Nästa ark"
#: eeschema/tools/ee_actions.cpp:798
msgid "Move to next sheet by number"
msgstr "Flytta till nästa ark enligt numrering"
#: eeschema/tools/ee_actions.cpp:804
msgid "Hierarchy Navigator"
msgstr "Hierarkinavigator"
#: eeschema/tools/ee_actions.cpp:804
msgid "Show or hide the schematic sheet hierarchy navigator"
msgstr "Visa eller göm navigator för kretsschema-arkens hierarki"
#: eeschema/tools/ee_actions.cpp:812
msgid "Add Junctions to Selection where needed"
msgstr "Lägg till korsningar i urvalet där det behövs"
#: eeschema/tools/ee_actions.cpp:825
msgid "Add Wire"
msgstr "Lägg till tråd"
#: eeschema/tools/ee_actions.cpp:825
msgid "Add a wire"
msgstr "Lägg till en tråd"
#: eeschema/tools/ee_actions.cpp:832
msgid "Add Bus"
msgstr "Lägg till Buss"
#: eeschema/tools/ee_actions.cpp:832
msgid "Add a bus"
msgstr "Lägg till en buss"
#: eeschema/tools/ee_actions.cpp:838
#: eeschema/tools/sch_line_wire_bus_tool.cpp:76
#: eeschema/tools/sch_line_wire_bus_tool.cpp:132
msgid "Unfold from Bus"
msgstr "Vik ut från buss"
#: eeschema/tools/ee_actions.cpp:838
msgid "Break a wire out of a bus"
msgstr "Bryt en tråd ur en buss"
#: eeschema/tools/ee_actions.cpp:851 pcbnew/tools/pcb_actions.cpp:1502
msgid "Undo Last Segment"
msgstr "Ångra senaste segmentet"
#: eeschema/tools/ee_actions.cpp:851
msgid "Walks the current line back one segment."
msgstr "Går tillbaka ett segment på den aktuella ledaren."
#: eeschema/tools/ee_actions.cpp:857
msgid "Switch Segment Posture"
msgstr "Växla segmentets ställning"
#: eeschema/tools/ee_actions.cpp:857
msgid "Switches posture of the current segment."
msgstr "Byt ställning för det nuvarande segmentet."
#: eeschema/tools/ee_actions.cpp:863
msgid "Finish Wire or Bus"
msgstr "Slutför ledning eller buss"
#: eeschema/tools/ee_actions.cpp:863
msgid "Complete drawing at current segment"
msgstr "Komplett ritning vid nuvarande segment"
#: eeschema/tools/ee_actions.cpp:868
msgid "Finish Wire"
msgstr "Avsluta Wire"
#: eeschema/tools/ee_actions.cpp:868
msgid "Complete wire with current segment"
msgstr "Komplett kabel med nuvarande segment"
#: eeschema/tools/ee_actions.cpp:873
msgid "Finish Bus"
msgstr "Slutför buss"
#: eeschema/tools/ee_actions.cpp:873
msgid "Complete bus with current segment"
msgstr "Komplett buss med nuvarande segment"
#: eeschema/tools/ee_actions.cpp:878
msgid "Finish Lines"
msgstr "Slutför linjer"
#: eeschema/tools/ee_actions.cpp:878
msgid "Complete connected lines with current segment"
msgstr "Komplett anslutna linjer med nuvarande segment"
#: eeschema/tools/ee_actions.cpp:887 pagelayout_editor/tools/pl_actions.cpp:68
#: pcbnew/dialogs/panel_edit_options_base.cpp:359
#: pcbnew/tools/edit_tool_move_fct.cpp:241 pcbnew/tools/pcb_actions.cpp:270
msgid "Move"
msgstr "Flytta"
#: eeschema/tools/ee_actions.cpp:887 pagelayout_editor/tools/pl_actions.cpp:68
#: pcbnew/tools/pcb_actions.cpp:270
msgid "Moves the selected item(s)"
msgstr "Flyttar markerade objekt"
#: eeschema/tools/ee_actions.cpp:892
msgid "Drag"
msgstr "Dra"
#: eeschema/tools/ee_actions.cpp:892
msgid "Drags the selected item(s)"
msgstr "Drar markerade objekt"
#: eeschema/tools/ee_actions.cpp:896
msgid "Move Activate"
msgstr "Flytta Aktivera"
#: eeschema/tools/ee_actions.cpp:900
msgid "Symbol Move Activate"
msgstr "Symbol Flytta Aktivera"
#: eeschema/tools/ee_actions.cpp:904
msgid "Align Elements to Grid"
msgstr "Justera element till rutnät"
#: eeschema/tools/ee_actions.cpp:910
msgid "Save Current Sheet Copy As..."
msgstr "Spara en kopia av aktuellt blad som..."
#: eeschema/tools/ee_actions.cpp:910
msgid "Save a copy of the current sheet to another location or name"
msgstr ""
"Spara en kopia av det aktuella bladet till en annan plats eller med ett "
"annat namn"
#: eeschema/tools/ee_inspection_tool.cpp:222
msgid "No symbol issues found."
msgstr "Inga symbolfel hittades."
#: eeschema/tools/ee_inspection_tool.cpp:226
msgid "Symbol Warnings"
msgstr "Symbolvarningar"
#: eeschema/tools/ee_inspection_tool.cpp:298
msgid "No datasheet defined."
msgstr "Inget datablad definierat."
#: eeschema/tools/sch_drawing_tools.cpp:282
msgid "Press <ESC> to cancel symbol creation."
msgstr "Tryck på <ESC> för att avbryta symbol."
#: eeschema/tools/sch_drawing_tools.cpp:564 pcbnew/tools/drawing_tool.cpp:643
msgid "Press <ESC> to cancel image creation."
msgstr "Tryck på <ESC> för att avbryta bild."
#: eeschema/tools/sch_drawing_tools.cpp:615
#: pagelayout_editor/pl_editor_frame.cpp:857
#: pagelayout_editor/pl_editor_frame.cpp:865 pcbnew/tools/drawing_tool.cpp:695
#, c-format
msgid "Could not load image from '%s'."
msgstr "Det gick inte att ladda bilden från '%s'."
#: eeschema/tools/sch_drawing_tools.cpp:804
msgid "Junction location contains no joinable wires and/or pins."
msgstr ""
"Korsningspunkten innehåller inga anslutningsbara ledningar och/eller stift."
#: eeschema/tools/sch_drawing_tools.cpp:1218
msgid "No new hierarchical labels found."
msgstr "Inga nya hierarkiska etiketter hittades."
#: eeschema/tools/sch_drawing_tools.cpp:1259
#: eeschema/tools/symbol_editor_drawing_tools.cpp:175
msgid "Press <ESC> to cancel item creation."
msgstr "Tryck på <ESC> för att avbryta föremål."
#: eeschema/tools/sch_drawing_tools.cpp:1367
msgid "Click over a sheet."
msgstr "Klicka över ett ark."
#: eeschema/tools/sch_drawing_tools.cpp:1779
msgid "Press <ESC> to cancel sheet creation."
msgstr "Tryck på <ESC> för att avbryta blad."
#: eeschema/tools/sch_edit_tool.cpp:78
msgid "Symbol Unit"
msgstr "Symbolenhet"
#: eeschema/tools/sch_edit_tool.cpp:98
msgid "no symbol selected"
msgstr "ingen symbol vald"
#: eeschema/tools/sch_edit_tool.cpp:107
msgid "symbol is not multi-unit"
msgstr "symbolen innehåller inte flera enheter"
#: eeschema/tools/sch_edit_tool.cpp:362 eeschema/tools/sch_edit_tool.cpp:403
#: eeschema/tools/sch_edit_tool.cpp:442
msgid "Edit Main Fields"
msgstr "Redigera huvudfält"
#: eeschema/tools/sch_edit_tool.cpp:465
msgid "Change To"
msgstr "Ändra till"
#: eeschema/tools/sch_edit_tool.cpp:1087
msgid "Label value cannot go below zero"
msgstr "Etikettvärdet kan inte gå under noll"
#: eeschema/tools/sch_edit_tool.cpp:1356 eeschema/tools/sch_edit_tool.cpp:1359
#: eeschema/tools/symbol_editor_edit_tool.cpp:531
#, c-format
msgid "Edit %s Field"
msgstr "Redigera %s fält"
#: eeschema/tools/sch_edit_tool.cpp:1361
#: eeschema/tools/symbol_editor_edit_tool.cpp:533
#, c-format
msgid "Edit '%s' Field"
msgstr "Redigera '%s' fält"
#: eeschema/tools/sch_edit_tool.cpp:1899 eeschema/tools/sch_edit_tool.cpp:1988
msgid "<empty>"
msgstr "<tom>"
#: eeschema/tools/sch_edit_tool.cpp:2255
msgid "Do you wish to delete the unreferenced pins from this sheet?"
msgstr "Vill du ta bort de icke refererade stiften från det här arket?"
#: eeschema/tools/sch_edit_tool.cpp:2315
#, c-format
msgid "Enter page number for sheet path%s"
msgstr "Ange sidnummer för arkväg %s"
#: eeschema/tools/sch_edit_tool.cpp:2318
#: eeschema/widgets/hierarchy_pane.cpp:287
msgid "Edit Sheet Page Number"
msgstr "Ändra bladets sidnummer"
#: eeschema/tools/sch_editor_control.cpp:147
#, c-format
msgid "Revert '%s' (and all sub-sheets) to last version saved?"
msgstr ""
"Återställ '%s' (och alla underordnade ark) till den senast sparade "
"versionen ?"
#: eeschema/tools/sch_editor_control.cpp:560
msgid "Reached end of schematic."
msgstr "Uppnådde slutet på schemat."
#: eeschema/tools/sch_editor_control.cpp:561
msgid "Reached end of sheet."
msgstr "Nått slutet på arket."
#: eeschema/tools/sch_editor_control.cpp:565
msgid "Find again to wrap around to the start."
msgstr "Sök igen för att gå tillbaka till början."
#: eeschema/tools/sch_editor_control.cpp:797
#, c-format
msgid "Could not add library '%s'."
msgstr "Kunde inte lägga till bibliotek '%s'."
#: eeschema/tools/sch_editor_control.cpp:810
msgid "Update symbols in schematic to refer to new library?"
msgstr ""
"Uppdatera symboler i kretsschemat så att de refererar till nytt bibliotek?"
#: eeschema/tools/sch_editor_control.cpp:1103
msgid "Error: duplicate sub-sheet names found in current sheet."
msgstr "Fel: dubbletter av underarknamn hittades i det aktuella arket."
#: eeschema/tools/sch_editor_control.cpp:1203
#, fuzzy
msgid "No net selected."
msgstr "Inget lager angivet"
#: eeschema/tools/sch_editor_control.cpp:1229
msgid "Net must be labeled to assign a netclass."
msgstr "Nätet måste märkas för att tilldela en nätklass."
#: eeschema/tools/sch_editor_control.cpp:1904
#, c-format
msgid ""
"The pasted sheet '%s'\n"
"was dropped because the destination already has the sheet or one of its "
"subsheets as a parent."
msgstr ""
"Det inklistrade bladet '%s'\n"
"släpptes eftersom destinationen redan har bladet eller ett av dess underblad "
"som förälder."
#: eeschema/tools/sch_editor_control.cpp:2288
msgid "Symbols with broken library symbol links cannot be edited."
msgstr ""
"Symboler som har trasiga länkar till symbolbibliotek kan inte redigeras."
#: eeschema/tools/sch_editor_control.cpp:2582
#: pcbnew/tools/board_editor_control.cpp:594
#: pcbnew/tools/footprint_editor_control.cpp:705
#, c-format
msgid "%d duplicate IDs replaced.\n"
msgstr "%d dubblett-ID ersatt.\n"
#: eeschema/tools/sch_editor_control.cpp:2589
#: pcbnew/tools/board_editor_control.cpp:609
#: pcbnew/tools/footprint_editor_control.cpp:720
#, c-format
msgid "%d potential problems repaired."
msgstr "%d potentiella problem har åtgärdats."
#: eeschema/tools/sch_editor_control.cpp:2596
#: pcbnew/drc/drc_rule_parser.cpp:179
msgid "No errors found."
msgstr "Inga fel hittades."
#: eeschema/tools/sch_line_wire_bus_tool.cpp:114
msgid "No bus selected"
msgstr "Ingen buss vald"
#: eeschema/tools/sch_line_wire_bus_tool.cpp:123
msgid "Bus has no members"
msgstr "Bus har inga medlemmar"
#: eeschema/tools/sch_line_wire_bus_tool.cpp:728
msgid "Press <ESC> to cancel drawing."
msgstr "Tryck på <ESC> för att avbryta ritning."
#: eeschema/tools/sch_move_tool.cpp:783
msgid "Press <ESC> to cancel drag."
msgstr "Tryck på <ESC> för att avbryta drag."
#: eeschema/tools/sch_move_tool.cpp:785
#: pagelayout_editor/tools/pl_edit_tool.cpp:217
msgid "Press <ESC> to cancel move."
msgstr "Tryck på <ESC> för att avbryta flytt."
#: eeschema/tools/sch_navigate_tool.cpp:80
#, c-format
msgid "Page '%d' not found."
msgstr "Sida '%d' hittades inte."
#: eeschema/tools/symbol_editor_control.cpp:180
msgid "No symbol library selected."
msgstr "Inget symbolbibliotek valt."
#: eeschema/tools/symbol_editor_control.cpp:331
#: pcbnew/tools/footprint_editor_control.cpp:396
msgid "New name:"
msgstr "Nytt namn:"
#: eeschema/tools/symbol_editor_control.cpp:331
msgid "Change Symbol Name"
msgstr "Ändra symbolnamn"
#: eeschema/tools/symbol_editor_control.cpp:341
msgid "Symbol name cannot be empty."
msgstr "Symbolnamnet kan inte vara tomt."
#: eeschema/tools/symbol_editor_control.cpp:529
#: eeschema/tools/symbol_editor_control.cpp:567
msgid "No symbol to export"
msgstr "Ingen symbol att exportera"
#: eeschema/tools/symbol_editor_control.cpp:538
msgid "Image File Name"
msgstr "Bildfilens namn"
#: eeschema/tools/symbol_editor_control.cpp:549
#, c-format
msgid "Can't save file '%s'."
msgstr "Kan inte spara filen '%s'."
#: eeschema/tools/symbol_editor_control.cpp:576
msgid "SVG File Name"
msgstr "SVG filnamn"
#: eeschema/tools/symbol_editor_edit_tool.cpp:635
msgid "Symbol is not derived from another symbol."
msgstr "Symbolen härrör inte från en annan symbol."
#: eeschema/tools/symbol_editor_edit_tool.cpp:663
#, c-format
msgid "Enter display name for unit %s"
msgstr "Ange visningsnamn för enhet %s"
#: eeschema/tools/symbol_editor_edit_tool.cpp:672
msgid "Set Unit Display Name"
msgstr "Sätt enhetens visningsnamn"
#: eeschema/tools/symbol_editor_pin_tool.cpp:236
#, c-format
msgid "This position is already occupied by another pin, in unit %d."
msgstr "Denna position är redan upptagen av ett annat stift, i enhet %d."
#: eeschema/tools/symbol_editor_pin_tool.cpp:240
msgid "Place Pin Anyway"
msgstr "Placera Pin ändå"
#: eeschema/widgets/filedlg_hook_save_project.h:32
#: eeschema/widgets/legacyfiledlg_save_project.h:34
msgid "Create a new project for this schematic"
msgstr "Skapa ett nytt projekt för detta schema"
#: eeschema/widgets/hierarchy_pane.cpp:275
msgid "Edit Page Number"
msgstr "Redigera sidnummer"
#: eeschema/widgets/hierarchy_pane.cpp:283
#, c-format
msgid "Enter page number for sheet path %s"
msgstr "Ange sidnummer för arksökväg %s"
#: eeschema/widgets/hierarchy_pane.cpp:322
#, c-format
msgid "(page %s)"
msgstr "(sida %s)"
#: eeschema/widgets/legacyfiledlg_save_project.h:36
msgid ""
"Creating a project will enable features such as text variables, net classes, "
"and ERC exclusions"
msgstr ""
"Skapandet av ett projekt aktiveras funktioner såsom textvariabler, "
"nätklasser och ERC-undantag"
#: eeschema/widgets/symbol_filedlg_save_as.h:33
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:37
msgid "Do not update library tables"
msgstr "Uppdatera inte bibliotekstabeller"
#: eeschema/widgets/symbol_filedlg_save_as.h:35
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:42
msgid "Update existing library table entry"
msgstr "Uppdatera befintlig post i bibliotekstabellen"
#: eeschema/widgets/symbol_filedlg_save_as.h:37
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:48
msgid "Add new global library table entry"
msgstr "Lägg till ny global post i bibliotektabellen"
#: eeschema/widgets/symbol_filedlg_save_as.h:39
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:54
msgid "Add new project library table entry"
msgstr "Lägg till en ny post i projektbiblioteket"
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:39
msgid "Do not perform any additional operations after saving library."
msgstr "Utför inga ytterligare åtgärder efter att du har sparat biblioteket."
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:43
msgid ""
"Update symbol library table entry to point to new library.\n"
"\n"
"The original library will no longer be available for use."
msgstr ""
"Uppdatera symbolbibliotekstabellens post till att peka på det nya "
"biblioteket.\n"
"\n"
"Det ursprungliga biblioteket kommer inte längre att vara tillgängligt för "
"användning."
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:49
#, fuzzy
msgid ""
"Add new entry to the global symbol library table.\n"
"\n"
"The symbol library table nickname is suffixed with\n"
"an integer to prevent duplicate table entries."
msgstr ""
"Lägg till ny post i den globala symbolbibliotekstabellen.\n"
"\n"
"Smeknamnet på symbolbibliotekets tabell är försett med\n"
"ett heltalssuffix för att förhindra dubbletter av tabellposter."
#: eeschema/widgets/symbol_legacyfiledlg_save_as.h:55
msgid ""
"Add new entry to the project symbol library table.\n"
"\n"
"The symbol library table nickname is suffixed with\n"
"an integer to prevent duplicate table entries."
msgstr ""
"Lägg till ny post i projektets symbolbibliotekstabell.\n"
"\n"
"Smeknamnet på symbolbibliotekets tabell är försett med\n"
"ett heltalssuffix för att förhindra dubbletter av tabellposter."
#: eeschema/widgets/tuner_slider.cpp:61
#, c-format
msgid "Symbol '%s' has simulation model of type '%s %s', which cannot be tuned"
msgstr ""
"Symbol '%s' har simulationsmodell av typ '%s %s', som inte kan justeras"
#: gerbview/clear_gbr_drawlayers.cpp:47
msgid "Current data will be lost?"
msgstr "Nuvarande data går förlorade?"
#: gerbview/clear_gbr_drawlayers.cpp:78
#, c-format
msgid "Clear layer %d?"
msgstr "Rensa lager %d?"
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:149
#, c-format
msgid "Layer %d"
msgstr "Skikt %d"
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:175
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:234
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:280
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:332
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:382
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:143
msgid "Do not export"
msgstr "Exportera inte"
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:221
msgid "Gerbers with known layers: "
msgstr "Gerbers med kända lager: "
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:223
msgid "Automatic Layer Assignment"
msgstr "Automatisk lagertilldelning"
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:337
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:390
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:135
msgid "Hole data"
msgstr "Håldata"
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:435
msgid ""
"Exported board does not have enough copper layers to handle selected inner "
"layers"
msgstr ""
"Exporterat mönsterkort har inte tillräckligt många kopparlager för att "
"hantera valda inre lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:32
msgid "Layer selection:"
msgstr "Lagval:"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:78
msgid "Copper layers count:"
msgstr "Kopparlager räknas:"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:82
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:83
msgid "2 Layers"
msgstr "2 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:84
msgid "4 Layers"
msgstr "4 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:85
msgid "6 Layers"
msgstr "6 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:86
msgid "8 Layers"
msgstr "8 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:87
msgid "10 Layers"
msgstr "10 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:88
msgid "12 Layers"
msgstr "12 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:89
msgid "14 Layers"
msgstr "14 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:90
msgid "16 Layers"
msgstr "16 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:91
msgid "18 Layers"
msgstr "18 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:92
msgid "20 Layers"
msgstr "20 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:93
msgid "22 Layers"
msgstr "22 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:94
msgid "24 Layers"
msgstr "24 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:95
msgid "26 Layers"
msgstr "26 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:96
msgid "28 Layers"
msgstr "28 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:97
msgid "30 Layers"
msgstr "30 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:98
msgid "32 Layers"
msgstr "32 lager"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:110
msgid "Store Choice"
msgstr "Butiksval"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:113
msgid "Get Stored Choice"
msgstr "Få lagrat val"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:116
#: pcbnew/dialogs/dialog_move_exact_base.cpp:35
#: pcbnew/dialogs/dialog_move_exact_base.cpp:49
#: pcbnew/dialogs/dialog_move_exact_base.cpp:63
#: pcbnew/dialogs/dialog_position_relative_base.cpp:81
#: pcbnew/dialogs/dialog_position_relative_base.cpp:98
msgid "Reset"
msgstr "Starta om"
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.h:79
msgid "Layer Selection"
msgstr "Skiktval"
#: gerbview/dialogs/dialog_print_gerbview.cpp:170
#: pcbnew/dialogs/dialog_export_svg_base.cpp:95
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:246
msgid "Print mirrored"
msgstr "Skriv ut spegelvänd"
#: gerbview/dialogs/dialog_print_gerbview.cpp:179
msgid "Included Layers"
msgstr "Inkluderade lager"
#: gerbview/dialogs/dialog_print_gerbview.cpp:193
msgid "Select all"
msgstr "Markera alla"
#: gerbview/dialogs/dialog_print_gerbview.cpp:195
msgid "Deselect all"
msgstr "Avmarkera alla"
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:92
#, c-format
msgid "Select Layer: %s"
msgstr "Välj lager: %s"
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:151
#: pcbnew/board_connected_item.cpp:161 pcbnew/board_connected_item.cpp:164
#: pcbnew/board_item.cpp:286
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:66
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:27
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:59
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:59
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:112
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:54
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:47
#: pcbnew/footprint.cpp:2860 pcbnew/footprint.cpp:2863 pcbnew/fp_text.cpp:302
#: pcbnew/fp_text_grid_table.cpp:106 pcbnew/fp_textbox.cpp:311
#: pcbnew/pad.cpp:974 pcbnew/pad.cpp:1729 pcbnew/pcb_bitmap.cpp:213
#: pcbnew/pcb_dimension.cpp:365 pcbnew/pcb_dimension.cpp:1093
#: pcbnew/pcb_marker.cpp:360 pcbnew/pcb_shape.cpp:311 pcbnew/pcb_shape.cpp:408
#: pcbnew/pcb_shape.cpp:410 pcbnew/pcb_target.cpp:153 pcbnew/pcb_text.cpp:136
#: pcbnew/pcb_textbox.cpp:305 pcbnew/pcb_track.cpp:837 pcbnew/pcb_track.cpp:911
#: pcbnew/pcb_track.cpp:1273 pcbnew/pcb_track.cpp:1280
#: pcbnew/tools/board_inspection_tool.cpp:199
#: pcbnew/tools/drawing_stackup_table_tool.cpp:213
#: pcbnew/tools/drawing_stackup_table_tool.cpp:224
#: pcbnew/widgets/pcb_properties_panel.cpp:181
#: pcbnew/widgets/pcb_properties_panel.cpp:182
#: pcbnew/widgets/pcb_properties_panel.cpp:186 pcbnew/zone.cpp:586
#: pcbnew/zone.cpp:1417 pcbnew/zone.cpp:1420
msgid "Layer"
msgstr "Lager"
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:100
#: gerbview/widgets/gerbview_layer_widget.cpp:130
msgid "DCodes"
msgstr "DC-koder"
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:101
#: gerbview/widgets/gerbview_layer_widget.cpp:132
msgid "Negative Objects"
msgstr "Negativa objekt"
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:109
#, c-format
msgid "Graphic Layer %d"
msgstr "Grafiklager %d"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:30
msgid "Show D codes"
msgstr "Visa D-koder"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:34
#: pcbnew/dialogs/panel_edit_options_base.cpp:387
msgid "Show page limits"
msgstr "Visa sidgränser"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:41
msgid "Drawing Mode"
msgstr "Ritningsläge"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:43
msgid "Sketch flashed items"
msgstr "Skissa fyllda objekt"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:46
msgid "Sketch lines"
msgstr "Skisslinjer"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:49
msgid "Sketch polygons"
msgstr "Skissa polygoner"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:58
msgid "Full size"
msgstr "Full storlek"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:58
msgid "Size A4"
msgstr "Storlek A4"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:58
msgid "Size A3"
msgstr "Storlek A3"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:58
msgid "Size A2"
msgstr "Storlek A2"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:58
msgid "Size A"
msgstr "Storlek A"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:58
msgid "Size B"
msgstr "Storlek B"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:58
msgid "Size C"
msgstr "Storlek C"
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:60
msgid "Page Size"
msgstr "Sidstorlek"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:18
msgid "File Format"
msgstr "Filformat"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:20
msgid "These parameters are usually specified in files, but not always."
msgstr "Dessa parametrar specificeras vanligtvis i filer, men inte alltid."
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:29
msgid "File units"
msgstr "Filenheter"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:33
msgid "No leading zeros (TZ format)"
msgstr "Inga inledande nollor (TZ-format)"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:33
msgid "No trailing zeros (LZ format)"
msgstr "Inga avslutande nollor (LZ-format)"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:35
msgid "Zero format"
msgstr "Nollformat"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:37
msgid ""
"Integers in files can have their zeros stripped.\n"
"No leading zeros format means the leading zeros are stripped\n"
"No trailing zeros format means the trailing zeros are stripped"
msgstr ""
"Heltal i filer kan få sina nollor bortkapade.\n"
"Format utan inledande nollor betyder att de inledande nollorna tas bort\n"
"Format utan avslutande nollor betyder att de avslutande nollorna tas bort"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:51
msgid "Coordinates Format"
msgstr "Koordinatformat"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:53
msgid "The coordinates format is not specified in Excellon format."
msgstr "Koordinatformatet är inte angett i Excellon-format."
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:57
msgid "(The decimal format does not use these settings)"
msgstr "(Decimalformatet använder inte dessa inställningar)"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:61
msgid "Usually: 3:3 in mm and 2:4 in inches"
msgstr "Vanligtvis: 3:3 i mm och 2:4 i tum"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:70
msgid "Format for mm"
msgstr "Format för millimeter"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:77
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:87
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:103
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:113
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:49
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:109
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:170
msgid "2"
msgstr "2"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:77
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:87
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:103
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:113
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:50
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:110
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:171
msgid "3"
msgstr "3"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:77
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:87
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:103
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:113
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
#: pcbnew/dialogs/dialog_create_array_base.cpp:267
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:51
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:111
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:172
msgid "4"
msgstr "4"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:77
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:87
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:103
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:113
#: pcbnew/dialogs/dialog_create_array_base.cpp:38
#: pcbnew/dialogs/dialog_create_array_base.cpp:45
#: pcbnew/dialogs/dialog_create_array_base.cpp:52
#: pcbnew/dialogs/dialog_create_array_base.cpp:63
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:52
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:112
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:173
msgid "5"
msgstr "5"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:77
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:87
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:103
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:113
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:53
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:113
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:174
msgid "6"
msgstr "6"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:83
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:109
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:392
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:448
msgid ":"
msgstr ":"
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:96
msgid "Format for inches"
msgstr "Format för tum"
#: gerbview/events_called_functions.cpp:182 gerbview/gerbview_frame.cpp:156
msgid "Layers Manager"
msgstr "Lagerhanterare"
#: gerbview/excellon_read_drill_file.cpp:270
#, c-format
msgid "File %s not found."
msgstr "Filen %s fanns ej."
#: gerbview/excellon_read_drill_file.cpp:282
msgid "No empty layers to load file into."
msgstr "Inga tomma lager att ladda filen i."
#: gerbview/excellon_read_drill_file.cpp:289
msgid "Error reading EXCELLON drill file"
msgstr "Fel vid läsning av EXCELLON-borrfil"
#: gerbview/excellon_read_drill_file.cpp:577
#, c-format
msgid "Unknown Excellon command <%s>"
msgstr "Okänt Excellon-kommando < %s >"
#: gerbview/excellon_read_drill_file.cpp:777
msgid "Tool definition shape not found"
msgstr "Verktygsdefinitionsform hittades inte"
#: gerbview/excellon_read_drill_file.cpp:780
#, c-format
msgid "Tool definition '%c' not supported"
msgstr "Verktygsdefinition '%c' stöds inte"
#: gerbview/excellon_read_drill_file.cpp:861
#, c-format
msgid "Tool %d not defined"
msgstr "Verktyg %d ej definierat"
#: gerbview/excellon_read_drill_file.cpp:1047
#, c-format
msgid "Unknown Excellon G Code: <%s>"
msgstr "Okänd Excellon G-kod: < %s >"
#: gerbview/files.cpp:43
msgid "<b>No more available layers</b> in GerbView to load files"
msgstr "<b> Slut på tillgängliga lager </b> för att ladda filer i GerbView"
#: gerbview/files.cpp:44
#, c-format
msgid "<b>Not loaded:</b> <i>%s</i>"
msgstr "<b>Ej inläst:</b> <i>%s</i>"
#: gerbview/files.cpp:45
#, c-format
msgid "<b>Memory was exhausted reading:</b> <i>%s</i>"
msgstr "<b>Slut på minne under inläsning:</b> <i>%s</i>"
#: gerbview/files.cpp:52 gerbview/files.cpp:202
msgid "Gerber files"
msgstr "Gerber-filer"
#: gerbview/files.cpp:88
msgid "Zip files"
msgstr "Zip-filer"
#: gerbview/files.cpp:105
msgid "Job files"
msgstr "Jobbfiler"
#: gerbview/files.cpp:182
msgid "Open Autodetected File(s)"
msgstr "Öppna automatiskt detekterad(e) fil(er)"
#: gerbview/files.cpp:205
msgid "Top layer"
msgstr "Topplager"
#: gerbview/files.cpp:206
msgid "Bottom layer"
msgstr "Bottenlager"
#: gerbview/files.cpp:207
msgid "Bottom solder resist"
msgstr "Lödmask undersida"
#: gerbview/files.cpp:208
msgid "Top solder resist"
msgstr "Lödmask ovansida"
#: gerbview/files.cpp:209
msgid "Bottom overlay"
msgstr "Overlay undersida"
#: gerbview/files.cpp:210
msgid "Top overlay"
msgstr "Overlay ovansida"
#: gerbview/files.cpp:211
msgid "Bottom paste"
msgstr "Lodpasta undersida"
#: gerbview/files.cpp:212
msgid "Top paste"
msgstr "Lodpasta ovansida"
#: gerbview/files.cpp:213
msgid "Keep-out layer"
msgstr "Keep-out-lager"
#: gerbview/files.cpp:214
msgid "Mechanical layers"
msgstr "Mekaniska lager"
#: gerbview/files.cpp:218
msgid "Top Pad Master"
msgstr "Lödyte-master ovansida"
#: gerbview/files.cpp:219
msgid "Bottom Pad Master"
msgstr "Lödyte-master undersida"
#: gerbview/files.cpp:225
msgid "Open Gerber File(s)"
msgstr "Öppna Gerber-fil(er)"
#: gerbview/files.cpp:236
msgid "Open NC (Excellon) Drill File(s)"
msgstr "Öppna NC (Excellon) borrfil (er)"
#: gerbview/files.cpp:274
msgid "File not found:"
msgstr "Filen hittades inte:"
#: gerbview/files.cpp:285
#, c-format
msgid "<b>A gerber job file cannot be loaded as a plot file</b> <i>%s</i>"
msgstr "<b> En Gerber-jobbfil kan inte laddas som en plotfil </b> <i> %s </i>"
#: gerbview/files.cpp:298
msgid "Loading files..."
msgstr "Läser in filer..."
#: gerbview/files.cpp:301 gerbview/files.cpp:308
#, c-format
msgid "Loading %u/%zu %s..."
msgstr "Laddar %u/%zu %s..."
#: gerbview/files.cpp:439
#, c-format
msgid "Zip file '%s' cannot be opened."
msgstr "Zip-filen '%s' kan inte öppnas."
#: gerbview/files.cpp:481
#, c-format
msgid "Skipped file '%s' (gerber job file)."
msgstr "Hoppade över fil '%s' (Gerber-jobbfil)."
#: gerbview/files.cpp:526
#, c-format
msgid "<b>Unable to create temporary file '%s'.</b>"
msgstr "<b>Kunde inte skapa temporär fil '%s'.</b>"
#: gerbview/files.cpp:551
#, c-format
msgid "Skipped file '%s' (unknown type)."
msgstr "Hoppade över fil '%s' (okänd typ)."
#: gerbview/files.cpp:590
#, c-format
msgid "<b>unzipped file %s read error</b>"
msgstr "<b>uppdackad fil %s läsfel </b>"
#: gerbview/files.cpp:638
msgid "Open Zip File"
msgstr "Öppna zip-fil"
#: gerbview/files.cpp:672 gerbview/job_file_reader.cpp:242
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:163
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:91
#: pcbnew/dialogs/dialog_gendrill_base.cpp:204
msgid "Messages"
msgstr "Meddelanden"
#: gerbview/gerber_draw_item.cpp:639
msgid "Attribute"
msgstr "Egenskaper"
#: gerbview/gerber_draw_item.cpp:642 gerbview/gerber_draw_item.cpp:652
msgid "No attribute"
msgstr "Inget attribut"
#: gerbview/gerber_draw_item.cpp:648
#, c-format
msgid "D Code %d"
msgstr "D-kod %d"
#: gerbview/gerber_draw_item.cpp:661
msgid "Graphic Layer"
msgstr "Grafiskt lager"
#: gerbview/gerber_draw_item.cpp:672
#: pagelayout_editor/dialogs/properties_frame_base.cpp:239
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:106
msgid "Position"
msgstr "Position"
#: gerbview/gerber_draw_item.cpp:677
msgid "Start"
msgstr "Start"
#: gerbview/gerber_draw_item.cpp:680
msgid "End"
msgstr "Slut"
#: gerbview/gerber_draw_item.cpp:691
msgid "Clear"
msgstr "Rensa"
#: gerbview/gerber_draw_item.cpp:692 gerbview/gerber_file_image.cpp:339
msgid "Polarity"
msgstr "Polaritet"
#: gerbview/gerber_draw_item.cpp:697 pcbnew/fp_text.cpp:304
#: pcbnew/fp_textbox.cpp:312 pcbnew/pcb_text.cpp:138 pcbnew/pcb_textbox.cpp:306
#: pcbnew/tools/edit_tool.cpp:1709
msgid "Mirror"
msgstr "Spegelvänd"
#: gerbview/gerber_draw_item.cpp:701
msgid "AB axis"
msgstr "AB-axel"
#: gerbview/gerber_draw_item.cpp:713 gerbview/toolbars_gerber.cpp:142
#: gerbview/toolbars_gerber.cpp:145
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:25
msgid "Net:"
msgstr "Nät:"
#: gerbview/gerber_draw_item.cpp:726
#, c-format
msgid "Cmp: %s Pad: %s"
msgstr "Komp: %s Lödyta: %s"
#: gerbview/gerber_draw_item.cpp:732
#, c-format
msgid "Cmp: %s Pad: %s Fct %s"
msgstr "Komp: %s Lödyta: %s Funkt: %s"
#: gerbview/gerber_draw_item.cpp:741 gerbview/toolbars_gerber.cpp:129
#: gerbview/toolbars_gerber.cpp:132
msgid "Cmp:"
msgstr "Komp:"
#: gerbview/gerber_draw_item.cpp:1000
#, c-format
msgid "%s (D%d) on layer %d: %s"
msgstr "%s (D %d) på skikt %d: %s"
#: gerbview/gerber_file_image.cpp:321
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:51
msgid "Format"
msgstr "Format"
#: gerbview/gerber_file_image.cpp:326
msgid "Image name"
msgstr "Bildnamn"
#: gerbview/gerber_file_image.cpp:331
msgid "Graphic layer"
msgstr "Grafiskt lager"
#: gerbview/gerber_file_image.cpp:335
msgid "Img Rot."
msgstr "Bildrot."
#: gerbview/gerber_file_image.cpp:343
msgid "X Justify"
msgstr "X Justering"
#: gerbview/gerber_file_image.cpp:346
msgid "Y Justify"
msgstr "Y Justering"
#: gerbview/gerber_file_image.cpp:352
msgid "Image Justify Offset"
msgstr "Bildjusteringsförskjutning"
#: gerbview/gerber_file_image_list.cpp:196
#, c-format
msgid "Graphic layer %d"
msgstr "Grafiskt lager %d"
#: gerbview/gerbview_frame.cpp:65 gerbview/menubar.cpp:135
#: gerbview/menubar.cpp:141
msgid "Clear Recent Zip Files"
msgstr "Rensa senaste zip-filer"
#: gerbview/gerbview_frame.cpp:67 gerbview/menubar.cpp:93
#: gerbview/menubar.cpp:99
msgid "Clear Recent Drill Files"
msgstr "Rensa senaste borrfiler"
#: gerbview/gerbview_frame.cpp:69 gerbview/menubar.cpp:113
#: gerbview/menubar.cpp:120
msgid "Clear Recent Job Files"
msgstr "Rensa senaste jobbfiler"
#: gerbview/gerbview_frame.cpp:86
#: resources/linux/launchers/org.kicad.gerbview.desktop.in:11
msgid "KiCad Gerber Viewer"
msgstr "KiCad Gerber-visare"
#: gerbview/gerbview_frame.cpp:616
msgid "Drawing layer not in use"
msgstr "Ritlager används inte"
#: gerbview/gerbview_frame.cpp:633
msgid "(with X2 attributes)"
msgstr "(med X2-attribut)"
#: gerbview/gerbview_frame.cpp:642
#, c-format
msgid "Image name: \"%s\" Layer name: \"%s\""
msgstr "Bildnamn: \"%s\" Skiktnamn: \"%s\""
#: gerbview/gerbview_frame.cpp:658
msgid "X2 attr"
msgstr "X2-attribut"
#: gerbview/job_file_reader.cpp:156
msgid "This job file uses an outdated format. Please recreate it."
msgstr "Den här jobbfilen använder ett föråldrat format. Snälla återskapa det."
#: gerbview/job_file_reader.cpp:192
msgid "Open Gerber Job File"
msgstr "Öppna Gerber-jobbfil"
#: gerbview/menubar.cpp:69 gerbview/menubar.cpp:76
msgid "Clear Recent Gerber Files"
msgstr "Rensa senaste Gerber-filer"
#: gerbview/menubar.cpp:75 gerbview/menubar.cpp:98
msgid "Open Recent Gerber File"
msgstr "Öppna Senaste Gerber-filen"
#: gerbview/menubar.cpp:89
msgid "Open Recent Drill File"
msgstr "Öppna senaste borrfil"
#: gerbview/menubar.cpp:119
msgid "Open Recent Job File"
msgstr "Öppna Senaste jobbfilen"
#: gerbview/menubar.cpp:140
msgid "Open Recent Zip File"
msgstr "Öppna Senaste zip-filen"
#: gerbview/readgerb.cpp:64
#, c-format
msgid "File '%s' not found"
msgstr "Fil '%s' hittades inte"
#: gerbview/readgerb.cpp:89
msgid ""
"Warning: this file has no D-Code definition\n"
"Therefore the size of some items is undefined"
msgstr ""
"Varning: den här filen har ingen D-koddefinition\n"
"Därför är storleken på vissa artiklar odefinierad"
#: gerbview/readgerb.cpp:92
msgid ""
"Warning: this file has some missing D-Code definitions\n"
"Therefore the size of some items is undefined"
msgstr ""
"Varning: den här filen har några D-koddefinitioner som saknas\n"
"Därför är storleken på vissa artiklar odefinierad"
#: gerbview/rs274d.cpp:413
msgid "Invalid Code Number"
msgstr "Ogiltigt kodnummer"
#: gerbview/rs274d.cpp:621
msgid "Invalid Gerber file: missing G74 or G75 arc command"
msgstr "Ogiltig Gerber-fil: saknar G74- eller G75-bågkommando"
#: gerbview/rs274x.cpp:230
#, c-format
msgid "RS274X: Invalid GERBER format command '%c' at line %d: \"%s\""
msgstr "RS274X: Ogiltigt GERBER-formatkommando '%c' vid rad %d: \"%s\""
#: gerbview/rs274x.cpp:233
#, c-format
msgid "GERBER file \"%s\" may not display as intended."
msgstr "GERBER-fil \"%s\" kanske inte visas som avsett."
#: gerbview/rs274x.cpp:541
msgid "RS274X: Command \"IR\" rotation value not allowed"
msgstr "RS274X: Rotationsvärde för kommando \"IR\" är inte tillåtet"
#: gerbview/rs274x.cpp:649
msgid "RS274X: Command KNOCKOUT ignored by GerbView"
msgstr "RS274X: Kommando KNOCKOUT ignoreras av GerbView"
#: gerbview/toolbars_gerber.cpp:131
msgid "Highlight items belonging to this component"
msgstr "Markera objekt som tillhör denna komponent"
#: gerbview/toolbars_gerber.cpp:144
msgid "Highlight items belonging to this net"
msgstr "Markera objekt som tillhör detta nät"
#: gerbview/toolbars_gerber.cpp:158 gerbview/toolbars_gerber.cpp:161
msgid "Attr:"
msgstr "Attribut:"
#: gerbview/toolbars_gerber.cpp:160
msgid "Highlight items with this aperture attribute"
msgstr "Markera objekt med detta bländarattribut"
#: gerbview/toolbars_gerber.cpp:174 gerbview/toolbars_gerber.cpp:176
msgid "DCode:"
msgstr "DC-kod:"
#: gerbview/toolbars_gerber.cpp:292
msgid "<No selection>"
msgstr "<Inget val>"
#: gerbview/tools/gerbview_actions.cpp:39
msgid "Open Autodetected File(s)..."
msgstr "Öppna automatiskt upptäckt(a) fil(er)..."
#: gerbview/tools/gerbview_actions.cpp:40
msgid "Open Autodetected file(s) on a new layer."
msgstr "Öppna automatiskt upptäckt(a) fil(er) på ett nytt lager..."
#: gerbview/tools/gerbview_actions.cpp:45
msgid "Open Gerber Plot File(s)..."
msgstr "Öppna Gerber-plotfil(er)..."
#: gerbview/tools/gerbview_actions.cpp:46
msgid "Open Gerber plot file(s) on a new layer."
msgstr "Öppna Gerberplot-fil(er) på ett nytt lager..."
#: gerbview/tools/gerbview_actions.cpp:51
msgid "Open Excellon Drill File(s)..."
msgstr "Öppna Excellon Drill File (s) ..."
#: gerbview/tools/gerbview_actions.cpp:52
msgid "Open Excellon drill file(s) on a new layer."
msgstr "Öppna Excellon-borrfil(er) på ett nytt lager."
#: gerbview/tools/gerbview_actions.cpp:57
msgid "Open Gerber Job File..."
msgstr "Öppna Gerber-jobbfil..."
#: gerbview/tools/gerbview_actions.cpp:58
msgid "Open a Gerber job file and its associated gerber plot files"
msgstr "Öppna en Gerber-jobbfil och tillhörande Gerber-plotfiler"
#: gerbview/tools/gerbview_actions.cpp:63
msgid "Open Zip Archive File..."
msgstr "Öppna Zip Archive File ..."
#: gerbview/tools/gerbview_actions.cpp:64
msgid "Open a zipped archive (Gerber and Drill) file"
msgstr "Öppna en zippad arkivfil (Gerber and Drill)"
#: gerbview/tools/gerbview_actions.cpp:69
msgid "Show Layers Manager"
msgstr "Visa lagerhanteraren"
#: gerbview/tools/gerbview_actions.cpp:70
msgid "Show or hide the layer manager"
msgstr "Visa eller dölj lagerhanteraren"
#: gerbview/tools/gerbview_actions.cpp:75
msgid "List DCodes..."
msgstr "Lista DC-koder ..."
#: gerbview/tools/gerbview_actions.cpp:76
msgid "List D-codes defined in Gerber files"
msgstr "Lista D-koder definierade i Gerber-filer"
#: gerbview/tools/gerbview_actions.cpp:81
msgid "Show Source..."
msgstr "Visa källa ..."
#: gerbview/tools/gerbview_actions.cpp:82
msgid "Show source file for the current layer"
msgstr "Visa källfil för det aktuella lagret"
#: gerbview/tools/gerbview_actions.cpp:87
msgid "Export to PCB Editor..."
msgstr "Exportera till mönsterkortsredigerare..."
#: gerbview/tools/gerbview_actions.cpp:88
msgid "Export data as a KiCad PCB file"
msgstr "Exportera data som en KiCad PCB-fil"
#: gerbview/tools/gerbview_actions.cpp:93
#: gerbview/widgets/gerbview_layer_widget.cpp:190
msgid "Clear Current Layer..."
msgstr "Rensa nuvarande lager ..."
#: gerbview/tools/gerbview_actions.cpp:93
msgid "Clear the selected graphic layer"
msgstr "Rensa det valda grafiska lagret"
#: gerbview/tools/gerbview_actions.cpp:98
msgid "Clear All Layers"
msgstr "Rensa alla lager"
#: gerbview/tools/gerbview_actions.cpp:99
msgid "Clear all layers. All data will be deleted"
msgstr "Rensa alla lager. All data kommer att raderas"
#: gerbview/tools/gerbview_actions.cpp:104
msgid "Reload All Layers"
msgstr "Ladda om alla lager"
#: gerbview/tools/gerbview_actions.cpp:105
msgid "Reload all layers. All data will be reloaded"
msgstr "Ladda om alla lager. All data laddas om"
#: gerbview/tools/gerbview_actions.cpp:114
msgid "Clear Highlight"
msgstr "Rensa Highlight"
#: gerbview/tools/gerbview_actions.cpp:124
msgid "Highlight Component"
msgstr "Markera komponent"
#: gerbview/tools/gerbview_actions.cpp:129
msgid "Highlight Attribute"
msgstr "Markera attribut"
#: gerbview/tools/gerbview_actions.cpp:134
msgid "Highlight DCode"
msgstr "Markera DCode"
#: gerbview/tools/gerbview_actions.cpp:140
msgid "Next Layer"
msgstr "Nästa lager"
#: gerbview/tools/gerbview_actions.cpp:145
msgid "Previous Layer"
msgstr "Föregående lager"
#: gerbview/tools/gerbview_actions.cpp:150
msgid "Move Layer Up"
msgstr "Flytta lager uppåt"
#: gerbview/tools/gerbview_actions.cpp:150
#: gerbview/widgets/gerbview_layer_widget.cpp:185
msgid "Move Current Layer Up"
msgstr "Flytta aktuellt lager uppåt"
#: gerbview/tools/gerbview_actions.cpp:156
msgid "Move Layer Down"
msgstr "Flytta lager neråt"
#: gerbview/tools/gerbview_actions.cpp:156
#: gerbview/widgets/gerbview_layer_widget.cpp:187
msgid "Move Current Layer Down"
msgstr "Flytta aktuellt lager nedåt"
#: gerbview/tools/gerbview_actions.cpp:162
msgid "Sketch Lines"
msgstr "Skissa linjer"
#: gerbview/tools/gerbview_actions.cpp:162
msgid "Show lines in outline mode"
msgstr "Visa rader i konturläge"
#: gerbview/tools/gerbview_actions.cpp:168
msgid "Sketch Flashed Items"
msgstr "Skissa fyllda objekt"
#: gerbview/tools/gerbview_actions.cpp:168
msgid "Show flashed items in outline mode"
msgstr "Visa blinkade objekt i konturläge"
#: gerbview/tools/gerbview_actions.cpp:174
msgid "Sketch Polygons"
msgstr "Skissa polygoner"
#: gerbview/tools/gerbview_actions.cpp:174
msgid "Show polygons in outline mode"
msgstr "Visa polygoner i konturläge"
#: gerbview/tools/gerbview_actions.cpp:180
msgid "Ghost Negative Objects"
msgstr "Dölj negativa objekt"
#: gerbview/tools/gerbview_actions.cpp:180
msgid "Show negative objects in ghost color"
msgstr "Visa negativa objekt i spökfärg"
#: gerbview/tools/gerbview_actions.cpp:186
msgid "Show DCodes"
msgstr "Visa DC-koder"
#: gerbview/tools/gerbview_actions.cpp:186
msgid "Show dcode number"
msgstr "Visa kodnummer"
#: gerbview/tools/gerbview_actions.cpp:191
msgid "Show in Differential Mode"
msgstr "Visa i differentiellt läge"
#: gerbview/tools/gerbview_actions.cpp:191
msgid "Show layers in differential compare mode"
msgstr "Visa lager i differentiellt jämförande läge"
#: gerbview/tools/gerbview_actions.cpp:196
msgid "Show in XOR Mode"
msgstr "Visa i XOR-läge"
#: gerbview/tools/gerbview_actions.cpp:196
msgid "Show layers in exclusive-or compare mode"
msgstr "Visa lager i exklusivt-eller jämförande läge"
#: gerbview/tools/gerbview_actions.cpp:201
msgid "Flip Gerber View"
msgstr "Spegelvänd Gerbervisning"
#: gerbview/tools/gerbview_actions.cpp:201
msgid "Show as mirror image"
msgstr "Visa som spegelbild"
#: gerbview/tools/gerbview_control.cpp:119
msgid "None of the Gerber layers contain any data"
msgstr "Inget av Gerber-lagren innehåller några data"
#: gerbview/tools/gerbview_control.cpp:126
msgid "Board File Name"
msgstr "Kortfilsnamn"
#: gerbview/tools/gerbview_inspection_tool.cpp:147
msgid "D Codes"
msgstr "D-koder"
#: gerbview/tools/gerbview_inspection_tool.cpp:175
#, c-format
msgid "Source file '%s' not found."
msgstr "Källfil '%s' hittades inte."
#: gerbview/tools/gerbview_inspection_tool.cpp:191
#, c-format
msgid "No file loaded on the active layer %d."
msgstr "Ingen fil laddad på det aktiva lagret %d."
#: gerbview/tools/gerbview_selection_tool.cpp:46
msgid "Highlight"
msgstr "Färgmarkering"
#: gerbview/tools/gerbview_selection_tool.cpp:68
#, c-format
msgid "Highlight Items of Component '%s'"
msgstr "Markera komponenter i komponenten '%s'"
#: gerbview/tools/gerbview_selection_tool.cpp:76
#, c-format
msgid "Highlight Items of Net '%s'"
msgstr "Markera objekt av nät '%s'"
#: gerbview/tools/gerbview_selection_tool.cpp:86
#, c-format
msgid "Highlight Aperture Type '%s'"
msgstr "Markera bländartyp '%s'"
#: gerbview/tools/gerbview_selection_tool.cpp:94
#, c-format
msgid "Highlight DCode D%d"
msgstr "Markera DCode D%d"
#: gerbview/widgets/gerbview_layer_widget.cpp:79
#: gerbview/widgets/layer_widget.cpp:535
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:253
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:314
#: pcbnew/dialogs/dialog_export_svg_base.cpp:45
#: pcbnew/dialogs/panel_setup_layers.cpp:813
#: pcbnew/widgets/appearance_controls.cpp:1004
#: pcbnew/widgets/appearance_controls_base.cpp:32
msgid "Layers"
msgstr "Lager"
#: gerbview/widgets/gerbview_layer_widget.cpp:80
#: gerbview/widgets/layer_widget.cpp:557
msgid "Items"
msgstr "Objekt"
#: gerbview/widgets/gerbview_layer_widget.cpp:131
msgid "Show DCodes identification"
msgstr "Visa DCodes-identifiering"
#: gerbview/widgets/gerbview_layer_widget.cpp:133
msgid "Show negative objects in this color"
msgstr "Visa negativa objekt i den här färgen"
#: gerbview/widgets/gerbview_layer_widget.cpp:136
#: pcbnew/widgets/appearance_controls.cpp:354
msgid "Show the (x,y) grid dots"
msgstr "Visa rutnätspunkter (x, y)"
#: gerbview/widgets/gerbview_layer_widget.cpp:138
msgid "Show drawing sheet border and title block"
msgstr "Visa ritningsarksram och namnruta"
#: gerbview/widgets/gerbview_layer_widget.cpp:140
msgid "Show drawing sheet page limits"
msgstr "Visa ritningsarkets sidgränser"
#: gerbview/widgets/gerbview_layer_widget.cpp:142
msgid "PCB Background"
msgstr "PCB-bakgrund"
#: gerbview/widgets/gerbview_layer_widget.cpp:161
#: pcbnew/widgets/appearance_controls.cpp:1794
msgid "Show All Layers"
msgstr "Visa alla lager"
#: gerbview/widgets/gerbview_layer_widget.cpp:165
#: pcbnew/widgets/appearance_controls.cpp:1781
msgid "Hide All Layers But Active"
msgstr "Dölj alla lager men aktiva"
#: gerbview/widgets/gerbview_layer_widget.cpp:169
msgid "Always Hide All Layers But Active"
msgstr "Dölj alltid alla lager men aktiva"
#: gerbview/widgets/gerbview_layer_widget.cpp:172
#: pcbnew/widgets/appearance_controls.cpp:1797
msgid "Hide All Layers"
msgstr "Dölj alla lager"
#: gerbview/widgets/gerbview_layer_widget.cpp:177
msgid "Sort Layers if X2 Mode"
msgstr "Sortera lager om X2-läge"
#: gerbview/widgets/gerbview_layer_widget.cpp:180
msgid "Sort Layers by File Extension"
msgstr "Sortera lager efter filnamnstillägg"
#: gerbview/widgets/layer_widget.cpp:130
msgid "Change Layer Color for"
msgstr "Ändra lagerfärg för"
#: gerbview/widgets/layer_widget.cpp:186
msgid "Change Render Color for"
msgstr "Ändra Render Color för"
#: gerbview/widgets/layer_widget.cpp:340
#: pcbnew/widgets/appearance_controls.cpp:2104
#: pcbnew/widgets/appearance_controls.cpp:2346
msgid ""
"Left double click or middle click for color change, right click for menu"
msgstr ""
"Vänster dubbelklicka eller mittklick för färgbyte, högerklicka för meny"
#: gerbview/widgets/layer_widget.cpp:350
msgid "Enable this for visibility"
msgstr "Aktivera detta för synlighet"
#: gerbview/widgets/layer_widget.cpp:445
msgid "Left double click or middle click for color change"
msgstr "Vänster dubbelklick eller mittklick för att ändra färg"
#: include/dialogs/panel_color_settings.h:50
msgid "Reset all colors in this theme to the KiCad defaults"
msgstr "Återställ alla färger i detta tema till KiCad standardfärger"
#: include/kiway_player.h:228
msgid "This file is already open."
msgstr "Den här filen är redan öppen."
#: include/libeval_compiler/libeval_compiler.h:342
msgid "Malformed expression"
msgstr "Felaktigt uttryckt"
#: include/panel_hotkeys_editor.h:55
msgid "Reset all hotkeys to the built-in KiCad defaults"
msgstr "Återställ alla snabbtangenter till de inbyggda KiCad-standardvärdena"
#: include/project.h:42
msgid "untitled"
msgstr "namnlös"
#: include/stroke_params.h:81
msgid "Leave unchanged"
msgstr "Lämna oförändrad"
#: include/widgets/resettable_panel.h:66
msgid "Reset all settings on this page to their default"
msgstr "Återställ alla inställningar på den här sidan till standardvärden"
#: include/widgets/ui_common.h:42
msgid "-- mixed values --"
msgstr "- blandade värden -"
#: include/widgets/wx_infobar.h:118
msgid "Hide this message."
msgstr "Dölj detta meddelande."
#: include/wxstream_helper.h:49
msgid "Failed to output data"
msgstr "Misslyckades med utmatning av data"
#: kicad/cli/command.h:32
msgid "shows help message and exits"
msgstr ""
#: kicad/cli/command_export_pcb_base.cpp:39
#: kicad/cli/command_export_pcb_step.cpp:87
msgid "Output file name"
msgstr "Filnamn för utmatning"
#: kicad/cli/command_export_pcb_base.cpp:41
#: kicad/cli/command_export_pcb_step.cpp:89
msgid "Input file"
msgstr "Inmatningsfil"
#: kicad/cli/command_export_pcb_base.cpp:82
#, c-format
msgid "Invalid layer name \"%s\"\n"
msgstr "Ogiltigt lagernamn \"%s\"\n"
#: kicad/cli/command_export_pcb_base.cpp:96
msgid ""
"Comma separated list of untranslated layer names to include such as F.Cu,B.Cu"
msgstr ""
"Kommaseparerad lista av icke översatta namn på lager att inkludera, så som F."
"Cu,B.Cu"
#: kicad/cli/command_export_pcb_base.cpp:113
msgid "At least one or more layers must be specified\n"
msgstr "Minst ett eller flera lager måste specificeras\n"
#: kicad/cli/command_export_pcb_drill.cpp:47
msgid "Valid options excellon, gerber."
msgstr "Giltiga alternativ är: excellon, gerber."
#: kicad/cli/command_export_pcb_drill.cpp:52
msgid "Valid options are: decimal,suppressleading,suppresstrailing,keep."
msgstr "Giltiga alternativ är: decimal,suppressleading,suppresstrailing,keep."
#: kicad/cli/command_export_pcb_drill.cpp:56
msgid "Valid options are: absolute,plot"
msgstr "Giltiga alternativ är: absolute,plot"
#: kicad/cli/command_export_pcb_drill.cpp:60
msgid "Output units, valid options:in,mm"
msgstr "Utmatningens måttenhet; giltiga alternativ: in,mm"
#: kicad/cli/command_export_pcb_drill.cpp:63
#: pcbnew/dialogs/dialog_gendrill_base.cpp:52
msgid "Mirror Y axis"
msgstr "Spegelvänd Y-axel"
#: kicad/cli/command_export_pcb_drill.cpp:68
#: pcbnew/dialogs/dialog_gendrill_base.cpp:57
msgid "Minimal header"
msgstr "Minimal header"
#: kicad/cli/command_export_pcb_drill.cpp:73
msgid "PTH and NPTH in separate files file"
msgstr "PTH och NPTH i separata filer fil"
#: kicad/cli/command_export_pcb_drill.cpp:78
msgid "Generate map / summary of drill hits"
msgstr "Generera karta / översikt över borrträffar"
#: kicad/cli/command_export_pcb_drill.cpp:84
msgid "Valid options: pdf,gerberx2,ps,dxf,svg"
msgstr "Giltiga alternativ: pdf,gerberx2,ps,dxf,svg"
#: kicad/cli/command_export_pcb_drill.cpp:87
msgid "Generate independent files for NPTH and PTH holes"
msgstr "Generera separata filer för NPTH och PTH-hål"
#: kicad/cli/command_export_pcb_drill.cpp:92
msgid "Precision of gerber coordinates (5 or 6)"
msgstr "Gerberkoordinaternas precision (5 eller 6)"
#: kicad/cli/command_export_pcb_drill.cpp:109
msgid "Output must be a directory\n"
msgstr "Utmatning måste vara en mapp\n"
#: kicad/cli/command_export_pcb_drill.cpp:125
msgid "Invalid drill format\n"
msgstr "Ogiltigt borrformat\n"
#: kicad/cli/command_export_pcb_drill.cpp:141
#: kicad/cli/command_export_pcb_dxf.cpp:97
#: kicad/cli/command_export_pcb_pos.cpp:140
msgid "Invalid units specified\n"
msgstr "Ogiltiga enheter specificerade\n"
#: kicad/cli/command_export_pcb_drill.cpp:165
msgid "Invalid zeros format specified\n"
msgstr "Ogiltigt nollformat specificerat\n"
#: kicad/cli/command_export_pcb_drill.cpp:193
msgid "Invalid map format specified\n"
msgstr "Ogiltigt kartformat specificerat\n"
#: kicad/cli/command_export_pcb_drill.cpp:209
msgid "Invalid origin mode specified\n"
msgstr "Ogiltigt origo-läge specificerat\n"
#: kicad/cli/command_export_pcb_drill.cpp:220
#: kicad/cli/command_export_pcb_gerber.cpp:109
msgid "Gerber coordinate precision should be either 5 or 6\n"
msgstr "Gerberkoordinaternas precision skall vara antingen 5 eller 6\n"
#: kicad/cli/command_export_pcb_dxf.cpp:44
#: kicad/cli/command_export_pcb_gerber.cpp:40
#: kicad/cli/command_export_pcb_pdf.cpp:39
msgid "Include the reference designator text"
msgstr "Inkludera text för referensbeteckningar"
#: kicad/cli/command_export_pcb_dxf.cpp:49
#: kicad/cli/command_export_pcb_gerber.cpp:45
#: kicad/cli/command_export_pcb_pdf.cpp:44
msgid "Include the value text"
msgstr "Inkludera text för värde"
#: kicad/cli/command_export_pcb_dxf.cpp:54
#: pcbnew/dialogs/dialog_plot_base.cpp:326
msgid "Plot graphic items using their contours"
msgstr "Plotta grafiska objekt med deras konturer"
#: kicad/cli/command_export_pcb_dxf.cpp:60
msgid "Output units, valid options: mm, in"
msgstr "Utmatningens måttenhet; giltiga alternativ: mm, in"
#: kicad/cli/command_export_pcb_dxf.cpp:77
#: kicad/cli/command_export_pcb_gerber.cpp:103
#: kicad/cli/command_export_pcb_pdf.cpp:78
#: kicad/cli/command_export_pcb_pos.cpp:99
#: kicad/cli/command_export_pcb_svg.cpp:88
msgid "Board file does not exist or is not accessible\n"
msgstr "Mönsterkortsfil existerar inte eller är inte tillgänglig\n"
#: kicad/cli/command_export_pcb_gerber.cpp:50
#: kicad/cli/command_export_pcb_pdf.cpp:49
msgid "Include the border and title block"
msgstr "Inkludera ram och namnruta"
#: kicad/cli/command_export_pcb_gerber.cpp:55
msgid "Do not use the extended X2 format"
msgstr "Använd inte utökat X2-format"
#: kicad/cli/command_export_pcb_gerber.cpp:60
msgid "Do not generate netlist attributes"
msgstr "Generera inte nätlisteattribut"
#: kicad/cli/command_export_pcb_gerber.cpp:65
#: pcbnew/dialogs/dialog_plot_base.cpp:208
msgid "Subtract soldermask from silkscreen"
msgstr "Subtrahera lödmask från anvisningstryck"
#: kicad/cli/command_export_pcb_gerber.cpp:70
msgid "Disable aperature macros"
msgstr "Inaktivera bländarmakron"
#: kicad/cli/command_export_pcb_gerber.cpp:75
msgid "Precision of gerber coordinates, valid options: 5 or 6"
msgstr "Gerberkoordinaternas precision; giltiga alternativ: 5 eller 6"
#: kicad/cli/command_export_pcb_gerbers.cpp:44
msgid ""
"Layers to include on each plot, comma separated list of untranslated layer "
"names to include such as F.Cu,B.Cu"
msgstr ""
"Lager att inkludera i varje plott; kommaseparerad lista av icke översatta "
"namn på lager att inkludera, så som F.Cu,B.Cu"
#: kicad/cli/command_export_pcb_gerbers.cpp:48
msgid "Use the gerber plot settings already configured in the board file"
msgstr ""
"Använd inställningar för gerber-plottning som redan är definierade i "
"mönsterkortsfilen"
#: kicad/cli/command_export_pcb_pdf.cpp:54
#: kicad/cli/command_export_pcb_svg.cpp:52
#: kicad/cli/command_export_sch_pdf.cpp:41
#: kicad/cli/command_export_sch_svg.cpp:41
#: kicad/cli/command_fp_export_svg.cpp:45
#: kicad/cli/command_sym_export_svg.cpp:45
msgid "Black and white only"
msgstr "Endast svartvitt"
#: kicad/cli/command_export_pcb_pdf.cpp:61
#: kicad/cli/command_export_pcb_svg.cpp:49
#: kicad/cli/command_export_sch_pdf.cpp:38
#: kicad/cli/command_export_sch_svg.cpp:38
#: kicad/cli/command_fp_export_svg.cpp:38
#: kicad/cli/command_sym_export_svg.cpp:38
msgid "Color theme to use (will default to pcbnew settings)"
msgstr ""
"Färgschema som kommer att användas (om inget annat väljs används "
"inställningarna i pcbnew)"
#: kicad/cli/command_export_pcb_pos.cpp:47
msgid "Valid options: front,back,both. Gerber format only supports \"both\"."
msgstr ""
"Giltiga alternativ: front,back,both. Gerber-formatet stödjer bara \"both\"."
#: kicad/cli/command_export_pcb_pos.cpp:51
msgid "Valid options: ascii,csv,gerber"
msgstr "Giltiga alternativ: ascii,csv,gerber"
#: kicad/cli/command_export_pcb_pos.cpp:55
msgid "Output units; ascii or csv format only; valid options: in,mm"
msgstr ""
"Utmatningens måttenhet; endast ascii eller csv-format; giltiga alternativ: "
"in,mm"
#: kicad/cli/command_export_pcb_pos.cpp:58
msgid ""
"Use negative X coordinates for footprints on bottom layer (ascii or csv "
"formats only)"
msgstr ""
"Använd negativa X-koordinater för fotavtryck på baksidans lager (endast "
"ascii eller csv-format)"
#: kicad/cli/command_export_pcb_pos.cpp:64
msgid "Use drill/place file origin (ascii or csv only)"
msgstr "Använd borr-/placeringsfilens origo (endast ascii- eller csv-format)"
#: kicad/cli/command_export_pcb_pos.cpp:69
msgid "Include only SMD footprints (ascii or csv only)"
msgstr "Inkludera bara ytmonterade fotavtryck (endast ascii eller csv)"
#: kicad/cli/command_export_pcb_pos.cpp:75
msgid "Exclude all footprints with through-hole pads (ascii or csv only)"
msgstr ""
"Uteslut alla fotavtryck med hålmonterings-lödytor (endast ascii eller csv)"
#: kicad/cli/command_export_pcb_pos.cpp:80
msgid "Include board edge layer (gerber only)"
msgstr "Inkludera lager för mönsterkortets kantlinjer (endast gerber)"
#: kicad/cli/command_export_pcb_pos.cpp:124
#: kicad/cli/command_export_sch_netlist.cpp:81
msgid "Invalid format\n"
msgstr "Ogiltigt format\n"
#: kicad/cli/command_export_pcb_pos.cpp:150
msgid "\"both\" not supported for gerber format\n"
msgstr "\"both\" stöds inte för gerber-format\n"
#: kicad/cli/command_export_pcb_pos.cpp:166
msgid "Invalid side specified\n"
msgstr "Ogiltig sida specificerad\n"
#: kicad/cli/command_export_pcb_step.cpp:48
msgid "Use Drill Origin for output origin"
msgstr "Använd borr-origo som utmatningens origo"
#: kicad/cli/command_export_pcb_step.cpp:53
msgid "Use Grid Origin for output origin"
msgstr "Använd rutnäts-origo som utmatningens origo"
#: kicad/cli/command_export_pcb_step.cpp:58
msgid "Exclude 3D models for components with 'virtual' attribute"
msgstr "Exkludera 3D-modeller för komponenter med attributet 'virtuell'"
#: kicad/cli/command_export_pcb_step.cpp:63
msgid ""
"Substitute STEP or IGS models with the same name in place of VRML models"
msgstr ""
"Substituera STEP eller IGS-modeller med samma namn istället för VRML-modeller"
#: kicad/cli/command_export_pcb_step.cpp:68
msgid "Overwrite output file"
msgstr "Skriv över utmatningsfil"
#: kicad/cli/command_export_pcb_step.cpp:73
msgid "Only generate a board with no components"
msgstr "Generera endast mönsterkort utan komponenter"
#: kicad/cli/command_export_pcb_step.cpp:79
msgid "Minimum distance between points to treat them as separate ones"
msgstr "Minsta avstånd mellan punkter för att behandla dem som separata"
#: kicad/cli/command_export_pcb_step.cpp:83
msgid ""
"User-specified output origin ex. 1x1in, 1x1inch, 25.4x25.4mm (default unit "
"mm)"
msgstr ""
"Användardefinierat utmatnings-origo, t.ex. 1x1in, 1x1inch, 25.4x25.4mm "
"(förinställd enhet mm)"
#: kicad/cli/command_export_pcb_svg.cpp:43
msgid "Mirror the board (useful for trying to show bottom layers)"
msgstr ""
"Spegelvänd mönsterkortet (användbart för att försöka visa undersidans lager)"
#: kicad/cli/command_export_pcb_svg.cpp:57
msgid ""
"Set page sizing mode (0 = page with frame and title block, 1 = current page "
"size, 2 = board area only)"
msgstr ""
"Ställ in läge för sidstorlek (0 = sida med ram och titelblock, 1 = nuvarande "
"sidstorlek, 2 = endast mönsterkortsyta)"
#: kicad/cli/command_export_pcb_svg.cpp:63
#: kicad/cli/command_export_sch_pdf.cpp:46
#: kicad/cli/command_export_sch_svg.cpp:46
msgid "No drawing sheet"
msgstr "Inget ritningsark"
#: kicad/cli/command_export_sch_netlist.cpp:36
msgid ""
"Netlist output format, valid options: kicadsexpr, kicadxml, cadstar, "
"orcadpcb2, spice, spicemodel"
msgstr ""
"Nätlistans utmatningsformat; giltiga alternativ: kicadsexpr, kicadxml, "
"cadstar, orcadpcb2, spice, spicemodel"
#: kicad/cli/command_export_sch_netlist.cpp:50
#: kicad/cli/command_export_sch_pdf.cpp:69
#: kicad/cli/command_export_sch_pythonbom.cpp:47
#: kicad/cli/command_export_sch_svg.cpp:69
msgid "Schematic file does not exist or is not accessible\n"
msgstr "Kretsschemafil finns inte eller är inte tillgänglig\n"
#: kicad/cli/command_export_sch_pdf.cpp:51
#: kicad/cli/command_export_sch_svg.cpp:51
msgid "Avoid setting a background color (regardless of theme)"
msgstr "Undvik att ställa in en bakgrundsfärg (oavsett tema)"
#: kicad/cli/command_fp_export_svg.cpp:42
#: kicad/cli/command_sym_export_svg.cpp:42
msgid "Specific symbol to export within the library"
msgstr "Specifik symbol som skall exporteras från biblioteket"
#: kicad/cli/command_fp_export_svg.cpp:62
msgid "Footprint library does not exist or is not accessible\n"
msgstr "Fotavtrycksbibliotek existerar inte eller är inte tillgängligt\n"
#: kicad/cli/command_fp_upgrade.cpp:37
msgid "Forces the footprint library to be resaved regardless of versioning"
msgstr "Tvingar att spara om fotavtrycksbiblioteket oberoende av version"
#: kicad/cli/command_fp_upgrade.cpp:53
msgid "Footprint path does not exist or is not accessible\n"
msgstr "Fotavtryckets sökväg existerar inte eller är inte tillgänglig\n"
#: kicad/cli/command_sym_export_svg.cpp:62 kicad/cli/command_sym_upgrade.cpp:53
msgid "Symbol file does not exist or is not accessible\n"
msgstr "Symbolfil existerar inte eller är inte tillgänglig\n"
#: kicad/cli/command_sym_upgrade.cpp:37
msgid "Forces the symbol library to be resaved regardless of versioning"
msgstr "Tvingar symbolbiblioteket att sparas om oberoende av version"
#: kicad/dialogs/dialog_template_selector.cpp:149
msgid "<h1>Template Selector</h1>"
msgstr "<h1>Mallväljare</h1>"
#: kicad/dialogs/dialog_template_selector.cpp:254
msgid "Select Templates Directory"
msgstr "Välj Mallkatalog"
#: kicad/dialogs/dialog_template_selector_base.cpp:24
msgid "Folder:"
msgstr "Mapp:"
#: kicad/dialogs/dialog_template_selector_base.cpp:129
msgid "Project Template Title"
msgstr "Projektmallens titel"
#: kicad/dialogs/dialog_template_selector_base.h:69
msgid "Project Template Selector"
msgstr "Projektmallväljare"
#: kicad/dialogs/panel_kicad_launcher.cpp:130
msgid "Edit the project schematic"
msgstr "Redigera projektets kretsschema"
#: kicad/dialogs/panel_kicad_launcher.cpp:134
msgid "Edit global and/or project schematic symbol libraries"
msgstr ""
"Redigera kretsschemasymboler i globala och/eller projektspecifika "
"symbolbibliotek"
#: kicad/dialogs/panel_kicad_launcher.cpp:138
msgid "Edit the project PCB design"
msgstr "Redigera projektets mönsterkortsdesign"
#: kicad/dialogs/panel_kicad_launcher.cpp:142
msgid "Edit global and/or project PCB footprint libraries"
msgstr ""
"Redigera komponentfotavtryck i globala och/eller projektspecifika "
"fotavtrycksbibliotek"
#: kicad/dialogs/panel_kicad_launcher.cpp:146
msgid "Preview Gerber files"
msgstr "Förhandsvisa Gerber-filer"
#: kicad/dialogs/panel_kicad_launcher.cpp:150
msgid "Convert bitmap images to schematic symbols or PCB footprints"
msgstr ""
"Konvertera bitmappsbilder till kretsschemasymboler eller fotavtryck för "
"mönsterkort"
#: kicad/dialogs/panel_kicad_launcher.cpp:154
msgid "Show tools for calculating resistance, current capacity, etc."
msgstr "Visa verktyg för beräkning av motstånd, strömkapacitet etc."
#: kicad/dialogs/panel_kicad_launcher.cpp:158
msgid ""
"Edit drawing sheet borders and title blocks for use in schematics and PCB "
"designs"
msgstr ""
"Redigera ramar och namnrutor på ritningsark som används för kretsscheman och "
"mönsterkortsdesign"
#: kicad/dialogs/panel_kicad_launcher.cpp:164
msgid "Manage downloadable packages from KiCad and 3rd party repositories"
msgstr "Hantera nedladdningsbara paket från KiCad och 3:e parts repositories"
#: kicad/files-io.cpp:46
msgid "KiCad project file"
msgstr "KiCad projektfil"
#: kicad/files-io.cpp:66
msgid "Unzip Project"
msgstr "Packa upp projektet"
#: kicad/files-io.cpp:73
#, c-format
msgid ""
"\n"
"Open '%s'\n"
msgstr ""
"\n"
"Öppna '%s'\n"
#: kicad/files-io.cpp:76
msgid "Target Directory"
msgstr "Målkatalog"
#: kicad/files-io.cpp:82
#, c-format
msgid "Unzipping project in '%s'.\n"
msgstr "Packar upp projektet i '%s'\n"
#: kicad/files-io.cpp:117
msgid "Archive Project Files"
msgstr "Arkivera projektfiler"
#: kicad/import_proj.cpp:148
#, c-format
msgid ""
"Cannot copy file '%s'\n"
"to '%s'\n"
"The project cannot be imported."
msgstr ""
"Det går inte att kopiera filen '%s'\n"
"till '%s'\n"
"Projektet kan inte importeras."
#: kicad/import_project.cpp:68
msgid "KiCad Project Destination"
msgstr "KiCad-projektdestination"
#: kicad/import_project.cpp:84
msgid ""
"The selected directory is not empty. We recommend you create projects in "
"their own clean directory.\n"
"\n"
"Do you want to create a new empty directory for the project?"
msgstr ""
"Den valda katalogen är inte tom. Vi rekommenderar att du skapar projekt i "
"sin egen rena katalog.\n"
"\n"
"Vill du skapa en ny tom katalog för projektet?"
#: kicad/import_project.cpp:99
msgid ""
"Error creating new directory. Please try a different path. The project "
"cannot be imported."
msgstr ""
"Fel vid skapande av ny katalog. Vänligen, försök med en annan sökväg. "
"Projektet kan inte importeras."
#: kicad/import_project.cpp:128
msgid "Import CADSTAR Archive Project Files"
msgstr "Importera CADSTAR-arkivprojektfiler"
#: kicad/import_project.cpp:136
msgid "Import Eagle Project Files"
msgstr "Importera Eagle Project-filer"
#: kicad/kicad.cpp:311
#, c-format
msgid ""
"File '%s'\n"
"does not appear to be a valid KiCad project file."
msgstr ""
"Filen '%s'\n"
"verkar inte vara en giltig KiCad projektfil."
#: kicad/kicad_cli.cpp:284
msgid "prints version information and exits"
msgstr ""
#: kicad/kicad_manager_frame.cpp:210
msgid "Project Files"
msgstr "Projektfiler"
#: kicad/kicad_manager_frame.cpp:214
msgid "Editors"
msgstr "Redigerare"
#: kicad/kicad_manager_frame.cpp:704
msgid "Load File to Edit"
msgstr "Ladda fil för redigering"
#: kicad/kicad_manager_frame.cpp:778
msgid "[no project loaded]"
msgstr "[inget projekt laddat]"
#: kicad/kicad_manager_frame.cpp:818
#, c-format
msgid "Project: %s"
msgstr "Projekt: %s"
#: kicad/kicad_manager_frame.cpp:862
msgid "Restoring session"
msgstr "Återställ session"
#: kicad/kicad_manager_frame.cpp:872
#, c-format
msgid "Restoring '%s'"
msgstr "Återställer '%s'"
#: kicad/kicad_manager_frame.cpp:900
msgid "Would you like to automatically check for plugin updates on startup?"
msgstr ""
"Vill du automatiskt söka efter uppdateringar för insticksmoduler vid "
"uppstart?"
#: kicad/kicad_manager_frame.cpp:901
msgid "Check for updates"
msgstr "Sök efter uppdateringar"
#: kicad/menubar.cpp:58
msgid "Clear Recent Projects"
msgstr "Rensa senaste projekt"
#: kicad/menubar.cpp:103
msgid "Import Non-KiCad Project..."
msgstr "Importera icke-KiCad-projekt ..."
#: kicad/menubar.cpp:106
msgid "CADSTAR Project..."
msgstr "CADSTAR-projekt..."
#: kicad/menubar.cpp:107
msgid "Import CADSTAR Archive Schematic and PCB (*.csa, *.cpa)"
msgstr "Importera CADSTAR-arkivschemat och PCB (*.csa, *.cpa)"
#: kicad/menubar.cpp:111
msgid "EAGLE Project..."
msgstr "EAGLE-projekt..."
#: kicad/menubar.cpp:112
msgid "Import EAGLE CAD XML schematic and board"
msgstr "Importera EAGLE CAD XML-schemat och kort"
#: kicad/menubar.cpp:119
msgid "&Archive Project..."
msgstr "& Arkivera projektfiler..."
#: kicad/menubar.cpp:120
msgid "Archive all needed project files into zip archive"
msgstr "Arkivera alla projektfiler som behövs i zip-arkivet"
#: kicad/menubar.cpp:124
msgid "&Unarchive Project..."
msgstr "&Packa upp arkiverat projekt..."
#: kicad/menubar.cpp:125 kicad/menubar.cpp:252
msgid "Unarchive project files from zip archive"
msgstr "Packa upp arkiverat projekt från zip-arkiv"
#: kicad/menubar.cpp:153
msgid "Browse Project Files"
msgstr "Bläddra i projektfiler"
#: kicad/menubar.cpp:154
msgid "Open project directory in file browser"
msgstr "Öppna projektkatalogen i filbläddraren"
#: kicad/menubar.cpp:187
msgid "Edit Local File..."
msgstr "Redigera lokal fil ..."
#: kicad/menubar.cpp:188
msgid "Edit local file in text editor"
msgstr "Redigera lokal fil i textredigeraren"
#: kicad/menubar.cpp:248
msgid "Archive all project files"
msgstr "Arkivera alla projektfiler"
#: kicad/menubar.cpp:261
msgid "Reveal project folder in Finder"
msgstr "Avslöja projektmappen i Finder"
#: kicad/menubar.cpp:263
msgid "Open project directory in file explorer"
msgstr "Öppna projektkatalogen i filutforskaren"
#: kicad/pcm/dialogs/dialog_manage_repositories.cpp:53
#, fuzzy
msgid "Add Default Repository"
msgstr "Lägg till förvalt repository"
#: kicad/pcm/dialogs/dialog_manage_repositories.cpp:96
msgid "Please enter fully qualified repository url"
msgstr "Ange en fullt kvalificerad repository-länk"
#: kicad/pcm/dialogs/dialog_manage_repositories.cpp:97
msgid "Add repository"
msgstr "Lägg till repository"
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:58
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:134
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:135
msgid "Add Existing"
msgstr "Lägg till befintlig"
#: kicad/pcm/dialogs/dialog_manage_repositories_base.h:62
msgid "Manage Repositories"
msgstr "Hantera repository"
#: kicad/pcm/dialogs/dialog_pcm.cpp:50
#, c-format
msgid "Plugins (%d)"
msgstr "Insticksmoduler (%d)"
#: kicad/pcm/dialogs/dialog_pcm.cpp:51
#, c-format
msgid "Libraries (%d)"
msgstr "Bibliotek (%d)"
#: kicad/pcm/dialogs/dialog_pcm.cpp:52
#, c-format
msgid "Color themes (%d)"
msgstr "Färgteman (%d)"
#: kicad/pcm/dialogs/dialog_pcm.cpp:75
#, c-format
msgid "Are you sure you want to update pinned package from version %s to %s?"
msgstr ""
"Är du säker på att du vill uppdatera fastnålat paket från version %s till %s?"
#: kicad/pcm/dialogs/dialog_pcm.cpp:78
msgid "Confirm update"
msgstr "Bekräfta uppdatering"
#: kicad/pcm/dialogs/dialog_pcm.cpp:99 kicad/pcm/dialogs/panel_package.cpp:97
#: kicad/pcm/dialogs/panel_package.cpp:103
#: kicad/pcm/dialogs/panel_package_base.cpp:67
#: kicad/pcm/dialogs/panel_packages_view.cpp:704
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:121
msgid "Install"
msgstr "Installera"
#: kicad/pcm/dialogs/dialog_pcm.cpp:113 kicad/pcm/dialogs/panel_package.cpp:74
#: kicad/pcm/dialogs/panel_package.cpp:110
#: kicad/pcm/dialogs/panel_package.cpp:135
#: kicad/pcm/dialogs/panel_package.cpp:149
#: kicad/pcm/dialogs/panel_packages_view.cpp:705
msgid "Uninstall"
msgstr "Avinstallera"
#: kicad/pcm/dialogs/dialog_pcm.cpp:152 kicad/pcm/dialogs/dialog_pcm.cpp:378
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:53
#, c-format
msgid "Repository (%d)"
msgstr "Repository (%d)"
#: kicad/pcm/dialogs/dialog_pcm.cpp:160
msgid "Apply Pending Changes"
msgstr "Verkställ ändringar"
#: kicad/pcm/dialogs/dialog_pcm.cpp:161
msgid "Discard Pending Changes"
msgstr "Ignorera Ändringar"
#: kicad/pcm/dialogs/dialog_pcm.cpp:202
msgid ""
"Are you sure you want to close the package manager and discard pending "
"changes?"
msgstr ""
"Är du säker på att du vill stänga ner pakethanteraren och förkasta väntande "
"ändringar?"
#: kicad/pcm/dialogs/dialog_pcm.cpp:283
msgid "Choose package file"
msgstr "Välj paketfil"
#: kicad/pcm/dialogs/dialog_pcm.cpp:393
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:121
#, c-format
msgid "Pending (%d)"
msgstr "Förestående (%d)"
#: kicad/pcm/dialogs/dialog_pcm.cpp:433
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:62
#, c-format
msgid "Installed (%d)"
msgstr "Installerad (%d)"
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:37
msgid "Manage..."
msgstr "Hantera..."
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:85
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:104
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:90
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:40
#: pcbnew/dialogs/panel_edit_options_base.cpp:155
#: pcbnew/dialogs/panel_edit_options_base.cpp:227
msgid "Action"
msgstr "Åtgärd"
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:86
msgid "Package"
msgstr "Paket"
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:88
msgid "Repository"
msgstr "Repository"
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:107
msgid "Discard action"
msgstr "Förkasta handling"
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:134
msgid "Install from File..."
msgstr "Installera från fil..."
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:137
msgid "Open Package Directory"
msgstr "Öppna paketbibliotek"
#: kicad/pcm/dialogs/dialog_pcm_base.h:76
msgid "Plugin And Content Manager"
msgstr "Insticksmoduls- och innehållshanterare"
#: kicad/pcm/dialogs/dialog_pcm_progress.cpp:57
msgid "Aborting remaining tasks."
msgstr "Avbryter återstående uppgifter."
#: kicad/pcm/dialogs/dialog_pcm_progress.cpp:137
#, c-format
msgid "Downloaded %lld/%lld kB"
msgstr "Nedladdat %lld/%lld kB"
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:21
msgid "Download Progress"
msgstr "Nedladdningsframsteg"
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:23
msgid "Waiting..."
msgstr "Väntar..."
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:42
msgid "Overall Progress"
msgstr "Totalt framsteg"
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:52
msgid "Details"
msgstr "Detaljer"
#: kicad/pcm/dialogs/dialog_pcm_progress_base.h:58
msgid "Applying Package Changes"
msgstr "Verkställer paketändringar"
#: kicad/pcm/dialogs/panel_package.cpp:67
msgid "Pin package"
msgstr "Nåla fast paket"
#: kicad/pcm/dialogs/panel_package.cpp:68
msgid ""
"Pinned packages don't affect available update notification and will not be "
"updated with 'Update All' button."
msgstr ""
"Fastnålade paket påverkar inte meddelanden om tillgängliga uppdateringar och "
"kommer inte att uppdateras med knappen \"Uppdatera alla\"."
#: kicad/pcm/dialogs/panel_package.cpp:120
msgid "Install Pending"
msgstr "Kommer att installeras"
#: kicad/pcm/dialogs/panel_package.cpp:126
msgid "Uninstall Pending"
msgstr "Kommer att avinstalleras"
#: kicad/pcm/dialogs/panel_package.cpp:159
msgid "Update Pending"
msgstr "Uppdatera väntande"
#: kicad/pcm/dialogs/panel_packages_view.cpp:219
msgid "Metadata"
msgstr "Metadata"
#: kicad/pcm/dialogs/panel_packages_view.cpp:221
msgid "Package identifier: "
msgstr "Paketidentifierare: "
#: kicad/pcm/dialogs/panel_packages_view.cpp:222
msgid "License: "
msgstr "Licens: "
#: kicad/pcm/dialogs/panel_packages_view.cpp:236
msgid "Tags: "
msgstr "Taggar: "
#: kicad/pcm/dialogs/panel_packages_view.cpp:268
msgid "Author"
msgstr "Upphovsman"
#: kicad/pcm/dialogs/panel_packages_view.cpp:271
msgid "Maintainer"
msgstr "Underhållare"
#: kicad/pcm/dialogs/panel_packages_view.cpp:275
msgid "Resources"
msgstr "Resurser"
#: kicad/pcm/dialogs/panel_packages_view.cpp:509
msgid "Package download url is not specified"
msgstr "Paketets nedladdningslänk är inte angiven"
#: kicad/pcm/dialogs/panel_packages_view.cpp:510
msgid "Error downloading package"
msgstr "Fel vid nedladdning av paket"
#: kicad/pcm/dialogs/panel_packages_view.cpp:519
msgid "Save package"
msgstr "Spara paket"
#: kicad/pcm/dialogs/panel_packages_view.cpp:532
msgid "Downloading package"
msgstr "Laddar ned paket"
#: kicad/pcm/dialogs/panel_packages_view.cpp:550
msgid ""
"Integrity of the downloaded package could not be verified, hash does not "
"match. Are you sure you want to keep this file?"
msgstr ""
"Det nedladdade paketets integritet kunde inte bekräftas eftersom dess hash "
"inte matchar. Är du säker på att du vill behålla filen?"
#: kicad/pcm/dialogs/panel_packages_view.cpp:552
msgid "Keep downloaded file"
msgstr "Spara nedladdad fil"
#: kicad/pcm/dialogs/panel_packages_view.cpp:601
msgid ""
"This package version is incompatible with your kicad version or platform. "
"Are you sure you want to install it anyway?"
msgstr ""
"Detta pakets version är inte kompatibel med din KiCad-version eller "
"platform. Vill du installera det ändå?"
#: kicad/pcm/dialogs/panel_packages_view.cpp:603
msgid "Install package"
msgstr "Installera paket"
#: kicad/pcm/dialogs/panel_packages_view.cpp:712
msgid "Pending"
msgstr "Väntande"
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:38
msgid "Update All"
msgstr "Uppdatera alla"
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:91
msgid "Download Size"
msgstr "Nedladdningsstorlek"
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:92
msgid "Install Size"
msgstr "Installationsstorlek"
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:93
msgid "Compatible"
msgstr "Kompatibel"
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:112
msgid "Show all versions"
msgstr "Visa alla versioner"
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:118
msgid "Download"
msgstr "Ladda ned"
#: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:20
msgid "Check for package updates on startup"
msgstr "Sök efter paketuppdateringar vid uppstart"
#: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:28
msgid "Library package handling"
msgstr "Hantering av bibliotekspaket"
#: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:30
msgid "Automatically add installed libraries to global lib table"
msgstr ""
"Lägg automatiskt till installerade bibliotek i den globala bibliotekstabellen"
#: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:34
msgid "Automatically remove uninstalled libraries"
msgstr "Ta automatiskt bort avinstallerade bibliotek"
#: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:41
msgid "Library nickname prefix:"
msgstr "Prefix för bibliotekets smeknamn:"
#: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:51
msgid ""
"After packages are (un)installed KiCad may need to be restarted to reflect "
"changes in the global library table."
msgstr ""
"När paket har (av)installerats kan KiCad behöva startas om för att ändringar "
"i den globala bibliotekstabellen skall visas."
#: kicad/pcm/pcm.cpp:123
#, c-format
msgid "schema file '%s' not found"
msgstr "Schema-fil '%s' hittades inte"
#: kicad/pcm/pcm.cpp:128
#, c-format
msgid "Error loading schema: %s"
msgstr "Fel vid inläsning av schema: %s"
#: kicad/pcm/pcm.cpp:155
#, c-format
msgid "Error loading installed packages list: %s"
msgstr "Fel vid inläsning av listan över installerade paket: %s"
#: kicad/pcm/pcm.cpp:255
#, c-format
msgid "Downloading %lld/%lld kB"
msgstr "Laddar ned %lld/%lld kB"
#: kicad/pcm/pcm.cpp:282
msgid "Download is too large."
msgstr "Nedladdningen är för stor."
#: kicad/pcm/pcm.cpp:299
msgid "Fetching repository"
msgstr "Hämtar repository"
#: kicad/pcm/pcm.cpp:304
msgid "Unable to load repository url"
msgstr "Kunde inte läsa repositoryts url"
#: kicad/pcm/pcm.cpp:323
#, c-format
msgid "Unable to parse repository: %s"
msgstr "Kan inte tolka repository: %s"
#: kicad/pcm/pcm.cpp:324
msgid ""
"The given repository URL does not look like a valid KiCad package "
"repository. Please double check the URL."
msgstr ""
"Den angivna URL:en till repository ser inte ut som ett giltigt KiCad "
"paketrepository. Vänligen kontrollera URL:en."
#: kicad/pcm/pcm.cpp:350
msgid "Fetching repository packages"
msgstr "Hämtar repositoryts paket"
#: kicad/pcm/pcm.cpp:355
msgid "Unable to load repository packages url."
msgstr "Kunde inte läsa repositoryts paket-url."
#: kicad/pcm/pcm.cpp:365
msgid "Packages hash doesn't match. Repository may be corrupted."
msgstr "Paketets hash stämmer inte överens. Repositoryt kan vara korrupt."
#: kicad/pcm/pcm.cpp:381
#, c-format
msgid ""
"Unable to parse packages metadata:\n"
"\n"
"%s"
msgstr ""
"Kan inte tolka pakets metadata:\n"
"\n"
"%s"
#: kicad/pcm/pcm.cpp:483
msgid ""
"Packages cache for current repository is corrupted, it will be redownloaded."
msgstr ""
"Paket-cachen för aktuellt repository är korrupt. Det kommer laddas ned på "
"nytt."
#: kicad/pcm/pcm.cpp:535
msgid "Downloading resources"
msgstr "Laddar ned resurser"
#: kicad/pcm/pcm.cpp:555
msgid ""
"Resources file hash doesn't match and will not be used. Repository may be "
"corrupted."
msgstr ""
"Resurs-filens hash stämmer inte överens och kommer inte användas. "
"Repositoryt kan vara korrupt."
#: kicad/pcm/pcm.cpp:794
msgid "Local file"
msgstr "Lokal fil"
#: kicad/pcm/pcm.cpp:1175
msgid "Package updates are available"
msgstr "Det finns paketuppdateringar tillgängliga"
#: kicad/pcm/pcm.cpp:1176
msgid "No package updates available"
msgstr "Inga paketuppdateringar tillgängliga"
#: kicad/pcm/pcm_task_manager.cpp:74 kicad/pcm/pcm_task_manager.cpp:165
#, c-format
msgid "Version %s of package %s not found!"
msgstr "Version %s av paket %s hittades inte!"
#: kicad/pcm/pcm_task_manager.cpp:83
msgid "Unable to create download directory!"
msgstr "Kunde inte skapa nedladdningslatalog!"
#: kicad/pcm/pcm_task_manager.cpp:129
#, c-format
msgid "Downloading package url: '%s'"
msgstr "Laddar ned paket-url: '%s'"
#: kicad/pcm/pcm_task_manager.cpp:143
#, c-format
msgid ""
"Failed to download url %s\n"
"%s"
msgstr ""
"Det gick inte att ladda url %s\n"
"%s"
#: kicad/pcm/pcm_task_manager.cpp:188
#, c-format
msgid ""
"Downloaded archive hash for package %s does not match repository entry. This "
"may indicate a problem with the package, if the issue persists report this "
"to repository maintainers."
msgstr ""
"Det nedladdade arkivets hash för paket %s matchar inte repositoryts. Detta "
"kan tyda på ett problem med paketet. Rapportera problemet till repositoryts "
"underhållare om det kvarstår."
#: kicad/pcm/pcm_task_manager.cpp:201 kicad/pcm/pcm_task_manager.cpp:413
#, c-format
msgid "Removing previous version of package '%s'."
msgstr "Tar bort föregående version av paket '%s'."
#: kicad/pcm/pcm_task_manager.cpp:209
#, c-format
msgid "Extracting package '%s'."
msgstr "Extraherar paket '%s'."
#: kicad/pcm/pcm_task_manager.cpp:228
#, c-format
msgid "Removing downloaded archive '%s'."
msgstr "Tar bort det nedladdade arkivet '%s'."
#: kicad/pcm/pcm_task_manager.cpp:313
msgid "Aborting package installation."
msgstr "Avbryter paketinstallation."
#: kicad/pcm/pcm_task_manager.cpp:317
msgid "Extracted package\n"
msgstr "Extraherat paket\n"
#: kicad/pcm/pcm_task_manager.cpp:361
#, c-format
msgid ""
"Unable to parse package metadata:\n"
"\n"
"%s"
msgstr ""
"Kan inte tolka metadata för paket:\n"
"\n"
"%s"
#: kicad/pcm/pcm_task_manager.cpp:370
msgid "Archive does not contain a valid metadata.json file"
msgstr "Arkivet innehåller ingen giltig metadata.json-fil"
#: kicad/pcm/pcm_task_manager.cpp:378
msgid "Archive metadata must have a single version defined"
msgstr "Arkivets metadata måste ha en enda version definierad"
#: kicad/pcm/pcm_task_manager.cpp:396
#, c-format
msgid ""
"Package with identifier %s is already installed. Would you like to update it "
"to the version from selected file?"
msgstr ""
"Ett paket med identifierare %s är redan installerat. Vill du uppdatera det "
"till versionen i den valda filen?"
#: kicad/pcm/pcm_task_manager.cpp:399
msgid "Update package"
msgstr "Uppdatera paket"
#: kicad/pcm/pcm_task_manager.cpp:489
#, c-format
msgid "Removing directory %s"
msgstr "Tar bort katalog %s"
#: kicad/pcm/pcm_task_manager.cpp:497
#, c-format
msgid "Failed to remove directory %s"
msgstr "Kunde inte flytta katalog %s"
#: kicad/pcm/pcm_task_manager.cpp:561
#, c-format
msgid "Package %s uninstalled"
msgstr "Paket %s avinstallerat"
#: kicad/project_template.cpp:52
msgid "Could open the template path!"
msgstr "Kan öppna mallvägen!"
#: kicad/project_template.cpp:57
msgid "Couldn't open the meta information directory for this template!"
msgstr ""
"Det gick inte att öppna katalogen för metainformation för den här mallen!"
#: kicad/project_template.cpp:63
msgid "Couldn't find the meta HTML information file for this template!"
msgstr "Kunde inte hitta meta-HTML-information-filen för denna mall!"
#: kicad/project_template.cpp:260
#, c-format
msgid "Cannot create folder '%s'."
msgstr "Kan inte skapa mappen '%s'."
#: kicad/project_tree_item.cpp:130
msgid ""
"Changing file extension will change file type.\n"
"Do you want to continue ?"
msgstr ""
"Ändring av filändelsen medför ändrad filtyp.\n"
"Vill du fortsätta ?"
#: kicad/project_tree_item.cpp:132
msgid "Rename File"
msgstr "Döp om fil"
#: kicad/project_tree_item.cpp:140
msgid "Unable to rename file ... "
msgstr "Kunde inte att byta namn på filen... "
#: kicad/project_tree_item.cpp:140
msgid "Permission error?"
msgstr "Tillståndsfel?"
#: kicad/project_tree_item.cpp:159
#, c-format
msgid "Can not move '%s' to recycle bin."
msgstr "Kan inte flytta '%s' till papperskorgen."
#: kicad/project_tree_item.cpp:162
#, c-format
msgid "Can not move '%s' to trash."
msgstr "Kan inte flytta '%s' till papperskorgen."
#: kicad/project_tree_pane.cpp:238
msgid "Directory name:"
msgstr "Katalognamn:"
#: kicad/project_tree_pane.cpp:238
msgid "Create New Directory"
msgstr "Skapa ny mapp"
#: kicad/project_tree_pane.cpp:679
msgid "Switch to this Project"
msgstr "Byt till detta projekt"
#: kicad/project_tree_pane.cpp:680
msgid "Close all editors, and switch to the selected project"
msgstr "Stäng alla redigerare och växla till det valda projektet"
#: kicad/project_tree_pane.cpp:687
msgid "New Directory..."
msgstr "Ny katalog ..."
#: kicad/project_tree_pane.cpp:688
msgid "Create a New Directory"
msgstr "Skapa en ny mapp"
#: kicad/project_tree_pane.cpp:696 kicad/project_tree_pane.cpp:706
msgid "Reveal in Finder"
msgstr "Avslöja i Finder"
#: kicad/project_tree_pane.cpp:697
msgid "Reveals the directory in a Finder window"
msgstr "Visar katalogen i ett Finder-fönster"
#: kicad/project_tree_pane.cpp:699
msgid "Open Directory in File Explorer"
msgstr "Öppna katalog i File Explorer"
#: kicad/project_tree_pane.cpp:700 pcbnew/tools/pcb_actions.cpp:621
msgid "Opens the directory in the default system file manager"
msgstr "Öppnar katalogen i standardsystemfilhanteraren"
#: kicad/project_tree_pane.cpp:707
msgid "Reveals the directories in a Finder window"
msgstr "Avslöjar katalogerna i ett Finder-fönster"
#: kicad/project_tree_pane.cpp:709
msgid "Open Directories in File Explorer"
msgstr "Öppna kataloger i File Explorer"
#: kicad/project_tree_pane.cpp:710
msgid "Opens the directories in the default system file manager"
msgstr "Öppnar katalogerna i standardsystemfilhanteraren"
#: kicad/project_tree_pane.cpp:721
msgid "Open the file in a Text Editor"
msgstr "Öppna filen i en textredigerare"
#: kicad/project_tree_pane.cpp:723
msgid "Open files in a Text Editor"
msgstr "Öppna filer i en textredigerare"
#: kicad/project_tree_pane.cpp:725
msgid "Edit in a Text Editor"
msgstr "Redigera i en textredigerare"
#: kicad/project_tree_pane.cpp:733
msgid "Rename File..."
msgstr "Döp om fil..."
#: kicad/project_tree_pane.cpp:734
msgid "Rename file"
msgstr "Döp om fil"
#: kicad/project_tree_pane.cpp:738
msgid "Rename Files..."
msgstr "Byt namn på filer ..."
#: kicad/project_tree_pane.cpp:739
msgid "Rename files"
msgstr "Byt namn på fil"
#: kicad/project_tree_pane.cpp:748
msgid "Delete the file and its content"
msgstr "Ta bort filen och dess innehåll"
#: kicad/project_tree_pane.cpp:750
msgid "Delete the files and their contents"
msgstr "Ta bort filerna och deras innehåll"
#: kicad/project_tree_pane.cpp:765
msgid "Move to Trash"
msgstr "Flytta till papperskorgen"
#: kicad/project_tree_pane.cpp:821
#, c-format
msgid "Change filename: '%s'"
msgstr "Ändra filnamn: '%s'"
#: kicad/project_tree_pane.cpp:823
msgid "Change filename"
msgstr "Ändra filnamn"
#: kicad/project_tree_pane.cpp:1143
msgid "Network path: not monitoring folder changes"
msgstr "Nätverksväg: övervakar inte mappändringar"
#: kicad/project_tree_pane.cpp:1148
msgid "Local path: monitoring folder changes"
msgstr "Lokal sökväg: övervakning av mappändringar"
#: kicad/tools/kicad_manager_actions.cpp:41
msgid "New Project..."
msgstr "Nytt projekt..."
#: kicad/tools/kicad_manager_actions.cpp:41
msgid "Create new blank project"
msgstr "Skapa nytt tomt projekt"
#: kicad/tools/kicad_manager_actions.cpp:47
msgid "New Project from Template..."
msgstr "Nytt projekt från mall ..."
#: kicad/tools/kicad_manager_actions.cpp:47
msgid "Create new project from template"
msgstr "Skapa nytt projekt från mall"
#: kicad/tools/kicad_manager_actions.cpp:53
msgid "Open Demo Project..."
msgstr "Öppna demoprojekt..."
#: kicad/tools/kicad_manager_actions.cpp:53
msgid "Open a demo project"
msgstr "Öppna ett demoprojekt"
#: kicad/tools/kicad_manager_actions.cpp:59
msgid "Open Project..."
msgstr "Öppna projekt..."
#: kicad/tools/kicad_manager_actions.cpp:59
msgid "Open an existing project"
msgstr "Öppna ett befintligt projekt"
#: kicad/tools/kicad_manager_actions.cpp:65
msgid "Close Project"
msgstr "Stäng projektet"
#: kicad/tools/kicad_manager_actions.cpp:65
msgid "Close the current project"
msgstr "Stäng det aktuella projektet"
#: kicad/tools/kicad_manager_actions.cpp:80
msgid "Edit schematic"
msgstr "Redigera kretsschema"
#: kicad/tools/kicad_manager_actions.cpp:86
msgid "Edit schematic symbols"
msgstr "Redigera kretsschemasymboler"
#: kicad/tools/kicad_manager_actions.cpp:92
msgid "Edit PCB"
msgstr "Redigera mönsterkort"
#: kicad/tools/kicad_manager_actions.cpp:98
msgid "Edit PCB footprints"
msgstr "Redigera komponentfotavtryck för mönsterkort"
#: kicad/tools/kicad_manager_actions.cpp:104
msgid "Preview Gerber output files"
msgstr "Förhandsvisa utmatade Gerber-filer"
#: kicad/tools/kicad_manager_actions.cpp:110
msgid "Convert bitmap images to schematic or PCB components"
msgstr ""
"Konvertera bitmappsbilder till kretsschemasymboler eller komponentfotavtryck "
"för mönsterkort"
#: kicad/tools/kicad_manager_actions.cpp:115
#: pcb_calculator/pcb_calculator_frame.cpp:53
msgid "Calculator Tools"
msgstr "Beräkningsverktyg"
#: kicad/tools/kicad_manager_actions.cpp:115
msgid "Run component calculations, track width calculations, etc."
msgstr "Beräkna komponentvärden, ledarbredder etc."
#: kicad/tools/kicad_manager_actions.cpp:121
msgid "Edit drawing sheet borders and title block"
msgstr "Ändra ritningsarkets ram och namnruta"
#: kicad/tools/kicad_manager_actions.cpp:127
msgid "Run Plugin and Content Manager"
msgstr "Starta insticksmoduls- och innehållshanteraren"
#: kicad/tools/kicad_manager_actions.cpp:133
msgid "Open Text Editor"
msgstr "Öppna textredigeraren"
#: kicad/tools/kicad_manager_actions.cpp:133
msgid "Launch preferred text editor"
msgstr "Öppna textredigerare"
#: kicad/tools/kicad_manager_control.cpp:71
msgid "Create New Project"
msgstr "Skapa nytt projekt"
#: kicad/tools/kicad_manager_control.cpp:126
msgid ""
"The selected folder is not empty. It is recommended that you create "
"projects in their own empty folder.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Den valda katalogen är inte tom. Det rekommenderas att du skapar projekt i "
"egna, tomma kataloger.\n"
"\n"
"Vill du fortsätta?"
#: kicad/tools/kicad_manager_control.cpp:153
msgid "System Templates"
msgstr "Systemmallar"
#: kicad/tools/kicad_manager_control.cpp:162
msgid "User Templates"
msgstr "Egna mallar"
#: kicad/tools/kicad_manager_control.cpp:171
msgid "No project template was selected. Cannot generate new project."
msgstr "Ingen projektmall valdes. Det går inte att skapa ett nytt projekt."
#: kicad/tools/kicad_manager_control.cpp:179
msgid "New Project Folder"
msgstr "Ny projektmapp"
#: kicad/tools/kicad_manager_control.cpp:237
#: kicad/tools/kicad_manager_control.cpp:675
#, c-format
msgid "Insufficient permissions to write to folder '%s'."
msgstr "Otillräckliga behörigheter för att skriva till mappen '%s'."
#: kicad/tools/kicad_manager_control.cpp:258
msgid "Overwriting files:"
msgstr "Skriva över filer:"
#: kicad/tools/kicad_manager_control.cpp:264
msgid "Similar files already exist in the destination folder."
msgstr "Liknande filer finns redan i målmappen."
#: kicad/tools/kicad_manager_control.cpp:283
msgid "A problem occurred creating new project from template."
msgstr "Ett problem uppstod under skapandet av ett nytt projekt från mall."
#: kicad/tools/kicad_manager_control.cpp:306
msgid "Open Existing Project"
msgstr "Öppna befintligt projekt"
#: kicad/tools/kicad_manager_control.cpp:600
#, c-format
msgid "Cannot copy folder '%s'."
msgstr "Kan inte kopiera mappen '%s'."
#: kicad/tools/kicad_manager_control.cpp:646
msgid "Save Project To"
msgstr "Spara projekt till"
#: kicad/tools/kicad_manager_control.cpp:666
#, c-format
msgid ""
"Folder '%s' could not be created.\n"
"\n"
"Please make sure you have write permissions and try again."
msgstr ""
"Mappen '%s' kunde inte skapas.\n"
"\n"
"Se till att du har skrivbehörighet och försök igen."
#: kicad/tools/kicad_manager_control.cpp:677
msgid "Error!"
msgstr "Fel!"
#: kicad/tools/kicad_manager_control.cpp:733
msgid "Create (or open) a project to edit a schematic."
msgstr "Skapa (eller öppna) ett projekt för att redigera ett kretsschema."
#: kicad/tools/kicad_manager_control.cpp:739
msgid "Create (or open) a project to edit a pcb."
msgstr "Skapa (eller öppna) ett projekt för att redigera ett mönsterkort."
#: kicad/tools/kicad_manager_control.cpp:756
msgid "Application failed to load:\n"
msgstr "Programmet kunde inte laddas:\n"
#: kicad/tools/kicad_manager_control.cpp:756
#: kicad/tools/kicad_manager_control.cpp:763 pcbnew/pcb_edit_frame.cpp:1833
#: pcbnew/pcb_edit_frame.cpp:1863
msgid "KiCad Error"
msgstr "KiCad-fel"
#: kicad/tools/kicad_manager_control.cpp:763
msgid "Application failed to load."
msgstr "Programmet kunde inte laddas."
#: kicad/widgets/filedlg_new_project.h:32
#: kicad/widgets/legacyfiledlg_new_project.h:34
msgid "Create a new folder for the project"
msgstr "Skapa en ny katalog för projektet"
#: libs/kiplatform/msw/environment.cpp:63
#, c-format
msgid "Error code: %d"
msgstr "Felkod: %d"
#: pagelayout_editor/dialogs/design_inspector.cpp:223
msgid "Layout"
msgstr "Layout"
#: pagelayout_editor/dialogs/design_inspector.cpp:227
#, c-format
msgid "Size: %.1fx%.1fmm"
msgstr "Storlek: %.1f x %.1f mm"
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:36
msgid "-"
msgstr "-"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:30
msgid "Y start:"
msgstr "Y-start:"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:44
msgid "X start:"
msgstr "X start:"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:64
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:124
msgid "Origin"
msgstr "Origo"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:274
#: pagelayout_editor/dialogs/properties_frame_base.cpp:327
msgid "Upper Right"
msgstr "Upp till höger"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:275
#: pagelayout_editor/dialogs/properties_frame_base.cpp:328
msgid "Upper Left"
msgstr "Övre vänster"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:273
#: pagelayout_editor/dialogs/properties_frame_base.cpp:276
#: pagelayout_editor/dialogs/properties_frame_base.cpp:329
msgid "Lower Right"
msgstr "Nedre högra"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:277
#: pagelayout_editor/dialogs/properties_frame_base.cpp:326
#: pagelayout_editor/dialogs/properties_frame_base.cpp:330
msgid "Lower Left"
msgstr "Nedre vänstra"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:90
msgid "X end:"
msgstr "X-ände:"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:104
msgid "Y end:"
msgstr "Y-slut:"
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.h:72
msgid "New Item"
msgstr "Nytt föremål"
#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:234
msgid "Print Drawing Sheet"
msgstr "Skriv ut ritningsark"
#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:239
msgid "An error occurred attempting to print the drawing sheet."
msgstr "Ett fel inträffade under ett försök att skriva ut ritningsarket."
#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:240
msgid "Printing"
msgstr "Utskrift"
#: pagelayout_editor/dialogs/properties_frame.cpp:605
msgid "Predefined Keywords"
msgstr "Fördefinierade nyckelord"
#: pagelayout_editor/dialogs/properties_frame.cpp:608
msgid "Texts can include keywords."
msgstr "Texter kan innehålla nyckelord."
#: pagelayout_editor/dialogs/properties_frame.cpp:609
msgid "Keyword notation is ${keyword}"
msgstr "Nyckelords-notation är ${keyword}"
#: pagelayout_editor/dialogs/properties_frame.cpp:610
msgid "Each keyword is replaced by its value"
msgstr "Varje nyckelord ersätts med dess värde"
#: pagelayout_editor/dialogs/properties_frame.cpp:611
msgid "These build-in keywords are always available:"
msgstr "Dessa inbyggda nyckelord är alltid tillgängliga:"
#: pagelayout_editor/dialogs/properties_frame.cpp:615
msgid "(sheet number)"
msgstr "(bladnummer)"
#: pagelayout_editor/dialogs/properties_frame.cpp:616
msgid "(sheet count)"
msgstr "(bladantal)"
#: pagelayout_editor/dialogs/properties_frame.cpp:622
msgid "(paper size)"
msgstr "(pappersstorlek)"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:38
msgid "Show on all pages"
msgstr "Visa på alla sidor"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:38
msgid "First page only"
msgstr "Endast första sidan"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:38
msgid "Subsequent pages only"
msgstr "Endast efterföljande sidor"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:160
#: pagelayout_editor/dialogs/properties_frame_base.cpp:473
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:189
msgid "Text width:"
msgstr "Text bredd:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:171
#: pagelayout_editor/dialogs/properties_frame_base.cpp:487
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:208
msgid "Text height:"
msgstr "Text höjd:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:182
msgid "Max width:"
msgstr "Maximal bredd:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:184
#: pagelayout_editor/dialogs/properties_frame_base.cpp:197
msgid "Set to 0 to disable this constraint"
msgstr "Ställ in på 0 för att inaktivera denna begränsning"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:195
#: pcbnew/teardrop/dialog_teardrop_base.cpp:83
#: pcbnew/teardrop/dialog_teardrop_base.cpp:103
#: pcbnew/teardrop/dialog_teardrop_base.cpp:187
#: pcbnew/teardrop/dialog_teardrop_base.cpp:207
#: pcbnew/teardrop/dialog_teardrop_base.cpp:291
#: pcbnew/teardrop/dialog_teardrop_base.cpp:311
msgid "Max height:"
msgstr "Maximal höjd:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:225
msgid "Set to 0 to use default values"
msgstr "Ställ in på 0 för att använda standardvärden"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:232
msgid "Comment:"
msgstr "Kommentar:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:269
#: pagelayout_editor/dialogs/properties_frame_base.cpp:322
msgid "From:"
msgstr "Från:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:292
msgid "End Position"
msgstr "Slutposition"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:364
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1344
msgid "Rotation:"
msgstr "Vridning:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:371
msgid "Bitmap DPI:"
msgstr "Bitmapp DPI:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:387
msgid "Repeat Parameters"
msgstr "Upprepningsparametrar"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:395
#: pcbnew/dialogs/dialog_create_array_base.cpp:263
msgid "Count:"
msgstr "Antal:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:405
msgid "Step text:"
msgstr "Stegtext:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:410
msgid "Number of characters or digits to step text by for each repeat."
msgstr "Antal tecken eller siffror som ska stegas för varje upprepning."
#: pagelayout_editor/dialogs/properties_frame_base.cpp:417
msgid "Step X:"
msgstr "Steg X:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:422
msgid "Distance on the X axis to step for each repeat."
msgstr "Avstånd på X-axeln till steg för varje upprepning."
#: pagelayout_editor/dialogs/properties_frame_base.cpp:430
msgid "Step Y:"
msgstr "Steg Y:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:435
msgid "Distance to step on Y axis for each repeat."
msgstr "Avstånd till steg på Y-axeln för varje upprepning."
#: pagelayout_editor/dialogs/properties_frame_base.cpp:449
#: pagelayout_editor/dialogs/properties_frame_base.cpp:609
msgid "Apply"
msgstr "Verkställ"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:458
msgid "Item Properties"
msgstr "Objektegenskaper"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:501
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:387
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:138
msgid "Line thickness:"
msgstr "Linjetjocklek:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:515
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:226
msgid "Text thickness:"
msgstr "Texttjocklek:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:535
msgid "Set to Default"
msgstr "Ställ in som standard"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:542
msgid "Page Margins"
msgstr "Sidmarginaler"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:550
msgid "Left:"
msgstr "Vänster:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:564
msgid "Right:"
msgstr "Höger:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:578
msgid "Top:"
msgstr "Överkant:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:592
msgid "Bottom:"
msgstr "Botten:"
#: pagelayout_editor/dialogs/properties_frame_base.cpp:621
#: pcbnew/dialogs/dialog_plot_base.cpp:68
msgid "General Options"
msgstr "Allmäna inställningar"
#: pagelayout_editor/files.cpp:57
msgid "Drawing Sheet File"
msgstr "Ritningsarksfil"
#: pagelayout_editor/files.cpp:63 pagelayout_editor/files.cpp:107
msgid "The current drawing sheet has been modified. Save changes?"
msgstr "Det aktuella ritningsarket har modifierats. Spara ändringar?"
#: pagelayout_editor/files.cpp:79
#, c-format
msgid "File \"%s\" loaded"
msgstr "Filen %s laddad"
#: pagelayout_editor/files.cpp:129
msgid "Append Existing Drawing Sheet"
msgstr "Lägg till befintligt ritningsark"
#: pagelayout_editor/files.cpp:140 pagelayout_editor/files.cpp:165
#, c-format
msgid "Unable to load %s file"
msgstr "Det gick inte att läsa in %s -filen"
#: pagelayout_editor/files.cpp:147
#, c-format
msgid "File \"%s\" inserted"
msgstr "Filen %s infogades"
#: pagelayout_editor/files.cpp:155
msgid "Open"
msgstr "Öppet"
#: pagelayout_editor/files.cpp:171 pagelayout_editor/files.cpp:218
#, c-format
msgid "File \"%s\" saved."
msgstr "Filen %s sparades."
#: pagelayout_editor/files.cpp:180
#, c-format
msgid "Unable to write '%s'."
msgstr "Kunde inte skriva '%s'."
#: pagelayout_editor/files.cpp:193
msgid "Save As"
msgstr "Spara som"
#: pagelayout_editor/files.cpp:243
msgid "Error reading drawing sheet"
msgstr "Fel vid inläsning av ritningsarket"
#: pagelayout_editor/files.cpp:267
msgid "Layout file is read only."
msgstr "Layoutfilen är skrivskyddat."
#: pagelayout_editor/pl_editor_frame.cpp:98
msgid "KiCad Drawing Sheet Editor"
msgstr "KiCad-ritningsarksredigerare"
#: pagelayout_editor/pl_editor_frame.cpp:158
msgid "coord origin: Right Bottom page corner"
msgstr "koord origo: Höger nedre sidhörn"
#: pagelayout_editor/pl_editor_frame.cpp:188 pcbnew/pcb_edit_frame.cpp:297
#: pcbnew/pcb_edit_frame.cpp:1481
msgid "Properties"
msgstr "Egenskaper"
#: pagelayout_editor/pl_editor_frame.cpp:341
#, c-format
msgid "Error loading drawing sheet '%s'."
msgstr "Fel vid inläsning av ritblad '%s'."
#: pagelayout_editor/pl_editor_frame.cpp:446
msgid "Error Init Printer info"
msgstr "Fel Init Skrivarinfo"
#: pagelayout_editor/pl_editor_frame.cpp:548
msgid "[no drawing sheet loaded]"
msgstr "[inget ritningsark laddat]"
#: pagelayout_editor/pl_editor_frame.cpp:762
#, c-format
msgid "coord origin: %s"
msgstr "koord origo: %s"
#: pagelayout_editor/pl_editor_frame.cpp:903
msgid "New drawing sheet file is unsaved"
msgstr "Ny ritningsarksfil är inte sparad"
#: pagelayout_editor/pl_editor_frame.cpp:907
msgid "Drawing sheet changes are unsaved"
msgstr "Ändringar i ritbladet är inte sparade"
#: pagelayout_editor/pl_editor_frame.cpp:951
msgid "Page Width"
msgstr "Sidans bredd"
#: pagelayout_editor/pl_editor_frame.cpp:952
msgid "Page Height"
msgstr "Sidans höjd"
#: pagelayout_editor/toolbars_pl_editor.cpp:73
msgid "Left Top paper corner"
msgstr "Vänster övre pappershörn"
#: pagelayout_editor/toolbars_pl_editor.cpp:74
msgid "Right Bottom page corner"
msgstr "Sidans högra nedre hörn"
#: pagelayout_editor/toolbars_pl_editor.cpp:75
msgid "Left Bottom page corner"
msgstr "Sidans vänstra nedre hörn"
#: pagelayout_editor/toolbars_pl_editor.cpp:76
msgid "Right Top page corner"
msgstr "Sidans högra övre hörn"
#: pagelayout_editor/toolbars_pl_editor.cpp:77
msgid "Left Top page corner"
msgstr "Sidans vänstra övre hörn"
#: pagelayout_editor/toolbars_pl_editor.cpp:88
msgid "Origin of coordinates displayed to the status bar"
msgstr "Origo för statusfältets koordinatvisning"
#: pagelayout_editor/toolbars_pl_editor.cpp:103
msgid "Page 1"
msgstr "Sida 1"
#: pagelayout_editor/toolbars_pl_editor.cpp:104
msgid "Other pages"
msgstr "Andra sidor"
#: pagelayout_editor/toolbars_pl_editor.cpp:114
msgid ""
"Simulate page 1 or other pages to show how items\n"
"which are not on all page are displayed"
msgstr ""
"Simulera sida 1 eller andra sidor för att visa hur objekt\n"
"som inte finns på hela sidan visas"
#: pagelayout_editor/tools/pl_actions.cpp:44
msgid "Add Line"
msgstr "Lägg till linje"
#: pagelayout_editor/tools/pl_actions.cpp:44
msgid "Add a line"
msgstr "Lägg till en rad"
#: pagelayout_editor/tools/pl_actions.cpp:59
msgid "Add Bitmap"
msgstr "Lägg till bitmapp"
#: pagelayout_editor/tools/pl_actions.cpp:59
msgid "Add a bitmap image"
msgstr "Lägg till en bitmappsbild"
#: pagelayout_editor/tools/pl_actions.cpp:73
msgid "Append Existing Drawing Sheet..."
msgstr "Lägg till befintligt ritningsark..."
#: pagelayout_editor/tools/pl_actions.cpp:74
msgid "Append an existing drawing sheet file to current file"
msgstr "Lägg till en befintlig ritningsarksfil till den aktuella filen"
#: pagelayout_editor/tools/pl_actions.cpp:82
msgid "Show Design Inspector"
msgstr "Visa designinspektör"
#: pagelayout_editor/tools/pl_actions.cpp:82
msgid "Show the list of items in the drawing sheet"
msgstr "Visa listan av objekt i ritningsarket"
#: pagelayout_editor/tools/pl_actions.cpp:87
msgid "Page Preview Settings..."
msgstr "Inställningar för förhandsgranskning av sida ..."
#: pagelayout_editor/tools/pl_actions.cpp:87
msgid "Edit preview data for page size and title block"
msgstr "Redigera förhandsgranskningsdata för sidstorlek och namnruta"
#: pagelayout_editor/tools/pl_actions.cpp:92
msgid "Show title block in preview mode"
msgstr "Visa namnruta i förhandsgranskningsläge"
#: pagelayout_editor/tools/pl_actions.cpp:93
msgid ""
"Show title block in preview mode:\n"
"text placeholders will be replaced with preview data."
msgstr ""
"Visa namnruta i förhandsgranskningsläge:\n"
"textplatshållare kommer att ersättas med förhandsgranskningsdata."
#: pagelayout_editor/tools/pl_actions.cpp:99
msgid "Show title block in edit mode"
msgstr "Visa namnruta i redigeringsläge"
#: pagelayout_editor/tools/pl_actions.cpp:100
msgid ""
"Show title block in edit mode:\n"
"text placeholders are shown as ${keyword} tokens."
msgstr ""
"Visa namnruta i redigeringsläge:\n"
"textplatshållare visas som $ {keyword} tokens."
