# taotieren , 2021, 2022, 2023. # kai chiao chuang , 2021. # David Chen , 2021. # ZbeeGin , 2021. # pondahai , 2022. # willliam , 2022. # Seth Hillbrand , 2023. msgid "" msgstr "" "Project-Id-Version: KiCad\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2023-02-15 16:29-0800\n" "PO-Revision-Date: 2023-02-06 07:25+0000\n" "Last-Translator: taotieren \n" "Language-Team: Chinese (Traditional) \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Weblate 4.16-dev\n" "X-Poedit-SourceCharset: UTF-8\n" "X-Poedit-KeywordsList: _;_HKI\n" "X-Poedit-Basepath: ../../../../../Downloads/kicad-master\n" "X-Poedit-SearchPath-0: .\n" "X-Poedit-SearchPath-1: 3d-viewer\n" "X-Poedit-SearchPath-2: cvpcb\n" "X-Poedit-SearchPath-3: eeschema\n" "X-Poedit-SearchPath-4: gerbview\n" "X-Poedit-SearchPath-5: kicad\n" #: 3d-viewer/3d_cache/3d_plugin_manager.cpp:58 msgid "All Files" msgstr "所有檔案" #: 3d-viewer/3d_canvas/board_adapter.cpp:312 msgid "Build board outline" msgstr "構建電路板邊框" #: 3d-viewer/3d_canvas/board_adapter.cpp:520 msgid "Create layers" msgstr "建立圖層" #: 3d-viewer/3d_canvas/board_adapter.cpp:669 #: pcbnew/dialogs/dialog_footprint_checker.cpp:116 msgid "No footprint loaded." msgstr "未載入任何封裝。" #: 3d-viewer/3d_canvas/board_adapter.cpp:685 msgid "" "Footprint outline is missing or malformed. Run Footprint Checker for a full " "analysis." msgstr "封裝輪廓缺失或畸形。執行封裝檢查器進行全面分析。" #: 3d-viewer/3d_canvas/board_adapter.cpp:694 msgid "Board outline is missing or malformed. Run DRC for a full analysis." msgstr "電路板輪廓缺失或畸形。執行設計規則檢查 (DRC) 進行全面分析。" #: 3d-viewer/3d_canvas/create_layer_items.cpp:226 msgid "Create tracks and vias" msgstr "建立導線和過孔" #: 3d-viewer/3d_canvas/create_layer_items.cpp:678 msgid "Create zones" msgstr "建立敷銅" #: 3d-viewer/3d_canvas/create_layer_items.cpp:745 msgid "Simplifying copper layers polygons" msgstr "簡化銅層多邊形" #: 3d-viewer/3d_canvas/create_layer_items.cpp:754 msgid "Simplifying polygons on F_Cu" msgstr "簡化 F_Cu 上的多邊形" #: 3d-viewer/3d_canvas/create_layer_items.cpp:765 msgid "Simplifying polygons on B_Cu" msgstr "簡化 B_Cu 上的多邊形" #: 3d-viewer/3d_canvas/create_layer_items.cpp:795 #, c-format msgid "Simplifying %d copper layers" msgstr "簡化 %d 銅層" #: 3d-viewer/3d_canvas/create_layer_items.cpp:835 msgid "Simplify holes contours" msgstr "簡化通孔輪廓" #: 3d-viewer/3d_canvas/create_layer_items.cpp:864 msgid "Build Tech layers" msgstr "構造工藝層" #: 3d-viewer/3d_canvas/create_layer_items.cpp:903 #, c-format msgid "Build Tech layer %d" msgstr "構造工藝層 %d" #: 3d-viewer/3d_canvas/create_layer_items.cpp:1063 msgid "Build BVH for holes and vias" msgstr "為通孔和過孔構造 BVH (盲埋孔)" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:389 #, fuzzy msgid "OpenGL context creation error" msgstr "下列專案的輻條計數解析度：" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:420 msgid "Your OpenGL version is not supported. Minimum required is 1.5." msgstr "不支援您的 OpenGL 版本。最低要求版本為 1.5。" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:556 #, c-format msgid "Last render time %.0f ms" msgstr "上次渲染時間 %.0f ms" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:663 #, c-format msgid "Net %s\tNet class %s" msgstr "網路 %s \t網路類 %s" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:687 #, c-format msgid "Pad %s\t" msgstr "焊盤 %s\t" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:718 #, c-format msgid "Rule area %s\t" msgstr "規則區域 %s\t" #: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:720 #, c-format msgid "Zone %s\t" msgstr "區域 %s\t" #: 3d-viewer/3d_rendering/opengl/create_scene.cpp:464 msgid "Load OpenGL: board" msgstr "載入 OpenGL：電路板" #: 3d-viewer/3d_rendering/opengl/create_scene.cpp:497 msgid "Load OpenGL: holes and vias" msgstr "載入 OpenGL：通孔和過孔" #: 3d-viewer/3d_rendering/opengl/create_scene.cpp:565 msgid "Load OpenGL: layers" msgstr "載入 OpenGL：層" #: 3d-viewer/3d_rendering/opengl/create_scene.cpp:578 #, c-format msgid "Load OpenGL layer %d" msgstr "載入 OpenGL 層 %d" #: 3d-viewer/3d_rendering/opengl/create_scene.cpp:677 #: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:791 #: pcbnew/plugins/altium/altium_pcb.cpp:1600 msgid "Loading 3D models..." msgstr "正在載入 3D 模型…" #: 3d-viewer/3d_rendering/opengl/create_scene.cpp:686 #: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:949 #, c-format msgid "Reload time %.3f s" msgstr "重新載入時間 %.3f s" #: 3d-viewer/3d_rendering/opengl/create_scene.cpp:955 #: eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp:426 #: eeschema/sch_plugins/kicad/sch_sexpr_plugin.cpp:303 #: eeschema/sch_plugins/legacy/sch_legacy_plugin.cpp:284 #: eeschema/symbol_library.cpp:491 pcbnew/plugins/eagle/eagle_plugin.cpp:309 #: pcbnew/plugins/fabmaster/fabmaster_plugin.cpp:75 #: pcbnew/plugins/kicad/pcb_plugin.cpp:2376 #: pcbnew/plugins/legacy/legacy_plugin.cpp:440 #, c-format msgid "Loading %s..." msgstr "正在載入 %s…" #: 3d-viewer/3d_rendering/opengl/render_3d_opengl.cpp:561 #: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:175 msgid "Loading..." msgstr "載入中..." #: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:387 msgid "Load Raytracing: board" msgstr "載入光線追蹤：電路板" #: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:558 msgid "Load Raytracing: layers" msgstr "載入光線追蹤：層" #: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:340 #, c-format msgid "Rendering time %.3f s" msgstr "渲染時間 %.3f s" #: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:394 #, c-format msgid "Rendering: %.0f %%" msgstr "渲染：%.0f %%" #: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:842 msgid "Rendering: Post processing shader" msgstr "渲染：後處理著色器" #: 3d-viewer/3d_viewer/3d_menubar.cpp:50 msgid "Export Current View as PNG..." msgstr "匯出當前檢視為 PNG..." #: 3d-viewer/3d_viewer/3d_menubar.cpp:55 msgid "Export Current View as JPEG..." msgstr "匯出當前檢視為 JPEG..." #: 3d-viewer/3d_viewer/3d_menubar.cpp:61 common/eda_base_frame.cpp:1084 #: common/hotkey_store.cpp:76 common/tool/actions.cpp:596 #: pcbnew/footprint_viewer_frame.cpp:1148 pcbnew/pcb_base_frame.cpp:726 msgid "3D Viewer" msgstr "3D 檢視器" #: 3d-viewer/3d_viewer/3d_menubar.cpp:69 msgid "Copy 3D Image" msgstr "複製 3D 影象" #: 3d-viewer/3d_viewer/3d_menubar.cpp:107 msgid "Raytracing" msgstr "光線追蹤" #: 3d-viewer/3d_viewer/3d_menubar.cpp:112 common/tool/actions.cpp:632 #: cvpcb/menubar.cpp:74 eeschema/menubar.cpp:306 #: eeschema/sim/toolbars_sim_plot_frame.cpp:141 #: eeschema/symbol_editor/menubar_symbol_editor.cpp:169 #: gerbview/menubar.cpp:226 kicad/menubar.cpp:202 #: pagelayout_editor/menubar.cpp:159 pcbnew/menubar_footprint_editor.cpp:244 #: pcbnew/menubar_pcb_editor.cpp:461 msgid "Preferences..." msgstr "偏好設定..." #: 3d-viewer/3d_viewer/3d_menubar.cpp:113 common/tool/actions.cpp:632 #: cvpcb/menubar.cpp:75 eeschema/menubar.cpp:307 #: eeschema/sim/toolbars_sim_plot_frame.cpp:142 #: eeschema/symbol_editor/menubar_symbol_editor.cpp:170 #: gerbview/menubar.cpp:227 kicad/menubar.cpp:203 #: pagelayout_editor/menubar.cpp:160 pcbnew/menubar_footprint_editor.cpp:245 #: pcbnew/menubar_pcb_editor.cpp:462 msgid "Show preferences for all open tools" msgstr "顯示所有開啟工具的偏好設定" #: 3d-viewer/3d_viewer/3d_menubar.cpp:117 msgid "Reset to Default Settings" msgstr "重置為預設值" #: 3d-viewer/3d_viewer/3d_menubar.cpp:133 msgid "3D Grid" msgstr "3D 網格" #: 3d-viewer/3d_viewer/3d_menubar.cpp:146 #: bitmap2component/bitmap2cmp_gui.cpp:236 cvpcb/menubar.cpp:87 #: eeschema/menubar.cpp:317 eeschema/sim/toolbars_sim_plot_frame.cpp:152 #: eeschema/symbol_editor/menubar_symbol_editor.cpp:180 #: eeschema/toolbars_symbol_viewer.cpp:135 gerbview/menubar.cpp:237 #: kicad/menubar.cpp:213 pagelayout_editor/menubar.cpp:169 #: pcbnew/menubar_footprint_editor.cpp:254 pcbnew/menubar_pcb_editor.cpp:472 #: pcbnew/toolbars_footprint_viewer.cpp:193 msgid "&File" msgstr "檔案 (&F)" #: 3d-viewer/3d_viewer/3d_menubar.cpp:147 cvpcb/menubar.cpp:88 #: eeschema/menubar.cpp:318 #: eeschema/symbol_editor/menubar_symbol_editor.cpp:181 kicad/menubar.cpp:214 #: pagelayout_editor/menubar.cpp:170 pcbnew/menubar_footprint_editor.cpp:255 #: pcbnew/menubar_pcb_editor.cpp:473 msgid "&Edit" msgstr "編輯 (&E)" #: 3d-viewer/3d_viewer/3d_menubar.cpp:148 eeschema/menubar.cpp:319 #: eeschema/sim/toolbars_sim_plot_frame.cpp:153 #: eeschema/symbol_editor/menubar_symbol_editor.cpp:182 #: eeschema/toolbars_symbol_viewer.cpp:136 gerbview/menubar.cpp:238 #: kicad/menubar.cpp:215 pagelayout_editor/menubar.cpp:171 #: pcbnew/menubar_footprint_editor.cpp:256 pcbnew/menubar_pcb_editor.cpp:474 #: pcbnew/toolbars_footprint_viewer.cpp:194 msgid "&View" msgstr "檢視 (&V)" #: 3d-viewer/3d_viewer/3d_menubar.cpp:149 cvpcb/menubar.cpp:89 #: eeschema/sim/toolbars_sim_plot_frame.cpp:155 gerbview/menubar.cpp:240 #: kicad/menubar.cpp:217 msgid "&Preferences" msgstr "偏好設定 (&P)" #: 3d-viewer/3d_viewer/3d_toolbar.cpp:59 #: pcbnew/widgets/appearance_controls.cpp:2731 #, c-format msgid "Viewports (%s+Tab):" msgstr "視口 (%s+Tab)：" #: 3d-viewer/3d_viewer/3d_toolbar.cpp:68 #: pcbnew/widgets/appearance_controls.cpp:2740 msgid "Save viewport..." msgstr "儲存視口…" #: 3d-viewer/3d_viewer/3d_toolbar.cpp:69 #: pcbnew/widgets/appearance_controls.cpp:2741 msgid "Delete viewport..." msgstr "刪除視口…" #: 3d-viewer/3d_viewer/3d_toolbar.cpp:71 #, c-format msgid "" "Save and restore view orientation and zoom.\n" "Use %s+Tab to activate selector.\n" "Successive Tabs while holding %s down will cycle through viewports in the " "popup." msgstr "" "儲存並恢復檢視方向和縮放。\n" "使用 %s+Tab 啟用選擇器。\n" "按下 %s 時，連續的選項卡將在彈出視窗的視口中迴圈。" #: 3d-viewer/3d_viewer/3d_toolbar.cpp:83 msgid "Reload board" msgstr "重新載入電路板" #: 3d-viewer/3d_viewer/3d_toolbar.cpp:88 msgid "Copy 3D image to clipboard" msgstr "複製 3D 影象到剪貼簿" #: 3d-viewer/3d_viewer/3d_toolbar.cpp:93 msgid "Render current view using Raytracing" msgstr "使用光線追蹤渲染當前檢視" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:101 #: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:73 msgid "KiCad 3D Viewer" msgstr "KiCad 3D 檢視器" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:522 #: pcbnew/widgets/appearance_controls.cpp:2789 msgid "Viewport name:" msgstr "視口名稱：" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:522 #: pcbnew/widgets/appearance_controls.cpp:2789 msgid "Save Viewport" msgstr "儲存視口" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:561 #: pcbnew/widgets/appearance_controls.cpp:2828 msgid "Viewports" msgstr "視口" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:570 #: pcbnew/widgets/appearance_controls.cpp:2837 msgid "Delete Viewport" msgstr "刪除視口" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:571 #: pcbnew/widgets/appearance_controls.cpp:2838 msgid "Select viewport:" msgstr "選擇視口：" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:773 msgid "3D Image File Name" msgstr "3D 影象檔名稱" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:794 #: common/eda_base_frame.cpp:1212 common/eda_base_frame.cpp:1216 #: pcbnew/plugins/altium/altium_pcb.cpp:1669 #, c-format msgid "Insufficient permissions to save file '%s'." msgstr "無足夠許可權儲存檔案 '%s'。" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:795 common/confirm.cpp:151 #: common/confirm.cpp:341 common/dialogs/panel_setup_severities.cpp:43 #: eeschema/files-io.cpp:847 eeschema/files-io.cpp:920 #: kicad/import_proj.cpp:153 kicad/import_project.cpp:102 kicad/kicad.cpp:313 #: kicad/tools/kicad_manager_control.cpp:172 #: kicad/tools/kicad_manager_control.cpp:238 #: kicad/tools/kicad_manager_control.cpp:284 #: pcb_calculator/calculator_panels/panel_fusing_current.cpp:166 #: pcb_calculator/calculator_panels/panel_fusing_current.cpp:179 #: pcb_calculator/calculator_panels/panel_fusing_current.cpp:191 #: pcb_calculator/calculator_panels/panel_fusing_current.cpp:203 #: pcbnew/pcb_marker.cpp:205 msgid "Error" msgstr "錯誤" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:828 msgid "Failed to copy image to clipboard" msgstr "無法將影象複製到剪貼簿" #: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:839 msgid "Can't save file" msgstr "無法儲存檔案" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:43 msgid "Center pivot rotation" msgstr "中心軸旋轉" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:43 msgid "Center pivot rotation (middle mouse click)" msgstr "中心軸旋轉 (點選滑鼠中鍵)" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:48 msgid "Rotate X Clockwise" msgstr "沿 X 軸順時針旋轉" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:53 msgid "Rotate X Counterclockwise" msgstr "沿 X 軸逆時針旋轉" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:58 msgid "Rotate Y Clockwise" msgstr "沿 Y 軸順時針旋轉" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:63 msgid "Rotate Y Counterclockwise" msgstr "沿 Y 軸逆時針旋轉" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:68 msgid "Rotate Z Clockwise" msgstr "沿 Z 軸順時針旋轉" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:73 msgid "Rotate Z Counterclockwise" msgstr "沿 Z 軸逆時針旋轉" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:79 msgid "Move board Left" msgstr "左移電路板" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:85 msgid "Move board Right" msgstr "右移電路板" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:91 msgid "Move board Up" msgstr "上移電路板" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:97 msgid "Move board Down" msgstr "下移電路板" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:103 msgid "Home view" msgstr "主檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:109 msgid "Reset view" msgstr "重置檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:115 msgid "Flip Board" msgstr "翻轉電路板" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:115 msgid "Flip the board view" msgstr "翻轉電路板檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:120 msgid "Toggle orthographic projection" msgstr "切換正交投影" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:120 #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:208 msgid "Enable/disable orthographic projection" msgstr "啟用/禁用正交投影" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:126 msgid "View Front" msgstr "正檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:132 msgid "View Back" msgstr "後檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:138 msgid "View Left" msgstr "左檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:144 msgid "View Right" msgstr "右檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:150 msgid "View Top" msgstr "頂檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:156 msgid "View Bottom" msgstr "底檢視" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:161 msgid "No 3D Grid" msgstr "不顯示 3D 網格" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:166 msgid "3D Grid 10mm" msgstr "3D 網格 10mm" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:171 msgid "3D Grid 5mm" msgstr "3D 網格 5mm" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:176 msgid "3D Grid 2.5mm" msgstr "3D 網格 2.5mm" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:181 msgid "3D Grid 1mm" msgstr "3D 網格 1mm" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:187 msgid "Render Realistic Materials" msgstr "渲染 Realistic 材料" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:188 msgid "Use all material properties from each 3D model file" msgstr "使用每個 3D 模型檔案中的所有材質屬性" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:194 msgid "Render Solid Colors" msgstr "渲染單色" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:195 #, fuzzy msgid "Use only the diffuse color property from 3D model file" msgstr "僅使用 3D 模型檔案中的漫反射顏色屬性" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:201 msgid "Render CAD Colors" msgstr "渲染 CAD 顏色" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:202 msgid "Use a CAD color style based on the diffuse color of the material" msgstr "根據材質的漫反射顏色使用 CAD 顏色樣式" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:208 msgid "Toggle Through Hole 3D models" msgstr "切換直插通孔 3D 模型" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:209 msgid "Toggle 3D models for 'Through hole' type components" msgstr "切換 '通孔' 型元件的 3D 模型" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:215 msgid "Toggle SMD 3D models" msgstr "切換貼片(SMD) 3D 模型" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:216 msgid "Toggle 3D models for 'Surface mount' type components" msgstr "切換 '表面貼裝' 型元件的 3D 模型" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:222 msgid "Toggle unspecified 3D models" msgstr "切換未指定的 3D 模型" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:222 msgid "Toggle 3D models for 'unspecified' type components" msgstr "切換 '未指定' 型元件的 3D 模型" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:228 msgid "Toggle 3D models not in pos file" msgstr "切換不在 pos 檔案中的 3D 模型" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:233 msgid "Show Model Bounding Boxes" msgstr "顯示模型邊框" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:238 msgid "Toggle realistic mode" msgstr "切換真真實模式" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:242 msgid "Toggle board body display" msgstr "切換電路板顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:246 msgid "Show 3D Axis" msgstr "顯示 3D 軸線" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:251 msgid "Toggle zone display" msgstr "切換敷銅顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:255 msgid "Toggle adhesive display" msgstr "切換膠粘層顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:255 msgid "Toggle display of adhesive layers" msgstr "切換膠粘層的顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:259 msgid "Toggle silkscreen display" msgstr "切換絲印層顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:259 msgid "Toggle display of silkscreen layers" msgstr "切換絲印層的顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:263 msgid "Toggle solder mask display" msgstr "切換阻焊層顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:263 msgid "Toggle display of solder mask layers" msgstr "切換阻焊層的顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:267 msgid "Toggle solder paste display" msgstr "切換錫膏層顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:267 msgid "Toggle display of solder paste layers" msgstr "切換錫膏層的顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:271 msgid "Toggle comments display" msgstr "切換註釋和繪圖層顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:271 msgid "Toggle display of comments and drawings layers" msgstr "切換註釋和繪圖層的顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:275 msgid "Toggle ECO display" msgstr "切換 ECO 層顯示" #: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:275 msgid "Toggle display of ECO layers" msgstr "切換 ECO 層的顯示" #: 3d-viewer/dialogs/dialog_select_3d_model.cpp:95 #, c-format msgid "All supported files (%s)" msgstr "所有支援的檔案 (%s)" #: 3d-viewer/dialogs/dialog_select_3d_model_base.cpp:58 msgid "Available paths:" msgstr "可用路徑：" #: 3d-viewer/dialogs/dialog_select_3d_model_base.cpp:67 #: common/dialogs/dialog_configure_paths_base.h:61 msgid "Configure Paths" msgstr "配置路徑" #: 3d-viewer/dialogs/dialog_select_3d_model_base.h:63 msgid "Select 3D Model" msgstr "選擇 3D 模型" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:19 msgid "Environment Colors" msgstr "環境色彩" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:31 msgid "Background gradient start:" msgstr "背景梯度起點：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:38 msgid "Background gradient end:" msgstr "背景梯度終點：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:51 msgid "Solder paste:" msgstr "焊膏：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:64 msgid "Board Colors" msgstr "基板顏色" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:71 msgid "Use board stackup colors" msgstr "使用電路板層疊顏色" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:74 msgid "Use colors:" msgstr "使用顏色：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:82 msgid "Silkscreen top:" msgstr "絲印層頂部：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:89 msgid "Silkscreen bottom:" msgstr "絲印層底部：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:102 msgid "Solder mask top:" msgstr "阻焊層頂部：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:109 msgid "Solder mask bottom:" msgstr "阻焊層底部：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:122 msgid "Copper/surface finish:" msgstr "銅/表面光潔度：" #: 3d-viewer/dialogs/panel_3D_colors_base.cpp:135 msgid "Board body:" msgstr "電路板主體：" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:23 msgid "Board Layers" msgstr "電路板層" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:35 msgid "Show silkscreen layers" msgstr "顯示絲印層" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:38 msgid "Clip silkscreen at solder mask edges" msgstr "將絲印夾在阻焊層邊緣" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:41 msgid "Clip silkscreen at via annuli" msgstr "剪去過孔環的絲印" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:44 msgid "Show solder mask layers" msgstr "顯示阻焊層" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:47 msgid "Show solder paste layers" msgstr "顯示錫膏層" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:50 msgid "Show adhesive layers" msgstr "顯示膠粘層" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:59 msgid "User Layers (not shown in realistic mode)" msgstr "使用者圖層 (在真實渲染模式中不顯示)" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:69 msgid "Show comment and drawing layers" msgstr "顯示註釋和繪圖層" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:75 msgid "Show ECO layers" msgstr "顯示 ECO 層" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:81 msgid "Render Options" msgstr "渲染選項" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:93 msgid "Show board body" msgstr "顯示電路板" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:96 msgid "Realistic mode" msgstr "真實渲染模式" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:99 msgid "Show filled areas in zones" msgstr "顯示敷銅中的填充敷銅" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:102 msgid "Use bare copper color for unplated copper" msgstr "對非電鍍的銅使用裸銅色" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:103 msgid "Use different colors for plated and unplated copper. (Slow)" msgstr "對鍍銅和非鍍銅使用不同的顏色。 (慢)" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:110 msgid "Material properties:" msgstr "材料屬性：" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:114 msgid "Realistic" msgstr "真實渲染模式" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:114 msgid "Solid colors" msgstr "單色" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:114 msgid "CAD colors" msgstr "CAD 顏色" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:132 msgid "Camera Options" msgstr "相機選項" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:142 msgid "Rotation increment:" msgstr "旋轉增量：" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:150 #: pcb_calculator/widgets/unit_selector.cpp:130 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:303 #: pcbnew/dialogs/dialog_create_array_base.cpp:259 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:151 #: pcbnew/dialogs/dialog_move_exact_base.cpp:59 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:251 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:345 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:776 #: pcbnew/dialogs/panel_edit_options_base.cpp:61 msgid "deg" msgstr "度" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:160 msgid "Enable animation" msgstr "啟用動畫" #: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:170 msgid "Animation speed:" msgstr "動畫速度：" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:19 #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:17 msgid "Rendering Options" msgstr "渲染選項" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:32 msgid "Show model bounding boxes" msgstr "顯示模型邊框" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:35 msgid "Show copper and tech layers thickness (very slow)" msgstr "顯示銅層和技術層厚度 (非常慢)" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:38 msgid "Highlight items on rollover" msgstr "翻轉時高亮顯示條目" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:44 msgid "Anti-aliasing:" msgstr "抗鋸齒：" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48 msgid "Disabled" msgstr "禁用" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48 msgid "2x" msgstr "2x" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48 msgid "4x" msgstr "4x" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48 msgid "8x" msgstr "8x" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:52 msgid "3D-Viewer must be closed and re-opened to apply this setting" msgstr "必須關閉並重新開啟 3D 檢視器才能應用此設定" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:56 msgid "Selection color:" msgstr "選區顏色：" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:72 msgid "While Moving" msgstr "在移動時" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:85 msgid "Disable anti-aliasing" msgstr "禁用抗鋸齒" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:88 msgid "Disable thickness" msgstr "禁用厚度" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:91 msgid "Disable vias" msgstr "禁用過孔" #: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:94 msgid "Disable holes" msgstr "禁用通孔" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:27 msgid "Procedural textures (slow)" msgstr "過程紋理 (慢)" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:31 msgid "Add floor (slow)" msgstr "新增基板 (慢)" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:35 msgid "Anti-aliasing (slow)" msgstr "抗鋸齒 (慢)" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:39 msgid "" "Screen space ambient occlusions and global illumination reflections (slow)" msgstr "螢幕空間環境光遮蔽和全域性光照反射 (慢)" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:54 msgid "Number of Samples" msgstr "取樣數" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:58 msgid "Spread Factor %" msgstr "擴散係數 %" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:62 msgid "Recursion Level" msgstr "遞迴層級" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:66 msgid "Shadows:" msgstr "陰影：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:71 msgid "" "Number of rays that will be cast, into light direction, to evaluate a shadow " "point" msgstr "將投射到燈光方向以計算陰影點的光線數" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:81 msgid "Reflections:" msgstr "反射：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:86 msgid "Number of rays that will be cast to evaluate a reflection point" msgstr "將投射以計算反射點的光線數" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:94 msgid "" "Interactions number that a ray can travel through objects. (higher number of " "levels improve results, specially on very transparent boards)" msgstr "" "一束光線所能穿過的物體數量。