/*
 * This program source code file is part of KiCad, a free EDA CAD application.
 *
 * Copyright (C) 2014 CERN
 * @author Maciej Suminski <maciej.suminski@cern.ch>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, you may find one here:
 * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
 * or you may search the http://www.gnu.org website for the version 2 license,
 * or you may write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

#include "drawing_tool.h"
#include "common_actions.h"

#include <wxPcbStruct.h>
#include <class_draw_panel_gal.h>
#include <project.h>
#include <id.h>
#include <pcbnew_id.h>
#include <confirm.h>
#include <dialog_edit_module_text.h>
#include <import_dxf/dialog_dxf_import.h>

#include <view/view_group.h>
#include <view/view_controls.h>
#include <gal/graphics_abstraction_layer.h>
#include <tool/tool_manager.h>
#include <router/direction.h>

#include <class_board.h>
#include <class_edge_mod.h>
#include <class_pcb_text.h>
#include <class_dimension.h>
#include <class_zone.h>
#include <class_module.h>

DRAWING_TOOL::DRAWING_TOOL() :
    TOOL_INTERACTIVE( "pcbnew.InteractiveDrawing" ), m_view( NULL ),
    m_controls( NULL ), m_board( NULL ), m_frame( NULL ), m_editModules( false ), m_lineWidth( 1 )
{
}


DRAWING_TOOL::~DRAWING_TOOL()
{
}


void DRAWING_TOOL::Reset( RESET_REASON aReason )
{
    // Init variables used by every drawing tool
    m_view = getView();
    m_controls = getViewControls();
    m_board = getModel<BOARD>();
    m_frame = getEditFrame<PCB_EDIT_FRAME>();
}


int DRAWING_TOOL::DrawLine( const TOOL_EVENT& aEvent )
{
    boost::optional<VECTOR2D> startingPoint;

    if( m_editModules )
    {
        m_frame->SetToolID( ID_MODEDIT_LINE_TOOL, wxCURSOR_PENCIL, _( "Add graphic line" ) );

        EDGE_MODULE* line = new EDGE_MODULE( m_board->m_Modules );

        while( drawSegment( S_SEGMENT, reinterpret_cast<DRAWSEGMENT*&>( line ), startingPoint  ) )
        {
            if( line )
            {
                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
                line->SetParent( m_board->m_Modules );
                line->SetLocalCoord();
                m_board->m_Modules->GraphicalItems().PushFront( line );
                startingPoint = line->GetEnd();
            }
            else
            {
                startingPoint = boost::none;
            }

            line = new EDGE_MODULE( m_board->m_Modules );
        }
    }
    else
    {
        m_frame->SetToolID( ID_PCB_ADD_LINE_BUTT, wxCURSOR_PENCIL, _( "Add graphic line" ) );

        DRAWSEGMENT* line = new DRAWSEGMENT;

        while( drawSegment( S_SEGMENT, line, startingPoint ) )
        {
            if( line )
            {
                m_board->Add( line );
                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( line, UR_NEW );
                startingPoint = line->GetEnd();
            }
            else
            {
                startingPoint = boost::none;
            }

            line = new DRAWSEGMENT;
        }
    }

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


int DRAWING_TOOL::DrawCircle( const TOOL_EVENT& aEvent )
{
    if( m_editModules )
    {
        m_frame->SetToolID( ID_MODEDIT_CIRCLE_TOOL, wxCURSOR_PENCIL, _( "Add graphic circle" ) );

        EDGE_MODULE* circle = new EDGE_MODULE( m_board->m_Modules );

        while( drawSegment( S_CIRCLE, reinterpret_cast<DRAWSEGMENT*&>( circle ) ) )
        {
            if( circle )
            {
                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
                circle->SetParent( m_board->m_Modules );
                circle->SetLocalCoord();
                m_board->m_Modules->GraphicalItems().PushFront( circle );
            }

            circle = new EDGE_MODULE( m_board->m_Modules );
        }
    }
    else
    {
        m_frame->SetToolID( ID_PCB_CIRCLE_BUTT, wxCURSOR_PENCIL, _( "Add graphic circle" ) );

        DRAWSEGMENT* circle = new DRAWSEGMENT;

        while( drawSegment( S_CIRCLE, circle ) )
        {
            if( circle )
            {
                m_board->Add( circle );
                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( circle, UR_NEW );
            }

            circle = new DRAWSEGMENT;
        }
    }

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


int DRAWING_TOOL::DrawArc( const TOOL_EVENT& aEvent )
{
    if( m_editModules )
    {
        m_frame->SetToolID( ID_MODEDIT_ARC_TOOL, wxCURSOR_PENCIL, _( "Add graphic arc" ) );

