/***************/ /* hotkeys.cpp */ /***************/ #include "fctsys.h" #include "gr_basic.h" #include "common.h" #include "pcbnew.h" #include "id.h" #include "hotkeys.h" #include "protos.h" /* How to add a new hotkey: * add a new id in the enum hotkey_id_commnand like MY_NEW_ID_FUNCTION. * add a new Ki_HotkeyInfo entry like: * static Ki_HotkeyInfo HkMyNewEntry(wxT("Command Label"), MY_NEW_ID_FUNCTION, default key value); * "Command Label" is the name used in hotkey list display, and the identifier in the hotkey list file * MY_NEW_ID_FUNCTION is an equivalent id function used in the switch in OnHotKey() function. * default key value is the default hotkey for this command. Can be overrided by the user hotkey list file * add the HkMyNewEntry pointer in the s_board_edit_Hotkey_List list ( or/and the s_module_edit_Hotkey_List list) * Add the new code in the switch in OnHotKey() function. * when the variable PopupOn is true, an item is currently edited. * This can be usefull if the new function cannot be executed while an item is currently being edited * ( For example, one cannot start a new wire when a component is moving.) * * Note: If an hotkey is a special key be sure the corresponding wxWidget keycode (WXK_XXXX) * is handled in the hotkey_name_descr s_Hotkey_Name_List list (see hotkeys_basic.cpp) * and see this list for some ascii keys (space ...) */ /* local variables */ /* Hotkey list: */ static Ki_HotkeyInfo HkSwitch2CopperLayer( wxT( "Switch to Copper layer" ), HK_SWITCH_LAYER_TO_COPPER, '-' ); static Ki_HotkeyInfo HkSwitch2ComponentLayer( wxT( "Switch to Component layer" ), HK_SWITCH_LAYER_TO_COMPONENT, '+' ); static Ki_HotkeyInfo HkSwitch2InnerLayer1( wxT( "Switch to Inner layer 1" ), HK_SWITCH_LAYER_TO_INNER1, WXK_F5 ); static Ki_HotkeyInfo HkSwitch2InnerLayer2( wxT( "Switch to Inner layer 2" ), HK_SWITCH_LAYER_TO_INNER2, WXK_F6 ); static Ki_HotkeyInfo HkSwitch2InnerLayer3( wxT( "Switch to Inner layer 3" ), HK_SWITCH_LAYER_TO_INNER3, WXK_F7 ); static Ki_HotkeyInfo HkSwitch2InnerLayer4( wxT( "Switch to Inner layer 4" ), HK_SWITCH_LAYER_TO_INNER4, WXK_F8 ); static Ki_HotkeyInfo HkSwitch2InnerLayer5( wxT( "Switch to Inner layer 5" ), HK_SWITCH_LAYER_TO_INNER5, WXK_F9 ); static Ki_HotkeyInfo HkSwitch2InnerLayer6( wxT( "Switch to Inner layer 6" ), HK_SWITCH_LAYER_TO_INNER6, WXK_F10 ); static Ki_HotkeyInfo HkSavefile( wxT( "Save board" ), HK_SAVE_BOARD, 'S' + GR_KB_CTRL ); static Ki_HotkeyInfo HkLoadfile( wxT( "Load board" ), HK_LOAD_BOARD, 'L' + GR_KB_CTRL ); static Ki_HotkeyInfo HkFindItem( wxT( "Find Item" ), HK_FIND_ITEM, 'F' + GR_KB_CTRL ); static Ki_HotkeyInfo HkBackspace( wxT( "Delete track segment" ), HK_BACK_SPACE, WXK_BACK ); static Ki_HotkeyInfo HkAddVia( wxT( "Add Via" ), HK_ADD_VIA, 'V' ); static Ki_HotkeyInfo HkEndTrack( wxT( "End Track" ), HK_END_TRACK, WXK_END ); static Ki_HotkeyInfo HkFlipFootprint( wxT( "Flip Footprint" ), HK_FLIP_FOOTPRINT, 'F' ); static Ki_HotkeyInfo HkRotateFootprint( wxT( "Rotate