(遞迴深度越大，效果越好，特別是在非常透明的板上)" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:98 msgid "Refractions:" msgstr "折射：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:103 msgid "Number of rays that will be cast to evaluate a refraction point" msgstr "將投射以計算折射點的光線數" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:111 msgid "Number of bounces that a ray can hit reflective objects" msgstr "一束光線所能在反光的物體上反射的次數" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:121 msgid "Lights Configuration" msgstr "燈光配置" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:134 msgid "Ambient camera light:" msgstr "相機環境光：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:146 msgid "Top light:" msgstr "頂部光：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:158 msgid "Bottom light:" msgstr "底部光：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:184 #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:201 msgid "Elevation (deg)" msgstr "海拔 (度)" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:188 #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:205 msgid "Azimuth (deg)" msgstr "方位角 (度)" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:209 msgid "Light 1:" msgstr "淺色 1：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:227 msgid "Light 5:" msgstr "淺色 5：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:242 msgid "Light 2:" msgstr "淺色 2：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:260 msgid "Light 6:" msgstr "淺色 6：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:275 msgid "Light 3:" msgstr "淺色 3：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:293 msgid "Light 7:" msgstr "淺色 7：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:308 msgid "Light 4:" msgstr "淺色 4：" #: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:326 msgid "Light 8:" msgstr "淺色 8：" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:21 #: common/dialogs/dialog_print_generic_base.cpp:56 pcbnew/pcb_bitmap.cpp:254 msgid "Scale" msgstr "比例" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:29 #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:74 #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:119 #: common/dialogs/dialog_grid_settings_base.cpp:34 #: pagelayout_editor/dialogs/properties_frame_base.cpp:248 #: pagelayout_editor/dialogs/properties_frame_base.cpp:301 #: pcbnew/dialogs/dialog_export_vrml_base.cpp:73 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:115 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:33 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:59 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:85 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:111 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:34 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:60 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:86 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:112 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:219 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:421 #: pcbnew/import_gfx/dialog_import_gfx_base.cpp:62 #: pcbnew/microwave/microwave_polygon.cpp:145 msgid "X:" msgstr "X：" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:39 #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:84 #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:129 #: common/dialogs/dialog_grid_settings_base.cpp:45 #: pagelayout_editor/dialogs/properties_frame_base.cpp:259 #: pagelayout_editor/dialogs/properties_frame_base.cpp:312 #: pcbnew/dialogs/dialog_export_vrml_base.cpp:88 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:126 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:44 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:70 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:96 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:122 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:45 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:71 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:97 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:123 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:230 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:70 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:322 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:382 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:432 #: pcbnew/import_gfx/dialog_import_gfx_base.cpp:83 #: pcbnew/microwave/microwave_polygon.cpp:154 msgid "Y:" msgstr "Y：" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:49 #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:94 #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:139 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:328 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:340 msgid "Z:" msgstr "Z：" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:66 #: gerbview/gerber_draw_item.cpp:674 pcbnew/footprint.cpp:1074 #: pcbnew/pad.cpp:1028 msgid "Rotation" msgstr "旋轉" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:111 msgid "Offset" msgstr "偏移" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:156 msgid "Opacity" msgstr "不透明度" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:165 msgid "Board Thickness" msgstr "電路板厚度" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:170 #: bitmap2component/bitmap2cmp_gui.cpp:152 #: common/dialogs/dialog_grid_settings_base.cpp:41 #: common/dialogs/dialog_grid_settings_base.cpp:52 #: common/dialogs/dialog_grid_settings_base.cpp:98 #: common/dialogs/dialog_grid_settings_base.cpp:109 #: common/eda_draw_frame.cpp:626 #: eeschema/dialogs/dialog_field_properties_base.cpp:219 #: eeschema/dialogs/dialog_field_properties_base.cpp:253 #: eeschema/dialogs/dialog_field_properties_base.cpp:264 #: eeschema/dialogs/dialog_label_properties_base.cpp:256 #: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:53 #: eeschema/dialogs/dialog_lib_text_properties_base.cpp:169 #: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:177 #: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:220 #: eeschema/dialogs/dialog_plot_schematic_base.cpp:108 #: eeschema/dialogs/dialog_plot_schematic_base.cpp:147 #: eeschema/dialogs/dialog_shape_properties_base.cpp:52 #: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:127 #: eeschema/dialogs/dialog_text_properties_base.cpp:187 #: eeschema/dialogs/dialog_text_properties_base.cpp:227 #: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:31 #: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:40 #: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:54 #: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:100 #: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:114 #: pagelayout_editor/dialogs/properties_frame_base.cpp:168 #: pagelayout_editor/dialogs/properties_frame_base.cpp:179 #: pagelayout_editor/dialogs/properties_frame_base.cpp:192 #: pagelayout_editor/dialogs/properties_frame_base.cpp:205 #: pagelayout_editor/dialogs/properties_frame_base.cpp:255 #: pagelayout_editor/dialogs/properties_frame_base.cpp:266 #: pagelayout_editor/dialogs/properties_frame_base.cpp:308 #: pagelayout_editor/dialogs/properties_frame_base.cpp:319 #: pagelayout_editor/dialogs/properties_frame_base.cpp:361 #: pagelayout_editor/dialogs/properties_frame_base.cpp:427 #: pagelayout_editor/dialogs/properties_frame_base.cpp:440 #: pagelayout_editor/dialogs/properties_frame_base.cpp:484 #: pagelayout_editor/dialogs/properties_frame_base.cpp:498 #: pagelayout_editor/dialogs/properties_frame_base.cpp:512 #: pagelayout_editor/dialogs/properties_frame_base.cpp:526 #: pagelayout_editor/dialogs/properties_frame_base.cpp:561 #: pagelayout_editor/dialogs/properties_frame_base.cpp:575 #: pagelayout_editor/dialogs/properties_frame_base.cpp:589 #: pagelayout_editor/dialogs/properties_frame_base.cpp:603 #: pagelayout_editor/pl_editor_frame.cpp:752 #: pcb_calculator/widgets/unit_selector.cpp:34 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:147 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:171 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:206 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:219 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:249 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:262 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:314 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:325 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:375 #: pcbnew/dialogs/dialog_create_array_base.cpp:55 #: pcbnew/dialogs/dialog_create_array_base.cpp:66 #: pcbnew/dialogs/dialog_create_array_base.cpp:77 #: pcbnew/dialogs/dialog_create_array_base.cpp:88 #: pcbnew/dialogs/dialog_create_array_base.cpp:223 #: pcbnew/dialogs/dialog_create_array_base.cpp:234 #: pcbnew/dialogs/dialog_create_array_base.cpp:246 #: pcbnew/dialogs/dialog_export_idf_base.cpp:48 #: pcbnew/dialogs/dialog_export_step_base.cpp:65 #: pcbnew/dialogs/dialog_export_vrml_base.cpp:67 #: pcbnew/dialogs/dialog_export_vrml_base.cpp:109 #: pcbnew/dialogs/dialog_move_exact_base.cpp:31 #: pcbnew/dialogs/dialog_move_exact_base.cpp:45 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:66 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:77 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:121 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:168 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:318 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:329 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:378 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:389 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:428 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:439 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:471 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:610 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:623 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:636 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:754 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:765 #: pcbnew/dialogs/dialog_plot_base.cpp:255 #: pcbnew/dialogs/dialog_plot_base.cpp:308 #: pcbnew/dialogs/dialog_position_relative_base.cpp:73 #: pcbnew/dialogs/dialog_position_relative_base.cpp:90 #: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:135 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:55 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:72 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:89 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:105 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:121 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:137 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:153 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:194 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:210 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:251 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:267 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:308 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:322 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:336 #: pcbnew/dialogs/panel_setup_constraints_base.cpp:379 #: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:65 #: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:80 #: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:91 #: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:112 #: pcbnew/import_gfx/dialog_import_gfx_base.cpp:79 #: pcbnew/import_gfx/dialog_import_gfx_base.cpp:100 #: pcbnew/import_gfx/dialog_import_gfx_base.cpp:190 #: pcbnew/teardrop/dialog_teardrop_base.cpp:79 #: pcbnew/teardrop/dialog_teardrop_base.cpp:90 #: pcbnew/teardrop/dialog_teardrop_base.cpp:183 #: pcbnew/teardrop/dialog_teardrop_base.cpp:194 #: pcbnew/teardrop/dialog_teardrop_base.cpp:287 #: pcbnew/teardrop/dialog_teardrop_base.cpp:298 #: pcbnew/tools/convert_tool.cpp:81 pcbnew/tools/convert_tool.cpp:86 msgid "mm" msgstr "mm" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:187 #: common/dialogs/dialog_page_settings_base.cpp:120 #: eeschema/dialogs/dialog_print_using_printer.cpp:281 #: pagelayout_editor/dialogs/dialogs_for_printing.cpp:252 msgid "Preview" msgstr "預覽" #: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:237 msgid "Reload board and 3D models" msgstr "重新載入電路板和 3D 模型" #: bitmap2component/bitmap2cmp_gui.cpp:152 #: pcbnew/dialogs/dialog_export_vrml_base.cpp:109 msgid "Inch" msgstr "英寸" #: bitmap2component/bitmap2cmp_gui.cpp:152 msgid "DPI" msgstr "DPI" #: bitmap2component/bitmap2cmp_gui.cpp:218 common/tool/actions.cpp:61 msgid "Open..." msgstr "開啟..." #: bitmap2component/bitmap2cmp_gui.cpp:219 msgid "Load source image" msgstr "載入源圖片" #: bitmap2component/bitmap2cmp_gui.cpp:228 common/hotkey_store.cpp:57 #: common/tool/action_menu.cpp:226 common/tool/actions.cpp:114 msgid "Quit" msgstr "退出" #: bitmap2component/bitmap2cmp_gui.cpp:229 msgid "Quit Image Converter" msgstr "退出圖片轉換器" #: bitmap2component/bitmap2cmp_gui.cpp:374 #: eeschema/tools/sch_drawing_tools.cpp:594 #: pagelayout_editor/pl_editor_frame.cpp:860 pcbnew/tools/drawing_tool.cpp:665 msgid "Choose Image" msgstr "選擇圖片" #: bitmap2component/bitmap2cmp_gui.cpp:375 #: eeschema/tools/sch_drawing_tools.cpp:595 #: pagelayout_editor/pl_editor_frame.cpp:861 pcbnew/tools/drawing_tool.cpp:666 msgid "Image Files" msgstr "圖片檔案" #: bitmap2component/bitmap2cmp_gui.cpp:713 msgid "Unable to export to the Clipboard" msgstr "無法匯出到剪貼簿" #: bitmap2component/bitmap2cmp_gui.cpp:738 msgid "Create Logo File" msgstr "建立 Logo 檔案" #: bitmap2component/bitmap2cmp_gui.cpp:755 #: bitmap2component/bitmap2cmp_gui.cpp:791 #: bitmap2component/bitmap2cmp_gui.cpp:826 #: bitmap2component/bitmap2cmp_gui.cpp:861 #, c-format msgid "File '%s' could not be created." msgstr "無法建立檔案'%s'。" #: bitmap2component/bitmap2cmp_gui.cpp:775 msgid "Create PostScript File" msgstr "建立 PostScript 檔案" #: bitmap2component/bitmap2cmp_gui.cpp:811 msgid "Create Symbol Library" msgstr "建立符號庫" #: bitmap2component/bitmap2cmp_gui.cpp:846 msgid "Create Footprint Library" msgstr "建立封裝庫" #: bitmap2component/bitmap2cmp_gui.cpp:884 msgid "Error allocating memory for potrace bitmap" msgstr "為 potrace 點陣圖分配記憶體時出錯" #: bitmap2component/bitmap2cmp_gui.cpp:911 #: common/widgets/wx_html_report_panel_base.cpp:41 #: eeschema/dialogs/dialog_erc_base.cpp:127 gerbview/files.cpp:399 #: gerbview/readgerb.cpp:76 #: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1234 #: pcbnew/dialogs/dialog_drc_base.cpp:177 #: pcbnew/dialogs/dialog_footprint_checker_base.cpp:43 msgid "Errors" msgstr "錯誤" #: bitmap2component/bitmap2cmp_gui_base.cpp:24 msgid "Original Picture" msgstr "原始圖片" #: bitmap2component/bitmap2cmp_gui_base.cpp:27 msgid "Greyscale Picture" msgstr "灰度圖片" #: bitmap2component/bitmap2cmp_gui_base.cpp:30 msgid "Black && White Picture" msgstr "黑白圖片" #: bitmap2component/bitmap2cmp_gui_base.cpp:38 msgid "Image Information" msgstr "圖片資訊" #: bitmap2component/bitmap2cmp_gui_base.cpp:47 msgid "Image size:" msgstr "圖片尺寸：" #: bitmap2component/bitmap2cmp_gui_base.cpp:51 #: bitmap2component/bitmap2cmp_gui_base.cpp:55 #: bitmap2component/bitmap2cmp_gui_base.cpp:67 #: bitmap2component/bitmap2cmp_gui_base.cpp:71 #: bitmap2component/bitmap2cmp_gui_base.cpp:83 msgid "0000" msgstr "0000" #: bitmap2component/bitmap2cmp_gui_base.cpp:59 msgid "pixels" msgstr "畫素" #: bitmap2component/bitmap2cmp_gui_base.cpp:63 msgid "Image PPI:" msgstr "圖片畫素密度：" #: bitmap2component/bitmap2cmp_gui_base.cpp:75 msgid "PPI" msgstr "畫素密度" #: bitmap2component/bitmap2cmp_gui_base.cpp:79 msgid "BPP:" msgstr "畫素深度：" #: bitmap2component/bitmap2cmp_gui_base.cpp:87 msgid "bits" msgstr "位" #: bitmap2component/bitmap2cmp_gui_base.cpp:100 msgid "Load Source Image" msgstr "載入源圖片" #: bitmap2component/bitmap2cmp_gui_base.cpp:107 msgid "Output Size" msgstr "輸出尺寸" #: bitmap2component/bitmap2cmp_gui_base.cpp:109 msgid "Lock height / width ratio" msgstr "鎖定高/寬度比" #: bitmap2component/bitmap2cmp_gui_base.cpp:115 #: common/dialogs/dialog_page_settings_base.cpp:34 #: pcbnew/dialogs/dialog_target_properties_base.cpp:28 msgid "Size:" msgstr "尺寸：" #: bitmap2component/bitmap2cmp_gui_base.cpp:119 #: bitmap2component/bitmap2cmp_gui_base.cpp:124 msgid "300" msgstr "300" #: bitmap2component/bitmap2cmp_gui_base.cpp:143 #: common/dialogs/dialog_print_generic_base.cpp:24 #: eeschema/dialogs/dialog_annotate_base.cpp:89 #: eeschema/dialogs/dialog_plot_schematic_base.cpp:49 #: eeschema/dialogs/dialog_update_from_pcb_base.cpp:25 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:49 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:99 #: include/lib_table_grid.h:191 #: pcbnew/dialogs/dialog_board_reannotate_base.cpp:200 #: pcbnew/dialogs/dialog_export_svg_base.cpp:79 #: pcbnew/dialogs/dialog_import_netlist_base.cpp:51 #: pcbnew/dialogs/dialog_pns_settings_base.cpp:26 #: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:23 #: pcbnew/dialogs/dialog_update_pcb_base.cpp:25 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:49 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:98 #: pcbnew/teardrop/dialog_teardrop_base.cpp:376 msgid "Options" msgstr "選項" #: bitmap2component/bitmap2cmp_gui_base.cpp:145 msgid "Black / white threshold:" msgstr "黑/白閾值：" #: bitmap2component/bitmap2cmp_gui_base.cpp:150 msgid "" "Adjust the level to convert the greyscale picture to a black and white " "picture." msgstr "移動滑桿以調整灰度圖片轉換為黑白圖片的程度。" #: bitmap2component/bitmap2cmp_gui_base.cpp:154 #: gerbview/gerber_file_image.cpp:338 msgid "Negative" msgstr "負片" #: bitmap2component/bitmap2cmp_gui_base.cpp:160 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:525 msgid "Front silk screen" msgstr "頂層絲印" #: bitmap2component/bitmap2cmp_gui_base.cpp:160 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:531 msgid "Front solder mask" msgstr "頂層阻焊" #: bitmap2component/bitmap2cmp_gui_base.cpp:160 msgid "User layer Eco1" msgstr "ECO1 使用者層" #: bitmap2component/bitmap2cmp_gui_base.cpp:160 msgid "User layer Eco2" msgstr "ECO2 使用者層" #: bitmap2component/bitmap2cmp_gui_base.cpp:162 msgid "Board Layer for Outline" msgstr "輪廓層" #: bitmap2component/bitmap2cmp_gui_base.cpp:164 msgid "" "Choose the board layer to place the outline.\n" "The reference designator and value are always placed on the silk screen " "layer (but will be marked invisible)." msgstr "" "選擇要放置輪廓的電路板圖層。\n" "位號和值始終放置在絲印層上（但會被標記為不可見）。" #: bitmap2component/bitmap2cmp_gui_base.cpp:168 msgid "Symbol (.kicad_sym file)" msgstr "符號 (.kicad_sym 檔案)" #: bitmap2component/bitmap2cmp_gui_base.cpp:168 msgid "Footprint (.kicad_mod file)" msgstr "封裝 (.kicad_mod 檔案)" #: bitmap2component/bitmap2cmp_gui_base.cpp:168 msgid "Postscript (.ps file)" msgstr "Postscript (.ps 檔案)" #: bitmap2component/bitmap2cmp_gui_base.cpp:168 msgid "Drawing Sheet (.kicad_wks file)" msgstr "圖紙 (.kicad_wks file)" #: bitmap2component/bitmap2cmp_gui_base.cpp:170 #: eeschema/dialogs/dialog_plot_schematic_base.cpp:44 msgid "Output Format" msgstr "輸出格式" #: bitmap2component/bitmap2cmp_gui_base.cpp:174 msgid "Export to File" msgstr "匯出到檔案" #: bitmap2component/bitmap2cmp_gui_base.cpp:177 #: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:147 msgid "Export to Clipboard" msgstr "匯出到剪貼簿" #: bitmap2component/bitmap2cmp_gui_base.h:96 #: kicad/tools/kicad_manager_actions.cpp:110 msgid "Image Converter" msgstr "圖片轉換器" #: common/common.cpp:252 #, c-format msgid "" "Environment variables expansion failed: missing '%c' at position %u in '%s'." msgstr "環境變數擴充套件失敗：缺少 \"%c\" , 位置 \"%u\" （在 \"%s\" 內）。" #: common/common.cpp:340 #, c-format msgid "Cannot make path '%s' absolute with respect to '%s'." msgstr "不能使路徑 '%s' 相對 '%s' 絕對。" #: common/common.cpp:359 #, c-format msgid "Output directory '%s' created." msgstr "已建立輸出目錄 \"%s\" 。" #: common/common.cpp:368 #, c-format msgid "Cannot create output directory '%s'." msgstr "無法建立輸出目錄 \"%s\"。" #: common/common.cpp:640 msgid "This operating system is not supported by KiCad and its dependencies." msgstr "KiCad 及其依賴庫不支援此作業系統。" #: common/common.cpp:642 msgid "Unsupported Operating System" msgstr "不支援的作業系統" #: common/common.cpp:645 msgid "" "Any issues with KiCad on this system cannot be reported to the official " "bugtracker." msgstr "無法將這個系統上任何 KiCad 的問題報告至官方 bugtracker。" #: common/confirm.cpp:78 msgid "Do not show again" msgstr "不再顯示" #: common/confirm.cpp:148 msgid "Message" msgstr "訊息" #: common/confirm.cpp:149 msgid "Question" msgstr "問題" #: common/confirm.cpp:150 common/confirm.cpp:317 #: common/dialogs/panel_setup_severities.cpp:43 #: eeschema/dialogs/dialog_plot_schematic.cpp:453 #: eeschema/dialogs/dialog_plot_schematic.cpp:466 #: eeschema/dialogs/dialog_plot_schematic.cpp:488 #: eeschema/dialogs/dialog_sim_command.cpp:282 #: eeschema/dialogs/panel_eeschema_color_settings.cpp:146 #: eeschema/files-io.cpp:407 eeschema/sheet.cpp:641 #: eeschema/symbol_editor/symbol_editor.cpp:498 #: eeschema/symbol_editor/symbol_editor.cpp:769 #: eeschema/symbol_editor/symbol_editor.cpp:1206 #: pcbnew/dialogs/dialog_export_vrml.cpp:182 #: pcbnew/import_gfx/dialog_import_gfx.cpp:270 pcbnew/pcb_marker.cpp:202 #: pcbnew/plugins/kicad/pcb_parser.cpp:920 msgid "Warning" msgstr "警告" #: common/confirm.cpp:181 common/confirm.cpp:187 msgid "File Open Warning" msgstr "檔案開啟警告" #: common/confirm.cpp:183 common/confirm.cpp:189 msgid "Interleaved saves may produce very unexpected results." msgstr "交錯儲存可能會產生出乎意料的結果。" #: common/confirm.cpp:185 common/confirm.cpp:190 common/confirm.cpp:254 #: common/confirm.cpp:281 common/tool/actions.cpp:121 #: eeschema/dialogs/dialog_erc.cpp:392 #: eeschema/dialogs/dialog_symbol_fields_table.cpp:1394 #: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:168 #: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:66 #: pcbnew/dialogs/dialog_drc.cpp:298 #: pcbnew/dialogs/dialog_unused_pad_layers.cpp:53 #: pcbnew/plugins/kicad/pcb_parser.cpp:923 pcbnew/router/router_tool.cpp:571 msgid "Cancel" msgstr "取消" #: common/confirm.cpp:185 common/confirm.cpp:190 msgid "Open Anyway" msgstr "仍要開啟" #: common/confirm.cpp:201 common/confirm.cpp:238 msgid "Save Changes?" msgstr "儲存變更嗎？" #: common/confirm.cpp:203 common/confirm.cpp:240 msgid "If you don't save, all your changes will be permanently lost." msgstr "如果不儲存，所有變更將永久丟失。" #: common/confirm.cpp:205 common/confirm.cpp:241 common/tool/actions.cpp:67 #: eeschema/symbol_editor/symbol_editor.cpp:576 #: eeschema/widgets/tuner_slider_base.cpp:117 #: pcbnew/footprint_libraries_utils.cpp:1075 msgid "Save" msgstr "儲存" #: common/confirm.cpp:205 common/confirm.cpp:241 msgid "Discard Changes" msgstr "放棄變更" #: common/confirm.cpp:208 common/confirm.cpp:287 msgid "Apply to all" msgstr "應用於全部" #: common/confirm.cpp:253 msgid "Your current changes will be permanently lost." msgstr "你當前的變更將永久丟失。" #: common/confirm.cpp:254 common/tool/actions.cpp:91 msgid "Revert" msgstr "恢復" #: common/confirm.cpp:280 eeschema/dialogs/dialog_symbol_fields_table.cpp:1393 #: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:164 #: pcbnew/router/router_tool.cpp:571 msgid "OK" msgstr "確定" #: common/confirm.cpp:369 msgid "Information" msgstr "資訊" #: common/confirm.cpp:396 common/confirm.cpp:399 #: eeschema/symbol_editor/symbol_editor.cpp:366 #: eeschema/symbol_editor/symbol_editor.cpp:681 #: eeschema/symbol_editor/symbol_editor_import_export.cpp:102 #: eeschema/symbol_editor/symbol_editor_import_export.cpp:165 #: eeschema/tools/symbol_editor_pin_tool.cpp:241 kicad/import_project.cpp:88 #: kicad/tools/kicad_manager_control.cpp:265 #: pcbnew/dialogs/dialog_export_idf.cpp:162 #: pcbnew/dialogs/dialog_gencad_export_options.cpp:121 #: pcbnew/dialogs/dialog_track_via_properties.cpp:479 #: pcbnew/footprint_libraries_utils.cpp:477 #: pcbnew/footprint_libraries_utils.cpp:1192 pcbnew/router/router_tool.cpp:1824 #: pcbnew/router/router_tool.cpp:2404 pcbnew/zone_filler.cpp:750 msgid "Confirmation" msgstr "確認" #: common/confirm.cpp:403 eeschema/lib_field.cpp:540 eeschema/lib_pin.cpp:1166 #: eeschema/sch_field.cpp:746 eeschema/sch_pin.cpp:223 #: gerbview/gerber_draw_item.cpp:681 gerbview/gerber_draw_item.cpp:682 #: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44 #: pcbnew/fp_text.cpp:299 pcbnew/fp_text.cpp:304 pcbnew/fp_textbox.cpp:312 #: pcbnew/pcb_text.cpp:121 pcbnew/pcb_textbox.cpp:288 #: pcbnew/tools/drawing_stackup_table_tool.cpp:456 #: pcbnew/tools/drawing_stackup_table_tool.cpp:487 #: pcbnew/tools/drawing_stackup_table_tool.cpp:495 #: pcbnew/tools/drawing_stackup_table_tool.cpp:506 msgid "Yes" msgstr "是" #: common/confirm.cpp:403 eeschema/lib_field.cpp:540 eeschema/lib_pin.cpp:1166 #: eeschema/sch_field.cpp:746 eeschema/sch_pin.cpp:223 #: gerbview/gerber_draw_item.cpp:681 gerbview/gerber_draw_item.cpp:682 #: pcbnew/fp_text.cpp:299 pcbnew/fp_text.cpp:304 pcbnew/fp_textbox.cpp:312 #: pcbnew/pcb_text.cpp:121 pcbnew/pcb_textbox.cpp:288 #: pcbnew/tools/drawing_stackup_table_tool.cpp:456 #: pcbnew/tools/drawing_stackup_table_tool.cpp:487 #: pcbnew/tools/drawing_stackup_table_tool.cpp:495 #: pcbnew/tools/drawing_stackup_table_tool.cpp:505 msgid "No" msgstr "否" #: common/dialog_about/AboutDialog_main.cpp:115 #: common/widgets/widget_hotkey_list.cpp:474 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:50 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:100 #: eeschema/sch_symbol.cpp:1701 eeschema/sch_symbol.cpp:2181 #: eeschema/symbol_editor/symbol_editor.cpp:546 #: eeschema/symbol_editor/symbol_editor.cpp:1274 #: eeschema/symbol_viewer_frame.cpp:521 include/lib_table_grid.h:192 #: kicad/pcm/dialogs/panel_package_base.cpp:57 #: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:43 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:50 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:99 #: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:40 #: pcbnew/footprint.cpp:2935 pcbnew/footprint_libraries_utils.cpp:1043 #: pcbnew/footprint_libraries_utils.cpp:1360 pcbnew/plot_board_layers.cpp:101 msgid "Description" msgstr "描述" #: common/dialog_about/AboutDialog_main.cpp:119 msgid "" "The KiCad EDA Suite is a set of open source applications for the creation of " "electronic schematics and printed circuit boards." msgstr "KiCad EDA 工具箱是一套用於建立電路原理圖和印刷電路板的開源應用軟體。" #: common/dialog_about/AboutDialog_main.cpp:127 msgid "KiCad on the web" msgstr "KiCad 相關站點" #: common/dialog_about/AboutDialog_main.cpp:133 msgid "The official KiCad website - " msgstr "KiCad 官方網站 - " #: common/dialog_about/AboutDialog_main.cpp:137 msgid "Developer website - " msgstr "開發人員網站 - " #: common/dialog_about/AboutDialog_main.cpp:142 msgid "Official KiCad library repositories - " msgstr "KiCad 官方庫倉庫 - " #: common/dialog_about/AboutDialog_main.cpp:149 msgid "Bug tracker" msgstr "Bug 追蹤" #: common/dialog_about/AboutDialog_main.cpp:155 msgid "Report or examine bugs - " msgstr "報告或檢查 Bug - " #: common/dialog_about/AboutDialog_main.cpp:161 msgid "KiCad users group and community" msgstr "KiCad 使用者群和社群" #: common/dialog_about/AboutDialog_main.cpp:166 msgid "KiCad forum - " msgstr "KiCad 使用者論壇 - " #: common/dialog_about/AboutDialog_main.cpp:180 msgid "The complete KiCad EDA Suite is released under the" msgstr "完整 KiCad EDA 工具箱的發行，遵循以下許可協議" #: common/dialog_about/AboutDialog_main.cpp:182 msgid "GNU General Public License (GPL) version 3 or any later version" msgstr "GNU 通用公共許可證（GPL）版本 3 或任何更高版本" #: common/dialog_about/AboutDialog_main.cpp:201 msgid "Lead Development Team" msgstr "主要開發團隊" #: common/dialog_about/AboutDialog_main.cpp:202 msgid "Lead Development Alumni" msgstr "前主要開發人員" #: common/dialog_about/AboutDialog_main.cpp:203 msgid "Additional Contributions By" msgstr "附加貢獻" #: common/dialog_about/AboutDialog_main.cpp:1084 msgid "KiCad Librarian Team" msgstr "KiCad 庫團隊" #: common/dialog_about/AboutDialog_main.cpp:1117 msgid "3D models by" msgstr "3D 模型設計" #: common/dialog_about/AboutDialog_main.cpp:1129 msgid "Symbols by" msgstr "符號設計" #: common/dialog_about/AboutDialog_main.cpp:1136 msgid "Footprints by" msgstr "封裝設計" #: common/dialog_about/AboutDialog_main.cpp:1149 msgid "Icons by" msgstr "圖示設計" #: common/dialog_about/dialog_about.cpp:99 #, c-format msgid "About %s" msgstr "關於 %s" #: common/dialog_about/dialog_about.cpp:128 #: common/dialog_about/dialog_about_base.h:58 msgid "About" msgstr "關於" #: common/dialog_about/dialog_about.cpp:133 #: kicad/pcm/dialogs/dialog_pcm_base.cpp:87 #: kicad/pcm/dialogs/panel_packages_view_base.cpp:90 msgid "Version" msgstr "版本" #: common/dialog_about/dialog_about.cpp:135 msgid "Developers" msgstr "開發人員" #: common/dialog_about/dialog_about.cpp:137 msgid "Doc Writers" msgstr "文件人員" #: common/dialog_about/dialog_about.cpp:140 msgid "Librarians" msgstr "制庫人員" #: common/dialog_about/dialog_about.cpp:143 msgid "Artists" msgstr "設計人員" #: common/dialog_about/dialog_about.cpp:145 msgid "Translators" msgstr "翻譯人員" #: common/dialog_about/dialog_about.cpp:147 msgid "Packagers" msgstr "打包人員" #: common/dialog_about/dialog_about.cpp:150 msgid "License" msgstr "許可證" #: common/dialog_about/dialog_about.cpp:464 msgid "Could not open clipboard to write version information." msgstr "無法開啟剪貼簿寫入版本資訊。" #: common/dialog_about/dialog_about.cpp:465 msgid "Clipboard Error" msgstr "剪貼簿錯誤" #: common/dialog_about/dialog_about.cpp:474 msgid "Copied..." msgstr "已複製..." #: common/dialog_about/dialog_about_base.cpp:31 msgid "App Title" msgstr "應用標題" #: common/dialog_about/dialog_about_base.cpp:37 msgid "Copyright Info" msgstr "版權資訊" #: common/dialog_about/dialog_about_base.cpp:41 msgid "Build Version Info" msgstr "構建版本資訊" #: common/dialog_about/dialog_about_base.cpp:45 msgid "Lib Version Info" msgstr "庫版本資訊" #: common/dialog_about/dialog_about_base.cpp:58 msgid "&Copy Version Info" msgstr "複製版本資訊 (&C)" #: common/dialog_about/dialog_about_base.cpp:59 msgid "Copy KiCad version info to the clipboard" msgstr "複製 KiCad 版本資訊到剪貼簿" #: common/dialog_about/dialog_about_base.cpp:63 msgid "&Report Bug" msgstr "報告 Bug (&R)" #: common/dialog_about/dialog_about_base.cpp:64 common/tool/actions.cpp:685 msgid "Report a problem with KiCad" msgstr "報告 KiCad 的問題" #: common/dialog_about/dialog_about_base.cpp:68 common/tool/actions.cpp:679 msgid "Donate" msgstr "捐款" #: common/dialog_about/dialog_about_base.cpp:69 #: common/tool/common_control.cpp:278 msgid "Donate to KiCad" msgstr "向 KiCad 捐款" #: common/dialog_about/dialog_about_base.cpp:94 common/dialog_shim.cpp:665 msgid "&OK" msgstr "確定 (&O)" #: common/dialog_shim.cpp:666 msgid "&Cancel" msgstr "取消 (&C)" #: common/dialog_shim.cpp:667 msgid "&Yes" msgstr "是 (&Y)" #: common/dialog_shim.cpp:668 msgid "&No" msgstr "否(&N)" #: common/dialog_shim.cpp:669 msgid "&Apply" msgstr "應用(&A)" #: common/dialog_shim.cpp:670 msgid "&Save" msgstr "儲存 (&S)" #: common/dialog_shim.cpp:671 common/dialog_shim.cpp:672 #: common/eda_base_frame.cpp:478 msgid "&Help" msgstr "幫助 (&H)" #: common/dialogs/dialog_HTML_reporter_base.h:48 msgid "Report" msgstr "報告" #: common/dialogs/dialog_assign_netclass.cpp:107 msgid "Currently matching nets:" msgstr "當前匹配的網路：" #: common/dialogs/dialog_color_picker.cpp:94 msgid "Clear Color" msgstr "清除顏色" #: common/dialogs/dialog_color_picker_base.cpp:31 msgid "RGB" msgstr "RGB" #: common/dialogs/dialog_color_picker_base.cpp:46 msgid "Red:" msgstr "紅色：" #: common/dialogs/dialog_color_picker_base.cpp:50 msgid "Green:" msgstr "綠色：" #: common/dialogs/dialog_color_picker_base.cpp:54 msgid "Blue:" msgstr "藍色：" #: common/dialogs/dialog_color_picker_base.cpp:74 msgid "HSV" msgstr "HSV" #: common/dialogs/dialog_color_picker_base.cpp:91 msgid "Hue:" msgstr "色調：" #: common/dialogs/dialog_color_picker_base.cpp:95 msgid "Saturation:" msgstr "飽和度：" #: common/dialogs/dialog_color_picker_base.cpp:114 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:29 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:96 #: pcbnew/dialogs/dialog_text_properties.cpp:92 msgid "Value:" msgstr "值：" #: common/dialogs/dialog_color_picker_base.cpp:134 #: common/dialogs/dialog_color_picker_base.h:94 msgid "Color Picker" msgstr "顏色選擇器" #: common/dialogs/dialog_color_picker_base.cpp:154 msgid "Defined Colors" msgstr "自定義顏色" #: common/dialogs/dialog_color_picker_base.cpp:163 msgid "Opacity:" msgstr "不透明度：" #: common/dialogs/dialog_color_picker_base.cpp:182 msgid "Preview (old/new):" msgstr "預覽 (舊/新)：" #: common/dialogs/dialog_color_picker_base.cpp:207 msgid "Reset to Default" msgstr "重置為預設值" #: common/dialogs/dialog_configure_paths.cpp:193 #: common/dialogs/dialog_configure_paths.cpp:251 msgid "Environment variable name cannot be empty." msgstr "環境變數名稱不能為空。" #: common/dialogs/dialog_configure_paths.cpp:201 #: common/dialogs/dialog_configure_paths.cpp:253 msgid "Environment variable path cannot be empty." msgstr "環境變數路徑不能為空。" #: common/dialogs/dialog_configure_paths.cpp:258 msgid "3D search path alias cannot be empty." msgstr "3D 搜尋路徑別名不能為空。" #: common/dialogs/dialog_configure_paths.cpp:260 msgid "3D search path cannot be empty." msgstr "3D 搜尋路徑不能為空。" #: common/dialogs/dialog_configure_paths.cpp:275 msgid "" "This path was defined externally to the running process and\n" "will only be temporarily overwritten." msgstr "" "此路徑是在執行程序外部定義的\n" "只會被暫時覆蓋。" #: common/dialogs/dialog_configure_paths.cpp:277 msgid "" "The next time KiCad is launched, any paths that have already\n" "been defined are honored and any settings defined in the path\n" "configuration dialog are ignored. If you did not intend for\n" "this behavior, either rename any conflicting entries or remove\n" "the external environment variable(s) from your system." msgstr "" "下次啟動 KiCad 時，將支援已定義的\n" "任何路徑，並忽略在路徑配置對話方塊\n" "中定義的任何設定。