/******************************************************************************
 * Module editor: Dialog box for editing module properties in the pcb editor. *
 ******************************************************************************/

#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "bitmaps.h"
#include "appl_wxstruct.h"
#include "gestfich.h"
#include "3d_struct.h"
#include "3d_viewer.h"
#include "wxPcbStruct.h"
#include "dialog_edit_module_for_BoardEditor.h"


DIALOG_MODULE_BOARD_EDITOR::DIALOG_MODULE_BOARD_EDITOR(
    WinEDA_PcbFrame* aParent,
    MODULE*          aModule,
    wxDC*            aDC ) :
    DIALOG_MODULE_BOARD_EDITOR_BASE( aParent )
{
    m_Parent = aParent;
    m_DC     = aDC;
    m_CurrentModule = aModule;

    SetIcon( wxICON( icon_modedit ) );        // Give an icon

    InitModeditProperties();
    InitBoardProperties();

    GetSizer()->Fit( this );
    GetSizer()->SetSizeHints( this );
    Centre();
}


DIALOG_MODULE_BOARD_EDITOR::~DIALOG_MODULE_BOARD_EDITOR()
{
    for( unsigned ii = 0; ii < m_Shapes3D_list.size(); ii++ )
        delete m_Shapes3D_list[ii];

    m_Shapes3D_list.clear();

    delete m_ReferenceCopy;
    delete m_ValueCopy;
    delete m_3D_Scale;
    delete m_3D_Offset;
    delete m_3D_Rotation;
}


/* Creation of the panel properties of the module editor. */
void DIALOG_MODULE_BOARD_EDITOR::InitBoardProperties()
{
    PutValueInLocalUnits( *m_ModPositionX,
                          m_CurrentModule->GetPosition().x, PCB_INTERNAL_UNIT );
    AddUnitSymbol( *XPositionStatic, g_UserUnit );

    PutValueInLocalUnits( *m_ModPositionY,
                          m_CurrentModule->GetPosition().y, PCB_INTERNAL_UNIT );
    AddUnitSymbol( *YPositionStatic, g_UserUnit );

    m_LayerCtrl->SetSelection(
         (m_CurrentModule->GetLayer() == LAYER_N_BACK) ? 1 : 0 );

    bool select = FALSE;
    switch( m_CurrentModule->m_Orient )
    {
    case 0:
        m_OrientCtrl->SetSelection( 0 );
        break;

    case 900:
    case -2700:
        m_OrientCtrl->SetSelection( 1 );
        break;

    case -900:
    case 2700:
        m_OrientCtrl->SetSelection( 2 );
        break;

    case -1800:
    case 1800:
        m_OrientCtrl->SetSelection( 3 );
        break;

    default:
        m_OrientCtrl->SetSelection( 4 );
        select = TRUE;
        break;
    }

    wxString msg;
    msg << m_CurrentModule->m_Orient;
    m_OrientValue->SetValue( msg );
    m_OrientValue->Enable( select );

    // Initialize dialog relative to masks clearances
    m_NetClearanceUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
    m_SolderMaskMarginUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
    m_SolderPasteMarginUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );

    int internalUnit = m_Parent->m_InternalUnits;
    PutValueInLocalUnits( *m_NetClearanceValueCtrl,
                          m_CurrentModule->m_LocalClearance, internalUnit );
    PutValueInLocalUnits( *m_SolderMaskMarginCtrl,
                          m_CurrentModule->m_LocalSolderMaskMargin,
                          internalUnit );

