/***********************************************************/
/* wxPcbStruct.h */
/***********************************************************/
#ifndef WXPCB_STRUCT_H
#define WXPCB_STRUCT_H
#include "wxstruct.h"
#include "base_struct.h"
#include "param_config.h"
#ifndef PCB_INTERNAL_UNIT
#define PCB_INTERNAL_UNIT 10000
#endif
/* Forward declarations of classes. */
class PCB_SCREEN;
class WinEDA_Toolbar;
class WinEDA_ModuleEditFrame;
class BOARD;
class TEXTE_PCB;
class MODULE;
class TRACK;
class SEGZONE;
class SEGVIA;
class D_PAD;
class TEXTE_MODULE;
class MIREPCB;
class DIMENSION;
class EDGE_MODULE;
class WinEDA3D_DrawFrame;
class DRC;
class ZONE_CONTAINER;
class DRAWSEGMENT;
class GENERAL_COLLECTOR;
class GENERAL_COLLECTORS_GUIDE;
class PCB_LAYER_WIDGET;
/**
* @info see also class WinEDA_BasePcbFrame: Basic class for pcbnew and gerbview.
*/
/*****************************************************/
/* class WinEDA_PcbFrame: the main frame for Pcbnew */
/*****************************************************/
class WinEDA_PcbFrame : public WinEDA_BasePcbFrame
{
friend class PCB_LAYER_WIDGET;
protected:
PCB_LAYER_WIDGET* m_Layers;
DRC* m_drc; ///< the DRC controller, see drc.cpp
PARAM_CFG_ARRAY m_projectFileParams; ///< List of PCBNew project file settings.
PARAM_CFG_ARRAY m_configSettings; ///< List of PCBNew configuration settings.
wxString m_lastNetListRead; ///< Last net list read with relative path.
// we'll use lower case function names for private member functions.
void createPopUpMenuForZones( ZONE_CONTAINER* edge_zone, wxMenu* aPopMenu );
void createPopUpMenuForFootprints( MODULE* aModule, wxMenu* aPopMenu );
void createPopUpMenuForFpTexts( TEXTE_MODULE* aText, wxMenu* aPopMenu );
void createPopUpMenuForFpPads( D_PAD* aPad, wxMenu* aPopMenu );
void createPopupMenuForTracks( TRACK* aTrack, wxMenu* aPopMenu );
void createPopUpMenuForTexts( TEXTE_PCB* Text, wxMenu* menu );
void createPopUpBlockMenu( wxMenu* menu );
void createPopUpMenuForMarkers( MARKER_PCB* aMarker, wxMenu* aPopMenu );
/**
* Function setActiveLayer
* will change the currently active layer to \a aLayer and also
* update the PCB_LAYER_WIDGET.
*/
void setActiveLayer( int aLayer, bool doLayerWidgetUpdate = true )
{
( (PCB_SCREEN*) GetScreen() )->m_Active_Layer = aLayer;
if( doLayerWidgetUpdate )
syncLayerWidget();
}
/**
* Function getActiveLayer
* returns the active layer
*/
int getActiveLayer()
{
return ( (PCB_SCREEN*) GetScreen() )->m_Active_Layer;
}
/**
* Function syncLayerWidget
* updates the currently "selected" layer within the PCB_LAYER_WIDGET.
* The currently active layer is defined by the return value of getActiveLayer().
* <p>
* This function cannot be inline without including layer_widget.h in
* here and we do not want to do that.
*/
void syncLayerWidget( );
/**
* Function syncLayerBox
* updates the currently "selected" layer within m_SelLayerBox
* The currently active layer, as defined by the return value of
* getActiveLayer(). And updates the colored icon in the toolbar.
*/
void syncLayerBox();
public:
WinEDAChoiceBox* m_SelLayerBox; // a combo box to display and
// select active layer
WinEDAChoiceBox* m_SelTrackWidthBox; // a combo box to display and
// select current track width
WinEDAChoiceBox* m_SelViaSizeBox; // a combo box to display and
// select current via diameter
wxTextCtrl* m_ClearanceBox; // a text ctrl to display the
// current tracks and vias
// clearance
wxTextCtrl* m_NetClassSelectedBox; // a text ctrl to display the
// current NetClass
bool m_TrackAndViasSizesList_Changed;
bool m_show_microwave_tools;
bool m_show_layer_manager_tools;
public:
WinEDA_PcbFrame( wxWindow* father, const wxString& title,
const wxPoint& pos, const wxSize& size,
long style = KICAD_DEFAULT_DRAWFRAME_STYLE );
~WinEDA_PcbFrame();
void OnQuit( wxCommandEvent & WXUNUSED(event) );
/** Function ToPlotter
* Open a dialog frame to create plot and drill files
* relative to the current board
*/
void ToPlotter( wxCommandEvent& event );
/** function ToPrinter
* Install the print dialog
*/
void ToPrinter( wxCommandEvent& event );
/** Virtual function PrintPage
* used to print a page
* Print the page pointed by ActiveScreen, set by the calling print function
* @param aDC = wxDC given by the calling print function
* @param aPrint_Sheet_Ref = true to print page references
* @param aPrintMask = not used here
* @param aPrintMirrorMode = not used here (Set when printing in mirror mode)
* @param aData = a pointer on an auxiliary data (NULL if not used)
*/
virtual void PrintPage( wxDC* aDC, bool aPrint_Sheet_Ref,
int aPrintMask, bool aPrintMirrorMode,
void * aData = NULL );
void GetKicadAbout( wxCommandEvent& event );
/** Function IsGridVisible() , virtual
* @return true if the grid must be shown
*/
virtual bool IsGridVisible();
/** Function SetGridVisibility() , virtual
* It may be overloaded by derived classes
* if you want to store/retrieve the grid visibility in configuration.