如果您不打算執\n" "行此行為，請重新命名任何衝突的條目\n" "或從系統中刪除外部環境變數。" #: common/dialogs/dialog_configure_paths.cpp:295 #, c-format msgid "The name %s is reserved, and cannot be used." msgstr "名稱 %s 是保留的，不能使用。" #: common/dialogs/dialog_configure_paths.cpp:399 msgid "" "Enter the name and value for each environment variable. Grey entries are " "names that have been defined externally at the system or user level. " "Environment variables defined at the system or user level take precedence " "over the ones defined in this table. This means the values in this table " "are ignored." msgstr "" "為每個環境變數輸入名稱和路徑。灰色條目為系統或使用者在外部定義的名稱。在系統" "或使用者級定義的環境變數優先於該表中定義。這意味著該表中的值將被忽略。" #: common/dialogs/dialog_configure_paths.cpp:405 msgid "" "To ensure environment variable names are valid on all platforms, the name " "field will only accept upper case letters, digits, and the underscore " "characters." msgstr "" "為了確保環境變數名稱在所有平臺上有效的，名稱欄位只接受大寫字母，數字和下劃線" "字元。" #: common/dialogs/dialog_configure_paths_base.cpp:23 msgid "Environment Variables" msgstr "環境變數" #: common/dialogs/dialog_configure_paths_base.cpp:39 #: common/dialogs/panel_setup_netclasses_base.cpp:51 #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:79 #: eeschema/dialogs/dialog_label_properties_base.cpp:87 #: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:121 #: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:89 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:59 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:60 #: eeschema/dialogs/dialog_symbol_fields_table.cpp:773 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:56 #: eeschema/dialogs/panel_sym_lib_table.cpp:310 #: eeschema/dialogs/panel_template_fieldnames_base.cpp:42 #: eeschema/fields_grid_table.cpp:338 eeschema/lib_pin.cpp:1161 #: eeschema/sch_pin.cpp:218 eeschema/sch_symbol.cpp:1665 #: eeschema/sch_symbol.cpp:1710 eeschema/symbol_editor/symbol_editor.cpp:1246 #: eeschema/symbol_viewer_frame.cpp:519 #: eeschema/widgets/tuner_slider_base.cpp:27 #: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:39 #: kicad/pcm/dialogs/panel_package_base.cpp:50 #: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:42 #: pcbnew/dialogs/dialog_net_inspector.cpp:965 #: pcbnew/dialogs/panel_fp_lib_table.cpp:465 #: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:38 pcbnew/zone.cpp:598 #: pcbnew/zone.cpp:1453 msgid "Name" msgstr "名稱" #: common/dialogs/dialog_configure_paths_base.cpp:40 #: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:41 msgid "Path" msgstr "路徑" #: common/dialogs/dialog_global_lib_table_config.cpp:40 #, c-format msgid "Configure Global %s Library Table" msgstr "配置全域性%s庫表" #: common/dialogs/dialog_global_lib_table_config.cpp:43 #, c-format msgid "" "KiCad has been run for the first time using the new %s library table for\n" "accessing libraries. In order for KiCad to access %s libraries,\n" "you must configure your global %s library table. Please select from one\n" "of the options below. If you are not sure which option to select, please\n" "use the default selection." msgstr "" "KiCad 首次使用新的%s庫表來訪問庫。\n" "為了讓 KiCad 訪問%s庫，\n" "您必須配置全域性%s庫表。\n" "請從以下選項中選擇一個。\n" "如果您不確定要選擇哪個選項，請使用預設選擇。" #: common/dialogs/dialog_global_lib_table_config.cpp:50 #, c-format msgid "Copy default global %s library table (recommended)" msgstr "複製預設的全域性%s庫表 (推薦)" #: common/dialogs/dialog_global_lib_table_config.cpp:52 #, c-format msgid "" "Select this option if you not sure about configuring the global %s library " "table" msgstr "如果你不確定如何配置全域性%s庫表，請選擇此選項" #: common/dialogs/dialog_global_lib_table_config.cpp:56 #, c-format msgid "Copy custom global %s library table" msgstr "複製自定義全域性%s庫表" #: common/dialogs/dialog_global_lib_table_config.cpp:58 #, c-format msgid "" "Select this option to copy a %s library table file other than the default" msgstr "選擇此選項可複製除預設值以外的%s庫表文件" #: common/dialogs/dialog_global_lib_table_config.cpp:62 #, c-format msgid "Create an empty global %s library table" msgstr "建立一個空的全域性%s庫表" #: common/dialogs/dialog_global_lib_table_config.cpp:64 #, c-format msgid "" "Select this option to define %s libraries in project specific library tables" msgstr "選擇此選項可在工程專用庫表中定義%s庫" #: common/dialogs/dialog_global_lib_table_config.cpp:68 #, c-format msgid "Select global %s library table file:" msgstr "選擇全域性%s庫表文件：" #: common/dialogs/dialog_global_lib_table_config_base.cpp:21 #: common/dialogs/dialog_global_lib_table_config_base.cpp:28 #: common/dialogs/dialog_global_lib_table_config_base.cpp:30 #: common/dialogs/dialog_global_lib_table_config_base.cpp:34 #: common/dialogs/dialog_global_lib_table_config_base.cpp:35 #: common/dialogs/dialog_global_lib_table_config_base.cpp:39 #: common/dialogs/dialog_global_lib_table_config_base.cpp:40 #: common/dialogs/dialog_global_lib_table_config_base.cpp:47 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:140 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:152 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:164 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:176 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:238 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:250 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:262 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:274 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:241 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:256 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:271 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:379 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:383 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:387 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:391 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:395 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:399 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:403 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:407 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:411 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:415 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:419 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:423 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:427 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:431 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:435 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:439 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:230 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:242 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:254 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:268 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:282 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:294 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:310 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:324 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:340 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:196 msgid "dummy" msgstr "假" #: common/dialogs/dialog_global_lib_table_config_base.cpp:51 msgid "Select a file" msgstr "選擇檔案" #: common/dialogs/dialog_global_lib_table_config_base.h:54 msgid "Configure Global Library Table" msgstr "配置全域性庫表" #: common/dialogs/dialog_grid_settings_base.cpp:26 common/tool/actions.cpp:480 msgid "Grid Origin" msgstr "網格原點" #: common/dialogs/dialog_grid_settings_base.cpp:63 #: common/dialogs/dialog_grid_settings_base.cpp:78 #: eeschema/dialogs/dialog_erc_base.cpp:67 #: eeschema/dialogs/dialog_erc_base.cpp:107 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:180 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:246 #: eeschema/dialogs/panel_setup_buses_base.cpp:150 #: eeschema/dialogs/panel_setup_buses_base.cpp:154 #: pcbnew/dialogs/dialog_drc_base.cpp:85 pcbnew/dialogs/dialog_drc_base.cpp:157 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:107 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:139 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:176 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:232 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:307 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:674 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:694 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:874 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:886 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:898 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:907 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:919 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:931 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:943 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:955 #: pcbnew/dialogs/panel_display_options_base.cpp:28 #: pcbnew/dialogs/panel_display_options_base.cpp:139 #: pcbnew/dialogs/panel_edit_options_base.cpp:276 #: pcbnew/dialogs/panel_edit_options_base.cpp:413 msgid "a page" msgstr "圖框" #: common/dialogs/dialog_grid_settings_base.cpp:67 msgid "Current Grid" msgstr "當前網格" #: common/dialogs/dialog_grid_settings_base.cpp:83 msgid "User Defined Grid" msgstr "使用自定義網格" #: common/dialogs/dialog_grid_settings_base.cpp:91 msgid "Size X:" msgstr "X 尺寸：" #: common/dialogs/dialog_grid_settings_base.cpp:102 msgid "Size Y:" msgstr "Y 尺寸：" #: common/dialogs/dialog_grid_settings_base.cpp:123 msgid "Fast Switching" msgstr "快速切換" #: common/dialogs/dialog_grid_settings_base.cpp:131 msgid "Grid 1:" msgstr "網格 1：" #: common/dialogs/dialog_grid_settings_base.cpp:142 #: common/dialogs/dialog_grid_settings_base.cpp:157 msgid "(hotkey)" msgstr "(快捷鍵)" #: common/dialogs/dialog_grid_settings_base.cpp:146 msgid "Grid 2:" msgstr "網格 2：" #: common/dialogs/dialog_grid_settings_base.cpp:170 common/tool/actions.cpp:486 msgid "Reset Grid Origin" msgstr "復位網格原點" #: common/dialogs/dialog_grid_settings_base.cpp:173 msgid "Reset Grid Sizes" msgstr "重置網格尺寸" #: common/dialogs/dialog_grid_settings_base.cpp:175 msgid "Resets the list of grid sizes to default values" msgstr "重置網格列表尺寸到預設值" #: common/dialogs/dialog_grid_settings_base.h:78 msgid "Grid Settings" msgstr "網格設定" #: common/dialogs/dialog_hotkey_list.cpp:33 msgid "Hotkey List" msgstr "快捷鍵列表" #: common/dialogs/dialog_locked_items_query.cpp:35 msgid "Skip Locked Items" msgstr "跳過鎖定項" #: common/dialogs/dialog_locked_items_query.cpp:36 msgid "" "Remove locked items from the selection and only apply the operation to the " "unlocked items (if any)." msgstr "從選擇中移除鎖定的專案，並只對未鎖定專案(如果有的話)進行操作。" #: common/dialogs/dialog_locked_items_query_base.cpp:30 #, c-format msgid "The selection contains %d locked items." msgstr "選中部分含 %d 個鎖定專案。" #: common/dialogs/dialog_locked_items_query_base.cpp:34 msgid "These items will be skipped unless you override the locks." msgstr "除非您覆蓋鎖定，否則跳過這些專案。" #: common/dialogs/dialog_locked_items_query_base.cpp:44 msgid "Remember decision for this session." msgstr "記住本會話的決定。" #: common/dialogs/dialog_locked_items_query_base.cpp:45 msgid "" "Remember the option selected for the remainder of this session.\n" "This dialog will not be shown again until KiCad is restarted." msgstr "" "記住為本會話剩餘部分所選擇的選項。\n" "在 KiCad 重新啟動之前，這個對話方塊不會再次顯示。" #: common/dialogs/dialog_locked_items_query_base.cpp:55 msgid "Override Locks" msgstr "覆蓋鎖定" #: common/dialogs/dialog_locked_items_query_base.cpp:56 msgid "" "Override locks and apply the operation on all the items selected.\n" "Any locked items will remain locked after the operation is complete." msgstr "" "無視鎖定並對選定的所有項應用操作。\n" "任何鎖定的專案將在操作完成後保持鎖定。" #: common/dialogs/dialog_locked_items_query_base.h:56 msgid "Locked Items" msgstr "鎖定項" #: common/dialogs/dialog_migrate_settings.cpp:32 msgid "Quit KiCad" msgstr "退出 KiCad" #: common/dialogs/dialog_migrate_settings.cpp:57 #: common/dialogs/dialog_migrate_settings_base.cpp:23 #, c-format msgid "Welcome to KiCad %s!" msgstr "歡迎來到 KiCad %s！" #: common/dialogs/dialog_migrate_settings.cpp:66 msgid "Import settings from a previous version (none found)" msgstr "從早期版本匯入設定（未找到）" #: common/dialogs/dialog_migrate_settings.cpp:137 msgid "Select Settings Path" msgstr "選擇設定路徑" #: common/dialogs/dialog_migrate_settings_base.cpp:32 msgid "How would you like to configure KiCad?" msgstr "您想如何配置 KiCad？" #: common/dialogs/dialog_migrate_settings_base.cpp:36 msgid "Import settings from a previous version at:" msgstr "在以下位置從先前版本匯入設定：" #: common/dialogs/dialog_migrate_settings_base.cpp:51 msgid "Choose a different path" msgstr "選擇一個不同的路徑" #: common/dialogs/dialog_migrate_settings_base.cpp:58 msgid "The selected path does not contain valid KiCad settings!" msgstr "所選路徑不包含有效的 KiCad 設定！" #: common/dialogs/dialog_migrate_settings_base.cpp:65 msgid "Import library configuration from previous version" msgstr "從先前版本匯入庫配置" #: common/dialogs/dialog_migrate_settings_base.cpp:67 msgid "" "When checked, the symbol and footprint library tables from the previous " "version will be imported into this version" msgstr "選中後，以前版本的符號和封裝庫表將匯入到該版本中" #: common/dialogs/dialog_migrate_settings_base.cpp:71 msgid "Start with default settings" msgstr "以預設設定啟動" #: common/dialogs/dialog_migrate_settings_base.h:67 msgid "Configure KiCad Settings Path" msgstr "配置 KiCad 設定路徑" #: common/dialogs/dialog_page_settings.cpp:58 msgid "A5 148x210mm" msgstr "A5 148x210mm" #: common/dialogs/dialog_page_settings.cpp:59 msgid "A4 210x297mm" msgstr "A4 210x297mm" #: common/dialogs/dialog_page_settings.cpp:60 msgid "A3 297x420mm" msgstr "A3 297x420mm" #: common/dialogs/dialog_page_settings.cpp:61 msgid "A2 420x594mm" msgstr "A2 420x594mm" #: common/dialogs/dialog_page_settings.cpp:62 msgid "A1 594x841mm" msgstr "A1 594x841mm" #: common/dialogs/dialog_page_settings.cpp:63 msgid "A0 841x1189mm" msgstr "A0 841x1189mm" #: common/dialogs/dialog_page_settings.cpp:64 msgid "A 8.5x11in" msgstr "A 8.5x11in" #: common/dialogs/dialog_page_settings.cpp:65 msgid "B 11x17in" msgstr "B 11x17in" #: common/dialogs/dialog_page_settings.cpp:66 msgid "C 17x22in" msgstr "C 17x22in" #: common/dialogs/dialog_page_settings.cpp:67 msgid "D 22x34in" msgstr "D 22x34in" #: common/dialogs/dialog_page_settings.cpp:68 msgid "E 34x44in" msgstr "E 34x44in" #: common/dialogs/dialog_page_settings.cpp:69 msgid "USLetter 8.5x11in" msgstr "美式信封 8.5x11in" #: common/dialogs/dialog_page_settings.cpp:70 msgid "USLegal 8.5x14in" msgstr "美式法律專用紙 8.5x14in" #: common/dialogs/dialog_page_settings.cpp:71 msgid "USLedger 11x17in" msgstr "美式法律專用紙 11x17in" #: common/dialogs/dialog_page_settings.cpp:72 msgid "User (Custom)" msgstr "使用者設定（自定義）" #: common/dialogs/dialog_page_settings.cpp:104 msgid "Preview Settings" msgstr "預覽設定" #: common/dialogs/dialog_page_settings.cpp:105 msgid "Preview Paper" msgstr "預覽圖框" #: common/dialogs/dialog_page_settings.cpp:106 msgid "Preview Title Block Data" msgstr "預覽標題塊資料" #: common/dialogs/dialog_page_settings.cpp:110 #: common/dialogs/dialog_page_settings_base.h:146 msgid "Page Settings" msgstr "圖框設定" #: common/dialogs/dialog_page_settings.cpp:111 #: common/dialogs/dialog_page_settings_base.cpp:27 msgid "Paper" msgstr "圖框" #: common/dialogs/dialog_page_settings.cpp:112 msgid "Title Block" msgstr "工程圖明細表" #: common/dialogs/dialog_page_settings.cpp:473 #, c-format msgid "Drawing sheet file '%s' not found." msgstr "未找到圖紙檔案 \"%s\"。" #: common/dialogs/dialog_page_settings.cpp:707 #: common/dialogs/dialog_page_settings_base.cpp:51 msgid "Portrait" msgstr "縱向" #: common/dialogs/dialog_page_settings.cpp:709 #: common/dialogs/dialog_page_settings_base.cpp:51 msgid "Landscape" msgstr "橫向" #: common/dialogs/dialog_page_settings.cpp:795 msgid "Select Drawing Sheet File" msgstr "選擇圖紙檔案" #: common/dialogs/dialog_page_settings_base.cpp:38 msgid "dummy text" msgstr "虛擬文字" #: common/dialogs/dialog_page_settings_base.cpp:47 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:220 #: eeschema/dialogs/dialog_label_properties.cpp:172 #: eeschema/dialogs/dialog_pin_properties_base.cpp:113 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:296 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:338 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:137 #: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:138 #: pcbnew/dialogs/dialog_text_properties_base.cpp:235 #: pcbnew/dialogs/dialog_textbox_properties_base.cpp:180 msgid "Orientation:" msgstr "方向：" #: common/dialogs/dialog_page_settings_base.cpp:57 msgid "Custom paper size:" msgstr "自定義圖框尺寸：" #: common/dialogs/dialog_page_settings_base.cpp:69 #: pcbnew/dialogs/dialog_board_statistics.cpp:105 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:299 #: pcbnew/dialogs/dialog_text_properties_base.cpp:183 msgid "Height:" msgstr "高度：" #: common/dialogs/dialog_page_settings_base.cpp:82 msgid "Custom paper height." msgstr "自定義圖框高度。" #: common/dialogs/dialog_page_settings_base.cpp:86 #: common/dialogs/dialog_page_settings_base.cpp:107 #: common/dialogs/dialog_unit_entry_base.cpp:34 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:207 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:333 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:381 #: eeschema/dialogs/dialog_line_properties_base.cpp:39 #: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:39 #: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:80 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:279 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:295 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:308 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:321 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:334 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:394 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:408 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:423 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:122 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:133 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:282 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:295 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:311 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:253 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:266 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:282 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:145 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:198 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:215 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:233 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:40 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:51 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:66 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:77 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:92 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:103 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:118 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:129 #: pcbnew/dialogs/dialog_graphic_item_properties_base.cpp:168 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:41 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:52 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:67 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:78 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:93 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:104 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:119 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:130 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:144 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:167 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:226 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:237 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:399 #: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:87 #: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:116 #: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:127 #: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:140 #: pcbnew/dialogs/dialog_target_properties_base.cpp:35 #: pcbnew/dialogs/dialog_target_properties_base.cpp:46 #: pcbnew/dialogs/dialog_text_properties_base.cpp:179 #: pcbnew/dialogs/dialog_text_properties_base.cpp:192 #: pcbnew/dialogs/dialog_text_properties_base.cpp:205 #: pcbnew/dialogs/dialog_text_properties_base.cpp:218 #: pcbnew/dialogs/dialog_text_properties_base.cpp:231 #: pcbnew/dialogs/dialog_textbox_properties_base.cpp:147 #: pcbnew/dialogs/dialog_textbox_properties_base.cpp:163 #: pcbnew/dialogs/dialog_textbox_properties_base.cpp:176 #: pcbnew/dialogs/dialog_textbox_properties_base.cpp:200 #: pcbnew/dialogs/dialog_track_via_size_base.cpp:32 #: pcbnew/dialogs/dialog_track_via_size_base.cpp:43 #: pcbnew/dialogs/dialog_track_via_size_base.cpp:54 #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:148 #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:164 msgid "unit" msgstr "單位" #: common/dialogs/dialog_page_settings_base.cpp:90 #: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:43 #: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:210 #: eeschema/dialogs/dialog_line_properties_base.cpp:30 #: eeschema/dialogs/dialog_shape_properties_base.cpp:42 #: eeschema/dialogs/dialog_text_properties_base.cpp:217 #: pcbnew/dialogs/dialog_board_statistics.cpp:103 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:270 #: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:25 #: pcbnew/dialogs/dialog_text_properties_base.cpp:170 msgid "Width:" msgstr "寬度：" #: common/dialogs/dialog_page_settings_base.cpp:103 msgid "Custom paper width." msgstr "自定義圖框寬度。" #: common/dialogs/dialog_page_settings_base.cpp:114 #: common/dialogs/dialog_page_settings_base.cpp:225 #: common/dialogs/dialog_page_settings_base.cpp:237 #: common/dialogs/dialog_page_settings_base.cpp:249 #: common/dialogs/dialog_page_settings_base.cpp:261 #: common/dialogs/dialog_page_settings_base.cpp:273 #: common/dialogs/dialog_page_settings_base.cpp:285 #: common/dialogs/dialog_page_settings_base.cpp:297 #: common/dialogs/dialog_page_settings_base.cpp:309 #: common/dialogs/dialog_page_settings_base.cpp:321 #: common/dialogs/dialog_page_settings_base.cpp:333 #: common/dialogs/dialog_page_settings_base.cpp:345 #: common/dialogs/dialog_page_settings_base.cpp:357 #: common/dialogs/dialog_page_settings_base.cpp:369 msgid "Export to other sheets" msgstr "匯出到其他圖框" #: common/dialogs/dialog_page_settings_base.cpp:142 common/rc_item.cpp:371 #: eeschema/erc_item.cpp:326 #: gerbview/dialogs/panel_gerbview_color_settings.cpp:104 #: gerbview/widgets/gerbview_layer_widget.cpp:137 pcbnew/pcb_marker.cpp:213 #: pcbnew/widgets/appearance_controls.cpp:353 msgid "Drawing Sheet" msgstr "圖紙" #: common/dialogs/dialog_page_settings_base.cpp:155 #: eeschema/dialogs/dialog_sim_model_base.cpp:38 eeschema/sch_field.cpp:237 #: pcbnew/dialogs/dialog_export_step_base.cpp:22 #: pcbnew/import_gfx/dialog_import_gfx_base.cpp:25 msgid "File:" msgstr "檔案：" #: common/dialogs/dialog_page_settings_base.cpp:174 msgid "Title Block Parameters" msgstr "標題欄引數" #: common/dialogs/dialog_page_settings_base.cpp:184 #, c-format msgid "Number of sheets: %d" msgstr "共 %d 頁" #: common/dialogs/dialog_page_settings_base.cpp:191 #, c-format msgid "Sheet number: %d" msgstr "第 %d 頁" #: common/dialogs/dialog_page_settings_base.cpp:204 msgid "Issue Date:" msgstr "發行日期：" #: common/dialogs/dialog_page_settings_base.cpp:216 msgid "<<<" msgstr "<<<" #: common/dialogs/dialog_page_settings_base.cpp:228 msgid "Revision:" msgstr "修訂：" #: common/dialogs/dialog_page_settings_base.cpp:240 #: eeschema/dialogs/dialog_export_netlist.cpp:377 msgid "Title:" msgstr "標題：" #: common/dialogs/dialog_page_settings_base.cpp:252 msgid "Company:" msgstr "廠商：" #: common/dialogs/dialog_page_settings_base.cpp:264 msgid "Comment1:" msgstr "註釋 1：" #: common/dialogs/dialog_page_settings_base.cpp:276 msgid "Comment2:" msgstr "註釋 2：" #: common/dialogs/dialog_page_settings_base.cpp:288 msgid "Comment3:" msgstr "註釋 3：" #: common/dialogs/dialog_page_settings_base.cpp:300 msgid "Comment4:" msgstr "註釋 4：" #: common/dialogs/dialog_page_settings_base.cpp:312 msgid "Comment5:" msgstr "註釋 5：" #: common/dialogs/dialog_page_settings_base.cpp:324 msgid "Comment6:" msgstr "註釋 6：" #: common/dialogs/dialog_page_settings_base.cpp:336 msgid "Comment7:" msgstr "註釋 7：" #: common/dialogs/dialog_page_settings_base.cpp:348 msgid "Comment8:" msgstr "註釋 8：" #: common/dialogs/dialog_page_settings_base.cpp:360 msgid "Comment9:" msgstr "註釋 9：" #: common/dialogs/dialog_paste_special.cpp:37 msgid "" "Finds the next available reference designator for any designators that " "already exist in the design." msgstr "為設計中已經存在的任何位號查詢下一個可用的位號。" #: common/dialogs/dialog_paste_special.cpp:44 #, c-format msgid "Replaces reference designators with '%s'." msgstr "用 '%s' 替換位號。" #: common/dialogs/dialog_paste_special_base.cpp:22 msgid "Assign unique reference designators to pasted symbols" msgstr "為所貼上的符號分配唯一的位號" #: common/dialogs/dialog_paste_special_base.cpp:22 msgid "Keep existing reference designators, even if they are duplicated" msgstr "保留現有的位號，即使它們是重複的" #: common/dialogs/dialog_paste_special_base.cpp:22 msgid "Clear reference designators on all pasted symbols" msgstr "清理所有貼上符號上的位號" #: common/dialogs/dialog_paste_special_base.cpp:24 msgid "Paste Options" msgstr "貼上選項" #: common/dialogs/dialog_paste_special_base.h:46 msgid "Paste Special" msgstr "特殊貼上" #: common/dialogs/dialog_print_generic.cpp:95 #: common/dialogs/dialog_print_generic.cpp:301 #: common/dialogs/dialog_print_generic_base.h:77 common/tool/actions.cpp:102 #: eeschema/dialogs/dialog_print_using_printer.cpp:144 #: eeschema/dialogs/dialog_print_using_printer_base.h:61 msgid "Print" msgstr "列印" #: common/dialogs/dialog_print_generic.cpp:96 #: common/dialogs/dialog_print_generic.cpp:247 #: eeschema/dialogs/dialog_print_using_printer.cpp:145 msgid "Print Preview" msgstr "列印預覽" #: common/dialogs/dialog_print_generic.cpp:97 common/hotkey_store.cpp:55 #: common/tool/action_menu.cpp:207 common/tool/action_menu.cpp:212 #: eeschema/dialogs/dialog_annotate.cpp:94 eeschema/dialogs/dialog_bom.cpp:136 #: eeschema/dialogs/dialog_change_symbols.cpp:155 #: eeschema/dialogs/dialog_erc.cpp:100 eeschema/dialogs/dialog_erc.cpp:430 #: eeschema/dialogs/dialog_export_netlist.cpp:261 #: eeschema/dialogs/dialog_ibis_parser_reporter.cpp:36 #: eeschema/dialogs/dialog_plot_schematic.cpp:76 #: eeschema/dialogs/dialog_print_using_printer.cpp:146 #: eeschema/dialogs/dialog_schematic_find_base.cpp:133 #: eeschema/dialogs/dialog_symbol_remap_base.cpp:33 #: eeschema/dialogs/dialog_update_from_pcb.cpp:66 #: kicad/pcm/dialogs/dialog_pcm.cpp:159 #: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:72 #: pcbnew/dialogs/dialog_board_reannotate.cpp:112 #: pcbnew/dialogs/dialog_board_statistics.cpp:136 #: pcbnew/dialogs/dialog_drc.cpp:126 pcbnew/dialogs/dialog_drc.cpp:318 #: pcbnew/dialogs/dialog_exchange_footprints.cpp:160 #: pcbnew/dialogs/dialog_export_step.cpp:123 #: pcbnew/dialogs/dialog_export_svg.cpp:94 #: pcbnew/dialogs/dialog_find_base.cpp:102 #: pcbnew/dialogs/dialog_footprint_checker.cpp:62 #: pcbnew/dialogs/dialog_gen_footprint_position.cpp:65 #: pcbnew/dialogs/dialog_gendrill.cpp:78 #: pcbnew/dialogs/dialog_import_netlist.cpp:82 #: pcbnew/dialogs/dialog_plot.cpp:181 pcbnew/dialogs/dialog_update_pcb.cpp:60 msgid "Close" msgstr "關閉" #: common/dialogs/dialog_print_generic.cpp:155 msgid "Warning: Bad scale number" msgstr "警告：縮放比例錯誤" #: common/dialogs/dialog_print_generic.cpp:164 #, c-format msgid "" "Warning: Scale option set to a very large value.