        EDGE_MODULE* arc = new EDGE_MODULE( m_board->m_Modules );

        while( drawArc( reinterpret_cast<DRAWSEGMENT*&>( arc ) ) )
        {
            if( arc )
            {
                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
                arc->SetParent( m_board->m_Modules );
                arc->SetLocalCoord();
                m_board->m_Modules->GraphicalItems().PushFront( arc );
            }

            arc = new EDGE_MODULE( m_board->m_Modules );
        }
    }
    else
    {
        m_frame->SetToolID( ID_PCB_ARC_BUTT, wxCURSOR_PENCIL, _( "Add graphic arc" ) );

        DRAWSEGMENT* arc = new DRAWSEGMENT;

        while( drawArc( arc ) )
        {
            if( arc )
            {
                m_board->Add( arc );
                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( arc, UR_NEW );
            }

            arc = new DRAWSEGMENT;
        }
    }

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


int DRAWING_TOOL::PlaceText( const TOOL_EVENT& aEvent )
{
    if( m_editModules )
        return placeTextModule();
    else
        return placeTextPcb();
}


int DRAWING_TOOL::DrawDimension( const TOOL_EVENT& aEvent )
{
    DIMENSION* dimension = NULL;
    int width, maxThickness;

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );

    Activate();
    m_frame->SetToolID( ID_PCB_DIMENSION_BUTT, wxCURSOR_PENCIL, _( "Add dimension" ) );

    enum DIMENSION_STEPS
    {
        SET_ORIGIN = 0,
        SET_END,
        SET_HEIGHT,
        FINISHED
    };
    int step = SET_ORIGIN;

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        VECTOR2I cursorPos = m_controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
        {
            if( step != SET_ORIGIN )    // start from the beginning
            {
                preview.Clear();
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                delete dimension;
                step = SET_ORIGIN;
            }
            else
                break;

            if( evt->IsActivate() )  // now finish unconditionally
                break;
        }

        else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) && step != SET_ORIGIN )
        {
            dimension->SetWidth( dimension->GetWidth() + WIDTH_STEP );
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }

        else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) && step != SET_ORIGIN )
        {
            int width = dimension->GetWidth();

            if( width > WIDTH_STEP )
            {
                dimension->SetWidth( width - WIDTH_STEP );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            switch( step )
            {
            case SET_ORIGIN:
                {
                    LAYER_ID layer = m_frame->GetScreen()->m_Active_Layer;

                    if( IsCopperLayer( layer ) || layer == Edge_Cuts )
                    {
                        DisplayInfoMessage( NULL, _( "Dimension not allowed on Copper or Edge Cut layers" ) );
                        --step;
                    }
                    else
                    {
                        // Init the new item attributes
                        dimension = new DIMENSION( m_board );
                        dimension->SetLayer( layer );
                        dimension->SetOrigin( wxPoint( cursorPos.x, cursorPos.y ) );
                        dimension->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
                        dimension->Text().SetSize( m_board->GetDesignSettings().m_PcbTextSize );

                        width = m_board->GetDesignSettings().m_PcbTextWidth;
                        maxThickness = Clamp_Text_PenSize( width, dimension->Text().GetSize() );

                        if( width > maxThickness )
                            width = maxThickness;

                        dimension->Text().SetThickness( width );
                        dimension->SetWidth( width );
                        dimension->AdjustDimensionDetails();

                        preview.Add( dimension );

                        m_controls->SetAutoPan( true );
                        m_controls->CaptureCursor( true );
                    }
                }
                break;

            case SET_END:
                dimension->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );

                // Dimensions that have origin and end in the same spot are not valid
                if( dimension->GetOrigin() == dimension->GetEnd() )
                    --step;
                break;

            case SET_HEIGHT:
                {
                    if( wxPoint( cursorPos.x, cursorPos.y ) != dimension->GetPosition() )
                    {
                        assert( dimension->GetOrigin() != dimension->GetEnd() );
                        assert( dimension->GetWidth() > 0 );

                        m_view->Add( dimension );
                        m_board->Add( dimension );
                        dimension->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                        m_frame->OnModify();
                        m_frame->SaveCopyInUndoList( dimension, UR_NEW );

                        preview.Remove( dimension );
                    }
                }
                break;
            }

            if( ++step == FINISHED )
            {
                step = SET_ORIGIN;
                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );
            }
        }

        else if( evt->IsMotion() )
        {
            switch( step )
            {
            case SET_END:
                dimension->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
                break;

            case SET_HEIGHT:
            {
                // Calculating the direction of travel perpendicular to the selected axis
                double angle = dimension->GetAngle() + ( M_PI / 2 );

                wxPoint pos( cursorPos.x, cursorPos.y );
                wxPoint delta( pos - dimension->m_featureLineDO );
                double height  = ( delta.x * cos( angle ) ) + ( delta.y * sin( angle ) );
                dimension->SetHeight( height );
            }
            break;
            }