* @param aVisible = true if the grid must be shown
*/
virtual void SetGridVisibility(bool aVisible);
/** Function GetGridColor() , virtual
* @return the color of the grid
*/
virtual int GetGridColor();
/** Function SetGridColor() , virtual
* @param aColor = the new color of the grid
*/
virtual void SetGridColor(int aColor);
// Configurations:
void InstallConfigFrame( const wxPoint& pos );
void Process_Config( wxCommandEvent& event );
PARAM_CFG_ARRAY& GetProjectFileParameters();
void SaveProjectSettings();
/**
* Load the project file configuration settings.
*
* @param aProjectFileName = The project filename.
* if not found use kicad.pro and initialize default values
* @return always returns true.
*/
bool LoadProjectSettings( const wxString& aProjectFileName );
/**
* Get the list of application specific settings.
*
* @return - Reference to the list of applications settings.
*/
PARAM_CFG_ARRAY& GetConfigurationSettings();
/**
* Load applications settings specific to PCBNew.
*
* This overrides the base class WinEDA_BasePcbFrame::LoadSettings() to
* handle settings specific common to the PCB layout application. It
* calls down to the base class to load settings common to all PCB type
* drawing frames. Please put your application settings for PCBNew here
* to avoid having application settings loaded all over the place.
*/
virtual void LoadSettings();
/**
* Save applications settings common to PCBNew.
*
* This overrides the base class WinEDA_BasePcbFrame::SaveSettings() to
* save settings specific to the PCB layout application main window. It
* calls down to the base class to save settings common to all PCB type
* drawing frames. Please put your application settings for PCBNew here
* to avoid having application settings saved all over the place.
*/
virtual void SaveSettings();
/**
* Get the last net list read with the net list dialog box.
*
* @return - Absolute path and file name of the last net list file successfully read.
*/
wxString GetLastNetListRead();
/**
* Set the last net list successfully read by the net list dialog box.
*
* Note: the file path is converted to a path relative to the project file path. If
* the path cannot be made relative, than m_lastNetListRead is set to and empty
* string. This could happen when the net list file is on a different drive than
* the project file. The advantage of relative paths is that is more likely to
* work when opening the same project from both Windows and Linux.
*
* @param aNetListFile - The last net list file with full path successfully read.
*/
void SetLastNetListRead( const wxString& aNetListFile );
void OnHotKey( wxDC* DC,
int hotkey,
EDA_BaseStruct* DrawStruct );
bool OnHotkeyDeleteItem( wxDC* DC, EDA_BaseStruct* DrawStruct );
void OnCloseWindow( wxCloseEvent& Event );
void Process_Special_Functions( wxCommandEvent& event );
void Tracks_and_Vias_Size_Event( wxCommandEvent& event );
void ProcessMuWaveFunctions( wxCommandEvent& event );
void MuWaveCommand( wxDC* DC, const wxPoint& MousePos );
void RedrawActiveWindow( wxDC* DC, bool EraseBg );
void ReCreateHToolbar();
void ReCreateAuxiliaryToolbar();
void ReCreateVToolbar();
void ReCreateAuxVToolbar();
void ReCreateOptToolbar();
void ReCreateMenuBar();
WinEDAChoiceBox* ReCreateLayerBox( WinEDA_Toolbar* parent );
/** Virtual Function OnModify()
* Must be called after a board change
* in order to set the "modify" flag of the current screen
* and prepare, if needed the refresh of the 3D frame showing the footprint
* do not forget to call the basic OnModify function to update auxiliary info
*/
virtual void OnModify( );
/**
* Function IsElementVisible
* tests whether a given element category is visible. Keep this as an
* inline function.
* @param aPCB_VISIBLE is from the enum by the same name
* @return bool - true if the element is visible.
* @see enum PCB_VISIBLE
*/
bool IsElementVisible( int aPCB_VISIBLE )
{
return GetBoard()->IsElementVisible( aPCB_VISIBLE );
}
/**
* Function SetElementVisibility
* changes the visibility of an element category
* @param aPCB_VISIBLE is from the enum by the same name
* @param aNewState = The new visibility state of the element category
* @see enum PCB_VISIBLE
*/
void SetElementVisibility( int aPCB_VISIBLE, bool aNewState );
/**
* Function SetVisibleAlls
* Set the status of all visible element categories and layers to VISIBLE
*/
void SetVisibleAlls( );
/**
* Function ReFillLayerWidget
* changes out all the layers in m_Layers and may be called upon
* loading a new BOARD.