\n" " Clamped to %f" msgstr "" "警告：縮放比例被設定為非常大的值。\n" " 已限制到 %f" #: common/dialogs/dialog_print_generic.cpp:172 #, c-format msgid "" "Warning: Scale option set to a very small value.\n" " Clamped to %f" msgstr "" "警告：縮放比例被設定為一個很小的值。\n" " 已限制到 %f" #: common/dialogs/dialog_print_generic.cpp:242 #: common/dialogs/dialog_print_generic.cpp:293 msgid "Nothing to print" msgstr "沒有要列印的內容" #: common/dialogs/dialog_print_generic.cpp:284 #: eeschema/dialogs/dialog_print_using_printer.cpp:319 msgid "Previous print job not yet complete." msgstr "上一個列印作業尚未完成。" #: common/dialogs/dialog_print_generic.cpp:309 msgid "There was a problem printing." msgstr "打印發生問題。" #: common/dialogs/dialog_print_generic.cpp:351 msgid "An error occurred initializing the printer information." msgstr "初始化印表機資訊時發生錯誤。" #: common/dialogs/dialog_print_generic_base.cpp:31 #: eeschema/dialogs/dialog_plot_schematic_base.cpp:73 #: eeschema/dialogs/dialog_print_using_printer_base.cpp:31 #: pcbnew/dialogs/dialog_plot_base.cpp:386 #: pcbnew/dialogs/dialog_plot_base.cpp:409 msgid "Output mode:" msgstr "輸出模式：" #: common/dialogs/dialog_print_generic_base.cpp:35 #: common/dialogs/panel_setup_netclasses_base.cpp:62 #: eeschema/dialogs/dialog_label_properties_base.cpp:100 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:72 #: eeschema/dialogs/dialog_plot_schematic_base.cpp:77 #: eeschema/dialogs/dialog_print_using_printer_base.cpp:35 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:72 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:69 #: eeschema/fields_grid_table.cpp:351 eeschema/sim/sim_plot_frame.cpp:495 #: eeschema/sim/sim_plot_frame_base.cpp:120 #: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:98 #: pcbnew/dialogs/dialog_export_svg_base.cpp:81 #: pcbnew/dialogs/dialog_plot_base.cpp:380 #: pcbnew/dialogs/dialog_plot_base.cpp:403 #: pcbnew/tools/drawing_stackup_table_tool.cpp:269 msgid "Color" msgstr "顏色" #: common/dialogs/dialog_print_generic_base.cpp:35 #: pcbnew/dialogs/dialog_export_svg_base.cpp:81 #: pcbnew/dialogs/dialog_plot_base.cpp:380 #: pcbnew/dialogs/dialog_plot_base.cpp:403 msgid "Black and white" msgstr "黑白" #: common/dialogs/dialog_print_generic_base.cpp:41 #: eeschema/dialogs/dialog_print_using_printer_base.cpp:22 msgid "Print drawing sheet" msgstr "列印圖紙" #: common/dialogs/dialog_print_generic_base.cpp:43 msgid "Print Frame references." msgstr "列印圖框參考。" #: common/dialogs/dialog_print_generic_base.cpp:58 #: pcbnew/dialogs/dialog_plot_base.cpp:122 msgid "1:1" msgstr "1:1" #: common/dialogs/dialog_print_generic_base.cpp:64 msgid "Fit to page" msgstr "適合頁面" #: common/dialogs/dialog_print_generic_base.cpp:73 msgid "Custom:" msgstr "自定義：" #: common/dialogs/dialog_print_generic_base.cpp:77 msgid "Set X scale adjust for exact scale plotting" msgstr "設定 X 方向調整比例使輸出更精確" #: common/dialogs/dialog_print_generic_base.cpp:96 msgid "Info text" msgstr "訊息文字" #: common/dialogs/dialog_print_generic_base.cpp:108 #: eeschema/dialogs/dialog_print_using_printer_base.cpp:73 msgid "Page Setup..." msgstr "頁面設定..." #: common/dialogs/dialog_text_entry_base.cpp:21 #: common/dialogs/dialog_text_entry_base.cpp:33 #: common/dialogs/dialog_unit_entry_base.cpp:22 #: pcbnew/dialogs/dialog_pad_primitives_properties_base.cpp:429 msgid "MyLabel" msgstr "我的標籤" #: common/dialogs/eda_list_dialog.cpp:47 common/widgets/lib_tree.cpp:154 #: eeschema/dialogs/dialog_symbol_fields_table.cpp:789 #: eeschema/sim/sim_plot_frame.cpp:352 eeschema/sim/sim_plot_frame.cpp:491 #: eeschema/symbol_viewer_frame.cpp:167 eeschema/symbol_viewer_frame.cpp:182 #: kicad/pcm/dialogs/panel_packages_view.cpp:77 #: pcbnew/dialogs/dialog_copper_zones.cpp:252 #: pcbnew/footprint_viewer_frame.cpp:152 pcbnew/footprint_viewer_frame.cpp:167 msgid "Filter" msgstr "篩選" #: common/dialogs/eda_list_dialog_base.cpp:22 msgid "Items:" msgstr "專案：" #: common/dialogs/eda_reorderable_list_dialog_base.cpp:25 msgid "Available:" msgstr "可用：" #: common/dialogs/eda_reorderable_list_dialog_base.cpp:40 msgid ">>" msgstr ">>" #: common/dialogs/eda_reorderable_list_dialog_base.cpp:43 #: pcbnew/dialogs/dialog_imported_layers_base.cpp:69 msgid "<<" msgstr "<<" #: common/dialogs/eda_reorderable_list_dialog_base.cpp:52 msgid "Enabled:" msgstr "已啟用：" #: common/dialogs/eda_reorderable_list_dialog_base.cpp:65 #: eeschema/dialogs/dialog_label_properties_base.cpp:126 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:97 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:98 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:95 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:139 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:136 msgid "Move up" msgstr "上移" #: common/dialogs/eda_reorderable_list_dialog_base.cpp:70 #: eeschema/dialogs/dialog_label_properties_base.cpp:131 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:102 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:103 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:100 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:144 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:141 msgid "Move down" msgstr "下移" #: common/dialogs/eda_view_switcher_base.cpp:19 #: common/dialogs/eda_view_switcher_base.h:40 msgid "View Preset Switcher" msgstr "檢視預設切換器" #: common/dialogs/panel_color_settings.cpp:51 msgid "Reveal Themes in Finder" msgstr "在“訪達”中顯示主題檔案" #: common/dialogs/panel_color_settings.cpp:133 msgid "New theme name:" msgstr "新主題名稱：" #: common/dialogs/panel_color_settings.cpp:133 msgid "Add Color Theme" msgstr "新增配色主題" #: common/dialogs/panel_color_settings.cpp:145 msgid "Theme already exists!" msgstr "主題已存在！" #: common/dialogs/panel_color_settings.cpp:213 #: common/dialogs/panel_color_settings.cpp:235 msgid "New Theme..." msgstr "新主題..." #: common/dialogs/panel_color_settings.cpp:223 msgid "(read-only)" msgstr "(只讀)" #: common/dialogs/panel_color_settings.cpp:292 msgid "Copy color" msgstr "複製顏色" #: common/dialogs/panel_color_settings.cpp:295 msgid "Paste color" msgstr "貼上顏色" #: common/dialogs/panel_color_settings.cpp:298 msgid "Revert to saved color" msgstr "恢復為已儲存的顏色" #: common/dialogs/panel_color_settings_base.cpp:21 msgid "Theme:" msgstr "主題：" #: common/dialogs/panel_color_settings_base.cpp:35 msgid "Override individual item colors" msgstr "覆蓋單個專案的顏色" #: common/dialogs/panel_color_settings_base.cpp:36 msgid "" "Show all items in their default color even if they have specific colors set " "in their properties." msgstr "即使屬性中設定了特定的顏色，也以其預設顏色顯示所有專案。" #: common/dialogs/panel_color_settings_base.cpp:43 msgid "Open Theme Folder" msgstr "開啟主題資料夾" #: common/dialogs/panel_color_settings_base.cpp:44 msgid "Open the folder containing color themes" msgstr "開啟包含配色主題的資料夾" #: common/dialogs/panel_common_settings.cpp:86 msgid "Icon scale:" msgstr "圖示縮放：" #: common/dialogs/panel_common_settings.cpp:96 #: common/dialogs/panel_common_settings_base.cpp:177 #: common/dialogs/panel_common_settings_base.cpp:198 #: common/dialogs/panel_mouse_settings_base.cpp:66 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122 #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:91 msgid "Automatic" msgstr "自動" #: common/dialogs/panel_common_settings.cpp:116 msgid "" "Set the scale for the canvas.\n" "\n" "On high-DPI displays on some platforms, KiCad cannot determine the scaling " "factor. In this case you may need to set this to a value to match your " "system's DPI scaling. 2.0 is a common value. \n" "\n" "If this does not match the system DPI scaling, the canvas will not match the " "window size and cursor position." msgstr "" "設定畫布的縮放比例。\n" "\n" "在某些平臺的高 DPI 顯示器上，KiCad 無法確定縮放倍數。\n" "在這種情況下，你可能需要將其設定為一個匹配系統 DPI 縮放的數值。2.0 是一個常見" "的值。\n" "如果這與系統 DPI 縮放不匹配，則畫布將與視窗大小和游標位置不匹配。" #: common/dialogs/panel_common_settings.cpp:126 msgid "" "Use an automatic value for the canvas scale.\n" "\n" "On some platforms, the automatic value is incorrect and should be set " "manually." msgstr "" "自動確定畫布縮放比例。\n" "\n" "在某些平臺上，自動值不正確，應手動設定。" #: common/dialogs/panel_common_settings.cpp:478 msgid "Executable files (" msgstr "可執行檔案 (" #: common/dialogs/panel_common_settings.cpp:483 msgid "Select Preferred PDF Viewer" msgstr "選擇首選 PDF 瀏覽器" #: common/dialogs/panel_common_settings_base.cpp:22 msgid "Antialiasing" msgstr "抗鋸齒" #: common/dialogs/panel_common_settings_base.cpp:39 msgid "Accelerated graphics:" msgstr "硬體加速圖形：" #: common/dialogs/panel_common_settings_base.cpp:43 #: common/dialogs/panel_common_settings_base.cpp:53 msgid "No Antialiasing" msgstr "無抗鋸齒" #: common/dialogs/panel_common_settings_base.cpp:43 #: common/dialogs/panel_common_settings_base.cpp:53 msgid "Fast Antialiasing" msgstr "快速抗鋸齒" #: common/dialogs/panel_common_settings_base.cpp:43 #: common/dialogs/panel_common_settings_base.cpp:53 msgid "High Quality Antialiasing" msgstr "高品質抗鋸齒" #: common/dialogs/panel_common_settings_base.cpp:49 msgid "Fallback graphics:" msgstr "軟體加速圖形：" #: common/dialogs/panel_common_settings_base.cpp:70 msgid "Helper Applications" msgstr "輔助應用" #: common/dialogs/panel_common_settings_base.cpp:84 msgid "Text editor:" msgstr "文字編輯器：" #: common/dialogs/panel_common_settings_base.cpp:103 msgid "System default PDF viewer" msgstr "系統預設 PDF 瀏覽器" #: common/dialogs/panel_common_settings_base.cpp:112 msgid "Other:" msgstr "其它：" #: common/dialogs/panel_common_settings_base.cpp:130 msgid "User Interface" msgstr "使用者介面" #: common/dialogs/panel_common_settings_base.cpp:143 msgid "Show icons in menus" msgstr "在選單中顯示圖示" #: common/dialogs/panel_common_settings_base.cpp:146 msgid "Show scrollbars in editors" msgstr "在編輯器中顯示捲軸" #: common/dialogs/panel_common_settings_base.cpp:148 msgid "This change takes effect when relaunching the editor." msgstr "該更改在重新啟動編輯器時生效。" #: common/dialogs/panel_common_settings_base.cpp:152 msgid "Focus follows mouse between schematic and PCB editors" msgstr "焦點在原理圖和 PCB 編輯器之間跟蹤滑鼠" #: common/dialogs/panel_common_settings_base.cpp:153 msgid "" "If the mouse cursor is moved over the canvas of a schematic or PCB editor " "window, that window is raised." msgstr "如果將滑鼠游標移到原理圖或 PCB 編輯器視窗的畫布上，則該視窗會出現。" #: common/dialogs/panel_common_settings_base.cpp:163 msgid "Icon theme:" msgstr "圖示主題：" #: common/dialogs/panel_common_settings_base.cpp:167 msgid "Light" msgstr "淺色" #: common/dialogs/panel_common_settings_base.cpp:168 msgid "Use icons designed for light window backgrounds" msgstr "使用專為淺色窗戶背景設計的圖示" #: common/dialogs/panel_common_settings_base.cpp:172 #: gerbview/gerber_draw_item.cpp:677 msgid "Dark" msgstr "黑" #: common/dialogs/panel_common_settings_base.cpp:173 msgid "Use icons designed for dark window backgrounds" msgstr "使用專為深色窗戶背景設計的圖示" #: common/dialogs/panel_common_settings_base.cpp:179 msgid "" "Automatically choose light or dark icons based on the system color theme" msgstr "根據系統配色主題自動選擇淺色或深色圖示" #: common/dialogs/panel_common_settings_base.cpp:190 msgid "Canvas scale:" msgstr "畫布縮放：" #: common/dialogs/panel_common_settings_base.cpp:207 msgid "Apply icon scaling to fonts" msgstr "將圖示縮放應用到字型" #: common/dialogs/panel_common_settings_base.cpp:210 msgid "(This workaround will improve some GTK HiDPI font scaling issues.)" msgstr "(這個臨時解決方案將改善一些 GTK HiDPI 字型縮放問題。)" #: common/dialogs/panel_common_settings_base.cpp:217 msgid "High-contrast mode dimming factor:" msgstr "高對比度模式的調光係數：" #: common/dialogs/panel_common_settings_base.cpp:224 #: eeschema/dialogs/panel_setup_formatting_base.cpp:77 #: eeschema/dialogs/panel_setup_formatting_base.cpp:92 #: pcb_calculator/calculator_panels/panel_eseries_base.cpp:118 #: pcb_calculator/calculator_panels/panel_eseries_base.cpp:138 #: pcb_calculator/calculator_panels/panel_eseries_base.cpp:158 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:324 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:295 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:155 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:196 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:252 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:296 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:649 #: pcbnew/dialogs/dialog_pns_length_tuning_settings_base.cpp:173 #: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:127 #: pcbnew/teardrop/dialog_teardrop_base.cpp:56 #: pcbnew/teardrop/dialog_teardrop_base.cpp:68 #: pcbnew/teardrop/dialog_teardrop_base.cpp:113 #: pcbnew/teardrop/dialog_teardrop_base.cpp:160 #: pcbnew/teardrop/dialog_teardrop_base.cpp:172 #: pcbnew/teardrop/dialog_teardrop_base.cpp:217 #: pcbnew/teardrop/dialog_teardrop_base.cpp:264 #: pcbnew/teardrop/dialog_teardrop_base.cpp:276 #: pcbnew/teardrop/dialog_teardrop_base.cpp:321 msgid "%" msgstr "%" #: common/dialogs/panel_common_settings_base.cpp:240 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:20 msgid "Editing" msgstr "編輯" #: common/dialogs/panel_common_settings_base.cpp:250 msgid "Warp mouse to origin of moved object" msgstr "將滑鼠移動到被移動的物件的原點" #: common/dialogs/panel_common_settings_base.cpp:254 msgid "First hotkey selects tool" msgstr "首次按下快捷鍵僅選擇對應工具" #: common/dialogs/panel_common_settings_base.cpp:255 msgid "" "If not checked, hotkeys will immediately perform an action even if the " "relevant tool was not previously selected." msgstr "" "如果未選中，即使未選擇快捷鍵對應的工具，按下快捷鍵也將立即執行對應的操作。" #: common/dialogs/panel_common_settings_base.cpp:265 msgid "Session" msgstr "會話" #: common/dialogs/panel_common_settings_base.cpp:275 msgid "Remember open files for next project launch" msgstr "啟動時開啟的上一次的工程" #: common/dialogs/panel_common_settings_base.cpp:277 msgid "" "If checked, launching a project will also launch tools such as the schematic " "and board editors with previously open files" msgstr "" "如果選中，啟動專案也會啟動工具，例如原理圖和電路板編輯器以及之前開啟的檔案" #: common/dialogs/panel_common_settings_base.cpp:290 msgid "&Auto save:" msgstr "自動儲存 (&A) :" #: common/dialogs/panel_common_settings_base.cpp:295 msgid "" "Delay after the first change to create a backup file of the board on disk.\n" "If set to 0, auto backup is disabled" msgstr "" "在第一次更改後延遲建立磁碟上的備份檔案。\n" "如果設定為 0，則禁用自動備份" #: common/dialogs/panel_common_settings_base.cpp:300 #: common/dialogs/panel_common_settings_base.cpp:387 msgid "minutes" msgstr "分鐘" #: common/dialogs/panel_common_settings_base.cpp:304 msgid "File history size:" msgstr "檔案歷史個數：" #: common/dialogs/panel_common_settings_base.cpp:311 msgid "3D cache file duration:" msgstr "3D 快取檔案持續時間：" #: common/dialogs/panel_common_settings_base.cpp:316 msgid "" "3D cache files older than this are deleted.\n" "If set to 0, cache clearing is disabled" msgstr "" "將刪除此時間以前的 3D 快取檔案。\n" "如果設定為 0，則禁用快取清除" #: common/dialogs/panel_common_settings_base.cpp:320 msgid "days" msgstr "天" #: common/dialogs/panel_common_settings_base.cpp:335 msgid "Project Backup" msgstr "工程備份" #: common/dialogs/panel_common_settings_base.cpp:350 msgid "Automatically backup projects" msgstr "自動備份工程" #: common/dialogs/panel_common_settings_base.cpp:351 msgid "" "Automatically create backup archives of the current project when saving files" msgstr "儲存檔案時自動建立當前專案的壓縮備份" #: common/dialogs/panel_common_settings_base.cpp:355 msgid "Create backups when auto save occurs" msgstr "在進行自動儲存時建立備份" #: common/dialogs/panel_common_settings_base.cpp:356 msgid "" "Create backups when the auto save feature is enabled. If not checked, " "backups will only be created when you manually save a file." msgstr "" "啟用自動儲存功能後建立備份。 如果未選中，則僅在手動儲存檔案時建立備份。" #: common/dialogs/panel_common_settings_base.cpp:360 msgid "Maximum backups to keep:" msgstr "保留的最大備份數：" #: common/dialogs/panel_common_settings_base.cpp:362 msgid "How many backup files total to keep (set to 0 for no limit)" msgstr "總共要保留多少個備份檔案(設定為 0 表示沒有限制)" #: common/dialogs/panel_common_settings_base.cpp:369 msgid "Maximum backups per day:" msgstr "每天最大備份數：" #: common/dialogs/panel_common_settings_base.cpp:371 msgid "How many backup files to keep each day (set to 0 for no limit)" msgstr "每天要保留多少個備份檔案(設定為 0 表示沒有限制)" #: common/dialogs/panel_common_settings_base.cpp:378 msgid "Minimum time between backups:" msgstr "備份之間的最短時間：" #: common/dialogs/panel_common_settings_base.cpp:380 msgid "" "Number of minutes since the last backup before another will be created the " "next time you save (set to 0 for no minimum)" msgstr "" "自上次備份後的分鐘數，下次儲存時將建立另一個備份(設定為 0 表示無最小值)" #: common/dialogs/panel_common_settings_base.cpp:391 msgid "Maximum total backup size:" msgstr "最大總備份大小：" #: common/dialogs/panel_common_settings_base.cpp:393 msgid "" "If the total size of backup files grows above this limit, old backups will " "be deleted (set to 0 for no limit)" msgstr "如果備份檔案的總大小超過此限制，舊備份將被刪除(設定為 0 表示沒有限制)" #: common/dialogs/panel_common_settings_base.cpp:400 msgid "MB" msgstr "MB" #: common/dialogs/panel_data_collection_base.cpp:20 msgid "" "KiCad can anonymously report crashes and special event data to developers in " "order to aid identifying critical bugs across the user base more effectively " "and help profile functionality to guide improvements.\n" "\n" "To link automatic reports from the same KiCad install, a unique identifier " "is generated that is completely random, it is only used for the purposes of " "crash reporting. No personally identifiable information (PII) including IP " "address is stored or connected to this identifier. You may reset this id at " "anytime with the button provided.\n" "\n" "If you choose to voluntarily participate, KiCad will automatically handle " "sending said reports when crashes or events occur. Your design files such as " "schematic or PCB are not shared in this process." msgstr "" "KiCad 可以匿名地向開發人員報告崩潰和特殊事件資料，以幫助更有效地識別整個使用" "者群中的關鍵 bug，並幫助繪製功能畫像來指導改進。\n" "\n" "要連結來自相同 KiCad 安裝的自動報告，將生成一個完全隨機的唯一識別符號，它僅用" "於崩潰報告的目的。沒有個人身份資訊(PII)，包括IP地址被儲存或連線到該識別符號。" "您可以在任何時候透過提供的按鈕重置此 id。\n" "\n" "如果您選擇自願參與，那麼發生崩潰或事件時，KiCad 將自動處理傳送上述報告。您的" "設計檔案，如原理圖或 PCB 在此過程中不會被共享。" #: common/dialogs/panel_data_collection_base.cpp:24 msgid "I agree to provide anonymous reports" msgstr "我同意提供匿名報告" #: common/dialogs/panel_data_collection_base.cpp:35 msgid "Reset Unique Id" msgstr "重置唯一性ID" #: common/dialogs/panel_hotkeys_editor.cpp:78 msgid "Type filter text" msgstr "輸入篩選文字" #: common/dialogs/panel_hotkeys_editor.cpp:114 msgid "Undo All Changes" msgstr "撤銷所有變更" #: common/dialogs/panel_hotkeys_editor.cpp:115 msgid "Undo all changes made so far in this dialog" msgstr "在此對話方塊中撤消到目前為止所做的所有變更" #: common/dialogs/panel_hotkeys_editor.cpp:123 msgid "Import Hotkeys..." msgstr "匯入快捷鍵..." #: common/dialogs/panel_hotkeys_editor.cpp:124 msgid "" "Import hotkey definitions from an external file, replacing the current values" msgstr "從外部檔案匯入快捷鍵定義，來替換當前值" #: common/dialogs/panel_hotkeys_editor.cpp:187 msgid "Import Hotkeys File:" msgstr "匯入快捷鍵檔案：" #: common/dialogs/panel_hotkeys_editor.cpp:235 msgid "| Action | Default Hotkey | Description" msgstr "| 操作 | 預設快捷鍵 | 描述" #: common/dialogs/panel_image_editor.cpp:71 msgid "Incorrect scale number" msgstr "錯誤的比例數值" #: common/dialogs/panel_image_editor.cpp:81 #, c-format msgid "" "This scale results in an image which is too small (%.2f mm or %.1f mil)." msgstr "此比例會使影象尺寸太小 (%.2f mm 或 %.1f mil)。" #: common/dialogs/panel_image_editor.cpp:92 #, c-format msgid "" "This scale results in an image which is very large (%.1f mm or %.2f in). Are " "you sure?" msgstr "此比例會使影象尺寸非常大(%.1f mm 或 %.2f in)。確定嗎？" #: common/dialogs/panel_image_editor_base.cpp:31 msgid "Grey" msgstr "灰度" #: common/dialogs/panel_image_editor_base.cpp:37 msgid "Image Scale:" msgstr "影象比例：" #: common/dialogs/panel_mouse_settings.cpp:47 #: pcbnew/dialogs/panel_edit_options_base.cpp:224 msgid "Cmd" msgstr "Cmd" #: common/dialogs/panel_mouse_settings.cpp:48 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:228 #: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:43 #: pcbnew/dialogs/panel_edit_options_base.cpp:235 msgid "Option" msgstr "設定" #: common/dialogs/panel_mouse_settings.cpp:85 msgid "Only one action can be assigned to each vertical scroll setting" msgstr "每個垂直滾動設定只能分配一個操作" #: common/dialogs/panel_mouse_settings_base.cpp:20 msgid "Pan and Zoom" msgstr "平移和縮放" #: common/dialogs/panel_mouse_settings_base.cpp:35 msgid "Center and warp cursor on zoom" msgstr "縮放時居中游標" #: common/dialogs/panel_mouse_settings_base.cpp:36 msgid "Center the cursor on screen when zooming." msgstr "縮放時將游標移至螢幕中心。" #: common/dialogs/panel_mouse_settings_base.cpp:43 msgid "Automatically pan while moving object" msgstr "移動物件時自動平移" #: common/dialogs/panel_mouse_settings_base.cpp:44 msgid "" "When drawing a track or moving an item, pan when approaching the edge of the " "display." msgstr "當繪製佈線或移動專案時， 在接近顯示器邊緣時平移畫布。" #: common/dialogs/panel_mouse_settings_base.cpp:48 msgid "Use zoom acceleration" msgstr "使用縮放加速" #: common/dialogs/panel_mouse_settings_base.cpp:49 msgid "Zoom faster when scrolling quickly" msgstr "快速滾動時縮放速度更快" #: common/dialogs/panel_mouse_settings_base.cpp:55 msgid "Zoom speed:" msgstr "縮放速度：" #: common/dialogs/panel_mouse_settings_base.cpp:61 msgid "How far to zoom in for each rotation of the mouse wheel" msgstr "滑鼠滾輪每次旋轉的放大程度" #: common/dialogs/panel_mouse_settings_base.cpp:68 msgid "Pick the zoom speed automatically" msgstr "自動選擇縮放速度" #: common/dialogs/panel_mouse_settings_base.cpp:77 msgid "Auto pan speed:" msgstr "自動平移速度：" #: common/dialogs/panel_mouse_settings_base.cpp:82 msgid "How fast to pan when moving an object off the edge of the screen" msgstr "將物件移出螢幕邊緣時的平移速度" #: common/dialogs/panel_mouse_settings_base.cpp:103 msgid "Drag Gestures" msgstr "拖動手勢" #: common/dialogs/panel_mouse_settings_base.cpp:122 msgid "Left button drag:" msgstr "左鍵拖動：" #: common/dialogs/panel_mouse_settings_base.cpp:126 msgid "Draw selection rectangle" msgstr "將選定敷銅繪製為矩形" #: common/dialogs/panel_mouse_settings_base.cpp:126 msgid "Drag selected objects; otherwise draw selection rectangle" msgstr "拖動選定的物件；否則繪製選擇矩形" #: common/dialogs/panel_mouse_settings_base.cpp:126 msgid "Drag any object (selected or not)" msgstr "拖動任意專案（選中或未選中）" #: common/dialogs/panel_mouse_settings_base.cpp:135 msgid "Middle button drag:" msgstr "中鍵拖動：" #: common/dialogs/panel_mouse_settings_base.cpp:139 #: common/dialogs/panel_mouse_settings_base.cpp:152 msgid "Pan" msgstr "平移" #: common/dialogs/panel_mouse_settings_base.cpp:139 #: common/dialogs/panel_mouse_settings_base.cpp:152 #: common/tool/zoom_menu.cpp:56 msgid "Zoom" msgstr "縮放" #: common/dialogs/panel_mouse_settings_base.cpp:139 #: common/dialogs/panel_mouse_settings_base.cpp:152 #: eeschema/dialogs/panel_setup_formatting_base.cpp:149 #: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44 #: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:49 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:158 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:232 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:358 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:329 #: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:91 #: pcbnew/dialogs/dialog_pad_properties.cpp:942 #: pcbnew/dialogs/dialog_pad_properties.cpp:951 #: pcbnew/dialogs/dialog_pad_properties.cpp:961 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:558 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:716 #: pcbnew/dialogs/dialog_plot_base.cpp:112 pcbnew/footprint.cpp:2887 #: pcbnew/pad.cpp:1718 pcbnew/pad.cpp:1732 #: pcbnew/widgets/appearance_controls.cpp:725 #: pcbnew/widgets/appearance_controls.cpp:767 #: pcbnew/widgets/appearance_controls.cpp:2445 #: pcbnew/widgets/appearance_controls.cpp:2464 pcbnew/zone.cpp:1381 msgid "None" msgstr "無" #: common/dialogs/panel_mouse_settings_base.cpp:148 msgid "Right button drag:" msgstr "右鍵拖動：" #: common/dialogs/panel_mouse_settings_base.cpp:170 msgid "Scroll Gestures" msgstr "滾動手勢" #: common/dialogs/panel_mouse_settings_base.cpp:186 msgid "Vertical touchpad or scroll wheel movement:" msgstr "垂直觸控板或滾動輪運動：" #: common/dialogs/panel_mouse_settings_base.cpp:191 msgid "Only one action can be assigned to each column" msgstr "每列只能分配一個操作" #: common/dialogs/panel_mouse_settings_base.cpp:208 msgid "--" msgstr "--" #: common/dialogs/panel_mouse_settings_base.cpp:212 #: pcbnew/dialogs/panel_edit_options_base.cpp:152 msgid "Ctrl" msgstr "Ctrl" #: common/dialogs/panel_mouse_settings_base.cpp:216 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:154 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:212 #: pcbnew/dialogs/panel_edit_options_base.cpp:132 #: pcbnew/dialogs/panel_edit_options_base.cpp:204 msgid "Shift" msgstr "Shift" #: common/dialogs/panel_mouse_settings_base.cpp:220 msgid "Alt" msgstr "Alt" #: common/dialogs/panel_mouse_settings_base.cpp:224 msgid "Zoom:" msgstr "縮放：" #: common/dialogs/panel_mouse_settings_base.cpp:240 msgid "Pan up/down:" msgstr "觸控板向上/向下：" #: common/dialogs/panel_mouse_settings_base.cpp:256 msgid "Pan left/right:" msgstr "觸控板向左/向右：" #: common/dialogs/panel_mouse_settings_base.cpp:290 msgid "Pan left/right with horizontal movement" msgstr "用水平移動向左/向右平移觸控板" #: common/dialogs/panel_mouse_settings_base.cpp:291 msgid "" "Pan the canvas left and right when scrolling left to right on the touchpad" msgstr "在觸控板上左右滾動時，將畫布左右平移" #: common/dialogs/panel_mouse_settings_base.cpp:301 msgid "Reset to Mouse Defaults" msgstr "重置為滑鼠預設值" #: common/dialogs/panel_mouse_settings_base.cpp:304 msgid "Reset to Trackpad Defaults" msgstr "重置為觸控板預設值" #: common/dialogs/panel_setup_netclasses.cpp:91 common/eda_shape.cpp:1682 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:353 #: include/stroke_params.h:72 pcbnew/dialogs/dialog_copper_zones_base.cpp:232 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:358 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:329 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:716 pcbnew/footprint.cpp:2889 #: pcbnew/pad.cpp:1734 pcbnew/zone.cpp:602 pcbnew/zone.cpp:1383 msgid "Solid" msgstr "實心" #: common/dialogs/panel_setup_netclasses.cpp:93 common/eda_shape.cpp:1683 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:353 #: include/stroke_params.h:73 msgid "Dashed" msgstr "虛線" #: common/dialogs/panel_setup_netclasses.cpp:95 common/eda_shape.cpp:1684 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:353 #: include/stroke_params.h:74 msgid "Dotted" msgstr "點線" #: common/dialogs/panel_setup_netclasses.cpp:97 common/eda_shape.cpp:1685 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:353 #: include/stroke_params.h:75 msgid "Dash-Dot" msgstr "點劃線" #: common/dialogs/panel_setup_netclasses.cpp:99 common/eda_shape.cpp:1686 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:353 #: include/stroke_params.h:76 msgid "Dash-Dot-Dot" msgstr "雙點劃線" #: common/dialogs/panel_setup_netclasses.cpp:430 msgid "Netclass must have a name." msgstr "網路類必須要有一個名稱。" #: common/dialogs/panel_setup_netclasses.cpp:439 msgid "Netclass name already in use." msgstr "網路類名稱已經在使用。" #: common/dialogs/panel_setup_netclasses.cpp:500 msgid "Minimum copper clearance" msgstr "最小銅間隙" #: common/dialogs/panel_setup_netclasses.cpp:501 msgid "Minimum track width" msgstr "最小布線寬度" #: common/dialogs/panel_setup_netclasses.cpp:502 msgid "Via pad diameter" msgstr "過孔焊盤直徑" #: common/dialogs/panel_setup_netclasses.cpp:503 msgid "Via plated hole diameter" msgstr "通孔鍍孔直徑" #: common/dialogs/panel_setup_netclasses.cpp:504 msgid "Microvia pad diameter" msgstr "微孔焊盤直徑" #: common/dialogs/panel_setup_netclasses.cpp:505 msgid "Microvia plated hole diameter" msgstr "微孔鍍孔直徑" #: common/dialogs/panel_setup_netclasses.cpp:506 msgid "Differential pair track width" msgstr "差分對佈線寬度" #: common/dialogs/panel_setup_netclasses.cpp:507 msgid "Differential pair gap" msgstr "差分對間隙" #: common/dialogs/panel_setup_netclasses.cpp:508 msgid "Schematic wire thickness" msgstr "原理圖線粗細" #: common/dialogs/panel_setup_netclasses.cpp:509 msgid "Bus wire thickness" msgstr "匯流排線粗細" #: common/dialogs/panel_setup_netclasses.cpp:510 msgid "Schematic wire color" msgstr "原理圖線色" #: common/dialogs/panel_setup_netclasses.cpp:511 msgid "Schematic wire line style" msgstr "原理圖線樣式" #: common/dialogs/panel_setup_netclasses.cpp:562 msgid "The default net class is required." msgstr "預設的網路類是必需的。" #: common/dialogs/panel_setup_netclasses.cpp:706 #, c-format msgid "Nets matching '%s':" msgstr "匹配 '%s'的網路：" #: common/dialogs/panel_setup_netclasses_base.cpp:32 msgid "Netclasses:" msgstr "網路類：" #: common/dialogs/panel_setup_netclasses_base.cpp:52 #: pcbnew/tools/board_inspection_tool.cpp:493 #: pcbnew/tools/board_inspection_tool.cpp:998 msgid "Clearance" msgstr "間隙" #: common/dialogs/panel_setup_netclasses_base.cpp:53 #: pcb_calculator/pcb_calculator_frame.cpp:80 #: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:228 #: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:104 #: pcbnew/tools/board_inspection_tool.cpp:317 #: pcbnew/tools/board_inspection_tool.cpp:1151 msgid "Track Width" msgstr "佈線寬度" #: common/dialogs/panel_setup_netclasses_base.cpp:54 #: pcb_calculator/pcb_calculator_frame.cpp:79 #: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:108 msgid "Via Size" msgstr "過孔外徑" #: common/dialogs/panel_setup_netclasses_base.cpp:55 #: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:230 msgid "Via Hole" msgstr "輔助孔" #: common/dialogs/panel_setup_netclasses_base.cpp:56 msgid "uVia Size" msgstr "微孔外徑" #: common/dialogs/panel_setup_netclasses_base.cpp:57 #: pcbnew/dialogs/dialog_global_edit_tracks_and_vias.cpp:232 msgid "uVia Hole" msgstr "微形輔助孔" #: common/dialogs/panel_setup_netclasses_base.cpp:58 msgid "DP Width" msgstr "差分對線寬" #: common/dialogs/panel_setup_netclasses_base.cpp:59 msgid "DP Gap" msgstr "差分對間距" #: common/dialogs/panel_setup_netclasses_base.cpp:60 msgid "Wire Thickness" msgstr "線粗細" #: common/dialogs/panel_setup_netclasses_base.cpp:61 msgid "Bus Thickness" msgstr "匯流排粗細" #: common/dialogs/panel_setup_netclasses_base.cpp:63 #: common/stroke_params.cpp:210 eeschema/sch_line.cpp:940 msgid "Line Style" msgstr "線型" #: common/dialogs/panel_setup_netclasses_base.cpp:69 common/eda_shape.cpp:1681 #: common/pgm_base.cpp:87 common/stroke_params.cpp:199 #: common/widgets/footprint_select_widget.cpp:142 #: eeschema/dialogs/dialog_global_edit_text_and_graphics.cpp:70 #: eeschema/dialogs/dialog_junction_props.cpp:46 #: eeschema/dialogs/dialog_line_properties.cpp:56 #: eeschema/dialogs/dialog_sim_model.cpp:494 #: eeschema/dialogs/dialog_wire_bus_properties.cpp:59 #: eeschema/dialogs/panel_setup_formatting_base.cpp:149 #: eeschema/lib_field.cpp:542 eeschema/lib_text.cpp:427 #: eeschema/lib_textbox.cpp:482 eeschema/sch_field.cpp:748 #: eeschema/sch_label.cpp:909 eeschema/sch_text.cpp:485 #: eeschema/sch_textbox.cpp:430 include/stroke_params.h:80 #: pcbnew/fp_text.cpp:309 pcbnew/fp_textbox.cpp:315 #: pcbnew/pcb_dimension.cpp:329 pcbnew/pcb_text.cpp:125 #: pcbnew/pcb_textbox.cpp:291 msgid "Default" msgstr "預設" #: common/dialogs/panel_setup_netclasses_base.cpp:94 msgid "Set color to transparent to use KiCad default color." msgstr "將顏色設為透明以使用 Kicad 預設顏色。" #: common/dialogs/panel_setup_netclasses_base.cpp:112 msgid "Netclass assignments:" msgstr "網路類分配：" #: common/dialogs/panel_setup_netclasses_base.cpp:136 msgid "Pattern" msgstr "圖案" #: common/dialogs/panel_setup_netclasses_base.cpp:137 #: eeschema/sch_field.cpp:870 eeschema/sch_label.cpp:188 #: pcbnew/board_connected_item.cpp:177 pcbnew/pad.cpp:1772 pcbnew/zone.cpp:1446 msgid "Net Class" msgstr "網路類" #: common/dialogs/panel_setup_severities.cpp:43 #: common/dialogs/panel_setup_severities.cpp:117 pcbnew/pcb_marker.cpp:199 msgid "Ignore" msgstr "忽略" #: common/dialogs/panel_setup_severities.cpp:117 msgid "From Pin Conflicts Map" msgstr "與引腳衝突圖相同" #: common/dialogs/panel_text_variables.cpp:121 #: common/dialogs/panel_text_variables.cpp:149 msgid "Variable name cannot be empty." msgstr "變數名不能為空。" #: common/dialogs/panel_text_variables_base.cpp:37 msgid "Variable Name" msgstr "變數名" #: common/dialogs/panel_text_variables_base.cpp:38 msgid "Text Substitution" msgstr "文字替換" #: common/draw_panel_gal.cpp:317 common/draw_panel_gal.cpp:483 msgid "Could not use OpenGL, falling back to software rendering" msgstr "無法使用 OpenGL，回退到軟體渲染" #: common/draw_panel_gal.cpp:323 common/draw_panel_gal.cpp:490 msgid "Could not use OpenGL" msgstr "無法使用 OpenGL" #: common/drawing_sheet/drawing_sheet_parser.cpp:932 #, c-format msgid "Drawing sheet '%s' not found." msgstr "未找到圖紙 \"%s\"。" #: common/drawing_sheet/drawing_sheet_parser.cpp:942 #, c-format msgid "Drawing sheet '%s' could not be opened." msgstr "無法開啟圖紙 \"%s\"。" #: common/drawing_sheet/drawing_sheet_parser.cpp:955 #, c-format msgid "Drawing sheet '%s' was not fully read." msgstr "圖紙 '%s' 沒有被完全讀取。" #: common/drawing_sheet/ds_data_item.cpp:369 #: common/drawing_sheet/ds_draw_item.cpp:121 common/eda_item.cpp:329 #: common/eda_item.cpp:331 common/eda_item.cpp:362 common/eda_item.cpp:383 #: common/eda_text.cpp:1032 eeschema/dialogs/panel_setup_formatting_base.cpp:47 #: eeschema/lib_field.cpp:538 eeschema/lib_text.cpp:425 eeschema/lib_text.h:55 #: eeschema/sch_field.cpp:744 #: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:39 #: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:142 #: pcbnew/dialogs/dialog_global_deletion_base.cpp:28 pcbnew/fp_text.cpp:279 #: pcbnew/fp_text.cpp:291 pcbnew/widgets/panel_selection_filter.cpp:187 #: pcbnew/widgets/panel_selection_filter_base.cpp:33 #: pcbnew/widgets/search_handlers.cpp:249 msgid "Text" msgstr "文字" #: common/drawing_sheet/ds_data_item.cpp:370 #: common/drawing_sheet/ds_draw_item.cpp:113 common/eda_item.cpp:360 #: common/eda_shape.cpp:64 eeschema/pin_type.cpp:79 #: gerbview/gerber_draw_item.cpp:212 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:134 #: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:59 #: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:120 msgid "Line" msgstr "線" #: common/drawing_sheet/ds_data_item.cpp:371 #: common/drawing_sheet/ds_draw_item.cpp:117 common/eda_shape.cpp:619 #: common/eda_shape.cpp:1675 #: eeschema/dialogs/dialog_label_properties_base.cpp:178 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45 #: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:162 #: pcbnew/dialogs/dialog_pad_properties.cpp:743 pcbnew/pad.cpp:1710 msgid "Rectangle" msgstr "矩形" #: common/drawing_sheet/ds_data_item.cpp:372 #: common/drawing_sheet/ds_draw_item.cpp:125 #: common/drawing_sheet/ds_draw_item.cpp:288 msgid "Imported Shape" msgstr "匯入的形狀" #: common/drawing_sheet/ds_data_item.cpp:373 #: common/drawing_sheet/ds_draw_item.cpp:129 #: common/drawing_sheet/ds_draw_item.cpp:468 common/eda_item.cpp:390 #: eeschema/dialogs/dialog_image_properties.cpp:40 eeschema/sch_bitmap.h:131 #: pcbnew/dialogs/dialog_image_properties.cpp:41 pcbnew/pcb_bitmap.h:120 msgid "Image" msgstr "圖片" #: common/drawing_sheet/ds_data_model_io.cpp:92 #: common/drawing_sheet/ds_data_model_io.cpp:121 msgid "Error writing drawing sheet file" msgstr "寫入圖紙檔案出錯" #: common/drawing_sheet/ds_draw_item.cpp:135 msgid "First Page Only" msgstr "僅第一頁" #: common/drawing_sheet/ds_draw_item.cpp:136 msgid "Subsequent Pages" msgstr "後續圖框" #: common/drawing_sheet/ds_draw_item.cpp:137 msgid "All Pages" msgstr "所有圖框" #: common/drawing_sheet/ds_draw_item.cpp:140 msgid "First Page Option" msgstr "第一頁選項" #: common/drawing_sheet/ds_draw_item.cpp:144 msgid "Repeat Count" msgstr "重複計數" #: common/drawing_sheet/ds_draw_item.cpp:148 msgid "Repeat Label Increment" msgstr "重複標籤增量" #: common/drawing_sheet/ds_draw_item.cpp:154 msgid "Repeat Position Increment" msgstr "重複位置增量" #: common/drawing_sheet/ds_draw_item.cpp:156 #: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:38 msgid "Comment" msgstr "註釋" #: common/drawing_sheet/ds_draw_item.cpp:193 #, c-format msgid "Text '%s'" msgstr "文字 '%s'" #: common/drawing_sheet/ds_draw_item.cpp:384 eeschema/lib_shape.cpp:482 #: eeschema/sch_shape.cpp:459 #, c-format msgid "Rectangle, width %s height %s" msgstr "矩形，寬度 %s 高度 %s" #: common/drawing_sheet/ds_draw_item.cpp:417 #, c-format msgid "Line, length %s" msgstr "線，長度 %s" #: common/drawing_sheet/ds_draw_item.cpp:474 #: gerbview/dialogs/panel_gerbview_color_settings.cpp:105 #: gerbview/widgets/gerbview_layer_widget.cpp:139 msgid "Page Limits" msgstr "圖框限制" #: common/dsnlexer.cpp:35 msgid "clipboard" msgstr "剪貼簿" #: common/dsnlexer.cpp:329 #, c-format msgid "Expecting %s" msgstr "預期 %s" #: common/dsnlexer.cpp:337 #, c-format msgid "Expecting '%s'" msgstr "預期 '%s'" #: common/dsnlexer.cpp:345 #, c-format msgid "Unexpected %s" msgstr "未預料的 %s" #: common/dsnlexer.cpp:353 #, c-format msgid "%s is a duplicate" msgstr "%s 是重複的" #: common/dsnlexer.cpp:361 #, c-format msgid "Unexpected '%s'" msgstr "未預料的 '%s'" #: common/dsnlexer.cpp:411 #, c-format msgid "need a number for '%s'" msgstr "'%s' 需要一個數字" #: common/dsnlexer.cpp:696 common/dsnlexer.cpp:757 msgid "Un-terminated delimited string" msgstr "無結尾的分隔字串" #: common/dsnlexer.cpp:718 msgid "String delimiter must be a single character of ', \", or $" msgstr "字串分割符號必須為 ' , \" , $ 之一的單字元" #: common/dsnlexer.cpp:840 #, c-format msgid "" "Invalid floating point number in\n" "file: '%s'\n" "line: %d\n" "offset: %d" msgstr "" "無效的浮點數在\n" "檔案：\"%s\"\n" "行：%d\n" "位移：%d" #: common/dsnlexer.cpp:849 #, c-format msgid "" "Missing floating point number in\n" "file: '%s'\n" "line: %d\n" "offset: %d" msgstr "" "無效的浮點數在\n" "檔案：\"%s\"\n" "行：%d\n" "偏移：%d" #: common/dsnlexer.cpp:874 msgid "Invalid floating point number" msgstr "無效的浮點數" #: common/eda_base_frame.cpp:475 msgid "&About KiCad" msgstr "關於 KiCad (&A)" #: common/eda_base_frame.cpp:953 #, c-format msgid "File '%s' was not found." msgstr "沒有找到檔案 \"%s\"。" #: common/eda_base_frame.cpp:1004 msgid "Preferences" msgstr "偏好設定" #: common/eda_base_frame.cpp:1015 common/hotkey_store.cpp:71 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:20 msgid "Common" msgstr "共同" #: common/eda_base_frame.cpp:1016 msgid "Mouse and Touchpad" msgstr "滑鼠和觸控板" #: common/eda_base_frame.cpp:1017 msgid "Hotkeys" msgstr "快捷鍵" #: common/eda_base_frame.cpp:1020 msgid "Data Collection" msgstr "資料收集" #: common/eda_base_frame.cpp:1036 common/tool/actions.cpp:606 #: eeschema/symbol_editor/symbol_editor.cpp:86 #: kicad/tools/kicad_manager_actions.cpp:86 msgid "Symbol Editor" msgstr "符號編輯器" #: common/eda_base_frame.cpp:1037 common/eda_base_frame.cpp:1045 #: common/eda_base_frame.cpp:1066 common/eda_base_frame.cpp:1075 #: common/eda_base_frame.cpp:1104 common/eda_base_frame.cpp:1121 msgid "Display Options" msgstr "顯示選項" #: common/eda_base_frame.cpp:1038 common/eda_base_frame.cpp:1046 #: common/eda_base_frame.cpp:1067 common/eda_base_frame.cpp:1076 #: pcbnew/dialogs/panel_edit_options_base.cpp:24 #: pcbnew/tools/zone_filler_tool.cpp:276 msgid "Editing Options" msgstr "編輯選項" #: common/eda_base_frame.cpp:1039 common/eda_base_frame.cpp:1048 #: common/eda_base_frame.cpp:1068 common/eda_base_frame.cpp:1077 #: common/eda_base_frame.cpp:1088 common/eda_base_frame.cpp:1105 #: common/eda_base_frame.cpp:1122 msgid "Colors" msgstr "顏色" #: common/eda_base_frame.cpp:1044 common/hotkey_store.cpp:73 #: eeschema/menubar.cpp:139 eeschema/sch_edit_frame.cpp:1578 #: kicad/tools/kicad_manager_actions.cpp:80 msgid "Schematic Editor" msgstr "原理圖編輯器" #: common/eda_base_frame.cpp:1047 msgid "Annotation Options" msgstr "批註選項" #: common/eda_base_frame.cpp:1050 #: eeschema/dialogs/dialog_schematic_setup.cpp:77 msgid "Field Name Templates" msgstr "欄位名稱模板" #: common/eda_base_frame.cpp:1065 common/tool/actions.cpp:616 #: kicad/tools/kicad_manager_actions.cpp:98 pcbnew/footprint_edit_frame.cpp:930 #: pcbnew/menubar_footprint_editor.cpp:92 msgid "Footprint Editor" msgstr "封裝編輯器" #: common/eda_base_frame.cpp:1069 #: pagelayout_editor/dialogs/properties_frame_base.cpp:466 msgid "Default Values" msgstr "預設值" #: common/eda_base_frame.cpp:1074 common/hotkey_store.cpp:74 #: kicad/tools/kicad_manager_actions.cpp:92 pcbnew/menubar_pcb_editor.cpp:185 #: pcbnew/pcb_edit_frame.cpp:183 pcbnew/pcb_edit_frame.cpp:1563 #: pcbnew/tools/zone_filler_tool.cpp:277 msgid "PCB Editor" msgstr "PCB 編輯器" #: common/eda_base_frame.cpp:1078 msgid "Action Plugins" msgstr "操作外掛" #: common/eda_base_frame.cpp:1079 msgid "Origins & Axes" msgstr "原點和軸" #: common/eda_base_frame.cpp:1085 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:173 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:303 #: eeschema/dialogs/dialog_schematic_setup.cpp:75 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:125 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:255 #: kicad/pcm/dialogs/panel_pcm_settings_base.cpp:17 #: pcbnew/dialogs/dialog_board_statistics_base.cpp:209 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:87 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:255 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:226 #: pcbnew/dialogs/dialog_pad_properties_base.cpp:571 msgid "General" msgstr "通用" #: common/eda_base_frame.cpp:1086 msgid "Realtime Renderer" msgstr "實時渲染器" #: common/eda_base_frame.cpp:1087 msgid "Raytracing Renderer" msgstr "光線追蹤渲染器" #: common/eda_base_frame.cpp:1103 common/hotkey_store.cpp:77 #: gerbview/gerbview_frame.cpp:611 gerbview/gerbview_frame.cpp:635 #: gerbview/menubar.cpp:160 kicad/tools/kicad_manager_actions.cpp:104 msgid "Gerber Viewer" msgstr "Gerber 檔案檢視器" #: common/eda_base_frame.cpp:1106 msgid "Excellon Options" msgstr "Excellon 選項" #: common/eda_base_frame.cpp:1120 common/hotkey_store.cpp:75 #: kicad/tools/kicad_manager_actions.cpp:121 pagelayout_editor/menubar.cpp:89 #: pagelayout_editor/pl_editor_frame.cpp:565 msgid "Drawing Sheet Editor" msgstr "圖紙編輯器" #: common/eda_base_frame.cpp:1124 kicad/pcm/dialogs/dialog_pcm.cpp:204 #: kicad/tools/kicad_manager_actions.cpp:127 msgid "Plugin and Content Manager" msgstr "外掛和工具管理器" #: common/eda_base_frame.cpp:1208 #, c-format msgid "Insufficient permissions to folder '%s'." msgstr "對資料夾 '%s' 的許可權不足。" #: common/eda_base_frame.cpp:1249 #, c-format msgid "" "Well this is potentially embarrassing!\n" "It appears that the last time you were editing\n" "%s\n" "KiCad exited before saving.\n" "\n" "Do you wish to open the auto-saved file instead?" msgstr "" "好吧，這可能很尷尬！\n" "似乎你上次在\n" "編輯 %s 時\n" "還沒儲存，KiCad 就退出了。\n" "\n" "你想開啟自動儲存檔案嗎？" #: common/eda_base_frame.cpp:1266 msgid "The auto save file could not be renamed to the board file name." msgstr "自動儲存檔案不能重新命名為電路板檔名稱。" #: common/eda_doc.cpp:130 msgid "Documentation File" msgstr "文件檔案" #: common/eda_doc.cpp:140 #, c-format msgid "Documentation file '%s' not found." msgstr "沒有找到文件檔案 '%s'。" #: common/eda_doc.cpp:183 #, c-format msgid "Unknown MIME type for documentation file '%s'" msgstr "文件檔案 \"%s\" 的 MIME 型別未知" #: common/eda_draw_frame.cpp:144 common/tool/actions.cpp:503 #: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:31 #: pagelayout_editor/pl_editor_frame.cpp:161 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122 #: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:55 #: pcbnew/dialogs/dialog_gendrill_base.cpp:106 #: pcbnew/dialogs/dialog_plot_base.cpp:350 #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:91 #: pcbnew/import_gfx/dialog_import_gfx.cpp:49 msgid "Inches" msgstr "英寸" #: common/eda_draw_frame.cpp:150 pagelayout_editor/pl_editor_frame.cpp:164 #: pcbnew/tools/drawing_tool.cpp:297 pcbnew/tools/edit_tool_move_fct.cpp:347 #: pcbnew/tools/pcb_actions.cpp:742 msgid "Constrain to H, V, 45" msgstr "約束為水平、垂直或 45 度" #: common/eda_draw_frame.cpp:372 msgid "Edit User Grid..." msgstr "編輯使用者網格..." #: common/eda_draw_frame.cpp:524 msgid "Zoom Auto" msgstr "自動縮放" #: common/eda_draw_frame.cpp:533 #, c-format msgid "Zoom %.2f" msgstr "縮放 %.2f" #: common/eda_draw_frame.cpp:624 pagelayout_editor/pl_editor_frame.cpp:750 msgid "inches" msgstr "英寸" #: common/eda_draw_frame.cpp:625 #: eeschema/dialogs/dialog_junction_props_base.cpp:34 #: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:110 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:303 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:314 #: eeschema/dialogs/panel_setup_formatting_base.cpp:62 #: eeschema/dialogs/panel_setup_formatting_base.cpp:118 #: eeschema/dialogs/panel_setup_formatting_base.cpp:129 #: eeschema/dialogs/panel_sym_editing_options_base.cpp:43 #: eeschema/dialogs/panel_sym_editing_options_base.cpp:58 #: eeschema/dialogs/panel_sym_editing_options_base.cpp:69 #: eeschema/dialogs/panel_sym_editing_options_base.cpp:80 #: eeschema/dialogs/panel_sym_editing_options_base.cpp:91 #: eeschema/dialogs/panel_sym_editing_options_base.cpp:130 #: pagelayout_editor/pl_editor_frame.cpp:751 msgid "mils" msgstr "mils" #: common/eda_draw_frame.cpp:627 #: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:57 #: pcbnew/footprint_wizard_frame.cpp:327 pcbnew/pcb_dimension.cpp:327 msgid "Units" msgstr "單元" #: common/eda_draw_frame.cpp:1055 eeschema/dialogs/panel_sym_lib_table.cpp:504 #: pcbnew/footprint_libraries_utils.cpp:1394 msgid "Select Library" msgstr "選擇庫" #: common/eda_draw_frame.cpp:1055 msgid "New Library" msgstr "新建庫" #: common/eda_item.cpp:323 msgid "Screen" msgstr "螢幕" #: common/eda_item.cpp:325 eeschema/dialogs/dialog_symbol_fields_table.cpp:1041 #: eeschema/sch_symbol.cpp:1698 pcbnew/build_BOM_from_board.cpp:110 #: pcbnew/dialogs/dialog_board_reannotate_base.cpp:141 pcbnew/fp_shape.cpp:116 #: pcbnew/fp_text.cpp:287 pcbnew/load_select_footprint.cpp:376 #: pcbnew/pad.cpp:964 pcbnew/plot_board_layers.cpp:97 msgid "Footprint" msgstr "封裝" #: common/eda_item.cpp:326 pcbnew/dialogs/dialog_board_statistics.cpp:501 #: pcbnew/pad.cpp:967 msgid "Pad" msgstr "焊盤" #: common/eda_item.cpp:327 common/eda_item.cpp:333 common/eda_item.cpp:382 msgid "Graphic" msgstr "圖形" #: common/eda_item.cpp:328 common/eda_item.cpp:361 eeschema/sch_bitmap.cpp:218 #: pcbnew/pcb_bitmap.cpp:229 msgid "Bitmap" msgstr "點陣圖" #: common/eda_item.cpp:330 common/eda_item.cpp:332 common/eda_item.cpp:363 #: common/eda_item.cpp:384 eeschema/lib_textbox.cpp:480 #: eeschema/sch_textbox.cpp:428 pcbnew/fp_textbox.cpp:306 #: pcbnew/pcb_textbox.cpp:282 msgid "Text Box" msgstr "文字框" #: common/eda_item.cpp:334 common/eda_item.cpp:335 common/eda_item.cpp:336 #: common/eda_item.cpp:337 common/eda_item.cpp:344 common/eda_item.cpp:345 #: common/eda_item.cpp:346 common/eda_item.cpp:347 pcbnew/pcb_dimension.cpp:296 msgid "Dimension" msgstr "標註" #: common/eda_item.cpp:338 common/eda_item.cpp:348 pcbnew/pcb_dimension.cpp:962 #: pcbnew/pcb_dimension.cpp:1082 msgid "Leader" msgstr "引線" #: common/eda_item.cpp:339 common/eda_item.cpp:350 #: pcbnew/tools/board_inspection_tool.cpp:634 msgid "Zone" msgstr "敷銅" #: common/eda_item.cpp:340 common/eda_item.cpp:341 pcbnew/pcb_track.cpp:853 msgid "Track" msgstr "佈線" #: common/eda_item.cpp:342 pcbnew/dialogs/dialog_board_statistics.cpp:501 #: pcbnew/pcb_track.cpp:851 pcbnew/pcb_track.cpp:934 msgid "Via" msgstr "過孔" #: common/eda_item.cpp:343 common/eda_item.cpp:355 pcbnew/pcb_marker.cpp:193 msgid "Marker" msgstr "標記" #: common/eda_item.cpp:349 pcbnew/pcb_target.cpp:125 msgid "Target" msgstr "目標" #: common/eda_item.cpp:351 msgid "ItemList" msgstr "專案列表" #: common/eda_item.cpp:352 msgid "NetInfo" msgstr "網路資訊" #: common/eda_item.cpp:353 pcbnew/pcb_group.cpp:399 #: pcbnew/tools/pcb_actions.cpp:758 msgid "Group" msgstr "分組" #: common/eda_item.cpp:356 eeschema/sch_junction.h:97 msgid "Junction" msgstr "結點" #: common/eda_item.cpp:357 msgid "No-Connect Flag" msgstr "不連線標誌" #: common/eda_item.cpp:358 msgid "Wire Entry" msgstr "連線線入口" #: common/eda_item.cpp:359 msgid "Bus Entry" msgstr "匯流排入口" #: common/eda_item.cpp:364 msgid "Net Label" msgstr "網路標籤" #: common/eda_item.cpp:365 eeschema/sch_label.cpp:895 #: eeschema/sch_label.cpp:1264 msgid "Directive Label" msgstr "指令標籤" #: common/eda_item.cpp:366 eeschema/sch_label.cpp:896 msgid "Global Label" msgstr "全域性標籤" #: common/eda_item.cpp:367 eeschema/sch_label.cpp:897 msgid "Hierarchical Label" msgstr "層次標籤" #: common/eda_item.cpp:368 eeschema/dialogs/dialog_symbol_fields_table.cpp:765 #: eeschema/lib_field.cpp:535 eeschema/lib_field.h:78 #: eeschema/sch_label.cpp:190 msgid "Field" msgstr "欄位" #: common/eda_item.cpp:369 common/eda_item.cpp:381 #: eeschema/symbol_editor/symbol_editor.cpp:1271 msgid "Symbol" msgstr "符號" #: common/eda_item.cpp:370 common/eda_item.cpp:385 eeschema/lib_pin.h:71 #: eeschema/sch_pin.cpp:207 msgid "Pin" msgstr "引腳" #: common/eda_item.cpp:371 msgid "Sheet Pin" msgstr "圖紙頁碼" #: common/eda_item.cpp:372 eeschema/dialogs/dialog_migrate_buses.cpp:103 #: pcbnew/tools/pcb_actions.cpp:1360 msgid "Sheet" msgstr "圖框" #: common/eda_item.cpp:379 msgid "SCH Screen" msgstr "原理圖螢幕" #: common/eda_item.cpp:386 eeschema/sch_field.cpp:741 msgid "Symbol Field" msgstr "符號欄位" #: common/eda_item.cpp:388 msgid "Gerber Layout" msgstr "Gerber 佈局" #: common/eda_item.cpp:389 msgid "Draw Item" msgstr "繪製專案" #: common/eda_shape.cpp:60 #: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:160 msgid "Number Box" msgstr "編號框" #: common/eda_shape.cpp:65 pcbnew/pad.cpp:1219 msgid "Rect" msgstr "矩形" #: common/eda_shape.cpp:66 common/eda_shape.cpp:616 common/eda_shape.cpp:1676 #: gerbview/gerber_draw_item.cpp:213 #: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:111 #: pcbnew/dialogs/dialog_pad_properties.cpp:716 #: pcbnew/dialogs/dialog_pad_properties.cpp:2163 msgid "Arc" msgstr "弧" #: common/eda_shape.cpp:67 common/eda_shape.cpp:615 common/eda_shape.cpp:1677 #: eeschema/dialogs/dialog_label_properties_base.cpp:172 #: gerbview/gerber_draw_item.cpp:214 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45 #: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:135 #: pcbnew/dialogs/dialog_pad_properties.cpp:726 pcbnew/pad.cpp:1217 #: pcbnew/pad.cpp:1709 msgid "Circle" msgstr "圓形" #: common/eda_shape.cpp:68 msgid "Bezier Curve" msgstr "貝塞爾曲線" #: common/eda_shape.cpp:69 common/eda_shape.cpp:618 common/eda_shape.cpp:1678 #: pcbnew/dialogs/dialog_pad_properties.cpp:734 #: pcbnew/dialogs/dialog_pad_properties.cpp:2166 msgid "Polygon" msgstr "多邊形" #: common/eda_shape.cpp:617 msgid "Curve" msgstr "曲線" #: common/eda_shape.cpp:619 msgid "Pad Number Box" msgstr "焊盤編號框" #: common/eda_shape.cpp:620 common/eda_shape.cpp:1674 #: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:79 #: pcbnew/dialogs/dialog_pad_properties.cpp:704 #: pcbnew/dialogs/dialog_pad_properties.cpp:2162 msgid "Segment" msgstr "線段" #: common/eda_shape.cpp:621 msgid "Unrecognized" msgstr "無法識別" #: common/eda_shape.cpp:631 common/eda_shape.cpp:1690 #: eeschema/dialogs/dialog_label_properties_base.cpp:152 #: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:53 #: pcbnew/dialogs/dialog_board_statistics_base.cpp:228 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:120 #: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:44 #: pcbnew/microwave/microwave_polygon.cpp:130 pcbnew/pad.cpp:1780 #: pcbnew/pcb_target.cpp:157 pcbnew/pcb_target.cpp:204 #: pcbnew/pcb_textbox.cpp:510 msgid "Shape" msgstr "形狀" #: common/eda_shape.cpp:637 common/eda_shape.cpp:644 #: pcbnew/dialogs/dialog_graphic_item_properties.cpp:213 #: pcbnew/pcb_track.cpp:874 msgid "Radius" msgstr "半徑" #: common/eda_shape.cpp:642 common/eda_shape.cpp:672 common/eda_shape.cpp:1709 #: pcbnew/fp_text.cpp:307 pcbnew/fp_textbox.cpp:313 pcbnew/pcb_text.cpp:123 #: pcbnew/pcb_textbox.cpp:289 msgid "Angle" msgstr "角度" #: common/eda_shape.cpp:648 common/eda_shape.cpp:666 #: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:127 #: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:95 #: eeschema/lib_pin.cpp:1169 eeschema/sch_pin.cpp:225 msgid "Length" msgstr "長度" #: common/eda_shape.cpp:653 msgid "Points" msgstr "點" #: common/eda_shape.cpp:657 common/eda_text.cpp:1060 #: eeschema/sch_bitmap.cpp:220 pcbnew/dialogs/dialog_board_statistics.cpp:671 #: pcbnew/dialogs/dialog_board_statistics.cpp:681 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:55 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:55 #: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:40 #: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:169 #: pcbnew/fp_text.cpp:311 pcbnew/fp_text_grid_table.cpp:102 pcbnew/pad.cpp:1015 #: pcbnew/pcb_bitmap.cpp:231 pcbnew/pcb_target.cpp:156 #: pcbnew/pcb_target.cpp:201 pcbnew/pcb_text.cpp:127 pcbnew/pcb_track.cpp:869 #: pcbnew/pcb_track.cpp:1275 pcbnew/pcb_track.cpp:1305 msgid "Width" msgstr "寬度" #: common/eda_shape.cpp:660 common/eda_text.cpp:1065 #: eeschema/sch_bitmap.cpp:221 pcbnew/dialogs/dialog_board_statistics.cpp:673 #: pcbnew/dialogs/dialog_board_statistics.cpp:682 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:56 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:56 #: pcbnew/fp_text.cpp:312 pcbnew/fp_text_grid_table.cpp:103 pcbnew/pad.cpp:1016 #: pcbnew/pcb_bitmap.cpp:232 pcbnew/pcb_dimension.cpp:736 #: pcbnew/pcb_text.cpp:128 msgid "Height" msgstr "高度" #: common/eda_shape.cpp:1679 #: pcbnew/dialogs/dialog_pad_basicshapes_properties.cpp:97 #: pcbnew/dialogs/dialog_pad_properties.cpp:710 #: pcbnew/dialogs/dialog_pad_properties.cpp:2164 msgid "Bezier" msgstr "貝塞爾曲線" #: common/eda_shape.cpp:1693 pcbnew/pcb_textbox.cpp:511 #: pcbnew/pcb_track.cpp:1278 msgid "Start X" msgstr "起點 X" #: common/eda_shape.cpp:1696 pcbnew/pcb_textbox.cpp:512 #: pcbnew/pcb_track.cpp:1282 msgid "Start Y" msgstr "起點 Y" #: common/eda_shape.cpp:1699 pcbnew/pcb_textbox.cpp:513 #: pcbnew/pcb_track.cpp:1285 msgid "End X" msgstr "結束點 X" #: common/eda_shape.cpp:1702 pcbnew/pcb_textbox.cpp:514 #: pcbnew/pcb_track.cpp:1288 msgid "End Y" msgstr "結束點 Y" #: common/eda_shape.cpp:1706 common/stroke_params.cpp:214 #: pcbnew/pcb_textbox.cpp:515 msgid "Line Width" msgstr "線寬" #: common/eda_shape.cpp:1719 pcbnew/dialogs/dialog_plot_base.cpp:132 msgid "Filled" msgstr "填充" #: common/eda_text.cpp:747 eeschema/lib_textbox.cpp:484 #: eeschema/sch_label.cpp:911 eeschema/sch_text.cpp:487 #: eeschema/sch_textbox.cpp:432 eeschema/symbol_editor/symbol_editor.cpp:1264 #: gerbview/gerber_file_image.cpp:338 gerbview/gerber_file_image.cpp:342 #: gerbview/gerber_file_image.cpp:345 #: pcbnew/microwave/microwave_polygon.cpp:128 #: pcbnew/widgets/appearance_controls.cpp:633 #: pcbnew/widgets/appearance_controls.cpp:1758 msgid "Normal" msgstr "正常" #: common/eda_text.cpp:748 common/eda_text.cpp:1045 #: eeschema/dialogs/dialog_field_properties_base.cpp:142 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:236 #: eeschema/dialogs/dialog_label_properties_base.cpp:93 #: eeschema/dialogs/dialog_label_properties_base.cpp:214 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:65 #: eeschema/dialogs/dialog_lib_text_properties_base.cpp:107 #: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:89 #: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:105 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:65 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:62 #: eeschema/dialogs/dialog_text_properties_base.cpp:110 #: eeschema/fields_grid_table.cpp:344 eeschema/lib_textbox.cpp:484 #: eeschema/sch_label.cpp:911 eeschema/sch_text.cpp:487 #: eeschema/sch_textbox.cpp:432 #: pagelayout_editor/dialogs/properties_frame_base.cpp:98 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:58 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:58 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:288 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:205 #: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:133 #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:50 #: pcbnew/fp_text_grid_table.cpp:105 msgid "Italic" msgstr "斜體" #: common/eda_text.cpp:749 common/eda_text.cpp:1049 #: eeschema/dialogs/dialog_field_properties_base.cpp:137 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:214 #: eeschema/dialogs/dialog_label_properties_base.cpp:94 #: eeschema/dialogs/dialog_label_properties_base.cpp:209 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:66 #: eeschema/dialogs/dialog_lib_text_properties_base.cpp:102 #: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:84 #: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:100 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:66 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:63 #: eeschema/dialogs/dialog_text_properties_base.cpp:105 #: eeschema/fields_grid_table.cpp:345 eeschema/lib_textbox.cpp:484 #: eeschema/sch_label.cpp:911 eeschema/sch_text.cpp:487 #: eeschema/sch_textbox.cpp:432 eeschema/widgets/tuner_slider_base.cpp:43 #: eeschema/widgets/tuner_slider_base.cpp:48 #: eeschema/widgets/tuner_slider_base.cpp:53 #: eeschema/widgets/tuner_slider_base.cpp:61 #: eeschema/widgets/tuner_slider_base.cpp:69 #: pagelayout_editor/dialogs/properties_frame_base.cpp:93 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:186 msgid "Bold" msgstr "粗體" #: common/eda_text.cpp:750 msgid "Bold+Italic" msgstr "粗體+斜體" #: common/eda_text.cpp:1015 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:224 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:264 #: eeschema/fields_grid_table.cpp:244 eeschema/fields_grid_table.cpp:584 #: eeschema/fields_grid_table.cpp:729 eeschema/lib_field.cpp:550 #: eeschema/lib_text.cpp:435 eeschema/pin_type.cpp:128 #: eeschema/sch_field.cpp:756 msgid "Left" msgstr "向左" #: common/eda_text.cpp:1016 common/eda_text.cpp:1020 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:264 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:288 #: eeschema/fields_grid_table.cpp:237 eeschema/fields_grid_table.cpp:245 #: eeschema/fields_grid_table.cpp:585 eeschema/fields_grid_table.cpp:595 #: eeschema/fields_grid_table.cpp:731 eeschema/fields_grid_table.cpp:743 #: eeschema/lib_field.cpp:551 eeschema/lib_field.cpp:560 #: eeschema/lib_text.cpp:436 eeschema/lib_text.cpp:445 #: eeschema/sch_field.cpp:757 eeschema/sch_field.cpp:766 #: gerbview/gerber_file_image.cpp:342 gerbview/gerber_file_image.cpp:345 msgid "Center" msgstr "居中" #: common/eda_text.cpp:1017 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:224 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:264 #: eeschema/fields_grid_table.cpp:246 eeschema/fields_grid_table.cpp:586 #: eeschema/fields_grid_table.cpp:733 eeschema/lib_field.cpp:552 #: eeschema/lib_text.cpp:437 eeschema/pin_type.cpp:127 #: eeschema/sch_field.cpp:758 msgid "Right" msgstr "向右" #: common/eda_text.cpp:1019 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:288 #: eeschema/fields_grid_table.cpp:236 eeschema/fields_grid_table.cpp:594 #: eeschema/fields_grid_table.cpp:741 eeschema/lib_field.cpp:559 #: eeschema/lib_text.cpp:444 eeschema/sch_field.cpp:765 msgid "Top" msgstr "上對齊" #: common/eda_text.cpp:1021 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:288 #: eeschema/fields_grid_table.cpp:238 eeschema/fields_grid_table.cpp:596 #: eeschema/fields_grid_table.cpp:745 eeschema/lib_field.cpp:561 #: eeschema/lib_text.cpp:446 eeschema/sch_field.cpp:767 msgid "Bottom" msgstr "向下對齊" #: common/eda_text.cpp:1026 #: eeschema/dialogs/dialog_label_properties_base.cpp:96 #: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:124 #: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:92 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:68 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:68 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:65 #: eeschema/fields_grid_table.cpp:347 eeschema/lib_pin.cpp:1172 #: eeschema/sch_pin.cpp:228 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:60 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:60 #: pcbnew/footprint.cpp:2919 pcbnew/fp_text_grid_table.cpp:107 #: pcbnew/pad.cpp:1744 pcbnew/zone.cpp:1463 msgid "Orientation" msgstr "方向" #: common/eda_text.cpp:1030 eeschema/dialogs/dialog_text_properties_base.h:112 #: pcbnew/dialogs/dialog_text_properties.cpp:104 #: pcbnew/dialogs/dialog_text_properties_base.h:111 pcbnew/pcb_text.cpp:347 msgid "Text Properties" msgstr "文字屬性" #: common/eda_text.cpp:1036 pcbnew/pcb_text.cpp:362 msgid "Hyperlink" msgstr "超連結" #: common/eda_text.cpp:1040 #: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:91 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:57 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:57 #: pcbnew/fp_text.cpp:310 pcbnew/fp_text_grid_table.cpp:104 #: pcbnew/fp_textbox.cpp:316 pcbnew/pcb_text.cpp:126 msgid "Thickness" msgstr "厚度" #: common/eda_text.cpp:1052 pcbnew/microwave/microwave_polygon.cpp:128 msgid "Mirrored" msgstr "映象" #: common/eda_text.cpp:1056 #: eeschema/dialogs/dialog_field_properties_base.cpp:87 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:277 #: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:130 #: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:98 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:45 #: eeschema/dialogs/panel_sym_lib_table_base.cpp:95 #: eeschema/dialogs/panel_template_fieldnames_base.cpp:43 #: eeschema/lib_field.cpp:540 eeschema/sch_field.cpp:746 #: eeschema/sch_pin.cpp:223 include/lib_table_grid.h:194 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:134 #: pcbnew/dialogs/dialog_text_properties_base.cpp:88 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:45 #: pcbnew/dialogs/panel_fp_lib_table_base.cpp:94 pcbnew/pcb_text.cpp:359 msgid "Visible" msgstr "可見" #: common/eda_text.cpp:1071 msgid "Horizontal Justification" msgstr "水平對齊" #: common/eda_text.cpp:1076 msgid "Vertical Justification" msgstr "垂直對齊" #: common/env_vars.cpp:71 msgid "" "The base path of locally installed system footprint libraries (.pretty " "folders)." msgstr "本地安裝的系統封裝庫 (.pretty 資料夾) 存放目錄的路徑 。" #: common/env_vars.cpp:74 msgid "The base path of system footprint 3D shapes (.3Dshapes folders)." msgstr "系統封裝 3D 模型 (.3Dshapes 資料夾) 存放目錄的路徑。" #: common/env_vars.cpp:76 msgid "The base path of the locally installed symbol libraries." msgstr "本地安裝的系統符號庫存放目錄的路徑。" #: common/env_vars.cpp:78 msgid "A directory containing project templates installed with KiCad." msgstr "包含與 KiCad 一起安裝的專案模板的目錄。" #: common/env_vars.cpp:80 msgid "" "Optional. Can be defined if you want to create your own project templates " "folder." msgstr "可選的。如果要建立自己的工程模板資料夾，則可以定義。" #: common/env_vars.cpp:83 msgid "" "A directory containing 3rd party plugins, libraries and other downloadable " "content." msgstr "包含第三方外掛、庫和其他可下載工具的目錄。" #: common/env_vars.cpp:86 msgid "" "Internally defined by KiCad (cannot be edited) and is set to the absolute " "path of the currently loaded project file. This environment variable can be " "used to define files and paths relative to the currently loaded project. " "For instance, ${KIPRJMOD}/libs/footprints.pretty can be defined as a folder " "containing a project specific footprint library named footprints.pretty." msgstr "" "由 KiCad 內部定義（不能被編輯），並設定為當前載入的工程檔案的絕對路徑。這個環" "境變數可以用於定義相對於當前載入的工程檔案和路徑。例如，${KIPRJMOD}/libs/" "footprints.pretty 可以被定義為包含名為 footprints.pretty 工程專用封裝庫的檔案" "夾。" #: common/env_vars.cpp:92 msgid "A directory containing system-wide scripts installed with KiCad" msgstr "一個包含用 KiCad 安裝的系統級指令碼的目錄" #: common/env_vars.cpp:94 msgid "A directory containing user-specific scripts installed with KiCad" msgstr "一個包含用 KiCad 安裝的使用者指定指令碼的目錄" #: common/env_vars.cpp:98 msgid "Deprecated version of KICAD_TEMPLATE_DIR." msgstr "KICAD_TEMPLATE_DIR 的棄用版本。" #: common/env_vars.cpp:100 msgid "Deprecated version of KICAD7_3DMODEL_DIR." msgstr "KICAD7_3DMODEL_DIR 的廢棄版本。" #: common/env_vars.cpp:102 msgid "Deprecated version of KICAD7_FOOTPRINT_DIR." msgstr "KICAD7_FOOTPRINT_DIR 的廢棄版本。" #: common/env_vars.cpp:104 msgid "Deprecated version of KICAD_SYMBOL_DIR." msgstr "KICAD_SYMBOL_DIR 的廢棄版本。" #: common/exceptions.cpp:62 #, c-format msgid "from %s : %s() line %d" msgstr "來自 %s : %s() 行：%d" #: common/exceptions.cpp:76 #, c-format msgid "%s in '%s', line %d, offset %d." msgstr "%s 在 \"%s\" 中，行 %d，偏移 %d。" #: common/exceptions.cpp:90 #, c-format msgid "from %s : %s() line:%d" msgstr "來自 %s : %s() 行：%d" #: common/exceptions.cpp:101 #, c-format msgid "" "KiCad was unable to open this file because it was created with a more recent " "version than the one you are running.\n" "\n" "To open it you will need to upgrade KiCad to a version dated %s or later." msgstr "" "KiCad 無法開啟此檔案，該檔案由高於當前執行版本的軟體所建立。\n" "\n" "請將 KiCad 升級到 %s 或更高的版本以開啟改檔案。" #: common/exceptions.cpp:126 msgid "Full error text:" msgstr "完整錯誤文字：" #: common/file_history.cpp:155 msgid "No Files" msgstr "無檔案" #: common/filename_resolver.cpp:453 msgid "The given path does not exist" msgstr "指定的路徑不存在" #: common/filename_resolver.cpp:481 msgid "Alias: " msgstr "別名： " #: common/filename_resolver.cpp:484 msgid "This path:" msgstr "此路徑：" #: common/filename_resolver.cpp:487 msgid "Existing path:" msgstr "現有路徑：" #: common/filename_resolver.cpp:489 msgid "Bad alias (duplicate name)" msgstr "別名錯誤（重複名稱）" #: common/font/font.cpp:90 common/widgets/font_choice.cpp:47 #: eeschema/dialogs/dialog_field_properties_base.cpp:122 #: eeschema/dialogs/dialog_label_properties_base.cpp:195 #: eeschema/dialogs/dialog_lib_text_properties_base.cpp:72 #: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:69 #: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:85 #: eeschema/dialogs/dialog_text_properties_base.cpp:90 #: eeschema/fields_grid_table.cpp:58 #: pagelayout_editor/dialogs/properties_frame_base.cpp:155 msgid "Default Font" msgstr "預設字型" #: common/font/fontconfig.cpp:152 #, c-format msgid "Error loading font '%s'." msgstr "載入字型 '%s' 時出錯。" #: common/font/fontconfig.cpp:154 #, c-format msgid "Font '%s' not found; substituting '%s'." msgstr "未找到字型 \"%s\" ；替代 '%s'。" #: common/footprint_info.cpp:99 cvpcb/cvpcb_mainframe.cpp:975 #: eeschema/symbol_library_manager.cpp:81 #: eeschema/symbol_tree_model_adapter.cpp:108 #: eeschema/symbol_viewer_frame.cpp:363 msgid "Load Error" msgstr "載入錯誤" #: common/footprint_info.cpp:101 msgid "Errors were encountered loading footprints:" msgstr "載入封裝時出現錯誤：" #: common/fp_lib_table.cpp:218 #, c-format msgid "" "Duplicate library nickname '%s' found in footprint library table file line " "%d." msgstr "重複的庫暱稱 '%s' ，位於封裝庫表文件的行 %d 。" #: common/fp_lib_table.cpp:319 #, c-format msgid "fp-lib-table files contain no library named '%s'." msgstr "fp-lib-table 檔案不包含名為 '%s' 的庫。" #: common/fp_lib_table.cpp:546 eeschema/symbol_lib_table.cpp:583 msgid "Added by Plugin and Content Manager" msgstr "由外掛和內容管理器新增" #: common/fp_lib_table.cpp:572 eeschema/symbol_lib_table.cpp:611 #, c-format msgid "Cannot create global library table path '%s'." msgstr "無法建立全域性庫表路徑 '%s'。" #: common/gestfich.cpp:153 #, c-format msgid "Command '%s' could not be found." msgstr "找不到命令 \"%s\"。" #: common/gestfich.cpp:170 #, c-format msgid "Unable to find a PDF viewer for '%s'." msgstr "無法為 '%s' 找到一款 PDF 檢視器。" #: common/gestfich.cpp:185 #, c-format msgid "Problem while running the PDF viewer '%s'." msgstr "執行 PDF 瀏覽器'%s'時出現問題。" #: common/gestfich.cpp:223 eeschema/eeschema.cpp:517 eeschema/eeschema.cpp:552 #: gerbview/gerbview.cpp:245 kicad/project_template.cpp:279 #: pcbnew/pcbnew.cpp:474 #, c-format msgid "Cannot copy file '%s'." msgstr "無法複製檔案 '%s'。" #: common/grid_tricks.cpp:325 common/tool/actions.cpp:153 #: eeschema/tools/ee_actions.cpp:157 pcbnew/dialogs/panel_setup_rules.cpp:113 #: pcbnew/tools/edit_tool.cpp:2003 msgid "Cut" msgstr "剪下" #: common/grid_tricks.cpp:326 msgid "Clear selected cells placing original contents on clipboard" msgstr "將原始內容儲存到剪貼簿並清除所選單元格" #: common/grid_tricks.cpp:327 common/tool/actions.cpp:159 #: eeschema/tools/ee_actions.cpp:162 pcbnew/dialogs/panel_setup_rules.cpp:114 msgid "Copy" msgstr "複製" #: common/grid_tricks.cpp:328 msgid "Copy selected cells to clipboard" msgstr "複製選中的單元格到剪貼簿" #: common/grid_tricks.cpp:329 common/tool/actions.cpp:165 #: pcbnew/dialogs/panel_setup_rules.cpp:115 msgid "Paste" msgstr "貼上" #: common/grid_tricks.cpp:330 msgid "Paste clipboard cells to matrix at current cell" msgstr "將剪貼簿內容貼上到當前單元格位置" #: common/grid_tricks.cpp:331 common/tool/actions.cpp:192 #: kicad/project_tree_pane.cpp:762 pcbnew/dialogs/panel_setup_rules.cpp:116 #: pcbnew/plugins/kicad/pcb_parser.cpp:923 pcbnew/tools/edit_tool.cpp:2005 msgid "Delete" msgstr "刪除" #: common/grid_tricks.cpp:331 msgid "Delete selected cells" msgstr "刪除所選單元格" #: common/grid_tricks.cpp:332 common/tool/actions.cpp:171 #: eeschema/dialogs/dialog_change_symbols_base.cpp:105 #: eeschema/dialogs/dialog_sch_import_settings_base.cpp:68 #: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:47 #: pcbnew/dialogs/dialog_import_settings.cpp:49 #: pcbnew/dialogs/dialog_import_settings.cpp:97 #: pcbnew/dialogs/dialog_import_settings_base.cpp:83 #: pcbnew/dialogs/panel_setup_rules.cpp:120 msgid "Select All" msgstr "全選" #: common/grid_tricks.cpp:332 msgid "Select all cells" msgstr "選擇所有單元格" #: common/hotkey_store.cpp:43 msgid "Pan Left/Right" msgstr "向左/向右平移" #: common/hotkey_store.cpp:44 msgid "Pan Up/Down" msgstr "向上/向下平移" #: common/hotkey_store.cpp:45 eeschema/tools/ee_actions.cpp:263 msgid "Finish Drawing" msgstr "完成繪圖" #: common/hotkey_store.cpp:46 msgid "Add to Selection" msgstr "增加到選區" #: common/hotkey_store.cpp:47 eeschema/tools/ee_actions.cpp:569 #: gerbview/tools/gerbview_actions.cpp:119 pcbnew/tools/pcb_actions.cpp:790 #: pcbnew/tools/pcb_actions.cpp:810 msgid "Highlight Net" msgstr "高亮網路" #: common/hotkey_store.cpp:48 msgid "Remove from Selection" msgstr "從選區刪除" #: common/hotkey_store.cpp:49 msgid "Ignore Grid Snaps" msgstr "忽略網格捕捉" #: common/hotkey_store.cpp:50 msgid "Ignore Other Snaps" msgstr "忽略其他吸附" #: common/hotkey_store.cpp:72 msgid "Project Manager" msgstr "工程管理器" #: common/hotkey_store.cpp:152 msgid "Gestures" msgstr "手勢" #: common/kiway.cpp:239 #, c-format msgid "Failed to verify kiface library '%s' signature." msgstr "無法驗證 kiface 庫 \"%s\" 簽名。" #: common/kiway.cpp:268 #, c-format msgid "Failed to load kiface library '%s'." msgstr "載入 kiface 庫 \"%s\" 失敗。" #: common/kiway.cpp:276 #, c-format msgid "Could not read instance name and version from kiface library '%s'." msgstr "無法從 kiface 庫 \"%s\" 讀取例項名和版本號。" #: common/kiway.cpp:309 #, c-format msgid "" "Fatal Installation Bug. File:\n" "'%s'\n" "could not be loaded\n" msgstr "" "重大安裝錯誤。檔案：\n" "\"%s\"\n" "無法載入\n" #: common/kiway.cpp:313 msgid "It is missing.\n" msgstr "該檔案缺失。\n" #: common/kiway.cpp:315 msgid "Perhaps a shared library (.dll or .so) file is missing.\n" msgstr "可能缺少共享庫檔案（.dll 或 .so）。\n" #: common/kiway.cpp:317 msgid "" "From command line: argv[0]:\n" "'" msgstr "" "從命令列：argv[0]:\n" "'" #: common/kiway.cpp:434 common/kiway.cpp:438 common/kiway.cpp:442 msgid "Error loading editor." msgstr "載入編輯器時出錯。" #: common/kiway.cpp:538 #, c-format msgid "Unable to switch language to %s" msgstr "無法將語言切換到 %s" #: common/languages_menu.cpp:48 msgid "Set Language" msgstr "設定語言" #: common/layer_id.cpp:104 pcbnew/plugins/kicad/pcb_parser.cpp:923 msgid "Rescue" msgstr "恢復" #: common/layer_id.cpp:108 msgid "Wires" msgstr "連線" #: common/layer_id.cpp:109 msgid "Buses" msgstr "匯流排" #: common/layer_id.cpp:110 msgid "Bus junctions" msgstr "匯流排結點" #: common/layer_id.cpp:111 msgid "Junctions" msgstr "結點" #: common/layer_id.cpp:112 msgid "Labels" msgstr "標籤" #: common/layer_id.cpp:113 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:45 msgid "Global labels" msgstr "全域性標籤" #: common/layer_id.cpp:114 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:48 msgid "Hierarchical labels" msgstr "分層標籤" #: common/layer_id.cpp:115 msgid "Pin numbers" msgstr "引腳編號" #: common/layer_id.cpp:116 msgid "Pin names" msgstr "引腳名" #: common/layer_id.cpp:117 msgid "Symbol references" msgstr "符號位號" #: common/layer_id.cpp:118 msgid "Symbol values" msgstr "符號值" #: common/layer_id.cpp:119 msgid "Symbol fields" msgstr "符號欄位" #: common/layer_id.cpp:120 msgid "Sheet references" msgstr "圖框參考" #: common/layer_id.cpp:121 msgid "Net class references" msgstr "網路類參考" #: common/layer_id.cpp:122 msgid "Symbol body outlines" msgstr "符號主體輪廓" #: common/layer_id.cpp:123 msgid "Symbol body fills" msgstr "符號主體填充" #: common/layer_id.cpp:124 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:72 msgid "Schematic text && graphics" msgstr "原理圖文字和圖形" #: common/layer_id.cpp:125 msgid "Symbol private text && graphics" msgstr "符號私有文字 && 圖形" #: common/layer_id.cpp:126 msgid "Schematic text && graphics backgrounds" msgstr "原理圖文字和圖形背景" #: common/layer_id.cpp:127 msgid "Pins" msgstr "引腳" #: common/layer_id.cpp:128 msgid "Sheet borders" msgstr "圖框邊框" #: common/layer_id.cpp:129 msgid "Sheet backgrounds" msgstr "圖框背景" #: common/layer_id.cpp:130 msgid "Sheet names" msgstr "圖框名稱" #: common/layer_id.cpp:131 msgid "Sheet fields" msgstr "圖框欄位" #: common/layer_id.cpp:132 msgid "Sheet file names" msgstr "圖框檔名" #: common/layer_id.cpp:133 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:63 msgid "Sheet pins" msgstr "圖紙頁碼" #: common/layer_id.cpp:134 msgid "No-connect symbols" msgstr "不連線符號" #: common/layer_id.cpp:135 msgid "ERC warnings" msgstr "ERC 警告" #: common/layer_id.cpp:136 msgid "ERC errors" msgstr "ERC 錯誤" #: common/layer_id.cpp:137 msgid "ERC exclusions" msgstr "ERC 排除" #: common/layer_id.cpp:138 common/layer_id.cpp:178 #: pcbnew/widgets/appearance_controls.cpp:351 msgid "Anchors" msgstr "錨點" #: common/layer_id.cpp:139 common/layer_id.cpp:182 msgid "Helper items" msgstr "輔助項" #: common/layer_id.cpp:140 common/layer_id.cpp:183 common/tool/grid_menu.cpp:64 #: gerbview/dialogs/panel_gerbview_color_settings.cpp:102 #: gerbview/widgets/gerbview_layer_widget.cpp:135 #: pcbnew/widgets/appearance_controls.cpp:354 msgid "Grid" msgstr "網格" #: common/layer_id.cpp:141 #: gerbview/dialogs/panel_gerbview_color_settings.cpp:103 msgid "Axes" msgstr "軸" #: common/layer_id.cpp:142 common/layer_id.cpp:185 #: gerbview/dialogs/panel_gerbview_color_settings.cpp:106 #: gerbview/widgets/gerbview_layer_widget.cpp:141 msgid "Background" msgstr "背景" #: common/layer_id.cpp:143 common/layer_id.cpp:181 #: eeschema/sim/sim_plot_frame.cpp:499 eeschema/sim/sim_plot_frame_base.cpp:174 msgid "Cursor" msgstr "游標" #: common/layer_id.cpp:144 msgid "Hovered items" msgstr "懸停專案" #: common/layer_id.cpp:145 msgid "Highlighted items" msgstr "高亮專案" #: common/layer_id.cpp:146 msgid "Hidden items" msgstr "隱藏專案" #: common/layer_id.cpp:147 common/layer_id.cpp:186 msgid "Selection highlight" msgstr "選擇高亮" #: common/layer_id.cpp:148 common/layer_id.cpp:179 msgid "Drawing sheet" msgstr "圖紙" #: common/layer_id.cpp:149 common/layer_id.cpp:180 msgid "Page limits" msgstr "圖框限制" #: common/layer_id.cpp:150 #, fuzzy msgid "Operating point voltages" msgstr "操作點" #: common/layer_id.cpp:151 #, fuzzy msgid "Operating point currents" msgstr "操作點" #: common/layer_id.cpp:155 msgid "Footprints front" msgstr "封裝正面" #: common/layer_id.cpp:156 msgid "Footprints back" msgstr "封裝背面" #: common/layer_id.cpp:157 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:30 #: eeschema/dialogs/dialog_update_from_pcb_base.cpp:64 #: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:110 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:31 #: pcbnew/widgets/appearance_controls.cpp:341 msgid "Values" msgstr "值" #: common/layer_id.cpp:158 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:27 #: eeschema/dialogs/dialog_update_from_pcb_base.cpp:53 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:28 msgid "Reference designators" msgstr "位號" #: common/layer_id.cpp:159 msgid "Footprint text" msgstr "封裝文字" #: common/layer_id.cpp:160 msgid "Hidden text" msgstr "隱藏文字" #: common/layer_id.cpp:161 msgid "SMD pads front" msgstr "SMD 焊盤正面" #: common/layer_id.cpp:162 msgid "SMD pads back" msgstr "SMD 焊盤背面" #: common/layer_id.cpp:163 msgid "Through-hole pads" msgstr "通孔焊盤" #: common/layer_id.cpp:164 #: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:27 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:52 #: pcbnew/widgets/appearance_controls.cpp:332 #: pcbnew/widgets/panel_selection_filter.cpp:188 #: pcbnew/widgets/panel_selection_filter_base.cpp:37 msgid "Tracks" msgstr "佈線" #: common/layer_id.cpp:165 msgid "Through vias" msgstr "通孔" #: common/layer_id.cpp:166 msgid "Blind/Buried vias" msgstr "盲孔/埋孔" #: common/layer_id.cpp:167 msgid "Micro-vias" msgstr "微孔" #: common/layer_id.cpp:168 msgid "Via holes" msgstr "過孔鑽孔" #: common/layer_id.cpp:169 msgid "Via hole walls" msgstr "過孔壁" #: common/layer_id.cpp:170 msgid "Plated holes" msgstr "鍍通孔" #: common/layer_id.cpp:171 msgid "Plated hole walls" msgstr "鍍通孔壁" #: common/layer_id.cpp:172 msgid "Non-plated holes" msgstr "無鍍銅孔" #: common/layer_id.cpp:173 pcbnew/dialogs/panel_edit_options_base.cpp:339 #: pcbnew/widgets/appearance_controls.cpp:347 #: pcbnew/widgets/appearance_controls.cpp:717 #: pcbnew/widgets/appearance_controls.cpp:2442 msgid "Ratsnest" msgstr "飛線" #: common/layer_id.cpp:174 msgid "DRC warnings" msgstr "DRC 警告" #: common/layer_id.cpp:175 msgid "DRC errors" msgstr "DRC 錯誤" #: common/layer_id.cpp:176 msgid "DRC exclusions" msgstr "DRC 排除" #: common/layer_id.cpp:177 msgid "DRC marker shadows" msgstr "DRC 標記陰影" #: common/layer_id.cpp:184 msgid "Grid axes" msgstr "網格軸" #: common/layer_id.cpp:187 msgid "Locked item shadow" msgstr "鎖定的專案陰影" #: common/layer_id.cpp:188 msgid "Courtyard collision shadow" msgstr "控制區域碰撞陰影" #: common/lib_id.cpp:144 msgid "Illegal character found in logical library name" msgstr "邏輯庫名稱中包含非法字元" #: common/lib_table_grid_tricks.cpp:45 msgid "Activate selected" msgstr "啟用所選" #: common/lib_table_grid_tricks.cpp:48 msgid "Deactivate selected" msgstr "停用所選" #: common/lib_tree_model.cpp:148 #: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:131 #: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:99 #: eeschema/dialogs/dialog_sim_model.cpp:493 eeschema/lib_item.cpp:58 #: eeschema/symbol_editor/symbol_editor.cpp:1259 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:67 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:78 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:89 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:100 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:113 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:124 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:177 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:188 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:201 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:212 #: pcbnew/dialogs/dialog_track_via_properties_base.cpp:223 msgid "Unit" msgstr "單位" #: common/libeval_compiler/libeval_compiler.cpp:569 #, c-format msgid "Unrecognized character '%c'" msgstr "無法識別的字元 '%c'" #: common/libeval_compiler/libeval_compiler.cpp:830 msgid "Unknown parent of function parameters" msgstr "函式引數的父級未知" #: common/libeval_compiler/libeval_compiler.cpp:849 msgid "Unknown parent of property" msgstr "屬性的未知父級" #: common/libeval_compiler/libeval_compiler.cpp:872 #: common/libeval_compiler/libeval_compiler.cpp:902 #: common/libeval_compiler/libeval_compiler.cpp:976 #: common/libeval_compiler/libeval_compiler.cpp:1049 #, c-format msgid "Unrecognized item '%s'" msgstr "無法識別的專案 '%s'" #: common/libeval_compiler/libeval_compiler.cpp:878 #: common/libeval_compiler/libeval_compiler.cpp:981 #, c-format msgid "Unrecognized property '%s'" msgstr "無法識別的屬性 '%s'" #: common/libeval_compiler/libeval_compiler.cpp:915 #, c-format msgid "Unrecognized function '%s'" msgstr "無法識別的函式 '%s'" #: common/libeval_compiler/libeval_compiler.cpp:1008 #, c-format msgid "Unexpected units for '%s'" msgstr "意料之外的 '%s' 單元" #: common/libeval_compiler/libeval_compiler.cpp:1020 #, c-format msgid "Missing units for '%s'| (%s)" msgstr "缺失 '%s' | (%s) 的單位" #: common/libeval_compiler/libeval_compiler.cpp:1140 #, c-format msgid "Type mismatch between '%s' and %lf" msgstr "'%s' 和 %lf 的型別不匹配" #: common/libeval_compiler/libeval_compiler.cpp:1146 #, c-format msgid "Type mismatch between %lf and '%s'" msgstr "%lf 和 '%s'的型別不匹配" #: common/pgm_base.cpp:197 msgid "No default editor found, you must choose one." msgstr "未找到預設編輯器，你必須先選擇一個。" #: common/pgm_base.cpp:217 common/pgm_base.cpp:219 msgid "Executable file" msgstr "可執行檔案" #: common/pgm_base.cpp:229 msgid "Select Preferred Editor" msgstr "選擇首選編輯器" #: common/pgm_base.cpp:356 msgid "" "KiCad can anonymously report crashes and special event data to developers in " "order to aid identifying critical bugs across the user base more effectively " "and help profile functionality to guide improvements. \n" "If you choose to voluntarily participate, KiCad will automatically handle " "sending said reports when crashes or events occur. \n" "Your design files such as schematic or PCB are not shared in this process." msgstr "" "KiCad 可以匿名地向開發人員報告崩潰和特殊事件資料，以幫助更有效地識別整個使用" "者群中的關鍵 bug，並幫助繪製功能畫像來指導改進。\n" "如果您選擇自願參與，那麼發生崩潰或事件時，KiCad 將自動處理傳送上述報告。\n" "您的設計檔案，如原理圖或 PCB 在此過程中不會被共享。" #: common/pgm_base.cpp:363 msgid "Data collection opt in request" msgstr "資料收集自願加入請求" #: common/pgm_base.cpp:435 msgid "Environment variable HOME is empty. Unable to continue." msgstr "環境變數 HOME 為空。無法繼續。" #: common/pgm_base.cpp:662 msgid "This language is not supported by the operating system." msgstr "作業系統不支援此語言。" #: common/pgm_base.cpp:713 common/pgm_base.cpp:754 msgid "The KiCad language file for this language is not installed." msgstr "未安裝此語言的 KiCad 語言檔案。" #: common/plotters/PDF_plotter.cpp:826 #, c-format msgid "Page %s" msgstr "第 %s 頁" #: common/plotters/PDF_plotter.cpp:830 #, c-format msgid "%s (Page %s)" msgstr "%s (第 %s 頁)" #: common/plotters/PDF_plotter.cpp:1196 #, c-format msgid "Show Page %s" msgstr "顯示頁面 %s" #: common/plotters/PDF_plotter.cpp:1207 #: eeschema/symbol_editor/symbol_edit_frame.cpp:805 #: eeschema/tools/sch_navigate_tool.cpp:86 #, c-format msgid "Open %s" msgstr "開啟 %s" #: common/plugins/altium/altium_parser.cpp:55 #, c-format msgid "Cannot open file '%s'." msgstr "無法開啟檔案 '%s'。" #: common/plugins/altium/altium_parser.cpp:64 msgid "Error reading file: cannot determine length." msgstr "讀取檔案時出錯：無法確定長度。" #: common/plugins/altium/altium_parser.cpp:77 msgid "Error reading file." msgstr "讀取檔案時出錯。" #: common/plugins/altium/altium_parser.cpp:192 msgid "" "Missing null byte at end of property list. Imported data might be malformed " "or missing." msgstr "屬性列表末尾缺少空位元組。匯入的資料可能格式不正確或缺失。" #: common/plugins/altium/altium_parser.cpp:313 #, c-format msgid "Unit '%s' does not end with 'mil'." msgstr "單元 \"%s\" 未以 'mil' 結尾。" #: common/plugins/altium/altium_parser.cpp:321 #, c-format msgid "Cannot convert '%s' to double." msgstr "無法轉換 '%s' 到雙位。" #: common/plugins/cadstar/cadstar_archive_parser.cpp:2434 #, c-format msgid "Cannot open file '%s'" msgstr "無法開啟檔案 ‘%s’" #: common/plugins/cadstar/cadstar_archive_parser.cpp:2454 #: common/plugins/cadstar/cadstar_archive_parser.cpp:2751 msgid "File import cancelled by user." msgstr "使用者取消了檔案匯入。" #: common/plugins/cadstar/cadstar_archive_parser.cpp:2470 #: common/plugins/cadstar/cadstar_archive_parser.cpp:2488 #: common/plugins/cadstar/cadstar_archive_parser.cpp:2504 #: common/plugins/cadstar/cadstar_archive_parser.cpp:2510 #: common/plugins/cadstar/cadstar_archive_parser.cpp:2516 msgid "The selected file is not valid or might be corrupt!" msgstr "所選檔案無效或可能已損壞！" #: common/plugins/cadstar/cadstar_archive_parser.cpp:2615 #, c-format msgid "Unexpected number of points in '%s'. Found %d but expected %d." msgstr "'%s' 中的意外點數。