/******************************************************************/ /* schframe.cpp - fonctions des classes du type WinEDA_DrawFrame */ /******************************************************************/ #ifdef __GNUG__ #pragma implementation #endif #include "fctsys.h" #include "common.h" #include "program.h" #include "libcmp.h" #include "general.h" #include "bitmaps.h" #include "protos.h" #include "id.h" #include "netlist.h" #include "annotate_dialog.h" #include "dialog_build_BOM.h" #include "dialog_erc.h" #include "dialog_find.h" #include "netlist_control.h" /*******************************/ /* class WinEDA_SchematicFrame */ /*******************************/ BEGIN_EVENT_TABLE( WinEDA_SchematicFrame, wxFrame ) COMMON_EVENTS_DRAWFRAME EVT_SOCKET( ID_EDA_SOCKET_EVENT_SERV, WinEDA_DrawFrame::OnSockRequestServer ) EVT_SOCKET( ID_EDA_SOCKET_EVENT, WinEDA_DrawFrame::OnSockRequest ) EVT_CLOSE( WinEDA_SchematicFrame::OnCloseWindow ) EVT_SIZE( WinEDA_SchematicFrame::OnSize ) EVT_MENU( ID_NEW_PROJECT, WinEDA_SchematicFrame::OnNewProject ) EVT_MENU( ID_LOAD_PROJECT, WinEDA_SchematicFrame::OnLoadProject ) EVT_MENU_RANGE( ID_LOAD_FILE_1, ID_LOAD_FILE_10, WinEDA_SchematicFrame::OnLoadFile ) EVT_TOOL( ID_NEW_PROJECT, WinEDA_SchematicFrame::OnNewProject ) EVT_TOOL( ID_LOAD_PROJECT, WinEDA_SchematicFrame::OnLoadProject ) EVT_TOOL_RANGE( ID_SCHEMATIC_MAIN_TOOLBAR_START, ID_SCHEMATIC_MAIN_TOOLBAR_END, WinEDA_SchematicFrame::Process_Special_Functions ) EVT_MENU_RANGE( ID_PREFERENCES_FONT_INFOSCREEN, ID_PREFERENCES_FONT_END, WinEDA_DrawFrame::ProcessFontPreferences ) EVT_MENU( ID_SAVE_PROJECT, WinEDA_SchematicFrame::Save_File ) EVT_MENU( ID_SAVE_ONE_SHEET, WinEDA_SchematicFrame::Save_File ) EVT_MENU( ID_SAVE_ONE_SHEET_AS, WinEDA_SchematicFrame::Save_File ) EVT_TOOL( ID_SAVE_PROJECT, WinEDA_SchematicFrame::Save_File ) EVT_MENU( ID_GEN_PRINT, WinEDA_SchematicFrame::ToPrinter ) EVT_MENU( ID_GEN_PLOT_PS, WinEDA_SchematicFrame::ToPlot_PS ) EVT_MENU( ID_GEN_PLOT_HPGL, WinEDA_SchematicFrame::ToPlot_HPGL ) EVT_MENU( ID_GEN_PLOT_SVG, WinEDA_DrawFrame::SVG_Print ) EVT_MENU( ID_GEN_COPY_SHEET_TO_CLIPBOARD, WinEDA_DrawFrame::CopyToClipboard ) EVT_MENU( ID_GEN_COPY_BLOCK_TO_CLIPBOARD, WinEDA_DrawFrame::CopyToClipboard ) EVT_MENU( ID_EXIT, WinEDA_SchematicFrame::OnExit ) EVT_MENU_RANGE( ID_CONFIG_AND_PREFERENCES_START, ID_CONFIG_AND_PREFERENCES_END, WinEDA_SchematicFrame::Process_Config ) EVT_TOOL( ID_COLORS_SETUP, WinEDA_SchematicFrame::Process_Config ) EVT_TOOL( ID_OPTIONS_SETUP, WinEDA_SchematicFrame::Process_Config ) EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, WinEDA_DrawFrame::SetLanguage ) EVT_TOOL_RANGE( ID_ZOOM_IN_BUTT, ID_ZOOM_PAGE_BUTT, WinEDA_SchematicFrame::Process_Zoom ) EVT_TOOL( ID_TO_LIBRARY, WinEDA_SchematicFrame::OnOpenLibraryEditor ) EVT_TOOL( ID_TO_LIBVIEW, WinEDA_SchematicFrame::OnOpenLibraryViewer ) EVT_TOOL( ID_TO_PCB, WinEDA_SchematicFrame::OnOpenPcbnew ) EVT_TOOL( ID_TO_CVPCB, WinEDA_SchematicFrame::OnOpenCvpcb ) EVT_TOOL( ID_SHEET_SET, WinEDA_DrawFrame::Process_PageSettings ) EVT_TOOL( ID_HIERARCHY, WinEDA_SchematicFrame::Process_Special_Functions ) EVT_TOOL( wxID_CUT, WinEDA_SchematicFrame::Process_Special_Functions ) EVT_TOOL( wxID_COPY, WinEDA_SchematicFrame::Process_Special_Functions ) EVT_TOOL( wxID_PASTE, WinEDA_SchematicFrame::Process_Special_Functions ) EVT_TOOL( ID_UNDO_BUTT, WinEDA_SchematicFrame::Process_Special_Functions ) EVT_TOOL( ID_GET_ANNOTATE, WinEDA_SchematicFrame::OnAnnotate ) EVT_TOOL( ID_GEN_PRINT, WinEDA_SchematicFrame::ToPrinter ) EVT_TOOL( ID_GET_ERC, WinEDA_SchematicFrame::OnErc ) EVT_TOOL( ID_GET_NETLIST, WinEDA_SchematicFrame::OnCreateNetlist ) EVT_TOOL( ID_GET_TOOLS, WinEDA_SchematicFrame::OnCreateBillOfMaterials ) EVT_TOOL( ID_FIND_ITEMS, WinEDA_SchematicFrame::OnFindItems ) EVT_TOOL( ID_BACKANNO_ITEMS, WinEDA_SchematicFrame::OnLoadStuffFile ) EVT_MENU( ID_GENERAL_HELP, WinEDA_DrawFrame::GetKicadHelp ) EVT_MENU( ID_KICAD_ABOUT, WinEDA_DrawFrame::GetKicadAbout ) // Tools et boutons de Schematique, Vertical toolbar: EVT_TOOL_RANGE( ID_SCHEMATIC_VERTICAL_TOOLBAR_START, ID_SCHEMATIC_VERTICAL_TOOLBAR_END, WinEDA_SchematicFrame::Process_Special_Functions ) EVT_TOOL_RCLICKED( ID_LABEL_BUTT, WinEDA_SchematicFrame::ToolOnRightClick ) EVT_TOOL_RCLICKED( ID_GLABEL_BUTT, WinEDA_SchematicFrame::ToolOnRightClick ) EVT_TOOL_RCLICKED( ID_HIERLABEL_BUTT, WinEDA_SchematicFrame::ToolOnRightClick ) EVT_MENU_RANGE( ID_POPUP_START_RANGE, ID_POPUP_END_RANGE, WinEDA_SchematicFrame::Process_Special_Functions ) // Tools et boutons de Schematique, Options toolbar: EVT_TOOL_RANGE( ID_TB_OPTIONS_START, ID_TB_OPTIONS_END, WinEDA_SchematicFrame::OnSelectOptionToolbar ) EVT_MENU_RANGE( ID_POPUP_GENERAL_START_RANGE, ID_POPUP_GENERAL_END_RANGE, WinEDA_SchematicFrame::Process_Special_Functions ) END_EVENT_TABLE() /****************/ /* Constructor */ /****************/ WinEDA_SchematicFrame::WinEDA_SchematicFrame( wxWindow* father, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : WinEDA_DrawFrame( father, SCHEMATIC_FRAME, title, pos, size, style ) { wxConfig* config = wxGetApp().m_EDA_Config; m_FrameName = wxT( "SchematicFrame" ); m_Draw_Axis = FALSE; // TRUE to show axis m_Draw_Grid = g_ShowGrid; // TRUE to show a grid m_Draw_Sheet_Ref = TRUE; // TRUE to show sheet references m_CurrentSheet = new DrawSheetPath(); m_CurrentField = NULL; m_Multiflag = 0; m_TextFieldSize = DEFAULT_SIZE_TEXT; m_LibeditFrame = NULL; // Component editor frame. m_ViewlibFrame = NULL; // Frame for browsing component libraries CreateScreens(); // Give an icon #ifdef __WINDOWS__ SetIcon( wxICON( a_icon_eeschema ) ); #else SetIcon( wxICON( icon_eeschema ) ); #endif g_ItemToRepeat = NULL; /* Get config */ GetSettings(); if( config ) { g_DrawMinimunLineWidth = config->Read( MINI_DRAW_LINE_WIDTH_KEY, (long) 0 ); g_PlotPSMinimunLineWidth = config->Read( MINI_PLOTPS_LINE_WIDTH_KEY, (long) 4 ); } SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); if( DrawPanel ) DrawPanel->m_Block_Enable = TRUE; ReCreateMenuBar(); ReCreateHToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); } /***************/ /* Destructor */ /***************/ WinEDA_SchematicFrame::~WinEDA_SchematicFrame() { SAFE_DELETE( g_RootSheet ); SAFE_DELETE( m_CurrentSheet ); //a DrawSheetPath, on the heap. m_CurrentSheet = NULL; } BASE_SCREEN* WinEDA_SchematicFrame::GetBaseScreen() const { return GetScreen(); } /***************/ /* utility functions */ /***************/ DrawSheetPath* WinEDA_SchematicFrame::GetSheet() { return m_CurrentSheet; } /****************************************************/ void WinEDA_SchematicFrame::SetSheetNumberAndCount() /****************************************************/ /** Function SetSheetNumberAndCount * Set the m_ScreenNumber and m_NumberOfScreen members for screens * must be called after a delete or add sheet command, ans when entering a sheet */ { SCH_SCREEN* screen = GetScreen(); EDA_ScreenList s_list; /* Set the screen