*/
void ReFillLayerWidget();
void Show3D_Frame( wxCommandEvent& event );
void GeneralControle( wxDC* DC, wxPoint Mouse );
/** function ShowDesignRulesEditor
* Display the Design Rules Editor.
*/
void ShowDesignRulesEditor( wxCommandEvent& event );
/* toolbars update UI functions: */
void PrepareLayerIndicator();
/**
* Function AuxiliaryToolBar_Update_UI
* update the displayed values on auxiliary horizontal toolbar
* (track width, via sizes, clearance ...
*/
void AuxiliaryToolBar_Update_UI();
/**
* Function AuxiliaryToolBar_DesignRules_Update_UI
* update the displayed values: track width, via sizes, clearance
* used when a new netclass is selected
*/
void AuxiliaryToolBar_DesignRules_Update_UI();
/* mouse functions events: */
void OnLeftClick( wxDC* DC, const wxPoint& MousePos );
void OnLeftDClick( wxDC* DC, const wxPoint& MousePos );
/**
* Function OnRightClick
* populates a popup menu with the choices appropriate for the current
*context.
* The caller will add the ZOOM menu choices afterward.
* @param aMousePos The current mouse position
* @param aPopMenu The menu to add to.
*/
bool OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu );
void OnSelectOptionToolbar( wxCommandEvent& event );
void ToolOnRightClick( wxCommandEvent& event );
/** Function SaveCopyInUndoList.
* Creates a new entry in undo list of commands.
* add a picker to handle aItemToCopy
* @param aItemToCopy = the board item modified by the command to undo
* @param aTypeCommand = command type (see enum UndoRedoOpType)
* @param aTransformPoint = the reference point of the transformation, for
*commands like move
*/
virtual void SaveCopyInUndoList( BOARD_ITEM* aItemToCopy,
UndoRedoOpType aTypeCommand,
const wxPoint& aTransformPoint =
wxPoint( 0, 0 ) );
/** Function SaveCopyInUndoList (overloaded).
* Creates a new entry in undo list of commands.
* add a list of pickers to handle a list of items
* @param aItemsList = the list of items modified by the command to undo
* @param aTypeCommand = command type (see enum UndoRedoOpType)
* @param aTransformPoint = the reference point of the transformation, for
*commands like move
*/
virtual void SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
UndoRedoOpType aTypeCommand,
const wxPoint& aTransformPoint =
wxPoint( 0, 0 ) );
/** Function PutDataInPreviousState()
* Used in undo or redo command.
* Put data pointed by List in the previous state, i.e. the state memorized
* by List
* @param aList = a PICKED_ITEMS_LIST pointer to the list of items to
* undo/redo
* @param aRedoCommand = a bool: true for redo, false for undo
* @param aRebuildRatsnet = a bool: true to rebuild ratsnet (normal use),
* false
* to just retrieve last state (used in abort commands that do not need to
* rebuild ratsnest)
*/
void PutDataInPreviousState( PICKED_ITEMS_LIST* aList,
bool aRedoCommand,
bool aRebuildRatsnet = true );
/** Function GetBoardFromRedoList
* Redo the last edition:
* - Save the current board in Undo list
* - Get an old version of the board from Redo list
* @return none
*/
void GetBoardFromRedoList( wxCommandEvent& event );
/** Function GetBoardFromUndoList
* Undo the last edition:
* - Save the current board in Redo list
* - Get an old version of the board from Undo list
* @return none
*/
void GetBoardFromUndoList( wxCommandEvent& event );
/* Block operations: */
int ReturnBlockCommand( int key );
void HandleBlockPlace( wxDC* DC );
int HandleBlockEnd( wxDC* DC );
/**
* Function Block_SelectItems
* Uses GetScreen()->m_BlockLocate
* select items within the selected block.
* selected items are put in the pick list
* @param none
*/
void Block_SelectItems();
/**
* Function Block_Delete
* deletes all items within the selected block.
* @param none
*/
void Block_Delete();
/**
* Function Block_Rotate
* Rotate all items within the selected block.
* The rotation center is the center of the block
* @param none
*/
void Block_Rotate();
/**
* Function Block_Flip
* Flip items within the selected block.
* The flip center is the center of the block
* @param none
*/
void Block_Flip();
/**
* Function Block_Move
* move all items within the selected block.
* New location is determined by the current offset from the selected
*block's original location.
* @param none
*/
void Block_Move();
/**
* Function Block_Mirror_X
* mirrors all items within the currently selected block in the X axis.
* @param none
*/
void Block_Mirror_X();
/**
* Function Block_Duplicate
* Duplicate all items within the selected block.
* New location is determined by the current offset from the selected
* block's original location.