    // These 2 parameters are usually < 0, so prepare entering a negative
    // value, if current is 0
    PutValueInLocalUnits( *m_SolderPasteMarginCtrl,
                          m_CurrentModule->m_LocalSolderPasteMargin,
                          internalUnit );
    if( m_CurrentModule->m_LocalSolderPasteMargin == 0 )
        m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) +
                                           m_SolderPasteMarginCtrl->GetValue() );
    msg.Printf( wxT( "%.1f" ),
                    m_CurrentModule->m_LocalSolderPasteMarginRatio * 100.0 );
    if( m_CurrentModule->m_LocalSolderPasteMarginRatio == 0.0 &&
        msg[0] == '0')  // Sometimes Printf add a sign if the value is small
        m_SolderPasteMarginRatioCtrl->SetValue( wxT("-") + msg );
    else
        m_SolderPasteMarginRatioCtrl->SetValue( msg );
}


void DIALOG_MODULE_BOARD_EDITOR::OnCancelClick( wxCommandEvent& event )
{
    EndModal( -1 );
}


void DIALOG_MODULE_BOARD_EDITOR::GotoModuleEditor( wxCommandEvent& event )
{
    if( m_CurrentModule->m_TimeStamp == 0 )    // Module Editor needs a non
                                               // null timestamp
    {
        m_CurrentModule->m_TimeStamp = GetTimeStamp();
        m_Parent->OnModify();
    }

    EndModal( 2 );
}


void DIALOG_MODULE_BOARD_EDITOR::ExchangeModule( wxCommandEvent& event )
{
    m_Parent->InstallExchangeModuleFrame( m_CurrentModule );

    // Warning: m_CurrentModule was deleted by exchange module
    m_Parent->SetCurItem( NULL );
    EndModal( 0 );
}


void DIALOG_MODULE_BOARD_EDITOR::ModuleOrientEvent( wxCommandEvent& event )
{
    switch( m_OrientCtrl->GetSelection() )
    {
    case 0:
        m_OrientValue->Enable( FALSE );
        m_OrientValue->SetValue( wxT( "0" ) );
        break;

    case 1:
        m_OrientValue->Enable( FALSE );
        m_OrientValue->SetValue( wxT( "900" ) );
        break;

    case 2:
        m_OrientValue->Enable( FALSE );
        m_OrientValue->SetValue( wxT( "2700" ) );
        break;

    case 3:
        m_OrientValue->Enable( FALSE );
        m_OrientValue->SetValue( wxT( "1800" ) );
        break;

    default:
        m_OrientValue->Enable( TRUE );
        break;
    }
}


void DIALOG_MODULE_BOARD_EDITOR::InitModeditProperties()
{
    SetFocus();

    m_LastSelected3DShapeIndex = -1;

    /* Init 3D shape list */
    S3D_MASTER* draw3D = m_CurrentModule->m_3D_Drawings;

    while( draw3D )
    {
        if( !draw3D->m_Shape3DName.IsEmpty() )
        {
            S3D_MASTER* draw3DCopy = new S3D_MASTER( NULL );
            draw3DCopy->Copy( draw3D );
            m_Shapes3D_list.push_back( draw3DCopy );
            m_3D_ShapeNameListBox->Append( draw3DCopy->m_Shape3DName );
        }
        draw3D = (S3D_MASTER*) draw3D->Next();
    }

    m_ReferenceCopy = new TEXTE_MODULE( NULL );
    m_ValueCopy     = new TEXTE_MODULE( NULL );
    m_ReferenceCopy->Copy( m_CurrentModule->m_Reference );
    m_ValueCopy->Copy( m_CurrentModule->m_Value );
    m_ReferenceCtrl->SetValue( m_ReferenceCopy->m_Text );
    m_ValueCtrl->SetValue( m_ValueCopy->m_Text );


#if wxCHECK_VERSION( 2, 8, 0 )
    m_AttributsCtrl->SetItemToolTip( 0,
                                    _( "Use this attribute for most non smd components" ) );
    m_AttributsCtrl->SetItemToolTip( 1,
                                    _( "Use this attribute for smd components.\nOnly components with this option are put in the footprint position list file" ) );
    m_AttributsCtrl->SetItemToolTip( 2,
                                    _( "Use this attribute for \"virtual\" components drawn on board (like a old ISA PC bus connector)" ) );
#endif

