/////////////////////////////////////////////////////////////////////////////

// Name:        dialog_general_options.cpp
// Purpose:
// Author:      jean-pierre Charras
// Modified by:
// Created:     21/01/2006 18:28:47
// RCS-ID:
// Copyright:   License GNU
// Licence:
/////////////////////////////////////////////////////////////////////////////

// Generated by DialogBlocks (unregistered), 21/01/2006 18:28:47

#if defined (__GNUG__) && !defined (NO_GCC_PRAGMA)
#pragma implementation "dialog_general_options.h"
#endif

// For compilers that support precompilation, includes "wx/wx.h".
#include "wx/wxprec.h"

#ifdef __BORLANDC__
#pragma hdrstop
#endif

#ifndef WX_PRECOMP
#include "wx/wx.h"
#endif

////@begin includes
////@end includes
#include "fctsys.h"
#include "common.h"
#include "pcbnew.h"

#include "id.h"

#include "dialog_general_options.h"

////@begin XPM images
////@end XPM images


/*****************************************************************/
void WinEDA_PcbFrame::OnSelectOptionToolbar( wxCommandEvent& event )
/*****************************************************************/

/* Mises a jour de differentes variables de gestion d'options apres action sur
  * le toolbar d'options
 */
{
    int id = event.GetId();


    switch( id )
    {
    case ID_TB_OPTIONS_DRC_OFF:
        Drc_On = m_OptionsToolBar->GetToolState( id ) ? FALSE : TRUE;
        break;

    case ID_TB_OPTIONS_SHOW_GRID:
        m_Draw_Grid = g_ShowGrid = m_OptionsToolBar->GetToolState( id );
        DrawPanel->Refresh( );
        break;

    case ID_TB_OPTIONS_SHOW_RATSNEST:
        g_Show_Ratsnest = m_OptionsToolBar->GetToolState( id );
        {
        wxClientDC dc( DrawPanel );
        DrawPanel->PrepareGraphicContext( &dc );
        Ratsnest_On_Off( &dc );
        }
        break;

    case ID_TB_OPTIONS_SHOW_MODULE_RATSNEST:
        g_Show_Module_Ratsnest = m_OptionsToolBar->GetToolState( id );
        break;

    case ID_TB_OPTIONS_SELECT_UNIT_MM:
        g_UnitMetric = MILLIMETRE;

    case ID_TB_OPTIONS_SELECT_UNIT_INCH:
        if( id == ID_TB_OPTIONS_SELECT_UNIT_INCH )
            g_UnitMetric = INCHES;
        m_SelTrackWidthBox_Changed = TRUE;
        Affiche_Status_Box();    /* Reaffichage des coord curseur */
        ReCreateAuxiliaryToolbar();
        DisplayUnitsMsg();
        break;

    case ID_TB_OPTIONS_SHOW_POLAR_COORD:
        Affiche_Message( wxEmptyString );
        DisplayOpt.DisplayPolarCood = m_OptionsToolBar->GetToolState( id );
        Affiche_Status_Box();    /* Reaffichage des coord curseur */
        break;

    case ID_TB_OPTIONS_SELECT_CURSOR:
        g_CursorShape = m_OptionsToolBar->GetToolState( id );
        break;

    case ID_TB_OPTIONS_AUTO_DEL_TRACK:
        g_AutoDeleteOldTrack = m_OptionsToolBar->GetToolState( id );
        break;

    case ID_TB_OPTIONS_SHOW_ZONES:
        DisplayOpt.DisplayZonesMode = 0;
        DrawPanel->Refresh( );
        break;

    case ID_TB_OPTIONS_SHOW_ZONES_DISABLE:
        DisplayOpt.DisplayZonesMode = 1;
        DrawPanel->Refresh( );
        break;

    case ID_TB_OPTIONS_SHOW_ZONES_OUTLINES_ONLY:
        DisplayOpt.DisplayZonesMode = 2;
        DrawPanel->Refresh( );
        break;

    case ID_TB_OPTIONS_SHOW_PADS_SKETCH:
        m_DisplayPadFill = DisplayOpt.DisplayPadFill =
                               !m_OptionsToolBar->GetToolState( id );
        DrawPanel->Refresh( );
        break;