            // Show a preview of the item
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }
    }

    if( step != SET_ORIGIN )
        delete dimension;

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


int DRAWING_TOOL::DrawZone( const TOOL_EVENT& aEvent )
{
    m_frame->SetToolID( ID_PCB_ZONES_BUTT, wxCURSOR_PENCIL, _( "Add zones" ) );

    return drawZone( false );
}


int DRAWING_TOOL::DrawKeepout( const TOOL_EVENT& aEvent )
{
    m_frame->SetToolID( ID_PCB_KEEPOUT_AREA_BUTT, wxCURSOR_PENCIL, _( "Add keepout" ) );

    return drawZone( true );
}


int DRAWING_TOOL::PlaceDXF( const TOOL_EVENT& aEvent )
{
    DIALOG_DXF_IMPORT dlg( m_frame );
    int dlgResult = dlg.ShowModal();

    const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();

    if( dlgResult != wxID_OK || m_board->m_Modules == NULL || list.empty() )
        return 0;

    VECTOR2I cursorPos = m_controls->GetCursorPosition();
    VECTOR2I delta = cursorPos - (*list.begin())->GetPosition();

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );

    // Build the undo list & add items to the current view
    std::list<BOARD_ITEM*>::const_iterator it, itEnd;
    for( it = list.begin(), itEnd = list.end(); it != itEnd; ++it )
    {
        BOARD_ITEM* item = *it;
        BOARD_ITEM* converted = NULL;

        // Modules use different types for the same things,
        // so we need to convert imported items to appropriate classes.
        switch( item->Type() )
        {
        case PCB_LINE_T:
        {
            if( m_editModules )
            {
                converted = new EDGE_MODULE( m_board->m_Modules );
                *static_cast<DRAWSEGMENT*>( converted ) = *static_cast<DRAWSEGMENT*>( item );
                converted->Move( wxPoint( delta.x, delta.y ) );
                preview.Add( converted );
                delete item;
            }
            else
            {
                preview.Add( item );
            }

            break;
        }

        case PCB_TEXT_T:
        {
            if( m_editModules )
            {
                converted = new TEXTE_MODULE( m_board->m_Modules );
                *static_cast<TEXTE_PCB*>( converted ) = *static_cast<TEXTE_PCB*>( item );
                converted->Move( wxPoint( delta.x, delta.y ) );
                preview.Add( converted );
                delete item;
            }
            else
            {
                preview.Add( item );
            }
            break;
        }

        default:
            assert( false );    // there is a type that is currently not handled here
            break;
        }
    }

    BOARD_ITEM* firstItem = static_cast<BOARD_ITEM*>( *preview.Begin() );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );

    Activate();

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        cursorPos = m_controls->GetCursorPosition();

        if( evt->IsMotion() )
        {
            delta = cursorPos - firstItem->GetPosition();

            for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
                static_cast<BOARD_ITEM*>( *it )->Move( wxPoint( delta.x, delta.y ) );

            preview.ViewUpdate();
        }

        else if( evt->Category() == TC_COMMAND )
        {
            if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
            {
                for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
                    static_cast<BOARD_ITEM*>( *it )->Rotate( wxPoint( cursorPos.x, cursorPos.y ),
                                                             m_frame->GetRotationAngle() );

                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
            else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
            {
                for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
                    static_cast<BOARD_ITEM*>( *it )->Flip( wxPoint( cursorPos.x, cursorPos.y ) );

                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
            else if( evt->IsCancel() || evt->IsActivate() )
            {
                preview.FreeItems();
                break;
            }
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            // Place the drawing
            if( m_editModules )
            {
                m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
                m_board->m_Modules->SetLastEditTime();

                for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
                {
                    BOARD_ITEM* item = static_cast<BOARD_ITEM*>( *it );
                    m_board->m_Modules->Add( item );

                    switch( item->Type() )
                    {
                    case PCB_MODULE_TEXT_T:
                        static_cast<TEXTE_MODULE*>( item )->SetLocalCoord();
                        break;

                    case PCB_MODULE_EDGE_T:
                        static_cast<EDGE_MODULE*>( item )->SetLocalCoord();
                        break;

                    default:
                        assert( false );
                        break;
                    }

                    m_view->Add( item );
                }
            }
            else
            {
                PICKED_ITEMS_LIST picklist;

                for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
                {
                    BOARD_ITEM* item = static_cast<BOARD_ITEM*>( *it );
                    m_board->Add( item );