* @param none
*/
void Block_Duplicate();
void SetToolbars();
void Process_Settings( wxCommandEvent& event );
void OnConfigurePcbOptions( wxCommandEvent& aEvent );
void InstallDisplayOptionsDialog( wxCommandEvent& aEvent );
void InstallPcbGlobalDeleteFrame( const wxPoint& pos );
void GenModulesPosition( wxCommandEvent& event );
void GenModuleReport( wxCommandEvent& event );
void InstallDrillFrame( wxCommandEvent& event );
void ToPostProcess( wxCommandEvent& event );
void OnFileHistory( wxCommandEvent& event );
void Files_io( wxCommandEvent& event );
bool LoadOnePcbFile( const wxString& FileName, bool Append );
/**
* Function ReadPcbFile
* reads a board file <file>.brd
* @param Append if 0: a previously loaded board is deleted before loading
* the file else all items of the board file are added to the
* existing board
*/
int ReadPcbFile( FILE* File, bool Append );
bool SavePcbFile( const wxString& FileName );
int SavePcbFormatAscii( FILE* File );
bool WriteGeneralDescrPcb( FILE* File );
// BOARD handling
/** function Clear_Pcb()
* delete all and reinitialize the current board
* @param aQuery = true to prompt user for confirmation, false to
* initialize silently
*/
bool Clear_Pcb( bool aQuery );
// Drc control
/* function GetDrcController
* @return the DRC controller
*/
DRC* GetDrcController() { return m_drc; }
/**
* Function RecreateBOMFileFromBoard
* Recreates a .cmp file from the current loaded board
* this is the same as created by cvpcb.
* can be used if this file is lost
*/
void RecreateCmpFileFromBoard( wxCommandEvent& aEvent );
/**
* Function RecreateBOMFileFromBoard
* Creates a BOM file from the current loaded board
*/
void RecreateBOMFileFromBoard( wxCommandEvent& aEvent );
void ExportToGenCAD( wxCommandEvent& event );
/**
* Function OnExportVRML
* will export the current BOARD to a VRML file.
*/
void OnExportVRML( wxCommandEvent& event );
/**
* Function ExportVRML_File
* Creates the file(s) exporting current BOARD to a VRML file.
* @param aFullFileName = the full filename of the file to create
* @param aScale = the general scaling factor. 1.0 to export in inches
* @param aExport3DFiles = true to copy 3D shapes in the subir a3D_Subdir
* @param a3D_Subdir = sub directory where 3D sahpes files are copied
* used only when aExport3DFiles == true
* @return true if Ok.
*/
bool ExportVRML_File( const wxString & aFullFileName, double aScale,
bool aExport3DFiles, const wxString & a3D_Subdir );
/**
* Function ExporttoSPECCTRA
* will export the current BOARD to a specctra dsn file. See
* See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the
* specification.
*/
void ExportToSpecctra( wxCommandEvent& event );
/**
* Function ImportSpecctraSession
* will import a specctra *.ses file and use it to relocate MODULEs and
* to replace all vias and tracks in an existing and loaded BOARD.
* See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the
* specification.
*/
void ImportSpecctraSession( wxCommandEvent& event );
/**
* Function ImportSpecctraDesign
* will import a specctra *.dsn file and use it to replace an entire BOARD.
* The new board will not have any graphics, only components, tracks and
* vias.
* See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the
* specification.
*/
void ImportSpecctraDesign( wxCommandEvent& event );
/**
* Function Access_to_External_Tool
* Run an external tool (like freeroute )
*/
void Access_to_External_Tool( wxCommandEvent& event );
MODULE* ListAndSelectModuleName();
/** Function ListNetsAndSelect
* called by a command event
* displays the sorted list of nets in a dialog frame
* If a net is selected, it is highlighted
*/
void ListNetsAndSelect( wxCommandEvent& event );
void Swap_Layers( wxCommandEvent& event );
void Install_Test_DRC_Frame( wxDC* DC );
// Handling texts on the board
void Rotate_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
TEXTE_PCB* Create_Texte_Pcb( wxDC* DC );
void Delete_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
void StartMoveTextePcb( TEXTE_PCB* TextePcb, wxDC* DC );
void Place_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
void InstallTextPCBOptionsFrame( TEXTE_PCB* TextPCB, wxDC* DC );
// Graphic Segments type DRAWSEGMENT
void Start_Move_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC );
void Place_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC );
void InstallGraphicItemPropertiesDialog( DRAWSEGMENT* aItem,
wxDC* aDC );
// Footprint edition (see also WinEDA_BasePcbFrame)
void InstallModuleOptionsFrame( MODULE* Module, wxDC* DC );
void StartMove_Module( MODULE* module, wxDC* DC );
bool Delete_Module( MODULE* module,
wxDC* DC,
bool aAskBeforeDeleting );
void Change_Side_Module( MODULE* Module, wxDC* DC );
void InstallExchangeModuleFrame( MODULE* ExchangeModuleModule );
/** function Exchange_Module
* Replaces OldModule by NewModule, using OldModule settings:
* position, orientation, pad netnames ...)
* OldModule is deleted or put in undo list.
