/**
 * @file sel_layer.cpp
 * @brief Set up the basic primitives for Layer control.
 */

#include <fctsys.h>
#include <common.h>
#include <class_drawpanel.h>
#include <confirm.h>
#include <wxBasePcbFrame.h>
#include <pcbcommon.h>

#include <class_board.h>


enum layer_sel_id {
    ID_LAYER_SELECT_TOP = 1800,
    ID_LAYER_SELECT_BOTTOM,
    ID_LAYER_SELECT
};


class SELECT_LAYER_DIALOG : public wxDialog
{
private:
    PCB_BASE_FRAME* m_Parent;
    wxRadioBox*     m_LayerList;
    LAYER_NUM m_LayerId[int(NB_PCB_LAYERS) + 1]; // One extra element for "(Deselect)" radiobutton

public:
    // Constructor and destructor
    SELECT_LAYER_DIALOG( PCB_BASE_FRAME* parent, LAYER_NUM default_layer,
                         LAYER_NUM min_layer, LAYER_NUM max_layer, bool null_layer );
    ~SELECT_LAYER_DIALOG() { };

private:
    void OnLayerSelected( wxCommandEvent& event );
    void OnCancelClick( wxCommandEvent& event );

    DECLARE_EVENT_TABLE()
};


BEGIN_EVENT_TABLE( SELECT_LAYER_DIALOG, wxDialog )
    EVT_BUTTON( wxID_OK, SELECT_LAYER_DIALOG::OnLayerSelected )
    EVT_BUTTON( wxID_CANCEL, SELECT_LAYER_DIALOG::OnCancelClick )
    EVT_RADIOBOX( ID_LAYER_SELECT, SELECT_LAYER_DIALOG::OnLayerSelected )
END_EVENT_TABLE()


/** Install the dialog box for layer selection
 * @param default_layer = Preselection (NB_PCB_LAYERS for "(Deselect)" layer)
 * @param min_layer = min layer value (-1 if no min value)
 * @param max_layer = max layer value (-1 if no max value)
 * @param null_layer = display a "(Deselect)" radiobutton (when set to true)
 * @return new layer value (NB_PCB_LAYERS when "(Deselect)" radiobutton selected),
 *                         or -1 if canceled
 *
 * Providing the option to also display a "(Deselect)" radiobutton makes the
 * "Swap Layers" command (and GerbView's "Export to Pcbnew" command) more "user
 * friendly", by permitting any layer to be "deselected" immediately after its
 * corresponding radiobutton has been clicked on. (It would otherwise be
 * necessary to first cancel the "Select Layer:" dialog box (invoked after a
 * different radiobutton is clicked on) prior to then clicking on the
 * "Deselect"
 * button provided within the "Swap Layers:" or "Layer selection:" dialog box).
 */
LAYER_NUM PCB_BASE_FRAME::SelectLayer( LAYER_NUM  default_layer,
                                       LAYER_NUM  min_layer,
                                       LAYER_NUM  max_layer,
                                       bool null_layer )
{
    SELECT_LAYER_DIALOG* frame = new SELECT_LAYER_DIALOG( this,
                                                            default_layer,
                                                            min_layer,
                                                            max_layer,
                                                            null_layer );

    LAYER_NUM layer = frame->ShowModal();
    frame->Destroy();
    return layer;
}


/*
 * The "OK" and "Cancel" buttons are positioned (in a horizontal line)
 * beneath the "Layer" radiobox, unless that contains only one column of
 * radiobuttons, in which case they are positioned (in a vertical line)
 * to the right of that radiobox.
 */
SELECT_LAYER_DIALOG::SELECT_LAYER_DIALOG( PCB_BASE_FRAME* parent,
                                          LAYER_NUM default_layer, LAYER_NUM min_layer,
                                          LAYER_NUM max_layer, bool null_layer ) :
    wxDialog( parent, -1, _( "Select Layer:" ), wxPoint( -1, -1 ),
              wxSize( 470, 250 ),
              DIALOG_STYLE )
{
    BOARD*    board = parent->GetBoard();
    wxButton* Button;
    LAYER_NUM ii;
    wxString  LayerList[NB_PCB_LAYERS + 1]; // One extra element for "(Deselect)"
                                        // radiobutton
    int       LayerCount, LayerSelect = -1;

    m_Parent = parent;

    // Build the layer list
    LayerCount = 0;
    LAYER_MSK Masque_Layer = g_TabAllCopperLayerMask[board->GetCopperLayerCount() - 1];
    Masque_Layer |= ALL_NO_CU_LAYERS;

    for( ii = FIRST_LAYER; ii < NB_PCB_LAYERS; ++ii )
    {
        m_LayerId[ii] = FIRST_LAYER;

        if( GetLayerMask( ii ) & Masque_Layer )
        {
            if( min_layer > ii )
                continue;

            if( ( max_layer >= 0 ) && ( max_layer < ii ) )
                break;