找到 %d，但需要 %d。" #: common/plugins/cadstar/cadstar_archive_parser.h:42 #, c-format msgid "Missing node '%s' in '%s'" msgstr "缺少節點 '%s' (在 '%s' 中)" #: common/plugins/cadstar/cadstar_archive_parser.h:45 #, c-format msgid "Unknown node '%s' in '%s'" msgstr "未知節點 '%s' (在 '%s' 中)" #: common/plugins/cadstar/cadstar_archive_parser.h:48 #, c-format msgid "Missing Parameter '%s' in '%s'" msgstr "缺少引數 '%s' (在 '%s' 中)" #: common/plugins/cadstar/cadstar_archive_parser.h:51 #, c-format msgid "Unknown Parameter '%s' in '%s'" msgstr "未知引數 '%s' (在 '%s' 中)" #: common/plugins/cadstar/cadstar_archive_parser.h:54 #, c-format msgid "Unable to parse '%s' in '%s'" msgstr "無法分析 '%s' (在 '%s' 中)" #: common/plugins/eagle/eagle_parser.cpp:211 #, c-format msgid "Invalid size %lld: too large" msgstr "無效的大小 %lld: 太大" #: common/plugins/eagle/eagle_parser.cpp:372 #, c-format msgid "Invalid Arc with radius %f and angle %f" msgstr "半徑為 %f 且角度為 %f 的無效圓弧" #: common/project.cpp:351 common/project.cpp:356 pcbnew/pcb_base_frame.cpp:199 msgid "Error loading project footprint library table." msgstr "載入工程封裝庫表時出錯。" #: common/project/net_settings.cpp:61 pcbnew/board.cpp:108 msgid "This is the default net class." msgstr "這是預設網路類。" #: common/project/project_archiver.cpp:52 kicad/pcm/pcm_task_manager.cpp:330 msgid "Could not open archive file." msgstr "無法開啟歸檔檔案。" #: common/project/project_archiver.cpp:61 kicad/pcm/pcm_task_manager.cpp:338 msgid "Invalid archive file format." msgstr "無效的壓縮檔案格式。" #: common/project/project_archiver.cpp:72 #, c-format msgid "Extracting file '%s'." msgstr "正在提取檔案 \"%s\"。" #: common/project/project_archiver.cpp:95 kicad/pcm/pcm_task_manager.cpp:250 #: kicad/pcm/pcm_task_manager.cpp:295 msgid "Error extracting file!" msgstr "解壓檔案時出錯！" #: common/project/project_archiver.cpp:160 eeschema/dialogs/dialog_erc.cpp:981 #: eeschema/netlist_exporters/netlist_exporter_cadstar.cpp:48 #: eeschema/netlist_exporters/netlist_exporter_orcadpcb2.cpp:52 #: eeschema/sch_plotter.cpp:165 eeschema/sch_plotter.cpp:376 #: eeschema/sch_plotter.cpp:520 eeschema/sch_plotter.cpp:731 #: eeschema/sch_plotter.cpp:904 gerbview/export_to_pcbnew.cpp:68 #: pagelayout_editor/files.cpp:212 pcbnew/build_BOM_from_board.cpp:101 #: pcbnew/dialogs/dialog_board_statistics.cpp:656 #: pcbnew/dialogs/dialog_drc.cpp:874 pcbnew/dialogs/dialog_export_idf.cpp:223 #: pcbnew/dialogs/dialog_export_svg.cpp:315 #: pcbnew/dialogs/dialog_export_vrml.cpp:266 #: pcbnew/dialogs/dialog_gen_footprint_position.cpp:297 #: pcbnew/dialogs/dialog_gen_footprint_position.cpp:318 #: pcbnew/dialogs/dialog_gen_footprint_position.cpp:426 #: pcbnew/dialogs/dialog_gen_footprint_position.cpp:472 #: pcbnew/dialogs/dialog_gen_footprint_position.cpp:574 #: pcbnew/dialogs/dialog_gendrill.cpp:482 pcbnew/dialogs/dialog_plot.cpp:1120 #: pcbnew/exporters/export_footprint_associations.cpp:83 #: pcbnew/exporters/export_gencad.cpp:257 #: pcbnew/exporters/gendrill_Excellon_writer.cpp:117 #: pcbnew/exporters/gendrill_file_writer_base.cpp:336 #: pcbnew/exporters/gendrill_gerber_writer.cpp:101 #: pcbnew/exporters/gerber_jobfile_writer.cpp:153 #, c-format msgid "Failed to create file '%s'." msgstr "建立檔案 \"%s\" 失敗。" #: common/project/project_archiver.cpp:219 #, c-format msgid "Archived file '%s'." msgstr "已存檔檔案 \"%s\"。" #: common/project/project_archiver.cpp:229 #, c-format msgid "Failed to archive file '%s'." msgstr "未能存檔檔案 \"%s\"。" #: common/project/project_archiver.cpp:255 #, c-format msgid "Zip archive '%s' created (%s uncompressed, %s compressed)." msgstr "已建立 Zip 壓縮包 \"%s\" (%s 未壓縮，%s 已壓縮)。" #: common/rc_item.cpp:350 eeschema/erc_item.cpp:304 msgid "Excluded warning: " msgstr "排除的警告： " #: common/rc_item.cpp:352 eeschema/erc_item.cpp:306 msgid "Excluded error: " msgstr "排除的錯誤： " #: common/rc_item.cpp:356 eeschema/erc_item.cpp:310 msgid "Warning: " msgstr "警告： " #: common/rc_item.cpp:360 eeschema/erc_item.cpp:314 msgid "Error: " msgstr "錯誤： " #: common/richio.cpp:175 #, c-format msgid "Unable to open %s for reading." msgstr "無法開啟 %s 進行讀取。" #: common/richio.cpp:226 common/richio.cpp:324 msgid "Maximum line length exceeded" msgstr "超出了最大行長度" #: common/richio.cpp:289 msgid "Line length exceeded" msgstr "超出了最大行長度" #: common/richio.cpp:573 msgid "OUTPUTSTREAM_OUTPUTFORMATTER write error" msgstr "OUTPUTSTREAM_OUTPUTFORMATTER 寫入錯誤" #: common/settings/color_settings.cpp:332 msgid "(Footprints)" msgstr "(封裝)" #: common/settings/color_settings.cpp:384 #: pagelayout_editor/dialogs/panel_pl_editor_color_settings.cpp:78 msgid "KiCad Default" msgstr "KiCad 預設" #: common/settings/color_settings.cpp:389 msgid "KiCad Classic" msgstr "KiCad 經典版" #: common/template_fieldnames.cpp:59 #, c-format msgid "Field%d" msgstr "欄位 %d" #: common/tool/action_menu.cpp:208 common/tool/action_menu.cpp:213 #, c-format msgid "Close %s" msgstr "關閉 %s" #: common/tool/action_menu.cpp:227 #, c-format msgid "Quit %s" msgstr "退出 %s" #: common/tool/actions.cpp:43 msgid "New..." msgstr "新建..." #: common/tool/actions.cpp:43 msgid "Create a new document in the editor" msgstr "在編輯器中建立新文件" #: common/tool/actions.cpp:49 eeschema/symbol_editor/symbol_editor.cpp:586 #: pcbnew/footprint_libraries_utils.cpp:1089 msgid "New Library..." msgstr "新建庫..." #: common/tool/actions.cpp:49 msgid "Create a new library folder" msgstr "建立新的庫資料夾" #: common/tool/actions.cpp:55 msgid "Add Library..." msgstr "新增庫..." #: common/tool/actions.cpp:55 msgid "Add an existing library folder" msgstr "新增現有庫資料夾" #: common/tool/actions.cpp:61 msgid "Open existing document" msgstr "開啟現有文件" #: common/tool/actions.cpp:67 msgid "Save changes" msgstr "儲存變更" #: common/tool/actions.cpp:73 eeschema/tools/ee_actions.cpp:147 msgid "Save As..." msgstr "另存為..." #: common/tool/actions.cpp:73 msgid "Save current document to another location" msgstr "將當前文件儲存到其他位置" #: common/tool/actions.cpp:79 msgid "Save a Copy..." msgstr "儲存副本…" #: common/tool/actions.cpp:79 msgid "Save a copy of the current document to another location" msgstr "將當前文件的副本儲存到其他位置" #: common/tool/actions.cpp:85 msgid "Save All" msgstr "儲存所有" #: common/tool/actions.cpp:85 msgid "Save all changes" msgstr "儲存所有變更" #: common/tool/actions.cpp:91 msgid "Throw away changes" msgstr "放棄變更" #: common/tool/actions.cpp:96 msgid "Page Settings..." msgstr "圖框設定..." #: common/tool/actions.cpp:96 msgid "Settings for paper size and title block info" msgstr "圖框大小和標題塊資訊的設定" #: common/tool/actions.cpp:102 msgid "Print..." msgstr "列印..." #: common/tool/actions.cpp:108 msgid "Plot..." msgstr "繪製..." #: common/tool/actions.cpp:108 eeschema/sim/sim_plot_frame.cpp:494 #: eeschema/sim/sim_plot_frame_base.cpp:119 pcbnew/dialogs/dialog_plot.cpp:179 #: pcbnew/dialogs/dialog_plot_base.h:157 msgid "Plot" msgstr "繪製" #: common/tool/actions.cpp:114 msgid "Close the current editor" msgstr "關閉當前編輯器" #: common/tool/actions.cpp:121 msgid "Cancel current tool" msgstr "取消當前工具" #: common/tool/actions.cpp:127 msgid "Show Context Menu" msgstr "顯示上下文選單" #: common/tool/actions.cpp:127 msgid "Perform the right-mouse-button action" msgstr "執行滑鼠右鍵操作" #: common/tool/actions.cpp:136 pcbnew/dialogs/panel_setup_rules.cpp:108 msgid "Undo" msgstr "撤消" #: common/tool/actions.cpp:136 msgid "Undo last edit" msgstr "撤消上次編輯" #: common/tool/actions.cpp:147 pcbnew/dialogs/panel_setup_rules.cpp:109 msgid "Redo" msgstr "重做" #: common/tool/actions.cpp:147 msgid "Redo last edit" msgstr "重做上一次編輯" #: common/tool/actions.cpp:153 msgid "Cut selected item(s) to clipboard" msgstr "將所選專案剪下到剪貼簿" #: common/tool/actions.cpp:159 msgid "Copy selected item(s) to clipboard" msgstr "將所選專案複製到剪貼簿" #: common/tool/actions.cpp:165 msgid "Paste item(s) from clipboard" msgstr "從剪貼簿貼上專案" #: common/tool/actions.cpp:171 msgid "Select all items on screen" msgstr "選擇螢幕上的所有專案" #: common/tool/actions.cpp:175 msgid "Paste Special..." msgstr "特殊貼上..." #: common/tool/actions.cpp:175 msgid "Paste item(s) from clipboard with annotation options" msgstr "使用註釋選項從剪貼簿貼上專案" #: common/tool/actions.cpp:181 msgid "Duplicate" msgstr "建立副本" #: common/tool/actions.cpp:181 msgid "Duplicates the selected item(s)" msgstr "建立所選項的副本" #: common/tool/actions.cpp:192 msgid "Deletes selected item(s)" msgstr "刪除選擇項" #: common/tool/actions.cpp:197 msgid "Interactive Delete Tool" msgstr "互動式刪除工具" #: common/tool/actions.cpp:197 msgid "Delete clicked items" msgstr "刪除單擊的專案" #: common/tool/actions.cpp:204 msgid "Cycle arc editing mode" msgstr "迴圈圓弧編輯模式" #: common/tool/actions.cpp:205 msgid "Switch to a different method of editing arcs" msgstr "切換到另一種編輯圓弧的方法" #: common/tool/actions.cpp:210 msgid "Show Search Panel" msgstr "顯示搜尋面板" #: common/tool/actions.cpp:210 msgid "Show/hide the search panel" msgstr "顯示/隱藏搜尋面板" #: common/tool/actions.cpp:216 eeschema/dialogs/dialog_schematic_find.cpp:33 #: eeschema/dialogs/dialog_schematic_find_base.h:82 #: pcbnew/dialogs/dialog_find.cpp:56 msgid "Find" msgstr "查詢" #: common/tool/actions.cpp:216 msgid "Find text" msgstr "查詢文字" #: common/tool/actions.cpp:222 eeschema/dialogs/dialog_schematic_find.cpp:44 msgid "Find and Replace" msgstr "查詢和替換" #: common/tool/actions.cpp:222 msgid "Find and replace text" msgstr "查詢和替換文字" #: common/tool/actions.cpp:228 pcbnew/dialogs/dialog_find_base.cpp:91 msgid "Find Next" msgstr "查詢下一項" #: common/tool/actions.cpp:228 msgid "Find next match" msgstr "查詢下一個匹配項" #: common/tool/actions.cpp:234 pcbnew/dialogs/dialog_find_base.cpp:96 msgid "Find Previous" msgstr "查詢預覽" #: common/tool/actions.cpp:234 #, fuzzy msgid "Find previous match" msgstr "查詢預覽" #: common/tool/actions.cpp:240 msgid "Find Next Marker" msgstr "查詢下一項標記" #: common/tool/actions.cpp:246 msgid "Replace and Find Next" msgstr "替換並查詢下一項" #: common/tool/actions.cpp:246 msgid "Replace current match and find next" msgstr "替換當前匹配項並查詢下一個" #: common/tool/actions.cpp:252 msgid "Replace All" msgstr "全部替換" #: common/tool/actions.cpp:252 msgid "Replace all matches" msgstr "替換所有匹配項" #: common/tool/actions.cpp:263 msgid "Previous Marker" msgstr "上個標記" #: common/tool/actions.cpp:263 msgid "Go to previous marker in Checker window" msgstr "轉到檢查器視窗的上個標記" #: common/tool/actions.cpp:269 msgid "Next Marker" msgstr "下個標記" #: common/tool/actions.cpp:269 msgid "Go to next marker in Checker window" msgstr "轉到檢查器視窗的下個標記" #: common/tool/actions.cpp:275 msgid "Exclude Marker" msgstr "排除標記" #: common/tool/actions.cpp:275 msgid "Mark current violation in Checker window as an exclusion" msgstr "在檢查器視窗中將當前違規標記為排除項" #: common/tool/actions.cpp:287 kicad/pcm/dialogs/dialog_pcm_base.cpp:131 msgid "Refresh" msgstr "重新整理" #: common/tool/actions.cpp:298 msgid "Zoom to Fit" msgstr "縮放以適應" #: common/tool/actions.cpp:303 msgid "Zoom to Objects" msgstr "縮放至物件" #: common/tool/actions.cpp:314 msgid "Zoom In at Cursor" msgstr "在游標處放大" #: common/tool/actions.cpp:325 msgid "Zoom Out at Cursor" msgstr "在游標處縮小" #: common/tool/actions.cpp:331 common/widgets/mathplot.cpp:1683 #: pcbnew/dialogs/panel_setup_rules.cpp:124 msgid "Zoom In" msgstr "放大" #: common/tool/actions.cpp:337 common/widgets/mathplot.cpp:1684 #: pcbnew/dialogs/panel_setup_rules.cpp:125 msgid "Zoom Out" msgstr "縮小" #: common/tool/actions.cpp:343 common/widgets/mathplot.cpp:1681 msgid "Center on Cursor" msgstr "以游標為中心" #: common/tool/actions.cpp:349 msgid "Zoom to Selection" msgstr "縮放至選區大小" #: common/tool/actions.cpp:362 msgid "Cursor Up" msgstr "向上游標" #: common/tool/actions.cpp:368 msgid "Cursor Down" msgstr "向下游標" #: common/tool/actions.cpp:374 msgid "Cursor Left" msgstr "向左游標" #: common/tool/actions.cpp:380 msgid "Cursor Right" msgstr "向右游標" #: common/tool/actions.cpp:387 msgid "Cursor Up Fast" msgstr "快速向上游標" #: common/tool/actions.cpp:393 msgid "Cursor Down Fast" msgstr "快速向下游標" #: common/tool/actions.cpp:399 msgid "Cursor Left Fast" msgstr "快速向左游標" #: common/tool/actions.cpp:405 msgid "Cursor Right Fast" msgstr "快速向右游標" #: common/tool/actions.cpp:411 msgid "Click" msgstr "單擊" #: common/tool/actions.cpp:411 msgid "Performs left mouse button click" msgstr "執行滑鼠左鍵單擊" #: common/tool/actions.cpp:417 msgid "Double-click" msgstr "雙擊" #: common/tool/actions.cpp:417 msgid "Performs left mouse button double-click" msgstr "執行滑鼠左鍵雙擊" #: common/tool/actions.cpp:425 msgid "Pin Library" msgstr "置頂庫" #: common/tool/actions.cpp:426 msgid "Keep the library at the top of the list" msgstr "將庫保持在列表頂部" #: common/tool/actions.cpp:430 msgid "Unpin Library" msgstr "取消置頂庫" #: common/tool/actions.cpp:431 msgid "No longer keep the library at the top of the list" msgstr "不再將庫保持在列表頂部" #: common/tool/actions.cpp:436 msgid "Pan Up" msgstr "向上平移" #: common/tool/actions.cpp:442 msgid "Pan Down" msgstr "向下平移" #: common/tool/actions.cpp:448 msgid "Pan Left" msgstr "向左平移" #: common/tool/actions.cpp:454 msgid "Pan Right" msgstr "向右平移" #: common/tool/actions.cpp:461 msgid "Switch to Fast Grid 1" msgstr "切換到快速網格 1" #: common/tool/actions.cpp:466 msgid "Switch to Fast Grid 2" msgstr "切換到快速網格 2" #: common/tool/actions.cpp:471 msgid "Switch to Next Grid" msgstr "切換到下一個網格" #: common/tool/actions.cpp:475 msgid "Switch to Previous Grid" msgstr "切換到上一個網格" #: common/tool/actions.cpp:480 msgid "Set the grid origin point" msgstr "設定網格原點" #: common/tool/actions.cpp:493 msgid "Show Grid" msgstr "顯示網格" #: common/tool/actions.cpp:493 msgid "Display background grid in the edit window" msgstr "在編輯視窗中顯示背景網格" #: common/tool/actions.cpp:498 msgid "Grid Properties..." msgstr "網格屬性..." #: common/tool/actions.cpp:498 msgid "Set grid dimensions" msgstr "設定網格尺寸" #: common/tool/actions.cpp:503 msgid "Use inches" msgstr "使用 inch 作為單位" #: common/tool/actions.cpp:508 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122 #: pcbnew/dialogs/dialog_export_idf_base.cpp:102 #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:91 #: pcbnew/import_gfx/dialog_import_gfx.cpp:51 msgid "Mils" msgstr "密爾" #: common/tool/actions.cpp:508 msgid "Use mils" msgstr "使用 mil 作為單位" #: common/tool/actions.cpp:513 #: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122 #: pcbnew/dialogs/dialog_export_idf_base.cpp:102 #: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:55 #: pcbnew/dialogs/dialog_gendrill_base.cpp:106 #: pcbnew/dialogs/dialog_plot_base.cpp:350 #: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:91 #: pcbnew/import_gfx/dialog_import_gfx.cpp:50 msgid "Millimeters" msgstr "毫米" #: common/tool/actions.cpp:513 msgid "Use millimeters" msgstr "使用 mm 作為單位" #: common/tool/actions.cpp:524 common/widgets/lib_tree.cpp:700 msgid "Select Columns" msgstr "選擇列" #: common/tool/actions.cpp:529 msgid "Switch units" msgstr "切換單位" #: common/tool/actions.cpp:529 msgid "Switch between imperial and metric units" msgstr "在英制單位和公制單位之間切換" #: common/tool/actions.cpp:534 msgid "Polar Coordinates" msgstr "極座標" #: common/tool/actions.cpp:534 msgid "Switch between polar and cartesian coordinate systems" msgstr "在極座標系和笛卡爾座標系之間切換" #: common/tool/actions.cpp:540 msgid "Reset Local Coordinates" msgstr "重置區域性座標" #: common/tool/actions.cpp:546 msgid "Always Show Cursor" msgstr "始終顯示游標" #: common/tool/actions.cpp:546 msgid "Display crosshairs even in selection tool" msgstr "即使在選擇工具中也顯示十字線" #: common/tool/actions.cpp:551 msgid "Full-Window Crosshairs" msgstr "全屏十字游標" #: common/tool/actions.cpp:551 msgid "Switch display of full-window crosshairs" msgstr "切換全屏十字游標" #: common/tool/actions.cpp:557 msgid "Inactive Layer View Mode" msgstr "非活動圖層檢視模式" #: common/tool/actions.cpp:558 msgid "Toggle inactive layers between normal and dimmed" msgstr "在正常和暗顯之間切換非活動圖層" #: common/tool/actions.cpp:564 msgid "Inactive Layer View Mode (3-state)" msgstr "非活動圖層檢視模式 (三態)" #: common/tool/actions.cpp:565 msgid "Cycle inactive layers between normal, dimmed, and hidden" msgstr "在正常、暗顯和隱藏三種狀態之間迴圈非活動圖層" #: common/tool/actions.cpp:570 msgid "Draw Bounding Boxes" msgstr "繪製邊界框" #: common/tool/actions.cpp:575 msgid "Select item(s)" msgstr "選擇專案" #: common/tool/actions.cpp:582 msgid "Measure Tool" msgstr "測量工具" #: common/tool/actions.cpp:582 msgid "Interactively measure distance between points" msgstr "互動測量點之間的距離" #: common/tool/actions.cpp:596 msgid "Show 3D viewer window" msgstr "顯示 3D 檢視器視窗" #: common/tool/actions.cpp:601 eeschema/symbol_viewer_frame.cpp:110 #: eeschema/symbol_viewer_frame.cpp:1299 msgid "Symbol Library Browser" msgstr "符號庫瀏覽器" #: common/tool/actions.cpp:601 msgid "Browse symbol libraries" msgstr "瀏覽符號庫" #: common/tool/actions.cpp:606 msgid "Create, delete and edit symbols" msgstr "建立，刪除和編輯符號" #: common/tool/actions.cpp:611 pcbnew/footprint_viewer_frame.cpp:114 #: pcbnew/footprint_viewer_frame.cpp:1201 msgid "Footprint Library Browser" msgstr "瀏覽封裝庫" #: common/tool/actions.cpp:611 msgid "Browse footprint libraries" msgstr "瀏覽封裝庫" #: common/tool/actions.cpp:616 msgid "Create, delete and edit footprints" msgstr "建立，刪除和編輯封裝" #: common/tool/actions.cpp:622 msgid "Update PCB from Schematic..." msgstr "從原理圖更新 PCB..." #: common/tool/actions.cpp:622 msgid "Update PCB with changes made to schematic" msgstr "根據原理圖的變化更新 PCB" #: common/tool/actions.cpp:627 msgid "Update Schematic from PCB..." msgstr "從 PCB 更新原理圖..." #: common/tool/actions.cpp:627 msgid "Update schematic with changes made to PCB" msgstr "根據 PCB 的變化更新原理圖" #: common/tool/actions.cpp:637 #: pcbnew/dialogs/panel_fp_properties_3d_model_base.cpp:69 msgid "Configure Paths..." msgstr "配置路徑..." #: common/tool/actions.cpp:637 msgid "Edit path configuration environment variables" msgstr "編輯路徑環境變數配置" #: common/tool/actions.cpp:642 msgid "Manage Symbol Libraries..." msgstr "管理符號庫..." #: common/tool/actions.cpp:643 msgid "Edit the global and project symbol library lists" msgstr "編輯全域性和工程符號庫表" #: common/tool/actions.cpp:648 msgid "Manage Footprint Libraries..." msgstr "管理封裝庫..." #: common/tool/actions.cpp:649 msgid "Edit the global and project footprint library lists" msgstr "編輯全域性和工程封裝庫列表" #: common/tool/actions.cpp:654 msgid "Getting Started with KiCad" msgstr "KiCad 入門" #: common/tool/actions.cpp:655 msgid "Open \"Getting Started in KiCad\" guide for beginners" msgstr "開啟“KiCad 入門”手冊" #: common/tool/actions.cpp:660 #: pagelayout_editor/dialogs/properties_frame_base.cpp:35 #: pcb_calculator/calculator_panels/panel_eseries_base.cpp:187 #: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:136 msgid "Help" msgstr "幫助" #: common/tool/actions.cpp:661 msgid "Open product documentation in a web browser" msgstr "在 Web 瀏覽器中開啟產品文件" #: common/tool/actions.cpp:667 msgid "List Hotkeys..." msgstr "快捷鍵列表..." #: common/tool/actions.cpp:668 msgid "Displays current hotkeys table and corresponding commands" msgstr "顯示當前快捷鍵表和相應命令" #: common/tool/actions.cpp:673 msgid "Get Involved" msgstr "參與 KiCad" #: common/tool/actions.cpp:674 msgid "Open \"Contribute to KiCad\" in a web browser" msgstr "在 Web 瀏覽器中開啟“參與 KiCad”" #: common/tool/actions.cpp:680 msgid "Open \"Donate to KiCad\" in a web browser" msgstr "在 Web 瀏覽器中開啟“向 KiCad 捐款”" #: common/tool/actions.cpp:684 msgid "Report Bug" msgstr "報告 Bug" #: common/tool/common_control.cpp:210 #, c-format msgid "" "Help file '%s' or\n" "'%s' could not be found.\n" "Do you want to access the KiCad online help?" msgstr "" "找不到幫助檔案 \"%s\"\n" "或“%s” 。\n" "你想訪問 KiCad 聯機幫助嗎？" #: common/tool/common_control.cpp:213 common/tool/common_control.cpp:233 msgid "File Not Found" msgstr "檔案未找到" #: common/tool/common_control.cpp:230 #, c-format msgid "" "Help file '%s' could not be found.\n" "Do you want to access the KiCad online help?" msgstr "" "無法找到幫助檔案 \"%s\" 。\n" "是否要訪問 KiCad 聯機幫助?" #: common/tool/common_control.cpp:260 #, c-format msgid "" "Could not launch the default browser.\n" "For information on how to help the KiCad project, visit %s" msgstr "" "無法啟動預設瀏覽器。\n" "有關如何幫助 KiCad 專案的資訊，請訪問 %s" #: common/tool/common_control.cpp:263 msgid "Get involved with KiCad" msgstr "參與 KiCad" #: common/tool/common_control.cpp:275 #, c-format msgid "" "Could not launch the default browser.\n" "To donate to the KiCad project, visit %s" msgstr "" "無法啟動預設瀏覽器。\n" "有關如何向 KiCad 專案捐款，請訪問 %s" #: common/tool/grid_menu.cpp:100 #, c-format msgid "Grid: %s (%s)" msgstr "網格：%s (%s)" #: common/tool/grid_menu.cpp:112 #, c-format msgid "User grid: %s (%s)" msgstr "使用者網格： %s (%s)" #: common/tool/selection_tool.cpp:294 msgid "Select &All\tA" msgstr "全選 (&A)\tA" #: common/tool/selection_tool.cpp:297 msgid "&Expand Selection\tE" msgstr "展開選定內容 (&E)\tE" #: common/tool/zoom_menu.cpp:67 #, c-format msgid "Zoom: %.2f" msgstr "倍數：%.2f" #: common/validators.cpp:250 #, c-format msgid "Incorrect value: %s" msgstr "不正確的值：%s" #: common/validators.cpp:294 msgid "Entry contains trailing white space." msgstr "條目包含尾隨空格。" #: common/validators.cpp:298 msgid "Entry contains leading white space." msgstr "條目包含前導空格。" #: common/validators.cpp:302 #, c-format msgid "'%s' is not a valid library identifier format." msgstr "'%s' 不是一個有效的庫識別符號格式。" #: common/validators.cpp:309 msgid "Library Identifier Validation Error" msgstr "庫識別符號驗證錯誤" #: common/validators.cpp:356 msgid "Invalid signal name" msgstr "無效的訊號名稱" #: common/validators.cpp:367 msgid "Signal names cannot contain CR or LF characters" msgstr "訊號名稱不能包含 CR 或 LF 字元" #: common/validators.cpp:370 msgid "Signal names cannot contain spaces" msgstr "訊號名稱不能包含空格" #: common/view/view.cpp:540 msgid "Mirroring for Y axis is not supported yet" msgstr "Y 軸的映象尚不支援" #: common/widgets/font_choice.cpp:58 msgid "" msgstr "<未找到>" #: common/widgets/footprint_preview_widget.cpp:109 msgid "Footprint not found." msgstr "找不到封裝。" #: common/widgets/footprint_select_widget.cpp:141 msgid "No default footprint" msgstr "沒有預設的封裝" #: common/widgets/gal_options_panel.cpp:87 msgid "Accelerated graphics" msgstr "硬體加速圖形" #: common/widgets/gal_options_panel.cpp:87 msgid "Fallback graphics" msgstr "備用圖形" #: common/widgets/gal_options_panel.cpp:88 msgid "Rendering Engine" msgstr "渲染引擎" #: common/widgets/gal_options_panel.cpp:92 msgid "Hardware-accelerated graphics (recommended)" msgstr "硬體加速圖形 (推薦)" #: common/widgets/gal_options_panel.cpp:93 msgid "" "Software graphics (for computers which do not support KiCad's hardware " "acceleration requirements)" msgstr "軟體圖形 (適用於不支援 KiCad 硬體加速要求的計算機)" #: common/widgets/gal_options_panel.cpp:105 msgid "Grid Options" msgstr "網格選項" #: common/widgets/gal_options_panel.cpp:115 msgid "Dots" msgstr "點" #: common/widgets/gal_options_panel.cpp:116 msgid "Lines" msgstr "線" #: common/widgets/gal_options_panel.cpp:117 msgid "Small crosses" msgstr "小十字" #: common/widgets/gal_options_panel.cpp:121 msgid "Grid Style" msgstr "網格樣式" #: common/widgets/gal_options_panel.cpp:132 msgid "Grid thickness:" msgstr "網格粗細：" #: common/widgets/gal_options_panel.cpp:142 #: common/widgets/gal_options_panel.cpp:156 #: common/widgets/gal_options_panel.cpp:172 msgid "px" msgstr "畫素" #: common/widgets/gal_options_panel.cpp:146 msgid "Min grid spacing:" msgstr "最小網格間距：" #: common/widgets/gal_options_panel.cpp:160 msgid "Snap to Grid:" msgstr "對齊網格：" #: common/widgets/gal_options_panel.cpp:164 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:357 #: pcbnew/dialogs/panel_edit_options_base.cpp:296 #: pcbnew/dialogs/panel_edit_options_base.cpp:310 #: pcbnew/dialogs/panel_edit_options_base.cpp:324 msgid "Always" msgstr "總是" #: common/widgets/gal_options_panel.cpp:164 msgid "When grid shown" msgstr "當網格顯示時" #: common/widgets/gal_options_panel.cpp:164 #: pcbnew/dialogs/dialog_copper_zones_base.cpp:357 #: pcbnew/dialogs/panel_edit_options_base.cpp:296 #: pcbnew/dialogs/panel_edit_options_base.cpp:310 #: pcbnew/dialogs/panel_edit_options_base.cpp:324 msgid "Never" msgstr "從不" #: common/widgets/gal_options_panel.cpp:191 msgid "Cursor Options" msgstr "游標選項" #: common/widgets/gal_options_panel.cpp:202 msgid "Small crosshair" msgstr "小十字" #: common/widgets/gal_options_panel.cpp:203 msgid "Full window crosshair" msgstr "十字游標全屏" #: common/widgets/gal_options_panel.cpp:207 msgid "Cursor Shape" msgstr "游標形狀" #: common/widgets/gal_options_panel.cpp:212 msgid "Cursor shape for drawing, placement and movement tools" msgstr "用於繪圖，放置和移動工具的游標形狀" #: common/widgets/gal_options_panel.cpp:215 msgid "Always show crosshairs" msgstr "始終顯示十字游標" #: common/widgets/grid_text_button_helpers.cpp:407 msgid "Select a File" msgstr "選擇一個檔案" #: common/widgets/grid_text_button_helpers.cpp:439 msgid "Select Path" msgstr "選擇路徑" #: common/widgets/lib_tree.cpp:289 msgid "recent searches" msgstr "最近搜尋" #: common/widgets/mathplot.cpp:1681 msgid "Center plot view to this position" msgstr "居中繪製檢視" #: common/widgets/mathplot.cpp:1682 msgid "Fit on Screen" msgstr "適應螢幕" #: common/widgets/mathplot.cpp:1682 msgid "Set plot view to show all items" msgstr "設定繪製檢視以顯示所有專案" #: common/widgets/mathplot.cpp:1683 msgid "Zoom in plot view." msgstr "放大繪製檢視。" #: common/widgets/mathplot.cpp:1684 msgid "Zoom out plot view." msgstr "縮小繪製檢視。" #: common/widgets/net_selector.cpp:58 gerbview/gerber_draw_item.cpp:703 #: pcbnew/dialogs/dialog_copper_zones.cpp:379 #: pcbnew/dialogs/dialog_copper_zones.cpp:787 msgid "" msgstr "<無網路>" #: common/widgets/net_selector.cpp:59 msgid "" msgstr "< 建立網路 >" #: common/widgets/net_selector.cpp:84 #: eeschema/dialogs/dialog_lib_symbol_properties.cpp:750 #: eeschema/dialogs/dialog_lib_symbol_properties.cpp:793 msgid "Filter:" msgstr "篩選：" #: common/widgets/paged_dialog.cpp:77 common/widgets/paged_dialog.cpp:336 #: eeschema/dialogs/dialog_bom_base.cpp:114 #: pcb_calculator/calculator_panels/panel_regulator_base.cpp:236 #: pcb_calculator/calculator_panels/panel_track_width_base.cpp:288 #: pcb_calculator/calculator_panels/panel_transline_base.cpp:455 #: pcb_calculator/calculator_panels/panel_via_size_base.cpp:365 msgid "Reset to Defaults" msgstr "重置為預設值" #: common/widgets/paged_dialog.cpp:328 #, c-format msgid "Reset %s to Defaults" msgstr "重置 %s 為預設值" #: common/widgets/properties_panel.cpp:68 #: common/widgets/properties_panel.cpp:145 msgid "No objects selected" msgstr "未選擇物件" #: common/widgets/properties_panel.cpp:267 #, c-format msgid "%d objects selected" msgstr "選擇了 %d 個物件" #: common/widgets/properties_panel.cpp:274 msgid "Basic Properties" msgstr "基礎屬性" #: common/widgets/unit_binder.cpp:318 #, c-format msgid "%s must be at least %s." msgstr "%s 必須至少為 %s 。" #: common/widgets/unit_binder.cpp:334 #, c-format msgid "%s must be less than %s." msgstr "%s 必須小於 %s 。" #: common/widgets/widget_hotkey_list.cpp:98 msgid "Press a new hotkey, or press Esc to cancel..." msgstr "按下新的快捷鍵，或按 ESC 取消..." #: common/widgets/widget_hotkey_list.cpp:105 msgid "Command:" msgstr "命令：" #: common/widgets/widget_hotkey_list.cpp:113 msgid "Current key:" msgstr "當前快捷鍵：" #: common/widgets/widget_hotkey_list.cpp:145 msgid "Set Hotkey" msgstr "設定快捷鍵" #: common/widgets/widget_hotkey_list.cpp:351 #, c-format msgid "'%s' is a reserved hotkey in KiCad and cannot be assigned." msgstr "'%s' 是 KiCad 中的一個保留快捷鍵，不能進行分配。" #: common/widgets/widget_hotkey_list.cpp:402 msgid "Edit..." msgstr "編輯..." #: common/widgets/widget_hotkey_list.cpp:403 msgid "Undo Changes" msgstr "撤銷變更" #: common/widgets/widget_hotkey_list.cpp:404 msgid "Clear Assigned Hotkey" msgstr "清除關聯的快捷鍵" #: common/widgets/widget_hotkey_list.cpp:405 msgid "Restore Default" msgstr "重置為預設值" #: common/widgets/widget_hotkey_list.cpp:441 #, c-format msgid "" "'%s' is already assigned to '%s' in section '%s'. Are you sure you want to " "change its assignment?" msgstr "\"%s\" 已經分配給 \"%s\" 部分的 '%s'。