    /* Controls on right side of the dialog */
    switch( m_CurrentModule->m_Attributs & 255 )
    {
    case 0:
        m_AttributsCtrl->SetSelection( 0 );
        break;

    case MOD_CMS:
        m_AttributsCtrl->SetSelection( 1 );
        break;

    case MOD_VIRTUAL:
        m_AttributsCtrl->SetSelection( 2 );
        break;

    default:
        m_AttributsCtrl->SetSelection( 0 );
        break;
    }

    m_AutoPlaceCtrl->SetSelection(
        (m_CurrentModule->m_ModuleStatus & MODULE_is_LOCKED) ? 1 : 0 );
#if wxCHECK_VERSION( 2, 8, 0 )
    m_AutoPlaceCtrl->SetItemToolTip( 0,
                                    _( "Enable hotkey move commands and Auto Placement" ) );
    m_AutoPlaceCtrl->SetItemToolTip( 1,
                                    _( "Disable hotkey move commands and Auto Placement" ) );
#endif
    m_CostRot90Ctrl->SetValue( m_CurrentModule->m_CntRot90 );

    m_CostRot180Ctrl->SetValue( m_CurrentModule->m_CntRot180 );

    // Initialize 3D parameters

    wxBoxSizer* BoxSizer = new wxBoxSizer( wxVERTICAL );
    m_3D_Scale = new WinEDA_VertexCtrl( m_Panel3D, _( "Shape Scale:" ),
                                        BoxSizer, UNSCALED_UNITS, 1 );
    m_Sizer3DValues->Add( BoxSizer, 0, wxGROW | wxALL, 5 );

    BoxSizer    = new wxBoxSizer( wxVERTICAL );
    m_3D_Offset = new WinEDA_VertexCtrl( m_Panel3D, _( "Shape Offset:" ),
                                         BoxSizer, UNSCALED_UNITS, 1 );
    m_Sizer3DValues->Add( BoxSizer, 0, wxGROW | wxALL, 5 );

    BoxSizer = new wxBoxSizer( wxVERTICAL );
    m_3D_Rotation = new WinEDA_VertexCtrl( m_Panel3D, _( "Shape Rotation:" ),
                                           BoxSizer, UNSCALED_UNITS, 1 );
    m_Sizer3DValues->Add( BoxSizer, 0, wxGROW | wxALL, 5 );

    // if m_3D_ShapeNameListBox is not empty, preselect first 3D shape
    if( m_3D_ShapeNameListBox->GetCount() > 0 )
    {
        m_LastSelected3DShapeIndex = 0;
        m_3D_ShapeNameListBox->SetSelection( m_LastSelected3DShapeIndex );
        Transfert3DValuesToDisplay( m_Shapes3D_list[m_LastSelected3DShapeIndex] );
    }
}


/* Initialize 3D info displayed in dialog box from values in aStruct3DSource
 */
void DIALOG_MODULE_BOARD_EDITOR::Transfert3DValuesToDisplay(
    S3D_MASTER* aStruct3DSource )
{
    if( aStruct3DSource )
    {
        m_3D_Scale->SetValue( aStruct3DSource->m_MatScale );

        m_3D_Offset->SetValue( aStruct3DSource->m_MatPosition );

        m_3D_Rotation->SetValue( aStruct3DSource->m_MatRotation );
    }
    else
    {
        S3D_Vertex dummy_vertex;
        dummy_vertex.x = dummy_vertex.y = dummy_vertex.z = 1.0;
        m_3D_Scale->SetValue( dummy_vertex );
    }
}


/** Copy 3D info displayed in dialog box to values in a item in m_Shapes3D_list
 * @param aIndexSelection = item index in m_Shapes3D_list
 */
void DIALOG_MODULE_BOARD_EDITOR::TransfertDisplayTo3DValues(
    int aIndexSelection  )
{
    if( aIndexSelection >= (int) m_Shapes3D_list.size() )
        return;