#: pagelayout_editor/tools/pl_edit_tool.cpp:515
msgid "Error writing objects to clipboard"
msgstr "Fel vid skrivning av objekt till Urklipp"
#: pcb_calculator/attenuators/bridget_tee_formula.h:2
msgid ""
"### Bridged Tee Attenuator\n"
"___a___ is attenuation in dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in Ω<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in Ω<br>\n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>out</sub>___\n"
"\n"
"___L = 10<sup>a/20</sup>___<br>\n"
"___R1 = Z<sub>0</sub> · (L−1)___<br>\n"
"___R2 = Z<sub>0</sub> / (L−1)___\n"
msgstr ""
"### Bridged Tee-dämpare\n"
"___a___ är dämpning i dB<br>\n"
"___Z<sub>in</sub>___ är önskad ingångsimpedans i Ω<br>\n"
"___Z<sub>ut</sub>___ är önskad utgångsimpedans i Ω<br>\n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>ut</sub>___\n"
"\n"
"___L = 10<sup>a/20</sup>___<br>\n"
"___R1 = Z<sub>0</sub> · (L−1)___<br>\n"
"___R2 = Z<sub>0</sub> / (L−1)___\n"
#: pcb_calculator/attenuators/pi_formula.h:2
msgid ""
"### Pi Attenuator\n"
"___a___ is attenuation in dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in Ω<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in Ω<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = K<sup>2</sup> = 10<sup>a/10</sup>___<br>\n"
"___A = (L+1) / (L−1)___<br><br>\n"
"___R2 = (L−1) / 2·√(Z<sub>in</sub> · Z<sub>out</"
"sub> / L)___<br>\n"
"___R1 = 1 / (A/Z<sub>in</sub> − 1/R2)___<br>\n"
"___R3 = 1 / (A/Z<sub>out</sub> − 1/R2)___\n"
msgstr ""
"### Pi-dämpare\n"
"___a___ är dämpning i dB<br>\n"
"___Z<sub>in</sub>___ är önskad ingångsimpedans i Ω<br>\n"
"___Z<sub>ut</sub>___ är önskad utgångsimpedans i Ω<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = 10<sup>a/20</sup>___<br>\n"
"___A = (L+1) / (L−1)___<br><br>\n"
"___R2 = (L−1) / 2·√(Z<sub>in</sub> · Z<sub>ut</"
"sub> / L)___<br>\n"
"___R1 = 1 / (A/Z<sub>in</sub> − 1/R2)___<br>\n"
"___R3 = 1 / (A/Z<sub>ut</sub> − 1/R2)___\n"
#: pcb_calculator/attenuators/splitter_formula.h:2
msgid ""
"### Split Attenuator\n"
"Attenuation is 6 dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in Ω<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in Ω<br>\n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>out</sub>___\n"
"\n"
"___R1 = R2 = R3 = Z<sub>0</sub>/3___\n"
msgstr ""
"### Fördelningsdämpare\n"
"Dämpning är 6 dB \n"
"___Z<sub>in</sub>___ är önskad ingångsimpedans i Ω \n"
"___Z<sub>ut</sub>___ är önskad utgångsimpedans i Ω \n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>ut</sub>___\n"
"\n"
"___R1 = R2 = R3 = Z<sub>0</sub>/3___\n"
#: pcb_calculator/attenuators/tee_formula.h:2
msgid ""
"### Tee Attenuator\n"
"___a___ is attenuation in dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in Ω<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in Ω<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = K<sup>2</sup> = 10<sup>a/10</sup>___<br>\n"
"___A = (L+1) / (L−1)___<br><br>\n"
"___R2 = 2·√(L · Z<sub>in</sub> · Z<sub>out</"
"sub>) / (L−1)___<br>\n"
"___R1 = Z<sub>in</sub> · A − R2___<br>\n"
"___R3 = Z<sub>out</sub> · A − R2___\n"
msgstr ""
"### Tee-dämpare\n"
"___a___ är dämpning i dB<br>\n"
"___Z<sub>in</sub>___ är önskad ingångsimpedans i Ω<br>\n"
"___Z<sub>ut</sub>___ är önskad utgångsimpedans i Ω<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = 10<sup>a/20</sup>___<br>\n"
"___A = (L+1) / (L−1)___<br><br>\n"
"___R2 = 2·√(L · Z<sub>in</sub> · Z<sub>ut</"
"sub>) / (L−1)___<br>\n"
"___R1 = Z<sub>in</sub> · A − R2___<br>\n"
"___R3 = Z<sub>ut</sub> · A − R2___\n"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:33
msgid "Note: Values are minimal values"
msgstr "Obs! Värdena är minimivärden"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:57
msgid "Class 1"
msgstr "Klass 1"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:58
msgid "Class 2"
msgstr "Klass 2"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:59
msgid "Class 3"
msgstr "Klass 3"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:60
msgid "Class 4"
msgstr "Klass 4"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:61
msgid "Class 5"
msgstr "Klass 5"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:62
msgid "Class 6"
msgstr "Klass 6"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:73
msgid "Lines width"
msgstr "Ledarbredd"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:74
msgid "Min clearance"
msgstr "Min isolationsavstånd"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:75
msgid "Via: (diam - drill)"
msgstr "Via: (diam - borr)"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:76
msgid "Plated Pad: (diam - drill)"
msgstr "Plated Pad: (diam - borr)"
#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:77
msgid "NP Pad: (diam - drill)"
msgstr "NP Pad: (diam - borr)"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:47
msgid "AWG0000"
msgstr "AWG0000"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:48
msgid "AWG000"
msgstr "AWG000"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:49
msgid "AWG00"
msgstr "AWG00"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:50
msgid "AWG0"
msgstr "AWG0"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:51
msgid "AWG1"
msgstr "AWG1"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:52
msgid "AWG2"
msgstr "AWG2"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:53
msgid "AWG3"
msgstr "AWG3"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:54
msgid "AWG4"
msgstr "AWG4"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:55
msgid "AWG5"
msgstr "AWG5"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:56
msgid "AWG6"
msgstr "AWG6"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:57
msgid "AWG7"
msgstr "AWG7"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:58
msgid "AWG8"
msgstr "AWG8"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:59
msgid "AWG9"
msgstr "AWG9"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:60
msgid "AWG10"
msgstr "AWG10"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:61
msgid "AWG11"
msgstr "AWG11"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:62
msgid "AWG12"
msgstr "AWG12"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:63
msgid "AWG13"
msgstr "AWG13"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:64
msgid "AWG14"
msgstr "AWG14"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:65
msgid "AWG15"
msgstr "AWG15"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:66
msgid "AWG16"
msgstr "AWG16"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:67
msgid "AWG17"
msgstr "AWG17"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:68
msgid "AWG18"
msgstr "AWG18"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:69
msgid "AWG19"
msgstr "AWG19"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:70
msgid "AWG20"
msgstr "AWG20"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:71
msgid "AWG21"
msgstr "AWG21"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:72
msgid "AWG22"
msgstr "AWG22"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:73
msgid "AWG23"
msgstr "AWG23"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:74
msgid "AWG24"
msgstr "AWG24"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:75
msgid "AWG25"
msgstr "AWG25"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:76
msgid "AWG26"
msgstr "AWG26"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:77
msgid "AWG27"
msgstr "AWG27"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:78
msgid "AWG28"
msgstr "AWG28"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:79
msgid "AWG29"
msgstr "AWG29"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:80
msgid "AWG30"
msgstr "AWG30"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:212
msgid "Electrical Resistivity in Ohm*m at 20 deg C"
msgstr "Elektrisk resistivitet i Ohm * m vid 20 grader C"
#: pcb_calculator/calculator_panels/panel_cable_size.cpp:236
msgid "Temperature coefficient"
msgstr "Temperaturkoefficient"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:26
msgid "Wire properties"
msgstr "Ledningsegenskaper"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:34
msgid "Standard Size:"
msgstr "Standardstorlek:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:58
#: pcbnew/dialogs/dialog_board_statistics.cpp:107
msgid "Area:"
msgstr "Area:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:65
msgid "mm^2"
msgstr "mm^2"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:69
msgid "Conductor resistivity:"
msgstr "Ledarresistivitet:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:71
msgid "Specific resistance in Ohm*m at 20 deg C"
msgstr ""
"Elektrisk resistivitet (specifikt motstånd) i ohm * meter vid 20 grader C"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:83
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:105
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:60
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:79
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:100
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:136
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:158
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:96
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:757
msgid "..."
msgstr "..."
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:89
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:75
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:142
msgid "ohm-meter"
msgstr "ohmmeter"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:93
msgid "Temperature Coefficient:"
msgstr "Temperaturkoefficient:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:95
msgid "Thermal coefficient at 20 deg C"
msgstr "Temperaturkoefficient vid 20 grader C"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:114
msgid "Linear resistance:"
msgstr "Linjär resistans:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:126
#, c-format
msgid "Frequency for 100% skin depth:"
msgstr "Frekvens för 100% skinndjup:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:138
msgid "Ampacity:"
msgstr "Märkström:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:156
msgid "Application"
msgstr "Applikation"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:164
msgid "Cable temperature:"
msgstr "Kabeltemperatur:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:166
msgid "Off-Load max conductor temp. Reference: 20 deg C"
msgstr "Högsta temperatur för obelastad ledare. Referens: 20 grader C"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:175
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:40
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:55
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:49
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:176
msgid "deg C"
msgstr "grad C"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:179
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:92
msgid "Current:"
msgstr "Ström:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:190
msgid "Length:"
msgstr "Längd:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:192
msgid "Length includes the return path"
msgstr "Längd inkluderar återledare"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:204
msgid "Resistance DC:"
msgstr "DC-resistans:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:206
msgid "DC Resistance of the conductor"
msgstr "Ledarens likströmsresistans"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:213
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:158
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:256
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:234
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:344
msgid "ohm"
msgstr "ohm"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:217
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:162
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:260
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:238
msgid "Voltage drop:"
msgstr "Spänningsfall:"
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:229
msgid "Dissipated power:"
msgstr "Avgiven effekt:"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:20
msgid "10% / 5%"
msgstr "10% / 5%"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:20
msgid "<= 2%"
msgstr "<= 2%"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:22
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:54
msgid "Tolerance"
msgstr "Tolerans"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:34
msgid "1st Band"
msgstr "1: a bandet"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:38
msgid "2nd Band"
msgstr "2: a bandet"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:42
msgid "3rd Band"
msgstr "3: e bandet"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:46
msgid "4th Band"
msgstr "4: e bandet"
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:50
msgid "Multiplier"
msgstr "Multiplikator"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:32
msgid "Voltage > 500 V:"
msgstr "Spänning > 500 V:"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:39
msgid "Update Values"
msgstr "Uppdatera värden"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:47
msgid "Note: Values are minimal values (from IPC 2221)"
msgstr "Obs: Värdena är minimivärden (från IPC 2221)"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:72
msgid "B1"
msgstr "B1"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:73
msgid "B2"
msgstr "B2"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:74
msgid "B3"
msgstr "B3"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:75
msgid "B4"
msgstr "B4"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:77
msgid "A6"
msgstr "A6"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:78
msgid "A7"
msgstr "A7"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:94
msgid "0 .. 15 V"
msgstr "0 .. 15 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:95
msgid "16 .. 30 V"
msgstr "16 .. 30V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:96
msgid "31 .. 50 V"
msgstr "31 .. 50 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:97
msgid "51 .. 100 V"
msgstr "51 .. 100 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:98
msgid "101 .. 150 V"
msgstr "101 .. 150 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:99
msgid "151 .. 170 V"
msgstr "151 .. 170 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:100
msgid "171 .. 250 V"
msgstr "171 .. 250 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:101
msgid "251 .. 300 V"
msgstr "251 .. 300 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:102
msgid "301 .. 500 V"
msgstr "301 .. 500 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:103
msgid " > 500 V"
msgstr " > 500 V"
#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:113
msgid ""
"* B1 - Internal Conductors\n"
"* B2 - External Conductors, uncoated, sea level to 3050 m\n"
"* B3 - External Conductors, uncoated, over 3050 m\n"
"* B4 - External Conductors, with permanent polymer coating (any elevation)\n"
"* A5 - External Conductors, with conformal coating over assembly (any "
"elevation)\n"
"* A6 - External Component lead/termination, uncoated\n"
"* A7 - External Component lead termination, with conformal coating (any "
"elevation)"
msgstr ""
"* B1 - Interna ledare\n"
"* B2 - Externa ledare, oisolerad, upp till 3050 m.ö.h.\n"
"* B3 - Externa ledare, oisolerad, över 3050 m.ö.h.\n"
"* B4 - Externa ledare, med permanent polymerbeläggning (valfri höjd)\n"
"* A5 - Externa ledare, med kretskortslack över montering (valfri höjd)\n"
"* A6 - Extern komponentbensanslutning, obelagd\n"
"* A7 - Extern komponentbensavslutning, med kretskortslack (valfri höjd)"
#: pcb_calculator/calculator_panels/panel_eseries.cpp:55
#: pcb_calculator/calculator_panels/panel_eseries.cpp:141
#: pcb_calculator/calculator_panels/panel_eseries.cpp:160
#: pcb_calculator/calculator_panels/panel_eseries.cpp:186
msgid "Exact"
msgstr "Exakt"
#: pcb_calculator/calculator_panels/panel_eseries.cpp:169
#: pcb_calculator/calculator_panels/panel_eseries.cpp:192
msgid "Not worth using"
msgstr "Inte värt att använda"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:21
msgid "Inputs"
msgstr "Ingångar"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:29
msgid "Required resistance:"
msgstr "Nödvändigt motstånd:"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:36
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:47
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:58
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:148
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:162
msgid "kOhm"
msgstr "kOhm"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:40
msgid "Exclude value 1:"
msgstr "Uteslut värde 1:"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:51
msgid "Exclude value 2:"
msgstr "Uteslut värde 2:"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:71
msgid "E1"
msgstr "E1"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:74
msgid "E3"
msgstr "E3"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:77
msgid "E6"
msgstr "E6"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:81
msgid "E12"
msgstr "E12"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:84
msgid "E24"
msgstr "E24"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:94
msgid "Solutions"
msgstr "Lösningar"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:102
msgid "Simple solution:"
msgstr "Enkel lösning:"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:111
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:131
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:151
msgid "Approximation:"
msgstr "Approximation:"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:122
msgid "3R solution:"
msgstr "3R-lösning:"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:142
msgid "4R solution:"
msgstr "4R-lösning:"
#: pcb_calculator/calculator_panels/panel_eseries_base.cpp:168
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:123
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:221
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:98
msgid "Calculate"
msgstr "Beräkna"
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:231
msgid "Current calculation is underestimated due to long fusing time."
msgstr "Nuvarande beräkning är i underkant på grund av lång utlöstningstid."
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:31
msgid "Ambient temperature:"
msgstr "Omgivningstemperatur:"
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:48
msgid "Melting point:"
msgstr "Smältpunkt:"
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:62
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:117
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:25
msgid "Track width:"
msgstr "Ledarbredd:"
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:77
msgid "Track thickness:"
msgstr "Ledartjocklek:"
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:106
msgid "Time to fuse:"
msgstr "Utlösningstid:"
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:113
msgid "s"
msgstr "s"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:41
msgid "Platinum"
msgstr "Platina"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:42
msgid "Gold"
msgstr "Guld"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:43
msgid "Titanium"
msgstr "Titan"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:44
msgid "Stainless steel 18-9"
msgstr "Rostfritt stål 18-9"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:45
msgid "Silver"
msgstr "Silver"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:46
msgid "Mercury"
msgstr "Kvicksilver"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:47
msgid "Nickel"
msgstr "Nickel"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:48
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:839
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:30
msgid "Copper"
msgstr "Koppar"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:49
msgid "Copper-Aluminium"
msgstr "Koppar-Aluminium"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:50
msgid "Brass"
msgstr "Mässing"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:51
msgid "Bronze"
msgstr "Brons"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:52
msgid "Tin"
msgstr "Tenn"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:53
msgid "Lead"
msgstr "Bly"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:54
msgid "Aluminium-Copper"
msgstr "Aluminium-Koppar"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:55
msgid "Cast iron"
msgstr "Gjutjärn"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:56
msgid "Carbon steel"
msgstr "Kolstål"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:57
msgid "Aluminium"
msgstr "Aluminium"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:58
msgid "Cadmium"
msgstr "Kadmium"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:59
msgid "Iron"
msgstr "Järn"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:60
msgid "Chrome"
msgstr "Krom"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:61
msgid "Zinc"
msgstr "Zink"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:62
msgid "Manganese"
msgstr "Mangan"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:63
msgid "Magnesium"
msgstr "Magnesium"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:74
msgid ""
"This table shows the difference in electrochemical potential between various "
"metals and alloys. A positive number indicates that the row is anodic and "
"the column is cathodic.\n"
"Galvanic corrosion affects different metals in contact and under certain "
"conditions.\n"
"The anode of an electrochemical pair gets oxidized and eaten away, while the "
"cathode gets dissolved metals plated onto it but stays protected.\n"
"EN 50310 suggests a voltage difference below 300mV. Known practices make use "
"of a third interface metal in between the main pair(ie the ENIG surface "
"finish)."
msgstr ""
"Denna tabell visar skillnaden i elektrokemisk potential mellan olika "
"metaller och legeringar. Ett positivt tal visar att raden är anodisk och "
"kolumnen katodisk.\n"
"Galvanisk korrosion påverkar olika metaller i kontakt och under vissa "
"förhållanden.\n"
"Anoden i ett elektrokemiskt par oxideras och fräts bort, medan katoden får "
"upplösta metaller pläterad på sig och är skyddad.\n"
"EN 50310 föreslår en potentialdifferens under 300mV. Känd praxis använder "
"sig av en tredje gränssnittsmetall mellan huvudparet (t.ex. plätering av typ "
"ENIG)."
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:34
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:39
msgid "Copper (Cu)"
msgstr "Koppar (Cu)"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:62
msgid "Threshold voltage:"
msgstr "Tröskelspänning:"
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:71
#: pcb_calculator/widgets/unit_selector.cpp:255
msgid "mV"
msgstr "mV"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:158
msgid "PCB Calculator data file"
msgstr "PCB-kalkylator-datafil"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:161
msgid "Select PCB Calculator Data File"
msgstr "Välj PCB Calculator Data File"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:176
msgid "Do you want to load this file and replace current regulator list?"
msgstr "Vill du ladda den här filen och ersätta den aktuella tillsynslistan?"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:193
#, c-format
msgid "Unable to read data file '%s'."
msgstr "Kunde inte läsa datafil '%s'."
#: pcb_calculator/calculator_panels/panel_regulator.cpp:221
msgid "This regulator is already in list. Aborted"
msgstr "Denna regulator finns redan i listan. Avbruten"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:253
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:117
msgid "Remove Regulator"
msgstr "Ta bort regulatorn"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:338
msgid "Vout must be greater than vref"
msgstr "Vout måste vara större än vref"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:344
msgid "Vref set to 0 !"
msgstr "Vref satt till 0!"
#: pcb_calculator/calculator_panels/panel_regulator.cpp:350
msgid "Incorrect value for R1 R2"
msgstr "Felaktigt värde för R1 R2"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:29
msgid ""
"Type of the regulator.\n"
"There are 2 types:\n"
"- regulators which have a dedicated sense pin for the voltage regulation.\n"
"- 3 terminal pins."
msgstr ""
"Typ av regulator.\n"
"Det finns två typer:\n"
"- regulatorer som har ett särskilt avkänningsstift för spänningsreglering.\n"
"- 3 anslutningar."
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:33
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:52
msgid "Standard Type"
msgstr "Standardtyp"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:33
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:52
msgid "3 Terminal Type"
msgstr "3 Terminal typ"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:55
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:183
msgid "Formula"
msgstr "Formel"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:79
msgid "Regulator"
msgstr "Spänningsregulator"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:86
msgid "Regulators data file:"
msgstr "Regulatorns datafil:"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:88
msgid "The name of the data file which stores known regulators parameters."
msgstr "Namnet på datafilen som lagrar kända regulatorparametrar."
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:98
msgid "Browse"
msgstr "Bläddra"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:107
msgid "Edit Regulator"
msgstr "Redigera regulator"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:108
msgid "Edit the current selected regulator."
msgstr "Redigera den aktuella valda regulatorn."
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:112
msgid "Add Regulator"
msgstr "Lägg till regulator"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:113
msgid "Enter a new item to the current list of available regulators"
msgstr ""
"Lägg till ett nytt objekt i den aktuella listan över tillgängliga "
"spänningsregulatorer"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:118
msgid "Remove an item from the current list of available regulators"
msgstr ""
"Ta bort ett objekt från den aktuella listan över tillgängliga "
"spänningsregulatorer"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:141
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:118
msgid "R1:"
msgstr "R1:"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:155
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:129
msgid "R2:"
msgstr "R2:"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:169
msgid "Vout:"
msgstr "Vut:"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:183
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:37
msgid "Vref:"
msgstr "Vref:"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:185
msgid ""
"The internal reference voltage of the regulator.\n"
"Should not be 0."
msgstr ""
"Regulatorns interna referensspänning.\n"
"Bör inte vara 0."
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:199
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:61
msgid "Iadj:"
msgstr "Iadj:"
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:201
msgid "For 3 terminal regulators only, the Adjust pin current."
msgstr "Endast för treterminalsregulatorer: Strömstyrkan i avkänningsstiftet."
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:208
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:68
msgid "uA"
msgstr "uA"
#: pcb_calculator/calculator_panels/panel_rf_attenuators.cpp:220
#, c-format
msgid "Attenuation more than %f dB"
msgstr "Dämpning mer än %f dB"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:23
msgid "Pi"
msgstr "Pi"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:23
msgid "Tee"
msgstr "Tee"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:23
msgid "Bridged tee"
msgstr "Bridged Tee"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:23
msgid "Resistive splitter"
msgstr "Resistiv splitter"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:25
msgid "Attenuators"
msgstr "Dämpare"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:50
msgid "Attenuation (a):"
msgstr "Dämpning (a):"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:59
msgid "dB"
msgstr "dB"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:63
msgid "Zin:"
msgstr "Zin:"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:76
msgid "Zout:"
msgstr "Zut:"
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:140
msgid "R3:"
msgstr "R3:"
#: pcb_calculator/calculator_panels/panel_track_width.cpp:61
msgid "Temperature rise"
msgstr "Temperaturstegring"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:31
msgid "Current (I):"
msgstr "Ström (I):"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:42
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:167
msgid "Temperature rise:"
msgstr "Temperaturstegring:"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:53
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:54
msgid "Conductor length:"
msgstr "Ledarlängd:"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:66
msgid "Copper resistivity:"
msgstr "Kopparresistivitet:"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:95
msgid "External Layer Traces"
msgstr "Ledare på yttre lager"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:103
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:201
msgid "Trace width (W):"
msgstr "Ledarbredd (W):"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:117
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:215
msgid "Trace thickness (H):"
msgstr "Ledartjocklek (H):"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:138
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:236
msgid "Cross-section area:"
msgstr "Tvärsnittsarea:"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:146
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:244
msgid "mm ^ 2"
msgstr "mm ^ 2"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:150
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:248
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:226
msgid "Resistance:"
msgstr "Motstånd:"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:174
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:272
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:250
msgid "Power loss:"
msgstr "Effektförlust:"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:182
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:280
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:258
#: pcb_calculator/widgets/unit_selector.cpp:280
msgid "W"
msgstr "W"
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:193
msgid "Internal Layer Traces"
msgstr "Ledare på inre lager"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Microstrip Line"
msgstr "Mikrostrip-ledning"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coplanar wave guide"
msgstr "Koplanär vågledare"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coplanar wave guide w/ ground plane"
msgstr "Koplanär vågledare med jordplan"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Rectangular Waveguide"
msgstr "Rektangulär vågledare"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coaxial Line"
msgstr "Koaxial linje"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coupled Microstrip Line"
msgstr "Kopplad Microstrip Line"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Stripline"
msgstr "Stripline"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Twisted Pair"
msgstr "Tvinnat par"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:25
msgid "Transmission Line Type"
msgstr "Transmissionslinjetyp"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:42
msgid "Substrate Parameters"
msgstr "Substratparametrar"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:50
msgid "Er:"
msgstr "Er:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:69
msgid "Tan delta:"
msgstr "Tan delta:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:88
msgid "Rho:"
msgstr "Rho:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:90
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:126
msgid "Specific resistance in ohms * meters"
msgstr ""
"Pläteringsmaterialets elektriska resistivitet (specifika motstånd) i ohm * "
"meter"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:109
msgid "H:"
msgstr "H:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:121
msgid "H_t:"
msgstr "H_t:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:133
msgid "T:"
msgstr "T:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:145
msgid "Rough:"
msgstr "Grov:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:157
msgid "Insulator mu:"
msgstr "Isolator mu:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:169
msgid "Conductor mu:"
msgstr "Ledar mu:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:188
msgid "Component Parameters"
msgstr "Komponentparametrar"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:196
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:27
msgid "Frequency:"
msgstr "Frekvens:"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:233
msgid "Physical Parameters"
msgstr "Fysiska parametrar"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:298
msgid "Analyze"
msgstr "Analysera"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:307
msgid "Synthesize"
msgstr "Syntetisera"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:320
msgid "Electrical Parameters"
msgstr "Elektriska parametrar"
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:371
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:218
msgid "Results"
msgstr "Resultat"
#: pcb_calculator/calculator_panels/panel_via_size.cpp:92
#: pcb_calculator/calculator_panels/panel_wavelength.cpp:258
#: pcb_calculator/transline_dlg_funct.cpp:43
msgid "Relative Dielectric Constants"
msgstr "Relativa dielektriska konstanter"
#: pcb_calculator/calculator_panels/panel_via_size.cpp:105
msgid "Electrical Resistivity in Ohm*m"
msgstr "Elektrisk resistivitet i Ohm * m"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:31
msgid "Finished hole diameter (D):"
msgstr "Färdig håldiameter (D):"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:45
msgid "Plating thickness (T):"
msgstr "Pläteringstjocklek (T):"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:57
msgid "Via length:"
msgstr "Via längd:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:59
msgid "Via length is the board thickness for through hole vias"
msgstr "Via-längd för genomgående vior är mönsterkortets tjocklek"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:71
msgid "Via pad diameter:"
msgstr "Viats kragdiameter:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:73
msgid "Diameter of pad surrounding via (annular ring)"
msgstr "Diameter på kopparytan som omger en via (krage)"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:85
msgid "Clearance hole diameter:"
msgstr "Isolationshålets diameter:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:87
msgid "Diameter of clearance hole in ground plane(s)"
msgstr ""
"Isolationshålets diameter i kopparzon, när viat inte är anslutet till "
"kopparzonen"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:99
msgid "Z0:"
msgstr "Z0:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:101
msgid "Characteristic impedance of conductor"
msgstr "Ledarens karakteristiska impedans"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:113
msgid "Applied current:"
msgstr "Genomfluten ström:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:124
msgid "Plating resistivity:"
msgstr "Pläteringens resistivitet:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:146
msgid "Substrate relative permittivity:"
msgstr "Substratets permittivitetstal:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:148
msgid "Relative dielectric constant (epsilon r)"
msgstr "Relativ dielektrisk konstant (epsilon r)"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:169
msgid "Maximum acceptable rise in temperature"
msgstr "Maximal acceptabel temperaturstegring"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:180
msgid "Pulse rise time:"
msgstr "Pulsstigtid:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:182
msgid "Pulse rise time to calculate reactance"
msgstr "Pulsstigtid för att beräkna reaktans"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:189
#: pcb_calculator/widgets/unit_selector.cpp:316
msgid "ns"
msgstr "ns"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:191
msgid "nanoseconds"
msgstr "nanosekunder"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:201
msgid ""
"Warning:\n"
"Via pad diameter >= Clearance hole diameter.\n"
"Some parameters cannot be calculated for a via inside a copper zone."
msgstr ""
"Varning:\n"
"Viats kragdiameter >= Diameter för frigångshål i kopparzon.\n"
"Vissa parametrar kan inte beräknas för en via inuti en kopparzon."
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:262
msgid "Thermal resistance:"
msgstr "Termisk resistans:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:264
msgid "Using thermal conductivity value 401 Watts/(meter-Kelvin)"
msgstr "Använd värmeledningsförmåga 401 W / (meter*Kelvin)"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:272
msgid "deg C/W"
msgstr "°C/W"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:276
msgid "Estimated ampacity:"
msgstr "Uppskattad ampacitet:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:278
msgid "Based on temperature rise"
msgstr "Baserat på temperaturstegring"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:290
msgid "Capacitance:"
msgstr "Kapacitans:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:298
msgid "pF"
msgstr "pF"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:300
msgid "pico-Farad"
msgstr "pikofarad"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:304
msgid "Rise time degradation:"
msgstr "Stigtidsförsämring:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:306
msgid "Rise time degradation for given Z0 and calculated capacitance"
msgstr ""
"Förlängning av signalens stigtid för given impedans Z0 och beräknad "
"kapacitans"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:314
#: pcb_calculator/widgets/unit_selector.cpp:317
msgid "ps"
msgstr "ps"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:316
msgid "picoseconds"
msgstr "pikosekunder"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:320
msgid "Inductance:"
msgstr "Induktans:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:328
msgid "nH"
msgstr "nH"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:330
msgid "nano-Henry"
msgstr "nanohenry"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:334
msgid "Reactance:"
msgstr "Reaktans:"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:336
msgid "Inductive reactance for given rise time and calculated inductance"
msgstr "Induktiv reaktans för given stigtid och beräknad induktans"
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:355
msgid "Top view of via"
msgstr "Ovanifrån av via"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:39
msgid "Period:"
msgstr "Periodtid:"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:51
msgid "Wavelength in vacuum:"
msgstr "Våglängd i vacuum:"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:63
msgid "Wavelength in medium:"
msgstr "Våglängd i medium:"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:75
msgid "Speed in medium:"
msgstr "Hastighet i medium:"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:87
msgid "er:"
msgstr "εr:"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:89
msgid "relative permittivity (dielectric constant)"
msgstr "permittivitetstal (dielektrisk konstant)"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:99
msgid "mur:"
msgstr "µr:"
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:101
msgid "relative permeability"
msgstr "relativ permeabilitet"
#: pcb_calculator/datafile_read_write.cpp:76
msgid "Data file error."
msgstr "Fel i datafilen."
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:44
msgid "Volt"
msgstr "Volt"
#: pcb_calculator/dialogs/dialog_regulator_form_base.h:59
msgid "Regulator Parameters"
msgstr "Regulatorparametrar"
#: pcb_calculator/eseries_help.h:2
msgid ""
"E-series are defined in IEC 60063.\n"
"\n"
"Available values are approximately equally spaced in a logarithmic scale.\n"
"\n"
"\tE24(5%): 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 "
"4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1\n"
"\tE12(10%): 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2\n"
"\tE6(20%): 1.0 - 1.5 - 2.2 - 3.3 - 4.7 - 6.8 -\n"
"\tE3(50%): 1.0 - - - 2.2 - - - 4.7 - - -\n"
"\tE1 : 1.0 - - - - - - - - - - -\n"
"\n"
"- This calculator finds combinations of standard E-series (between 10Ω and "
"1MΩ) to create arbitrary values.\n"
"- You can enter the required resistance from 0.0025 to 4000 kΩ.\n"
"- Solutions using up to 4 components are given.\n"
"\n"
"The requested value is always excluded from the solution set.<br>\n"
"Optionally up to two additional values can be excluded in case of component "
"availability problems.\n"
"\n"
"Solutions are given in the following formats:\n"
"\n"
"\tR1 + R2 +...+ Rn\tresistors in series\n"
"\tR1 | R2 |...| Rn\tresistors in parallel\n"
"\tR1 + (R2|R3)...\t\tany combination of the above\n"
msgstr ""
"E-serierna är definierade i IEC 60063.\n"
"\n"
"Tillgängliga värden är ungefärligt jämnt fördelade i en logaritmisk skala.\n"
"\n"
"\tE24(5%): 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 "
"4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1\n"
"\tE12(10%): 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2\n"
"\tE6(20%): 1.0 - 1.5 - 2.2 - 3.3 - 4.7 - 6.8 -\n"
"\tE3(50%): 1.0 - - - 2.2 - - - 4.7 - - -\n"
"\tE1 : 1.0 - - - - - - - - - - -\n"
"\n"
"- Denna kalkylator hittar kombinationer av E-serie-värden (mellan 10Ω och "
"1MΩ) för att skapa godtyckliga värden.'\n"
"- Du kan ange nödvändig resistans från 0.0025 till 4000kΩ.\n"
"- Lösningar som använder upp till 4 komponenter tillhandahålls.\n"
"\n"
"Det önskade värdet utesluts alltid ur lösningen.<br>\n"
"Upp till två ytterligare värden kan exkluderas om så önskas (ex. om dessa "
"värden inte är tillgängliga).\n"
"\n"
"Lösningar ges i följande format:\n"
"\n"
"\tR1 + R2 +...+ Rn\tseriekopplade motstånd\n"
"\tR1 | R2 |...| Rn\tparallellkopplade motstånd\n"
"\tR1 + (R2|R3)...\t\tnågon kombination av ovanstående\n"
#: pcb_calculator/fusing_current_help.h:2
msgid ""
"You can use the this calculator to check if a small track can handle a large "
"current for a short period of time.<br>\n"
"This tool allows you to design a track fuse but should be used as an "
"estimate only.\n"
"\n"
"The calculator estimates the energy required to heat the wire up<br>\n"
"to its melting point as well as the energy required for the change of phase."
"<br>\n"
"This energy is then compared to the one dissipated by the wire resistance."
msgstr ""
"Du kan använda detta beräkningsverktyg för att kontrollera om en liten "
"ledare kan hantera en hög ström under ett kort tidsintervall.<br>\n"
"Detta verktyg låter dig designa en ledare som säkring, men skall endast "
"användas som en uppskattning.\n"
"\n"
"Beräkningsverktyget uppskattar energin som behövs för att hetta upp "
"ledaren<br>\n"
"till smältpunkten, såväl som energin som behövs för tillståndsförändring."
"<br>\n"
"Denna energi jämförs sedan med den avgivna energin i ledarresistansen."
#: pcb_calculator/pcb_calculator_frame.cpp:80
msgid "General system design"
msgstr "Allmän systemdesign"
#: pcb_calculator/pcb_calculator_frame.cpp:83
msgid "Regulators"
msgstr "Spänningsregulatorer"
#: pcb_calculator/pcb_calculator_frame.cpp:85
msgid "Power, current and isolation"
msgstr "Effekt, ström och isolering"
#: pcb_calculator/pcb_calculator_frame.cpp:88
msgid "Electrical Spacing"
msgstr "Elektriskt isolationsavstånd"
#: pcb_calculator/pcb_calculator_frame.cpp:95
msgid "Fusing Current"
msgstr "Utlösningsström"
#: pcb_calculator/pcb_calculator_frame.cpp:98
msgid "Cable Size"
msgstr "Kabelstorlek"
#: pcb_calculator/pcb_calculator_frame.cpp:100
msgid "High speed"
msgstr "Högfrekvens"
#: pcb_calculator/pcb_calculator_frame.cpp:104
msgid "Wavelength"
msgstr "Våglängd"
#: pcb_calculator/pcb_calculator_frame.cpp:106
msgid "RF Attenuators"
msgstr "RF-dämpare"
#: pcb_calculator/pcb_calculator_frame.cpp:108
msgid "Transmission Lines"
msgstr "Transmissionslinjer"
#: pcb_calculator/pcb_calculator_frame.cpp:110
#, fuzzy
msgid "Memo"
msgstr "Memo"
#: pcb_calculator/pcb_calculator_frame.cpp:113
msgid "E-Series"
msgstr "E-serien"
#: pcb_calculator/pcb_calculator_frame.cpp:115
msgid "Color Code"
msgstr "Färgkoder"
#: pcb_calculator/pcb_calculator_frame.cpp:117
msgid "Board Classes"
msgstr "Mönsterkortsklasser"
#: pcb_calculator/pcb_calculator_frame.cpp:119
msgid "Galvanic Corrosion"
msgstr "Galvanisk korrosion"
#: pcb_calculator/pcb_calculator_frame.cpp:268
msgid "Write Data Failed"
msgstr "Fel vid skrivning av data"
#: pcb_calculator/pcb_calculator_frame.cpp:272
msgid ""
"No data filename to save modifications.\n"
"Do you want to exit and abandon your changes?"
msgstr ""
"Inget datafilsnamn att spara ändringar till.\n"
"Vill du avsluta och förkasta dina ändringar?"
#: pcb_calculator/pcb_calculator_frame.cpp:282
#, c-format
msgid ""
"Unable to write file '%s'\n"
"Do you want to exit and abandon your changes?"
msgstr ""
"Det gick inte att skriva fil '%s'\n"
"Vill du avsluta och förkasta dina ändringar?"
#: pcb_calculator/tracks_width_versus_current_formula.h:2
msgid ""
"If you specify the maximum current, then the trace widths will be calculated "
"to suit.\n"
"\n"
"If you specify one of the trace widths, the maximum current it can handle "
"will be calculated. The width for the other trace to also handle this "
"current will then be calculated.\n"
"\n"
"The controlling value is shown in bold.\n"
"\n"
"The calculations are valid for currents up to 35 A (external) or 17.5 A "
"(internal), temperature rises up to 100 °C, and widths of up to 400 mils (10 "
"mm).\n"
"\n"
"The formula, from IPC 2221, is\n"
"<center>___I = K · ΔT<sup>0.44</sup> · (W · "
"H)<sup>0.725</sup>___</center>\n"
"where:<br>\n"
"___I___ is maximum current in A<br>\n"
"___ΔT___ is temperature rise above ambient in °C<br>\n"
"___W___ is width in mils<br>\n"
"___H___ is thickness (height) in mils<br>\n"
"___K___ is 0.024 for internal traces or 0.048 for external traces\n"
msgstr ""
"Om du anger maximal ström beräknas nödvändig ledarbredd för att hantera "
"angiven ström.\n"
"\n"
"Om du anger en av ledarbredderna beräknas den maximala strömmen ledaren kan "
"hantera. Därefter beräknas bredden för den andra ledaren som också ska "
"hantera samma ström.\n"
"\n"
"Det styrande värdet visas i fetstil.\n"
"\n"
"Beräkningarna gäller för strömmar upp till 35 A (yttre lager) eller 17,5 A "
"(inre lager), temperaturhöjningar upp till 100 ° C och bredder upp till 400 "
"mil (10 mm).\n"
"\n"
"Formeln, från IPC 2221, är \n"
"<center>___I = K ⋅ ΔT<sup>0.44</sup> ⋅ (W ⋅ "
"H)<sup>0.725</sup>___</center> \n"
"där: \n"
"___I___ är maximal ström i Ampere \n"
"___ΔT___ är temperaturhöjning över omgivningstemperatur i °C \n"
"___W___ är bredd i mils \n"
"___H___ är tjocklek (höjd) i mils \n"
"___K___ är 0.024 för interna spår eller 0,048 för externa spår\n"
#: pcb_calculator/transline_dlg_funct.cpp:61
msgid "Dielectric Loss Factor"
msgstr "Dielektrisk förlustfaktor"
#: pcb_calculator/transline_dlg_funct.cpp:79
msgid "Specific Resistance"
msgstr "Specifik motstånd"
#: pcb_calculator/transline_ident.cpp:92
msgid "Substrate relative permittivity (dielectric constant)"
msgstr "Substratets permittivitetstal (dielektrisk konstant)"
#: pcb_calculator/transline_ident.cpp:96
msgid "Dielectric loss (dissipation factor)"
msgstr "Dielektrisk förlustfaktor"
#: pcb_calculator/transline_ident.cpp:102
msgid ""
"Electrical resistivity or specific electrical resistance of conductor "
"(ohm*meter)"
msgstr ""
"Elektrisk resistivitet eller specifikt elektriskt motstånd hos ledare "
"(ohm*meter)"
#: pcb_calculator/transline_ident.cpp:109
msgid "Frequency of the input signal"
msgstr "Ingångssignalens frekvens"
#: pcb_calculator/transline_ident.cpp:118
#: pcb_calculator/transline_ident.cpp:160
#: pcb_calculator/transline_ident.cpp:194
#: pcb_calculator/transline_ident.cpp:230
#: pcb_calculator/transline_ident.cpp:265
#: pcb_calculator/transline_ident.cpp:350
#: pcb_calculator/transline_ident.cpp:384
#, c-format
msgid "Effective %s:"
msgstr "Effektiv %s:"
#: pcb_calculator/transline_ident.cpp:119
#: pcb_calculator/transline_ident.cpp:161
#: pcb_calculator/transline_ident.cpp:195
#: pcb_calculator/transline_ident.cpp:231
#: pcb_calculator/transline_ident.cpp:266
#: pcb_calculator/transline_ident.cpp:351
#: pcb_calculator/transline_ident.cpp:385
msgid "Conductor losses:"
msgstr "Ledningsförluster:"
#: pcb_calculator/transline_ident.cpp:120
#: pcb_calculator/transline_ident.cpp:162
#: pcb_calculator/transline_ident.cpp:196
#: pcb_calculator/transline_ident.cpp:232
#: pcb_calculator/transline_ident.cpp:267
#: pcb_calculator/transline_ident.cpp:352
#: pcb_calculator/transline_ident.cpp:386
msgid "Dielectric losses:"
msgstr "Dielektriska förluster:"
#: pcb_calculator/transline_ident.cpp:121
#: pcb_calculator/transline_ident.cpp:163
#: pcb_calculator/transline_ident.cpp:197
#: pcb_calculator/transline_ident.cpp:308
#: pcb_calculator/transline_ident.cpp:353
#: pcb_calculator/transline_ident.cpp:387
msgid "Skin depth:"
msgstr "Skinndjup:"
#: pcb_calculator/transline_ident.cpp:124
#: pcb_calculator/transline_ident.cpp:166
#: pcb_calculator/transline_ident.cpp:200
#: pcb_calculator/transline_ident.cpp:312
#: pcb_calculator/transline_ident.cpp:356
msgid "Height of substrate"
msgstr "Substratets höjd"
#: pcb_calculator/transline_ident.cpp:126
#: pcb_calculator/transline_ident.cpp:314
msgid "Height of box top"
msgstr "Kapslingens (apparatlåda/skärmbox) höjd över transmissionslinjen"
#: pcb_calculator/transline_ident.cpp:129
#: pcb_calculator/transline_ident.cpp:168
#: pcb_calculator/transline_ident.cpp:202
#: pcb_calculator/transline_ident.cpp:316
#: pcb_calculator/transline_ident.cpp:361
msgid "Strip thickness"
msgstr "Ledartjocklek"
#: pcb_calculator/transline_ident.cpp:131
#: pcb_calculator/transline_ident.cpp:318
msgid "Roughness"
msgstr "Grovhet"
#: pcb_calculator/transline_ident.cpp:132
#: pcb_calculator/transline_ident.cpp:319
msgid "Conductor roughness"
msgstr "Ledarens ytojämnhet"
#: pcb_calculator/transline_ident.cpp:135
msgid "substrate"
msgstr "substrat"
#: pcb_calculator/transline_ident.cpp:136
msgid "Relative permeability (mu) of substrate"
msgstr "Relativ permeabilitet (my) för substrat"
#: pcb_calculator/transline_ident.cpp:139
#: pcb_calculator/transline_ident.cpp:171
#: pcb_calculator/transline_ident.cpp:205
#: pcb_calculator/transline_ident.cpp:242
#: pcb_calculator/transline_ident.cpp:277
#: pcb_calculator/transline_ident.cpp:322
#: pcb_calculator/transline_ident.cpp:364
#: pcb_calculator/transline_ident.cpp:394
msgid "conductor"
msgstr "ledare"
#: pcb_calculator/transline_ident.cpp:140
#: pcb_calculator/transline_ident.cpp:172
#: pcb_calculator/transline_ident.cpp:206
#: pcb_calculator/transline_ident.cpp:243
#: pcb_calculator/transline_ident.cpp:278
#: pcb_calculator/transline_ident.cpp:323
#: pcb_calculator/transline_ident.cpp:365
#: pcb_calculator/transline_ident.cpp:395
msgid "Relative permeability (mu) of conductor"
msgstr "Relativ permeabilitet (my) för ledare"
#: pcb_calculator/transline_ident.cpp:144
#: pcb_calculator/transline_ident.cpp:176
#: pcb_calculator/transline_ident.cpp:210
#: pcb_calculator/transline_ident.cpp:327
#: pcb_calculator/transline_ident.cpp:368
msgid "Line width"
msgstr "Ledarbredd"
#: pcb_calculator/transline_ident.cpp:146
#: pcb_calculator/transline_ident.cpp:180
#: pcb_calculator/transline_ident.cpp:214
#: pcb_calculator/transline_ident.cpp:288
#: pcb_calculator/transline_ident.cpp:331
#: pcb_calculator/transline_ident.cpp:370
msgid "Line length"
msgstr "Ledarlängd"
#: pcb_calculator/transline_ident.cpp:149
#: pcb_calculator/transline_ident.cpp:183
#: pcb_calculator/transline_ident.cpp:217
#: pcb_calculator/transline_ident.cpp:254
#: pcb_calculator/transline_ident.cpp:291
#: pcb_calculator/transline_ident.cpp:373
#: pcb_calculator/transline_ident.cpp:412
msgid "Characteristic impedance"
msgstr "Karaktäristisk impedans"
#: pcb_calculator/transline_ident.cpp:152
#: pcb_calculator/transline_ident.cpp:186
#: pcb_calculator/transline_ident.cpp:220
#: pcb_calculator/transline_ident.cpp:257
#: pcb_calculator/transline_ident.cpp:294
#: pcb_calculator/transline_ident.cpp:343
#: pcb_calculator/transline_ident.cpp:376
#: pcb_calculator/transline_ident.cpp:415
msgid "Electrical length"
msgstr "Elektrisk längd"
#: pcb_calculator/transline_ident.cpp:178
#: pcb_calculator/transline_ident.cpp:212
#: pcb_calculator/transline_ident.cpp:329
msgid "Gap width"
msgstr "Gapbredd"
#: pcb_calculator/transline_ident.cpp:229
msgid "ZF(H10) = Ey / Hx:"
msgstr "ZF (H10) = Ey / Hx:"
#: pcb_calculator/transline_ident.cpp:233
#: pcb_calculator/transline_ident.cpp:268
msgid "TE-modes:"
msgstr "TE-lägen:"
#: pcb_calculator/transline_ident.cpp:234
#: pcb_calculator/transline_ident.cpp:269
msgid "TM-modes:"
msgstr "TM-lägen:"
#: pcb_calculator/transline_ident.cpp:238
#: pcb_calculator/transline_ident.cpp:273
msgid "insulator"
msgstr "isolator"
#: pcb_calculator/transline_ident.cpp:239
#: pcb_calculator/transline_ident.cpp:274
msgid "Relative permeability (mu) of insulator"
msgstr "Relativ permeabilitet (my) för isolator"
#: pcb_calculator/transline_ident.cpp:247
msgid "Width of waveguide"
msgstr "Vågledarens bredd"
#: pcb_calculator/transline_ident.cpp:249
msgid "Height of waveguide"
msgstr "Vågledarens höjd"
#: pcb_calculator/transline_ident.cpp:251
msgid "Waveguide length"
msgstr "Vågledarens längd"
#: pcb_calculator/transline_ident.cpp:282
#: pcb_calculator/transline_ident.cpp:403
msgid "Din"
msgstr "Din"
#: pcb_calculator/transline_ident.cpp:283
#: pcb_calculator/transline_ident.cpp:404
msgid "Inner diameter (conductor)"
msgstr "Inre diameter (ledare)"
#: pcb_calculator/transline_ident.cpp:285
#: pcb_calculator/transline_ident.cpp:406
msgid "Dout"
msgstr "D-ut"
#: pcb_calculator/transline_ident.cpp:286
#: pcb_calculator/transline_ident.cpp:407
msgid "Outer diameter (insulator)"
msgstr "Yttre diameter (isolator)"
#: pcb_calculator/transline_ident.cpp:302
#, c-format
msgid "Effective %s (even):"
msgstr "Effektiv %s (jämn):"
#: pcb_calculator/transline_ident.cpp:303
#, c-format
msgid "Effective %s (odd):"
msgstr "Effektiv %s (udda):"
#: pcb_calculator/transline_ident.cpp:304
msgid "Conductor losses (even):"
msgstr "Ledningsförluster (jämn):"
#: pcb_calculator/transline_ident.cpp:305
msgid "Conductor losses (odd):"
msgstr "Ledningsförluster (udda):"
#: pcb_calculator/transline_ident.cpp:306
msgid "Dielectric losses (even):"
msgstr "Dielektriska förluster (jämn):"
#: pcb_calculator/transline_ident.cpp:307
msgid "Dielectric losses (odd):"
msgstr "Dielektriska förluster (udda):"
#: pcb_calculator/transline_ident.cpp:309
msgid "Differential Impedance (Zd):"
msgstr "Differentiell impedans (Zd):"
#: pcb_calculator/transline_ident.cpp:334
msgid "Zeven"
msgstr "Zjämn"
#: pcb_calculator/transline_ident.cpp:335
#, fuzzy
msgid "Even mode impedance (lines driven by common voltages)"
msgstr "Jämnlägesimpedans (linjer som drivs av likfasiga spänningar)"
#: pcb_calculator/transline_ident.cpp:338
msgid "Zodd"
msgstr "Zudda"
#: pcb_calculator/transline_ident.cpp:339
msgid "Odd mode impedance (lines driven by opposite (differential) voltages)"
msgstr ""
"Udda lägesimpedans (linjer som drivs av motsatta (differentiella) spänningar)"
#: pcb_calculator/transline_ident.cpp:358
msgid "Distance between strip and top metal"
msgstr "Avstånd mellan ledare och övre metall"
#: pcb_calculator/transline_ident.cpp:390
msgid "Twists"
msgstr "Vridningar"
#: pcb_calculator/transline_ident.cpp:391
msgid "Number of twists per length"
msgstr "Antal vridningar per längd"
#: pcb_calculator/transline_ident.cpp:399
msgid "environment"
msgstr "omgivning"
#: pcb_calculator/transline_ident.cpp:400
msgid "Relative permittivity of environment"
msgstr "Permittivitetstal för omgivning"
#: pcb_calculator/transline_ident.cpp:409
msgid "Cable length"
msgstr "Kabellängd"
#: pcb_calculator/widgets/unit_selector.cpp:35
msgid "um"
msgstr "um"
#: pcb_calculator/widgets/unit_selector.cpp:36
#: pcb_calculator/widgets/unit_selector.cpp:210
msgid "cm"
msgstr "cm"
#: pcb_calculator/widgets/unit_selector.cpp:37
msgid "mil"
msgstr "mil"
#: pcb_calculator/widgets/unit_selector.cpp:38
#: pcb_calculator/widgets/unit_selector.cpp:213
#: pcbnew/dialogs/dialog_export_idf_base.cpp:48
#: pcbnew/dialogs/dialog_export_step_base.cpp:65
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:67
msgid "inch"
msgstr "tum"
#: pcb_calculator/widgets/unit_selector.cpp:100
msgid "GHz"
msgstr "GHz"
#: pcb_calculator/widgets/unit_selector.cpp:101
msgid "MHz"
msgstr "MHz"
#: pcb_calculator/widgets/unit_selector.cpp:102
msgid "kHz"
msgstr "kHz"
#: pcb_calculator/widgets/unit_selector.cpp:103
msgid "Hz"
msgstr "Hz"
#: pcb_calculator/widgets/unit_selector.cpp:129
msgid "rad"
msgstr "rad"
#: pcb_calculator/widgets/unit_selector.cpp:211
msgid "m"
msgstr "m"
#: pcb_calculator/widgets/unit_selector.cpp:212
msgid "km"
msgstr "km"
#: pcb_calculator/widgets/unit_selector.cpp:214
msgid "feet"
msgstr "fot"
#: pcb_calculator/widgets/unit_selector.cpp:279
msgid "mW"
msgstr "mW"
#: pcb_calculator/widgets/unit_selector.cpp:288
msgid "m/s"
msgstr "m/s"
#: pcb_calculator/widgets/unit_selector.cpp:289
msgid "ft/s"
msgstr "fot/s"
#: pcb_calculator/widgets/unit_selector.cpp:290
msgid "km/h"
msgstr "km/h"
#: pcb_calculator/widgets/unit_selector.cpp:291
msgid "mi/h"
msgstr "miles/h"
#: pcbnew/array_creator.cpp:211
msgid "Create an array"
msgstr "Skapa en matris"
#: pcbnew/autorouter/ar_autoplacer.cpp:889
msgid "Autoplacing components..."
msgstr "Autoplacerar komponenter..."
#: pcbnew/autorouter/ar_autoplacer.cpp:905
#, c-format
msgid "Autoplacing %s"
msgstr "Autoplacerar %s"
#: pcbnew/autorouter/autoplace_tool.cpp:68
#, c-format
msgid "Board edges must be defined on the %s layer."
msgstr "Mönsterkortskanter måste definieras på %s -lagret."
#: pcbnew/autorouter/autoplace_tool.cpp:89
msgid "Autoplace Components"
msgstr "Autoplacera komponenter"
#: pcbnew/autorouter/autoplace_tool.cpp:95
msgid "Autoplace components"
msgstr "Placera komponenterna automatiskt"
#: pcbnew/board.cpp:672 pcbnew/drc/drc_cache_generator.cpp:146
msgid "Tessellating copper zones..."
msgstr "Tessellating kopparzoner ..."
#: pcbnew/board.cpp:913
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:35
msgid "PCB"
msgstr "PCB"
#: pcbnew/board.cpp:1283 pcbnew/dialogs/dialog_board_statistics.cpp:687
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:79
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:32
#: pcbnew/netinfo_item.cpp:106 pcbnew/pcb_draw_panel_gal.cpp:527
#: pcbnew/tools/pcb_control.cpp:1365 pcbnew/widgets/appearance_controls.cpp:334
#: pcbnew/widgets/panel_selection_filter.cpp:190
#: pcbnew/widgets/panel_selection_filter_base.cpp:45
msgid "Pads"
msgstr "Lödytor"
#: pcbnew/board.cpp:1284 pcbnew/dialogs/dialog_board_statistics.cpp:693
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:158
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:77
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:31
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:162
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:29
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:87
#: pcbnew/netinfo_item.cpp:121 pcbnew/pcb_draw_panel_gal.cpp:528
#: pcbnew/widgets/appearance_controls.cpp:333
#: pcbnew/widgets/panel_selection_filter.cpp:189
#: pcbnew/widgets/panel_selection_filter_base.cpp:41
msgid "Vias"
msgstr "Vior"
#: pcbnew/board.cpp:1285 pcbnew/pcb_draw_panel_gal.cpp:529
msgid "Track Segments"
msgstr "Ledarsegment"
#: pcbnew/board.cpp:1286 pcbnew/pcb_draw_panel_gal.cpp:530
#: pcbnew/widgets/appearance_controls.cpp:1006
#: pcbnew/widgets/appearance_controls.cpp:2318
#: pcbnew/widgets/appearance_controls_base.cpp:61
#: pcbnew/widgets/appearance_controls_base.cpp:151
msgid "Nets"
msgstr "Nät"
#: pcbnew/board.cpp:1287 pcbnew/pcb_draw_panel_gal.cpp:531
msgid "Unrouted"
msgstr "Ej ledningsdragna"
#: pcbnew/board_item.cpp:113
msgid "all copper layers"
msgstr "alla kopparskikt"
#: pcbnew/board_item.cpp:127
msgid "and others"
msgstr "och andra"
#: pcbnew/board_item.cpp:135
msgid "no layers"
msgstr "inga lager"
#: pcbnew/board_item.cpp:280 pcbnew/pcb_track.cpp:1247 pcbnew/zone.cpp:1383
#: pcbnew/zone.cpp:1396
msgid "Position X"
msgstr "Position X"
#: pcbnew/board_item.cpp:283 pcbnew/pcb_track.cpp:1251 pcbnew/zone.cpp:1390
#: pcbnew/zone.cpp:1397
msgid "Position Y"
msgstr "Position Y"
#: pcbnew/board_item.cpp:288 pcbnew/dialogs/dialog_copper_zones_base.cpp:127
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:164
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:155
#: pcbnew/dialogs/dialog_group_properties_base.cpp:40
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:52
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:58
#: pcbnew/dialogs/dialog_text_properties_base.cpp:84
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:73
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:46
#: pcbnew/footprint.cpp:1044 pcbnew/fp_text.cpp:297 pcbnew/fp_textbox.cpp:309
#: pcbnew/pad.cpp:970 pcbnew/pcb_dimension.cpp:363 pcbnew/pcb_group.cpp:403
#: pcbnew/pcb_marker.cpp:363 pcbnew/pcb_shape.cpp:307 pcbnew/pcb_text.cpp:134
#: pcbnew/pcb_textbox.cpp:303 pcbnew/pcb_track.cpp:953 pcbnew/zone.cpp:569
msgid "Locked"
msgstr "Låst"
#: pcbnew/board_stackup_manager/board_stackup.cpp:303
#, c-format
msgid "Dielectric %d"
msgstr "Dielektrisk %d"
#: pcbnew/board_stackup_manager/board_stackup.cpp:534
msgid "Top Silk Screen"
msgstr "Övre anvisningstryck"
#: pcbnew/board_stackup_manager/board_stackup.cpp:542
msgid "Top Solder Paste"
msgstr "Lodpasta ovansida"
#: pcbnew/board_stackup_manager/board_stackup.cpp:550
msgid "Top Solder Mask"
msgstr "Ovansidans lödmask"
#: pcbnew/board_stackup_manager/board_stackup.cpp:594
msgid "Bottom Solder Mask"
msgstr "Undersidans lödmask"
#: pcbnew/board_stackup_manager/board_stackup.cpp:602
msgid "Bottom Solder Paste"
msgstr "Baksidans lodpasta"
#: pcbnew/board_stackup_manager/board_stackup.cpp:610
msgid "Bottom Silk Screen"
msgstr "Nedersta silkskärmen"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:45
msgid "Incorrect value for Epsilon R"
msgstr "Felaktigt värde för Epsilon R"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:51
msgid "Incorrect value for Loss Tangent"
msgstr "Felaktigt värde för förlusttangent"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:93
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:84
#: pcbnew/tools/drawing_stackup_table_tool.cpp:253
msgid "Material"
msgstr "Material"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:94
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:105
#: pcbnew/tools/drawing_stackup_table_tool.cpp:273
msgid "Epsilon R"
msgstr "Epsilon R"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:95
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:111
msgid "Loss Tan"
msgstr "Förlust Tan"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:35
msgid "Epsilon R:"
msgstr "Epsilon R:"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:39
msgid "Loss Tan:"
msgstr "Förlusttangent:"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:60
msgid "Common materials:"
msgstr "Gemensamma material:"
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.h:57
msgid "Dielectric Material Characteristics"
msgstr "Materialegenskaper för dielektrikum"
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:20
msgid "Has castellated pads"
msgstr "Har krenelerade lödytor"
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:23
msgid "Plated board edge"
msgstr "Pläterad mönsterkortskant"
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:31
msgid "Copper finish:"
msgstr "Oxidskydd på koppar:"
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:40
msgid "Edge card connectors:"
msgstr "Kortkantskontakter:"
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44
msgid "Yes, bevelled"
msgstr "Ja, fasad"
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:48
msgid "Options for edge card connectors."
msgstr "Alternativ för kantkortanslutningar."
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:116
msgid "Core"
msgstr "Laminatbas"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:117
msgid "PrePreg"
msgstr "Bindark"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:177
#, c-format
msgid "Enter board thickness in %s:"
msgstr "Ange korttjocklek i %s:"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:182
#, c-format
msgid "Enter expected board thickness (min value %s):"
msgstr "Ange förväntad korttjocklek (minst %s):"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:186
msgid "Adjust Unlocked Dielectric Layers"
msgstr "Justera olåsta dielektriska lager"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:195
#, c-format
msgid "Value too small (min value %s)."
msgstr "För litet värde (minimum %s)."
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:208
msgid "All dielectric thickness layers are locked"
msgstr "Alla dielektriska lagers tjocklek är låsta"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:275
#, c-format
msgid "Layer '%s' (sublayer %d/%d)"
msgstr "Lager '%s' (underlager %d/%d)"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:290
msgid "Add Dielectric Layer"
msgstr "Lägg till dielektriskt lager"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:292
#: pcbnew/dialogs/panel_setup_layers.cpp:839
msgid "Select layer to add:"
msgstr "Välj lager att lägga till:"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:337
#, c-format
msgid "Layer '%s' sublayer %d/%d"
msgstr "Lager '%s' underlager %d/%d"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:347
msgid "Remove Dielectric Layer"
msgstr "Ta bort Dielectric Layer"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:349
msgid "Select layer to remove:"
msgstr "Välj lager att ta bort:"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1128
msgid ""
"Incorrect value for Epsilon R (Epsilon R must be positive or null if not "
"used)"
msgstr ""
"Felaktigt värde för Epsilon R (Epsilon R måste vara positivt eller null om "
"det inte används)"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1149
msgid ""
"Incorrect value for Loss tg (Loss tg must be positive or null if not used)"
msgstr ""
"Felaktigt värde för förlust tg (förlust tg måste vara positivt eller noll om "
"det inte används)"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1195
msgid "A layer thickness is < 0. Fix it"
msgstr "Skikttjockleken är <0. Fixa det"
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1641
msgid "Custom..."
msgstr "Anpassad..."
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:20
#: pcbnew/dialogs/dialog_export_svg_base.cpp:50
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:487
msgid "Copper layers:"
msgstr "Kopparlager:"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:22
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:30
msgid "Select the number of copper layers in the stackup"
msgstr "Välj antalet kopparlager i lageruppbyggnaden"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:55
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:115
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:176
msgid "8"
msgstr "8"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "10"
msgstr "10"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "12"
msgstr "12"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "14"
msgstr "14"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "16"
msgstr "16"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "18"
msgstr "18"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "20"
msgstr "20"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "22"
msgstr "22"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "24"
msgstr "24"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "26"
msgstr "26"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "28"
msgstr "28"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "30"
msgstr "30"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:26
msgid "32"
msgstr "32"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:37
msgid "Impedance controlled"
msgstr "Impedansanpassat"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:38
msgid ""
"If Impedance Controlled option is set,\n"
"Loss tangent and EpsilonR will be added to constraints."
msgstr ""
"Om alternativ impedansanpassat är valt, kommer\n"
"förlusttangent och EpsilonR kommer att läggas till begränsningarna."
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:45
msgid "Add Dielectric Layer..."
msgstr "Lägg till dielektriskt lager..."
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:48
msgid "Remove Dielectric Layer..."
msgstr "Ta bort dielektriskt lager..."
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:72
#: pcbnew/build_BOM_from_board.cpp:108
msgid "Id"
msgstr "ID"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:132
msgid "Board thickness from stackup:"
msgstr "Mönsterkortstjocklek från lageruppbyggnad:"
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:139
msgid "Adjust Dielectric Thickness"
msgstr "Justera tjocklek på dielektrikum"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:38
msgid "ENIG"
msgstr "ENIG"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:39
msgid "ENEPIG"
msgstr "ENEPIG"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:40
msgid "HAL SnPb"
msgstr "HAL SnPb (varmluftsförtenning tenn/bly)"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:41
msgid "HAL lead-free"
msgstr "HAL blyfritt"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:42
msgid "Hard gold"
msgstr "Hårt guld"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:43
msgid "Immersion tin"
msgstr "Kemiskt tenn"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:44
msgid "Immersion nickel"
msgstr "Kemiskt nickel"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:45
msgid "Immersion silver"
msgstr "Kemiskt silver"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:46
msgid "Immersion gold"
msgstr "Kemiskt guld"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:47
msgid "HT_OSP"
msgstr "HT_OSP"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:48
msgid "OSP"
msgstr "OSP"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:50
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:69
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:83
msgid "User defined"
msgstr "Användardefinierad"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:62
msgid "Green"
msgstr "Grön"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:63
msgid "Red"
msgstr "Röd"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:64
msgid "Blue"
msgstr "Blå"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:65
msgid "Purple"
msgstr "Lila"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:66
msgid "Black"
msgstr "Svart"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:67
msgid "White"
msgstr "Vit"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:68
msgid "Yellow"
msgstr "Gul"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:78
msgid "FR4 natural"
msgstr "FR4 naturlig"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:79
msgid "PTFE natural"
msgstr "PTFE naturlig"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:80
msgid "Polyimide"
msgstr "Polyimid"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:81
msgid "Phenolic natural"
msgstr "Fenolpapp naturlig"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:82
msgid "Aluminum"
msgstr "Aluminum"
#: pcbnew/board_stackup_manager/stackup_predefined_prms.h:53
#: pcbnew/exporters/exporter_vrml.cpp:276
#: pcbnew/exporters/exporter_vrml.cpp:285
msgid "Not specified"
msgstr "Inte angiven"
#: pcbnew/build_BOM_from_board.cpp:79
msgid "Cannot export BOM: there are no footprints on the PCB."
msgstr ""
"Det går inte att exportera komponentlista: det finns inga fotavtryck på "
"mönsterkortet."
#: pcbnew/build_BOM_from_board.cpp:89
msgid "Save Bill of Materials"
msgstr "Spara materiallista"
#: pcbnew/build_BOM_from_board.cpp:109
msgid "Designator"
msgstr "Beteckning"
#: pcbnew/build_BOM_from_board.cpp:111
msgid "Quantity"
msgstr "Kvantitet"
#: pcbnew/build_BOM_from_board.cpp:112
msgid "Designation"
msgstr "Beteckning"
#: pcbnew/build_BOM_from_board.cpp:113
msgid "Supplier and ref"
msgstr "Leverantör och ref"
#: pcbnew/cleanup_item.cpp:46
msgid "Remove track shorting two nets"
msgstr "Ta bort ledare som kortsluter två nät"
#: pcbnew/cleanup_item.cpp:47
msgid "Remove via shorting two nets"
msgstr "Ta bort dem genom att kortsluta två nät"
#: pcbnew/cleanup_item.cpp:48
msgid "Remove redundant via"
msgstr "Ta bort överflödig via"
#: pcbnew/cleanup_item.cpp:49
msgid "Remove duplicate track"
msgstr "Ta bort dubbla ledare"
#: pcbnew/cleanup_item.cpp:50
msgid "Merge co-linear tracks"
msgstr "Slå samman kolinjära ledare"
#: pcbnew/cleanup_item.cpp:51
msgid "Remove track not connected at both ends"
msgstr "Ta bort ledare som inte är ansluten i någondera ändan"
#: pcbnew/cleanup_item.cpp:52
msgid "Remove via connected on less than 2 layers"
msgstr "Ta bort via ansluten på färre än två lager"
#: pcbnew/cleanup_item.cpp:53
msgid "Remove zero-length track"
msgstr "Ta bort ledare med längd noll"
#: pcbnew/cleanup_item.cpp:54
msgid "Remove track inside pad"
msgstr "Ta bort ledare inuti lödytan"
#: pcbnew/cleanup_item.cpp:57
msgid "Remove zero-size graphic"
msgstr "Ta bort grafik i nollstorlek"
#: pcbnew/cleanup_item.cpp:58
msgid "Remove duplicated graphic"
msgstr "Ta bort duplicerad grafik"
#: pcbnew/cleanup_item.cpp:59
msgid "Convert lines to rectangle"
msgstr "Konvertera rader till rektangel"
#: pcbnew/cleanup_item.cpp:60
msgid "Merge overlapping shapes into pad"
msgstr "Slå samman överlappande former till en lödyta"
#: pcbnew/cleanup_item.cpp:64
msgid "Unknown cleanup action"
msgstr "Okänd saneringsåtgärd"
#: pcbnew/connectivity/connectivity_data.cpp:106
msgid "Updating nets..."
msgstr "Uppdaterar nät..."
#: pcbnew/convert_shape_list_to_polygon.cpp:317
#: pcbnew/convert_shape_list_to_polygon.cpp:455
#: pcbnew/convert_shape_list_to_polygon.cpp:571
#: pcbnew/convert_shape_list_to_polygon.cpp:585
msgid "(self-intersecting)"
msgstr "(självkorsande)"
#: pcbnew/convert_shape_list_to_polygon.cpp:462
msgid "(not a closed shape)"
msgstr "(inte en sluten form)"
#: pcbnew/convert_shape_list_to_polygon.cpp:517
msgid "(multiple board outlines not supported)"
msgstr "(fler än ett mönsterkort stöds inte)"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:86
msgid "Only front"
msgstr "Endast fram"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:87
msgid "Only back"
msgstr "Bara tillbaka"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:88
msgid "Only selected"
msgstr "Endast vald"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:94
msgid "Empty"
msgstr "Töm"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:95
msgid "Invalid"
msgstr "Ogiltigt"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:96
msgid "Excluded"
msgstr "Utesluten"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:111
msgid "Reannotate PCB"
msgstr "Numrera om mönsterkortet"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:278
msgid "No PCB to reannotate!"
msgstr "Det finns inget mönsterkort att numrera om!"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:290
msgid "PCB successfully reannotated"
msgstr ""
"Mönsterkortets referensbeteckningar har numrerats om med lyckat resultat"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:291
msgid ""
"PCB annotation changes should be synchronized with schematic using the "
"\"Update Schematic from PCB\" tool."
msgstr ""
"Förändringar i mönsterkortets annotering ska synkroniseras med schemat genom "
"\"Uppdatera schema från mönsterkort\"-verktyget."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:304
#, c-format
msgid ""
"\n"
"%s footprints will be reannotated."
msgstr ""
"\n"
"%s fotavtryck kommer att numreras om."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:309
#, c-format
msgid ""
"\n"
"Any reference types %s will not be annotated."
msgstr ""
"\n"
"Referenser av typ %s kommer inte att numreras om."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:314
msgid ""
"\n"
"Locked footprints will not be annotated"
msgstr ""
"\n"
"Låsta fotavtryck kommer inte att numreras"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:318
#, c-format
msgid ""
"\n"
"Front footprints will start at %s"
msgstr ""
"\n"
"Främre fotavtryck börjar vid %s"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:327
#, c-format
msgid ""
"\n"
"Back footprints will start at %s."
msgstr ""
"\n"
"Fotavtryck på baksidan börjar vid %s."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:328
msgid "the last front footprint + 1"
msgstr "det sista främre fotavtrycket + 1"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:336
#, c-format
msgid ""
"\n"
"Front footprints starting with '%s' will have the prefix removed."
msgstr ""
"\n"
"För framsidans fotavtryck som börjar med '%s' tas prefixet bort."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:342
#, c-format
msgid ""
"\n"
"Front footprints will have '%s' inserted as a prefix."
msgstr ""
"\n"
"Främre fotavtryck har \"%s\" infogats som ett prefix."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:352
#, c-format
msgid ""
"\n"
"Back footprints starting with '%s' will have the prefix removed."
msgstr ""
"\n"
"Baksidans fotavtryck som börjar med '%s' kommer att få prefixet borttaget."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:358
#, c-format
msgid ""
"\n"
"Back footprints will have '%s' inserted as a prefix."
msgstr ""
"\n"
"Baksidans fotavtryck kommer att få \"%s\" tillagt som ett prefix."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:366
#, c-format
msgid ""
"\n"
"Prior to sorting by %s, the coordinates of which will be rounded to a %s, %s "
"grid."
msgstr ""
"\n"
"Innan vi sorterar efter %s, vars koordinater kommer att avrundas till ett "
"%s, %s rutnät."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:368
msgid "footprint location"
msgstr "plats för fotavtryck"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:369
msgid "reference designator location"
msgstr "referensbeteckningens plats"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:509
#, c-format
msgid ""
"\n"
"\n"
"There are %i types of reference designations\n"
"**********************************************************\n"
msgstr ""
"\n"
"\n"
"Det finns %i typer av referensbeteckningar\n"
"************************************************* ********\n"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:523
#, c-format
msgid ""
"\n"
"Excluding: %s from reannotation\n"
"\n"
msgstr ""
"\n"
"Exklusive: %s från reannotation\n"
"\n"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:526
msgid ""
"\n"
" Change Array\n"
"***********************\n"
msgstr ""
"\n"
" Byt Array\n"
"***********************\n"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:534
msgid " will be ignored"
msgstr " kommer att ignoreras"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:548
msgid ""
"\n"
"No footprints"
msgstr ""
"\n"
"Inga fotavtryck"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:554
#, c-format
msgid ""
"\n"
"*********** Sort on %s ***********"
msgstr ""
"\n"
"*********** Sortera på %s ***********"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:555
msgid "Footprint Coordinates"
msgstr "Fotavtryck koordinater"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:556
msgid "Reference Designator Coordinates"
msgstr "Referensbeteckningskoordinater"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:558
#, c-format
msgid ""
"\n"
"Sort Code %d"
msgstr ""
"\n"
"Sorteringskod %d"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:562
#, c-format
msgid ""
"\n"
"%d %s UUID: [%s], X, Y: %s, Rounded X, Y, %s"
msgstr ""
"\n"
"%d %s UUID: [%s], X, Y: %s, Rundad X, Y, %s"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:585
msgid "Selected options resulted in errors! Change them and try again."
msgstr "Valda alternativ orsakar fel! Ändra alternativ och försök igen."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:592
#, c-format
msgid ""
"\n"
"PCB has %d empty or invalid reference designations.\n"
"Recommend running DRC with 'Test for parity between PCB and schematic' "
"checked.\n"
msgstr ""
"\n"
"PCB har %d tomma eller ogiltiga referensbeteckningar.\n"
"Rekommenderar körning av DRC med 'Testa paritet mellan mönsterkort och "
"schema' ikryssad.\n"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:599
#, c-format
msgid ""
"\n"
"RefDes: %s Footprint: %s:%s at %s on PCB."
msgstr ""
"\n"
"RefDes: %s Fotavtryck: %s: %s vid %s på PCB."
#: pcbnew/dialogs/dialog_board_reannotate.cpp:607
msgid "Reannotate anyway?"
msgstr "Gör om numreringen ändå?"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:789
#, c-format
msgid "Duplicate instances of %s"
msgstr "Flera förekomster av objekt %s"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:795
msgid "Aborted: too many errors"
msgstr "Avbruten: för många fel"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:849
msgid ""
"\n"
"\n"
"Front Footprints"
msgstr ""
"\n"
"\n"
"Främre Fotavtryck"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:850
msgid ""
"\n"
"\n"
"Back Footprints"
msgstr ""
"\n"
"\n"
"Baksidans fotavtryck"
#: pcbnew/dialogs/dialog_board_reannotate.cpp:915
msgid "Footprint not found in changelist"
msgstr "Fotavtryck hittades inte i ändringslistan"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:30
msgid "Footprint Order"
msgstr "Fotavtrycksordning"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:45
msgid "Horizontally: top left to bottom right"
msgstr "Horisontellt: uppe till vänster till nedre högra"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:56
msgid "Horizontally: top right to bottom left"
msgstr "Horisontellt: uppe till höger till nedre vänster"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:67
msgid "Horizontally: bottom left to top right"
msgstr "Horisontellt: nedre vänster till övre högra"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:78
msgid "Horizontally:: bottom right to top left"
msgstr "Horisontellt :: nere till höger till övre vänster"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:86
msgid "Vertically: top left to bottom right"
msgstr "Vertikalt: uppe till vänster till nedre högra"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:97
msgid "Vertically: top right to bottom left"
msgstr "Vertikalt: uppe till höger till nedre vänster"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:108
msgid "Vertically: bottom left to top right"
msgstr "Vertikalt: nedre vänster till övre högra"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:119
msgid "Vertically: bottom right to top left"
msgstr "Vertikalt: längst ner till höger till vänster"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:132
msgid "Based on location of:"
msgstr "Baserat på plats för:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:136
msgid "Reference Designator"
msgstr "Referensbeteckning"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:142
msgid "Round locations to:"
msgstr "Avrunda positioner till:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:144
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:151
msgid ""
"Component position will be rounded\n"
"to this grid before sorting.\n"
"This helps with misaligned parts."
msgstr ""
"Komponentpositionen kommer att avrundas\n"
"till detta rutnät innan du sorterar.\n"
"Detta hjälper till med feljusterade delar."
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:163
msgid "Reannotation Scope"
msgstr "Omnumreringens omfattning"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:170
msgid "Reannotate:"
msgstr "Numrera om:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:178
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:155
#: pcbnew/footprint.cpp:1029
msgid "Front"
msgstr "Framsida"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:181
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:155
#: pcbnew/dialogs/panel_setup_layers_base.cpp:560
msgid "Back"
msgstr "Baksida"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:208
msgid "Front reference start:"
msgstr "Start för framsidans numrering:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:210
msgid "Starting reference designation for front."
msgstr ""
"Ny numrering av referensbeteckningar på framsidan startar från detta nummer."
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:214
#: pcbnew/dialogs/dialog_create_array_base.cpp:96
#: pcbnew/dialogs/dialog_create_array_base.cpp:169
#: pcbnew/dialogs/dialog_create_array_base.cpp:174
#: pcbnew/dialogs/dialog_create_array_base.cpp:183
#: pcbnew/dialogs/dialog_create_array_base.cpp:188
#: pcbnew/dialogs/dialog_create_array_base.cpp:318
#: pcbnew/dialogs/dialog_create_array_base.cpp:325
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1374
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:48
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:108
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:169
msgid "1"
msgstr "1"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:215
msgid "Default is 1"
msgstr "Standard är 1"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:220
msgid "Back reference start:"
msgstr "Start för baksidans numrering:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:222
msgid ""
"Blank continues from front or enter a number greater than the highest "
"reference designation on the front."
msgstr ""
"Blank fortsätter från framsidan eller ange ett nummer som är större än den "
"högsta referensbeteckningen på framsidan."
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:227
msgid ""
"Leave blank or zero, or enter a number greater than the highest reference "
"designation on the front."
msgstr ""
"Lämna tom eller noll, eller ange ett nummer som är större än den högsta "
"referensbeteckningen på framsidan."
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:232
msgid "Remove front prefix"
msgstr "Ta bort framsidans prefix"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:233
msgid ""
"If checked will remove the front side prefix\n"
"in the front prefix box if present"
msgstr ""
"Om markerat, kommer det prefix som är angivet i rutan för framsidans prefix\n"
"att tas bort från referensbeteckningarna, om det finns sedan tidigare"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:237
msgid "Remove back prefix"
msgstr "Ta bort baksidans prefix"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:238
msgid ""
"If checked will remove the Back side prefix\n"
"in the back prefix box if present"
msgstr ""
"Om markerat, kommer det prefix som är angivet i rutan för baksidans prefix\n"
"att tas bort från referensbeteckningarna, om det finns sedan tidigare"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:242
msgid "Front prefix:"
msgstr "Framsidans prefix:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:244
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:249
msgid "Optional prefix for component side reference designations (e.g. F_)"
msgstr "Valfritt prefix för komponentsidans referensbeteckningar (t.ex. F_)"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:253
msgid "Back prefix:"
msgstr "Baksidans prefix:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:255
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:260
msgid "Optional prefix for solder side reference designations (e.g. B_)"
msgstr "Valfritt prefix för lödsidans referensbeteckningar (t.ex. B_)"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:264
msgid "Exclude locked footprints"
msgstr "Uteslut låsta fotavtryck"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:265
msgid "Locked footprints will not be reannotated"
msgstr "Låsta fotavtryck kommer inte att omnumreras"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:269
msgid "Exclude references:"
msgstr "Uteslut referenser:"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:271
msgid ""
"Do not re-annotate this type \n"
"of reference (R means R*)"
msgstr ""
"Numrera inte om referenser av\n"
"den här typen (R betyder R*)"
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:290
msgid "Reference Designators"
msgstr "Referensbeteckningar"
#: pcbnew/dialogs/dialog_board_reannotate_base.h:106
msgid "Geographical Reannotation"
msgstr "Geografisk komponentnumrering"
#: pcbnew/dialogs/dialog_board_setup.cpp:52
msgid "Board Setup"
msgstr "Mönsterkortsinställningar"
#: pcbnew/dialogs/dialog_board_setup.cpp:53
msgid "Import Settings from Another Board..."
msgstr "Importera inställningar från ett annat kort ..."
#: pcbnew/dialogs/dialog_board_setup.cpp:83
msgid "Board Stackup"
msgstr "Mönsterkortets lageruppbyggnad"
#: pcbnew/dialogs/dialog_board_setup.cpp:93
msgid "Board Editor Layers"
msgstr "Lager i mönsterkortsredigeraren"
#: pcbnew/dialogs/dialog_board_setup.cpp:96
msgid "Physical Stackup"
msgstr "Fysisk lageruppbyggnad"
#: pcbnew/dialogs/dialog_board_setup.cpp:101
msgid "Board Finish"
msgstr "Mönsterkortets ytfinish"
#: pcbnew/dialogs/dialog_board_setup.cpp:102
#: pcbnew/dialogs/dialog_plot.cpp:1168
msgid "Solder Mask/Paste"
msgstr "Lödmask / lodpasta"
#: pcbnew/dialogs/dialog_board_setup.cpp:104
msgid "Text & Graphics"
msgstr "Text & Grafik"
#: pcbnew/dialogs/dialog_board_setup.cpp:105
msgid "Defaults"
msgstr "Standardvärden"
#: pcbnew/dialogs/dialog_board_setup.cpp:109
msgid "Design Rules"
msgstr "Designregler"
#: pcbnew/dialogs/dialog_board_setup.cpp:110
msgid "Constraints"
msgstr "Begränsningar"
#: pcbnew/dialogs/dialog_board_setup.cpp:111 pcbnew/edit_track_width.cpp:189
#: pcbnew/edit_track_width.cpp:213
msgid "Pre-defined Sizes"
msgstr "Fördefinierade storlekar"
#: pcbnew/dialogs/dialog_board_setup.cpp:113
#: pcbnew/dialogs/dialog_constraints_reporter.cpp:54
#: pcbnew/dialogs/dialog_drc.cpp:230 pcbnew/pcb_edit_frame.cpp:2032
msgid "Custom Rules"
msgstr "Anpassade regler"
#: pcbnew/dialogs/dialog_board_setup.cpp:126
msgid "Project is missing or read-only. Some settings will not be editable."
msgstr ""
"Projektet saknas eller är skrivskyddat. Vissa inställningar kommer inte "
"kunna ändras."
#: pcbnew/dialogs/dialog_board_setup.cpp:174
#, c-format
msgid ""
"Error importing settings from board:\n"
"Associated project file %s could not be loaded"
msgstr ""
"Fel vid import av inställningar från kort:\n"
"Associerad projektfil %s kunde inte laddas"
#: pcbnew/dialogs/dialog_board_setup.cpp:194 pcbnew/files.cpp:639
#: pcbnew/tools/pcb_control.cpp:1265
msgid "Loading PCB"
msgstr "Laddar mönsterkort"
#: pcbnew/dialogs/dialog_board_setup.cpp:216
#, c-format
msgid ""
"Error loading board file:\n"
"%s"
msgstr ""
"Fel vid inläsning av kortfil:\n"
"%s"
#: pcbnew/dialogs/dialog_board_statistics.cpp:96
#: pcbnew/dialogs/dialog_board_statistics.cpp:701
msgid "Front Side"
msgstr "Framsida"
#: pcbnew/dialogs/dialog_board_statistics.cpp:98
#: pcbnew/dialogs/dialog_board_statistics.cpp:701
msgid "Back Side"
msgstr "Baksidan"
#: pcbnew/dialogs/dialog_board_statistics.cpp:100
#: pcbnew/dialogs/dialog_board_statistics.cpp:701
msgid "Total"
msgstr "Totalt"
#: pcbnew/dialogs/dialog_board_statistics.cpp:145
msgid "THT:"
msgstr "THT:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:146
#: pcbnew/dialogs/dialog_board_statistics.cpp:151
msgid "SMD:"
msgstr "SMD:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:147
msgid "Unspecified:"
msgstr "Ospecificerad:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:150
msgid "Through hole:"
msgstr "Hålmonteringshål:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:152
msgid "Connector:"
msgstr "Förbindelser:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:153
msgid "NPTH:"
msgstr "NPTH:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:156
#: pcbnew/dialogs/dialog_gendrill_base.cpp:167
msgid "Through vias:"
msgstr "Genomgående vior:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:157
msgid "Blind/buried:"
msgstr "Blinda / begravda:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:158
#: pcbnew/dialogs/dialog_gendrill_base.cpp:175
msgid "Micro vias:"
msgstr "Mikrovior:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:396
#: pcbnew/dialogs/dialog_board_statistics.cpp:410
#: pcbnew/dialogs/dialog_board_statistics.cpp:431
msgid "Total:"
msgstr "Totalt:"
#: pcbnew/dialogs/dialog_board_statistics.cpp:448
#: pcbnew/dialogs/dialog_board_statistics.cpp:449
#: pcbnew/dialogs/dialog_board_statistics.cpp:450
#: pcbnew/dialogs/dialog_board_statistics.cpp:681
#: pcbnew/dialogs/dialog_board_statistics.cpp:682
#: pcbnew/dialogs/dialog_board_statistics.cpp:683
msgid "unknown"
msgstr "okänd"
#: pcbnew/dialogs/dialog_board_statistics.cpp:477
msgid "Round"
msgstr "Rund"
#: pcbnew/dialogs/dialog_board_statistics.cpp:478
msgid "Slot"
msgstr "Urfräsning"
#: pcbnew/dialogs/dialog_board_statistics.cpp:479
msgid "???"
msgstr "???"
#: pcbnew/dialogs/dialog_board_statistics.cpp:483
#: pcbnew/dialogs/dialog_board_statistics.cpp:488
msgid "N/A"
msgstr "N/A"
#: pcbnew/dialogs/dialog_board_statistics.cpp:499 pcbnew/pad.cpp:1220
msgid "PTH"
msgstr "PTH"
#: pcbnew/dialogs/dialog_board_statistics.cpp:499 pcbnew/pad.cpp:1223
msgid "NPTH"
msgstr "NPTH"
#: pcbnew/dialogs/dialog_board_statistics.cpp:642
msgid "Save Report File"
msgstr "Spara rapportfil"
#: pcbnew/dialogs/dialog_board_statistics.cpp:661
msgid ""
"PCB statistics report\n"
"====================="
msgstr ""
"PCB-statistikrapport\n"
"======================"
#: pcbnew/dialogs/dialog_board_statistics.cpp:662
msgid "Date"
msgstr "Datum"
#: pcbnew/dialogs/dialog_board_statistics.cpp:664
msgid "Board name"
msgstr "Kortnamn"
#: pcbnew/dialogs/dialog_board_statistics.cpp:667
msgid "Board"
msgstr "Anslagstavla"
#: pcbnew/dialogs/dialog_board_statistics.cpp:675
#: pcbnew/dialogs/dialog_board_statistics.cpp:683
msgid "Area"
msgstr "Ytdiagram"
#: pcbnew/dialogs/dialog_board_statistics.cpp:730
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:39
msgid "Components"
msgstr "Komponenter"
#: pcbnew/dialogs/dialog_board_statistics.cpp:736
msgid "Drill holes"
msgstr "Borrhål"
#: pcbnew/dialogs/dialog_board_statistics.cpp:743
#, c-format
msgid "Error writing file '%s'."
msgstr "Fel under skrivning av fil '%s'."
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:119
msgid "Board Size"
msgstr "Mönsterkortets storlek"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:200
msgid "Subtract holes from board area"
msgstr "Subtrahera hål från mönsterkortsarea"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:203
msgid "Exclude footprints with no pads"
msgstr "Uteslut fotavtryck utan lödytor"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:233
msgid "X Size"
msgstr "X Storlek"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:234
msgid "Y Size"
msgstr "Y Storlek"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:235
msgid "Plated"
msgstr "Pläterad"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:236
msgid "Via/Pad"
msgstr "Via / Pad"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:237
msgid "Start Layer"
msgstr "Starta lager"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:238
msgid "Stop Layer"
msgstr "Stoppa lager"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:258
msgid "Drill Holes"
msgstr "Borrhål"
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:265
#: pcbnew/dialogs/dialog_gendrill_base.cpp:216
msgid "Generate Report File..."
msgstr "Skapa rapportfil ..."
#: pcbnew/dialogs/dialog_board_statistics_base.h:68
msgid "Board Statistics"
msgstr "Kortstatistik"
#: pcbnew/dialogs/dialog_choose_footprint.cpp:230
msgid "No footprint selected"
msgstr "Inget fotavtryck har valts"
#: pcbnew/dialogs/dialog_cleanup_graphics.cpp:45
msgid "Update Footprint"
msgstr "Uppdatera fotavtryck"
#: pcbnew/dialogs/dialog_cleanup_graphics.cpp:50
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:80
#: pcbnew/dialogs/dialog_import_netlist.cpp:83
#: pcbnew/dialogs/dialog_update_pcb.cpp:59
msgid "Update PCB"
msgstr "Uppdatera PCB"
#: pcbnew/dialogs/dialog_cleanup_graphics.cpp:124
msgid "Graphics cleanup"
msgstr "Rengöring av grafik"
#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:22
msgid "Merge lines into rectangles"
msgstr "Slå samman linjer till rektanglar"
#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:25
msgid "Delete redundant graphics"
msgstr "Ta bort överflödig grafik"
#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:28
msgid "Merge overlapping graphics into pads"
msgstr "Slå samman överlappande grafik till lödytor"
#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:34
msgid ""
"(Pads which appear in a Net Tie pad group will not be considered for "
"merging.)"
msgstr ""
"(Lödytor som är med i en nätbryggegrupp kommer inte att beaktas vid "
"sammanslagning.)"
#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:48
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:72
msgid "Changes To Be Applied:"
msgstr "Ändringar att verkställa:"
#: pcbnew/dialogs/dialog_cleanup_graphics_base.h:55
msgid "Cleanup Graphics"
msgstr "Städa upp grafik"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:78
#, fuzzy
msgid "Build Changes"
msgstr "Bygg ändringar"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:130
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:172
msgid "Checking zones..."
msgstr "Kontrollerar zoner..."
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:138
msgid "Rebuilding connectivity..."
msgstr "Återskapar anslutningar..."
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:158
msgid "Board cleanup"
msgstr "Städa mönsterkortet"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:25
msgid "Delete &tracks connecting different nets"
msgstr "Ta bort &ledare som ansluter olika nät"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:26
msgid ""
"remove track segments connecting nodes belonging to different nets (short "
"circuit)"
msgstr ""
"ta bort ledarsegment som ansluter noder tillhörande olika nät (kortslutning)"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:30
msgid "&Delete redundant vias"
msgstr "&Ta bort redundanta vior"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:31
msgid "remove vias on through hole pads and superimposed vias"
msgstr "ta bort vior på hålmonteringslödytor och överlagrade vior"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:35
msgid "Delete vias connected on only one layer"
msgstr "Ta bort vior anslutna på endast ett lager"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:38
msgid "&Merge co-linear tracks"
msgstr "Slå sa&mman kolinjära ledare"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:39
msgid "merge aligned track segments, and remove null segments"
msgstr "slå ihop ledarsegment med samma riktning och ta bort nollsegment"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:43
msgid "Delete tracks unconnected at one end"
msgstr "Ta bort ledare som inte är anslutna i ena änden"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:44
msgid "delete tracks having at least one dangling end"
msgstr "ta bort ledare som har minst en dinglande ände"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:48
msgid "Delete tracks fully inside pads"
msgstr "Ta bort ledare inneslutna i lödytor"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:49
msgid "Delete tracks that have both start and end positions inside of a pad"
msgstr "Ta bort ledare som har både start- och slutposition inuti en lödyta"
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.h:60
msgid "Cleanup Tracks and Vias"
msgstr "Städa upp ledare och vior"
#: pcbnew/dialogs/dialog_constraints_reporter_base.h:45
msgid "Constraints Resolution Report"
msgstr "Rapporter om begränsningar"
#: pcbnew/dialogs/dialog_copper_zones.cpp:209
msgid "Teardrop on Vias/Pads Properties"
msgstr "Egenskaper för kragförstärkningar på vior/lödytor"
#: pcbnew/dialogs/dialog_copper_zones.cpp:213
msgid "Teardrop on Tracks Properties"
msgstr "Egenskaper för kragförstärkningar på ledare"
#: pcbnew/dialogs/dialog_copper_zones.cpp:217
msgid "Teardrop Properties"
msgstr "Egenskaper för kragförstärkningar"
#: pcbnew/dialogs/dialog_copper_zones.cpp:223
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:105
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:95
#: pcbnew/tools/convert_tool.cpp:59
msgid "Conversion Settings"
msgstr "Inställningar för konvertering"
#: pcbnew/dialogs/dialog_copper_zones.cpp:226
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:108
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:98
#: pcbnew/tools/convert_tool.cpp:71
msgid "Use centerlines"
msgstr "Använd centrumlinjer"
#: pcbnew/dialogs/dialog_copper_zones.cpp:230
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:112
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:102
#: pcbnew/tools/convert_tool.cpp:75
msgid "Create bounding hull"
msgstr "Skapa begränsningskropp"
#: pcbnew/dialogs/dialog_copper_zones.cpp:234
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:116
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:106
#: pcbnew/tools/convert_tool.cpp:79
msgid "Delete source objects after conversion"
msgstr "Ta bort källobjekt efter konvertering"
#: pcbnew/dialogs/dialog_copper_zones.cpp:243
msgid "Convert to Copper Zone"
msgstr "Konvertera till kopparzon"
#: pcbnew/dialogs/dialog_copper_zones.cpp:426
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:164
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:147
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:97
msgid "Chamfer distance:"
msgstr "Fasavstånd:"
#: pcbnew/dialogs/dialog_copper_zones.cpp:428
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:149
msgid "Fillet radius:"
msgstr "Filéradie:"
#: pcbnew/dialogs/dialog_copper_zones.cpp:583
msgid "Thermal spoke width cannot be smaller than the minimum width."
msgstr ""
"Bredd på eker för termisk avlastning kan inte vara mindre än minsta bredd."
#: pcbnew/dialogs/dialog_copper_zones.cpp:607
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:323
msgid "No layer selected."
msgstr "Inget lager valt."
#: pcbnew/dialogs/dialog_copper_zones.cpp:891
msgid "<no net> will result in an isolated copper island."
msgstr "Väljs <inget nät> skapas en isolerad kopparö."
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:48
msgid ""
"Pattern to filter net names in filtered list.\n"
"Only net names matching this pattern are displayed."
msgstr ""
"Mönster för att filtrera nätnamn i filtrerad lista.\n"
"Endast nätnamn som matchar detta mönster visas."
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:55
msgid "Hide auto-generated net names"
msgstr "Göm automatiskt genererade nätnamn"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:62
msgid "Sort nets by pad count"
msgstr "Sortera nät efter antal pad"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:95
msgid "Zone name:"
msgstr "Zonnamn:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:97
msgid "A unique name for this zone to identify it for DRC"
msgstr "Ett unikt namn för den här zonen för att identifiera den för DRC"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:104
msgid "Zone priority level:"
msgstr "Zonprioritetsnivå:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:106
msgid ""
"Zones are filled by priority level, level 3 has higher priority than level "
"2.\n"
"When a zone is inside another zone:\n"
"* If its priority is higher, its outlines are removed from the other zone.\n"
"* If its priority is equal, a DRC error is set."
msgstr ""
"Zoner fylls med prioritetsnivå, nivå 3 har högre prioritet än nivå 2.\n"
"När en zon befinner sig i en annan zon:\n"
"* Om dess prioritet är högre tas dess konturer bort från den andra zonen.\n"
"* Om dess prioritet är lika, ställs ett DRC-fel in."
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:130
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:116
msgid "Outline display:"
msgstr "Konturvisning:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:134
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:59
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:120 pcbnew/zone.cpp:594
msgid "Hatched"
msgstr "Skrafferad kant"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:134
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:59
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:120
msgid "Fully hatched"
msgstr "Helt skrafferad"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:140
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:65
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:126
msgid "Outline hatch pitch:"
msgstr "Delningsmått för zongränsens skraffering:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:154
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:87
msgid "Corner smoothing:"
msgstr "Hörnutjämning:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:158
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:91
msgid "Chamfer"
msgstr "Avfasning"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:158
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:91
msgid "Fillet"
msgstr "Filea"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:190
msgid "Electrical Properties"
msgstr "Elektriska egenskaper"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:197
msgid "Clearance:"
msgstr "Avstånd:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:199
msgid "Copper clearance for this zone (set to 0 to use the netclass clearance)"
msgstr ""
"Koppar-avstånd för denna zon (sätt till 0 för att använda nätklassens "
"avstånd)"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:210
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:76
msgid "Minimum width:"
msgstr "Minsta bredd:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:212
msgid "Minimum thickness of filled areas."
msgstr "Minsta tjocklek på fyllda områden."
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:226
msgid "Pad connections:"
msgstr "Lödytans anslutningstyp:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:228
msgid ""
"Default pad connection type to zone.\n"
"This setting can be overridden by local pad settings"
msgstr ""
"Standard anslutningstyp mellan lödyta och kopparzon.\n"
"Denna inställning kan åsidosättas av lokala lödyte-inställningar"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:232 pcbnew/footprint.cpp:2834
#: pcbnew/pad.cpp:1720 pcbnew/zone.cpp:1364
msgid "Thermal reliefs"
msgstr "Termiska avlastningar"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:232
msgid "Reliefs for PTH"
msgstr "Avlastningar för PTH"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:238
msgid "Thermal relief gap:"
msgstr "Termiskt avlastningsgap:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:240
msgid ""
"The distance that will be kept clear between the filled area of the zone and "
"a pad connected by thermal relief spokes."
msgstr ""
"Avståndet som hålls fritt mellan zonens fyllda yta och en termiskt avlastad "
"lödyta ansluten med ekrar."
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:245
msgid "Clearance between pads in the same net and filled areas."
msgstr "Avstånd mellan lödytor i samma nät och fyllda områden."
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:253
msgid "Thermal spoke width:"
msgstr "Termisk ekers bredd:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:258
msgid "Width of copper in thermal reliefs."
msgstr "Kopparbredd i termiska avlastningar."
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:278
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:117
msgid "Fill"
msgstr "Fyll"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:286
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:125
msgid "Fill type:"
msgstr "Fyllningstyp:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:290
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:129
#: pcbnew/zone.cpp:1374
msgid "Solid fill"
msgstr "Solid fyllning"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:290
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:129
#: pcbnew/zone.cpp:1375
msgid "Hatch pattern"
msgstr "Rutnätsmönster"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:307
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:149
msgid "Hatch width:"
msgstr "Rutnäts linjebredd:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:318
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:160
msgid "Hatch gap:"
msgstr "Rutnäts gap:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:329
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:171
msgid "Smoothing effort:"
msgstr "Utjämningsgrad:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:331
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:173
msgid ""
"Value of smoothing effort\n"
"0 = no smoothing\n"
"1 = chamfer\n"
"2 = round corners\n"
"3 = round corners (finer shape)"
msgstr ""
"Värden för utjämningsgrad:\n"
"0 = ingen utjämning\n"
"1 = fasning\n"
"2 = rundade hörn (grov)\n"
"3 = rundade hörn (finare form)"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:338
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:183
msgid "Smoothing amount:"
msgstr "Utjämningsradie:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:340
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:185
msgid ""
"Ratio between smoothed corners size and the gap between lines\n"
"0 = no smoothing\n"
"1.0 = max radius/chamfer size (half gap value)"
msgstr ""
"Storleksförhållandet mellan hörnutjämningen och rutnätsöppningen:\n"
"0 = ingen utjämning\n"
"1,0 = max radie / fasstorlek (halva gapets värde)"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:351
msgid "Remove islands:"
msgstr "Ta bort öar:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:353
msgid "Choose what to do with unconnected copper islands"
msgstr "Välj vad du ska göra med icke kopplade kopparöar"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:357
msgid "Below area limit"
msgstr "Under areagränsen"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:363
msgid "Minimum island size:"
msgstr "Minsta östorlek:"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:366
msgid "Isolated islands smaller than this will be removed"
msgstr "Isolerade öar som är mindre än detta kommer att tas bort"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:395
msgid "Export Settings to Other Similar Zones"
msgstr "Exportera inställningar till andra liknande zoner"
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:396
msgid ""
"Export this zone setup (excluding layer and net selection) to other similar "
"copper zones (teardrops or usual copper zones)."
msgstr ""
"Exportera denna zoninställning (exklusive lager- och nätval) till andra "
"liknande kopparzoner (kragförstärkningar eller vanliga kopparzoner)."
#: pcbnew/dialogs/dialog_copper_zones_base.h:141
msgid "Copper Zone Properties"
msgstr "Egenskaper för kopparzon"
#: pcbnew/dialogs/dialog_create_array.cpp:133
msgid "Numerals (0,1,2,...,9,10)"
msgstr "Siffror (0,1,2, ..., 9,10)"
#: pcbnew/dialogs/dialog_create_array.cpp:137
msgid "Hexadecimal (0,1,...,F,10,...)"
msgstr "Hexadecimal (0,1, ..., F, 10, ...)"
#: pcbnew/dialogs/dialog_create_array.cpp:141
msgid "Alphabet, minus IOSQXZ"
msgstr "Alfabetet minus IOSQXZ"
#: pcbnew/dialogs/dialog_create_array.cpp:145
msgid "Alphabet, full 26 characters"
msgstr "Alfabetet, hela 26 tecken"
#: pcbnew/dialogs/dialog_create_array.cpp:269
#, c-format
msgid "Bad numeric value for %s: %s"
msgstr "Dåligt numeriskt värde för %s: %s"
#: pcbnew/dialogs/dialog_create_array.cpp:305
#, c-format
msgid ""
"Could not determine numbering start from '%s': expected value consistent "
"with alphabet '%s'."
msgstr ""
"Kunde inte bestämma numreringsstart från '%s': förväntat värde "
"överensstämmer med alfabetet '%s'."
#: pcbnew/dialogs/dialog_create_array.cpp:313
msgid "step value"
msgstr "stegvärde"
#: pcbnew/dialogs/dialog_create_array.cpp:335
msgid "horizontal count"
msgstr "horisontell räkning"
#: pcbnew/dialogs/dialog_create_array.cpp:336
msgid "vertical count"
msgstr "vertikal räkning"
#: pcbnew/dialogs/dialog_create_array.cpp:344
msgid "stagger"
msgstr "sprida"
#: pcbnew/dialogs/dialog_create_array.cpp:400
msgid "point count"
msgstr "poängräkning"
#: pcbnew/dialogs/dialog_create_array.cpp:445
msgid "Bad parameters"
msgstr "Felaktiga parametrar"
#: pcbnew/dialogs/dialog_create_array_base.cpp:34
msgid "Horizontal count:"
msgstr "Horisontellt antal:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:41
msgid "Vertical count:"
msgstr "Vertikal räkning:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:48
msgid "Horizontal spacing:"
msgstr "Horisontellt avstånd:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:59
msgid "Vertical spacing:"
msgstr "Vertikalt avstånd:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:70
msgid "Horizontal offset:"
msgstr "Horisontell förskjutning:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:81
msgid "Vertical offset:"
msgstr "Vertikal förskjutning:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:92
msgid "Stagger:"
msgstr "Sprida:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:99
msgid "Rows"
msgstr "Rader"
#: pcbnew/dialogs/dialog_create_array_base.cpp:99
msgid "Columns"
msgstr "Kolumner"
#: pcbnew/dialogs/dialog_create_array_base.cpp:101
msgid "Stagger Type"
msgstr "Vacklande typ"
#: pcbnew/dialogs/dialog_create_array_base.cpp:116
msgid "Horizontal, then vertical"
msgstr "Horisontellt, sedan vertikalt"
#: pcbnew/dialogs/dialog_create_array_base.cpp:116
msgid "Vertical, then horizontal"
msgstr "Vertikalt, sedan horisontellt"
#: pcbnew/dialogs/dialog_create_array_base.cpp:118
msgid "Numbering Direction"
msgstr "Nummerriktning"
#: pcbnew/dialogs/dialog_create_array_base.cpp:122
msgid "Reverse numbering on alternate rows/columns"
msgstr "Omvänd numrering på alternativa rader / kolumner"
#: pcbnew/dialogs/dialog_create_array_base.cpp:125
#: pcbnew/dialogs/dialog_create_array_base.cpp:293
msgid "Use first free number"
msgstr "Använd första lediga numret"
#: pcbnew/dialogs/dialog_create_array_base.cpp:125
#: pcbnew/dialogs/dialog_create_array_base.cpp:293
msgid "From start value"
msgstr "Från startvärde"
#: pcbnew/dialogs/dialog_create_array_base.cpp:127
msgid "Initial Pad Number"
msgstr "Ursprungligt lödytenummer"
#: pcbnew/dialogs/dialog_create_array_base.cpp:131
msgid "Continuous (1, 2, 3...)"
msgstr "Kontinuerlig (1, 2, 3 ...)"
#: pcbnew/dialogs/dialog_create_array_base.cpp:131
msgid "Coordinate (A1, A2, ... B1, ...)"
msgstr "Koordinat (A1, A2, ... B1, ...)"
#: pcbnew/dialogs/dialog_create_array_base.cpp:133
msgid "Pad Numbering Scheme"
msgstr "System för numrering av lödytor"
#: pcbnew/dialogs/dialog_create_array_base.cpp:137
msgid "Primary axis numbering:"
msgstr "Primär axelnummerering:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:146
msgid "Secondary axis numbering:"
msgstr "Sekundär axelnummerering:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:165
#: pcbnew/dialogs/dialog_create_array_base.cpp:314
msgid "Pad numbering start:"
msgstr "Pad-numreringsstart:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:179
#: pcbnew/dialogs/dialog_create_array_base.cpp:321
msgid "Pad numbering skip:"
msgstr "Stegstorlek för lödytenumrering:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:206
msgid "Grid Array"
msgstr "Rutnät"
#: pcbnew/dialogs/dialog_create_array_base.cpp:216
msgid "Horizontal center:"
msgstr "Horisontellt centrum:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:227
msgid "Vertical center:"
msgstr "Vertikalt centrum:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:238
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1234
msgid "Radius:"
msgstr "Radie:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:255
msgid ""
"Positive angles represent an anti-clockwise rotation. An angle of 0 will "
"produce a full circle divided evenly into \"Count\" portions."
msgstr ""
"Positiva vinklar representerar en rotation moturs. En vinkel på 0 kommer att "
"producera en hel cirkel jämnt uppdelad i \"Antal\" delar."
#: pcbnew/dialogs/dialog_create_array_base.cpp:268
msgid "How many items in the array."
msgstr "Hur många objekt i matrisen."
#: pcbnew/dialogs/dialog_create_array_base.cpp:272
#: pcbnew/dialogs/dialog_move_exact_base.cpp:52
msgid "Rotate:"
msgstr "Rotera:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:278
msgid ""
"Rotate the item as well as move it - multi-selections will be rotated "
"together"
msgstr "Rotera objektet och flytta det - flerval roteras tillsammans"
#: pcbnew/dialogs/dialog_create_array_base.cpp:291
msgid "Numbering Options"
msgstr "Numreringsalternativ"
#: pcbnew/dialogs/dialog_create_array_base.cpp:295
msgid "Initial Pad Number:"
msgstr "Ursprungligt lödytenummer:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:299
msgid "Pad Numbering:"
msgstr "Pad numrering:"
#: pcbnew/dialogs/dialog_create_array_base.cpp:341
msgid "Circular Array"
msgstr "Cirkulär matris"
#: pcbnew/dialogs/dialog_create_array_base.cpp:350
msgid "Footprint Annotation"
msgstr "Fotavtrycksannotering"
#: pcbnew/dialogs/dialog_create_array_base.cpp:352
msgid "Keep existing reference designators"
msgstr "Behåll befintliga referensbeteckningar"
#: pcbnew/dialogs/dialog_create_array_base.cpp:355
msgid "Assign unique reference designators"
msgstr "Tilldela unika referensbeteckningar"
#: pcbnew/dialogs/dialog_create_array_base.cpp:357
msgid ""
"This can conflict with reference designators in the schematic that have not "
"yet been synchronized with the board."
msgstr ""
"Detta kan orsaka konflikt med referensbeteckningar i schemat som ännu inte "
"synkroniserats med kortet."
#: pcbnew/dialogs/dialog_create_array_base.h:127
msgid "Create Array"
msgstr "Skapa matris"
#: pcbnew/dialogs/dialog_dimension_properties.cpp:223
msgid ""
"This item was on a non-existing layer.\n"
"It has been moved to the first defined layer."
msgstr ""
"Den här artikeln fanns på ett icke-existerande lager.\n"
"Den har flyttats till det första definierade lagret."
#: pcbnew/dialogs/dialog_dimension_properties.cpp:312
msgid "Change dimension properties"
msgstr "Ändra måttsättningens egenskaper"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:22
msgid "Leader Format"
msgstr "Leader-format"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:39
msgid "Text frame:"
msgstr "Textram:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:41
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:49
msgid "Draw a shape around the leader text"
msgstr "Rita en form runt ledartexten"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:53
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:76
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:185
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:121
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:181
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:25
#: pcbnew/dialogs/dialog_text_properties_base.cpp:90
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:76
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:149
msgid "Layer:"
msgstr "Lager:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:69
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:89
msgid "Dimension Format"
msgstr "Måttsättningsformat"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:98
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:104
msgid "Measured value of this dimension"
msgstr "Uppmätt värde för denna dimension"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:108
msgid "Override value"
msgstr "Åsidosätt värde"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:109
msgid ""
"When checked, the actual measurement is ignored and any value can be entered"
msgstr ""
"När det är markerat ignoreras den faktiska mätningen och valfritt värde kan "
"anges"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:116
#: pcbnew/dialogs/dialog_export_idf_base.cpp:44
#: pcbnew/dialogs/dialog_export_step_base.cpp:61
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:63
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:85
msgid "Units:"
msgstr "Enheter:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:118
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:126
msgid ""
"Units of this dimension (\"automatic\" to follow the units selected in the "
"editor)"
msgstr ""
"Enhet för detta mått (\"automatisk\" för att följa de enheter som valts i "
"redigeraren)"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:132
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:137
msgid "Text to print before the dimension value"
msgstr "Text som ska skrivas ut före måttvärdet"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:141
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:112
msgid "Units format:"
msgstr "Enhetsformat:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:143
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:151
msgid "Choose how to display the units"
msgstr "Välj hur enheterna ska visas"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:147
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:116
msgid "1234"
msgstr "1234"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:147
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:116
msgid "1234 mm"
msgstr "1234 mm"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:147
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:116
msgid "1234 (mm)"
msgstr "1234 (mm)"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:157
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:162
msgid "Text to print after the dimension value"
msgstr "Text som ska skrivas ut efter måttvärdet"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:166
#: pcbnew/dialogs/dialog_gendrill_base.cpp:126
#: pcbnew/dialogs/dialog_plot_base.cpp:371
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:127
msgid "Precision:"
msgstr "Noggrannhet:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:168
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:176
msgid "Choose how many digits of precision to display"
msgstr "Välj hur många precisionssiffror som ska visas"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:347
#: pcbnew/dialogs/dialog_text_properties_base.cpp:237
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:186
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:131
msgid "0.0"
msgstr "0,0"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:131
msgid "0.00"
msgstr "0,00"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:131
msgid "0.000"
msgstr "0,000"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:131
msgid "0.0000"
msgstr "0,0000"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:131
msgid "0.00000"
msgstr "0,00000"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
msgid "0.00 in / 0 mils / 0.0 mm"
msgstr "0,00 tum / 0 mils / 0,0 mm"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
msgid "0.000 / 0 / 0.00"
msgstr "0,000 / 0 / 0,00"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
msgid "0.0000 / 0.0 / 0.000"
msgstr "0,0000 / 0,0 / 0,000"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
msgid "0.00000 / 0.00 / 0.0000"
msgstr "0,00000 / 0,00 / 0,0000"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:180
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:150
msgid "Suppress trailing zeroes"
msgstr "Undertryck avslutande nollor"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:181
msgid ""
"When checked, \"0.100\" will be shown as \"0.1\" even if the precision "
"setting is higher"
msgstr ""
"När detta är valt, visas \"0.100\" som \"0.1\" även om inställd precision är "
"högre"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:211
msgid "Dimension Text"
msgstr "Måttsättningstext"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:274
#: pcbnew/dialogs/dialog_text_properties_base.cpp:167
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:139
msgid "Text width"
msgstr "Text bredd"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:290
#: pcbnew/dialogs/dialog_text_properties_base.cpp:206
msgid "Text pos X"
msgstr "Text-pos X"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:303
#: pcbnew/dialogs/dialog_text_properties_base.cpp:180
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:155
msgid "Text height"
msgstr "Text höjd"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:316
#: pcbnew/dialogs/dialog_text_properties_base.cpp:219
msgid "Text pos Y"
msgstr "Text-pos Y"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:327
#: pcbnew/dialogs/dialog_target_properties_base.cpp:39
#: pcbnew/dialogs/dialog_text_properties_base.cpp:191
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:166
msgid "Thickness:"
msgstr "Tjocklek:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:329
#: pcbnew/dialogs/dialog_text_properties_base.cpp:193
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:168
msgid "Text thickness"
msgstr "Texttjocklek"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:342
#: pcbnew/dialogs/dialog_text_properties_base.cpp:232
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:181
msgid "Text orientation"
msgstr "Textriktning"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:348
#: pcbnew/dialogs/dialog_text_properties_base.cpp:238
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:187
msgid "90.0"
msgstr "90,0"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:349
#: pcbnew/dialogs/dialog_text_properties_base.cpp:239
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:188
msgid "-90.0"
msgstr "-90,0"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:350
#: pcbnew/dialogs/dialog_text_properties_base.cpp:240
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:189
msgid "180.0"
msgstr "180,0"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:353
msgid "Position mode:"
msgstr "Positionsläge:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:357
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:104
msgid "Outside"
msgstr "Utanför"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:357
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:104
msgid "Inline"
msgstr "I kö"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:357
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:68
msgid "Manual"
msgstr "Manual"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:361
msgid "Choose how to position the text relative to the dimension line"
msgstr "Välj hur texten ska placeras relativt måttlinjen"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:365
msgid "Keep aligned with dimension"
msgstr "Håll i linje med måttet"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:366
msgid "Automatically set the text orientation to match the dimension lines"
msgstr "Ställ automatiskt in textriktningen så att den matchar måttlinjerna"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:380
msgid "Dimension Line"
msgstr "Måttsättningslinje"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:389
msgid "Thickness of the dimension lines"
msgstr "Måttlinjernas tjocklek"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:403
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:139
msgid "Arrow length:"
msgstr "Pillängd:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:414
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:155
msgid "Extension line offset:"
msgstr "Förlängningslinje offset:"
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:416
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:421
msgid "Gap between the measured points and the start of the extension lines"
msgstr "Avstånd mellan de uppmätta punkterna och förlängningslinjernas start"
#: pcbnew/dialogs/dialog_dimension_properties_base.h:138
#: pcbnew/pcb_dimension.cpp:1304
msgid "Dimension Properties"
msgstr "Måttsättningens egenskaper"
#: pcbnew/dialogs/dialog_drc.cpp:125
msgid "Run DRC"
msgstr "Kör DRC"
#: pcbnew/dialogs/dialog_drc.cpp:263
msgid "DRC incomplete: could not compile custom design rules. "
msgstr "DRC ofullständig: kunde inte sammanställa anpassade designregler. "
#: pcbnew/dialogs/dialog_drc.cpp:265 pcbnew/tools/board_inspection_tool.cpp:176
msgid "Show design rules."
msgstr "Visa designregler."
#: pcbnew/dialogs/dialog_drc.cpp:310
msgid "-------- DRC cancelled by user.<br><br>"
msgstr "-------- DRC avbröts av användaren.<br><br>"
#: pcbnew/dialogs/dialog_drc.cpp:577
#, c-format
msgid "Remove all exclusions for violations of rule '%s'"
msgstr "Ta bort undantag för överträdelse av regel '%s'"
#: pcbnew/dialogs/dialog_drc.cpp:589
#, c-format
msgid "Exclude all violations of rule '%s'"
msgstr "Undanta alla överträdelser av regel '%s'"
#: pcbnew/dialogs/dialog_drc.cpp:600
msgid "Run clearance resolution tool..."
msgstr "Kör avståndsupplösningsverktyget..."
#: pcbnew/dialogs/dialog_drc.cpp:612
msgid "Run constraints resolution tool..."
msgstr "Kör begränsningssupplösningsverktyget..."
#: pcbnew/dialogs/dialog_drc.cpp:639
msgid "Open the Board Setup... dialog"
msgstr "Öppna dialogrutan \"Mönsterkortsinställningar...\""
#: pcbnew/dialogs/dialog_drc.cpp:869
#, c-format
msgid "Report file '%s' created<br>"
msgstr "Rapportfilen '%s' har skapats <br>"
#: pcbnew/dialogs/dialog_drc.cpp:1132
msgid "Do you wish to delete excluded markers as well?"
msgstr "Vill du också ta bort uteslutna markörer?"
#: pcbnew/dialogs/dialog_drc.cpp:1135
msgid "Delete exclusions"
msgstr "Ta bort undantag"
#: pcbnew/dialogs/dialog_drc.cpp:1275
msgid "not run"
msgstr "inte körd"
#: pcbnew/dialogs/dialog_drc_base.cpp:27
msgid "Refill all zones before performing DRC"
msgstr "Fyll på alla zoner innan du utför DRC"
#: pcbnew/dialogs/dialog_drc_base.cpp:30
msgid "Report all errors for each track"
msgstr "Rapportera alla fel för varje ledare"
#: pcbnew/dialogs/dialog_drc_base.cpp:31
msgid ""
"If selected, all DRC violations for tracks will be reported. This can be "
"slow for complicated designs.\n"
"\n"
"If unselected, only the first DRC violation will be reported for each track "
"connection."
msgstr ""
"Om valt kommer alla DRC-överträdelser för ledare att rapporteras. Detta kan "
"vara långsamt för komplicerade mönsterkort.\n"
"\n"
"Om det inte är markerat kommer endast den första DRC-överträdelsen för varje "
"ledaranslutning att rapporteras."
#: pcbnew/dialogs/dialog_drc_base.cpp:41
msgid "Test for parity between PCB and schematic"
msgstr "Kontrollera att mönsterkort och kretsschema överensstämmer"
#: pcbnew/dialogs/dialog_drc_base.cpp:119
#, c-format
msgid "Unconnected Items (%s)"
msgstr "Oanslutna objekt (%s)"
#: pcbnew/dialogs/dialog_drc_base.cpp:131
#, c-format
msgid "Schematic Parity (%s)"
msgstr "Kretsschemaparitet (%s)"
#: pcbnew/dialogs/dialog_drc_base.cpp:139
msgid "Edit ignored tests"
msgstr "Ändra ignorerade test"
#: pcbnew/dialogs/dialog_drc_base.h:108 pcbnew/tools/pcb_actions.cpp:240
msgid "Design Rules Checker"
msgstr "Designregelkontroll (DRC)"
#: pcbnew/dialogs/dialog_enum_pads_base.cpp:19
msgid "Pad names are restricted to 4 characters (including number)."
msgstr "Lödytenamnen är begränsade till fyra tecken (inklusive nummer)."
#: pcbnew/dialogs/dialog_enum_pads_base.cpp:32
msgid "Pad name prefix:"
msgstr "Padnamnsprefix:"
#: pcbnew/dialogs/dialog_enum_pads_base.cpp:47
msgid "First pad number:"
msgstr "Första lödytenummer:"
#: pcbnew/dialogs/dialog_enum_pads_base.h:51
msgid "Pad Enumeration Settings"
msgstr "Inställningar för paduppräkning"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:74
msgid "Change Footprints"
msgstr "Byt fotavtryck"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:75
msgid "Change all footprints on board"
msgstr "Byt alla fotavtryck på mönsterkortet"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:76
msgid "Change selected footprint(s)"
msgstr "Ändra markerade fotavtryck"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:77
msgid "Change footprints matching reference designator:"
msgstr "Ändra fotavtryck som matchar referensbeteckning:"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:78
msgid "Change footprints matching value:"
msgstr "Ändra matchningsvärde för fotavtryck:"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:79
msgid "Change footprints with library id:"
msgstr "Ändra fotavtryck med biblioteks-id:"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:80
msgid "Update text layers and visibilities"
msgstr "Uppdatera textlager och synligheter"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:81
msgid "Update text sizes, styles and positions"
msgstr "Uppdatera textstorlekar, stilar och positioner"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:82
msgid "Update fabrication attributes"
msgstr "Uppdatera tillverkningsattribut"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:83
msgid "Update 3D models"
msgstr "Uppdatera 3D-modeller"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:87
msgid ""
"Update/reset strings: there are two cases these descriptions need to cover: "
"the user made overrides to a footprint on the PCB and wants to remove them, "
"or the user made changes to the library footprint and wants to propagate "
"them back to the PCB."
msgstr ""
"Uppdatera / återställ strängar: det finns två fall som dessa beskrivningar "
"måste täcka: användaren har gjort ändringar i ett fotavtryck på "
"mönsterkortet och vill ta bort dem, eller användaren har gjort ändringar i "
"bibliotekets fotavtryck och vill överföra dem till mönsterkortet."
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:358
#, c-format
msgid "Updated footprint %s (%s)"
msgstr "Uppdaterade fotavtryck %s (%s)"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:364
#, c-format
msgid "Changed footprint %s from '%s' to '%s'"
msgstr "Ändrade fotavtryck %s från '%s' till '%s'"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:374
msgid "*** library footprint not found ***"
msgstr "*** fotavtryck hittades inte ***"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:394
msgid ": (no changes)"
msgstr ": (inga ändringar)"
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:399
msgid ": OK"
msgstr ": OK"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:24
msgid "Update all footprints on board"
msgstr "Uppdatera alla fotavtryck på mönsterkortet"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:27
msgid "Update selected footprint(s)"
msgstr "Uppdatera valda fotavtryck"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:30
msgid "Update footprints matching reference designator:"
msgstr "Uppdatera fotavtryck som matchar referensbeteckning:"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:38
msgid "Update footprints matching value:"
msgstr "Uppdatera fotavtryck som matchar värde:"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:44
msgid "Update footprints with library id:"
msgstr "Uppdatera fotavtryck med biblioteks-id:"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:73
msgid "New footprint library id:"
msgstr "Nytt id för fotavtrycksbibliotek:"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:96
msgid "Remove text items which are not in library footprint"
msgstr "Ta bort textobjekt som inte finns i bibliotekets fotavtryck"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:101
msgid "Update/reset text layers and visibilities"
msgstr "Uppdatera / återställ textlager och synligheter"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:104
msgid "Update/reset text sizes, styles and positions"
msgstr "Uppdatera / återställ textstorlekar, stilar och positioner"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:107
msgid "Update/reset fabrication attributes"
msgstr "Uppdatera / återställ tillverkningsattribut"
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:110
msgid "Update/reset 3D models"
msgstr "Uppdatera / återställ 3D-modeller"
#: pcbnew/dialogs/dialog_exchange_footprints_base.h:86
msgid "Update Footprints from Library"
msgstr "Uppdatera fotavtryck från biblioteket"
#: pcbnew/dialogs/dialog_export_idf.cpp:161
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:120
#, c-format
msgid "File %s already exists."
msgstr "Filen %s finns redan."
#: pcbnew/dialogs/dialog_export_idf_base.cpp:21
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:22
msgid "File name:"
msgstr "Filnamn:"
#: pcbnew/dialogs/dialog_export_idf_base.cpp:25
msgid "Select an IDF export filename"
msgstr "Välj ett IDF-exportfilnamn"
#: pcbnew/dialogs/dialog_export_idf_base.cpp:25
msgid "*.emn"
msgstr "*.emn"
#: pcbnew/dialogs/dialog_export_idf_base.cpp:34
msgid "Grid reference point:"
msgstr "Gridreferenspunkt:"
#: pcbnew/dialogs/dialog_export_idf_base.cpp:38
msgid "Adjust automatically"
msgstr "Justera automatiskt"
#: pcbnew/dialogs/dialog_export_idf_base.cpp:60
#: pcbnew/dialogs/dialog_export_step_base.cpp:71
msgid "X position:"
msgstr "X-position:"
#: pcbnew/dialogs/dialog_export_idf_base.cpp:81
#: pcbnew/dialogs/dialog_export_step_base.cpp:86
msgid "Y position:"
msgstr "Y-position:"
#: pcbnew/dialogs/dialog_export_idf_base.cpp:104
msgid "Output Units"
msgstr "Utgångsenheter"
#: pcbnew/dialogs/dialog_export_idf_base.h:61
msgid "Export IDFv3"
msgstr "Exportera IDFv3"
#: pcbnew/dialogs/dialog_export_step.cpp:144
msgid "Select a STEP export filename"
msgstr "Välj ett STEP-exportfilnamn"
#: pcbnew/dialogs/dialog_export_step.cpp:145
msgid "STEP files"
msgstr "STEP-filer"
#: pcbnew/dialogs/dialog_export_step.cpp:212
msgid "Non-unity scaled models:"
msgstr "Icke-enhetligt skalade modeller:"
#: pcbnew/dialogs/dialog_export_step.cpp:214
msgid ""
"Scaled models detected. Model scaling is not reliable for mechanical export."
msgstr ""
"Skalade modeller upptäckta. Modellskalning är inte pålitligt för mekanisk "
"exportering."
#: pcbnew/dialogs/dialog_export_step.cpp:216
msgid "Model Scale Warning"
msgstr "Modellskalevarning"
#: pcbnew/dialogs/dialog_export_step.cpp:284
msgid "STEP export failed! Please save the PCB and try again"
msgstr "STEP-export misslyckades! Spara kretskortet och försök igen"
#: pcbnew/dialogs/dialog_export_step.cpp:345
#, c-format
msgid ""
"Board outline is missing or not closed using %.3f mm tolerance.\n"
"Run DRC for a full analysis."
msgstr ""
"Mönsterkortskant saknas eller är inte stängd med %.3f mm tolerans.\n"
"Kör DRC för en fullständig analys."