    case ID_TB_OPTIONS_SHOW_TRACKS_SKETCH:
        m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill =
                                    !m_OptionsToolBar->GetToolState( id );
        DrawPanel->Refresh( );
        break;

    case ID_TB_OPTIONS_SHOW_HIGHT_CONTRAST_MODE:
        DisplayOpt.ContrastModeDisplay =
            m_OptionsToolBar->GetToolState( id );
        DrawPanel->Refresh( );
        break;

    case ID_TB_OPTIONS_SHOW_EXTRA_VERTICAL_TOOLBAR1:
        if( m_OptionsToolBar->GetToolState( id ) )  // show aux V toolbar (Microwave tool)
            ReCreateAuxVToolbar();
        else
        {
            delete m_AuxVToolBar;
            m_AuxVToolBar = NULL;
        }
        {
            wxSizeEvent SizeEv( GetSize() );

            OnSize( SizeEv );
        }
        break;

    default:
        DisplayError( this,
            wxT( "WinEDA_PcbFrame::OnSelectOptionToolbar error \n (event not handled!)" ) );
        break;
    }

    SetToolbars();
}


/*!
 * WinEDA_PcbGeneralOptionsFrame type definition
 */

IMPLEMENT_DYNAMIC_CLASS( WinEDA_PcbGeneralOptionsFrame, wxDialog )

/*!
 * WinEDA_PcbGeneralOptionsFrame event table definition
 */

BEGIN_EVENT_TABLE( WinEDA_PcbGeneralOptionsFrame, wxDialog )

////@begin WinEDA_PcbGeneralOptionsFrame event table entries
EVT_BUTTON( wxID_OK, WinEDA_PcbGeneralOptionsFrame::OnOkClick )

EVT_BUTTON( wxID_CANCEL, WinEDA_PcbGeneralOptionsFrame::OnCancelClick )

////@end WinEDA_PcbGeneralOptionsFrame event table entries

END_EVENT_TABLE()

/*!
 * WinEDA_PcbGeneralOptionsFrame constructors
 */

WinEDA_PcbGeneralOptionsFrame::WinEDA_PcbGeneralOptionsFrame()
{
}


WinEDA_PcbGeneralOptionsFrame::WinEDA_PcbGeneralOptionsFrame( WinEDA_PcbFrame* parent,
                                                              wxDC* DC,
                                                              wxWindowID id,
                                                              const wxString& caption,
                                                              const wxPoint& pos,
                                                              const wxSize& size,
                                                              long style )
{
    m_Parent = parent;
    m_DC = DC;

    Create( parent, id, caption, pos, size, style );

    /* Set display options */
    m_PolarDisplay->SetSelection( DisplayOpt.DisplayPolarCood ? 1 : 0 );
    m_BoxUnits->SetSelection( g_UnitMetric ? 1 : 0 );
    m_CursorShape->SetSelection( g_CursorShape ? 1 : 0 );

    wxString timevalue;
    timevalue << g_TimeOut / 60;
    m_SaveTime->SetValue( timevalue );
    m_LayerNumber->SetValue( g_DesignSettings.m_CopperLayerCount );
    m_MaxShowLinks->SetValue( g_MaxLinksShowed );

    m_DrcOn->SetValue( Drc_On );
    m_ShowModuleRatsnest->SetValue( g_Show_Module_Ratsnest );
    m_ShowGlobalRatsnest->SetValue( g_Show_Ratsnest );
    m_TrackAutodel->SetValue( g_AutoDeleteOldTrack );
    m_Track_45_Only_Ctrl->SetValue( Track_45_Only );
    m_Segments_45_Only_Ctrl->SetValue( Segments_45_Only );
    m_AutoPANOpt->SetValue( m_Parent->DrawPanel->m_AutoPAN_Enable );
    m_Segments_45_Only_Ctrl->SetValue( Segments_45_Only );
    m_Track_DoubleSegm_Ctrl->SetValue( g_TwoSegmentTrackBuild );
}


