/**************************************************/ /* Module de tst "ERC" ( Electrical Rules Check ) */ /**************************************************/ #include "fctsys.h" #include "common.h" #include "program.h" #include "libcmp.h" #include "general.h" #include "netlist.h" #include "protos.h" #include "../bitmaps/ercgreen.xpm" #include "../bitmaps/ercwarn.xpm" #include "../bitmaps/ercerr.xpm" #include "dialog_erc.h" /* On teste 1 - conflits entre pins connectees ( ex: 2 sorties connectees ) 2 - les imperatifs minimaux ( 1 entree doit etre connectee a une sortie ) */ /* fonctions exportees */ /* fonctions importees */ /* fonctions locales */ static bool WriteDiagnosticERC(const wxString & FullFileName); static void Diagnose(WinEDA_DrawPanel * panel, wxDC * DC, ObjetNetListStruct * NetItemRef, ObjetNetListStruct * NetItemTst, int MinConnexion, int Diag); static void TestOthersItems(WinEDA_DrawPanel * panel, wxDC * DC, ObjetNetListStruct * NetItemRef, ObjetNetListStruct * NetStart, int * NetNbItems, int * MinConnexion ); static void TestLabel(WinEDA_DrawPanel * panel, wxDC * DC, ObjetNetListStruct * NetItemRef, ObjetNetListStruct * StartNet); /* Variable locales */ int WriteFichierERC = FALSE; /* Tableau des types de conflit : PIN_INPUT, PIN_OUTPUT, PIN_BIDI, PIN_TRISTATE, PIN_PASSIVE, PIN_UNSPECIFIED, PIN_POWER_IN, PIN_POWER_OUT, PIN_OPENCOLLECTOR, PIN_OPENEMITTER, PIN_NC */ #define OK 0 #define WAR 1 // utilisé aussi dans eeredraw #define ERR 2 #define UNC 3 static wxChar * CommentERC_H[] = { wxT("Input Pin...."), wxT("Output Pin..."), wxT("BiDi Pin....."), wxT("3 State Pin.."), wxT("Passive Pin.."), wxT("Unspec Pin..."), wxT("Power IN Pin."), wxT("PowerOUT Pin."), wxT("Open Coll...."), wxT("Open Emit...."), wxT("No Conn......"), NULL }; static wxChar * CommentERC_V[] = { wxT("Input Pin"), wxT("Output Pin"), wxT("BiDi Pin"), wxT("3 State Pin"), wxT("Passive Pin"), wxT("Unspec Pin"), wxT("Power IN Pin"), wxT("PowerOUT Pin"), wxT("Open Coll"), wxT("Open Emit"), wxT("No Conn"), NULL }; /* Look up table which gives the diag for a pair of connected pins Can be modified by ERC options. at start up: must be loaded by DefaultDiagErc */ static int DiagErc[PIN_NMAX][PIN_NMAX]; bool DiagErcTableInit; // go to TRUE after DiagErc init /* Default Look up table which gives the diag for a pair of connected pins Same as DiagErc, but cannot be modified Used to init or reset DiagErc */ static int DefaultDiagErc[PIN_NMAX][PIN_NMAX] = { /* I, O, Bi, 3S, Pas, UnS,PwrI,PwrO, OC, OE, NC */ /* I */ { OK, OK, OK, OK, OK, WAR, OK, OK, OK, OK, WAR }, /* O */ { OK, ERR, OK, WAR, OK, WAR, OK, ERR, ERR, ERR, WAR }, /* Bi*/ { OK, OK, OK, OK, OK, WAR, OK, WAR, OK, WAR, WAR }, /* 3S*/ { OK, WAR, OK, OK, OK, WAR, WAR, ERR, WAR, WAR, WAR }, /*Pas*/ { OK, OK, OK, OK, OK, WAR, OK, OK, OK, OK, WAR }, /*UnS */{ WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR }, /*PwrI*/{ OK, OK, OK, WAR, OK, WAR, OK, OK, OK, OK, ERR }, /*PwrO*/{ OK, ERR, WAR, ERR, OK, WAR, OK, ERR, ERR, ERR, WAR }, /* OC */{ OK, ERR, OK, WAR, OK, WAR, OK, ERR, OK, OK, WAR }, /* OE */{ OK, ERR, WAR, WAR, OK, WAR, OK, ERR, OK, OK, WAR }, /* NC */{ WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR } } ; /* Minimal connection table */ #define DRV 3 /* Net driven by a signal (a pin output for instance) */ #define NET_NC 2 /* Net "connected" to a "NoConnect symbol" */ #define NOD 1 /* Net not driven ( Such as 2 or more connected inputs )*/ #define NOC 0 /* Pin isolee, non connectee */ /* Look up table which gives the minimal drive for a pair of connected pins on a net Initial state of a net is NOC (No Connection) Can be updated to NET_NC, or NOD (Not Driven) or DRV (DRIven) Can be updated to NET_NC only if the previous state is NOC Nets are OK when their final state is NET_NC or DRV Nets with the state NOD have no source signal */ static int MinimalReq[PIN_NMAX][PIN_NMAX] = { /* In, Out, Bi, 3S, Pas, UnS,PwrI,PwrO, OC, OE, NC */ /* In*/ { NOD, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC }, /*Out*/ { DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, NOC }, /* Bi*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC }, /* 3S*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC }, /*Pas*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC }, /*UnS*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC }, /*PwrI*/{ NOD, DRV, NOD, NOD, NOD, NOD, NOD, DRV, NOD, NOD, NOC }, /*PwrO*/{ DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, NOC }, /* OC*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC }, /* OE*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC }, /* NC*/ { NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC } } ; /*************************************************************/ void InstallErcFrame(WinEDA_SchematicFrame *parent, wxPoint & pos) /*************************************************************/ /* Install function for the ERC dialog frame */ { WinEDA_ErcFrame * frame = new WinEDA_ErcFrame(parent); frame->ShowModal(); frame->Destroy(); } /*********************************************/ void WinEDA_ErcFrame::ReBuildMatrixPanel(void) /*********************************************/ /* Build or rebuild the panel showing the ERC matrix */ { int ii, jj, event_id, text_height; wxPoint pos, BoxMatrixPosition; #define BITMAP_SIZE 19 int bitmap_size = BITMAP_SIZE; wxStaticText * text; int x, y; wxSize BoxMatrixMinSize; if ( ! DiagErcTableInit ) { memcpy(DiagErc, DefaultDiagErc, sizeof (DefaultDiagErc)); DiagErcTableInit = TRUE; } // Get the current text size : text = new wxStaticText( m_PanelERCOptions,-1,wxT("W"), pos); // this is a dummy text text_height = text->GetRect().GetHeight(); bitmap_size = MAX(bitmap_size, text_height); delete text; // compute the Y pos interval: BoxMatrixMinSize.y = (bitmap_size*(PIN_NMAX+1)) + 5; GetSizer()->Fit(this); GetSizer()->SetSizeHints(this); pos = m_MatrixSizer->GetPosition(); // Size computation is not made in constructor, in some wxWidgets version, // and m_BoxSizerForERC_Opt position is always 0,0. and we can't use it pos.x = MAX( pos.x, 5); pos.y = MAX( pos.y, m_ResetOptButton->GetRect().GetHeight() + 30); BoxMatrixPosition = pos; pos.y += text_height; if ( m_Initialized == FALSE ) { for ( ii = 0; ii < PIN_NMAX; ii++ ) { y = pos.y + (ii * bitmap_size); text = new wxStaticText( m_PanelERCOptions,-1,CommentERC_H[ii], wxPoint(5,y)); x = text->GetRect().GetRight(); pos.x = MAX(pos.x, x); } pos.x += 5; } else pos = m_ButtonList[0][0]->GetPosition(); for ( ii = 0; ii < PIN_NMAX; ii++ ) { y = pos.y + (ii * bitmap_size); for ( jj = 0; jj <= ii; jj++ ) { int diag = DiagErc[ii][jj]; x = pos.x + (jj * bitmap_size); if( (ii == jj) && ! m_Initialized ) { wxPoint txtpos; txtpos.x = x + 4; txtpos.y = y - bitmap_size; text = new wxStaticText( m_PanelERCOptions,-1,CommentERC_V[ii], txtpos); BoxMatrixMinSize.x = MAX( BoxMatrixMinSize.x, text->GetRect().GetRight()); } event_id = ID_MATRIX_0 + ii + (jj * PIN_NMAX); delete