            LayerList[LayerCount] = board->GetLayerName( ii );

            if( ii == default_layer )
                LayerSelect = LayerCount;

            m_LayerId[LayerCount] = ii;
            LayerCount++;
        }
    }

    // When appropriate, also provide a "(Deselect)" radiobutton
    if( null_layer )
    {
        LayerList[LayerCount] = _( "(Deselect)" );

        if( NB_PCB_LAYERS == default_layer )
            LayerSelect = LayerCount;

        m_LayerId[LayerCount] = NB_PCB_LAYERS;
        LayerCount++;
    }

    m_LayerList = new wxRadioBox( this, ID_LAYER_SELECT, _( "Layer" ),
                                  wxPoint( -1, -1 ), wxSize( -1, -1 ),
                                  LayerCount, LayerList,
                                  (LayerCount < 8) ? LayerCount : 8,
                                  wxRA_SPECIFY_ROWS );

    if( LayerSelect >= 0 )
        m_LayerList->SetSelection( LayerSelect );

    wxBoxSizer* FrameBoxSizer = new wxBoxSizer( wxHORIZONTAL );
    SetSizer( FrameBoxSizer );
    FrameBoxSizer->Add( m_LayerList, 0, wxALIGN_TOP | wxALL, 5 );
    wxBoxSizer* ButtonBoxSizer = new wxBoxSizer( wxVERTICAL );
    FrameBoxSizer->Add( ButtonBoxSizer, 0, wxALIGN_BOTTOM | wxALL, 0 );

    Button = new wxButton( this, wxID_OK, _( "OK" ) );
    Button->SetDefault();
    ButtonBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 );

    Button = new wxButton( this, wxID_CANCEL, _( "Cancel" ) );
    ButtonBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 );

    SetFocus();

    GetSizer()->SetSizeHints( this );

    Center();
}


void SELECT_LAYER_DIALOG::OnLayerSelected( wxCommandEvent& event )
{
    int ii = m_LayerId[m_LayerList->GetSelection()];

    EndModal( ii );
}


void SELECT_LAYER_DIALOG::OnCancelClick( wxCommandEvent& event )
{
    EndModal( -1 );
}


/*********************************************/
/* Dialog for the selecting pairs of layers. */
/*********************************************/

class SELECT_LAYERS_PAIR_DIALOG : public wxDialog
{
private:
    PCB_BASE_FRAME* m_Parent;
    wxRadioBox*     m_LayerListTOP;
    wxRadioBox*     m_LayerListBOTTOM;
    LAYER_NUM m_LayerId[NB_COPPER_LAYERS];

public: SELECT_LAYERS_PAIR_DIALOG( PCB_BASE_FRAME* parent );
    ~SELECT_LAYERS_PAIR_DIALOG() { };

private:
    void OnOkClick( wxCommandEvent& event );
    void OnCancelClick( wxCommandEvent& event );

    DECLARE_EVENT_TABLE()
};


BEGIN_EVENT_TABLE( SELECT_LAYERS_PAIR_DIALOG, wxDialog )
    EVT_BUTTON( wxID_OK, SELECT_LAYERS_PAIR_DIALOG::OnOkClick )
    EVT_BUTTON( wxID_CANCEL, SELECT_LAYERS_PAIR_DIALOG::OnCancelClick )
END_EVENT_TABLE()


/* Display a list of two copper layers for selection of a pair of layers
 * for auto-routing, vias ...
 */
void PCB_BASE_FRAME::SelectLayerPair()
{
    // Check whether more than one copper layer has been enabled for the
    // current PCB file, as Layer Pairs can only meaningfully be defined
    // within PCB files which contain at least two copper layers.
    if( GetBoard()->GetCopperLayerCount() < 2 )
    {
        wxString InfoMsg;
        InfoMsg = _( "Less than two copper layers are being used." );
        InfoMsg << wxT( "\n" ) << _( "Hence layer pairs cannot be specified." );
        DisplayInfoMessage( this, InfoMsg );
        return;
    }

    SELECT_LAYERS_PAIR_DIALOG* frame = new SELECT_LAYERS_PAIR_DIALOG( this );

    int result = frame->ShowModal();
    frame->Destroy();
    m_canvas->MoveCursorToCrossHair();

    // if user changed colors and we are in high contrast mode, then redraw
    // because the PAD_SMD pads may change color.
    if( result >= 0  &&  DisplayOpt.ContrastModeDisplay )
    {
        m_canvas->Refresh();
    }
}