#: pcbnew/dialogs/dialog_export_step.cpp:357
#: pcbnew/dialogs/dialog_export_step_process_base.h:44
msgid "STEP Export"
msgstr "STEG Export"
#: pcbnew/dialogs/dialog_export_step_base.cpp:26
msgid "temp"
msgstr "temp"
#: pcbnew/dialogs/dialog_export_step_base.cpp:36
msgid "Coordinates"
msgstr "Koordinater"
#: pcbnew/dialogs/dialog_export_step_base.cpp:38
#: pcbnew/dialogs/dialog_gendrill_base.cpp:98
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:23
msgid "Drill/place file origin"
msgstr "Borr- / placeringsfilens origo"
#: pcbnew/dialogs/dialog_export_step_base.cpp:41
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:23
msgid "Grid origin"
msgstr "Rutnäts-origo"
#: pcbnew/dialogs/dialog_export_step_base.cpp:44
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:44
msgid "User defined origin"
msgstr "Användardefinierat origo"
#: pcbnew/dialogs/dialog_export_step_base.cpp:47
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:44
msgid "Board center origin"
msgstr "Origo i mönsterkortets mittpunkt"
#: pcbnew/dialogs/dialog_export_step_base.cpp:54
msgid "User Defined Origin"
msgstr "Användardefinierat origo"
#: pcbnew/dialogs/dialog_export_step_base.cpp:108
msgid "Other Options"
msgstr "Andra Alternativ"
#: pcbnew/dialogs/dialog_export_step_base.cpp:110
msgid "Ignore not mounted components"
msgstr "Ignorera komponenter som ej monteras"
#: pcbnew/dialogs/dialog_export_step_base.cpp:111
msgid "Do not show components not in BOM and not in place file"
msgstr ""
"Visa inte komponenter som inte är med i komponentlistan och inte är med i "
"placeringsfilen"
#: pcbnew/dialogs/dialog_export_step_base.cpp:115
msgid "Substitute similarly named models"
msgstr "Ersätt modeller med liknande namn"
#: pcbnew/dialogs/dialog_export_step_base.cpp:116
msgid "Replace VRML models with STEP models of the same name"
msgstr "Ersätt VRML-modeller med STEP-modeller med samma namn"
#: pcbnew/dialogs/dialog_export_step_base.cpp:120
msgid "Overwrite old file"
msgstr "Skriv över gammal fil"
#: pcbnew/dialogs/dialog_export_step_base.cpp:123
msgid "Board outline chaining tolerance:"
msgstr "Mönsterkortkonturens sammanfogningstolerans:"
#: pcbnew/dialogs/dialog_export_step_base.cpp:127
msgid "Tight (0.001 mm)"
msgstr "Tätt (0,001 mm)"
#: pcbnew/dialogs/dialog_export_step_base.cpp:127
msgid "Standard (0.01 mm)"
msgstr "Standard (0,01 mm)"
#: pcbnew/dialogs/dialog_export_step_base.cpp:127
msgid "Loose (0.1 mm)"
msgstr "Lös (0,1 mm)"
#: pcbnew/dialogs/dialog_export_step_base.cpp:131
msgid ""
"Tolerance sets the distance between two points that are considered joined."
msgstr ""
"Tolerans anger avståndet mellan två punkter som anses vara sammanfogade."
#: pcbnew/dialogs/dialog_export_step_base.h:77
msgid "Export STEP"
msgstr "Exportera STEG"
#: pcbnew/dialogs/dialog_export_svg.cpp:210
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:207
msgid "Use a relative path?"
msgstr "Använd en relativ väg?"
#: pcbnew/dialogs/dialog_export_svg.cpp:220
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:215
#: pcbnew/dialogs/dialog_gendrill.cpp:319
msgid ""
"Cannot make path relative (target volume different from board file volume)!"
msgstr ""
"Det går inte att göra sökväg relativ (målvolym skiljer sig från "
"kortfilsvolym)!"
#: pcbnew/dialogs/dialog_export_svg.cpp:272
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:280
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:388
#: pcbnew/dialogs/dialog_plot.cpp:991
#, c-format
msgid "Could not write plot files to folder '%s'."
msgstr "Det gick inte att skriva plotfiler till mappen '%s'."
#: pcbnew/dialogs/dialog_export_svg.cpp:310
#, c-format
msgid "Exported '%s'."
msgstr "Exporterade '%s'."
#: pcbnew/dialogs/dialog_export_svg_base.cpp:30
msgid ""
"Enter a filename if you do not want to use default file names\n"
"Can be used only when printing the current sheet"
msgstr ""
"Ange ett filnamn om du inte vill använda standardfilnamn\n"
"Kan endast användas vid utskrift av det aktuella arket"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:64
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:496
msgid "Technical layers:"
msgstr "Tekniska lager:"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:83
msgid "Print Mode"
msgstr "Utskriftsläge"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:85
msgid "Export as black elements on a white background"
msgstr "Exportera som svarta element på en vit bakgrund"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:89
msgid "Page with frame and title block"
msgstr "Sida med ram och namnruta"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:89
msgid "Current page size"
msgstr "Aktuell sidstorlek"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:89
msgid "Board area only"
msgstr "Endast kortyta"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:91
msgid "SVG Page Size"
msgstr "SVG-sidstorlek"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:96
msgid "Print the layer(s) horizontally mirrored"
msgstr "Skriv ut lagret / lagren horisontellt spegelvänt"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:100
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:252
msgid "Print one page per layer"
msgstr "Skriv ut en sida per lager"
#: pcbnew/dialogs/dialog_export_svg_base.cpp:106
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:258
msgid "Print board edges on all pages"
msgstr "Skriv ut mönsterkortets kanter på alla sidor"
#: pcbnew/dialogs/dialog_export_svg_base.h:72
msgid "Export SVG File"
msgstr "Exportera SVG-fil"
#: pcbnew/dialogs/dialog_export_vrml.cpp:181
msgid "Are you sure you want to overwrite the existing file?"
msgstr "Är du säker på att du vill skriva över den befintliga filen?"
#: pcbnew/dialogs/dialog_export_vrml.cpp:256
#: pcbnew/plugins/altium/altium_pcb.cpp:1625
#, c-format
msgid "Failed to create folder '%s'."
msgstr "Det gick inte att skapa mappen '%s'."
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:26
msgid "Save VRML Board File"
msgstr "Spara VRML-kortfil"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:26
msgid "*.wrl"
msgstr "*.wrl"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:31
msgid "Footprint 3D model path:"
msgstr "Sökväg för fotavtryckets 3D-modell:"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:46
msgid "Coordinate origin options:"
msgstr "Alternativ för koordinatsystemets origo:"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:53
msgid "User defined origin:"
msgstr "Användardefinierat origo:"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
msgid "meter"
msgstr "meter"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
msgid "0.1 Inch"
msgstr "0,1 tum"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:111
msgid "VRML Units for Output Files"
msgstr "VRML-enheter för producerade filer"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:124
msgid "Copy 3D model files to 3D model path"
msgstr "Kopiera 3D-modellfiler till en 3D-modellväg"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:125
msgid ""
"If checked: copy 3D models to the destination folder\n"
"If not checked: Embed 3D models in the VRML board file"
msgstr ""
"Om ikryssad: Kopiera 3D-modeller till destinationsmappen\n"
"Om inte ikryssad: Bädda in 3D-modeller i kortets VRML-fil"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:129
msgid "Use relative paths to model files in board VRML file"
msgstr "Använd relativa sökvägar för att modellera filer i VRML-fil"
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:130
msgid "Use paths for model files in board VRML file relative to the VRML file"
msgstr ""
"Använd sökvägar för modellfiler i VRML-fil som är relativa till VRML-filen"
#: pcbnew/dialogs/dialog_export_vrml_base.h:67
msgid "VRML Export Options"
msgstr "VRML-exportalternativ"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:22
#: pcbnew/widgets/panel_selection_filter.cpp:183
#: pcbnew/widgets/panel_selection_filter_base.cpp:19
msgid "All items"
msgstr "Alla objekt"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:30
msgid "Include &footprints"
msgstr "Inkludera & fotavtryck"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:33
msgid "Include t&ext items"
msgstr "Inkludera t & ext-objekt"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:36
msgid "Include &locked footprints"
msgstr "Inkludera & låsta fotavtryck"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:39
msgid "Include &drawings"
msgstr "Inkludera & ritningar"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:42
msgid "Include &tracks"
msgstr "Inkludera &ledare"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:45
msgid "Include &board outline layer"
msgstr "Inkludera & kartlägg konturlager"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:48
msgid "Include &vias"
msgstr "Inkludera &vior"
#: pcbnew/dialogs/dialog_filter_selection_base.cpp:51
msgid "Include &zones"
msgstr "Inkludera & zoner"
#: pcbnew/dialogs/dialog_filter_selection_base.h:59
msgid "Filter Selected Items"
msgstr "Filtrera vald objekt"
#: pcbnew/dialogs/dialog_find.cpp:251
msgid "Searching..."
msgstr "Söker..."
#: pcbnew/dialogs/dialog_find.cpp:380
#, c-format
msgid "'%s' not found"
msgstr "'%s' hittades inte"
#: pcbnew/dialogs/dialog_find.cpp:388
msgid "No more items to show"
msgstr "Inga fler objekt att visa"
#: pcbnew/dialogs/dialog_find.cpp:390
msgid "No hits"
msgstr "Inga träffar"
#: pcbnew/dialogs/dialog_find.cpp:396
#, c-format
msgid "'%s' found"
msgstr "'%s' hittades"
#: pcbnew/dialogs/dialog_find.cpp:399
#, c-format
msgid "Hit(s): %ld / %lu"
msgstr "Träff (ar): %ld / %lu"
#: pcbnew/dialogs/dialog_find_base.cpp:28
msgid "Search for:"
msgstr "Sök efter:"
#: pcbnew/dialogs/dialog_find_base.cpp:43
msgid "Match case"
msgstr "Gör skillnad på gemener/VERSALER"
#: pcbnew/dialogs/dialog_find_base.cpp:52
msgid "Wrap"
msgstr "Slå in"
#: pcbnew/dialogs/dialog_find_base.cpp:62
msgid "Search footprint reference designators"
msgstr "Sök referensbeteckningar för fotavtryck"
#: pcbnew/dialogs/dialog_find_base.cpp:66
msgid "Search footprint values"
msgstr "Sök efter värden för fotavtryck"
#: pcbnew/dialogs/dialog_find_base.cpp:70
msgid "Search other text items"
msgstr "Sök i andra textobjekt"
#: pcbnew/dialogs/dialog_find_base.cpp:74
msgid "Search DRC markers"
msgstr "Sök efter DRC-markörer"
#: pcbnew/dialogs/dialog_find_base.cpp:78
msgid "Search net names"
msgstr "Sök nätnamn"
#: pcbnew/dialogs/dialog_find_base.cpp:96
msgid "Find Previous"
msgstr "Sök föregående"
#: pcbnew/dialogs/dialog_find_base.cpp:99
msgid "Restart Search"
msgstr "Starta om sökningen"
#: pcbnew/dialogs/dialog_footprint_checker.cpp:61
msgid "Run Checks"
msgstr "Kör kontroller"
#: pcbnew/dialogs/dialog_footprint_checker_base.h:71
#: pcbnew/tools/pcb_actions.cpp:458
msgid "Footprint Checker"
msgstr "Fotavtryckskontroll"
#: pcbnew/dialogs/dialog_footprint_properties.cpp:75
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:144
msgid "3D Models"
msgstr "3D-modeller"
#: pcbnew/dialogs/dialog_footprint_properties.cpp:274
#: pcbnew/dialogs/dialog_image_properties.cpp:83
msgid ""
"Locked footprints cannot be freely moved and oriented on the canvas and can "
"only be selected when the 'Locked items' checkbox is enabled in the "
"selection filter."
msgstr ""
"Låsta fotavtryck kan inte flyttas eller roteras fritt, och kan endast väljas "
"när kryssrutan 'Låsta objekt' är aktiverad i urvalsfiltret."
#: pcbnew/dialogs/dialog_footprint_properties.cpp:362
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:416
msgid "Text items must have some content."
msgstr "Textobjekt måste ha något innehåll."
#: pcbnew/dialogs/dialog_footprint_properties.cpp:379
#, c-format
msgid "Text width must be at least %s."
msgstr "Textbredden måste vara minst %s."
#: pcbnew/dialogs/dialog_footprint_properties.cpp:392
#, c-format
msgid "Text width must be at most %s."
msgstr "Textbredden måste vara högst %s."
#: pcbnew/dialogs/dialog_footprint_properties.cpp:408
#, c-format
msgid "Text height must be at least %s."
msgstr "Texthöjden måste vara minst %s."
#: pcbnew/dialogs/dialog_footprint_properties.cpp:421
#, c-format
msgid "Text height must be at most %s."
msgstr "Texthöjden måste vara högst %s."
#: pcbnew/dialogs/dialog_footprint_properties.cpp:438
#, c-format
msgid ""
"Text thickness is too large for the text size.\n"
"It will be clamped at %s."
msgstr ""
"Texttjockleken är för stor för textstorleken.\n"
"Den kommer att begränsas till %s."
#: pcbnew/dialogs/dialog_footprint_properties.cpp:573
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:608
msgid "Modify footprint properties"
msgstr "Ändra egenskaperna för fotavtryck"
#: pcbnew/dialogs/dialog_footprint_properties.cpp:632
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:679
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:421
msgid "Reference and value are mandatory."
msgstr "Referens och värde är obligatoriska."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:53
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:53
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:52
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:45
#: pcbnew/fp_text_grid_table.cpp:100
msgid "Text Items"
msgstr "Textobjekt"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:61
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:49
#: pcbnew/fp_text_grid_table.cpp:108
msgid "Keep Upright"
msgstr "Håll dig upprätt"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:62
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:62
#: pcbnew/fp_text_grid_table.cpp:109
msgid "X Offset"
msgstr "X Offset"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:63
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:63
#: pcbnew/fp_text_grid_table.cpp:110
msgid "Y Offset"
msgstr "Y-förskjutning"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:69
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:69
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:63
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:53
#: pcbnew/fp_text_grid_table.cpp:120 pcbnew/plot_board_layers.cpp:86
msgid "Reference designator"
msgstr "Referensbeteckning"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:143
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:326
msgid "90"
msgstr "90"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:151
msgid "Side:"
msgstr "Sida:"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:177
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:184
#: pcbnew/footprint.cpp:2888
msgid "Fabrication Attributes"
msgstr "Tillverkningsattribut"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:182
#: pcbnew/footprint_libraries_utils.cpp:1243
msgid "Footprint type:"
msgstr "Fotavtryckstyp:"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:186
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:193
#: pcbnew/footprint.cpp:767 pcbnew/footprint_libraries_utils.cpp:1244
msgid "Through hole"
msgstr "Hålmonteringshål"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:186
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:193
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:41 pcbnew/footprint.cpp:764
#: pcbnew/footprint_libraries_utils.cpp:1244 pcbnew/pad.cpp:1221
#: pcbnew/pad.cpp:1691
msgid "SMD"
msgstr "SMD"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:198
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:202
#: pcbnew/footprint.cpp:2890
msgid "Not in schematic"
msgstr "Ej i kretsschemat"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:201
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:205
#: pcbnew/footprint.cpp:2892
msgid "Exclude from position files"
msgstr "Uteslut från positionsfiler"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:204
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:208
#: pcbnew/footprint.cpp:2895
msgid "Exclude from BOM"
msgstr "Uteslut från komponentlistan"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:207
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:211
#: pcbnew/footprint.cpp:2902
msgid "Exempt from courtyard requirement"
msgstr "Undanta från krav på gårdsplan (courtyard)"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:208
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:212
msgid "Will not generate \"missing courtyard\" DRC violations"
msgstr "Genererar inte DRC-överträdelse för saknad gårdsplan (courtyard)"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:224
msgid "Update Footprint from Library..."
msgstr "Uppdatera fotavtryck från biblioteket..."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:227
#: pcbnew/tools/pcb_actions.cpp:483
msgid "Change Footprint..."
msgstr "Ändra fotavtryck ..."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:236
#: pcbnew/tools/pcb_actions.cpp:256
msgid "Edit Library Footprint..."
msgstr "Redigera biblioteksavtryck ..."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:261
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:232
msgid "Clearances"
msgstr "Avstånd"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:263
msgid "Set values to 0 to use Board Setup values."
msgstr "Ställ in värden på 0 för att använda Board Setup-värden."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:273
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:244
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:588
msgid "Pad clearance:"
msgstr "Lödytans isolationsavstånd:"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:275
msgid ""
"This is the local net clearance for all pad of this footprint\n"
"If 0, the Netclass values are used\n"
"This value can be superseded by a pad local value."
msgstr ""
"Detta är det lokala nätavståndet för alla delar av detta fotavtryck\n"
"Om 0 används Netclass-värdena\n"
"Det här värdet kan ersättas med ett pad-lokalt värde."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:286
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:257
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:601
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:54
msgid "Solder mask expansion:"
msgstr "Lödmaskens frigång:"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:288
msgid ""
"This is the local clearance between pads and the solder mask for this "
"footprint.\n"
"This value can be superseded by a pad local value.\n"
"If 0, the global value is used."
msgstr ""
"Detta är den lokala frigången mellan lödytorna och lödmasken för detta "
"fotavtryck.\n"
"Det här värdet kan ersättas med ett lokalt värde per lödyta.\n"
"Om 0 används det globala värdet."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:299
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:270
msgid "Allow bridged solder mask apertures between pads"
msgstr "Tillåt överbryggade lödmasköppningar mellan lödytor"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:302
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:273
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:614
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:101
msgid "Solder paste absolute clearance:"
msgstr "Absolut marginal för lodpasta:"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:304
msgid ""
"This is the local clearance between pads and the solder paste for this "
"footprint.\n"
"This value can be superseded by a pad local values.\n"
"The final clearance value is the sum of this value and the clearance value "
"ratio.\n"
"A negative value means a smaller stencil aperture size than pad size."
msgstr ""
"Detta är den lokala marginalen mellan lödytor och lodpasta för detta "
"fotavtryck.\n"
"Detta värde kan ersättas med ett lokalt värde per lödyta.\n"
"Det slutliga avståndet är summan av detta värde och den proportionella "
"marginalen.\n"
"Ett negativt värde betyder en masköppning mindre än lödytan."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:315
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:286
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:627
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:116
msgid "Solder paste relative clearance:"
msgstr "Relativ marginal för lodpasta:"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:317
#, c-format
msgid ""
"This is the local clearance ratio applied as a percentage of the pad width "
"and height for this footprint.\n"
"A value of 10 means the horizontal clearance value is 10% of the pad’s "
"width, and the vertical clearance value is 10% of the pad’s height.\n"
"This value can be superseded by a pad local value.\n"
"The final clearance value is the sum of this value and the absolute "
"clearance value.\n"
"A negative value means a smaller stencil aperture size than pad size."
msgstr ""
"Detta är det lokala proportionella marginalen i procent mellan lödytor och "
"lodpasta för detta fotavtryck.\n"
"Ett värde på 10 betyder att marginalen är 10 procent av lödytans storlek "
"horisontellt respektive vertikalt.\n"
"Det här värdet kan ersättas med ett individuellt värde per lödyta.\n"
"Den slutliga marginalbredden är summan av detta värde och det absoluta "
"marginalvärdet.\n"
"Ett negativt värde betyder en masköppning för lodpasta som är mindre än "
"lödytan."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:340
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:311
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:649
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:673
msgid ""
"Note: solder mask and paste values are used only for pads on copper layers."
msgstr ""
"Obs! Värden för lödmask och lodpasta används endast för lödytor på "
"kopparlager."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:344
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:315
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:653
msgid ""
"Note: solder paste clearances (absolute and relative) are added to determine "
"the final clearance."
msgstr ""
"Anmärkning: Marginalerna för lodpasta (absolut och relativ) adderas för att "
"bestämma den slutliga marginalen."
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:352
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:323
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:691
msgid "Connection to Copper Zones"
msgstr "Anslutning till kopparzoner"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:354
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:325
msgid "Pad connection to zones:"
msgstr "Lödyteanslutning till zoner:"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:358
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:329
msgid "Use zone setting"
msgstr "Använd zoninställning"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:358
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:329
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:703
msgid "Thermal relief"
msgstr "Termisk avlastning"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:371
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:396
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:783
msgid "Clearance Overrides and Settings"
msgstr "Lokala undantag för frigång och inställningar"
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:390
msgid ""
"The library ID and footprint ID currently assigned. Use \"Change "
"Footprint...\" to assign a different footprint."
msgstr ""
"Biblioteks-ID och fotavtryck-ID som för närvarande tilldelats. Använd "
"\"Ändra fotavtryck ...\" för att tilldela ett annat fotavtryck."
#: pcbnew/dialogs/dialog_footprint_properties_base.h:121
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.h:113
#: pcbnew/footprint.cpp:2869
msgid "Footprint Properties"
msgstr "Egenskaper för fotavtryck"
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:370
msgid "Footprint must have a name."
msgstr "Fotavtrycket måste ha ett namn."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:375
#, c-format
msgid "Footprint name may not contain '%s'."
msgstr "Fotavtryckets namn kan inte innehålla '%s'."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:427
#, c-format
msgid "The text width must be between %s and %s."
msgstr "Textbredden måste vara mellan %s och %s."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:439
#, c-format
msgid "The text height must be between %s and %s."
msgstr "Texthöjden måste vara mellan %s och %s."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:457
#: pcbnew/dialogs/dialog_text_properties.cpp:421
#: pcbnew/dialogs/dialog_textbox_properties.cpp:354
msgid ""
"The text thickness is too large for the text size.\n"
"It will be clamped."
msgstr ""
"Texttjockleken är för stor för textstorleken.\n"
"Det kommer att klämmas fast."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:61
msgid "Unconstrained"
msgstr "Otvungen"
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:107
msgid "Footprint name:"
msgstr "Fotavtrycksnamn:"
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:136
msgid "Private Layers"
msgstr "Privata lager"
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:189
msgid "Component type:"
msgstr "Komponenttyp:"
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:234
msgid "Set values to 0 to use netclass values."
msgstr "Ställ in värden på 0 för att använda nätklassvärden."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:246
msgid ""
"This is the local net clearance for all pads of this footprint.\n"
"If 0, the Netclass values are used.\n"
"This value can be overridden on a pad-by-pad basis in the Local\n"
"Clearance and Settings tab of Pad Properties."
msgstr ""
"Detta är det lokala nätisolationsavståndet för alla lödytor i detta "
"fotavtryck.\n"
"Om 0 används värden från nätklassinställningarna.\n"
"Detta värde kan åsidosättas individuellt per lödyta i fliken\n"
"\"Lokala avstånd och inställningar\" i lödyte-egenskaper."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:259
msgid ""
"This is the local clearance between pads and the solder mask for \n"
"this footprint.\n"
"If 0, the global value is used.\n"
"This value can be overridden on a pad-by-pad basis in the Local\n"
"Clearance and Settings tab of Pad Properties."
msgstr ""
"Detta är den lokala frigången mellan lödytorna och lödmasken för\n"
"detta fotavtryck.\n"
"Om 0 används det globala värdet.\n"
"Detta värde kan åsidosättas för individuella lödytor i lödyteegenskapernas\n"
"flik för lokala avstånd och inställningar."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:275
msgid ""
"This is the local clearance between pads and the solder paste for\n"
"this footprint.\n"
"The final clearance value is the sum of this value and the clearance value "
"ratio.\n"
"A negative value means a smaller stencil aperture size than pad size.\n"
"This value can be overridden on a pad-by-pad basis in the Local\n"
"Clearance and Settings tab of Pad Properties."
msgstr ""
"Detta är den lokala marginalen mellan lödytor och lodpasta för\n"
"detta fotavtryck.\n"
"Den slutliga marginalbredden är summan av detta värde och den relativa "
"marginalen.\n"
"Ett negativt värde betyder en masköppning för lodpasta mindre än lödytan.\n"
"Detta värde kan åsidosättas av ett individuellt värde per lödyta i fliken\n"
"\"Lokala avstånd och inställningar\" i Lödyte-egenskaper."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:288
#, c-format
msgid ""
"This is the local clearance ratio applied as a percentage of the pad width "
"and height for this footprint.\n"
"A value of 10 means the horizontal clearance value is 10% of the pad’s "
"width, and the vertical clearance value is 10% of the pad’s height.\n"
"The final clearance value is the sum of this value and the absolute "
"clearance value.\n"
"A negative value means a smaller stencil aperture size than pad size.\n"
"This value can be overridden on a pad-by-pad basis in the Local Clearance "
"and Settings tab of Pad Properties."
msgstr ""
"Detta är den lokala proportionella marginalen mellan lödytor och lodpasta "
"för detta fotavtryck, angiven i procent av lödytans höjd respektive bredd.\n"
"Ett värde på 10 betyder att marginalen är 10 procent av lödytans storlek "
"horisontellt respektive vertikalt.\n"
"Den slutliga marginalen är summan av detta värde och den absoluta "
"marginalen.\n"
"Ett negativt värde betyder att masköppningen för lodpasta är mindre än "
"lödytan.\n"
"Detta värde kan åsidosättas individuellt per lödyta i fliken \"Lokala "
"avstånd och inställningar\" i Lödyte-egenskaper."
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:339
msgid "Net Ties"
msgstr "Nätbryggor"
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:341
msgid "Pad groups allowed to short different nets:"
msgstr "Lödytegrupper som tillåts förbinda olika nät:"
#: pcbnew/dialogs/dialog_footprint_wizard_list.cpp:143
msgid "All footprint generator scripts were loaded"
msgstr "Alla fotavtrycksgeneratorskript laddades"
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:65
msgid "Available Footprint Generators"
msgstr "Tillgängliga fotavtrycksgeneratorer"
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:70
msgid "Search paths:"
msgstr "Sökvägar:"
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:77
msgid "Not loadable python scripts:"
msgstr "Inte laddningsbara python-skript:"
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:84
msgid "Show Trace"
msgstr "Visa ledare"
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:98
msgid "Update Python Modules"
msgstr "Uppdatera Python-moduler"
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.h:65
msgid "Footprint Generators"
msgstr "Fotavtrycksgeneratorer"
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.h:85
msgid "Traceback of Python Script Errors"
msgstr "Spårning av Python-skriptfel"
#: pcbnew/dialogs/dialog_fp_plugin_options.cpp:38
msgid ""
"Select an <b>Option Choice</b> in the listbox above, and then click the "
"<b>Append Selected Option</b> button."
msgstr ""
"Välj ett <b> alternativval </b> i listfältet ovan och klicka sedan på <b> "
"Lägg till valt alternativ </b>."
#: pcbnew/dialogs/dialog_fp_plugin_options.cpp:63
#, c-format
msgid "Options for Library '%s'"
msgstr "Alternativ för bibliotek '%s'"
#: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:26
msgid "Plugin Options"
msgstr "Pluginalternativ"
#: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:78
msgid "Option Choices"
msgstr "Alternativval"
#: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:81
msgid "Options supported by current plugin"
msgstr "Alternativ som stöds av nuvarande plugin"
#: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:85
msgid "<< Append Selected Option"
msgstr "<< Lägg till valt alternativ"
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:64
msgid "Generate Position File"
msgstr "Skapa positionsfil"
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:303
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:435
#, c-format
msgid "Front (top side) placement file: '%s'."
msgstr "Placeringsfil för framsidan (överst): \"%s\"."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:306
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:328
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:439
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:484
#, c-format
msgid "Component count: %d."
msgstr "Komponentantal: %d."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:325
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:481
#, c-format
msgid "Back (bottom side) placement file: '%s'."
msgstr "Placeringsfil för baksidan (nedre sidan): \"%s\"."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:332
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:491
#, c-format
msgid "Full component count: %d."
msgstr "Totalt antal komponenter: %d."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:335
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:444
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:495
msgid "File generation successful."
msgstr "Filen skapades."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:362
msgid "No footprint for automated placement."
msgstr "Inget fotavtryck för automatiserad placering."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:433
#, c-format
msgid "Placement file: '%s'."
msgstr "Placeringsfil: \"%s\"."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:568
#, c-format
msgid ""
"Footprint report file created:\n"
"'%s'."
msgstr ""
"Fotavtrycks rapportfil skapad:\n"
"\"%s\"."
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:569
msgid "Footprint Report"
msgstr "Fotavtrycksrapport"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:49
msgid "ASCII"
msgstr "ASCII"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:49
msgid "CSV"
msgstr "CSV"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:49
msgid "Gerber (experimental)"
msgstr "Gerber (experimentell)"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:61
msgid "Separate files for front, back"
msgstr "Separata filer för fram, bak"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:61
msgid "Single file for board"
msgstr "Enkel fil för tavla"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:63
msgid "Files"
msgstr "Filer"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:65
msgid ""
"Creates 2 files: one for each board side or\n"
"Creates only one file containing all footprints to place\n"
msgstr ""
"Skapar 2 filer: en för varje sida av mönsterkortet eller\n"
"Skapar bara en fil som innehåller alla fotavtryck att placera\n"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:75
msgid "Include only SMD footprints"
msgstr "Inkludera bara ytmonterade fotavtryck"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:78
msgid "Exclude all footprints with through hole pads"
msgstr "Uteslut alla fotavtryck med hålmonterings-lödytor"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:81
msgid "Include board edge layer"
msgstr "Inkludera lager för mönsterkortets kantlinjer"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:84
#: pcbnew/dialogs/dialog_plot_base.cpp:103
msgid "Use drill/place file origin"
msgstr "Använd borr- / placeringsfilens origo"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:87
msgid "Use negative X coordinates for footprints on bottom layer"
msgstr "Använd negativa X-koordinater för fotavtryck på baksidans lager"
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.h:78
msgid "Generate Placement Files"
msgstr "Generera placeringsfiler"
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:41
msgid "Export to GenCAD settings"
msgstr "Exportera till GenCAD-inställningar"
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:49
msgid "Select a GenCAD export filename"
msgstr "Välj ett GenCAD-exportfilnamn"
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:136
msgid "Flip bottom footprint padstacks"
msgstr "Vänd kragstaplarna för undersidans fotavtryck"
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:137
msgid "Generate unique pin names"
msgstr "Skapa unika stiftnamn"
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:138
msgid "Generate a new shape for each footprint instance (do not reuse shapes)"
msgstr ""
"Skapa en ny form för varje fotavtrycksinstans (använd inte former igen)"
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:139
msgid "Use drill/place file origin as origin"
msgstr "Använd borr- / placeringsfilens origo som origo"
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:140
msgid "Save the origin coordinates in the file"
msgstr "Spara koordinaterna för origo i filen"
#: pcbnew/dialogs/dialog_gendrill.cpp:76
msgid "Generate Drill File"
msgstr "Skapa borrfil"
#: pcbnew/dialogs/dialog_gendrill.cpp:77
msgid "Generate Map File"
msgstr "Skapa kartfil"
#: pcbnew/dialogs/dialog_gendrill.cpp:407
#, c-format
msgid "Could not write drill and/or map files to folder '%s'."
msgstr "Kunde inte skriva borr- och/eller map-filer till mapp '%s'."
#: pcbnew/dialogs/dialog_gendrill.cpp:456
msgid "Save Drill Report File"
msgstr "Spara Drill Report File"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:24
msgid "Output folder:"
msgstr "Katalog för utdata:"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:44
msgid "Drill File Format"
msgstr "Borrfilformat"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:46
msgid "Excellon"
msgstr "Excellon"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:53
msgid ""
"Not recommended.\n"
"Used mostly by users who make the boards themselves."
msgstr ""
"Rekommenderas inte.\n"
"Används mest av användare som tillverkar mönsterkort själva."
#: pcbnew/dialogs/dialog_gendrill_base.cpp:58
msgid ""
"Not recommended.\n"
"Only use it for board houses which do not accept fully featured headers."
msgstr ""
"Rekommenderas inte.\n"
"Använd bara för mönsterkortstillverkare som inte tillåter fullfjädrade "
"rubriker."
#: pcbnew/dialogs/dialog_gendrill_base.cpp:62
msgid "PTH and NPTH in single file"
msgstr "PTH och NPTH i enstaka fil"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:63
msgid ""
"Not recommended.\n"
"Only use for board houses which ask for merged PTH and NPTH into a single "
"file."
msgstr ""
"Rekommenderas inte.\n"
"Använd bara för mönsterkortstillverkare som ber om PTH och NPTH sammanslagna "
"till en enda fil."
#: pcbnew/dialogs/dialog_gendrill_base.cpp:67
msgid "Use route command (recommended)"
msgstr "Använd fräskommando (rekommenderas)"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:67
msgid "Use alternate drill mode"
msgstr "Använd alternativt borrläge"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:69
msgid "Oval Holes Drill Mode"
msgstr "Oval hål borrläge"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:71
msgid ""
"Oval holes frequently create problems for board houses.\n"
"\"Use route command\" uses the usual G00 route command (recommended)\n"
" \"Use alternate mode\" uses another drill/ route command (G85)\n"
"(Use it only if the recommended command does not work)"
msgstr ""
"Ovala hål skapar ofta problem för mönsterkortstillverkare.\n"
"\"Använd fräskommando\" använder det vanliga G00-kommandot (rekommenderas)\n"
"\"Använd alternativt borrläge\" använder ett annat borr-/fräskommando (G85)\n"
"(Använd bara om det rekommenderade kommandot inte fungerar)"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:78
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
msgid "Gerber X2"
msgstr "Gerber X2"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
msgid "PostScript"
msgstr "PostScript"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:86
msgid "Map File Format"
msgstr "Kartfilformat"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:88
msgid "Creates a drill map in PDF or other formats"
msgstr "Skapar en borrkarta i PDF eller andra format"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:100
msgid "Drill Origin"
msgstr "Borr-origo"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:102
msgid ""
"Choose the coordinate origin: absolute or relative to the drill/place file "
"origin"
msgstr ""
"Välj koordinatorigo: absolut eller relativt borr- / placeringsfilens origo"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:108
msgid "Drill Units"
msgstr "Borraggregat"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Decimal format (recommended)"
msgstr "Decimalformat (rekommenderas)"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Suppress leading zeros"
msgstr "Undertryck inledande nollor"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Suppress trailing zeros"
msgstr "Undertryck avslutande nollor"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Keep zeros"
msgstr "Behåll nollor"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:114
msgid "Zeros Format"
msgstr "Nollformat"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:116
msgid "Choose EXCELLON numbers notation"
msgstr "Välj EXCELLON-nummernotering"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:130 pcbnew/pcb_dimension.cpp:317
msgid "Precision"
msgstr "Noggrannhet"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:144
msgid "Hole Counts"
msgstr "Hålräkning"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:151
msgid "Plated pads:"
msgstr "Pläterade lödytor:"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:159
msgid "Non-plated pads:"
msgstr "Icke-pläterade lödytor:"
#: pcbnew/dialogs/dialog_gendrill_base.cpp:183
msgid "Buried vias:"
msgstr "Begravda vior:"
#: pcbnew/dialogs/dialog_gendrill_base.h:93
msgid "Generate Drill Files"
msgstr "Skapa borrfil"
#: pcbnew/dialogs/dialog_get_footprint_by_name_base.cpp:28
#: pcbnew/dialogs/dialog_text_properties_base.cpp:68
msgid "Reference designator:"
msgstr "Referensbeteckning:"
#: pcbnew/dialogs/dialog_get_footprint_by_name_base.cpp:35
msgid "(specify multiple items separated by spaces for successive placement)"
msgstr "(ange flera objekt åtskilda av mellanslag för successiv placering)"
#: pcbnew/dialogs/dialog_get_footprint_by_name_base.cpp:39
msgid "Available footprints:"
msgstr "Tillgängliga fotavtryck:"
#: pcbnew/dialogs/dialog_get_footprint_by_name_base.h:56
#: pcbnew/tools/pcb_actions.cpp:263
msgid "Get and Move Footprint"
msgstr "Få och flytta fotavtryck"
#: pcbnew/dialogs/dialog_global_deletion.cpp:120
msgid "Are you sure you want to delete the entire board?"
msgstr "Är du säker på att du vill ta bort hela kortet?"
#: pcbnew/dialogs/dialog_global_deletion.cpp:121
msgid "Are you sure you want to delete the selected items?"
msgstr "Är du säker på att du vill radera valda kapitel?"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:23
msgid "Items to Delete"
msgstr "Objekt att radera"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:25
#: pcbnew/tools/board_editor_control.cpp:87
#: pcbnew/widgets/appearance_controls.cpp:335
#: pcbnew/widgets/panel_selection_filter.cpp:192
#: pcbnew/widgets/panel_selection_filter_base.cpp:53
msgid "Zones"
msgstr "Zoner"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:31
msgid "Board outlines"
msgstr "Mönsterkortets konturer"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:34
#: pcbnew/widgets/panel_selection_filter.cpp:191
#: pcbnew/widgets/panel_selection_filter_base.cpp:49
msgid "Graphics"
msgstr "Grafik"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:37
#: pcbnew/plot_board_layers.cpp:535
#: pcbnew/widgets/panel_selection_filter.cpp:186
#: pcbnew/widgets/panel_selection_filter_base.cpp:29
msgid "Footprints"
msgstr "Fotavtryck"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:40
msgid "Tracks && vias"
msgstr "Ledare && vior"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:43
msgid "Markers"
msgstr "Markörer"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:46
msgid "Clear board"
msgstr "Töm mönsterkortet"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:55
msgid "Filter Settings"
msgstr "Filterinställningar"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:57
msgid "Locked graphics"
msgstr "Låst grafik"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:60
msgid "Unlocked graphics"
msgstr "Olåst grafik"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:63
msgid "Locked footprints"
msgstr "Låsta fotavtryck"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:66
msgid "Unlocked footprints"
msgstr "Olåsta fotavtryck"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:70
msgid "Locked tracks"
msgstr "Låsta ledare"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:73
msgid "Unlocked tracks"
msgstr "Olåsta ledare"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:84
msgid "All layers"
msgstr "Alla lager"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:84
msgid "Current layer only"
msgstr "Endast nuvarande lager"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:86
msgid "Layer Filter"
msgstr "Lagerfilter"
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:102
msgid "Current layer:"
msgstr "Nuvarande lager:"
#: pcbnew/dialogs/dialog_global_deletion_base.h:73
msgid "Delete Items"
msgstr "Ta bort objekt"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:139
msgid "Other text items"
msgstr "Andra textelement"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:140
msgid "Graphic items"
msgstr "Grafiska element"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:255
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:133
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:55
msgid "Silk Layers"
msgstr "Anvisningstryckslager"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:256
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:134
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:56
msgid "Copper Layers"
msgstr "Kopparlager"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:257
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:135
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:57
msgid "Edge Cuts"
msgstr "Kantsnitt"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:258
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:136
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:58
msgid "Courtyards"
msgstr "Gårdsplaner"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:259
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:137
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:59
msgid "Fab Layers"
msgstr "Fab lager"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:260
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:138
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:60
msgid "Other Layers"
msgstr "Andra lager"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:262
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:123
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:44
msgid "Line Thickness"
msgstr "Linjetjocklek"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:270
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:124
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:45
#: pcbnew/fp_textbox.cpp:317 pcbnew/pcb_dimension.cpp:332
#: pcbnew/pcb_textbox.cpp:311
msgid "Text Width"
msgstr "Textbredd"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:276
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:125
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:46
#: pcbnew/fp_textbox.cpp:318 pcbnew/pcb_dimension.cpp:334
#: pcbnew/pcb_textbox.cpp:312 pcbnew/tools/board_inspection_tool.cpp:287
msgid "Text Height"
msgstr "Texthöjd"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:282
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:126
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:47
#: pcbnew/pcb_dimension.cpp:330 pcbnew/pcb_textbox.cpp:310
#: pcbnew/tools/board_inspection_tool.cpp:302
msgid "Text Thickness"
msgstr "Texttjocklek"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:294
msgid "Upright"
msgstr "Upprätt"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:34
msgid "Other footprint text items"
msgstr "Andra textavtryck"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:37
msgid "Footprint graphic items"
msgstr "Fotavtryck grafiska objekt"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:43
msgid "PCB graphic items"
msgstr "PCB-grafiska objekt"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:46
msgid "PCB text items"
msgstr "PCB-textobjekt"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:61
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:71
msgid "Filter items by layer:"
msgstr "Filtrera objekt efter lager:"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:79
msgid "Filter items by parent footprint library id:"
msgstr "Filtrera objekt efter överordnat fotavtryck biblioteks-id:"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:106
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:92
msgid "Set to specified values:"
msgstr "Ställ in till angivna värden:"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:222
#: pcbnew/dialogs/dialog_text_properties_base.cpp:103
msgid "Keep upright"
msgstr "Håll dig upprätt"
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:246
msgid "Set to layer default values:"
msgstr "Använd standardvärden för lager:"
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:229
#: pcbnew/tools/board_inspection_tool.cpp:346
#: pcbnew/tools/board_inspection_tool.cpp:1170
msgid "Via Diameter"
msgstr "Via diameter"
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:231
msgid "uVia Diameter"
msgstr "Mikrovia diameter"
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:39
msgid "Filter Items"
msgstr "Filtrera objekt"
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:57
msgid "Filter items by net class:"
msgstr "Filtrera objekt efter nätklass:"
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:132
msgid "Set to net class values:"
msgstr "Ställ in nätklassvärden:"
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.h:77
msgid "Set Track and Via Properties"
msgstr "Ställ in egenskaper för ledare och vias"
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:30
#: pcbnew/drc/drc_engine.cpp:1399
msgid "footprint"
msgstr "fotavtryck"
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:59
#, c-format
msgid "Error occurred writing empty footprint library table '%s'."
msgstr "Fel uppstod vid skrivning av tom fotavtrycksbibliotekstabell '%s'."
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:73
msgid "Please select a footprint library table file."
msgstr "Välj en fil för bibliotekstabell för fotavtryck."
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:95
#, c-format
msgid "'%s' is not a valid footprint library table."
msgstr "'%s' är inte en giltig fotavtrycksbibliotekstabell."
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:106
#, c-format
msgid "Cannot create library table path '%s'."
msgstr "Kan inte skapa bibliotekstabellssökväg '%s'."
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:114
#, c-format
msgid ""
"Cannot copy footprint library table from:\n"
"%s\n"
"to:\n"
"%s."
msgstr ""
"Kan inte kopiera fotavtrcyksbibliotekstabell från:\n"
"%s\n"
"till:\n"
"%s."
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:133
msgid "Error loading footprint library table."
msgstr "Fel vid inläsning av fotavtrycksbibliotekstabell."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:210
msgid "Circle Properties"
msgstr "Cirkelegenskaper"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:211
msgid "Center Point"
msgstr "Centrumpunkt"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:223
msgid "Arc Properties"
msgstr "Båg-egenskaper"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:229
msgid "Polygon Properties"
msgstr "Polygonegenskaper"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:235
msgid "Rectangle Properties"
msgstr "Rektangelegenskaper"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:241
msgid "Line Segment Properties"
msgstr "Egenskaper för linjesegment"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:252
msgid "Curve Properties"
msgstr "Kurvegenskaper"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:404
msgid "Modify drawing properties"
msgstr "Ändra ritningsegenskaper"
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:427
msgid "Arc angle cannot be zero."
msgstr "Bågvinkeln kan inte vara noll."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:431
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:447
#, c-format
msgid "Invalid Arc with radius %f and angle %f."
msgstr "Ogiltig båge med radie %f och vinkel %f."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:453
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:485
msgid "Line width must be greater than zero."
msgstr "Linjebredden måste vara större än noll."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:460
msgid "Radius must be greater than zero."
msgstr "Radien måste vara större än noll."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:463
msgid "Line width must be greater than zero for an unfilled circle."
msgstr "Linjebredden måste vara större än 0 för en ofylld cirkel."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:470
msgid "Rectangle cannot be empty."
msgstr "Rektangeln kan inte vara tom."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:473
msgid "Line width must be greater than zero for an unfilled rectangle."
msgstr "Linjebredden måste vara större än 0 för en ofylld rektangel."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:479
msgid "Line width must be greater than zero for an unfilled polygon."
msgstr "Linjebredden måste vara större än 0 för en ofylld polygon."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:491
msgid "Line width must be greater than zero for an unfilled curve."
msgstr "Linjebredden måste vara större än 0 för en ofylld kurva."
#: pcbnew/dialogs/dialog_graphic_item_properties.cpp:502
msgid "Error List"
msgstr "Fellista"
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:29
msgid "Start Point"
msgstr "Startpunkt"
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:55
msgid "End Point"
msgstr "Slutpunkt"
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:81
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:107
msgid "Bezier Control Pt"
msgstr "Bezier-kontrollpunkt"
#: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:144
msgid "Arc angle:"
msgstr "Bågvinkel:"
#: pcbnew/dialogs/dialog_graphic_item_properties_base.h:96
msgid "Graphic Item Properties"
msgstr "Egenskaper för grafiska objekt"
#: pcbnew/dialogs/dialog_group_properties.cpp:120
msgid "Modified group"
msgstr "Modifierad grupp"
#: pcbnew/dialogs/dialog_group_properties_base.cpp:30
msgid "Group name:"
msgstr "Gruppnamn:"
#: pcbnew/dialogs/dialog_group_properties_base.cpp:41
msgid "Prevents group from being moved on canvas"
msgstr "Förhindrar förflyttning av grupp på ritbordet"
#: pcbnew/dialogs/dialog_group_properties_base.cpp:45
msgid "Group members:"
msgstr "Gruppmedlemmar:"
#: pcbnew/dialogs/dialog_group_properties_base.h:66
msgid "Group Properties"
msgstr "Gruppegenskaper"
#: pcbnew/dialogs/dialog_import_netlist.cpp:81
msgid "Load and Test Netlist"
msgstr "Ladda och testa nätlista"
#: pcbnew/dialogs/dialog_import_netlist.cpp:123
msgid "Select Netlist"
msgstr "Välj Netlist"
#: pcbnew/dialogs/dialog_import_netlist.cpp:147
msgid "Please choose a valid netlist file."
msgstr "Vänligen välj en giltig nätliste-fil."
#: pcbnew/dialogs/dialog_import_netlist.cpp:153
#: pcbnew/dialogs/dialog_import_netlist.cpp:190
msgid "The netlist file does not exist."
msgstr "Netlist-filen finns inte."
#: pcbnew/dialogs/dialog_import_netlist.cpp:157
#: pcbnew/dialogs/dialog_update_pcb.cpp:134
msgid "Changes Applied to PCB"
msgstr "Ändringar verkställda på mönsterkortet"
#: pcbnew/dialogs/dialog_import_netlist.cpp:225
#, c-format
msgid "Reading netlist file '%s'.\n"
msgstr "Läser nätlistefilen '%s'.\n"
#: pcbnew/dialogs/dialog_import_netlist.cpp:229
msgid "Using reference designators to match symbols and footprints.\n"
msgstr "Använda referensbeteckningar för att matcha symboler och fotavtryck.\n"
#: pcbnew/dialogs/dialog_import_netlist.cpp:231
msgid "Using tstamps (unique IDs) to match symbols and footprints.\n"
msgstr ""
"Använda t-stämplar (unika ID) för att matcha symboler och fotavtryck.\n"
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:26
msgid "Netlist file:"
msgstr "Netlist-fil:"
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:42
msgid "Link footprints using component tstamps (unique ids)"
msgstr "Länka fotavtryck med komponentstämplar (unika id)"
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:42
msgid "Link footprints using reference designators"
msgstr "Länka fotavtryck med hjälp av referensbeteckningar"
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:44
msgid "Link Method"
msgstr "Länkmetod"
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:46
msgid ""
"Select whether to update footprint references to match their currently-"
"assigned symbols, or to re-assign footprints to symbols which match their "
"current references."
msgstr ""
"Välj om du vill uppdatera referenser för fotavtryck så att de matchar deras "
"för närvarande tilldelade symboler eller om du vill tilldela fotavtryck till "
"symboler som matchar deras nuvarande referenser."
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:53
msgid "Replace footprints with those specified in netlist"
msgstr "Ersätt fotavtryck med de som anges i netlista"
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:56
msgid "Delete footprints with no components in netlist"
msgstr "Ta bort fotavtryck utan komponenter i netlist"
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:59
msgid "Delete tracks shorting multiple nets"
msgstr "Ta bort ledare som kortsluter flera nät"
#: pcbnew/dialogs/dialog_import_netlist_base.h:70
msgid "Import Netlist"
msgstr "Importera Netlist"
#: pcbnew/dialogs/dialog_import_settings.cpp:47
#: pcbnew/dialogs/dialog_import_settings.cpp:99
msgid "Deselect All"
msgstr "Ångra &markering"
#: pcbnew/dialogs/dialog_import_settings_base.cpp:51
msgid "Board layers and physical stackup"
msgstr "Mönsterkortslager och fysisk lageruppbyggnad"
#: pcbnew/dialogs/dialog_import_settings_base.cpp:54
msgid "Solder mask/paste defaults"
msgstr "Standardvärden för lödmask / lodpasta"
#: pcbnew/dialogs/dialog_import_settings_base.cpp:57
msgid "Text && graphics default properties"
msgstr "Förinställda text- && grafikegenskaper"
#: pcbnew/dialogs/dialog_import_settings_base.cpp:60
msgid "Text && graphics formatting"
msgstr "Text- && grafikformattering"
#: pcbnew/dialogs/dialog_import_settings_base.cpp:63
msgid "Design rule constraints"
msgstr "Designregler"
#: pcbnew/dialogs/dialog_import_settings_base.cpp:66
msgid "Predefined track && via dimensions"
msgstr "Fördefinierade ledar- och via-dimensioner"
#: pcbnew/dialogs/dialog_imported_layers.cpp:243
#: pcbnew/dialogs/dialog_imported_layers.cpp:251
msgid "Imported Layer"
msgstr "Importerat lager"
#: pcbnew/dialogs/dialog_imported_layers.cpp:259
msgid "KiCad Layer"
msgstr "KiCad-lager"
#: pcbnew/dialogs/dialog_imported_layers.cpp:339
msgid ""
"All required layers (marked with '*') must be matched. Please click on 'Auto-"
"Match Layers' to automatically match the remaining layers"
msgstr ""
"Alla obligatoriska lager (markerade med '*') måste matchas. Klicka på \"Auto-"
"Match Layers\" för att automatiskt matcha de återstående lagren"
#: pcbnew/dialogs/dialog_imported_layers.cpp:342
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:22
msgid "Unmatched Layers"
msgstr "Oöverträffade lager"
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:32
msgid "Imported Layers"
msgstr "Importerade lager"
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:36
msgid "KiCad Layers"
msgstr "KiCad-lager"
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:59
msgid ">"
msgstr ">"
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:61
msgid "Add selected layers to matched layers list."
msgstr "Lägg till markerade lager i listan över matchade lager."
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:65
msgid "<"
msgstr "<"
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:67
msgid "Remove selected layers from matched layers list."
msgstr "Ta bort markerade lager från listan över matchade lager."
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:73
msgid "Remove all matched layers."
msgstr "Ta bort alla matchade lager."
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:81
msgid "Matched Layers"
msgstr "Matchade lager"
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:97
msgid "Auto-Match Layers"
msgstr "Auto-matcha lager"
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:98
msgid "Automatically match any unmatched layers to their KiCad equivalent."
msgstr ""
"Matcha automatiskt alla oöverträffade lager till deras KiCad-motsvarighet."
#: pcbnew/dialogs/dialog_imported_layers_base.h:65
msgid "Edit Mapping of Imported Layers"
msgstr "Redigera kartläggning av importerade lager"
#: pcbnew/dialogs/dialog_layer_selection_base.cpp:122
msgid "Top/Front layer:"
msgstr "Övre / främre lager:"
#: pcbnew/dialogs/dialog_layer_selection_base.cpp:161
msgid "Bottom/Back layer:"
msgstr "Nedre / bakre lagret:"
#: pcbnew/dialogs/dialog_layer_selection_base.h:51
msgid "Select Layer"
msgstr "Välj Lager"
#: pcbnew/dialogs/dialog_layer_selection_base.h:80
msgid "Select Copper Layer Pair"
msgstr "Välj Kopparskiktpar"
#: pcbnew/dialogs/dialog_move_exact.cpp:104
msgid "Rotate around item anchor"
msgstr "Rotera runt objektankare"
#: pcbnew/dialogs/dialog_move_exact.cpp:107
msgid "Rotate around selection center"
msgstr "Rotera runt urvalscentret"
#: pcbnew/dialogs/dialog_move_exact.cpp:110
#: pcbnew/dialogs/dialog_move_exact_base.cpp:69
msgid "Rotate around local coordinates origin"
msgstr "Rotera runt origo för lokala koordinater"
#: pcbnew/dialogs/dialog_move_exact.cpp:113
#: pcbnew/dialogs/dialog_move_exact_base.cpp:69
msgid "Rotate around drill/place origin"
msgstr "Rotera runt borr- / placeringsorigo"
#: pcbnew/dialogs/dialog_move_exact.cpp:206
#: pcbnew/dialogs/dialog_position_relative.cpp:159
msgid "Distance:"
msgstr "Avstånd:"
#: pcbnew/dialogs/dialog_move_exact.cpp:212
#: pcbnew/dialogs/dialog_move_exact_base.cpp:24
msgid "Move X:"
msgstr "Flytta X:"
#: pcbnew/dialogs/dialog_move_exact.cpp:213
#: pcbnew/dialogs/dialog_move_exact_base.cpp:38
msgid "Move Y:"
msgstr "Flytta Y:"
#: pcbnew/dialogs/dialog_move_exact.cpp:286
msgid ""
"Invalid movement values. Movement would place selection outside of the "
"maximum board area."
msgstr ""
"Ogiltiga rörelsevärden. Rörelse skulle placera val utanför det maximala "
"området för mönsterkort."
#: pcbnew/dialogs/dialog_move_exact_base.cpp:69
msgid "Rotate around center of selection"
msgstr "Rotera runt urvalets mitt"
#: pcbnew/dialogs/dialog_move_exact_base.cpp:84
#: pcbnew/dialogs/dialog_position_relative_base.cpp:116
msgid "Use polar coordinates"
msgstr "Använd polära koordinater"
#: pcbnew/dialogs/dialog_move_exact_base.h:71
msgid "Move Item"
msgstr "Flytta objekt"
#: pcbnew/dialogs/dialog_net_inspector.cpp:963 pcbnew/netinfo_item.cpp:87
msgid "Net Code"
msgstr "Nätkod"
#: pcbnew/dialogs/dialog_net_inspector.cpp:964 pcbnew/netinfo_item.cpp:85
msgid "Net Name"
msgstr "Nätnamn"
#: pcbnew/dialogs/dialog_net_inspector.cpp:965
msgid "Pad Count"
msgstr "Lödytor"
#: pcbnew/dialogs/dialog_net_inspector.cpp:966
msgid "Via Count"
msgstr "Vior"
#: pcbnew/dialogs/dialog_net_inspector.cpp:967
msgid "Via Length"
msgstr "Via längd"
#: pcbnew/dialogs/dialog_net_inspector.cpp:968
msgid "Track Length"
msgstr "Ledarlängd"
#: pcbnew/dialogs/dialog_net_inspector.cpp:969
msgid "Die Length"
msgstr "Die längd"
#: pcbnew/dialogs/dialog_net_inspector.cpp:970
msgid "Total Length"
msgstr "Total längd"
#: pcbnew/dialogs/dialog_net_inspector.cpp:970 pcbnew/netinfo_item.cpp:131
msgid "Net Length"
msgstr "Nätets längd"
#: pcbnew/dialogs/dialog_net_inspector.cpp:2003
#: pcbnew/dialogs/dialog_net_inspector.cpp:2060
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:54
msgid "Net name:"
msgstr "Nätnamn:"
#: pcbnew/dialogs/dialog_net_inspector.cpp:2003
msgid "New Net"
msgstr "Nytt nät"
#: pcbnew/dialogs/dialog_net_inspector.cpp:2015
#: pcbnew/dialogs/dialog_net_inspector.cpp:2083
#, c-format
msgid "Net name '%s' is already in use."
msgstr "Nätnamnet '%s' används redan."
#: pcbnew/dialogs/dialog_net_inspector.cpp:2060
msgid "Rename Net"
msgstr "Byt namn på nätet"
#: pcbnew/dialogs/dialog_net_inspector.cpp:2073
msgid "Net name cannot be empty."
msgstr "Nätnamnet kan inte utelämnas."
#: pcbnew/dialogs/dialog_net_inspector.cpp:2142
#, c-format
msgid "Net '%s' is in use. Delete anyway?"
msgstr "Nätet %s används. Radera ändå?"
#: pcbnew/dialogs/dialog_net_inspector.cpp:2183
#, c-format
msgid "Delete all nets in group '%s'?"
msgstr "Radera alla nät i gruppen '%s'?"
#: pcbnew/dialogs/dialog_net_inspector.cpp:2206
#: pcbnew/dialogs/dialog_net_inspector.cpp:2207
msgid "Report file"
msgstr "Rapportera filen"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:30
msgid "Net name filter:"
msgstr "Nätnamnsfilter:"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:37
msgid "Show zero pad nets"
msgstr "Visa nät utan lödytor"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:41
msgid "Group by:"
msgstr "Grupp av:"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:47
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:48
msgid "Wildcard"
msgstr "Jokertecken"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:49
msgid "RegEx"
msgstr "RegEx"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:50
msgid "Wildcard Substr"
msgstr "Delsträng med jokertecken"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:51
msgid "RegEx Substr"
msgstr "RegEx delsträng"
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:90
msgid "Create Report..."
msgstr "Skapa rapport ..."
#: pcbnew/dialogs/dialog_net_inspector_base.h:74
#: pcbnew/tools/pcb_actions.cpp:850
msgid "Net Inspector"
msgstr "Nätinspektör"
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:125
msgid "Convert to Non Copper Zone"
msgstr "Konvertera till icke-kopparzoner"
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:55
msgid "Outline style:"
msgstr "Konturstil:"
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:145
msgid "degree"
msgstr "grad"
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.h:86
msgid "Non Copper Zone Properties"
msgstr "Egenskaper för icke-kopparzoner"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:113
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:142
msgid "Center Point:"
msgstr "Centrumpunkt:"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:132
#: pcbnew/dialogs/dialog_pad_properties.cpp:723
msgid "Ring"
msgstr "Ring"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:196
msgid "Line width may not be 0 for unfilled shapes."
msgstr "Linjebredden kanske inte är 0 för ofyllda former."
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:318
#, c-format
msgid "Corner %d"
msgstr "Hörn %d"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:358
msgid "Polygon must have at least 3 corners"
msgstr "Polygon måste ha minst 3 hörn"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:373
msgid "Polygon must have at least 3 corners after simplification"
msgstr "Polygon måste ha minst 3 hörn efter förenkling"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:379
msgid "Polygon can not be self-intersecting"
msgstr "Polygon kan inte korsa sig själv"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:397
msgid "Note: redundant corners removed"
msgstr "Obs! Redundanta hörn har tagits bort"
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:423
msgid "Select a corner to add the new corner after."
msgstr "Välj ett hörn för att lägga till det nya hörnet efter."
#: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:458
msgid "Select a corner to delete."
msgstr "Välj ett hörn att radera."
#: pcbnew/dialogs/dialog_pad_properties.cpp:168
#: pcbnew/dialogs/dialog_pad_properties_base.h:272 pcbnew/pad.cpp:1749
msgid "Pad Properties"
msgstr "Lödyteegenskaper"
#: pcbnew/dialogs/dialog_pad_properties.cpp:175
msgid "Default Pad Properties for Add Pad Tool"
msgstr ""
"Standardegenskaper för lödytor skapade med verktyget \"Lägg till lödyta\""
#: pcbnew/dialogs/dialog_pad_properties.cpp:493
#, c-format
msgid "Footprint %s (%s), %s, rotated %g deg"
msgstr "Fotavtryck %s (%s), %s, roterad %g grader"
#: pcbnew/dialogs/dialog_pad_properties.cpp:496
#: pcbnew/dialogs/dialog_text_properties.cpp:249
msgid "back side (mirrored)"
msgstr "baksida (spegelvänd)"
#: pcbnew/dialogs/dialog_pad_properties.cpp:496
#: pcbnew/dialogs/dialog_text_properties.cpp:249
msgid "front side"
msgstr "framsida"
#: pcbnew/dialogs/dialog_pad_properties.cpp:697
msgid "width"
msgstr "bredd"
#: pcbnew/dialogs/dialog_pad_properties.cpp:704
#: pcbnew/dialogs/dialog_pad_properties.cpp:710
#: pcbnew/dialogs/dialog_pad_properties.cpp:744
msgid "from"
msgstr "från"
#: pcbnew/dialogs/dialog_pad_properties.cpp:705
#: pcbnew/dialogs/dialog_pad_properties.cpp:711
#: pcbnew/dialogs/dialog_pad_properties.cpp:745
msgid "to"
msgstr "till"
#: pcbnew/dialogs/dialog_pad_properties.cpp:716
msgid "center"
msgstr "Centrerad"
#: pcbnew/dialogs/dialog_pad_properties.cpp:717
msgid "start"
msgstr "start"
#: pcbnew/dialogs/dialog_pad_properties.cpp:718
msgid "angle"
msgstr "vinkel"
#: pcbnew/dialogs/dialog_pad_properties.cpp:727
msgid "at"
msgstr "vid"
#: pcbnew/dialogs/dialog_pad_properties.cpp:728
msgid "radius"
msgstr "radie"
#: pcbnew/dialogs/dialog_pad_properties.cpp:734
#, c-format
msgid "corners count %d"
msgstr "antal hörn %d"
#: pcbnew/dialogs/dialog_pad_properties.cpp:740
#: pcbnew/dialogs/dialog_pad_properties.cpp:2166
msgid "Number box"
msgstr "Nummerruta"
#: pcbnew/dialogs/dialog_pad_properties.cpp:749
msgid "Unknown primitive"
msgstr "Okänd primitiv form"
#: pcbnew/dialogs/dialog_pad_properties.cpp:936
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:284
msgid "All copper layers"
msgstr "Alla kopparskikt"
#: pcbnew/dialogs/dialog_pad_properties.cpp:937
#, c-format
msgid "%s, %s and connected layers"
msgstr "%s, %s och anslutna lager"
#: pcbnew/dialogs/dialog_pad_properties.cpp:940
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:284
msgid "Connected layers only"
msgstr "Endast anslutna lager"
#: pcbnew/dialogs/dialog_pad_properties.cpp:945
#, c-format
msgid "%s and %s"
msgstr "%s och %s"
#: pcbnew/dialogs/dialog_pad_properties.cpp:1250
#: pcbnew/dialogs/dialog_pad_properties.cpp:1255
msgid "Error: Pad must have a positive size."
msgstr "Fel: Lödytan måste ha positiv storlek."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1269
msgid "Warning: Pad hole not inside pad shape."
msgstr "Varning: Lödytans hål ej inom lödytan."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1282
msgid "Warning: Pad hole will leave no copper."
msgstr "Varning: Lödytans hål lämnar inte kvar någon kopparkrage."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1287
msgid "Warning: Negative local clearance values will have no effect."
msgstr "Varning: Negativa lokala värden för frigång har ingen verkan."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1304
msgid ""
"Warning: Negative solder mask clearances larger than some shape primitives. "
"Results may be surprising."
msgstr ""
"Varning: Negativa värden för lödmaskens frigång är större än vissa primitiva "
"former. Resultaten kan bli oförutsägbara."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1313
msgid ""
"Warning: Negative solder mask clearance larger than pad. No solder mask will "
"be generated."
msgstr ""
"Varning: Negativ frigång för lödmask är större än lödytan. Ingen lödmask "
"genereras."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1332
msgid ""
"Warning: Negative solder paste margins larger than pad. No solder paste mask "
"will be generated."
msgstr ""
"Varning: Negativa marginaler för lodpasta som är större än lödytan. Ingen "
"mask för lodpasta kommer att genereras."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1339
msgid "Error: pad has no layer."
msgstr "Fel: lödytan har inget lager."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1345
msgid ""
"Warning: Plated through holes should normally have a copper pad on at least "
"one layer."
msgstr ""
"Varning: Pläterade genomgående hål ska normalt ha en kopparkrage på minst "
"ett lager."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1351
msgid "Error: Trapazoid delta is too large."
msgstr "Fel: Trapezoid-delta är för stort."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1360
msgid "Error: Through hole pad has no hole."
msgstr "Fel: Hålmonteringslödö har inget hål."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1367
msgid ""
"Warning: Connector pads normally have no solder paste. Use a SMD pad instead."
msgstr ""
"Varning: Lödytor för kontakter har vanligtvis ingen lodpasta. Använd "
"istället en lödyta för ytmontering."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1376
msgid "Error: SMD pad has a hole."
msgstr "Fel: SMD-lödyta har ett hål."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1382
msgid "Warning: SMD pad has no outer layers."
msgstr "Varning: SMD-lödytan har inga yttre lager."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1391
msgid "Warning: Fiducial property makes no sense on NPTH pads."
msgstr "Varning: Referenspunkts-egenskapen är meningslös för NPTH-hål."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1397
msgid "Warning: Testpoint property makes no sense on NPTH pads."
msgstr "Varning: Testpunktsegenskapen är meningslös för NPTH-hål."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1403
msgid "Warning: Heatsink property makes no sense of NPTH pads."
msgstr "Varning: Kylfläns-egenskapen är meningslös för NPTH-hål."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1409
msgid "Warning: Castellated property is for PTH pads."
msgstr "Varning: Egenskapen krenelerad lödyta kan endast användas på PTH-hål."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1415
msgid "Warning: BGA property is for SMD pads."
msgstr "Varning: BGA-egenskapen kan bara användas på lödytor för ytmontering."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1424
msgid "Error: Negative corner size."
msgstr "Fel: Negativ hörnstorlek."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1426
msgid "Warning: Corner size will make pad circular."
msgstr "Varning: Hörnstorleken gör lödytan cirkulär."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1436
msgid "Error: Custom pad shape must resolve to a single polygon."
msgstr "Fel: Anpassad lödyteform måste lösas till en enda polygon."
#: pcbnew/dialogs/dialog_pad_properties.cpp:1442
msgid "Pad Properties Errors"
msgstr "Fel för lödyte-egenskaper"
#: pcbnew/dialogs/dialog_pad_properties.cpp:1443
msgid "Pad Properties Warnings"
msgstr "Varningar för lödyte-egenskaper"
#: pcbnew/dialogs/dialog_pad_properties.cpp:1668
msgid "Modify pad"
msgstr "Ändra pad"
#: pcbnew/dialogs/dialog_pad_properties.cpp:1696
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:358
msgid "Hole size X:"
msgstr "Hålstorlek X:"
#: pcbnew/dialogs/dialog_pad_properties.cpp:1708
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:298
msgid "Pad size X:"
msgstr "Lödytans storlek X:"
#: pcbnew/dialogs/dialog_pad_properties.cpp:2079
#: pcbnew/dialogs/dialog_pad_properties.cpp:2219
#: pcbnew/dialogs/dialog_pad_properties.cpp:2250
msgid "No shape selected"
msgstr "Ingen form vald"
#: pcbnew/dialogs/dialog_pad_properties.cpp:2164
msgid "Ring/Circle"
msgstr "Ring / cirkel"
#: pcbnew/dialogs/dialog_pad_properties.cpp:2169
msgid "Shape type:"
msgstr "Formtyp:"
#: pcbnew/dialogs/dialog_pad_properties.cpp:2169
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:810
msgid "Add Primitive"
msgstr "Lägg till primitiv"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:37
msgid "Pad type:"
msgstr "Lödytetyp:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:41 pcbnew/pad.cpp:1690
msgid "Through-hole"
msgstr "Hålmonteringshål"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:41
msgid "Edge Connector"
msgstr "Kortkantskontakt"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:41
msgid "NPTH, Mechanical"
msgstr "NPTH, Mekanisk"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:41
msgid "SMD Aperture"
msgstr "SMD-öppning"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:47
msgid "Pad number:"
msgstr "Lödytenummer:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:97
msgid "Pad shape:"
msgstr "Lödytans form:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:352
msgid "Circular"
msgstr "Cirkulär"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:352 pcbnew/pad.cpp:1205
#: pcbnew/pad.cpp:1698
msgid "Oval"
msgstr "Oval"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101
msgid "Rectangular"
msgstr "Rektangulär"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101
msgid "Trapezoidal"
msgstr "Trapesformad"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101 pcbnew/pad.cpp:1700
msgid "Rounded rectangle"
msgstr "Rundad rektangel"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101 pcbnew/pad.cpp:1701
msgid "Chamfered rectangle"
msgstr "Fasad rektangel"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101
msgid "Chamfered with other corners rounded"
msgstr "Fasad med övriga hörn rundade"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101
msgid "Custom (circular base)"
msgstr "Anpassad (cirkulär bas)"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:101
msgid "Custom (rectangular base)"
msgstr "Anpassad (rektangulär bas)"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:116
msgid "Trapezoid delta:"
msgstr "Trapesformat delta:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:127
msgid "Trapezoid axis:"
msgstr "Trapesformad axel:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:148
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:277
msgid "Corner size:"
msgstr "Hörnstorlek:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:150
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:279
msgid ""
"Corner radius in percent of the pad width.\n"
"The width is the smaller value between size X and size Y.\n"
"The max value is 50 percent."
msgstr ""
"Hörnradie i procent av lödytans bredd.\n"
"Bredden är det mindre värdet mellan storlek X och storlek Y.\n"
"Maxvärdet är 50 procent."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:161
msgid "Corner radius:"
msgstr "Hörnradie:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:163
msgid ""
"Corner radius.\n"
"Can be no more than half pad width.\n"
"The width is the smaller value between size X and size Y.\n"
"Note: IPC norm gives a max value = 0.25mm."
msgstr ""
"Hörnradie.\n"
"Kan inte vara mer än halva lödytans bredd.\n"
"Bredden är det mindre värdet mellan storlek X och storlek Y.\n"
"Obs! IPC-normen ger ett maxvärde = 0,25 mm."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:186
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:236
msgid "Chamfer size:"
msgstr "Fasstorlek:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:188
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:238
msgid ""
"Chamfer size in percent of the pad width.\n"
"The width is the smaller value between size X and size Y.\n"
"The max value is 50 percent."
msgstr ""
"Fasstorlek i procent av lödytans bredd.\n"
"Bredden är det mindre värdet av dimension X och Y.\n"
"Maxvärdet är 50 procent."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:199
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:249
msgid "Chamfer corners:"
msgstr "Fasa hörn:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:201
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:251
msgid ""
"Chamfered corners. The position is relative to a pad orientation 0 degree."
msgstr "Fasade hörn. Positionen är relativt en lödyteorientering 0 grader."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:208
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:258
msgid "Top left"
msgstr "Överst till vänster"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:212
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:262
msgid "Top right"
msgstr "Överst till höger"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:215
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:265
msgid "Bottom left"
msgstr "Nederst till vänster"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:218
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:268
msgid "Bottom right"
msgstr "Nederst till höger"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:348
msgid "Hole shape:"
msgstr "Hålform:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:389
msgid "Offset shape from hole"
msgstr "Förskjut lödyta i förhållande till hål"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:445
msgid "Specify pad to die length"
msgstr "Specificera längd från lödyta till chip"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:480
msgid ""
"Parent footprint on board is flipped.\n"
"Layers will be reversed."
msgstr ""
"Det överordnade fotavtrycket på mönsterkortet är spegelvänt.\n"
"Lagren kommer att vändas."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:500
msgid "Front adhesive"
msgstr "Främre lim"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:503
msgid "Back adhesive"
msgstr "Baksida lim"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:506
msgid "Front solder paste"
msgstr "Lodpasta på framsida"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:509
msgid "Back solder paste"
msgstr "Lodpasta på baksida"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:515
msgid "Back silk screen"
msgstr "Baksida silkskärm"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:521
msgid "Back solder mask"
msgstr "Baksidans lödmask"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:524
msgid "Drafting notes"
msgstr "Utarbeta anteckningar"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:527
msgid "E.C.O.1"
msgstr "E.C.O.1"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:530
msgid "E.C.O.2"
msgstr "E.C.O.2"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:536
msgid "Fabrication property:"
msgstr "Tillverkningsegenskap:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:538
msgid ""
"Optional property to specify a special purpose or constraint in fabrication "
"files:\n"
"BGA attribute is for pads in BGA footprints\n"
"Fiducial local is a fiducial for the parent footprint\n"
"Fiducial global is a fiducial for the whole board\n"
"Test Point pad is useful to specify test points in Gerber files\n"
"Heatsink pad specify a thermal pad\n"
"Castellated specify castellated through hole pads on a board edge\n"
"These properties are specified in Gerber X2 files."
msgstr ""
"Valfri egenskap för att ange ett speciellt syfte eller begränsning i "
"tillverkningsfiler:\n"
"BGA-attributet är för lödytor i BGA-fotavtryck\n"
"Lokal referenspunkt är en referenspunkt för det överordnade fotavtrycket\n"
"Global referenspunkt är en referenspunkt för hela mönsterkortet\n"
"Testpunkt är användbart för att specificera testpunkter i Gerber-filer\n"
"Heatsink pad anger en termisk lödyta för värmeavledning\n"
"Krenelerad lödyta specificerar krenelerade hålmonteringshål (\"halva hål\") "
"på en mönsterkortskant\n"
"Dessa egenskaper anges i Gerber X2-filer."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:545 pcbnew/pad.cpp:1706
msgid "BGA pad"
msgstr "BGA-lödyta"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:545 pcbnew/pad.cpp:1708
msgid "Fiducial, local to footprint"
msgstr "Lokal referenspunkt för fotavtryck"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:545 pcbnew/pad.cpp:1707
msgid "Fiducial, global to board"
msgstr "Global referenspunkt för mönsterkort"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:545 pcbnew/pad.cpp:1709
msgid "Test point pad"
msgstr "Testpunkt"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:545 pcbnew/pad.cpp:1710
msgid "Heatsink pad"
msgstr "Kylfläns"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:545
msgid "Castellated pad (through hole only)"
msgstr "Krenelerad lödyta (endast för hålmonteringshål)"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:567
msgid "Clearance Overrides"
msgstr "Undantag för isolationsavstånd och frigång"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:570
msgid "Set values to 0 to use parent footprint or netclass values."
msgstr ""
"Ställ in värden på 0 för att använda värden definierade i överordnade "
"fotavtryck eller nätklassvärden."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:574
msgid ""
"Positive clearance means area bigger than the pad (usual for mask clearance)."
msgstr ""
"Positivt avstånd betyder område som är större än lödytan (vanligt för "
"lödmaskmarginal)."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:578
msgid ""
"Negative clearance means area smaller than the pad (usual for paste "
"clearance)."
msgstr ""
"Med negativt avstånd menas en yta som är mindre än lödytan (vanligt för "
"marginal för lodpasta)."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:590
msgid ""
"This is the local net clearance for this pad.\n"
"If 0, the footprint local value or the Netclass value is used."
msgstr ""
"Detta är det lokala nätavståndet för denna pad.\n"
"Om 0 används det lokala fotavtrycket eller Netclass-värdet."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:603
msgid ""
"This is the local clearance between this pad and the solder mask.\n"
"If 0, the footprint local value or the global value is used."
msgstr ""
"Detta är den lokala frigången mellan denna lödyta och lödmasken.\n"
"Om 0 används det fotavtryckets lokala värde eller det globala värdet."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:616
msgid ""
"This is the local clearance between this pad and the solder paste.\n"
"If 0, the footprint value or the global value is used.\n"
"The final clearance value is the sum of this value and the clearance value "
"ratio.\n"
"A negative value means a smaller mask size than pad size."
msgstr ""
"Detta är den lokala marginalen mellan denna lödyta och dess lodpasta.\n"
"Om 0, används värdet som är definierat för fotavtrycket, eller det globala "
"värdet.\n"
"Den slutliga marginalen är summan av detta värde och det relativa värdet för "
"marginal.\n"
"Ett negativt värde betyder att masköppningen för lodpasta är mindre än "
"lödytan."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:629
msgid ""
"This is the local clearance ratio in percent between this pad and the solder "
"paste.\n"
"A value of 10 means the clearance value is 10 percent of the pad size.\n"
"If 0, the footprint value or the global value is used.\n"
"The final clearance value is the sum of this value and the clearance value.\n"
"A negative value means a smaller mask size than pad size."
msgstr ""
"Detta är den lokala relativa marginalen i procent mellan denna lödyta och "
"dess lodpasta.\n"
"Ett värde på 10 betyder att marginalen är 10 procent av lödytans storlek.\n"
"Om 0, används värdet som är definierat för fotavtrycket, eller det globala "
"värdet.\n"
"Den slutliga marginalen är summan av detta värde och den absoluta "
"marginalen.\n"
"Ett negativt värde betyder att masköppningen för lodpasta är mindre än "
"lödytan."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:699
msgid "Pad connection:"
msgstr "Lödytans anslutningstyp:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:703
msgid "From parent footprint"
msgstr "Från fotavtryckets förälder"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:709
msgid "Zone knockout:"
msgstr "Zonurtag:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:713
msgid "Pad shape"
msgstr "Lödytans form"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:713
msgid "Pad convex hull"
msgstr "Lödyta konvex form"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:726
msgid "Thermal Relief Overrides"
msgstr "Undantag för termisk avlastning"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:734
msgid "Relief gap:"
msgstr "Termiskt avlastningsgap:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:745
msgid "Spoke width:"
msgstr "Ekerbredd:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:756
msgid "Spoke angle:"
msgstr "Ekervinkel:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:790
msgid "Primitives list:"
msgstr "Primitiv-lista:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:794
msgid "Note: coordinates are relative to anchor pad, orientation 0."
msgstr "Obs: koordinaterna är relativt ankarplattan, orientering 0."
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:813
msgid "Edit Primitive"
msgstr "Redigera primitiv"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:816
msgid "Duplicate Primitive"
msgstr "Duplicera primitiv"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:819
msgid "Transform Primitive"
msgstr "Transformera primitiv"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:825
msgid "Delete Primitive"
msgstr "Ta bort primitiv"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:838
msgid "Custom Shape Primitives"
msgstr "Primitiver för anpassad form"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:972
msgid "Preview pad in sketch mode"
msgstr "Förhandsgranska lödytan i skissläge"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1130
msgid "Start point"
msgstr "Startpunkt"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1156
msgid "Control point 1"
msgstr "Kontrollpunkt 1"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1182
msgid "Control point 2"
msgstr "Kontrollpunkt 2"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1208
msgid "End point"
msgstr "Slutpunkt"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1318
msgid "Move vector"
msgstr "Flytta vektor"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1367
msgid "Scaling factor:"
msgstr "Skalningsfaktor:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1389
msgid "Duplicate:"
msgstr "Duplicera:"
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1557
msgid "Coordinates are relative to anchor pad, rotated 0.0 deg."
msgstr "Koordinaterna är relativt ankarplattan, roterade 0,0 grader."
#: pcbnew/dialogs/dialog_pad_properties_base.h:363
msgid "Pad Custom Shape Geometry Transform"
msgstr "Lödyta med anpassad form - Transformera geometrisk primitiv"
#: pcbnew/dialogs/dialog_pad_properties_base.h:404
msgid "Basic Shape Polygon"
msgstr "Grundform Polygon"
#: pcbnew/dialogs/dialog_plot.cpp:133
msgid "Plot on All Layers"
msgstr "Plotta på alla lager"
#: pcbnew/dialogs/dialog_plot.cpp:162
msgid "Move current selection up"
msgstr "Flytta aktuellt val uppåt"
#: pcbnew/dialogs/dialog_plot.cpp:169
msgid "Move current selection down"
msgstr "Flytta aktuellt val nedåt"
#: pcbnew/dialogs/dialog_plot.cpp:180
msgid "Generate Drill Files..."
msgstr "Skapa borrfiler ..."
#: pcbnew/dialogs/dialog_plot.cpp:820
msgid "HPGL pen size constrained."
msgstr "HPGL-penna storlek begränsad."
#: pcbnew/dialogs/dialog_plot.cpp:838
msgid "X scale constrained."
msgstr "X-skala begränsad."
#: pcbnew/dialogs/dialog_plot.cpp:850
msgid "Y scale constrained."
msgstr "Y-skala begränsad."
#: pcbnew/dialogs/dialog_plot.cpp:866
#, c-format
msgid ""
"Width correction constrained. The width correction value must be in the "
"range of [%s; %s] for the current design rules."
msgstr ""
"Breddkorrigering begränsad. För aktuella designregler måste "
"breddkorrigeringsvärdet vara inom intervallet [%s; %s]."
#: pcbnew/dialogs/dialog_plot.cpp:966
msgid "No layer selected, Nothing to plot"
msgstr "Inget lager valt, inget att plotta"
#: pcbnew/dialogs/dialog_plot.cpp:1031
msgid "Warning: Scale option set to a very small value"
msgstr "Varning: Skalalternativet är inställt på ett mycket litet värde"
#: pcbnew/dialogs/dialog_plot.cpp:1034
msgid "Warning: Scale option set to a very large value"
msgstr "Varning: Skalalternativet är inställt på ett mycket stort värde"
#: pcbnew/dialogs/dialog_plot_base.cpp:24
msgid "Plot format:"
msgstr "Plot-format:"
#: pcbnew/dialogs/dialog_plot_base.cpp:28
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:38
msgid "Gerber"
msgstr "Gerber"
#: pcbnew/dialogs/dialog_plot_base.cpp:54
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:269
msgid "Include Layers"
msgstr "Inkludera lager"
#: pcbnew/dialogs/dialog_plot_base.cpp:75
msgid "Plot border and title block"
msgstr "Ram och namnruta för plot"
#: pcbnew/dialogs/dialog_plot_base.cpp:80
msgid "Plot footprint values"
msgstr "Plotta fotavtrycks värden"
#: pcbnew/dialogs/dialog_plot_base.cpp:84
msgid "Plot reference designators"
msgstr "Plotta referensbeteckningar"
#: pcbnew/dialogs/dialog_plot_base.cpp:88
msgid "Force plotting of invisible values / refs"
msgstr "Tvinga plottning av osynliga värden / referenser"
#: pcbnew/dialogs/dialog_plot_base.cpp:89
msgid "Force plot invisible footprint values and reference designators"
msgstr ""
"Tvinga plottning av osynliga fotavtrycksvärden och referensbeteckningar"
#: pcbnew/dialogs/dialog_plot_base.cpp:93
msgid "Sketch pads on fabrication layers"
msgstr "Rita lödytor på tillverkningslager"
#: pcbnew/dialogs/dialog_plot_base.cpp:94
msgid "Include pad outlines on F.Fab and B.Fab layers when plotting"
msgstr "Inkludera lödytekonturer på lagren F.Fab och B.Fab när du plottar"
#: pcbnew/dialogs/dialog_plot_base.cpp:98
msgid "Do not tent vias"
msgstr "Täck inte vior med lödmask"
#: pcbnew/dialogs/dialog_plot_base.cpp:99
msgid "Remove soldermask on vias"
msgstr "Ta bort lödmask på vior"
#: pcbnew/dialogs/dialog_plot_base.cpp:104
msgid ""
"Use the drill/place file origin as the coordinate origin for plotted files"
msgstr ""
"Använd borr- / placeringsfilens origo som koordinatorigo för plottade filer"
#: pcbnew/dialogs/dialog_plot_base.cpp:108
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:232
msgid "Drill marks:"
msgstr "Borrmärken:"
#: pcbnew/dialogs/dialog_plot_base.cpp:112
msgid "Actual size"
msgstr "Verklig storlek"
#: pcbnew/dialogs/dialog_plot_base.cpp:118
msgid "Scaling:"
msgstr "Skalning:"
#: pcbnew/dialogs/dialog_plot_base.cpp:122
msgid "3:2"
msgstr "3: 2"
#: pcbnew/dialogs/dialog_plot_base.cpp:122
msgid "2:1"
msgstr "2: 1"
#: pcbnew/dialogs/dialog_plot_base.cpp:122
msgid "3:1"
msgstr "3: 1"
#: pcbnew/dialogs/dialog_plot_base.cpp:128
msgid "Plot mode:"
msgstr "Plottläge:"
#: pcbnew/dialogs/dialog_plot_base.cpp:132
msgid "Sketch"
msgstr "Skissa"
#: pcbnew/dialogs/dialog_plot_base.cpp:138
msgid "Mirrored plot"
msgstr "Spegelvänd plot"
#: pcbnew/dialogs/dialog_plot_base.cpp:141
msgid "Negative plot"
msgstr "Negativ plot"
#: pcbnew/dialogs/dialog_plot_base.cpp:144
msgid "Check zone fills before plotting"
msgstr "Kontrollera fyllning av zoner innan plottning"
#: pcbnew/dialogs/dialog_plot_base.cpp:161
msgid "Global solder mask minimum width and/or margin are not set to 0. "
msgstr ""
"Global minimibredd och/eller frigång för lödmask är inte ställd till 0. "
#: pcbnew/dialogs/dialog_plot_base.cpp:165
msgid ""
"Most board manufacturers expect 0 and use their own constraints for solder "
"mask minimum width."
msgstr ""
"De flesta mönsterkortstillverkare förväntar sig 0 och använder sina egna "
"begränsningar för lödmaskens minsta bredd."
#: pcbnew/dialogs/dialog_plot_base.cpp:175
msgid "Board setup"
msgstr "Mönsterkortsinställningar"
#: pcbnew/dialogs/dialog_plot_base.cpp:176
msgid "File > Board Setup..."
msgstr "Arkiv > Board Setup ..."
#: pcbnew/dialogs/dialog_plot_base.cpp:189
msgid "Gerber Options"
msgstr "Gerber-alternativ"
#: pcbnew/dialogs/dialog_plot_base.cpp:196
msgid "Use Protel filename extensions"
msgstr "Använd Protel-filändelser"
#: pcbnew/dialogs/dialog_plot_base.cpp:197
msgid ""
"Use Protel Gerber extensions (.GBL, .GTL, etc...)\n"
"No longer recommended. The official extension is .gbr"
msgstr ""
"Använd Protel Gerber filändelser (.GBL, .GTL, etc ...)\n"
"Rekommenderas inte längre. Den officiella filändelsen är .gbr"
#: pcbnew/dialogs/dialog_plot_base.cpp:202
msgid "Generate Gerber job file"
msgstr "Skapa Gerber-jobbfil"
#: pcbnew/dialogs/dialog_plot_base.cpp:204
msgid ""
"Generate a Gerber job file that contains info about the board,\n"
"and the list of generated Gerber plot files"
msgstr ""
"Skapa en Gerber-jobbfil som innehåller information om mönsterkortet\n"
"och listan över genererade Gerber-plotfiler"
#: pcbnew/dialogs/dialog_plot_base.cpp:209
msgid "Remove silkscreen from areas without soldermask"
msgstr "Ta bort anvisningstryck från områden utan lödmask"
#: pcbnew/dialogs/dialog_plot_base.cpp:213
msgid "Coordinate format:"
msgstr "Koordinatformat:"
#: pcbnew/dialogs/dialog_plot_base.cpp:217
msgid "4.5, unit mm"
msgstr "4,5, enhet mm"
#: pcbnew/dialogs/dialog_plot_base.cpp:217
msgid "4.6, unit mm"
msgstr "4.6, enhet mm"
#: pcbnew/dialogs/dialog_plot_base.cpp:223
msgid "Use extended X2 format (recommended)"
msgstr "Använd utökat X2-format (rekommenderas)"
#: pcbnew/dialogs/dialog_plot_base.cpp:224
msgid ""
"Use X2 Gerber file format.\n"
"Include mainly X2 attributes in Gerber headers.\n"
"If not checked, use X1 format.\n"
"In X1 format, these attributes are included as comments in files."
msgstr ""
"Använd X2 Gerber-filformat.\n"
"Inkludera främst X2-attribut i Gerber-rubriker.\n"
"Om det inte är markerat, använd X1-format.\n"
"I X1-format ingår dessa attribut som kommentarer i filer."
#: pcbnew/dialogs/dialog_plot_base.cpp:228
msgid "Include netlist attributes"
msgstr "Inkludera nätlisteattribut"
#: pcbnew/dialogs/dialog_plot_base.cpp:229
msgid ""
"Include netlist metadata and aperture attributes in Gerber files.\n"
"They are comments in the X1 format.\n"
"Used to check connectivity in CAM tools and Gerber viewers."
msgstr ""
"Inkludera nätliste-metadata och bländaregenskaper i Gerber-filer.\n"
"I X1-format är de kommentarer.\n"
"Används för att kontrollera anslutning i CAM-verktyg och Gerber-visare."
#: pcbnew/dialogs/dialog_plot_base.cpp:233
msgid "Disable aperture macros (not recommended)"
msgstr "Inaktivera bländarmakron (rekommenderas inte)"
#: pcbnew/dialogs/dialog_plot_base.cpp:234
msgid ""
"Disable aperture macros in Gerber files\n"
"Use *only* for broken Gerber viewers."
msgstr ""
"Inaktivera bländarmakron i Gerber-filer\n"
"Använd * endast * för trasiga Gerber-visare."
#: pcbnew/dialogs/dialog_plot_base.cpp:248
msgid "Default pen size:"
msgstr "Standard pennstorlek:"
#: pcbnew/dialogs/dialog_plot_base.cpp:265
msgid "Postscript Options"
msgstr "Alternativ för Postscript"
#: pcbnew/dialogs/dialog_plot_base.cpp:275
msgid "X scale factor:"
msgstr "X-skalfaktor:"
#: pcbnew/dialogs/dialog_plot_base.cpp:280
msgid "Set global X scale adjust for exact scale PostScript output."
msgstr "Ställ in global X-skala för att skapa PostScript-utdata i exakt skala."
#: pcbnew/dialogs/dialog_plot_base.cpp:287
msgid "Y scale factor:"
msgstr "Y-skalfaktor:"
#: pcbnew/dialogs/dialog_plot_base.cpp:292
msgid "Set global Y scale adjust for exact scale PostScript output."
msgstr "Ställ in global Y-skala för att skapa PostScript-utdata i exakt skala."
#: pcbnew/dialogs/dialog_plot_base.cpp:299
msgid "Track width correction:"
msgstr "Ledarbreddskorrigering:"
#: pcbnew/dialogs/dialog_plot_base.cpp:304
msgid ""
"Set global width correction for exact width PostScript output.\n"
"These width correction is intended to compensate tracks width and also pads "
"and vias size errors.\n"
"The reasonable width correction value must be in a range of [-"
"(MinTrackWidth-1), +(MinClearanceValue-1)]."
msgstr ""
"Ställ in global breddkorrigering för PostScript-utdata med exakt bredd.\n"
"Denna breddkorrigering är avsedd att kompensera ledarbredden och även "
"storleksfel på lödytor och vior.\n"
"Det rimliga breddkorrigeringsvärdet måste ligga i intervallet [- "
"(MinTrackWidth-1), + (MinClearanceValue-1)]."
#: pcbnew/dialogs/dialog_plot_base.cpp:315
msgid "Force A4 output"
msgstr "Tvinga utmatning på A4"
#: pcbnew/dialogs/dialog_plot_base.cpp:321
msgid "DXF Options"
msgstr "DXF-alternativ"
#: pcbnew/dialogs/dialog_plot_base.cpp:328
msgid "Uncheck to plot graphic items using their center lines"
msgstr "Avmarkera för att plotta grafiska objekt med hjälp av deras mittlinjer"
#: pcbnew/dialogs/dialog_plot_base.cpp:332
msgid "Use KiCad font to plot text"
msgstr "Använd KiCad-typsnitt för att plotta texter"
#: pcbnew/dialogs/dialog_plot_base.cpp:333
msgid ""
"Check to use KiCad stroke font\n"
"Uncheck to plot single-line ASCII texts as editable text (using DXF font)"
msgstr ""
"Markera för att använda typsnittet KiCad stroke\n"
"Avmarkera för att plotta enradiga ASCII-texter som redigerbar text (med DXF-"
"typsnitt)"
#: pcbnew/dialogs/dialog_plot_base.cpp:346
msgid "Export units:"
msgstr "Måttenhet för export:"
#: pcbnew/dialogs/dialog_plot_base.cpp:354
msgid "The units to use for the exported DXF file"
msgstr "Måttenhet som ska användas för den exporterade DXF-filen"
#: pcbnew/dialogs/dialog_plot_base.cpp:364
msgid "SVG Options"
msgstr "SVG-alternativ"
#: pcbnew/dialogs/dialog_plot_base.cpp:376
msgid ""
"This number defines how many digits are exported that are below 1 mm.\n"
"User unit is 10^-<N> mm\n"
"Choose 4 if you are not sure."
msgstr ""
"Detta nummer bestämmer hur många värdesiffror under 1 mm som exporteras.\n"
"Användarenheten är 10^-<N> mm\n"
"Välj 4 om du är osäker."
#: pcbnew/dialogs/dialog_plot_base.cpp:380
#: pcbnew/dialogs/dialog_plot_base.cpp:393
msgid "Plot in black and white"
msgstr "Skriv ut i svartvitt"
#: pcbnew/dialogs/dialog_plot_base.cpp:381
#: pcbnew/dialogs/dialog_plot_base.cpp:394
msgid "When disabled, the color from the chosen layer will be used to plot."
msgstr ""
"När deaktiverat, kommer färgen från det valda lagret att användas för "
"plottning."
#: pcbnew/dialogs/dialog_plot_base.cpp:391
msgid "PDF Options"
msgstr "PDF-alternativ"
#: pcbnew/dialogs/dialog_plot_base.cpp:420
msgid "Run DRC..."
msgstr "Kör DRC ..."
#: pcbnew/dialogs/dialog_plot_base.cpp:423
#, c-format
msgid "(%d known DRC violations; %d exclusions)"
msgstr "(%d kända kränkningar av DRC; %d undantag)"
#: pcbnew/dialogs/dialog_plot_base.cpp:447
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:281
msgid "Select Fab Layers"
msgstr "Välj Fab Layers"
#: pcbnew/dialogs/dialog_plot_base.cpp:451
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:284
msgid "Select all Copper Layers"
msgstr "Välj alla kopparlager"
#: pcbnew/dialogs/dialog_plot_base.cpp:455
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:287
msgid "Deselect all Copper Layers"
msgstr "Avmarkera alla kopparlager"
#: pcbnew/dialogs/dialog_plot_base.cpp:459
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:290
msgid "Select all Layers"
msgstr "Välj alla lager"
#: pcbnew/dialogs/dialog_plot_base.cpp:463
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:293
msgid "Deselect all Layers"
msgstr "Avmarkera alla lager"
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions.cpp:55
msgid "Trace gap must be greater than 0."
msgstr "Isolationsavståndet mellan ledarna måste vara större än 0."
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions.cpp:65
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions.cpp:66
#: pcbnew/router/pns_kicad_iface.cpp:634 pcbnew/router/pns_kicad_iface.cpp:707
#: pcbnew/router/pns_kicad_iface.cpp:708
msgid "user choice"
msgstr "användarval"
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:32
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:43
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:58
msgid "u"
msgstr "g"
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:36
msgid "Trace gap:"
msgstr "Isolationsavstånd ledare:"
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:47
msgid "Via gap:"
msgstr "Viors isolationsavstånd:"
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:67
msgid "Via gap same as trace gap"
msgstr "Isolationsavstånd för via samma som för ledare"
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.h:60
msgid "Differential Pair Dimensions"
msgstr "Mått för differentiellt par"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings.cpp:81
msgid "Single Track Length Tuning"
msgstr "Längdjustering av en ledare"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings.cpp:87
msgid "Differential Pair Length Tuning"
msgstr "Differentialpar längdinställning"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings.cpp:93
msgid "Differential Pair Skew Tuning"
msgstr "Längdmatchning av differentiellt par"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings.cpp:95
msgid "Target skew:"
msgstr "Snedvridning:"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:22
msgid "Length / Skew"
msgstr "Längd / skev"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:30
msgid "Tune from:"
msgstr "Ställa in från:"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:46
msgid "Tune to:"
msgstr "Ställ in:"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:62
msgid "Constraint:"
msgstr "Begränsning:"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:68
msgid "From Design Rules"
msgstr "Från designregler"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:80
msgid "Target length:"
msgstr "Mållängd:"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:98
msgid "Meandering"
msgstr "Slingrande"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:109
msgid "Min amplitude (Amin):"
msgstr "Min amplitud (Amin):"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:120
msgid "Max amplitude (Amax):"
msgstr "Max amplitud (Amax):"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:131
msgid "Min spacing (s):"
msgstr "Minsta avstånd:"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:136
msgid ""
"Minimum spacing between adjacent meander segments. The resulting spacing may "
"be greater based on design rules."
msgstr ""
"Minsta utrymme mellan intilliggande meanderslingor. Det slutliga utrymmet "
"kan bli större beroende på designregler."
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:144
msgid "Miter style:"
msgstr "Geringsstil:"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:148
msgid "45 degree"
msgstr "45 grader"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:148
msgid "arc"
msgstr "båge"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:160
msgid "Single-sided"
msgstr "Enkelsidig"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:166
msgid "Miter radius (r):"
msgstr "Geringsradie (r):"
#: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.h:76
msgid "Trace Length Tuning"
msgstr "Ledarlängdsjustering"
#: pcbnew/dialogs/dialog_pns_settings.cpp:34
msgid "DRC violation: highlight obstacles"
msgstr "DRC-överträdelse: markera hinder"
#: pcbnew/dialogs/dialog_pns_settings.cpp:35
msgid "DRC violation: shove tracks and vias"
msgstr "DRC-överträdelse: knuffa ledare och vior"
#: pcbnew/dialogs/dialog_pns_settings.cpp:36
msgid "DRC violation: walk around obstacles"
msgstr "DRC-överträdelse: gå runt hinder"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:19
msgid "Highlight collisions"
msgstr "Markera kollisioner"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:19
msgid "Shove"
msgstr "Knuffa"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:19
msgid "Walk around"
msgstr "Gå runt"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:21
msgid "Mode"
msgstr "Läge"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:28
msgid "Free angle mode (no shove/walkaround)"
msgstr "Fri vinkelläge (inget tryck / genomgång)"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:31
msgid "Shove vias"
msgstr "Knuffa vior"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:32
msgid ""
"When disabled, vias are treated as un-movable objects and hugged instead of "
"shoved."
msgstr ""
"När inaktiverad, behandlas vior som orörliga föremål och rundas istället för "
"att knuffas."
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:36
msgid "Jump over obstacles"
msgstr "Hoppa över hinder"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:37
msgid ""
"When enabled, the router tries to move colliding traces behind solid "
"obstacles (e.g. pads) instead of \"reflecting\" back the collision"
msgstr ""
"När aktiverad, försöker routern att flytta kolliderande ledare bakom fasta "
"hinder (t.ex. lödytor) istället för att \"reflektera\" tillbaka kollisionen"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:41
msgid "Remove redundant tracks"
msgstr "Ta bort överflödiga ledare"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:42
msgid ""
"Removes loops while routing (e.g. if the new track ensures same connectivity "
"as an already existing one, the old track is removed).\n"
"Loop removal works locally (only between the start and end of the currently "
"routed trace)."
msgstr ""
"Tar bort slingor under ledardragning (t.ex. om den nya ledaren säkerställer "
"samma anslutning som en redan existerande, tas den gamla ledaren bort).\n"
"Slingborttagning fungerar lokalt (endast mellan början och slutet av den för "
"närvarande dragna ledaren)."
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:46
msgid "Optimize pad connections"
msgstr "Optimera lödyteanslutningar"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:47
msgid ""
"When enabled, the router tries to break out pads/vias in a clean way, "
"avoiding acute angles and jagged breakout traces."
msgstr ""
"När aktiverad, försöker routern bryta ut lödytor/vior på ett snyggt sätt och "
"undvika spetsiga vinklar och trappstegsformade ledare."
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:51
msgid "Smooth dragged segments"
msgstr "Släta dragna segment"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:52
msgid ""
"When enabled, the router attempts to merge several jagged segments into a "
"single straight one (dragging mode)."
msgstr ""
"När den är aktiverad försöker routern slå samman flera ojämna segment till "
"en enda rak (dragläge)."
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:56
msgid "Allow DRC violations"
msgstr "Tillåt DRC-kränkningar"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:57
msgid ""
"(Highlight collisions mode only) - allows one to establish a track even if "
"is violating the DRC rules."
msgstr ""
"(Endast i läge markera kollisioner) - tillåter att ledare skapas även om det "
"bryter mot DRC-reglerna."
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:61
msgid "Suggest track finish"
msgstr "Föreslå ledarens avslutning"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:66
msgid "Optimize entire track being dragged"
msgstr "Optimera hela ledaren som dras"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:67
msgid ""
"When enabled, the entire portion of the track that is visible on the screen "
"will be optimized and re-routed when a segment is dragged. When disabled, "
"only the area near the segment being dragged will be optimized."
msgstr ""
"Om aktiverad kommer hela den synliga delen av ledaren kommer optimeras och "
"flyttas om när ett segment dras. Om inaktiverad kommer endast det segment "
"som dras optimeras."
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:71
msgid "Use mouse path to set track posture"
msgstr "Använd musvägen för att ställa in ledarställning"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:72
msgid ""
"When enabled, the posture of tracks will be guided by how the mouse is moved "
"from the starting location"
msgstr ""
"När det är aktiverat styrs ledarens ställning av hur musen flyttas från "
"startplatsen"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:76
msgid "Fix all segments on click"
msgstr "Fixa alla segment vid klick"
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:77
msgid ""
"When enabled, all track segments will be fixed in place up to the cursor "
"location. When disabled, the last segment (closest to the cursor) will "
"remain free and follow the cursor."
msgstr ""
"När det är aktiverat kommer alla ledarsegment att fixeras på plats fram till "
"markörens position. När den är inaktiverad förblir det sista segmentet "
"(närmast markören) fritt och följer markören."
#: pcbnew/dialogs/dialog_pns_settings_base.h:61
msgid "Interactive Router Settings"
msgstr "Inställningar för interaktiv router"
#: pcbnew/dialogs/dialog_position_relative.cpp:162
msgid "Reset to the current distance from the reference position."
msgstr "Återställ till aktuellt avstånd från referenspositionen."
#: pcbnew/dialogs/dialog_position_relative.cpp:163
msgid "Reset to the current angle from the reference position."
msgstr "Återställ till aktuell vinkel från referenspositionen."
#: pcbnew/dialogs/dialog_position_relative.cpp:167
#: pcbnew/dialogs/dialog_position_relative_base.cpp:67
msgid "Offset X:"
msgstr "Offset X:"
#: pcbnew/dialogs/dialog_position_relative.cpp:168
#: pcbnew/dialogs/dialog_position_relative_base.cpp:84
msgid "Offset Y:"
msgstr "Offset Y:"
#: pcbnew/dialogs/dialog_position_relative.cpp:170
msgid "Reset to the current X offset from the reference position."
msgstr "Återställ till aktuell X-förskjutning från referenspositionen."
#: pcbnew/dialogs/dialog_position_relative.cpp:171
msgid "Reset to the current Y offset from the reference position."
msgstr "Återställ till aktuell Y-förskjutning från referenspositionen."
#: pcbnew/dialogs/dialog_position_relative.cpp:229
msgid "Reference location: grid origin"
msgstr "Referensplats: rutnätets origo"
#: pcbnew/dialogs/dialog_position_relative.cpp:233
msgid "Reference location: local coordinates origin"
msgstr "Referensplats: origo för lokala koordinater"
#: pcbnew/dialogs/dialog_position_relative.cpp:239
msgid "<none selected>"
msgstr "<ingen vald>"
#: pcbnew/dialogs/dialog_position_relative.cpp:244
#, c-format
msgid "Reference item: %s"
msgstr "Referensobjekt: %s"
#: pcbnew/dialogs/dialog_position_relative_base.cpp:22
msgid "Reference item: <none selected>"
msgstr "Referensobjekt: <ingen vald>"
#: pcbnew/dialogs/dialog_position_relative_base.cpp:35
msgid "Use Local Origin"
msgstr "Använd lokalt origo"
#: pcbnew/dialogs/dialog_position_relative_base.cpp:38
msgid "Use Grid Origin"
msgstr "Använd rutnäts-origo"
#: pcbnew/dialogs/dialog_position_relative_base.cpp:41
msgid "Select Item..."
msgstr "Välj föremål..."
#: pcbnew/dialogs/dialog_position_relative_base.cpp:42
msgid ""
"Click and select a board item.\n"
"The anchor position will be the position of the selected item."
msgstr ""
"Klicka och välj ett kortobjekt.\n"
"Ankarpositionen kommer att vara positionen för det valda objektet."
#: pcbnew/dialogs/dialog_position_relative_base.h:73
msgid "Position Relative To Reference Item"
msgstr "Position i förhållande till referensobjekt"
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:116
msgid "Right-click for layer selection commands."
msgstr "Högerklicka för lagervalskommandon."
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:205
msgid "Print according to objects tab of appearance manager"
msgstr "Skriv ut enligt objektfliken i utseendeshanteraren"
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:233
msgid "No drill mark"
msgstr "Inget borrmärke"
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:234
msgid "Small mark"
msgstr "Litet märke"
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:235
msgid "Real drill"
msgstr "Verklig borr"
#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:21
msgid "Select Manufacturer"
msgstr "Välj tillverkare"
#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:25
#, c-format
msgid "from %s"
msgstr "från %s"
#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:29
#, c-format
msgid "Details: %s"
msgstr "Detaljer: %s"
#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:33
msgid "Send project directly"
msgstr "Skicka projekt direkt"
#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:37
msgid "Sends production files to manufacturer from KiCad"
msgstr "Skickar produktionsfiler från KiCad till tillverkare"
#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:41
msgid "Produce PCB"
msgstr "Tillverka mönsterkort"
#: pcbnew/dialogs/dialog_produce_pcb_base.h:44
msgid "Send PCB for production"
msgstr "Skicka mönsterkort för tillverkning"
#: pcbnew/dialogs/dialog_push_pad_properties.cpp:49
msgid "Change Pads on Current Footprint"
msgstr "Ändra lödytor i aktuellt fotavtryck"
#: pcbnew/dialogs/dialog_push_pad_properties.cpp:50
msgid "Change Pads on Identical Footprints"
msgstr "Byt kuddar på identiska fotavtryck"
#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:25
msgid "Do not modify pads having a different shape"
msgstr "Ändra inte lödytor med annan form"
#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:28
msgid "Do not modify pads having different layers"
msgstr "Ändra inte lödytor med andra lager"
#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:31
msgid "Do not modify pads having a different orientation"
msgstr "Ändra inte lödytor med en annan riktning"
#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:34
msgid "Do not modify pads having a different type"
msgstr "Ändra inte lödytor av en annan typ"
#: pcbnew/dialogs/dialog_push_pad_properties_base.h:51
msgid "Push Pad Properties"
msgstr "Använd lödyteegenskaper"
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:115
msgid "Convert to Rule Area"
msgstr "Konvertera till regelområde"
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:218
msgid "No layers selected."
msgstr "Inget lager valt."
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:25
msgid "Layers:"
msgstr "Lager:"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:44
msgid "Area name:"
msgstr "Områdets namn:"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:46
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:54
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:131
msgid "A unique name for this rule area for use in DRC rules"
msgstr "Ett unikt namn för detta regelområde för användning i DRC-regler"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:69
msgid "Basic rules:"
msgstr "Grundläggande regler:"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:73
msgid "Keep out tracks"
msgstr "Spärrzon för ledare"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:74
msgid "Prevent tracks from routing into this area"
msgstr "Förhindra att ledare dras i detta område"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:78
msgid "Keep out vias"
msgstr "Spärrzon för vior"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:79
msgid "Prevent vias from being placed in this area"
msgstr "Förhindra att vior placeras i detta område"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:83
msgid "Keep out pads"
msgstr "Spärrzon för lödytor"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:84
msgid "Raise a DRC error if a pad overlaps this area"
msgstr "Visa ett DRC-fel om en lödyta överlappar detta område"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:88
msgid "Keep out copper fill"
msgstr "Spärrzon för kopparfyllning"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:89
msgid "Zones will not fill copper into this area"
msgstr "Zoner fyller inte med koppar i detta område"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:93
msgid "Keep out footprints"
msgstr "Spärrzon för fotavtryck"
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:94
msgid "Raise a DRC error if a footprint courtyard overlaps this area"
msgstr "Visa ett DRC-fel om ett fotavtrycks gårdsplan överlappar detta område"
#: pcbnew/dialogs/dialog_rule_area_properties_base.h:70
msgid "Rule Area Properties"
msgstr "Regelområdesegenskaper"
#: pcbnew/dialogs/dialog_swap_layers.cpp:49
msgid "Move items on:"
msgstr "Flytta objekt på:"
#: pcbnew/dialogs/dialog_swap_layers.cpp:50
msgid "To layer:"
msgstr "Till lager:"
#: pcbnew/dialogs/dialog_swap_layers_base.h:48
msgid "Swap Layers"
msgstr "Byt lager"
#: pcbnew/dialogs/dialog_target_properties.cpp:109
msgid "Modified alignment target"
msgstr "Ändrat inriktningsmål"
#: pcbnew/dialogs/dialog_target_properties_base.cpp:50
msgid "Shape:"
msgstr "Form:"
#: pcbnew/dialogs/dialog_target_properties_base.cpp:54
msgid "+"
msgstr "+"
#: pcbnew/dialogs/dialog_target_properties_base.cpp:54
msgid "X"
msgstr "X"
#: pcbnew/dialogs/dialog_target_properties_base.h:54
msgid "Target Properties"
msgstr "Målegenskaper"
#: pcbnew/dialogs/dialog_text_properties.cpp:84
msgid "Footprint Reference Properties"
msgstr "Egenskaper för fotavtrycks referensbeteckning"
#: pcbnew/dialogs/dialog_text_properties.cpp:85
msgid "Footprint Value Properties"
msgstr "Egenskaper för fotavtrycks värde"
#: pcbnew/dialogs/dialog_text_properties.cpp:86
msgid "Footprint Text Properties"
msgstr "Egenskaper för textavtryck"
#: pcbnew/dialogs/dialog_text_properties.cpp:91
msgid "Reference:"
msgstr "Referens:"
#: pcbnew/dialogs/dialog_text_properties.cpp:246
#, c-format
msgid "Footprint %s (%s), %s, rotated %.1f deg"
msgstr "Fotavtryck %s (%s), %s, roterad %.1f grader"
#: pcbnew/dialogs/dialog_text_properties.cpp:446
msgid "Change text properties"
msgstr "Ändra textegenskaper"
#: pcbnew/dialogs/dialog_text_properties_base.cpp:59
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:59
msgid "Enter the text placed on selected layer."
msgstr "Ange texten i det valda lagret."
#: pcbnew/dialogs/dialog_text_properties_base.cpp:100 pcbnew/pcb_text.cpp:345
msgid "Knockout"
msgstr "Urtag"
#: pcbnew/dialogs/dialog_text_properties_base.cpp:104
msgid "Keep text upright"
msgstr "Håll texten upprätt"
#: pcbnew/dialogs/dialog_text_properties_base.cpp:252
msgid "Parent footprint description"
msgstr "Beskrivning av moderns fotavtryck"
#: pcbnew/dialogs/dialog_textbox_properties.cpp:411
msgid "Change text box properties"
msgstr "Ändra egenskaper för textruta"
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:137
msgid "Text Width:"
msgstr "Textbredd:"
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:153
msgid "Text Height:"
msgstr "Texthöjd:"
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:203
msgid "Border style:"
msgstr "Kantstil:"
#: pcbnew/dialogs/dialog_track_via_properties.cpp:456
#, c-format
msgid "Changing the net will also update %s pad %s to %s."
msgstr "Om du byter nät uppdateras %s pad %s till %s."
#: pcbnew/dialogs/dialog_track_via_properties.cpp:465
#, c-format
msgid "Changing the net will also update %s pad %s and %s pad %s to %s."
msgstr "Om du byter nät uppdateras %s pad %s och %s pad %s till %s."
#: pcbnew/dialogs/dialog_track_via_properties.cpp:474
#, c-format
msgid "Changing the net will also update %lu connected pads to %s."
msgstr "Om du byter nät uppdateras %lu anslutna lödytor till %s."
#: pcbnew/dialogs/dialog_track_via_properties.cpp:480
msgid "Change Nets"
msgstr "Byt nät"
#: pcbnew/dialogs/dialog_track_via_properties.cpp:480
msgid "Leave Nets Unchanged"
msgstr "Lämna nät oförändrade"
#: pcbnew/dialogs/dialog_track_via_properties.cpp:501
#: pcbnew/dialogs/dialog_track_via_size.cpp:59
msgid "Via hole size must be smaller than via diameter"
msgstr "Viahålsstorleken måste vara mindre än via-diametern"
#: pcbnew/dialogs/dialog_track_via_properties.cpp:510
msgid "Via start layer and end layer cannot be the same"
msgstr "Via startlager och slutlager kan inte vara desamma"
#: pcbnew/dialogs/dialog_track_via_properties.cpp:670
msgid "Edit track/via properties"
msgstr "Ändra ledare-/via-egenskaper"
#: pcbnew/dialogs/dialog_track_via_properties.cpp:735
msgid "Updating nets"
msgstr "Uppdaterar nät"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:35
msgid "Automatically update via nets"
msgstr "Uppdatera automatiskt nät för via"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:36
msgid ""
"Automatically change the net of this via when the pads or zones it touches "
"are changed"
msgstr ""
"Ändra automatiskt nätet för detta via när lödytorna eller zonerna det rör "
"vid byts ut"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:60
msgid "Start point X:"
msgstr "Startpunkt X:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:71
msgid "Start point Y:"
msgstr "Startpunkt Y:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:82
msgid "End point X:"
msgstr "Slutpunkt X:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:93
msgid "End point Y:"
msgstr "Slutpunkt Y:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:104
msgid "Pre-defined widths:"
msgstr "Fördefinierade bredder:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:131
msgid "Use net class widths"
msgstr "Använd nätklassbredder"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:192
msgid "Pre-defined sizes:"
msgstr "Fördefinierade storlekar:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:205
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:36
msgid "Via diameter:"
msgstr "Via-diameter:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:216
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:47
msgid "Via hole:"
msgstr "Via-hål:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:230
msgid "Use net class sizes"
msgstr "Använd nätklasstorlekar"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:251
msgid "Via type:"
msgstr "Via typ:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:255
#: pcbnew/pcb_track.cpp:1225
msgid "Through"
msgstr "Genom"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:255
#: pcbnew/pcb_track.cpp:1227
msgid "Micro"
msgstr "Mikro"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:255
#: pcbnew/pcb_track.cpp:1226
msgid "Blind/buried"
msgstr "Blind / begravd"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:263
msgid "Start layer:"
msgstr "Startlager:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:270
msgid "End layer:"
msgstr "Slutlager:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:280
msgid "Annular rings:"
msgstr "Kragar:"
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:284
msgid "Start, end, and connected layers"
msgstr "Början, slut och anslutna lager"
#: pcbnew/dialogs/dialog_track_via_properties_base.h:114
msgid "Track & Via Properties"
msgstr "Ledar- & Via-egenskaper"
#: pcbnew/dialogs/dialog_track_via_size_base.h:53
msgid "Track and Via Dimensions"
msgstr "Fördefinierade ledar- och viadimensioner"
#: pcbnew/dialogs/dialog_unused_pad_layers.cpp:150
msgid "Set Unused Pad Properties"
msgstr "Ställ in oanvända lödyteegenskaper"
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:38
msgid "&Remove unused layers"
msgstr "&Ta bort oanvända lager"
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:38
msgid "Res&tore unused layers"
msgstr "Å&terställ oanvända lager"
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:44
msgid "&Selection only"
msgstr "& Endast val"
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:47
msgid "Keep &outside layers"
msgstr "Behåll yttre lager"
#: pcbnew/dialogs/dialog_unused_pad_layers_base.h:60
msgid "Remove Unused Pads"
msgstr "Ta bort oanvända lödytor"
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:32
msgid "Delete footprints with no symbols"
msgstr "Ta bort fotavtryck utan symboler"
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:33
msgid ""
"Remove from the board unlocked footprints which are not linked to a "
"schematic symbol."
msgstr ""
"Ta bort olåsta fotavtryck från mönsterkortet som inte är länkade till en "
"kretsschemasymbol."
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:37
msgid "Replace footprints with those specified in the schematic"
msgstr "Byt ut fotavtryck mot de som anges i schemat"
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:39
msgid ""
"Normally footprints on the board should be changed to match footprint "
"assignment changes made in the schematic. Uncheck this only if you don't "
"want to change existing footprints on the board."
msgstr ""
"Normalt bör fotavtryck på tavlan ändras så att de överensstämmer med "
"ändringar av tilldelningen av fotavtryck i schemat. Avmarkera endast detta "
"om du inte vill ändra befintliga fotavtryck på tavlan."
#: pcbnew/dialogs/dialog_update_pcb_base.h:53
msgid "Update PCB from Schematic"
msgstr "Uppdatera mönsterkort från kretsschema"
#: pcbnew/dialogs/panel_display_options_base.cpp:37
#: pcbnew/dialogs/panel_display_options_base.cpp:55
msgid "Do not show"
msgstr "Visa inte"
#: pcbnew/dialogs/panel_display_options_base.cpp:37
msgid "Show on pads"
msgstr "Visa på lödytor"
#: pcbnew/dialogs/panel_display_options_base.cpp:37
msgid "Show on tracks"
msgstr "Visa på ledare"
#: pcbnew/dialogs/panel_display_options_base.cpp:37
msgid "Show on pads and tracks"
msgstr "Visa på lödytor och ledare"
#: pcbnew/dialogs/panel_display_options_base.cpp:39
msgid "Net Names"
msgstr "Nätnamn"
#: pcbnew/dialogs/panel_display_options_base.cpp:41
msgid "Show or hide net names on pads and/or tracks."
msgstr "Visa eller dölj nätnamn på lödytor och / eller ledare."
#: pcbnew/dialogs/panel_display_options_base.cpp:45
#: pcbnew/tools/pcb_actions.cpp:922
msgid "Show pad numbers"
msgstr "Visa lödytenummer"
#: pcbnew/dialogs/panel_display_options_base.cpp:53
msgid "Clearance Outlines"
msgstr "Clearance konturer"
#: pcbnew/dialogs/panel_display_options_base.cpp:55
msgid "Show when routing"
msgstr "Visa när du drar ledare"
#: pcbnew/dialogs/panel_display_options_base.cpp:55
msgid "Show when routing w/ via clearance at end"
msgstr "Visa under ledardragning med utrymme för via i slutet"
#: pcbnew/dialogs/panel_display_options_base.cpp:55
msgid "Show when routing and editing"
msgstr "Visa när du skapar och redigerar ledare"
#: pcbnew/dialogs/panel_display_options_base.cpp:55
msgid "Show always"
msgstr "Visa alltid"
#: pcbnew/dialogs/panel_display_options_base.cpp:57
msgid "Track && Via Clearances"
msgstr "Ledar- && via-avstånd"
#: pcbnew/dialogs/panel_display_options_base.cpp:59
msgid ""
"Show clearance outlines around tracks, and optionally the via clearance "
"around the end of the track while routing."
msgstr ""
"Visa isolationsavstånd som kontur kring ledare, och (om så önskas) "
"isolationsavstånd för via som kontur kring ledarens ända under ledardragning."
#: pcbnew/dialogs/panel_display_options_base.cpp:63
msgid "Show pad clearance"
msgstr "Visa vadderingsavstånd"
#: pcbnew/dialogs/panel_display_options_base.cpp:72
msgid "Highlight footprints when symbols selected"
msgstr "Framhäv fotavtryck när symboler väljs"
#: pcbnew/dialogs/panel_display_options_base.cpp:74
msgid "Highlight footprints corresponding to selected symbols"
msgstr "Framhäv fotavtryck som motsvarar valda symboler"
#: pcbnew/dialogs/panel_display_options_base.cpp:80
msgid "Ensures that cross-probed footprints are visible in the current view"
msgstr "Säkerställer att korsprobade fotavtryck är synliga i den aktuella vyn"
#: pcbnew/dialogs/panel_display_options_base.cpp:90
msgid "Highlight nets when they are highlighted in the schematic editor"
msgstr "Markera nät när de är markerade i kretsschemaredigerare"
#: pcbnew/dialogs/panel_display_options_base.cpp:94
msgid "Refresh 3D view automatically"
msgstr "Uppdatera 3D-vy automatiskt"
#: pcbnew/dialogs/panel_display_options_base.cpp:95
msgid ""
"When enabled, edits to the board will cause the 3D view to refresh (may be "
"slow with larger boards)"
msgstr ""
"Om aktiverad kommer förändringar på kortet uppdatera 3D-vyn (kan bli "
"långsamt med större kort)"
#: pcbnew/dialogs/panel_edit_options_base.cpp:28
msgid "Flip board items L/R (default is T/B)"
msgstr "Vänd mönsterkortsobjekt Höger/Vänster (standard är Ovan/Under)"
#: pcbnew/dialogs/panel_edit_options_base.cpp:31
msgid "Allow free pads"
msgstr "Tillåt fria lödytor"
#: pcbnew/dialogs/panel_edit_options_base.cpp:32
msgid ""
"If checked, pads can be moved with respect to the rest of the footprint."
msgstr ""
"Om ikryssad kan pads flyttas i förhållande till resten av dess footprint."
#: pcbnew/dialogs/panel_edit_options_base.cpp:45
msgid "Constrain actions to H, V, 45 degrees"
msgstr "Begränsa åtgärder till H, V och 45 grader"
#: pcbnew/dialogs/panel_edit_options_base.cpp:51
msgid "Step for &rotate commands:"
msgstr "Steg för kommandot &rotera:"
#: pcbnew/dialogs/panel_edit_options_base.cpp:56
msgid "Set increment (in degrees) for context menu and hotkey rotation."
msgstr "Ställ in steg (i grader) för snabbmenyn och snabbtangentrotation."
#: pcbnew/dialogs/panel_edit_options_base.cpp:74
msgid "Arc editing mode:"
msgstr "Bågredigeringsläge:"
#: pcbnew/dialogs/panel_edit_options_base.cpp:78
msgid "Keep center, adjust radius"
msgstr "Behåll centrum, justera radie"
#: pcbnew/dialogs/panel_edit_options_base.cpp:78
msgid "Keep endpoints or direction of starting point"
msgstr "Behåll ändpunkter eller riktning för startpunkt"
#: pcbnew/dialogs/panel_edit_options_base.cpp:109
#: pcbnew/dialogs/panel_edit_options_base.cpp:181
msgid "No modifier"
msgstr "Ingen modifierare"
#: pcbnew/dialogs/panel_edit_options_base.cpp:114
#: pcbnew/dialogs/panel_edit_options_base.cpp:186
msgid "Select item(s)."
msgstr "Välj objekt."
#: pcbnew/dialogs/panel_edit_options_base.cpp:153
#: pcbnew/dialogs/panel_edit_options_base.cpp:225
msgid "Toggle selection."
msgstr "Växla markeringstillstånd."
#: pcbnew/dialogs/panel_edit_options_base.cpp:153
#: pcbnew/dialogs/panel_edit_options_base.cpp:225
msgid "Highlight net (for pads or tracks)."
msgstr "Markera nät (för lödytor eller ledare)."
#: pcbnew/dialogs/panel_edit_options_base.cpp:257
#: pcbnew/dialogs/panel_edit_options_base.cpp:280
msgid "Magnetic Points"
msgstr "Magnetiska punkter"
#: pcbnew/dialogs/panel_edit_options_base.cpp:259
msgid "Magnetic pads"
msgstr "Magnetiska lödytor"
#: pcbnew/dialogs/panel_edit_options_base.cpp:263
msgid "Magnetic graphics"
msgstr "Magnetisk grafik"
#: pcbnew/dialogs/panel_edit_options_base.cpp:287
msgid "Snap to pads:"
msgstr "Fäst till lödytor:"
#: pcbnew/dialogs/panel_edit_options_base.cpp:289
#: pcbnew/dialogs/panel_edit_options_base.cpp:297
msgid "Capture cursor when the mouse enters a pad area"
msgstr "Fånga markören när musen kommer in i en lödyta"
#: pcbnew/dialogs/panel_edit_options_base.cpp:293
#: pcbnew/dialogs/panel_edit_options_base.cpp:307
msgid "When creating tracks"
msgstr "När du skapar ledare"
#: pcbnew/dialogs/panel_edit_options_base.cpp:301
msgid "Snap to tracks:"
msgstr "Fäst till ledare:"
#: pcbnew/dialogs/panel_edit_options_base.cpp:303
#: pcbnew/dialogs/panel_edit_options_base.cpp:311
msgid "Capture cursor when the mouse approaches a track"
msgstr "Fånga markören när musen närmar sig en ledare"
#: pcbnew/dialogs/panel_edit_options_base.cpp:315
msgid "Snap to graphics:"
msgstr "Fäst till grafik:"
#: pcbnew/dialogs/panel_edit_options_base.cpp:317
#: pcbnew/dialogs/panel_edit_options_base.cpp:325
msgid "Capture cursor when the mouse approaches graphical control points"
msgstr "Fånga markören när musen närmar sig grafiska kontrollpunkter"
#: pcbnew/dialogs/panel_edit_options_base.cpp:338
msgid "Always show selected ratsnest"
msgstr "Visa alltid valda nätlinjer"
#: pcbnew/dialogs/panel_edit_options_base.cpp:341
#: pcbnew/tools/pcb_actions.cpp:881
msgid "Show ratsnest with curved lines"
msgstr "Visa nätlinjer med bågformade linjer"
#: pcbnew/dialogs/panel_edit_options_base.cpp:348
msgid "Track Editing"
msgstr "Ledarredigering"
#: pcbnew/dialogs/panel_edit_options_base.cpp:350
msgid "Mouse drag track behavior:"
msgstr "Musens beteende vid dragning av ledare:"
#: pcbnew/dialogs/panel_edit_options_base.cpp:352
msgid ""
"Choose the action to perform when dragging a track segment with the mouse"
msgstr "Välj den åtgärd som ska utföras när du drar ett ledarsegment med musen"
#: pcbnew/dialogs/panel_edit_options_base.cpp:360
msgid "Moves the track segment without moving connected tracks"
msgstr "Flyttar ledarsegmentet utan att flytta anslutna ledare"
#: pcbnew/dialogs/panel_edit_options_base.cpp:364
#: pcbnew/tools/pcb_actions.cpp:1546
msgid "Drag (45 degree mode)"
msgstr "Dra (45 graders läge)"
#: pcbnew/dialogs/panel_edit_options_base.cpp:365
#: pcbnew/tools/pcb_actions.cpp:1547
msgid "Drags the track segment while keeping connected tracks at 45 degrees."
msgstr "Drar ledarsegmentet medan anslutna ledare behålls i 45 grader."