/*!
 * WinEDA_PcbGeneralOptionsFrame creator
 */

bool WinEDA_PcbGeneralOptionsFrame::Create( wxWindow* parent,
                                            wxWindowID id,
                                            const wxString& caption,
                                            const wxPoint& pos,
                                            const wxSize& size,
                                            long style )
{
////@begin WinEDA_PcbGeneralOptionsFrame member initialisation
    m_PolarDisplay = NULL;
    m_BoxUnits     = NULL;
    m_CursorShape  = NULL;
    m_LayerNumber  = NULL;
    m_MaxShowLinks = NULL;
    m_SaveTime = NULL;
    m_DrcOn    = NULL;
    m_ShowGlobalRatsnest = NULL;
    m_ShowModuleRatsnest = NULL;
    m_TrackAutodel = NULL;
    m_Track_45_Only_Ctrl    = NULL;
    m_Segments_45_Only_Ctrl = NULL;
    m_AutoPANOpt = NULL;
    m_Track_DoubleSegm_Ctrl = NULL;
    m_MagneticPadOptCtrl    = NULL;
    m_MagneticTrackOptCtrl  = NULL;

////@end WinEDA_PcbGeneralOptionsFrame member initialisation

////@begin WinEDA_PcbGeneralOptionsFrame creation
    SetExtraStyle( wxWS_EX_BLOCK_EVENTS );
    wxDialog::Create( parent, id, caption, pos, size, style );

    CreateControls();
    if( GetSizer() )
    {
        GetSizer()->SetSizeHints( this );
    }
    Centre();

////@end WinEDA_PcbGeneralOptionsFrame creation
    SetFont( *g_DialogFont );
    return true;
}


/*!
 * Control creation for WinEDA_PcbGeneralOptionsFrame
 */

void WinEDA_PcbGeneralOptionsFrame::CreateControls()
{
////@begin WinEDA_PcbGeneralOptionsFrame content construction
    // Generated by DialogBlocks, Mon 03 Mar 2008 04:27:22 PM EST (unregistered)

    WinEDA_PcbGeneralOptionsFrame* itemDialog1 = this;

    wxBoxSizer* itemBoxSizer2 = new wxBoxSizer( wxHORIZONTAL );

    itemDialog1->SetSizer( itemBoxSizer2 );

    wxBoxSizer* itemBoxSizer3 = new wxBoxSizer( wxVERTICAL );

    itemBoxSizer2->Add( itemBoxSizer3, 0, wxGROW | wxALL, 5 );

    wxArrayString m_PolarDisplayStrings;
    m_PolarDisplayStrings.Add( _( "No Display" ) );
    m_PolarDisplayStrings.Add( _( "Display" ) );
    m_PolarDisplay = new wxRadioBox( itemDialog1, ID_RADIOBOX, _(
                                         "Display Polar Coord" ), wxDefaultPosition, wxDefaultSize,
                                     m_PolarDisplayStrings, 1,
                                     wxRA_SPECIFY_COLS );

    m_PolarDisplay->SetSelection( 0 );
    itemBoxSizer3->Add( m_PolarDisplay, 0, wxALIGN_LEFT | wxALL, 5 );

    wxArrayString m_BoxUnitsStrings;
    m_BoxUnitsStrings.Add( _( "Inches" ) );
    m_BoxUnitsStrings.Add( _( "millimeters" ) );
    m_BoxUnits = new wxRadioBox( itemDialog1, ID_RADIOBOX1, _(
                                     "Units" ), wxDefaultPosition, wxDefaultSize,
                                 m_BoxUnitsStrings, 1, wxRA_SPECIFY_COLS );

    m_BoxUnits->SetSelection( 0 );
    itemBoxSizer3->Add( m_BoxUnits, 0, wxALIGN_LEFT | wxALL, 5 );

    wxArrayString m_CursorShapeStrings;
    m_CursorShapeStrings.Add( _( "Small" ) );
    m_CursorShapeStrings.Add( _( "Big" ) );
    m_CursorShape = new                                 wxRadioBox( itemDialog1, ID_RADIOBOX2, _(
                                                                        "Cursor" ),
                                                                    wxDefaultPosition,
                                                                    wxDefaultSize, m_CursorShapeStrings, 1, wxRA_SPECIFY_COLS );