count, and the screen number (1 for root sheet) */ int screen_num = 2; for ( screen = s_list.GetFirst(); screen != NULL; screen = s_list.GetNext() ) { if ( screen == g_RootSheet->m_AssociatedScreen ) screen->m_ScreenNumber = 1; else screen->m_ScreenNumber = screen_num++; screen->m_NumberOfScreen = s_list.GetCount(); } } SCH_SCREEN* WinEDA_SchematicFrame::GetScreen() const { return m_CurrentSheet->LastScreen(); } void WinEDA_SchematicFrame::SetScreen( SCH_SCREEN* screen ) { //find it in the hierarchy, and set it. //there is ambiguity in this function (there may be several //instances of a given sheet, but irregardless it is useful //for printing etc. DrawSheetPath sheetlist; if( g_RootSheet->LocatePathOfScreen( screen, &sheetlist ) ) { *m_CurrentSheet = sheetlist; m_CurrentSheet->UpdateAllScreenReferences(); } } wxString WinEDA_SchematicFrame::GetScreenDesc() { wxString s = m_CurrentSheet->PathHumanReadable(); return s; } void WinEDA_SchematicFrame::CreateScreens() { /* creation des ecrans Sch , Lib */ if( g_RootSheet == NULL ) { g_RootSheet = new DrawSheetStruct(); } if( g_RootSheet->m_AssociatedScreen == NULL ) { g_RootSheet->m_AssociatedScreen = new SCH_SCREEN(); g_RootSheet->m_AssociatedScreen->m_RefCount++; } g_RootSheet->m_AssociatedScreen->m_FileName = g_DefaultSchematicFileName; g_RootSheet->m_AssociatedScreen->m_Date = GenDate(); m_CurrentSheet->Clear(); m_CurrentSheet->Push( g_RootSheet ); if( g_ScreenLib == NULL ) g_ScreenLib = new SCH_SCREEN(); g_ScreenLib->SetZoom( 4 ); g_ScreenLib->m_UndoRedoCountMax = 10; } /*****************************************************************/ void WinEDA_SchematicFrame::OnCloseWindow( wxCloseEvent& Event ) /*****************************************************************/ { DrawSheetPath* sheet; wxConfig* config = wxGetApp().m_EDA_Config; if( m_LibeditFrame ) // Can close component editor ? { if( !m_LibeditFrame->Close() ) return; } EDA_SheetList sheets( g_RootSheet ); for( sheet = sheets.GetFirst(); sheet != NULL; sheet = sheets.GetNext() ) { if( sheet->LastScreen() && sheet->LastScreen()->IsModify() ) break; } if( sheet ) { unsigned ii; wxMessageDialog dialog( this, _( "Schematic modified, Save before exit ?" ), _( "Confirmation" ), wxYES_NO | wxCANCEL | wxICON_EXCLAMATION | wxYES_DEFAULT ); ii = dialog.ShowModal(); switch( ii ) { case wxID_CANCEL: Event.Veto(); return; case wxID_NO: break; case wxID_OK: case wxID_YES: SaveProject(); break; } } for( sheet = sheets.GetFirst(); sheet != NULL; sheet = sheets.GetNext() ) { if( sheet->LastScreen() ) { sheet->LastScreen()->ClrModify(); } } if( !g_RootSheet->m_AssociatedScreen->m_FileName.IsEmpty() && (g_RootSheet->m_AssociatedScreen->EEDrawList != NULL) ) SetLastProject( g_RootSheet->m_AssociatedScreen->m_FileName ); ClearProjectDrawList( g_RootSheet->m_AssociatedScreen, TRUE ); /* allof sub sheets are deleted, only the main sheet is useable */ m_CurrentSheet->Clear(); SaveSettings(); if( config ) { config->Write( MINI_DRAW_LINE_WIDTH_KEY, (long) g_DrawMinimunLineWidth ); config->Write( MINI_PLOTPS_LINE_WIDTH_KEY, (long) g_PlotPSMinimunLineWidth ); } Destroy(); } /***************************************************************************** * Enable or disable some tools according to current conditions *****************************************************************************/ void WinEDA_SchematicFrame::SetToolbars() { if( m_HToolBar ) { if( GetScreen() && GetScreen()->BlockLocate.m_Command == BLOCK_MOVE ) { m_HToolBar->EnableTool( wxID_CUT, TRUE ); m_HToolBar->EnableTool( wxID_COPY, TRUE ); } else { m_HToolBar->EnableTool( wxID_CUT, FALSE ); m_HToolBar->EnableTool( wxID_COPY, FALSE ); } if( g_BlockSaveDataList ) m_HToolBar->EnableTool( wxID_PASTE, TRUE ); else m_HToolBar->EnableTool( wxID_PASTE, FALSE ); wxMenuBar* menuBar = GetMenuBar(); if( GetScreen() && GetScreen()->m_RedoList ) { m_HToolBar->EnableTool( ID_SCHEMATIC_REDO, TRUE ); menuBar->Enable( ID_SCHEMATIC_REDO, TRUE ); } else { m_HToolBar->EnableTool( ID_SCHEMATIC_REDO, FALSE ); menuBar->Enable( ID_SCHEMATIC_REDO, FALSE ); } if( GetScreen() && GetScreen()->m_UndoList ) { m_HToolBar->EnableTool( ID_SCHEMATIC_UNDO, TRUE ); menuBar->Enable( ID_SCHEMATIC_UNDO, TRUE ); } else { m_HToolBar->EnableTool( ID_SCHEMATIC_UNDO, FALSE ); menuBar->Enable( ID_SCHEMATIC_UNDO, FALSE ); } } if( m_OptionsToolBar ) { m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_GRID, m_Draw_Grid ); m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_GRID, m_Draw_Grid ? _( "Grid not show" ) : _( "Show Grid" ) ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SELECT_UNIT_MM, g_UnitMetric == MILLIMETRE ? TRUE : FALSE ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SELECT_UNIT_INCH, g_UnitMetric == INCHES ? TRUE : FALSE ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SELECT_CURSOR, g_CursorShape ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_HIDDEN_PINS, g_ShowAllPins ); m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_HIDDEN_PINS, g_ShowAllPins ? _( "No show Hidden Pins" ) : _( "Show Hidden Pins" ) ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_BUS_WIRES_ORIENT, g_HVLines ); m_OptionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_BUS_WIRES_ORIENT, g_HVLines ? _( "Allows any direction for wires and busses" ) : _( "Allows horizontal and vertical wires and busses only" ) ); } DisplayUnitsMsg(); } int WinEDA_SchematicFrame::BestZoom() { int dx, dy, ii, jj; int bestzoom; wxSize size; dx = GetScreen()->m_CurrentSheetDesc->m_Size.x; dy = GetScreen()->m_CurrentSheetDesc->m_Size.y; size = DrawPanel->GetClientSize(); ii = dx / size.x; jj = dy / size.y; bestzoom = MAX( ii, jj ) + 1; GetScreen()->SetZoom( ii ); GetScreen()->m_Curseur.x = dx / 2; GetScreen()->m_Curseur.y = dy / 2; return bestzoom; } /**************************************************************/ void WinEDA_SchematicFrame::OnAnnotate( wxCommandEvent& event ) /**************************************************************/ { WinEDA_AnnotateFrame* dlg = new WinEDA_AnnotateFrame( this ); dlg->ShowModal(); dlg->Destroy(); } /*********************************************************/ void WinEDA_SchematicFrame::OnErc( wxCommandEvent& event ) /*********************************************************/ { WinEDA_ErcFrame* dlg = new WinEDA_ErcFrame( this ); dlg->ShowModal(); dlg->Destroy(); } /*******************************************************************/ void WinEDA_SchematicFrame::OnCreateNetlist( wxCommandEvent& event ) /*******************************************************************/ { int i; if ( g_NetFormat < NET_TYPE_PCBNEW ) g_NetFormat = NET_TYPE_PCBNEW; do { WinEDA_NetlistFrame* dlg = new WinEDA_NetlistFrame( this ); i = dlg->ShowModal(); dlg->Destroy(); } while( i == NET_PLUGIN_CHANGE ); // If a plugin is removed or added, rebuild and reopen the new dialog } /**********************************************************************/ void WinEDA_SchematicFrame::OnCreateBillOfMaterials( wxCommandEvent & ) /**********************************************************************/ { WinEDA_Build_BOM_Frame* dlg = new WinEDA_Build_BOM_Frame( this ); dlg->ShowModal(); dlg->Destroy(); } /*******************************************************************/ void WinEDA_SchematicFrame::OnFindItems( wxCommandEvent& event ) /*******************************************************************/ { this->DrawPanel->m_IgnoreMouseEvents = TRUE; WinEDA_FindFrame* dlg = new WinEDA_FindFrame( this ); dlg->ShowModal(); dlg->Destroy(); this->DrawPanel->m_IgnoreMouseEvents = FALSE; } /***************************************************************/ void WinEDA_SchematicFrame::OnLoadFile( wxCommandEvent& event ) /***************************************************************/ { int i = event.GetId() - ID_LOAD_FILE_1; LoadOneEEProject( GetLastProject( i ).GetData( ), false ); SetToolbars(); } /*******************************************************************/ void WinEDA_SchematicFrame::OnLoadStuffFile( wxCommandEvent& event ) /*******************************************************************/ { ReadInputStuffFile( ); DrawPanel->Refresh(); } /****************************************************************/ void WinEDA_SchematicFrame::OnNewProject( wxCommandEvent& event ) /****************************************************************/ { LoadOneEEProject( wxEmptyString, true ); } /*****************************************************************/ void WinEDA_SchematicFrame::OnLoadProject( wxCommandEvent& event ) /*****************************************************************/ { LoadOneEEProject( wxEmptyString, false ); } /****************************************************************/ void WinEDA_SchematicFrame::OnOpenPcbnew( wxCommandEvent& event ) /****************************************************************/ { wxString Line = g_RootSheet->m_AssociatedScreen->m_FileName; if( Line != wxEmptyString ) { AddDelimiterString( Line ); ChangeFileNameExt( Line, wxEmptyString ); ExecuteFile( this, PCBNEW_EXE, Line ); } else ExecuteFile( this, PCBNEW_EXE ); } /***************************************************************/ void WinEDA_SchematicFrame::OnOpenCvpcb( wxCommandEvent& event ) /***************************************************************/ { wxString Line = g_RootSheet->m_AssociatedScreen->m_FileName; if( Line != wxEmptyString ) { AddDelimiterString( Line ); ChangeFileNameExt( Line, wxEmptyString ); ExecuteFile( this, CVPCB_EXE, Line ); } else ExecuteFile( this, CVPCB_EXE ); } /*************************************************************************/ void WinEDA_SchematicFrame::OnOpenLibraryViewer( wxCommandEvent& event ) /*************************************************************************/ { if( m_ViewlibFrame ) { m_ViewlibFrame->Show( TRUE ); } else { m_ViewlibFrame = new WinEDA_ViewlibFrame( this ); m_ViewlibFrame->AdjustScrollBars(); } } /*************************************************************************/ void WinEDA_SchematicFrame::OnOpenLibraryEditor( wxCommandEvent& event ) /*************************************************************************/ { if( m_LibeditFrame ) { m_LibeditFrame->Show( TRUE ); } else { m_LibeditFrame = new WinEDA_LibeditFrame( this, wxT( "Library Editor" ), wxPoint( -1, -1 ), wxSize( 600, 400 ) ); ActiveScreen = g_ScreenLib; m_LibeditFrame->AdjustScrollBars(); } } void WinEDA_SchematicFrame::OnExit( wxCommandEvent& event ) { Close( true ); }