# Generate a static library target named "bitmaps" # (with filename libbitmaps.a on Linux) # Copy the *.xpm files to ${XPM_CPP_PATH}/*.cpp, on change only. # Compile those *.cpp files and put them into the library, then done. # NAKed by Dick: # builds a set of all the .xpm files # file(GLOB BITMAP_SRCS *.xpm) NO, does not build proper dependency # generation or allow renaming of bitmap files, NAKed by Dick. # this is twice now I've had to change this. # Dick: use this one instead: set(BITMAP_SRCS 3d.xpm Add_Arc.xpm Add_Bus2Bus.xpm add_bus.xpm Add_Circle.xpm Add_Component.xpm Add_Corner.xpm Add_Dashed_Line.xpm add_dimension.xpm Add_Entry.xpm Add_GLabel.xpm add_hierarchical_label.xpm add_hierar_pin.xpm add_hierar_subsheet.xpm Add_Junction.xpm Add_Line2Bus.xpm Add_Line_Label.xpm Add_Line.xpm Add_Mires.xpm Add_Polygon.xpm Add_Power.xpm Add_Rectangle.xpm Add_Text.xpm Add_Tracks.xpm Add_Zone_Cutout.xpm Add_Zone.xpm anchor.xpm annotate_down_right.xpm annotate_right_down.xpm annotate.xpm Apply.xpm auto_associe.xpm Auto_track_width.xpm axis3d_back.xpm axis3d_bottom.xpm axis3d_front.xpm axis3d_left.xpm axis3d_right.xpm axis3d_top.xpm axis3d.xpm backanno.xpm book.xpm Break_Bus.xpm Break_Line.xpm Browse_Files.xpm cancel_tool.xpm Cancel.xpm checked_ok.xpm component_select_unit.xpm component_select_alternate_shape.xpm config.xpm CopyBlock.xpm copyComponent.xmp copy.xpm copper_layers_setup.cpp Cursor_Shape.xpm cursor.xpm cut.xpm cvpcb.xpm dashline.xpm Datasheet.xpm del_body.xpm Delete_Arc.xpm delete_association.xpm Delete_Bus.xpm Delete_Circle.xpm Delete_Connection.xpm Delete_Cotation.xpm Delete_Field.xpm Delete_GLabel.xpm Delete_Line.xpm Delete_Module.xpm Delete_Net.xpm Delete_Node.xpm Delete_Pad.xpm Delete_Pinsheet.xpm Delete_Pin.xpm Delete_Polygon.xpm Delete_Rectangle.xpm Delete_Segment.xpm Delete_Sheet.xpm Delete_Text.xpm Delete_Track.xpm delete.xpm del_track.xpm directory.xpm Display_Options.xpm down.xpm Drag_Module.xpm Drag_Outline_Segment.xpm Drag_Pad.xpm Drag_Segment_WithSlope.xpm Drag_Track_Segment.xpm drc_off.xpm drc.xpm Edges_Sketch.xpm Edit_Comp_Footprint.xpm Edit_Component.xpm Edit_Comp_Ref.xpm Edit_Comp_Value.xpm Edit_Module.xpm Editor.xpm Edit_Part.xpm Edit_Sheet.xpm Edit_Text.xpm Edit.xpm eeschema.xpm Enter_Sheet.xpm ercerr.xpm ercgreen.xpm ercwarn.xpm erc.xpm Exit.xpm Export_Module.xpm Export_Options_Pad.xpm export.xpm fabrication.xpm File_FootPrint.xpm fill_zone.xpm find_xpm.xpm Flag.xpm Fonts.xpm Footprint_Text.xpm gbr_select_mode0.xpm gbr_select_mode1.xpm gbr_select_mode2.xpm general_deletions.xpm general_ratsnet.xpm GLabel2Label.xpm GLabel2Text.xpm