C++ 1 UTF-8 table dialog_track_options_base 1000 none 1 DialogTrackAndViasOptions . 1 1 0 1 0 wxID_ANY DIALOG_TRACKS_OPTIONS_BASE wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER Tracks and Vias Sizes OnInitDialog bMainSizer wxHORIZONTAL none 5 wxEXPAND 1 wxID_ANY Vias: sbLeftSizer wxVERTICAL none 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Via size m_ViaSizeTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_OptViaSize protected Enter the current via diameter. 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Default Via Drill m_ViaDefaultDrillValueTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_OptViaDrill protected Enter the default via drill diameter All vias drills not set to a specific drill value will have this drill value. 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Specific Via Drill m_ViaAltDrillValueTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_OptCustomViaDrill protected Use a specific drill value for all vias that must have a given drill value, and set the via hole to this specific drill value using the pop up menu. 5 wxALL 0 "Through Via" "Blind or Buried Via" 1 0 wxID_ANY Default Via Type 1 m_OptViaType protected 0 wxRA_SPECIFY_COLS Select the current via type. Trough via is the usual selection 5 wxEXPAND 1 wxID_ANY Micro Vias: sbMiddleLeftSizer wxVERTICAL none 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Micro Via Size m_MicroViaSizeTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_MicroViaSizeCtrl protected 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Micro Via Drill m_MicroViaDrillTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_MicroViaDrillCtrl protected 5 0 10 protected 10 5 wxALL 0 0 1 0 wxID_ANY Allows Micro Vias m_AllowMicroViaCtrl protected Allows use of micro vias They are very small vias only from an external copper layer to its near neightbour OnCheckboxAllowsMicroviaClick 5 wxEXPAND 1 wxID_ANY Dimensions: sbMiddleRightSizer wxVERTICAL none 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Track Width m_TrackWidthTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_OptTrackWidth protected Enter the current track width 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Clearance m_TrackClearanceTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_OptTrackClearance protected This is the clearance between tracks, vias and pads for DRC. 5 0 10 protected 10 5 wxTOP|wxRIGHT|wxLEFT 0 1 0 wxID_ANY Mask clearance m_MaskClearanceTitle protected -1 5 wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND 0 1 0 wxID_ANY 0 m_OptMaskMargin protected This is the clearance between pads and the mask 5 wxALIGN_CENTER_VERTICAL 0 bRightSizer wxVERTICAL none 5 wxALL 0 1 1 0 wxID_OK OK m_buttonOK protected OnButtonOkClick 5 wxALL 0 0 1 0 wxID_CANCEL Cancel m_buttonCANCEL protected OnButtonCancelClick