SELECT_LAYERS_PAIR_DIALOG::SELECT_LAYERS_PAIR_DIALOG( PCB_BASE_FRAME* parent ) :
    wxDialog( parent, -1, _( "Select Layer Pair:" ), wxPoint( -1, -1 ),
              wxSize( 470, 250 ), DIALOG_STYLE )
{
    BOARD*    board = parent->GetBoard();
    wxButton* Button;
    wxString  LayerList[NB_COPPER_LAYERS];
    LAYER_NUM LayerTopSelect = FIRST_LAYER, LayerBottomSelect = FIRST_LAYER;

    m_Parent = parent;

    PCB_SCREEN* screen = (PCB_SCREEN*) m_Parent->GetScreen();
    LAYER_MSK Masque_Layer = g_TabAllCopperLayerMask[board->GetCopperLayerCount() - 1];
    Masque_Layer |= ALL_NO_CU_LAYERS;

    LAYER_NUM LayerCount = FIRST_LAYER;
    for( LAYER_NUM ii = FIRST_COPPER_LAYER; ii < NB_COPPER_LAYERS; ++ii )
    {
        m_LayerId[ii] = FIRST_LAYER;

        if( (GetLayerMask( ii ) & Masque_Layer) )
        {
            LayerList[LayerCount] = board->GetLayerName( ii );

            if( ii == screen->m_Route_Layer_TOP )
                LayerTopSelect = LayerCount;

            if( ii == screen->m_Route_Layer_BOTTOM )
                LayerBottomSelect = LayerCount;

            m_LayerId[LayerCount] = ii;
            ++LayerCount;
        }
    }

    m_LayerListTOP = new wxRadioBox( this, ID_LAYER_SELECT_TOP,
                                     _( "Top Layer" ),
                                     wxPoint( -1, -1 ), wxSize( -1, -1 ),
                                     LayerCount, LayerList,
                                     (LayerCount < 8) ? LayerCount : 8,
                                     wxRA_SPECIFY_ROWS );
    m_LayerListTOP->SetSelection( LayerTopSelect );

    m_LayerListBOTTOM = new wxRadioBox( this, ID_LAYER_SELECT_BOTTOM,
                                        _( "Bottom Layer" ),
                                        wxPoint( -1, -1 ), wxSize( -1, -1 ),
                                        LayerCount, LayerList,
                                        (LayerCount < 8) ? LayerCount : 8,
                                        wxRA_SPECIFY_ROWS );
    m_LayerListBOTTOM->SetSelection( LayerBottomSelect );

    wxBoxSizer* FrameBoxSizer = new wxBoxSizer( wxVERTICAL );
    SetSizer( FrameBoxSizer );

    wxBoxSizer* RadioBoxSizer = new wxBoxSizer( wxHORIZONTAL );
    FrameBoxSizer->Add( RadioBoxSizer, 0, wxALIGN_LEFT | wxALL, 0 );

    wxBoxSizer* ButtonBoxSizer = new wxBoxSizer( wxHORIZONTAL );
    FrameBoxSizer->Add( ButtonBoxSizer, 0, wxALIGN_RIGHT | wxALL, 0 );

    RadioBoxSizer->Add( m_LayerListTOP, 0, wxALIGN_TOP | wxALL, 5 );
    RadioBoxSizer->Add( m_LayerListBOTTOM, 0, wxALIGN_TOP | wxALL, 5 );

    Button = new wxButton( this, wxID_OK, _( "OK" ) );
    Button->SetDefault();
    ButtonBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 );

    Button = new wxButton( this, wxID_CANCEL, _( "Cancel" ) );
    ButtonBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 );
    SetFocus();

    GetSizer()->SetSizeHints( this );
    Center();
}


void SELECT_LAYERS_PAIR_DIALOG::OnOkClick( wxCommandEvent& event )
{
    // select the same layer for top and bottom is allowed (normal in some
    // boards)
    // but could be a mistake. So display an info message
    if( m_LayerId[m_LayerListTOP->GetSelection()] == m_LayerId[m_LayerListBOTTOM->GetSelection()] )
        DisplayInfoMessage( this,
                            _( "Warning: The Top Layer and Bottom Layer are same." ) );

    PCB_SCREEN* screen = (PCB_SCREEN*) m_Parent->GetScreen();

    screen->m_Route_Layer_TOP    = m_LayerId[m_LayerListTOP->GetSelection()];
    screen->m_Route_Layer_BOTTOM = m_LayerId[m_LayerListBOTTOM->GetSelection()];

    EndModal( 0 );
}


void SELECT_LAYERS_PAIR_DIALOG::OnCancelClick( wxCommandEvent& event )
{
    EndModal( -1 );
}