你確定修改其分配嗎？" #: common/widgets/widget_hotkey_list.cpp:447 msgid "Confirm change" msgstr "確認修改" #: common/widgets/widget_hotkey_list.cpp:467 msgid "Command" msgstr "命令" #: common/widgets/widget_hotkey_list.cpp:470 msgid "(double-click to edit)" msgstr "(雙擊編輯)" #: common/widgets/widget_hotkey_list.cpp:473 msgid "Hotkey" msgstr "快捷鍵" #: common/widgets/wx_html_report_panel.cpp:192 #: common/widgets/wx_html_report_panel.cpp:213 #: common/widgets/wx_html_report_panel.cpp:242 msgid "Error:" msgstr "錯誤：" #: common/widgets/wx_html_report_panel.cpp:196 #: common/widgets/wx_html_report_panel.cpp:217 #: common/widgets/wx_html_report_panel.cpp:243 msgid "Warning:" msgstr "警告：" #: common/widgets/wx_html_report_panel.cpp:244 msgid "Info:" msgstr "資訊：" #: common/widgets/wx_html_report_panel.cpp:368 #: eeschema/dialogs/dialog_erc.cpp:957 pcbnew/dialogs/dialog_drc.cpp:850 msgid "Save Report to File" msgstr "儲存報告到檔案" #: common/widgets/wx_html_report_panel.cpp:385 #, c-format msgid "Cannot write report to file '%s'." msgstr "無法寫入報告到檔案 \"%s\"。" #: common/widgets/wx_html_report_panel.cpp:387 msgid "File save error" msgstr "檔案儲存錯誤" #: common/widgets/wx_html_report_panel_base.cpp:16 msgid "Output Messages" msgstr "輸出資訊" #: common/widgets/wx_html_report_panel_base.cpp:30 #: eeschema/dialogs/dialog_erc_base.cpp:117 #: pcbnew/dialogs/dialog_drc_base.cpp:167 #: pcbnew/dialogs/dialog_footprint_checker_base.cpp:32 msgid "Show:" msgstr "顯示：" #: common/widgets/wx_html_report_panel_base.cpp:34 #: eeschema/dialogs/dialog_erc_base.cpp:121 eeschema/lib_item.cpp:54 #: pcbnew/dialogs/dialog_board_reannotate.cpp:85 #: pcbnew/dialogs/dialog_board_reannotate_base.cpp:180 #: pcbnew/dialogs/dialog_drc_base.cpp:171 #: pcbnew/dialogs/dialog_footprint_checker_base.cpp:36 #: pcbnew/widgets/appearance_controls.cpp:709 #: pcbnew/widgets/appearance_controls.cpp:751 #: pcbnew/widgets/appearance_controls.cpp:2439 #: pcbnew/widgets/appearance_controls.cpp:2458 msgid "All" msgstr "所有" #: common/widgets/wx_html_report_panel_base.cpp:50 #: eeschema/dialogs/dialog_erc_base.cpp:133 #: pcbnew/dialogs/dialog_drc_base.cpp:183 #: pcbnew/dialogs/dialog_footprint_checker_base.cpp:49 msgid "Warnings" msgstr "警告" #: common/widgets/wx_html_report_panel_base.cpp:59 msgid "Actions" msgstr "操作" #: common/widgets/wx_html_report_panel_base.cpp:65 msgid "Infos" msgstr "資訊" #: common/widgets/wx_html_report_panel_base.cpp:71 #: eeschema/dialogs/dialog_erc_base.cpp:148 #: pcbnew/dialogs/dialog_drc_base.cpp:198 msgid "Save..." msgstr "儲存..." #: common/wildcards_and_files_ext.cpp:201 msgid "All files" msgstr "所有檔案" #: common/wildcards_and_files_ext.cpp:207 msgid "KiCad drawing symbol files" msgstr "KiCad 圖形符號檔案" #: common/wildcards_and_files_ext.cpp:213 msgid "KiCad symbol library files" msgstr "KiCad 符號庫檔案" #: common/wildcards_and_files_ext.cpp:220 msgid "KiCad legacy symbol library files" msgstr "KiCad 舊版符號庫檔案" #: common/wildcards_and_files_ext.cpp:226 msgid "KiCad database library files" msgstr "KiCad 資料庫庫檔案" #: common/wildcards_and_files_ext.cpp:233 msgid "All KiCad symbol library files" msgstr "所有 KiCad 符號庫檔案" #: common/wildcards_and_files_ext.cpp:242 msgid "KiCad project files" msgstr "KiCad 工程檔案" #: common/wildcards_and_files_ext.cpp:248 msgid "KiCad legacy project files" msgstr "KiCad 舊工程檔案" #: common/wildcards_and_files_ext.cpp:255 msgid "All KiCad project files" msgstr "所有 KiCad 工程檔案" #: common/wildcards_and_files_ext.cpp:262 msgid "All KiCad schematic files" msgstr "所有 KiCad 原理圖檔案" #: common/wildcards_and_files_ext.cpp:269 msgid "KiCad legacy schematic files" msgstr "KiCad 舊版原理圖檔案" #: common/wildcards_and_files_ext.cpp:276 msgid "KiCad s-expression schematic files" msgstr "KiCad “S-表示式”原理圖檔案" #: common/wildcards_and_files_ext.cpp:283 msgid "Altium schematic files" msgstr "Altium 原理圖檔案" #: common/wildcards_and_files_ext.cpp:289 msgid "CADSTAR Schematic Archive files" msgstr "CADSTAR 原理圖存檔檔案" #: common/wildcards_and_files_ext.cpp:295 msgid "CADSTAR Archive files" msgstr "CADSTAR 存檔檔案" #: common/wildcards_and_files_ext.cpp:301 msgid "Eagle XML schematic files" msgstr "Eagle XML 原理圖檔案" #: common/wildcards_and_files_ext.cpp:307 msgid "Eagle XML files" msgstr "Eagle XML 檔案" #: common/wildcards_and_files_ext.cpp:313 msgid "OrcadPCB2 netlist files" msgstr "OrcadPCB2 網表文件" #: common/wildcards_and_files_ext.cpp:320 msgid "KiCad netlist files" msgstr "KiCad 網表文件" #: common/wildcards_and_files_ext.cpp:326 #: common/wildcards_and_files_ext.cpp:367 msgid "KiCad printed circuit board files" msgstr "KiCad PCB 檔案" #: common/wildcards_and_files_ext.cpp:332 msgid "Eagle ver. 6.x XML PCB files" msgstr "Eagle ver. 6.x XML PCB 檔案" #: common/wildcards_and_files_ext.cpp:337 msgid "CADSTAR PCB Archive files" msgstr "CADSTAR PCB 壓縮檔案" #: common/wildcards_and_files_ext.cpp:342 msgid "P-Cad 200x ASCII PCB files" msgstr "P-Cad 200x ASCII PCB 檔案" #: common/wildcards_and_files_ext.cpp:347 msgid "Altium Designer PCB files" msgstr "Altium Designer PCB 檔案" #: common/wildcards_and_files_ext.cpp:352 msgid "Altium Circuit Studio PCB files" msgstr "Altium Circuit Studio PCB 檔案" #: common/wildcards_and_files_ext.cpp:357 msgid "Altium Circuit Maker PCB files" msgstr "Altium Circuit Maker PCB 檔案" #: common/wildcards_and_files_ext.cpp:362 msgid "Fabmaster PCB files" msgstr "Fabmaster PCB 檔案" #: common/wildcards_and_files_ext.cpp:374 msgid "KiCad footprint files" msgstr "KiCad 封裝檔案" #: common/wildcards_and_files_ext.cpp:381 msgid "KiCad footprint library paths" msgstr "KiCad 封裝庫路徑" #: common/wildcards_and_files_ext.cpp:388 msgid "Legacy footprint library files" msgstr "舊的封裝庫檔案" #: common/wildcards_and_files_ext.cpp:394 msgid "Altium PCB footprint library files" msgstr "Altium PCB 封裝庫檔案" #: common/wildcards_and_files_ext.cpp:400 msgid "Eagle ver. 6.x XML library files" msgstr "Eagle ver. 6.x XML 庫檔案" #: common/wildcards_and_files_ext.cpp:406 msgid "Geda PCB footprint library files" msgstr "Geda PCB 封裝庫檔案" #: common/wildcards_and_files_ext.cpp:412 msgid "Drawing sheet files" msgstr "圖紙檔案" #: common/wildcards_and_files_ext.cpp:420 msgid "KiCad symbol footprint link files" msgstr "KiCad 符號封裝連結檔案" #: common/wildcards_and_files_ext.cpp:428 gerbview/files.cpp:70 msgid "Drill files" msgstr "鑽孔檔案" #: common/wildcards_and_files_ext.cpp:435 msgid "SVG files" msgstr "SVG 檔案" #: common/wildcards_and_files_ext.cpp:441 msgid "HTML files" msgstr "HTML 檔案" #: common/wildcards_and_files_ext.cpp:447 msgid "CSV Files" msgstr "CSV 檔案" #: common/wildcards_and_files_ext.cpp:453 msgid "Portable document format files" msgstr "行動式文件格式檔案 (*.PDF)" #: common/wildcards_and_files_ext.cpp:459 msgid "PostScript files" msgstr "PostScript 檔案" #: common/wildcards_and_files_ext.cpp:465 msgid "Report files" msgstr "報告檔案" #: common/wildcards_and_files_ext.cpp:471 msgid "Component placement files" msgstr "元件放置檔案" #: common/wildcards_and_files_ext.cpp:477 msgid "VRML and X3D files" msgstr "VRML 和 X3D 檔案" #: common/wildcards_and_files_ext.cpp:483 msgid "IDFv3 footprint files" msgstr "IDFv3 封裝檔案" #: common/wildcards_and_files_ext.cpp:489 msgid "Text files" msgstr "文字檔案" #: common/wildcards_and_files_ext.cpp:495 msgid "Legacy footprint export files" msgstr "舊的封裝匯出檔案" #: common/wildcards_and_files_ext.cpp:501 msgid "Electrical rule check file" msgstr "電氣規則檢查檔案" #: common/wildcards_and_files_ext.cpp:507 msgid "Spice library file" msgstr "Spice 庫檔案" #: common/wildcards_and_files_ext.cpp:513 msgid "SPICE netlist file" msgstr "SPICE 網表文件" #: common/wildcards_and_files_ext.cpp:519 msgid "CadStar netlist file" msgstr "CadStar 網表文件" #: common/wildcards_and_files_ext.cpp:525 msgid "Symbol footprint association files" msgstr "符號封裝關聯檔案" #: common/wildcards_and_files_ext.cpp:531 msgid "Zip file" msgstr "Zip 檔案" #: common/wildcards_and_files_ext.cpp:537 msgid "GenCAD 1.4 board files" msgstr "GenCAD 1.4 線路板檔案" #: common/wildcards_and_files_ext.cpp:543 msgid "DXF Files" msgstr "DXF 檔案" #: common/wildcards_and_files_ext.cpp:549 #: resources/linux/mime/kicad-gerbers.xml.in:22 msgid "Gerber job file" msgstr "Gerber 工作檔案" #: common/wildcards_and_files_ext.cpp:555 msgid "Specctra DSN file" msgstr "Specctra DSN 檔案" #: common/wildcards_and_files_ext.cpp:562 msgid "Specctra Session file" msgstr "Specctra 會話檔案" #: common/wildcards_and_files_ext.cpp:569 msgid "IPC-D-356 Test Files" msgstr "IPC-D-356 測試檔案" #: common/wildcards_and_files_ext.cpp:576 msgid "Workbook file" msgstr "工作簿檔案" #: common/wildcards_and_files_ext.cpp:583 msgid "PNG file" msgstr "PNG 檔案" #: common/wildcards_and_files_ext.cpp:589 msgid "Jpeg file" msgstr "JPEG 檔案" #: common/wildcards_and_files_ext.cpp:595 msgid "Hotkey file" msgstr "快捷鍵檔案" #: cvpcb/auto_associate.cpp:108 #, c-format msgid "Equivalence file '%s' could not be found." msgstr "找不到等價檔案 \"%s\"。" #: cvpcb/auto_associate.cpp:128 #, c-format msgid "Error opening equivalence file '%s'." msgstr "開啟等效檔案 \"%s\" 時出現錯誤。" #: cvpcb/auto_associate.cpp:180 msgid "Equivalence File Load Error" msgstr "等效檔案載入錯誤" #: cvpcb/auto_associate.cpp:187 #, c-format msgid "%lu footprint/symbol equivalences found." msgstr "找到了 %lu 個封裝/符號等價。" #: cvpcb/auto_associate.cpp:263 #, c-format msgid "" "Component %s: footprint %s not found in any of the project footprint " "libraries." msgstr "元件 %s： 沒有在任何工程封裝庫中找到封裝 %s 。" #: cvpcb/auto_associate.cpp:308 msgid "CvPcb Warning" msgstr "CvPcb 警告" #: cvpcb/cvpcb.cpp:174 msgid "" "You have run CvPcb for the first time using the new footprint library table " "method for finding footprints.\n" "CvPcb has either copied the default table or created an empty table in your " "home folder.\n" "You must first configure the library table to include all footprint " "libraries not included with KiCad.\n" "See the \"Footprint Library Table\" section of the CvPcb documentation for " "more information." msgstr "" "你首次使用新的封裝庫表方法執行 CvPcb 查詢封裝。\n" "CvPcb 已經複製了預設表或在你的主資料夾中建立了一個空表。\n" "你必須先配置庫表，以包含 KiCad 中未包含的所有封裝庫。\n" "有關更多資訊。請參閱 CvPcb 文件的“封裝庫表”部分。" #: cvpcb/cvpcb.cpp:187 msgid "" "An error occurred attempting to load the global footprint library table." msgstr "嘗試載入全域性封裝庫表時發生錯誤。" #: cvpcb/cvpcb_mainframe.cpp:67 cvpcb/menubar.cpp:51 msgid "Assign Footprints" msgstr "關聯封裝" #: cvpcb/cvpcb_mainframe.cpp:111 pcbnew/dialogs/panel_fp_lib_table.cpp:1094 msgid "Footprint Libraries" msgstr "封裝庫" #: cvpcb/cvpcb_mainframe.cpp:115 msgid "Symbol : Footprint Assignments" msgstr "符號：封裝關聯" #: cvpcb/cvpcb_mainframe.cpp:118 msgid "Filtered Footprints" msgstr "篩選的封裝" #: cvpcb/cvpcb_mainframe.cpp:149 #: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:130 msgid "Apply, Save Schematic && Continue" msgstr "應用，儲存原理圖並繼續" #: cvpcb/cvpcb_mainframe.cpp:221 msgid "Symbol to footprint changes are unsaved" msgstr "封裝變更的符號未儲存" #: cvpcb/cvpcb_mainframe.cpp:402 msgid "Symbol to Footprint links have been modified. Save changes?" msgstr "符號和封裝關聯已經被修改。要儲存變更嗎？" #: cvpcb/cvpcb_mainframe.cpp:630 cvpcb/tools/cvpcb_association_tool.cpp:208 #, c-format msgid "'%s' is not a valid footprint." msgstr "\"%s\" 不是有效的封裝。" #: cvpcb/cvpcb_mainframe.cpp:793 eeschema/generate_alias_info.cpp:39 #: eeschema/sch_symbol.cpp:1702 eeschema/sch_symbol.cpp:2185 #: eeschema/symbol_editor/symbol_editor.cpp:1275 #: eeschema/symbol_viewer_frame.cpp:522 pcbnew/footprint.cpp:2938 #: pcbnew/generate_footprint_info.cpp:37 pcbnew/plot_board_layers.cpp:105 msgid "Keywords" msgstr "關鍵字" #: cvpcb/cvpcb_mainframe.cpp:809 msgid "Pin Count" msgstr "引腳數量" #: cvpcb/cvpcb_mainframe.cpp:822 eeschema/sch_base_frame.cpp:576 #: eeschema/sch_symbol.cpp:1685 eeschema/sch_symbol.cpp:1689 #: eeschema/sch_symbol.cpp:1719 pcbnew/footprint.cpp:1031 msgid "Library" msgstr "庫" #: cvpcb/cvpcb_mainframe.cpp:835 msgid "Search Text" msgstr "搜尋文字" #: cvpcb/cvpcb_mainframe.cpp:839 msgid "No Filtering" msgstr "無篩選" #: cvpcb/cvpcb_mainframe.cpp:841 #, c-format msgid "Filtered by %s" msgstr "篩選 %s" #: cvpcb/cvpcb_mainframe.cpp:855 #, c-format msgid "Description: %s; Keywords: %s" msgstr "描述：%s； 關鍵字：%s" #: cvpcb/cvpcb_mainframe.cpp:887 #, c-format msgid "Library location: %s" msgstr "庫位置：%s" #: cvpcb/cvpcb_mainframe.cpp:889 msgid "Library location: unknown" msgstr "庫位置：未知" #: cvpcb/cvpcb_mainframe.cpp:902 msgid "" "No PCB footprint libraries are listed in the current footprint library table." msgstr "在當前封裝庫表中沒有列出 PCB 封裝庫。" #: cvpcb/cvpcb_mainframe.cpp:903 msgid "Configuration Error" msgstr "配置錯誤" #: cvpcb/cvpcb_mainframe.cpp:907 pcbnew/footprint_edit_frame.cpp:955 #: pcbnew/load_select_footprint.cpp:225 msgid "Loading Footprint Libraries" msgstr "載入封裝庫" #: cvpcb/cvpcb_mainframe.cpp:973 #, c-format msgid "" "Error loading schematic.\n" "%s" msgstr "" "載入原理圖時出錯。\n" "%s" #: cvpcb/dialogs/dialog_config_equfiles.cpp:51 #, c-format msgid "Project file: '%s'" msgstr "工程檔案：\"%s\"" #: cvpcb/dialogs/dialog_config_equfiles.cpp:103 #: eeschema/dialogs/dialog_bom.cpp:448 #: gerbview/tools/gerbview_inspection_tool.cpp:185 #: kicad/project_tree_pane.cpp:781 msgid "No text editor selected in KiCad. Please choose one." msgstr "在 KiCad 中未選擇任何文字編輯器，請選擇一個。" #: cvpcb/dialogs/dialog_config_equfiles.cpp:244 msgid "Footprint Association File" msgstr "封裝關聯檔案" #: cvpcb/dialogs/dialog_config_equfiles.cpp:288 #, c-format msgid "File '%s' already exists in list." msgstr "檔案 \"%s\" 已經存在於列表中。" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:20 msgid "Symbol Footprint Association Files (.equ)" msgstr "符號封裝關聯檔案（.equ）" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:36 #: eeschema/sch_base_frame.cpp:284 pcbnew/footprint_libraries_utils.cpp:532 msgid "Add" msgstr "新增" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:39 msgid "Remove" msgstr "移除" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:42 #: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:63 msgid "Move Up" msgstr "上移" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:45 #: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:68 msgid "Move Down" msgstr "下移" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:48 msgid "Edit File" msgstr "編輯檔案" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:63 msgid "Available environment variables for relative paths:" msgstr "可選的相對路徑環境變數：" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:80 #: eeschema/dialogs/dialog_label_properties_base.cpp:88 #: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:60 #: eeschema/dialogs/dialog_rescue_each.cpp:134 #: eeschema/dialogs/dialog_sheet_properties_base.cpp:61 #: eeschema/dialogs/dialog_sim_format_value.cpp:71 #: eeschema/dialogs/dialog_symbol_fields_table.cpp:1040 #: eeschema/dialogs/dialog_symbol_properties_base.cpp:57 #: eeschema/dialogs/panel_sym_lib_table.cpp:311 #: eeschema/fields_grid_table.cpp:339 eeschema/sch_symbol.cpp:1664 #: eeschema/sch_symbol.cpp:1709 eeschema/sim/sim_plot_frame.cpp:502 #: eeschema/sim/sim_plot_frame.cpp:2268 #: eeschema/sim/sim_plot_frame_base.cpp:177 #: eeschema/sim/sim_plot_frame_base.cpp:228 #: pcbnew/dialogs/dialog_footprint_properties_base.cpp:70 #: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:70 #: pcbnew/dialogs/dialog_fp_plugin_options_base.cpp:44 #: pcbnew/dialogs/panel_fp_editor_defaults.cpp:64 #: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:57 #: pcbnew/dialogs/panel_fp_lib_table.cpp:466 pcbnew/footprint.cpp:2928 #: pcbnew/footprint_wizard_frame.cpp:326 pcbnew/fp_text.cpp:279 #: pcbnew/fp_text_grid_table.cpp:121 pcbnew/pcb_dimension.cpp:306 #: pcbnew/plot_board_layers.cpp:90 msgid "Value" msgstr "值" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:99 #: pcbnew/dialogs/dialog_gendrill_base.cpp:98 msgid "Absolute" msgstr "絕對" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:99 msgid "Relative" msgstr "相對" #: cvpcb/dialogs/dialog_config_equfiles_base.cpp:101 msgid "Path Type" msgstr "軌跡型別" #: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:37 msgid "Ref" msgstr "參考" #: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:38 msgid "Schematic assignment" msgstr "原理圖關聯" #: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:41 msgid "Cmp file assignment" msgstr "元件檔案關聯" #: cvpcb/dialogs/fp_conflict_assignment_selector_base.cpp:19 msgid "" "Footprint assignments from schematic netlist and symbol footprint " "association file (.cmp) are conflicting.\n" "\n" "Please choose the assignment." msgstr "" "原理圖網表與符號封裝關聯檔案(.cmp)的封裝關聯有衝突\n" "\n" "請選擇關聯。" #: cvpcb/dialogs/fp_conflict_assignment_selector_base.h:53 msgid "Footprint Assignment Conflicts" msgstr "封裝關聯衝突" #: cvpcb/display_footprints_frame.cpp:72 #: pcbnew/toolbars_footprint_viewer.cpp:176 msgid "Footprint Viewer" msgstr "封裝瀏覽" #: cvpcb/display_footprints_frame.cpp:325 #: pcbnew/toolbars_footprint_viewer.cpp:107 msgid "Automatic Zoom on footprint change" msgstr "封裝變化時自動縮放" #: cvpcb/display_footprints_frame.cpp:413 #, c-format msgid "Footprint ID '%s' is not valid." msgstr "封裝 ID \"%s\" 無效。" #: cvpcb/display_footprints_frame.cpp:428 #, c-format msgid "Library '%s' is not in the footprint library table." msgstr "庫 '%s' 不在封裝庫表中。" #: cvpcb/display_footprints_frame.cpp:437 #: cvpcb/display_footprints_frame.cpp:462 #, c-format msgid "Footprint '%s' not found." msgstr "未找到封裝 \"%s\" 。" #: cvpcb/display_footprints_frame.cpp:492 pcbnew/footprint.cpp:1077 #, c-format msgid "Footprint: %s" msgstr "封裝：%s" #: cvpcb/display_footprints_frame.cpp:523 #, c-format msgid "Lib: %s" msgstr "庫：%s" #: cvpcb/readwrite_dlgs.cpp:119 msgid "" "Some of the assigned footprints are legacy entries with no library names. " "Would you like KiCad to attempt to convert them to the new required LIB_ID " "format? (If you answer no, then these assignments will be cleared and you " "will need to re-assign them manually.)" msgstr "" "一些分配的封裝是沒有庫名的舊條目。你希望 Kicad 試著將它們轉換為新的必需的 " "LIB_ID 格式嗎？（如果你回答否，這些分配將被清除，你必須自己手動重新分配它" "們。）" #: cvpcb/readwrite_dlgs.cpp:148 #, c-format msgid "Component '%s' footprint '%s' not found in any library.\n" msgstr "元件 \"%s\" 封裝 \"%s\" 在任意庫中均 沒有找到 .\n" #: cvpcb/readwrite_dlgs.cpp:155 #, c-format msgid "Component '%s' footprint '%s' was found in multiple libraries.\n" msgstr "元件 \"%s\" 封裝 \"%s\" 在 多個 庫中被找到。\n" #: cvpcb/readwrite_dlgs.cpp:168 msgid "First check your footprint library table entries." msgstr "首先檢查封裝庫表條目。" #: cvpcb/readwrite_dlgs.cpp:170 msgid "Problematic Footprint Library Tables" msgstr "有問題的封裝庫表" #: cvpcb/readwrite_dlgs.cpp:178 msgid "" "The following errors occurred attempting to convert the footprint " "assignments:\n" "\n" msgstr "" "試圖轉換封裝關聯時發生下列錯誤：\n" "\n" #: cvpcb/readwrite_dlgs.cpp:181 msgid "" "\n" "You will need to reassign them manually if you want them to be updated " "correctly the next time you import the netlist in Pcbnew." msgstr "" "\n" "如果你希望下次在 Pcbnew 中匯入網表時正確更新它們，則需要手動重新關聯它們。" #: cvpcb/readwrite_dlgs.cpp:307 msgid "Schematic saved" msgstr "儲存原理圖" #: cvpcb/toolbars_cvpcb.cpp:70 msgid "Footprint Filters:" msgstr "封裝篩選器：" #: cvpcb/tools/cvpcb_actions.cpp:52 msgid "View selected footprint" msgstr "檢視選擇封裝" #: cvpcb/tools/cvpcb_actions.cpp:53 msgid "View the selected footprint in the footprint viewer" msgstr "在封裝檢視器中檢視所選的封裝" #: cvpcb/tools/cvpcb_actions.cpp:60 msgid "Manage Footprint Association Files" msgstr "管理封裝關聯檔案" #: cvpcb/tools/cvpcb_actions.cpp:61 msgid "" "Configure footprint association file (.equ) list. These files are used to " "automatically assign footprint names from symbol values." msgstr "" "配置佔用空間關聯檔案 (.equ) 列表。 這些檔案用於從符號值自動關聯封裝名稱。" #: cvpcb/tools/cvpcb_actions.cpp:67 msgid "Save to Schematic" msgstr "儲存到原理圖" #: cvpcb/tools/cvpcb_actions.cpp:68 msgid "Save footprint associations in schematic symbol footprint fields" msgstr "在原理圖符號封裝欄位中儲存封裝關聯" #: cvpcb/tools/cvpcb_actions.cpp:74 msgid "Save to Schematic and File" msgstr "儲存到原理圖和檔案" #: cvpcb/tools/cvpcb_actions.cpp:75 msgid "" "Save footprint associations in schematic symbol footprint fields and " "schematic files" msgstr "將封裝關聯儲存在原理圖符號封裝欄位和原理圖檔案中" #: cvpcb/tools/cvpcb_actions.cpp:98 msgid "Select next unassigned symbol" msgstr "分配選擇下一個未賦值的符號" #: cvpcb/tools/cvpcb_actions.cpp:99 msgid "Select next symbol with no footprint assignment" msgstr "選擇下一個沒有封裝賦值的符號" #: cvpcb/tools/cvpcb_actions.cpp:105 msgid "Select previous unassigned symbol" msgstr "選擇上一個未賦值的符號" #: cvpcb/tools/cvpcb_actions.cpp:106 msgid "Select previous symbol with no footprint assignment" msgstr "選擇上一個沒有封裝賦值的符號" #: cvpcb/tools/cvpcb_actions.cpp:115 msgid "Assign footprint" msgstr "對封裝賦值" #: cvpcb/tools/cvpcb_actions.cpp:116 msgid "Assign footprint to selected symbols" msgstr "將封裝分配到選定的符號" #: cvpcb/tools/cvpcb_actions.cpp:121 msgid "Automatically assign footprints" msgstr "自動分配封裝" #: cvpcb/tools/cvpcb_actions.cpp:122 msgid "Perform automatic footprint assignment" msgstr "執行自動封裝分配" #: cvpcb/tools/cvpcb_actions.cpp:128 msgid "Delete association" msgstr "刪除關聯" #: cvpcb/tools/cvpcb_actions.cpp:129 msgid "Delete selected footprint associations" msgstr "刪除所選的封裝關聯" #: cvpcb/tools/cvpcb_actions.cpp:134 cvpcb/tools/cvpcb_actions.cpp:135 msgid "Delete all footprint associations" msgstr "刪除所有封裝關聯" #: cvpcb/tools/cvpcb_actions.cpp:142 msgid "Use symbol footprint filters" msgstr "使用符號封裝篩選器" #: cvpcb/tools/cvpcb_actions.cpp:143 msgid "Filter footprint list by footprint filters defined in the symbol" msgstr "按符號中定義的封裝篩選器篩選封裝列表" #: cvpcb/tools/cvpcb_actions.cpp:149 msgid "Filter by pin count" msgstr "按引腳計數篩選" #: cvpcb/tools/cvpcb_actions.cpp:150 msgid "Filter footprint list by pin count" msgstr "按引腳數量篩選封裝列表" #: cvpcb/tools/cvpcb_actions.cpp:156 msgid "Filter by library" msgstr "按庫篩選" #: cvpcb/tools/cvpcb_actions.cpp:157 msgid "Filter footprint list by library" msgstr "按庫篩選封裝列表" #: cvpcb/tools/cvpcb_association_tool.cpp:255 msgid "Delete all associations?" msgstr "是否刪除所有關聯？" #: eeschema/annotate.cpp:265 #, c-format msgid "%d duplicate time stamps were found and replaced." msgstr "找到並替換 %d 個重複的時間戳。" #: eeschema/annotate.cpp:378 #, c-format msgid "Updated %s (unit %s) from %s to %s." msgstr "將 %s (單元 %s) 從 %s 更新到了 %s。" #: eeschema/annotate.cpp:386 #, c-format msgid "Updated %s from %s to %s." msgstr "已將 %s 從 %s 更新至 %s。" #: eeschema/annotate.cpp:396 #, c-format msgid "Annotated %s (unit %s) as %s." msgstr "已將 %s (單元 %s) 批註為 %s。" #: eeschema/annotate.cpp:403 #, c-format msgid "Annotated %s as %s." msgstr "已將 %s 批註為 %s。" #: eeschema/annotate.cpp:420 msgid "Annotation complete." msgstr "批註完成。" #: eeschema/bom_plugins.cpp:46 #, c-format msgid "" "Script file:\n" "%s\n" "not found. Script not available." msgstr "" "指令碼檔案:\n" "%s\n" "沒有找到。指令碼不可用。" #: eeschema/connection_graph.cpp:2462 eeschema/connection_graph.cpp:2495 #, c-format msgid "" "Both %s and %s are attached to the same items; %s will be used in the netlist" msgstr "%s 和 %s 都連線到同一根導線上；選擇 %s 作為用於網路列表的標籤" #: eeschema/connection_graph.cpp:2764 #, c-format msgid "" "Net %s is graphically connected to bus %s but is not a member of that bus" msgstr "網路 %s 以圖形方式連線到匯流排 %s，但不是匯流排的成員" #: eeschema/connection_graph.cpp:3246 #, c-format msgid "Sheet pin %s has no matching hierarchical label inside the sheet" msgstr "圖紙頁碼 %s 在圖框內沒有匹配的分層標籤" #: eeschema/connection_graph.cpp:3264 #, c-format msgid "Hierarchical label %s has no matching sheet pin in the parent sheet" msgstr "層次標籤 %s 在父圖框內沒有匹配的圖紙頁碼" #: eeschema/cross-probing.cpp:164 #, c-format msgid "%s pin %s found" msgstr "%s 引腳 %s 被找到" #: eeschema/cross-probing.cpp:166 #, c-format msgid "%s found but pin %s not found" msgstr "找到了 %s 但未找到引腳 %s" #: eeschema/cross-probing.cpp:170 #, c-format msgid "%s found" msgstr "找到 %s" #: eeschema/cross-probing.cpp:175 eeschema/sim/sim_plot_frame.cpp:1244 #: eeschema/sim/sim_plot_frame.cpp:1569 eeschema/widgets/tuner_slider.cpp:55 #, c-format msgid "%s not found" msgstr "未找到 %s" #: eeschema/cross-probing.cpp:216 msgid "Selected net:" msgstr "選擇網路：" #: eeschema/dialogs/dialog_annotate.cpp:90 msgid "Annotation Messages:" msgstr "批註資訊：" #: eeschema/dialogs/dialog_annotate.cpp:93 msgid "Annotate" msgstr "批註" #: eeschema/dialogs/dialog_annotate_base.cpp:40 #: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:25 #: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:26 #: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:25 #: pcbnew/teardrop/dialog_teardrop_base.cpp:347 msgid "Scope" msgstr "範圍" #: eeschema/dialogs/dialog_annotate_base.cpp:42 msgid "Entire schematic" msgstr "整個原理圖" #: eeschema/dialogs/dialog_annotate_base.cpp:45 msgid "Current sheet only" msgstr "僅當前圖框" #: eeschema/dialogs/dialog_annotate_base.cpp:48 #: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:101 #: pcbnew/dialogs/dialog_board_reannotate_base.cpp:190 msgid "Selection" msgstr "選擇" #: eeschema/dialogs/dialog_annotate_base.cpp:51 msgid "Recurse into subsheets" msgstr "遞迴到子圖框" #: eeschema/dialogs/dialog_annotate_base.cpp:58 #: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:27 msgid "Order" msgstr "順序" #: eeschema/dialogs/dialog_annotate_base.cpp:63 #: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:37 msgid "Sort symbols by &X position" msgstr "按 &X 位置排列符號" #: eeschema/dialogs/dialog_annotate_base.cpp:75 #: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:49 msgid "Sort symbols by &Y position" msgstr "按 &Y 位置排列符號" #: eeschema/dialogs/dialog_annotate_base.cpp:87 msgid "Keep existing annotations" msgstr "保持現有的批註" #: eeschema/dialogs/dialog_annotate_base.cpp:87 msgid "Reset existing annotations" msgstr "重置現有的批註" #: eeschema/dialogs/dialog_annotate_base.cpp:94 #: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:61 msgid "Numbering" msgstr "編號方式" #: eeschema/dialogs/dialog_annotate_base.cpp:101 #: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:73 msgid "Use first free number after:" msgstr "使用該數字之後的編號：" #: eeschema/dialogs/dialog_annotate_base.cpp:107 #: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:79 msgid "First free after sheet number X 100" msgstr "參考編號 X 100" #: eeschema/dialogs/dialog_annotate_base.cpp:110 #: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:82 msgid "First free after sheet number X 1000" msgstr "參考編號 X 1000" #: eeschema/dialogs/dialog_annotate_base.cpp:133 msgid "Clear Annotation" msgstr "清除批註" #: eeschema/dialogs/dialog_annotate_base.h:85 msgid "Annotate Schematic" msgstr "批註原理圖" #: eeschema/dialogs/dialog_bom.cpp:135 msgid "Generate" msgstr "生成" #: eeschema/dialogs/dialog_bom.cpp:217 msgid "(file missing)" msgstr "(檔案缺失)" #: eeschema/dialogs/dialog_bom.cpp:294 #, c-format msgid "The selected BOM generator script %s could not be found." msgstr "所選的材料表生成器指令碼 %s 無法被找到。" #: eeschema/dialogs/dialog_bom.cpp:299 #, c-format msgid "" "\n" "\n" "Searched:\n" "\t%s\n" "\t%s" msgstr "" "\n" "\n" "搜尋到：\n" "%s\n" "%s" #: eeschema/dialogs/dialog_bom.cpp:345 msgid "Generating BOM requires a fully annotated schematic." msgstr "生成材料表 (BOM) 需要一張完全註釋的原理圖。" #: eeschema/dialogs/dialog_bom.cpp:382 eeschema/dialogs/dialog_bom_base.cpp:45 msgid "Generator nickname:" msgstr "生成別稱：" #: eeschema/dialogs/dialog_bom.cpp:382 msgid "Add Generator" msgstr "新增生成器" #: eeschema/dialogs/dialog_bom.cpp:391 #, c-format msgid "Nickname '%s' already in use." msgstr "別名 \"%s\" 已經被佔用了。" #: eeschema/dialogs/dialog_bom.cpp:420 #: eeschema/dialogs/dialog_export_netlist.cpp:764 msgid "Generator File" msgstr "生成器檔案" #: eeschema/dialogs/dialog_bom.cpp:439 msgid "Generator file name not found." msgstr "找不到生成器檔名。" #: eeschema/dialogs/dialog_bom.cpp:460 msgid "Bill of Materials Generation Help" msgstr "物料清單生成幫助" #: eeschema/dialogs/dialog_bom_base.cpp:27 msgid "BOM generator scripts:" msgstr "BOM 生成器指令碼：" #: eeschema/dialogs/dialog_bom_base.cpp:71 msgid "Add a new BOM generator and its command line to the list" msgstr "向列表中新增新的 BOM 生成器及其命令列" #: eeschema/dialogs/dialog_bom_base.cpp:76 msgid "Edit the script file in the text editor" msgstr "編輯文字編輯器中的指令碼檔案" #: eeschema/dialogs/dialog_bom_base.cpp:84 msgid "Remove the current generator script from list" msgstr "從列表中刪除當前生成器指令碼" #: eeschema/dialogs/dialog_bom_base.cpp:94 msgid "Command line running the generator:" msgstr "執行生成器的命令列：" #: eeschema/dialogs/dialog_bom_base.cpp:103 msgid "Show console window" msgstr "顯示控制檯視窗" #: eeschema/dialogs/dialog_bom_base.cpp:104 msgid "" "By default, command line runs with hidden console window and output is " "redirected to the info display.\n" "Set this option to show the window of the running command." msgstr "" "預設情況下, 命令列使用隱藏的控制檯視窗執行, 並將輸出重定向到資訊顯示。\n" "設定此選項以顯示正在執行的命令的視窗。" #: eeschema/dialogs/dialog_bom_base.cpp:115 msgid "Reset the list of BOM generator scripts to the default settings" msgstr "重置 BOM 生成器指令碼到預設設定" #: eeschema/dialogs/dialog_bom_base.h:81 msgid "Bill of Materials" msgstr "BOM (物料清單)" #: eeschema/dialogs/dialog_bom_help_md.h:2 msgid "" "# 1. Summary\n" "\n" "The Bill of Materials tool creates a BOM which lists all of the components " "in the design.\n" "\n" "The tool uses an external script to generate a BOM in the desired output " "format. Choosing a different script changes how the BOM is formatted.\n" "\n" "Generating a BOM is described in more detail in the Schematic Editor " "manual.\n" "\n" "# 2. Usage\n" "\n" "Select a generator script in the **BOM generator scripts** list. Details for " "the selected generator are shown on the right of the dialog.\n" "\n" "Clicking the **Generate** button creates a BOM file with the selected " "generator.\n" "\n" "The default settings present several generator script options, although some " "additional scripts are installed with KiCad and can be added to the list " "with the **+** button.\n" "\n" "**Note:** On Windows, there is an additional option **Show console window**. " "When this option is unchecked, BOM generators run in a hidden console window " "and any output is redirected and printed in the dialog. When this option is " "checked, BOM generators run in a visisble console window.\n" "\n" "# 3. Custom generators and command lines\n" "\n" "Internally, KiCad creates an intermediate netlist file in XML format that " "contains information about all of the components in the design. A BOM " "generator script converts the intermediate netlist file to the desired " "output format. KiCad runs the BOM generator scripts according to the command " "line entered at the bottom of the BOM dialog.\n" "\n" "The command line format accepts parameters for filenames. Each formatting " "parameter is replaced with a project-specific path or filename. The " "supported formatting parameters are:\n" "\n" " * `%I`: absolute path and filename of the intermediate netlist file, which " "is the input to the BOM generator\n" " * `%O`: absolute path and filename of the output BOM file (without file " "extension)\n" " * `%B`: base filename of the output BOM file (without file extension)\n" " * `%P`: absolute path of the project directory, without trailing slash\n" "\n" "**Note:** the `%O` output file parameter does not include a file extension. " "KiCad will attempt to add an appropriate extension to the command line " "automatically, but an extension may need to be added by hand.\n" "\n" "Python is the recommended tool for BOM generator scripts, but other tools " "can also be used.\n" "\n" "## Example command lines for Python scripts\n" "\n" "The command line format for a Python script is of the form:\n" "\n" "```\n" "python