#: pcbnew/dialogs/panel_edit_options_base.cpp:369
#: pcbnew/tools/pcb_actions.cpp:1553
msgid "Drag (free angle)"
msgstr "Dra (fri vinkel)"
#: pcbnew/dialogs/panel_edit_options_base.cpp:370
#: pcbnew/tools/pcb_actions.cpp:1554
msgid ""
"Drags the nearest joint in the track without restricting the track angle."
msgstr "Dra den närmaste fogen i ledaren utan att begränsa ledarvinkeln."
#: pcbnew/dialogs/panel_edit_options_base.cpp:389
msgid "Draw an outline to show the sheet size."
msgstr "Rita en kontur för att visa bladstorlek."
#: pcbnew/dialogs/panel_edit_options_base.cpp:393
msgid "Show courtyard collisions when moving/dragging"
msgstr "Visa kollisioner mellan gårdsplaner under pågående flytta / dra"
#: pcbnew/dialogs/panel_edit_options_base.cpp:397
msgid "Auto-refill zones"
msgstr "Återfyll zoner automatiskt"
#: pcbnew/dialogs/panel_edit_options_base.cpp:399
msgid "If checked, zones will be re-filled after each edit operation"
msgstr ""
"Om ikryssad kommer kopparzoner att återfyllas efter varje redigeringsåtgärd"
#: pcbnew/dialogs/panel_fp_editor_color_settings.cpp:115
msgid "Internal Layers"
msgstr "Inre kopparlager"
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:336
msgid ""
"Text will not be readable with a thickness greater than\n"
"1/4 its width or height."
msgstr ""
"Text kan inte läsas med en tjocklek som är större än\n"
"1/4 dess bredd eller höjd."
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:23
msgid "Default text items for new footprints:"
msgstr "Standardtextobjekt för nya fotavtryck:"
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:85
msgid ""
"Note: a blank reference designator or value will use the footprint name."
msgstr ""
"Obs: En tom referensbeteckning eller ett tomt värde kommer att använda "
"fotavtryckets namn."
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:102
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:21
msgid "Default properties for new graphic items:"
msgstr "Standardegenskaper för nya grafiska objekt:"
#: pcbnew/dialogs/panel_fp_lib_table.cpp:296
msgid "Options Editor..."
msgstr "Alternativredigerare ..."
#: pcbnew/dialogs/panel_fp_lib_table.cpp:296
msgid "Edit options"
msgstr "Redigera alternativ"
#: pcbnew/dialogs/panel_fp_lib_table.cpp:569
#, c-format
msgid "Illegal character '%c' in nickname '%s'."
msgstr "Olaglig karaktär '%c' i smeknamn '%s'."
#: pcbnew/dialogs/panel_fp_lib_table.cpp:813
#, c-format
msgid "Select %s Library"
msgstr "Välj %s Bibliotek"
#: pcbnew/dialogs/panel_fp_lib_table.cpp:871
msgid "The following directories could not be opened: \n"
msgstr "Följande kataloger kunde inte öppnas: \n"
#: pcbnew/dialogs/panel_fp_lib_table.cpp:876
msgid "Failed to open directories to look for libraries"
msgstr "Det gick inte att öppna kataloger för att leta efter bibliotek"
#: pcbnew/dialogs/panel_fp_lib_table.cpp:904
msgid "Warning: Duplicate Nicknames"
msgstr "Varning: Dubblett smeknamn"
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:100
#, fuzzy
msgid "LIbrary Format"
msgstr "Biblioteksformat"
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:167
msgid "Path Substitutions"
msgstr "Substitut för Sökvägar"
#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:388
msgid "No filename entered"
msgstr "Inget filnamn inmatat"
#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:393
msgid "Illegal filename"
msgstr "Ogiltigt filnamn"
#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:398
#: pcbnew/microwave/microwave_polygon.cpp:224
msgid "File not found"
msgstr "Filen hittades inte"
#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:403
msgid "Unable to open file"
msgstr "Öppning av fil misslyckades"
#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:408
msgid "Unknown error"
msgstr "Okänt fel"
#: pcbnew/dialogs/panel_fp_properties_3d_model_base.cpp:35
msgid "3D Model(s)"
msgstr "3D-modell (er)"
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:36
msgid "Icon"
msgstr "Ikon"
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:37
msgid "Show button"
msgstr "Visa knappar"
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:39
msgid "Category"
msgstr "Kategori"
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:76
#: pcbnew/tools/pcb_actions.cpp:621
msgid "Open Plugin Directory"
msgstr "Öppna Plugin Directory"
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:81
msgid "Reload Plugins"
msgstr "Ladda om insticksmoduler"
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:86
msgid "Show Plugin Errors"
msgstr "Visa plugin-fel"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:23
msgid "Page origin"
msgstr "Sidans origo"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:25
msgid "Display Origin"
msgstr "Visnings-origo"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:27
msgid "Select which origin is used for X,Y coordinate display."
msgstr "Välj vilket origo som ska användas för X-, Y-koordinatvisning."
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:31
msgid "Increases right"
msgstr "Ökar rätt"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:31
msgid "Increases left"
msgstr "Ökar till vänster"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:33
msgid "X Axis"
msgstr "X-axel"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:35
msgid "Select which the direction on the screen in which the X axis increases."
msgstr "Välj vilken riktning på skärmen där X-axeln ökar."
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:39
msgid "Increases up"
msgstr "Ökar upp"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:39
msgid "Increases down"
msgstr "Ökar ner"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:41
msgid "Y Axis"
msgstr "Y-axeln"
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:43
msgid "Select which the direction on the screen in which the Y axis increases."
msgstr "Välj vilken riktning på skärmen där Y-axeln ökar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:46
msgid "Minimum clearance:"
msgstr "Minsta isolationsavstånd:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:51
msgid ""
"The minimum clearance between copper items which do not belong to the same "
"net. If set, this is an absolute minimum which cannot be reduced by "
"netclasses, custom rules, or other settings."
msgstr ""
"Minsta isolationsavstånd mellan kopparelement som inte hör till samma nät. "
"Om angivet är detta ett absolut minimum som inte kan underskridas av "
"nätklasser, anpassade regler, eller andra inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:62
msgid "Minimum track width:"
msgstr "Minsta ledarbredd:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:67
msgid ""
"The minimum track width. If set, this is an absolute minimum and cannot be "
"reduced by netclasses, custom rules, or other settings."
msgstr ""
"Minsta ledarbredd. Om angiven är detta ett absolut minimum som inte kan "
"underskridas av nätklasser, anpassade regler, eller andra inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:79
msgid "Minimum connection width:"
msgstr "Minsta anslutningsbredd:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:84
msgid "The minimum copper width of connected copper items."
msgstr "Minsta kopparbredd för anslutna kopparobjekt."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:96
msgid "Minimum annular width:"
msgstr "Minsta kragbredd:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:101
msgid ""
"The minimum annular ring width. If set, this is an absolute minimum and "
"cannot be reduced by netclasses, custom rules, or other settings."
msgstr ""
"Minsta bredd för årsringar. Om angiven är detta ett absolut minimum som inte "
"kan underskridas av nätklasser, anpassade regler, eller andra inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:112
msgid "Minimum via diameter:"
msgstr "Minsta viadiameter:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:117
msgid ""
"The minimum via diameter. If set, this is an absolute minimum and cannot be "
"reduced by netclasses, custom rules, or other settings."
msgstr ""
"Minsta via-diameter. Om angiven är detta ett absolut minimum som inte kan "
"underskridas av nätklasser, anpassade regler, eller andra inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:128
msgid "Copper to hole clearance:"
msgstr "Frigång koppar till hål:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:133
msgid ""
"The minimum clearance between a hole and an unassociated copper item. If "
"set, this is an absolute minimum and cannot be reduced by custom rules or "
"other settings."
msgstr ""
"Minsta frigång mellan ett hål och ett oförknippat kopparelement. Om angivet "
"är detta ett absolut minimum som inte kan underskridas av anpassade regler "
"eller andra inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:144
msgid "Copper to edge clearance:"
msgstr "Frigång koppar till ytterkontur:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:149
msgid ""
"The minimum clearance between the board edge and any copper item. If set, "
"this is an absolute minimum and cannot be reduced by custom rules or other "
"settings."
msgstr ""
"Minsta frigång mellan mönsterkortets kant och kopparelement. Om angivet är "
"detta ett absolut minimum som inte kan underskridas av anpassade regler "
"eller andra inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:169
msgid "Holes"
msgstr "Hål"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:185
msgid "Minimum through hole:"
msgstr "Minsta genomgående hål:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:190
msgid ""
"The minimum through-hole size. If set, this is an absolute minimum and "
"cannot be reduced by netclasses, custom rules or other settings."
msgstr ""
"Minsta diameter för genomgående hål. Om angiven är detta ett absolut minimum "
"som inte kan underskridas av nätklasser, anpassade regler eller andra "
"inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:201
msgid "Hole to hole clearance:"
msgstr "Hål till hål:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:206
msgid ""
"The minimum clearance between two drilled holes. If set, this is an "
"absolute minimum and cannot be reduced by custom rules or other settings. "
"(Note: does not apply to milled holes.)"
msgstr ""
"Minsta frigång mellan två borrade hål. Om angivet är detta ett absolut "
"minimum som inte kan underskridas av anpassade regler eller andra "
"inställningar. (Obs: detta gäller inte frästa hål.)"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:226
msgid "uVias"
msgstr "uVior"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:242
msgid "Minimum uVia diameter:"
msgstr "Minsta µVia-diameter:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:247
msgid ""
"The minimum diameter for micro-vias. If set, this is an absolute minimum "
"and cannot be reduced by netclasses, custom rules, or other settings."
msgstr ""
"Minsta diameter för mikrovior. Om angiven är denna ett absolut minimum som "
"inte kan underskridas av nätklasser, anpassade regler, eller andra "
"inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:258
msgid "Minimum uVia hole:"
msgstr "Minsta uVia-hål:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:263
msgid ""
"The minimum micro-via hole size. If set, this is an absolute minimum and "
"cannot be reduced by netclasses, custom rules, or other settings."
msgstr ""
"Minsta storlek för micro-vior. Om angiven är detta ett absolut minimum som "
"inte kan underskridas av nätklasser, anpassade regler eller andra "
"inställningar."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:283
msgid "Silkscreen"
msgstr "Anvisningstryck"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:299
msgid "Minimum item clearance:"
msgstr "Minsta frigång mellan objekt:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:304
msgid ""
"Minimum clearance between two items on the same silkscreen layer. If set "
"this can improve legibility. (Note: does not apply to multiple shapes "
"within a single footprint.)"
msgstr ""
"Minsta avstånd mellan två element på samma lager för anvisningstryck. Om "
"angiven kan tydligheten förbättras. (Obs: Detta gäller inte för former i "
"samma fotavtryck.)"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:315
msgid "Minimum text height:"
msgstr "Minsta texthöjd:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:329
msgid "Minimum text thickness:"
msgstr "Minsta texttjocklek:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:355
msgid "Arc/circle approximated by segments"
msgstr "Båge / cirkel approximerad av segment"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:368
msgid "Max allowed deviation:"
msgstr "Maximalt tillåten avvikelse:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:370
msgid ""
"This is the maximum distance between a circle and the polygonal shape that "
"approximate it.\n"
"The error max defines the number of segments of this polygon."
msgstr ""
"Detta är det maximala avståndet mellan en cirkel och den polygonala formen "
"som approximerar den.\n"
"Felet max definierar antalet segment av denna polygon."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:375
msgid ""
"The maximum allowed deviation between a true arc or circle and segments used "
"to approximate it. Smaller values produce smoother graphics at the expense "
"of performance."
msgstr ""
"Den största tillåtna avvikelsen mellan en sann båge och segmenten som "
"approximerar den. Små värden ger mjukare grafik på bekostnad av prestanda."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:386
#, c-format
msgid "Note: zone filling can be slow when < %s."
msgstr "Obs: zonfyllning kan vara långsam när <%s."
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:398
msgid "Zone fill strategy"
msgstr "Zonfyllningsstrategi"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:408
msgid "Allow fillets outside zone outline"
msgstr "Tillåt rundning utanför zonerna"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:420
msgid "Min thermal relief spoke count:"
msgstr "Minsta antal ekrar för termisk avlastning:"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:439
msgid "Length tuning"
msgstr "Längdjustering"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:443
msgid "Include stackup height in track length calculations"
msgstr "Räkna in lageruppbyggnadens höjd i ledarlängdsuträkningar"
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:444
msgid ""
"When enabled, the distance between copper layers will be included in track "
"length calculations for tracks with vias. When disabled, via stackup height "
"is ignored."
msgstr ""
"Aktiverad: avståndet mellan kopparlagren kommer räknas in i "
"ledarlängdsuträkningar för ledare med vior. Deaktiverad: lageruppbyggnadens "
"höjd ignoreras."
#: pcbnew/dialogs/panel_setup_layers.cpp:432
msgid "Use the Physical Stackup page to change the number of copper layers."
msgstr "Använd sidan Fysisk lageruppbyggnad för att ändra antalet kopparskikt."
#: pcbnew/dialogs/panel_setup_layers.cpp:466
#, c-format
msgid ""
"Footprints have some items on removed layers:\n"
"%s\n"
"These items will be no longer accessible\n"
"Do you wish to continue?"
msgstr ""
"Fotavtryck innehåller några objekt på borttagna lager:\n"
"%s\n"
"Dessa objekt kommer inte längre att vara tillgängliga\n"
"Vill du fortsätta?"
#: pcbnew/dialogs/panel_setup_layers.cpp:476
msgid ""
"Items have been found on removed layers. This operation will delete all "
"items from removed layers and cannot be undone.\n"
"Do you wish to continue?"
msgstr ""
"Objekt har hittats i borttagna lager. Den här åtgärden tar bort alla objekt "
"från borttagna lager och kan inte ångras.\n"
"Vill du fortsätta?"
#: pcbnew/dialogs/panel_setup_layers.cpp:671
msgid "Layer must have a name."
msgstr "Skiktet måste ha ett namn."
#: pcbnew/dialogs/panel_setup_layers.cpp:677
#, c-format
msgid "%s are forbidden in layer names."
msgstr "\"%s\" är förbjudna i lagernamn."
#: pcbnew/dialogs/panel_setup_layers.cpp:684
msgid "Layer name \"signal\" is reserved."
msgstr "Skiktnamnet \"signal\" är reserverat."
#: pcbnew/dialogs/panel_setup_layers.cpp:692
#, c-format
msgid "Layer name '%s' already in use."
msgstr "Lagernamnet \"%s\" används redan."
#: pcbnew/dialogs/panel_setup_layers.cpp:792
#, c-format
msgid ""
"Imported settings have fewer copper layers than the current board (%i "
"instead of %i).\n"
"\n"
"Continue and delete the extra inner copper layers from the current board?"
msgstr ""
"Importerade inställningar har färre kopparskikt än det nuvarande kortet (%i "
"istället för %i).\n"
"\n"
"Fortsätta och ta bort de extra inre kopparskikten från det aktuella kortet?"
#: pcbnew/dialogs/panel_setup_layers.cpp:799
msgid "Inner Layers To Be Deleted"
msgstr "Inre lager som ska raderas"
#: pcbnew/dialogs/panel_setup_layers.cpp:834
msgid "All user-defined layers have already been added."
msgstr "Alla användar-definierade lager har redan lagts till."
#: pcbnew/dialogs/panel_setup_layers.cpp:838
msgid "Add User-defined Layer"
msgstr "Lägg till användardefinierat lager"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:26
msgid "Add User Defined Layer..."
msgstr "Lägg till användardefinierat lager..."
#: pcbnew/dialogs/panel_setup_layers_base.cpp:46
msgid "CrtYd_Front"
msgstr "CrtYd_Front"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:51
#: pcbnew/dialogs/panel_setup_layers_base.cpp:639
msgid "Off-board, testing"
msgstr "Ej på mönsterkortet, testning"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:58
msgid "If you want a fabrication layer for the front side of the board"
msgstr "Om du vill ha ett fabrikationslager på framsidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:62
msgid "Fab_Front"
msgstr "Fab_Front"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:65
#: pcbnew/dialogs/panel_setup_layers_base.cpp:629
msgid "Off-board, manufacturing"
msgstr "Ej på mönsterkortet, tillverkning"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:70
msgid "If you want an adhesive template for the front side of the board"
msgstr "Om du vill ha en mall för lim på mönsterkortets framsida"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:74
msgid "Adhes_Front"
msgstr "Adhes_Front"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:77
#: pcbnew/dialogs/panel_setup_layers_base.cpp:89
#: pcbnew/dialogs/panel_setup_layers_base.cpp:101
#: pcbnew/dialogs/panel_setup_layers_base.cpp:113
#: pcbnew/dialogs/panel_setup_layers_base.cpp:581
#: pcbnew/dialogs/panel_setup_layers_base.cpp:593
#: pcbnew/dialogs/panel_setup_layers_base.cpp:605
#: pcbnew/dialogs/panel_setup_layers_base.cpp:617
msgid "On-board, non-copper"
msgstr "På mönsterkortet, icke-koppar"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:82
msgid "If you want a solder paste layer for front side of the board"
msgstr "Om du vill ha ett lager för lodpasta för mönsterkortets framsida"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:86
msgid "SoldP_Front"
msgstr "SåldP_Front"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:94
msgid "If you want a silk screen layer for the front side of the board"
msgstr ""
"Om du vill ha ett lager för anvisningstryck på framsidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:98
msgid "SilkS_Front"
msgstr "SilkS_Front"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:106
msgid "If you want a solder mask layer for the front of the board"
msgstr "Om du vill ha ett lager för lödmask på framsidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:110
msgid "Mask_Front"
msgstr "Mask_Fram"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:118
msgid "If you want a front copper layer"
msgstr "Om du vill ha ett främre kopparskikt"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:122
msgid "Front_layer"
msgstr "Främre lager"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:123
msgid "Layer name of front (top) copper layer"
msgstr "Skiktnamn på främre (översta) kopparskiktet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:127
#: pcbnew/dialogs/panel_setup_layers_base.cpp:141
#: pcbnew/dialogs/panel_setup_layers_base.cpp:155
#: pcbnew/dialogs/panel_setup_layers_base.cpp:169
#: pcbnew/dialogs/panel_setup_layers_base.cpp:183
#: pcbnew/dialogs/panel_setup_layers_base.cpp:197
#: pcbnew/dialogs/panel_setup_layers_base.cpp:211
#: pcbnew/dialogs/panel_setup_layers_base.cpp:225
#: pcbnew/dialogs/panel_setup_layers_base.cpp:239
#: pcbnew/dialogs/panel_setup_layers_base.cpp:253
#: pcbnew/dialogs/panel_setup_layers_base.cpp:267
#: pcbnew/dialogs/panel_setup_layers_base.cpp:281
#: pcbnew/dialogs/panel_setup_layers_base.cpp:295
#: pcbnew/dialogs/panel_setup_layers_base.cpp:309
#: pcbnew/dialogs/panel_setup_layers_base.cpp:323
#: pcbnew/dialogs/panel_setup_layers_base.cpp:337
#: pcbnew/dialogs/panel_setup_layers_base.cpp:351
#: pcbnew/dialogs/panel_setup_layers_base.cpp:365
#: pcbnew/dialogs/panel_setup_layers_base.cpp:379
#: pcbnew/dialogs/panel_setup_layers_base.cpp:393
#: pcbnew/dialogs/panel_setup_layers_base.cpp:407
#: pcbnew/dialogs/panel_setup_layers_base.cpp:421
#: pcbnew/dialogs/panel_setup_layers_base.cpp:435
#: pcbnew/dialogs/panel_setup_layers_base.cpp:449
#: pcbnew/dialogs/panel_setup_layers_base.cpp:463
#: pcbnew/dialogs/panel_setup_layers_base.cpp:477
#: pcbnew/dialogs/panel_setup_layers_base.cpp:491
#: pcbnew/dialogs/panel_setup_layers_base.cpp:505
#: pcbnew/dialogs/panel_setup_layers_base.cpp:519
#: pcbnew/dialogs/panel_setup_layers_base.cpp:533
#: pcbnew/dialogs/panel_setup_layers_base.cpp:547
#: pcbnew/dialogs/panel_setup_layers_base.cpp:565
msgid "signal"
msgstr "signal"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:127
#: pcbnew/dialogs/panel_setup_layers_base.cpp:141
#: pcbnew/dialogs/panel_setup_layers_base.cpp:155
#: pcbnew/dialogs/panel_setup_layers_base.cpp:169
#: pcbnew/dialogs/panel_setup_layers_base.cpp:183
#: pcbnew/dialogs/panel_setup_layers_base.cpp:197
#: pcbnew/dialogs/panel_setup_layers_base.cpp:211
#: pcbnew/dialogs/panel_setup_layers_base.cpp:225
#: pcbnew/dialogs/panel_setup_layers_base.cpp:239
#: pcbnew/dialogs/panel_setup_layers_base.cpp:253
#: pcbnew/dialogs/panel_setup_layers_base.cpp:267
#: pcbnew/dialogs/panel_setup_layers_base.cpp:281
#: pcbnew/dialogs/panel_setup_layers_base.cpp:295
#: pcbnew/dialogs/panel_setup_layers_base.cpp:309
#: pcbnew/dialogs/panel_setup_layers_base.cpp:323
#: pcbnew/dialogs/panel_setup_layers_base.cpp:337
#: pcbnew/dialogs/panel_setup_layers_base.cpp:351
#: pcbnew/dialogs/panel_setup_layers_base.cpp:365
#: pcbnew/dialogs/panel_setup_layers_base.cpp:379
#: pcbnew/dialogs/panel_setup_layers_base.cpp:393
#: pcbnew/dialogs/panel_setup_layers_base.cpp:407
#: pcbnew/dialogs/panel_setup_layers_base.cpp:421
#: pcbnew/dialogs/panel_setup_layers_base.cpp:435
#: pcbnew/dialogs/panel_setup_layers_base.cpp:449
#: pcbnew/dialogs/panel_setup_layers_base.cpp:463
#: pcbnew/dialogs/panel_setup_layers_base.cpp:477
#: pcbnew/dialogs/panel_setup_layers_base.cpp:491
#: pcbnew/dialogs/panel_setup_layers_base.cpp:505
#: pcbnew/dialogs/panel_setup_layers_base.cpp:519
#: pcbnew/dialogs/panel_setup_layers_base.cpp:533
#: pcbnew/dialogs/panel_setup_layers_base.cpp:547
#: pcbnew/dialogs/panel_setup_layers_base.cpp:565
msgid "power plane"
msgstr "kraftplan"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:127
#: pcbnew/dialogs/panel_setup_layers_base.cpp:141
#: pcbnew/dialogs/panel_setup_layers_base.cpp:155
#: pcbnew/dialogs/panel_setup_layers_base.cpp:169
#: pcbnew/dialogs/panel_setup_layers_base.cpp:183
#: pcbnew/dialogs/panel_setup_layers_base.cpp:197
#: pcbnew/dialogs/panel_setup_layers_base.cpp:211
#: pcbnew/dialogs/panel_setup_layers_base.cpp:225
#: pcbnew/dialogs/panel_setup_layers_base.cpp:239
#: pcbnew/dialogs/panel_setup_layers_base.cpp:253
#: pcbnew/dialogs/panel_setup_layers_base.cpp:267
#: pcbnew/dialogs/panel_setup_layers_base.cpp:281
#: pcbnew/dialogs/panel_setup_layers_base.cpp:295
#: pcbnew/dialogs/panel_setup_layers_base.cpp:309
#: pcbnew/dialogs/panel_setup_layers_base.cpp:323
#: pcbnew/dialogs/panel_setup_layers_base.cpp:337
#: pcbnew/dialogs/panel_setup_layers_base.cpp:351
#: pcbnew/dialogs/panel_setup_layers_base.cpp:365
#: pcbnew/dialogs/panel_setup_layers_base.cpp:379
#: pcbnew/dialogs/panel_setup_layers_base.cpp:393
#: pcbnew/dialogs/panel_setup_layers_base.cpp:407
#: pcbnew/dialogs/panel_setup_layers_base.cpp:421
#: pcbnew/dialogs/panel_setup_layers_base.cpp:435
#: pcbnew/dialogs/panel_setup_layers_base.cpp:449
#: pcbnew/dialogs/panel_setup_layers_base.cpp:463
#: pcbnew/dialogs/panel_setup_layers_base.cpp:477
#: pcbnew/dialogs/panel_setup_layers_base.cpp:491
#: pcbnew/dialogs/panel_setup_layers_base.cpp:505
#: pcbnew/dialogs/panel_setup_layers_base.cpp:519
#: pcbnew/dialogs/panel_setup_layers_base.cpp:533
#: pcbnew/dialogs/panel_setup_layers_base.cpp:547
#: pcbnew/dialogs/panel_setup_layers_base.cpp:565
msgid "mixed"
msgstr "blandad"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:127
#: pcbnew/dialogs/panel_setup_layers_base.cpp:141
#: pcbnew/dialogs/panel_setup_layers_base.cpp:155
#: pcbnew/dialogs/panel_setup_layers_base.cpp:169
#: pcbnew/dialogs/panel_setup_layers_base.cpp:183
#: pcbnew/dialogs/panel_setup_layers_base.cpp:197
#: pcbnew/dialogs/panel_setup_layers_base.cpp:211
#: pcbnew/dialogs/panel_setup_layers_base.cpp:225
#: pcbnew/dialogs/panel_setup_layers_base.cpp:239
#: pcbnew/dialogs/panel_setup_layers_base.cpp:253
#: pcbnew/dialogs/panel_setup_layers_base.cpp:267
#: pcbnew/dialogs/panel_setup_layers_base.cpp:281
#: pcbnew/dialogs/panel_setup_layers_base.cpp:295
#: pcbnew/dialogs/panel_setup_layers_base.cpp:309
#: pcbnew/dialogs/panel_setup_layers_base.cpp:323
#: pcbnew/dialogs/panel_setup_layers_base.cpp:337
#: pcbnew/dialogs/panel_setup_layers_base.cpp:351
#: pcbnew/dialogs/panel_setup_layers_base.cpp:365
#: pcbnew/dialogs/panel_setup_layers_base.cpp:379
#: pcbnew/dialogs/panel_setup_layers_base.cpp:393
#: pcbnew/dialogs/panel_setup_layers_base.cpp:407
#: pcbnew/dialogs/panel_setup_layers_base.cpp:421
#: pcbnew/dialogs/panel_setup_layers_base.cpp:435
#: pcbnew/dialogs/panel_setup_layers_base.cpp:449
#: pcbnew/dialogs/panel_setup_layers_base.cpp:463
#: pcbnew/dialogs/panel_setup_layers_base.cpp:477
#: pcbnew/dialogs/panel_setup_layers_base.cpp:491
#: pcbnew/dialogs/panel_setup_layers_base.cpp:505
#: pcbnew/dialogs/panel_setup_layers_base.cpp:519
#: pcbnew/dialogs/panel_setup_layers_base.cpp:533
#: pcbnew/dialogs/panel_setup_layers_base.cpp:547
#: pcbnew/dialogs/panel_setup_layers_base.cpp:565
msgid "jumper"
msgstr "hoppare"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:131
#: pcbnew/dialogs/panel_setup_layers_base.cpp:145
#: pcbnew/dialogs/panel_setup_layers_base.cpp:159
#: pcbnew/dialogs/panel_setup_layers_base.cpp:173
#: pcbnew/dialogs/panel_setup_layers_base.cpp:187
#: pcbnew/dialogs/panel_setup_layers_base.cpp:201
#: pcbnew/dialogs/panel_setup_layers_base.cpp:215
#: pcbnew/dialogs/panel_setup_layers_base.cpp:229
#: pcbnew/dialogs/panel_setup_layers_base.cpp:243
#: pcbnew/dialogs/panel_setup_layers_base.cpp:257
#: pcbnew/dialogs/panel_setup_layers_base.cpp:271
#: pcbnew/dialogs/panel_setup_layers_base.cpp:285
#: pcbnew/dialogs/panel_setup_layers_base.cpp:299
#: pcbnew/dialogs/panel_setup_layers_base.cpp:313
#: pcbnew/dialogs/panel_setup_layers_base.cpp:327
#: pcbnew/dialogs/panel_setup_layers_base.cpp:341
#: pcbnew/dialogs/panel_setup_layers_base.cpp:355
#: pcbnew/dialogs/panel_setup_layers_base.cpp:369
#: pcbnew/dialogs/panel_setup_layers_base.cpp:383
#: pcbnew/dialogs/panel_setup_layers_base.cpp:397
#: pcbnew/dialogs/panel_setup_layers_base.cpp:411
#: pcbnew/dialogs/panel_setup_layers_base.cpp:425
#: pcbnew/dialogs/panel_setup_layers_base.cpp:439
#: pcbnew/dialogs/panel_setup_layers_base.cpp:453
#: pcbnew/dialogs/panel_setup_layers_base.cpp:467
#: pcbnew/dialogs/panel_setup_layers_base.cpp:481
#: pcbnew/dialogs/panel_setup_layers_base.cpp:495
#: pcbnew/dialogs/panel_setup_layers_base.cpp:509
#: pcbnew/dialogs/panel_setup_layers_base.cpp:523
#: pcbnew/dialogs/panel_setup_layers_base.cpp:537
#: pcbnew/dialogs/panel_setup_layers_base.cpp:551
#: pcbnew/dialogs/panel_setup_layers_base.cpp:569
msgid ""
"Copper layer type for Freerouter and other external routers.\n"
"Power plane layers are removed from Freerouter's layer menus."
msgstr ""
"Kopparlagertyp för Freerouter och andra externa routrar.\n"
"Kraftplanskikt tas bort från Freerouters lagermenyer."
#: pcbnew/dialogs/panel_setup_layers_base.cpp:138
msgid "In1"
msgstr "I 1"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:152
msgid "In2"
msgstr "In2"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:166
msgid "In3"
msgstr "In3"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:180
msgid "In4"
msgstr "In4"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:194
msgid "In5"
msgstr "In5"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:208
msgid "In6"
msgstr "In6"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:222
msgid "In7"
msgstr "In7"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:236
msgid "In8"
msgstr "In8"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:250
msgid "In9"
msgstr "In9"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:264
msgid "In10"
msgstr "In10"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:278
msgid "In11"
msgstr "In11"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:292
msgid "In12"
msgstr "In12"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:306
msgid "In13"
msgstr "In13"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:320
msgid "In14"
msgstr "År 14"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:334
msgid "In15"
msgstr "In15"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:348
msgid "In16"
msgstr "In16"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:362
msgid "In17"
msgstr "17"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:376
msgid "In18"
msgstr "År 18"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:390
msgid "In19"
msgstr "År 19"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:404
msgid "In20"
msgstr "In20"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:418
msgid "In21"
msgstr "In21"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:432
msgid "In22"
msgstr "In22"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:446
msgid "In23"
msgstr "In23"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:460
msgid "In24"
msgstr "In24"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:474
msgid "In25"
msgstr "In25"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:488
msgid "In26"
msgstr "In26"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:502
msgid "In27"
msgstr "In27"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:516
msgid "In28"
msgstr "In28"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:530
msgid "In29"
msgstr "In29"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:544
msgid "In30"
msgstr "In30"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:556
msgid "If you want a back copper layer"
msgstr "Om du vill ha ett bakre kopparskikt"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:561
msgid "Layer name of back (bottom) copper layer"
msgstr "Skiktnamn på bakre (nedre) kopparskiktet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:574
msgid "If you want a solder mask layer for the back side of the board"
msgstr "Om du vill ha ett lager för lödmask på baksidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:578
msgid "SoldM_Back"
msgstr "SåldM_Back"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:586
msgid "If you want a silk screen layer for the back side of the board"
msgstr ""
"Om du vill ha ett lager för anvisningstryck på baksidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:590
msgid "SilkS_Back"
msgstr "SilkS_Bak"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:598
msgid "If you want a solder paste layer for the back side of the board"
msgstr "Om du vill ha ett lager för lodpasta på baksidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:602
msgid "SoldP_Back"
msgstr "SåldP_Back"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:610
msgid "If you want an adhesive layer for the back side of the board"
msgstr "Om du vill ha ett lager för lim på baksidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:614
msgid "Adhes_Back"
msgstr "Adhes_Bak"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:622
msgid "If you want a fabrication layer for the back side of the board"
msgstr "Om du vill ha ett lager för tillverkning på baksidan av mönsterkortet"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:626
msgid "Fab_Back"
msgstr "Fab_Bak"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:636
msgid "CrtYd_Back"
msgstr "CrtYd_Back"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:646
msgid "Pcb_Edges"
msgstr "Pcb_Edges"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:649
msgid "Board contour"
msgstr "Mönsterkortets kantkontur"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:656
msgid "Margin"
msgstr "Marginal"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:659
msgid "Edge_Cuts setback"
msgstr "Edge_Cuts bakslag"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:666
msgid "Eco1"
msgstr "Eco1"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:669
#: pcbnew/dialogs/panel_setup_layers_base.cpp:679
#: pcbnew/dialogs/panel_setup_layers_base.cpp:691
#: pcbnew/dialogs/panel_setup_layers_base.cpp:703
msgid "Auxiliary"
msgstr "Extra"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:676
msgid "Eco2"
msgstr "Eco2"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:684
msgid "If you want a separate layer for comments or notes"
msgstr "Om du vill ha ett separat lager för kommentarer eller anteckningar"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:688
msgid "Comments"
msgstr "Kommentarer"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:696
msgid "If you want a layer for documentation drawings"
msgstr "Om du vill ha ett lager för dokumentationsritningar"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:700
msgid "Drawings"
msgstr "Ritningar"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:710
msgid "User1"
msgstr "Användare1"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:713
#: pcbnew/dialogs/panel_setup_layers_base.cpp:723
#: pcbnew/dialogs/panel_setup_layers_base.cpp:733
#: pcbnew/dialogs/panel_setup_layers_base.cpp:743
#: pcbnew/dialogs/panel_setup_layers_base.cpp:753
#: pcbnew/dialogs/panel_setup_layers_base.cpp:763
#: pcbnew/dialogs/panel_setup_layers_base.cpp:773
#: pcbnew/dialogs/panel_setup_layers_base.cpp:783
#: pcbnew/dialogs/panel_setup_layers_base.cpp:793
msgid "User defined layer"
msgstr "Användardefinierat lager"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:720
msgid "User2"
msgstr "Användare2"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:730
msgid "User3"
msgstr "Användare3"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:740
msgid "User4"
msgstr "Användare4"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:750
msgid "User5"
msgstr "Användare5"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:760
msgid "User6"
msgstr "Användare6"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:770
msgid "User7"
msgstr "Användare7"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:780
msgid "User8"
msgstr "Användare8"
#: pcbnew/dialogs/panel_setup_layers_base.cpp:790
msgid "User9"
msgstr "Användare9"
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:32
msgid ""
"Use your board manufacturer's recommendations for solder mask expansion and "
"minimum web width."
msgstr ""
"Använd din mönsterkorttillverkares rekommendationer för lödmaskens frigång "
"och minsta bryggbredd."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:36
msgid "If none are provided, setting the values to zero is suggested."
msgstr "Om inga är tillhandahållna kan värdena sättas till noll."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:56
msgid ""
"Global clearance between pads and the solder mask.\n"
"This value can be superseded by local values for a footprint or a pad."
msgstr ""
"Globalt värde för frigång mellan lödytor och lödmasken.\n"
"Detta värde kan ersättas av lokalt definierade värden för ett fotavtryck "
"eller en lödyta."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:61
msgid ""
"Positive clearance means area bigger than the pad (usual for solder mask "
"clearance)."
msgstr ""
"Positivt värde för frigång ger en öppning som är större än lödytan (vanligt "
"för lödmaskens frigång)."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:69
msgid "Solder mask minimum web width:"
msgstr "Lödmaskens minsta bryggbredd:"
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:71
msgid ""
"Min. dist between 2 pad areas.\n"
"Two pad areas nearer than this value will be merged during plotting.\n"
"This parameter is only used to plot solder mask layers.\n"
"Leave at 0 unless you know what you are doing."
msgstr ""
"Min. distans mellan två lödytors lödmasköppningar.\n"
"Två lödytors lödmasköppningar som är närmare varandra än detta värde slås "
"samman under plottning.\n"
"Den här parametern används bara för att plotta lödmasklager.\n"
"Lämna 0 om du inte vet vad du gör."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:76
msgid ""
"Minimum distance between openings in the solder mask. Pad openings closer "
"than this distance will be plotted as a single opening."
msgstr ""
"Minsta avstånd mellan öppningar i lödmasken. Öppningar närmare varandra än "
"detta avstånd kommer att plottas som en enda öppning."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:84
msgid "Solder mask to copper clearance:"
msgstr "Marginal mellan lödmask och koppar:"
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:95
msgid "Allow bridged solder mask apertures between pads within footprints"
msgstr "Tillåt överbryggade lödmasköppningar mellan lödytor i fotavtryck"
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:98
msgid "Tent vias"
msgstr "Täck vior"
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:103
msgid ""
"Global clearance between pads and the solder paste.\n"
"This value can be superseded by local values for a footprint or a pad.\n"
"Final clearance value is the sum of this value and the clearance value ratio."
msgstr ""
"Global absolut marginal mellan lödytor och lodpasta.\n"
"Detta värde kan ersättas av individuella lokala värden för ett fotavtryck "
"eller en lödyta.\n"
"Slutligt marginal är summan av detta värde och den relativa marginalen."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:108
msgid ""
"Negative clearance means area smaller than the pad (usual for solder paste "
"clearance)."
msgstr ""
"Negativt avstånd ger en yta som är mindre än lödytan (vanligt för marginal "
"för lodpasta)."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:118
msgid ""
"Global clearance ratio in percent between pads and the solder paste.\n"
"A value of 10 means the clearance value is 10 percent of the pad size.\n"
"This value can be superseded by local values for a footprint or a pad.\n"
"Final clearance value is the sum of this value and the clearance value."
msgstr ""
"Globalt relativt marginalförhållande i procent mellan lödyta och lodpasta.\n"
"Ett värde på 10 betyder att marginalen är 10 procent av lödytans storlek.\n"
"Detta värde kan ersättas av individuella lokala värden för ett fotavtryck "
"eller en lödyta.\n"
"Slutlig marginal är summan av detta värde och det absoluta marginalvärdet."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:123
msgid "Additional clearance as a percentage of the pad size."
msgstr "Ytterligare marginal som en procentsats av lödytans storlek."
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:134
msgid ""
"Note: Solder paste clearances (absolute and relative) are added to determine "
"the final clearance."
msgstr ""
"Anmärkning: Lodpastemarginaler (absolut och relativ) adderas för att "
"bestämma den slutliga marginalen."
#: pcbnew/dialogs/panel_setup_rules.cpp:93
msgid "Cancel Changes?"
msgstr "Vill du förkasta ändringarna?"
#: pcbnew/dialogs/panel_setup_rules.cpp:539
msgid "DRC rules"
msgstr "DRC regler"
#: pcbnew/dialogs/panel_setup_rules.cpp:546
#: pcbnew/drc/drc_rule_condition.cpp:64
msgid "ERROR:"
msgstr "FEL:"
#: pcbnew/dialogs/panel_setup_rules.cpp:609
msgid "Design rules cannot be added without a project"
msgstr "Designregler kan inte läggas till utan ett projekt"
#: pcbnew/dialogs/panel_setup_rules_base.cpp:26
msgid "DRC rules:"
msgstr "DRC-regler:"
#: pcbnew/dialogs/panel_setup_rules_base.cpp:78
msgid "Check rule syntax"
msgstr "Kontrollera regelsyntax"
#: pcbnew/dialogs/panel_setup_rules_help_md.h:2
msgid ""
"### Top-level Clauses\n"
"\n"
" (version <number>)\n"
"\n"
" (rule <rule_name> <rule_clause> ...)\n"
"\n"
"\n"
"<br>\n"
"\n"
"### Rule Clauses\n"
"\n"
" (constraint <constraint_type> ...)\n"
"\n"
" (condition \"<expression>\")\n"
"\n"
" (layer \"<layer_name>\")\n"
"\n"
" (severity <severity_name>)\n"
"\n"
"\n"
"<br>\n"
"\n"
"### Constraint Types\n"
"\n"
" * annular\\_width\n"
" * assertion\n"
" * clearance\n"
" * connection\\_width\n"
" * courtyard_clearance\n"
" * diff\\_pair\\_gap\n"
" * diff\\_pair\\_uncoupled\n"
" * disallow\n"
" * edge\\_clearance\n"
" * length\n"
" * hole\\_clearance\n"
" * hole\\_size\n"
" * min\\_resolved\\_spokes\n"
" * physical\\_clearance\n"
" * physical\\_hole\\_clearance\n"
" * silk\\_clearance\n"
" * skew\n"
" * text\\_height\n"
" * text\\_thickness\n"
" * thermal\\_relief\\_gap\n"
" * thermal\\_spoke\\_width\n"
" * track\\_width\n"
" * via\\_count\n"
" * via\\_diameter\n"
" * zone\\_connection\n"
"\n"
"Note: `clearance` and `hole_clearance` rules are not run against items of "
"the same net; `physical_clearance` and `physical_hole_clearance` rules are.\n"
"<br><br>\n"
"\n"
"### Items\n"
"\n"
" * `A` _the first (or only) item under test_\n"
" * `B` _the second item under test (for binary tests)_\n"
" * `L` _the layer currently under test_\n"
"\n"
"<br>\n"
"\n"
"### Item Types\n"
"\n"
" * buried\\_via\n"
" * graphic\n"
" * hole\n"
" * micro\\_via\n"
" * pad\n"
" * text\n"
" * track\n"
" * via\n"
" * zone\n"
"\n"
"<br>\n"
"\n"
"### Zone Connections\n"
"\n"
" * solid\n"
" * thermal\\_reliefs\n"
" * none\n"
"\n"
"<br>\n"
"\n"
"### Severity Names\n"
"\n"
" * warning\n"
" * error\n"
" * exclusion\n"
" * ignore\n"
"\n"
"<br>\n"
"\n"
"### Examples\n"
"\n"
" (version 1)\n"
"\n"
" (rule HV\n"
" (constraint clearance (min 1.5mm))\n"
" (condition \"A.NetClass == 'HV'\"))\n"
"\n"
"\n"
" (rule HV\n"
" (layer outer)\n"
" (constraint clearance (min 1.5mm))\n"
" (condition \"A.NetClass == 'HV'\"))\n"
"\n"
"\n"
" (rule HV_HV\n"
" # wider clearance between HV tracks\n"
" (constraint clearance (min \"1.5mm + 2.0mm\"))\n"
" (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n"
"\n"
"\n"
" (rule HV_unshielded\n"
" (constraint clearance (min 2mm))\n"
" (condition \"A.NetClass == 'HV' && !A.enclosedByArea('Shield*')\"))\n"
"\n"
"\n"
" (rule heavy_thermals\n"
" (constraint thermal_spoke_width (min 0.5mm))\n"
" (condition \"A.NetClass == 'HV'\"))\n"
"<br><br>\n"
"\n"
"### Notes\n"
"\n"
"Version clause must be the first clause. It indicates the syntax version of "
"the file so that \n"
"future rules parsers can perform automatic updates. It should be\n"
"set to \"1\".\n"
"\n"
"Rules should be ordered by specificity. Later rules take\n"
"precedence over earlier rules; once a matching rule is found\n"
"no further rules will be checked.\n"
"\n"
"Use Ctrl+/ to comment or uncomment line(s).\n"
"<br><br><br>\n"
"\n"
"### Expression functions\n"
"\n"
"All function parameters support simple wildcards (`*` and `?`).\n"
"<br><br>\n"
"\n"
" A.intersectsCourtyard('<footprint_refdes>')\n"
"True if any part of `A` lies within the given footprint's principal "
"courtyard.\n"
"<br><br>\n"
"\n"
" A.intersectsFrontCourtyard('<footprint_refdes>')\n"
"True if any part of `A` lies within the given footprint's front courtyard.\n"
"<br><br>\n"
"\n"
" A.intersectsBackCourtyard('<footprint_refdes>')\n"
"True if any part of `A` lies within the given footprint's back courtyard.\n"
"<br><br>\n"
"\n"
" A.intersectsArea('<zone_name>')\n"
"True if any part of `A` lies within the given zone's outline.\n"
"<br><br>\n"
"\n"
" A.enclosedByArea('<zone_name>')\n"
"True if all of `A` lies within the given zone's outline. \n"
"\n"
"NB: this is potentially a more expensive call than `intersectsArea()`. Use "
"`intersectsArea()` \n"
"where possible.\n"
"<br><br>\n"
"\n"
" A.isPlated()\n"
"True if `A` has a hole which is plated.\n"
"<br><br>\n"
"\n"
" A.inDiffPair('<net_name>')\n"
"True if `A` has a net that is part of the specified differential pair.\n"
"`<net_name>` is the base name of the differential pair. For example, "
"`inDiffPair('/CLK')`\n"
"matches items in the `/CLK_P` and `/CLK_N` nets.\n"
"<br><br>\n"
"\n"
" AB.isCoupledDiffPair()\n"
"True if `A` and `B` are members of the same diff pair.\n"
"<br><br>\n"
"\n"
" A.memberOf('<group_name>')\n"
"True if `A` is a member of the given group. Includes nested membership.\n"
"<br><br>\n"
"\n"
" A.existsOnLayer('<layer_name>')\n"
"True if `A` exists on the given layer. The layer name can be\n"
"either the name assigned in Board Setup > Board Editor Layers or\n"
"the canonical name (ie: `F.Cu`).\n"
"\n"
"NB: this returns true if `A` is on the given layer, independently\n"
"of whether or not the rule is being evaluated for that layer.\n"
"For the latter use a `(layer \"layer_name\")` clause in the rule.\n"
"<br><br>\n"
"\n"
" !!! A.insideCourtyard('<footprint_refdes>') !!!\n"
"Deprecated; use `intersectsCourtyard()` instead.\n"
"<br><br>\n"
"\n"
" !!! A.insideFrontCourtyard('<footprint_refdes>') !!!\n"
"Deprecated; use `intersectsFrontCourtyard()` instead.\n"
"<br><br>\n"
"\n"
" !!! A.insideBackCourtyard('<footprint_refdes>') !!!\n"
"Deprecated; use `intersectsBackCourtyard()` instead.\n"
"<br><br>\n"
"\n"
" !!! A.insideArea('<zone_name>') !!!\n"
"Deprecated; use `intersectsArea()` instead.\n"
"<br><br><br>\n"
"\n"
"### More Examples\n"
"\n"
" (rule \"copper keepout\"\n"
" (constraint disallow track via zone)\n"
" (condition \"A.intersectsArea('zone3')\"))\n"
"\n"
"\n"
" (rule \"BGA neckdown\"\n"
" (constraint track_width (min 0.2mm) (opt 0.25mm))\n"
" (constraint clearance (min 0.05mm) (opt 0.08mm))\n"
" (condition \"A.intersectsCourtyard('U3')\"))\n"
"\n"
"\n"
" # prevent silk over tented vias\n"
" (rule silk_over_via\n"
" (constraint silk_clearance (min 0.2mm))\n"
" (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n"
"\n"
"\n"
" (rule \"Distance between Vias of Different Nets\"\n"
" (constraint hole_to_hole (min 0.254mm))\n"
" (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B."
"Net\"))\n"
"\n"
" (rule \"Clearance between Pads of Different Nets\"\n"
" (constraint clearance (min 3.0mm))\n"
" (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B."
"Net\"))\n"
"\n"
"\n"
" (rule \"Via Hole to Track Clearance\"\n"
" (constraint hole_clearance (min 0.254mm))\n"
" (condition \"A.Type == 'Via' && B.Type == 'Track'\"))\n"
"\n"
" (rule \"Pad to Track Clearance\"\n"
" (constraint clearance (min 0.2mm))\n"
" (condition \"A.Type == 'Pad' && B.Type == 'Track'\"))\n"
"\n"
"\n"
" (rule \"clearance-to-1mm-cutout\"\n"
" (constraint clearance (min 0.8mm))\n"
" (condition \"A.Layer == 'Edge.Cuts' && A.Thickness == 1.0mm\"))\n"
"\n"
"\n"
" (rule \"Max Drill Hole Size Mechanical\"\n"
" (constraint hole_size (max 6.3mm))\n"
" (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n"
"\n"
" (rule \"Max Drill Hole Size PTH\"\n"
" (constraint hole_size (max 6.35mm))\n"
" (condition \"A.Pad_Type == 'Through-hole'\"))\n"
"\n"
"\n"
" # Specify an optimal gap for a particular diff-pair\n"
" (rule \"dp clock gap\"\n"
" (constraint diff_pair_gap (opt \"0.8mm\"))\n"
" (condition \"A.inDiffPair('/CLK')\"))\n"
"\n"
" # Specify a larger clearance around any diff-pair\n"
" (rule \"dp clearance\"\n"
" (constraint clearance (min \"1.5mm\"))\n"
" (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
"\n"
"\n"
" # Don't use thermal reliefs on heatsink pads\n"
" (rule heat_sink_pad\n"
" (constraint zone_connection solid)\n"
" (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
"\n"
" # Require all four thermal relief spokes to connect to parent zone\n"
" (rule fully_spoked_pads\n"
" (constraint min_resolved_spokes 4))\n"
"\n"
" # Set thermal relief gap & spoke width for all zones\n"
" (rule defined_relief\n"
" (constraint thermal_relief_gap (min 10mil))\n"
" (constraint thermal_spoke_width (min 12mil)))\n"
"\n"
" # Override thermal relief gap & spoke width for GND and PWR zones\n"
" (rule defined_relief_pwr\n"
" (constraint thermal_relief_gap (min 10mil))\n"
" (constraint thermal_spoke_width (min 12mil))\n"
" (condition \"A.Name == 'zone_GND' || A.Name == 'zone_PWR'\"))\n"
"\n"
"\n"
" # Prevent solder wicking from SMD pads\n"
" (rule holes_in_pads\n"
" (constraint physical_hole_clearance (min 0.2mm))\n"
" (condition \"B.Pad_Type == 'SMD'\"))\n"
"\n"
" # Disallow solder mask margin overrides\n"
" (rule \"disallow solder mask margin overrides\"\n"
" (constraint assertion \"A.Soldermask_Margin_Override == 0mm\")\n"
" (condition \"A.Type == 'Pad'\"))\n"
"\n"
"\n"
" # Enforce a mechanical clearance between components and board edge\n"
" (rule front_mechanical_board_edge_clearance\n"
" (layer \"F.Courtyard\")\n"
" (constraint physical_clearance (min 3mm))\n"
" (condition \"B.Layer == 'Edge.Cuts'\"))\n"
"\n"
"\n"
" # Check current-carrying capacity\n"
" (rule high-current\n"
" (constraint track_width (min 1.0mm))\n"
" (constraint connection_width (min 0.8mm))\n"
" (condition \"A.NetClass == 'Power'\"))"
msgstr ""
"### Toppnivåsatser\n"
"\n"
" (version <number>)\n"
"\n"
" (rule <rule_name> <rule_clause> ...)\n"
"\n"
"\n"
"<br>\n"
"\n"
"### Regelsatser\n"
"\n"
" (constraint <constraint_type> ...)\n"
"\n"
" (condition \"<expression>\")\n"
"\n"
" (layer \"<layer_name>\")\n"
"\n"
" (severity <severity_name>)\n"
"\n"
"\n"
"<br>\n"
"\n"
"### Typer av begränsningar\n"
"\n"
" * annular\\_width\n"
" * assertion\n"
" * clearance\n"
" * connection\\_width\n"
" * courtyard_clearance\n"
" * diff\\_pair\\_gap\n"
" * diff\\_pair\\_uncoupled\n"
" * disallow\n"
" * edge\\_clearance\n"
" * length\n"
" * hole\\_clearance\n"
" * hole\\_size\n"
" * min\\_resolved\\_spokes\n"
" * physical\\_clearance\n"
" * physical\\_hole\\_clearance\n"
" * silk\\_clearance\n"
" * skew\n"
" * text\\_height\n"
" * text\\_thickness\n"
" * thermal\\_relief\\_gap\n"
" * thermal\\_spoke\\_width\n"
" * track\\_width\n"
" * via\\_count\n"
" * via\\_diameter\n"
" * zone\\_connection\n"
"\n"
"Notera: regler för `clearance` (frigång, isolationsavstånd) och "
"`hole_clearance` (frigång för hål) körs inte mot objekt i samma nät; det "
"görs däremot med `physical_clearance` (fysisk frigång) och "
"`physical_hole_clearance`(fysisk frigång för hål).\n"
"<br><br>\n"
"\n"
"### Objekt\n"
"\n"
" * `A` _det första (eller enda) objektet som testas_\n"
" * `B` _det andra objektet som testas (för binära test)_\n"
" * `L` _lagret som för närvarande testas_\n"
"\n"
"<br>\n"
"\n"
"### Objekttyper\n"
"\n"
" * buried\\_via\n"
" * graphic\n"
" * hole\n"
" * micro\\_via\n"
" * pad\n"
" * text\n"
" * track\n"
" * via\n"
" * zone\n"
"\n"
"<br>\n"
"\n"
"### Zonanslutningar\n"
"\n"
" * solid\n"
" * thermal\\_reliefs\n"
" * none\n"
"\n"
"<br>\n"
"\n"
"### Namn på allvarlighetsgrad\n"
"\n"
" * warning\n"
" * error\n"
" * exclusion\n"
" * ignore\n"
"\n"
"<br>\n"
"\n"
"### Exempel\n"
"\n"
" (version 1)\n"
"\n"
" (rule HV\n"
" (constraint clearance (min 1.5mm))\n"
" (condition \"A.NetClass == 'HV'\"))\n"
"\n"
"\n"
" (rule HV\n"
" (layer outer)\n"
" (constraint clearance (min 1.5mm))\n"
" (condition \"A.NetClass == 'HV'\"))\n"
"\n"
"\n"
" (rule HV_HV\n"
" # wider clearance between HV tracks\n"
" (constraint clearance (min \"1.5mm + 2.0mm\"))\n"
" (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n"
"\n"
"\n"
" (rule HV_unshielded\n"
" (constraint clearance (min 2mm))\n"
" (condition \"A.NetClass == 'HV' && !A.insideArea('Shield*')\"))\n"
"\n"
"\n"
" (rule heavy_thermals\n"
" (constraint thermal_spoke_width (min 0.5mm))\n"
" (condition \"A.NetClass == 'HV'\"))\n"
"<br><br>\n"
"\n"
"### Notera\n"
"\n"
"Versionssatsen måste vara den första satsen. Den indikerar syntaxversionen "
"för filen så att \n"
"framtida regeltolkare kan göra automatiska uppdateringar. Den skall \n"
"sättas till \"1\".\n"
"\n"
"Regler skall ordnas efter hur specifika de är. Senare regler\n"
"tillämpas med prioritet över föregående regler; så snart en matchande regel "
"hittas\n"
"kollas inga fler regler.\n"
"\n"
"Använd Ctrl+/ för att göra linjer till kommentar eller göra kommentarlinjer "
"till ej kommentar.\n"
"<br><br><br>\n"
"\n"
"### Uttrycksfunktioner (Expression functions)\n"
"\n"
"Alla funktionsparametrar stöder användning av enkla jokertecken (`*` och `?"
"`).\n"
"<br><br>\n"
"\n"
" A.intersectsCourtyard('<footprint_refdes>')\n"
"Sant om någon del av `A` ligger inom det givna fotavtryckets huvudgårdsplan "
"(principal courtyard).\n"
"<br><br>\n"
"\n"
" A.intersectsFrontCourtyard('<footprint_refdes>')\n"
"Sant om någon del av `A` ligger inom det givna fotavtryckets gårdsplan på "
"mönsterkortets framsida.\n"
"<br><br>\n"
"\n"
" A.intersectsBackCourtyard('<footprint_refdes>')\n"
"Sant om någon del av `A` ligger inom det givna fotavtryckets gårdsplan på "
"mönsterkortets baksida.\n"
"<br><br>\n"
"\n"
" A.intersectsArea('<zone_name>')\n"
"Sant om någon del av `A` ligger inom konturen för den givna zonen.\n"
"<br><br>\n"
"\n"
" A.enclosedByArea('<zone_name>')\n"
"Sant om hela `A` ligger inom konturen för den givna zonen. \n"
"\n"
"Notera: Detta är potentiellt en mer beräkningsintensiv kontroll än "
"`intersectsArea()`. Använd `intersectsArea()` \n"
"om möjligt.\n"
"<br><br>\n"
"\n"
" A.isPlated()\n"
"Sant om `A` har ett genompläterat hål.\n"
"<br><br>\n"
"\n"
" A.inDiffPair('<net_name>')\n"
"Sant om `A` tillhör ett nät som är del av det givna differentialparet.\n"
"`<net_name>` är grundnamnet för differentialparet. Till exempel: "
"`inDiffPair('/CLK')`\n"
"matchar objekt i näten `/CLK_P` och `/CLK_N`.\n"
"<br><br>\n"
"\n"
" AB.isCoupledDiffPair()\n"
"Sant om `A` and `B` tillhör samma differentialpar.\n"
"<br><br>\n"
"\n"
" A.memberOf('<group_name>')\n"
"Sant om `A` tillhör den givna gruppen. Inkluderar även gruppmedlemskap genom "
"flera steg (nested membership; tillhör grupp som i sin tur är medlem i "
"grupp).\n"
"<br><br>\n"
"\n"
" A.existsOnLayer('<layer_name>')\n"
"Sant om `A` existerar på det givna lagret. Lagernamnet kan vara\n"
"endera namnet som tilldelats i Mönsterkortsinställningar > Lager i "
"mönsterkortsredigeraren\n"
"eller det kanoniska namnet (dvs.: `F.Cu`).\n"
"\n"
"OBS: detta returnerar sant om `A` är på det givna lagret, oberoende\n"
"av huruvida regeln utvärderas för det lagret.\n"
"För det sistnämnda, använd en sats `(layer \"layer_name\")` i regeln.\n"
"<br><br>\n"
"\n"
" !!! A.insideCourtyard('<footprint_refdes>') !!!\n"
"Föråldrad; använd `intersectsCourtyard()` istället.\n"
"<br><br>\n"
"\n"
" !!! A.insideFrontCourtyard('<footprint_refdes>') !!!\n"
"Föråldrad; använd `intersectsFrontCourtyard()` istället.\n"
"<br><br>\n"
"\n"
" !!! A.insideBackCourtyard('<footprint_refdes>') !!!\n"
"Föråldrad; använd `intersectsBackCourtyard()` istället.\n"
"<br><br>\n"
"\n"
" !!! A.insideArea('<zone_name>') !!!\n"
"Föråldrad; använd `intersectsArea()` istället.\n"
"<br><br><br>\n"
"\n"
"### Fler exempel\n"
"\n"
" (rule \"copper keepout\"\n"
" (constraint disallow track via zone)\n"
" (condition \"A.intersectsArea('zone3')\"))\n"
"\n"
"\n"
" (rule \"BGA neckdown\"\n"
" (constraint track_width (min 0.2mm) (opt 0.25mm))\n"
" (constraint clearance (min 0.05mm) (opt 0.08mm))\n"
" (condition \"A.intersectsCourtyard('U3')\"))\n"
"\n"
"\n"
" # förhindra anvisningstryck på täckta vior\n"
" (rule silk_over_via\n"
" (constraint silk_clearance (min 0.2mm))\n"
" (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n"
"\n"
"\n"
" (rule \"Distance between Vias of Different Nets\"\n"
" (constraint hole_to_hole (min 0.254mm))\n"
" (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B."
"Net\"))\n"
"\n"
" (rule \"Clearance between Pads of Different Nets\"\n"
" (constraint clearance (min 3.0mm))\n"
" (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B."
"Net\"))\n"
"\n"
"\n"
" (rule \"Via Hole to Track Clearance\"\n"
" (constraint hole_clearance (min 0.254mm))\n"
" (condition \"A.Type == 'Via' && B.Type == 'Track'\"))\n"
"\n"
" (rule \"Pad to Track Clearance\"\n"
" (constraint clearance (min 0.2mm))\n"
" (condition \"A.Type == 'Pad' && B.Type == 'Track'\"))\n"
"\n"
"\n"
" (rule \"clearance-to-1mm-cutout\"\n"
" (constraint clearance (min 0.8mm))\n"
" (condition \"A.Layer == 'Edge.Cuts' && A.Thickness == 1.0mm\"))\n"
"\n"
"\n"
" (rule \"Max Drill Hole Size Mechanical\"\n"
" (constraint hole_size (max 6.3mm))\n"
" (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n"
"\n"
" (rule \"Max Drill Hole Size PTH\"\n"
" (constraint hole_size (max 6.35mm))\n"
" (condition \"A.Pad_Type == 'Through-hole'\"))\n"
"\n"
"\n"
" # Specifiera ett optimalt isolationsavstånd för ett specifikt "
"differentialpar\n"
" (rule \"dp clock gap\"\n"
" (constraint diff_pair_gap (opt \"0.8mm\"))\n"
" (condition \"A.inDiffPair('/CLK')\"))\n"
"\n"
" # Specifiera ett större isolationsavstånd runt alla/godtyckligt "
"differentialpar\n"
" (rule \"dp clearance\"\n"
" (constraint clearance (min \"1.5mm\"))\n"
" (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
"\n"
"\n"
" # Använd inte termisk avlastning på lödytor som är kylelement "
"(heatsink)\n"
" (rule heat_sink_pad\n"
" (constraint zone_connection solid)\n"
" (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
"\n"
" # Kräv att alla fyra ekrar i termisk avlastning ansluter till den "
"överordnade zonen; dvs. zonen som lödytan tillhör\n"
" (rule fully_spoked_pads\n"
" (constraint min_resolved_spokes 4))\n"
"\n"
" # Sätt gap och ekerbredd för termisk avlastning i alla zoner\n"
" (rule defined_relief\n"
" (constraint thermal_relief_gap (min 10mil))\n"
" (constraint thermal_spoke_width (min 12mil)))\n"
"\n"
" # Avvikande inställningar för gap och ekerbredd för termisk avlastning i "
"zonerna GND och PWR\n"
" (rule defined_relief_pwr\n"
" (constraint thermal_relief_gap (min 10mil))\n"
" (constraint thermal_spoke_width (min 12mil))\n"
" (condition \"A.Name == 'zone_GND' || A.Name == 'zone_PWR'\"))\n"
"\n"
"\n"
" # Förhindra kapillär sugning av lod från SMD-lödytor\n"
" (rule holes_in_pads\n"
" (constraint physical_hole_clearance (min 0.2mm))\n"
" (condition \"B.Pad_Type == 'SMD'\"))\n"
"\n"
" # Tillåt inte åsidosättande av / lokala avvikelser i (override) "
"inställning för lödmaskmarginal\n"
" (rule \"disallow solder mask margin overrides\"\n"
" (constraint assertion \"A.Soldermask_Margin_Override == 0mm\")\n"
" (condition \"A.Type == 'Pad'\"))\n"
"\n"
"\n"
" # Upprätthåll mekanisk frigång mellan komponenter och mönsterkortets "
"kant\n"
" (rule front_mechanical_board_edge_clearance\n"
" (layer \"F.Courtyard\")\n"
" (constraint physical_clearance (min 3mm))\n"
" (condition \"B.Layer == 'Edge.Cuts'\"))\n"
"\n"
"\n"
" # Kontrollera strömkapacitet\n"
" (rule high-current\n"
" (constraint track_width (min 1.0mm))\n"
" (constraint connection_width (min 0.8mm))\n"
" (condition \"A.NetClass == 'Power'\"))"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:72
msgid "Default properties for new dimension objects:"
msgstr "Standardegenskaper för nya måttsättningsobjekt:"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:93
msgid ""
"Default units for dimensions (\"automatic\" to follow the chosen UI units)"
msgstr ""
"Förinställda måttenheter för måttsättning (\"automatisk\" för att följa de "
"enheter som valts i användargränssnittet)"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:100
msgid "Text position:"
msgstr "Textposition:"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:108
msgid "Where to position the dimension text relative to the dimension line"
msgstr "Var man placerar måttsättningstexten relativt måttlinjen"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:122
msgid "Keep text aligned"
msgstr "Håll texten inriktad"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:123
msgid "When checked, dimension text will be kept aligned with dimension lines"
msgstr "När det är markerat hålls måttsättningstexten i linje med måttlinjer"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:135
msgid "How many digits of precision to show"
msgstr "Hur många precisionssiffror som ska visas"
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:151
msgid ""
"When checked, \"1.2300\" will be rendered as \"1.23\" even if precision is "
"set to show more digits"
msgstr ""
"När det är markerat kommer \"1.2300\" att återges som \"1.23\" även om "
"precision är inställd på att visa fler siffror"
#: pcbnew/dialogs/panel_setup_tracks_and_vias.cpp:371
msgid "No via hole size defined."
msgstr "Via-diameter ej definierad."
#: pcbnew/dialogs/panel_setup_tracks_and_vias.cpp:385
msgid "No differential pair gap defined."
msgstr "Inget differentiellt paravstånd definierat."
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:20
msgid "Pre-defined track and via dimensions:"
msgstr "Fördefinierade ledar- och via-dimensioner:"
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:54
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:114
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:175
msgid "7"
msgstr "7"
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:101 pcbnew/pad.cpp:998
#: pcbnew/pcb_track.cpp:912 pcbnew/pcb_track.cpp:1276
msgid "Diameter"
msgstr "Diameter"
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:102 pcbnew/pad.cpp:1027
#: pcbnew/pcb_track.cpp:913 pcbnew/pcb_track.cpp:1278
#: pcbnew/tools/board_inspection_tool.cpp:921
#: pcbnew/tools/board_inspection_tool.cpp:950
msgid "Hole"
msgstr "Hål"
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:147
msgid "Differential Pairs"
msgstr "Differentialpar"
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:162
msgid "Gap"
msgstr "Glipa"
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:163
msgid "Via Gap"
msgstr "Viors isolationsavstånd"
#: pcbnew/drc/drc_cache_generator.cpp:132
msgid "Gathering copper items..."
msgstr "Samla kopparföremål ..."
#: pcbnew/drc/drc_engine.cpp:149
msgid "board setup constraints"
msgstr "mönsterkortsinställningarnas begränsningar"
#: pcbnew/drc/drc_engine.cpp:175
msgid "board setup constraints zone fill strategy"
msgstr "mönsterkortsinställningarnas begränsningar för zonfyllningsstrategi"
#: pcbnew/drc/drc_engine.cpp:180
msgid "board setup constraints silk"
msgstr "mönsterkortsinställningarnas begränsningar för anvisningstryck"
#: pcbnew/drc/drc_engine.cpp:186
msgid "board setup constraints silk text height"
msgstr ""
"mönsterkortsinställningarnas begränsning för texthöjd i anvisningstryck"
#: pcbnew/drc/drc_engine.cpp:192
msgid "board setup constraints silk text thickness"
msgstr ""
"mönsterkortsinställningarnas begränsning för textens vikt (linjetjocklek) i "
"anvisningstryck"
#: pcbnew/drc/drc_engine.cpp:198
msgid "board setup constraints hole"
msgstr "mönsterkortsinställningarnas begränsningar för hål"
#: pcbnew/drc/drc_engine.cpp:203
msgid "board setup constraints edge"
msgstr "mönsterkortsinställningarnas begränsningar för kanter"
#: pcbnew/drc/drc_engine.cpp:208
msgid "board setup constraints courtyard"
msgstr "mönsterkortsinställningarnas begränsningar för gårdsplan"
#: pcbnew/drc/drc_engine.cpp:215
msgid "board setup micro-via constraints"
msgstr "mönsterkortsinställningarnas begränsningar för mikrovior"
#: pcbnew/drc/drc_engine.cpp:241 pcbnew/drc/drc_engine.cpp:320
#: pcbnew/drc/drc_engine.cpp:348
#, c-format
msgid "netclass '%s'"
msgstr "nätklass '%s'"
#: pcbnew/drc/drc_engine.cpp:267 pcbnew/drc/drc_engine.cpp:285
#: pcbnew/drc/drc_engine.cpp:302
#, c-format
msgid "netclass '%s' (diff pair)"
msgstr "nätklass '%s' (differentialpar)"
#: pcbnew/drc/drc_engine.cpp:422
msgid "keepout area"
msgstr "spärrzon"
#: pcbnew/drc/drc_engine.cpp:424
#, c-format
msgid "keepout area '%s'"
msgstr "Spärrzon '%s'"
#: pcbnew/drc/drc_engine.cpp:618
#, c-format
msgid "Resolved zone connection type: %s."
msgstr "Fastställd zonanslutningstyp: %s."
#: pcbnew/drc/drc_engine.cpp:636
#, c-format
msgid "Pad is not a through hole pad; connection will be: %s."
msgstr "Lödytan är inte för hålmontering; anslutningen blir: %s."
#: pcbnew/drc/drc_engine.cpp:735 pcbnew/drc/drc_engine.cpp:745
#, c-format
msgid "Local override on %s; clearance: %s."
msgstr "Lokalt undantag för %s; frigång: %s."
#: pcbnew/drc/drc_engine.cpp:760 pcbnew/drc/drc_engine.cpp:1364
#: pcbnew/drc/drc_engine.cpp:1379
msgid "board minimum"
msgstr "kortminimum"
#: pcbnew/drc/drc_engine.cpp:763 pcbnew/drc/drc_engine.cpp:1358
#: pcbnew/drc/drc_engine.cpp:1373
#, c-format
msgid "Board minimum clearance: %s."
msgstr "Mönsterkortets minsta isolationsavstånd: %s."
#: pcbnew/drc/drc_engine.cpp:772
msgid "board minimum hole"
msgstr "kortets minsta hål"
#: pcbnew/drc/drc_engine.cpp:775
#, c-format
msgid "Board minimum hole clearance: %s."
msgstr "Mönsterkortets minsta frigång mellan hål: %s."
#: pcbnew/drc/drc_engine.cpp:794
#, c-format
msgid "Local override on %s; zone connection: %s."
msgstr "Lokalt undantag för %s; zonanslutning: %s."
#: pcbnew/drc/drc_engine.cpp:811
#, c-format
msgid "Local override on %s; thermal relief gap: %s."
msgstr "Lokal undantag för %s; värmeavlastningsavstånd: %s."
#: pcbnew/drc/drc_engine.cpp:828
#, c-format
msgid "Local override on %s; thermal spoke width: %s."
msgstr "Lokalt undantag för %s; värmeavlastningens ekerbredd: %s."
#: pcbnew/drc/drc_engine.cpp:837
#, c-format
msgid "%s min thickness: %s."
msgstr "%s minimibredd: %s."
#: pcbnew/drc/drc_engine.cpp:851
#, c-format
msgid "Checking assertion \"%s\"."
msgstr "Kontrollerar villkor \"%s\"."
#: pcbnew/drc/drc_engine.cpp:857 pcbnew/drc/drc_engine.cpp:1483
msgid "Assertion passed."
msgstr "Villkoret uppfylldes."
#: pcbnew/drc/drc_engine.cpp:861 pcbnew/drc/drc_engine.cpp:1487
msgid "--> Assertion failed. <--"
msgstr "--> Villkoret misslyckades. <--"
#: pcbnew/drc/drc_engine.cpp:881
#, c-format
msgid "Checking %s clearance: %s."
msgstr "Kontrollerar %s marginal: %s."
#: pcbnew/drc/drc_engine.cpp:887
#, c-format
msgid "Checking %s max uncoupled length: %s."
msgstr "Kontrollerar %s; maximal okopplad längd: %s."
#: pcbnew/drc/drc_engine.cpp:893
#, c-format
msgid "Checking %s max skew: %s."
msgstr "Kontrollerar %s max skevning: %s."
#: pcbnew/drc/drc_engine.cpp:899
#, c-format
msgid "Checking %s gap: %s."
msgstr "Kontrollerar %s mellanrum: %s."
#: pcbnew/drc/drc_engine.cpp:905
#, c-format
msgid "Checking %s thermal spoke width: %s."
msgstr "Kontrollerar %s ekerbredd för termisk avlastning: %s."
#: pcbnew/drc/drc_engine.cpp:911
#, c-format
msgid "Checking %s min spoke count: %s."
msgstr "Kontrollerar %s minsta antal termiska ekrar: %s."
#: pcbnew/drc/drc_engine.cpp:918
#, c-format
msgid "Checking %s zone connection: %s."
msgstr "Kontrollerar %s anslutning till zon: %s."
#: pcbnew/drc/drc_engine.cpp:936 pcbnew/drc/drc_engine.cpp:937
#: pcbnew/drc/drc_engine.cpp:938 pcbnew/tools/board_inspection_tool.cpp:213
#: pcbnew/tools/board_inspection_tool.cpp:222
#: pcbnew/tools/board_inspection_tool.cpp:231
msgid "undefined"
msgstr "odefinierad"
#: pcbnew/drc/drc_engine.cpp:950
#, c-format
msgid "Checking %s track width: opt %s."
msgstr "Kontrollerar %s ledarbredd: opt %s."
#: pcbnew/drc/drc_engine.cpp:956
#, c-format
msgid "Checking board setup constraints track width: min %s."
msgstr ""
"Kontrollerar mönsterkortsinställningarnas begränsning för ledarbredd: min %s."
#: pcbnew/drc/drc_engine.cpp:964
#, c-format
msgid "Checking %s annular width: min %s."
msgstr "Kontrollerar %s kragbredd: min %s."
#: pcbnew/drc/drc_engine.cpp:972
#, c-format
msgid "Checking %s via diameter: opt %s."
msgstr "Kontrollerar %s viadiameter: opt %s."
#: pcbnew/drc/drc_engine.cpp:978
#, c-format
msgid "Checking board setup constraints via diameter: min %s."
msgstr ""
"Kontrollerar mönsterkortsinställningarnas begränsning för viadiameter: min "
"%s."
#: pcbnew/drc/drc_engine.cpp:987
#, c-format
msgid "Checking %s hole size: opt %s."
msgstr "Kontrollerar %s håldiameter: opt %s."
#: pcbnew/drc/drc_engine.cpp:993
#, c-format
msgid "Checking board setup constraints hole size: min %s."
msgstr ""
"Kontrollerar mönsterkortsinställningarnas begränsning för håldiameter: min "
"%s."
#: pcbnew/drc/drc_engine.cpp:1003
#, c-format
msgid "Checking %s: min %s."
msgstr "Kontrollerar %s: min %s."
#: pcbnew/drc/drc_engine.cpp:1011
#, c-format
msgid "Checking %s diff pair gap: opt %s."
msgstr "Kontrollerar %s differentialpars mellanrum: opt %s."
#: pcbnew/drc/drc_engine.cpp:1018
#, c-format
msgid "Checking board setup constraints clearance: min %s."
msgstr ""
"Kontrollerar mönsterkortsinställningarnas begränsning för isolationsavstånd: "
"min %s."
#: pcbnew/drc/drc_engine.cpp:1026
#, c-format
msgid "Checking board setup constraints hole to hole: min %s."
msgstr ""
"Kontrollerar mönsterkortsinställningarnas begränsning för hål till hål: min "
"%s."
#: pcbnew/drc/drc_engine.cpp:1032 pcbnew/drc/drc_engine.cpp:1058
#: pcbnew/drc/drc_engine.cpp:1496
#, c-format
msgid "Checking %s."
msgstr "Kontrollerar %s."
#: pcbnew/drc/drc_engine.cpp:1047
#, c-format
msgid "Checking %s: min %s; opt %s; max %s."
msgstr "Kontrollerar %s: min %s; opt %s; max %s."
#: pcbnew/drc/drc_engine.cpp:1066
msgid "Board and netclass clearances apply only between copper items."
msgstr ""
"Isolationsavstånd från mönsterkortsinställningar och nätklasser gäller "
"endast mellan kopparföremål."
#: pcbnew/drc/drc_engine.cpp:1120
msgid "Keepout constraint not met."
msgstr "Begränsning i form av spärrzon uppfylls inte."
#: pcbnew/drc/drc_engine.cpp:1122
msgid "Disallow constraint not met."
msgstr "Tillåt begränsning inte uppfyllts."
#: pcbnew/drc/drc_engine.cpp:1144
msgid "Keepout layer(s) not matched."
msgstr "Spärrzons-lager överensstämmer inte."
#: pcbnew/drc/drc_engine.cpp:1148 pcbnew/drc/drc_engine.cpp:1169
#: pcbnew/drc/drc_engine.cpp:1500
#, c-format
msgid "Rule layer '%s' not matched; rule ignored."
msgstr "Regellager \"%s\" matchade inte, regel ingorerad."
#: pcbnew/drc/drc_engine.cpp:1153 pcbnew/drc/drc_engine.cpp:1174
msgid "Rule layer not matched; rule ignored."
msgstr "Regellager matchade inte; regel ignorerad."
#: pcbnew/drc/drc_engine.cpp:1188
#, c-format
msgid "%s is not a drilled hole; rule ignored."
msgstr "%s är inte ett borrat hål; regel ignoreras."
#: pcbnew/drc/drc_engine.cpp:1200
msgid "Unconditional constraint applied."
msgstr "Ovillkorlig begränsning tillämpas."
#: pcbnew/drc/drc_engine.cpp:1204 pcbnew/drc/drc_engine.cpp:1506
msgid "Unconditional rule applied."
msgstr "Ovillkorlig regel tillämpad."
#: pcbnew/drc/drc_engine.cpp:1209
msgid "Unconditional rule applied; overrides previous constraints."
msgstr "Ovillkorlig regel tillämpas; åsidosätter tidigare begränsningar."
#: pcbnew/drc/drc_engine.cpp:1224 pcbnew/drc/drc_engine.cpp:1511
#, c-format
msgid "Checking rule condition \"%s\"."
msgstr "Kontrollerar regelvillkor \"%s\"."
#: pcbnew/drc/drc_engine.cpp:1234
msgid "Constraint applied."
msgstr "Begränsning tillämpas."
#: pcbnew/drc/drc_engine.cpp:1238 pcbnew/drc/drc_engine.cpp:1517
msgid "Rule applied."
msgstr "Regel tillämpad."
#: pcbnew/drc/drc_engine.cpp:1243
msgid "Rule applied; overrides previous constraints."
msgstr "Regel tillämpas; åsidosätter tidigare begränsningar."
#: pcbnew/drc/drc_engine.cpp:1269
msgid "Membership not satisfied; constraint ignored."
msgstr "Medlemskap inte uppfyllt; begränsning ignoreras."
#: pcbnew/drc/drc_engine.cpp:1270 pcbnew/drc/drc_engine.cpp:1522
msgid "Condition not satisfied; rule ignored."
msgstr "Villkor inte uppfyllt; regel ignoreras."
#: pcbnew/drc/drc_engine.cpp:1326 pcbnew/drc/drc_engine.cpp:1343
#, c-format
msgid "Local clearance on %s; clearance: %s."
msgstr "Lokalt avstånd på %s; avstånd: %s."
#: pcbnew/drc/drc_engine.cpp:1394
#, c-format
msgid "%s zone connection: %s."
msgstr "%s anslutning till zon: %s."
#: pcbnew/drc/drc_engine.cpp:1410
#, c-format
msgid "%s pad connection: %s."
msgstr "%s lödyteanslutning: %s."
#: pcbnew/drc/drc_engine.cpp:1415 pcbnew/drc/drc_engine.cpp:1432
#: pcbnew/drc/drc_engine.cpp:1449 pcbnew/zone.cpp:362 pcbnew/zone.cpp:473
msgid "zone"
msgstr "zon"
#: pcbnew/drc/drc_engine.cpp:1427
#, c-format
msgid "%s thermal relief gap: %s."
msgstr "%s termiskt avlastningsgap: %s."
#: pcbnew/drc/drc_engine.cpp:1444
#, c-format
msgid "%s thermal spoke width: %s."
msgstr "%s termisk avlastning, ekerbredd: %s."
#: pcbnew/drc/drc_engine.cpp:1477
#, c-format
msgid "Checking rule assertion \"%s\"."
msgstr "Kontrollerar regelvillkor \"%s\"."
#: pcbnew/drc/drc_item.cpp:45
msgid "Electrical"
msgstr "Elektrisk"
#: pcbnew/drc/drc_item.cpp:46
msgid "Design for Manufacturing"
msgstr "Design för tillverkning"
#: pcbnew/drc/drc_item.cpp:47
msgid "Schematic Parity"
msgstr "Kretsschemaparitet"
#: pcbnew/drc/drc_item.cpp:48
msgid "Signal Integrity"
msgstr "Signalintegritet"
#: pcbnew/drc/drc_item.cpp:49
msgid "Readability"
msgstr "Läslighet"
#: pcbnew/drc/drc_item.cpp:53
msgid "Missing connection between items"
msgstr "Anslutning mellan element saknas"
#: pcbnew/drc/drc_item.cpp:57
msgid "Items shorting two nets"
msgstr "Objekt som kortsluter två nät"
#: pcbnew/drc/drc_item.cpp:61
msgid "Items not allowed"
msgstr "Objekt är inte tillåtna"
#: pcbnew/drc/drc_item.cpp:65
msgid "Text (or dimension) on Edge.Cuts layer"
msgstr "Text (eller måttsättning) på Edge.Cuts lager"
#: pcbnew/drc/drc_item.cpp:69
msgid "Clearance violation"
msgstr "Överträdelse av isolationsavstånd/frigång"
#: pcbnew/drc/drc_item.cpp:73
msgid "Tracks crossing"
msgstr "Ledare som korsar"
#: pcbnew/drc/drc_item.cpp:77
msgid "Board edge clearance violation"
msgstr "Regelöverträdelse för mönsterkortets kantmarginal"
#: pcbnew/drc/drc_item.cpp:81
msgid "Copper zones intersect"
msgstr "Kopparzoner överlappar"
#: pcbnew/drc/drc_item.cpp:85
msgid "Isolated copper fill"
msgstr "Isolerad kopparfyllning"
#: pcbnew/drc/drc_item.cpp:89
msgid "Thermal relief connection to zone incomplete"
msgstr "Ofullständig anslutning till zon genom termisk avlastning"
#: pcbnew/drc/drc_item.cpp:93
msgid "Via is not connected or connected on only one layer"
msgstr "Via är inte anslutet eller bara anslutet på ett lager"
#: pcbnew/drc/drc_item.cpp:97
msgid "Track has unconnected end"
msgstr "Ledarens ända saknar anslutning"
#: pcbnew/drc/drc_item.cpp:101
msgid "Hole clearance violation"
msgstr "Brott mot hålröjning"
#: pcbnew/drc/drc_item.cpp:105
msgid "Drilled holes too close together"
msgstr "Borrade hål för nära varandra"
#: pcbnew/drc/drc_item.cpp:109
msgid "Drilled holes co-located"
msgstr "Borrade hål på samma position"
#: pcbnew/drc/drc_item.cpp:113
msgid "Copper connection too narrow"
msgstr "Kopparanslutning för smal"
#: pcbnew/drc/drc_item.cpp:117
msgid "Track width"
msgstr "Ledarbredd"
#: pcbnew/drc/drc_item.cpp:121
msgid "Annular width"
msgstr "Ringformad bredd"
#: pcbnew/drc/drc_item.cpp:125
msgid "Drill out of range"
msgstr "Borra utom räckhåll"
#: pcbnew/drc/drc_item.cpp:129
msgid "Via diameter"
msgstr "Via-diameter"
#: pcbnew/drc/drc_item.cpp:133
msgid "Padstack is not valid"
msgstr "Kragstapeln är inte giltig"
#: pcbnew/drc/drc_item.cpp:137
msgid "Micro via drill out of range"
msgstr "Micro via borr utanför räckvidden"
#: pcbnew/drc/drc_item.cpp:141
msgid "Courtyards overlap"
msgstr "Gårdsplanerna överlappar varandra"
#: pcbnew/drc/drc_item.cpp:145
msgid "Footprint has no courtyard defined"
msgstr "Fotavtryck har ingen innergård definierad"
#: pcbnew/drc/drc_item.cpp:149
msgid "Footprint has malformed courtyard"
msgstr "Fotavtrycket har missformat innergården"
#: pcbnew/drc/drc_item.cpp:153
msgid "PTH inside courtyard"
msgstr "PTH inne på gården"
#: pcbnew/drc/drc_item.cpp:157
msgid "NPTH inside courtyard"
msgstr "NPTH inne på gården"
#: pcbnew/drc/drc_item.cpp:161
msgid "Item on a disabled copper layer"
msgstr "Objekt på ett inaktiverat kopparlager"
#: pcbnew/drc/drc_item.cpp:165
msgid "Board has malformed outline"
msgstr "Mönsterkortet har missformad kontur"
#: pcbnew/drc/drc_item.cpp:169
msgid "Duplicate footprints"
msgstr "Dubbla fotavtryck"
#: pcbnew/drc/drc_item.cpp:173
msgid "Missing footprint"
msgstr "Fotavtryck saknas"
#: pcbnew/drc/drc_item.cpp:177
msgid "Extra footprint"
msgstr "Extra fotavtryck"
#: pcbnew/drc/drc_item.cpp:181
msgid "Pad net doesn't match schematic"
msgstr "Lödytans nät matchar inte kretsschemat"
#: pcbnew/drc/drc_item.cpp:185
msgid "Footprint not found in libraries"
msgstr "Fotavtryck hittades inte i biblioteken"
#: pcbnew/drc/drc_item.cpp:189
msgid "Footprint doesn't match copy in library"
msgstr "Fotavtryck stämmer inte överens med kopia i bibliotek"
#: pcbnew/drc/drc_item.cpp:197
#, fuzzy
msgid "Assertion failure"
msgstr "Assertion failure"
#: pcbnew/drc/drc_item.cpp:201
msgid "Copper sliver"
msgstr "Kopparstrimla"
#: pcbnew/drc/drc_item.cpp:205
msgid "Solder mask aperture bridges items with different nets"
msgstr "Lödmasköppning överbryggar objekt från olika nät"
#: pcbnew/drc/drc_item.cpp:209
msgid "Silkscreen clipped by solder mask"
msgstr "Anvisningstryck klippt av lödmask"
#: pcbnew/drc/drc_item.cpp:213
msgid "Silkscreen clipped by board edge"
msgstr "Anvisningstryck klippt av mönsterkortskant"
#: pcbnew/drc/drc_item.cpp:217
msgid "Silkscreen overlap"
msgstr "Överlappande anvisningstryck"
#: pcbnew/drc/drc_item.cpp:221
msgid "Text height out of range"
msgstr "Texthöjd utanför intervall"
#: pcbnew/drc/drc_item.cpp:225
msgid "Text thickness out of range"
msgstr "Texttjocklek utanför intervall"
#: pcbnew/drc/drc_item.cpp:229
msgid "Trace length out of range"
msgstr "Ledarlängd utanför tillåtet intervall"
#: pcbnew/drc/drc_item.cpp:233
msgid "Skew between traces out of range"
msgstr "Skjuvning mellan ledare utanför intervall"
#: pcbnew/drc/drc_item.cpp:237
msgid "Too many vias on a connection"
msgstr "För många vior på en anslutning"
#: pcbnew/drc/drc_item.cpp:241
msgid "Differential pair gap out of range"
msgstr "Differentialparavstånd utanför intervallet"
#: pcbnew/drc/drc_item.cpp:245
msgid "Differential uncoupled length too long"
msgstr "Differentiell okopplad längd för lång"
#: pcbnew/drc/drc_item.cpp:249
msgid "Footprint is not valid"
msgstr "Fotavtryck är inte giltigt"
#: pcbnew/drc/drc_item.cpp:253
msgid "Footprint component type doesn't match footprint pads"
msgstr "Fotavtryckets komponenttyp stämmer inte överens med dess lödytor"
#: pcbnew/drc/drc_item.cpp:257
msgid "Through hole pad has no hole"
msgstr "Hålmonterings-lödyta har inget hål"
#: pcbnew/drc/drc_item.cpp:428
#, c-format
msgid "Rule: %s"
msgstr "Regel: %s"
#: pcbnew/drc/drc_item.cpp:430
msgid "Local override"
msgstr "Lokalt undantag"
#: pcbnew/drc/drc_rule.h:156
#, c-format
msgid "rule %s"
msgstr "regel %s"
#: pcbnew/drc/drc_rule_condition.cpp:52
msgid "ERROR in expression."
msgstr "FEL i uttryck."
#: pcbnew/drc/drc_rule_condition.cpp:100 pcbnew/drc/drc_rule_parser.cpp:61
#: pcbnew/drc/drc_rule_parser.cpp:573
#, c-format
msgid "ERROR: <a href='%d:%d'>%s</a>%s"
msgstr "FEL: <a href='%d:%d'>%s</a>%s"
#: pcbnew/drc/drc_rule_parser.cpp:68 pcbnew/drc/drc_rule_parser.cpp:580
#, c-format
msgid "ERROR: %s%s"
msgstr "FEL: %s %s"
#: pcbnew/drc/drc_rule_parser.cpp:79
#, c-format
msgid "The '%s' keyword has been deprecated. Please use '%s' instead."
msgstr "Nyckelordet '%s' är föråldrat. Vänligen använd '%s' istället."
#: pcbnew/drc/drc_rule_parser.cpp:117 pcbnew/drc/drc_rule_parser.cpp:200
#: pcbnew/drc/drc_rule_parser.cpp:477
msgid "Missing '('."
msgstr "Saknas '('."
#: pcbnew/drc/drc_rule_parser.cpp:123
msgid "Missing version statement."
msgstr "Versionsuttalande saknas."
#: pcbnew/drc/drc_rule_parser.cpp:135
msgid "Missing version number."
msgstr "Versionsnummer saknas."
#: pcbnew/drc/drc_rule_parser.cpp:147
#, c-format
msgid "Unrecognized item '%s'.| Expected version number."
msgstr "Okänt objekt '%s'. | Förväntat versionsnummer."
#: pcbnew/drc/drc_rule_parser.cpp:154 pcbnew/drc/drc_rule_parser.cpp:233
#: pcbnew/drc/drc_rule_parser.cpp:466 pcbnew/drc/drc_rule_parser.cpp:497
#: pcbnew/drc/drc_rule_parser.cpp:518 pcbnew/drc/drc_rule_parser.cpp:538
#: pcbnew/drc/drc_rule_parser.cpp:636
#, c-format
msgid "Unrecognized item '%s'."
msgstr "Okänt objekt '%s'."
#: pcbnew/drc/drc_rule_parser.cpp:167 pcbnew/drc/drc_rule_parser.cpp:249
#: pcbnew/drc/drc_rule_parser.cpp:545
msgid "Incomplete statement."
msgstr "Ofullständigt uttalande."
#: pcbnew/drc/drc_rule_parser.cpp:171 pcbnew/drc/drc_rule_parser.cpp:253
#: pcbnew/drc/drc_rule_parser.cpp:332 pcbnew/drc/drc_rule_parser.cpp:376
#: pcbnew/drc/drc_rule_parser.cpp:408 pcbnew/drc/drc_rule_parser.cpp:549
#: pcbnew/drc/drc_rule_parser.cpp:665
#, c-format
msgid "Unrecognized item '%s'.| Expected %s."
msgstr "Okänt objekt '%s'. | Förväntat %s."
#: pcbnew/drc/drc_rule_parser.cpp:193
msgid "Missing rule name."
msgstr "Regelnamn saknas."
#: pcbnew/drc/drc_rule_parser.cpp:215
msgid "Missing condition expression."
msgstr "Saknade tillståndsuttryck."
#: pcbnew/drc/drc_rule_parser.cpp:226 pcbnew/drc/drc_rule_parser.cpp:460
#, c-format
msgid "Unrecognized item '%s'.| Expected quoted expression."
msgstr "Okänt objekt '%s'. | Förväntat citerat uttryck."
#: pcbnew/drc/drc_rule_parser.cpp:261 pcbnew/drc/drc_rule_parser.cpp:372
#: pcbnew/drc/drc_rule_parser.cpp:385 pcbnew/drc/drc_rule_parser.cpp:404
#: pcbnew/drc/drc_rule_parser.cpp:415 pcbnew/drc/drc_rule_parser.cpp:441
#: pcbnew/drc/drc_rule_parser.cpp:558 pcbnew/drc/drc_rule_parser.cpp:673
msgid "Missing ')'."
msgstr "Saknas ')'."
#: pcbnew/drc/drc_rule_parser.cpp:292
#, c-format
msgid "Missing constraint type.| Expected %s."
msgstr "Begränsningstyp saknas Förväntat %s."
#: pcbnew/drc/drc_rule_parser.cpp:344
#, c-format
msgid "Rule already has a '%s' constraint."
msgstr "Regel har redan ett '%s' krav."
#: pcbnew/drc/drc_rule_parser.cpp:436
msgid "Expecting number."
msgstr "Förväntar nummer."
#: pcbnew/drc/drc_rule_parser.cpp:451
msgid "Missing assertion expression."
msgstr "Saknar villkorsuttryck."
#: pcbnew/drc/drc_rule_parser.cpp:488
msgid "Missing min value."
msgstr "Minvärde saknas."
#: pcbnew/drc/drc_rule_parser.cpp:508
msgid "Missing max value."
msgstr "Maxvärde saknas."
#: pcbnew/drc/drc_rule_parser.cpp:529
msgid "Missing opt value."
msgstr "Opt-värde saknas."
#: pcbnew/drc/drc_rule_parser.cpp:603
msgid "Missing layer name or type."
msgstr "Lagrets namn eller typ saknas."
#: pcbnew/drc/drc_rule_parser.cpp:629
#, c-format
msgid "Unrecognized layer '%s'."
msgstr "Okänt lager '%s'."
#: pcbnew/drc/drc_rule_parser.cpp:653
msgid "Missing severity name."
msgstr "Saknar namn för allvarlighetsgrad."
#: pcbnew/drc/drc_test_provider_annular_width.cpp:88
msgid "Checking pad & via annular rings..."
msgstr "Kontrollerar kragar på lödytor och vior..."
#: pcbnew/drc/drc_test_provider_annular_width.cpp:248
#, c-format
msgid "(%s min annular width %s; actual %s)"
msgstr "(%s min ringformad bredd %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_annular_width.cpp:256
#, c-format
msgid "(%s max annular width %s; actual %s)"
msgstr "(%s max ringformad bredd %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_connection_width.cpp:640
msgid "Checking nets for minimum connection width..."
msgstr "Kontrollerar nät med avseende på minsta bredd för anslutningar..."
#: pcbnew/drc/drc_test_provider_connection_width.cpp:779
#, c-format
msgid "(%s minimum connection width %s; actual %s)"
msgstr "(%s minsta anslutningsbredd %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_connectivity.cpp:71
msgid "Checking pad, via and zone connections..."
msgstr "Kontrollerar lödyte-, via- och zonanslutningar..."
#: pcbnew/drc/drc_test_provider_connectivity.cpp:155
msgid "Checking net connections..."
msgstr "Kontrollerar nätanslutningar ..."
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:134
msgid "Checking track & via clearances..."
msgstr "Kontrollerar isolationsavstånd mellan ledare och vias..."
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:141
msgid "Checking hole clearances..."
msgstr "Kontrollerar hålavstånd..."
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:149
msgid "Checking pad clearances..."
msgstr "Kontrollera vadderingsavstånd ..."
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:157
msgid "Checking pads..."
msgstr "Kontrollerar lödytor..."
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:165
msgid "Checking copper zone clearances..."
msgstr "Kontroll av kopparzonavstånd ..."
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:242
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:297
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:378
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:417
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:664
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:696
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:717
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:738
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:989
#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:232
#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:265
#: pcbnew/drc/drc_test_provider_edge_clearance.cpp:120
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:546
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:603
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:654
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:669
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:756
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:795
#: pcbnew/drc/drc_test_provider_silk_clearance.cpp:240
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:278
#, c-format
msgid "(%s clearance %s; actual %s)"
msgstr "(%s clearance %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:298
#, fuzzy, c-format
msgid "(%s clearance %s; actual < 0)"
msgstr "(%s clearance %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:633
#, c-format
msgid "(nets %s and %s)"
msgstr "(nät %s och %s)"
#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:85
msgid "Checking footprint courtyard definitions..."
msgstr "Kontrollerar innergårdens definitioner ..."
#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:90
msgid "Gathering footprint courtyards..."
msgstr "Samlar fotavtryckens gårdsplaner..."
#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:150
msgid "Checking footprints for overlapping courtyards..."
msgstr "Kontrollera fotavtryck för överlappande gårdar ..."
#: pcbnew/drc/drc_test_provider_diff_pair_coupling.cpp:431
#, c-format
msgid "(%s maximum uncoupled length %s; actual %s)"
msgstr "(%s maximal okopplad längd: %s; faktisk: %s)"
#: pcbnew/drc/drc_test_provider_diff_pair_coupling.cpp:482
#, c-format
msgid "(%s minimum gap %s; actual %s)"
msgstr "(%s minsta mellanrum %s; faktiskt %s)"
#: pcbnew/drc/drc_test_provider_diff_pair_coupling.cpp:489
#, c-format
msgid "(%s maximum gap %s; actual %s)"
msgstr "(%s maximalt mellanrum %s; faktiskt %s)"
#: pcbnew/drc/drc_test_provider_disallow.cpp:72
msgid "Checking keepouts & disallow constraints..."
msgstr "Kontrollerar spärrzons- och förbudsbegränsningar..."
#: pcbnew/drc/drc_test_provider_edge_clearance.cpp:144
msgid "Checking copper to board edge clearances..."
msgstr "Kontrollerar frigång mellan koppar och mönsterkortets ytterkontur..."
#: pcbnew/drc/drc_test_provider_edge_clearance.cpp:149
msgid "Checking silk to board edge clearances..."
msgstr "Kontrollerar avstånd anvisningstryck till kortkant..."
#: pcbnew/drc/drc_test_provider_hole_size.cpp:75
msgid "Checking pad holes..."
msgstr "Kontrollera dynhål ..."
#: pcbnew/drc/drc_test_provider_hole_size.cpp:93
msgid "Checking via holes..."
msgstr "Kontroll via hål ..."
#: pcbnew/drc/drc_test_provider_hole_size.cpp:98
msgid "Checking micro-via holes..."
msgstr "Kontrollerar viahål..."
#: pcbnew/drc/drc_test_provider_hole_size.cpp:158
#: pcbnew/drc/drc_test_provider_hole_size.cpp:227
#: pcbnew/drc/drc_test_provider_track_width.cpp:131
#, c-format
msgid "(%s min width %s; actual %s)"
msgstr "(%s min bredd %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_hole_size.cpp:165
#: pcbnew/drc/drc_test_provider_hole_size.cpp:234
#: pcbnew/drc/drc_test_provider_track_width.cpp:138
#, c-format
msgid "(%s max width %s; actual %s)"
msgstr "(%s max bredd %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_hole_to_hole.cpp:120
msgid "Checking hole to hole clearances..."
msgstr "Kontrollera hål till hålavstånd ..."
#: pcbnew/drc/drc_test_provider_hole_to_hole.cpp:304
#, c-format
msgid "(%s min %s; actual %s)"
msgstr "(%s min %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_library_parity.cpp:459
msgid "No project loaded, skipping library parity tests."
msgstr "Inget projekt öppnat, hoppar över biblioteksparitetskontroller."
#: pcbnew/drc/drc_test_provider_library_parity.cpp:463
msgid "Loading footprint library table..."
msgstr "Laddar tabell för fotavtrycksbibliotek..."
#: pcbnew/drc/drc_test_provider_library_parity.cpp:473
msgid "Checking board footprints against library..."
msgstr "Kontrollerar kortets fotavtryck mot bibliotek..."
#: pcbnew/drc/drc_test_provider_library_parity.cpp:505
#, c-format
msgid "The current configuration does not include the library '%s'."
msgstr "Den aktuella konfigurationen inkluderar inte biblioteket '%s'."
#: pcbnew/drc/drc_test_provider_library_parity.cpp:519
#, c-format
msgid "The library '%s' is not enabled in the current configuration."
msgstr "Biblioteket '%s' är inte aktiverat i den aktuella konfigurationen."
#: pcbnew/drc/drc_test_provider_library_parity.cpp:555
#, c-format
msgid "Footprint '%s' not found in library '%s'."
msgstr "Fotavtryck '%s' hittades inte i bibliotek '%s'."
#: pcbnew/drc/drc_test_provider_library_parity.cpp:568
#, c-format
msgid "Footprint '%s' does not match copy in library '%s'."
msgstr "Fotavtryck '%s' stämmer inte överens med kopia i bibliotek '%s'."
#: pcbnew/drc/drc_test_provider_matched_length.cpp:116
#, c-format
msgid "(%s min length %s; actual %s)"
msgstr "(%s min längd %s; faktisk: %s)"
#: pcbnew/drc/drc_test_provider_matched_length.cpp:123
#, c-format
msgid "(%s max length %s; actual %s)"
msgstr "(%s max längd: %s; faktisk: %s)"
#: pcbnew/drc/drc_test_provider_matched_length.cpp:160
#, c-format
msgid "(%s max skew %s; actual %s; average net length %s; actual %s)"
msgstr ""
"(%s max skevning: %s; faktisk: %s; genomsnittlig nätlängd: %s; faktisk: %s)"
#: pcbnew/drc/drc_test_provider_matched_length.cpp:189
#, c-format
msgid "(%s max count %d; actual %d)"
msgstr "(%s max antal %d; faktiskt %d)"
#: pcbnew/drc/drc_test_provider_matched_length.cpp:221
msgid "Gathering length-constrained connections..."
msgstr "Samlar längdbegränsade anslutningar ..."
#: pcbnew/drc/drc_test_provider_matched_length.cpp:336
msgid "<unconstrained>"
msgstr "<obegränsat>"
#: pcbnew/drc/drc_test_provider_matched_length.cpp:346
msgid "Checking length constraints..."
msgstr "Kontrollerar längdbegränsningar..."
#: pcbnew/drc/drc_test_provider_misc.cpp:113
msgid "(no edges found on Edge.Cuts layer)"
msgstr "(inga kanter hittades på Edge.Cuts lager)"
#: pcbnew/drc/drc_test_provider_misc.cpp:199
#, c-format
msgid "(layer %s)"
msgstr "(lager %s)"
#: pcbnew/drc/drc_test_provider_misc.cpp:341
msgid "Checking board outline..."
msgstr "Kontrollerar mönsterkortets kontur..."
#: pcbnew/drc/drc_test_provider_misc.cpp:349
msgid "Checking disabled layers..."
msgstr "Kontrollerar inaktiverade lager ..."
#: pcbnew/drc/drc_test_provider_misc.cpp:357
msgid "Checking text variables..."
msgstr "Kontrollerar textvariabler ..."
#: pcbnew/drc/drc_test_provider_misc.cpp:365
msgid "Checking assertions..."
msgstr "Kontrollerar villkor..."
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:108
msgid "Gathering physical items..."
msgstr "Samlar fysiska objekt..."
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:176
msgid "Checking physical clearances..."
msgstr "Kontrollerar fysisk frigång..."
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:497
#, c-format
msgid "Internal clearance violation (%s clearance %s; actual %s)"
msgstr "Intern frigångsöverträdelse (%s frigång %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:116
#, c-format
msgid "Missing footprint %s (%s)"
msgstr "Fotavtryck saknas %s (%s)"
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:141
msgid "No corresponding pin found in schematic."
msgstr "Inget motsvarande stift hittades i schemat."
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:151
#, c-format
msgid "Pad missing net given by schematic (%s)."
msgstr "Lödyta saknar nät som ges av kretsschemat (%s)."
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:162
#, c-format
msgid "Pad net (%s) doesn't match net given by schematic (%s)."
msgstr "Lödytans nät (%s) matchar inte nät från kretsschemat (%s)."
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:183
#, c-format
msgid "No pad found for pin %s in schematic."
msgstr "Ingen lödyta hittades för stift %s i kretsschemat."
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:219
msgid "Checking PCB to schematic parity..."
msgstr "Kontrollerar paritet mellan mönsterkort och kretsschema..."
#: pcbnew/drc/drc_test_provider_silk_clearance.cpp:97
msgid "Checking silkscreen for overlapping items..."
msgstr "Kontrollerar anvisningstryck med avseende på överlappande föremål ..."
#: pcbnew/drc/drc_test_provider_sliver_checker.cpp:84
msgid "Running sliver detection on copper layers..."
msgstr "Detekterar strimlor på kopparlager..."
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:55
msgid "board setup solder mask min width"
msgstr "mönsterkortsinställning lödmaskens minsta bredd"
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:510
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:604
msgid "Front solder mask aperture bridges items with different nets"
msgstr "Öppning i framsidans lödmask överbryggar objekt från olika nät"
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:512
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:606
msgid "Rear solder mask aperture bridges items with different nets"
msgstr "Öppning i baksidans lödmask överbryggar objekt från olika nät"
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:729
msgid "Building solder mask..."
msgstr "Bygger lödmask..."
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:737
msgid "Checking solder mask to silk clearance..."
msgstr "Kontrollerar avstånd mellan lödmask och anvisningstryck..."
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:742
msgid "Checking solder mask web integrity..."
msgstr "Kontrollerar lödmaskbryggornas integritet..."
#: pcbnew/drc/drc_test_provider_text_dims.cpp:88
msgid "Checking text dimensions..."
msgstr "Kontrollerar textdimensioner..."
#: pcbnew/drc/drc_test_provider_text_dims.cpp:108
#, c-format
msgid "(%s min height %s; actual %s)"
msgstr "(%s minsta höjd %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_text_dims.cpp:123
#, c-format
msgid "(%s max height %s; actual %s)"
msgstr "(%s maximal höjd %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_text_dims.cpp:211
msgid "(TrueType font characters with insufficient stroke weight)"
msgstr "(TrueType typsnittstecken med otillräcklig streckbredd)"
#: pcbnew/drc/drc_test_provider_text_dims.cpp:227
#, c-format
msgid "(%s min thickness %s; actual %s)"
msgstr "(%s minsta tjocklek %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_text_dims.cpp:242
#, c-format
msgid "(%s max thickness %s; actual %s)"
msgstr "(%s maximal tjocklek %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_track_width.cpp:76
msgid "Checking track widths..."
msgstr "Kontrollerar ledarbredder ..."
#: pcbnew/drc/drc_test_provider_via_diameter.cpp:76
msgid "Checking via diameters..."
msgstr "Kontroll via diametrar ..."
#: pcbnew/drc/drc_test_provider_via_diameter.cpp:121
#, c-format
msgid "(%s min diameter %s; actual %s)"
msgstr "(%s min diameter %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_via_diameter.cpp:128
#, c-format
msgid "(%s max diameter %s; actual %s)"
msgstr "(%s max diameter %s; faktisk %s)"
#: pcbnew/drc/drc_test_provider_zone_connections.cpp:170
#, c-format
msgid "(%s min spoke count %d; actual %d)"
msgstr "(%s minsta antal ekrar %d; faktisk %d)"
#: pcbnew/drc/drc_test_provider_zone_connections.cpp:192
msgid "Checking thermal reliefs..."
msgstr "Kontrollerar termisk avlastning..."
#: pcbnew/edit_zone_helpers.cpp:84 pcbnew/edit_zone_helpers.cpp:106
msgid "Modify zone properties"
msgstr "Ändra zonegenskaper"
#: pcbnew/exporters/export_d356.cpp:381
msgid "Export D-356 Test File"
msgstr "Exportera D-356 testfil"
#: pcbnew/exporters/export_footprint_associations.cpp:73
msgid "Save Footprint Association File"
msgstr "Spara Footprint Association-fil"
#: pcbnew/exporters/export_hyperlynx.cpp:171
msgid ""
"File contains pad shapes that are not supported by the Hyperlynx exporter "
"(supported shapes are oval, rectangle, rounded rectangle, and circle)."
msgstr ""
"Filen innehåller lödyteformer som inte stöds av Hyperlynx-exportören (former "
"som stöds är oval, rektangel, rundad rektangel och cirkel)."
#: pcbnew/exporters/export_hyperlynx.cpp:175
msgid "They have been exported as oval pads."
msgstr "De har exporterats som ovala lödytor."
#: pcbnew/exporters/export_hyperlynx.cpp:290
#: pcbnew/exporters/exporter_vrml.cpp:780
#: pcbnew/exporters/step/exporter_step.cpp:238
#: pcbnew/specctra_import_export/specctra_export.cpp:124
msgid "Board outline is malformed. Run DRC for a full analysis."
msgstr "Mönsterkortets kontur är felaktig. Kör DRC för en fullständig analys."
#: pcbnew/exporters/export_idf.cpp:655 pcbnew/exporters/export_idf.cpp:664
#: pcbnew/exporters/export_idf.cpp:672
msgid "IDF Export Failed:\n"
msgstr "IDF-export misslyckades:\n"
#: pcbnew/exporters/exporter_vrml.cpp:809
msgid "VRML Export Failed: Could not add holes to contours."
msgstr ""
"VRML-export misslyckades: Det gick inte att lägga till hål i konturerna."
#: pcbnew/exporters/exporter_vrml.cpp:1241
msgid "No project when exporting the VRML file"
msgstr "Inget projekt vid export av VRML-fil"
#: pcbnew/exporters/exporter_vrml.cpp:1301
msgid "VRML Export Failed:\n"
msgstr "VRML-export misslyckades:\n"
#: pcbnew/exporters/gendrill_Excellon_writer.cpp:127
#, c-format
msgid "Created file '%s'"
msgstr "Skapade fil '%s'"
#: pcbnew/exporters/gendrill_file_writer_base.cpp:346
#: pcbnew/exporters/gendrill_gerber_writer.cpp:111
#, c-format
msgid "Created file '%s'."
msgstr "Skapade fil '%s'."
#: pcbnew/exporters/gerber_jobfile_writer.cpp:159
#, c-format
msgid "Created Gerber job file '%s'."
msgstr "Skapade Gerber-jobbfil '%s'."
#: pcbnew/exporters/gerber_jobfile_writer.cpp:592
msgid "Board stackup settings not up to date."
msgstr "Kortets lageruppbyggnadsinställningar är inte aktuella."
#: pcbnew/exporters/step/exporter_step.cpp:318
msgid "Determining PCB data\n"
msgstr "Tar reda på data för mönsterkort\n"
#: pcbnew/exporters/step/exporter_step.cpp:323
msgid "Build STEP data\n"
msgstr "Bygg STEP-data\n"
#: pcbnew/exporters/step/exporter_step.cpp:327
msgid ""
"\n"
"** Error building STEP board model. Export aborted. **\n"
msgstr ""
"\n"
"** Fel vid uppbyggnad av STEP mönsterkortsmodell. Export avbruten. **\n"
#: pcbnew/exporters/step/exporter_step.cpp:331
msgid "Writing STEP file\n"
msgstr "Skriver STEP-fil\n"
#: pcbnew/exporters/step/exporter_step.cpp:335
msgid ""
"\n"
"** Error writing STEP file. **\n"
msgstr ""
"\n"
"** Fel vid skrivning av STEP-fil. **\n"
#: pcbnew/exporters/step/exporter_step.cpp:340
#, c-format
msgid ""
"\n"
"STEP file '%s' created.\n"
msgstr ""
"\n"
"STEP-fil '%s' skapad.\n"
#: pcbnew/exporters/step/exporter_step.cpp:346
#: pcbnew/exporters/step/exporter_step.cpp:351
msgid ""
"\n"
"** Error exporting STEP file. Export aborted. **\n"
msgstr ""
"\n"
"** Fel vid export av STEP-fil. Export avbruten. **\n"
#: pcbnew/exporters/step/exporter_step.cpp:361
msgid ""
"Unable to create STEP file.\n"
"Check that the board has a valid outline and models."
msgstr ""
"Kunde inte skapa STEP-fil.\n"
"Kontrollera att mönserkortet har en giltig definition av kant och giltiga "
"modeller."
#: pcbnew/exporters/step/exporter_step.cpp:366
msgid "STEP file has been created, but there are warnings."
msgstr "STEP-fil har skapats, men det finns varningar."
#: pcbnew/files.cpp:151
msgid "All KiCad Board Files"
msgstr "Alla KiCad Board-filer"
#: pcbnew/files.cpp:192
msgid "Open Board File"
msgstr "Öppna mönsterkortsfil"
#: pcbnew/files.cpp:192
msgid "Import Non KiCad Board File"
msgstr "Importera icke KiCad Board-fil"
#: pcbnew/files.cpp:228
msgid "Save Board File As"
msgstr "Spara mönsterkortsfil som"
#: pcbnew/files.cpp:271
msgid "Printed circuit board"
msgstr "Tryckt kretskort"
#: pcbnew/files.cpp:335
#, c-format
msgid "Recovery file '%s' not found."
msgstr "Återställningsfilen '%s' hittades inte."
#: pcbnew/files.cpp:340
#, c-format
msgid "OK to load recovery file '%s'?"
msgstr "OK att ladda återställningsfilen '%s'?"
#: pcbnew/files.cpp:379
#, c-format
msgid "Current board will be closed, save changes to '%s' before continuing?"
msgstr "Det aktuella kortet stängs, spara ändringar till '%s' först?"
#: pcbnew/files.cpp:393
msgid "Current Board will be closed. Continue?"
msgstr "Aktuellt mönsterkort kommer att stängas. Vill du fortsätta?"
#: pcbnew/files.cpp:563
msgid ""
"If the zones on this board are refilled the Copper Edge Clearance setting "
"will be used (see Board Setup > Design Rules > Constraints).\n"
"This may result in different fills from previous KiCad versions which used "
"the line thicknesses of the board boundary on the Edge Cuts layer."
msgstr ""
"Om zonerna på det här kortet återfylls kommer inställningen för koppar till "
"kant-avstånd att användas (se Mönsterkortsinställningar > Designregler > "
"Begränsningar).\n"
"Detta kan resultera i fyllningar som skiljer sig från tidigare Kicad-"
"versioner som använde linjetjockleken för kortkanten på Edge Cuts-lagret."
#: pcbnew/files.cpp:568
msgid "Edge Clearance Warning"
msgstr "Varning för kantavstånd"
#: pcbnew/files.cpp:599
#, c-format
msgid "PCB '%s' is already open."
msgstr "Mönsterkortet '%s' är redan öppet."
#: pcbnew/files.cpp:607
msgid "The current PCB has been modified. Save changes?"
msgstr "Nuvarande kretskort har modifierats. Spara ändringar?"
#: pcbnew/files.cpp:629
#, c-format
msgid "PCB '%s' does not exist. Do you wish to create it?"
msgstr "Mönsterkort '%s' finns inte. Vill du skapa det?"
#: pcbnew/files.cpp:638
msgid "Creating PCB"
msgstr "Skapar mönsterkort"
#: pcbnew/files.cpp:743 pcbnew/files.cpp:753
#, c-format
msgid "Error loading PCB '%s'."
msgstr "Fel vid inläsning av mönsterkort '%s'."
#: pcbnew/files.cpp:762
#, c-format
msgid "Memory exhausted loading PCB '%s'"
msgstr "Slut på minne vid inläsning av mönsterkort '%s'"
#: pcbnew/files.cpp:875
#, c-format
msgid "Error saving footprint %s to project specific library."
msgstr ""
"Fel inträffade under sparande av fotavtrycket %s till projektspecifikt "
"bibliotek."
#: pcbnew/files.cpp:906
msgid "Error saving project specific footprint library table."
msgstr ""
"Ett fel uppstod när den projektspecifika fotavtrycksbibliotekstabellen "
"skulle sparas."
#: pcbnew/files.cpp:982
msgid "Converting zone fills"
msgstr "Konverterar zonfyllningar"
#: pcbnew/files.cpp:986
msgid "Convert Zone(s)"
msgstr "Konvertera zon(er)"
#: pcbnew/files.cpp:1023 pcbnew/files.cpp:1158
#: pcbnew/footprint_libraries_utils.cpp:367
#, c-format
msgid "Insufficient permissions to write file '%s'."
msgstr "Otillräckliga behörigheter för att spara filen '%s'."
#: pcbnew/files.cpp:1051 pcbnew/files.cpp:1203
#, c-format
msgid "Error saving custom rules file '%s'."
msgstr "Fel under sparning av fil för anpassade regler '%s'."
#: pcbnew/files.cpp:1077 pcbnew/files.cpp:1179
#, c-format
msgid ""
"Error saving board file '%s'.\n"
"%s"
msgstr ""
"Fel vid sparning av mönsterkortsfil '%s'.\n"
"%s"
#: pcbnew/files.cpp:1094
#, c-format
msgid ""
"Error saving board file '%s'.\n"
"Failed to rename temporary file '%s."
msgstr ""
"Fel vid sparning av mönsterkortsfil '%s'.\n"
"Kunde inte byta namn på temporär fil '%s."
#: pcbnew/files.cpp:1207
#, c-format
msgid ""
"Board copied to:\n"
"%s"
msgstr ""
"Mönsterkort kopierat till:\n"
"%s"
#: pcbnew/footprint.cpp:769 pcbnew/footprint_libraries_utils.cpp:1244
msgid "Other"
msgstr "Annat"
#: pcbnew/footprint.cpp:1025
msgid "Last Change"
msgstr "Sista ändring"
#: pcbnew/footprint.cpp:1029
msgid "Board Side"
msgstr "Mönsterkortssida"
#: pcbnew/footprint.cpp:1029
msgid "Back (Flipped)"
msgstr "Baksida (spegelvänd)"
#: pcbnew/footprint.cpp:1047
msgid "autoplaced"
msgstr "autoplacerad"
#: pcbnew/footprint.cpp:1050
msgid "not in schematic"
msgstr "ej i kretsschemat"
#: pcbnew/footprint.cpp:1053
msgid "exclude from pos files"
msgstr "exkludera från pos-filer"
#: pcbnew/footprint.cpp:1056
msgid "exclude from BOM"
msgstr "exkludera från komponentlistan"
#: pcbnew/footprint.cpp:1058
msgid "Status: "
msgstr "Status: "
#: pcbnew/footprint.cpp:1058
msgid "Attributes:"
msgstr "Attribut:"
#: pcbnew/footprint.cpp:1064
#, c-format
msgid "3D-Shape: %s"
msgstr "3D-form: %s"
#: pcbnew/footprint.cpp:1064
msgid "<none>"
msgstr "<inget>"
#: pcbnew/footprint.cpp:1068 pcbnew/tools/pcb_control.cpp:1367
#, c-format
msgid "Doc: %s"
msgstr "Dok: %s"
#: pcbnew/footprint.cpp:1069 pcbnew/tools/pcb_control.cpp:1368
#, c-format
msgid "Keywords: %s"
msgstr "Nyckelord: %s"
#: pcbnew/footprint.cpp:1349
msgid "<no reference designator>"
msgstr "<ingen referensbeteckning>"
#: pcbnew/footprint.cpp:1351
#, c-format
msgid "Footprint %s"
msgstr "Fotavtryck: %s"
#: pcbnew/footprint.cpp:2326
#, c-format
msgid "(expected 'Through hole'; actual '%s')"
msgstr "(förväntad typ är 'hålmonteringshål' men är satt till '%s')"
#: pcbnew/footprint.cpp:2329
#, c-format
msgid "(expected 'SMD'; actual '%s')"
msgstr "(förväntar 'SMD'; faktisk %s)"
#: pcbnew/footprint.cpp:2357
msgid "(PTH pad has no copper layers)"
msgstr "(Hålmonteringshål har inga kopparlager)"
#: pcbnew/footprint.cpp:2376
msgid "(PTH pad's hole leaves no copper)"
msgstr "(Hålmonteringslödytans hål lämnar ingen koppar kvar)"
#: pcbnew/footprint.cpp:2385
msgid "(SMD pad appears on both front and back copper)"
msgstr "(SMD-lödyta förekommer på både främre och bakre kopparlager)"
#: pcbnew/footprint.cpp:2392 pcbnew/footprint.cpp:2405
msgid "(SMD pad copper and mask layers don't match)"
msgstr "(SMD-lödytans koppar och masklager matchar inte)"
#: pcbnew/footprint.cpp:2397 pcbnew/footprint.cpp:2410
msgid "(SMD pad copper and paste layers don't match)"
msgstr "(SMD-lödytans koppar och lodpastelager matchar inte)"
#: pcbnew/footprint.cpp:2586
#, c-format
msgid "(net-tie pad group contains unknown pad number %s)"
msgstr "(lödytegruppen med nätbryggor innehåller okändt lödytenummer %s)"
#: pcbnew/footprint.cpp:2591
#, c-format
msgid "(pad %s appears in more than one net-tie pad group)"
msgstr "(lödyta %s förekommer i mer än en lödytegrupp med nätbrygga)"
#: pcbnew/footprint.cpp:2832 pcbnew/pad.cpp:1718 pcbnew/zone.cpp:1362
msgid "Inherited"
msgstr "Ärvt"
#: pcbnew/footprint.cpp:2836 pcbnew/pad.cpp:1722 pcbnew/zone.cpp:1366
msgid "Thermal reliefs for PTH"
msgstr "Termiska avlastningar för genompläterade hål (PTH)"
#: pcbnew/footprint.cpp:2878
msgid "Library link"
msgstr "Bibliotekslänk"
#: pcbnew/footprint.cpp:2899 pcbnew/pad.cpp:1804 pcbnew/zone.cpp:1464
msgid "Overrides"
msgstr "Åsidosättanden"
#: pcbnew/footprint.cpp:2905 pcbnew/pad.cpp:1806 pcbnew/zone.cpp:1466
msgid "Clearance Override"
msgstr "Undantag för isolationsavstånd"
#: pcbnew/footprint.cpp:2909 pcbnew/pad.cpp:1812
msgid "Solderpaste Margin Override"
msgstr "Lokal marginal för lodpasta"
#: pcbnew/footprint.cpp:2914 pcbnew/pad.cpp:1815
msgid "Solderpaste Margin Ratio Override"
msgstr "Lokal proportion för lodpastemarginal"
#: pcbnew/footprint.cpp:2919 pcbnew/pad.cpp:1819
msgid "Zone Connection Style"
msgstr "Zonanslutningsstil"
#: pcbnew/footprint.h:236
#, c-format
msgid "footprint %s"
msgstr "fotavtryck %s"
#: pcbnew/footprint_edit_frame.cpp:114
msgid "KiCad Footprint Editor"
msgstr "KiCad fotavtrycksredigerare"
#: pcbnew/footprint_edit_frame.cpp:192 pcbnew/zone_settings.cpp:224
msgid "Inner layers"
msgstr "Inre lager"
#: pcbnew/footprint_edit_frame.cpp:231 pcbnew/footprint_edit_frame.cpp:836
#: pcbnew/pcb_edit_frame.cpp:293 pcbnew/pcb_edit_frame.cpp:1480
msgid "Selection Filter"
msgstr "Urvalsfilter"
#: pcbnew/footprint_edit_frame.cpp:299
msgid "Footprint changes are unsaved"
msgstr "Ändringar av fotavtryck sparas inte"
#: pcbnew/footprint_edit_frame.cpp:523
#, c-format
msgid "Editing %s from board. Saving will update the board only."
msgstr "Redigerar %s från kort. Om du sparar uppdateras endast kortet."
#: pcbnew/footprint_edit_frame.cpp:876
#, c-format
msgid "[from %s]"
msgstr "[från %s]"
#: pcbnew/footprint_edit_frame.cpp:911
msgid "[no footprint loaded]"
msgstr "[Inget fotavtryck laddat]"
#: pcbnew/footprint_edit_frame.cpp:967
msgid "Updating Footprint Libraries"
msgstr "Uppdaterar fotavtrycksbibliotek"
#: pcbnew/footprint_edit_frame.cpp:1266
msgid "No footprint selected."
msgstr "Inget fotavtryck har valts."
#: pcbnew/footprint_edit_frame.cpp:1275
#, fuzzy
msgid "Footprint Image File Name"
msgstr "Filnamn för fotavtrycks grafik"
#: pcbnew/footprint_editor_utils.cpp:252
msgid "Edit Zone"
msgstr "Redigera zon"
#: pcbnew/footprint_editor_utils.cpp:331
#, c-format
msgid ""
"The current configuration does not include a library named '%s'.\n"
"Use Manage Footprint Libraries to edit the configuration."
msgstr ""
"Den aktuella konfigurationen inkluderar inte ett bibliotek med namnet '%s'.\n"
"Använd Manage Footprint Libraries för att redigera konfigurationen."