    m_CursorShape->SetSelection( 0 );
    itemBoxSizer3->Add( m_CursorShape, 0, wxALIGN_LEFT | wxALL, 5 );

    wxBoxSizer* itemBoxSizer7 = new                     wxBoxSizer( wxVERTICAL );

    itemBoxSizer2->Add( itemBoxSizer7, 0, wxGROW | wxALL, 5 );

    wxStaticBox*      itemStaticBoxSizer8Static = new   wxStaticBox( itemDialog1, wxID_ANY, _(
                                                                        "Number of Layers:" ) );

    wxStaticBoxSizer* itemStaticBoxSizer8 = new         wxStaticBoxSizer(
        itemStaticBoxSizer8Static,
                      wxVERTICAL );

    itemBoxSizer7->Add( itemStaticBoxSizer8, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 5 );

    m_LayerNumber = new                                 wxSpinCtrl( itemDialog1, ID_SPINCTRL1, _T(
                                                                        "1" ), wxDefaultPosition,
                                                                    wxDefaultSize, wxSP_ARROW_KEYS,
                                                                    1, 16, 1 );

    itemStaticBoxSizer8->Add( m_LayerNumber, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 5 );

    wxStaticBox*      itemStaticBoxSizer10Static = new  wxStaticBox( itemDialog1, wxID_ANY, _(
                                                                        "Max Links:" ) );

    wxStaticBoxSizer* itemStaticBoxSizer10 = new        wxStaticBoxSizer(
        itemStaticBoxSizer10Static,
                      wxVERTICAL );

    itemBoxSizer7->Add( itemStaticBoxSizer10, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 5 );

    m_MaxShowLinks = new                                wxSpinCtrl( itemDialog1, ID_SPINCTRL2, _T(
                                                                        "1" ), wxDefaultPosition,
                                                                    wxDefaultSize, wxSP_ARROW_KEYS,
                                                                    1, 5, 1 );

    itemStaticBoxSizer10->Add( m_MaxShowLinks, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 5 );

    wxStaticBox*      itemStaticBoxSizer12Static = new  wxStaticBox( itemDialog1, wxID_ANY, _(
                                                                        "Auto Save (minuts):" ) );

    wxStaticBoxSizer* itemStaticBoxSizer12 = new        wxStaticBoxSizer(
        itemStaticBoxSizer12Static,
                      wxVERTICAL );

    itemBoxSizer7->Add( itemStaticBoxSizer12, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 5 );

    m_SaveTime = new                                    wxSpinCtrl( itemDialog1, ID_SPINCTRL3, _T(
                                                                        "0" ), wxDefaultPosition,
                                                                    wxDefaultSize, wxSP_ARROW_KEYS,
                                                                    0, 60, 0 );

    itemStaticBoxSizer12->Add( m_SaveTime, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 5 );

    wxBoxSizer* itemBoxSizer14 = new                    wxBoxSizer( wxVERTICAL );

    itemBoxSizer2->Add( itemBoxSizer14, 0, wxGROW | wxALL, 5 );

    wxStaticBox*      itemStaticBoxSizer15Static = new  wxStaticBox( itemDialog1, wxID_ANY, _(
                                                                        "Options:" ) );

    wxStaticBoxSizer* itemStaticBoxSizer15 = new        wxStaticBoxSizer(
        itemStaticBoxSizer15Static,
                      wxVERTICAL );

    itemBoxSizer14->Add( itemStaticBoxSizer15, 0, wxALIGN_CENTER_HORIZONTAL | wxALL, 5 );

    m_DrcOn = new                                       wxCheckBox( itemDialog1, ID_CHECKBOX, _(
                                                                        "Drc ON" ),
                                                                    wxDefaultPosition,
                                                                    wxDefaultSize, wxCHK_2STATE );

    m_DrcOn->SetValue( false );
    m_DrcOn->SetForegroundColour( wxColour( 198, 0, 0 ) );
    itemStaticBoxSizer15->Add( m_DrcOn, 0, wxALIGN_LEFT | wxALL, 5 );