GL_Change.xpm Global_Options_Pad.xpm green.xpm grid_select.xpm grid_select_axis.xpm grid.xpm hammer.xpm help.xpm Hidden_Pin.xpm Hierarchy_cursor.xpm Hierarchy_Nav.xpm hotkeys.xpm icon_3d.xpm icon_cvpcb_small.xpm icon_cvpcb.xpm icon_eeschema.xpm icon_gerbview_small.xpm icon_gerbview.xpm icon_kicad.xpm icon_modedit.xpm icon_pcbnew.xpm icon_txt.xpm import3d.xpm import_cmp_from_lib.xpm import_hierarchical_label.xpm Import_Module.xpm import.xpm Info.xpm Insert_Module_Board.xpm Invert_Module.xpm invisible_text.xpm jigsaw.xpm kicad_icon_small.xpm Label2GLabel.xpm Label2Text.xpm label.xpm Lang_Catalan.xpm Lang_chinese.xpm Lang_Cs.xpm Lang_Default.xpm Lang_De.xpm Lang_En.xpm Lang_Es.xpm Lang_Fr.xpm Lang_Fi.xpm Lang_Hu.xpm Lang_It.xpm Lang_Ko.xpm Lang_Nl.xpm Lang_Pl.xpm Lang_Pt.xpm Lang_Ru.xpm Lang_Sl.xpm Language.xpm layers_manager.xpm Leave_Sheet.xpm left.xpm libedit_icon.xpm libedit.xpm libedprt.xpm Lib_next.xpm Lib_previous.xpm library_browse.xpm library_update.xpm library.xpm libsavem.xpm libview.xpm Lines90.xpm Load_Module_Board.xpm Load_Module_Lib.xpm local_ratsnet.xpm Locked.xpm mirepcb.xpm Mirror_H.xpm Mirror_V.xpm modedit.xpm Mode_Module.xpm Mode_Track.xpm modratsnest.xpm Module_Check.xpm Modul_Edit.xpm module_filtered_list.xpm module_full_list.xpm module_options.xpm Module_Ratsnet.xpm module.xpm Morgan1.xpm Morgan2.xpm Move_Arc.xpm Move_Circle.xpm Move_Field.xpm Move_GLabel.xpm Move_Line.xpm Move_Module.xpm Move_Pad.xpm Move_Pinsheet.xpm Move_Pin.xpm Move_Polygon.xpm Move_Rectangle.xpm Move_Sheet.xpm Move_Text.xpm Move_Track_Segment.xpm Move_Track.xpm Move.xpm mw_Add_Gap.xpm mw_Add_Line.xpm mw_Add_Shape.xpm mw_Add_stub_arc.xpm mw_Add_Stub.xpm mw_toolbar.xpm Net_HighLight.xpm netlist.xpm Net_Locked.xpm Net_UnLocked.xpm new_component.xpm new_cvpcb.xpm New_FootPrint.xpm New_Library.xpm New_Module.xpm new_pcb.xpm New_Project.xpm new_sch.xpm new_txt.xpm new.xpm noconn.xpm Normal.xpm online_help.xpm Open_Library.xpm Open_Project.xpm open.xpm options_all_tracks_and_vias.xpm Options_All_Tracks.xpm Options_All_Vias.xpm Options_Arc.xpm Options_Circle.xpm Options_Module.xpm Options_New_Pad.xpm Options_Pad.xpm Options_Pinsheet.xpm Options_Pin.xpm Options_Rectangle.xpm Options_Segment.xpm Options_Text.xpm Options_Tracks.xpm Options_Track.xpm Options_Vias.xpm opt_show_polygon.xpm Orient.xpm ortho.xpm Pad_Sketch.xpm pad.xpm pads_mask_layers.xpm palette.xpm part_properties.xpm paste.xpm pcbnew.xpm PcbOffset.xpm pin2pin.xpm Pin_Name_to.xpm Pin_Number_to.xpm Pin_Size_to.xpm pinorient_right.xpm pinorient_left.xpm pinorient_up.xpm pinorient_down.xpm pinshape_normal.xpm pinshape_invert.xpm