                    ITEM_PICKER itemWrapper( item, UR_NEW );
                    picklist.PushItem( itemWrapper );

                    m_view->Add( item );
                }

                m_frame->SaveCopyInUndoList( picklist, UR_NEW );
            }

            m_frame->OnModify();

            break;
        }
    }

    preview.Clear();

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    return 0;
}


int DRAWING_TOOL::SetAnchor( const TOOL_EVENT& aEvent )
{
    assert( m_editModules );

    Activate();
    m_frame->SetToolID( ID_MODEDIT_ANCHOR_TOOL, wxCURSOR_PENCIL,
                        _( "Place the footprint anchor" ) );

    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );
    m_controls->SetAutoPan( true );
    m_controls->CaptureCursor( false );

    while( OPT_TOOL_EVENT evt = Wait() )
    {
        if( evt->IsClick( BUT_LEFT ) )
        {
            m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );

            // set the new relative internal local coordinates of footprint items
            VECTOR2I cursorPos = m_controls->GetCursorPosition();
            wxPoint moveVector = m_board->m_Modules->GetPosition() - wxPoint( cursorPos.x, cursorPos.y );
            m_board->m_Modules->MoveAnchorPosition( moveVector );

            m_board->m_Modules->ViewUpdate();

            // Usually, we do not need to change twice the anchor position,
            // so deselect the active tool
            break;
        }

        else if( evt->IsCancel() || evt->IsActivate() )
            break;
    }

    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_controls->SetSnapping( false );
    m_controls->ShowCursor( false );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


bool DRAWING_TOOL::drawSegment( int aShape, DRAWSEGMENT*& aGraphic,
                                boost::optional<VECTOR2D> aStartingPoint )
{
    // Only two shapes are currently supported
    assert( aShape == S_SEGMENT || aShape == S_CIRCLE );

    DRAWSEGMENT line45;

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );

    Activate();

    bool direction45 = false;       // 45 degrees only mode
    bool started = false;
    VECTOR2I cursorPos = m_controls->GetCursorPosition();

    if( aStartingPoint )
    {
        LAYER_ID layer = m_frame->GetScreen()->m_Active_Layer;

        // Init the new item attributes
        aGraphic->SetShape( (STROKE_T) aShape );
        aGraphic->SetWidth( m_lineWidth );
        aGraphic->SetStart( wxPoint( aStartingPoint->x, aStartingPoint->y ) );
        aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
        aGraphic->SetLayer( layer );

        if( aShape == S_SEGMENT )
            line45 = *aGraphic; // used only for direction 45 mode with lines

        preview.Add( aGraphic );
        m_controls->SetAutoPan( true );
        m_controls->CaptureCursor( true );

        started = true;
    }

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        bool updatePreview = false;            // should preview be updated
        cursorPos = m_controls->GetCursorPosition();

        // Enable 45 degrees lines only mode by holding control
        if( direction45 != evt->Modifier( MD_CTRL ) && started && aShape == S_SEGMENT )
        {
            direction45 = evt->Modifier( MD_CTRL );

            if( direction45 )
            {
                preview.Add( &line45 );
                make45DegLine( aGraphic, &line45 );
            }
            else
            {
                preview.Remove( &line45 );
                aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
            }

            updatePreview = true;
        }

        if( evt->IsCancel() || evt->IsActivate() || evt->IsAction( &COMMON_ACTIONS::layerChanged ) )
        {
            preview.Clear();
            updatePreview = true;
            delete aGraphic;
            aGraphic = NULL;
            break;
        }

        else if( evt->IsClick( BUT_LEFT ) || evt->IsDblClick( BUT_LEFT ) )
        {
            if( !started )
            {
                LAYER_ID layer = m_frame->GetScreen()->m_Active_Layer;

                if( IsCopperLayer( layer ) )
                {
                    DisplayInfoMessage( NULL, _( "Graphic not allowed on Copper layers" ) );
                }
                else
                {
                    // Init the new item attributes
                    aGraphic->SetShape( (STROKE_T) aShape );
                    m_lineWidth = getSegmentWidth( layer );
                    aGraphic->SetWidth( m_lineWidth );
                    aGraphic->SetStart( wxPoint( cursorPos.x, cursorPos.y ) );
                    aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
                    aGraphic->SetLayer( layer );

                    if( aShape == S_SEGMENT )
                        line45 = *aGraphic; // used only for direction 45 mode with lines

                    preview.Add( aGraphic );
                    m_controls->SetAutoPan( true );
                    m_controls->CaptureCursor( true );