* @param aOldModule = footprint to replace
* @param aNewModule = footprint to put
* @param aUndoPickList = the undo list used to save OldModule. If null,
* OldModule is deleted
*/
void Exchange_Module( MODULE* aOldModule,
MODULE* aNewModule,
PICKED_ITEMS_LIST* aUndoPickList );
// loading modules: see WinEDA_BasePcbFrame
// Board handling
void RemoveStruct( BOARD_ITEM* Item, wxDC* DC );
// Highlight functions:
int Select_High_Light( wxDC* DC );
void High_Light( wxDC* DC );
// Track and via edition:
void Via_Edit_Control( wxCommandEvent& event );
/* Return true if a microvia can be put on board
* A microvia is a small via restricted to 2 near neighbor layers
* because its is hole is made by laser which can penetrate only one layer
* It is mainly used to connect BGA to the first inner layer
* And it is allowed from an external layer to the first inner layer
*/
bool IsMicroViaAcceptable( void );
/**
* Function Other_Layer_Route
* operates in one of two ways. If argument track is NULL, then swap the
* active layer between m_Route_Layer_TOP and m_Route_Layer_BOTTOM. If a
* track is in progress (track is not NULL), and if DRC allows it, place
* a via on the end of the current track, and then swap the current active
* layer and start a new segment on the new layer.
* @param track A TRACK* to append the via to or NULL.
* @param DC A device context to draw on.
* @return bool - true if the operation was successful, else false such as
* the case where DRC would not allow a via.
*/
bool Other_Layer_Route( TRACK* track, wxDC* DC );
void Affiche_PadsNoConnect( wxDC* DC );
void Affiche_Status_Net( wxDC* DC );
TRACK* Delete_Segment( wxDC* DC, TRACK* Track );
void Delete_Track( wxDC* DC, TRACK* Track );
void Delete_net( wxDC* DC, TRACK* Track );
void Remove_One_Track( wxDC* DC, TRACK* pt_segm );
/** function Reset_All_Tracks_And_Vias_To_Netclass_Values
* Reset all tracks width and/or vias diameters and drill
* to their default Netclass value
* @param aTrack : bool true to modify tracks
* @param aVia : bool true to modify vias
*/
bool Reset_All_Tracks_And_Vias_To_Netclass_Values( bool aTrack,
bool aVia );
/** function Change_Net_Tracks_And_Vias_Sizes
* Reset all tracks width and vias diameters and drill
* to their default Netclass value or current values
* @param aNetcode : the netcode of the net to edit
* @param aUseNetclassValue : bool. True to use netclass values, false to
* use current values
*/
bool Change_Net_Tracks_And_Vias_Sizes( int aNetcode,
bool aUseNetclassValue );
/** Function Edit_Track_Width
* Modify a full track width (using DRC control).
* a full track is the set of track segments between 2 ends: pads or a
* point that has more than 2 segments ends connected
* @param DC = the curred device context (can be NULL)
* @param aTrackSegment = a segment or via on the track to change
*/
void Edit_Track_Width( wxDC* DC, TRACK* Track );
/** Function Edit_TrackSegm_Width
* Modify one track segment width or one via diameter (using DRC control).
* @param DC = the current device context (can be NULL)
* @param aTrackItem = the track segment or via to modify
*/
void Edit_TrackSegm_Width( wxDC* DC, TRACK* segm );
TRACK* Begin_Route( TRACK* track, wxDC* DC );
void End_Route( TRACK* track, wxDC* DC );
void ExChange_Track_Layer( TRACK* pt_segm, wxDC* DC );
void Attribut_Segment( TRACK* track, wxDC* DC, bool Flag_On );
void Attribut_Track( TRACK* track, wxDC* DC, bool Flag_On );
void Attribut_net( wxDC* DC, int net_code, bool Flag_On );
void Start_MoveOneNodeOrSegment( TRACK* track, wxDC* DC, int command );
bool PlaceDraggedOrMovedTrackSegment( TRACK* Track, wxDC* DC );
bool MergeCollinearTracks( TRACK* track, wxDC* DC, int end );
void Start_DragTrackSegmentAndKeepSlope( TRACK* track, wxDC* DC );
void SwitchLayer( wxDC* DC, int layer );
bool Add_45_degrees_Segment( wxDC* DC );
bool Genere_Pad_Connexion( wxDC* DC, int layer );
/** function EraseRedundantTrack
* Called after creating a track
* Remove (if exists) the old track that have the same starting and the
* same ending point as the new created track
* (this is the redunding track)
* @param aDC = the current device context (can be NULL)
* @param aNewTrack = the new created track (a pointer to a segment of the
* track list)
* @param aNewTrackSegmentsCount = number of segments in this new track
* @param aItemsListPicker = the list picker to use for an undo command
* (can be NULL)
*/
int EraseRedundantTrack( wxDC* aDC,
TRACK* aNewTrack,
int aNewTrackSegmentsCount,
PICKED_ITEMS_LIST* aItemsListPicker );
/** Function SetTrackSegmentWidth
* Modify one track segment width or one via diameter (using DRC control).