    S3D_MASTER* struct3DDest = m_Shapes3D_list[aIndexSelection];
    struct3DDest->m_MatScale    = m_3D_Scale->GetValue();
    struct3DDest->m_MatRotation = m_3D_Rotation->GetValue();
    struct3DDest->m_MatPosition = m_3D_Offset->GetValue();
}


void DIALOG_MODULE_BOARD_EDITOR::On3DShapeNameSelected( wxCommandEvent& event )
{
    if( m_LastSelected3DShapeIndex >= 0 )
        TransfertDisplayTo3DValues( m_LastSelected3DShapeIndex );
    m_LastSelected3DShapeIndex = m_3D_ShapeNameListBox->GetSelection();

    if( m_LastSelected3DShapeIndex < 0 )    // happens under wxGTK when
                                            // deleting an item in
                                            // m_3D_ShapeNameListBox wxListBox
        return;

    if( m_LastSelected3DShapeIndex >= (int) m_Shapes3D_list.size() )
    {
        wxMessageBox( wxT( "On3DShapeNameSelected() error" ) );
        m_LastSelected3DShapeIndex = -1;
        return;
    }
    Transfert3DValuesToDisplay( m_Shapes3D_list[m_LastSelected3DShapeIndex] );
}


void DIALOG_MODULE_BOARD_EDITOR::Add3DShape( wxCommandEvent& event )
{
    Browse3DLib( event );
}


void DIALOG_MODULE_BOARD_EDITOR::Remove3DShape( wxCommandEvent& event )
{
    if( m_LastSelected3DShapeIndex >= 0 )
        TransfertDisplayTo3DValues( m_LastSelected3DShapeIndex );

    int ii = m_3D_ShapeNameListBox->GetSelection();
    if( ii < 0 )
        return;

    m_Shapes3D_list.erase( m_Shapes3D_list.begin() + ii );
    m_3D_ShapeNameListBox->Delete( ii );

    if( m_3D_ShapeNameListBox->GetCount() == 0 )
        Transfert3DValuesToDisplay( NULL );
    else
    {
        m_LastSelected3DShapeIndex = 0;
        m_3D_ShapeNameListBox->SetSelection( m_LastSelected3DShapeIndex );
        Transfert3DValuesToDisplay(
            m_Shapes3D_list[m_LastSelected3DShapeIndex] );
    }
}


void DIALOG_MODULE_BOARD_EDITOR::Browse3DLib( wxCommandEvent& event )
{
    wxString fullfilename, shortfilename;
    wxString fullpath;
    wxString mask = wxT( "*" );

    fullpath = wxGetApp().ReturnLastVisitedLibraryPath( LIB3D_PATH );
    mask    += g_Shapes3DExtBuffer;
#ifdef __WINDOWS__
    fullpath.Replace( wxT( "/" ), wxT( "\\" ) );
#endif
    fullfilename = EDA_FileSelector( _( "3D Shape:" ),
                                     fullpath,
                                     wxEmptyString,
                                     g_Shapes3DExtBuffer,
                                     mask,
                                     this,
                                     wxFD_OPEN,
                                     TRUE
                                     );

    if( fullfilename == wxEmptyString )
        return;

    wxFileName fn = fullfilename;
    wxGetApp().SaveLastVisitedLibraryPath( fn.GetPath() );

    /* If the file path is already in the library search paths
     * list, just add the library name to the list.  Otherwise, add
     * the library name with the full or relative path.
     * the relative path, when possible is preferable,
     * because it preserve use of default libraries paths, when the path is a
     * sub path of these default paths
     */
    shortfilename =
        wxGetApp().ReturnFilenameWithRelativePathInLibPath( fullfilename );

    wxFileName aux = shortfilename;
    if( aux.IsAbsolute() )
    {   // Absolute path, ask if the user wants a relative one
        int diag = wxMessageBox(
            _( "Use a relative path?" ),
            _( "Path type" ),
            wxYES_NO | wxICON_QUESTION, this );

        if( diag == wxYES )
        {   // Make it relative
            aux.MakeRelativeTo( wxT(".") );
            shortfilename = aux.GetPathWithSep() + aux.GetFullName();
        }
    }