                    started = true;
                }
            }
            else
            {
                if( aGraphic->GetEnd() == aGraphic->GetStart() ||
                        ( evt->IsDblClick( BUT_LEFT ) && aShape == S_SEGMENT ) )
                                                // User has clicked twice in the same spot
                {                               // a clear sign that the current drawing is finished
                    if( direction45 )
                    {
                        DRAWSEGMENT* l = static_cast<DRAWSEGMENT*>( line45.Clone() );
                        l->SetEnd( aGraphic->GetStart() );
                        m_board->Add( l );
                        m_frame->OnModify();
                        m_frame->SaveCopyInUndoList( l, UR_NEW );
                        m_view->Add( l );
                        l->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
                    }

                    delete aGraphic;            // but only if at least one graphic was created
                    aGraphic = NULL;            // otherwise - force user to draw more or cancel
                }
                else
                {
                    assert( aGraphic->GetLength() > 0 );
                    assert( aGraphic->GetWidth() > 0 );

                    m_view->Add( aGraphic );
                    aGraphic->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
                }

                preview.Clear();
                break;
            }
        }

        else if( evt->IsMotion() )
        {
            // 45 degree lines
            if( direction45 && aShape == S_SEGMENT )
                make45DegLine( aGraphic, &line45 );
            else
                aGraphic->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );

            updatePreview = true;
        }

        else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) )
        {
            m_lineWidth += WIDTH_STEP;
            aGraphic->SetWidth( m_lineWidth );
            updatePreview = true;
        }

        else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) )
        {
            if( m_lineWidth > (unsigned) WIDTH_STEP )
            {
                m_lineWidth -= WIDTH_STEP;
                aGraphic->SetWidth( m_lineWidth );
                updatePreview = true;
            }
        }

        if( updatePreview )
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
    }

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    return started;
}


bool DRAWING_TOOL::drawArc( DRAWSEGMENT*& aGraphic )
{
    bool clockwise = true;      // drawing direction of the arc
    double startAngle = 0.0f;   // angle of the first arc line
    VECTOR2I cursorPos = m_controls->GetCursorPosition();

    DRAWSEGMENT helperLine;
    helperLine.SetShape( S_SEGMENT );
    helperLine.SetLayer( Dwgs_User );
    helperLine.SetWidth( 1 );

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );

    Activate();

    enum ARC_STEPS
    {
        SET_ORIGIN = 0,
        SET_END,
        SET_ANGLE,
        FINISHED
    };
    int step = SET_ORIGIN;

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        cursorPos = m_controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
        {
            preview.Clear();
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            delete aGraphic;
            aGraphic = NULL;
            break;
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            switch( step )
            {
            case SET_ORIGIN:
            {
                LAYER_ID layer = m_frame->GetScreen()->m_Active_Layer;

                if( IsCopperLayer( layer ) )
                {
                    DisplayInfoMessage( NULL, _( "Graphic not allowed on Copper layers" ) );
                    --step;
                }
                else
                {
                    // Init the new item attributes
                    aGraphic->SetShape( S_ARC );
                    aGraphic->SetAngle( 0.0 );
                    aGraphic->SetWidth( getSegmentWidth( layer ) );
                    aGraphic->SetCenter( wxPoint( cursorPos.x, cursorPos.y ) );
                    aGraphic->SetLayer( layer );

                    helperLine.SetStart( aGraphic->GetCenter() );
                    helperLine.SetEnd( aGraphic->GetCenter() );

                    preview.Add( aGraphic );
                    preview.Add( &helperLine );

                    m_controls->SetAutoPan( true );
                    m_controls->CaptureCursor( true );
                }
            }
            break;

            case SET_END:
            {
                if( wxPoint( cursorPos.x, cursorPos.y ) != aGraphic->GetCenter() )
                {
                    VECTOR2D startLine( aGraphic->GetArcStart() - aGraphic->GetCenter() );
                    startAngle = startLine.Angle();
                    aGraphic->SetArcStart( wxPoint( cursorPos.x, cursorPos.y ) );
                }
                else
                    --step;     // one another chance to draw a proper arc
            }
            break;

            case SET_ANGLE:
            {
                if( wxPoint( cursorPos.x, cursorPos.y ) != aGraphic->GetArcStart() && aGraphic->GetAngle() != 0 )
                {
                    assert( aGraphic->GetArcStart() != aGraphic->GetArcEnd() );
                    assert( aGraphic->GetWidth() > 0 );

                    m_view->Add( aGraphic );
                    aGraphic->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                    preview.Remove( aGraphic );
                    preview.Remove( &helperLine );
                }
                else
                    --step;     // one another chance to draw a proper arc
            }
            break;
            }

            if( ++step == FINISHED )
                break;
        }

        else if( evt->IsMotion() )
        {
            switch( step )
            {
            case SET_END:
                helperLine.SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
                aGraphic->SetArcStart( wxPoint( cursorPos.x, cursorPos.y ) );
                break;

            case SET_ANGLE:
            {
                VECTOR2D endLine( wxPoint( cursorPos.x, cursorPos.y ) - aGraphic->GetCenter() );
                double newAngle = RAD2DECIDEG( endLine.Angle() - startAngle );