* Basic routine used by other routines when editing tracks or vias
* @param aTrackItem = the track segment or via to modify
* @param aItemsListPicker = the list picker to use for an undo command
* (can be NULL)
* @param aUseNetclassValue = true to use NetClass value, false to use
* current designSettings value
* @return true if done, false if no not change (because DRC error)
*/
bool SetTrackSegmentWidth( TRACK* aTrackItem,
PICKED_ITEMS_LIST* aItemsListPicker,
bool aUseNetclassValue );
// zone handling
/** Function Delete_Zone_Fill
* Remove the zone filling which include the segment aZone, or the zone
* which have the given time stamp. A zone is a group of segments which
* have the same TimeStamp
* @param aZone = zone segment within the zone to delete. Can be NULL
* @param aTimestamp = Timestamp for the zone to delete, used if aZone ==
* NULL
*/
void Delete_Zone_Fill( SEGZONE* Track, long aTimestamp = 0 );
/** Function Delete_LastCreatedCorner
* Used only while creating a new zone outline
* Remove and delete the current outline segment in progress
* @return 0 if no corner in list, or corner number
*/
int Delete_LastCreatedCorner( wxDC* DC );
/**
* Function Begin_Zone
* initiates a zone edge creation process,
* or terminates the current zone edge and creates a new zone edge stub
*/
int Begin_Zone( wxDC* DC );
/**
* Function End_Zone
* terminates (if no DRC error ) the zone edge creation process
* @param DC = current Device Context
* @return true if Ok, false if DRC error
*/
bool End_Zone( wxDC* DC );
/** Function Fill_Zone()
* Calculate the zone filling for the outline zone_container
* The zone outline is a frontier, and can be complex (with holes)
* The filling starts from starting points like pads, tracks.
* If exists the old filling is removed
* @param zone_container = zone to fill
* @param verbose = true to show error messages
* @return error level (0 = no error)
*/
int Fill_Zone( ZONE_CONTAINER* zone_container, bool verbose = TRUE );
/** Function Fill_All_Zones()
* Fill all zones on the board
* The old fillings are removed
* @param verbose = true to show error messages
* @return error level (0 = no error)
*/
int Fill_All_Zones( bool verbose = TRUE );
/**
* Function Add_Zone_Cutout
* Add a cutout zone to a given zone outline
* @param DC = current Device Context
* @param zone_container = parent zone outline
*/
void Add_Zone_Cutout( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Add_Similar_Zone
* Add a zone to a given zone outline.
* if the zones are overlapping they will be merged
* @param DC = current Device Context
* @param zone_container = parent zone outline
*/
void Add_Similar_Zone( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Edit_Zone_Params
* Edit params (layer, clearance, ...) for a zone outline
*/
void Edit_Zone_Params( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Start_Move_Zone_Corner
* Prepares a move corner in a zone outline,
* called from a move corner command (IsNewCorner = false),
* or a create new cornet command (IsNewCorner = true )
*/
void Start_Move_Zone_Corner( wxDC* DC,
ZONE_CONTAINER* zone_container,
int corner_id,
bool IsNewCorner );
/**
* Function Start_Move_Zone_Corner
* Prepares a drag edge in an existing zone outline,
*/
void Start_Move_Zone_Drag_Outline_Edge(
wxDC* DC,
ZONE_CONTAINER*
zone_container,
int corner_id );
/**
* Function End_Move_Zone_Corner_Or_Outlines
* Terminates a move corner in a zone outline, or a move zone outlines
* @param DC = current Device Context (can be NULL)
* @param zone_container: the given zone
*/
void End_Move_Zone_Corner_Or_Outlines(
wxDC* DC,
ZONE_CONTAINER*
zone_container );
/**
* Function End_Move_Zone_Corner_Or_Outlines
* Remove the currently selected corner in a zone outline
* the .m_CornerSelection is used as corner selection
*/
void Remove_Zone_Corner( wxDC* DC, ZONE_CONTAINER* zone_container );
/** Function Delete_Zone
* Remove the zone which include the segment aZone, or the zone which have
* the given time stamp. A zone is a group of segments which have the
* same TimeStamp
* @param DC = current Device Context (can be NULL)
* @param zone_container = zone to modify
* the member .m_CornerSelection is used to find the outline to remove.
* if the outline is the main outline, all the zone is removed
* otherwise, the hole is deleted
*/
void Delete_Zone_Contour( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Start_Move_Zone_Outlines
* Initialize parameters to move an existing zone outlines.