m_ButtonList[ii][jj]; switch ( diag ) { case OK: m_ButtonList[ii][jj] = new wxBitmapButton(m_PanelERCOptions, event_id, wxBitmap(green_xpm), wxPoint(x,y) ); break; case WAR: m_ButtonList[ii][jj] = new wxBitmapButton(m_PanelERCOptions, event_id, wxBitmap(warning_xpm), wxPoint(x,y) ); break; case ERR: m_ButtonList[ii][jj] = new wxBitmapButton(m_PanelERCOptions, event_id, wxBitmap(error_xpm), wxPoint(x,y) ); break; } } } if ( !m_Initialized ) { BoxMatrixMinSize.x += 5; m_MatrixSizer->SetMinSize(BoxMatrixMinSize); BoxMatrixMinSize.y += BoxMatrixPosition.y; m_PanelMatrixSizer->SetMinSize(BoxMatrixMinSize); } m_Initialized = TRUE; } /**************************************************/ void WinEDA_ErcFrame::TestErc(wxCommandEvent& event) /**************************************************/ { ObjetNetListStruct * NetItemRef, * OldItem, * StartNet, * Lim; int NetNbItems, MinConn; if ( ! DiagErcTableInit ) { memcpy(DiagErc, DefaultDiagErc, sizeof (DefaultDiagErc)); DiagErcTableInit = TRUE; } WriteFichierERC = m_WriteResultOpt->GetValue(); ReAnnotatePowerSymbolsOnly(); if( CheckAnnotate(m_Parent, 0) ) { DisplayError(this, _("Annotation Required!") ); return; } /* Effacement des anciens marqueurs DRC */ DelERCMarkers(event); wxClientDC dc(m_Parent->DrawPanel); m_Parent->DrawPanel->PrepareGraphicContext(&dc); g_EESchemaVar.NbErrorErc = 0; g_EESchemaVar.NbWarningErc = 0; /* Cleanup the entire hierarchy */ EDA_ScreenList ScreenList(NULL); for ( SCH_SCREEN * Screen = ScreenList.GetFirst(); Screen != NULL; Screen = ScreenList.GetNext() ) { bool ModifyWires; ModifyWires = Screen->SchematicCleanUp(NULL); /* if wire list has changed, delete Udo Redo list to avoid pointers on deleted data problems */ if ( ModifyWires ) Screen->ClearUndoRedoList(); } m_Parent->BuildNetListBase(); /* Analyse de la table des connexions : */ Lim = g_TabObjNet + g_NbrObjNet; /* Reset du flag m_FlagOfConnection, utilise par la suite */ for (NetItemRef = g_TabObjNet; NetItemRef < Lim; NetItemRef ++ ) NetItemRef->m_FlagOfConnection = (IsConnectType) 0; NetNbItems = 0; MinConn = NOC; StartNet = OldItem = NetItemRef = g_TabObjNet; for ( ; NetItemRef < Lim; NetItemRef ++ ) { /* Tst changement de net */ if( OldItem->m_NetCode != NetItemRef->m_NetCode) { MinConn = NOC; NetNbItems = 0; StartNet = NetItemRef; } switch ( NetItemRef->m_Type ) { case NET_SEGMENT: case NET_BUS: case NET_JONCTION: case NET_LABEL: case NET_BUSLABELMEMBER: case NET_PINLABEL: break; case NET_GLOBLABEL: case NET_GLOBBUSLABELMEMBER: case NET_SHEETLABEL: case NET_SHEETBUSLABELMEMBER: TestLabel(m_Parent->DrawPanel, &dc, NetItemRef, StartNet); break; case NET_NOCONNECT: MinConn = NET_NC; if( NetNbItems != 0 ) Diagnose(m_Parent->DrawPanel, &dc, NetItemRef, NULL, MinConn, UNC); break; case NET_PIN: TestOthersItems(m_Parent->DrawPanel, &dc, NetItemRef, StartNet, &NetNbItems , &MinConn); break; } OldItem = NetItemRef; } FreeTabNetList(g_TabObjNet, g_NbrObjNet ); wxString num; num.Printf(wxT("%d"), g_EESchemaVar.NbErrorErc); m_TotalErrCount->SetLabel(num); num.Printf(wxT("%d"), g_EESchemaVar.NbErrorErc-g_EESchemaVar.NbWarningErc); m_LastErrCount->SetLabel(num); num.Printf(wxT("%d"), g_EESchemaVar.NbWarningErc); m_LastWarningCount->SetLabel(num); /* Generation ouverture fichier diag */ if( WriteFichierERC == TRUE ) { wxString ErcFullFileName; ErcFullFileName = ScreenSch->m_FileName; ChangeFileNameExt(ErcFullFileName, wxT(".erc")); ErcFullFileName = EDA_FileSelector(_("ERC file:"), wxEmptyString, /* Chemin par defaut */ ErcFullFileName, /* nom fichier par defaut */ wxT(".erc"), /* extension par defaut */ wxT("*.erc"), /* Masque d'affichage */ this, wxFD_SAVE, TRUE ); if ( ErcFullFileName.IsEmpty()) return; if ( WriteDiagnosticERC(ErcFullFileName) ) { Close(TRUE); wxString editorname = GetEditorName(); AddDelimiterString(ErcFullFileName); ExecuteFile(this, editorname, ErcFullFileName); } } } /***********************************************************/ void WinEDA_ErcFrame::DelERCMarkers(wxCommandEvent& event) /***********************************************************/ /* Delete the old ERC markers, over the whole hierarchy */ { EDA_BaseStruct * DrawStruct; DrawMarkerStruct * Marker; wxClientDC dc(m_Parent->DrawPanel); m_Parent->DrawPanel->PrepareGraphicContext(&dc); // Delete markers for the current screen DrawStruct = m_Parent->GetScreen()->EEDrawList; for ( ; DrawStruct != NULL; DrawStruct = DrawStruct->Pnext ) { if(DrawStruct->Type() != DRAW_MARKER_STRUCT_TYPE ) continue; /* Marqueur trouve */ Marker = (DrawMarkerStruct * ) DrawStruct; if( Marker->m_Type == MARQ_ERC ) RedrawOneStruct(m_Parent->DrawPanel, &dc, Marker, g_XorMode); } /* Suppression en memoire des marqueurs ERC */ DeleteAllMarkers(MARQ_ERC); } /**************************************************************/ void WinEDA_ErcFrame::ResetDefaultERCDiag(wxCommandEvent& event) /**************************************************************/ /* Remet aux valeurs par defaut la matrice de diagnostic */ { memcpy(DiagErc,DefaultDiagErc, sizeof(DiagErc) ); ReBuildMatrixPanel(); } /************************************************************/ void WinEDA_ErcFrame::ChangeErrorLevel(wxCommandEvent& event) /************************************************************/ /* Change the error level for the pressed button, on the matrix table */ { int id, level, ii, x, y; wxBitmapButton * Butt; char ** new_bitmap_xpm = NULL; wxPoint pos; id = event.GetId(); ii = id - ID_MATRIX_0; Butt = (wxBitmapButton*) event.GetEventObject(); pos = Butt->GetPosition(); x = ii /PIN_NMAX; y = ii % PIN_NMAX; level = DiagErc[y][x]; switch (level ) { case OK: level = WAR; new_bitmap_xpm = warning_xpm; break; case WAR : level = ERR; new_bitmap_xpm = error_xpm; break; case ERR: level = OK; new_bitmap_xpm = green_xpm; break; } if ( new_bitmap_xpm ) { delete Butt; Butt = new wxBitmapButton(m_PanelERCOptions, id, wxBitmap(new_bitmap_xpm), pos); m_ButtonList[y][x] = Butt; DiagErc[y][x] = DiagErc[x][y] = level; } } /********************************************************/ static void Diagnose(WinEDA_DrawPanel * panel, wxDC * DC, ObjetNetListStruct * NetItemRef, ObjetNetListStruct * NetItemTst, int MinConn, int Diag) /********************************************************/ /* Routine de creation du marqueur ERC correspondant au conflit electrique entre NetItemRef et NetItemTst si MinConn < 0: Traitement des erreurs sur labels */ { DrawMarkerStruct * Marker = NULL; wxString DiagLevel; SCH_SCREEN * screen; int ii, jj; if( Diag == OK ) return; /* Creation du nouveau marqueur type Erreur ERC */ Marker = new DrawMarkerStruct(NetItemRef->m_Start, wxEmptyString); Marker->m_Type = MARQ_ERC; Marker->m_MarkFlags = WAR; screen = NetItemRef->m_Screen; Marker->Pnext = screen->EEDrawList; screen->EEDrawList = Marker; g_EESchemaVar.NbErrorErc++; g_EESchemaVar.NbWarningErc++; if( MinConn < 0 ) // Traitement des erreurs sur labels { if( (NetItemRef->m_Type == NET_GLOBLABEL) || (NetItemRef->m_Type == NET_GLOBBUSLABELMEMBER) ) { Marker->m_Comment.Printf( _("Warning GLabel %s not connected to SheetLabel"), NetItemRef->m_Label->GetData()); } else Marker->m_Comment.Printf( _("Warning SheetLabel %s not connected to GLabel"), NetItemRef->m_Label->GetData()); if( screen == panel->GetScreen() ) RedrawOneStruct(panel, DC, Marker, GR_COPY); return; } ii = NetItemRef->m_ElectricalType; if( NetItemTst == NULL ) { if( MinConn == NOC ) /* 1 seul element dans le net */ { Marker->m_Comment.Printf( _("Warning Pin %s Unconnected"), MsgPinElectricType[ii]); if( screen == panel->GetScreen() ) RedrawOneStruct(panel, DC, Marker, GR_COPY); return; } if( MinConn == NOD ) /* pas de pilotage du net */ { Marker->m_Comment.Printf( _("Warning Pin %s not driven (Net %d)"), MsgPinElectricType[ii], NetItemRef->m_NetCode); if( screen == panel->GetScreen() ) RedrawOneStruct(panel, DC, Marker, GR_COPY); return; } if( Diag == UNC ) { Marker->m_Comment.Printf( _("Warning More than 1 Pin connected to UnConnect symbol") ); if( screen == panel->GetScreen() ) RedrawOneStruct(panel, DC, Marker, GR_COPY); return; } } if( NetItemTst ) /* Erreur entre 2 pins */ { jj = NetItemTst->m_ElectricalType; DiagLevel = _("Warning"); if(Diag == ERR) { DiagLevel = _("Error"); Marker->m_MarkFlags = ERR; g_EESchemaVar.NbWarningErc--; } Marker->m_Comment.Printf( _("%s: Pin %s connected to Pin %s (net %d)"), DiagLevel.GetData(), MsgPinElectricType[ii], MsgPinElectricType[jj], NetItemRef->m_NetCode); if( screen == panel->GetScreen() ) RedrawOneStruct(panel, DC, Marker, GR_COPY); } } /********************************************************************/ static void TestOthersItems(WinEDA_DrawPanel * panel, wxDC * DC, ObjetNetListStruct * NetItemRef, ObjetNetListStruct * netstart, int * NetNbItems, int * MinConnexion) /********************************************************************/ /* Routine testant les conflits electriques entre NetItemRef et les autres items du meme net */ { ObjetNetListStruct * NetItemTst, * Lim; int ref_elect_type, jj, erc = OK, local_minconn; /* Analyse de la table des connexions : */ Lim = g_TabObjNet + g_NbrObjNet; // pointe la fin de la liste ref_elect_type = NetItemRef->m_ElectricalType; NetItemTst = netstart; local_minconn = NOC; /* Examen de la liste des Pins connectees a NetItemRef */ for ( ; ; NetItemTst ++ ) { if ( NetItemRef == NetItemTst ) continue; /* Est - on toujours dans le meme net ? */ if( (NetItemTst >= Lim) || // fin de liste (donc fin de net) (NetItemRef->m_NetCode != NetItemTst->m_NetCode) ) // fin de net { /* Fin de netcode trouve: Tst connexion minimum */ if( (*MinConnexion < NET_NC ) && (local_minconn < NET_NC ) ) /* pin non connectée ou non pilotee */ { Diagnose(panel, DC, NetItemRef, NULL, local_minconn, WAR); * MinConnexion = DRV; // inhibition autres messages de ce type pour ce net } return; } switch ( NetItemTst->m_Type ) { case NET_SEGMENT: case NET_BUS: case NET_JONCTION: case NET_LABEL: case NET_GLOBLABEL: case NET_BUSLABELMEMBER: case NET_GLOBBUSLABELMEMBER: case NET_SHEETBUSLABELMEMBER: case NET_SHEETLABEL: case NET_PINLABEL: break; case NET_NOCONNECT: local_minconn = MAX( NET_NC, local_minconn); break; case NET_PIN: jj = NetItemTst->m_ElectricalType; local_minconn = MAX( MinimalReq[ref_elect_type][jj], local_minconn ); if ( NetItemTst <= NetItemRef ) break; *NetNbItems += 1; if( erc == OK ) // 1 marqueur par pin maxi { erc = DiagErc[ref_elect_type][jj]; if (erc != OK ) { if( NetItemTst->m_FlagOfConnection == 0 ) { Diagnose(panel, DC, NetItemRef, NetItemTst, 