    S3D_MASTER* new3DShape = new S3D_MASTER( NULL );
    new3DShape->m_Shape3DName = shortfilename;
    m_Shapes3D_list.push_back( new3DShape );
    m_3D_ShapeNameListBox->Append( shortfilename );

    if( m_LastSelected3DShapeIndex >= 0 )
        TransfertDisplayTo3DValues( m_LastSelected3DShapeIndex );

    m_LastSelected3DShapeIndex = m_3D_ShapeNameListBox->GetCount() - 1;
    m_3D_ShapeNameListBox->SetSelection( m_LastSelected3DShapeIndex );
    Transfert3DValuesToDisplay( m_Shapes3D_list[m_LastSelected3DShapeIndex] );
}


void DIALOG_MODULE_BOARD_EDITOR::OnOkClick( wxCommandEvent& event )
{
    wxPoint  modpos;
    wxString msg;

    if( m_CurrentModule->m_Flags == 0 )       // this is a simple edition, we
                                              // must create an undo entry
        m_Parent->SaveCopyInUndoList( m_CurrentModule, UR_CHANGED );

    if( m_DC )
    {
        m_Parent->DrawPanel->CrossHairOff( m_DC );
        m_CurrentModule->Draw( m_Parent->DrawPanel, m_DC, GR_XOR );
    }

    // Initialize masks clearances
    m_CurrentModule->m_LocalClearance =
        ReturnValueFromTextCtrl( *m_NetClearanceValueCtrl, m_Parent->m_InternalUnits );
    m_CurrentModule->m_LocalSolderMaskMargin =
        ReturnValueFromTextCtrl( *m_SolderMaskMarginCtrl, m_Parent->m_InternalUnits );
    m_CurrentModule->m_LocalSolderPasteMargin =
        ReturnValueFromTextCtrl( *m_SolderPasteMarginCtrl, m_Parent->m_InternalUnits );
    double dtmp = 0.0;
    msg = m_SolderPasteMarginRatioCtrl->GetValue();
    msg.ToDouble( &dtmp );

    // A margin ratio de -50% means no paste on a pad, the ratio must be >= 50%
    if( dtmp < -50 )
        dtmp = -50;
    if( dtmp > +100 )
        dtmp = +100;
    m_CurrentModule->m_LocalSolderPasteMarginRatio = dtmp / 100;

    // Set Module Position
    modpos.x = ReturnValueFromTextCtrl( *m_ModPositionX, PCB_INTERNAL_UNIT );
    modpos.y = ReturnValueFromTextCtrl( *m_ModPositionY, PCB_INTERNAL_UNIT );
    m_CurrentModule->SetPosition( modpos );

    if( m_AutoPlaceCtrl->GetSelection() == 1 )
        m_CurrentModule->m_ModuleStatus |= MODULE_is_LOCKED;
    else
        m_CurrentModule->m_ModuleStatus &= ~MODULE_is_LOCKED;

    switch( m_AttributsCtrl->GetSelection() )
    {
    case 0:
        m_CurrentModule->m_Attributs = 0;
        break;

    case 1:
        m_CurrentModule->m_Attributs = MOD_CMS;
        break;

    case 2:
        m_CurrentModule->m_Attributs = MOD_VIRTUAL;
        break;
    }

    m_CurrentModule->m_CntRot90  = m_CostRot90Ctrl->GetValue();
    m_CurrentModule->m_CntRot180 = m_CostRot180Ctrl->GetValue();

    // Init Fields:
    m_CurrentModule->m_Reference->Copy( m_ReferenceCopy );
    m_CurrentModule->m_Value->Copy( m_ValueCopy );

    /* Now, set orientation. must be made after others changes,
     * because rotation changes fields positions on board according to the new orientation
     * (relative positions are not modified)
     */
    long orient = 0;
    msg = m_OrientValue->GetValue();
    msg.ToLong( &orient );
    if( m_CurrentModule->m_Orient != orient )
        m_CurrentModule->Rotate( m_CurrentModule->m_Pos,
                                 orient - m_CurrentModule->m_Orient );