pinshape_clock_normal.xpm pinshape_clock_invert.xpm pinshape_active_low_input.xpm pinshape_clock_active_low.xpm pinshape_active_low_output.xpm pinshape_clock_fall.xpm pinshape_nonlogic.xpm pintype_input.xpm pintype_output.xpm pintype_bidi.xpm pintype_3states.xpm pintype_passive.xpm pintype_notspecif.xpm pintype_powerinput.xpm pintype_poweroutput.xpm pintype_opencoll.xpm pintype_openemit.xpm pintype_noconnect.xpm Pin_to.xpm pin.xpm plot_HPG.xpm plot_PS.xpm plot_xpm.xpm polar.xpm Post_Compo.xpm Post_Drill.xpm Post_Module.xpm preference.xpm print.xpm ratsnest.xpm Read_SetUp.xpm redo.xpm red.xpm reload2.xpm reload.xpm Reset_Text.xpm Resize_Sheet.xpm right.xpm Rotate_Field.xpm Rotate_GLabel.xpm Rotate_Module-.xpm Rotate_Module+.xpm Rotate_Pin.xpm Rotate-.xpm Rotate+.xpm rotate-x.xpm rotate+x.xpm rotate-y.xpm rotate+y.xpm rotate-z.xpm rotate+z.xpm save_as.xpm Save_CmpStuff.xpm Save_Library.xpm Save_NetList.xpm Save_Project.xpm Save_SetUp.xpm save.xpm schematic.xpm select_grid.xpm Select_Layer_Pair.xpm Select_W_Layer.xpm shape_3d.xpm sheetset.xpm showdcode.xpm showmodedge.xpm showtrack.xpm Show_Zone.xpm Show_Zone_Disable.xpm Show_Zone_Outline_Only.xpm Swap_Layer.xpm Text_Sketch.xpm tool_ratsnet.xpm tools.xpm Track_Locked.xpm Track_Sketch.xpm Track_UnLocked.xpm transistor.xpm treensel.xpm treesel.xpm undelete.xpm undo.xpm unit_inch.xpm unit_mm.xpm unknown.xpm Unlocked.xpm unzip.xpm Update_Module_Board.xpm up.xpm Via_Sketch.xpm viewlibs_icon.xpm Web_support.xpm Width_Net.xpm Width_Segment.xpm Width_Track_Via.xpm Width_Track.xpm Width_Vias.xpm zip_tool.xpm zip.xpm Zoom_1.xpm zoom_auto.xpm Zoom_Center.xpm zoom_in.xpm zoomoins3d.xpm zoom_out.xpm zoompage3d.xpm Zoom_Page.xpm zoomplus3d.xpm zoom_redraw.xpm zoomrefr3d.xpm Zoom_Selected.xpm Zoom_Select.xpm zoom.xpm ) # Get the path of the *.xpm files into "PATH" set(PATH ${CMAKE_CURRENT_SOURCE_DIR}) #message("PATH = ${PATH}") # The name of the directory to put the copied and renamed *.xpm files into. # As files are copied they are renamed to *.cpp. set(XPM_CPP_PATH "${CMAKE_BINARY_DIR}/bitmaps/auto_renamed_to_cpp" CACHE PATH "path to store renamed .xpm files for compilation") foreach(LOOP_VAR ${BITMAP_SRCS}) get_filename_component(BASENAME ${LOOP_VAR} NAME_WE) set(CPP_BITMAP "${XPM_CPP_PATH}/${BASENAME}.cpp") add_custom_command( OUTPUT ${CPP_BITMAP} COMMAND "${CMAKE_COMMAND}" -E copy "${PATH}/${BASENAME}.xpm" "${CPP_BITMAP}" DEPENDS ${BASENAME}.xpm) list(APPEND CPP_BITMAPS ${CPP_BITMAP}) set_source_files_properties(${CPP_BITMAP} PROPERTIES COMPILE_FLAGS -DXPMMAIN) endforeach(LOOP_VAR) add_library(bitmaps ${CPP_BITMAPS})