#: pcbnew/footprint_editor_utils.cpp:334
msgid "Library not found in footprint library table."
msgstr "Biblioteket hittades inte i tabellen för fotavtryck."
#: pcbnew/footprint_editor_utils.cpp:343
#, c-format
msgid ""
"The library '%s' is not enabled in the current configuration.\n"
"Use Manage Footprint Libraries to edit the configuration."
msgstr ""
"Biblioteket '%s' är inte aktiverat i den aktuella konfigurationen.\n"
"Använd Manage Footprint Libraries för att redigera konfigurationen."
#: pcbnew/footprint_editor_utils.cpp:346 pcbnew/footprint_viewer_frame.cpp:1107
msgid "Footprint library not enabled."
msgstr "Fotavtrycksbiblioteket är inte aktiverat."
#: pcbnew/footprint_info_impl.cpp:122
msgid "Fetching footprint libraries..."
msgstr "Hämtar fotavtrycksbibliotek..."
#: pcbnew/footprint_info_impl.cpp:153
msgid "Loading footprints..."
msgstr "Laddar fotavtryck..."
#: pcbnew/footprint_libraries_utils.cpp:61
msgid ""
"Writing/modifying legacy libraries (.mod files) is not allowed\n"
"Please save the current library to the new .pretty format\n"
"and update your footprint lib table\n"
"to save your footprint (a .kicad_mod file) in the .pretty library folder"
msgstr ""
"Skrivning / modifiering av äldre bibliotek (.mod-filer) är inte tillåtet\n"
"Spara det aktuella biblioteket i det nya .pretty-formatet\n"
"och uppdatera din footprint lib-tabell\n"
"för att spara ditt fotavtryck (en .kicad_mod-fil) i .pretty-biblioteksmappen"
#: pcbnew/footprint_libraries_utils.cpp:67
msgid ""
"Modifying legacy libraries (.mod files) is not allowed\n"
"Please save the current library under the new .pretty format\n"
"and update your footprint lib table\n"
"before deleting a footprint"
msgstr ""
"Det är inte tillåtet att ändra äldre bibliotek (.mod-filer)\n"
"Spara det aktuella biblioteket i det nya .pretty-formatet\n"
"och uppdatera din footprint lib-tabell\n"
"innan du tar bort ett fotavtryck"
#: pcbnew/footprint_libraries_utils.cpp:88
msgid "Import Footprint"
msgstr "Importera fotavtryck"
#: pcbnew/footprint_libraries_utils.cpp:269
msgid "Not a footprint file."
msgstr "Inte en fotavtrycksfil."
#: pcbnew/footprint_libraries_utils.cpp:281
#, c-format
msgid "Unable to load footprint '%s' from '%s'"
msgstr "Det gick inte att ladda fotavtrycket '%s' från '%s'"
#: pcbnew/footprint_libraries_utils.cpp:338
msgid "Export Footprint"
msgstr "Exportera fotavtryck"
#: pcbnew/footprint_libraries_utils.cpp:381
#, c-format
msgid "Footprint exported to file '%s'."
msgstr "Fotavtryck exporterat till fil '%s'."
#: pcbnew/footprint_libraries_utils.cpp:470
#, c-format
msgid "Library %s is read only."
msgstr "Biblioteket '%s' är skrivskyddat."
#: pcbnew/footprint_libraries_utils.cpp:476
#, c-format
msgid "Library %s already exists."
msgstr "Biblioteket %s finns redan."
#: pcbnew/footprint_libraries_utils.cpp:634
#: pcbnew/plugins/geda/gpcb_plugin.cpp:973
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2583
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2659
#, c-format
msgid "Library '%s' is read only."
msgstr "Biblioteket '%s' är skrivskyddat."
#: pcbnew/footprint_libraries_utils.cpp:640
#, c-format
msgid "Delete footprint '%s' from library '%s'?"
msgstr "Ta bort fotavtryck '%s' från biblioteket '%s'?"
#: pcbnew/footprint_libraries_utils.cpp:657
#, c-format
msgid "Footprint '%s' deleted from library '%s'"
msgstr "Fotavtryck '%s' raderat från biblioteket '%s'"
#: pcbnew/footprint_libraries_utils.cpp:672
msgid "No footprints to export!"
msgstr "Inga fotavtryck att exportera!"
#: pcbnew/footprint_libraries_utils.cpp:694
#, c-format
msgid "Update footprints on board to refer to %s?"
msgstr "Uppdatera fotavtryck på kortet så de refererar till %s?"
#: pcbnew/footprint_libraries_utils.cpp:741
msgid "Update footprints on board to refer to new library?"
msgstr "Uppdatera fotavtrycken på kortet så de refererar till nytt bibliotek?"
#: pcbnew/footprint_libraries_utils.cpp:918
#: pcbnew/footprint_viewer_frame.cpp:826
msgid "No board currently open."
msgstr "Inget mönsterkort är för närvarande öppnat."
#: pcbnew/footprint_libraries_utils.cpp:944
msgid ""
"Unable to find the footprint on the main board.\n"
"Cannot save."
msgstr ""
"Det går inte att hitta fotavtrycket på huvudkortet.\n"
"Det går inte att spara."
#: pcbnew/footprint_libraries_utils.cpp:952
#: pcbnew/footprint_viewer_frame.cpp:834
msgid "Previous footprint placement still in progress."
msgstr "Föregående fotavtrycksplacering pågår fortfarande."
#: pcbnew/footprint_libraries_utils.cpp:1055
msgid "Save Footprint As"
msgstr "Spara fotavtryck som"
#: pcbnew/footprint_libraries_utils.cpp:1139
msgid "No library specified. Footprint could not be saved."
msgstr "Inget bibliotek specificerat. Fotavtryck kunde inte sparas."
#: pcbnew/footprint_libraries_utils.cpp:1149
msgid "No footprint name specified. Footprint could not be saved."
msgstr "Inget fotavtryck anges. Fotavtryck kunde inte sparas."
#: pcbnew/footprint_libraries_utils.cpp:1173
#, c-format
msgid "Footprint %s already exists in %s."
msgstr "Fotavtryck %s finns redan i %s."
#: pcbnew/footprint_libraries_utils.cpp:1189
#, c-format
msgid "Footprint '%s' replaced in '%s'"
msgstr "Fotavtryck '%s' ersatt med '%s'"
#: pcbnew/footprint_libraries_utils.cpp:1190
#, c-format
msgid "Footprint '%s' added to '%s'"
msgstr "Fotavtryck '%s' läggs till i '%s'"
#: pcbnew/footprint_libraries_utils.cpp:1242
msgid "Enter footprint name:"
msgstr "Ange fotavtrycksnamn:"
#: pcbnew/footprint_libraries_utils.cpp:1242
msgid "New Footprint"
msgstr "Nytt fotavtryck"
#: pcbnew/footprint_libraries_utils.cpp:1267
msgid "No footprint name defined."
msgstr "Inget namn på fotavtryck definierat."
#: pcbnew/footprint_viewer_frame.cpp:127
msgid "KiCad Footprint Library Viewer"
msgstr "KiCad fotavtryckbiblioteksvisare"
#: pcbnew/footprint_viewer_frame.cpp:169
msgid ""
"Filter on footprint name, keywords, description and pad count.\n"
"Search terms are separated by spaces. All search terms must match.\n"
"A term which is a number will also match against the pad count."
msgstr ""
"Filtrera på fotavtrycksnamn, nyckelord, beskrivning och antal lödytor.\n"
"Söktermer är åtskilda av mellanslag. Alla söktermer måste matcha.\n"
"En term som är ett nummer kommer också att matcha mot antalet lödytor."
#: pcbnew/footprint_viewer_frame.cpp:758
#, c-format
msgid ""
"Could not load footprint '%s' from library '%s'.\n"
"\n"
"%s"
msgstr ""
"Det gick inte att ladda fotavtrycket '%s' från biblioteket '%s'.\n"
"\n"
"%s"
#: pcbnew/footprint_viewer_frame.cpp:1097
#, c-format
msgid ""
"The current configuration does not include library '%s'. Use Manage "
"Footprint Libraries to edit the configuration."
msgstr ""
"Den aktuella konfigurationen inkluderar inte biblioteket '%s'. Använd Manage "
"Footprint Libraries för att redigera konfigurationen."
#: pcbnew/footprint_viewer_frame.cpp:1100
msgid "Footprint library not found."
msgstr "Footprint-biblioteket hittades inte."
#: pcbnew/footprint_viewer_frame.cpp:1104
#, c-format
msgid ""
"Library '%s' is not enabled in the current configuration. Use Manage "
"Footprint Libraries to edit the configuration."
msgstr ""
"Biblioteket '%s' är inte aktiverat i den aktuella konfigurationen. Använd "
"Manage Footprint Libraries för att redigera konfigurationen."
#: pcbnew/footprint_wizard_frame.cpp:81
#: pcbnew/footprint_wizard_frame_functions.cpp:82
msgid "Footprint Wizard"
msgstr "Fotavtrycksguiden"
#: pcbnew/footprint_wizard_frame.cpp:564
#, c-format
msgid "ModView: 3D Viewer [%s]"
msgstr "ModView: 3D-visare [%s]"
#: pcbnew/footprint_wizard_frame.cpp:585
msgid "Select wizard script to run"
msgstr "Välj guiden manus att köra"
#: pcbnew/footprint_wizard_frame.cpp:590
msgid "Reset wizard parameters to default"
msgstr "Återställ parametrarna i guiden till standardvärden"
#: pcbnew/footprint_wizard_frame.cpp:595
msgid "Select previous parameters page"
msgstr "Välj sidan för tidigare parametrar"
#: pcbnew/footprint_wizard_frame.cpp:598
msgid "Select next parameters page"
msgstr "Välj nästa parametersida"
#: pcbnew/footprint_wizard_frame.cpp:615
msgid "Export footprint to editor"
msgstr "Exportera fotavtryck till redigeraren"
#: pcbnew/footprint_wizard_frame_functions.cpp:88
msgid "no wizard selected"
msgstr "ingen guide vald"
#: pcbnew/footprint_wizard_frame_functions.cpp:140
msgid "Couldn't reload footprint wizard"
msgstr "Det gick inte att ladda om fotavtrycksguiden"
#: pcbnew/fp_shape.cpp:126 pcbnew/pcb_shape.cpp:317
#, c-format
msgid "%s on %s"
msgstr "%s på %s"
#: pcbnew/fp_text.cpp:299
msgid "Display"
msgstr "Visa"
#: pcbnew/fp_text.cpp:321
#, c-format
msgid "Reference '%s'"
msgstr "Referens '%s'"
#: pcbnew/fp_text.cpp:325
#, c-format
msgid "Value '%s' of %s"
msgstr "Värde '%s' av %s"
#: pcbnew/fp_text.cpp:330
#, c-format
msgid "Footprint Text '%s' of %s"
msgstr "Footprint Text '%s' av %s"
#: pcbnew/fp_textbox.cpp:332
#, c-format
msgid "Footprint Text Box of %s"
msgstr "Fotavtrycks textruta för %s"
#: pcbnew/generate_footprint_info.cpp:43
msgid "Documentation"
msgstr "Dokumentation"
#: pcbnew/generate_footprint_info.cpp:81
#, c-format
msgid "Error loading footprint %s from library '%s'."
msgstr "Fel vid inläsning av fotavtryck %s från bibliotek '%s'."
#: pcbnew/generate_footprint_info.cpp:122
msgid "doc url"
msgstr "doc url"
#: pcbnew/import_gfx/dialog_import_gfx.cpp:52
msgid "Centimeter"
msgstr "centimeter"
#: pcbnew/import_gfx/dialog_import_gfx.cpp:53
msgid "Feet"
msgstr "Fötter"
#: pcbnew/import_gfx/dialog_import_gfx.cpp:193
msgid "Open File"
msgstr "Öppna fil"
#: pcbnew/import_gfx/dialog_import_gfx.cpp:208
msgid "No file selected!"
msgstr "Ingen fil vald!"
#: pcbnew/import_gfx/dialog_import_gfx.cpp:214
msgid "Please select a valid layer."
msgstr "Välj ett giltigt lager."
#: pcbnew/import_gfx/dialog_import_gfx.cpp:271
msgid "Items in the imported file could not be handled properly."
msgstr "Objekt i den importerade filen kunde inte hanteras ordentligt."
#: pcbnew/import_gfx/dialog_import_gfx.cpp:281
msgid "There is no plugin to handle this file type."
msgstr "Det finns inget plugin för att hantera den här filtypen."
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:27
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:32
msgid "Only vectors will be imported. Bitmaps and fonts will be ignored."
msgstr "Endast vektorer importeras. Bitmappar och teckensnitt ignoreras."
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:44
msgid "Placement"
msgstr "Placering"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:49
msgid "Interactive placement"
msgstr "Interaktiv placering"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:56
msgid "At"
msgstr "På"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:75
msgid "DXF origin on PCB Grid, X Coordinate"
msgstr "DXF-origo på PCB Grid, X Coordinate"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:96
msgid "DXF origin on PCB Grid, Y Coordinate"
msgstr "DXF-origo på PCB Grid, Y Coordinate"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:117
msgid "Import Parameters"
msgstr "Importera parametrar"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:128
msgid "Graphic layer:"
msgstr "Grafiskt lager:"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:138
msgid "Import scale:"
msgstr "Importera skala:"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:160
msgid "Group items"
msgstr "Gruppföremål"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:161
msgid "Add all imported items into a new group"
msgstr "Lägg till alla importerade artiklar i en ny grupp"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:172
msgid "DXF Parameters"
msgstr "DXF-parametrar"
#: pcbnew/import_gfx/dialog_import_gfx_base.cpp:194
msgid "Default units:"
msgstr "Standard måttenheter:"
#: pcbnew/import_gfx/dialog_import_gfx_base.h:86
msgid "Import Vector Graphics File"
msgstr "Importera vektorgrafikfil"
#: pcbnew/import_gfx/dxf_import_plugin.cpp:134
msgid "Memory was exhausted trying to load the DXF, it may be too large."
msgstr "Minnet blev fullt vid försök att ladda DXF; den kan vara för stor."
#: pcbnew/import_gfx/dxf_import_plugin.cpp:1448
msgid "Invalid spline definition encountered"
msgstr "Ogiltig spline-definition påträffad"
#: pcbnew/initpcb.cpp:50
msgid ""
"Current Board will be lost and this operation cannot be undone. Continue?"
msgstr ""
"Aktuellt mönsterkort kommer gå förlorat och åtgärden kan inte ångras. Vill "
"du fortsätta?"
#: pcbnew/initpcb.cpp:109 pcbnew/tools/footprint_editor_control.cpp:189
msgid "The current footprint has been modified. Save changes?"
msgstr "Det aktuella fotavtrycket har modifierats. Spara ändringar?"
#: pcbnew/io_mgr.cpp:89
#, c-format
msgid "UNKNOWN (%d)"
msgstr "Okänt (%d)"
#: pcbnew/kicad_clipboard.cpp:460
msgid "Clipboard content is not KiCad compatible"
msgstr "Urklippsinnehåll är inte KiCad-kompatibelt"
#: pcbnew/load_select_footprint.cpp:267
#, c-format
msgid "Choose Footprint (%d items loaded)"
msgstr "Välj fotavtryck (%d föremål laddade)"
#: pcbnew/load_select_footprint.cpp:372
#, c-format
msgid "Footprints [%u items]"
msgstr "Fotavtryck [%u föremål]"
#: pcbnew/load_select_footprint.cpp:436
#, c-format
msgid "Footprint '%s' saved."
msgstr "Fotavtryck '%s' sparat."
#: pcbnew/load_select_footprint.cpp:446
#, c-format
msgid "Footprint library '%s' saved as '%s'."
msgstr "Fotavtrycksbibliotek '%s' sparat som '%s'."
#: pcbnew/menubar_footprint_editor.cpp:68
#: pcbnew/menubar_footprint_editor.cpp:77
msgid "Footprint..."
msgstr "Fotavtryck..."
#: pcbnew/menubar_footprint_editor.cpp:69 pcbnew/menubar_pcb_editor.cpp:117
msgid "Graphics..."
msgstr "&Grafik..."
#: pcbnew/menubar_footprint_editor.cpp:78
msgid "View as &PNG..."
msgstr "Aktuell vy som &PNG..."
#: pcbnew/menubar_footprint_editor.cpp:79
msgid "Create a PNG file from the current view"
msgstr "Skapa en PNG-fil från den aktuella vyn"
#: pcbnew/menubar_footprint_editor.cpp:150 pcbnew/menubar_pcb_editor.cpp:264
msgid "&Drawing Mode"
msgstr "& Ritningsläge"
#: pcbnew/menubar_footprint_editor.cpp:160 pcbnew/menubar_pcb_editor.cpp:289
msgid "&Contrast Mode"
msgstr "& Kontrastläge"
#: pcbnew/menubar_footprint_editor.cpp:218
msgid "&Load Footprint from PCB..."
msgstr "& Ladda fotavtryck från kretskort ..."
#: pcbnew/menubar_footprint_editor.cpp:219
msgid "Load a footprint from the current board into the editor"
msgstr "Ladda ett fotavtryck från det aktuella mönsterkortet i redigeraren"
#: pcbnew/menubar_footprint_editor.cpp:223
msgid "&Insert Footprint on PCB"
msgstr "&Sätt in fotavtryck på mönsterkortet"
#: pcbnew/menubar_footprint_editor.cpp:224
msgid "Insert footprint onto current board"
msgstr "Sätt in fotavtryck på det aktuella mönsterkortet"
#: pcbnew/menubar_pcb_editor.cpp:105
msgid "Resc&ue"
msgstr "Rädda"
#: pcbnew/menubar_pcb_editor.cpp:106
msgid "Clear board and get last rescue file automatically saved by PCB editor"
msgstr ""
"Rensa mönsterkort och hämta mönsterkortsredigerarens senaste automatiskt "
"sparade återhämtningsfil"
#: pcbnew/menubar_pcb_editor.cpp:116
msgid "Specctra Session..."
msgstr "Specctra Session ..."
#: pcbnew/menubar_pcb_editor.cpp:118
msgid "Non-KiCad Board File..."
msgstr "Icke-KiCad Board-fil ..."
#: pcbnew/menubar_pcb_editor.cpp:119
msgid "Import board file from other applications"
msgstr "Importera kortfil från andra applikationer"
#: pcbnew/menubar_pcb_editor.cpp:130
msgid "Specctra DSN..."
msgstr "Specctra DSN ..."
#: pcbnew/menubar_pcb_editor.cpp:131
msgid "GenCAD..."
msgstr "GenCAD ..."
#: pcbnew/menubar_pcb_editor.cpp:131
msgid "Export GenCAD board representation"
msgstr "Exportera GenCAD-mönsterkort"
#: pcbnew/menubar_pcb_editor.cpp:133
msgid "VRML..."
msgstr "VRML ..."
#: pcbnew/menubar_pcb_editor.cpp:133
msgid "Export VRML 3D board representation"
msgstr "Exportera VRML 3D-kortrepresentation"
#: pcbnew/menubar_pcb_editor.cpp:135
msgid "IDFv3..."
msgstr "IDFv3 ..."
#: pcbnew/menubar_pcb_editor.cpp:135
msgid "Export IDF 3D board representation"
msgstr "Exportera IDF 3D-kortrepresentation"
#: pcbnew/menubar_pcb_editor.cpp:137
msgid "STEP..."
msgstr "STEG..."
#: pcbnew/menubar_pcb_editor.cpp:137
msgid "Export STEP 3D board representation"
msgstr "Exportera STEP 3D-kortrepresentation"
#: pcbnew/menubar_pcb_editor.cpp:139
msgid "SVG..."
msgstr "SVG ..."
#: pcbnew/menubar_pcb_editor.cpp:139
msgid "Export SVG board representation"
msgstr "Exportera SVG-kortrepresentation"
#: pcbnew/menubar_pcb_editor.cpp:141
msgid "Footprint Association (.cmp) File..."
msgstr "Footprint Association (.cmp) -fil ..."
#: pcbnew/menubar_pcb_editor.cpp:142
msgid "Export footprint association file (*.cmp) for schematic back annotation"
msgstr ""
"Exportera associeringsfil för fotavtryck (*.cmp) för överföring av numrering "
"till kretsschema"
#: pcbnew/menubar_pcb_editor.cpp:144
msgid "Hyperlynx..."
msgstr "Hyperlynx ..."
#: pcbnew/menubar_pcb_editor.cpp:151
msgid "Footprints to Library..."
msgstr "Fotavtryck till bibliotek..."
#: pcbnew/menubar_pcb_editor.cpp:152
msgid ""
"Add footprints used on board to an existing footprint library\n"
"(does not remove other footprints from this library)"
msgstr ""
"Lägg till fotavtryck som används på mönsterkoret till ett befintligt "
"fotavtrycksbibliotek\n"
"(tar inte bort andra fotavtryck från detta bibliotek)"
#: pcbnew/menubar_pcb_editor.cpp:156
msgid "Footprints to New Library..."
msgstr "Fotavtryck till nytt bibliotek..."
#: pcbnew/menubar_pcb_editor.cpp:157
msgid ""
"Create a new footprint library containing the footprints used on board\n"
"(if the library already exists it will be replaced)"
msgstr ""
"Skapa ett nytt fotavtrycksbibliotek som innehåller de fotavtryck som används "
"på mönsterkortet\n"
"(om biblioteket redan finns kommer det att ersättas)"
#: pcbnew/menubar_pcb_editor.cpp:165
msgid "Fabrication Outputs"
msgstr "Tillverkningsutgångar"
#: pcbnew/menubar_pcb_editor.cpp:313
msgid "Add Microwave Shape"
msgstr "Lägg till mikrovågsform"
#: pcbnew/menubar_pcb_editor.cpp:350
msgid "Auto-Place Footprints"
msgstr "Automatiskt placera fotavtryck"
#: pcbnew/menubar_pcb_editor.cpp:412
msgid "Add Teardrops..."
msgstr "Lägg till kragförstärkningar..."
#: pcbnew/menubar_pcb_editor.cpp:413
msgid "Remove Teardrops"
msgstr "Ta bort kragförstärkningar"
#: pcbnew/menubar_pcb_editor.cpp:433
msgid "External Plugins"
msgstr "Externa insticksprogram"
#: pcbnew/menubar_pcb_editor.cpp:471
msgid "Ro&ute"
msgstr "Rutt"
#: pcbnew/microwave/microwave_footprint.cpp:56
msgid "Gap Size:"
msgstr "Gap Storlek:"
#: pcbnew/microwave/microwave_footprint.cpp:62
msgid "Stub Size:"
msgstr "Stub Storlek:"
#: pcbnew/microwave/microwave_footprint.cpp:69
msgid "Arc Stub Radius Value:"
msgstr "Arc Stub Radius Värde:"
#: pcbnew/microwave/microwave_footprint.cpp:80
#: pcbnew/microwave/microwave_footprint.cpp:94
msgid "Create Microwave Footprint"
msgstr "Skapa mikrovågsfotavtryck"
#: pcbnew/microwave/microwave_footprint.cpp:93
msgid "Angle in degrees:"
msgstr "Vinkel i grader:"
#: pcbnew/microwave/microwave_footprint.cpp:105
msgid "Incorrect number, abort"
msgstr "Felaktigt nummer, avbryt"
#: pcbnew/microwave/microwave_inductor.cpp:316
msgid "Add microwave inductor"
msgstr "Lägg till mikrovågsspole"
#: pcbnew/microwave/microwave_inductor.cpp:366
msgid "Length of Trace:"
msgstr "Ledarens längd:"
#: pcbnew/microwave/microwave_inductor.cpp:376
msgid "Requested length < minimum length"
msgstr "Begärd längd <minsta längd"
#: pcbnew/microwave/microwave_inductor.cpp:390
msgid "Requested length too large"
msgstr "Begärd längd för stor"
#: pcbnew/microwave/microwave_inductor.cpp:393
msgid "Requested length too small"
msgstr "Begärd längd för liten"
#: pcbnew/microwave/microwave_inductor.cpp:396
msgid "Requested length can't be represented"
msgstr "Begärd längd kan inte representeras"
#: pcbnew/microwave/microwave_inductor.cpp:404
msgid "Component Value:"
msgstr "Komponentvärde:"
#: pcbnew/microwave/microwave_polygon.cpp:111
msgid "Complex Shape"
msgstr "Komplex form"
#: pcbnew/microwave/microwave_polygon.cpp:128
msgid "Symmetrical"
msgstr "Symmetrisk"
#: pcbnew/microwave/microwave_polygon.cpp:136 pcbnew/pcb_target.cpp:155
#: pcbnew/pcb_target.cpp:199
msgid "Size"
msgstr "Storlek"
#: pcbnew/microwave/microwave_polygon.cpp:168
msgid "Read Shape Description File..."
msgstr "Läs formbeskrivningsfil ..."
#: pcbnew/microwave/microwave_polygon.cpp:210
msgid "Shape Description File"
msgstr "Formbeskrivningsfil"
#: pcbnew/microwave/microwave_polygon.cpp:314
msgid "Shape has a null size."
msgstr "Formen har en null storlek."
#: pcbnew/microwave/microwave_polygon.cpp:320
msgid "Shape has no points."
msgstr "Form har inga punkter."
#: pcbnew/microwave/microwave_tool.cpp:92
msgid "Place microwave feature"
msgstr "Placera mikrovågsfunktionen"
#: pcbnew/netinfo_item.cpp:135
msgid "On Board"
msgstr "På mönsterkortet"
#: pcbnew/netinfo_item.cpp:138
msgid "In Package"
msgstr "I paketet"
#: pcbnew/netlist_reader/board_netlist_updater.cpp:139
#, c-format
msgid "Cannot add %s (no footprint assigned)."
msgstr "Kan inte lägga till %s (inget fotavtryck tilldelat)."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:151
#, c-format
msgid "Cannot add %s (footprint '%s' not found)."
msgstr "Kunde inte lägga till %s (fotavtryck '%s' hittades inte)."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:161
#, c-format
msgid "Add %s (footprint '%s')."
msgstr "Lägg till %s (fotavtryck '%s')."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:191
#, c-format
msgid "Added %s (footprint '%s')."
msgstr "Lade till %s (fotavtryck '%s')."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:209
#, c-format
msgid "Cannot update %s (no footprint assigned)."
msgstr "Kan inte uppdatera %s (inget fotavtryck tilldelat)."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:221
#, c-format
msgid "Cannot update %s (footprint '%s' not found)."
msgstr "Kunde inte uppdatera %s (fotavtryck '%s' hittades inte)."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:231
#, c-format
msgid "Change %s footprint from '%s' to '%s'."
msgstr "Ändra fotavtryck %s från '%s' till '%s'."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:243
#, c-format
msgid "Changed %s footprint from '%s' to '%s'."
msgstr "Ändrade fotavtryck %s från '%s' till '%s'."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:276
#, c-format
msgid "Change %s reference designator to %s."
msgstr "Ändra %s referensbeteckning till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:282
#, c-format
msgid "Changed %s reference designator to %s."
msgstr "Ändrade %s referensbeteckning till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:298
#, c-format
msgid "Change %s value from %s to %s."
msgstr "Ändra %s -värdet från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:305
#, c-format
msgid "Changed %s value from %s to %s."
msgstr "Ändrade %s värde från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:327
#, c-format
msgid "Update %s symbol association from %s to %s."
msgstr "Uppdatera %s symbolassociation från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:334
#, c-format
msgid "Updated %s symbol association from %s to %s."
msgstr "Uppdaterade %s symbolassociation från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:350
#, c-format
msgid "Update %s properties."
msgstr "Uppdatera %s egenskaper."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:355
#, c-format
msgid "Updated %s properties."
msgstr "Uppdaterade %s egenskaper."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:372
#, c-format
msgid "Add %s 'exclude from BOM' fabrication attribute."
msgstr ""
"Lägg till tillverkningsattribut 'exkludera från komponentlista' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:377
#, c-format
msgid "Remove %s 'exclude from BOM' fabrication attribute."
msgstr "Ta bort tillverkningsattribut 'exkludera från komponentlista' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:388
#, c-format
msgid "Added %s 'exclude from BOM' fabrication attribute."
msgstr ""
"Lade till tillverkningsattribut 'exkludera från komponentlista' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:394
#, c-format
msgid "Removed %s 'exclude from BOM' fabrication attribute."
msgstr "Tog bort tillverkningsattribut 'exkludera från komponentlista' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:412
#, c-format
msgid "Add %s 'exclude from position files' fabrication attribute."
msgstr "Lägg till tillverkningsattribut 'exkludera från positionsfil' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:417
#, c-format
msgid "Remove %s 'exclude from position files' fabrication attribute."
msgstr "Ta bort tillverkningsattribut 'exkludera från positionsfil' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:428
#, c-format
msgid "Added %s 'exclude from position files' fabrication attribute."
msgstr "Lade till tillverkningsattribut 'exkludera från positionsfil' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:434
#, c-format
msgid "Removed %s 'exclude from position files' fabrication attribute."
msgstr "Tog bort tillverkningsattribut 'exkludera från positionsfil' för %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:510
#, c-format
msgid "Disconnect %s pin %s."
msgstr "Koppla bort %s stift %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:516
#, c-format
msgid "Disconnected %s pin %s."
msgstr "Kopplade bort %s stift %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:526
#, c-format
msgid "No net found for symbol %s pin %s."
msgstr "Inget nät hittat för symbol %s stift %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:578
#, c-format
msgid "Add net %s."
msgstr "Lägg till nät %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:588
#, c-format
msgid "Reconnect %s pin %s from %s to %s."
msgstr "Återanslut %s stift %s från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:596
#, c-format
msgid "Reconnected %s pin %s from %s to %s."
msgstr "Återanslöt %s stift %s från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:607
#, c-format
msgid "Connect %s pin %s to %s."
msgstr "Anslut %s stift %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:614
#, c-format
msgid "Connected %s pin %s to %s."
msgstr "Anslöt %s stift %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:693
#, c-format
msgid "Reconnect via from %s to %s."
msgstr "Återanslut via från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:711
#, c-format
msgid "Reconnected via from %s to %s."
msgstr "Återanslöt via från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:721
#, c-format
msgid "Via connected to unknown net (%s)."
msgstr "Via ansluten till okänt nät (%s)."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:764
#, c-format
msgid "Reconnect copper zone '%s' from %s to %s."
msgstr "Återanslut kopparzon '%s' från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:771
#, c-format
msgid "Reconnect copper zone from %s to %s."
msgstr "Anslut kopparzon igen från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:792
#, c-format
msgid "Reconnected copper zone '%s' from %s to %s."
msgstr "Återanslöt kopparzon '%s' från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:799
#, c-format
msgid "Reconnected copper zone from %s to %s."
msgstr "Återanslöt kopparzon från %s till %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:812
#, c-format
msgid "Copper zone '%s' has no pads connected."
msgstr "Kopparzon '%s' har inga lödytor anslutna."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:820
#, c-format
msgid "Copper zone on layer %s at (%s, %s) has no pads connected."
msgstr "Kopparzon på lager %s vid (%s, %s) har inga lödytor anslutna."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:861
#, c-format
msgid ""
"Symbol %s has pins with no number. These pins can not be matched to pads in "
"%s."
msgstr ""
"Symbol %s har stift utan nummer. Dessa stift kan inte matchas till lödytor "
"i %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:871
#, c-format
msgid "%s pad %s not found in %s."
msgstr "%s pad %s hittades inte i %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:923
#, c-format
msgid "Processing symbol '%s:%s'."
msgstr "Bearbetningssymbol '%s: %s'."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:992
#, c-format
msgid "Multiple footprints found for '%s'."
msgstr "Flera fotavtryck hittades för '%s'."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:1023
#, c-format
msgid "Cannot remove unused footprint %s (locked)."
msgstr "Det går inte att ta bort oanvänt fotavtryck %s (låst)."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:1028
#, c-format
msgid "Could not remove unused footprint %s (locked)."
msgstr "Kunde inte ta bort oanvänt fotavtryck %s (låst)."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:1041
#, c-format
msgid "Remove unused footprint %s."
msgstr "Ta bort oanvänt fotavtryck %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:1046
#, c-format
msgid "Removed unused footprint %s."
msgstr "Tog bort oanvänt fotavtryck %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:1073
#, c-format
msgid "Removed unused net %s."
msgstr "Tog bort oanvänt nät %s."
#: pcbnew/netlist_reader/board_netlist_updater.cpp:1086
msgid "Update netlist"
msgstr "Uppdatera netlista"
#: pcbnew/netlist_reader/board_netlist_updater.cpp:1104
#, c-format
msgid "Total warnings: %d, errors: %d."
msgstr "Totalt antal varningar: %d, fel: %d."
#: pcbnew/netlist_reader/kicad_netlist_reader.cpp:270
#, c-format
msgid "Cannot find component with ref '%s' in netlist."
msgstr "Det går inte att hitta komponenten med ref '%s' i netlist."
#: pcbnew/netlist_reader/kicad_netlist_reader.cpp:438
#, c-format
msgid ""
"Invalid footprint ID in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d"
msgstr ""
"Ogiltigt fotavtryck-ID i\n"
"fil: '%s'\n"
"rad: %d\n"
"förskjutning: %d"
#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:118
msgid "Cannot parse time stamp in symbol section of netlist."
msgstr "Kan inte tolka tidsstämpel i nätlistans symbolavsnitt."
#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:128
msgid "Cannot parse footprint name in symbol section of netlist."
msgstr "Kan inte tolka fotavtrycksnamnet i nätlistans symbolavsnitt."
#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:142
msgid "Cannot parse reference designator in symbol section of netlist."
msgstr "Kan inte tolka referensbeteckningen i nätlistans symbolavsnitt."
#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:152
msgid "Cannot parse value in symbol section of netlist."
msgstr "Kan inte tolka värdet i nätlistans symbolavsnitt."
#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:189
msgid "Cannot parse pin name in symbol net section of netlist."
msgstr "Kan inte tolka stiftnamnet i nätlistans avsnitt för symbolnät."
#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:198
msgid "Cannot parse net name in symbol net section of netlist."
msgstr "Kan inte tolka nätnamnet i nätlistans avsnitt för symbolnät."
#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:246
#, c-format
msgid "Cannot find symbol %s in footprint filter section of netlist."
msgstr ""
"Kunde inte hitta symbol %s i avsnittet om fotavtrycksfilter i nätlistan."
#: pcbnew/netlist_reader/netlist.cpp:62
#, c-format
msgid "Cannot open netlist file '%s'."
msgstr "Kunde inte öppna nätlistefilen '%s'."
#: pcbnew/netlist_reader/netlist.cpp:63
msgid "Netlist Load Error."
msgstr "Fel på Netlist Load."
#: pcbnew/netlist_reader/netlist.cpp:73
#, c-format
msgid ""
"Error loading netlist.\n"
"%s"
msgstr ""
"Fel vid inläsning av netlista.\n"
"%s"
#: pcbnew/netlist_reader/netlist.cpp:74
msgid "Netlist Load Error"
msgstr "Fel på Netlist Load"
#: pcbnew/netlist_reader/netlist.cpp:162
#, c-format
msgid "No footprint defined for symbol %s."
msgstr "Inget fotavtryck definierat för symbol %s."
#: pcbnew/netlist_reader/netlist.cpp:189
#, c-format
msgid "Footprint of %s changed: board footprint '%s', netlist footprint '%s'."
msgstr "Fotavtryck av %s har ändrats: kortavtryck '%s', nätlistavtryck '%s'."
#: pcbnew/netlist_reader/netlist.cpp:212
#, c-format
msgid "%s footprint ID '%s' is not valid."
msgstr "%s fotavtryck-ID '%s' är inte giltigt."
#: pcbnew/netlist_reader/netlist.cpp:229
#, c-format
msgid ""
"%s footprint '%s' not found in any libraries in the footprint library table."
msgstr ""
"%s fotavtryck '%s' hittades inte i några bibliotek i tabellen för "
"fotavtrycksbibliotek."
#: pcbnew/netlist_reader/netlist_reader.cpp:184
#, c-format
msgid ""
"Invalid footprint ID in\n"
"file: '%s'\n"
"line: %d"
msgstr ""
"Ogiltigt fotavtrycks-ID i\n"
"fil: '%s'\n"
"rad: %d"
#: pcbnew/pad.cpp:789 pcbnew/pad.cpp:919 pcbnew/pad.cpp:928 pcbnew/pad.cpp:937
msgid "pad"
msgstr "lödyta"
#: pcbnew/pad.cpp:957 pcbnew/pad.cpp:1767
msgid "Pin Name"
msgstr "Pin-namn"
#: pcbnew/pad.cpp:960 pcbnew/pad.cpp:1769
msgid "Pin Type"
msgstr "Stifttyp"
#: pcbnew/pad.cpp:985
msgid "BGA"
msgstr "BGA"
#: pcbnew/pad.cpp:986
msgid "Fiducial global"
msgstr "Global referenspunkt"
#: pcbnew/pad.cpp:987
msgid "Fiducial local"
msgstr "Lokal referenspunkt"
#: pcbnew/pad.cpp:988
msgid "Test point"
msgstr "Testpunkt"
#: pcbnew/pad.cpp:989
msgid "Heat sink"
msgstr "Kylfläns"
#: pcbnew/pad.cpp:990
msgid "Castellated"
msgstr "Krenelerad"
#: pcbnew/pad.cpp:1019
msgid "Length in Package"
msgstr "Längd i kapslingen"
#: pcbnew/pad.cpp:1033
msgid "Hole X / Y"
msgstr "Hål X / Y"
#: pcbnew/pad.cpp:1045 pcbnew/pcb_track.cpp:873 pcbnew/pcb_track.cpp:918
#: pcbnew/router/router_tool.cpp:2536 pcbnew/router/router_tool.cpp:2553
#: pcbnew/zone.cpp:608
#, c-format
msgid "Min Clearance: %s"
msgstr "Min. Avstånd: %s"
#: pcbnew/pad.cpp:1047 pcbnew/pcb_track.cpp:875 pcbnew/pcb_track.cpp:884
#: pcbnew/pcb_track.cpp:890 pcbnew/pcb_track.cpp:920 pcbnew/pcb_track.cpp:926
#: pcbnew/router/router_tool.cpp:2533 pcbnew/router/router_tool.cpp:2538
#: pcbnew/router/router_tool.cpp:2543 pcbnew/router/router_tool.cpp:2550
#: pcbnew/router/router_tool.cpp:2555 pcbnew/zone.cpp:610
#, c-format
msgid "(from %s)"
msgstr "(från %s)"
#: pcbnew/pad.cpp:1207
msgid "Trap"
msgstr "Fälla"
#: pcbnew/pad.cpp:1208
msgid "Roundrect"
msgstr "Rundad rektangel"
#: pcbnew/pad.cpp:1209
msgid "Chamferedrect"
msgstr "Fasad rektangel"
#: pcbnew/pad.cpp:1210
msgid "CustomShape"
msgstr "Anpassad form"
#: pcbnew/pad.cpp:1222
msgid "Conn"
msgstr "Kontakt"
#: pcbnew/pad.cpp:1235
#, c-format
msgid "Pad %s of %s on %s"
msgstr "Lödyta %s av %s på %s"
#: pcbnew/pad.cpp:1242
#, c-format
msgid "NPTH pad of %s"
msgstr "NPTH-yta (ej genompläterat hål) tillhörande %s"
#: pcbnew/pad.cpp:1246
#, c-format
msgid "PTH pad %s of %s"
msgstr "PTH-lödyta (genompläterat hål) %s tillhörande %s"
#: pcbnew/pad.cpp:1255
#, c-format
msgid "Pad %s %s of %s on %s"
msgstr "Lödyta %s %s av %s på %s"
#: pcbnew/pad.cpp:1263
#, c-format
msgid "NPTH of %s"
msgstr "NPTH (icke genompläterat hål) tillhörande %s"
#: pcbnew/pad.cpp:1267
#, c-format
msgid "PTH pad %s %s of %s"
msgstr "PTH-lödyta (genompläterat hål) %s %s tillhörande %s"
#: pcbnew/pad.cpp:1692
msgid "Edge connector"
msgstr "Kantkontakt"
#: pcbnew/pad.cpp:1693
msgid "NPTH, mechanical"
msgstr "NPTH, mekanisk"
#: pcbnew/pad.cpp:1699
msgid "Trapezoid"
msgstr "Trapes"
#: pcbnew/pad.cpp:1711
msgid "Castellated pad"
msgstr "Krenelerad lödyta"
#: pcbnew/pad.cpp:1751
msgid "Pad Type"
msgstr "Lödytetyp"
#: pcbnew/pad.cpp:1762
msgid "Pad Number"
msgstr "Lödytenummer"
#: pcbnew/pad.cpp:1772
msgid "Size X"
msgstr "Storlek X"
#: pcbnew/pad.cpp:1775
msgid "Size Y"
msgstr "Storlek Y"
#: pcbnew/pad.cpp:1779
msgid "Round Radius Ratio"
msgstr "Runt radieförhållande"
#: pcbnew/pad.cpp:1788
msgid "Hole Size X"
msgstr "Hålstorlek X"
#: pcbnew/pad.cpp:1791
msgid "Hole Size Y"
msgstr "Hålstorlek Y"
#: pcbnew/pad.cpp:1795
msgid "Fabrication Property"
msgstr "Tillverkningsegenskap"
#: pcbnew/pad.cpp:1798 pcbnew/pcb_track.cpp:863
msgid "Pad To Die Length"
msgstr "Längd lödyta till chip"
#: pcbnew/pad.cpp:1809
msgid "Soldermask Margin Override"
msgstr "Lokalt värde för lödmaskens frigång"
#: pcbnew/pad.cpp:1821 pcbnew/zone.cpp:1485
msgid "Thermal Relief Spoke Width"
msgstr "Ekerbredd för termisk avlastning"
#: pcbnew/pad.cpp:1824
msgid "Thermal Relief Spoke Angle"
msgstr "Ekerriktning för termisk avlastning"
#: pcbnew/pad.cpp:1827 pcbnew/zone.cpp:1480
msgid "Thermal Relief Gap"
msgstr "Gap i termisk avlastning"
#: pcbnew/pcb_base_frame.cpp:194
msgid "Error loading project footprint libraries."
msgstr "Fel vid inläsning av projektets fotavtrycksbibliotek."
#: pcbnew/pcb_bitmap.cpp:232
msgid "Bitmap Properties"
msgstr "Bitmappegenskaper"
#: pcbnew/pcb_bitmap.cpp:239
msgid "Greyscale"
msgstr "Gråskala"
#: pcbnew/pcb_dimension.cpp:298
msgid "Prefix"
msgstr "Prefix"
#: pcbnew/pcb_dimension.cpp:302 pcbnew/pcb_dimension.cpp:1306
msgid "Override Text"
msgstr "Undantag för text"
#: pcbnew/pcb_dimension.cpp:320
msgid "Suffix"
msgstr "Postfix"
#: pcbnew/pcb_dimension.cpp:453
#, c-format
msgid "Dimension '%s' on %s"
msgstr "Dimension '%s' på %s"
#: pcbnew/pcb_edit_frame.cpp:202
msgid "KiCad PCB Editor"
msgstr "KiCad mönsterkortsredigerare"
#: pcbnew/pcb_edit_frame.cpp:208
msgid "Export netlist used to update schematics"
msgstr "Exportera nätlista för uppdatering av kretsschema"
#: pcbnew/pcb_edit_frame.cpp:308
msgid "Search"
msgstr "Sök"
#: pcbnew/pcb_edit_frame.cpp:392
msgid "New PCB file is unsaved"
msgstr "Ny PCB-fil sparas inte"
#: pcbnew/pcb_edit_frame.cpp:1108
#, c-format
msgid "The auto save file '%s' could not be removed!"
msgstr "Det gick inte att ta bort autospar-filen '%s'!"
#: pcbnew/pcb_edit_frame.cpp:1411
msgid "Board file is read only."
msgstr "Mönsterkortsfilen är skrivskyddad."
#: pcbnew/pcb_edit_frame.cpp:1446
msgid "PCB file changes are unsaved"
msgstr "PCB-filändringar sparas inte"
#: pcbnew/pcb_edit_frame.cpp:1745
msgid "The schematic for this board cannot be found."
msgstr "Kretsschemat för detta mönsterkort kan inte hittas."
#: pcbnew/pcb_edit_frame.cpp:1769
msgid ""
"Cannot update the PCB because PCB editor is opened in stand-alone mode. In "
"order to create or update PCBs from schematics, you must launch the KiCad "
"project manager and create a project."
msgstr ""
"Kunde inte uppdatera mönsterkortet eftersom mönsterkortsredigeraren är "
"öppnad i fristående läge. För att skapa eller uppdatera mönsterkort från "
"kretsschema måste du starta KiCads projekthanterare och skapa ett projekt."
#: pcbnew/pcb_edit_frame.cpp:1794
msgid "Eeschema netlist"
msgstr "Eeschema-nätlista"
#: pcbnew/pcb_edit_frame.cpp:1805
msgid ""
"Received an error while reading netlist. Please report this issue to the "
"KiCad team using the menu Help->Report Bug."
msgstr ""
"Stötte på ett fel under inläsning av nätlistan. Vänligen rapportera detta "
"problem till KiCad-teamet genom menyn Hjälp -> Rapportera fel."
#: pcbnew/pcb_edit_frame.cpp:1832
#, c-format
msgid "Schematic file '%s' not found."
msgstr "Kretsschemafil '%s' hittades inte."
#: pcbnew/pcb_edit_frame.cpp:1862
msgid "Eeschema failed to load."
msgstr "Eeschema kunde inte ladda."
#: pcbnew/pcb_edit_frame.cpp:2026
msgid "Edit design rules"
msgstr "Ändra designregler"
#: pcbnew/pcb_edit_frame.cpp:2038
msgid "Could not compile custom design rules."
msgstr "Kunde inte kompilera anpassade designregler."
#: pcbnew/pcb_edit_frame.cpp:2076
msgid "Export Hyperlynx Layout"
msgstr "Exportera Hyperlynx Layout"
#: pcbnew/pcb_expr_evaluator.cpp:302
msgid "must be mm, in, or mil"
msgstr "måste vara mm, in eller mil"
#: pcbnew/pcb_expr_functions.cpp:74
#, c-format
msgid "Missing layer name argument to %s."
msgstr "Argumentet lagernamn saknas för %s."
#: pcbnew/pcb_expr_functions.cpp:127
#, c-format
msgid "Unrecognized layer '%s'"
msgstr "Okänt lager \"%s\""
#: pcbnew/pcb_expr_functions.cpp:240
#, c-format
msgid "Missing footprint argument (A, B, or reference designator) to %s."
msgstr "Argument för fotavtryck (A, B eller referensbeteckning) saknas för %s."
#: pcbnew/pcb_expr_functions.cpp:446
msgid "Footprint's courtyard is not a single, closed shape."
msgstr "Footprint gård är inte en enda, stängd form."
#: pcbnew/pcb_expr_functions.cpp:458
msgid "Footprint has no front courtyard."
msgstr "Fotavtryck har ingen innergård."
#: pcbnew/pcb_expr_functions.cpp:475
msgid "Footprint has no back courtyard."
msgstr "Footprint har ingen bakgård."
#: pcbnew/pcb_expr_functions.cpp:593
#, c-format
msgid "Missing rule-area argument (A, B, or rule-area name) to %s."
msgstr "Saknat argument för regelytan (A, B eller regelytans namn) för %s."
#: pcbnew/pcb_expr_functions.cpp:744
#, c-format
msgid "Missing group name argument to %s."
msgstr "Argumentet gruppnamn saknas för %s."
#: pcbnew/pcb_expr_functions.cpp:858
#, c-format
msgid "Missing diff-pair name argument to %s."
msgstr "Argumentet differentialpars namn saknas för %s."
#: pcbnew/pcb_expr_functions.cpp:922
#, c-format
msgid "Missing field name argument to %s."
msgstr "Argumentet fältnamn saknas för %s."
#: pcbnew/pcb_group.cpp:385
#, c-format
msgid "Unnamed Group, %zu members"
msgstr "Namnlösa Group, %zu medlemmar"
#: pcbnew/pcb_group.cpp:387
#, c-format
msgid "Group '%s', %zu members"
msgstr "Grupp '%s', %zu-medlemmar"
#: pcbnew/pcb_group.cpp:399
msgid "<unnamed>"
msgstr "<namn>"
#: pcbnew/pcb_group.cpp:400
msgid "Members"
msgstr "Medlemmar"
#: pcbnew/pcb_layer_box_selector.cpp:98
msgid "(not activated)"
msgstr "(inte aktiverad)"
#: pcbnew/pcb_marker.cpp:194
msgid "Violation"
msgstr "Överträdelse"
#: pcbnew/pcb_marker.cpp:199 pcbnew/pcb_marker.cpp:202
#: pcbnew/pcb_marker.cpp:205
msgid "Severity"
msgstr "Allvarlighet"
#: pcbnew/pcb_marker.cpp:263
#, c-format
msgid "Marker (%s)"
msgstr "Markör (%s)"
#: pcbnew/pcb_shape.cpp:304
msgid "Drawing"
msgstr "Ritning"
#: pcbnew/pcb_target.cpp:151
msgid "PCB Target"
msgstr "PCB-mål"
#: pcbnew/pcb_text.cpp:131
msgid "PCB Text"
msgstr "PCB-text"
#: pcbnew/pcb_text.cpp:257
#, c-format
msgid "PCB Text '%s' on %s"
msgstr "PCB-text '%s' på %s"
#: pcbnew/pcb_textbox.cpp:418
#, c-format
msgid "PCB Text Box on %s"
msgstr "Mönsterkorts textruta på %s"
#: pcbnew/pcb_track.cpp:111
#, c-format
msgid "Blind/Buried Via %s on %s"
msgstr "Blind / begravd via %s på %s"
#: pcbnew/pcb_track.cpp:112
#, c-format
msgid "Micro Via %s on %s"
msgstr "Micro Via %s på %s"
#: pcbnew/pcb_track.cpp:113
#, c-format
msgid "Via %s on %s"
msgstr "Via %s på %s"
#: pcbnew/pcb_track.cpp:166
msgid "removed annular ring"
msgstr "borttagen ringring"
#: pcbnew/pcb_track.cpp:824
msgid "Track (arc)"
msgstr "Ledare (båge)"
#: pcbnew/pcb_track.cpp:847
msgid "Segment Length"
msgstr "Segmentlängd"
#: pcbnew/pcb_track.cpp:858
msgid "Routed Length"
msgstr "Dragen längd"
#: pcbnew/pcb_track.cpp:866
msgid "Full Length"
msgstr "Full längd"
#: pcbnew/pcb_track.cpp:881
#, c-format
msgid "Width Constraints: min %s, max %s"
msgstr "Breddbegränsningar: min %s, max %s"
#: pcbnew/pcb_track.cpp:888
#, c-format
msgid "Width Constraints: min %s"
msgstr "Breddbegränsning: min %s"
#: pcbnew/pcb_track.cpp:901
msgid "Micro Via"
msgstr "Mikrovia"
#: pcbnew/pcb_track.cpp:902
msgid "Blind/Buried Via"
msgstr "Blind / begravd via"
#: pcbnew/pcb_track.cpp:903
msgid "Through Via"
msgstr "Genom Via"
#: pcbnew/pcb_track.cpp:924
#, c-format
msgid "Min Annular Width: %s"
msgstr "Min ringformad bredd: %s"
#: pcbnew/pcb_track.cpp:940
msgid "NetCode"
msgstr "Nätkod"
#: pcbnew/pcb_track.cpp:1069
#, c-format
msgid "Track (arc) %s on %s, length %s"
msgstr "Ledare (båge) %s på %s, längd %s"
#: pcbnew/pcb_track.cpp:1070
#, c-format
msgid "Track %s on %s, length %s"
msgstr "Ledare %s på %s, längd %s"
#: pcbnew/pcb_track.cpp:1271
msgid "Via Properties"
msgstr "Viaegenskaper"
#: pcbnew/pcb_track.cpp:1281 pcbnew/widgets/pcb_properties_panel.cpp:187
msgid "Layer Top"
msgstr "Övre lager"
#: pcbnew/pcb_track.cpp:1283 pcbnew/widgets/pcb_properties_panel.cpp:188
msgid "Layer Bottom"
msgstr "Undre lager"
#: pcbnew/pcb_track.cpp:1285
msgid "Via Type"
msgstr "Via typ"
#: pcbnew/pcbnew.cpp:376
msgid ""
"An error occurred attempting to load the global footprint library table.\n"
"Please edit this global footprint library table in Preferences menu."
msgstr ""
"Ett fel inträffade när du försökte ladda den globala tabellen för "
"fotavtryck.\n"
"Redigera denna globala tabell för biblioteksavtryck i inställningsmenyn."
#: pcbnew/pcbnew_jobs_handler.cpp:83 pcbnew/pcbnew_jobs_handler.cpp:135
#: pcbnew/pcbnew_jobs_handler.cpp:159 pcbnew/pcbnew_jobs_handler.cpp:215
#: pcbnew/pcbnew_jobs_handler.cpp:261 pcbnew/pcbnew_jobs_handler.cpp:363
#: pcbnew/pcbnew_jobs_handler.cpp:408 pcbnew/pcbnew_jobs_handler.cpp:505
msgid "Loading board\n"
msgstr "Läser in mönsterkort\n"
#: pcbnew/pcbnew_jobs_handler.cpp:142
msgid "Successfully created svg file"
msgstr "Lyckades skapa svg-fil"
#: pcbnew/pcbnew_jobs_handler.cpp:144 pcbnew/pcbnew_jobs_handler.cpp:748
msgid "Error creating svg file"
msgstr "Fel vid försök att skapa svg-fil"
#: pcbnew/pcbnew_jobs_handler.cpp:578 pcbnew/pcbnew_jobs_handler.cpp:649
msgid "Loading footprint library\n"
msgstr "Läser in fotavtrycksbibliotek\n"
#: pcbnew/pcbnew_jobs_handler.cpp:615
msgid "Saving footprint library\n"
msgstr "Sparar fotavtrycksbibliotek\n"
#: pcbnew/pcbnew_jobs_handler.cpp:634
msgid "Footprint library was not updated\n"
msgstr "Fotavtrycksbiblioteket uppdaterades inte\n"
#: pcbnew/pcbnew_jobs_handler.cpp:699
msgid "The given footprint could not be found to export."
msgstr "Fotavtrycket som skulle exporteras, kunde inte hittas."
#: pcbnew/pcbnew_jobs_handler.cpp:734
#, c-format
msgid "Plotting footprint '%s' to '%s'\n"
msgstr "Plottar fotavtryck '%s' till '%s'\n"
#: pcbnew/pcbnew_printout.cpp:113
msgid "Multiple Layers"
msgstr "Flera lager"
#: pcbnew/plugin.cpp:149
msgid "Enable <b>debug</b> logging for Footprint*() functions in this PLUGIN."
msgstr ""
"Aktivera <b> debug </b> -loggning för Footprint * () -funktioner i denna "
"PLUGIN."
#: pcbnew/plugin.cpp:152
msgid "Regular expression <b>footprint name</b> filter."
msgstr "Regeluttryck <b> filter för fotavtryck </b>."
#: pcbnew/plugin.cpp:170
msgid ""
"Enter the python module which implements the PLUGIN::Footprint*() functions."
msgstr ""
"Ange pythonmodulen som implementerar funktionerna PLUGIN :: Footprint * ()."
#: pcbnew/plugins/altium/altium_designer_plugin.cpp:152
#: pcbnew/plugins/altium/altium_pcb.cpp:555
#: pcbnew/plugins/altium/altium_pcb.cpp:682
#: pcbnew/plugins/altium/altium_pcb.cpp:711
#, c-format
msgid "File not found: '%s'."
msgstr "Filen hittades inte: '%s'."
#: pcbnew/plugins/altium/altium_parser_pcb.cpp:134
#, c-format
msgid "Unknown mapping of the Altium layer '%s'."
msgstr "Okänd mappning för Altium-lagret '%s'."
#: pcbnew/plugins/altium/altium_parser_pcb.cpp:182
#, c-format
msgid "Unknown Mode string: '%s'."
msgstr "Okänd Mode-sträng: '%s'."
#: pcbnew/plugins/altium/altium_parser_pcb.cpp:209
#, c-format
msgid "Unknown Record name string: '%s'."
msgstr "Okänd Record name-sträng: '%s'."
#: pcbnew/plugins/altium/altium_parser_pcb.cpp:223
#, c-format
msgid "Unknown Extended Primitive Information type: '%s'."
msgstr "Okänd Extended Primitive Information-typ: '%s'."
#: pcbnew/plugins/altium/altium_parser_pcb.cpp:784
#, c-format
msgid "Pads6 stream has unexpected length for subrecord 6: %d."
msgstr "Pads6-ström har oväntad längd för subrecord 6: %d."
#: pcbnew/plugins/altium/altium_pcb.cpp:327
#, c-format
msgid ""
"Altium layer (%d) has no KiCad equivalent. It has been moved to KiCad layer "
"Eco1_User."
msgstr ""
"Altium-lager (%d) saknar motsvarighet i KiCad. Det har flyttats till KiCad-"
"lager Eco1_User."
#: pcbnew/plugins/altium/altium_pcb.cpp:363
#: pcbnew/plugins/eagle/eagle_plugin.cpp:344
#: pcbnew/plugins/eagle/eagle_plugin.cpp:386
#: pcbnew/plugins/fabmaster/fabmaster_plugin.cpp:78
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:72
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2375
#: pcbnew/plugins/legacy/legacy_plugin.cpp:213
#: pcbnew/plugins/legacy/legacy_plugin.cpp:443
msgid "Open cancelled by user."
msgstr "Öppning avbruten av användare."
#: pcbnew/plugins/altium/altium_pcb.cpp:512
#, c-format
msgid "'%s' was not parsed correctly."
msgstr "'%s' tolkades inte korrekt."
#: pcbnew/plugins/altium/altium_pcb.cpp:520
#, c-format
msgid "'%s' was not fully parsed."
msgstr "'%s' tolkades inte fullständigt."
#: pcbnew/plugins/altium/altium_pcb.cpp:784
#, c-format
msgid "Record of unknown type: '%d'."
msgstr "Post av okänd typ: %d."
#: pcbnew/plugins/altium/altium_pcb.cpp:874
msgid "Loading extended primitive information data..."
msgstr "Läser in extended primitive information data..."
#: pcbnew/plugins/altium/altium_pcb.cpp:895
msgid "Loading board data..."
msgstr "Läser in mönsterkortsdata..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1075
msgid "Loading netclasses..."
msgstr "Läser in nätklasser..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1101
#, c-format
msgid "Duplicate netclass name '%s'."
msgstr "Dublett av nätklassnamn '%s'."
#: pcbnew/plugins/altium/altium_pcb.cpp:1120
msgid "Loading components..."
msgstr "Läser in komponenter..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1181
msgid "Loading component 3D models..."
msgstr "Läser in 3D-modeller..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1260
#: pcbnew/plugins/altium/altium_pcb.cpp:1356
#: pcbnew/plugins/altium/altium_pcb.cpp:1433
#: pcbnew/plugins/altium/altium_pcb.cpp:1511
#: pcbnew/plugins/altium/altium_pcb.cpp:1535
#, c-format
msgid ""
"Dimension found on an Altium layer (%d) with no KiCad equivalent. It has "
"been moved to KiCad layer Eco1_User."
msgstr ""
"Måttsättning hittad på ett Altium-lager (%d) som saknar motsvarighet i "
"KiCad. Den har flyttats till KiCad-lager Eco1_User."
#: pcbnew/plugins/altium/altium_pcb.cpp:1557
msgid "Loading dimension drawings..."
msgstr "Läser in måttritningar..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1578
#: pcbnew/plugins/altium/altium_pcb.cpp:1585
#, c-format
msgid "Ignored dimension of kind %d (not yet supported)."
msgstr "Ignorerade måttsättning av typ %d (stöds inte ännu)."
#: pcbnew/plugins/altium/altium_pcb.cpp:1626
msgid "No 3D-models will be imported."
msgstr "Inga 3D-modeller kommer importeras."
#: pcbnew/plugins/altium/altium_pcb.cpp:1655
#, c-format
msgid "File not found: '%s'. 3D-model not imported."
msgstr "Filen hittades inte: '%s'. 3D-modell inte importerad."
#: pcbnew/plugins/altium/altium_pcb.cpp:1693
msgid "Loading nets..."
msgstr "Läser in nät..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1717
msgid "Loading polygons..."
msgstr "Läser in polygoner..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1841
msgid "Loading rules..."
msgstr "Läser in regler..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1871
msgid "Loading board regions..."
msgstr "Läser in kortregioner..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1891
msgid "Loading zones..."
msgstr "Läser in zoner..."
#: pcbnew/plugins/altium/altium_pcb.cpp:1964
#: pcbnew/plugins/altium/altium_pcb.cpp:2010
#, c-format
msgid "Ignored polygon shape of kind %d (not yet supported)."
msgstr "Ignorerade polygon-form av typ %d (inte stödd ännu)."
#: pcbnew/plugins/altium/altium_pcb.cpp:2071
msgid "Loading zone fills..."
msgstr "Läser in zonfyllningar..."
#: pcbnew/plugins/altium/altium_pcb.cpp:2152
msgid "Loading arcs..."
msgstr "Läser in bågar..."
#: pcbnew/plugins/altium/altium_pcb.cpp:2357
msgid "Loading pads..."
msgstr "Läser in lödytor..."
#: pcbnew/plugins/altium/altium_pcb.cpp:2442
#, c-format
msgid "Footprint %s pad %s is not marked as multilayer, but is a TH pad."
msgstr ""
"Fotavtryck %s lödyta %s är inte angiven som flerlager-element, men är ett "
"hålmonteringshål."
#: pcbnew/plugins/altium/altium_pcb.cpp:2463
#, c-format
msgid "Footprint %s pad %s has a square hole (not yet supported)."
msgstr "Fotavtryck %s lödyta %s har ett fyrkantigt hål (stöds inte ännu)."
#: pcbnew/plugins/altium/altium_pcb.cpp:2490
#, c-format
msgid ""
"Footprint %s pad %s has a hole-rotation of %f degrees. KiCad only supports "
"90 degree rotations."
msgstr ""
"Fotavtryck %s lödyta %s har en hålrotation på %f grader. KiCad stöder bara "
"rotationer på 90 grader."
#: pcbnew/plugins/altium/altium_pcb.cpp:2502
#, c-format
msgid "Footprint %s pad %s uses a hole of unknown kind %d."
msgstr "Fotavtryck %s lödyta %s använder ett hål av okänd typ %d."
#: pcbnew/plugins/altium/altium_pcb.cpp:2519
#, c-format
msgid "Footprint %s pad %s uses a complex pad stack (not yet supported.)"
msgstr ""
"Fotavtryck %s har en lödyta %s som använder en komplex kragstapel, vilket "
"inte stöds ännu."
#: pcbnew/plugins/altium/altium_pcb.cpp:2556
#, c-format
msgid "Footprint %s pad %s uses an unknown pad-shape."
msgstr "Fotavtryck %s lödyta %s använder en okänd lödyte-form."
#: pcbnew/plugins/altium/altium_pcb.cpp:2614
#: pcbnew/plugins/altium/altium_pcb.cpp:2635
#, c-format
msgid ""
"Non-copper pad %s found on an Altium layer (%d) with no KiCad equivalent. It "
"has been moved to KiCad layer Eco1_User."
msgstr ""
"Koppar-fri lödyta %s hittad på ett Altium-lager (%d) utan någon motsvarighet "
"i KiCad. Lödytan har flyttats till KiCad-lagret Eco1_User."
#: pcbnew/plugins/altium/altium_pcb.cpp:2655
#, c-format
msgid "Non-copper pad %s is connected to a net, which is not supported."
msgstr "Koppar-fria lödytan %s är kopplad till ett nät, vilket inte stöds."
#: pcbnew/plugins/altium/altium_pcb.cpp:2661
#, c-format
msgid "Non-copper pad %s has a hole, which is not supported."
msgstr "Kopparfri lödyta '%s' har ett hål, vilket inte stöds."
#: pcbnew/plugins/altium/altium_pcb.cpp:2666
#, c-format
msgid "Non-copper pad %s has a complex pad stack (not yet supported)."
msgstr "Kopparfri lödyta %s har en komplex kragstapel, vilket inte stöds ännu."
#: pcbnew/plugins/altium/altium_pcb.cpp:2808
#, c-format
msgid "Non-copper pad %s uses an unknown pad-shape."
msgstr "Koppar-fria lödytan %s använder en okänd lödyte-form."
#: pcbnew/plugins/altium/altium_pcb.cpp:2818
msgid "Loading vias..."
msgstr "Läser in vior..."
#: pcbnew/plugins/altium/altium_pcb.cpp:2859
#, c-format
msgid ""
"Via from layer %d to %d uses a non-copper layer, which is not supported."
msgstr ""
"Via från lager %d till %d använder ett koppar-fritt lager, vilket inte stöds."
#: pcbnew/plugins/altium/altium_pcb.cpp:2878
msgid "Loading tracks..."
msgstr "Läser in ledare..."
#: pcbnew/plugins/altium/altium_pcb.cpp:3048
msgid "Loading unicode strings..."
msgstr "Läser in Unicode-strängar..."
#: pcbnew/plugins/altium/altium_pcb.cpp:3062
msgid "Loading text..."
msgstr "Läser in text..."
#: pcbnew/plugins/altium/altium_pcb.cpp:3091
#: pcbnew/plugins/altium/altium_pcb.cpp:3104
#, c-format
msgid "Ignored barcode on Altium layer %d (not yet supported)."
msgstr "Ignorerade streckkod på Altium-lagret %d (stöds inte ännu)."
#: pcbnew/plugins/altium/altium_pcb.cpp:3253
msgid "Loading rectangles..."
msgstr "Läser in rektanglar..."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:92
msgid ""
"The selected file indicates that nets might be out of synchronisation with "
"the schematic. It is recommended that you carry out an 'Align Nets' "
"procedure in CADSTAR and re-import, to avoid inconsistencies between the PCB "
"and the schematic. "
msgstr ""
"Den valda filen indikerar att nät kan vara ur synkronisering med schemat. "
"Det rekommenderas att du utför ett \"Align Nets\" -förfarande i CADSTAR och "
"återimporterar för att undvika inkonsekvenser mellan kretskortet och "
"schemat. "
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:132
#, c-format
msgid ""
"Unable to determine zone fill priorities for layer '%s'. A best attempt has "
"been made but it is possible that DRC errors exist and that manual editing "
"of the zone priorities is required."
msgstr ""
"Kunde inte bestämma zonfyllningsprioritet för lager '%s'. Ett bästa försök "
"har gjorts men det är möjligt att detta orsakat DRC-fel, och att manuell "
"ändring av zonernas prioritet behövs."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:146
msgid ""
"The CADSTAR design contains Trunk routing elements, which have no KiCad "
"equivalent. These elements were not loaded."
msgstr ""
"CADSTAR-designen innehåller Trunk routing-element, som inte har någon KiCad-"
"motsvarighet. Dessa element laddades inte."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:153
#, c-format
msgid ""
"The CADSTAR design contains variants which has no KiCad equivalent. Only the "
"variant '%s' was loaded."
msgstr ""
"CADSTAR-designen innehåller varianter som inte har någon KiCad-motsvarighet. "
"Endast varianten '%s' laddades."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:165
msgid ""
"CADSTAR fonts are different to the ones in KiCad. This will likely result in "
"alignment issues that may cause DRC errors. Please review the imported text "
"elements carefully and correct manually if required."
msgstr ""
"CADSTAR-fonter skiljer sig från KiCads fonter. Detta orsakar troligen "
"justeringsproblem som kan skapa DRC-fel. Vänligen kontrollera de importerade "
"textelementen noggrant och korrigera manuellt om nödvändigt."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:194
#, c-format
msgid ""
"The CADSTAR layer '%s' has no KiCad equivalent. All elements on this layer "
"have been mapped to KiCad layer '%s' instead."
msgstr ""
"CADSTAR-skiktet '%s' har ingen KiCad-motsvarighet. Alla element i detta "
"lager har i stället mappats till KiCad-lagret '%s'."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:207
#, c-format
msgid ""
"The CADSTAR layer '%s' has been assumed to be a technical layer. All "
"elements on this layer have been mapped to KiCad layer '%s'."
msgstr ""
"CADSTAR-lagret '%s' har antagits vara ett tekniskt lager. Alla element i "
"detta lager har avbildats till KiCad-lagret '%s'."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:516
#, c-format
msgid "Unexpected layer '%s' in layer stack."
msgstr "Oväntat lager '%s' i lageruppbyggnad."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:673
#, c-format
msgid "Design rule %s was not found. This was ignored."
msgstr "Designregel %s hittades inte. Detta ignorerades."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:703
msgid ""
"KiCad design rules are different from CADSTAR ones. Only the compatible "
"design rules were imported. It is recommended that you review the design "
"rules that have been applied."
msgstr ""
"KiCad-designregler skiljer sig från CADSTAR-regler. Endast kompatibla "
"designregler importerades. Vi rekommenderar att du granskar de designregler "
"som har tillämpats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:902
#, c-format
msgid ""
"The CADSTAR area '%s' in library component '%s' does not have a KiCad "
"equivalent. The area is neither a via nor route keepout area. The area was "
"not imported."
msgstr ""
"CADSTAR-området '%s' i bibliotekskomponenten '%s' har ingen KiCad-"
"motsvarighet. Området är varken en spärrzon för vior eller ledare. Området "
"importerades inte."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:988
#, c-format
msgid ""
"The CADSTAR pad definition '%s' is a complex pad stack, which is not "
"supported in KiCad. Please review the imported pads as they may require "
"manual correction."
msgstr ""
"CADSTAR:s lödyte-definition '%s' är en komplex kragstapel, vilket inte stöds "
"i KiCad. Vänligen kontrollera de importerade lödytorna då de kan behöva "
"manuell rättning."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1207
#, c-format
msgid ""
"The CADSTAR pad definition '%s' has the hole shape outside the pad shape. "
"The hole has been moved to the center of the pad."
msgstr ""
"CADSTAR-lödytedefinitionen '%s' har hålformen utanför lödytans form. Hålet "
"har flyttats till mitten av lödytan."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1238
#, c-format
msgid "The CADSTAR pad definition '%s' has import errors: %s"
msgstr "CADSTAR:s lödyte-definition '%s' har importeringsfel: %s"
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1256
#, c-format
msgid "Unable to find pad index '%d' in footprint '%s'."
msgstr "Kan inte hitta lödyteindex '%d' i fotavtryck '%s'."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1289
#, c-format
msgid "Unable to find group ID %s in the group definitions."
msgstr "Kunde inte hitta grupp-ID %s bland gruppdefinitionerna."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1295
#, c-format
msgid ""
"Unable to find sub group %s in the group map (parent group ID=%s, Name=%s)."
msgstr ""
"Kunde inte hitta undergrupp %s i grupp-mappen (överordnad grupp-ID=%s, "
"namn=%s)."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1372
#, c-format
msgid ""
"Dimension ID %s is an angled dimension, which has no KiCad equivalent. An "
"aligned dimension was loaded instead."
msgstr ""
"Måttsättning med ID %s är en vinklat mått som inte har någon KiCad-"
"ekvivalent. En horisontell/vertikal dimension laddades istället."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1383
#, c-format
msgid ""
"Dimension ID %s has 'External' style in CADSTAR. External dimension styles "
"are not yet supported in KiCad. The dimension object was imported with an "
"internal dimension style instead."
msgstr ""
"Dimension ID %s har \"Extern\" stil i CADSTAR. Externa dimensionstilar stöds "
"ännu inte i KiCad. Dimensionsobjektet importerades istället med ett internt "
"format."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1440
#, c-format
msgid "Unexpected Dimension type (ID %s). This was not imported."
msgstr "Oväntad dimensionstyp (ID %s). Denna importerades inte."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1575
#, c-format
msgid ""
"Dimension %s is an angular dimension which has no KiCad equivalent. The "
"object was not imported."
msgstr ""
"Dimension %s är en vinkeldimension som inte har någon motsvarighet i KiCad. "
"Objektet importerades inte."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1615
#, c-format
msgid ""
"The CADSTAR area '%s' is marked as a placement area in CADSTAR. Placement "
"areas are not supported in KiCad. Only the supported elements for the area "
"were imported."
msgstr ""
"CADSTAR-området '%s' är markerat som ett placeringsområde i CADSTAR. "
"Placeringsområden stöds inte i KiCad. Endast de element som stöds för "
"området importerades."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1624
#, c-format
msgid ""
"The CADSTAR area '%s' does not have a KiCad equivalent. Pure Placement areas "
"are not supported."
msgstr ""
"CADSTAR-området '%s' har ingen KiCad-motsvarighet. Ren placeringsområden "
"stöds inte."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1651
#, c-format
msgid "Unable to find component '%s' in the library(Symdef ID: '%s')"
msgstr ""
"Det gick inte att hitta komponenten '%s' i biblioteket (Symdef ID: '%s')"
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1771
#, c-format
msgid "Unable to find documentation symbol in the library (Symdef ID: '%s')"
msgstr ""
"Det gick inte att hitta dokumentationssymbol i biblioteket (Symdef ID: '%s')"
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1840
#, c-format
msgid ""
"The CADSTAR template '%s' has the setting 'Allow in No Routing Areas' "
"enabled. This setting has no KiCad equivalent, so it has been ignored."
msgstr ""
"CADSTAR-mallen '%s' har inställningen 'Tillåt i inga routningsområden' "
"aktiverad. Denna inställning har ingen KiCad-ekvivalent, så den har "
"ignorerats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1848
#, c-format
msgid ""
"The CADSTAR template '%s' has the setting 'Box Isolated Pins' enabled. This "
"setting has no KiCad equivalent, so it has been ignored."
msgstr ""
"CADSTAR-mallen '%s' har inställningen 'Box Isolated Pins' aktiverad. Denna "
"inställning har ingen KiCad-ekvivalent, så den har ignorerats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1856
#, c-format
msgid ""
"The CADSTAR template '%s' has the setting 'Automatic Repour' enabled. This "
"setting has no KiCad equivalent, so it has been ignored."
msgstr ""
"CADSTAR-mallen '%s' har inställningen 'Automatic Repour' aktiverad. Denna "
"inställning har ingen KiCad-ekvivalent, så den har ignorerats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1867
#, c-format
msgid ""
"The CADSTAR template '%s' has a non-zero value defined for the 'Sliver "
"Width' setting. There is no KiCad equivalent for this, so this setting was "
"ignored."
msgstr ""
"CADSTAR-mallen '%s' har ett värde som inte är noll definierat för "
"inställningen 'Sliver Width'. Det finns ingen KiCad-motsvarighet för detta, "
"så denna inställning ignorerades."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1877
#, c-format
msgid ""
"The CADSTAR template '%s' has different settings for 'Retain Poured Copper - "
"Disjoint' and 'Retain Poured Copper - Isolated'. KiCad does not distinguish "
"between these two settings. The setting for disjoint copper has been applied "
"as the minimum island area of the KiCad Zone."
msgstr ""
"CADSTAR-mallen '%s' har olika inställningar för 'Behåll häll koppar - ojämn' "
"och 'Behåll häll koppar - isolerad'. KiCad skiljer inte mellan dessa två "
"inställningar. Inställningen för separerad koppar har tillämpats som det "
"minsta öområdet i KiCad Zone."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1928
#, c-format
msgid ""
"The CADSTAR template '%s' has different settings for thermal relief in pads "
"and vias. KiCad only supports one single setting for both. The setting for "
"pads has been applied."
msgstr ""
"CADSTAR-mallen '%s' har olika inställningar för termisk avlastning i lödytor "
"och vior. KiCad stöder bara en enda inställning för båda. Inställningen för "
"lödytor har tillämpats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1945
#, c-format
msgid ""
"The CADSTAR template '%s' has thermal reliefs in the original design but the "
"spoke width (%.2f mm) is thinner than the minimum thickness of the zone "
"(%.2f mm). KiCad requires the minimum thickness of the zone to be preserved. "
"Therefore the minimum thickness has been applied as the new spoke width and "
"will be applied next time the zones are filled."
msgstr ""
"CADSTAR-mallen '%s' har termiska avlastningar i den ursprungliga designen "
"men ekerbredden (%.2f mm) är tunnare än zonens minimibredd (%.2f mm). KiCad "
"kräver att zonens minimibredd bevaras. Zonens minimibredd har därför angetts "
"som den nya ekerbredden och kommer tillämpas nästa gång zonerna fylls."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:1992
#, c-format
msgid ""
"The CADSTAR layer '%s' is defined as a power plane layer. However no net "
"with such name exists. The layer has been loaded but no copper zone was "
"created."
msgstr ""
"CADSTAR-lagret '%s' definieras som ett kraftplanlager. Det finns dock inget "
"nät med sådant namn. Skiktet har laddats men ingen kopparzon skapades."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:2094
msgid ""
"The CADSTAR design contains COPPER elements, which have no direct KiCad "
"equivalent. These have been imported as a KiCad Zone if solid or hatch "
"filled, or as a KiCad Track if the shape was an unfilled outline (open or "
"closed)."
msgstr ""
"CADSTAR-designen innehåller KOPPAR-element, som inte har någon direkt KiCad-"
"ekvivalent. Dessa har importerats som en KiCad-zon om de är fyllda med solid "
"eller rutnätsfyllning, eller som en KiCad-ledare om formen var en ofylld "
"kontur (öppen eller sluten)."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:2197
#, c-format
msgid ""
"The net '%s' references component ID '%s' which does not exist. This has "
"been ignored."
msgstr ""
"Nätet '%s' refererar till komponent-ID '%s' som inte finns. Detta har "
"ignorerats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:2203
#, c-format
msgid ""
"The net '%s' references non-existent pad index '%d' in component '%s'. This "
"has been ignored."
msgstr ""
"Nätet '%s' refererar till obefintligt padindex '%d' i komponent '%s'. Detta "
"har ignorerats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:2369
msgid "Text Variables could not be set as there is no project loaded."
msgstr "Textvariabler kunde inte ställas in eftersom inget projekt laddades."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:2454
msgid ""
"The CADSTAR design contains teardrops. This importer does not yet support "
"them, so the teardrops in the design have been ignored."
msgstr ""
"CADSTAR-designen innehåller kragförstärkningar. Detta importverktyg stöder "
"inte dem ännu, varför kragförstärkningarna i designen har ignorerats."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:2485
#, c-format
msgid ""
"The CADSTAR via code '%s' has different shape from a circle defined. KiCad "
"only supports circular vias so this via type has been changed to be a via "
"with circular shape of %.2f mm diameter."
msgstr ""
"CADSTAR:s via-kod '%s' har en annan form än en cirkel definierad. KiCad "
"stöder endast cirkulära vior, så den här typen har ändrats till att vara en "
"via med cirkulär form och %.2f mm diameter."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:2705
#, c-format
msgid ""
"The shape for '%s' is Hatch filled in CADSTAR, which has no KiCad "
"equivalent. Using solid fill instead."
msgstr ""
"Formen för '%s' är rutnätsfylld i CADSTAR, som inte har någon KiCad-"
"motsvarighet. Använd istället solid fyllning."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:3562
#, c-format
msgid ""
"The CADSTAR Hatching code '%s' has %d hatches defined. KiCad only supports 2 "
"hatches (crosshatching) 90 degrees apart. The imported hatching is "
"crosshatched."
msgstr ""
"CADSTAR:s skrafferings-kod '%s' har %d skrafferingar definierade. KiCad "
"stöder endast 2 skrafferingar i 90 graders vinkel från varandra "
"(rutnätsfyllning). Den importerade skrafferingen är fylld met rutnät."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:3572
#, c-format
msgid ""
"The CADSTAR Hatching code '%s' has different line widths for each hatch. "
"KiCad only supports one width for the hatching. The imported hatching uses "
"the width defined in the first hatch definition, i.e. %.2f mm."
msgstr ""
"CADSTAR:s skrafferingskod '%s' har olika linjebredder för varje skraffering. "
"KiCad stöder bara en bredd för skraffering. Den importerade skrafferingen "
"använder bredden definierad i den första skrafferingsdefinitionen, d.v.s. "
"%.2f mm."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:3584
#, c-format
msgid ""
"The CADSTAR Hatching code '%s' has different step sizes for each hatch. "
"KiCad only supports one step size for the hatching. The imported hatching "
"uses the step size defined in the first hatching definition, i.e. %.2f mm."
msgstr ""
"CADSTAR:s skrafferingskod '%s' har olika avstånd för varje skraffering. "
"KiCad stöder bara ett avstånd för skrafferingen. Den importerade "
"skrafferingen använder avståndet definierat i den första "
"skrafferingsdefinitionen, dvs. %.2f mm."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:3597
#, c-format
msgid ""
"The hatches in CADSTAR Hatching code '%s' have an angle difference of %.1f "
"degrees. KiCad only supports hatching 90 degrees apart. The imported "
"hatching has two hatches 90 degrees apart, oriented %.1f degrees from "
"horizontal."
msgstr ""
"Skrafferingarna i CADSTAR:s skrafferingskod '%s' har en vinkelskillnad på "
"%.1f grader. KiCad stöder endast skrafferingar 90 grader från varandra. Den "
"importerade fyllningen har två skrafferingar 90 grader från varandra, "
"orienterade %.1f grader från horisontalplanet."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:3670
#, c-format
msgid ""
"Dimension ID %s uses a type of unit that is not supported in KiCad. "
"Millimeters were applied instead."
msgstr ""
"Dimensions-ID %s använder en typ av enhet som inte stöds i KiCad. Millimeter "
"användes istället."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:3952
msgid ""
"The CADSTAR design contains nets with a 'Net Class' assigned. KiCad does not "
"have an equivalent to CADSTAR's Net Class so these elements were not "
"imported. Note: KiCad's version of 'Net Class' is closer to CADSTAR's 'Net "
"Route Code' (which has been imported for all nets)."
msgstr ""
"CADSTAR-designen innehåller nät med en 'Net Class' tilldelad. KiCad har inte "
"motsvarande CADSTARs Net Class, så dessa element importerades inte. Obs! "
"KiCads version av \"Net Class\" är närmare CADSTARs \"Net Route Code\" (som "
"har importerats för alla nät)."
#: pcbnew/plugins/cadstar/cadstar_pcb_archive_loader.cpp:3962
msgid ""
"The CADSTAR design contains nets with a 'Spacing Class' assigned. KiCad does "
"not have an equivalent to CADSTAR's Spacing Class so these elements were not "
"imported. Please review the design rules as copper pours will affected by "
"this."
msgstr ""
"CADSTAR-designen innehåller nät med en 'Avståndsklass' tilldelad. KiCad har "
"inte motsvarande CADSTAR: s avståndsklass så dessa element importerades "
"inte. Vänligen granska designreglerna eftersom kopparhällar påverkas av "
"detta."
#: pcbnew/plugins/eagle/eagle_plugin.cpp:397
#, c-format
msgid "Unable to read file '%s'"
msgstr "Kunde inte läsa fil: '%s'"
#: pcbnew/plugins/eagle/eagle_plugin.cpp:1187
#, c-format
msgid "<package> '%s' duplicated in <library> '%s'"
msgstr "<package> '%s' duplicerad i <library> '%s'"
#: pcbnew/plugins/eagle/eagle_plugin.cpp:1265
#, c-format
msgid "No '%s' package in library '%s'."
msgstr "Inget '%s' paket i bibliotek '%s'."
#: pcbnew/plugins/eagle/eagle_plugin.cpp:1503
#: pcbnew/plugins/eagle/eagle_plugin.cpp:2304
#, c-format
msgid "Ignoring a polygon since Eagle layer '%s' (%d) was not mapped"
msgstr "Ignorera en polygon eftersom Eagle-lagret '%s' (%d) inte var kartlagt"
#: pcbnew/plugins/eagle/eagle_plugin.cpp:1865
#, c-format
msgid "Ignoring a wire since Eagle layer '%s' (%d) was not mapped"
msgstr "Ignorerar en tråd eftersom Eagle-lagret '%s' (%d) inte var kartlagt"
#: pcbnew/plugins/eagle/eagle_plugin.cpp:2026
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:2420
#: pcbnew/plugins/geda/gpcb_plugin.cpp:616
#: pcbnew/plugins/legacy/legacy_plugin.cpp:1522
#, c-format
msgid ""
"Invalid zero-sized pad ignored in\n"
"file: %s"
msgstr ""
"Felaktig lödyta med storlek noll ignorerad i\n"
"filen: %s"
#: pcbnew/plugins/eagle/eagle_plugin.cpp:2038
#, c-format
msgid "Ignoring a text since Eagle layer '%s' (%d) was not mapped"
msgstr "Ignorerar en text eftersom Eagle-lagret '%s' (%d) inte har kartlagts"
#: pcbnew/plugins/eagle/eagle_plugin.cpp:2191
#, c-format
msgid "Ignoring a rectangle since Eagle layer '%s' (%d) was not mapped"
msgstr "Ignorerar en rektangel eftersom Eagle-lagret '%s' (%d) inte mappats"
#: pcbnew/plugins/eagle/eagle_plugin.cpp:2379
#, c-format
msgid "Ignoring a circle since Eagle layer '%s' (%d) was not mapped"
msgstr "Ignorerar en cirkel eftersom Eagle-lagret '%s' (%d) inte var kartlagt"
#: pcbnew/plugins/fabmaster/fabmaster_plugin.cpp:85
msgid "Could not read file "
msgstr "Kunde inte läsa fil "
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:250
#, c-format
msgid "Unknown FABMASTER section %s:%s at row %zu."
msgstr "Okänd FABMASTER-sektion %s:%s på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:267
#, c-format
msgid "Invalid row size in J row %zu. Expecting 11 elements but found %zu."
msgstr "Ogiltig radstorlek i J-rad %zu. Väntade 11 element men fann %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:290
msgid "Could not find units value, defaulting to mils."
msgstr "Kunde inte hitta värdet för enhet, väljer mils."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:314
#, c-format
msgid "Could not find column label %s."
msgstr "Kunde inte hitta kolumnetikett %s."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:358
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:441
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:681
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:832
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:919
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1227
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1352
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1588
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1667
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1734
#, c-format
msgid "Invalid row size in row %zu. Expecting %zu elements but found %zu."
msgstr "Ogiltig radstorlek på rad %zu. Väntade %zu element men hittade %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:493
#, c-format
msgid "Expecting drill size value but found %s!%s!%s in row %zu."
msgstr "Väntade värde på borrstorlek men fann %s!%s!%s på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:541
#, c-format
msgid "Expecting pad size values but found %s : %s in row %zu."
msgstr "Väntade värden på lödytestorlek men fann %s:%s på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:563
#, c-format
msgid "Invalid pad size in row %zu."
msgstr "Ogiltig storlek på lödyta på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:598
#, c-format
msgid "Expecting pad offset values but found %s:%s in row %zu."
msgstr "Väntade värden på lödyteförskjutning men fann %s:%s på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:643
#, c-format
msgid "Unknown pad shape name '%s' on layer '%s' in row %zu."
msgstr "Okänt namn på lödyteform '%s' på lager '%s' på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:965
#, c-format
msgid "Invalid format for id string '%s' in custom pad row %zu."
msgstr "Ogiltigt format för id-sträng '%s' på anpassad lödyta rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1006
#, c-format
msgid "Could not insert graphical item %d into padstack '%s'."
msgstr "Kunde inte sätta in grafiskt element %d i kragstapel '%s'."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1013
#, c-format
msgid "Unrecognized pad shape primitive '%s' in row %zu."
msgstr "Okänd lödyteformsprimitiv '%s' på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1124
#, c-format
msgid "Invalid token count. Expected 8 but found %zu."
msgstr "Ogiltigt antal polletter. Väntade 8 men fann %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1259
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1448
#, c-format
msgid "Invalid format for record_tag string '%s' in row %zu."
msgstr "Ogiltigt format för \"record_tag\"-sträng '%s' på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1419
#, c-format
msgid "Invalid row size in row %zu. Expecting %zu elements but found %zu."
msgstr "Ogiltig radstorlek på rad %zu. Väntade %zu element men fann %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1458
#, c-format
msgid "Unhandled graphic item '%s' in row %zu."
msgstr "Ohanterat grafiskt element '%s' på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1489
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:1504
#, c-format
msgid "Duplicate item for ID %d and sequence %d in row %zu."
msgstr "Dublett-element för ID %d och sekvens %d på rad %zu."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:2261
#, c-format
msgid "Unable to locate padstack %s in file %s\n"
msgstr "Det gick inte att lokalisera kragstapel %s i filen %s\n"
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:2332
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:2361
#, c-format
msgid "Invalid custom pad '%s'. Replacing with circular pad."
msgstr "Ogiltig användardefinierad lödyta '%s'. Ersätter med cirkulär lödyta."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:2369
#, c-format
msgid "Could not find custom pad '%s'."
msgstr "Kunde inte hitta användardefinierad lödyta '%s'."
#: pcbnew/plugins/fabmaster/import_fabmaster.cpp:2577
#, c-format
msgid "Expecting etch data to be on copper layer. Row found on layer '%s'"
msgstr ""
"Förväntar sig att etsningsdata ska finnas på kopparlager. Rad hittad på "
"lager '%s'"
#: pcbnew/plugins/geda/gpcb_plugin.cpp:91
#, c-format
msgid "Cannot convert '%s' to an integer."
msgstr "Kan inte konvertera '%s' till ett heltal."
#: pcbnew/plugins/geda/gpcb_plugin.cpp:228
#: pcbnew/plugins/geda/gpcb_plugin.cpp:887
#: pcbnew/plugins/kicad/pcb_plugin.cpp:161
#, c-format
msgid "Footprint library '%s' not found."
msgstr "Fotavtrycksbiblioteket '%s' hittades inte."
#: pcbnew/plugins/geda/gpcb_plugin.cpp:282
#: pcbnew/plugins/kicad/pcb_plugin.cpp:216
#, c-format
msgid "Library '%s' has no footprint '%s'."
msgstr "Biblioteket '%s' har inget fotavtryck '%s'."
#: pcbnew/plugins/geda/gpcb_plugin.cpp:347
#: pcbnew/plugins/kicad/pcb_parser.cpp:721
#: pcbnew/plugins/kicad/pcb_parser.cpp:899
#, c-format
msgid "Unknown token '%s'"
msgstr "Okänd token '%s'"
#: pcbnew/plugins/geda/gpcb_plugin.cpp:354
#, c-format
msgid "Element token contains %d parameters."
msgstr "Elementtoken innehåller %d parametrar."
#: pcbnew/plugins/geda/gpcb_plugin.cpp:992
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2703
#, c-format
msgid "Insufficient permissions to delete folder '%s'."
msgstr "Otillräckliga behörigheter för att radera filen '%s'."
#: pcbnew/plugins/geda/gpcb_plugin.cpp:1000
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2711
#, c-format
msgid "Library folder '%s' has unexpected sub-folders."
msgstr "Biblioteksmappen '%s' har oväntade undermappar."
#: pcbnew/plugins/geda/gpcb_plugin.cpp:1019
#, c-format
msgid "Unexpected file '%s' found in library '%s'."
msgstr "Oväntad fil '%s' hittad i bibliotek '%s'."
#: pcbnew/plugins/geda/gpcb_plugin.cpp:1038
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2748
#: pcbnew/plugins/legacy/legacy_plugin.cpp:3222
#, c-format
msgid "Footprint library '%s' cannot be deleted."
msgstr "Fotavtrycksbibliotek '%s' kan inte tas bort."
#: pcbnew/plugins/kicad/pcb_parser.cpp:243
#, c-format
msgid "Cannot interpret date code %d"
msgstr "Kan inte tolka datumkod %d"
#: pcbnew/plugins/kicad/pcb_parser.cpp:913
msgid ""
"Items found on undefined layers. Do you wish to\n"
"rescue them to the User.Comments layer?"
msgstr ""
"Objekt hittades på odefinierade lager. Vill du\n"
"rädda dem till User.Comments-lagret?"
#: pcbnew/plugins/kicad/pcb_parser.cpp:915
msgid "Undefined layers:"
msgstr "Odefinierade lager:"
#: pcbnew/plugins/kicad/pcb_parser.cpp:1175
#, c-format
msgid "Page type '%s' is not valid."
msgstr "Sidtyp '%s' är inte giltig."
#: pcbnew/plugins/kicad/pcb_parser.cpp:1733
#, c-format
msgid "Layer '%s' in file '%s' at line %d is not in fixed layer hash."
msgstr "Lager '%s' i fil '%s' på rad %d finns inte i hash med fast lager."
#: pcbnew/plugins/kicad/pcb_parser.cpp:1770
#, c-format
msgid "%d is not a valid layer count"
msgstr "%d är inte ett giltigt lagerantal"
#: pcbnew/plugins/kicad/pcb_parser.cpp:2171
#: pcbnew/plugins/kicad/pcb_parser.cpp:5645
msgid ""
"The legacy zone fill strategy is no longer supported.\n"
"Convert zones to smoothed polygon fills?"
msgstr ""
"Den äldre strategin för zonfyllning stöds inte längre.\n"
"Konvertera zoner till utjämnade polygonfyllningar?"
#: pcbnew/plugins/kicad/pcb_parser.cpp:2174
#: pcbnew/plugins/kicad/pcb_parser.cpp:5644
#: pcbnew/plugins/kicad/pcb_parser.cpp:5684
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2484
msgid "Legacy Zone Warning"
msgstr "Varning för gammal typ av zon (legacy)"
#: pcbnew/plugins/kicad/pcb_parser.cpp:2450
#, c-format
msgid "Duplicate NETCLASS name '%s' in file '%s' at line %d, offset %d."
msgstr "Dublett NETCLASS-namn '%s' i fil '%s' på rad %d, förskjutning %d."
#: pcbnew/plugins/kicad/pcb_parser.cpp:3603
#, c-format
msgid ""
"Invalid footprint ID in\n"
"file: %s\n"
"line: %d\n"
"offset: %d."
msgstr ""
"Ogiltigt fotavtrycks-ID i\n"
"fil: '%s'\n"
"rad: %d\n"
"förskjutning: %d."
#: pcbnew/plugins/kicad/pcb_parser.cpp:3990
#, c-format
msgid "Cannot handle footprint text type %s"
msgstr "Kan inte hantera textavtryck för fotavtryck %s"
#: pcbnew/plugins/kicad/pcb_parser.cpp:4770
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s\n"
"line: %d offset: %d"
msgstr ""
"Ogiltigt nät-ID i\n"
"fil: %s\n"
"rad: %d förskjutning: %d"
#: pcbnew/plugins/kicad/pcb_parser.cpp:4789
#, c-format
msgid ""
"Net name doesn't match ID in\n"
"file: %s\n"
"line: %d offset: %d"
msgstr ""
"Nätnamnet matchar inte ID i\n"
"fil: %s\n"
"rad: %d förskjutning: %d"
#: pcbnew/plugins/kicad/pcb_parser.cpp:5067
#, c-format
msgid ""
"Invalid zero-sized pad pinned to %s in\n"
"file: %s\n"
"line: %d\n"
"offset: %d"
msgstr ""
"Ogiltig lödyta med storlek noll fäst till %s i\n"
"fil: %s\n"
"rad: %d\n"
"förskjutning: %d"
#: pcbnew/plugins/kicad/pcb_parser.cpp:5251
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s\n"
"line: %d\n"
"offset: %d."
msgstr ""
"Ogiltigt nät-ID i\n"
"fil: '%s'\n"
"rad: %d\n"
"position: %d."
#: pcbnew/plugins/kicad/pcb_parser.cpp:5330
#, c-format
msgid ""
"Invalid net ID in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d."
msgstr ""
"Ogiltigt nät-ID i\n"
"fil: '%s'\n"
"rad: %d\n"
"förskjutning: %d."
#: pcbnew/plugins/kicad/pcb_parser.cpp:5429
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s\n"
"line: %d\n"
"offset: %d"
msgstr ""
"Ogiltigt nät-ID i\n"
"fil: '%s'\n"
"rad: %d\n"
"position: %d"
#: pcbnew/plugins/kicad/pcb_parser.cpp:5550
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s;\n"
"line: %d\n"
"offset: %d."
msgstr ""
"Ogiltigt nät-ID i\n"
"fil: '%s'\n"
"rad: %d\n"
"position: %d."
#: pcbnew/plugins/kicad/pcb_parser.cpp:5685
msgid ""
"The segment zone fill mode is no longer supported.\n"
"Convert zones to smoothed polygon fills?"
msgstr ""
"Det äldre zonfyllningsläget stöds inte längre.\n"
"Konvertera zoner till utjämnade polygonfyllningar?"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:91
#, c-format
msgid "Cannot create footprint library '%s'."
msgstr "Kan inte skapa fotavtrycksbibliotek '%s'."
#: pcbnew/plugins/kicad/pcb_plugin.cpp:97
#, c-format
msgid "Footprint library '%s' is read only."
msgstr "Fotavtrycksbiblioteket '%s' är skrivskyddat."
#: pcbnew/plugins/kicad/pcb_plugin.cpp:135
#, c-format
msgid "Cannot rename temporary file '%s' to '%s'"
msgstr "Kunde inte döpa om temporär fil '%s' till '%s'"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:273
#, fuzzy
msgid "Internal Group Data Error"
msgstr "Intern gruppdatastruktur skadad"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:274
#, c-format
msgid ""
"Please report this bug. Error validating group structure: %s\n"
"\n"
"Save anyway?"
msgstr ""
"Rapportera detta fel. Fel vid validering av gruppstruktur: %s\n"
"\n"
"Spara ändå?"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:276
msgid "Save Anyway"
msgstr "Spara ändå"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:1436
#, c-format
msgid "unknown pad type: %d"
msgstr "okänd typ av lödyta: %d"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2037
#, c-format
msgid "unknown via type %d"
msgstr "okänd via typ %d"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2266
#, c-format
msgid "unknown zone corner smoothing type %d"
msgstr "okänd utjämningstyp %d för zonhörn"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2421
msgid "This file does not contain a PCB."
msgstr "Denna fil innehåller inget kretskort."
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2571
#, c-format
msgid ""
"Library '%s' does not exist.\n"
"Would you like to create it?"
msgstr ""
"Biblioteket '%s' finns inte.\n"
"Vill du skapa det?"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2575
msgid "Library Not Found"
msgstr "Biblioteket hittades inte"
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2601
#, c-format
msgid "Footprint file name '%s' is not valid."
msgstr "Fotavtryckets filnamn '%s' är inte giltigt."
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2607
#, c-format
msgid "Insufficient permissions to delete '%s'."
msgstr "Otillräckliga behörigheter för att radera '%s'."
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2678
#, c-format
msgid "Cannot overwrite library path '%s'."
msgstr "Kunde inte skriva över bibliotekssökvägen '%s'."
#: pcbnew/plugins/kicad/pcb_plugin.cpp:2730
#, c-format
msgid "Unexpected file '%s' found in library path '%s'."
msgstr "Oväntad fil '%s' hittades i bibliotekssökvägen '%s'."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:586
#, c-format
msgid "File '%s' has an unrecognized version: %d."
msgstr "Filen %s har en okänd version: %d."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:732
#, c-format
msgid "Unknown sheet type '%s' on line: %d."
msgstr "Okänd arktyp '%s' på rad: %d."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:1297
#, c-format
msgid "Missing '$EndMODULE' for MODULE '%s'."
msgstr "'$EndMODULE' saknas för MODUL '%s'."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:1347
#, c-format
msgid "Unknown padshape '%c=0x%02x' on line: %d of footprint: '%s'."
msgstr "Okänd lödyteform '%c = 0x%02x' på rad: %d i fotavtryck: '%s'."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:1546
#, c-format
msgid "Unknown FP_SHAPE type:'%c=0x%02x' on line %d of footprint '%s'."
msgstr "Okänd FP_SHAPE-typ:'%c=0x%02x' på rad: %d i fotavtryck: '%s'."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2320
#, c-format
msgid "Duplicate NETCLASS name '%s'."
msgstr "Dubletter av NETCLASS-namn '%s'."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2401
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2412
#, c-format
msgid "Bad ZAux for CZONE_CONTAINER \"%s\""
msgstr "Dålig ZAux för CZONE_CONTAINER \"%s\""
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2427
#, c-format
msgid "Bad ZSmoothing for CZONE_CONTAINER \"%s\""
msgstr "Dålig ZSmoothing för CZONE_CONTAINER \"%s\""
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2482
msgid ""
"The legacy segment fill mode is no longer supported.\n"
"Convert zones to smoothed polygon fills?"
msgstr ""
"Det äldre segmentfyllningsläget stöds inte längre.\n"
"Konvertera zoner till utjämnade polygonfyllningar?"
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2522
#, c-format
msgid "Bad ZClearance padoption for CZONE_CONTAINER \"%s\""
msgstr "Dåligt val för ZClearance för CZONE_CONTAINER \"%s\""
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2805
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2844
#, c-format
msgid ""
"Invalid floating point number in file: '%s'\n"
"line: %d, offset: %d"
msgstr ""
"Ogiltigt flyttalsnummer i fil: '%s'\n"
"rad: %d, förskjutning: %d"
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2815
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2854
#, c-format
msgid ""
"Missing floating point number in file: '%s'\n"
"line: %d, offset: %d"
msgstr ""
"Flyttalsnummer saknas i fil: '%s'\n"
"rad: %d, förskjutning: %d"
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2996
#, c-format
msgid "File '%s' is empty."
msgstr "Filen %s är tom."
#: pcbnew/plugins/legacy/legacy_plugin.cpp:2999
#, c-format
msgid "File '%s' is not a legacy library."
msgstr "Filen %s är inte ett äldre bibliotek."
#: pcbnew/plugins/pcad/pcb.cpp:50 pcbnew/plugins/pcad/pcb.cpp:61
#: pcbnew/plugins/pcad/pcb.cpp:72
#, c-format
msgid "Unknown PCad layer %u"
msgstr "Okänt PCad-lager %u"
#: pcbnew/plugins/pcad/pcb.cpp:756
msgid "KiCad only supports 32 signal layers."
msgstr "KiCad stöder endast 32 signallager."
#: pcbnew/plugins/pcad/pcb_via.cpp:93
msgid "Unable to find library section."
msgstr "Kunde inte hitta bibliotekssektion."
#: pcbnew/plugins/pcad/pcb_via.cpp:108
#, c-format
msgid "Unable to find viaStyleDef %s."
msgstr "Kunde inte hitta viaStyleDef %s."
#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:74
msgid "Exception on python action plugin code"
msgstr "Undantag för plugin-kod för python-åtgärd"
#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:86
#: pcbnew/python/scripting/pcbnew_footprint_wizards.cpp:83
#, c-format
msgid "Method '%s' not found, or not callable"
msgstr "Metod '%s' hittades inte eller kan inte anropas"
#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:87
#: pcbnew/python/scripting/pcbnew_footprint_wizards.cpp:84
msgid "Unknown Method"
msgstr "Okänd metod"
#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:374
msgid "Apply action script"
msgstr "Tillämpa action-script"
#: pcbnew/python/scripting/pcbnew_footprint_wizards.cpp:70
msgid "Exception on python footprint wizard code"
msgstr "Undantag för guiden för pythons fotavtryck"
#: pcbnew/router/length_tuner_tool.cpp:47
msgid "New Track"
msgstr "Ny ledare"
#: pcbnew/router/length_tuner_tool.cpp:47
msgid "Starts laying a new track."
msgstr "Börjar dra en ny ledare."
#: pcbnew/router/length_tuner_tool.cpp:52
msgid "End Track"
msgstr "Slutför bana"
#: pcbnew/router/length_tuner_tool.cpp:52
msgid "Stops laying the current meander."
msgstr "Slutar lägga nuvarande slingrande."
#: pcbnew/router/length_tuner_tool.cpp:57
msgid "Increase Spacing"
msgstr "Öka avståndet"
#: pcbnew/router/length_tuner_tool.cpp:57
msgid "Increase meander spacing by one step."
msgstr "Öka meanderavståndet med ett steg."
#: pcbnew/router/length_tuner_tool.cpp:63
msgid "Decrease Spacing"
msgstr "Minska avståndet"
#: pcbnew/router/length_tuner_tool.cpp:63
msgid "Decrease meander spacing by one step."
msgstr "Minska meanderavståndet med ett steg."
#: pcbnew/router/length_tuner_tool.cpp:69
msgid "Increase Amplitude"
msgstr "Öka amplituden"
#: pcbnew/router/length_tuner_tool.cpp:69
msgid "Increase meander amplitude by one step."
msgstr "Öka meanderamplituden med ett steg."
#: pcbnew/router/length_tuner_tool.cpp:75
msgid "Decrease Amplitude"
msgstr "Minska amplituden"
#: pcbnew/router/length_tuner_tool.cpp:75
msgid "Decrease meander amplitude by one step."
msgstr "Minska slingrande amplitud med ett steg."
#: pcbnew/router/length_tuner_tool.cpp:100
msgid "Length Tuner"
msgstr "Längdmottagare"
#: pcbnew/router/pns_diff_pair_placer.cpp:475
msgid ""
"Unable to find complementary differential pair nets. Make sure the names of "
"the nets belonging to a differential pair end with either N/P or +/-."
msgstr ""
"Det gick inte att hitta komplementära nät för differentiellt par. Se till "
"att namnen på de nät som tillhör ett differentiellt par slutar med antingen "
"N/P eller +/-."
#: pcbnew/router/pns_diff_pair_placer.cpp:492
msgid ""
"Can't find a suitable starting point. If starting from an existing "
"differential pair make sure you are at the end."
msgstr ""
"Kan inte hitta en lämplig utgångspunkt. Om du börjar från ett befintligt "
"differentialpar, se till att du är i slutet."
#: pcbnew/router/pns_diff_pair_placer.cpp:547
#, c-format
msgid "Can't find a suitable starting point for coupled net \"%s\"."
msgstr "Det går inte att hitta en lämplig startpunkt för kopplat nät \"%s\"."
#: pcbnew/router/pns_dp_meander_placer.cpp:76
#: pcbnew/router/pns_meander_placer.cpp:65
msgid "Please select a track whose length you want to tune."
msgstr "Vänligen välj en ledare vars längd du vill anpassa."
#: pcbnew/router/pns_dp_meander_placer.cpp:90
msgid ""
"Unable to find complementary differential pair net for length tuning. Make "
"sure the names of the nets belonging to a differential pair end with either "
"_N/_P or +/-."
msgstr ""
"Det går inte att hitta kompletterande differentialparnät för längdjustering. "
"Se till att namnen på de nät som tillhör ett differentiellt par slutar med "
"antingen _N / _P eller +/-."
#: pcbnew/router/pns_dp_meander_placer.cpp:439
#: pcbnew/router/pns_meander_placer.cpp:279
msgid "Too long: "
msgstr "För länge: "
#: pcbnew/router/pns_dp_meander_placer.cpp:442
#: pcbnew/router/pns_meander_placer.cpp:282
msgid "Too short: "
msgstr "För kort: "
#: pcbnew/router/pns_dp_meander_placer.cpp:445
#: pcbnew/router/pns_meander_placer.cpp:285
msgid "Tuned: "
msgstr "Stämd: "
#: pcbnew/router/pns_dp_meander_placer.cpp:448
#: pcbnew/router/pns_meander_placer.cpp:288
#: pcbnew/router/pns_meander_skew_placer.cpp:173
msgid "?"
msgstr "?"
#: pcbnew/router/pns_kicad_iface.cpp:600 pcbnew/router/pns_kicad_iface.cpp:671
#: pcbnew/router/router_tool.cpp:756
msgid "board minimum clearance"
msgstr "mönsterkortets minsta isolationsavstånd"
#: pcbnew/router/pns_kicad_iface.cpp:604 pcbnew/router/pns_kicad_iface.cpp:670
#: pcbnew/router/router_tool.cpp:723 pcbnew/router/router_tool.cpp:743
msgid "board minimum track width"
msgstr "mönsterkortets minsta ledarbredd"
#: pcbnew/router/pns_kicad_iface.cpp:611
msgid "existing track"
msgstr "befintlig ledare"
#: pcbnew/router/pns_kicad_iface.cpp:632
msgid "netclass 'Default'"
msgstr "nätklass 'Default'"
#: pcbnew/router/pns_kicad_iface.cpp:1228
#, c-format
msgid "%s is malformed."
msgstr "%s är felaktig."
#: pcbnew/router/pns_kicad_iface.cpp:1231
msgid ""
"This zone cannot be handled by the router.\n"
"Please verify it is not a self-intersecting polygon."
msgstr ""
"Denna zon kan inte hanteras av spårlayoutverktyget.\n"
"Kontrollera att det inte är en självkorsande polygon."
#: pcbnew/router/pns_kicad_iface.cpp:1886 pcbnew/router/router_tool.cpp:453
msgid "Interactive Router"
msgstr "Interaktiv router"
#: pcbnew/router/pns_meander_skew_placer.cpp:54
msgid "Please select a differential pair trace you want to tune."
msgstr "Välj ett differentiellt ledarpar som du vill anpassa."
#: pcbnew/router/pns_meander_skew_placer.cpp:70
msgid ""
"Unable to find complementary differential pair net for skew tuning. Make "
"sure the names of the nets belonging to a differential pair end with either "
"_N/_P or +/-."
msgstr ""
"Det gick inte att hitta kompletterande differentialparnät för snedställning. "
"Se till att namnen på de nät som tillhör ett differentiellt par slutar med "
"antingen _N / _P eller +/-."
#: pcbnew/router/pns_meander_skew_placer.cpp:164
msgid "Too long: skew "
msgstr "För lång: skevhet "
#: pcbnew/router/pns_meander_skew_placer.cpp:167
msgid "Too short: skew "
msgstr "För kort: skevhet "
#: pcbnew/router/pns_meander_skew_placer.cpp:170
msgid "Tuned: skew "
msgstr "Avstämd: skevhet "
#: pcbnew/router/pns_router.cpp:223
msgid "Diff pair gap is less than board minimum clearance."
msgstr ""
"Differentialparets isolationsavstånd är mindre än mönsterkortets minsta "
"isolationsavstånd."
#: pcbnew/router/pns_router.cpp:256
msgid "Cannot start routing from a non-plated hole."
msgstr "Kan inte dra ledare från ett icke-pläterat hål."
#: pcbnew/router/pns_router.cpp:267
#, c-format
msgid "Rule area '%s' disallows tracks."
msgstr "Regelområde '%s' tillåter inte ledare."
#: pcbnew/router/pns_router.cpp:272
msgid "Rule area disallows tracks."
msgstr "Regelområdet tillåter inte ledare."
#: pcbnew/router/pns_router.cpp:281
msgid "Cannot start routing from a text item."
msgstr "Kan inte dra ledare från ett text-element."
#: pcbnew/router/pns_router.cpp:286
msgid "Cannot start routing from a graphic."
msgstr "Kan inte dra ledare från ett grafiskt element."
#: pcbnew/router/pns_router.cpp:325 pcbnew/router/pns_router.cpp:381
msgid "The routing start point violates DRC."
msgstr "Ruttstartpunkten bryter mot DRC."
#: pcbnew/router/pns_router.cpp:333
msgid "Cannot start a differential pair in the middle of nowhere."
msgstr "Kan inte starta ett differentiellt par mitt i ingenstans."
#: pcbnew/router/router_tool.cpp:108
msgid "Finish Track"
msgstr "Avsluta ledare"
#: pcbnew/router/router_tool.cpp:108
msgid "Stops laying the current track."
msgstr "Avslutar dragning av den aktuella ledaren."
#: pcbnew/router/router_tool.cpp:114
msgid "Place Through Via"
msgstr "Placera genomgående via"
#: pcbnew/router/router_tool.cpp:115
msgid "Adds a through-hole via at the end of currently routed track."
msgstr ""
"Lägger till ett via med genomgående hål i slutet av den ledare som dras."
#: pcbnew/router/router_tool.cpp:121
msgid "Place Blind/Buried Via"
msgstr "Placera blind / begravd via"
#: pcbnew/router/router_tool.cpp:122
msgid "Adds a blind or buried via at the end of currently routed track."
msgstr ""
"Lägger till en blind eller begravd via i slutet av ledaren som dras för "
"närvarande."
#: pcbnew/router/router_tool.cpp:128
msgid "Place Microvia"
msgstr "Placera Microvia"
#: pcbnew/router/router_tool.cpp:128
msgid "Adds a microvia at the end of currently routed track."
msgstr "Lägger till en mikrovia i slutet av den för närvarande dragna ledaren."
#: pcbnew/router/router_tool.cpp:135
msgid "Select Layer and Place Through Via..."
msgstr "Välj lager och placera genomgående via..."
#: pcbnew/router/router_tool.cpp:136
msgid ""
"Select a layer, then add a through-hole via at the end of currently routed "
"track."
msgstr ""
"Välj ett lager och lägg sedan till ett via med genomgående hål i slutet av "
"ledaren som för närvarande dras."
#: pcbnew/router/router_tool.cpp:144
msgid "Select Layer and Place Blind/Buried Via..."
msgstr "Välj lager och placera blind / begravd via..."
#: pcbnew/router/router_tool.cpp:145
msgid ""
"Select a layer, then add a blind or buried via at the end of currently "
"routed track."
msgstr ""
"Välj ett lager och lägg sedan till en blind eller begravd via i slutet av "
"ledaren som dras för närvarande."
#: pcbnew/router/router_tool.cpp:153
msgid "Select Layer and Place Micro Via..."
msgstr "Välj lager och placera mikrovia..."
#: pcbnew/router/router_tool.cpp:154
msgid ""
"Select a layer, then add a micro via at the end of currently routed track."
msgstr ""
"Välj ett lager och lägg sedan till en mikrovia i slutet av den för "
"närvarande dragna ledaren."
#: pcbnew/router/router_tool.cpp:161
msgid "Custom Track/Via Size..."
msgstr "Anpassad ledar-/via-storlek..."
#: pcbnew/router/router_tool.cpp:162
msgid "Shows a dialog for changing the track width and via size."
msgstr "Visar en dialogruta för att ändra ledarbredd och via-storlek."
#: pcbnew/router/router_tool.cpp:168
msgid "Switch Track Posture"
msgstr "Växla ledarställning"
#: pcbnew/router/router_tool.cpp:169
msgid "Switches posture of the currently routed track."
msgstr "Växla ställning för den för närvarande dragna ledaren."
#: pcbnew/router/router_tool.cpp:175
msgid "Track Corner Mode"
msgstr "Ledarhörnsläge"
#: pcbnew/router/router_tool.cpp:176
msgid "Switches between sharp/rounded and 45°/90° corners when routing tracks."
msgstr "Växlar mellan skarpa/avrundade och 45°/90° hörn under ledardragning."
#: pcbnew/router/router_tool.cpp:200
msgid "Select Track/Via Width"
msgstr "Välj ledar-/via-bredd"
#: pcbnew/router/router_tool.cpp:218
msgid "Use Starting Track Width"
msgstr "Använd ledarbredd från startpunkt"
#: pcbnew/router/router_tool.cpp:219
msgid "Route using the width of the starting track."
msgstr ""
"Dra ny ledare med samma bredd som den befintliga ledare där den nya "
"ledardragningen börjar."
#: pcbnew/router/router_tool.cpp:223 pcbnew/router/router_tool.cpp:348
msgid "Use Net Class Values"
msgstr "Använd nätklassvärden"
#: pcbnew/router/router_tool.cpp:224
msgid "Use track and via sizes from the net class"
msgstr "Använd ledar- och via-storlekar från nätklassen"
#: pcbnew/router/router_tool.cpp:228 pcbnew/router/router_tool.cpp:353
#: pcbnew/tools/drawing_tool.cpp:108
msgid "Use Custom Values..."
msgstr "Använd anpassade värden ..."
#: pcbnew/router/router_tool.cpp:229 pcbnew/tools/drawing_tool.cpp:109
msgid "Specify custom track and via sizes"
msgstr "Ange anpassade ledar- och via-storlekar"
#: pcbnew/router/router_tool.cpp:240
msgid "Track netclass width"
msgstr "Ledarbredd enligt nätklass"
#: pcbnew/router/router_tool.cpp:242
#, c-format
msgid "Track %s"
msgstr "Ledare %s"
#: pcbnew/router/router_tool.cpp:256
msgid "Via netclass values"
msgstr "Vior enligt nätklassvärden"
#: pcbnew/router/router_tool.cpp:261 pcbnew/tools/drawing_tool.cpp:120
#, c-format
msgid "Via %s, hole %s"
msgstr "Via %s, hål %s"
#: pcbnew/router/router_tool.cpp:267 pcbnew/tools/drawing_tool.cpp:126
#, c-format
msgid "Via %s"
msgstr "Via %s"
#: pcbnew/router/router_tool.cpp:333
msgid "Select Differential Pair Dimensions"
msgstr "Välj mått för differentiellt par"
#: pcbnew/router/router_tool.cpp:349
msgid "Use differential pair dimensions from the net class"
msgstr "Använd mått för differentiellt par från nätklassen"
#: pcbnew/router/router_tool.cpp:354
msgid "Specify custom differential pair dimensions"
msgstr "Ange anpassade mått för differentiellt par"
#: pcbnew/router/router_tool.cpp:371
#, c-format
msgid "Width %s"
msgstr "Bredd %s"
#: pcbnew/router/router_tool.cpp:376
#, c-format
msgid "Width %s, via gap %s"
msgstr "Bredd %s, via gap %s"
#: pcbnew/router/router_tool.cpp:385
#, c-format
msgid "Width %s, gap %s"
msgstr "Bredd %s, gap %s"
#: pcbnew/router/router_tool.cpp:391
#, c-format
msgid "Width %s, gap %s, via gap %s"
msgstr "Bredd %s, gap %s, via gap %s"
#: pcbnew/router/router_tool.cpp:569
#, c-format
msgid ""
"Event file: %s\n"
"Board dump: %s"
msgstr ""
"Händelsefil: %s\n"
"Kort-dump: %s"
#: pcbnew/router/router_tool.cpp:571
msgid "Save router log"
msgstr "Spara logg för ledardraningsverktyg"
#: pcbnew/router/router_tool.cpp:571
msgid ""
"Would you like to save the router\n"
"event log for debugging purposes?"
msgstr ""
"Vill du spara routerns händelselogg \n"
"för felsökningsändamål?"
#: pcbnew/router/router_tool.cpp:1095
msgid "Blind/buried via need 2 different layers."
msgstr "Blinda/begravda vior behöver 2 olika lager."
#: pcbnew/router/router_tool.cpp:1173
msgid "Tracks on Copper layers only."
msgstr "Ledare endast på kopparlager."
#: pcbnew/router/router_tool.cpp:1812 pcbnew/router/router_tool.cpp:2392
msgid "The selected item is locked."
msgstr "Det valda objektet är låst."
#: pcbnew/router/router_tool.cpp:1814
msgid "Drag Anyway"
msgstr "Dra ändå"
#: pcbnew/router/router_tool.cpp:2394 pcbnew/tools/pcb_actions.cpp:1539
msgid "Break Track"
msgstr "Kapa ledare"
#: pcbnew/router/router_tool.cpp:2473
#, c-format
msgid "Routing Diff Pair: %s"
msgstr "Drar differentialpar: %s"
#: pcbnew/router/router_tool.cpp:2485 pcbnew/router/router_tool.cpp:2496
#, c-format
msgid "Resolved Netclass: %s"
msgstr "Fastställd nätklass: %s"
#: pcbnew/router/router_tool.cpp:2493
#, c-format
msgid "Routing Track: %s"
msgstr "Drar ledare: %s"
#: pcbnew/router/router_tool.cpp:2501
msgid "Routing Track"
msgstr "Drar ledare"
#: pcbnew/router/router_tool.cpp:2502
msgid "(no net)"
msgstr "(inget nät)"
#: pcbnew/router/router_tool.cpp:2511
msgid "Free-angle"
msgstr "Frivinkel"
#: pcbnew/router/router_tool.cpp:2517
msgid "45-degree"
msgstr "45-graders"
#: pcbnew/router/router_tool.cpp:2518
msgid "45-degree rounded"
msgstr "45-graders avrundad"
#: pcbnew/router/router_tool.cpp:2519
msgid "90-degree"
msgstr "90-graders"
#: pcbnew/router/router_tool.cpp:2520
msgid "90-degree rounded"
msgstr "90-graders rundad"
#: pcbnew/router/router_tool.cpp:2525
msgid "Corner Style"
msgstr "Hörnstil"
#: pcbnew/router/router_tool.cpp:2531 pcbnew/router/router_tool.cpp:2548
#, c-format
msgid "Track Width: %s"
msgstr "Ledarbredd: %s"
#: pcbnew/router/router_tool.cpp:2541
#, c-format
msgid "Diff Pair Gap: %s"
msgstr "Mellanrum för differentialpar: %s"
#: pcbnew/sel_layer.cpp:340
msgid "Warning: top and bottom layers are same."
msgstr "Varning: topp- och bottenlagren är desamma."
#: pcbnew/specctra_import_export/specctra_export.cpp:106
msgid "BOARD exported OK."
msgstr "BOARD exporterade OK."
#: pcbnew/specctra_import_export/specctra_export.cpp:108
msgid "Unable to export, please fix and try again"
msgstr "Det gick inte att exportera, fixa och försök igen"
#: pcbnew/specctra_import_export/specctra_export.cpp:1094
#, c-format
msgid "Footprint with value of '%s' has an empty reference designator."
msgstr "Fotavtryck med värdet '%s' har tom referensbeteckning."
#: pcbnew/specctra_import_export/specctra_export.cpp:1104
#, c-format
msgid "Multiple footprints have the reference designator '%s'."
msgstr "Flera fotavtryck har referensbeteckningen '%s'."
#: pcbnew/specctra_import_export/specctra_import.cpp:76
msgid ""
"Board may be corrupted, do not save it.\n"
" Fix problem and try again"
msgstr ""
"Kortet kan vara korrupt, spara det inte.\n"
" Åtgärda problemet och försök igen"
#: pcbnew/specctra_import_export/specctra_import.cpp:99
msgid "Session file imported and merged OK."
msgstr "Sessionsfilen importerades och slogs samman OK."
#: pcbnew/specctra_import_export/specctra_import.cpp:159
#, c-format
msgid "Session file uses invalid layer id '%s'."
msgstr "Sessionsfilen använder ogiltigt lager-id '%s'."
#: pcbnew/specctra_import_export/specctra_import.cpp:218
msgid "Session via padstack has no shapes"
msgstr "Sessionens kragstapel för via har inga former"
#: pcbnew/specctra_import_export/specctra_import.cpp:227
#, c-format
msgid "Unsupported via shape: %s."
msgstr "Icke-stödd via-form: %s."
#: pcbnew/specctra_import_export/specctra_import.cpp:248
#: pcbnew/specctra_import_export/specctra_import.cpp:276
#, c-format
msgid "Unsupported via shape: %s"
msgstr "Ej stöds via form: %s"
#: pcbnew/specctra_import_export/specctra_import.cpp:286
#, c-format
msgid "Session file uses invalid layer id '%s'"
msgstr "Sessionsfilen använder ogiltigt lager-id '%s'"
#: pcbnew/specctra_import_export/specctra_import.cpp:342
msgid "Session file is missing the \"session\" section"
msgstr "Sessionsfilen saknar avsnittet \"session\""
#: pcbnew/specctra_import_export/specctra_import.cpp:345
msgid "Session file is missing the \"routes\" section"
msgstr "Sessionsfilen saknar avsnittet \"rutter\""
#: pcbnew/specctra_import_export/specctra_import.cpp:348
msgid "Session file is missing the \"library_out\" section"
msgstr "Sessionsfilen saknar avsnittet \"library_out\""
#: pcbnew/specctra_import_export/specctra_import.cpp:392
#, c-format
msgid "Reference '%s' not found."
msgstr "Referens '%s' hittades inte."
#: pcbnew/specctra_import_export/specctra_import.cpp:521
#, c-format
msgid "A wire_via refers to missing padstack '%s'."
msgstr "En wire_via refererar till en saknad kragstapel '%s'."
#: pcbnew/teardrop/dialog_teardrop.cpp:224
#, c-format
msgid "%d teardrops created"
msgstr "%d kragförstärkningar skapades"
#: pcbnew/teardrop/dialog_teardrop.cpp:242
#, c-format
msgid "%d teardrops removed."
msgstr "%d kragförstärkningar borttagna."