Footprint" ), HK_ROTATE_FOOTPRINT, 'R' ); static Ki_HotkeyInfo HkMoveFootprint( wxT( "Move Footprint" ), HK_MOVE_FOOTPRINT, 'M' ); static Ki_HotkeyInfo HkDragFootprint( wxT( "Drag Footprint" ), HK_DRAG_FOOTPRINT, 'G' ); static Ki_HotkeyInfo HkLock_Unlock_Footprint( wxT( "Lock/Unlock Footprint" ), HK_LOCK_UNLOCK_FOOTPRINT, 'L' ); static Ki_HotkeyInfo HkDelete( wxT( "Delete Track or Footprint" ), HK_DELETE, WXK_DELETE ); static Ki_HotkeyInfo HkResetLocalCoord( wxT( "Reset local coord." ), HK_RESET_LOCAL_COORD, ' ' ); static Ki_HotkeyInfo HkZoomCenter( wxT( "Zoom Center" ), HK_ZOOM_CENTER, WXK_F4 ); static Ki_HotkeyInfo HkZoomRedraw( wxT( "Zoom Redraw" ), HK_ZOOM_REDRAW, WXK_F3 ); static Ki_HotkeyInfo HkZoomOut( wxT( "Zoom Out" ), HK_ZOOM_OUT, WXK_F2 ); static Ki_HotkeyInfo HkZoomIn( wxT( "Zoom In" ), HK_ZOOM_IN, WXK_F1 ); static Ki_HotkeyInfo HkHelp( wxT( "Help: this message" ), HK_HELP, '?' ); static Ki_HotkeyInfo HkSwitchUnits( wxT( "Switch Units" ), HK_SWITCH_UNITS, 'U' ); static Ki_HotkeyInfo HkTrackDisplayMode( wxT( "Track Display Mode" ), HK_SWITCH_TRACK_DISPLAY_MODE, 'F' ); // List of hotkey descriptors for pcbnew Ki_HotkeyInfo* s_board_edit_Hotkey_List[] = { &HkHelp, &HkZoomIn, &HkZoomOut, &HkZoomRedraw, &HkZoomCenter, &HkResetLocalCoord, &HkSwitchUnits, &HkTrackDisplayMode, &HkDelete, &HkBackspace, &HkAddVia, &HkEndTrack, &HkMoveFootprint, &HkFlipFootprint, &HkRotateFootprint, &HkDragFootprint, &HkLock_Unlock_Footprint, &HkSavefile, &HkLoadfile, &HkFindItem, &HkSwitch2CopperLayer, &HkSwitch2InnerLayer1, &HkSwitch2InnerLayer2, &HkSwitch2InnerLayer3, &HkSwitch2InnerLayer4, &HkSwitch2InnerLayer5, &HkSwitch2InnerLayer6, &HkSwitch2ComponentLayer, NULL }; // List of hotkey descriptors for the module editor Ki_HotkeyInfo* s_module_edit_Hotkey_List[] = { &HkHelp, &HkZoomIn, &HkZoomOut, &HkZoomRedraw, &HkZoomCenter, &HkSwitchUnits, &HkResetLocalCoord, &HkDelete, &HkBackspace, NULL }; /***********************************************************/ void WinEDA_PcbFrame::OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct ) /***********************************************************/ /* Hot keys. Some commands are relatives to the item under the mouse cursor * Commands are case insensitive * Zoom commands are not managed here * @param DC = current device context * @param hotkey = hothey code (ascii or wxWidget code for special keys) * @param DrawStruct = NULL or pointer on a EDA_BaseStruct under the mouse cursor */ { bool PopupOn = GetScreen()->GetCurItem() && GetScreen()->GetCurItem()->m_Flags; bool ItemFree = (GetScreen()->GetCurItem() == 0 ) || (GetScreen()->GetCurItem()->m_Flags == 0); if( hotkey == 0 ) return; MODULE* module = NULL; // Remap the control key Ctrl A (0x01) to GR_KB_CTRL + 'A' (easier to handle...) if( (hotkey & GR_KB_CTRL) != 0 ) hotkey += 'A' - 1; /* Convert lower to upper case (the usual toupper function has problem with non ascii codes like function keys */ if( (hotkey >= 'a') && (hotkey <= 'z') ) hotkey += 'A' - 'a'; int CommandCode = GetCommandCodeFromHotkey( hotkey, s_board_edit_Hotkey_List ); int ll; switch( CommandCode ) { default: case HK_NOT_FOUND: return; break; case HK_SWITCH_LAYER_TO_PREVIOUS: ll = GetScreen()->m_Active_Layer; if( ll > CMP_N ) break; if( ll <= CUIVRE_N ) break; if( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1 ) // Single layer ll = CUIVRE_N; if( ll == CMP_N ) ll = MAX( CUIVRE_N, m_Pcb->m_BoardSettings->m_CopperLayerCount - 2 ); else if( ll > CUIVRE_N ) ll--; SwitchLayer( DC, ll ); break; case HK_SWITCH_LAYER_TO_NEXT: ll = GetScreen()->m_Active_Layer; if( ll >= CMP_N ) break; ll++; if( ll >= m_Pcb->m_BoardSettings->m_CopperLayerCount - 1 ) ll = CMP_N; if( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1 ) // Single layer ll = CUIVRE_N; SwitchLayer( DC, ll ); break; case HK_SWITCH_LAYER_TO_COMPONENT: SwitchLayer( DC, CMP_N ); break; case HK_SWITCH_LAYER_TO_COPPER: SwitchLayer( DC, CUIVRE_N ); break; case HK_SWITCH_LAYER_TO_INNER1: SwitchLayer( DC, LAYER_N_2 ); break; case HK_SWITCH_LAYER_TO_INNER2: SwitchLayer( DC, LAYER_N_3 ); break; case HK_SWITCH_LAYER_TO_INNER3: SwitchLayer( DC, LAYER_N_4 ); break; case HK_SWITCH_LAYER_TO_INNER4: SwitchLayer( DC, LAYER_N_5 ); break; case HK_SWITCH_LAYER_TO_INNER5: SwitchLayer( DC, LAYER_N_6 ); break; case HK_SWITCH_LAYER_TO_INNER6: SwitchLayer( DC, LAYER_N_7 ); break; case HK_HELP: // Display Current hotkey list DisplayHotkeyList( this, s_board_edit_Hotkey_List ); break; case HK_ZOOM_IN: OnZoom( ID_ZOOM_PLUS_KEY ); break; case HK_ZOOM_OUT: OnZoom( ID_ZOOM_MOINS_KEY ); break; case HK_ZOOM_REDRAW: OnZoom( ID_ZOOM_REDRAW_KEY ); break; case HK_ZOOM_CENTER: OnZoom( ID_ZOOM_CENTER_KEY ); break; case HK_RESET_LOCAL_COORD: /*Reset the relative coord */ GetScreen()->m_O_Curseur = GetScreen()->m_Curseur; break; case HK_SWITCH_UNITS: g_UnitMetric = (g_UnitMetric == INCHES ) ? MILLIMETRE : INCHES; break; case HK_SWITCH_TRACK_DISPLAY_MODE: DisplayOpt.DisplayPcbTrackFill ^= 1; DisplayOpt.DisplayPcbTrackFill &= 1; GetScreen()->SetRefreshReq(); break; case HK_DELETE: OnHotkeyDeleteItem( DC, DrawStruct ); break; case HK_BACK_SPACE: if( m_ID_current_state == ID_TRACK_BUTT && GetScreen()->m_Active_Layer <= CMP_N ) { bool ItemFree = (GetScreen()->GetCurItem() == NULL ) || (GetScreen()->GetCurItem()->m_Flags == 0); if( ItemFree ) { // no track is currently being edited - select a segment and remove it. DrawStruct = PcbGeneralLocateAndDisplay(); // don't let backspace delete modules!! if( DrawStruct && (DrawStruct->m_StructType == TYPETRACK || DrawStruct->m_StructType == TYPEVIA) ) Delete_Segment( DC, (TRACK*) DrawStruct ); GetScreen()->SetModify(); } else if( GetScreen()->GetCurItem()->m_StructType == TYPETRACK ) { // then an element is being edited - remove the last segment. GetScreen()->SetCurItem( Delete_Segment( DC, (TRACK*) GetScreen()->GetCurItem() ) ); GetScreen()->SetModify(); } } break; case HK_END_TRACK: DrawPanel->MouseToCursorSchema(); End_Route( (TRACK*) ( GetScreen()->GetCurItem() ), DC ); break; case HK_FIND_ITEM: { wxCommandEvent evt; evt.SetId( ID_FIND_ITEMS ); Process_Special_Functions( evt ); } break; case HK_LOAD_BOARD: { // try not to duplicate save, load code etc. wxCommandEvent evt; evt.SetId( ID_LOAD_FILE ); Files_io( evt ); } break; case HK_SAVE_BOARD: { // try not to duplicate save, load code etc. wxCommandEvent evt; evt.SetId( ID_SAVE_BOARD ); Files_io( evt ); } break; case HK_ADD_VIA: // Switch to alternate layer and Place a via if a track is in progress if( m_ID_current_state != ID_TRACK_BUTT ) return; if( ItemFree ) { Other_Layer_Route( NULL, DC ); break; } if( GetScreen()->GetCurItem()->m_StructType != TYPETRACK ) return; if( (GetScreen()->GetCurItem()->m_Flags & IS_NEW) == 0 ) return; Other_Layer_Route( (TRACK*) GetScreen()->GetCurItem(), DC ); if( DisplayOpt.ContrastModeDisplay ) GetScreen()->SetRefreshReq(); break; // Footprint edition: case HK_LOCK_UNLOCK_FOOTPRINT: // toggle module "MODULE_is_LOCKED" status: // get any module, locked or not locked and toggle its locked status if( ItemFree ) module = Locate_Prefered_Module( m_Pcb, CURSEUR_OFF_GRILLE | VISIBLE_ONLY ); else if( GetScreen()->GetCurItem()->m_StructType == TYPEMODULE ) module = (MODULE*) GetScreen()->GetCurItem(); if( module ) { GetScreen()->SetCurItem( module ); module->SetLocked( !module->IsLocked() ); module->Display_Infos( this ); } break; case HK_DRAG_FOOTPRINT: // Start move (and drag) module case HK_MOVE_FOOTPRINT: // Start move module if( PopupOn ) break; case HK_ROTATE_FOOTPRINT: // Rotation case HK_FLIP_FOOTPRINT: // move to other side if( ItemFree ) { module = Locate_Prefered_Module( m_Pcb, CURSEUR_OFF_GRILLE | IGNORE_LOCKED | VISIBLE_ONLY #if defined (USE_MATCH_LAYER) | MATCH_LAYER #endif ); if( module == NULL ) // no footprint found { module = Locate_Prefered_Module( m_Pcb, CURSEUR_OFF_GRILLE ); if( module ) { // a footprint is found, but locked or on an other layer if( module->IsLocked() ) { wxString msg; msg.Printf( _( "Footprint %s found, but locked" ), module->m_Reference->m_Text.GetData() ); DisplayInfo( this, msg ); } module = NULL; } } } else if( GetScreen()->GetCurItem()->m_StructType == TYPEMODULE ) { module = (MODULE*) GetScreen()->GetCurItem(); // @todo: might need to add a layer check in if() below if( (GetScreen()->GetCurItem()->m_Flags == 0) && module->IsLocked() ) module = NULL; // do not move, rotate ... it. } if( module == NULL ) break; /* I'd like to make sending to EESCHEMA edge triggered, but the * simple mouse click on a module when the arrow icon is in play * does not set GetCurItem() at this time, nor does a mouse click * when the local ratsnest icon is in play set GetCurItem(), and these * actions also call SendMessageToEESCHEMA(). * if( GetScreen()->GetCurItem() != module ) */ { // Send the module via socket to EESCHEMA's search facility. SendMessageToEESCHEMA( module ); GetScreen()->SetCurItem( module ); } switch( CommandCode ) { case HK_ROTATE_FOOTPRINT: // Rotation Rotate_Module( DC, module, 900, TRUE ); break; case HK_FLIP_FOOTPRINT: // move to other side Change_Side_Module( module, DC ); break; case HK_DRAG_FOOTPRINT: // Start move (and drag) module g_Drag_Pistes_On = TRUE; // fall through case HK_MOVE_FOOTPRINT: // Start move module StartMove_Module( module, DC ); break; } module->Display_Infos( this ); break; } } /***********************************************************/ void WinEDA_ModuleEditFrame::OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct ) /***********************************************************/ /* Gestion des commandes rapides (Raccourcis claviers) concernant l'element * sous le courseur souris * Les majuscules/minuscules sont indifferenciees */ { if( hotkey == 0 ) return; /* Convert lower to upper case (the usual toupper function has problem with non ascii codes like function keys */ if( (hotkey >= 'a') && (hotkey <= 'z') ) hotkey += 'A' - 'a'; int CommandCode = GetCommandCodeFromHotkey( hotkey, s_module_edit_Hotkey_List ); switch( CommandCode ) { default: case HK_NOT_FOUND: return; break; case HK_HELP: // Display Current hotkey list DisplayHotkeyList( this, s_module_edit_Hotkey_List ); break; case HK_RESET_LOCAL_COORD: /*Reset the relative coord */ GetScreen()->m_O_Curseur = GetScreen()->m_Curseur; break; case HK_SWITCH_UNITS: g_UnitMetric = (g_UnitMetric == INCHES ) ? MILLIMETRE : INCHES; break; case HK_ZOOM_IN: OnZoom( ID_ZOOM_PLUS_KEY ); break; case HK_ZOOM_OUT: OnZoom( ID_ZOOM_MOINS_KEY ); break; case HK_ZOOM_REDRAW: OnZoom( ID_ZOOM_REDRAW_KEY ); break; case HK_ZOOM_CENTER: OnZoom( ID_ZOOM_CENTER_KEY ); break; } } /******************************************************************************/ bool WinEDA_PcbFrame::OnHotkeyDeleteItem( wxDC* DC, EDA_BaseStruct* DrawStruct ) /******************************************************************************/ /* Efface l'item pointe par la souris, en reponse a la touche "Del" * Effet dependant de l'outil selectionne: * Outil trace de pistes * Efface le segment en cours ou la piste si pas d'element * Outil module: * Efface le module. */ { bool ItemFree = (GetScreen()->GetCurItem() == NULL ) || (GetScreen()->GetCurItem()->m_Flags == 0); switch( m_ID_current_state ) { case ID_TRACK_BUTT: if( GetScreen()->m_Active_Layer > CMP_N ) return FALSE; if( ItemFree ) { DrawStruct = PcbGeneralLocateAndDisplay(); if( DrawStruct && DrawStruct->m_StructType != TYPETRACK ) return FALSE; Delete_Track( DC, (TRACK*) DrawStruct ); } else if( GetScreen()->GetCurItem()->m_StructType == TYPETRACK ) { GetScreen()->SetCurItem( Delete_Segment( DC, (TRACK*) GetScreen()->GetCurItem() ) ); GetScreen()->SetModify(); return TRUE; } break; case ID_COMPONENT_BUTT: if( ItemFree ) { MODULE* module = Locate_Prefered_Module( m_Pcb, CURSEUR_ON_GRILLE ); if( module == NULL ) return FALSE; if( !IsOK( this, _( "Delete module?" ) ) ) return FALSE; RemoveStruct( module, DC ); } else return FALSE; break; default: return FALSE; } GetScreen()->SetModify(); GetScreen()->SetCurItem( NULL ); return TRUE; }