    m_ShowGlobalRatsnest = new      wxCheckBox( itemDialog1, ID_CHECKBOX1, _(
                                                    "Show Ratsnest" ), wxDefaultPosition,
                                                wxDefaultSize, wxCHK_2STATE );

    m_ShowGlobalRatsnest->SetValue( false );
    itemStaticBoxSizer15->Add( m_ShowGlobalRatsnest, 0, wxALIGN_LEFT | wxALL, 5 );

    m_ShowModuleRatsnest = new      wxCheckBox( itemDialog1, ID_CHECKBOX2, _(
                                                    "Show Mod Ratsnest" ), wxDefaultPosition,
                                                wxDefaultSize, wxCHK_2STATE );

    m_ShowModuleRatsnest->SetValue( false );
    itemStaticBoxSizer15->Add( m_ShowModuleRatsnest, 0, wxALIGN_LEFT | wxALL, 5 );

    m_TrackAutodel = new            wxCheckBox( itemDialog1, ID_CHECKBOX3, _(
                                                    "Tracks Auto Del" ), wxDefaultPosition,
                                                wxDefaultSize, wxCHK_2STATE );

    m_TrackAutodel->SetValue( false );
    itemStaticBoxSizer15->Add( m_TrackAutodel, 0, wxALIGN_LEFT | wxALL, 5 );

    m_Track_45_Only_Ctrl = new      wxCheckBox( itemDialog1, ID_CHECKBOX4, _(
                                                    "Track only 45 degrees" ), wxDefaultPosition,
                                                wxDefaultSize, wxCHK_2STATE );

    m_Track_45_Only_Ctrl->SetValue( false );
    itemStaticBoxSizer15->Add( m_Track_45_Only_Ctrl, 0, wxALIGN_LEFT | wxALL, 5 );

    m_Segments_45_Only_Ctrl = new   wxCheckBox( itemDialog1, ID_CHECKBOX5, _(
                                                    "Segments 45 Only" ), wxDefaultPosition,
                                                wxDefaultSize, wxCHK_2STATE );

    m_Segments_45_Only_Ctrl->SetValue( false );
    itemStaticBoxSizer15->Add( m_Segments_45_Only_Ctrl, 0, wxALIGN_LEFT | wxALL, 5 );

    m_AutoPANOpt = new              wxCheckBox( itemDialog1, ID_CHECKBOX6, _(
                                                    "Auto PAN" ), wxDefaultPosition, wxDefaultSize,
                                                wxCHK_2STATE );

    m_AutoPANOpt->SetValue( false );
    m_AutoPANOpt->SetForegroundColour( wxColour( 0, 0, 255 ) );
    itemStaticBoxSizer15->Add( m_AutoPANOpt, 0, wxALIGN_LEFT | wxALL, 5 );

    m_Track_DoubleSegm_Ctrl = new wxCheckBox( itemDialog1, ID_CHECKBOX7, _(
                                                  "Double Segm Track" ), wxDefaultPosition,
                                              wxDefaultSize, wxCHK_2STATE );

    m_Track_DoubleSegm_Ctrl->SetValue( false );
    m_Track_DoubleSegm_Ctrl->SetForegroundColour( wxColour( 0, 144, 0 ) );
    itemStaticBoxSizer15->Add( m_Track_DoubleSegm_Ctrl, 0, wxALIGN_LEFT | wxALL, 5 );

    wxBoxSizer* itemBoxSizer24 = new wxBoxSizer( wxVERTICAL );

    itemBoxSizer2->Add( itemBoxSizer24, 0, wxALIGN_TOP | wxALL, 5 );

    wxArrayString m_MagneticPadOptCtrlStrings;
    m_MagneticPadOptCtrlStrings.Add( _( "Never" ) );
    m_MagneticPadOptCtrlStrings.Add( _( "When creating tracks" ) );
    m_MagneticPadOptCtrlStrings.Add( _( "Always" ) );
    m_MagneticPadOptCtrl = new wxRadioBox( itemDialog1, ID_RADIOBOX4, _(
                                               "Magnetic Pads" ), wxDefaultPosition, wxDefaultSize,
                                           m_MagneticPadOptCtrlStrings, 1,
                                           wxRA_SPECIFY_COLS );