#: pcbnew/teardrop/dialog_teardrop_base.cpp:34
msgid "Round shapes:"
msgstr "Runda former:"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:48
#: pcbnew/teardrop/dialog_teardrop_base.cpp:152
#: pcbnew/teardrop/dialog_teardrop_base.cpp:256
msgid "Best length:"
msgstr "Bästa längd:"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:60
#: pcbnew/teardrop/dialog_teardrop_base.cpp:164
#: pcbnew/teardrop/dialog_teardrop_base.cpp:268
msgid "Best height:"
msgstr "Bästa höjd:"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:72
#: pcbnew/teardrop/dialog_teardrop_base.cpp:176
#: pcbnew/teardrop/dialog_teardrop_base.cpp:280
msgid "Max length:"
msgstr "Maximal längd:"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:105
#: pcbnew/teardrop/dialog_teardrop_base.cpp:209
#: pcbnew/teardrop/dialog_teardrop_base.cpp:313
msgid ""
"Max pad/via size to track width ratio to create a teardrop.\n"
"100 always creates a teardrop."
msgstr ""
"Största förhållande mellan storlek på lödyta / via och ledarbredd för vilken "
"kragförstärkning skapas.\n"
"100 skapar alltid kragförstärkning."
#: pcbnew/teardrop/dialog_teardrop_base.cpp:120
#: pcbnew/teardrop/dialog_teardrop_base.cpp:224
#: pcbnew/teardrop/dialog_teardrop_base.cpp:328
msgid "Straight lines"
msgstr "Raka linjer"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:120
#: pcbnew/teardrop/dialog_teardrop_base.cpp:224
#: pcbnew/teardrop/dialog_teardrop_base.cpp:328
msgid "Curved"
msgstr "Bågformad"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:138
msgid "Rect shapes:"
msgstr "Rektangulära former:"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:242
msgid "Tracks:"
msgstr "Ledare:"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:349
msgid "Vias and PTH pads"
msgstr "Vior och hålmonteringslödytor"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:351
msgid "Add teardrops to vias and pads with holes"
msgstr "Lägg till kragförstärkningar på vior och hålmonteringslödytor"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:355
msgid "Round pads only"
msgstr "Endast runda lödytor"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:356
msgid "Add teardrops to round shapes only "
msgstr "Skapa bara kragförstärkningar på objekt med runda former "
#: pcbnew/teardrop/dialog_teardrop_base.cpp:360
msgid "SMD pads"
msgstr "Ytmonteringslödytor"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:362
msgid "Add teardrops to not driiled pads, like SMD"
msgstr "Lägg till kragförstärkningar till lödytor utan hål, som SMD"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:366
msgid "Track to track"
msgstr "Ledare till ledare"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:368
msgid "Add teardrops to two connected tracks of different widths"
msgstr "Lägg till kragförstärkningar mellan förbundna ledare av olika bredd"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:378
msgid "Allow teardrops to span two track segments"
msgstr "Tillåt kragförstärkningen att sträcka sig över två ledarsegment"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:380
msgid ""
"Allows a teardrop to spread over 2 tracks if the first track segment is too "
"short"
msgstr ""
"Låt kragförstärkningen spridas ut över två ledare om det första "
"ledarsegmentet är för kort"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:384
msgid "Place teardrops on pads in zones"
msgstr "Placera kragförstärkningar på lödytor i kopparzoner"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:385
msgid ""
"Pads inside a copper zone outline of same net have no teardrop.\n"
"Check this option to allow teardrop for these pads."
msgstr ""
"Lödytor inne i en kopparzon med samma nät saknar kragförstärkningar.\n"
"Markera denna option för att tillåta kragförstärkningar för dessa lödytor."
#: pcbnew/teardrop/dialog_teardrop_base.cpp:395
msgid "Curve points:"
msgstr "Bågpunkter:"
#: pcbnew/teardrop/dialog_teardrop_base.cpp:397
msgid "Number of segments to build a teardrop with curved shape"
msgstr "Antal segment för att skapa en bågformad kragförstärkning"
#: pcbnew/teardrop/dialog_teardrop_base.h:121
msgid "Add Teardrops"
msgstr "Lägg till kragförstärkningar"
#: pcbnew/teardrop/teardrop.cpp:228
msgid "Add teardrops"
msgstr "Lägg till kragförstärkningar"
#: pcbnew/teardrop/teardrop.cpp:433
msgid "Remove teardrops"
msgstr "Ta bort kragförstärkningar"
#: pcbnew/toolbars_footprint_editor.cpp:92
msgid "Load footprint from current board"
msgstr "Ladda fotavtryck från aktuellt mönsterkort"
#: pcbnew/toolbars_footprint_editor.cpp:96
msgid "Insert footprint into current board"
msgstr "Sätt in fotavtryck på det aktuella mönsterkortet"
#: pcbnew/toolbars_footprint_editor.cpp:279 pcbnew/toolbars_pcb_editor.cpp:767
msgid "+/- to switch"
msgstr "+/- för att växla"
#: pcbnew/toolbars_footprint_viewer.cpp:62
msgid "Display previous footprint"
msgstr "Visa föregående fotavtryck"
#: pcbnew/toolbars_footprint_viewer.cpp:65
msgid "Display next footprint"
msgstr "Visa nästa fotavtryck"
#: pcbnew/toolbars_footprint_viewer.cpp:78
msgid "Insert footprint in board"
msgstr "Lägg till fotavtryck på mönsterkortet"
#: pcbnew/toolbars_pcb_editor.cpp:556
msgid ""
"Select the default width for new tracks. Note that this width can be "
"overridden by the board minimum width, or by the width of an existing track "
"if the 'Use Existing Track Width' feature is enabled."
msgstr ""
"Välj standardbredden för nya ledare. Observera att denna bredd kan "
"överskrivas av kortets minsta ledarbredd, eller av en existerande ledares "
"bredd om 'Använd existerande ledarbredd' är aktiverad."
#: pcbnew/toolbars_pcb_editor.cpp:563
msgid ""
"When routing from an existing track use its width instead of the current "
"width setting"
msgstr ""
"använd ledarens bredd när du startar på en befintlig ledare, annars används "
"aktuell breddinställning"
#: pcbnew/toolbars_pcb_editor.cpp:669
msgid "Track: use netclass width"
msgstr "Ledare: använd nätklassbredd"
#: pcbnew/toolbars_pcb_editor.cpp:675
#, c-format
msgid "Track: %s (%s)"
msgstr "Ledare: %s (%s)"
#: pcbnew/toolbars_pcb_editor.cpp:684 pcbnew/toolbars_pcb_editor.cpp:752
msgid "Edit Pre-defined Sizes..."
msgstr "Redigera fördefinierade storlekar ..."
#: pcbnew/toolbars_pcb_editor.cpp:721
msgid "Via: use netclass sizes"
msgstr "Via: använd nätklasstorlekar"
#: pcbnew/toolbars_pcb_editor.cpp:744
#, c-format
msgid "Via: %s (%s)"
msgstr "Via: %s (%s)"
#: pcbnew/tools/board_editor_control.cpp:117
msgid "Locking"
msgstr "Låser"
#: pcbnew/tools/board_editor_control.cpp:382
msgid "Specctra Session File"
msgstr "Specctra-sessionsfil"
#: pcbnew/tools/board_editor_control.cpp:409
msgid "Specctra DSN File"
msgstr "Specctra DSN-fil"
#: pcbnew/tools/board_editor_control.cpp:433
msgid "Export Board Netlist"
msgstr "Exportera mönsterkortets nätlista"
#: pcbnew/tools/board_editor_control.cpp:434
msgid "KiCad board netlist files"
msgstr "KiCad nätlistefiler för kort"
#: pcbnew/tools/board_editor_control.cpp:448
#, c-format
msgid "Path `%s` is read only."
msgstr "Sökvägen '%s' är skrivskyddad."
#: pcbnew/tools/board_editor_control.cpp:449
msgid "I/O Error"
msgstr "I/O Fel"
#: pcbnew/tools/board_editor_control.cpp:537
#, c-format
msgid "Orphaned net %s re-parented.\n"
msgstr "Orphaned net %s omföräldrades.\n"
#: pcbnew/tools/board_editor_control.cpp:616
msgid "No board problems found."
msgstr "Inga mönsterkortsproblem hittades."
#: pcbnew/tools/board_editor_control.cpp:627
msgid "Updating PCB requires a fully annotated schematic."
msgstr ""
"Uppdatering av mönsterkort kräver att schemat är fullständigt numrerat."
#: pcbnew/tools/board_editor_control.cpp:641
msgid ""
"Cannot update schematic because Pcbnew is opened in stand-alone mode. In "
"order to create or update PCBs from schematics, you must launch the KiCad "
"project manager and create a project."
msgstr ""
"Det går inte att uppdatera kretsschemat eftersom Pcbnew öppnas i fristående "
"läge. För att skapa eller uppdatera mönsterkort från kretsschema måste du "
"starta projekthanteraren för KiCad och skapa ett projekt."
#: pcbnew/tools/board_editor_control.cpp:1134
msgid "Place a footprint"
msgstr "Placera ett fotavtryck"
#: pcbnew/tools/board_editor_control.cpp:1243 pcbnew/tools/pcb_actions.cpp:748
msgid "Lock"
msgstr "Lås"
#: pcbnew/tools/board_editor_control.cpp:1243 pcbnew/tools/pcb_actions.cpp:753
msgid "Unlock"
msgstr "Lås upp"
#: pcbnew/tools/board_editor_control.cpp:1272
msgid "Zones have insufficient overlap for merging."
msgstr "Zoner har otillräcklig överlappning för att kunna slås ihop."
#: pcbnew/tools/board_editor_control.cpp:1318
msgid "Some zone netcodes did not match and were not merged."
msgstr "Några nätkoder för zoner överensstämde inte och slogs inte ihop."
#: pcbnew/tools/board_editor_control.cpp:1324
msgid "Some zone priorities did not match and were not merged."
msgstr "Några prioriteter för zoner överensstämde inte och slogs inte samman."
#: pcbnew/tools/board_editor_control.cpp:1330
msgid "Some zones were rule areas and were not merged."
msgstr "Några zoner var regelytor och slogs inte samman."
#: pcbnew/tools/board_editor_control.cpp:1336
msgid "Some zone layer sets did not match and were not merged."
msgstr "Vissa zonlager överensstämde inte och slogs inte ihop."
#: pcbnew/tools/board_editor_control.cpp:1353
msgid "Some zones did not intersect and were not merged."
msgstr "Vissa zoner var inte i kontakt med varandra och slogs inte ihop."
#: pcbnew/tools/board_editor_control.cpp:1422
msgid "Duplicate zone"
msgstr "Dubblett zon"
#: pcbnew/tools/board_editor_control.cpp:1497
msgid "Selection contains no items with labeled nets."
msgstr "Urvalet innehåller inga objekt med namngivna nät."
#: pcbnew/tools/board_inspection_tool.cpp:59
#, fuzzy
msgid "Net Inspection Tools"
msgstr "Nätinspektör"
#: pcbnew/tools/board_inspection_tool.cpp:164
#, c-format
msgid "[netclass %s]"
msgstr "[nätklass %s]"
#: pcbnew/tools/board_inspection_tool.cpp:175
msgid "Report incomplete: could not compile custom design rules. "
msgstr "Rapport ofullständig: kunde inte kompilera anpassade designregler. "
#: pcbnew/tools/board_inspection_tool.cpp:246
msgid "Violation Report"
msgstr "Överträdelserapport"
#: pcbnew/tools/board_inspection_tool.cpp:272
msgid "Uncoupled Length"
msgstr "Okopplad längd"
#: pcbnew/tools/board_inspection_tool.cpp:273
msgid "Diff pair uncoupled length resolution for:"
msgstr "Tar reda på okopplad längd för differentiellt par:"
#: pcbnew/tools/board_inspection_tool.cpp:281
#: pcbnew/tools/board_inspection_tool.cpp:818
#, c-format
msgid "Resolved max uncoupled length: %s."
msgstr "Tog reda på okopplad längd: %s."
#: pcbnew/tools/board_inspection_tool.cpp:288
#: pcbnew/tools/board_inspection_tool.cpp:1231
msgid "Text height resolution for:"
msgstr "Tar reda på texthöjd för:"
#: pcbnew/tools/board_inspection_tool.cpp:296
#, c-format
msgid "Resolved height constraints: min %s; max %s."
msgstr "Tog reda på höjdbegränsningar: min %s; max %s."
#: pcbnew/tools/board_inspection_tool.cpp:303
#: pcbnew/tools/board_inspection_tool.cpp:1247
msgid "Text thickness resolution for:"
msgstr "Tar reda på textvikt (linjetjocklek) för:"
#: pcbnew/tools/board_inspection_tool.cpp:311
#, c-format
msgid "Resolved thickness constraints: min %s; max %s."
msgstr "Tog reda på begränsningar för tjocklek: min %s; max %s."
#: pcbnew/tools/board_inspection_tool.cpp:318
#: pcbnew/tools/board_inspection_tool.cpp:1152
msgid "Track width resolution for:"
msgstr "Tar reda på ledarbredd för:"
#: pcbnew/tools/board_inspection_tool.cpp:326
#, c-format
msgid "Resolved width constraints: min %s; max %s."
msgstr "Tog reda på begränsningar för bredd: min %s; max %s."
#: pcbnew/tools/board_inspection_tool.cpp:332
msgid "Connection Width"
msgstr "Anslutningsbredd"
#: pcbnew/tools/board_inspection_tool.cpp:333
msgid "Connection width resolution for:"
msgstr "Tar reda på anslutningens bredd för:"
#: pcbnew/tools/board_inspection_tool.cpp:341
#, c-format
msgid "Resolved min connection width constraint: %s."
msgstr "Fastställd begränsning för minsta anslutningsbredd: %s."
#: pcbnew/tools/board_inspection_tool.cpp:347
#: pcbnew/tools/board_inspection_tool.cpp:1171
msgid "Via diameter resolution for:"
msgstr "Tar reda på viadiameter för:"
#: pcbnew/tools/board_inspection_tool.cpp:355
#: pcbnew/tools/board_inspection_tool.cpp:386
#, c-format
msgid "Resolved diameter constraints: min %s; max %s."
msgstr "Tog reda på begränsningar för diameter: min %s; max %s."
#: pcbnew/tools/board_inspection_tool.cpp:361
msgid "Via Annulus"
msgstr "Viakrage"
#: pcbnew/tools/board_inspection_tool.cpp:362
#: pcbnew/tools/board_inspection_tool.cpp:1188
msgid "Via annular width resolution for:"
msgstr "Tar reda på viors kragbredd för:"
#: pcbnew/tools/board_inspection_tool.cpp:370
#, c-format
msgid "Resolved annular width constraints: min %s; max %s."
msgstr "Tog reda på begränsningar för kragbredd: min %s; max %s."
#: pcbnew/tools/board_inspection_tool.cpp:377
#: pcbnew/tools/board_inspection_tool.cpp:1208
msgid "Hole Size"
msgstr "Hålstorlek"
#: pcbnew/tools/board_inspection_tool.cpp:378
#: pcbnew/tools/board_inspection_tool.cpp:1209
msgid "Hole diameter resolution for:"
msgstr "Tar reda på håldiameter för:"
#: pcbnew/tools/board_inspection_tool.cpp:392
msgid "Hole Clearance"
msgstr "Isolationsavstånd för hål"
#: pcbnew/tools/board_inspection_tool.cpp:393
#: pcbnew/tools/board_inspection_tool.cpp:931
msgid "Hole clearance resolution for:"
msgstr "Tar reda på hålmarginal för:"
#: pcbnew/tools/board_inspection_tool.cpp:401
#: pcbnew/tools/board_inspection_tool.cpp:502
#: pcbnew/tools/board_inspection_tool.cpp:763
msgid "Items belong to the same net. Clearance is 0."
msgstr "Objekt tillhör samma nät. Clearance är 0."
#: pcbnew/tools/board_inspection_tool.cpp:410
#: pcbnew/tools/board_inspection_tool.cpp:430
#: pcbnew/tools/board_inspection_tool.cpp:447
#: pcbnew/tools/board_inspection_tool.cpp:462
#: pcbnew/tools/board_inspection_tool.cpp:511
#: pcbnew/tools/board_inspection_tool.cpp:531
#: pcbnew/tools/board_inspection_tool.cpp:730
#: pcbnew/tools/board_inspection_tool.cpp:744
#: pcbnew/tools/board_inspection_tool.cpp:775
#: pcbnew/tools/board_inspection_tool.cpp:872
#: pcbnew/tools/board_inspection_tool.cpp:896
#: pcbnew/tools/board_inspection_tool.cpp:940
#: pcbnew/tools/board_inspection_tool.cpp:969
#: pcbnew/tools/board_inspection_tool.cpp:1008
#: pcbnew/tools/board_inspection_tool.cpp:1037
#: pcbnew/tools/board_inspection_tool.cpp:1103
#, c-format
msgid "Resolved clearance: %s."
msgstr "Löst avstånd: %s."
#: pcbnew/tools/board_inspection_tool.cpp:416
#: pcbnew/tools/board_inspection_tool.cpp:1086
msgid "Physical hole clearance resolution for:"
msgstr "Tar reda på frigång mellan hål för:"
#: pcbnew/tools/board_inspection_tool.cpp:425
#: pcbnew/tools/board_inspection_tool.cpp:1098
msgid "No 'physical_hole_clearance' constraints defined."
msgstr "Ingen 'physical_hole_clearance'-begräsning definierad."
#: pcbnew/tools/board_inspection_tool.cpp:436
msgid "Hole to Hole"
msgstr "Hål till hål"
#: pcbnew/tools/board_inspection_tool.cpp:437
#: pcbnew/tools/board_inspection_tool.cpp:960
msgid "Hole to hole clearance resolution for:"
msgstr "Tar reda på frigång hål till hål för:"
#: pcbnew/tools/board_inspection_tool.cpp:451
msgid "Edge Clearance"
msgstr "Marginal för mönsterkortskant"
#: pcbnew/tools/board_inspection_tool.cpp:452
#: pcbnew/tools/board_inspection_tool.cpp:999
msgid "Edge clearance resolution for:"
msgstr "Tar reda på avstånd till mönsterkortets kant för:"
#: pcbnew/tools/board_inspection_tool.cpp:494
#: pcbnew/tools/board_inspection_tool.cpp:758
msgid "Clearance resolution for:"
msgstr "Tar reda på isolationsavstånd för:"
#: pcbnew/tools/board_inspection_tool.cpp:517
#: pcbnew/tools/board_inspection_tool.cpp:1020
msgid "Physical clearance resolution for:"
msgstr "Tar reda på fysisk frigång för:"
#: pcbnew/tools/board_inspection_tool.cpp:526
#: pcbnew/tools/board_inspection_tool.cpp:1032
msgid "No 'physical_clearance' constraints defined."
msgstr "Ingen 'physical_clearance'-begränsning definierad."
#: pcbnew/tools/board_inspection_tool.cpp:554
msgid "Select two items for a clearance resolution report."
msgstr "Välj två objekt för en rapport om upplösning av godkännande."
#: pcbnew/tools/board_inspection_tool.cpp:569
#: pcbnew/tools/board_inspection_tool.cpp:582
msgid "Cannot generate clearance report on empty group."
msgstr "Det går inte att generera godkännanderapport för tom grupp."
#: pcbnew/tools/board_inspection_tool.cpp:595
msgid "Clearance Report"
msgstr "Isolationsavståndsrapport"
#: pcbnew/tools/board_inspection_tool.cpp:635
msgid "Zone connection resolution for:"
msgstr "Tar reda på zonanslutning för:"
#: pcbnew/tools/board_inspection_tool.cpp:643
msgid "Thermal relief gap resolution for:"
msgstr "Tar reda på termiskt avlastningsgap för:"
#: pcbnew/tools/board_inspection_tool.cpp:652
#, c-format
msgid "Resolved thermal relief gap: %s."
msgstr "Gap för termisk avlastning: %s."
#: pcbnew/tools/board_inspection_tool.cpp:657
msgid "Spoke width resolution for:"
msgstr "Tar reda på termiska ekrarnas bredd för:"
#: pcbnew/tools/board_inspection_tool.cpp:666
#, c-format
msgid "Resolved thermal relief spoke width: %s."
msgstr "Fastställd bredd för termisk avlastnings eker: %s."
#: pcbnew/tools/board_inspection_tool.cpp:671
msgid "Spoke count resolution for:"
msgstr "Tar reda på antal termiska ekrar för:"
#: pcbnew/tools/board_inspection_tool.cpp:680
#, c-format
msgid "Resolved min thermal relief spoke count: %d."
msgstr "Tog reda på minsta antal ekrar för termisk avlastning: %d."
#: pcbnew/tools/board_inspection_tool.cpp:689
#: pcbnew/tools/board_inspection_tool.cpp:737
msgid "Zone clearance resolution for:"
msgstr "Tar reda på zonens isolationsavstånd för:"
#: pcbnew/tools/board_inspection_tool.cpp:693
#, c-format
msgid "Zone clearance: %s."
msgstr "Zonavstånd: %s."
#: pcbnew/tools/board_inspection_tool.cpp:703
#, c-format
msgid "Overridden by larger physical clearance from %s;clearance: %s."
msgstr "Åsidosatt av större fysisk frigång från %s, frigång: %s."
#: pcbnew/tools/board_inspection_tool.cpp:719
#, c-format
msgid "Overridden by larger physical hole clearance from %s;clearance: %s."
msgstr "Åsidosatt av större fysisk frigång för hål från %s, frigång: %s."
#: pcbnew/tools/board_inspection_tool.cpp:791
msgid "Diff Pair"
msgstr "Differentiellt par"
#: pcbnew/tools/board_inspection_tool.cpp:792
msgid "Diff pair gap resolution for:"
msgstr "Tar reda på mellanrum för differentiellt par:"
#: pcbnew/tools/board_inspection_tool.cpp:797
#, c-format
msgid "Resolved gap constraints: min %s; opt %s; max %s."
msgstr "Tog reda på begränsningar för mellanrum: min %s; opt %s max %s."
#: pcbnew/tools/board_inspection_tool.cpp:805
msgid "Diff pair max uncoupled length resolution for:"
msgstr "Tar reda på max okopplad längd för differentiellt par:"
#: pcbnew/tools/board_inspection_tool.cpp:810
msgid "No 'diff_pair_uncoupled' constraints defined."
msgstr ""
"Inga begränsningar definierade för differentiellt pars okopplade längd: "
"'diff_pair_uncoupled'."
#: pcbnew/tools/board_inspection_tool.cpp:842
#, c-format
msgid "Note: %s is tented; clearance will only be applied to holes."
msgstr "Notera: %s är täckt; frigång kommer bara att tillämpas på hål."
#: pcbnew/tools/board_inspection_tool.cpp:859
msgid "Silkscreen clearance resolution for:"
msgstr "Ta reda på anvisningstrycks marginal för:"
#: pcbnew/tools/board_inspection_tool.cpp:887
msgid "Courtyard clearance resolution for:"
msgstr "Tar reda på courtyard-marginal för:"
#: pcbnew/tools/board_inspection_tool.cpp:1015
msgid "Physical Clearances"
msgstr "Fysiska frigångsvärden"
#: pcbnew/tools/board_inspection_tool.cpp:1125
msgid "Select an item for a constraints resolution report."
msgstr "Välj ett objekt för en begränsningsupplösningsrapport."
#: pcbnew/tools/board_inspection_tool.cpp:1132
msgid "Constraints Report"
msgstr "Begränsningsrapport"
#: pcbnew/tools/board_inspection_tool.cpp:1160
#, c-format
msgid "Width constraints: min %s; opt %s; max %s."
msgstr "Breddbegränsningar: min %s; opt %s max %s."
#: pcbnew/tools/board_inspection_tool.cpp:1180
#: pcbnew/tools/board_inspection_tool.cpp:1218
#, c-format
msgid "Diameter constraints: min %s; opt %s; max %s."
msgstr "Diameterbegränsningar: min %s; opt %s; max %s."
#: pcbnew/tools/board_inspection_tool.cpp:1187
msgid "Via Annular Width"
msgstr "Via ringformad bredd"
#: pcbnew/tools/board_inspection_tool.cpp:1197
#, c-format
msgid "Annular width constraints: min %s; opt %s; max %s."
msgstr "Kragbreddsbegränsningar: min %s; opt %s; max %s."
#: pcbnew/tools/board_inspection_tool.cpp:1239
#, c-format
msgid "Text height constraints: min %s; opt %s; max %s."
msgstr "Texthöjdsbegränsningar: min %s; opt %s max %s."
#: pcbnew/tools/board_inspection_tool.cpp:1255
#, c-format
msgid "Text thickness constraints: min %s; opt %s; max %s."
msgstr "Begränsningar för textvikt (linjetjocklek): min %s; opt %s max %s."
#: pcbnew/tools/board_inspection_tool.cpp:1263
msgid "Keepouts"
msgstr "Spärrzoner"
#: pcbnew/tools/board_inspection_tool.cpp:1264
msgid "Keepout resolution for:"
msgstr "Tar reda på spärrzoner för:"
#: pcbnew/tools/board_inspection_tool.cpp:1274
#: pcbnew/tools/board_inspection_tool.cpp:1296
msgid "Report may be incomplete: some footprint courtyards are malformed."
msgstr "Rapporten kan vara ofullständig: vissa fotavtryck gårdar är felaktiga."
#: pcbnew/tools/board_inspection_tool.cpp:1275
#: pcbnew/tools/board_inspection_tool.cpp:1297
msgid "Run DRC for a full analysis."
msgstr "Kör DRC för en fullständig analys."
#: pcbnew/tools/board_inspection_tool.cpp:1281
msgid "Item <b>disallowed</b> at current location."
msgstr "Objekt <b> avvisades </b> på aktuell plats."
#: pcbnew/tools/board_inspection_tool.cpp:1283
msgid "Item allowed at current location."
msgstr "Objekt tillåtet på aktuell plats."
#: pcbnew/tools/board_inspection_tool.cpp:1287
msgid "Assertions"
msgstr "Försäkran"
#: pcbnew/tools/board_inspection_tool.cpp:1288
msgid "Assertions for:"
msgstr "Försäkran för:"
#: pcbnew/tools/convert_tool.cpp:67
msgid "Copy line width of first object"
msgstr "Kopiera linjebredd från första objektet"
#: pcbnew/tools/convert_tool.cpp:176
msgid "Create from Selection"
msgstr "Skapa från markering"
#: pcbnew/tools/convert_tool.cpp:419
msgid "Convert shapes to polygon"
msgstr "Konvertera former till polygon"
#: pcbnew/tools/convert_tool.cpp:421
msgid "Convert shapes to zone"
msgstr "Konvertera former till zon"
#: pcbnew/tools/convert_tool.cpp:975
msgid "Convert polygons to lines"
msgstr "Konvertera polygoner till linjer"
#: pcbnew/tools/convert_tool.cpp:1063
msgid "Create arc from line segment"
msgstr "Skapa båge från linjesegment"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:245
msgid "Layer Name"
msgstr "Lagernamn"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:260
msgid "Thickness (mm)"
msgstr "Tjocklek (mm)"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:261
msgid "Thickness (inches)"
msgstr "Tjocklek (tum)"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:262
msgid "Thickness (mils)"
msgstr "Tjocklek (mils)"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:277
msgid "Loss Tangent"
msgstr "Förlusttangent"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:300
msgid "Dielectric"
msgstr "Dielektrikum"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:353
msgid "Insert board stackup table"
msgstr "Sätt in mönsterkortets lageruppbyggnadstabell"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:397
msgid "BOARD CHARACTERISTICS"
msgstr "MÖNSTERKORTSKARAKTERISTIK"
#: pcbnew/tools/drawing_stackup_table_tool.cpp:412
msgid "Copper Layer Count: "
msgstr "Antal kopparlager: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:424
msgid "Board overall dimensions: "
msgstr "Mönsterkortets totala dimensioner: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:434
msgid "Min track/spacing: "
msgstr "Minsta ledarbredd/isolationsavstånd: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:444
msgid "Copper Finish: "
msgstr "Kopparytbehandling: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:452
msgid "Castellated pads: "
msgstr "Krenelerade lödytor: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:460
msgid "Board Thickness: "
msgstr "Korttjocklek: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:474
msgid "Min hole diameter: "
msgstr "Minsta håldiameter: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:483
msgid "Impedance Control: "
msgstr "Impedanskontroll: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:491
msgid "Plated Board Edge: "
msgstr "Pläterad kortkant: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:499
msgid "Edge card connectors: "
msgstr "Kortkantskontakter: "
#: pcbnew/tools/drawing_stackup_table_tool.cpp:507
msgid "Yes, Bevelled"
msgstr "Ja, avfasad"
#: pcbnew/tools/drawing_tool.cpp:89
msgid "Select Via Size"
msgstr "Välj Via storlek"
#: pcbnew/tools/drawing_tool.cpp:335 pcbnew/tools/drawing_tool.cpp:2048
msgid "Draw a line segment"
msgstr "Rita ett linjesegment"
#: pcbnew/tools/drawing_tool.cpp:416
msgid "Draw a text box"
msgstr "Rita en textruta"
#: pcbnew/tools/drawing_tool.cpp:416 pcbnew/tools/pcb_actions.cpp:93
msgid "Draw a rectangle"
msgstr "Rita en rektangel"
#: pcbnew/tools/drawing_tool.cpp:467 pcbnew/tools/pcb_actions.cpp:99
msgid "Draw a circle"
msgstr "Rita en cirkel"
#: pcbnew/tools/drawing_tool.cpp:517 pcbnew/tools/pcb_actions.cpp:105
msgid "Draw an arc"
msgstr "Rita en båge"
#: pcbnew/tools/drawing_tool.cpp:716
msgid "Place an image"
msgstr "Placera en bild"
#: pcbnew/tools/drawing_tool.cpp:973
msgid "Place a text"
msgstr "Lägg en text"
#: pcbnew/tools/drawing_tool.cpp:1310
msgid "Draw a dimension"
msgstr "Rita en dimension"
#: pcbnew/tools/drawing_tool.cpp:1522
msgid "No graphic items found in file."
msgstr "Inga grafiska objekt hittades i filen."
#: pcbnew/tools/drawing_tool.cpp:1573 pcbnew/tools/drawing_tool.cpp:1658
msgid "Place a DXF_SVG drawing"
msgstr "Placera en DXF_SVG-ritning"
#: pcbnew/tools/drawing_tool.cpp:1737
msgid "Move the footprint reference anchor"
msgstr "Flytta fotavtryckets referensankare"
#: pcbnew/tools/drawing_tool.cpp:3052
msgid "Via location violates DRC."
msgstr "Via-placering bryter mot DRC."
#: pcbnew/tools/drawing_tool.cpp:3255
msgid "Place via"
msgstr "Placera via"
#: pcbnew/tools/drc_tool.cpp:150
msgid "Refilling all zones..."
msgstr "Gör om fyllning av alla zoner ..."
#: pcbnew/tools/drc_tool.cpp:159
msgid "Schematic parity tests require a fully annotated schematic."
msgstr "Paritetskontroll av schema kräver att det är fullständigt numrerat."
#: pcbnew/tools/drc_tool.cpp:193
msgid "DRC"
msgstr "DRC"
#: pcbnew/tools/edit_tool.cpp:95
msgid "Positioning Tools"
msgstr "Placeringsverktyg"
#: pcbnew/tools/edit_tool.cpp:430
#, c-format
msgid "Unable to resize arc tracks of %s or greater."
msgstr "Kunde inte skala om bågformade ledare på %s eller mer."
#: pcbnew/tools/edit_tool.cpp:777
msgid "Drag Arc Track"
msgstr "Dra bågformad ledare"
#: pcbnew/tools/edit_tool.cpp:839
msgid "Edit track width/via size"
msgstr "Redigera ledarbredd / via-storlek"
#: pcbnew/tools/edit_tool.cpp:874
msgid "At least two straight track segments must be selected."
msgstr "Minst två raka ledarsegment måste väljas."
#: pcbnew/tools/edit_tool.cpp:878 pcbnew/tools/edit_tool.cpp:1153
msgid "Enter fillet radius:"
msgstr "Ange filéradie:"
#: pcbnew/tools/edit_tool.cpp:878 pcbnew/tools/edit_tool.cpp:1042
#: pcbnew/tools/pcb_actions.cpp:364
msgid "Fillet Tracks"
msgstr "Ledaravrundning"
#: pcbnew/tools/edit_tool.cpp:888 pcbnew/tools/edit_tool.cpp:1163
msgid ""
"A radius of zero was entered.\n"
"The fillet operation was not performed."
msgstr ""
"En radie på noll angavs.\n"
"Filetoperationen utfördes inte."
#: pcbnew/tools/edit_tool.cpp:1049
msgid "Unable to fillet the selected track segments."
msgstr "Det går inte att runda av de valda ledarsegmenten."
#: pcbnew/tools/edit_tool.cpp:1051
msgid "Some of the track segments could not be filleted."
msgstr "Vissa av ledarsegmenten kunde inte rundas av."
#: pcbnew/tools/edit_tool.cpp:1149
msgid "A shape with least two lines must be selected."
msgstr "En form med minst två linjer måste vara vald."
#: pcbnew/tools/edit_tool.cpp:1153 pcbnew/tools/edit_tool.cpp:1320
#: pcbnew/tools/pcb_actions.cpp:368
msgid "Fillet Lines"
msgstr "Avrundningslinjer"
#: pcbnew/tools/edit_tool.cpp:1323
msgid "Unable to fillet the selected lines."
msgstr "Det går inte att runda av de valda linjerna."
#: pcbnew/tools/edit_tool.cpp:1325
msgid "Some of the lines could not be filleted."
msgstr "Vissa av linjerna kunde inte rundas av."
#: pcbnew/tools/edit_tool.cpp:1493
msgid "Rotate"
msgstr "Rotera"
#: pcbnew/tools/edit_tool.cpp:1786 pcbnew/tools/pcb_actions.cpp:326
msgid "Change Side / Flip"
msgstr "Byt sida / vänd"
#: pcbnew/tools/edit_tool.cpp:2153
msgid "Move exact"
msgstr "Flytta exakt"
#: pcbnew/tools/edit_tool.cpp:2289
#, c-format
msgid "Duplicated %d item(s)"
msgstr "Duplicerade %d objekt"
#: pcbnew/tools/edit_tool.cpp:2515
msgid "Select reference point for the copy..."
msgstr "Välj referenspunkt för kopian ..."
#: pcbnew/tools/edit_tool.cpp:2516 pcbnew/tools/edit_tool.cpp:2533
msgid "Selection copied"
msgstr "Urvalet kopierades"
#: pcbnew/tools/edit_tool.cpp:2517
msgid "Copy canceled"
msgstr "Kopiering avbröts"
#: pcbnew/tools/edit_tool_move_fct.cpp:229
msgid "Pack footprints"
msgstr "Samla fotavtryck"
#: pcbnew/tools/edit_tool_move_fct.cpp:354
#, c-format
msgid ""
"Click to place %s (item %ld of %ld)\n"
"Press <esc> to cancel all; double-click to finish"
msgstr ""
"Klicka för att placera %s (objekt %ld av %ld)\n"
"Tryck på <esc> för att avbryta alla; dubbelklicka för att göra klart"
#: pcbnew/tools/edit_tool_move_fct.cpp:367
#, c-format
msgid "%s pad %s"
msgstr "%s lödyta %s"
#: pcbnew/tools/edit_tool_move_fct.cpp:404
msgid "Select reference point for move..."
msgstr "Välj referenspunkt för flytt ..."
#: pcbnew/tools/footprint_editor_control.cpp:348
msgid "_copy"
msgstr "_kopiera"
#: pcbnew/tools/footprint_editor_control.cpp:396
msgid "Change Footprint Name"
msgstr "Ändra fotavtrycksnamn"
#: pcbnew/tools/footprint_editor_control.cpp:406
msgid "Footprint name cannot be empty."
msgstr "Fotavtrycksnamnet kan inte vara tomt."
#: pcbnew/tools/footprint_editor_control.cpp:410
#, c-format
msgid "Footprint name '%s' already in use in library '%s'."
msgstr "Fotavtrycksnamn '%s' används redan i bibliotek '%s'."
#: pcbnew/tools/footprint_editor_control.cpp:725
msgid "No footprint problems found."
msgstr "Inga fotavtrycksproblem hittades."
#: pcbnew/tools/group_tool.cpp:43
msgid "Grouping"
msgstr "Gruppering"
#: pcbnew/tools/group_tool.cpp:64
msgid "Group is in inconsistent state:"
msgstr "Gruppen är i inkonsekvent tillstånd:"
#: pcbnew/tools/group_tool.cpp:144
msgid "Click on new member..."
msgstr "Klicka på ny medlem ..."
#: pcbnew/tools/pad_tool.cpp:154
msgid "Paste Pad Properties"
msgstr "Klistra in lödytans egenskaper"
#: pcbnew/tools/pad_tool.cpp:269
msgid "Push Pad Settings"
msgstr "Push Pad-inställningar"
#: pcbnew/tools/pad_tool.cpp:334
#, c-format
msgid ""
"Click on pad %s%d\n"
"Press <esc> to cancel all; double-click to finish"
msgstr ""
"Klicka på lödytan %s %d\n"
"Tryck på <esc> för att avbryta alla; dubbelklicka för att göra klart"
#: pcbnew/tools/pad_tool.cpp:357 pcbnew/tools/pad_tool.cpp:453
msgid "Renumber pads"
msgstr "Omnumrera lödytor"
#: pcbnew/tools/pad_tool.cpp:560
msgid "Place pad"
msgstr "Placera lödyta"
#: pcbnew/tools/pad_tool.cpp:582
#, fuzzy
msgid "Recombine pad"
msgstr "Rekombinera lödytor"
#: pcbnew/tools/pad_tool.cpp:600
#, c-format
msgid "Pad Edit Mode. Press %s again to exit."
msgstr "Pad Edit Mode. Tryck %s igen för att avsluta."
#: pcbnew/tools/pad_tool.cpp:605
#, c-format
msgid "Pad Edit Mode. Press %s to exit."
msgstr "Pad Edit Mode. Tryck på %s för att avsluta."
#: pcbnew/tools/pad_tool.cpp:698
msgid "Edit pad shapes"
msgstr "Redigera padformer"
#: pcbnew/tools/pcb_actions.cpp:48
msgid "Create Polygon from Selection..."
msgstr "Skapa polygon från markering..."
#: pcbnew/tools/pcb_actions.cpp:48
msgid "Creates a graphic polygon from the selection"
msgstr "Skapar en grafisk polygon från urvalet"
#: pcbnew/tools/pcb_actions.cpp:53
msgid "Create Zone from Selection..."
msgstr "Skapa zon från markering..."
#: pcbnew/tools/pcb_actions.cpp:53
msgid "Creates a copper zone from the selection"
msgstr "Skapar en kopparzon från urvalet"
#: pcbnew/tools/pcb_actions.cpp:58
msgid "Create Rule Area from Selection..."
msgstr "Skapa ett regelområde från markering..."
#: pcbnew/tools/pcb_actions.cpp:58
msgid "Creates a rule area from the selection"
msgstr "Skapar ett regelområde från urvalet"
#: pcbnew/tools/pcb_actions.cpp:63
msgid "Create Lines from Selection"
msgstr "Skapa linjer från markering"
#: pcbnew/tools/pcb_actions.cpp:63
msgid "Creates graphic lines from the selection"
msgstr "Skapar grafiska linjer från urvalet"
#: pcbnew/tools/pcb_actions.cpp:68
msgid "Create Arc from Selection"
msgstr "Skapa båge från markering"
#: pcbnew/tools/pcb_actions.cpp:68
msgid "Creates an arc from the selected line segment"
msgstr "Skapar en båge från det valda linjesegmentet"
#: pcbnew/tools/pcb_actions.cpp:73
msgid "Create Tracks from Selection"
msgstr "Skapa ledare från markering"
#: pcbnew/tools/pcb_actions.cpp:73
msgid "Creates tracks from the selected graphic lines"
msgstr "Skapar ledare från de valda grafiska linjerna"
#: pcbnew/tools/pcb_actions.cpp:82
msgid "Draw Line"
msgstr "Rita linje"
#: pcbnew/tools/pcb_actions.cpp:82
msgid "Draw a line"
msgstr "Rita en linje"
#: pcbnew/tools/pcb_actions.cpp:88
msgid "Draw Graphic Polygon"
msgstr "Rita grafisk polygon"
#: pcbnew/tools/pcb_actions.cpp:88
msgid "Draw a graphic polygon"
msgstr "Rita en grafisk polygon"
#: pcbnew/tools/pcb_actions.cpp:93
msgid "Draw Rectangle"
msgstr "Rita rektangel"
#: pcbnew/tools/pcb_actions.cpp:99
msgid "Draw Circle"
msgstr "Rita cirkel"
#: pcbnew/tools/pcb_actions.cpp:105
msgid "Draw Arc"
msgstr "Rita båge"
#: pcbnew/tools/pcb_actions.cpp:110
msgid "Add Board Characteristics"
msgstr "Lägg till kortkarakteristik"
#: pcbnew/tools/pcb_actions.cpp:111
msgid "Add a board characteristics table on a graphic layer"
msgstr "Lägg till mönsterkortskarakteristiktabell på ett grafiskt lager"
#: pcbnew/tools/pcb_actions.cpp:116
msgid "Add Stackup Table"
msgstr "Lägg till lageruppbyggnadstabell"
#: pcbnew/tools/pcb_actions.cpp:117
msgid "Add a board stackup table on a graphic layer"
msgstr "Lägg till en lageruppbyggnadstabell på ett grafiskt lager"
#: pcbnew/tools/pcb_actions.cpp:133
msgid "Add a wrapped text item"
msgstr "Lägg till ett textobjekt med radbrytning"
#: pcbnew/tools/pcb_actions.cpp:139
msgid "Add Aligned Dimension"
msgstr "Lägg till riktat mått"
#: pcbnew/tools/pcb_actions.cpp:139
msgid "Add an aligned linear dimension"
msgstr "Lägg till ett riktat linjärt mått"
#: pcbnew/tools/pcb_actions.cpp:144
msgid "Add Center Dimension"
msgstr "Lägg till centrummått"
#: pcbnew/tools/pcb_actions.cpp:144
msgid "Add a center dimension"
msgstr "Lägg till ett centrummått"
#: pcbnew/tools/pcb_actions.cpp:149
msgid "Add Radial Dimension"
msgstr "Lägg till radiellt mått"
#: pcbnew/tools/pcb_actions.cpp:149
msgid "Add a radial dimension"
msgstr "Lägg till ett radiellt mått"
#: pcbnew/tools/pcb_actions.cpp:154
msgid "Add Orthogonal Dimension"
msgstr "Lägg till ortogonalt mått"
#: pcbnew/tools/pcb_actions.cpp:154
msgid "Add an orthogonal dimension"
msgstr "Lägg till ett ortogonalt mått"
#: pcbnew/tools/pcb_actions.cpp:159
msgid "Add Leader"
msgstr "Lägg till Leader"
#: pcbnew/tools/pcb_actions.cpp:159
msgid "Add a leader dimension"
msgstr "Lägg till mått med hänvisningslinje"
#: pcbnew/tools/pcb_actions.cpp:170
msgid "Add Filled Zone"
msgstr "Lägg till fylld zon"
#: pcbnew/tools/pcb_actions.cpp:170
msgid "Add a filled zone"
msgstr "Lägg till en fylld zon"
#: pcbnew/tools/pcb_actions.cpp:176
msgid "Add Vias"
msgstr "Lägg till Vior"
#: pcbnew/tools/pcb_actions.cpp:176
msgid "Add free-standing vias"
msgstr "Lägg till fristående vior"
#: pcbnew/tools/pcb_actions.cpp:182
msgid "Add Rule Area"
msgstr "Lägg till regelområde"
#: pcbnew/tools/pcb_actions.cpp:182
msgid "Add a rule area (keepout)"
msgstr "Lägg till en regelzon (spärrzon)"
#: pcbnew/tools/pcb_actions.cpp:188
msgid "Add a Zone Cutout"
msgstr "Lägg till en zonutklippning"
#: pcbnew/tools/pcb_actions.cpp:188
msgid "Add a cutout area of an existing zone"
msgstr "Lägg till ett utklippsområde i en befintlig zon"
#: pcbnew/tools/pcb_actions.cpp:194
msgid "Add a Similar Zone"
msgstr "Lägg till en liknande zon"
#: pcbnew/tools/pcb_actions.cpp:194
msgid "Add a zone with the same settings as an existing zone"
msgstr "Lägg till en zon med samma inställningar som en befintlig zon"
#: pcbnew/tools/pcb_actions.cpp:200
msgid "Import Graphics..."
msgstr "Importera grafik..."
#: pcbnew/tools/pcb_actions.cpp:200
msgid "Import 2D drawing file"
msgstr "Importera 2D-ritningsfil"
#: pcbnew/tools/pcb_actions.cpp:206
msgid "Place the Footprint Anchor"
msgstr "Placera Footprint Anchor"
#: pcbnew/tools/pcb_actions.cpp:207
msgid "Set the coordinate origin point (anchor) of the footprint"
msgstr "Ställ in fotavtryckets origo (ankare)"
#: pcbnew/tools/pcb_actions.cpp:213
msgid "Increase Line Width"
msgstr "Öka linjens bredd"
#: pcbnew/tools/pcb_actions.cpp:213
msgid "Increase the line width"
msgstr "Öka linjebredden"
#: pcbnew/tools/pcb_actions.cpp:218
msgid "Decrease Line Width"
msgstr "Minska linjens bredd"
#: pcbnew/tools/pcb_actions.cpp:218
msgid "Decrease the line width"
msgstr "Minska linjebredden"
#: pcbnew/tools/pcb_actions.cpp:223
msgid "Switch Arc Posture"
msgstr "Byt bågställning"
#: pcbnew/tools/pcb_actions.cpp:223
msgid "Switch the arc posture"
msgstr "Byt bågens hållning"
#: pcbnew/tools/pcb_actions.cpp:228
msgid "Delete Last Point"
msgstr "Ta bort den sista punkten"
#: pcbnew/tools/pcb_actions.cpp:228
msgid "Delete the last point added to the current item"
msgstr "Ta bort den sista punkten som lagts till i det aktuella objektet"
#: pcbnew/tools/pcb_actions.cpp:233
msgid "Close Outline"
msgstr "Stäng disposition"
#: pcbnew/tools/pcb_actions.cpp:233
msgid "Close the in progress outline"
msgstr "Stäng den pågående konturen"
#: pcbnew/tools/pcb_actions.cpp:240
msgid "Show the design rules checker window"
msgstr "Visa fönstret för kontroll av designregler"
#: pcbnew/tools/pcb_actions.cpp:249
msgid "Open in Footprint Editor"
msgstr "Öppna i fotavtrycksredigeraren"
#: pcbnew/tools/pcb_actions.cpp:250 pcbnew/tools/pcb_actions.cpp:257
msgid "Opens the selected footprint in the Footprint Editor"
msgstr "Öppnar det valda fotavtrycket i fotavtrycksredigeraren"
#: pcbnew/tools/pcb_actions.cpp:264
msgid ""
"Selects a footprint by reference designator and places it under the cursor "
"for moving"
msgstr ""
"Väljer ett fotavtryck med referensbeteckning och placerar det under markören "
"för rörelse"
#: pcbnew/tools/pcb_actions.cpp:276
msgid "Move Individually"
msgstr "Flytta individuellt"
#: pcbnew/tools/pcb_actions.cpp:276
msgid "Moves the selected items one-by-one"
msgstr "Flyttar valda objekt individuellt"
#: pcbnew/tools/pcb_actions.cpp:281
msgid "Move with Reference"
msgstr "Flytta med referens"
#: pcbnew/tools/pcb_actions.cpp:282
msgid "Moves the selected item(s) with a specified starting point"
msgstr "Flyttar markerade objekt med en angiven startpunkt"
#: pcbnew/tools/pcb_actions.cpp:287
msgid "Copy with Reference"
msgstr "Kopiera med referens"
#: pcbnew/tools/pcb_actions.cpp:288
msgid "Copy selected item(s) to clipboard with a specified starting point"
msgstr "Kopiera markerade objekt till urklipp med en angiven startpunkt"
#: pcbnew/tools/pcb_actions.cpp:294
msgid "Duplicate and Increment"
msgstr "Duplicera och öka"
#: pcbnew/tools/pcb_actions.cpp:295
msgid "Duplicates the selected item(s), incrementing pad numbers"
msgstr "Duplicerar det eller de markerade objekten och ökar kodnumren"
#: pcbnew/tools/pcb_actions.cpp:301
msgid "Move Exactly..."
msgstr "Flytta exakt ..."
#: pcbnew/tools/pcb_actions.cpp:301
msgid "Moves the selected item(s) by an exact amount"
msgstr "Flyttar markerade objekt med en exakt mängd"
#: pcbnew/tools/pcb_actions.cpp:307
msgid "Create Array..."
msgstr "Skapa matris ..."
#: pcbnew/tools/pcb_actions.cpp:307
msgid "Create array"
msgstr "Skapa matris"
#: pcbnew/tools/pcb_actions.cpp:320
msgid "Rotates selected item(s) counterclockwise"
msgstr "Rotera valda objekt moturs"
#: pcbnew/tools/pcb_actions.cpp:326
msgid "Flips selected item(s) to opposite side of board"
msgstr "Vänd markerade objekt till motsatt sida av mönsterkortet"
#: pcbnew/tools/pcb_actions.cpp:331
msgid "Mirrors selected item across the Y axis"
msgstr "Spegelvänder valt objekt över Y-axeln"
#: pcbnew/tools/pcb_actions.cpp:336
msgid "Mirrors selected item across the X axis"
msgstr "Spegelvänder valt objekt över X-axeln"
#: pcbnew/tools/pcb_actions.cpp:348
msgid "Pack and Move Footprints"
msgstr "Samla och flytta fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:349
msgid ""
"Sorts selected footprints by reference, packs based on size and initiates "
"movement"
msgstr ""
"Sorterar de valda fotavtrycken efter referensbeteckning, packar baserat på "
"storlek och påbörjar flyttning"
#: pcbnew/tools/pcb_actions.cpp:355
msgid "Skip item"
msgstr "Hoppa över objekt"
#: pcbnew/tools/pcb_actions.cpp:360
msgid "Change Track Width"
msgstr "Ändra ledarbredd"
#: pcbnew/tools/pcb_actions.cpp:360
msgid "Updates selected track & via sizes"
msgstr "Uppdaterar valda ledar- och via-storlekar"
#: pcbnew/tools/pcb_actions.cpp:364
msgid "Adds arcs tangent to the selected straight track segments"
msgstr "Lägger till bågar som tangerar de valda raka ledarsegmenten"
#: pcbnew/tools/pcb_actions.cpp:368
msgid "Adds arcs tangent to the selected lines"
msgstr "Lägger till bågar som tangerar de valda linjerna"
#: pcbnew/tools/pcb_actions.cpp:373
msgid "Delete Full Track"
msgstr "Ta bort hela ledaren"
#: pcbnew/tools/pcb_actions.cpp:373
msgid "Deletes selected item(s) and copper connections"
msgstr "Raderar valda objekt och kopparanslutningar"
#: pcbnew/tools/pcb_actions.cpp:387
msgid "Show Footprint Tree"
msgstr "Visa biblioteksträd för fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:392
msgid "Hide Footprint Tree"
msgstr "Göm biblioteksträd för fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:398
msgid "New Footprint..."
msgstr "Nytt fotavtryck ..."
#: pcbnew/tools/pcb_actions.cpp:398
msgid "Create a new, empty footprint"
msgstr "Skapa ett nytt, tomt fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:403
msgid "Create Footprint..."
msgstr "Skapa fotavtryck ..."
#: pcbnew/tools/pcb_actions.cpp:403
msgid "Create a new footprint using the Footprint Wizard"
msgstr "Skapa ett nytt fotavtryck med hjälp av guiden Fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:408
msgid "Edit Footprint"
msgstr "Redigera fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:408
msgid "Show selected footprint on editor canvas"
msgstr "Visa markerat fotavtryck på redigerarens rityta"
#: pcbnew/tools/pcb_actions.cpp:413
msgid "Duplicate Footprint"
msgstr "Duplicera fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:413
msgid "Make a copy of the selected footprint"
msgstr "Gör en kopia av det valda fotavtrycket"
#: pcbnew/tools/pcb_actions.cpp:418
msgid "Rename Footprint..."
msgstr "Byt namn på fotavtryck..."
#: pcbnew/tools/pcb_actions.cpp:418
msgid "Rename the selected footprint"
msgstr "Byt namn på det valda fotavtrycket"
#: pcbnew/tools/pcb_actions.cpp:423
msgid "Delete Footprint from Library"
msgstr "Ta bort Footprint från biblioteket"
#: pcbnew/tools/pcb_actions.cpp:428
msgid "Cut Footprint"
msgstr "Skär fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:433
msgid "Copy Footprint"
msgstr "Kopiera fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:438
msgid "Paste Footprint"
msgstr "Klistra in fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:443
msgid "Import Footprint..."
msgstr "Importera fotavtryck ..."
#: pcbnew/tools/pcb_actions.cpp:443
msgid "Import footprint from file"
msgstr "Importera fotavtryck från fil"
#: pcbnew/tools/pcb_actions.cpp:448
msgid "Export Footprint..."
msgstr "Exportera fotavtryck ..."
#: pcbnew/tools/pcb_actions.cpp:448
msgid "Export footprint to file"
msgstr "Exportera fotavtryck till fil"
#: pcbnew/tools/pcb_actions.cpp:453
msgid "Footprint Properties..."
msgstr "Egenskaper för fotavtryck ..."
#: pcbnew/tools/pcb_actions.cpp:453
msgid "Edit footprint properties"
msgstr "Ändra egenskaper för fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:458
msgid "Show the footprint checker window"
msgstr "Visa fönstret för fotavtryckskontroll"
#: pcbnew/tools/pcb_actions.cpp:465
msgid "Update Footprint..."
msgstr "Uppdatera fotavtryck..."
#: pcbnew/tools/pcb_actions.cpp:466
msgid "Update footprint to include any changes from the library"
msgstr "Uppdatera fotavtryck så att alla ändringar från biblioteket inkluderas"
#: pcbnew/tools/pcb_actions.cpp:471
msgid "Update Footprints from Library..."
msgstr "Uppdatera fotavtryck från biblioteket..."
#: pcbnew/tools/pcb_actions.cpp:472
msgid "Update footprints to include any changes from the library"
msgstr "Uppdatera fotavtryck så att alla ändringar från biblioteket inkluderas"
#: pcbnew/tools/pcb_actions.cpp:477
msgid "Remove Unused Pads..."
msgstr "Ta bort oanvända lödytor..."
#: pcbnew/tools/pcb_actions.cpp:478
msgid ""
"Remove or restore the unconnected inner layers on through hole pads and vias"
msgstr ""
"Ta bort eller återställ kragar på de icke anslutna inre lagren på "
"hålmonteringshål och vior"
#: pcbnew/tools/pcb_actions.cpp:483
msgid "Assign a different footprint from the library"
msgstr "Tilldela ett annat fotavtryck från biblioteket"
#: pcbnew/tools/pcb_actions.cpp:488
msgid "Change Footprints..."
msgstr "Ändra fotavtryck ..."
#: pcbnew/tools/pcb_actions.cpp:488
msgid "Assign different footprints from the library"
msgstr "Tilldela olika fotavtryck från biblioteket"
#: pcbnew/tools/pcb_actions.cpp:493
msgid "Swap Layers..."
msgstr "Byt lager ..."
#: pcbnew/tools/pcb_actions.cpp:493
msgid "Move tracks or drawings from one layer to another"
msgstr "Flytta ledare eller ritningar från ett lager till ett annat"
#: pcbnew/tools/pcb_actions.cpp:498
msgid "Edit Track & Via Properties..."
msgstr "Ändra egenskaper för ledare och vior..."
#: pcbnew/tools/pcb_actions.cpp:499
msgid "Edit track and via properties globally across board"
msgstr "Ändra ledar- och viaegenskaper globalt över hela kortet"
#: pcbnew/tools/pcb_actions.cpp:505
msgid "Edit Text and graphics properties globally across board"
msgstr "Redigera text- och grafikegenskaper över hela världen"
#: pcbnew/tools/pcb_actions.cpp:510
msgid "Global Deletions..."
msgstr "Globala raderingar ..."
#: pcbnew/tools/pcb_actions.cpp:511
msgid "Delete tracks, footprints and graphic items from board"
msgstr "Ta bort ledare, fotavtryck och grafiska objekt från mönsterkortet"
#: pcbnew/tools/pcb_actions.cpp:516
msgid "Cleanup Tracks & Vias..."
msgstr "Städa upp ledningar och vior..."
#: pcbnew/tools/pcb_actions.cpp:517
msgid "Cleanup redundant items, shorting items, etc."
msgstr "Upprensning av överflödiga föremål, kortslutningar etc."
#: pcbnew/tools/pcb_actions.cpp:522
msgid "Cleanup Graphics..."
msgstr "Städa upp grafik..."
#: pcbnew/tools/pcb_actions.cpp:523
msgid "Cleanup redundant items, etc."
msgstr "Upprensning av överflödiga föremål etc."
#: pcbnew/tools/pcb_actions.cpp:530
msgid "Add Microwave Gap"
msgstr "Lägg till mikrovågsgap"
#: pcbnew/tools/pcb_actions.cpp:530
msgid "Create gap of specified length for microwave applications"
msgstr "Skapa mellanrum med specificerad längd för mikrovågsapplikationer"
#: pcbnew/tools/pcb_actions.cpp:535
msgid "Add Microwave Stub"
msgstr "Lägg till mikrovågsstubb"
#: pcbnew/tools/pcb_actions.cpp:536
msgid "Create stub of specified length for microwave applications"
msgstr "Skapa stub med angiven längd för mikrovågsapplikationer"
#: pcbnew/tools/pcb_actions.cpp:541
msgid "Add Microwave Arc Stub"
msgstr "Lägg till mikrovågsbåge"
#: pcbnew/tools/pcb_actions.cpp:542
msgid "Create stub (arc) of specified size for microwave applications"
msgstr "Skapa stub (båge) av angiven storlek för mikrovågsapplikationer"
#: pcbnew/tools/pcb_actions.cpp:547
msgid "Add Microwave Polygonal Shape"
msgstr "Lägg till mikrovågsformad polygonal form"
#: pcbnew/tools/pcb_actions.cpp:548
msgid "Create a microwave polygonal shape from a list of vertices"
msgstr "Skapa en polygonal form av mikrovågsugn från en lista med hörn"
#: pcbnew/tools/pcb_actions.cpp:553
msgid "Add Microwave Line"
msgstr "Lägg till mikrovågsledare"
#: pcbnew/tools/pcb_actions.cpp:554
msgid "Create line of specified length for microwave applications"
msgstr "Skapa rad med angiven längd för mikrovågsapplikationer"
#: pcbnew/tools/pcb_actions.cpp:562
msgid "Copy Pad Properties to Default"
msgstr "Kopiera lödytans egenskaper till standardegenskaperna för lödytor"
#: pcbnew/tools/pcb_actions.cpp:562
msgid "Copy current pad's properties"
msgstr "Kopiera den aktuella lödytans egenskaper"
#: pcbnew/tools/pcb_actions.cpp:567
msgid "Paste Default Pad Properties to Selected"
msgstr "Klistra in standardegenskaperna för lödytor till valda objekt"
#: pcbnew/tools/pcb_actions.cpp:568
msgid "Replace the current pad's properties with those copied earlier"
msgstr ""
"Ersätt den aktuella lödytans egenskaper med dem som har kopierats tidigare"
#: pcbnew/tools/pcb_actions.cpp:573
msgid "Push Pad Properties to Other Pads..."
msgstr "Överför lödyte-egenskaper till andra lödytor..."
#: pcbnew/tools/pcb_actions.cpp:574
msgid "Copy the current pad's properties to other pads"
msgstr "Kopiera den aktuella lödytans egenskaper till andra lödytor"
#: pcbnew/tools/pcb_actions.cpp:579
msgid "Renumber Pads..."
msgstr "Omnumrera lödytor..."
#: pcbnew/tools/pcb_actions.cpp:580
msgid "Renumber pads by clicking on them in the desired order"
msgstr "Numrera kuddar genom att klicka på dem i önskad ordning"
#: pcbnew/tools/pcb_actions.cpp:585
msgid "Add Pad"
msgstr "Lägg till Pad"
#: pcbnew/tools/pcb_actions.cpp:585
msgid "Add a pad"
msgstr "Lägg till en lödyta"
#: pcbnew/tools/pcb_actions.cpp:591
msgid "Edit Pad as Graphic Shapes"
msgstr "Redigera pad som grafiska former"
#: pcbnew/tools/pcb_actions.cpp:592
msgid "Ungroups a custom-shaped pad for editing as individual graphic shapes"
msgstr ""
"Delar upp en anpassad lödyta för redigering som enskilda grafiska former"
#: pcbnew/tools/pcb_actions.cpp:598
msgid "Finish Pad Edit"
msgstr "Avsluta redigering av lödyta"
#: pcbnew/tools/pcb_actions.cpp:599
msgid "Regroups all touching graphic shapes into the edited pad"
msgstr "Omgrupperar alla rörande grafiska former i den redigerade padden"
#: pcbnew/tools/pcb_actions.cpp:604
msgid "Default Pad Properties..."
msgstr "Standardegenskaper för lödytor..."
#: pcbnew/tools/pcb_actions.cpp:605
msgid "Edit the pad properties used when creating new pads"
msgstr "Redigera lödyte-egenskaperna som används när du skapar nya lödytor"
#: pcbnew/tools/pcb_actions.cpp:613
msgid "Refresh Plugins"
msgstr "Uppdatera insticksmoduler"
#: pcbnew/tools/pcb_actions.cpp:613
msgid "Reload all python plugins and refresh plugin menus"
msgstr ""
"Ladda om alla python-insticksmoduler och uppdatera insticksmoduls menyer"
#: pcbnew/tools/pcb_actions.cpp:619
msgid "Reveal Plugin Folder in Finder"
msgstr "Avslöja plugin-mappen i Finder"
#: pcbnew/tools/pcb_actions.cpp:619
msgid "Reveals the plugins folder in a Finder window"
msgstr "Visar insticksmodulskatalogen i ett Finder-fönster"
#: pcbnew/tools/pcb_actions.cpp:629
msgid "Board Setup..."
msgstr "Mönsterkortsinställningar..."
#: pcbnew/tools/pcb_actions.cpp:630
msgid "Edit board setup including layers, design rules and various defaults"
msgstr ""
"Redigera kortinställningar inklusive lager, designregler och olika "
"standardinställningar"
#: pcbnew/tools/pcb_actions.cpp:635
msgid "Import Netlist..."
msgstr "Importera nätlista..."
#: pcbnew/tools/pcb_actions.cpp:635
msgid "Read netlist and update board connectivity"
msgstr "Läs nätlista och uppdatera kortanslutningar"
#: pcbnew/tools/pcb_actions.cpp:640
msgid "Import Specctra Session..."
msgstr "Importera Specctra-session..."
#: pcbnew/tools/pcb_actions.cpp:640
msgid "Import routed Specctra session (*.ses) file"
msgstr "Importera dirigerad Specctra-session (*.ses) -fil"
#: pcbnew/tools/pcb_actions.cpp:645
msgid "Export Specctra DSN..."
msgstr "Exportera Specctra-DSN..."
#: pcbnew/tools/pcb_actions.cpp:645
msgid "Export Specctra DSN routing info"
msgstr "Exportera Specctra DSN-routningsinformation"
#: pcbnew/tools/pcb_actions.cpp:650
msgid "Gerbers (.gbr)..."
msgstr "Gerbers (.gbr) ..."
#: pcbnew/tools/pcb_actions.cpp:650
msgid "Generate Gerbers for fabrication"
msgstr "Generera Gerbers för tillverkning"
#: pcbnew/tools/pcb_actions.cpp:655
msgid "Drill Files (.drl)..."
msgstr "Drill Files (.drl) ..."
#: pcbnew/tools/pcb_actions.cpp:655
msgid "Generate Excellon drill file(s)"
msgstr "Skapa Excellon borrfil (er)"
#: pcbnew/tools/pcb_actions.cpp:660
msgid "Component Placement (.pos)..."
msgstr "Komponentplacering (.pos)..."
#: pcbnew/tools/pcb_actions.cpp:661
msgid "Generate component placement file(s) for pick and place"
msgstr "Generera komponentpositioneringsfil(er) för pick and place"
#: pcbnew/tools/pcb_actions.cpp:666
msgid "Footprint Report (.rpt)..."
msgstr "Footprint Report (.rpt) ..."
#: pcbnew/tools/pcb_actions.cpp:667
msgid "Create report of all footprints from current board"
msgstr "Skapa rapport över alla fotavtryck från aktuellt mönsterkort"
#: pcbnew/tools/pcb_actions.cpp:672
msgid "IPC-D-356 Netlist File..."
msgstr "IPC-D-356 nätlistefil ..."
#: pcbnew/tools/pcb_actions.cpp:672
msgid "Generate IPC-D-356 netlist file"
msgstr "Skapa IPC-D-356 nätlistefil"
#: pcbnew/tools/pcb_actions.cpp:677
msgid "BOM..."
msgstr "Komponentlista..."
#: pcbnew/tools/pcb_actions.cpp:677
msgid "Create bill of materials from board"
msgstr "Skapa materialförteckning från mönsterkortet"
#: pcbnew/tools/pcb_actions.cpp:684
msgid "Switch Track Width to Next"
msgstr "Byt till nästa ledarbredd"
#: pcbnew/tools/pcb_actions.cpp:684
msgid "Change track width to next pre-defined size"
msgstr "Byt ledarbredd till nästa fördefinierade bredd"
#: pcbnew/tools/pcb_actions.cpp:689
msgid "Switch Track Width to Previous"
msgstr "Byt till föregående ledarbredd"
#: pcbnew/tools/pcb_actions.cpp:690
msgid "Change track width to previous pre-defined size"
msgstr "Byt till föregående fördefinierad ledarbredd"
#: pcbnew/tools/pcb_actions.cpp:695
msgid "Increase Via Size"
msgstr "Öka via storlek"
#: pcbnew/tools/pcb_actions.cpp:695
msgid "Change via size to next pre-defined size"
msgstr "Byt viastorlek till nästa fördefinierade storlek"
#: pcbnew/tools/pcb_actions.cpp:700
msgid "Decrease Via Size"
msgstr "Minska via storlek"
#: pcbnew/tools/pcb_actions.cpp:700
msgid "Change via size to previous pre-defined size"
msgstr "Byt viastorlek till föregående fördefinierade storlek"
#: pcbnew/tools/pcb_actions.cpp:714
msgid "Merge Zones"
msgstr "Slå samman zoner"
#: pcbnew/tools/pcb_actions.cpp:714
msgid "Merge zones"
msgstr "Slå samman zoner"
#: pcbnew/tools/pcb_actions.cpp:718
msgid "Duplicate Zone onto Layer..."
msgstr "Duplicera zon till lager ..."
#: pcbnew/tools/pcb_actions.cpp:718
msgid "Duplicate zone outline onto a different layer"
msgstr "Duplicera zonkonturer på ett annat lager"
#: pcbnew/tools/pcb_actions.cpp:724
msgid "Add Footprint"
msgstr "Lägg till fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:724
msgid "Add a footprint"
msgstr "Lägg till ett fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:729
msgid "Drill/Place File Origin"
msgstr "Borr- / placeringsfilens origo"
#: pcbnew/tools/pcb_actions.cpp:730
msgid "Place origin point for drill files and component placement files"
msgstr "Placera origo för borr- och komponentplaceringsfiler"
#: pcbnew/tools/pcb_actions.cpp:736
msgid "Toggle Lock"
msgstr "Växla lås"
#: pcbnew/tools/pcb_actions.cpp:736
msgid "Lock or unlock selected items"
msgstr "Lås eller lås upp valda objekt"
#: pcbnew/tools/pcb_actions.cpp:743
msgid ""
"Limit actions to horizontal, vertical, or 45 degrees from the starting point"
msgstr ""
"Begränsa åtgärder till horisontellt, vertikalt, eller 45 graders vinkel från "
"startpunkten"
#: pcbnew/tools/pcb_actions.cpp:748
msgid "Prevent items from being moved and/or resized on the canvas"
msgstr "Förhindra att objekt flyttas och/eller skalas om på ritbordet"
#: pcbnew/tools/pcb_actions.cpp:753
msgid "Allow items to be moved and/or resized on the canvas"
msgstr "Tillåt att objekt flyttas och/eller skalas om på ritbordet"
#: pcbnew/tools/pcb_actions.cpp:758
msgid "Group the selected items so that they are treated as a single item"
msgstr "Gruppera markerade objekt så de hanteras som ett objekt"
#: pcbnew/tools/pcb_actions.cpp:763
msgid "Ungroup"
msgstr "Dela upp"
#: pcbnew/tools/pcb_actions.cpp:763
msgid "Ungroup any selected groups"
msgstr "Avgruppera markerade grupper"
#: pcbnew/tools/pcb_actions.cpp:768
msgid "Remove Items"
msgstr "Ta bort objekt"
#: pcbnew/tools/pcb_actions.cpp:768
msgid "Remove items from group"
msgstr "Ta bort objekt från gruppen"
#: pcbnew/tools/pcb_actions.cpp:773
msgid "Enter Group"
msgstr "Gå in i grupp"
#: pcbnew/tools/pcb_actions.cpp:773
msgid "Enter the group to edit items"
msgstr "Gå in i gruppen för att redigera objekt"
#: pcbnew/tools/pcb_actions.cpp:778
msgid "Leave Group"
msgstr "Lämna grupp"
#: pcbnew/tools/pcb_actions.cpp:778
msgid "Leave the current group"
msgstr "Lämna den nuvarande gruppen"
#: pcbnew/tools/pcb_actions.cpp:783
msgid "Append Board..."
msgstr "Lägg till kort..."
#: pcbnew/tools/pcb_actions.cpp:783
msgid "Open another board and append its contents to this board"
msgstr "Öppna ett till mönsterkort och lägg dess innehåll till detta kort"
#: pcbnew/tools/pcb_actions.cpp:795
msgid "Toggle Last Net Highlight"
msgstr "Växla senaste nätmarkering"
#: pcbnew/tools/pcb_actions.cpp:795
msgid "Toggle between last two highlighted nets"
msgstr "Växla mellan de två sista markerade näten"
#: pcbnew/tools/pcb_actions.cpp:805
msgid "Toggle Net Highlight"
msgstr "Växla nätmarkering"
#: pcbnew/tools/pcb_actions.cpp:805
msgid "Toggle net highlighting"
msgstr "Växla nätmarkering"
#: pcbnew/tools/pcb_actions.cpp:810
msgid "Highlight all copper items on the selected net(s)"
msgstr "Markera alla kopparobjekt i markerade nät"
#: pcbnew/tools/pcb_actions.cpp:818
msgid "Hide Net in Ratsnest"
msgstr "Göm nät bland nätlinjer"
#: pcbnew/tools/pcb_actions.cpp:819
msgid "Hide the selected net in the ratsnest of unconnected net lines/arcs"
msgstr "Dölj det valda nätet bland nätlinjerna för icke anslutna nät"
#: pcbnew/tools/pcb_actions.cpp:824
msgid "Show Net in Ratsnest"
msgstr "Visa nät bland nätlinjer"
#: pcbnew/tools/pcb_actions.cpp:825
msgid "Show the selected net in the ratsnest of unconnected net lines/arcs"
msgstr "Visa det valda nätet bland nätlinjerna för icke anslutna nät"
#: pcbnew/tools/pcb_actions.cpp:830
msgid "Switch to Schematic Editor"
msgstr "Byt till kretsschemaredigerare"
#: pcbnew/tools/pcb_actions.cpp:830
msgid "Open in schematic editor"
msgstr "Öppna i kretsschemaredigeraren"
#: pcbnew/tools/pcb_actions.cpp:839
msgid "Local Ratsnest"
msgstr "Lokala nätlinjer"
#: pcbnew/tools/pcb_actions.cpp:839
msgid "Toggle ratsnest display of selected item(s)"
msgstr "Växla visning av nätlinjer för markerade objekt"
#: pcbnew/tools/pcb_actions.cpp:850
msgid "Show the net inspector"
msgstr "Visa nätinspektören"
#: pcbnew/tools/pcb_actions.cpp:860
msgid "Show Appearance Manager"
msgstr "Visa utseendehanteraren"
#: pcbnew/tools/pcb_actions.cpp:860
msgid "Show/hide the appearance manager"
msgstr "Visa / dölj utseendehanteraren"
#: pcbnew/tools/pcb_actions.cpp:865
msgid "Show Properties Manager"
msgstr "Visa dialogruta för egenskaper"
#: pcbnew/tools/pcb_actions.cpp:865
msgid "Show/hide the properties manager"
msgstr "Visa / dölj dialogruta för egenskaper"
#: pcbnew/tools/pcb_actions.cpp:870
msgid "Flip Board View"
msgstr "Spegelvänd visning av mönsterkort"
#: pcbnew/tools/pcb_actions.cpp:870
msgid "View board from the opposite side"
msgstr "Visa kortet från motsatt sida"
#: pcbnew/tools/pcb_actions.cpp:876
msgid "Show Ratsnest"
msgstr "Visa nätlinjer"
#: pcbnew/tools/pcb_actions.cpp:876
msgid "Show board ratsnest"
msgstr "Visa nätlinjer för mönsterkortet"
#: pcbnew/tools/pcb_actions.cpp:881
msgid "Curved Ratsnest Lines"
msgstr "Bågformade nätlinjer"
#: pcbnew/tools/pcb_actions.cpp:886
msgid "Ratsnest Mode (3-state)"
msgstr "Nätlinje-läge (3 lägen)"
#: pcbnew/tools/pcb_actions.cpp:887
msgid ""
"Cycle between showing ratsnests for all layers, just visible layers, and none"
msgstr ""
"Byt mellan att visa nätlinjer för alla lager, endast synliga lager och inga "
"lager"
#: pcbnew/tools/pcb_actions.cpp:891
msgid "Net Color Mode (3-state)"
msgstr "Färgläge för nät (3-läge)"
#: pcbnew/tools/pcb_actions.cpp:892
msgid ""
"Cycle between using net and netclass colors for all nets, just ratsnests, "
"and none"
msgstr ""
"Växla mellan att använda nät- och nätklassfärger för alla nät, bara "
"nätlinjer eller inget"
#: pcbnew/tools/pcb_actions.cpp:897
msgid "Sketch Tracks"
msgstr "Skissa ledare"
#: pcbnew/tools/pcb_actions.cpp:897
msgid "Show tracks in outline mode"
msgstr "Visa ledare i konturläge"
#: pcbnew/tools/pcb_actions.cpp:902
msgid "Sketch Pads"
msgstr "Skissa lödytor"
#: pcbnew/tools/pcb_actions.cpp:902
msgid "Show pads in outline mode"
msgstr "Visa lödytor i konturläge"
#: pcbnew/tools/pcb_actions.cpp:907
msgid "Sketch Vias"
msgstr "Skissa vior"
#: pcbnew/tools/pcb_actions.cpp:907
msgid "Show vias in outline mode"
msgstr "Visa vior i konturläge"
#: pcbnew/tools/pcb_actions.cpp:912
msgid "Sketch Graphic Items"
msgstr "Skissa grafiska objekt"
#: pcbnew/tools/pcb_actions.cpp:912
msgid "Show graphic items in outline mode"
msgstr "Visa grafiska objekt i konturläge"
#: pcbnew/tools/pcb_actions.cpp:917
msgid "Sketch Text Items"
msgstr "Skissa textobjekt"
#: pcbnew/tools/pcb_actions.cpp:917
msgid "Show footprint texts in line mode"
msgstr "Visa fotavtryckstexter i linjeläge"
#: pcbnew/tools/pcb_actions.cpp:927
msgid "Draw Zone Fills"
msgstr "Rita zonfyllningar"
#: pcbnew/tools/pcb_actions.cpp:927
msgid "Show filled areas of zones"
msgstr "Visa zoner som fyllda områden"
#: pcbnew/tools/pcb_actions.cpp:932
msgid "Draw Zone Outlines"
msgstr "Rita zonkonturer"
#: pcbnew/tools/pcb_actions.cpp:932
msgid "Show only zone boundaries"
msgstr "Visa zoner som gränser"
#: pcbnew/tools/pcb_actions.cpp:937
msgid "Draw Zone Fill Fracture Borders"
msgstr "Rita brottlinjer i zonfyllning"
#: pcbnew/tools/pcb_actions.cpp:942
msgid "Draw Zone Fill Triangulation"
msgstr "Rita zonfyllningstriangulering"
#: pcbnew/tools/pcb_actions.cpp:948
msgid "Toggle Zone Display"
msgstr "Växla zonvisning"
#: pcbnew/tools/pcb_actions.cpp:949
msgid "Cycle between showing zone fills and just their outlines"
msgstr "Byt mellan att visa zonfyllningar och att bara visa deras konturer"
#: pcbnew/tools/pcb_actions.cpp:957
msgid "Switch to Component (F.Cu) layer"
msgstr "Byt till komponentlagret (F.Cu)"
#: pcbnew/tools/pcb_actions.cpp:963
msgid "Switch to Inner layer 1"
msgstr "Byt till inre lager 1"
#: pcbnew/tools/pcb_actions.cpp:969
msgid "Switch to Inner layer 2"
msgstr "Byt till innerlager 2"
#: pcbnew/tools/pcb_actions.cpp:975
msgid "Switch to Inner layer 3"
msgstr "Byt till innerlager 3"
#: pcbnew/tools/pcb_actions.cpp:981
msgid "Switch to Inner layer 4"
msgstr "Byt till innerlager 4"
#: pcbnew/tools/pcb_actions.cpp:987
msgid "Switch to Inner layer 5"
msgstr "Byt till innerlager 5"
#: pcbnew/tools/pcb_actions.cpp:993
msgid "Switch to Inner layer 6"
msgstr "Byt till innerlager 6"
#: pcbnew/tools/pcb_actions.cpp:998
msgid "Switch to Inner layer 7"
msgstr "Byt till innerlager 7"
#: pcbnew/tools/pcb_actions.cpp:1003
msgid "Switch to Inner layer 8"
msgstr "Byt till innerlager 8"
#: pcbnew/tools/pcb_actions.cpp:1008
msgid "Switch to Inner layer 9"
msgstr "Byt till innerlager 9"
#: pcbnew/tools/pcb_actions.cpp:1013
msgid "Switch to Inner layer 10"
msgstr "Byt till innerlager 10"
#: pcbnew/tools/pcb_actions.cpp:1018
msgid "Switch to Inner layer 11"
msgstr "Byt till innerlager 11"
#: pcbnew/tools/pcb_actions.cpp:1023
msgid "Switch to Inner layer 12"
msgstr "Byt till innerlager 12"
#: pcbnew/tools/pcb_actions.cpp:1028
msgid "Switch to Inner layer 13"
msgstr "Byt till innerlager 13"
#: pcbnew/tools/pcb_actions.cpp:1033
msgid "Switch to Inner layer 14"
msgstr "Byt till innerlager 14"
#: pcbnew/tools/pcb_actions.cpp:1038
msgid "Switch to Inner layer 15"
msgstr "Byt till innerlager 15"
#: pcbnew/tools/pcb_actions.cpp:1043
msgid "Switch to Inner layer 16"
msgstr "Byt till innerlager 16"
#: pcbnew/tools/pcb_actions.cpp:1048
msgid "Switch to Inner layer 17"
msgstr "Byt till innerlager 17"
#: pcbnew/tools/pcb_actions.cpp:1053
msgid "Switch to Inner layer 18"
msgstr "Byt till innerlager 18"
#: pcbnew/tools/pcb_actions.cpp:1058
msgid "Switch to Inner layer 19"
msgstr "Byt till innerlager 19"
#: pcbnew/tools/pcb_actions.cpp:1063
msgid "Switch to Inner layer 20"
msgstr "Byt till innerlager 20"
#: pcbnew/tools/pcb_actions.cpp:1068
msgid "Switch to Inner layer 21"
msgstr "Byt till innerlager 21"
#: pcbnew/tools/pcb_actions.cpp:1073
msgid "Switch to Inner layer 22"
msgstr "Byt till innerlager 22"
#: pcbnew/tools/pcb_actions.cpp:1078
msgid "Switch to Inner layer 23"
msgstr "Byt till innerlager 23"
#: pcbnew/tools/pcb_actions.cpp:1083
msgid "Switch to Inner layer 24"
msgstr "Byt till innerlager 24"
#: pcbnew/tools/pcb_actions.cpp:1088
msgid "Switch to Inner layer 25"
msgstr "Byt till innerlager 25"
#: pcbnew/tools/pcb_actions.cpp:1093
msgid "Switch to Inner layer 26"
msgstr "Byt till innerlager 26"
#: pcbnew/tools/pcb_actions.cpp:1098
msgid "Switch to Inner layer 27"
msgstr "Byt till innerlager 27"
#: pcbnew/tools/pcb_actions.cpp:1103
msgid "Switch to Inner layer 28"
msgstr "Byt till innerlager 28"
#: pcbnew/tools/pcb_actions.cpp:1108
msgid "Switch to Inner layer 29"
msgstr "Byt till innerlager 29"
#: pcbnew/tools/pcb_actions.cpp:1113
msgid "Switch to Inner layer 30"
msgstr "Byt till innerlager 30"
#: pcbnew/tools/pcb_actions.cpp:1119
msgid "Switch to Copper (B.Cu) layer"
msgstr "Byt till koppar (B.Cu) lager"
#: pcbnew/tools/pcb_actions.cpp:1125
msgid "Switch to Next Layer"
msgstr "Byt till nästa lager"
#: pcbnew/tools/pcb_actions.cpp:1131
msgid "Switch to Previous Layer"
msgstr "Byt till föregående lager"
#: pcbnew/tools/pcb_actions.cpp:1137
msgid "Toggle Layer"
msgstr "Växla lager"
#: pcbnew/tools/pcb_actions.cpp:1137
msgid "Switch between layers in active layer pair"
msgstr "Växla mellan lager i aktivt lagerpar"
#: pcbnew/tools/pcb_actions.cpp:1144
msgid "Increase Layer Opacity"
msgstr "Öka lagrets opacitet"
#: pcbnew/tools/pcb_actions.cpp:1144
msgid "Make the current layer less transparent"
msgstr "Minska det aktuella lagrets transparens"
#: pcbnew/tools/pcb_actions.cpp:1151
msgid "Decrease Layer Opacity"
msgstr "Minska skiktets opacitet"
#: pcbnew/tools/pcb_actions.cpp:1151
msgid "Make the current layer more transparent"
msgstr "Gör det aktuella lagret mer transparent"
#: pcbnew/tools/pcb_actions.cpp:1162
msgid "Show Board Statistics"
msgstr "Visa mönsterkortsstatistik"
#: pcbnew/tools/pcb_actions.cpp:1162
msgid "Shows board statistics"
msgstr "Visar mönsterkortsstatistik"
#: pcbnew/tools/pcb_actions.cpp:1166
msgid "Clearance Resolution..."
msgstr "Tar reda på isolationsavstånd..."
#: pcbnew/tools/pcb_actions.cpp:1167
msgid ""
"Show clearance resolution for the active layer between two selected objects"
msgstr "Visa upplösning för det aktiva lagret mellan två valda objekt"
#: pcbnew/tools/pcb_actions.cpp:1172
msgid "Constraints Resolution..."
msgstr "Begränsningar Upplösning ..."
#: pcbnew/tools/pcb_actions.cpp:1173
msgid "Show constraints resolution for the selected object"
msgstr "Visa begränsningar för det valda objektet"
#: pcbnew/tools/pcb_actions.cpp:1179
msgid "Geographical Reannotate..."
msgstr "Geografisk komponentnumrering..."
#: pcbnew/tools/pcb_actions.cpp:1179
msgid "Reannotate PCB in geographical order"
msgstr "Numrera om mönsterkortet i geografisk ordning"
#: pcbnew/tools/pcb_actions.cpp:1184
msgid "Repair Board"
msgstr "Reparera mönsterkort"
#: pcbnew/tools/pcb_actions.cpp:1185
msgid "Run various diagnostics and attempt to repair board"
msgstr "Kör olika diagnoser och försök att reparera kortet"
#: pcbnew/tools/pcb_actions.cpp:1190
msgid "Repair Footprint"
msgstr "Reparera fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:1191
msgid "Run various diagnostics and attempt to repair footprint"
msgstr "Kör olika diagnoser och försök reparera fotavtrycket"
#: pcbnew/tools/pcb_actions.cpp:1198
msgid "Align to Top"
msgstr "Justera till toppen"
#: pcbnew/tools/pcb_actions.cpp:1198
msgid "Aligns selected items to the top edge"
msgstr "Justerar valda objekt till överkanten"
#: pcbnew/tools/pcb_actions.cpp:1203
msgid "Align to Bottom"
msgstr "Rikta in mot botten"
#: pcbnew/tools/pcb_actions.cpp:1203
msgid "Aligns selected items to the bottom edge"
msgstr "Justerar valda objekt till den nedre kanten"
#: pcbnew/tools/pcb_actions.cpp:1208
msgid "Align to Left"
msgstr "Rikta in till vänster"
#: pcbnew/tools/pcb_actions.cpp:1208
msgid "Aligns selected items to the left edge"
msgstr "Justerar valda objekt till vänster kant"
#: pcbnew/tools/pcb_actions.cpp:1213
msgid "Align to Right"
msgstr "Justera till höger"
#: pcbnew/tools/pcb_actions.cpp:1213
msgid "Aligns selected items to the right edge"
msgstr "Justerar valda objekt till höger kant"
#: pcbnew/tools/pcb_actions.cpp:1218
msgid "Align to Vertical Center"
msgstr "Justera mot vertikalt centrum"
#: pcbnew/tools/pcb_actions.cpp:1218
msgid "Aligns selected items to the vertical center"
msgstr "Justerar markerade objekt vertikalt centrerat"
#: pcbnew/tools/pcb_actions.cpp:1223
msgid "Align to Horizontal Center"
msgstr "Placera objekt horisontellt centrerat"
#: pcbnew/tools/pcb_actions.cpp:1223
msgid "Aligns selected items to the horizontal center"
msgstr "Justerar valda objekt horisontellt centrerat"
#: pcbnew/tools/pcb_actions.cpp:1228
msgid "Distribute Horizontally"
msgstr "Distribuera horisontellt"
#: pcbnew/tools/pcb_actions.cpp:1228
msgid "Distributes selected items along the horizontal axis"
msgstr "Distribuerar valda objekt längs den horisontella axeln"
#: pcbnew/tools/pcb_actions.cpp:1233
msgid "Distribute Vertically"
msgstr "Distribuera vertikalt"
#: pcbnew/tools/pcb_actions.cpp:1233
msgid "Distributes selected items along the vertical axis"
msgstr "Distribuerar valda objekt längs den vertikala axeln"
#: pcbnew/tools/pcb_actions.cpp:1256
msgid "Keep arc center, adjust radius"
msgstr "Behåll bågens centrum, justera radien"
#: pcbnew/tools/pcb_actions.cpp:1257
msgid "Switch arc editing mode to keep center, adjust radius and endpoints"
msgstr ""
"Byt bågredigeringsläge till att behålla centrum och justera radie och "
"slutpunkter"
#: pcbnew/tools/pcb_actions.cpp:1262
msgid "Keep arc endpoints or direction of starting point"
msgstr "Behåll bågens slutpunkter eller riktning för startpunkt"
#: pcbnew/tools/pcb_actions.cpp:1263
msgid ""
"Switch arc editing mode to keep endpoints, or to keep direction of the other "
"point"
msgstr ""
"Byt bågredigeringsläge till att behålla slutpunkter eller behålla riktning "
"av den andra punkten"
#: pcbnew/tools/pcb_actions.cpp:1282
msgid "Position Relative To..."
msgstr "Position relativt ..."
#: pcbnew/tools/pcb_actions.cpp:1283
msgid "Positions the selected item(s) by an exact amount relative to another"
msgstr ""
"Positionerar markerade objekt med en exakt mängd i förhållande till en annan"
#: pcbnew/tools/pcb_actions.cpp:1320
msgid "Select/Expand Connection"
msgstr "Välj / Expandera anslutning"
#: pcbnew/tools/pcb_actions.cpp:1321
msgid ""
"Selects a connection or expands an existing selection to junctions, pads, or "
"entire connections"
msgstr ""
"Väljer en anslutning eller expanderar ett befintligt val till korsningar, "
"lödytor eller hela anslutningar"
#: pcbnew/tools/pcb_actions.cpp:1326
msgid "Unroute Selected"
msgstr "Ta bort vald ledningsdragning"
#: pcbnew/tools/pcb_actions.cpp:1327
msgid "Unroutes selected items to the nearest pad."
msgstr "Tar bort valda objekt till närmaste lödyta."
#: pcbnew/tools/pcb_actions.cpp:1338
msgid "Select All Tracks in Net"
msgstr "Välj alla ledare i nätet"
#: pcbnew/tools/pcb_actions.cpp:1339
msgid "Selects all tracks & vias belonging to the same net."
msgstr "Väljer alla ledare och vior som tillhör samma nät."
#: pcbnew/tools/pcb_actions.cpp:1343
msgid "Deselect All Tracks in Net"
msgstr "Avmarkera alla ledare i nätet"
#: pcbnew/tools/pcb_actions.cpp:1344
msgid "Deselects all tracks & vias belonging to the same net."
msgstr "Tar bort alla ledare och vior som tillhör samma nät från val."
#: pcbnew/tools/pcb_actions.cpp:1349
msgid "Select All Unconnected Footprints"
msgstr "Välj alla icke anslutna fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:1350
msgid "Selects all unconnected footprints belonging to each selected net."
msgstr "Väljer alla icke anslutna fotavtryck som hör till varje valt nät."
#: pcbnew/tools/pcb_actions.cpp:1355
msgid "Grab Nearest Unconnected Footprints"
msgstr "Ta tag i närmaste icke anslutna fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:1356
msgid ""
"Selects and initiates moving the nearest unconnected footprint on each "
"selected net."
msgstr ""
"Väljer och startar flyttning av närmaste oanslutna fotavtryck i varje valt "
"nät."
#: pcbnew/tools/pcb_actions.cpp:1361
msgid "Selects all footprints and tracks in the schematic sheet"
msgstr "Väljer alla fotavtryck och ledare i kretsschema-arket"
#: pcbnew/tools/pcb_actions.cpp:1366
msgid "Items in Same Hierarchical Sheet"
msgstr "Objekt i samma hierarkiska ark"
#: pcbnew/tools/pcb_actions.cpp:1367
msgid "Selects all footprints and tracks in the same schematic sheet"
msgstr "Väljer alla fotavtryck och ledare i samma kretsschema-ark"
#: pcbnew/tools/pcb_actions.cpp:1372
msgid "Select on Schematic"
msgstr "Välj i kretsschemat"
#: pcbnew/tools/pcb_actions.cpp:1373
msgid "Selects corresponding items in Schematic editor"
msgstr "Väljer motsvarande objekt i kretsschemaredigeraren"
#: pcbnew/tools/pcb_actions.cpp:1378
msgid "Filter Selected Items..."
msgstr "Filtrera valda objekt..."
#: pcbnew/tools/pcb_actions.cpp:1378
msgid "Remove items from the selection by type"
msgstr "Avmarkera objekt efter typ"
#: pcbnew/tools/pcb_actions.cpp:1386
msgid "Draft Fill Selected Zone(s)"
msgstr "Preliminär fyllning av vald(a) kopparzon(er)"
#: pcbnew/tools/pcb_actions.cpp:1387
msgid ""
"Update copper fill of selected zone(s) without regard to other interacting "
"zones"
msgstr ""
"Uppdatera valda zoners kopparfyllning utan att ta hänsyn till andra zoner"
#: pcbnew/tools/pcb_actions.cpp:1393 pcbnew/tools/zone_filler_tool.cpp:159
msgid "Fill All Zones"
msgstr "Fyll i alla zoner"
#: pcbnew/tools/pcb_actions.cpp:1393
msgid "Update copper fill of all zones"
msgstr "Uppdatera alla zoners kopparfyllning"
#: pcbnew/tools/pcb_actions.cpp:1401
msgid "Unfill Selected Zone(s)"
msgstr "Ta bort fyllning från valda zon(er)"
#: pcbnew/tools/pcb_actions.cpp:1401
msgid "Remove copper fill from selected zone(s)"
msgstr "Ta bort kopparfyllning från valda zoner"
#: pcbnew/tools/pcb_actions.cpp:1407 pcbnew/tools/zone_filler_tool.cpp:386
msgid "Unfill All Zones"
msgstr "Avsluta alla zoner"
#: pcbnew/tools/pcb_actions.cpp:1407
msgid "Remove copper fill from all zones"
msgstr "Ta bort kopparfyllning från alla zoner"
#: pcbnew/tools/pcb_actions.cpp:1415
msgid "Place Selected Footprints"
msgstr "Placera valda fotavtryck"
#: pcbnew/tools/pcb_actions.cpp:1416
msgid "Performs automatic placement of selected components"
msgstr "Utför automatisk placering av valda komponenter"
#: pcbnew/tools/pcb_actions.cpp:1420
msgid "Place Off-Board Footprints"
msgstr "Placera fotavtryck utanför mönsterkortet"
#: pcbnew/tools/pcb_actions.cpp:1421
msgid "Performs automatic placement of components outside board area"
msgstr "Utför automatisk placering av komponenter utanför kartongområdet"
#: pcbnew/tools/pcb_actions.cpp:1429
msgid "Route Single Track"
msgstr "Dra enkel ledare"
#: pcbnew/tools/pcb_actions.cpp:1429
msgid "Route tracks"
msgstr "Dra ledare"
#: pcbnew/tools/pcb_actions.cpp:1436
msgid "Route Differential Pair"
msgstr "Dra differentiellt par"
#: pcbnew/tools/pcb_actions.cpp:1436
msgid "Route differential pairs"
msgstr "Dra differentialpar"
#: pcbnew/tools/pcb_actions.cpp:1442
msgid "Interactive Router Settings..."
msgstr "Inställningar för interaktiv router..."
#: pcbnew/tools/pcb_actions.cpp:1442
msgid "Open Interactive Router settings"
msgstr "Öppna Interactive Router-inställningar"
#: pcbnew/tools/pcb_actions.cpp:1447
msgid "Differential Pair Dimensions..."
msgstr "Mått för differentiellt par..."
#: pcbnew/tools/pcb_actions.cpp:1447
msgid "Open Differential Pair Dimension settings"
msgstr "Öppna måttinställningarna för differentiellt par"
#: pcbnew/tools/pcb_actions.cpp:1452
msgid "Router Highlight Mode"
msgstr "Routerläge framhäv kollisioner"
#: pcbnew/tools/pcb_actions.cpp:1452
msgid "Switch router to highlight mode"
msgstr "Ställ om ledardragning till läge som framhäver kollisioner"
#: pcbnew/tools/pcb_actions.cpp:1457
msgid "Router Shove Mode"
msgstr "Routerläge knuffa"
#: pcbnew/tools/pcb_actions.cpp:1457
msgid "Switch router to shove mode"
msgstr "Ställ om ledardragning till läge som knuffar andra objekt ur vägen"
#: pcbnew/tools/pcb_actions.cpp:1462
msgid "Router Walkaround Mode"
msgstr "Routerläge gå runt"
#: pcbnew/tools/pcb_actions.cpp:1462
msgid "Switch router to walkaround mode"
msgstr "Ställ om ledardragning till läge som går runt hinder"
#: pcbnew/tools/pcb_actions.cpp:1467
msgid "Cycle Router Mode"
msgstr "Byt ledardragningsläge"
#: pcbnew/tools/pcb_actions.cpp:1467
msgid "Cycle router to the next mode"
msgstr "Byt till nästa ledardragningsläge"
#: pcbnew/tools/pcb_actions.cpp:1472
msgid "Set Layer Pair..."
msgstr "Ställ in lagerpar ..."
#: pcbnew/tools/pcb_actions.cpp:1472
msgid "Change active layer pair for routing"
msgstr "Ändra aktivt lagerpar för routing"
#: pcbnew/tools/pcb_actions.cpp:1479
msgid "Tune length of a single track"
msgstr "Anpassa längden för en enskild ledare"
#: pcbnew/tools/pcb_actions.cpp:1486
msgid "Tune length of a differential pair"
msgstr "Ställ in längden på ett differentialpar"
#: pcbnew/tools/pcb_actions.cpp:1493
msgid "Tune skew of a differential pair"
msgstr "Ställ in skevhet för ett differentiellt par"
#: pcbnew/tools/pcb_actions.cpp:1502
msgid "Walks the current track back one segment."
msgstr "Går tillbaka ett segment längs den aktuella ledaren."
#: pcbnew/tools/pcb_actions.cpp:1507
msgid "Route From Other End"
msgstr "Dra ledare från andra ändan"
#: pcbnew/tools/pcb_actions.cpp:1508
msgid ""
"Commits current segments and starts next segment from nearest ratsnest end."
msgstr ""
"Placerar nuvarande segment och startar nästa segment från närmaste "
"nätlinjeända."
#: pcbnew/tools/pcb_actions.cpp:1513
msgid "Attempt Finish"
msgstr "Försök avsluta"
#: pcbnew/tools/pcb_actions.cpp:1514
msgid "Attempts to complete current route to nearest ratsnest end."
msgstr ""
"Försöker göra klart nuvarande ledardragning till närmaste nätlinjeända."
#: pcbnew/tools/pcb_actions.cpp:1519
msgid "Route Selected"
msgstr "Ledning vald"
#: pcbnew/tools/pcb_actions.cpp:1520
msgid "Sequentially route selected items from ratsnest anchor."
msgstr "Dra ledare för valda objekt sekventiellt från nätlinjeankare."
#: pcbnew/tools/pcb_actions.cpp:1526
msgid "Route Selected From Other End"
msgstr "Dra vald ledare från andra ändan"
#: pcbnew/tools/pcb_actions.cpp:1527
msgid "Sequentially route selected items from other end of ratsnest anchor."
msgstr ""
"Dra ledare för valda objekt sekventiellt från andra änden av nätlinjeankare."
#: pcbnew/tools/pcb_actions.cpp:1533
msgid "Attempt Finish Selected (Autoroute)"
msgstr "Försök färdigställa valda (Autoroute)"
#: pcbnew/tools/pcb_actions.cpp:1534
msgid "Sequentially attempt to automatically route all selected pads."
msgstr "Försök att sekventiellt dra ledningar för alla valda lödytor."
#: pcbnew/tools/pcb_actions.cpp:1540
msgid ""
"Splits the track segment into two segments connected at the cursor position."
msgstr ""
"Delar upp ledarsegmentet i två segment som är anslutna vid markörpositionen."
#: pcbnew/tools/pcb_actions.cpp:1564
msgid "Length Tuning Settings..."
msgstr "Inställningar för längdinställning ..."
#: pcbnew/tools/pcb_actions.cpp:1565
msgid "Sets the length tuning parameters for currently routed item."
msgstr "Ställer in längdinställningsparametrar för aktuellt kopplat objekt."
#: pcbnew/tools/pcb_control.cpp:224
msgid "Don't show again"
msgstr "Visa inte igen"
#: pcbnew/tools/pcb_control.cpp:238
#, c-format
msgid ""
"Not all zones are filled. Use Edit > Fill All Zones (%s) if you wish to see "
"all fills."
msgstr ""
"Alla zoner är inte fyllda. Använd Redigera > Fyll i alla zoner (%s) om du "
"vill se alla fyllda zoner."
#: pcbnew/tools/pcb_control.cpp:578
msgid "Item locked."
msgstr "Objekt låst."
#: pcbnew/tools/pcb_control.cpp:799
msgid ""
"Warning: some pasted items were on layers which are not present in the "
"current board.\n"
"These items could not be pasted.\n"
msgstr ""
"Varning: vissa inklistrade objekt var på lager som inte existerar i det "
"aktuella mönsterkortet.\n"
"Dessa objekt kunde inte klistras in.\n"
#: pcbnew/tools/pcb_control.cpp:984
msgid "Invalid clipboard contents"
msgstr "Ogiltigt urklippsinnehåll"
#: pcbnew/tools/pcb_control.cpp:1272
#, c-format
msgid ""
"Error loading board.\n"
"%s"
msgstr ""
"Fel vid inläsning av kort.\n"
"%s"
#: pcbnew/tools/pcb_control.cpp:1363
msgid "Footprint Name"
msgstr "Fotavtrycksnamn"
#: pcbnew/tools/pcb_control.cpp:1413
msgid "Resolved clearance"
msgstr "Löst avstånd"
#: pcbnew/tools/pcb_control.cpp:1418
msgid "Actual clearance"
msgstr "Faktisk frigång"
#: pcbnew/tools/pcb_control.cpp:1461
msgid "Resolved hole clearance"
msgstr "Löst frigång för hål"
#: pcbnew/tools/pcb_control.cpp:1466
msgid "Actual hole clearance"
msgstr "Faktisk frigång för hål"
#: pcbnew/tools/pcb_control.cpp:1499
msgid "Resolved edge clearance"
msgstr "Löst frigång till mönsterkortets kant"
#: pcbnew/tools/pcb_control.cpp:1504
msgid "Resolved margin clearance"
msgstr "Löst frigång till marginal"
#: pcbnew/tools/pcb_control.cpp:1515
msgid "Selected Items"
msgstr "Valda objekt"
#: pcbnew/tools/pcb_point_editor.cpp:633
msgid "Drag a corner"
msgstr "Dra ett hörn"
#: pcbnew/tools/pcb_point_editor.cpp:2288
msgid "Add a zone corner"
msgstr "Lägg till ett zonhörn"
#: pcbnew/tools/pcb_point_editor.cpp:2325
msgid "Split segment"
msgstr "Delat segment"
#: pcbnew/tools/pcb_point_editor.cpp:2396
msgid "Remove a zone/polygon corner"
msgstr "Ta bort ett hörn för zon / polygon"
#: pcbnew/tools/pcb_selection_tool.cpp:78
msgid "Select"
msgstr "Markera"
#: pcbnew/tools/pcb_selection_tool.cpp:1166
msgid "Select/Expand Connection..."
msgstr "Välj / Expandera anslutning..."
#: pcbnew/tools/placement_tool.cpp:64
msgid "Align/Distribute"
msgstr "Justera / fördela"
#: pcbnew/tools/placement_tool.cpp:234
msgid "Align to top"
msgstr "Rikta in överst"
#: pcbnew/tools/placement_tool.cpp:279
msgid "Align to bottom"
msgstr "Rikta in mot botten"
#: pcbnew/tools/placement_tool.cpp:339
msgid "Align to left"
msgstr "Rikta in till vänster"
#: pcbnew/tools/placement_tool.cpp:399
msgid "Align to right"
msgstr "Rikta in åt höger"
#: pcbnew/tools/placement_tool.cpp:444
msgid "Align to middle"
msgstr "Rikta in i mitten"
#: pcbnew/tools/placement_tool.cpp:489
msgid "Align to center"
msgstr "Rikta in i mitten"
#: pcbnew/tools/placement_tool.cpp:554
msgid "Distribute horizontally"
msgstr "Fördela horisontellt"
#: pcbnew/tools/placement_tool.cpp:681
msgid "Distribute vertically"
msgstr "Distribuera vertikalt"
#: pcbnew/tools/position_relative_tool.cpp:153
msgid "Position Relative"
msgstr "Position Relativ"
#: pcbnew/tools/position_relative_tool.cpp:174
msgid "Click on reference item..."
msgstr "Klicka på referensobjektet ..."
#: pcbnew/tools/zone_create_helper.cpp:213
msgid "Add a zone cutout"
msgstr "Lägg till en zonutklippning"
#: pcbnew/tools/zone_create_helper.cpp:246
msgid "Add a zone"
msgstr "Lägg till en zon"
#: pcbnew/tools/zone_create_helper.cpp:279
msgid "Add a graphical polygon"
msgstr "Lägg till en grafisk polygon"
#: pcbnew/tools/zone_filler_tool.cpp:86
msgid "Checking Zones"
msgstr "Kontrollerar zoner"
#: pcbnew/tools/zone_filler_tool.cpp:92 pcbnew/tools/zone_filler_tool.cpp:167
#: pcbnew/tools/zone_filler_tool.cpp:330
msgid "Fill Zone(s)"
msgstr "Fyll zon (er)"
#: pcbnew/tools/zone_filler_tool.cpp:136 pcbnew/tools/zone_filler_tool.cpp:221
msgid "Show DRC rules"
msgstr "Visa DRC-regler"
#: pcbnew/tools/zone_filler_tool.cpp:143 pcbnew/tools/zone_filler_tool.cpp:228
msgid "Rules"
msgstr "Regler"
#: pcbnew/tools/zone_filler_tool.cpp:149 pcbnew/tools/zone_filler_tool.cpp:234
msgid "Zone fills may be inaccurate. DRC rules contain errors."
msgstr "Zonfyllningar kan vara felaktiga. DRC-regler innehåller fel."
#: pcbnew/tools/zone_filler_tool.cpp:245
#, c-format
msgid "Refill %d Zones"
msgstr "Gör om fyllning av %d zoner"
#: pcbnew/tools/zone_filler_tool.cpp:254
msgid "Auto-fill Zone(s)"
msgstr "Autofyll zon(er)"
#: pcbnew/tools/zone_filler_tool.cpp:265
#: pcbnew/widgets/appearance_controls.cpp:3231
msgid "Open Preferences"
msgstr "Öppna inställningar"
#: pcbnew/tools/zone_filler_tool.cpp:277
msgid ""
"Automatic refill of zones can be turned off in Preferences if it becomes too "
"slow."
msgstr ""
"Automatisk återfyllning av zoner kan stängas av i Inställningar om det blir "
"för långsamt."
#: pcbnew/tools/zone_filler_tool.cpp:324
msgid "Fill Zone"
msgstr "Fyll zon"
#: pcbnew/tools/zone_filler_tool.cpp:367
msgid "Unfill Zone"
msgstr "Töm Zonfyllning"
#: pcbnew/tracks_cleaner.cpp:68
msgid "Checking null tracks and vias..."
msgstr "Kontrollerar noll-ledare och -vior..."
#: pcbnew/tracks_cleaner.cpp:70
msgid "Removing null tracks and vias..."
msgstr "Tar bort noll-ledare och -vior..."
#: pcbnew/tracks_cleaner.cpp:81
msgid "Checking redundant tracks..."
msgstr "Kontrollerar överflödiga ledare..."
#: pcbnew/tracks_cleaner.cpp:83
msgid "Removing redundant tracks..."
msgstr "Tar bort överflödiga ledare..."
#: pcbnew/tracks_cleaner.cpp:95
msgid "Checking shorting tracks..."
msgstr "Kontrollerar kortslutande ledare..."
#: pcbnew/tracks_cleaner.cpp:97
msgid "Removing shorting tracks..."
msgstr "Ta bort ledare som kortsluter två nät..."
#: pcbnew/tracks_cleaner.cpp:110
msgid "Checking tracks in pads..."
msgstr "Kontrollerar ledare i lödytor..."
#: pcbnew/tracks_cleaner.cpp:112
msgid "Removing tracks in pads..."
msgstr "Tar bort ledare i lödytor..."
#: pcbnew/tracks_cleaner.cpp:126
msgid "Checking dangling tracks and vias..."
msgstr "Kontrollerar frihängande ledare och vior..."
#: pcbnew/tracks_cleaner.cpp:131
msgid "Removing dangling tracks..."
msgstr "Tar bort frihängande ledare..."
#: pcbnew/tracks_cleaner.cpp:134
msgid "Removing dangling vias..."
msgstr "Tar bort frihängande vior..."
#: pcbnew/tracks_cleaner.cpp:148
msgid "Checking collinear tracks..."
msgstr "Kontrollerar kolinjära ledare..."
#: pcbnew/tracks_cleaner.cpp:150
msgid "Merging collinear tracks..."
msgstr "Slår samman kolinjära ledare..."
#: pcbnew/undo_redo.cpp:547
msgid "Incomplete undo/redo operation: some items not found"
msgstr "Ofullständig ångra / göra om: vissa objekt hittades inte"
#: pcbnew/widgets/appearance_controls.cpp:332
msgid "Show tracks"
msgstr "Visa ledare"
#: pcbnew/widgets/appearance_controls.cpp:333
msgid "Show all vias"
msgstr "Visa alla vior"
#: pcbnew/widgets/appearance_controls.cpp:334
msgid "Show all pads"
msgstr "Visa alla lödytor"
#: pcbnew/widgets/appearance_controls.cpp:335
msgid "Show copper zones"
msgstr "Visa kopparzoner"
#: pcbnew/widgets/appearance_controls.cpp:336
msgid "Images"
msgstr "Bilder"
#: pcbnew/widgets/appearance_controls.cpp:336
msgid "Show user images"
msgstr "Visa användarens bilder"
#: pcbnew/widgets/appearance_controls.cpp:338
msgid "Footprints Front"
msgstr "Framsidans fotavtryck"
#: pcbnew/widgets/appearance_controls.cpp:338
msgid "Show footprints that are on board's front"
msgstr "Visa fotavtryck som finns på mönsterkorets framsida"
#: pcbnew/widgets/appearance_controls.cpp:339
msgid "Footprints Back"
msgstr "Fotavtryck baksida"
#: pcbnew/widgets/appearance_controls.cpp:339
msgid "Show footprints that are on board's back"
msgstr "Visa fotavtryck på mönsterkortets baksida"
#: pcbnew/widgets/appearance_controls.cpp:340
msgid "Through-hole Pads"
msgstr "Hålmonterings-lödytor"
#: pcbnew/widgets/appearance_controls.cpp:340
msgid "Show through-hole pads"
msgstr "Visa hålmonterings-lödytor"
#: pcbnew/widgets/appearance_controls.cpp:341
msgid "Show footprint values"
msgstr "Visa värden för fotavtryck"
#: pcbnew/widgets/appearance_controls.cpp:342
msgid "References"
msgstr "Referens"
#: pcbnew/widgets/appearance_controls.cpp:342
msgid "Show footprint references"
msgstr "Visa referenser för fotavtryck"
#: pcbnew/widgets/appearance_controls.cpp:343
msgid "Footprint Text"
msgstr "Fotavtryckstext"
#: pcbnew/widgets/appearance_controls.cpp:343
msgid "Show all footprint text"
msgstr "Visa all fotavtryckstext"
#: pcbnew/widgets/appearance_controls.cpp:344
msgid "Hidden Text"
msgstr "Dold text"
#: pcbnew/widgets/appearance_controls.cpp:344
msgid "Show footprint text marked as invisible"
msgstr "Visa textavtryck markerat som osynligt"
#: pcbnew/widgets/appearance_controls.cpp:347
msgid "Show unconnected nets as a ratsnest"
msgstr "Visa icke anslutna nät som nätlinjer"
#: pcbnew/widgets/appearance_controls.cpp:348
msgid "DRC Warnings"
msgstr "DRC-varningar"
#: pcbnew/widgets/appearance_controls.cpp:348
msgid "DRC violations with a Warning severity"
msgstr "DRC-överträdelser med en allvarlighetsvarning"
#: pcbnew/widgets/appearance_controls.cpp:349
msgid "DRC Errors"
msgstr "DRC-fel"
#: pcbnew/widgets/appearance_controls.cpp:349
msgid "DRC violations with an Error severity"
msgstr "DRC-kränkningar med allvarlighetsgrad"
#: pcbnew/widgets/appearance_controls.cpp:350
msgid "DRC Exclusions"
msgstr "DRC-undantag"
#: pcbnew/widgets/appearance_controls.cpp:350
msgid "DRC violations which have been individually excluded"
msgstr "DRC-kränkningar som har uteslutits individuellt"
#: pcbnew/widgets/appearance_controls.cpp:351
msgid "Show footprint and text origins as a cross"
msgstr "Visa origo (ankare) för fotavtryck och text som ett kors"
#: pcbnew/widgets/appearance_controls.cpp:352
msgid "Locked Item Shadow"
msgstr "Låsta objekts skuggning"
#: pcbnew/widgets/appearance_controls.cpp:352
msgid "Show a shadow marker on locked items"
msgstr "Visa en skuggad markör på låsta objekt"
#: pcbnew/widgets/appearance_controls.cpp:353
msgid "Show drawing sheet borders and title block"
msgstr "Visa ritningsarkets ram och namnruta"
#: pcbnew/widgets/appearance_controls.cpp:375
msgid "No Layers"
msgstr "Inga lager"
#: pcbnew/widgets/appearance_controls.cpp:377
#: pcbnew/widgets/appearance_controls_base.cpp:165
msgid "All Layers"
msgstr "Alla lager"
#: pcbnew/widgets/appearance_controls.cpp:379
msgid "All Copper Layers"
msgstr "Alla kopparlager"
#: pcbnew/widgets/appearance_controls.cpp:382
msgid "Inner Copper Layers"
msgstr "Inre kopparlager"
#: pcbnew/widgets/appearance_controls.cpp:385
msgid "Front Layers"
msgstr "Främre lager"
#: pcbnew/widgets/appearance_controls.cpp:388
msgid "Front Assembly View"
msgstr "Främre monteringsvy"
#: pcbnew/widgets/appearance_controls.cpp:391
msgid "Back Layers"
msgstr "Bakre lager"
#: pcbnew/widgets/appearance_controls.cpp:394
msgid "Back Assembly View"
msgstr "Bakre monteringsvy"
#: pcbnew/widgets/appearance_controls.cpp:436
#, c-format
msgid ""
"Save and restore layer visibility combinations.\n"
"Use %s+Tab to activate selector.\n"
"Successive Tabs while holding %s down will cycle through presets in the "
"popup."
msgstr ""
"Spara och hämta kombinationer för lagers synlighet.\n"
"Använd %s+Tab för att aktivera väljare.\n"
"Följande tryck på Tab medan %s hålls ner stegar genom förinställningarna i "
"popupmenyn."
#: pcbnew/widgets/appearance_controls.cpp:443
#, c-format
msgid ""
"Save and restore view location and zoom.\n"
"Use %s+Tab to activate selector.\n"
"Successive Tabs while holding %s down will cycle through viewports in the "
"popup."
msgstr ""
"Spara och hämta visningens position och zoom.\n"
"Använd %s+Tab för att aktivera väljare.\n"
"Följande tryck på Tab medan %s hålls ner stegar genom visningsytor i "
"popupmenyn."
#: pcbnew/widgets/appearance_controls.cpp:458
msgid "Filter nets"
msgstr "Filtrera nät"
#: pcbnew/widgets/appearance_controls.cpp:609
#: pcbnew/widgets/appearance_controls.cpp:1744
msgid "Layer Display Options"
msgstr "Alternativ för lagervisning"
#: pcbnew/widgets/appearance_controls.cpp:621
#: pcbnew/widgets/appearance_controls.cpp:1750
#, c-format
msgid "Inactive layers (%s):"
msgstr "Inaktiva lager (%s):"
#: pcbnew/widgets/appearance_controls.cpp:623
#: pcbnew/widgets/appearance_controls.cpp:1752
msgid "Inactive layers:"
msgstr "Inaktiva lager:"
#: pcbnew/widgets/appearance_controls.cpp:637
#: pcbnew/widgets/appearance_controls.cpp:1757
msgid "Inactive layers will be shown in full color"
msgstr "Inaktiva lager kommer visas i fullfärg"
#: pcbnew/widgets/appearance_controls.cpp:642
#: pcbnew/widgets/appearance_controls.cpp:1759
msgid "Dim"
msgstr "Dämpa"
#: pcbnew/widgets/appearance_controls.cpp:644
#: pcbnew/widgets/appearance_controls.cpp:1760
msgid "Inactive layers will be dimmed"
msgstr "Inaktiva lager dämpas"
#: pcbnew/widgets/appearance_controls.cpp:649
#: pcbnew/widgets/appearance_controls.cpp:1762
msgid "Hide"
msgstr "Dölj"
#: pcbnew/widgets/appearance_controls.cpp:651
#: pcbnew/widgets/appearance_controls.cpp:1763
msgid "Inactive layers will be hidden"
msgstr "Inaktiva lager kommer gömmas"
#: pcbnew/widgets/appearance_controls.cpp:662
#: pcbnew/widgets/appearance_controls.cpp:1765
msgid "Flip board view"
msgstr "Spegelvänd visningen av mönsterkortet"
#: pcbnew/widgets/appearance_controls.cpp:684
#: pcbnew/widgets/appearance_controls.cpp:2424
msgid "Net Display Options"
msgstr "Alternativ för nätvisning"
#: pcbnew/widgets/appearance_controls.cpp:696
#: pcbnew/widgets/appearance_controls.cpp:2429
#, c-format
msgid "Net colors (%s):"
msgstr "Nätfärger (%s):"
#: pcbnew/widgets/appearance_controls.cpp:698
#: pcbnew/widgets/appearance_controls.cpp:2431
msgid "Net colors:"
msgstr "Nätfärger:"
#: pcbnew/widgets/appearance_controls.cpp:703
#: pcbnew/widgets/appearance_controls.cpp:2434
msgid "Choose when to show net and netclass colors"
msgstr "Välj när du vill visa nät- och nätklassfärger"
#: pcbnew/widgets/appearance_controls.cpp:712
#: pcbnew/widgets/appearance_controls.cpp:2437
msgid "Net and netclass colors are shown on all copper items"
msgstr "Nät- och nätklassfärger visas på alla kopparobjekt"
#: pcbnew/widgets/appearance_controls.cpp:720
#: pcbnew/widgets/appearance_controls.cpp:2440
msgid "Net and netclass colors are shown on the ratsnest only"
msgstr "Nät- och nätklassfärger visas endast på nätlinjer"
#: pcbnew/widgets/appearance_controls.cpp:727
#: pcbnew/widgets/appearance_controls.cpp:2443
msgid "Net and netclass colors are not shown"
msgstr "Nät- och nätklassfärger visas inte"
#: pcbnew/widgets/appearance_controls.cpp:738
#: pcbnew/widgets/appearance_controls.cpp:2448
#, c-format
msgid "Ratsnest display (%s):"
msgstr "Nätlinjevisning (%s):"
#: pcbnew/widgets/appearance_controls.cpp:740
#: pcbnew/widgets/appearance_controls.cpp:2450
msgid "Ratsnest display:"
msgstr "Nätlinjevisning:"
#: pcbnew/widgets/appearance_controls.cpp:745
#: pcbnew/widgets/appearance_controls.cpp:2453
msgid "Choose which ratsnest lines to display"
msgstr "Välj vilka nätlinjer som ska visas"
#: pcbnew/widgets/appearance_controls.cpp:755
#: pcbnew/widgets/appearance_controls.cpp:2456
msgid "Show ratsnest lines to items on all layers"
msgstr "Visa nätlinjer för objekt på alla lager"
#: pcbnew/widgets/appearance_controls.cpp:760
#: pcbnew/widgets/appearance_controls.cpp:2458
msgid "Visible layers"
msgstr "Synliga lager"
#: pcbnew/widgets/appearance_controls.cpp:762
#: pcbnew/widgets/appearance_controls.cpp:2459
msgid "Show ratsnest lines to items on visible layers"
msgstr "Visa nätlinjer för objekt på synliga lager"
#: pcbnew/widgets/appearance_controls.cpp:769
#: pcbnew/widgets/appearance_controls.cpp:2462
msgid "Hide all ratsnest lines"
msgstr "Dölj alla nätlinjer"
#: pcbnew/widgets/appearance_controls.cpp:908
msgid "Set Net Color"
msgstr "Ställ in nätfärg"
#: pcbnew/widgets/appearance_controls.cpp:911
#, c-format
msgid "Highlight %s"
msgstr "Markera %s"
#: pcbnew/widgets/appearance_controls.cpp:914
#: pcbnew/widgets/appearance_controls.cpp:2290
#, c-format
msgid "Select Tracks and Vias in %s"
msgstr "Välj ledare och vior i %s"
#: pcbnew/widgets/appearance_controls.cpp:917
#: pcbnew/widgets/appearance_controls.cpp:2293
#, c-format
msgid "Unselect Tracks and Vias in %s"
msgstr "Ta bort ledare och vior i %s från val"
#: pcbnew/widgets/appearance_controls.cpp:922
msgid "Show All Nets"
msgstr "Visa alla nät"
#: pcbnew/widgets/appearance_controls.cpp:924
msgid "Hide All Other Nets"
msgstr "Dölj alla andra nät"
#: pcbnew/widgets/appearance_controls.cpp:956
#, c-format
msgid "Click to hide ratsnest for %s"
msgstr "Klicka för att dölja nätlinjer för %s"
#: pcbnew/widgets/appearance_controls.cpp:957
#, c-format
msgid "Click to show ratsnest for %s"
msgstr "Klicka för att visa nätlinjer för %s"
#: pcbnew/widgets/appearance_controls.cpp:966
msgid ""
"Double click (or middle click) to change color; right click for more actions"
msgstr ""
"Dubbelklicka eller mittklicka för att ändra färg; högerklicka för fler "
"åtgärder"
#: pcbnew/widgets/appearance_controls.cpp:1005
#: pcbnew/widgets/appearance_controls_base.cpp:45
msgid "Objects"
msgstr "Föremål"
#: pcbnew/widgets/appearance_controls.cpp:1530
msgid "Double click or middle click for color change, right click for menu"
msgstr "Dubbelklicka eller mittklicka för att ändra färg, högerklicka för meny"
#: pcbnew/widgets/appearance_controls.cpp:1537
msgid "Show or hide this layer"
msgstr "Visa eller dölj detta lager"
#: pcbnew/widgets/appearance_controls.cpp:1610
msgid "Adhesive on board's front"
msgstr "Lim på mönsterkortets framsida"
#: pcbnew/widgets/appearance_controls.cpp:1611
msgid "Adhesive on board's back"
msgstr "Lim på mönsterkortets baksida"
#: pcbnew/widgets/appearance_controls.cpp:1612
msgid "Solder paste on board's front"
msgstr "Lodpasta på mönsterkortets framsida"
#: pcbnew/widgets/appearance_controls.cpp:1613
msgid "Solder paste on board's back"
msgstr "Lodpasta på mönsterkortets baksida"
#: pcbnew/widgets/appearance_controls.cpp:1614
msgid "Silkscreen on board's front"
msgstr "Anvisningstryck på mönsterkortets framsida"
#: pcbnew/widgets/appearance_controls.cpp:1615
msgid "Silkscreen on board's back"
msgstr "Anvisningstryck på mönsterkortets baksida"
#: pcbnew/widgets/appearance_controls.cpp:1616
msgid "Solder mask on board's front"
msgstr "Lödmask på mönsterkortets framsida"
#: pcbnew/widgets/appearance_controls.cpp:1617
msgid "Solder mask on board's back"
msgstr "Lödmask på mönsterkortets baksida"
#: pcbnew/widgets/appearance_controls.cpp:1618
msgid "Explanatory drawings"
msgstr "Förklarande ritningar"
#: pcbnew/widgets/appearance_controls.cpp:1619
msgid "Explanatory comments"
msgstr "Förklarande kommentarer"
#: pcbnew/widgets/appearance_controls.cpp:1620
#: pcbnew/widgets/appearance_controls.cpp:1621
msgid "User defined meaning"
msgstr "Användardefinierad betydelse"
#: pcbnew/widgets/appearance_controls.cpp:1622
msgid "Board's perimeter definition"
msgstr "Kortets omkretsdefinition"
#: pcbnew/widgets/appearance_controls.cpp:1623
msgid "Board's edge setback outline"
msgstr "Mönsterkortets kantmarginals kontur"
#: pcbnew/widgets/appearance_controls.cpp:1624
msgid "Footprint courtyards on board's front"
msgstr "Fotavtrycks gårdsplaner på mönsterkortets framsida"
#: pcbnew/widgets/appearance_controls.cpp:1625
msgid "Footprint courtyards on board's back"
msgstr "Fotavtrycks gårdsplaner på mönsterkortets baksida"
#: pcbnew/widgets/appearance_controls.cpp:1626
msgid "Footprint assembly on board's front"
msgstr "Montering av fotavtryck på mönsterkortets framsida"
#: pcbnew/widgets/appearance_controls.cpp:1627
msgid "Footprint assembly on board's back"
msgstr "Montering av fotavtryck på mönsterkortets baksida"
#: pcbnew/widgets/appearance_controls.cpp:1628
msgid "User defined layer 1"
msgstr "Användardefinierat lager 1"
#: pcbnew/widgets/appearance_controls.cpp:1629
msgid "User defined layer 2"
msgstr "Användardefinierat lager 2"
#: pcbnew/widgets/appearance_controls.cpp:1630
msgid "User defined layer 3"
msgstr "Användardefinierat lager 3"
#: pcbnew/widgets/appearance_controls.cpp:1631
msgid "User defined layer 4"
msgstr "Användardefinierat lager 4"
#: pcbnew/widgets/appearance_controls.cpp:1632
msgid "User defined layer 5"
msgstr "Användardefinierat lager 5"
#: pcbnew/widgets/appearance_controls.cpp:1633
msgid "User defined layer 6"
msgstr "Användardefinierat lager 6"
#: pcbnew/widgets/appearance_controls.cpp:1634
msgid "User defined layer 7"
msgstr "Användardefinierat lager 7"
#: pcbnew/widgets/appearance_controls.cpp:1635
msgid "User defined layer 8"
msgstr "Användardefinierat lager 8"
#: pcbnew/widgets/appearance_controls.cpp:1636
msgid "User defined layer 9"
msgstr "Användardefinierat lager 9"
#: pcbnew/widgets/appearance_controls.cpp:1684
msgid "Front copper layer"
msgstr "Främre kopparskikt"
#: pcbnew/widgets/appearance_controls.cpp:1685
msgid "Back copper layer"
msgstr "Bakre kopparskikt"
#: pcbnew/widgets/appearance_controls.cpp:1686
msgid "Inner copper layer"
msgstr "Inre kopparskikt"
#: pcbnew/widgets/appearance_controls.cpp:1774
msgid "Show All Copper Layers"
msgstr "Visa alla kopparlager"
#: pcbnew/widgets/appearance_controls.cpp:1776
msgid "Hide All Copper Layers"
msgstr "Dölj alla kopparlager"
#: pcbnew/widgets/appearance_controls.cpp:1786
msgid "Show All Non Copper Layers"
msgstr "Visa alla icke-koppar lager"
#: pcbnew/widgets/appearance_controls.cpp:1789
msgid "Hide All Non Copper Layers"
msgstr "Dölj alla icke-koppar lager"
#: pcbnew/widgets/appearance_controls.cpp:1802
msgid "Show Only Front Assembly Layers"
msgstr "Visa endast framsidans monteringslager"
#: pcbnew/widgets/appearance_controls.cpp:1805
msgid "Show Only Front Layers"
msgstr "Visa endast framsidans lager"
#: pcbnew/widgets/appearance_controls.cpp:1811
msgid "Show Only Inner Layers"
msgstr "Visa endast inre lager"
#: pcbnew/widgets/appearance_controls.cpp:1815
msgid "Show Only Back Layers"
msgstr "Visa endast baksidans lager"
#: pcbnew/widgets/appearance_controls.cpp:1818
msgid "Show Only Back Assembly Layers"
msgstr "Visa endast baksidans monteringslager"
#: pcbnew/widgets/appearance_controls.cpp:2127
#, c-format
msgid "Show or hide %s"
msgstr "Visa eller dölj %s"
#: pcbnew/widgets/appearance_controls.cpp:2168
#, c-format
msgid "Set opacity of %s"
msgstr "Ställ in opacitet på %s"
#: pcbnew/widgets/appearance_controls.cpp:2280
msgid "Set Netclass Color"
msgstr "Ställ in nätklassfärg"
#: pcbnew/widgets/appearance_controls.cpp:2287
#, c-format
msgid "Highlight Nets in %s"
msgstr "Markera nät i %s"
#: pcbnew/widgets/appearance_controls.cpp:2298
msgid "Show All Netclasses"
msgstr "Visa alla nätklasser"
#: pcbnew/widgets/appearance_controls.cpp:2300
msgid "Hide All Other Netclasses"
msgstr "Dölj alla andra nätklasser"
#: pcbnew/widgets/appearance_controls.cpp:2362
#, c-format
msgid "Show or hide ratsnest for nets in %s"
msgstr "Visa eller dölj nätlinjer för nät i %s"
#: pcbnew/widgets/appearance_controls.cpp:2473
#, c-format
msgid "Presets (%s+Tab):"
msgstr "Förinställningar (%s+Tab):"
#: pcbnew/widgets/appearance_controls.cpp:2495
msgid "Save preset..."
msgstr "Spara förinställning ..."