0, erc); NetItemTst->m_FlagOfConnection = (IsConnectType) 1; } } } break; } } } /********************************************************/ static bool WriteDiagnosticERC(const wxString & FullFileName) /*********************************************************/ /* Create the Diagnostic file (.erc file) */ { EDA_BaseStruct * DrawStruct; DrawMarkerStruct * Marker; char Line[256]; static FILE * OutErc; DrawSheetStruct * Sheet; wxString msg; if( (OutErc = wxFopen( FullFileName, wxT("wt"))) == NULL ) return FALSE; DateAndTime(Line); msg = _("ERC control"); fprintf( OutErc, "%s (%s)\n", CONV_TO_UTF8(msg), Line); EDA_ScreenList ScreenList(NULL); for ( SCH_SCREEN * Screen = ScreenList.GetFirst(); Screen != NULL; Screen = ScreenList.GetNext() ) { Sheet = (DrawSheetStruct*) Screen; msg.Printf( _("\n***** Sheet %d (%s)\n"), Sheet->m_SheetNumber, Screen == ScreenSch ? _("Root") : Sheet->m_SheetName.GetData()); fprintf( OutErc, "%s", CONV_TO_UTF8(msg)); DrawStruct = Screen->EEDrawList; for ( ; DrawStruct != NULL; DrawStruct = DrawStruct->Pnext) { if(DrawStruct->Type() != DRAW_MARKER_STRUCT_TYPE ) continue; /* Marqueur trouve */ Marker = (DrawMarkerStruct * ) DrawStruct; if( Marker->m_Type != MARQ_ERC ) continue; /* Write diag marqueur */ msg.Printf( _("ERC: %s (X= %2.3f inches, Y= %2.3f inches\n"), Marker->GetComment().GetData(), (float)Marker->m_Pos.x / 1000, (float)Marker->m_Pos.y / 1000); fprintf( OutErc, "%s", CONV_TO_UTF8(msg)); } } msg.Printf( _("\n >> Errors ERC: %d\n"), g_EESchemaVar.NbErrorErc); fprintf( OutErc, "%s", CONV_TO_UTF8(msg)); fclose ( OutErc ); return TRUE; } /***********************************************************************/ void TestLabel(WinEDA_DrawPanel * panel, wxDC * DC, ObjetNetListStruct * NetItemRef, ObjetNetListStruct * StartNet) /***********************************************************************/ /* Routine controlant qu'un sheetLabel est bien connecte a un Glabel de la sous-feuille correspondante */ { ObjetNetListStruct * NetItemTst, * Lim; int erc = 1; /* Analyse de la table des connexions : */ Lim = g_TabObjNet + g_NbrObjNet; NetItemTst = StartNet; /* Examen de la liste des Labels connectees a NetItemRef */ for ( ; ; NetItemTst ++ ) { if( NetItemTst == NetItemRef ) continue; /* Est - on toujours dans le meme net ? */ if( ( NetItemTst == Lim ) || ( NetItemRef->m_NetCode != NetItemTst->m_NetCode ) ) { /* Fin de netcode trouve */ if( erc ) { /* GLabel ou SheetLabel orphelin */ Diagnose(panel, DC, NetItemRef, NULL, -1, WAR); } return; } if( (NetItemRef->m_Type == NET_GLOBLABEL) || (NetItemRef->m_Type == NET_GLOBBUSLABELMEMBER) ) { switch ( NetItemTst->m_Type ) { case NET_SEGMENT: case NET_BUS: case NET_JONCTION: case NET_LABEL: case NET_GLOBLABEL: case NET_BUSLABELMEMBER: case NET_GLOBBUSLABELMEMBER: case NET_PINLABEL: case NET_NOCONNECT: case NET_PIN: break; case NET_SHEETBUSLABELMEMBER: case NET_SHEETLABEL: /* Tst si le GLabel est bien dans la bonne sousfeuille */ if( NetItemRef->m_SheetNumber == NetItemTst->m_NumInclude ) { erc = 0; } break; } } else { switch ( NetItemTst->m_Type ) { case NET_SEGMENT: case NET_BUS: case NET_JONCTION: case NET_LABEL: case NET_BUSLABELMEMBER: case NET_SHEETBUSLABELMEMBER: case NET_SHEETLABEL: case NET_PINLABEL: case NET_NOCONNECT: case NET_PIN: break; case NET_GLOBLABEL: case NET_GLOBBUSLABELMEMBER: /* Tst si le GLabel est bien dans la bonne sous-feuille */ if( NetItemTst->m_SheetNumber == NetItemRef->m_NumInclude ) { erc = 0; } break; } } } }