                // Adjust the new angle to (counter)clockwise setting
                if( clockwise && newAngle < 0.0 )
                    newAngle += 3600.0;
                else if( !clockwise && newAngle > 0.0 )
                    newAngle -= 3600.0;

                aGraphic->SetAngle( newAngle );
            }
            break;
            }

            // Show a preview of the item
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }

        else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) )
        {
            aGraphic->SetWidth( aGraphic->GetWidth() + WIDTH_STEP );
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }

        else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) )
        {
            int width = aGraphic->GetWidth();

            if( width > WIDTH_STEP )
            {
                aGraphic->SetWidth( width - WIDTH_STEP );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
        }

        else if( evt->IsAction( &COMMON_ACTIONS::arcPosture ) )
        {
            if( clockwise )
                aGraphic->SetAngle( aGraphic->GetAngle() - 3600.0 );
            else
                aGraphic->SetAngle( aGraphic->GetAngle() + 3600.0 );

            clockwise = !clockwise;
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }
    }

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    return ( step > SET_ORIGIN );
}


int DRAWING_TOOL::drawZone( bool aKeepout )
{
    ZONE_CONTAINER* zone = NULL;
    DRAWSEGMENT line45;
    DRAWSEGMENT* helperLine = NULL;  // we will need more than one helper line

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );

    Activate();

    VECTOR2I lastCursorPos = m_controls->GetCursorPosition();
    VECTOR2I origin;
    int numPoints = 0;
    bool direction45 = false;       // 45 degrees only mode

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        bool updatePreview = false;            // should preview be updated
        VECTOR2I cursorPos = m_controls->GetCursorPosition();

        // Enable 45 degrees lines only mode by holding control
        if( direction45 != ( evt->Modifier( MD_CTRL ) && numPoints > 0 ) )
        {
            direction45 = evt->Modifier( MD_CTRL );

            if( direction45 )
            {
                preview.Add( &line45 );
                make45DegLine( helperLine, &line45 );
            }
            else
            {
                preview.Remove( &line45 );
                helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
            }

            updatePreview = true;
        }

        if( evt->IsCancel() || evt->IsActivate() )
        {
            if( numPoints > 0 )         // cancel the current zone
            {
                delete zone;
                zone = NULL;
                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );

                if( direction45 )
                {
                    preview.Remove( &line45 );
                    direction45 = false;
                }

                preview.FreeItems();
                updatePreview = true;

                numPoints = 0;
            }
            else                        // there is no zone currently drawn - just stop the tool
                break;

            if( evt->IsActivate() )  // now finish unconditionally
                break;
        }

        else if( evt->IsClick( BUT_LEFT ) || evt->IsDblClick( BUT_LEFT ) )
        {
            // Check if it is double click / closing line (so we have to finish the zone)
            if( evt->IsDblClick( BUT_LEFT ) || lastCursorPos == cursorPos || ( numPoints > 0 && cursorPos == origin ) )
            {
                if( numPoints > 2 )     // valid zone consists of more than 2 points
                {
                    assert( zone->GetNumCorners() > 2 );

                    // Finish the zone
                    if( direction45 )
                        zone->AppendCorner( cursorPos == origin ? line45.GetStart() : line45.GetEnd() );

                    zone->Outline()->CloseLastContour();
                    zone->Outline()->RemoveNullSegments();

                    m_board->Add( zone );
                    m_view->Add( zone );

                    if( !aKeepout )
                        static_cast<PCB_EDIT_FRAME*>( m_frame )->Fill_Zone( zone );

                    zone->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                    m_frame->OnModify();
                    m_frame->SaveCopyInUndoList( zone, UR_NEW );

                    zone = NULL;
                }
                else
                {
                    delete zone;
                    zone = NULL;
                }

                numPoints = 0;
                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );

                if( direction45 )
                {
                    preview.Remove( &line45 );
                    direction45 = false;
                }

                preview.FreeItems();
                updatePreview = true;
            }
            else
            {
                if( numPoints == 0 )        // it's the first click
                {
                    // Get the current default settings for zones
                    ZONE_SETTINGS zoneInfo = m_frame->GetZoneSettings();
                    zoneInfo.m_CurrentZone_Layer = m_frame->GetScreen()->m_Active_Layer;

                    m_controls->SetAutoPan( true );
                    m_controls->CaptureCursor( true );