#: pcbnew/widgets/appearance_controls.cpp:2496
msgid "Delete preset..."
msgstr "Ta bort förinställning ..."
#: pcbnew/widgets/appearance_controls.cpp:2599
msgid "Layer preset name:"
msgstr "Lagrets förinställda namn:"
#: pcbnew/widgets/appearance_controls.cpp:2599
msgid "Save Layer Preset"
msgstr "Spara lagringsförinställning"
#: pcbnew/widgets/appearance_controls.cpp:2643
msgid "Presets"
msgstr "Förinställningar"
#: pcbnew/widgets/appearance_controls.cpp:2655
msgid "Delete Preset"
msgstr "Ta bort förinställning"
#: pcbnew/widgets/appearance_controls.cpp:2656
msgid "Select preset:"
msgstr "Välj förinställning:"
#: pcbnew/widgets/appearance_controls.cpp:3245
msgid ""
"The current color theme is read-only. Create a new theme in Preferences to "
"enable color editing."
msgstr ""
"Nuvarande färgtema är skrivskyddat. Skapa ett nytt tema i Inställningar för "
"att möjliggöra färgredigering."
#: pcbnew/widgets/appearance_controls_base.cpp:71
msgid "Show the Net Inspector"
msgstr "Visa nätinspektören"
#: pcbnew/widgets/appearance_controls_base.cpp:123
msgid "Configure net classes"
msgstr "Konfigurera nätklasser"
#: pcbnew/widgets/appearance_controls_base.cpp:161
msgid "Presets (Ctrl+Tab):"
msgstr "Förinställningar (Ctrl + Tab):"
#: pcbnew/widgets/appearance_controls_base.cpp:165
#: pcbnew/widgets/appearance_controls_base.cpp:184
msgid "(unsaved)"
msgstr "(ej sparad)"
#: pcbnew/widgets/appearance_controls_base.cpp:180
msgid "Viewports (Alt+Tab):"
msgstr "Visningsytor (Alt + Tab):"
#: pcbnew/widgets/filedlg_hook_save_project.h:32
#: pcbnew/widgets/legacyfiledlg_save_project.h:34
msgid "Create a new project for this board"
msgstr "Skapa ett nytt projekt för detta mönsterkort"
#: pcbnew/widgets/legacyfiledlg_netlist_options.h:35
msgid "Omit extra information"
msgstr "Utelämna extra information"
#: pcbnew/widgets/legacyfiledlg_netlist_options.h:36
msgid "Omit nets"
msgstr "Utelämna nät"
#: pcbnew/widgets/legacyfiledlg_netlist_options.h:38
msgid "Do not prefix path with footprint UUID."
msgstr "Prefigera inte sökvägen med fotavtryckets UUID."
#: pcbnew/widgets/legacyfiledlg_save_project.h:36
msgid ""
"Creating a project will enable features such as design rules, net classes, "
"and layer presets"
msgstr ""
"Genom att skapa ett projekt kommer funktioner som designregler, nätklasser "
"och lagerförinställningar att aktiveras"
#: pcbnew/widgets/panel_selection_filter.cpp:146
#, c-format
msgid "Only %s"
msgstr "Endast %s"
#: pcbnew/widgets/panel_selection_filter.cpp:184
#: pcbnew/widgets/panel_selection_filter_base.cpp:23
msgid "Locked items"
msgstr "Låsta objekt"
#: pcbnew/widgets/panel_selection_filter.cpp:185
#: pcbnew/widgets/panel_selection_filter_base.cpp:25
msgid "Allow selection of locked items"
msgstr "Tillåt val av låsta objekt"
#: pcbnew/widgets/panel_selection_filter.cpp:193
#: pcbnew/widgets/panel_selection_filter_base.cpp:57
msgid "Rule Areas"
msgstr "Regelområde"
#: pcbnew/widgets/panel_selection_filter.cpp:194
#: pcbnew/widgets/panel_selection_filter_base.cpp:61
msgid "Dimensions"
msgstr "Måttsättning"
#: pcbnew/widgets/panel_selection_filter.cpp:195
#: pcbnew/widgets/panel_selection_filter_base.cpp:65
msgid "Other items"
msgstr "Andra saker"
#: pcbnew/widgets/pcb_properties_panel.cpp:162
msgid "Change property"
msgstr "Ändra egenskap"
#: pcbnew/widgets/search_handlers.cpp:239
msgid "Textbox"
msgstr "Textruta"
#: pcbnew/widgets/search_handlers.cpp:317
msgid "No Net"
msgstr "Inget nät"
#: pcbnew/zone.cpp:525
msgid "Cutout"
msgstr "Klipp ut"
#: pcbnew/zone.cpp:534
msgid "No vias"
msgstr "Inga vior"
#: pcbnew/zone.cpp:537
msgid "No tracks"
msgstr "Inga ledare"
#: pcbnew/zone.cpp:540
msgid "No pads"
msgstr "Inga lödytor"
#: pcbnew/zone.cpp:543
msgid "No copper zones"
msgstr "Inga kopparzoner"
#: pcbnew/zone.cpp:546
msgid "No footprints"
msgstr "Inga fotavtryck"
#: pcbnew/zone.cpp:549
msgid "Restrictions"
msgstr "Begränsningar"
#: pcbnew/zone.cpp:562 pcbnew/zone.cpp:1427
msgid "Priority"
msgstr "Prioritet"
#: pcbnew/zone.cpp:584 pcbnew/zone.cpp:791
#, c-format
msgid "%s and %d more"
msgstr "%s och %d till"
#: pcbnew/zone.cpp:598 pcbnew/zone.cpp:1437
msgid "Fill Mode"
msgstr "Ifyllnadsläge"
#: pcbnew/zone.cpp:600
msgid "Filled Area"
msgstr "Fyllt område"
#: pcbnew/zone.cpp:621
msgid "Corner Count"
msgstr "Hörnräkning"
#: pcbnew/zone.cpp:656
msgid "Rule Area"
msgstr "Regelområde"
#: pcbnew/zone.cpp:658
msgid "Teardrop Area"
msgstr "Kragförstärkningsyta"
#: pcbnew/zone.cpp:660
msgid "Copper Zone"
msgstr "Kopparzon"
#: pcbnew/zone.cpp:662
msgid "Non-copper Zone"
msgstr "Icke-kopparzon"
#: pcbnew/zone.cpp:797
#, c-format
msgid "Rule Area Cutout on %s"
msgstr "Urtag i regelyta på %s"
#: pcbnew/zone.cpp:799
#, c-format
msgid "Zone Cutout on %s"
msgstr "Zone Cutout på %s"
#: pcbnew/zone.cpp:804
#, c-format
msgid "Rule Area on %s"
msgstr "Regelområde den %s"
#: pcbnew/zone.cpp:806
#, c-format
msgid "Zone %s on %s"
msgstr "Zon %s på %s"
#: pcbnew/zone.cpp:1471
msgid "Minimum Width"
msgstr "Minsta bredd"
#: pcbnew/zone.cpp:1476
msgid "Pad Connections"
msgstr "Lödyteanslutningar"
#: pcbnew/zone_filler.cpp:109
msgid "Checking zone fills..."
msgstr "Kontrollerar zonfyllningar ..."
#: pcbnew/zone_filler.cpp:110
msgid "Building zone fills..."
msgstr "Byggzon fyller ..."
#: pcbnew/zone_filler.cpp:447
msgid "Removing isolated copper islands..."
msgstr "Ta bort isolerade kopparöar ..."
#: pcbnew/zone_filler.cpp:570
msgid "Zone fills are out-of-date. Refill?"
msgstr "Zonfyllningar är inaktuella. Fyll på nytt?"
#: pcbnew/zone_filler.cpp:572
msgid "Refill"
msgstr "Gör om fyllning"
#: pcbnew/zone_filler.cpp:572
msgid "Continue without Refill"
msgstr "Fortsätt utan att fylla om"
#: pcbnew/zones.h:64
msgid "inherited"
msgstr "ärvt"
#: pcbnew/zones.h:66
msgid "thermal reliefs"
msgstr "termiska avlastningar"
#: pcbnew/zones.h:67
msgid "solid"
msgstr "heltäckande"
#: pcbnew/zones.h:68
msgid "thermal reliefs for PTH"
msgstr "Termiska avlastningar för genompläterade hål (PTH)"
#: plugins/3d/vrml/vrml.cpp:228
msgid "[INFO] load failed: input line too long\n"
msgstr "[INFO] belastning misslyckades: inmatningsraden för lång\n"
#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:10
msgid "KiCad Image Converter"
msgstr "KiCad bildkonverterare"
#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:11
msgid "Bitmap to Component Converter"
msgstr "Bitmapp till Komponent-konverterare"
#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:12
msgid "Create a component from a bitmap for use with KiCad"
msgstr "Skapa en komponent från en bitmap-bild för användning med KiCad"
#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:13
msgid "bitmap2component"
msgstr "bitmap2component"
#: resources/linux/launchers/org.kicad.eeschema.desktop.in:11
msgid "KiCad Schematic Editor (Standalone)"
msgstr "KiCad kretsschemaredigerare (fristående)"
#: resources/linux/launchers/org.kicad.eeschema.desktop.in:12
msgid "Schematic Capture Tool"
msgstr "Kretsschemaredigerare"
#: resources/linux/launchers/org.kicad.eeschema.desktop.in:13
msgid "Standalone schematic editor for KiCad schematics"
msgstr "Fristående kretsschemaredigerare för KiCad kretsscheman"
#: resources/linux/launchers/org.kicad.eeschema.desktop.in:14
msgid "eeschema"
msgstr "eeschema"
#: resources/linux/launchers/org.kicad.gerbview.desktop.in:12
msgid "Gerber File Viewer"
msgstr "Gerberfil-visare"
#: resources/linux/launchers/org.kicad.gerbview.desktop.in:13
msgid "View Gerber files"
msgstr "Visa Gerberfiler"
#: resources/linux/launchers/org.kicad.gerbview.desktop.in:14
msgid "gerbview"
msgstr "gerbview"
#: resources/linux/launchers/org.kicad.kicad.desktop.in:11
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:6
msgid "KiCad"
msgstr "KiCad"
#: resources/linux/launchers/org.kicad.kicad.desktop.in:12
msgid "EDA Suite"
msgstr "EDA-svit"
#: resources/linux/launchers/org.kicad.kicad.desktop.in:13
msgid "Suite of tools for schematic design and circuit board layout"
msgstr "Svit av verktyg för schema- och kretskortsdesign"
#: resources/linux/launchers/org.kicad.pcbcalculator.desktop.in:10
msgid "KiCad PCB Calculator"
msgstr "KiCad Beräkningsverktyg"
#: resources/linux/launchers/org.kicad.pcbcalculator.desktop.in:11
msgid "PCB Calculator"
msgstr "KiCad Beräkningsverktyg"
#: resources/linux/launchers/org.kicad.pcbcalculator.desktop.in:12
msgid "Calculator for various electronics-related computations"
msgstr "Kalkylator för elektronikrelaterade beräkningar"
#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:11
msgid "KiCad PCB Editor (Standalone)"
msgstr "KiCad mönsterkortsredigerare (fristående)"
#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:12
msgid "PCB layout editor"
msgstr "Mönsterkortsredigerare"
#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:13
msgid "Standalone circuit board editor for KiCad boards"
msgstr "Fristående mönsterkortsredigerare för KiCad-mönsterkort"
#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:14
msgid "pcbnew"
msgstr "pcbnew"
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:13
msgid "An EDA suite for schematic and circuit board design"
msgstr "En EDA-svit för schema- och kretskortsdesign"
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:34
msgid "EDA"
msgstr "EDA"
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:37
msgid "Circuit board"
msgstr "Mönsterkort"
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:51
msgid ""
"KiCad is a free and open-source electronics design automation (EDA) suite. "
"It features schematic capture, integrated circuit simulation, printed "
"circuit board (PCB) layout, 3D rendering, and plotting/data export to "
"numerous formats. KiCad also includes a high-quality component library "
"featuring thousands of symbols, footprints, and 3D models. KiCad has minimal "
"system requirements and runs on Linux, Windows, and macOS."
msgstr ""
"KiCad är en gratis och open-source EDA-svit (Electronic Design Automation), "
"och tillhandahåller verktyg för utformning av kretsscheman, simulering av "
"integrerade kretsar, mönsterkortslayout, 3D rendering och utskrift/"
"dataexport i ett flertal format. KiCad innehåller också ett högkvalitativt "
"komponentbibliotek med tusentals symboler, fotavtryck och 3D-modeller. KiCad "
"har minimala systemkrav och kan köras på Linux, Windows och maxOS."
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:58
msgid "KiCad Main Window"
msgstr "KiCads huvudfönster"
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:68
msgid "KiCad PCB Layout Editor"
msgstr "KiCad mönsterkortsredigerare"
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:85
msgid "The KiCad Developers"
msgstr "KiCads utvecklare"
#: resources/linux/mime/kicad-gerbers.xml.in:5
msgid "Gerber file"
msgstr "Gerberfil"
#: resources/linux/mime/kicad-gerbers.xml.in:27
msgid "Excellon drill file"
msgstr "Exfellon-borrfil"
#: resources/linux/mime/kicad-kicad.xml.in:5
msgid "KiCad Project"
msgstr "KiCad projekt"
#: resources/linux/mime/kicad-kicad.xml.in:12
msgid "KiCad Schematic"
msgstr "KiCad schema"
#: resources/linux/mime/kicad-kicad.xml.in:27
msgid "KiCad Printed Circuit Board"
msgstr "KiCad-mönsterkort"
#~ msgid "Pin Text"
#~ msgstr "Fäst text"
#, fuzzy, c-format
#~ msgid "%s not found."
#~ msgstr "%s hittades inte"
#, c-format
#~ msgid "Could not find Spice item with reference '%s'"
#~ msgstr "Kunde inte hitta SPICE-objekt med referens '%s'"
#~ msgid "Break Wire"
#~ msgstr "Bryt tråd"
#~ msgid "Divide a wire into segments which can be dragged independently"
#~ msgstr "Dela en tråd i segment som kan dras oberoende"
#~ msgid "Divide a bus into segments which can be dragged independently"
#~ msgstr "Dela en buss i segment som kan dras oberoende"
#~ msgid " X "
#~ msgstr " X "
#~ msgid "Break Bus"
#~ msgstr "Bryt buss"
#~ msgid ""
#~ "Cannot make path relative (target volume different from file volume)!"
#~ msgstr ""
#~ "Det går inte att göra sökväg relativ (målvolym skiljer sig från filvolym)!"
#~ msgid "Change Edit Method"
#~ msgstr "Ändra Redigeringsmetod"
#~ msgid "Change edit method constraints"
#~ msgstr "Ändra begränsningar för redigeringsmetod"
#~ msgid "Number of points:"
#~ msgstr "Antal poäng:"
#~ msgid "Adjust passive symbol values (e.g. M -> Meg; 100 nF -> 100n)"
#~ msgstr "Justera passiva symbolvärden (t.ex. M -> Meg; 100 nF -> 100n)"
#~ msgid "Simulation settings"
#~ msgstr "Simuleringsinställningar"
#~ msgid "cycles"
#~ msgstr "cykler"
#~ msgid "Sim Parameters"
#~ msgstr "Simuleringsparametrar"
#~ msgid "Save as Image"
#~ msgstr "Spara som bild"
#~ msgid "Save as .csv File"
#~ msgstr "Spara som .csv-fil"
#~ msgid "Add a power port"
#~ msgstr "Lägg till en strömport"
#~ msgid "Bom output format, valid options: xml"
#~ msgstr "Komponentlistans utmatningsformat; giltigt alternativ: xml"
#~ msgid "Invalid Bezier curve created"
#~ msgstr "Ogiltig Bezier-kurva skapad"
#~ msgid "Open schematic in Eeschema"
#~ msgstr "Öppet schema i Eeschema"
#~ msgid "Min Width"
#~ msgstr "Min bredd"
#~ msgid "Viewports (Shift+Tab):"
#~ msgstr "Visningsytor (Shift+Tab):"
#~ msgid "Bitmap size:"
#~ msgstr "Storlek på bitmappen:"
#~ msgid "Output Parameters"
#~ msgstr "Utgångsparametrar"
#~ msgid "Load Bitmap"
#~ msgstr "Ladda bitmapp"
#~ msgid "Image Options"
#~ msgstr "Bildalternativ"
#~ msgid "Conflicting items shadow"
#~ msgstr "Motstridiga skuggor för objekt"
#~ msgid "Multiple objects selected"
#~ msgstr "Flera objekt valda"
#~ msgid ""
#~ "# 1 - Full documentation\n"
#~ "\n"
#~ "The Eeschema documentation (*eeschema.html*) describes this intermediate "
#~ "netlist and gives examples(chapter ***creating customized netlists and "
#~ "bom files***).\n"
#~ "\n"
#~ "# 2 - The intermediate Netlist File\n"
#~ "\n"
#~ "BOM files (and netlist files) can be created from an *Intermediate "
#~ "netlist file* created by Eeschema.\n"
#~ "\n"
#~ "This file uses XML syntax and is called the intermediate netlist. The "
#~ "intermediate netlist includes a large amount of data about your board and "
#~ "because of this, it can be used with post-processing to create a BOM or "
#~ "other reports.\n"
#~ "\n"
#~ "Depending on the output (BOM or netlist), different subsets of the "
#~ "complete Intermediate Netlist file will be used in the post-processing.\n"
#~ "\n"
#~ "# 3 - Conversion to a new format\n"
#~ "\n"
#~ "By applying a post-processing filter to the Intermediate netlist file you "
#~ "can generate foreign netlist files as well as BOM files. Because this "
#~ "conversion is a text to text transformation, this post-processing filter "
#~ "can be written using *Python*, *XSLT*, or any other tool capable of "
#~ "taking XML as input.\n"
#~ "\n"
#~ "XSLT itself is a XML language suitable for XML transformations. There is "
#~ "a free program called `xsltproc` that you can download and install. The "
#~ "`xsltproc` program can be used to read the Intermediate XML netlist input "
#~ "file, apply a style-sheet to transform the input, and save the results in "
#~ "an output file. Use of `xsltproc` requires a style-sheet file using XSLT "
#~ "conventions. The full conversion process is handled by Eeschema, after it "
#~ "is configured once to run `xsltproc` in a specific way.\n"
#~ "\n"
#~ "A Python script is somewhat more easy to create.\n"
#~ "\n"
#~ "# 4 - Initialization of the dialog window\n"
#~ "\n"
#~ "You should add a new plugin (a script) in the plugin list by clicking on "
#~ "the Add Plugin button.\n"
#~ "\n"
#~ "## 4.1 - Plugin Configuration Parameters\n"
#~ "\n"
#~ "The Eeschema plug-in configuration dialog requires the following "
#~ "information:\n"
#~ "\n"
#~ " * The title: for instance, the name of the netlist format.\n"
#~ " * The command line to launch the converter (usually a script).\n"
#~ "\n"
#~ "***Note (Windows only):***\n"
#~ "*By default, the command line runs with hidden console window and output "
#~ "is redirected to \"Plugin info\" field. To show the window of the running "
#~ "command, set the checkbox \"Show console window\".*\n"
#~ "\n"
#~ "Once you click on the generate button the following will happen:\n"
#~ "\n"
#~ "1. Eeschema creates an intermediate netlist file \\*.xml, for instance "
#~ "`test.xml`.\n"
#~ "2. Eeschema runs the script from the command line to create the final "
#~ "output file.\n"
#~ "\n"
#~ "## 4.2 - Generate netlist files with the command line\n"
#~ "\n"
#~ "Assuming we are using the program `xsltproc.exe` to apply the sheet style "
#~ "to the intermediate file, `xsltproc.exe` is executed with the following "
#~ "command.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc.exe -o <output filename> <style-sheet filename> <input XML file "
#~ "to convert>\n"
#~ "```\n"
#~ "\n"
#~ "On Windows the command line is the following.\n"
#~ "\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O\" f:/kicad/bin/plugins/myconverter.xsl "
#~ "\"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "On Linux the command becomes as following.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc -o \"%O\" /usr/local/kicad/bin/plugins/myconverter .xsl \"%I\"\n"
#~ "```\n"
#~ "where `myconverter.xsl` is the style-sheet that you are applying.\n"
#~ "\n"
#~ "Do not forget the double quotes around the file names, this allows them "
#~ "to have spaces after the substitution by Eeschema.\n"
#~ "\n"
#~ "If a Python script is used, the command line is something like (depending "
#~ "on the Python script):\n"
#~ "\n"
#~ "```\n"
#~ "python f:/kicad/bin/plugins/bom-in-python/myconverter.py \"%I\" \"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "or\n"
#~ "\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/myconverter .xsl \"%I\" "
#~ "\"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "The command line format accepts parameters for filenames. The supported "
#~ "formatting parameters are:\n"
#~ "\n"
#~ " * `%B`: base filename of selected output file, minus path and "
#~ "extension.\n"
#~ " * `%P`: project directory, without name and without trailing '/'.\n"
#~ " * `%I`: complete filename and path of the temporary input file\n"
#~ "(the intermediate net file).\n"
#~ " * `%O`: complete filename and path (but without extension) of the user\n"
#~ "chosen output file.\n"
#~ "\n"
#~ "`%I` will be replaced by the actual intermediate file name (usually the "
#~ "full root sheet filename with extension \".xml\").\n"
#~ "`%O` will be replaced by the actual output file name (the full root sheet "
#~ "filename minus extension).\n"
#~ "`%B` will be replaced by the actual output short file name (the short "
#~ "root sheet filename minus extension).\n"
#~ "`%P` will be replaced by the actual current project path.\n"
#~ "\n"
#~ "## 4.3 - Command line format:\n"
#~ "\n"
#~ "### 4.3.1 - Remark:\n"
#~ "\n"
#~ "Most of time, the created file must have an extension, depending on its "
#~ "type.\n"
#~ "Therefore you have to add to the option ***%O*** the right file "
#~ "extension.\n"
#~ "\n"
#~ "For instance:\n"
#~ "\n"
#~ " * **%O.csv** to create a .csv file (comma separated value file).\n"
#~ " * **%O.htm** to create a .html file.\n"
#~ " * **%O.bom** to create a .bom file.\n"
#~ "\n"
#~ "### 4.3.2 Example for xsltproc:\n"
#~ "\n"
#~ "The command line format for xsltproc is the following:\n"
#~ "\n"
#~ "```\n"
#~ "<path of xsltproc> xsltproc <xsltproc parameters>\n"
#~ "```\n"
#~ "\n"
#~ "On Windows:\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O.bom\" f:/kicad/bin/plugins/"
#~ "netlist_form_pads-pcb.xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "On Linux:\n"
#~ "```\n"
#~ "xsltproc -o \"%O.bom\" /usr/local/kicad/bin/plugins/netlist_form_pads-pcb."
#~ "xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "The above examples assume `xsltproc` is installed on your PC under "
#~ "Windows and xsl files located in `<path_to_kicad>/kicad/bin/plugins/`.\n"
#~ "\n"
#~ "\n"
#~ "### 4.3.3 Example for Python scripts:\n"
#~ "\n"
#~ "Assuming python is installed on your PC, and python scripts are located "
#~ "in\n"
#~ "\n"
#~ " `<path_to_kicad>/kicad/bin/plugins/bom-in-python/`,\n"
#~ "\n"
#~ "the command line format for python is something like:\n"
#~ "\n"
#~ "```\n"
#~ "python <script file name> <input filename> <output filename>\n"
#~ "```\n"
#~ "\n"
#~ "On Windows:\n"
#~ "```\n"
#~ "python.exe f:/kicad/bin/plugins/bom-in-python/my_python_script.py \"%I\" "
#~ "\"%O.html\"\n"
#~ "```\n"
#~ "\n"
#~ "On Linux:\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py "
#~ "\"%I\" \"%O.csv\"\n"
#~ "```\n"
#~ msgstr ""
#~ "# 1 - Fullständig dokumentation\n"
#~ "\n"
#~ "Eeschema-dokumentationen (*eeschema.html*) beskriver denna mellanliggande "
#~ "nätlista och ger exempel (kapitel ***skapa anpassade nätlistor och "
#~ "materiallistefiler (BOM)***).\n"
#~ "\n"
#~ "# 2 - Den mellanliggande nätlistefilen\n"
#~ "\n"
#~ "Materiallistefiler (och nätlistefiler) kan skapas från en *mellanliggande "
#~ "nätlistefil* skapad av Eeschema.\n"
#~ "\n"
#~ "Den här filen använder XML-syntax och kallas den mellanliggande "
#~ "nätlistan. Den mellanliggande nätlistan innehåller en stor mängd data om "
#~ "ditt mönsterkort och på grund av detta kan den med efterbehandling "
#~ "användas för att skapa en materiallista eller andra rapporter.\n"
#~ "\n"
#~ "Beroende på utdata (materiallista eller nätlista) kommer olika delmängder "
#~ "av den fullständiga mellanliggande nätlistefilen att användas i "
#~ "efterbehandlingen.\n"
#~ "\n"
#~ "# 3 - Konvertering till ett nytt format\n"
#~ "\n"
#~ "Genom att tillämpa ett efterbehandlingsfilter på den mellanliggande "
#~ "nätlistefilen kan du skapa främmande nätlistefiler såväl som "
#~ "materiallistefiler. Eftersom denna konvertering är en text till text-"
#~ "omvandling, kan detta efterbehandlingsfilter skrivas med *Python*, *XSLT* "
#~ "eller något annat verktyg som kan ta XML som inmatning.\n"
#~ "\n"
#~ "XSLT är i sig ett XML-språk som är lämpligt för XML-omvandlingar. Det "
#~ "finns ett gratis program som heter 'xsltproc' som du kan ladda ner och "
#~ "installera. Programmet `xsltproc` kan användas för att läsa in den "
#~ "mellanliggande XML-nätlistefilen, tillämpa ett översättningsschema "
#~ "('style-sheet') för att omvandla indatat och spara resultaten i en "
#~ "utdatafil. Användning av 'xsltproc' kräver en fil med översättningsschema "
#~ "innehållande XSLT-konventioner. Hela konverteringsprocessen hanteras av "
#~ "Eeschema, efter att den har konfigurerats en gång för att köra 'xsltproc' "
#~ "på ett specifikt sätt.\n"
#~ "\n"
#~ "Ett Python-skript är något lättare att skapa.\n"
#~ "\n"
#~ "# 4 - Initialisering av dialogfönstret\n"
#~ "\n"
#~ "Du bör lägga till en ny insticksmodul (ett skript) i insticksmodulslistan "
#~ "genom att klicka på knappen Lägg till insticksprogram.\n"
#~ "\n"
#~ "## 4.1 - Parametrar för konfiguration av insticksprogram\n"
#~ "\n"
#~ "Konfigurationsdialogrutan för Eeschema-insticksprogram kräver följande "
#~ "information:\n"
#~ "\n"
#~ " * Titeln: till exempel namnet på nätlisteformatet.\n"
#~ " * Kommandoraden för att starta omvandlaren (vanligtvis ett skript).\n"
#~ "\n"
#~ "***Obs (endast Windows):***\n"
#~ "*Som standard körs kommandoraden i ett dolt kommandoradsfönster och "
#~ "utdata omdirigeras till fältet \"Insticksmodulsinfo\". För att visa "
#~ "fönstret för det körande kommandot, markera kryssrutan \"Visa "
#~ "kommandoradsfönster\".*\n"
#~ "\n"
#~ "När du klickar på generera-knappen händer följande:\n"
#~ "\n"
#~ "1. Eeschema skapar en mellanliggande nätlistefil \\*. xml, till exempel "
#~ "`test.xml`.\n"
#~ "2. Eeschema kör skriptet från kommandoraden för att skapa den slutliga "
#~ "utdatafilen.\n"
#~ "\n"
#~ "## 4.2 - Skapa nätlistefiler med kommandoraden\n"
#~ "\n"
#~ "Förutsatt att vi använder programmet 'xsltproc.exe' för att tillämpa "
#~ "översättningsschemat på mellanfilen, körs 'xsltproc.exe' med följande "
#~ "kommando.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc.exe -o <filnamn för utdata> <filnamn för översättningsschema> "
#~ "<mellanliggande XML-fil som ska konverteras>\n"
#~ "```\n"
#~ "\n"
#~ "På Windows är kommandoraden följande.\n"
#~ "\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O\" f:/kicad/bin/plugins/myconverter.xsl "
#~ "\"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "På Linux blir kommandot följande.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc -o \"%O\" /usr/local/kicad/bin/plugins/myconverter.xsl \"%I\"\n"
#~ "```\n"
#~ "där `myconverter.xsl` är översättningsschemat du använder.\n"
#~ "\n"
#~ "Glöm inte de dubbla citaten runt filnamnen, det gör att de kan innehålla "
#~ "mellanslag efter substitutionen som Eeschema utför.\n"
#~ "\n"
#~ "Om ett Python-skript används är kommandoraden i stil med (beroende på "
#~ "Python-skriptet):\n"
#~ "\n"
#~ "```\n"
#~ "python f:/kicad/bin/plugins/bom-in-python/myconverter.py \"%I\" \"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "eller\n"
#~ "\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/myconverter.xsl \"%I\" "
#~ "\"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "Kommandoradsformatet accepterar parametrar för filnamn. "
#~ "Formateringsparametrarna som stöds är:\n"
#~ "\n"
#~ " * `%B`: basfilnamn för vald utdatafil, minus sökväg och tillägg.\n"
#~ " * `%P`: projektkatalog, utan namn och utan efterföljande '/'.\n"
#~ " * `%I`: fullständigt filnamn och sökväg till den tillfälliga "
#~ "inmatningsfilen\n"
#~ "(den mellanliggande nätlistefilen).\n"
#~ " * `%O`: fullständiga filnamn och sökväg (men utan tillägg) till "
#~ "utdatafilen\n"
#~ "användaren valt.\n"
#~ "\n"
#~ "`%I` kommer att ersättas med det faktiska mellanliggande filnamnet "
#~ "(vanligtvis hela rotarkets filnamn med tillägget \".xml\").\n"
#~ "`%O` kommer att ersättas med det faktiska utdatafilnamnet (hela rotarkets "
#~ "filnamn minus förlängning).\n"
#~ "`% B` kommer att ersättas med det verkliga korta filnamnet (rotarkets "
#~ "korta filnamn minus tillägget).\n"
#~ "`% P` kommer att ersättas med det aktuella projektets sökväg.\n"
#~ "\n"
#~ "## 4.3 - Kommandoradsformat:\n"
#~ "\n"
#~ "### 4.3.1 - Anmärkning:\n"
#~ "\n"
#~ "För det mesta måste den skapade filen ha ett tillägg, beroende på dess "
#~ "typ.\n"
#~ "Därför måste du lägga till rätt filändelse till alternativet ***%O ***.\n"
#~ "\n"
#~ "Till exempel:\n"
#~ "\n"
#~ " * **%O.csv ** för att skapa en .csv-fil (kommaseparerad värdefil).\n"
#~ " * **%O.htm ** för att skapa en .html-fil.\n"
#~ " * **%O.bom ** för att skapa en .bom-fil.\n"
#~ "\n"
#~ "### 4.3.2 Exempel för xsltproc:\n"
#~ "\n"
#~ "Kommandoradsformatet för xsltproc är följande:\n"
#~ "\n"
#~ "```\n"
#~ "<sökväg för xsltproc> xsltproc <xsltproc-parametrar>\n"
#~ "```\n"
#~ "\n"
#~ "På Windows:\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O.bom\" f:/kicad/bin/plugins/"
#~ "netlist_form_pads-pcb.xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "På Linux:\n"
#~ "```\n"
#~ "xsltproc -o \"%O.bom\" /usr/local/kicad/bin/plugins/netlist_form_pads-pcb."
#~ "xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "Ovanstående exempel förutsätter att 'xsltproc' är installerad på din "
#~ "dator under Windows och xsl-filer som finns i '<path_to_kicad>/kicad/bin/"
#~ "plugins/`.\n"
#~ "\n"
#~ "\n"
#~ "### 4.3.3 Exempel för Python-skript:\n"
#~ "\n"
#~ "Förutsatt att python är installerat på din dator och att python-skript "
#~ "finns i\n"
#~ "\n"
#~ " `<path_to_kicad>/kicad/bin/plugins/bom-in-python/`,\n"
#~ "\n"
#~ "är kommandoradsformatet för python i stil med:\n"
#~ "\n"
#~ "```\n"
#~ "python <skriptfilnamn> <inmatningsfilnamn> <utdatafilnamn>\n"
#~ "```\n"
#~ "\n"
#~ "På Windows:\n"
#~ "```\n"
#~ "python.exe f:/kicad/bin/plugins/bom-in-python/my_python_script.py \"%I\" "
#~ "\"%O.html\"\n"
#~ "```\n"
#~ "\n"
#~ "På Linux:\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py "
#~ "\"%I\" \"%O.csv\"\n"
#~ "```\n"
#, c-format
#~ msgid "Failed reading model library '%s'."
#~ msgstr "Det gick inte att läsa modellbibliotek '%s'."
#~ msgid "Source"
#~ msgstr "Källa"
#~ msgid "Instance"
#~ msgstr "Instans"
#~ msgid "Library:"
#~ msgstr "Bibliotek:"
#~ msgid "Store in Reference and Value"
#~ msgstr "Spara i referensbeteckning och värde"
#~ msgid "Alias of"
#~ msgstr "Alias för"
#~ msgid ""
#~ "Multiple symbols have the same reference designator.\n"
#~ "Annotation must be corrected before simulating."
#~ msgstr ""
#~ "Flertalet symboler har samma referensbeteckning.\n"
#~ "Annoteringen måste korrigeras innan simulering."
#, c-format
#~ msgid "%s describes %lu pins, expected %u"
#~ msgstr "%s beskriver %lu stift, förväntas %u"
#, c-format
#~ msgid "Invalid symbol pin index: '%s'"
#~ msgstr "Ogiltigt symbolstifts index '%s'"
#~ msgid "10A Log"
#~ msgstr "10A log"
#~ msgid "15A Log"
#~ msgstr "15A log"
#~ msgid "15A Log S"
#~ msgstr "15A Log S"
#~ msgid "10C Rev Log"
#~ msgstr "10C omvänd Log"
#~ msgid "15C Rev Log"
#~ msgstr "15C omvänd Log"
#~ msgid "15C Rev Log S"
#~ msgstr "15C omvänd Log S"
#~ msgid "0B Lin"
#~ msgstr "0B Linjär"
#~ msgid "4B S-Curve"
#~ msgstr "4B S-Kurva"
#~ msgid "5B S-Curve"
#~ msgstr "5B S-Kurva"
#~ msgid "Switch"
#~ msgstr "Strömbrytare"
#~ msgid "Characteristic Curve"
#~ msgstr "Karaktäristisk kurva"
#~ msgid "Gerber files (.g* .lgr .pho)"
#~ msgstr "Gerber-filer (.g * .lgr .pho)"
#~ msgid "Ignore source object line widths"
#~ msgstr "Ignorera källobjektets linjebredder"
#~ msgid "Conversion settings:"
#~ msgstr "Konverteringsinställningar:"
#~ msgid "Graphics Editing"
#~ msgstr "Grafikredigering"
#~ msgid "Limit actions to 45 degrees from start"
#~ msgstr "Begränsa åtgärder till 45 grader från start"
#, c-format
#~ msgid "No such file: %s"
#~ msgstr "Ingen sådan fil: %s"
#~ msgid ""
#~ "** Output already exists. Export aborted. **\n"
#~ "Enable the force overwrite flag to overwrite it."
#~ msgstr ""
#~ "** Utmatningen existerar redan. Export avbruten. **\n"
#~ "Aktivera flaggan \"tvinga överskrivning\" för att skriva över."
#, c-format
#~ msgid "Read file: '%s'\n"
#~ msgstr "Läs fil: '%s'\n"
#~ msgid ""
#~ "\n"
#~ "** Error reading kicad_pcb file. **\n"
#~ msgstr ""
#~ "\n"
#~ "** Fel vid läsning av kicad_pcb-fil. **\n"
#~ msgid "Library ID"
#~ msgstr "Biblioteks-ID"
#~ msgid "Cannot remove temporary input file"
#~ msgstr "Kan inte ta bort temporär inmatningsfil"
#~ msgid "Origin X"
#~ msgstr "Origo X"
#~ msgid "Origin Y"
#~ msgstr "Origo Y"
#~ msgid "Self-intersecting polygons are not allowed"
#~ msgstr "Självskärande polygoner är inte tillåtna"
#~ msgid "Self-intersecting polygons are not allowed."
#~ msgstr "Självskärande polygoner är inte tillåtna."
#~ msgid "Shadow on Locked Items"
#~ msgstr "Skugga på låsta objekt"
#~ msgid "Shadow on Conflicts"
#~ msgstr "Skugga på konflikter"
#~ msgid "Show a shadow on overlapping courtyards while moving footprints"
#~ msgstr "Visa skugga på överlappande gårdsplaner medan fotavtryck flyttas"
#~ msgid "Layer presets"
#~ msgstr "Lagerförinställningar"
#~ msgid "PcbNew"
#~ msgstr "PcbNew"
#~ msgid "Eeschema"
#~ msgstr "Eeschema"
#~ msgid "3D configuration directory is unknown"
#~ msgstr "3D-konfigurationskatalog är okänd"
#~ msgid "Write 3D search path list"
#~ msgstr "Skriv 3D-sökvägslista"
#~ msgid "Could not open configuration file"
#~ msgstr "Det gick inte att öppna konfigurationsfilen"
#~ msgid "Problems writing configuration file"
#~ msgstr "Problem med att skriva konfigurationsfilen"
#~ msgid "H Align (fields only):"
#~ msgstr "H Justering (endast fält):"
#~ msgid "V Align (fields only):"
#~ msgstr "V Justering (endast fält):"
#, c-format
#~ msgid ""
#~ "'%s' is not a valid symbol library table.\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "'%s' är inte en giltig symbolbibliotekstabell.\n"
#~ "\n"
#~ "%s"
#, c-format
#~ msgid ""
#~ "Error loading global symbol library table.\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "Fel vid läsning av global bibliotekstabell:\n"
#~ "\n"
#~ "%s"
#, c-format
#~ msgid ""
#~ "Failed to write project symbol library table. Error:\n"
#~ " %s"
#~ msgstr ""
#~ "Det gick inte att skriva projektsymbolens bibliotektabell. Fel:\n"
#~ " %s"
#, c-format
#~ msgid "Failed to infer model from Value '%s'"
#~ msgstr "Det gick inte att sluta sig till en modell utifrån värde '%s'"
#, c-format
#~ msgid "Failed to set parameter '%s' to '%s' in model '%s'"
#~ msgstr ""
#~ "Det gick inte att sätta parameter '%s' till värde '%s' i modell '%s'"
#~ msgid "Warning: Pad size is less than zero."
#~ msgstr "Varning: Padstorleken är mindre än noll."
#~ msgid "pcb_filename"
#~ msgstr "pcb_filnamn"
#~ msgid "IGES output (default STEP)"
#~ msgstr "IGES-utmatning (förinställning STEP)"
#~ msgid "display this message"
#~ msgstr "visa detta meddelande"
#~ msgid "Kicad2step Converter"
#~ msgstr "KiCad2step konverterare"
#, fuzzy
#~ msgid "Alias:"
#~ msgstr "Alias: "
#, c-format
#~ msgid "Duplicate items %s%s\n"
#~ msgstr "Dubbla objekt %s%s\n"
#~ msgid "Spice type:"
#~ msgstr "Spice-typ:"
#~ msgid "Default for all sheet instances"
#~ msgstr "Förinställning för alla instanser på arket"
#~ msgid ""
#~ "Check to make the unit and reference, value, and\n"
#~ "footprint fields the default for all sheet instances\n"
#~ "of this symbol"
#~ msgstr ""
#~ "Markera för att göra fälten för enhet, referens, värde och\n"
#~ "fotavtryck till förinställning för alla instanser av denna\n"
#~ "symbol på kretsschemaark"
#~ msgid "Spice Model..."
#~ msgstr "Spice Model ..."
#~ msgid "Waveform"
#~ msgstr "Vågform"
#~ msgid "Modeling accuracy"
#~ msgstr "Modelleringsnoggrannhet"
#~ msgid "Bus has no members to assign netclass to."
#~ msgstr "Buss har inga medlemmar att tilldela nätklass."
#~ msgid ""
#~ "When two metals are in contact, there will be a potential difference "
#~ "between them that will lead to corrosion.\n"
#~ "In order to avoid corrosion, it is good practice to keep the difference "
#~ "below 300mV.\n"
#~ "\n"
#~ "One of the metal will be anodic (+) and will be attacked. The other one "
#~ "will be cathodic and will be protected.\n"
#~ "In the table below, if the number is positive then the row is anodic and "
#~ "the column is cathodic. \n"
#~ "\n"
#~ "You can use an interface metal, just like with the ENIG surface finish "
#~ "that uses nickel as an interface between gold and copper to prevent "
#~ "corrosion."
#~ msgstr ""
#~ "När två metaller är i kontakt med varandra i närvaro av en ledande "
#~ "elektrolyt, kommer de att ha en potentialskillnad som leder till "
#~ "korrosion.\n"
#~ "För att undvika korrosin är det god praxis att hålla potentialskillnaden "
#~ "under 300mV.\n"
#~ "\n"
#~ "En av metallerna kommer att vara anod (+) och kommer att anfrätas. Den "
#~ "andra kommer att vara katod och kommer att skyddas.\n"
#~ "Om värdet i tabellen är positivt är raden anod och kolumnen katod. \n"
#~ " \n"
#~ "Man kan använda en gränssnittsmetall, i likhet med ENIG-ytbeläggningen "
#~ "som använder nickel som gränssnitt mellan guld och koppar för att undvika "
#~ "korrosion."
#~ msgid "Center:"
#~ msgstr "Centrum:"
#, c-format
#~ msgid "minimum gap: %s; "
#~ msgstr "minsta gap: %s; "
#, c-format
#~ msgid "maximum gap: %s; "
#~ msgstr "maximalt gap: %s; "
#, c-format
#~ msgid "actual: %s)"
#~ msgstr "faktiska: %s)"
#, c-format
#~ msgid "(expected 'Other'; actual '%s')"
#~ msgstr "(förväntar 'Annan'; faktisk '%s')"
#~ msgid "Remove Teardrops..."
#~ msgstr "Ta bort kragförstärkningar..."
#~ msgid "File Browser..."
#~ msgstr "Filhanterare..."
#~ msgid "3D Search Paths"
#~ msgstr "3D Sökvägar"
#~ msgid "Search for items"
#~ msgstr "Sök efter objekt"
#~ msgid "Exclude components with no pins"
#~ msgstr "Uteslut komponenter utan stift"
#~ msgid "Pads with different numbers overlap"
#~ msgstr "Lödytor med olika nummer överlappar"
#~ msgid "ring"
#~ msgstr "ringa"
#~ msgid "circle"
#~ msgstr "cirkel"
#~ msgid "Select PCB grid units"
#~ msgstr "Välj nätaggregat för kretskort"
#~ msgid "No-connects"
#~ msgstr "Icke-anslutningsbara"
#~ msgid "User Fields"
#~ msgstr "Användardefinierade fält"
#~ msgid "Delete Field"
#~ msgstr "Ta bort fält"
#~ msgid "Select field:"
#~ msgstr "Välj fält:"
#, c-format
#~ msgid "Pin's owner (%d) not found."
#~ msgstr "Stiftets ägare (%d) hittades inte."
#, c-format
#~ msgid "Label's owner (%d) not found."
#~ msgstr "Etikettens ägare (%d) hittades inte."
#, c-format
#~ msgid "Bezier's owner (%d) not found."
#~ msgstr "Bezierkurvans sägare (%d) hittades inte."
#, c-format
#~ msgid "Polyline's owner (%d) not found."
#~ msgstr "Polygonlinjens ägare (%d) hittades inte."
#, c-format
#~ msgid "Polygon's owner (%d) not found."
#~ msgstr "Polygonens ägare (%d) hittades inte."
#, c-format
#~ msgid "Rounded rectangle's owner (%d) not found."
#~ msgstr "Avrundade rektangelns ägare (%d) hittades inte."
#, c-format
#~ msgid "Arc's owner (%d) not found."
#~ msgstr "Bågens ägare (%d) hittades inte."
#, c-format
#~ msgid "Line's owner (%d) not found."
#~ msgstr "Linjens ägare (%d) hittades inte."
#~ msgid "Signal harness, belonging to the part is not currently supported."
#~ msgstr "Delens tillhörande signalkabelstam stöds för närvarande inte."
#~ msgid "Harness connector, belonging to the part is not currently supported."
#~ msgstr "Delens tillhörande kontakt för kabelstam stöds för närvarande inte."
#, c-format
#~ msgid "Harness entry's parent (%d) not found."
#~ msgstr "Kabelstamspostens förälder (%d) hittades inte."
#, c-format
#~ msgid "Harness type's parent (%d) not found."
#~ msgstr "Kabelstamstypens förälder (%d) hittades inte."
#, c-format
#~ msgid "Rectangle's owner (%d) not found."
#~ msgstr "Rektangelns ägare (%d) hittades inte."
#, c-format
#~ msgid "Sheet entry's owner (%d) not found."
#~ msgstr "Arkfältets ägare (%d) hittades inte."
#, c-format
#~ msgid "Sheetname's owner (%d) not found."
#~ msgstr "Arknamnets ägare (%d) hittades inte."
#, c-format
#~ msgid "Filename's owner (%d) not found."
#~ msgstr "Filnamnsägare (%d) hittades inte."
#, c-format
#~ msgid "Designator's owner (%d) not found."
#~ msgstr "Beteckningens ägare (%d) hittades inte."
#, c-format
#~ msgid "Implementation's owner (%d) not found."
#~ msgstr "Implementeringens ägare (%d) hittades inte."
#, c-format
#~ msgid "Footprint's owner (%d) not found."
#~ msgstr "Fotavtryckets ägare (%d) hittades inte."
#~ msgid "Lines drawn horizontally and vertically"
#~ msgstr "Linjer ritas horisontellt och vertikalt"
#~ msgid "Lines drawn horizontally, vertically, and at a 45 degree angle"
#~ msgstr "Linjer ritas horisontellt, vertikalt och i 45 graders vinkel"
#~ msgid "Separate sense pin"
#~ msgstr "Separat avkänningsstift"
#~ msgid "3 terminals regulator"
#~ msgstr "3-terminals regulator"
#~ msgid "Loss Tg"
#~ msgstr "Förlust Tg"
#~ msgid "Loss Tg:"
#~ msgstr "Förlust Tg:"
#~ msgid "Show pad <no net> indicator"
#~ msgstr "Visa pad <inget nät> indikator"
#~ msgid "No-Connects"
#~ msgstr "Inga anslutningar"
#~ msgid "Show a marker on pads which have no net connected"
#~ msgstr "Visa en markör på lödytor som inte har något nät anslutet"
#~ msgid "Item"
#~ msgstr "Komponent"
#, c-format
#~ msgid "Could not find library file %s."
#~ msgstr "Kunde inte hitta biblioteksfilen %s."
#~ msgid "&Vias"
#~ msgstr "&Vior"
#~ msgid "&Pads"
#~ msgstr "&Lödytor"
#, c-format
#~ msgid "Through hole pad %s of %s"
#~ msgstr "Hålmonterings-lödyta %s för %s"
#, c-format
#~ msgid "Through hole pad %s %s of %s"
#~ msgstr "Hålmonterings-lödyta %s %s för %s"
#~ msgid "Net Tools"
#~ msgstr "Nätverktyg"
#~ msgid "Special Tools"
#~ msgstr "Specialverktyg"
#~ msgid "Highlight Selected Net"
#~ msgstr "Framhäv det valda nätet"
#~ msgid "Hide Net"
#~ msgstr "Dölj nät"
#~ msgid "Hide the ratsnest for the selected net"
#~ msgstr "Dölj nätlinjer för det valda nätet"
#~ msgid "Show the ratsnest for the selected net"
#~ msgstr "Visa nätlinjer för det valda nätet"
#~ msgid "Bus Aliases"
#~ msgstr "Bussalias"
#~ msgid "Alias Name"
#~ msgstr "Alias Namn"
#~ msgid "Rename"
#~ msgstr "Byt Namn"
#~ msgid "Alias Members"
#~ msgstr "Aliasmedlemmar"
#~ msgid "Member Name"
#~ msgstr "Medlemsnamn"
#~ msgid "Bus Alias Name"
#~ msgstr "Bussaliasnamn"
#, c-format
#~ msgid ""
#~ "Error parsing spice code <%s>\n"
#~ "%s"
#~ msgstr ""
#~ "Fel vid inläsning av spice-kod <%s>\n"
#~ "%s"
#, c-format
#~ msgid ""
#~ "Error parsing param <%s>\n"
#~ "%s"
#~ msgstr ""
#~ "Fel vid inläsning av parameter <%s>\n"
#~ "%s"
#, c-format
#~ msgid ""
#~ "Error parsing pin field <%s>\n"
#~ "%s"
#~ msgstr ""
#~ "Fel vid inläsning av stiftfält <%s>\n"
#~ "%s"
#~ msgid "Bus Definitions..."
#~ msgstr "Bussdefinitioner ..."
#~ msgid "Manage bus definitions"
#~ msgstr "Hantera bussdefinitioner"
#~ msgid "Navigate to page"
#~ msgstr "Navigera till sidan"
#~ msgid "NetName"
#~ msgstr "Nätnamn"
#~ msgid "NetClass"
#~ msgstr "Nätklass"
#~ msgid ""
#~ "Do not allow position of pad relative to parent footprint to be changed"
#~ msgstr ""
#~ "Tillåt inte ändring av lödytans position relativt överordnat fotavtryck"
#~ msgid "Environment Variable Help"
#~ msgstr "Hjälp om miljövariabler"
#~ msgid "Filter Nets"
#~ msgstr "Filtrera nät"
#~ msgid "Net class filter:"
#~ msgstr "Nätklassfilter:"
#~ msgid "Apply Filters"
#~ msgstr "Applicera filter"
#~ msgid "Assign Net Class"
#~ msgstr "Tilldela Nätklass"
#~ msgid "New net class:"
#~ msgstr "Ny nätklass:"
#~ msgid "Assign To All Listed Nets"
#~ msgstr "Tilldela till alla listade nät"
#~ msgid "Assign To Selected Nets"
#~ msgstr "Tilldela till valda nät"
#, c-format
#~ msgid "Unknown Record id: %d."
#~ msgstr "Okänt Record-id: %d."
#~ msgid "Floating point number with incorrect locale"
#~ msgstr "Flyttalsnummer med inkorrekt lokalisering"
#~ msgid "Missing floating point number"
#~ msgstr "Flyttalsnummer saknas"
#~ msgid "Netclasses"
#~ msgstr "Nätklasser"
#~ msgid "Assign Netclass"
#~ msgstr "Tilldela Netclass"
#~ msgid "Select netclass:"
#~ msgstr "Välj nätklass:"
#~ msgid "Edit Symbol Name"
#~ msgstr "Redigera symbolnamn"
#~ msgid "Auto-finish Track"
#~ msgstr "Auto-avsluta ledare"
#~ msgid "Automatically finishes laying the current track."
#~ msgstr "Färdigställer automatiskt den aktuella ledaren."
#, c-format
#~ msgid "Net Class: %s"
#~ msgstr "Nätklass: %s"
#, c-format
#~ msgid "Multiple symbols have identical reference IDs of '%s'."
#~ msgstr "Flera symboler har identiska referens-ID:n '%s'."
#, c-format
#~ msgid "Session file uses invalid layer id \"%s\""
#~ msgstr "Sessionsfilen använder ogiltigt lager-id \"%s\""
#~ msgid "Max height"
#~ msgstr "Maximal höjd"
#~ msgid "percent of d"
#~ msgstr "procent av d"
#~ msgid "Max height/d"
#~ msgstr "Maximal höjd/d"
#~ msgid "percent of H/d"
#~ msgstr "procent av H/d"
#~ msgid "Not drilled pads"
#~ msgstr "Ej borrade lödytor"
#~ msgid "Style for round shapes"
#~ msgstr "Stil för runda former"
#~ msgid "Style for rect shapes"
#~ msgstr "Stil för rektangulära former"
#~ msgid "Style for tracks"
#~ msgstr "Stil för ledare"
#~ msgid "Allows use two tracks"
#~ msgstr "Tillåter användning av två ledarsegment"
#~ msgid "Teardrop Settings"
#~ msgstr "Kragförstärkningsinställningar"
#, c-format
#~ msgid "Net %s\tNetClass %s\tPadName %s"
#~ msgstr "Nät %s\tNätKlass %s\tPadNamn %s"
#~ msgid "Reformat passive symbol values"
#~ msgstr "Omformatera värden för passiva symboler"
#~ msgid "Reformat passive symbol values e.g. 1M -> 1Meg"
#~ msgstr ""
#~ "Omformatera värden tillhörande symboler för passiva komponenter, t.ex. 1M "
#~ "-> 1Meg"
#~ msgid "Diode"
#~ msgstr "Diod"
#~ msgid "BJT"
#~ msgstr "BJT"
#~ msgid "MOSFET"
#~ msgstr "MOSFET"
#~ msgid "JFET"
#~ msgstr "JFET"
#~ msgid "Subcircuit"
#~ msgstr "Underkrets"
#~ msgid ""
#~ "Symbol pin numbering don't always match the required SPICE pin order\n"
#~ "Check the symbol and use \"Alternate node sequence\" to reorder the pins, "
#~ "if necessary"
#~ msgstr ""
#~ "Symbolernas stiftnumrering matchar inte alltid den önskade SPICE-pin-"
#~ "ordningen\n"
#~ "Kontrollera symbolen och använd \"Alternativ nodsekvens\" för att ordna "
#~ "om stiften, om det behövs"
#~ msgid "For a Diode, pin order is anode, cathode"
#~ msgstr "För en diod är stiftordningen anod, katod"
#~ msgid ""
#~ "For a BJT, pin order is collector, base, emitter, substrate (optional)"
#~ msgstr ""
#~ "För en BJT är stiftordningen kollektor, bas, emitter, substrat (valfritt)"
#~ msgid "For a MOSFET, pin order is drain, gate, source"
#~ msgstr "För en MOSFET är stiftens ordning drain, gate, source"
#~ msgid "For a JFET, pin order is drain, gate, source"
#~ msgstr "För en JFET är stiftens ordning drain, gate, source"
#~ msgid "Invalid Impedance value"
#~ msgstr "Ogiltigt impedansvärde"
#~ msgid "Invalid delay value"
#~ msgstr "Ogiltigt fördröjningsvärde"
#~ msgid "Invalid frequency value"
#~ msgstr "Ogiltigt frekvensvärde"
#~ msgid "Invalid length in wavelength value"
#~ msgstr "Ogiltig längd i våglängdsvärde"
#~ msgid "Invalid resistance value"
#~ msgstr "Ogiltigt resistansvärde"
#~ msgid "Invalid capacitance value"
#~ msgstr "Ogiltigt kapacitansvärde"
#~ msgid "Invalid inductance value"
#~ msgstr "Ogiltigt induktansvärde"
#~ msgid "Invalid conductance value"
#~ msgstr "Ogiltigt konduktansvärde"
#~ msgid "Invalid length value"
#~ msgstr "Ogiltigt längdvärde"
#, c-format
#~ msgid ""
#~ "You need to specify at least the first %d parameters for the transient "
#~ "source"
#~ msgstr ""
#~ "Du måste åtminstone specificera de första %d parametrarna för den "
#~ "transienta källan"
#~ msgid ""
#~ "You cannot leave interleaved empty fields when defining a transient source"
#~ msgstr ""
#~ "Du kan inte lämna överlappande tomma fält när du definierar en transient "
#~ "källa"
#~ msgid "Select library"
#~ msgstr "Välj bibliotek"
#~ msgid "Range:"
#~ msgstr "Räckvidd:"
#~ msgid "Offset:"
#~ msgstr "Förskjutning:"
#~ msgid "Standard deviation:"
#~ msgstr "Standardavvikelse:"
#~ msgid "Mean:"
#~ msgstr "Betyda:"
#~ msgid "Lambda:"
#~ msgstr "Lambda:"
#~ msgid "type of random generator for source is invalid"
#~ msgstr "typen av slumpmässig generator för källan är ogiltig"
#~ msgid "Resistor"
#~ msgstr "Motstånd"
#~ msgid "Capacitor"
#~ msgstr "Kondensator"
#~ msgid "Inductor"
#~ msgstr "Induktor"
#~ msgid "Passive type"
#~ msgstr "Passiv typ"
#~ msgid "Spice value in simulation"
#~ msgstr "Spice-värde i simulering"
#~ msgid ""
#~ "In Spice values, the decimal separator is the point.\n"
#~ "Values can use Spice unit symbols."
#~ msgstr ""
#~ "I Spice-värden används decimalpunkt.\n"
#~ "Värden kan använda Spices enhetssymboler."
#~ msgid "Spice unit symbols in values (case insensitive):"
#~ msgstr "Spice enhetssymboler i värden (skiftlägeskänsliga):"
#~ msgid "Select file..."
#~ msgstr "Välj fil..."
#~ msgid "Note:"
#~ msgstr "Notering:"
#~ msgid "note"
#~ msgstr "notera"
#~ msgid "DC/AC Analysis"
#~ msgstr "DC / AC-analys"
#~ msgid "DC:"
#~ msgstr "DC:"
#~ msgid "Volts/Amps"
#~ msgstr "Volt / förstärkare"
#~ msgid "AC magnitude:"
#~ msgstr "AC-storlek:"
#~ msgid "radians"
#~ msgstr "radianer"
#~ msgid "Transient Analysis"
#~ msgstr "Övergående analys"
#~ msgid "Initial value:"
#~ msgstr "Ursprungligt värde:"
#~ msgid "Pulsed value:"
#~ msgstr "Pulsat värde:"
#~ msgid "Delay time:"
#~ msgstr "Försening:"
#~ msgid "Rise time:"
#~ msgstr "Stigtid:"
#~ msgid "Pulse width:"
#~ msgstr "Pulsbredd:"
#~ msgid "Pulse"
#~ msgstr "Puls"
#~ msgid "DC offset:"
#~ msgstr "DC-förskjutning:"
#~ msgid "Amplitude:"
#~ msgstr "Amplitud:"
#~ msgid "Damping factor:"
#~ msgstr "Dämpningsfaktor:"
#~ msgid "1/seconds"
#~ msgstr "1 / sekunder"
#~ msgid "Sinusoidal"
#~ msgstr "Sinus"
#~ msgid "Rise delay time:"
#~ msgstr "Uppgångsfördröjningstid:"
#~ msgid "Rise time constant:"
#~ msgstr "Stiga tidskonstant:"
#~ msgid "Fall delay time:"
#~ msgstr "Fallfördröjningstid:"
#~ msgid "Fall time constant:"
#~ msgstr "Falltidskonstant:"
#~ msgid "Exponential"
#~ msgstr "Exponentiell"
#~ msgid "Piece-wise linear"
#~ msgstr "Delvis linjär"
#~ msgid "Time:"
#~ msgstr "Tid:"
#~ msgid "second"
#~ msgstr "andra"
#~ msgid "Piece-wise Linear"
#~ msgstr "Delvis linjär"
#~ msgid "Carrier frequency:"
#~ msgstr "Bärvågsfrekvens:"
#~ msgid "Modulation index:"
#~ msgstr "Modulationsindex:"
#~ msgid "Signal frequency:"
#~ msgstr "Signalfrekvens:"
#~ msgid "Carrier phase:"
#~ msgstr "Transportörsfas:"
#~ msgid "degrees"
#~ msgstr "grader"
#~ msgid "Signal phase:"
#~ msgstr "Signalfas:"
#~ msgid "FM"
#~ msgstr "FM"
#~ msgid "Modulating frequency:"
#~ msgstr "Moduleringsfrekvens:"
#~ msgid "Signal delay:"
#~ msgstr "Signalfördröjning:"
#~ msgid "AM"
#~ msgstr "fm"
#~ msgid "Transient noise"
#~ msgstr "Övergående ljud"
#~ msgid "Uniform"
#~ msgstr "Enhetlig"
#~ msgid "Gaussian"
#~ msgstr "Gaussisk"
#~ msgid "Poisson"
#~ msgstr "Poisson"
#~ msgid "Individual value duration:"
#~ msgstr "Varaktighet för enskilt värde:"
#~ msgid "Time delay:"
#~ msgstr "Tidsfördröjning:"
#~ msgid "Random"
#~ msgstr "Slumpmässig"
#~ msgid "External data"
#~ msgstr "Externa data"
#~ msgid "Source Type"
#~ msgstr "Källtyp"
#~ msgid "Line model"
#~ msgstr "Transmissionslinjemodell"
#~ msgid "Propagation delay"
#~ msgstr "Utbredningsfördröjning"
#~ msgid "Length in wavelength"
#~ msgstr "Längd i våglängder"
#~ msgid "Use time delay"
#~ msgstr "Använd tidsfördröjning"
#~ msgid "Use frequency and number of wavelength"
#~ msgstr "Använd frekvens och antal våglängder"
#~ msgid "Delay / Electrical length"
#~ msgstr "Fördröjning / Elektrisk längd"
#~ msgid "Lossless"
#~ msgstr "Förlustfri"
#~ msgid "Resistance per unit length"
#~ msgstr "Resistans per enhetslängd"
#~ msgid "ohm / unit"
#~ msgstr "ohm / enhet"
#~ msgid "Inductance per unit length"
#~ msgstr "Induktans per enhetslängd"
#~ msgid "henry / unit"
#~ msgstr "henry / enhet"
#~ msgid "Capacitance per unit length"
#~ msgstr "Kapacitans per enhetslängd"
#~ msgid "farad / unit"
#~ msgstr "farad / enhet"
#~ msgid "Conductance per unit length"
#~ msgstr "Konduktans per enhetslängd"
#~ msgid "siemens / unit"
#~ msgstr "siemens / enhet"
#~ msgid "Extra parameters"
#~ msgstr "Extra parametrar"
#~ msgid ""
#~ "The following types of lines have been implemented so far:\n"
#~ "\n"
#~ "- RLC\n"
#~ "- RC\n"
#~ "- LC\n"
#~ "- RG\n"
#~ "\n"
#~ "Any other combination will yield erroneous results and should not be "
#~ "tried."
#~ msgstr ""
#~ "Följande transmissionslinjetyper har implementerats hittills:\n"
#~ "\n"
#~ "- RLC\n"
#~ "- RC\n"
#~ "- LC\n"
#~ "- RG\n"
#~ "\n"
#~ "Försök inte med någon annan typ, då det kommer att ge felaktiga resultat."
#~ msgid "Lossy"
#~ msgstr "Med förlust"
#~ msgid "Transmission Line"
#~ msgstr "Transmissionslinje"
#~ msgid "Alternate node sequence:"
#~ msgstr "Alternativ nodsekvens:"
#~ msgid "GerbView"
#~ msgstr "GerbView"
#~ msgid "Fomatting"
#~ msgstr "Formatering"
#~ msgid "HatchBorder Lines"
#~ msgstr "Rutnäts kantlinjer"
#~ msgid "Image Editor"
#~ msgstr "Bildredigerare"
#~ msgid "The radius cannot be zero."
#~ msgstr "Radien kan inte vara noll."
#~ msgid "The arc angle cannot be zero."
#~ msgstr "Bågvinkeln kan inte vara noll."
#~ msgid "The rectangle cannot be empty."
#~ msgstr "Rektangeln kan inte vara tom."
#~ msgid "File Open Error"
#~ msgstr "Filöppningsfel"
#~ msgid "Highlight the selected net"
#~ msgstr "Markera det valda nätet"
#~ msgid "Allowed features"
#~ msgstr "Tillåtna funktioner"
#~ msgid "Allow blind/buried vias"
#~ msgstr "Tillåt blinda/begravda vior"
#~ msgid "Allow micro vias (uVias)"
#~ msgstr "Tillåt mikrovior (uVior)"
#~ msgid "Show board setup"
#~ msgstr "Visa mönsterkortsinställningar"
#~ msgid ""
#~ "Blind/buried vias must first be enabled in Board Setup > Design Rules > "
#~ "Constraints."
#~ msgstr ""
#~ "Blinda/begravda vior måste först aktiveras i Mönsterkortsinställningar > "
#~ "Designregler > Begränsningar."
#~ msgid ""
#~ "Microvias must first be enabled in Board Setup > Design Rules > "
#~ "Constraints."
#~ msgstr ""
#~ "Mikrovior måste först aktiveras i Mönsterkortsinställningar > "
#~ "Designregler > Begränsningar."
#, fuzzy
#~ msgid "Cross-probe on selection"
#~ msgstr "Korsreferera vid val"
#, fuzzy
#~ msgid "Scroll cross-probed items into view"
#~ msgstr "Flytta vy till korsrefererade objekt"
#~ msgid "F.Cu"
#~ msgstr "F.Cu"
#~ msgid "In1.Cu"
#~ msgstr "In1.Cu"
#~ msgid "In2.Cu"
#~ msgstr "In2.Cu"
#~ msgid "In3.Cu"
#~ msgstr "In3.Cu"
#~ msgid "In4.Cu"
#~ msgstr "In4.Cu"
#~ msgid "In5.Cu"
#~ msgstr "In5.Cu"
#~ msgid "In6.Cu"
#~ msgstr "In6.Cu"
#~ msgid "In7.Cu"
#~ msgstr "In7.Cu"
#~ msgid "In8.Cu"
#~ msgstr "In8.Cu"
#~ msgid "In9.Cu"
#~ msgstr "In9.Cu"
#~ msgid "In10.Cu"
#~ msgstr "In10.Cu"
#~ msgid "In11.Cu"
#~ msgstr "In11.Cu"
#~ msgid "In12.Cu"
#~ msgstr "In12.Cu"
#~ msgid "In13.Cu"
#~ msgstr "In13.Cu"
#~ msgid "In14.Cu"
#~ msgstr "In14.Cu"
#~ msgid "In15.Cu"
#~ msgstr "In15.Cu"
#~ msgid "In16.Cu"
#~ msgstr "In16.Cu"
#~ msgid "In17.Cu"
#~ msgstr "In17.Cu"
#~ msgid "In18.Cu"
#~ msgstr "In18.Cu"
#~ msgid "In19.Cu"
#~ msgstr "In19.Cu"
#~ msgid "In20.Cu"
#~ msgstr "In20.Cu"
#~ msgid "In21.Cu"
#~ msgstr "In21.Cu"
#~ msgid "In22.Cu"
#~ msgstr "In22.Cu"
#~ msgid "In23.Cu"
#~ msgstr "In23.Cu"
#~ msgid "In24.Cu"
#~ msgstr "In24.Cu"
#~ msgid "In25.Cu"
#~ msgstr "In25.Cu"
#~ msgid "In26.Cu"
#~ msgstr "In26.Cu"
#~ msgid "In27.Cu"
#~ msgstr "In27.Cu"
#~ msgid "In28.Cu"
#~ msgstr "In28.Cu"
#~ msgid "In29.Cu"
#~ msgstr "In29.Cu"
#~ msgid "In30.Cu"
#~ msgstr "In30.Cu"
#~ msgid "B.Cu"
#~ msgstr "B.Cu"
#~ msgid "B.Adhesive"
#~ msgstr "B.Adhesive"
#~ msgid "F.Adhesive"
#~ msgstr "F.Adhesive"
#~ msgid "B.Paste"
#~ msgstr "B.Paste"
#~ msgid "F.Paste"
#~ msgstr "F.Paste"
#~ msgid "B.Silkscreen"
#~ msgstr "B.Anvisningstryck"
#~ msgid "F.Silkscreen"
#~ msgstr "F.Anvisningstryck"
#~ msgid "B.Mask"
#~ msgstr "B.Mask"
#~ msgid "F.Mask"
#~ msgstr "F.Mask"
#~ msgid "User.Drawings"
#~ msgstr "User.Drawings"
#~ msgid "User.Comments"
#~ msgstr "User.Comments"
#~ msgid "User.Eco1"
#~ msgstr "User.Eco1"
#~ msgid "User.Eco2"
#~ msgstr "User.Eco2"
#~ msgid "Edge.Cuts"
#~ msgstr "Edge.Cuts"
#~ msgid "F.Courtyard"
#~ msgstr "F.Courtyard"
#~ msgid "B.Courtyard"
#~ msgstr "B.Courtyard"
#~ msgid "F.Fab"
#~ msgstr "F.Fab"
#~ msgid "B.Fab"
#~ msgstr "B.Fab"
#~ msgid "User.1"
#~ msgstr "User.1"
#~ msgid "User.2"
#~ msgstr "User.2"
#~ msgid "User.3"
#~ msgstr "User.3"
#~ msgid "User.4"
#~ msgstr "User.4"
#~ msgid "User.5"
#~ msgstr "User.5"
#~ msgid "User.6"
#~ msgstr "User.6"
#~ msgid "User.7"
#~ msgstr "User.7"
#~ msgid "User.8"
#~ msgstr "User.8"
#~ msgid "User.9"
#~ msgstr "User.9"
#, c-format
#~ msgid "Violations (%d)"
#~ msgstr "Överträdelser (%d)"
#, c-format
#~ msgid "Ignored Tests (%d)"
#~ msgstr "Ignorerade test (%d)"
#~ msgid "135 deg Angle"
#~ msgstr "135 graders vinkel"
#, c-format
#~ msgid "Unit %c"
#~ msgstr "Enhet %c"
#~ msgid "DPs evaluated:"
#~ msgstr "Utvärderade DP: er:"
#~ msgid "Keep hierarchy navigator open"
#~ msgstr "Håll hierarkinavigatorn öppen"
#~ msgid ""
#~ "Lines drawn horizontally and vertically, with a 45 degree angle start"
#~ msgstr ""
#~ "Linjer ritas horisontellt och vertikalt, med 45 graders vinkel i början"
#~ msgid "Selection only"
#~ msgstr "Endast markering"
#, fuzzy
#~ msgid "Add Default"
#~ msgstr "Förinställning"
#~ msgid "Constrain outline to H, V and 45 degrees"
#~ msgstr "Begränsa konturerna till H, V och 45 grader"
#~ msgid "Constrain outline to H, V and 45 deg"
#~ msgstr "Begränsa konturerna till H, V och 45 grader"
#~ msgid "Draw the area using horizontal, vertical and 45 degree lines only"
#~ msgstr ""
#~ "Rita området med endast horisontella, vertikala och 45 graders linjer"
#~ msgid "Add Layer Alignment Target"
#~ msgstr "Lägg till Layer Alignment Target"
#~ msgid "Add a layer alignment target"
#~ msgstr "Lägg till ett lagerinriktningsmål"
#~ msgid "Draw selected text items as box"
#~ msgstr "Rita valda textobjekt som en ruta"
#, c-format
#~ msgid "%s closed [pid=%d]\n"
#~ msgstr "%s stängt [pid = %d]\n"
#, c-format
#~ msgid "%s %s opened [pid=%ld]\n"
#~ msgstr "%s %s öppnade [pid = %ld]\n"
#~ msgid "Checking mechanical clearances..."
#~ msgstr "Kontrollerar mekanisk frigång..."
#~ msgid "Save Copy As..."
#~ msgstr "Spara Kopia Som..."
#, c-format
#~ msgid "The name '%s' conflicts with an existing entry in the library '%s'."
#~ msgstr "Namnet '%s' strider mot en befintlig post i biblioteket '%s'."
#~ msgid "Hierarchical path: "
#~ msgstr "Hierarkisk väg: "
#, c-format
#~ msgid "Selecting all from sheet \"%s\""
#~ msgstr "Välja allt från blad \"%s\""
#~ msgid "Check zones..."
#~ msgstr "Kontrollera zoner..."
#~ msgid "Check items..."
#~ msgstr "Kontrollera stift ..."
#~ msgid "Items checked..."
#~ msgstr "Kontrollerat objekt..."
#~ msgid "Finished..."
#~ msgstr "Klart..."
#~ msgid "Too large value for pad delta size."
#~ msgstr "För stort värde för paddeltastorlek."
#~ msgid "Warning: Through hole pad has no hole."
#~ msgstr "Varning: Hålmonterings-lödyta har inget hål."
#~ msgid "default"
#~ msgstr "standard"
#, c-format
#~ msgid "Footprint %s zone connection: %s."
#~ msgstr "Fotavtryck %s zonanslutning: %s."
#, c-format
#~ msgid "Expected \"SMD\" type but set to \"%s\""
#~ msgstr "Väntade \"SMD\"-typ men var \"%s\""
#, c-format
#~ msgid "Expected \"Other\" type but set to \"%s\""
#~ msgstr "Väntade \"Other\"-typ men var \"%s\""
#, c-format
#~ msgid "Minimum thermal spoke count: %d."
#~ msgstr "Minsta antal termiska ekrar: %d."
#~ msgid "Items are not connected. No thermal spokes will be generated."
#~ msgstr "Objekt är inte förbundna. Inga termiska avlastningar skapas."
#, c-format
#~ msgid "Clearance: %s."
#~ msgstr "Isolationsavstånd: %s."
#~ msgid "Mechanical"
#~ msgstr "Mekaniska"
#~ msgid "Reference designator hidden (it is required and can not be deleted)."
#~ msgstr "Referensbeteckning gömd (den är nödvändig och kan inte raderas)."
#~ msgid "Value hidden (it is required and can not be deleted)."
#~ msgstr "Värdet gömt (det är obligatoriskt och kan inte raderas)."
#~ msgid "Clean vias and tracks"
#~ msgstr "Städa upp vior och ledare"
#~ msgid "Remove misconnected"
#~ msgstr "Ta bort felanslutna"
#~ msgid "Delete tracks in pads"
#~ msgstr "Ta bort ledare inneslutna i lödytor"
#~ msgid "Merge segments"
#~ msgstr "Slå samman segment"
#~ msgid "Normal save as operation"
#~ msgstr "Normal spara som drift"
#~ msgid "Replace library table entry"
#~ msgstr "Ersätt biblioteksbordsposten"
#~ msgid "track width"
#~ msgstr "ledarbredd"
#~ msgid "annular width"
#~ msgstr "kragbredd"
#~ msgid "via diameter"
#~ msgstr "via-diameter"
#~ msgid "constraint"
#~ msgstr "begränsning"
#~ msgid ""
#~ "Replace symbol library table entry with new library.\n"
#~ "\n"
#~ "The original library will no longer be available for use."
#~ msgstr ""
#~ "Ersätt symbolbibliotekspost med nytt bibliotek.\n"
#~ "\n"
#~ "Det ursprungliga biblioteket kommer inte längre att vara tillgängligt för "
#~ "användning."
#~ msgid ""
#~ "Add new entry to the global symbol library table.\n"
#~ "\n"
#~ "The symbol library table nickname is suffixed with\n"
#~ "an integer to ensure no duplicate table entries."
#~ msgstr ""
#~ "Lägg till ny post i den globala symbolbibliotekstabellen.\n"
#~ "\n"
#~ "Smeknamnet på symbolbibliotekets tabell är försett med\n"
#~ "ett heltalssuffix för att förhindra duplicerade tabellposter."
#~ msgid ""
#~ "Add new entry to the project symbol library table.\n"
#~ "\n"
#~ "The symbol library table nickname is suffixed with\n"
#~ "an integer to ensure no duplicate table entries."
#~ msgstr ""
#~ "Lägg till ny post i projektets symbolbibliotekstabell.\n"
#~ "\n"
#~ "Smeknamnet på symbolbibliotekets tabell är försett med\n"
#~ "ett heltalssuffix för att förhindra duplicerade tabellposter."
#, c-format
#~ msgid ""
#~ "<b>Duplicate pin %s</b> %s at location <b>(%.3f, %.3f)</b> conflicts with "
#~ "pin %s%s at location <b>(%.3f, %.3f)</b> in units %c and %c of converted."
#~ msgstr ""
#~ "<b> Dubbelt stift %s </b> %s på plats <b> (%.3f, %.3f) </b> strider mot "
#~ "stift %s%s på plats <b> ( %.3f, %.3f) </b> i enheter %c och %c av "
#~ "konverterad."
#, c-format
#~ msgid ""
#~ "<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
#~ "%s%s at location <b>(%s, %s)</b> in units %c and %c."
#~ msgstr ""
#~ "<b>Dublettstift %s</b> %s\" på plats <b>(%s, %s)</b> strider mot stift "
#~ "%s%s på plats <b> ( %s, %s)</b> i enheter %c och %c."
#, c-format
#~ msgid "Checking %s %s: %s."
#~ msgstr "Kontrollerar %s %s: %s."
#~ msgid "Set line width to 0 to use Schematic Editor line widths."
#~ msgstr ""
#~ "Sätt bredden till 0 för att använda kretsschemaredigerarens förinställda "
#~ "linjebredd."
#~ msgid "Set line color to transparent to use Schematic Editor colors."
#~ msgstr ""
#~ "Välj transparent linjefärg för att använda kretsschemaredigerarens färger."
#~ msgid "Constrain buses and wires to H or V"
#~ msgstr "Begränsa bussar och ledningar till H- och V-orientering"
#~ msgid "Switch H & V only mode for new wires and buses"
#~ msgstr "Byt endast H & V-läge för nya ledningar och bussar"
#~ msgid "Plot Edge.Cuts on all layers"
#~ msgstr "Plotta kortkonturer på alla lager"
#~ msgid "Plot the contents of the PCB edge layer on all layers"
#~ msgstr "Plotta innehållet i kortkonturslagret på alla andra lager"
#~ msgid "Synchronized pins edit mode, and this pin is new"
#~ msgstr "Redigeringsläge för synkroniserade stift, och detta stift är nytt"
#~ msgid ""
#~ "Similar pins will be automatically added to other units, if this pin is "
#~ "not common to all units"
#~ msgstr ""
#~ "Liknande pins kommer automatiskt tillägas andra enheter, om denna pin "
#~ "inte är gemensam för alla enheter"
#~ msgid "Synchronized pins edit mode"
#~ msgstr "Redigeringsläge för synkroniserade stift"
#~ msgid ""
#~ "Similar pins at the same location will be edited. Pin number of other "
#~ "pins will be not modified"
#~ msgstr ""
#~ "Liknande pins vid samma plats kommer redigeras. Andra pins nummer kommer "
#~ "inte redigeras"
#~ msgid "info"
#~ msgstr "info"
#, c-format
#~ msgid "(pad \"%s\")"
#~ msgstr "(lödyta '%s')"
#~ msgid ""
#~ "There are library names in the loaded schematic that are missing from the "
#~ "project library table. This may result in broken symbol library links "
#~ "for the loaded schematic. Do you wish to continue?"
#~ msgstr ""
#~ "Det finns biblioteksnamn i den laddade kretsschemat som saknas i "
#~ "projektbibliotektabellen. Detta kan resultera i brutna "
#~ "symbolbibliotekslänkar för den laddade schemat. Vill du fortsätta?"
#~ msgid ""
#~ "The schematic to be imported appears to have been created as part of a "
#~ "different project. This can result in symbol library links which are "
#~ "missing from or clash with symbol library links in the global symbol and/"
#~ "or current project symbol library table.\n"
#~ "\n"
#~ "Do you wish to continue?"
#~ msgstr ""
#~ "Schemat som skall importeras verkar ha skapats som del av ett annat "
#~ "projekt. Detta kan resultera i symbolbibliotekslänkar som saknas eller "
#~ "som är i konflikt med symbolbibliotekslänkar i den globala och/eller "
#~ "projektetspecifika symbolbibliotekstabellen.\n"
#~ "\n"
#~ "Vill du fortsätta?"
#~ msgid ""
#~ "There are library names in the loaded schematic that are missing from the "
#~ "loaded schematic project library table. This may result in broken symbol "
#~ "library links for the schematic. Do you wish to continue?"
#~ msgstr ""
#~ "Det finns biblioteksnamn i det laddade kretsschemat som saknas i den "
#~ "laddade projektbibliotekstabellen för kretsschemat. Detta kan resultera i "
#~ "brutna symbolbibliotekslänkar för kretsschemat. Vill du fortsätta?"
#~ msgid ""
#~ "A duplicate library name that references a different library exists in "
#~ "the current library table. This conflict cannot be resolved and may "
#~ "result in broken symbol library links for the schematic. Do you wish to "
#~ "continue?"
#~ msgstr ""
#~ "Ett duplicerat biblioteksnamn som refererar till ett annat bibliotek "
#~ "finns i den aktuella bibliotektabellen. Denna konflikt kan inte lösas och "
#~ "kan leda till brutna symbolbibliotekslänkar för schemat. Vill du "
#~ "fortsätta?"
#~ msgid " (PTH pad has no copper layers)"
#~ msgstr " (Hålmonteringslödyta har inga kopparlager)"
#~ msgid "Bl/Buried vias"
#~ msgstr "Dolda vior"
#, c-format
#~ msgid ""
#~ "The project library table '%s' does not exist or cannot be read. This "
#~ "may result in broken symbol links for the schematic. Do you wish to "
#~ "continue?"
#~ msgstr ""
#~ "Projektbibliotekstabellen '%s' finns inte eller kan inte läsas. Detta kan "
#~ "resultera i brutna symbollänkar för schemat. Vill du fortsätta?"
#~ msgid ""
#~ "Warning: Pad drill will leave no copper or drill shape and pad shape do "
#~ "not overlap."
#~ msgstr ""
#~ "Varning: dynborren lämnar ingen koppar eller borren, och padformen "
#~ "överlappar inte varandra."
#~ msgid "No netlist provided, skipping schematic parity tests."
#~ msgstr ""
#~ "Ingen nätlista har tillhandahållits, hoppar över paritetstest för schema."
#, c-format
#~ msgid "Testing %d silkscreen features against %d board items."
#~ msgstr "Testar %d anvisningstrycks egenskaper mot %d mönsterkortsobjekt."
#~ msgid "H align:"
#~ msgstr "H inriktning:"
#~ msgid "V align:"
#~ msgstr "V-inriktning:"
#~ msgid "Via Drill"
#~ msgstr "Via-borr"
#~ msgid "uVia Drill"
#~ msgstr "uVia-borr"
#~ msgid "Via drill size must be smaller than via diameter"
#~ msgstr "Viahålsstorleken måste vara mindre än via-diametern"
#~ msgid "Via drill:"
#~ msgstr "Via borr:"
#~ msgid "Track Width and Via Size"
#~ msgstr "Ledarbredd och Via-storlek"
#~ msgid "Copper zone net has no pads"
#~ msgstr "Kopparzons nät har inga lödytor"
#~ msgid "Drill"
#~ msgstr "Borra"
#, c-format
#~ msgid "Via %s, drill %s"
#~ msgstr "Via %s, borra %s"
#~ msgid "Zone has no connections."
#~ msgstr "Zonen har inga anslutningar."
#~ msgid "TransLine "
#~ msgstr "TransLedn "
#~ msgid "Refill zones after Zone Properties dialog"
#~ msgstr "Återfyll zoner efter dialogrutan Egenskaper för kopparzon"
#, c-format
#~ msgid ""
#~ "Polygon found on an Altium layer (%d) with no KiCad equivalent. It has "
#~ "been moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Polygon hittad på ett Altium-lager (%d) som saknar motsvarighet i KiCad. "
#~ "Den har flyttats till KiCad-lagret Eco1_User."
#, c-format
#~ msgid ""
#~ "Zone found on an Altium layer (%d) with no KiCad equivalent. It has been "
#~ "moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Zon hittad på ett Altium-lager (%d) som saknar motsvarighet i KiCad. Den "
#~ "har flyttats till KiCad-lagret Eco1_User."
#~ msgid "Performing polygon fills..."
#~ msgstr "Utföra polygonfyllningar ..."
#~ msgid "Mimic legacy behavior"
#~ msgstr "Efterlikna arv beteende"
#~ msgid ""
#~ "Produces a slightly smoother outline at the expense of performance, some "
#~ "export fidelity issues, and overly aggressive higher-priority zone "
#~ "knockouts."
#~ msgstr ""
#~ "Producerar en något jämnare kontur på bekostnad av prestanda, vissa "
#~ "problem med återgivningens naturtrogenhet vid export och överdrivet "
#~ "aggressiva urtag för zoner med högre prioritet."
#~ msgid "Smoothed polygons (best performance)"
#~ msgstr "Utjämnade polygoner (bästa prestanda)"
#~ msgid ""
#~ "Better performance, exact export fidelity, and more complete filling near "
#~ "higher-priority zones."
#~ msgstr ""
#~ "Bättre prestanda, exakt exportfidelitet och mer komplett fyllning nära "
#~ "zoner med högre prioritet."
#~ msgid "Units are not interchangeable"
#~ msgstr "Enheterna är inte utbytbara"
#~ msgid ""
#~ "Check this option to allow symbols with multiple units to have different\n"
#~ "elements. Uncheck this option when all symbol units are identical "
#~ "except\n"
#~ "for pin numbers."
#~ msgstr ""
#~ "Markera det här alternativet för att tillåta att symboler med flera "
#~ "enheter har olika\n"
#~ "element. Avmarkera det här alternativet när alla symbolenheter är "
#~ "identiska utom\n"
#~ "för pin-nummer."
#, fuzzy, c-format
#~ msgid "Minimum thermal spoke count: %s."
#~ msgstr "Termisk avlastning ekers bredd:"
#, fuzzy
#~ msgid "Net Class Flag"
#~ msgstr "Nätklassflagga"
#~ msgid "ERC completed.<br><br>"
#~ msgstr "ERC slutförd.<br><br>"
#~ msgid "Violations"
#~ msgstr "Överträdelser"
#~ msgid "Delete Markers"
#~ msgstr "Ta bort markörer"
#~ msgid "Net Class Flag Properties"
#~ msgstr "Nätklassflaggans egenskaper"
#, fuzzy
#~ msgid "Change to Net Class Flag"
#~ msgstr "Ändra till text"
#, fuzzy
#~ msgid "Change existing item to a net class flag"
#~ msgstr "Ändra befintligt objekt till en etikett"
#~ msgid "Highlight on PCB"
#~ msgstr "Markera på PCB"
#~ msgid "Loading Gerber files..."
#~ msgstr "Läser in Gerber-filer..."
#~ msgid ""
#~ "Open Gerber plot file(s) on the current layer. Previous data will be "
#~ "deleted"
#~ msgstr ""
#~ "Öppna Gerber-plotfil(er) på det aktuella lagret. Tidigare data kommer att "
#~ "raderas"
#~ msgid ""
#~ "Open Excellon drill file(s) on the current layer. Previous data will be "
#~ "deleted"
#~ msgstr ""
#~ "Öppna Excellon borrfil (er) på det aktuella lagret. Tidigare data kommer "
#~ "att raderas"
#~ msgid "DRC Control"
#~ msgstr "DRC-kontroll"
#~ msgid "Millimeter"
#~ msgstr "Millimeter"
#~ msgid ""
#~ "The units that are used for a SVG user units.\n"
#~ "Choose Millimeter when you are not sure."
#~ msgstr ""
#~ "Enheterna som används för SVG-användarenheter.\n"
#~ "Välj Millimeter när du är osäker."
#, c-format
#~ msgid ""
#~ "Arc keepout found on an Altium layer (%d) with no KiCad equivalent. It "
#~ "has been moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Båg-keepout hittad på ett Altium-lager (%d) som saknar motsvarighet i "
#~ "KiCad. Den har flyttats till KiCad-lager Eco1_User."
#, c-format
#~ msgid ""
#~ "Track keepout found on an Altium layer (%d) with no KiCad equivalent. It "
#~ "has been moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Spår-keepout hittad på ett Altium-lager (%d) som inte har någon "
#~ "motsvarighet i KiCad. Den har flyttats till KiCad-lagret Eco1_User."
#, c-format
#~ msgid ""
#~ "Track found on an Altium layer (%d) with no KiCad equivalent. It has been "
#~ "moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Spår hittat på ett Altium-lager (%d) som inte har någon motsvarighet i "
#~ "KiCad. Det har flyttats till KiCad-lagret Eco1_User."
#, c-format
#~ msgid ""
#~ "Text found on an Altium layer (%d) with no KiCad equivalent. It has been "
#~ "moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Text hittad på ett Altium-lager (%d) som inte har någon motsvarighet i "
#~ "KiCad. Den har flyttats till KiCad-lagret Eco1_User."
#, c-format
#~ msgid ""
#~ "Fill found on an Altium layer (%d) with no KiCad equivalent. It has been "
#~ "moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Fyllning hittad på ett Altium-lager (%d) som inte har någon motsvarighet "
#~ "i KiCad. Den har flyttats till KiCad-lagret Eco1_User."
#~ msgid "Random direction factor of the cast rays"
#~ msgstr "Slumpmässig riktningsfaktor för kastade strålar"
#~ msgid "sq. mm"
#~ msgstr "mm^2"
#~ msgid "cu. mm"
#~ msgstr "cu. mm"
#~ msgid "sq. mils"
#~ msgstr "mil^2"
#~ msgid "cu. mils"
#~ msgstr "cu. mils"
#~ msgid "sq. in"
#~ msgstr "tum^2"
#~ msgid "cu. in"
#~ msgstr "cu. i"
#~ msgid "the translation for paper size must preserve original spellings"
#~ msgstr "översättningen för pappersstorlek måste bevara originalstavningarna"
#~ msgid "Sheet background color:"
#~ msgstr "Ark bakgrundsfärg:"
#~ msgid "Label requires non-empty text."
#~ msgstr "Etikett kräver icke-tom text."
#~ msgid "Text Size:"
#~ msgstr "Textstorlek:"
#~ msgid "Bold and italic"
#~ msgstr "Fet och kursiv"
#~ msgid "Save changes to schematic before closing?"
#~ msgstr "Spara ändringar i schemat före stängning?"
#~ msgid "Pending install"
#~ msgstr "Väntande installation"
#~ msgid "Pending uninstall"
#~ msgstr "Väntande avinstallation"
#~ msgid "Mirror text"
#~ msgstr "Spegeltext"
#~ msgid "Justification:"
#~ msgstr "Motivering:"
#, c-format
#~ msgid "Update footprint %s from '%s' to '%s'"
#~ msgstr "Uppdatera fotavtryck %s från '%s' till '%s'"
#~ msgid "Footprint can be freely moved and oriented on the canvas."
#~ msgstr "Fotavtrycket kan fritt flyttas och roteras på ytan."
#~ msgid "Unlock footprint"
#~ msgstr "Lås upp fotavtryck"
#~ msgid "Move and Place"
#~ msgstr "Flytta och placera"
#~ msgid "Allow 90 degree rotated placement:"
#~ msgstr "Tillåt 90 graders roterad placering:"
#~ msgid "Allow 180 degree rotated placement:"
#~ msgstr "Tillåt 180 graders roterad placering:"
#~ msgid "Layers setup"
#~ msgstr "Lagerinställning"
#~ msgid "Custom pad shape in zone:"
#~ msgstr "Anpassad padform i zon:"
#~ msgid "Use pad shape"
#~ msgstr "Använd dynform"
#~ msgid "Checking silkscreen for potential soldermask clipping..."
#~ msgstr "Kontrollerar silkscreen för eventuell klippning av lödmask ..."
#, c-format
#~ msgid "Testing %d mask apertures against %d silkscreen features."
#~ msgstr "Testar %d masköppningar mot %d silkscreen-funktioner."
#~ msgid "parent footprint"
#~ msgstr "förälders fotavtryck"
#~ msgid "Items share no relevant layers:"
#~ msgstr "Element delar inga relevanta lager:"
#~ msgid "Draw a leader"
#~ msgstr "Rita en ledare"
#~ msgid "Others"
#~ msgstr "Andra"
#~ msgid ""
#~ "KiCad can use your graphics card to give you a smoother and faster "
#~ "experience. This option is turned off by default since it is not "
#~ "compatible with all computers.\n"
#~ "\n"
#~ "Would you like to try enabling graphics acceleration?\n"
#~ "\n"
#~ "If you'd like to choose later, select Accelerated Graphics in the "
#~ "Preferences menu."
#~ msgstr ""
#~ "KiCad kan använda ditt grafikkort för att ge dig en mjukare och snabbare "
#~ "upplevelse. Det här alternativet är avstängt som standard eftersom det "
#~ "inte är kompatibelt med alla datorer.\n"
#~ "\n"
#~ "Vill du försöka aktivera grafikacceleration?\n"
#~ "\n"
#~ "Om du vill välja senare väljer du Accelerated Graphics i menyn "
#~ "Preferences."
#~ msgid "Enable Graphics Acceleration"
#~ msgstr "Aktivera Grafisk Acceleration"
#~ msgid "&Enable Acceleration"
#~ msgstr "&Aktivera Acceleration"
#~ msgid "&No Thanks"
#~ msgstr "&Nej Tack"
#~ msgid "Notes"
#~ msgstr "Anteckningar"
#~ msgid "Sheet name"
#~ msgstr "Arknamn"
#~ msgid "Sheet file"
#~ msgstr "Arkfil"
#, c-format
#~ msgid ""
#~ "Cannot print '%s'.\n"
#~ "\n"
#~ "Unknown file type."
#~ msgstr ""
#~ "Kan inte skriva ut '%s'.\n"
#~ "\n"
#~ "Okänd filtyp."
#~ msgid "Discard changes"
#~ msgstr "Förkasta Ändringar"
#~ msgid "All downloads finished"
#~ msgstr "Alla nedladdningar färdiga"
#, c-format
#~ msgid "License: %s\n"
#~ msgstr "Licens: %s\n"
#~ msgid "Pick a package on the left panel to view it's description."
#~ msgstr "Välj ett paket i den vänstra panelen för att se dess beskrivning."
#~ msgid "Dl Size"
#~ msgstr "Dl-storlek"
#~ msgid "Comp"
#~ msgstr "Företag"
#~ msgid "Versions"
#~ msgstr "Versioner"
#~ msgid "Print the contents of the file"
#~ msgstr "Skriv ut innehållet i filen"
#, c-format
#~ msgid "Min Width: %s"
#~ msgstr "Min bredd: %s"
#~ msgid "Zcommon = Zeven / 2"
#~ msgstr "Zcommon = Zeven / 2"
#, c-format
#~ msgid "Field name \"%s\" already in use."
#~ msgstr "Fältnamnet \"%s\" används redan."
#~ msgid "Add new pins for alternate body style (DeMorgan) to symbol?"
#~ msgstr ""
#~ "Lägg till nya stift för alternativ kroppsstil (DeMorgan) till symbolen?"
#~ msgid "PI"
#~ msgstr "PI"
#~ msgid ""
#~ "Show or hide the track and via clearance area. If \"New track\" is "
#~ "selected, track clearance area is shown only when creating the track."
#~ msgstr ""
#~ "Visa eller dölj spåret och via spelrummet. Om \"Nytt spår\" är valt visas "
#~ "spårfrigöringsområdet endast när spåret skapas."
#~ msgid "<invalid>"
#~ msgstr "<ogiltigt>"
#~ msgid "Ref."
#~ msgstr "Ref."
#, c-format
#~ msgid "Through hole pad of %s"
#~ msgstr "Genomgående hålkudde på %s"
#~ msgid "Footprint text front"
#~ msgstr "Fotavtryck text fram"
#~ msgid "Footprint text back"
#~ msgstr "Fotavtryck text bak"
#, fuzzy
#~ msgid ""
#~ "### Bridged Tee Attenuator\n"
#~ "__Zin__ desired input impedance in Ω<br>\n"
#~ "__Zout__ desired output impedance<br>\n"
#~ "__Z<sub>0</sub> = Zin = Zout__<br><br>\n"
#~ "\n"
#~ "* __a__ attenuation in dB\n"
#~ "* __L = 10<sup>a/20</sup>__ (the loss)<br><br>\n"
#~ "* ___R1 = Z<sub>0</sub> \\* (L - 1)___\n"
#~ "* ___R2 = Z<sub>0</sub> / (L - 1)___"
#~ msgstr ""
#~ "### Bryggad tee-dämpare:\n"
#~ "__Zin__ önskad ingångsimpedans i & # x2126; <br>\n"
#~ "__Zout__ önskad utgångsimpedans <br>\n"
#~ "__Z <sub> 0 </sub> = Zin = Zout__ <br> <br>\n"
#~ "\n"
#~ "* __a__ dämpning i dB\n"
#~ "* __L = 10 <sup> a / 20 </sup> __ (förlusten) <br> <br>\n"
#~ "* ___R1 = Z <sub> 0 </sub> \\ * (L - 1) ___\n"
#~ "* ___R2 = Z <sub> 0 </sub> / (L - 1) ___"
#, fuzzy
#~ msgid ""
#~ "### PI Attenuator\n"
#~ "__Zin__ desired input impedance in Ω<br>\n"
#~ "__Zout__ desired output impedance<br>\n"
#~ "__Zin = Zout__<br><br>\n"
#~ "\n"
#~ "* __a__ attenuation in dB\n"
#~ "* __L = 10<sup>a/20</sup>__ (the loss)\n"
#~ "* __A = (L + 1) / (L - 1)__<br><br>\n"
#~ "* ___R2 = (L- 1) / 2 \\* √ ( (Zin \\* Zout) / L)___\n"
#~ "* ___R1 = 1 / (A / Zin - 1 / R2)___\n"
#~ "* ___R3 = 1 / (A / Zout - 1 / R2)___"
#~ msgstr ""
#~ "## Pi-dämpare\n"
#~ "__Zin__ önskad ingångsimpedans i & # x2126; <br>\n"
#~ "__Zout__ önskad utgångsimpedans <br>\n"
#~ "__Zin = Zout__ <br> <br>\n"
#~ "\n"
#~ "* __a__ dämpning i dB\n"
#~ "* __L = 10 <sup> a / 20 </sup> __ (förlusten)\n"
#~ "* __A = (L + 1) / (L - 1) __ <br> <br>\n"
#~ "* ___R2 = (L- 1) / 2 \\ * & radic; ((Zin \\ * Zout) / L) ___\n"
#~ "* ___R1 = 1 / (A / Zin - 1 / R2) ___\n"
#~ "* ___R3 = 1 / (A / Zout - 1 / R2) ___"
#~ msgid "Mouse drag behavior:"
#~ msgstr "Musbeteende:"
#~ msgid "Interactive drag"
#~ msgstr "Interaktivt drag"
#, fuzzy
#~ msgid "Toggle 45 Limit"
#~ msgstr "Toggle Last Net Highlight"
#~ msgid "OpenGL"
#~ msgstr "OpenGL"
#~ msgid "Footprint R1 (300K), back side (mirrored), rotated 180.0º"
#~ msgstr "Fotavtryck R1 (300K), baksida (speglad), roterad 180,0º"
#~ msgid "PolyLine"
#~ msgstr "PolyLine"
#~ msgid ""
#~ "The library ID and footprint ID currently assigned. Use “Change "
#~ "Footprint…” to assign a different footprint."
#~ msgstr ""
#~ "Biblioteks-ID och fotavtryck-ID som för närvarande tilldelats. Använd "
#~ "“Ändra fotavtryck ...” för att tilldela ett annat fotavtryck."
#~ msgid "Presets:"
#~ msgstr "Förinställningar:"
#, c-format
#~ msgid ""
#~ "The drawing sheet file name has changed.\n"
#~ "Do you want to use the relative path:\n"
#~ "\"%s\"\n"
#~ "instead of\n"
#~ "\"%s\"?"
#~ msgstr ""
#~ "Filnamnet på ritningsbladsfilen har ändrats.\n"
#~ "Vill du använda den relativa sökvägen:\n"
#~ "\"%s\"\n"
#~ "istället för\n"
#~ "\"%s\"?"
#~ msgid "Drawing sheet file"
#~ msgstr "Ritningsbladsfil"
#~ msgid "Browse..."
#~ msgstr "Bläddra ..."
#~ msgid ""
#~ "Left click (and drag) actions depend on 3 modifier keys:\n"
#~ "Alt, Shift and Ctrl."
#~ msgstr ""
#~ "Vänsterklicka (och dra) åtgärder beror på tre modifieringsnycklar:\n"
#~ "Alt, Skift och Ctrl."
#~ msgid "Toggle selected state of item(s)."
#~ msgstr "Växla valt tillstånd för objekt."
#, fuzzy
#~ msgid "Alt+Shift"
#~ msgstr "Ctrl + Skift"
#~ msgid ""
#~ "Left click (and drag) actions depend on 3 modifier keys:\n"
#~ "Alt, Shift and Cmd."
#~ msgstr ""
#~ "Vänsterklicka (och dra) åtgärder beror på tre modifieringsnycklar:\n"
#~ "Alt, Skift och Cmd."
#, fuzzy
#~ msgid "Cmd+Shift"
#~ msgstr "Ctrl + Skift"
#~ msgid "Nodes"
#~ msgstr "Noder"
#~ msgid "Graphic Shape"
#~ msgstr "Grafisk Form"
#~ msgid "Board Text"
#~ msgstr "Korttext"
#~ msgid "Board Marker"
#~ msgstr "Kortmarkör"
#~ msgid "Aligned Dimension"
#~ msgstr "Inriktad dimension"
#~ msgid "Orthogonal Dimension"
#~ msgstr "Ortogonal Dimension"
#~ msgid "Center Dimension"
#~ msgstr "Mittdimension"
#~ msgid "Schematic Marker"
#~ msgstr "Schematisk markör"
#~ msgid "Graphic Line"
#~ msgstr "Grafisk Linje"
#~ msgid "Schematic Text"
#~ msgstr "Schematisk text"
#~ msgid "Schematic Field"
#~ msgstr "Schematiskt fält"
#~ msgid "Schematic Symbol"
#~ msgstr "Redigera Schematisk Symbol"
#~ msgid "Symbol Text"
#~ msgstr "Symboltext"
#~ msgid "Validate"
#~ msgstr "Bekräfta"
#, c-format
#~ msgid "Remove single pad net %s."
#~ msgstr "Ta bort nätet med enstaka kuddar %s."
#, fuzzy, c-format
#~ msgid "Removed single pad net %s."
#~ msgstr "Ta bort nätet med enstaka kuddar %s."
#~ msgid "Change to isometric perspective"
#~ msgstr "Ändra till isometriskt perspektiv"
#~ msgid "Days"
#~ msgstr "Dagar"
#~ msgid "No editor defined in KiCad. Please choose it."
#~ msgstr "Ingen redigerare definierad i KiCad. Välj det."
#, fuzzy
#~ msgid "No editor defined. Please select one."
#~ msgstr "Ingen redaktör definierad. Välj en"
#~ msgid "Delete nets containing only a single pad"
#~ msgstr "Ta bort nät som bara innehåller en enda pad"
#~ msgid "Generate warnings for pads with no net"
#~ msgstr "Skapa varningar för dynor utan nät"
#~ msgid ""
#~ "Display a warning if a pad in a footprint does not appear in netlist.\n"
#~ "Only pads on a copper layer and having a name are tested."
#~ msgstr ""
#~ "Visa en varning om en pad i ett fotavtryck inte visas i netlistan.\n"
#~ "Endast dynor på ett kopparskikt och med ett namn testas."
#~ msgid ""
#~ "Clear the net name of pads when there is only one pad belonging to this "
#~ "net."
#~ msgstr ""
#~ "Rensa kuddarnas nätnamn när det bara finns en kudde som tillhör detta nät."
#~ msgid "Automatically zoom to fit"
#~ msgstr "Zooma automatiskt för att passa"
#~ msgid "Zoom to fit when changing footprint"
#~ msgstr "Zooma för att passa när du byter fotavtryck"
#~ msgid "Zdiff = Zodd * 2"
#~ msgstr "Zdiff = Zodd * 2"
#~ msgid "Shift+Alt"
#~ msgstr "Skift + Alt"
#~ msgid "Alt+Cmd"
#~ msgstr "Alt + Cmd"
#~ msgid "Info"
#~ msgstr "Info"
#~ msgid "Show Clarify Selection Menu"
#~ msgstr "Visa Menyn Förtydliga Markering"
#~ msgid "Ignore H/V/45 Constraints"
#~ msgstr "Ignorera H/V/45-Begränsningar"
#~ msgid "Do not forget to choose a title for this netlist control page"
#~ msgstr "Glöm inte att välja en titel för denna netlist-kontrollsida"
#, fuzzy, c-format
#~ msgid "Schematic file '%s' is already open."
#~ msgstr "Schematisk fil \"%s\" är redan öppen."
#~ msgid "L&imit graphic lines to H, V and 45 degrees"
#~ msgstr "L & imitera grafiska linjer till H, V och 45 grader"
#, fuzzy
#~ msgid "Limit graphic lines to H, V and 45 degrees"
#~ msgstr "L & imitera grafiska linjer till H, V och 45 grader"
#~ msgid "3D Model Visibility"
#~ msgstr "3D modell synlighet"
#~ msgid "Show 3D through hole models"
#~ msgstr "Visa modeller med 3D-hål"
#~ msgid "Show 3D SMD models"
#~ msgstr "Visa 3D SMD-modeller"
#~ msgid "Show 3D virtual models"
#~ msgstr "Visa virtuella 3D-modeller"
#~ msgid "Toggle Virtual 3D models"
#~ msgstr "Växla virtuella 3D-modeller"
#~ msgid "There are no unreferenced pins in this sheet to remove."
#~ msgstr "Det finns inga stift utan referens i det här arket att ta bort."
#, fuzzy, c-format
#~ msgid "Custom (%s)"
#~ msgstr "Skräddarsydd"
#~ msgid "STEP files (*.stp;*.step)|*.stp;*.step"
#~ msgstr "STEG-filer (*.stp;*.step)|*.stp;*.step"
#, c-format
#~ msgid "The %s layer is mandatory."
#~ msgstr "%s -skiktet är obligatoriskt."
#~ msgid "If you want a courtyard layer for the front side of the board"
#~ msgstr "Om du vill ha ett innergårdslag för brädans framsida"
#~ msgid "If you want a courtyard layer for the back side of the board"
#~ msgstr "Om du vill ha ett innergårdslag för baksidan av brädet"
#~ msgid "If you want a board perimeter layer"
#~ msgstr "Om du vill ha ett brädans omkretsskikt"
#~ msgid "All Files (*.*)|*.*"
#~ msgstr "Alla filer (*.*)|*.*"
#~ msgid "Executable file (*.exe)|*.exe"
#~ msgstr "Körbar fil (*.exe)|*.exe"
#~ msgid "Executable file (*)|*"
#~ msgstr "Körbar fil (*) | *"
#~ msgid "Top layer (*.GTL)|*.GTL;*.gtl|"
#~ msgstr "Toppskikt (*.GTL)|*.GTL; *.gtl|"
#~ msgid "Bottom layer (*.GBL)|*.GBL;*.gbl|"
#~ msgstr "Nedre lagret (*.GBL)|*.GBL;*.gbl|"
#~ msgid "Bottom solder resist (*.GBS)|*.GBS;*.gbs|"
#~ msgstr "Motstånd mot bottenlödning (*.GBS)|*.GBS;*.gbs|"
#~ msgid "Top solder resist (*.GTS)|*.GTS;*.gts|"
#~ msgstr "Motstånd mot topplödning (*.GTS)|*.GTS;*.gts|"
#~ msgid "Bottom overlay (*.GBO)|*.GBO;*.gbo|"
#~ msgstr "Nedre överlägg (*.GBO)|*.GBO;*.gbo|"
#~ msgid "Top overlay (*.GTO)|*.GTO;*.gto|"
#~ msgstr "Överlagring (*.GTO)|*.GTO;*.gto|"
#~ msgid "Bottom paste (*.GBP)|*.GBP;*.gbp|"
#~ msgstr "Nedre klistra in (*.GBP)|*.GBP;*.gbp|"
#~ msgid "Top paste (*.GTP)|*.GTP;*.gtp|"
#~ msgstr "Topplim (*.GTP)|*.GTP;*.gtp|"
#~ msgid "Keep-out layer (*.GKO)|*.GKO;*.gko|"
#~ msgstr "Keep-out-lager (*.GKO)|*.GKO;*.Gko|"
#~ msgid "Mechanical layers (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|"
#~ msgstr "Mekaniska lager (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|"
#~ msgid "Top Pad Master (*.GPT)|*.GPT;*.gpt|"
#~ msgstr "Top Pad Master (*.GPT)|*.GPT;*.gpt|"
#~ msgid "Bottom Pad Master (*.GPB)|*.GPB;*.gpb|"
#~ msgstr "Bottom Pad Master (*.GPB)|*.GPB;*.gpb|"
#, fuzzy
#~ msgid "Background top:"
#~ msgstr "Bakgrund"
#, fuzzy
#~ msgid "Background bottom:"
#~ msgstr "Bakgrunds Färg, Botten"
#, fuzzy
#~ msgid "Load Colors from Board Stackup"
#~ msgstr "Hämta färger från fysisk stackup"
#~ msgid "Doc Files"
#~ msgstr "Doc-filer"
#, fuzzy, c-format
#~ msgid "Doc File '%s' not found"
#~ msgstr "Dokumentfilen \"%s\" hittades inte"
#~ msgid "Text Editor"
#~ msgstr "Textredigerare"
#, c-format
#~ msgid "Setting schematic symbol '%s %s' library identifier to '%s'. "
#~ msgstr ""
#~ "Ställer in schematisk symbol '%s %s' biblioteksidentifierare till '%s'. "
#, c-format
#~ msgid "File \"%s\" not found"
#~ msgstr "Filen %s hittades inte"
#~ msgid "Bad or missing parameters!"
#~ msgstr "Dåliga eller saknade parametrar!"
#~ msgid "Available materials:"
#~ msgstr "Tillgängliga material:"
#~ msgid "Dielectric Materials"
#~ msgstr "Dielektriska material"
#~ msgid "Outline smooth:"
#~ msgstr "Kontur smidig:"
#~ msgid "HatchBorder pattern"
#~ msgstr "HatchBorder-mönster"
#~ msgid "Smooth amount:"
#~ msgstr "Jämn mängd:"
#~ msgid "Error: Corner size not a number."
#~ msgstr "Fel: Hörnstorlek inte ett nummer."
#, c-format
#~ msgid "Checking %s; silk clearance: %s."
#~ msgstr "Kontroll %s; sidenavstånd: %s."
#, c-format
#~ msgid "Checking %s; edge clearance: %s."
#~ msgstr "Kontroll %s; kantavstånd: %s."
#~ msgid "Shape Option"
#~ msgstr "Formalternativ"
#~ msgid "Read descr shape file"
#~ msgstr "Läs beskrivningsformfilen"
#, c-format
#~ msgid "Overridden by %s; connection type: %s."
#~ msgstr "Överstyrd av %s; anslutningstyp: %s."
#, c-format
#~ msgid "%s not present on layer %s. No clearance defined."
#~ msgstr "%s finns inte på lager %s. Inget avstånd definierat."
#~ msgid "Convert to Polygon"
#~ msgstr "Konvertera till polygon"
#~ msgid "Convert to Lines"
#~ msgstr "Konvertera till linjer"
#~ msgid "Convert to Arc"
#~ msgstr "Konvertera till Arc"
#~ msgid "Converts selected line segment to an arc"
#~ msgstr "Konverterar valt linjesegment till en båge"
#~ msgid "Convert to Tracks"
#~ msgstr "Konvertera till spår"
#~ msgid "Converts selected graphic lines to tracks"
#~ msgstr "Konverterar valda grafiska rader till spår"
#~ msgid "Wireframe Zones"
#~ msgstr "Trådramzoner"
#~ msgid "Sketch Zones"
#~ msgstr "Skisszoner"
#~ msgid "Show solid areas of zones in outline mode"
#~ msgstr "Visa fasta zoner i konturläge"
#, c-format
#~ msgid "Unable to create report file '%s'"
#~ msgstr "Det gick inte att skapa rapportfilen '%s'"
#, fuzzy
#~ msgid ""
#~ "Line width may not be 0 for shapes other than filled with body outline "
#~ "color."
#~ msgstr "Linjebredden kanske inte är 0 för ofyllda former."
#~ msgid "Run command:"
#~ msgstr "Kör kommandon:"
#~ msgid "Info messages:"
#~ msgstr "Infomeddelanden:"
#~ msgid "Error messages:"
#~ msgstr "Felmeddelande:"
#, c-format
#~ msgid "Pin has non-existent ownerindex %d."
#~ msgstr "Stift har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Label has non-existent ownerindex %d."
#~ msgstr "Etikett har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Bezier has non-existent ownerindex %d."
#~ msgstr "Bezier har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Polyline has non-existent ownerindex %d."
#~ msgstr "Polyline har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Polygon has non-existent ownerindex %d."
#~ msgstr "Polygon har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Rounded rectangle has non-existent ownerindex %d."
#~ msgstr "Avrundad rektangel har icke-existerande ägarindex %d."
#~ msgid "Arc drawing is not possible for now on schematic."
#~ msgstr "Bågritning är inte möjligt på scheman just nu."
#, c-format
#~ msgid "Arc has non-existent ownerindex %d."
#~ msgstr "Båge har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Line has non-existent ownerindex %d."
#~ msgstr "Linje har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Rectangle has non-existent ownerindex %d."
#~ msgstr "Rektangel har icke-existerande ägarindex %d."
#, c-format
#~ msgid "Designator has non-existent ownerindex %d."
#~ msgstr "Beteckning har icke-existerande ägarindex %d."
#~ msgid "You need to select the simulation settings first."
#~ msgstr "Du måste välja simuleringsinställningar först."
#~ msgid "There was an error while opening the workbook file"
#~ msgstr "Det uppstod ett fel när arbetsboksfilen öppnades"
#~ msgid "There was an error while saving the workbook file"
#~ msgstr "Ett fel uppstod när arbetsboksfilen skulle sparas"
#~ msgid "Simulator is running. Try later"
#~ msgstr "Simulatorn kör. Försök senare"
#, c-format
#~ msgid "Unable to create \"%s\""
#~ msgstr "Det gick inte att skapa \"%s\""
#~ msgid "Hide nets matching:"
#~ msgstr "Dölj nät som matchar:"
#~ msgid ""
#~ "Pattern to filter net names in filtered list.\n"
#~ "Net names matching this pattern are not displayed."
#~ msgstr ""
#~ "Mönster för att filtrera nätnamn i filtrerad lista.\n"
#~ "Nätnamn som matchar detta mönster visas inte."
#~ msgid "Show nets matching:"
#~ msgstr "Visa matchande nät:"
#~ msgid "*"
#~ msgstr "*"
#~ msgid "Show all nets"
#~ msgstr "Visa alla nät"
#, c-format
#~ msgid "Unable to create report file '%s'<br>"
#~ msgstr "Det gick inte att skapa rapportfilen %s'<br>"
#, c-format
#~ msgid "Unable to create %s"
#~ msgstr "Det gick inte att skapa %s"
#, fuzzy, c-format
#~ msgid "Unable to create '%s'."
#~ msgstr "Det gick inte att skapa %s"
#, c-format
#~ msgid "** Unable to create %s **\n"
#~ msgstr "** Det gick inte att skapa %s **\n"
#, c-format
#~ msgid "Report file %s created\n"
#~ msgstr "Rapportfil %s skapad\n"
#, fuzzy, c-format
#~ msgid "Unable to create job file '%s'."
#~ msgstr "Det gick inte att skapa jobbfilen \"%s\""
#, c-format
#~ msgid ""
#~ "Polygon has only %d point extracted from %ld vertices. At least 2 points "
#~ "are required."
#~ msgstr ""
#~ "Polygon har endast %d poäng extraherats från %ld hörn. Minst 2 poäng "
#~ "krävs."
#, c-format
#~ msgid ""
#~ "ShapeBasedRegion has only %d point extracted from %ld vertices. At least "
#~ "2 points are required."
#~ msgstr ""
#~ "ShapeBasedRegion har endast %d poäng extraherats från %ld hörn. Minst 2 "
#~ "poäng krävs."
#~ msgid "Fill zone(s)"
#~ msgstr "Fyll zon (er)"
#~ msgid "Fill All"
#~ msgstr "Fyll alla"
#~ msgid "Fill all zones"
#~ msgstr "Fyll alla zoner"
#~ msgid "Unfill"
#~ msgstr "Uppfylla"
#~ msgid "Unfill All"
#~ msgstr "Uppfylla alla"
#~ msgid "Raytracing Options"
#~ msgstr "Raytracing-alternativ"
#~ msgid "Choose Colors"
#~ msgstr "Välj Färger"
#~ msgid "Background Top Color..."
#~ msgstr "Bakgrundsfärg, topp..."
#~ msgid "Background Bottom Color..."
#~ msgstr "Bakgrundsfärg, botten..."
#~ msgid "Silkscreen Color..."
#~ msgstr "Silkscreen Färg..."
#~ msgid "Solder Mask Color..."
#~ msgstr "Lödmask Färg ..."
#~ msgid "Solder Paste Color..."
#~ msgstr "Lödpasta Färg ..."
#~ msgid "Copper/Surface Finish Color..."
#~ msgstr "Färg för Finish för Koppar/Yta..."
#~ msgid "Board Body Color..."
#~ msgstr "Bakgrundsfärg, mönsterkort..."
#~ msgid "Set display options, and some layers visibility"
#~ msgstr "Ange visningsalternativ, och vissa lager synlighet"
#~ msgid "OpenGL Render Options"
#~ msgstr "OpenGL Renderings Alternativ"
#~ msgid "Post-processing"
#~ msgstr "Efter-behandling"
#, fuzzy
#~ msgid "1:"
#~ msgstr "1:"
#, fuzzy
#~ msgid "5:"
#~ msgstr "5:"
#, fuzzy
#~ msgid "2:"
#~ msgstr "2:"
#, fuzzy
#~ msgid "6:"
#~ msgstr "6:"
#, fuzzy
#~ msgid "3:"
#~ msgstr "3:"
#, fuzzy
#~ msgid "7:"
#~ msgstr "7:"
#, fuzzy
#~ msgid "4:"
#~ msgstr "4:"
#~ msgid "8:"
#~ msgstr "8:"
#~ msgid "Reset to defaults"
#~ msgstr "Återställ till standardvärden"
#~ msgid "3D Display Options"
#~ msgstr "3D Visnings Alternativ"
#~ msgid "Background Color, Top"
#~ msgstr "Bakgrunds Färg, Topp"
#~ msgid "Copper Color"
#~ msgstr "Koppar Färglager"
#~ msgid "Solder Paste Color"
#~ msgstr "Lödpasta Färg"
#~ msgid "Use All Properties"
#~ msgstr "Använd Alla Egenskaper"
#~ msgid "Use Diffuse Only"
#~ msgstr "Använd endast diffus"
#~ msgid "CAD Color Style"
#~ msgstr "CAD-färgstil"
#~ msgid "Procedural Textures"
#~ msgstr "Procedurella strukturer"
#~ msgid "Apply procedural textures to materials (slow)"
#~ msgstr "Applicera procedurstrukturer på material (långsam)"
#~ msgid "Add Floor"
#~ msgstr "Lägg Till Fält"
#~ msgid "Adds a floor plane below the board (slow)"
#~ msgstr "Lägger till ett golvplan under brädet (långsam)"
#~ msgid "Refractions"
#~ msgstr "Brytningar"
#~ msgid "Render materials with refractive properties on final render (slow)"
#~ msgstr ""
#~ "Gör material med brytningsegenskaper vid slutlig återgivning (långsam)"
#~ msgid "Reflections"
#~ msgstr "Avspeglingar"
#~ msgid "Render materials with reflective properties on final render (slow)"
#~ msgstr ""
#~ "Gör material med reflekterande egenskaper vid slutlig återgivning "
#~ "(långsam)"
#~ msgid "Render with improved quality on final render (slow)"
#~ msgstr "Render med förbättrad kvalitet vid slutlig rendering (långsam)"
#, c-format
#~ msgid "You do not have write permissions to folder \"%s\"."
#~ msgstr "Du har inte skrivbehörighet till mappen \"%s\"."
#, c-format
#~ msgid ""
#~ "You do not have write permissions to save file \"%s\" to folder \"%s\"."
#~ msgstr ""
#~ "Du har inte skrivbehörighet för att spara filen \"%s\" i mappen \"%s\"."
#, c-format
#~ msgid "You do not have write permissions to save file \"%s\"."
#~ msgstr "Du har inte skrivbehörighet för att spara filen \"%s\"."
#, c-format
#~ msgid "Cannot create global library table path \"%s\"."
#~ msgstr ""
#~ "Det går inte att skapa den globala sökvägen för bibliotekstabellen \"%s\"."
#, c-format
#~ msgid "Cannot copy file \"%s\"."
#~ msgstr "Det går inte att kopiera filen \"%s\"."
#~ msgid "Illegal character found in revision"
#~ msgstr "Olaglig karaktär hittades vid revision"
#, c-format
#~ msgid "%s is already running. Continue?"
#~ msgstr "%s körs redan. Fortsätta?"
#, c-format
#~ msgid "Archive file \"%s\": Failed!\n"
#~ msgstr "Arkivera filen \"%s\": Misslyckades!\n"
#, c-format
#~ msgid ""
#~ "Library \"%s\" has duplicate entry name \"%s\".\n"
#~ "This may cause some unexpected behavior when loading components into a "
#~ "schematic."
#~ msgstr ""
#~ "Biblioteket \"%s\" har duplicerat postnamn \"%s\".\n"
#~ "Detta kan orsaka oväntat beteende när komponenter laddas i ett schema."