* @param DC = current Device Context (can be NULL)
* @param zone_container: the given zone to move
*/
void Start_Move_Zone_Outlines( wxDC* DC,
ZONE_CONTAINER* zone_container );
// Target handling
MIREPCB* Create_Mire( wxDC* DC );
void Delete_Mire( MIREPCB* MirePcb, wxDC* DC );
void StartMove_Mire( MIREPCB* MirePcb, wxDC* DC );
void Place_Mire( MIREPCB* MirePcb, wxDC* DC );
void InstallMireOptionsFrame( MIREPCB* MirePcb,
wxDC* DC,
const wxPoint& pos );
// Graphic segments type DRAWSEGMENT handling:
DRAWSEGMENT* Begin_DrawSegment( DRAWSEGMENT* Segment, int shape, wxDC* DC );
void End_Edge( DRAWSEGMENT* Segment, wxDC* DC );
void Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC );
void Delete_Drawings_All_Layer( int aLayer );
// Dimension handling:
void Install_Edit_Dimension( DIMENSION* Dimension,
wxDC* DC,
const wxPoint& pos );
DIMENSION* Begin_Dimension( DIMENSION* Dimension, wxDC* DC );
void Delete_Dimension( DIMENSION* Dimension, wxDC* DC );
// netlist handling:
void InstallNetlistFrame( wxDC* DC, const wxPoint& pos );
/** Function ReadPcbNetlist
* Update footprints (load missing footprints and delete on request extra
* footprints)
* Update connectivity info ( Net Name list )
* Update Reference, value and "TIME STAMP"
* @param aNetlistFullFilename = netlist file name (*.net)
* @param aCmpFullFileName = cmp/footprint list file name (*.cmp) if not found,
* only the netlist will be used
* @return true if Ok
*
* the format of the netlist is something like:
# EESchema Netlist Version 1.0 generee le 18/5/2005-12:30:22
* (
* ( 40C08647 $noname R20 4,7K {Lib=R}
* ( 1 VCC )
* ( 2 MODB_1 )
* )
* ( 40C0863F $noname R18 4,7_k {Lib=R}
* ( 1 VCC )
* ( 2 MODA_1 )
* )
* }
* #End
*/
bool ReadPcbNetlist(
const wxString& aNetlistFullFilename,
const wxString& aCmpFullFileName,
wxTextCtrl* aMessageWindow,
bool aChangeFootprint,
bool aDeleteBadTracks,
bool aDeleteExtraFootprints,
bool aSelect_By_Timestamp );
/** Function RemoveMisConnectedTracks
* finds all track segments which are mis-connected (to more than one net).
* When such a bad segment is found, mark it as needing to be removed.
* and remove all tracks having at least one flagged segment.
* @param aDC = the current device context (can be NULL)
* @param aDisplayActivity = true to display activity on the frame status bar and message panel
* @return true if any change is made
*/
bool RemoveMisConnectedTracks( wxDC* aDC, bool aDisplayActivity );
// Autoplacement:
void AutoPlace( wxCommandEvent& event );
/** function OnOrientFootprints
* install the dialog box for the common Orient Footprints
*/
void OnOrientFootprints( void );
/** function ReOrientModules
* Set the orientation of footprints
* @param ModuleMask = mask (wildcard allowed) selection
* @param Orient = new orientation
* @param include_fixe = true to orient locked footprints
*/
void ReOrientModules( const wxString& ModuleMask, int Orient,
bool include_fixe );
void FixeModule( MODULE* Module, bool Fixe );
void AutoMoveModulesOnPcb( bool PlaceModulesHorsPcb );
bool SetBoardBoundaryBoxFromEdgesOnly();
void AutoPlaceModule( MODULE* Module, int place_mode, wxDC* DC );
int RecherchePlacementModule( MODULE* Module, wxDC* DC );
void GenModuleOnBoard( MODULE* Module );
float Compute_Ratsnest_PlaceModule( wxDC* DC );
int GenPlaceBoard();
void DrawInfoPlace( wxDC* DC );
// Autorouting:
int Solve( wxDC* DC, int two_sides );
void Reset_Noroutable( wxDC* DC );
void Autoroute( wxDC* DC, int mode );
void ReadAutoroutedTracks( wxDC* DC );
void GlobalRoute( wxDC* DC );
void Show_1_Ratsnest( EDA_BaseStruct* item, wxDC* DC );
void Clean_Pcb( wxDC* DC );
void InstallFindFrame( const wxPoint& pos, wxDC* DC );
/**
* Function SendMessageToEESCHEMA
* sends a message to the schematic editor so that it may move its cursor
* to a part with the same reference as the objectToSync
* @param objectToSync The object whose reference is used to synchronize
* eeschema.