                    // Show options dialog
                    ZONE_EDIT_T dialogResult;

                    if( aKeepout )
                        dialogResult = InvokeKeepoutAreaEditor( m_frame, &zoneInfo );
                    else
                    {
                        if( IsCopperLayer( zoneInfo.m_CurrentZone_Layer ) )
                            dialogResult = InvokeCopperZonesEditor( m_frame, &zoneInfo );
                        else
                            dialogResult = InvokeNonCopperZonesEditor( m_frame, NULL, &zoneInfo );
                    }

                    if( dialogResult == ZONE_ABORT )
                    {
                        m_controls->SetAutoPan( false );
                        m_controls->CaptureCursor( false );
                        continue;
                    }

                    // Apply the selected settings
                    zone = new ZONE_CONTAINER( m_board );
                    zoneInfo.ExportSetting( *zone );
                    m_frame->GetGalCanvas()->SetTopLayer( zoneInfo.m_CurrentZone_Layer );

                    // Add the first point
                    zone->Outline()->Start( zoneInfo.m_CurrentZone_Layer,
                                            cursorPos.x, cursorPos.y,
                                            zone->GetHatchStyle() );
                    origin = cursorPos;

                    // Helper line represents the currently drawn line of the zone polygon
                    helperLine = new DRAWSEGMENT;
                    helperLine->SetShape( S_SEGMENT );
                    helperLine->SetWidth( 1 );
                    helperLine->SetLayer( zoneInfo.m_CurrentZone_Layer );
                    helperLine->SetStart( wxPoint( cursorPos.x, cursorPos.y ) );
                    helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
                    line45 = *helperLine;

                    preview.Add( helperLine );
                }
                else
                {
                    zone->AppendCorner( helperLine->GetEnd() );
                    helperLine = new DRAWSEGMENT( *helperLine );
                    helperLine->SetStart( helperLine->GetEnd() );
                    preview.Add( helperLine );
                }

                ++numPoints;
                updatePreview = true;
            }

            lastCursorPos = cursorPos;
        }

        else if( evt->IsMotion() && numPoints > 0 )
        {
            // 45 degree lines
            if( direction45 )
                make45DegLine( helperLine, &line45 );
            else
                helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );

            // Show a preview of the item
            updatePreview = true;
        }

        if( updatePreview )
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
    }

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


int DRAWING_TOOL::placeTextModule()
{
    TEXTE_MODULE* text = new TEXTE_MODULE( NULL );
    const BOARD_DESIGN_SETTINGS& dsnSettings = m_frame->GetDesignSettings();

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );
    // do not capture or auto-pan until we start placing some text

    Activate();
    m_frame->SetToolID( ID_PCB_ADD_TEXT_BUTT, wxCURSOR_PENCIL, _( "Add text" ) );
    bool placing = false;

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        VECTOR2I cursorPos = m_controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
        {
            preview.Clear();
            preview.ViewUpdate();
            m_controls->SetAutoPan( false );
            m_controls->CaptureCursor( false );
            m_controls->ShowCursor( true );

            if( !placing || evt->IsActivate() )
            {
                delete text;
                break;
            }
            else
            {
                placing = false;  // start from the beginning
            }
        }

        else if( text && evt->Category() == TC_COMMAND )
        {
            if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
            {
                text->Rotate( text->GetPosition(), m_frame->GetRotationAngle() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
            else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
            {
                text->Flip( text->GetPosition() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            if( !placing )
            {
                text->SetSize( dsnSettings.m_ModuleTextSize );
                text->SetThickness( dsnSettings.m_ModuleTextWidth );
                text->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) );

                DialogEditModuleText textDialog( m_frame, text, NULL );
                placing = textDialog.ShowModal() && ( text->GetText().Length() > 0 );

                if( !placing )
                    continue;

                m_controls->CaptureCursor( true );
                m_controls->SetAutoPan( true );
                m_controls->ShowCursor( false );
                text->SetParent( m_board->m_Modules );  // it has to set after the settings dialog
                                                        // otherwise the dialog stores it in undo buffer
                preview.Add( text );
            }
            else
            {
                assert( text->GetText().Length() > 0 );
                assert( text->GetSize().x > 0 && text->GetSize().y > 0 );

                text->SetLocalCoord();
                text->ClearFlags();

                // Module has to be saved before any modification is made
                m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
                m_board->m_Modules->GraphicalItems().PushFront( text );

                m_view->Add( text );
                text->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                m_frame->OnModify();

                preview.Remove( text );
                m_controls->CaptureCursor( false );
                m_controls->SetAutoPan( false );
                m_controls->ShowCursor( true );

                text = new TEXTE_MODULE( NULL );
                placing = false;
            }
        }

        else if( text && evt->IsMotion() )
        {
            text->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) );