#, c-format
#~ msgid ""
#~ "Symbol library \"%s\" failed to load. Error:\n"
#~ " %s"
#~ msgstr ""
#~ "Symbolbiblioteket \"%s\" kunde inte laddas. Fel:\n"
#~ " %s"
#, c-format
#~ msgid ""
#~ "Symbol library \"%s\" failed to load.\n"
#~ "Error: %s"
#~ msgstr ""
#~ "Symbolbiblioteket \"%s\" kunde inte laddas.\n"
#~ "Fel: %s"
#, c-format
#~ msgid ""
#~ "Error occurred loading symbol %s from library %s.\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "Ett fel inträffade vid inläsning av symbol %s från biblioteket %s.\n"
#~ "\n"
#~ "%s"
#, c-format
#~ msgid ""
#~ "Error occurred loading global symbol library table.\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "Ett fel inträffade vid inläsning av global symbolbibliotekstabell.\n"
#~ "\n"
#~ "%s"
#~ msgid "Common to all &units in component"
#~ msgstr "Gemensamt för alla & enheter i komponent"
#~ msgid ""
#~ "Margin (in 0.001 inches) between a pin name position and the component "
#~ "body.\n"
#~ "A value from 10 to 40 is usually good."
#~ msgstr ""
#~ "Marginal (i 0,001 tum) mellan en stiftnamnsposition och "
#~ "komponentkroppen.\n"
#~ "Ett värde från 10 till 40 är vanligtvis bra."
#~ msgid "Alternate pin assignments are not available for DeMorgan components."
#~ msgstr ""
#~ "Alternativa stifttilldelningar är inte tillgängliga för DeMorgan-"
#~ "komponenter."
#, c-format
#~ msgid "Plot: \"%s\" OK.\n"
#~ msgstr "Tomt: \"%s\" OK.\n"
#, c-format
#~ msgid "Unable to create file \"%s\".\n"
#~ msgstr "Det gick inte att skapa filen \"%s\".\n"
#, c-format
#~ msgid "Cannot create file \"%s\".\n"
#~ msgstr "Det går inte att skapa filen \"%s\".\n"
#, c-format
#~ msgid "Library \"%s\" not found."
#~ msgstr "Biblioteket \"%s\" hittades inte."
#, c-format
#~ msgid "Failed to rename temporary file \"%s\""
#~ msgstr "Det gick inte att byta namn på temporär fil \"%s\""
#~ msgid ""
#~ "The entire schematic could not be loaded. Errors occurred attempting to "
#~ "load \n"
#~ "hierarchical sheet schematics."
#~ msgstr ""
#~ "Hela schemat kunde inte laddas. Fel uppstod när du försökte ladda\n"
#~ "hierarkiska scheman."
#~ msgid "Append Schematic"
#~ msgstr "Lägg till schemat"
#, c-format
#~ msgid "Failed to save symbol library file \"%s\""
#~ msgstr "Det gick inte att skapa symbolbiblioteksfil \"%s\""
#, c-format
#~ msgid "Save changes to \"%s\" before closing?"
#~ msgstr "Spara ändringar i '%s' innan stängning?"
#~ msgid "[no file]"
#~ msgstr "[ingen fil]"
#, c-format
#~ msgid ""
#~ "Invalid symbol name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt symbolnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid library identifier in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltig biblioteksidentifierare i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid symbol extends name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltig symbol förlänger namnet i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid symbol unit name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt symbolenhetsnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid symbol unit name prefix %s in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt prefix för symbolenhetsnamn %s i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "offset: %d"
#, c-format
#~ msgid ""
#~ "Invalid symbol unit number %s in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt symbolenhetsnummer %s in\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, fuzzy, c-format
#~ msgid ""
#~ "Invalid symbol names definition in\n"
#~ "file: '%s'\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltig definition av symbolnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, fuzzy, c-format
#~ msgid ""
#~ "Invalid property name in\n"
#~ "file: '%s'\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt fastighetsnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, fuzzy, c-format
#~ msgid ""
#~ "Empty property name in\n"
#~ "file: '%s'\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Tomt fastighetsnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, fuzzy, c-format
#~ msgid ""
#~ "Invalid property value in\n"
#~ "file: '%s'\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt fastighetsvärde i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid pin name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt stiftnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid pin number in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt PIN-nummer i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid alternate pin name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt alternativt stiftnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid text string in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltig textsträng i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid property name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt fastighetsnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Empty property name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Tomt fastighetsnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid property value in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt fastighetsvärde i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Empty sheet pin name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Tomt arknamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid symbol library name in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt symbolbiblioteksnamn i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "Invalid symbol library ID in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt symbolbiblioteks-ID i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid "symbol library \"%s\" already exists, cannot create a new library"
#~ msgstr ""
#~ "symbolbiblioteket \"%s\" finns redan, kan inte skapa ett nytt bibliotek"
#, c-format
#~ msgid "user does not have permission to read library document file \"%s\""
#~ msgstr ""
#~ "användaren har inte behörighet att läsa biblioteksdokumentfilen \"%s\""
#, c-format
#~ msgid "Error occurred loading schematic file \"%s\"."
#~ msgstr "Fel inträffade vid inläsning av schematisk fil \"%s\"."
#, c-format
#~ msgid "Library \"%s\" already exists"
#~ msgstr "Biblioteket \"%s\" finns redan"
#, c-format
#~ msgid "Error occurred loading symbol \"%s\" from library \"%s\"."
#~ msgstr ""
#~ "Fel inträffade vid inläsning av symbolen \"%s\" från biblioteket \"%s\"."
#, c-format
#~ msgid "Symbol \"%s\" already exists in library \"%s\""
#~ msgstr "Symbolen %s finns redan i biblioteket %s"
#, c-format
#~ msgid "Symbol \"%s\" already exists in library \"%s\"."
#~ msgstr "Symbolen \"%s\" finns redan i biblioteket \"%s\"."
#, c-format
#~ msgid "Write permissions are required to save library \"%s\"."
#~ msgstr "Skrivbehörigheter krävs för att spara biblioteket \"%s\"."
#, fuzzy
#~ msgid "Errors were encountered loading symbols:"
#~ msgstr "Fel uppstod vid laddning av fotavtryck:"
#, c-format
#~ msgid "Cannot find library \"%s\" in the Symbol Library Table (%s)"
#~ msgstr "Kan inte hitta biblioteket \"%s\" i symbolbibliotektabellen (%s)"
#, c-format
#~ msgid "Cannot load symbol \"%s\" from library \"%s\" (%s)"
#~ msgstr "Det går inte att ladda symbolen \"%s\" från biblioteket \"%s\" (%s)"
#, c-format
#~ msgid "An error \"%s\" occurred saving symbol \"%s\" to library \"%s\""
#~ msgstr ""
#~ "Ett fel \"%s\" inträffade när symbolen \"%s\" sparades i biblioteket "
#~ "\"%s\""
#, c-format
#~ msgid "Cannot create file \"%s\""
#~ msgstr "Det går inte att skapa filen \"%s\""
#, c-format
#~ msgid "Source file \"%s\" is not available"
#~ msgstr "Källfilen \"%s\" är inte tillgänglig"
#, fuzzy, c-format
#~ msgid "Cannot write to folder '%s'."
#~ msgstr "Kan inte skriva till mappen \"%s\"."
#, fuzzy
#~ msgid "Make sure you have write permissions and try again."
#~ msgstr ""
#~ "Katalogen \"%s\" kunde inte skapas.\n"
#~ "\n"
#~ "Se till att du har skrivbehörighet och försök igen."
#, c-format
#~ msgid "\"%s\" already exists."
#~ msgstr "\"%s\" finns redan."
#, c-format
#~ msgid ""
#~ "Directory \"%s\" could not be created.\n"
#~ "\n"
#~ "Please make sure you have write permissions and try again."
#~ msgstr ""
#~ "Katalogen \"%s\" kunde inte skapas.\n"
#~ "\n"
#~ "Se till att du har skrivbehörighet och försök igen."
#, c-format
#~ msgid "Cannot write to folder \"%s\"."
#~ msgstr "Kan inte skriva till mappen \"%s\"."
#~ msgid "Please check your access permissions to this folder and try again."
#~ msgstr "Kontrollera dina behörigheter till den här mappen och försök igen."
#, c-format
#~ msgid "Error when loading file \"%s\""
#~ msgstr "Fel vid inläsning av fil \"%s\""
#~ msgid "Select dielectric layer to add to board stack up."
#~ msgstr "Välj dielektriskt lager för att lägga till i kartongstapeln."
#~ msgid "Dielectric Layers List"
#~ msgstr "Lista över dielektriska lager"
#~ msgid "Select dielectric layer to remove from board stack up."
#~ msgstr "Välj dielektriskt lager för att ta bort från kartong."
#~ msgid "Dielectric Layers"
#~ msgstr "Dielektriska lager"
#, c-format
#~ msgid "Unable to create file \"%s\""
#~ msgstr "Det gick inte att skapa filen \"%s\""
#~ msgid "Drill and plot origin"
#~ msgstr "Borr och plot ursprung"
#~ msgid "Tolerance:"
#~ msgstr "Tolerans:"
#, c-format
#~ msgid "Unable to create file \"%s\"."
#~ msgstr "Det gick inte att skapa filen \"%s\"."
#, c-format
#~ msgid "\"%s\" not found"
#~ msgstr "\"%s\" hittades inte"
#, c-format
#~ msgid "\"%s\" found"
#~ msgstr "\"%s\" hittades"
#, c-format
#~ msgid "File \"%s\" not found."
#~ msgstr "Filen %s fanns ej."
#, c-format
#~ msgid ""
#~ "Error occurred loading global footprint library table:\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "Fel inträffade vid inläsning av globalt tabell för fotavtrycksbibliotek:\n"
#~ "\n"
#~ "%s"
#, c-format
#~ msgid "Plot file \"%s\" created."
#~ msgstr "Plotfilen \"%s\" skapades."
#~ msgid "Select user defined layer to add to board layer set"
#~ msgstr ""
#~ "Välj användardefinierat lager som du vill lägga till i "
#~ "kortlageruppsättningen"
#, c-format
#~ msgid "Could not create file \"%s\"."
#~ msgstr "Det gick inte att skapa filen \"%s\"."
#, c-format
#~ msgid "Unable to create \"%s\"."
#~ msgstr "Det gick inte att skapa \"%s\"."
#, c-format
#~ msgid "No access rights to write to file \"%s\""
#~ msgstr "Inga åtkomsträttigheter att skriva till filen \"%s\""
#, fuzzy, c-format
#~ msgid "No access rights to write to file '%s'."
#~ msgstr "Inga åtkomsträttigheter att skriva till filen \"%s\""
#, fuzzy, c-format
#~ msgid "%s%s [from %s.%s]"
#~ msgstr "%s [från %s. %s]"
#, c-format
#~ msgid "Unable to create or write file \"%s\""
#~ msgstr "Det går inte att skapa eller skriva filen \"%s\""
#, c-format
#~ msgid ""
#~ "Polygon on Altium layer %d has no KiCad equivalent. Ignore it instead"
#~ msgstr ""
#~ "Polygon på Altium-lagret %d har ingen KiCad-motsvarighet. Ignorera det "
#~ "istället"
#, c-format
#~ msgid ""
#~ "Arc on Altium layer %d has no KiCad equivalent. Put it on Eco1_User "
#~ "instead"
#~ msgstr ""
#~ "Arc on Altium-lagret %d har ingen KiCad-motsvarighet. Sätt det istället "
#~ "på Eco1_User"
#, c-format
#~ msgid ""
#~ "Track on Altium layer %d has no KiCad equivalent. Put it on Eco1_User "
#~ "instead"
#~ msgstr ""
#~ "Spår på Altium-lager %d har ingen KiCad-motsvarighet. Sätt det istället "
#~ "på Eco1_User"
#, c-format
#~ msgid "footprint library path \"%s\" does not exist"
#~ msgstr "sökväg \"%s\" för fotavtryck finns inte"
#, c-format
#~ msgid "unknown token \"%s\""
#~ msgstr "okänd token \"%s\""
#, c-format
#~ msgid "Library \"%s\" is read only"
#~ msgstr "Biblioteket \"%s\" är skrivskyddat"
#, c-format
#~ msgid "user does not have permission to delete directory \"%s\""
#~ msgstr "användaren har inte behörighet att radera katalogen \"%s\""
#, c-format
#~ msgid "library directory \"%s\" has unexpected sub-directories"
#~ msgstr "bibliotekskatalogen %s har oväntade underkataloger"
#, c-format
#~ msgid "unexpected file \"%s\" was found in library path \"%s\""
#~ msgstr "oväntad fil \"%s\" hittades i bibliotekssökvägen \"%s\""
#, c-format
#~ msgid "footprint library \"%s\" cannot be deleted"
#~ msgstr "fotavtrycksbiblioteket \"%s\" kan inte tas bort"
#, c-format
#~ msgid "No write permissions to delete file \"%s\""
#~ msgstr "Inga skrivbehörigheter för att radera filen \"%s\""
#, c-format
#~ msgid "User does not have permission to delete directory \"%s\"."
#~ msgstr "Användaren har inte behörighet att radera katalogen \"%s\"."
#, c-format
#~ msgid ""
#~ "Invalid net ID in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "Ogiltigt nät-ID i\n"
#~ "fil: \"%s\"\n"
#~ "rad: %d\n"
#~ "förskjutning: %d"
#, c-format
#~ msgid ""
#~ "invalid float number in file: \"%s\"\n"
#~ "line: %d, offset: %d"
#~ msgstr ""
#~ "ogiltigt flottörnummer i filen: \"%s\"\n"
#~ "rad: %d, förskjutning: %d"
#, c-format
#~ msgid ""
#~ "missing float number in file: \"%s\"\n"
#~ "line: %d, offset: %d"
#~ msgstr ""
#~ "saknas flottörnummer i filen: \"%s\"\n"
#~ "rad: %d, förskjutning: %d"
#~ msgid "Only through vias are allowed on 2 layer boards."
#~ msgstr "Endast genom vias är tillåtna på två lagerbrädor."
#~ msgid ""
#~ "Microvias can only be placed between the outer layers (F.Cu/B.Cu) and the "
#~ "ones directly adjacent to them."
#~ msgstr ""
#~ "Microvias kan endast placeras mellan de yttre skikten (F.Cu/B.Cu) och de "
#~ "som ligger direkt intill dem."
#, c-format
#~ msgid "Page layout description file \"%s\" not found."
#~ msgstr "Sidlayoutbeskrivningsfilen \"%s\" hittades inte."
#~ msgid "Select Page Layout Description File"
#~ msgstr "Välj Beskrivning av sidlayoutfil"
#~ msgid "Page layout description file"
#~ msgstr "Sidlayoutbeskrivningsfil"
#~ msgid "Subpixel Antialiasing (High Quality)"
#~ msgstr "Antialiasing av subpixel (hög kvalitet)"
#~ msgid "Subpixel Antialiasing (Ultra Quality)"
#~ msgstr "Antialiasing av subpixel (Ultra Quality)"
#~ msgid "Supersampling (2x)"
#~ msgstr "Supersampling (2x)"
#~ msgid "Supersampling (4x)"
#~ msgstr "Supersampling (4x)"
#~ msgid "Balanced Antialiasing"
#~ msgstr "Balanserad antialiasing"
#~ msgid "Error writing page layout design file"
#~ msgstr "Fel vid skrivning av designfilen för sidlayout"
#~ msgid "Page layout design files"
#~ msgstr "Designfiler för sidlayout"
#, c-format
#~ msgid "Change \"%s\" link from \"%s\" to \"%s\"?"
#~ msgstr "Ändra länken \"%s\" från \"%s\" till \"%s\"?"
#, c-format
#~ msgid "Error loading schematic file \"%s\""
#~ msgstr "Fel vid inläsning av schematisk fil \"%s\""
#, c-format
#~ msgid "%s, %s, or %s"
#~ msgstr "%s, %s eller %s"
#, c-format
#~ msgid "%s, %s, %s, or %s"
#~ msgstr "%s, %s, %s eller %s"
#~ msgid "Start the simulation by clicking the Run Simulation button"
#~ msgstr "Starta simuleringen genom att klicka på knappen Kör simulering"
#~ msgid "Visibles"
#~ msgstr "Synliga"
#~ msgid "Plugin Type"
#~ msgstr "Plugin-typ"
#~ msgid "Template path:"
#~ msgstr "Mallväg:"
#, c-format
#~ msgid "Failed to delete '%s'"
#~ msgstr "Det gick inte att ta bort '%s'"
#~ msgid "Delete Directory"
#~ msgstr "Ta bort katalog"
#~ msgid "Delete File"
#~ msgstr "Radera fil"
#~ msgid "Delete Multiple Items"
#~ msgstr "Ta bort flera objekt"
#~ msgid "Template Error"
#~ msgstr "Mallfel"
#~ msgid "Print Page Layout"
#~ msgstr "Skriv ut sidlayout"
#~ msgid "An error occurred attempting to print the page layout."
#~ msgstr "Ett fel inträffade när du försökte skriva ut sidlayouten."
#~ msgid "Page Layout Description File"
#~ msgstr "Sidlayout Beskrivningsfil"
#~ msgid "The current page layout has been modified. Save changes?"
#~ msgstr "Den aktuella sidlayouten har ändrats. Spara ändringar?"
#~ msgid "The current page layout has been modified. Save changes?"
#~ msgstr "Den aktuella sidlayouten har ändrats. Spara ändringar?"
#~ msgid "New page layout file is unsaved"
#~ msgstr "Ny sidlayoutfil är inte sparad"
#~ msgid "Page layout changes are unsaved"
#~ msgstr "Ändringar av sidlayout är inte sparade"
#~ msgid "Thermal clearance:"
#~ msgstr "Värmeavstånd:"
#~ msgid "&Run"
#~ msgstr "Kör"
#~ msgid "Scripting Test Window"
#~ msgstr "Testfönster för skript"
#~ msgid "Thermal Width"
#~ msgstr "Termisk bredd"
#~ msgid "Thermal Gap"
#~ msgstr "Termiskt gap"
#~ msgid "Thermal Clearance"
#~ msgstr "Värmeutrymme"
#~ msgid "Thermal Spoke Width"
#~ msgstr "Termisk ekers bredd"
#, c-format
#~ msgid ""
#~ "Html or pdf help file \n"
#~ "%s\n"
#~ "or\n"
#~ "%s could not be found."
#~ msgstr ""
#~ "HTML- eller pdf-hjälpfil\n"
#~ "%s\n"
#~ "eller\n"
#~ "%s kunde inte hittas."
#~ msgid "Reset, but keep order of multi-unit parts"
#~ msgstr "Återställ men håll ordning på delar med flera enheter"
#~ msgid "DC source:"
#~ msgstr "DC-källa:"
#~ msgid "Vertical up"
#~ msgstr "Vertikalt uppåt"
#~ msgid "Horizontal right"
#~ msgstr "Horisontell höger"
#~ msgid "Vertical down"
#~ msgstr "Vertikalt ner"
#~ msgid "Welcome!"
#~ msgstr "Välkommen!"
#~ msgid "Close Simulation"
#~ msgstr "Stäng simulering"
#~ msgid "Errors reported by Eeschema:\n"
#~ msgstr "Fel rapporterade av Eeschema:\n"
#~ msgid ""
#~ "\n"
#~ "Annotation not performed!\n"
#~ msgstr ""
#~ "\n"
#~ "Annotation ej utförd!\n"
#~ msgid ""
#~ "\n"
#~ "The schematic will be updated."
#~ msgstr ""
#~ "\n"
#~ "Schemat kommer att uppdateras."
#~ msgid ""
#~ "\n"
#~ "The schematic will not be updated."
#~ msgstr ""
#~ "\n"
#~ "Schemat kommer inte att uppdateras."
#~ msgid ""
#~ "\n"
#~ "Reannotate failed!\n"
#~ msgstr ""
#~ "\n"
#~ "Reannotate misslyckades!\n"
#~ msgid "Update schematic"
#~ msgstr "Uppdatera schemat"
#~ msgid "Print (or not) the edges layer on others layers"
#~ msgstr "Skriv ut (eller inte) kantskiktet på andra lager"
#~ msgid "All layers in a single file"
#~ msgstr "Alla lager i en enda fil"
#~ msgid "Pagination"
#~ msgstr "Paginering"
#~ msgid "Enable hotkey move commands and Auto Placement"
#~ msgstr "Aktivera snabbtangentkommandon och automatisk placering"
#~ msgid "Disable hotkey move commands and Auto Placement"
#~ msgstr "Inaktivera kommandon för snabbtangenter och automatisk placering"
#~ msgid "Exclude PCB edge layer from other layers"
#~ msgstr "Uteslut PCB-kantlager från andra lager"
#~ msgid "All layers on single page"
#~ msgstr "Alla lager på en sida"
#~ msgid "Exclude PCB edge layer"
#~ msgstr "Exkludera PCB-kantlager"
#~ msgid "Exclude contents of Edges_Pcb layer from all other layers"
#~ msgstr "Uteslut innehållet i Edges_Pcb-lagret från alla andra lager"
#~ msgid "locked"
#~ msgstr "låst"
#, fuzzy
#~ msgid "Eeschema Schematic Editor"
#~ msgstr "Byt till schematisk redigerare"
#, fuzzy
#~ msgid "PcbNew PCB Layout"
#~ msgstr "Gerber Layout"
#, fuzzy
#~ msgid "PcbNew 3D Viewer"
#~ msgstr "3D-visare"
#, fuzzy
#~ msgid "Eeschema (Standalone)"
#~ msgstr "Öppna eeschema-manualen"
#, fuzzy
#~ msgid "Electronic schematic capture"
#~ msgstr "Altium schematiska filer"
#, fuzzy
#~ msgid "KiCad electronic schematic design (standalone)"
#~ msgstr "KiCad äldre schematiska filer"
#, fuzzy
#~ msgid "Pcbnew (Standalone)"
#~ msgstr "Öppna pcbnew-manualen"
#, fuzzy
#~ msgid "PCB layout"
#~ msgstr "Föredragen redigerare:"
#, fuzzy
#~ msgid "KiCad printed circuit board layout (standalone)"
#~ msgstr "KiCad-kretskortfiler"
#, fuzzy
#~ msgid "Gerber File"
#~ msgstr "Gerber-filer"
#~ msgid "Do not show again."
#~ msgstr "Visa inte nästa gång."
#~ msgid "Lock pads"
#~ msgstr "Lås dynor"
#~ msgid "Optimizer effort:"
#~ msgstr "Optimizer-ansträngning:"
#~ msgid ""
#~ "Defines how much time the router shall spend optimizing the routed/shoved "
#~ "traces.\n"
#~ "More effort means cleaner routing (but slower), less effort means faster "
#~ "routing but somewhat jagged traces."
#~ msgstr ""
#~ "Definierar hur mycket tid routern ska spendera på att optimera de "
#~ "dirigerade / knuffade spåren.\n"
#~ "Mer ansträngning innebär renare routing (men långsammare), mindre "
#~ "ansträngning innebär snabbare routing men något ojämna spår."
#~ msgid "low"
#~ msgstr "låg"
#~ msgid "high"
#~ msgstr "hög"
#, fuzzy
#~ msgid "Lock pads of newly added footprints"
#~ msgstr "Låsta fotavtryck"
#~ msgid "&Rotation angle:"
#~ msgstr "&Rotations vinkel:"
#~ msgid "Sheet filename must have a '.kicad_sch' extension."
#~ msgstr "Arknamn måste ha ett \".kicad_sch\" -tillägg."
#~ msgid "Import 2D Drawing file to Footprint Editor on Drawings layer"
#~ msgstr "Importera 2D-ritningsfil till Footprint Editor på ritningslager"
#~ msgid "Place Imported Graphics"
#~ msgstr "Placera importerad grafik"
#~ msgid "Toggles the footprint tree visibility"
#~ msgstr "Växlar synlighet för trädavtrycksträdet"
#, fuzzy
#~ msgid "Enable default spice model simulation"
#~ msgstr "Inaktivera symbol för simulering"
#, fuzzy
#~ msgid "Enable PSpice model simulation"
#~ msgstr "Kryddvärde i simulering"
#, fuzzy
#~ msgid "Enable LTSpice model simulation"
#~ msgstr "Kryddvärde i simulering"
#, fuzzy
#~ msgid "Enable HSpice model simulation"
#~ msgstr "Kryddvärde i simulering"
#~ msgid "Switch Corner Rounding"
#~ msgstr "Byt hörnrundning"
#~ msgid "Switches the corner type of the currently routed track."
#~ msgstr "Växlar hörntyp för det nuvarande dirigerade spåret."
#~ msgid "Plain PCB (no copper or silk)"
#~ msgstr "Vanligt kretskort (inget koppar eller siden)"
#, fuzzy
#~ msgid ""
#~ "Text will not be readable with a thickness greater than 1/4 its width or "
#~ "height."
#~ msgstr ""
#~ "Text kan inte läsas med en tjocklek som är större än\n"
#~ "1/4 dess bredd eller höjd."
#, c-format
#~ msgid "Track width less than minimum track width (%s)."
#~ msgstr "Spårbredd mindre än minsta spårbredd (%s)."
#, c-format
#~ msgid "Via diameter less than minimum via diameter (%s)."
#~ msgstr "Via diameter mindre än minsta via diameter (%s)."
#, fuzzy, c-format
#~ msgid "Via hole diameter less than minimum through hole diameter (%s)."
#~ msgstr "Via diameter mindre än minsta via diameter (%s)."
#, fuzzy
#~ msgid "Via hole diameter larger than via diameter."
#~ msgstr "Via borr större än via diameter."
#, fuzzy, c-format
#~ msgid "Diameter and hole leave via annulus less than minimum (%s)."
#~ msgstr "Diameter och borr lämnar via ringformat mindre än minimum (%s)."
#, c-format
#~ msgid "Differential pair track width less than minimum track width (%s)."
#~ msgstr "Differentialpar spårbredd mindre än minsta spårbredd (%s)."
#, c-format
#~ msgid "Differential pair via gap less than minimum clearance (%s)."
#~ msgstr "Differentialpar via gap mindre än minsta spelrum (%s)."
#, c-format
#~ msgid "Change %s footprint from \"%s\" to \"%s\"."
#~ msgstr "Ändra %s fotavtryck från \"%s\" till \"%s\"."
#~ msgid "Empty Text!"
#~ msgstr "Tom text!"
#~ msgid "Options:"
#~ msgstr "Flaggor:"
#~ msgid ""
#~ "Choose if you want to draw the sheet like it appears on screen,\n"
#~ "or in black and white mode, better to print it when using black and "
#~ "white printers"
#~ msgstr ""
#~ "Välj om du vill rita arket så som det visas på skärmen,\n"
#~ "eller i svartvitt läge, bättre att skriva ut det när du använder "
#~ "svartvita skrivare"
#~ msgid "Custom layer set"
#~ msgstr "Anpassat lageruppsättning"
#~ msgid "Two layers, parts on Front"
#~ msgstr "Två lager, delar på framsidan"
#~ msgid "Two layers, parts on Back"
#~ msgstr "Två lager, delar på baksidan"
#~ msgid "Two layers, parts on Front & Back"
#~ msgstr "Två lager, delar på framsidan och baksidan"
#~ msgid "Four layers, parts on Front"
#~ msgstr "Fyra lager, delar på framsidan"
#~ msgid "Four layers, parts on Front & Back"
#~ msgstr "Fyra lager, delar på Front & Back"
#~ msgid "All layers on"
#~ msgstr "Alla lager på"
#~ msgid "Eeschema (.lib file)"
#~ msgstr "Eeschema (.lib-fil)"
#~ msgid "Net Class Memberships"
#~ msgstr "Netto klassmedlemskap"
#~ msgid "Worksheet"
#~ msgstr "kalkylblad"
#~ msgid "Accelerated Graphics"
#~ msgstr "Accelererad grafik"
#~ msgid "Standard Graphics"
#~ msgstr "Standardgrafik"
#~ msgid "Use software graphics (fall-back)"
#~ msgstr "Använd programgrafik (fallback)"
#~ msgid "Print the frame references."
#~ msgstr "Skriv ut ramreferenserna."
#~ msgid "Table Name"
#~ msgstr "Tabellnamn"
#~ msgid "Add Sheet Pin"
#~ msgstr "Lägg till arknål"
#~ msgid "Add a sheet pin"
#~ msgstr "Lägg till en arknål"
#~ msgid "Export to Pcbnew..."
#~ msgstr "Exportera till Pcbnew ..."
#~ msgid "Export data in Pcbnew format"
#~ msgstr "Exportera data i Pcbnew-format"
#~ msgid "Show worksheet"
#~ msgstr "Visa kalkylblad"
#~ msgid "Edit worksheet graphics and text"
#~ msgstr "Redigera grafik och text på kalkylbladet"
#~ msgid "Vout = Vref * (R1 + R2) / R2"
#~ msgstr "Vout = Vref * (R1 + R2) / R2"
#~ msgid "Rebuild Ratsnest"
#~ msgstr "Återuppbygga Ratsnest"
#~ msgid "Add the selected items to a new group"
#~ msgstr "Lägg till de valda objekten i en ny grupp"
#~ msgid "Flip (mirror) the board view"
#~ msgstr "Vänd (spegla) styrelsen"
#, c-format
#~ msgid "Render time %.0f ms ( %.1f fps)"
#~ msgstr "Render tid %.0f ms (%.1f fps)"
#~ msgid "Mirror Around Horizontal Axis"
#~ msgstr "Spegel runt horisontell axel"
#~ msgid "Mirror Around Vertical Axis"
#~ msgstr "Spegel runt vertikal axel"
#, c-format
#~ msgid ""
#~ "Project name:\n"
#~ "%s\n"
#~ msgstr ""
#~ "Projektnamn:\n"
#~ "%s\n"
#~ msgid "View Gerber Files"
#~ msgstr "Visa Gerber Files"
#~ msgid "Convert Image"
#~ msgstr "Konvertera bild"
#~ msgid "Edit Worksheet"
#~ msgstr "Redigera kalkylblad"
#~ msgid "Zin"
#~ msgstr "Zin"
#~ msgid "R1"
#~ msgstr "R1"
#~ msgid "R2"
#~ msgstr "R2"
#~ msgid "R3"
#~ msgstr "R3"
#~ msgid "TanD:"
#~ msgstr "TanD:"
#~ msgid "mu Rel:"
#~ msgstr "mu Rel:"
#~ msgid "mu Rel C:"
#~ msgstr "mu Rel C:"
#~ msgid "Z"
#~ msgstr "Z"
#~ msgid "Watt"
#~ msgstr "Watt"
#~ msgid "deg C/Watt"
#~ msgstr "grader C / Watt"
#~ msgid "Er"
#~ msgstr "Er"
#~ msgid "TanD"
#~ msgstr "TanD"
#~ msgid "Tangent delta: dielectric loss factor."
#~ msgstr "Tangent delta: dielektrisk förlustfaktor."
#~ msgid "Rho"
#~ msgstr "Rho"
#~ msgid "ErEff:"
#~ msgstr "ErEff:"
#~ msgid "mu Rel S"
#~ msgstr "mu Rel S"
#~ msgid "mu Rel C"
#~ msgstr "mu Rel C"
#~ msgid "mu Rel I"
#~ msgstr "mu Rel jag"
#~ msgid "ErEff Even:"
#~ msgstr "ErEff Even:"
#~ msgid "ErEff Odd:"
#~ msgstr "ErEff Udda:"
#~ msgid "ErEnv"
#~ msgstr "ErEnv"
#~ msgid "oz/ft^2"
#~ msgstr "oz / ft ^ 2"
#~ msgid "Radian"
#~ msgstr "Radian"
#~ msgid "Degree"
#~ msgstr "Grad"
#~ msgid "Tracks & Vias"
#~ msgstr "Spår och Vias"
#~ msgid "Save Copy of Symbol"
#~ msgstr "Spara en kopia av symbolen"
#~ msgid "Save the current symbol in the schematic"
#~ msgstr "Spara den aktuella symbolen i schemat"
#~ msgid "Messages:"
#~ msgstr "Meddelanden:"
#~ msgid "E-Series Resistor Calculator"
#~ msgstr "E-serie motståndsräknare"
#~ msgid "Available Values"
#~ msgstr "Tillgängliga värden"
#~ msgid "Regulator list change"
#~ msgstr "Ändring av regulatorlista"
#, c-format
#~ msgid ""
#~ "Board thickness %s differs from stackup thickness %s\n"
#~ "Allowed max error %s"
#~ msgstr ""
#~ "Brädtjocklek %s skiljer sig från staplingstjocklek %s\n"
#~ "Tillåtet maxfel %s"
#~ msgid ""
#~ "A locked dielectric thickness is < 0\n"
#~ "Unlock it or change its thickness"
#~ msgstr ""
#~ "En låst dielektrisk tjocklek är <0\n"
#~ "Lås upp den eller ändra dess tjocklek"
#~ msgid ""
#~ "Cannot calculate dielectric thickness\n"
#~ "At least one dielectric layer must be not locked"
#~ msgstr ""
#~ "Det går inte att beräkna dielektrisk tjocklek\n"
#~ "Minst ett dielektriskt lager får inte vara låst"
#~ msgid ""
#~ "Cannot calculate dielectric thickness\n"
#~ "Fixed thickness too big or board thickness too small"
#~ msgstr ""
#~ "Det går inte att beräkna dielektrisk tjocklek\n"
#~ "Fast tjocklek för stor eller brädtjocklek för liten"
#~ msgid "Physical stackup has not been updated to match layer count."
#~ msgstr "Fysisk stapling har inte uppdaterats för att matcha lagerantalet."
#~ msgid ""
#~ "Set thickness of all not locked dielectric layers.\n"
#~ "The thickness will be the same for all not locked dielectric layers."
#~ msgstr ""
#~ "Ställ in tjockleken på alla ej låsta dielektriska lager.\n"
#~ "Tjockleken kommer att vara densamma för alla ej låsta dielektriska lager."
#~ msgid ""
#~ "Selection of the pen size used to draw items which have no pen size "
#~ "specified."
#~ msgstr ""
#~ "Val av pennstorlek som används för att rita föremål som inte har någon "
#~ "specificerad pennstorlek."
#, c-format
#~ msgid "Via drill less than minimum through hole (%s)."
#~ msgstr "Via borrning mindre än minimum genomgående hål (%s)."
#~ msgid "Save to Board"
#~ msgstr "Spara till styrelsen"
#~ msgid "Save to Library"
#~ msgstr "Spara i biblioteket"
#~ msgid "Save changes to library"
#~ msgstr "Spara ändringar i biblioteket"
#~ msgid "Run push & shove router (single tracks)"
#~ msgstr "Kör push & shove-router (enkelspår)"
#~ msgid "Run push & shove router (differential pairs)"
#~ msgstr "Kör push & shove-router (differentiella par)"
#~ msgid "Footprint place files"
#~ msgstr "Platsfiler för fotavtryck"
#, c-format
#~ msgid "Multiple item %s%s (unit %d)\n"
#~ msgstr "Flera objekt %s %s (enhet %d)\n"
#, fuzzy
#~ msgid "Annotation is incomplete. ERC cannot be run."
#~ msgstr "Kommentaren är inte klar. ERC kan inte köras."
#~ msgid "Annotation not complete. ERC cannot be run."
#~ msgstr "Kommentaren är inte klar. ERC kan inte köras."
#~ msgid "Show Annotation dialog."
#~ msgstr "Visa dialogrutan Annotation."
#~ msgid "Schematic netlist not available"
#~ msgstr "Schematisk netlista inte tillgänglig"
#~ msgid "You need to enable at least one source"
#~ msgstr "Du måste aktivera minst en källa"
#~ msgid "You need to select DC source (sweep 2)"
#~ msgstr "Du måste välja DC-källa (svep 2)"
#~ msgid "DC Sweep Source 1"
#~ msgstr "DC Sweep Source 1"
#~ msgid "DC Sweep Source 2"
#~ msgstr "DC Sweep Source 2"
#~ msgid "The schematic file will be converted to the new file format on save."
#~ msgstr ""
#~ "Den schematiska filen konverteras till det nya filformatet när du sparar."
#~ msgid ""
#~ "This schematic was saved in the legacy file format which is no longer "
#~ "supported and will be saved using the new file format.\n"
#~ "\n"
#~ "The new file format cannot be opened with previous versions of KiCad."
#~ msgstr ""
#~ "Denna schemat sparades i det äldre filformatet som inte längre stöds och "
#~ "kommer att sparas med det nya filformatet.\n"
#~ "\n"
#~ "Det nya filformatet kan inte öppnas med tidigare versioner av KiCad."
#~ msgid "Settings"
#~ msgstr "Inställningar"
#, c-format
#~ msgid "Error saving %s symbol library table."
#~ msgstr "Fel vid sparande av %s symbolbibliotekstabell."
#~ msgid "global"
#~ msgstr "global"
#~ msgid "project"
#~ msgstr "projekt"
#~ msgid "Cannot relink footprints because schematic is not fully annotated."
#~ msgstr ""
#~ "Det går inte att länka fotavtryck igen eftersom schemat inte är helt "
#~ "kommenterat."
#~ msgid "No off grid or duplicate pins were found."
#~ msgstr "Ingen av rutnät eller dubbla stift hittades."
#~ msgid "Filter Selection"
#~ msgstr "Filterval"
#~ msgid "Generate Footprint Position Files"
#~ msgstr "Generera Footprint Position Files"
#, c-format
#~ msgid ""
#~ "Value < %s can be time consuming when \n"
#~ "filling zones."
#~ msgstr ""
#~ "Värde <%s kan vara tidskrävande när\n"
#~ "fyllningszoner."
#~ msgid "Unconnected items"
#~ msgstr "Oanslutna föremål"
#~ msgid "Component Placement File generation OK."
#~ msgstr "Komponentplacering Filgenerering OK."
#~ msgid "Select Library Table"
#~ msgstr "Välj Bibliotektabell"
#~ msgid "Footprint Positions (.pos)..."
#~ msgstr "Fotavtryckspositioner (.pos) ..."
#~ msgid "Filter the types of items in the selection"
#~ msgstr "Filtrera typerna av objekt i urvalet"
#~ msgid "Other..."
#~ msgstr "Annan..."
#~ msgid ""
#~ "Force line segment directions to H, V or 45 degrees when drawing on "
#~ "technical layers."
#~ msgstr ""
#~ "Tvinga linjesegmentets riktningar till H, V eller 45 grader när du ritar "
#~ "på tekniska lager."
#, fuzzy
#~ msgid "Add footprints with pads unlocked"
#~ msgstr "Lägg till Footprint Filter"
#, c-format
#~ msgid "More than one symbol found in symbol file \"%s\"."
#~ msgstr "Mer än en symbol finns i symbolfilen \"%s\"."
#, c-format
#~ msgid "Saving symbol in \"%s\""
#~ msgstr "Sparande symbol i \"%s\""
#, c-format
#~ msgid "An error occurred saving symbol file \"%s\""
#~ msgstr "Ett fel inträffade när symbolfilen \"%s\" sparades"
#~ msgid "Import existing drawings"
#~ msgstr "Importera befintliga ritningar"
#~ msgid "Export current drawing"
#~ msgstr "Exportera aktuell ritning"
#~ msgid "No pins!"
#~ msgstr "Inga stift!"
#~ msgid "Marker Information"
#~ msgstr "Markörinformation"
#~ msgid "Set to 0 for default"
#~ msgstr "Ställ in på 0 för standard"
#~ msgid "Step"
#~ msgstr "Steg"
#~ msgid "Non plated pads copper as bare copper"
#~ msgstr "Icke-pläterade dynor koppar som bar koppar"
#~ msgid ""
#~ "Display plated pads as plated but other copper as raw copper material. "
#~ "(Slow)"
#~ msgstr ""
#~ "Visa pläterade dynor som pläterade men andra koppar som råa "
#~ "kopparmaterial. (Långsam)"
#~ msgid "Prefer selection to dragging"
#~ msgstr "Föredra valet framför att dra"
#~ msgid "Mouse Buttons"
#~ msgstr "Musknapp"
#~ msgid "Mouse Wheel and Touchpad Scrolling"
#~ msgstr "Rulla med mushjul och pekplatta"
#~ msgid "Behavior of vertical touchpad or scroll wheel:"
#~ msgstr "Uppförande av vertikal pekplatta eller rullhjul:"
#~ msgid "While pressing:"
#~ msgstr "Medan du trycker på:"
#~ msgid ""
#~ "Footprint can be freely moved and auto placed. User can arbitrarily "
#~ "select and edit footprint's pads."
#~ msgstr ""
#~ "Fotavtryck kan flyttas fritt och placeras automatiskt. Användaren kan "
#~ "godtyckligt välja och redigera fotavtryckets kuddar."
#~ msgid "Incorrect value for pad offset."
#~ msgstr "Felaktigt värde för padoffset."
#~ msgid "Pad setup errors list"
#~ msgstr "Lista över fel för felinställningar"
#~ msgid "&Keep unused layers"
#~ msgstr "Odefinierade lager"
#~ msgid "&Keep pads at first and last layers"
#~ msgstr "& Håll dynorna i första och sista lagret"
#~ msgid "Unused Pad Layers"
#~ msgstr "Oanvända dynlager"
#~ msgid "Flip"
#~ msgstr "Vänd"
#~ msgid "Position:"
#~ msgstr "Position:"
#~ msgid "Clarify selection"
#~ msgstr "Förtydliga urvalet"
#~ msgid "Clarify Selection"
#~ msgstr "Förtydliga urvalet"
#~ msgid "Current track/via gap setting violates design rules for this net."
#~ msgstr ""
#~ "Nuvarande inställning av spår / via gap bryter mot designregler för detta "
#~ "nät."
#~ msgid "Current track width setting violates design rules."
#~ msgstr "Nuvarande spårbreddinställning bryter mot designregler."
#~ msgid "Convert..."
#~ msgstr "Konvertera..."
#, fuzzy
#~ msgid "Tight"
#~ msgstr "Höger"
#~ msgid "Loose"
#~ msgstr "Lösa"
#~ msgid "Very loose"
#~ msgstr "Mycket lös"
#, fuzzy
#~ msgid "Drill too small"
#~ msgstr "Text bredd:"
#, c-format
#~ msgid "(%s %s; actual %s)"
#~ msgstr "(%s %s; faktisk %s)"
#~ msgid "Pad local clearance must be zero or greater than zero"
#~ msgstr "Kuddens lokala spelrum måste vara noll eller större än noll"
#~ msgid "Pad local solder mask clearance must be zero or greater than zero"
#~ msgstr "Avstånd från lokal padlödmask måste vara noll eller större än noll"
#, c-format
#~ msgid "Pad local solder mask clearance must be greater than %s"
#~ msgstr "Avståndet från den lokala lödmasken måste vara större än %s"
#~ msgid "Warning: The pad has been defined in an inner layer only."
#~ msgstr "Varning: dynan har definierats endast i ett inre lager."
#~ msgid "Incorrect corner size value"
#~ msgstr "Fel hörnstorleksvärde"
#~ msgid "Corner size value must be smaller than 50%"
#~ msgstr "Hörnstorleksvärdet måste vara mindre än 50%"
#~ msgid ""
#~ "Incorrect pad shape: the shape must be equivalent to only one polygon"
#~ msgstr "Felaktig dynform: formen måste motsvara endast en polygon"
#, c-format
#~ msgid ""
#~ "This will change the net assigned to %s pad %s to %s.\n"
#~ "Do you wish to continue?"
#~ msgstr ""
#~ "Detta ändrar nätet som tilldelats %s pad %s till %s.\n"
#~ "Vill du fortsätta?"
#, c-format
#~ msgid ""
#~ "This will change the net assigned to %lu connected pads to %s.\n"
#~ "Do you wish to continue?"
#~ msgstr ""
#~ "Detta ändrar nätet som tilldelats %lu anslutna dynor till %s.\n"
#~ "Vill du fortsätta?"
#~ msgid "Continue"
#~ msgstr "Fortsätt"
#, c-format
#~ msgid ""
#~ "The selected file is not valid or might be corrupt: The layer stack "
#~ "refers to layer ID '%s' which does not exist in the layer definitions."
#~ msgstr ""
#~ "Den valda filen är inte giltig eller kan vara skadad: Lagerstacken "
#~ "refererar till lager-ID '%s' som inte finns i lagerdefinitionerna."
#~ msgid "Global label"
#~ msgstr "Globalt märke"
#~ msgid "Hierarchical label"
#~ msgstr "Hierarkisk etikett"
#~ msgid "Pin number"
#~ msgstr "Pinkod"
#~ msgid "Net name"
#~ msgstr "Nätnamn"
#~ msgid "Sheet label"
#~ msgstr "Ark etikett"
#~ msgid "Through Hole Pads"
#~ msgstr "Genom hålkuddar"
#, fuzzy
#~ msgid "Associate footprint"
#~ msgstr "Standardformat"
#, fuzzy
#~ msgid "Associate selected footprint with selected components"
#~ msgstr "Öppna filen i en textredigerare"
#, c-format
#~ msgid "pin %s"
#~ msgstr "stift %s"
#~ msgid "component"
#~ msgstr "komponent"
#, c-format
#~ msgid "%s %s found"
#~ msgstr "%s %s hittades"
#, c-format
#~ msgid "Component %s not found"
#~ msgstr "Komponent %s hittades inte"
#, c-format
#~ msgid "%s %s \"%s\" from \"%s\" to \"%s\""
#~ msgstr "%s %s \"%s\" från \"%s\" till \"%s\""
#, fuzzy
#~ msgid "symbols"
#~ msgstr "Placera block"
#, fuzzy
#~ msgid "Reset field visibilities"
#~ msgstr "Rutnäts egenskaper"
#, fuzzy
#~ msgid "Reset field sizes and styles"
#~ msgstr "Skapa en ny mapp"
#, fuzzy
#~ msgid "Reset field positions"
#~ msgstr "Rutnäts egenskaper"
#~ msgid "Multi-Symbol Placement"
#~ msgstr "Flersymbolsplacering"
#~ msgid "Place multiple copies of the symbol."
#~ msgstr "Placera flera kopior av symbolen."
#~ msgid ""
#~ "Check this option when creating multiple unit symbols and all units are "
#~ "not interchangeable"
#~ msgstr ""
#~ "Markera det här alternativet när du skapar flera enhetssymboler och alla "
#~ "enheter kan inte bytas ut"
#, fuzzy
#~ msgid "Plot sheet background color"
#~ msgstr "Välj bakgrundsfärg"
#~ msgid "No Colon in Nicknames"
#~ msgstr "Ingen kolon i smeknamn"
#, c-format
#~ msgid "Duplicate Nickname: \"%s\"."
#~ msgstr "Duplikat Smeknamn: \"%s\"."
#~ msgid "Please Delete or Modify One"
#~ msgstr "Ta bort eller ändra en"
#, c-format
#~ msgid ""
#~ "The current configuration does not include a library with the\n"
#~ "nickname \"%s\". Use Manage Symbol Libraries\n"
#~ "to edit the configuration."
#~ msgstr ""
#~ "Den aktuella konfigurationen inkluderar inte ett bibliotek med\n"
#~ "smeknamn \"%s\". Använd Hantera symbolbibliotek\n"
#~ "för att redigera konfigurationen."
#, fuzzy
#~ msgid "Symbol library not found."
#~ msgstr "Välj bibliotek att bläddra i"
#, fuzzy, c-format
#~ msgid ""
#~ "Library \"%s\" is read only and must be saved as a different library."
#~ msgstr "Spara det nuvarande aktiva biblioteket"
#, fuzzy
#~ msgid "Select symbol to browse"
#~ msgstr "Välj bibliotek att bläddra i"
#, fuzzy, c-format
#~ msgid "Cannot find footprint for symbol '%s'."
#~ msgstr "Filen %s kunde inte hittas"
#, fuzzy, c-format
#~ msgid "Change '%s' labels to '%s'."
#~ msgstr "&Spara inställningar"
#, fuzzy, c-format
#~ msgid "Change '%s' global labels to '%s'."
#~ msgstr "&Spara inställningar"
#, fuzzy, c-format
#~ msgid "Change '%s' hierarchical label to '%s'."
#~ msgstr "&Spara inställningar"
#, fuzzy
#~ msgid "Run Cvpcb"
#~ msgstr "Avsluta Cvpcb"
#, fuzzy
#~ msgid "Open PCB in Pcbnew"
#~ msgstr "Öppna pcbnew-manualen"
#, fuzzy
#~ msgid "Edit Component Name"
#~ msgstr "Komponentnamn"
#, fuzzy
#~ msgid "Default Values:"
#~ msgstr "Standard"
#, c-format
#~ msgid "File \"%s\" written"
#~ msgstr "Filen %s skriven"
#, c-format
#~ msgid "Page size: width %.4g height %.4g"
#~ msgstr "Sidstorlek: bredd %.4g höjd %.4g"
#, fuzzy
#~ msgid "3D Settings"
#~ msgstr "3D-inställningar"
#, c-format
#~ msgid "%s footprint \"%s\" (from \"%s\") to \"%s\""
#~ msgstr "%s fotavtryck \"%s\" (från \"%s\") till \"%s\""
#, fuzzy
#~ msgid "Reset text layers and visibilities"
#~ msgstr "Rutnäts egenskaper"
#, fuzzy
#~ msgid "Reset text sizes, styles and positions"
#~ msgstr "Rutnäts egenskaper"
#, fuzzy
#~ msgid "Reset fabrication attributes"
#~ msgstr "Attributer"
#, fuzzy
#~ msgid "Reset 3D models"
#~ msgstr "Välj nät"
#~ msgid ""
#~ "The changes made cannot be undone. Are you sure you want to update the "
#~ "PCB?"
#~ msgstr ""
#~ "Ändringarna kan inte ångras. Är du säker på att du vill uppdatera "
#~ "kretskortet?"
#, fuzzy, c-format
#~ msgid "Duplicate nicknames \"%s\"."
#~ msgstr "Duplicera"
#~ msgid "Via hole larger than diameter"
#~ msgstr "Via hål större än diameter"
#, fuzzy
#~ msgid "Keepout violation"
#~ msgstr "Radera spår"
#, c-format
#~ msgid "Wrote board file: \"%s\""
#~ msgstr "Skrev styrelsefil: \"%s\""
#, fuzzy, c-format
#~ msgid "Component \"%s\" replaced in \"%s\""
#~ msgstr "Komponenten %s sparades i %s"
#, fuzzy, c-format
#~ msgid "Component \"%s\" added in \"%s\""
#~ msgstr "Komponenten %s sparades i %s"
#~ msgid ""
#~ "Errors occurred during the netlist update. Unless you fix them your board "
#~ "will not be consistent with the schematics."
#~ msgstr ""
#~ "Fel inträffade under uppdateringen av netlistan. Om du inte fixar dem "
#~ "kommer ditt bräda inte att överensstämma med schemat."
#~ msgid "Anonymous"
#~ msgstr "Anonym"
#, c-format
#~ msgid ""
#~ "File \"%s\" is format version: %d.\n"
#~ "I only support format version <= %d.\n"
#~ "Please upgrade Pcbnew to load this file."
#~ msgstr ""
#~ "Filen \"%s\" är formatversion: %d.\n"
#~ "Jag stöder endast formatversion <= %d.\n"
#~ "Uppgradera Pcbnew för att ladda den här filen."
#, fuzzy
#~ msgid "Locked items cannot be deleted"
#~ msgstr "Hjälpfilen '%s' kunde inte hittas."
#, fuzzy
#~ msgid "Toggle Locking"
#~ msgstr "Låst"
#~ msgid "Bitmap Info:"
#~ msgstr "Bitmappsinformation:"
#~ msgid "Format:"
#~ msgstr "Format:"
#, fuzzy
#~ msgid "Change \"%s\" reference designator to \"%s\"."
#~ msgstr "&Spara inställningar"
#, fuzzy
#~ msgid "Change %s value from \"%s\" to \"%s\"."
#~ msgstr "&Spara inställningar"
#~ msgid "Formula:"
#~ msgstr "Formel:"
#~ msgid "Unable to find edge with an endpoint of (%s, %s)."
#~ msgstr "Det gick inte att hitta kant med en slutpunkt på (%s, %s)."
#~ msgid "Cannot determine the board outline."
#~ msgstr "Det går inte att bestämma tavlan."
#~ msgid "Set thickness to 0 for a filled circle."
#~ msgstr "Ställ in tjockleken på 0 för en fylld cirkel."
#~ msgid "Set thickness to 0 for a filled polygon."
#~ msgstr "Ställ in tjockleken på 0 för en fylld polygon."
#~ msgid "Track mouse drag behavior:"
#~ msgstr "Spåra musens dragbeteende:"
#, fuzzy
#~ msgid "Drill/Place Origin"
#~ msgstr "Rutnäts origo"
#~ msgid ""
#~ "Unable to calculate the board outlines; fall back to using the board "
#~ "boundary box."
#~ msgstr ""
#~ "Det går inte att beräkna tavlan; återgå till att använda brädans "
#~ "gränsruta."
#~ msgid "Processing courtyard of \"%s\": %s"
#~ msgstr "Bearbetar innergården \"%s\": %s"
#, fuzzy
#~ msgid "Line width (DXF import):"
#~ msgstr "Text bredd:"
#~ msgid "(Cutout)"
#~ msgstr "(Skära ut)"
#~ msgid "(Rule Area)"
#~ msgstr "(Regelområde)"
#, fuzzy
#~ msgid "Modify module properties"
#~ msgstr "Modulegenskaper"
#~ msgid ""
#~ "This item was on a non-existing or forbidden layer.\n"
#~ "It has been moved to the first allowed layer. Please fix it."
#~ msgstr ""
#~ "Den här artikeln fanns i ett icke-existerande eller förbjudet lager.\n"
#~ "Den har flyttats till det första tillåtna lagret. Snälla fixa det."
#, fuzzy
#~ msgid "Other corners:"
#~ msgstr "Spara inställningar"
#~ msgid "Mode:"
#~ msgstr "Läge:"
#, fuzzy
#~ msgid "Via Length:"
#~ msgstr "Pin längd:"
#, fuzzy
#~ msgid "Constant"
#~ msgstr "Porträtt"
#, fuzzy
#~ msgid "From Stackup"
#~ msgstr "Rutnätsstorlek"
#~ msgid "Unsupported Eagle layer '%s' (%d), converted to Dwgs.User layer"
#~ msgstr "Ej stödt Eagle-lager '%s' (%d), konverterat till Dwgs.User-lager"
#~ msgid "unknown graphic type: %d"
#~ msgstr "okänd grafisk typ: %d"
#~ msgid "unknown pad attribute: %d"
#~ msgstr "okänt pad-attribut: %d"
#~ msgid "Preferences...\tCTRL+,"
#~ msgstr "Inställningar... CTRL+,"
#~ msgid ""
#~ "Used by KiCad to define the URL of the repository of the official KiCad "
#~ "footprint libraries."
#~ msgstr ""
#~ "Används av KiCad för att definiera webbadressen till förvaret för de "
#~ "officiella KiCad-fotavtrycksbiblioteken."
#~ msgid "Cut\tCTRL+X"
#~ msgstr "Klipp ut CTRL + X"
#~ msgid "Copy\tCTRL+C"
#~ msgstr "Kopiera CTRL + C"
#~ msgid "Paste\tCTRL+V"
#~ msgstr "Klistra in CTRL + V."
#~ msgid "Select All\tCTRL+A"
#~ msgstr "Välj Alla CTRL + A."
#~ msgid "Close\tCTRL+W"
#~ msgstr "Stäng CTRL + W"
#~ msgid "Annotation not complete. ERC cannot be run. "
#~ msgstr "Anteckningen är inte slutförd. DET går inte att köra ERC. "
#, fuzzy
#~ msgid ""
#~ "\n"
#~ "\n"
#~ "Front Modules"
#~ msgstr "Inga moduler"
#, fuzzy
#~ msgid ""
#~ "\n"
#~ "\n"
#~ "Back Modules"
#~ msgstr "Lås modul"
#~ msgid "Test tracks against zone fills (slow)"
#~ msgstr "Testa spår mot zonfyllningar (långsam)"
#~ msgid ""
#~ "If selected, tracks will be tested against copper zones. \n"
#~ "If copper zones are up to date, this test should be not needed.\n"
#~ "\n"
#~ "This test can be *very slow* for complicated designs."
#~ msgstr ""
#~ "Om valt, kommer spår att testas mot kopparzoner.\n"
#~ "Om kopparzoner är uppdaterade, bör detta test inte behövas.\n"
#~ "\n"
#~ "Detta test kan vara * mycket långsamt * för komplicerade mönster."
#, fuzzy
#~ msgid "%s selected footprint"
#~ msgstr "Standardformat"
#~ msgid "%s"
#~ msgstr "%s"
#~ msgid "Net Id"
#~ msgstr "Netto-id"
#, fuzzy
#~ msgid "Pad count"
#~ msgstr "ta bort korsning"
#, fuzzy
#~ msgid "Via count"
#~ msgstr "Vertikalt"
#, fuzzy
#~ msgid "Board length"
#~ msgstr "Rutnätsstorlek"
#, fuzzy
#~ msgid "Die length"
#~ msgstr "Pin längd:"
#, fuzzy
#~ msgid "New"
#~ msgstr "&Ny"
#~ msgid "Choose a folder to save the downloaded libraries"
#~ msgstr "Välj en mapp för att spara de nedladdade biblioteken"
#~ msgid "KISYS3DMOD path not defined , or not existing"
#~ msgstr "KISYS3DMOD-sökväg inte definierad eller inte existerande"
#, fuzzy
#~ msgid "Aborted by user"
#~ msgstr "Används redan"
#~ msgid "Welcome to the 3D shape Libraries downloader Wizard!"
#~ msgstr "Välkommen till guiden för nedladdning av 3D-formbibliotek!"
#~ msgid "Please select the URL for the 3D libraries to download"
#~ msgstr "Välj webbadressen för 3D-biblioteken som ska laddas ner"
#~ msgid "https://github.com/KiCad/packages3d"
#~ msgstr "https://github.com/KiCad/packages3d"
#~ msgid "3D shape local folder:"
#~ msgstr "Lokal mapp i 3D-form:"
#, fuzzy
#~ msgid "Default 3D Path"
#~ msgstr "Standardformat"
#~ msgid ""
#~ "It is not possible to write in the selected directory.\n"
#~ "Please choose another one."
#~ msgstr ""
#~ "Det är inte möjligt att skriva i den valda katalogen.\n"
#~ "Välj en annan."
#~ msgid "Visit our official Kicad repository on Github and get more libraries"
#~ msgstr "Besök vårt officiella Kicad-arkiv på Github och få fler bibliotek"
#~ msgid "Unselect all"
#~ msgstr "Avmarkera alla"
#, fuzzy
#~ msgid "Local library folder:"
#~ msgstr "Standardsökväg för bibliotek:"
#, fuzzy
#~ msgid "3D shape libraries to be downloaded:"
#~ msgstr "Inga bibliotek är laddade"
#~ msgid "Add 3D Shape Libraries Wizard"
#~ msgstr "Lägg till guiden för 3D-formbibliotek"
#~ msgid "Checking copper graphic & text clearances..."
#~ msgstr "Kontrollerar koppargrafik och textavstånd ..."
#~ msgid "max vias: %d; actual: %d"
#~ msgstr "max vias: %d; faktiska: %d"
#~ msgid "Length-constrained traces for rule '%s':"
#~ msgstr "Längdsbegränsade spår för regel '%s':"
#~ msgid ""
#~ "malformed URL:\n"
#~ "\"%s\""
#~ msgstr ""
#~ "felaktig webbadress:\n"
#~ "\"%s\""
#~ msgid ""
#~ "Error fetching JSON data from URL \"%s\".\n"
#~ "Reason: \"%s\""
#~ msgstr ""
#~ "Fel vid hämtning av JSON-data från URL \"%s\".\n"
#~ "Anledning: \"%s\""
#~ msgid ""
#~ "Footprint\n"
#~ "\"%s\"\n"
#~ "is not in the writable portion of this Github library\n"
#~ "\"%s\""
#~ msgstr ""
#~ "Fotavtryck\n"
#~ "\"%s\"\n"
#~ "finns inte i den skrivbara delen av detta Github-bibliotek\n"
#~ "\"%s\""
#~ msgid ""
#~ "Set this property to a directory where footprints are to be written as "
#~ "pretty footprints when saving to this library. Anything saved will take "
#~ "precedence over footprints by the same name in the github repo. These "
#~ "saved footprints can then be sent to the library maintainer as updates. "
#~ "<p>The directory <b>must</b> have a <b>.pretty</b> file extension because "
#~ "the format of the save is pretty.</p>"
#~ msgstr ""
#~ "Ställ in den här egenskapen till en katalog där fotavtryck ska skrivas "
#~ "som vackra fotavtryck när du sparar i detta bibliotek. Allt som sparas "
#~ "har företräde framför fotavtryck med samma namn i github repo. Dessa "
#~ "sparade fotavtryck kan sedan skickas till bibliotekshållaren som "
#~ "uppdateringar. <p> Katalogen <b> måste </b> ha filtillägget <b> .pretty </"
#~ "b> eftersom sparningsformatet är vackert. </p>"
#~ msgid ""
#~ "option \"%s\" for Github library \"%s\" must point to a writable "
#~ "directory ending with '.pretty'."
#~ msgstr ""
#~ "alternativet \"%s\" för Github-biblioteket \"%s\" måste peka på en "
#~ "skrivbar katalog som slutar med '.pretty'."
#~ msgid ""
#~ "%s\n"
#~ "Cannot get/download Zip archive: \"%s\"\n"
#~ "for library path: \"%s\".\n"
#~ "Reason: \"%s\""
#~ msgstr ""
#~ "%s\n"
#~ "Kan inte hämta / ladda ner zip-arkiv: \"%s\"\n"
#~ "för biblioteksväg: \"%s\".\n"
#~ "Orsak: \"%s\""
#~ msgid ""
#~ "Cannot download library \"%s\".\n"
#~ "The library does not exist on the server"
#~ msgstr ""
#~ "Det går inte att ladda ner biblioteket \"%s\".\n"
#~ "Biblioteket finns inte på servern"
#~ msgid "Add &3D Shapes Libraries Wizard..."
#~ msgstr "Guiden Lägg till & 3D-former Bibliotek ..."
#~ msgid "Download 3D shape libraries from GitHub"
#~ msgstr "Ladda ner 3D-formbibliotek från GitHub"
#, fuzzy
#~ msgid "Push changes from schematic to PCB"
#~ msgstr "Skriv ut schema"
#, fuzzy
#~ msgid "Push changes from PCB to Schematic"
#~ msgstr "Öppna schema"
#, fuzzy
#~ msgid "in symbol %c"
#~ msgstr "Redigera fält"
#, fuzzy
#~ msgid "of converted"
#~ msgstr "Konvertera"
#, fuzzy
#~ msgid "of normal"
#~ msgstr " Normal"
#, fuzzy
#~ msgid "Parameters:"
#~ msgstr "Parameter"
#, fuzzy
#~ msgid "Archive Footprints"
#~ msgstr "Lägg till pinne"
#, fuzzy
#~ msgid "Field Locate Reference"
#~ msgstr "Nytt bibliotek"
#, fuzzy
#~ msgid "Field Locate Value"
#~ msgstr "Rotera fält"
#, fuzzy
#~ msgid "Field Locate Footprint"
#~ msgstr "&Bläddra filer"
#, fuzzy
#~ msgid "new"
#~ msgstr "&Ny"
#, fuzzy
#~ msgid "Run"
#~ msgstr "&Kör"
#, fuzzy
#~ msgid "p"
#~ msgstr "Upp"
#, fuzzy
#~ msgid "n"
#~ msgstr "in"
#, fuzzy
#~ msgid "milli"
#~ msgstr "millimeter"
#, fuzzy
#~ msgid "k"
#~ msgstr "0k"
#, fuzzy
#~ msgid "1e3"
#~ msgstr "&13"
#, fuzzy
#~ msgid "1e6"
#~ msgstr "&16"
#, fuzzy
#~ msgid "1e9"
#~ msgstr "&19"
#, fuzzy
#~ msgid "Key words:"
#~ msgstr "Nyckelord:"
#, fuzzy
#~ msgid "File: "
#~ msgstr "&Arkiv"
#, fuzzy
#~ msgid "- Width: "
#~ msgstr "Bredd:"
#, fuzzy
#~ msgid "- Height: "
#~ msgstr "Höjd:"
#, fuzzy
#~ msgid ""
#~ "Components\n"
#~ "----------"
#~ msgstr "Komponenter"
#~ msgid "Unable to create "
#~ msgstr "Kan inte skapa"
#, fuzzy
#~ msgid "min"
#~ msgstr "in"
#~ msgid "Zoom +"
#~ msgstr "Zooma +"
#~ msgid "Zoom -"
#~ msgstr "Zooma -"
#, fuzzy
#~ msgid "Right View"
#~ msgstr "Höger"
#, fuzzy
#~ msgid "Left View"
#~ msgstr "Vänster"
#, fuzzy
#~ msgid "Move Left <-"
#~ msgstr "Flytta vänster <-"
#, fuzzy
#~ msgid "Move Right ->"
#~ msgstr "Flytta höger ->"
#~ msgid "Move Up ^"
#~ msgstr "Flytta upp ^"
#~ msgid "&Exit"
#~ msgstr "&Avsluta"
#~ msgid "Zoom &In"
#~ msgstr "Zooma &In"
#~ msgid "Zoom &Out"
#~ msgstr "Zooma &ut"
#, fuzzy
#~ msgid "Zoom to &Fit"
#~ msgstr "Zooma &ut"
#~ msgid "&Redraw"
#~ msgstr "&Rita om"
#, fuzzy
#~ msgid "OpenGL Options"
#~ msgstr "Linjeegenskaper"
#, fuzzy
#~ msgid "Show Copper Thickness"
#~ msgstr "Visa pinnar"
#, fuzzy
#~ msgid "List Hotkeys"
#~ msgstr "Snabbtangenter"
#, fuzzy
#~ msgid "Zoom in "
#~ msgstr "Zooma "
#, fuzzy
#~ msgid "Viewer 3D"
#~ msgstr "3D-visare"
#, fuzzy
#~ msgid "Blue 1"
#~ msgstr "Värde "
#, fuzzy
#~ msgid "Green 1"
#~ msgstr "Grekiska"
#, fuzzy
#~ msgid "Brown 1"
#~ msgstr "Bläddra"
#, fuzzy
#~ msgid "Blue 2"
#~ msgstr "Värde "
#, fuzzy
#~ msgid "Green 2"
#~ msgstr "Grekiska"
#, fuzzy
#~ msgid "Brown 2"
#~ msgstr "Bläddra"
#, fuzzy
#~ msgid "Blue 3"
#~ msgstr "Värde "
#, fuzzy
#~ msgid "Green 3"
#~ msgstr "Grekiska"
#, fuzzy
#~ msgid "Blue 4"
#~ msgstr "Värde "
#, fuzzy
#~ msgid "Green 4"
#~ msgstr "Grekiska"
#~ msgid "Mirror Y"
#~ msgstr "Spegla Y"
#~ msgid "Undo Last"
#~ msgstr "Ånga senaste"
#, fuzzy
#~ msgid "Graphics (Accelerated):"
#~ msgstr "Grafisk linje"
#, fuzzy
#~ msgid "Reset Hotkeys"
#~ msgstr "Snabbtangent"
#, fuzzy
#~ msgid "Set to Defaults"
#~ msgstr "Standard"
#, fuzzy
#~ msgid "Import..."
#~ msgstr "Importera"
#, fuzzy
#~ msgid "Export these hotkey definitions to an external file"
#~ msgstr "Konfigurationfil för snabbtangenter"
#, fuzzy
#~ msgid "Could not create backup file \"%s\""
#~ msgstr "Kunde inte skapa filen "
#~ msgid "Block Move"
#~ msgstr "Flytta block"
#, fuzzy
#~ msgid "Block Duplicate"
#~ msgstr "Duplicera"
#~ msgid "Block Delete"
#~ msgstr "Ta bort block"
#~ msgid "Block Copy"
#~ msgstr "Kopiera block"
#~ msgid "Block Paste"
#~ msgstr "Klistra in block"
#~ msgid "Show grid"
#~ msgstr "Visa rutnät"
#, fuzzy
#~ msgid "Redraw View"
#~ msgstr "Rita om"
#~ msgid "French"
#~ msgstr "Franska"
#~ msgid "Spanish"
#~ msgstr "Spanska"
#~ msgid "Portuguese"
#~ msgstr "Portugisiska"
#~ msgid "Italian"
#~ msgstr "Italienska"
#~ msgid "German"
#~ msgstr "Tyska"
#~ msgid "Greek"
#~ msgstr "Grekiska"
#~ msgid "Slovenian"
#~ msgstr "Slovenska"
#, fuzzy
#~ msgid "Slovak"
#~ msgstr "Slovenska"
#~ msgid "Hungarian"
#~ msgstr "Ungerska"
#~ msgid "Polish"
#~ msgstr "Polska"
#~ msgid "Czech"
#~ msgstr "Tjeckiska"
#~ msgid "Korean"
#~ msgstr "Koreanska"
#~ msgid "Chinese simplified"
#~ msgstr "Kinesiska förenklad"
#~ msgid "Catalan"
#~ msgstr "Katalan"
#~ msgid "Dutch"
#~ msgstr "Nederländska"
#~ msgid "Bulgarian"
#~ msgstr "Bulgariska"
#, fuzzy
#~ msgid "Unable to find \"%s\" template config file."
#~ msgstr "Kunde inte skapa netlistfil"
#, fuzzy
#~ msgid "Error copying project file template"
#~ msgstr "Skapa ett nytt projekt från en mall"
#, fuzzy
#~ msgid "Show the current footprint in the footprint viewer"
#~ msgstr "Öppna filen i en textredigerare"
#, fuzzy
#~ msgid "Drawing Options"
#~ msgstr "Allmäna inställningar"
#, fuzzy
#~ msgid "Show pad &numbers"
#~ msgstr "Visa pinnar"
#, fuzzy
#~ msgid "Auto-zoom"
#~ msgstr "autozooma"
#, fuzzy
#~ msgid "Set units to millimeters"
#~ msgstr "millimeter"
#, fuzzy
#~ msgid "&Save Schematic\tCtrl+S"
#~ msgstr "&Spara nuvarande bibliotek\tCtrl+S"
#, fuzzy
#~ msgid "&Configure Paths..."
#~ msgstr "Konfiguration"
#, fuzzy
#~ msgid "Open CvPcb Manual"
#~ msgstr "Öppna manualen för cvpcb"
#, fuzzy
#~ msgid "Plugin nickname:"
#~ msgstr "Bibliotek <"
#~ msgid "Add Plugin"
#~ msgstr "Lägg till insticksmodul"
#, fuzzy
#~ msgid "Aliases:"
#~ msgstr "Alias"
#, fuzzy
#~ msgid "Add alias"
#~ msgstr "Lägg till linjer"
#, fuzzy
#~ msgid "Delete alias"
#~ msgstr "Radera via"
#, fuzzy
#~ msgid "Alias description:"
#~ msgstr "Beskrivning"
#, fuzzy
#~ msgid "Library reference is not valid."
#~ msgstr "Filnamnet är inte giltigt!"
#, fuzzy
#~ msgid "Library Reference:"
#~ msgstr "Nytt bibliotek"
#, fuzzy
#~ msgid "Browse library"
#~ msgstr "Bibliotek"
#, fuzzy
#~ msgid "Error List:"
#~ msgstr "Fel"
#, fuzzy
#~ msgid "Label to Label Connections"
#~ msgstr "Ändra allmäna inställningar"
#, fuzzy
#~ msgid "General Settings:"
#~ msgstr "Allmäna inställningar"
#~ msgid "&Run Simulator"
#~ msgstr "&Kör simulator"
#, fuzzy
#~ msgid "Generate Netlist"
#~ msgstr "Generera nätlista"
#, fuzzy
#~ msgid "Add Plugin..."
#~ msgstr "Lägg till insticksmodul"
#~ msgid "&Grid size:"
#~ msgstr "Storlek på rutnät:"
#, fuzzy
#~ msgid "Failed to save \"%s\""
#~ msgstr "Kunde inte skapa '%s'"
#, fuzzy
#~ msgid "field %s"
#~ msgstr "Fält "
#, fuzzy
#~ msgid "Find symbols and text"
#~ msgstr "Sök och ersätt text"
#, fuzzy
#~ msgid "Place net label"
#~ msgstr "Placera text"
#, fuzzy
#~ msgid "Annotate schematic symbols"
#~ msgstr "Annotera schema komponenter"
#, fuzzy
#~ msgid "Add lines and polygons to symbol body"
#~ msgstr "Lägg till linjer och polygoner"
#, fuzzy
#~ msgid "Zoom Center"
#~ msgstr "Centrera"
#, fuzzy
#~ msgid "Zoom Redraw"
#~ msgstr "Rita om"
#, fuzzy
#~ msgid "Add Graphic PolyLine"
#~ msgstr "Grafisk linje"
#, fuzzy
#~ msgid "Add Graphic Text"
#~ msgstr "Grafisk text"
#, fuzzy
#~ msgid "Orient Normal Component"
#~ msgstr "Orientera komponent"
#, fuzzy
#~ msgid "Edit Item"
#~ msgstr "Ändra nät"
#, fuzzy
#~ msgid "Move Schematic Item"
#~ msgstr "Nytt schema"
#, fuzzy
#~ msgid "Move Library Item"
#~ msgstr "Nytt bibliotek"
#, fuzzy
#~ msgid "Field %s \"%s\""
#~ msgstr "Kunde inte skapa '%s'"
#, fuzzy
#~ msgid "Failed to save backup document to file "
#~ msgstr "Kunde inte öppna filen "
#, fuzzy
#~ msgid "&Paste"
#~ msgstr "Klistra in"
#, fuzzy
#~ msgid "Pastes copied item(s)"
#~ msgstr "Radera markerade"
#, fuzzy
#~ msgid "Drag Arc Edge"
#~ msgstr "Flytta rektangel kant"
#, fuzzy
#~ msgid "Edit Circle Options..."
#~ msgstr "Cirkelegenskaper"
#~ msgid "Move Rectangle"
#~ msgstr "Flytta rektangel"
#, fuzzy
#~ msgid "Edit Rectangle Options..."
#~ msgstr "Ändra rektangelegenskaper"
#~ msgid "Cancel Block"
#~ msgstr "Avbryt block"
#, fuzzy
#~ msgid "Cut Block"
#~ msgstr "Kopiera block"
#~ msgid "Copy Block"
#~ msgstr "Kopiera block"
#, fuzzy
#~ msgid "Duplicate Block"
#~ msgstr "Duplicera"
#~ msgid "Delete Block"
#~ msgstr "Radera block"
#~ msgid "No component"
#~ msgstr "Ingen komponent"
#, fuzzy
#~ msgid "Creates an empty library"
#~ msgstr "Skapa en ny mapp"
#, fuzzy
#~ msgid "Save &As..."
#~ msgstr "&Spara som..."
#, fuzzy
#~ msgid "Save all library and symbol changes"
#~ msgstr "Spara allt"
#, fuzzy
#~ msgid "&Revert"
#~ msgstr "Aldrig"
#, fuzzy
#~ msgid "&Export Symbol..."
#~ msgstr "Exportera kretskort"
#~ msgid "&Undo"
#~ msgstr "Ångra"
#~ msgid "&Redo"
#~ msgstr "Återställ"
#~ msgid "Redo the last undo command"
#~ msgstr "Gör om senaste ångra-kommandot"
#, fuzzy
#~ msgid "&Properties..."
#~ msgstr "Egenskaper"
#, fuzzy
#~ msgid "Grid Settings..."
#~ msgstr "Sidinställningar"
#, fuzzy
#~ msgid "&Imperial"
#~ msgstr "&Importera"
#~ msgid "&Pin"
#~ msgstr "&Pinne"
#~ msgid "&Circle"
#~ msgstr "&Cirkel"
#~ msgid "&Arc"
#~ msgstr "&Båge"
#, fuzzy
#~ msgid "Create new symbol"
#~ msgstr "Skapa ett nytt projekt"
#~ msgid "Turn grid off"
#~ msgstr "Dölj rutnät"
#, fuzzy
#~ msgid "Symbol Library &Browser"
#~ msgstr "Bibliotek <"
#, fuzzy
#~ msgid "Return to parent schematic sheet"
#~ msgstr "Skriv ut schemablad"
#~ msgid "&Junction"
#~ msgstr "&Korsning"
#~ msgid "&Label"
#~ msgstr "&Etikett"
#~ msgid "Hierarchical Pi&n to Sheet"
#~ msgstr "Hierarkisk pi&nne till blad"
#, fuzzy
#~ msgid "&Graphic Text"
#~ msgstr "Grafisk text"
#, fuzzy
#~ msgid "&Image"
#~ msgstr "Bild"
#, fuzzy
#~ msgid "Start new schematic root sheet"
#~ msgstr "Skriv ut schemablad"
#, fuzzy
#~ msgid "Open recently opened schematic"
#~ msgstr "Öppna senaste schemaprojekt"
#, fuzzy
#~ msgid "Save &Current Sheet"
#~ msgstr "Spara aktivt blad"
#~ msgid "&Import"
#~ msgstr "&Importera"
#~ msgid "E&xport"
#~ msgstr "E&xportera"
#, fuzzy
#~ msgid "Close Eeschema"
#~ msgstr "Starta Eeschema"
#, fuzzy
#~ msgid "&Copy"
#~ msgstr "Kopiera"
#~ msgid "&Delete"
#~ msgstr "&Radera"
#, fuzzy
#~ msgid "&Find..."
#~ msgstr "&Sök"
#, fuzzy
#~ msgid "Find and Re&place..."
#~ msgstr "Sök och &ersätt"
#~ msgid "Run Pcbnew"
#~ msgstr "Starta Pcbnew"
#, fuzzy
#~ msgid "Generate &Netlist File..."
#~ msgstr "Generera &nätlista"
#, fuzzy
#~ msgid "Generate netlist file"
#~ msgstr "Generera &nätlista"
#, fuzzy
#~ msgid "Generate Bill of &Materials..."
#~ msgstr "Generera stycklista"
#, fuzzy
#~ msgid "Open Eeschema Manual"
#~ msgstr "Öppna eeschema-manualen"
#, fuzzy
#~ msgid "Configure Pa&ths..."
#~ msgstr "Konfiguration"
#, fuzzy
#~ msgid "&Save Project File..."
#~ msgstr "Spara &projektfiler"
#, fuzzy
#~ msgid "Save project preferences into a project file"
#~ msgstr "Spara och zippa alla projektfiler"
#, fuzzy
#~ msgid "Load P&roject File..."
#~ msgstr "Spara &projektfiler"
#, fuzzy
#~ msgid "Edit Text..."
#~ msgstr "Redigera text"
#, fuzzy
#~ msgid "Edit Label..."
#~ msgstr "Redigera etikett"
#, fuzzy
#~ msgid "Edit Global Label..."
#~ msgstr "Gl&obal etikett"
#, fuzzy
#~ msgid "Edit Hierarchical Label..."
#~ msgstr "&Hierarkisk etikett"
#, fuzzy
#~ msgid "Edit Image..."
#~ msgstr "Redigera etikett"
#~ msgid "Move Field"
#~ msgstr "Flytta fält"
#, fuzzy
#~ msgid "Edit Footprint Field..."
#~ msgstr "Redigera fält"
#, fuzzy
#~ msgid "Edit Field..."
#~ msgstr "Redigera fält"
#, fuzzy
#~ msgid "Move %s"
#~ msgstr "Flytta"
#, fuzzy
#~ msgid "Open Documentation"
#~ msgstr "Öppna schema"
#, fuzzy
#~ msgid "Edit Properties..."
#~ msgstr "Rutnäts egenskaper"
#~ msgid "Delete Junction"
#~ msgstr "Ta bort korsning"
#, fuzzy
#~ msgid "Add Label..."
#~ msgstr "Lägg till etikett"
#, fuzzy
#~ msgid "Add Global Label..."
#~ msgstr "Lägg till global etikett"
#, fuzzy
#~ msgid "Place"
#~ msgstr "&Placera"
#, fuzzy
#~ msgid ""
#~ "Save changes to\n"
#~ "\"%s\"\n"
#~ "before closing?"
#~ msgstr "Spara ändringarna före stängning?"
#, fuzzy
#~ msgid "reference field"
#~ msgstr "&Inställningar"
#, fuzzy
#~ msgid "value field"
#~ msgstr "Flytta fält"
#~ msgid "Add lines"
#~ msgstr "Lägg till linjer"
#, fuzzy
#~ msgid "Library:Symbol"
#~ msgstr "Bibliotek: "
#, fuzzy
#~ msgid "Show &grid"
#~ msgstr "Visa rutnät"
#, fuzzy
#~ msgid "New schematic"
#~ msgstr "Nytt schema"
#, fuzzy
#~ msgid "Save (all sheets)"
#~ msgstr "Spara allt"
#, fuzzy
#~ msgid "Leave sheet"
#~ msgstr "Lägg till blad"
#~ msgid "Generate netlist"
#~ msgstr "Generera nätlista"
#~ msgid "Cl&ose"
#~ msgstr "Stäng"
#~ msgid "&About Eeschema"
#~ msgstr "&Om Eeschema"
#, fuzzy
#~ msgid "&New Library..."
#~ msgstr "Nytt bibliotek"
#, fuzzy
#~ msgid "&Add Library..."
#~ msgstr "Bibliotek"
#, fuzzy
#~ msgid "E&xport Symbol..."
#~ msgstr "Exportera kretskort"
#~ msgid "Zoom "
#~ msgstr "Zooma "
#, fuzzy
#~ msgid "DCodes Display Mode"
#~ msgstr "3D-perspektiv"
#~ msgid "&Close"
#~ msgstr "&Stäng"
#, fuzzy
#~ msgid "Close GerbView"
#~ msgstr "Starta Gerbview"
#, fuzzy
#~ msgid "Zoom to fit"
#~ msgstr "Zooma "
#, fuzzy
#~ msgid "Show &DCodes"
#~ msgstr "Visa zoner"
#, fuzzy
#~ msgid "Show Normal Mode"
#~ msgstr "Visa inget"
#, fuzzy
#~ msgid "Gerbview &Manual"
#~ msgstr "Öppna gerbview-manualen"
#, fuzzy
#~ msgid "Open the GerbView Manual"
#~ msgstr "Öppna gerbview-manualen"
#~ msgid "Clear all layers"
#~ msgstr "Rensa alla lager"
#~ msgid " >>Error\n"
#~ msgstr ">>Fel\n"
#, fuzzy
#~ msgid "Refresh Project Tree"
#~ msgstr "Uppdatera projektträd"
#~ msgid "Run Eeschema"
#~ msgstr "Starta Eeschema"
#, fuzzy
#~ msgid "Run LibEdit"
#~ msgstr "Pinn-egenskaper"
#, fuzzy
#~ msgid "Run FpEditor"
#~ msgstr "&Redigerare"
#~ msgid "Run Gerbview"
#~ msgstr "Starta Gerbview"
#, fuzzy
#~ msgid "Run PcbCalculator"
#~ msgstr "&Kör simulator"
#, fuzzy
#~ msgid "Run PlEditor"
#~ msgstr "&Redigerare"
#, fuzzy
#~ msgid "Open Project"
#~ msgstr "&Öppna projekt"
#, fuzzy
#~ msgid "&Project..."
#~ msgstr "&Projekt"
#~ msgid "&New"
#~ msgstr "&Ny"
#~ msgid "Create new project"
#~ msgstr "Skapa ett nytt projekt"
#, fuzzy
#~ msgid "Close KiCad"
#~ msgstr "Stäng"
#~ msgid "Refresh project tree"
#~ msgstr "Uppdatera projektträd"
#, fuzzy
#~ msgid "&List Hotkeys"
#~ msgstr "Snabbtangenter"
#~ msgid "&Browse"
#~ msgstr "&Bläddra"
#~ msgid "&Delete File"
#~ msgstr "&Radera fil"
#, fuzzy
#~ msgid "Page 1 option:"
#~ msgstr "Spara inställningar"
#, fuzzy
#~ msgid "Vertical align:"
#~ msgstr "Vertikalt"
#, fuzzy
#~ msgid "Move Start Point"
#~ msgstr "Flytta pinne"
#, fuzzy
#~ msgid "Move End Point"
#~ msgstr "Flytta pinne"
#, fuzzy
#~ msgid "Save current page layout design file"
#~ msgstr "Spara aktuellt lager som..."
#, fuzzy
#~ msgid "Print Pre&view..."
#~ msgstr "Förhands&granska"
#, fuzzy
#~ msgid "&Background Black"
#~ msgstr "Bakgrundsfärg:"
#, fuzzy
#~ msgid "Hide &Grid"
#~ msgstr "Dölj rutnät"
#, fuzzy
#~ msgid "&Line..."
#~ msgstr "&Linje"
#, fuzzy
#~ msgid "&Rectangle..."
#~ msgstr "&Rektangel"
#, fuzzy
#~ msgid "&Text..."
#~ msgstr "Text"
#, fuzzy
#~ msgid "Open the Page Layout Editor Manual"
#~ msgstr "Öppna filen i en textredigerare"
#, fuzzy
#~ msgid "Add Line..."
#~ msgstr "Lägg till linje"
#, fuzzy
#~ msgid "Add Rectangle..."
#~ msgstr "Lägg till rektangel"
#, fuzzy
#~ msgid "Add Text..."
#~ msgstr "Lägg till text"
#, fuzzy
#~ msgid "Design"
#~ msgstr "Design regler"
#, fuzzy
#~ msgid "Auto-place selected components"
#~ msgstr "Radera komponent"
#, fuzzy
#~ msgid "Symbol %s pad %s not found in footprint %s.\n"
#~ msgstr "Komponenten [%s] hittades inte"
#~ msgid "Virtual"
#~ msgstr "Virtuell"
#, fuzzy
#~ msgid "Import Settings..."
#~ msgstr "Sidinställningar"
#, fuzzy
#~ msgid "Delete &dangling tracks"
#~ msgstr "Radera spår"
#, fuzzy
#~ msgid "Create report file:"
#~ msgstr "Skapa ny fil:"
#, fuzzy
#~ msgid "Board side:"
#~ msgstr "Rutnätsstorlek"
#, fuzzy
#~ msgid "Library reference:"
#~ msgstr "Nytt bibliotek"
#, fuzzy
#~ msgid "Center Y:"
#~ msgstr "Centrera"
#, fuzzy
#~ msgid "Re-associate footprints by reference"
#~ msgstr "Spara inställningar"
#, fuzzy
#~ msgid "Delete single-pad nets"
#~ msgstr "Radera markerade"
#, fuzzy
#~ msgid "side and rotation"
#~ msgstr "Rotera spår"
#, fuzzy
#~ msgid "V&alue:"
#~ msgstr "Värde:"
#, fuzzy
#~ msgid "Legacy Toolset Routing Options"
#~ msgstr "Linjeegenskaper"
#, fuzzy
#~ msgid "Auto-delete old tracks"
#~ msgstr "Radera spår"
#, fuzzy
#~ msgid "PCB thickness:"
#~ msgstr "Storlek på rutnät:"
#, fuzzy
#~ msgid "Mask_Back_layer"
#~ msgstr "kopparlager"
#, fuzzy
#~ msgid "Eco1_layer"
#~ msgstr "kopparlager"
#, fuzzy
#~ msgid "Eco2_layer"
#~ msgstr "kopparlager"
#, fuzzy
#~ msgid "Comments_layer"
#~ msgstr "Kommentarer "
#, fuzzy
#~ msgid "Drawings_layer"
#~ msgstr "Skriv ut kretskort"
#, fuzzy
#~ msgid "dPair Width"
#~ msgstr "Bredd"
#, fuzzy
#~ msgid "Pad too close to pad"
#~ msgstr "Kopiera 3D bild till urklipp"
#, fuzzy
#~ msgid "Add footprint"
#~ msgstr "Lägg till pinne"
#~ msgid "Adjust grid origin"
#~ msgstr "Justera rutnäts origo"
#, fuzzy
#~ msgid "Warning: unable to create backup file \"%s\""
#~ msgstr "Kunde inte skapa filen "
#, fuzzy
#~ msgid "Save changes to footprint before closing?"
#~ msgstr "Spara ändringarna före stängning?"
#, fuzzy
#~ msgid "Move Block Exactly..."
#~ msgstr "Flytta block"
#, fuzzy
#~ msgid "Edit Pad..."
#~ msgstr "Redigera pinne"
#~ msgid "Place anchor"
#~ msgstr "Placera ankare"
#, fuzzy
#~ msgid "Footprint already exists on board."
#~ msgstr "Filnamnet är inte giltigt!"
#, fuzzy
#~ msgid "Save a Copy &As..."
#~ msgstr "Spara kopia som..."
#, fuzzy
#~ msgid "&Create Footprint from Wizard..."
#~ msgstr "&Nuvarande bilbiotek"
#, fuzzy
#~ msgid "E&xport Footprint..."
#~ msgstr "Redigera fält"
#, fuzzy
#~ msgid "Redraw screen"
#~ msgstr "Rita om"
#, fuzzy
#~ msgid "Delete Track Segment"
#~ msgstr "Radera segment"
#, fuzzy
#~ msgid "Add New Track"
#~ msgstr "Slutför bana"
#, fuzzy
#~ msgid "Add MicroVia"
#~ msgstr "Placera mikrovia"
#, fuzzy
#~ msgid "Flip Item"
#~ msgstr "Vänd"
#, fuzzy
#~ msgid "Move Item Exactly"
#~ msgstr "Flytta text"
#, fuzzy
#~ msgid "Copy Item"
#~ msgstr "Kopiera"
#, fuzzy
#~ msgid "Place DXF"
#~ msgstr "&Placera"
#, fuzzy
#~ msgid "Set Grid Origin"
#~ msgstr "Rutnäts origo"
#, fuzzy
#~ msgid "Select Connected Tracks"
#~ msgstr "Radera spår?"
#, fuzzy
#~ msgid "Routing Options"
#~ msgstr "Linjeegenskaper"
#, fuzzy
#~ msgid "Not Handled Items"
#~ msgstr "Rotera +"
#, fuzzy
#~ msgid "Export View as PN&G..."
#~ msgstr "Snabbtangenter"
#, fuzzy
#~ msgid "Edit default pad properties"
#~ msgstr "Redigera komponentegenskaper"
#, fuzzy
#~ msgid "Footprint &Library Browser"
#~ msgstr "Bibliotek <"
#~ msgid "&3D Viewer"
#~ msgstr "&3D visare"
#, fuzzy
#~ msgid "Grid &Settings..."
#~ msgstr "Sidinställningar"
#~ msgid "&Line"
#~ msgstr "&Linje"
#, fuzzy
#~ msgid "&Polygon"
#~ msgstr "Polygoner:"
#, fuzzy
#~ msgid "Add graphic polygon"
#~ msgstr "Lägg till linjer och polygoner"
#~ msgid "&Grid Origin"
#~ msgstr "Rutnäts origo"
#, fuzzy
#~ msgid "Open the Pcbnew Manual"
#~ msgstr "Öppna pcbnew-manualen"
#, fuzzy
#~ msgid "&Single Track"
#~ msgstr "Radera bana"
#~ msgid "&List Nets"
#~ msgstr "&Lista nät"
#, fuzzy
#~ msgid "Add via"
#~ msgstr "Lägg till bild"
#, fuzzy
#~ msgid "Add filled zone"
#~ msgstr "Lägg till zoner"
#, fuzzy
#~ msgid "&Autoplace selected components"
#~ msgstr "Autoplacera alla moduler"
#, fuzzy
#~ msgid "Fill &All Zones"
#~ msgstr "Lås upp alla moduler"
#, fuzzy
#~ msgid "&Unfill All Zones"
#~ msgstr "Lås upp alla moduler"
#, fuzzy
#~ msgid "Create new board"
#~ msgstr "Skapa ett nytt projekt"
#~ msgid "Open existing board"
#~ msgstr "Öppna befintligt kretskort"
#, fuzzy
#~ msgid "Open recently opened board"
#~ msgstr "Öppna senaste nätlista"
#~ msgid "Sa&ve As..."
#~ msgstr "Spara som..."
#, fuzzy
#~ msgid "Save copy of the current board"
#~ msgstr "Spara nuvarande aktiva kretskort"
#, fuzzy
#~ msgid "Close Pcbnew"
#~ msgstr "&Om Pcbnew"
#~ msgid "Export GenCAD format"
#~ msgstr "Exportera GenCAD format"
#, fuzzy
#~ msgid "STEP export"
#~ msgstr "Exportera"
#~ msgid "Place Micro Via"
#~ msgstr "Placera mikrovia"
#~ msgid "Delete Segment"
#~ msgstr "Radera segment"
#~ msgid "Locked: No"
#~ msgstr "Låst: Nej"
#, fuzzy
#~ msgid "Move Corner"
#~ msgstr "Ta bort"
#, fuzzy
#~ msgid "Delete Corner"
#~ msgstr "Radera zon"
#, fuzzy
#~ msgid "PCB Cursor"
#~ msgstr "Muspekare"
#, fuzzy
#~ msgid "Added a track"
#~ msgstr "Slutför bana"
#, fuzzy
#~ msgid "Redo last undo command"
#~ msgstr "Gör om senaste ångra-kommandot"
#, fuzzy
#~ msgid "Default pad properties"
#~ msgstr "Modulegenskaper"
#~ msgid "&About Pcbnew"
#~ msgstr "&Om Pcbnew"
#~ msgid "About Pcbnew PCB designer"
#~ msgstr "Om Pcbnew PCB designer"
#~ msgid "New board"
#~ msgstr "Nytt kretskort"
#, fuzzy
#~ msgid "Add vias"
#~ msgstr "Lägg till pinnar"
#, fuzzy
#~ msgid "Add zone cutout"
#~ msgstr "Lägg till zoner"
#, fuzzy
#~ msgid "Add similar zone"
#~ msgstr "Lägg till zoner"
#, fuzzy
#~ msgid "Add Stub (Arc)"
#~ msgstr "Lägg till båge"
#, fuzzy
#~ msgid "Pick Components for Local Ratsnest"
#~ msgstr "cvpcb (Komponenter till moduler)"
#, fuzzy
#~ msgid "Delete alias entry"
#~ msgstr "&Radera mapp"
#, fuzzy
#~ msgid "Move alias up"
#~ msgstr "Flytta pinne"
#, fuzzy
#~ msgid "Move alias down"
#~ msgstr "Flytta ner"
#, fuzzy
#~ msgid "Create zones of layer %s"
#~ msgstr "Skapa konfigurationsfil för snabbtangenter"
#~ msgid "Block Rotate"
#~ msgstr "Rotera block"
#~ msgid "Block Mirror"
#~ msgstr "Spegla block"
#, fuzzy
#~ msgid "Unselect All"
#~ msgstr "Radera alla"
#, fuzzy
#~ msgid "Add path prefix"
#~ msgstr "Lägg till text"
#, fuzzy
#~ msgid "Edit selected path prefix"
#~ msgstr "Visa markerad del"
#~ msgid "Save the changes before closing?"
#~ msgstr "Spara ändringarna före stängning?"
#~ msgid "Save and Exit"
#~ msgstr "Spara och avsluta"
#~ msgid "Warning!"
#~ msgstr "Varning!"
#, fuzzy
#~ msgid "Select show icons in menus and icons sizes"
#~ msgstr "Välj typsnitt och storlek"
#~ msgid "Pos "
#~ msgstr "Position"
#~ msgid "Y"
#~ msgstr "Y"
#, fuzzy
#~ msgid "&Edit Hotkeys..."
#~ msgstr "Snabbtangenter"
#, fuzzy
#~ msgid "Load existing hotkey configuration file"
#~ msgstr "Konfigurationfil för snabbtangenter"
#, fuzzy
#~ msgid "&Hotkeys Options"
#~ msgstr "Snabbtangenter"
#, fuzzy
#~ msgid "Edit hotkeys configuration and preferences"
#~ msgstr "Konfigurationfil för snabbtangenter"
#, fuzzy
#~ msgid "cannot open or save file \"%s\""
#~ msgstr "Kan inte spara fil <%s>"
#, fuzzy
#~ msgid "KiCad project files (*.pro)|*."
#~ msgstr "KiCad projektfil"
#, fuzzy
#~ msgid "Text files (*.txt)|*."
#~ msgstr "Textfil ("
#, fuzzy
#~ msgid "About KiCad"
#~ msgstr "&Om KiCad"
#, fuzzy
#~ msgid "Failed to open file \"%s\""
#~ msgstr "Kunde inte öppna filen "
#, fuzzy
#~ msgid "Plugin Information:"
#~ msgstr "Information"
#, fuzzy
#~ msgid "Alias List:"
#~ msgstr "Alias"
#~ msgid "Delete All"
#~ msgstr "Radera alla"
#~ msgid "Fields:"
#~ msgstr "Fält:"
#, fuzzy
#~ msgid "Create new custom field"
#~ msgstr "Skapa ny txt-fil"
#, fuzzy
#~ msgid "S&hape:"
#~ msgstr "3D-figur:"
#, fuzzy
#~ msgid "&Show grid"
#~ msgstr "Visa rutnät"
#, fuzzy
#~ msgid "De&lete"
#~ msgstr "Radera"
#, fuzzy
#~ msgid "Pin Pos X:"
#~ msgstr "Pin nummer:"
#, fuzzy
#~ msgid "Pin Pos Y:"
#~ msgstr "Pin nummer:"
#, fuzzy
#~ msgid "General Options:"
#~ msgstr "Allmäna inställningar"
#, fuzzy
#~ msgid "Save All Libraries"
#~ msgstr "Bibliotek"
#, fuzzy
#~ msgid "Save All &Libraries"
#~ msgstr "Bibliotek"
#, fuzzy
#~ msgid "General &Options"
#~ msgstr "Allmäna inställningar"
#, fuzzy
#~ msgid "Create S&VG File..."
#~ msgstr "Skapa S&VG fil"
#, fuzzy
#~ msgid "Create a new empty symbol"
#~ msgstr "Skapa ny txt-fil"
#, fuzzy
#~ msgid "&Fields..."
#~ msgstr "Fält"
#, fuzzy
#~ msgid "Export symbol"
#~ msgstr "Exportera kretskort"
#, fuzzy
#~ msgid "Revert Library"
#~ msgstr "Välj bibliotek"
#~ msgid "There was a problem printing"
#~ msgstr "Ett problem uppstod vid utskrift"
#, fuzzy
#~ msgid "Graphic layers:"
#~ msgstr "Grafisk linje"
#~ msgid "Scale 0.5"
#~ msgstr "Skala 0.5"
#~ msgid "Scale 0.7"
#~ msgstr "Skala 0.7"
#~ msgid "Scale 1.4"
#~ msgstr "Skala 1.4"
#~ msgid "Scale 4"
#~ msgstr "Skala 4"
#, fuzzy
#~ msgid "Lines:"
#~ msgstr "Linjer"
#~ msgid "Polygons:"
#~ msgstr "Polygoner:"
#, fuzzy
#~ msgid "Gerbview Options"
#~ msgstr "Linjeegenskaper"
#, fuzzy
#~ msgid "&Options"
#~ msgstr "Inställningar"
#, fuzzy
#~ msgid "Set options to draw items"
#~ msgstr "Välj komponent (%d st)"
#, fuzzy
#~ msgid "Select your preferred text editor"
#~ msgstr "Öppna textredigerare"
#, fuzzy
#~ msgid "&Set Text Editor..."
#~ msgstr "Ställ in textredigerare"
#, fuzzy
#~ msgid "&Favorite PDF Viewer"
#~ msgstr "PDF visare"
#, fuzzy
#~ msgid "Set &PDF Viewer..."
#~ msgstr "PDF visare"
#~ msgid "&PDF Viewer"
#~ msgstr "PDF visare"
#, fuzzy
#~ msgid "Run PCB Calculator"
#~ msgstr "&Kör simulator"
#, fuzzy
#~ msgid "Save changes in a new file before closing?"
#~ msgstr "Spara ändringarna före stängning?"
#, fuzzy
#~ msgid "Print SVG Options:"
#~ msgstr "Linjeegenskaper"
#, fuzzy
#~ msgid "Settings:"
#~ msgstr "Sidinställningar"
#, fuzzy
#~ msgid "Routing Options:"
#~ msgstr "Linjeegenskaper"
#, fuzzy
#~ msgid "Local Settings:"
#~ msgstr "Sidinställningar"
#, fuzzy
#~ msgid "3D Shape Name:"
#~ msgstr "3D-figur:"
#~ msgid "Add 3D Shape"
#~ msgstr "Lägg till 3d-figur"
#~ msgid "Remove 3D Shape"
#~ msgstr "Radera 3d-figur"
#, fuzzy
#~ msgid "Document link:"
#~ msgstr "Dokument"
#, fuzzy
#~ msgid "** Could not create file \"%s\" ***\n"
#~ msgstr "Kunde inte skapa filen "
#, fuzzy
#~ msgid "Default Via Drill:"
#~ msgstr "Standardsökväg för bibliotek:"
#, fuzzy
#~ msgid "&Show ratsnest"
#~ msgstr "Visa zoner"
#~ msgid "History list:"
#~ msgstr "Historik:"
#~ msgid "Search by Keyword"
#~ msgstr "Sök efter nyckelord"
#~ msgid "List All"
#~ msgstr "Visa alla"
#, fuzzy
#~ msgid "&Text line width:"
#~ msgstr "Text bredd:"
#, fuzzy
#~ msgid "Text &height:"
#~ msgstr "Text höjd:"
#, fuzzy
#~ msgid "Text &width:"
#~ msgstr "Text bredd:"
#, fuzzy
#~ msgid "Current position"
#~ msgstr "Nuvarande"
#, fuzzy
#~ msgid "Zone Edge Orientation:"
#~ msgstr "Rotera zon"
#, fuzzy
#~ msgid "Polygon:"
#~ msgstr "Polygoner:"
#, fuzzy
#~ msgid "polygon"
#~ msgstr "Polygoner:"
#, fuzzy
#~ msgid "1.0"
#~ msgstr "180"
#, fuzzy
#~ msgid "Select Anchor Position"
#~ msgstr "Ändra allmäna inställningar"
#, fuzzy
#~ msgid "Generic Options:"
#~ msgstr "Allmäna inställningar"
#, fuzzy
#~ msgid "Pads Drill Options:"
#~ msgstr "Visningsalternativ"
#, fuzzy
#~ msgid "Page Print:"
#~ msgstr "Sidstorlek:"
#, fuzzy
#~ msgid "Common:"
#~ msgstr "Kommentar1:"
#, fuzzy
#~ msgid "Modified dimensions properties"
#~ msgstr "Modulegenskaper"
#, fuzzy
#~ msgid "Apply Pad Properties"
#~ msgstr "Rutnäts egenskaper"
#, fuzzy
#~ msgid "Library Filter:"
#~ msgstr "Bibliotek <"
#, fuzzy
#~ msgid "Center of page"
#~ msgstr "Centrera"
#, fuzzy
#~ msgid "Set Acti&ve Library..."
#~ msgstr "Välj bibliotek"
#, fuzzy
#~ msgid "&Active Library..."
#~ msgstr "Välj bibliotek"
#, fuzzy
#~ msgid "Export active library"
#~ msgstr "Spara det nuvarande aktiva biblioteket"
#, fuzzy
#~ msgid "P&roperties..."
#~ msgstr "Egenskaper"
#, fuzzy
#~ msgid "General &Settings..."
#~ msgstr "Allmäna inställningar"
#, fuzzy
#~ msgid "&Display Options..."
#~ msgstr "&Visningsalternativ"
#, fuzzy
#~ msgid "&General Settings"
#~ msgstr "Allmäna inställningar"
#, fuzzy
#~ msgid "Set Active Library..."
#~ msgstr "Välj bibliotek"
#, fuzzy
#~ msgid "Whole Net"
#~ msgstr "Radera nät"
#~ msgid " in"
#~ msgstr "tum"
#~ msgid " mm"
#~ msgstr "mm"
#~ msgid "Block Save"
#~ msgstr "Spara block"
#~ msgid "The original site of the initiator of Kicad"
#~ msgstr "Den ursprungliga sidan från skaparen av KiCad"
#~ msgid "Report bugs if you found any"
#~ msgstr "Rapportera buggar om du hittar några"
#~ msgid "File an idea for improvement"
#~ msgstr "Ge förslag på förbättringar"
#~ msgid "&Open Netlist"
#~ msgstr "&Öppna nätlista"
#~ msgid "Quit CvPcb"
#~ msgstr "Avsluta CvPcb"
#~ msgid "Show gr&id"
#~ msgstr "Visa rutnät"
#~ msgid "Move Arc"
#~ msgstr "Flytta båge"
#~ msgid "Delete Arc"
#~ msgstr "Ta bort båge"
#~ msgid "Move Circle"
#~ msgstr "Flytta cirkel"
#~ msgid "Delete Circle"
#~ msgstr "Ta bort cirkel"
#~ msgid "Rotate Text"
#~ msgstr "Rotera text"
#~ msgid "Delete Text"
#~ msgstr "Radera text"
#~ msgid "Mirror Block ||"
#~ msgstr "Spegla block ||"
#~ msgid "Mirror Block --"
#~ msgstr "Spegla block --"
#~ msgid "Rotate Block ccw"
#~ msgstr "Rotera block motsols"
#~ msgid "Confirm"
#~ msgstr "Bekräfta"
#~ msgid "Pri&nt"
#~ msgstr "Skriv &ut"
#~ msgid "&Plot"
#~ msgstr "&Plotta"
#~ msgid "Quit Eeschema"
#~ msgstr "Avsluta Eeschema"
#~ msgid "&Component"
#~ msgstr "&Komponent"
#~ msgid "Save application preferences"
#~ msgstr "Spara programinställningar"
#~ msgid "&Contents"
#~ msgstr "&Innehåll"
#~ msgid "Mirror --"
#~ msgstr "Spegla --"
#~ msgid "Mirror ||"
#~ msgstr "Spegla ||"
#~ msgid "Copy Component"
#~ msgstr "Kopiera komponent"
#~ msgid "Doc"
#~ msgstr "Dokumentation"
#~ msgid "Redo the last command"
#~ msgstr "Återställ sensate kommando"
#~ msgid "Save schematic project"
#~ msgstr "Spara schemaprojekt"
#~ msgid "&New Project"
#~ msgstr "&Nytt projekt"
#~ msgid "&Archive"
#~ msgstr "&Skapa arkiv"
#~ msgid "&Unarchive"
#~ msgstr "Öppna arkiv"
#~ msgid "&Rename file"
#~ msgstr "&Döp om fil"
#~ msgid "No Modules!"
#~ msgstr "Inga moduler!"
#~ msgid "Recording macro %d"
#~ msgstr "Spelar in makro %d"
#~ msgid "Macro %d recorded"
#~ msgstr "Makro %d inspelat"
#~ msgid "Call macro %d"
#~ msgstr "Anropa makro %d"
#~ msgid "Middle"
#~ msgstr "Mitten"
#~ msgid "Module"
#~ msgstr "Modul"
#~ msgid "Quit Pcbnew"
#~ msgstr "Avsluta Pcbnew"
#~ msgid "G&rid"
#~ msgstr "Rutnät"
#~ msgid "&Read macros"
#~ msgstr "&Läs in makron"
#~ msgid "Read macros from file"
#~ msgstr "Läs makron från fil"
#~ msgid "Ma&cros"
#~ msgstr "Ma&kron"
#~ msgid "&Netlist"
#~ msgstr "&Netlist"
#~ msgid "&FreeRoute"
#~ msgstr "&FreeRoute"
#~ msgid "Rotate -"
#~ msgstr "Rotera -"
#~ msgid "Change ALL modules ?"
#~ msgstr "Ändra ALLA moduler ?"
#~ msgid "About..."
#~ msgstr "Om..."
#~ msgid "key "
#~ msgstr "tangent "
#~ msgid "Unable to read "
#~ msgstr "Kunde inte läsa "
#~ msgid "Show Current Hotkey List"
#~ msgstr "Visa nuvarande snabbtangenter"
#~ msgid "Use home directory to load or store Hotkey config files"
#~ msgstr ""
#~ "Använd hemmappen för att ladda/spara konfiguration för snabbtangenter"
#~ msgid "Doc File "
#~ msgstr "Dokumentationen för "
#~ msgid " Cannot find the PDF viewer (xpdf, gpdf or konqueror) in /usr/bin/"
#~ msgstr ""
#~ " Kunde inte hitta PDF-läsare (xpdf, gpdf eller konqueror) i /usr/bin/"
#~ msgid " (\"):"
#~ msgstr " (\"):"
#~ msgid "Copper "
#~ msgstr "Koppar "
#~ msgid "--- "
#~ msgstr "--- "
#~ msgid "zoom + (F1)"
#~ msgstr "zooma + (F1)"
#~ msgid "zoom - (F2)"
#~ msgstr "zooma - (F2)"
#~ msgid "redraw (F3)"
#~ msgstr "rita om (F3)"
#~ msgid "Rotate X <-"
#~ msgstr "Rotera X <-"
#~ msgid "Rotate X ->"
#~ msgstr "Rotera X ->"
#~ msgid "Rotate Y <-"
#~ msgstr "Rotera Y <-"
#~ msgid "Rotate Y ->"
#~ msgstr "Rotera Y ->"
#~ msgid "Rotate Z <-"
#~ msgstr "Rotera Z <-"
#~ msgid "Rotate Z ->"
#~ msgstr "Rotera Z ->"
#~ msgid "Create Image (png format)"
#~ msgstr "Skapa bild (png-format)"
#~ msgid "Create Image (jpeg format)"
#~ msgstr "Skapa bild (jpeg-format)"
#, fuzzy
#~ msgid "Lib Dir:"
#~ msgstr "Biblioteksökväg"
#~ msgid "File <%s> not found"
#~ msgstr "Filen <%s> kunde inte hittas"
#~ msgid "Netlist error: %s"
#~ msgstr "Netlist fel: %s"
#~ msgid "Save Cfg"
#~ msgstr "Spara konf."
#~ msgid "Read Cfg"
#~ msgstr "Läs konf."
#~ msgid "Lib: "
#~ msgstr "Bibliotek: "
#~ msgid "Problem when saving files, Exit anyway"
#~ msgstr "Problem vid sparning av filer, Avsluta ändå"
#~ msgid "font for dialog boxes"
#~ msgstr "typsnitt för dialogrutor"
#~ msgid "font for Lists"
#~ msgstr "typsnitt för listor"
#~ msgid "font for Status Line"
#~ msgstr "typsnitt för statusraden"
#~ msgid "Choose font type and size for dialogs, infos and status box"
#~ msgstr "Välj typsnitt och storlek för dialog, info och statusrutor"
#~ msgid "1:1 zoom"
#~ msgstr "1:1 zoom"
#~ msgid "Open a NetList file"
#~ msgstr "Öppna NetList-fil"
#~ msgid "Display/print component documentation (footprint.pdf)"
#~ msgstr "Visa/skriv ut dokumentationen om komponenten (footprint.pdf)"
#, fuzzy
#~ msgid "Save New NetList and Components List files"
#~ msgstr "Spara ny NetList och komponentlista-filer"
#~ msgid "E&xit"
#~ msgstr "A&vsluta"
#~ msgid "About this application"
#~ msgstr "Om detta programmet"
#~ msgid "Netlist Format: Pcad"
#~ msgstr "Netlist-format: Pcad"
#~ msgid "Library: <%s> not found"
#~ msgstr "Bibliotek: <%s> kunde inte hittas"
#~ msgid "> is empty!"
#~ msgstr "> är tom!"
#~ msgid "zoom +"
#~ msgstr "zooma +"
#~ msgid "zoom -"
#~ msgstr "zooma -"
#~ msgid "redraw"
#~ msgstr "rita om"
#~ msgid "Display Grid OFF"
#~ msgstr "Rutnät AV"
#~ msgid "Units = Inch"
#~ msgstr "Enheter = tum"
#~ msgid "Units = mm"
#~ msgstr "Enheter = mm"
#~ msgid "Mirror !"
#~ msgstr "Spegla !"
#~ msgid "Add Component"
#~ msgstr "Lägg till komponent"
#~ msgid "Pin Orient:"
#~ msgstr "Pin orientering:"
#~ msgid "invert"
#~ msgstr "invertera"
#~ msgid "Save file "
#~ msgstr "Spara fil"
#~ msgid "ERC file:"
#~ msgstr "ERC fil:"
#~ msgid "Field 1"
#~ msgstr "Fält 1"
#~ msgid "Field 2"
#~ msgstr "Fält 2"
#~ msgid "Field 3"
#~ msgstr "Fält 3"
#~ msgid "Field 4"
#~ msgstr "Fält 4"
#~ msgid "Field 5"
#~ msgstr "Fält 5"
#~ msgid "Field 6"
#~ msgstr "Fält 6"
#~ msgid "Field 7"
#~ msgstr "Fält 7"
#~ msgid "Field 8"
#~ msgstr "Fält 8"
#~ msgid "Grid not show"
#~ msgstr "Dölj rutnät"
#~ msgid "No show Hidden Pins"
#~ msgstr "Visa inte dolda pinnar"
#~ msgid "Occupied by other pin. Continue?"
#~ msgstr "Upptagen av en annan pinne. Fortsätt?"
#~ msgid " Convert"
#~ msgstr " Konvertera"
#~ msgid "Anchor"
#~ msgstr "Ankare"
#~ msgid "Lengh"
#~ msgstr "Längd"
#~ msgid "A file named %s exists, load it ?"
#~ msgstr "En fil med namnet %s finns, ladda den?"
#~ msgid "Size "
#~ msgstr "Storlek "
#~ msgid "Void"
#~ msgstr "Tom"
#~ msgid "File %s not found (new project ?)"
#~ msgstr "Filen %s kunde inte hittas (nytt projekt ?)"
#~ msgid "Horiz/Vertical"
#~ msgstr "Horisontellt/Vertikalt"
#~ msgid "&1"
#~ msgstr "&1"
#~ msgid "&2"
#~ msgstr "&2"
#~ msgid "&4"
#~ msgstr "&4"
#~ msgid "&5"
#~ msgstr "&5"
#~ msgid "&6"
#~ msgstr "&6"
#~ msgid "&8"
#~ msgstr "&8"
#~ msgid "&9"
#~ msgstr "&9"
#~ msgid "&10"
#~ msgstr "&10"
#~ msgid "&11"
#~ msgstr "&11"
#~ msgid "&14"
#~ msgstr "&14"
#~ msgid "&15"
#~ msgstr "&15"
#~ msgid "&17"
#~ msgstr "&17"
#~ msgid "&18"
#~ msgstr "&18"
#~ msgid "&20"
#~ msgstr "&20"
#~ msgid "&21"
#~ msgstr "&21"
#~ msgid "&22"
#~ msgstr "&22"
#~ msgid "&23"
#~ msgstr "&23"
#~ msgid "&24"
#~ msgstr "&24"
#~ msgid "&25"
#~ msgstr "&25"
#~ msgid "&26"
#~ msgstr "&26"
#~ msgid "Left justify"
#~ msgstr "Vänsterjustera"
#~ msgid "Right justify"
#~ msgstr "Högerjustera"
#~ msgid "Eeschema is already running, Continue?"
#~ msgstr "Eeschema körs redan, fortsätt?"
#~ msgid "&Ok"
#~ msgstr "&Ok"
#~ msgid "-> Total Errors: "
#~ msgstr "-> Fel totalt: "
#~ msgid "-> Last Warnings: "
#~ msgstr "-> Senaste varningar: "
#~ msgid "-> Last Errors: "
#~ msgstr "-> Senaste fel: "
#~ msgid " Found in "
#~ msgstr "Hittad i "
#~ msgid " Not Found"
#~ msgstr "Inte hittad"
#~ msgid "Found "
#~ msgstr "Hittade "
#~ msgid "P&rint"
#~ msgstr "S&kriv ut"
#~ msgid "Plotting in HPGL format"
#~ msgstr "Plotta i HPGL-format"
#~ msgid "Plot SVG"
#~ msgstr "Plotta SVG"
#~ msgid "&Undo\t"
#~ msgstr "&Ångra\t"
#~ msgid "&Redo\t"
#~ msgstr "&Gör om\t"
#~ msgid "&Libs and Dir"
#~ msgstr "&Bibliotek och sökvägar"
#~ msgid "&Colors"
#~ msgstr "&Färger"
#~ msgid "Read application preferences"
#~ msgstr "Ladda programinställningar"
#~ msgid "No Field To Edit"
#~ msgstr "Inget fält att redigera"
#~ msgid "Display next part"
#~ msgstr "Visa nästa del"
#~ msgid "Export component:"
#~ msgstr "Exportera komponent:"
#~ msgid "Circle Delete"
#~ msgstr "Radera cirkel"
#~ msgid "Pin Delete"
#~ msgstr "Ta bort pinne"
#~ msgid "File "
#~ msgstr "Fil "
#~ msgid "Add circles"
#~ msgstr "Lägg till cirklar"
#~ msgid "Add arcs"
#~ msgstr "Lägg till bågar"
#~ msgid "export component"
#~ msgstr "exportera komponent"
#~ msgid "Rotate Label (R)"
#~ msgstr "Rotera etikett (R)"
#~ msgid "Rotate Text (R)"
#~ msgstr "Rotera text (R)"
#~ msgid ""
#~ "\n"
#~ "Create Zip Archive "
#~ msgstr ""
#~ "\n"
#~ "Skapa Zip-arkiv "
#~ msgid "&Open Project Descr"
#~ msgstr "&Öppna projektbeskrivning"
#~ msgid "Select an existing project descriptor"
#~ msgstr "Välj en existerande projektbeskrivning"
#~ msgid "Save current project descriptor"
#~ msgstr "Spara nuvarande projektbeskrivning"
#~ msgid "Quit Kicad"
#~ msgstr "Avsluta Kicad"
#~ msgid "&Select Editor"
#~ msgstr "&Välj redigerare"
#~ msgid "Select your prefered editor for file browsing"
#~ msgstr "Välj den redigerare du vill använda för filvisning"
#~ msgid "Select Pdf Viewer"
#~ msgstr "Välj Pdf-läsare"
#~ msgid "Open the kicad manual"
#~ msgstr "Öppna kicad-manualen"
#~ msgid "&Open the file in a Text Editor"
#~ msgstr "&Öppna filen i en textredigerare"
#~ msgid "New &File"
#~ msgstr "Ny &Fil"
#~ msgid "&Rename Directory"
#~ msgstr "&Döp om mapp"
#~ msgid "&Rename the Directory"
#~ msgstr "&Döp om mappen"
#~ msgid "You must choose a PDF viewer before use this option"
#~ msgstr "Du måste välja en PDF-läsare för att kunna använda denna funktion"
#~ msgid "pcbnew (PCB editor)"
#~ msgstr "pcbnew (PCB-redigerare)"
#~ msgid "Quit pcbnew"
#~ msgstr "Avsluta pcbnew"
#~ msgid "&3D Display"
#~ msgstr "&3D Display"
#~ msgid "Big"
#~ msgstr "Stor"
#~ msgid "Current Module"
#~ msgstr "Nuvarande modul"
#~ msgid "New Module"
#~ msgstr "Ny modul"
#~ msgid "Delete Zones ?"
#~ msgstr "Radera zoner ?"
#~ msgid "Delete Modules?"
#~ msgstr "Radera moduler?"
#~ msgid "Angle (0.1deg):"
#~ msgstr "Vinkel (0.1 grader)"
#~ msgid "Add Modules"
#~ msgstr "Lägg till moduler"
#~ msgid "Load module from lib"
#~ msgstr "Ladda modul från bibliotek"
#~ msgid "export module"
#~ msgstr "exportera modul"
#~ msgid "Pcbnew is already running, Continue?"
#~ msgstr "Pcbnew körs redan, fortsätt?"
#~ msgid "Duplicates"
#~ msgstr "Dubletter"
#~ msgid "Rot 90"
#~ msgstr "Rotera 90"
#~ msgid "Rot 180"
#~ msgstr "Rotera 180"
#~ msgid "Delete [%s]"
#~ msgstr "Radera [%s]"
#~ msgid "(Deselect)"
#~ msgstr "(Avmarkera)"
#~ msgid "X Pos"
#~ msgstr "X Pos"
#~ msgid "Y pos"
#~ msgstr "Y pos"
#~ msgid "Lock All Modules"
#~ msgstr "Lås all moduler"
#~ msgid "Move New Modules"
#~ msgstr "Flytta nya moduler"
#~ msgid "Autoplace Next Module"
#~ msgstr "Autoplacera nästa modul"
#~ msgid "Edit Track"
#~ msgstr "Ändra bana"
#~ msgid "Rotate +"
#~ msgstr "Rotera +"
#~ msgid "delete"
#~ msgstr "radera"
#~ msgid "Printer Problem!"
#~ msgstr "Problem med skrivare!"
#~ msgid "There was a problem previewing"
#~ msgstr "Ett problem uppstod vid förhandsgranskning"
#~ msgid "Size A1"
#~ msgstr "Storlek A1"
#~ msgid "Size A0"
#~ msgstr "Storlek A0"
#~ msgid "Size D"
#~ msgstr "Storlek D"
#~ msgid "Size E"
#~ msgstr "Storlek E"
#~ msgid "Based on wxWidgets "
#~ msgstr "Baserad på wxWidgets"
#~ msgid "Delete zones ?"
#~ msgstr "Radera zoner ?"
#~ msgid "Save Cfg..."
#~ msgstr "Spara konf."
#~ msgid "Layer modified, Continue ?"
#~ msgstr "Lager ändrat, fortsätt?"
#~ msgid "Save current layers (GERBER format)"
#~ msgstr "Spara nuvarande lager (GERBER-format)"
#~ msgid "Quit Gerbview"
#~ msgstr "Avsluta Gerbview"
#~ msgid "&Delete Layer"
#~ msgstr "&Radera lager"
#~ msgid "Length(inch):"
#~ msgstr "Längd(tum):"
#~ msgid "Length(mm):"
#~ msgstr "Längd(mm):"
#~ msgid "Layers 1-16"
#~ msgstr "Lager 1-16"
#~ msgid "Layer 2"
#~ msgstr "Lager 2"
#~ msgid "Layer 3"
#~ msgstr "Lager 3"
#~ msgid "Layer 4"
#~ msgstr "Lager 4"
#~ msgid "Layer 5"
#~ msgstr "Lager 5"
#~ msgid "Layer 6"
#~ msgstr "Lager 6"
#~ msgid "Layer 7"
#~ msgstr "Lager 7"
#~ msgid "Layer 8"
#~ msgstr "Lager 8"
#~ msgid "Layer 9"
#~ msgstr "Lager 9"
#~ msgid "Layer 10"
#~ msgstr "Lager 10"
#~ msgid "Layer 11"
#~ msgstr "Lager 11"
#~ msgid "Layer 12"
#~ msgstr "Lager 12"
#~ msgid "Layer 13"
#~ msgstr "Lager 13"
#~ msgid "Layer 14"
#~ msgstr "Lager 14"
#~ msgid "Layer 15"
#~ msgstr "Lager 15"
#~ msgid "Layer 16"
#~ msgstr "Lager 16"
#~ msgid "Layers 17-32"
#~ msgstr "Lager 17-32"
#~ msgid "Layer 17"
#~ msgstr "Lager 17"
#~ msgid "Layer 18"
#~ msgstr "Lager 18"
#~ msgid "Layer 19"
#~ msgstr "Lager 19"
#~ msgid "Layer 20"
#~ msgstr "Lager 20"
#~ msgid "Layer 21"
#~ msgstr "Lager 21"
#~ msgid "Layer 22"
#~ msgstr "Lager 22"
#~ msgid "Layer 23"
#~ msgstr "Lager 23"
#~ msgid "Layer 24"
#~ msgstr "Lager 24"
#~ msgid "Layer 25"
#~ msgstr "Lager 25"
#~ msgid "Layer 26"
#~ msgstr "Lager 26"
#~ msgid "Layer 27"
#~ msgstr "Lager 27"
#~ msgid "Layer 28"
#~ msgstr "Lager 28"
#~ msgid "Layer 29"
#~ msgstr "Lager 29"
#~ msgid "Layer 30"
#~ msgstr "Lager 30"
#~ msgid "Layer 31"
#~ msgstr "Lager 31"
#~ msgid "Layer 32"
#~ msgstr "Lager 32"
#~ msgid "No constraint"
#~ msgstr "Ingen begränsning"
#~ msgid "Track copy"
#~ msgstr "Kopiera spår"
#, fuzzy
#~ msgid "pl_editor is already running. Continue?"
#~ msgstr "GerbView körs redan. Fortsätt?"
#, c-format
#~ msgid "Checking %s; courtyard clearance: %s."
#~ msgstr "Kontroll %s; gårdsavstånd: %s."
#, c-format
#~ msgid "Checking %s; hole clearance: %s."
#~ msgstr "Kontroll %s; sidenavstånd: %s."
#~ msgid "The radius must be greater than zero."
#~ msgstr "Radien måste vara större än noll."
#, fuzzy
#~ msgid "Place a module"
#~ msgstr "Ta bort modul?"
#~ msgid "Via is not connected"
#~ msgstr "Via är inte ansluten"
#, fuzzy
#~ msgid "No entry selected"
#~ msgstr "Inget lager angivet"