*/
void SendMessageToEESCHEMA( BOARD_ITEM* objectToSync );
/* Micro waves functions */
void Edit_Gap( wxDC* DC, MODULE* Module );
MODULE* Create_MuWaveBasicShape( const wxString& name, int pad_count );
MODULE* Create_MuWaveComponent( int shape_type );
MODULE* Create_MuWavePolygonShape();
void Begin_Self( wxDC* DC );
MODULE* Genere_Self( wxDC* DC );
/** function SetLanguage
* called on a language menu selection
*/
virtual void SetLanguage( wxCommandEvent& event );
DECLARE_EVENT_TABLE()
};
/*********************************************************/
/* class WinEDA_ModuleEditFrame: public WinEDA_DrawFrame */
/* Class for the footprint editor */
/*********************************************************/
class WinEDA_ModuleEditFrame : public WinEDA_BasePcbFrame
{
public:
MODULE* CurrentModule;
wxString m_CurrentLib;
public:
WinEDA_ModuleEditFrame( wxWindow* father,
const wxString& title,
const wxPoint& pos, const wxSize& size,
long style = KICAD_DEFAULT_DRAWFRAME_STYLE );
~WinEDA_ModuleEditFrame();
void InstallOptionsFrame( const wxPoint& pos );
void OnCloseWindow( wxCloseEvent& Event );
void Process_Special_Functions( wxCommandEvent& event );
void RedrawActiveWindow( wxDC* DC, bool EraseBg );
void ReCreateHToolbar();
void ReCreateVToolbar();
void ReCreateOptToolbar();
void ReCreateAuxiliaryToolbar();
void OnLeftClick( wxDC* DC, const wxPoint& MousePos );
void OnLeftDClick( wxDC* DC, const wxPoint& MousePos );
bool OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu );
void SetToolbars();
void ReCreateMenuBar();
void ToolOnRightClick( wxCommandEvent& event );
void OnSelectOptionToolbar( wxCommandEvent& event );
void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct );
void Show3D_Frame( wxCommandEvent& event );
void GeneralControle( wxDC* DC, wxPoint Mouse );
void LoadModuleFromBoard( wxCommandEvent& event );
/** Virtual Function OnModify()
* Must be called after a footprint change
* in order to set the "modify" flag of the current screen
* and prepare, if needed the refresh of the 3D frame showing the footprint
* do not forget to call the basic OnModify function to update auxiliary info
*/
virtual void OnModify( );
/** function ToPrinter
* Install the print dialog
*/
void ToPrinter( wxCommandEvent& event );
/** Virtual function PrintPage
* used to print a page
* Print the page pointed by ActiveScreen, set by the calling print function
* @param aDC = wxDC given by the calling print function
* @param aPrint_Sheet_Ref = true to print page references
* @param aPrintMask = not used here
* @param aPrintMirrorMode = not used here (Set when printing in mirror mode)
* @param aData = a pointer on an auxiliary data (NULL if not used)
*/
virtual void PrintPage( wxDC* aDC, bool aPrint_Sheet_Ref,
int aPrintMask, bool aPrintMirrorMode,
void * aData = NULL);
// BOARD handling
/** function Clear_Pcb()
* delete all and reinitialize the current board
* @param aQuery = true to prompt user for confirmation, false to
* initialize silently
*/
bool Clear_Pcb( bool aQuery );
/* handlers for block commands */
int ReturnBlockCommand( int key );
virtual void HandleBlockPlace( wxDC* DC );
virtual int HandleBlockEnd( wxDC* DC );
BOARD_ITEM* ModeditLocateAndDisplay( int aHotKeyCode = 0 );
/* Undo and redo functions */
public:
/** Function SaveCopyInUndoList.
* Creates a new entry in undo list of commands.
* add a picker to handle aItemToCopy
* @param aItem = the board item modified by the command to undo
* @param aTypeCommand = command type (see enum UndoRedoOpType)
* @param aTransformPoint = the reference point of the transformation, for
* commands like move
*/
virtual void SaveCopyInUndoList( BOARD_ITEM* aItem,
UndoRedoOpType aTypeCommand,
const wxPoint& aTransformPoint =
wxPoint( 0, 0 ) );
/** Function SaveCopyInUndoList (overloaded).
* Creates a new entry in undo list of commands.
* add a list of pickers to handle a list of items
* @param aItemsList = the list of items modified by the command to undo
* @param aTypeCommand = command type (see enum UndoRedoOpType)
* @param aTransformPoint = the reference point of the transformation, for
* commands like move
*/
virtual void SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
UndoRedoOpType aTypeCommand,
const wxPoint& aTransformPoint =
wxPoint( 0, 0 ) );
private:
void GetComponentFromUndoList( wxCommandEvent& event );
void GetComponentFromRedoList( wxCommandEvent& event );
public:
// Footprint edition
void Place_Ancre( MODULE* module );
void RemoveStruct( EDA_BaseStruct* Item );
void Transform( MODULE* module, int transform );
// loading Footprint
MODULE* Import_Module( wxDC* DC );
void Export_Module( MODULE* ptmod, bool createlib );
void Load_Module_From_BOARD( MODULE* Module );
// functions to edit footprint edges
/**
* Function Edit_Edge_Width
* changes the width of module perimeter lines, EDGE_MODULEs.
* @param ModuleSegmentWidth (global) = new width
* @param Edge = edge to edit, or NULL. If Edge == NULL change
* the width of all the footprint's edges
* @param DC = current Device Context
*/
void Edit_Edge_Width( EDGE_MODULE* Edge );
void Edit_Edge_Layer( EDGE_MODULE* Edge );
void Delete_Edge_Module( EDGE_MODULE* Edge );
EDGE_MODULE* Begin_Edge_Module( EDGE_MODULE* Edge, wxDC* DC, int type_edge );
void End_Edge_Module( EDGE_MODULE* Edge, wxDC* DC );
void Enter_Edge_Width( EDGE_MODULE* Edge, wxDC* DC );
void Start_Move_EdgeMod( EDGE_MODULE* drawitem, wxDC* DC );
void Place_EdgeMod( EDGE_MODULE* drawitem, wxDC* DC );
// handlers for libraries:
void Delete_Module_In_Library( const wxString& libname );
int Create_Librairie( const wxString& LibName );
void Select_Active_Library();
DECLARE_EVENT_TABLE()
};
#endif /* WXPCB_STRUCT_H */