    m_MagneticPadOptCtrl->SetSelection( 0 );
    if( WinEDA_PcbGeneralOptionsFrame::ShowToolTips() )
        m_MagneticPadOptCtrl->SetToolTip( _(
                "control the capture of the pcb cursor when the mouse cursor enters a pad area" ) );
    itemBoxSizer24->Add( m_MagneticPadOptCtrl, 0, wxGROW | wxALL, 5 );

    wxArrayString m_MagneticTrackOptCtrlStrings;
    m_MagneticTrackOptCtrlStrings.Add( _( "Never" ) );
    m_MagneticTrackOptCtrlStrings.Add( _( "When creating tracks" ) );
    m_MagneticTrackOptCtrlStrings.Add( _( "Always" ) );
    m_MagneticTrackOptCtrl = new wxRadioBox( itemDialog1, ID_RADIOBOX3, _(
                                                 "Magnetic Tracks" ), wxDefaultPosition,
                                             wxDefaultSize, m_MagneticTrackOptCtrlStrings, 1,
                                             wxRA_SPECIFY_COLS );

    m_MagneticTrackOptCtrl->SetSelection( 0 );
    if( WinEDA_PcbGeneralOptionsFrame::ShowToolTips() )
        m_MagneticTrackOptCtrl->SetToolTip( _(
                "control the capture of the pcb cursor when the mouse cursor enters a track" ) );
    itemBoxSizer24->Add( m_MagneticTrackOptCtrl, 0, wxGROW | wxALL, 5 );

    wxButton* itemButton27 = new    wxButton( itemDialog1, wxID_OK, _(
                                                  "&OK" ), wxDefaultPosition, wxDefaultSize, 0 );

    itemButton27->SetForegroundColour( wxColour( 221, 0, 0 ) );
    itemBoxSizer24->Add( itemButton27, 0, wxGROW | wxALL, 5 );

    wxButton* itemButton28 = new    wxButton( itemDialog1, wxID_CANCEL, _(
                                                  "&Cancel" ), wxDefaultPosition, wxDefaultSize, 0 );

    itemButton28->SetForegroundColour( wxColour( 0, 0, 255 ) );
    itemBoxSizer24->Add( itemButton28, 0, wxGROW | wxALL, 5 );

    // Set validators
    m_MagneticPadOptCtrl->SetValidator( wxGenericValidator( &g_MagneticPadOption ) );
    m_MagneticTrackOptCtrl->SetValidator( wxGenericValidator( &g_MagneticTrackOption ) );

////@end WinEDA_PcbGeneralOptionsFrame content construction
}


/*!
 * Should we show tooltips?
 */

bool WinEDA_PcbGeneralOptionsFrame::ShowToolTips()
{
    return true;
}


/*!
 * Get bitmap resources
 */

wxBitmap WinEDA_PcbGeneralOptionsFrame::GetBitmapResource( const wxString& name )
{
    // Bitmap retrieval
////@begin WinEDA_PcbGeneralOptionsFrame bitmap retrieval
    wxUnusedVar( name );
    return wxNullBitmap;

////@end WinEDA_PcbGeneralOptionsFrame bitmap retrieval
}


/*!
 * Get icon resources
 */

wxIcon WinEDA_PcbGeneralOptionsFrame::GetIconResource( const wxString& name )
{
    // Icon retrieval
////@begin WinEDA_PcbGeneralOptionsFrame icon retrieval
    wxUnusedVar( name );
    return wxNullIcon;

////@end WinEDA_PcbGeneralOptionsFrame icon retrieval
}


/*!
 * wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_CANCEL
 */

void WinEDA_PcbGeneralOptionsFrame::OnCancelClick( wxCommandEvent& event )
{
////@begin wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_OK in WinEDA_PcbGeneralOptionsFrame.
    // Before editing this code, remove the block markers.
    event.Skip();

////@end wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_OK in WinEDA_PcbGeneralOptionsFrame.
}


/*!
 * wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_OK
 */

void WinEDA_PcbGeneralOptionsFrame::OnOkClick( wxCommandEvent& event )
{
    AcceptPcbOptions( event );