    // Set component side, that also have effect on the fields positions on board
    bool change_layer = FALSE;
    if( m_LayerCtrl->GetSelection() == 0 )     // layer req = COMPONENT
    {
        if( m_CurrentModule->GetLayer() == LAYER_N_BACK )
            change_layer = TRUE;
    }
    else if( m_CurrentModule->GetLayer() == LAYER_N_FRONT )
        change_layer = TRUE;

    if( change_layer )
        m_CurrentModule->Flip( m_CurrentModule->m_Pos );

    /* Update 3D shape list */
    int         ii = m_3D_ShapeNameListBox->GetSelection();
    if( ii >= 0 )
        TransfertDisplayTo3DValues( ii  );
    S3D_MASTER* draw3D = m_CurrentModule->m_3D_Drawings;
    for( unsigned ii = 0; ii < m_Shapes3D_list.size(); ii++ )
    {
        S3D_MASTER* draw3DCopy = m_Shapes3D_list[ii];
        if( draw3DCopy->m_Shape3DName.IsEmpty() )
            continue;
        if( draw3D == NULL )
        {
            draw3D = new S3D_MASTER( draw3D );
            m_CurrentModule->m_3D_Drawings.Append( draw3D );
        }

        draw3D->m_Shape3DName = draw3DCopy->m_Shape3DName;
        draw3D->m_MatScale    = draw3DCopy->m_MatScale;
        draw3D->m_MatRotation = draw3DCopy->m_MatRotation;
        draw3D->m_MatPosition = draw3DCopy->m_MatPosition;

        draw3D = draw3D->Next();
    }

    // Remove old extra 3D shapes
    S3D_MASTER* nextdraw3D;
    for( ; draw3D != NULL; draw3D = nextdraw3D )
    {
        nextdraw3D = (S3D_MASTER*) draw3D->Next();
        delete m_CurrentModule->m_3D_Drawings.Remove( draw3D );
    }

    // Fill shape list with one void entry, if no entry
    if( m_CurrentModule->m_3D_Drawings == NULL )
        m_CurrentModule->m_3D_Drawings.PushBack( new S3D_MASTER( m_CurrentModule ) );


    m_CurrentModule->Set_Rectangle_Encadrement();

    m_Parent->OnModify();

    EndModal( 1 );

    if( m_DC )
    {
        m_CurrentModule->Draw( m_Parent->DrawPanel, m_DC, GR_OR );
        m_Parent->DrawPanel->CrossHairOn( m_DC );
    }
}


void DIALOG_MODULE_BOARD_EDITOR::OnEditReference( wxCommandEvent& event )
{
    wxPoint tmp = m_Parent->GetScreen()->GetCrossHairPosition();

    m_Parent->GetScreen()->SetCrossHairPosition( m_ReferenceCopy->m_Pos );
    m_ReferenceCopy->SetParent( m_CurrentModule );
    m_Parent->InstallTextModOptionsFrame( m_ReferenceCopy, NULL );
    m_Parent->GetScreen()->SetCrossHairPosition( tmp );
    m_ReferenceCtrl->SetValue( m_ReferenceCopy->m_Text );
}


void DIALOG_MODULE_BOARD_EDITOR::OnEditValue( wxCommandEvent& event )
{
    wxPoint tmp = m_Parent->GetScreen()->GetCrossHairPosition();

    m_Parent->GetScreen()->SetCrossHairPosition( m_ValueCopy->m_Pos );
    m_ValueCopy->SetParent( m_CurrentModule );
    m_Parent->InstallTextModOptionsFrame( m_ValueCopy, NULL );
    m_Parent->GetScreen()->SetCrossHairPosition( tmp );
    m_ValueCtrl->SetValue( m_ValueCopy->m_Text );
}