            // Show a preview of the item
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }
    }

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


int DRAWING_TOOL::placeTextPcb()
{
    TEXTE_PCB* text = NULL;

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );
     // do not capture or auto-pan until we start placing some text

    Activate();
    m_frame->SetToolID( ID_PCB_ADD_TEXT_BUTT, wxCURSOR_PENCIL, _( "Add text" ) );

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        VECTOR2I cursorPos = m_controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
        {
            if( text )
            {
                // Delete the old text and have another try
                m_board->Delete( text );        // it was already added by CreateTextPcb()
                text = NULL;

                preview.Clear();
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );
                m_controls->ShowCursor( true );
            }
            else
                break;

            if( evt->IsActivate() )  // now finish unconditionally
                break;
        }

        else if( text && evt->Category() == TC_COMMAND )
        {
            if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
            {
                text->Rotate( text->GetPosition(), m_frame->GetRotationAngle() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
            else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
            {
                text->Flip( text->GetPosition() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            if( !text )
            {
                // Init the new item attributes
                text = static_cast<PCB_EDIT_FRAME*>( m_frame )->CreateTextePcb( NULL );

                if( text == NULL )
                    continue;

                m_controls->CaptureCursor( true );
                m_controls->SetAutoPan( true );
                m_controls->ShowCursor( false );
                preview.Add( text );
            }
            else
            {
                assert( text->GetText().Length() > 0 );
                assert( text->GetSize().x > 0 && text->GetSize().y > 0 );

                text->ClearFlags();
                m_view->Add( text );
                // m_board->Add( text );        // it is already added by CreateTextePcb()
                text->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( text, UR_NEW );

                preview.Remove( text );
                m_controls->CaptureCursor( false );
                m_controls->SetAutoPan( false );
                m_controls->ShowCursor( true );

                text = NULL;
            }
        }

        else if( text && evt->IsMotion() )
        {
            text->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) );

            // Show a preview of the item
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }
    }

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}


void DRAWING_TOOL::make45DegLine( DRAWSEGMENT* aSegment, DRAWSEGMENT* aHelper ) const
{
    VECTOR2I cursorPos = m_controls->GetCursorPosition();
    VECTOR2I origin( aSegment->GetStart() );
    DIRECTION_45 direction( origin - cursorPos );
    SHAPE_LINE_CHAIN newChain = direction.BuildInitialTrace( origin, cursorPos );

    if( newChain.PointCount() > 2 )
    {
        aSegment->SetEnd( wxPoint( newChain.Point( -2 ).x, newChain.Point( -2 ).y ) );
        aHelper->SetStart( wxPoint( newChain.Point( -2 ).x, newChain.Point( -2 ).y ) );
        aHelper->SetEnd( wxPoint( newChain.Point( -1 ).x, newChain.Point( -1 ).y ) );
    }
    else
    {
        aSegment->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
        aHelper->SetStart( wxPoint( cursorPos.x, cursorPos.y ) );
        aHelper->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
    }
}


void DRAWING_TOOL::SetTransitions()
{
    Go( &DRAWING_TOOL::DrawLine,         COMMON_ACTIONS::drawLine.MakeEvent() );
    Go( &DRAWING_TOOL::DrawCircle,       COMMON_ACTIONS::drawCircle.MakeEvent() );
    Go( &DRAWING_TOOL::DrawArc,          COMMON_ACTIONS::drawArc.MakeEvent() );
    Go( &DRAWING_TOOL::DrawDimension,    COMMON_ACTIONS::drawDimension.MakeEvent() );
    Go( &DRAWING_TOOL::DrawZone,         COMMON_ACTIONS::drawZone.MakeEvent() );
    Go( &DRAWING_TOOL::DrawKeepout,      COMMON_ACTIONS::drawKeepout.MakeEvent() );
    Go( &DRAWING_TOOL::PlaceText,        COMMON_ACTIONS::placeText.MakeEvent() );
    Go( &DRAWING_TOOL::PlaceDXF,         COMMON_ACTIONS::placeDXF.MakeEvent() );
    Go( &DRAWING_TOOL::SetAnchor,        COMMON_ACTIONS::setAnchor.MakeEvent() );
}


int DRAWING_TOOL::getSegmentWidth( unsigned int aLayer ) const
{
    assert( m_board );

    if( aLayer == Edge_Cuts )
        return m_board->GetDesignSettings().m_EdgeSegmentWidth;
    else if( m_editModules )
        return m_board->GetDesignSettings().m_ModuleSegmentWidth;
    else
        return m_board->GetDesignSettings().m_DrawSegmentWidth;
}


const int DRAWING_TOOL::WIDTH_STEP = 100000;