////@begin wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_OK in WinEDA_PcbGeneralOptionsFrame.
    // Before editing this code, remove the block markers.
    event.Skip();

////@end wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_OK in WinEDA_PcbGeneralOptionsFrame.
}


/**************************************************************************/
void WinEDA_PcbGeneralOptionsFrame::AcceptPcbOptions( wxCommandEvent& event )
/**************************************************************************/
{
    int ii;

    DisplayOpt.DisplayPolarCood =
        (m_PolarDisplay->GetSelection() == 0) ? FALSE : TRUE;
    ii = g_UnitMetric;
    g_UnitMetric = (m_BoxUnits->GetSelection() == 0)  ? 0 : 1;
    if( ii != g_UnitMetric )
        m_Parent->ReCreateAuxiliaryToolbar();

    g_CursorShape = m_CursorShape->GetSelection();
    g_TimeOut = 60 * m_SaveTime->GetValue();

    /* Mise a jour de la combobox d'affichage de la couche active */
    g_DesignSettings.m_CopperLayerCount = m_LayerNumber->GetValue();
    m_Parent->ReCreateLayerBox( NULL );

    g_MaxLinksShowed = m_MaxShowLinks->GetValue();
    Drc_On = m_DrcOn->GetValue();
    if( g_Show_Ratsnest != m_ShowGlobalRatsnest->GetValue() )
    {
        g_Show_Ratsnest = m_ShowGlobalRatsnest->GetValue();
        m_Parent->Ratsnest_On_Off( m_DC );
    }
    g_Show_Module_Ratsnest = m_ShowModuleRatsnest->GetValue();
    g_AutoDeleteOldTrack   = m_TrackAutodel->GetValue();
    Segments_45_Only = m_Segments_45_Only_Ctrl->GetValue();
    Track_45_Only    = m_Track_45_Only_Ctrl->GetValue();
    m_Parent->DrawPanel->m_AutoPAN_Enable = m_AutoPANOpt->GetValue();
    g_TwoSegmentTrackBuild = m_Track_DoubleSegm_Ctrl->GetValue();

    EndModal( 1 );
}


enum id_optpcb {
    ID_ACCEPT_OPT = 1000,
    ID_CANCEL_OPT
};

#include "dialog_track_options.cpp"
#include "dialog_display_options.cpp"
#include "dialog_graphic_items_options.cpp"

/*****************************************************************/
void WinEDA_PcbFrame::InstallPcbOptionsFrame( const wxPoint& pos,
                                              wxDC* DC, int id )
/*****************************************************************/
{
    switch( id )
    {
    case ID_PCB_TRACK_SIZE_SETUP:
        {
            WinEDA_PcbTracksDialog* OptionsFrame =
                new WinEDA_PcbTracksDialog( this );

            OptionsFrame->ShowModal();
            OptionsFrame->Destroy();
        }
        break;

    case ID_PCB_DRAWINGS_WIDTHS_SETUP:
        {
            WinEDA_GraphicItemsOptionsDialog* OptionsFrame =
                new WinEDA_GraphicItemsOptionsDialog( this );

            OptionsFrame->ShowModal();
            OptionsFrame->Destroy();
        }
        break;

    case ID_PCB_LOOK_SETUP:
        {
            WinEDA_DisplayOptionsDialog* OptionsFrame =
                new WinEDA_DisplayOptionsDialog( this );

            OptionsFrame->ShowModal();
            OptionsFrame->Destroy();
        }
        break;

    case ID_OPTIONS_SETUP:
        {
            WinEDA_PcbGeneralOptionsFrame* OptionsFrame =
                new WinEDA_PcbGeneralOptionsFrame( this, DC );

            OptionsFrame->ShowModal();
            OptionsFrame->Destroy();
        }
        break;
    }
}


/*******************************************************************/
void WinEDA_ModuleEditFrame::InstallOptionsFrame( const wxPoint& pos )
/*******************************************************************/
{
    WinEDA_GraphicItemsOptionsDialog OptionsFrame( this );

    OptionsFrame.ShowModal();
}